text
stringlengths 0
2.74k
|
|---|
; generated by PrusaSlicer 2.1.1+ on 2020-04-08 at 01:19:35 UTC |
; |
; external perimeters extrusion width = 0.60mm |
; perimeters extrusion width = 0.50mm |
; infill extrusion width = 0.50mm |
; solid infill extrusion width = 0.50mm |
; top infill extrusion width = 0.45mm |
; first layer extrusion width = 0.42mm |
M73 P0 R177 |
M73 Q0 S178 |
M201 X1000 Y1000 Z1000 E5000 ; sets maximum accelerations, mm/sec^2 |
M203 X200 Y200 Z12 E120 ; sets maximum feedrates, mm/sec |
M204 P1250 R1250 T1250 ; sets acceleration (P, T) and retract acceleration (R), mm/sec^2 |
M205 X8.00 Y8.00 Z0.40 E4.50 ; sets the jerk limits, mm/sec |
M205 S0 T0 ; sets the minimum extruding and travel feed rate, mm/sec |
M107 |
M862.3 P "MK3S" ; printer model check |
M862.1 P0.4 ; nozzle diameter check |
M115 U3.8.1 ; tell printer latest fw version |
G90 ; use absolute coordinates |
M83 ; extruder relative mode |
M104 S215 ; set extruder temp |
M140 S60 ; set bed temp |
M190 S60 ; wait for bed temp |
M109 S215 ; wait for extruder temp |
G28 W ; home all without mesh bed level |
G80 ; mesh bed leveling |
G1 Y-3.0 F1000.0 ; go outside print area |
G92 E0.0 |
G1 X60.0 E9.0 F1000.0 ; intro line |
M73 Q0 S178 |
M73 P0 R177 |
G1 X100.0 E12.5 F1000.0 ; intro line |
G92 E0.0 |
M221 S95 |
G21 ; set units to millimeters |
G90 ; use absolute coordinates |
M83 ; use relative distances for extrusion |
M900 K30 ; Filament gcode |
;BEFORE_LAYER_CHANGE |
G92 E0.0 |
;0.2 |
G1 E-0.80000 F2100.00000 |
G1 Z0.600 F10800.000 |
;AFTER_LAYER_CHANGE |
;0.2 |
G1 X145.215 Y20.499 |
G1 Z0.200 |
G1 E0.80000 F2100.00000 |
M204 S1000 |
G1 F1200 |
G1 X169.618 Y24.030 E0.77310 |
G1 X177.036 Y25.242 E0.23567 |
G1 X184.219 Y26.873 E0.23096 |
G1 X191.104 Y28.913 E0.22515 |
G1 X197.402 Y31.265 E0.21079 |
G1 X205.853 Y34.739 E0.28647 |
G1 X208.596 Y36.102 E0.09607 |
G1 X211.507 Y38.084 E0.11041 |
G1 X214.473 Y40.612 E0.12219 |
G1 X217.520 Y43.689 E0.13577 |
G1 X220.642 Y47.296 E0.14958 |
G1 X223.876 Y51.472 E0.16560 |
G1 X227.206 Y56.190 E0.18108 |
G1 X228.837 Y58.706 E0.09402 |
G1 X230.399 Y61.486 E0.09996 |
G1 X231.937 Y64.632 E0.10983 |
G1 X233.331 Y67.889 E0.11106 |
G1 X234.671 Y71.453 E0.11940 |
G1 X235.923 Y75.234 E0.12489 |
G1 X239.710 Y87.749 E0.40996 |
G1 X240.941 Y92.180 E0.14419 |
G1 X241.841 Y96.695 E0.14435 |
G1 X242.388 Y101.205 E0.14246 |
G1 X242.585 Y105.731 E0.14201 |
G1 X242.433 Y110.245 E0.14163 |
G1 X241.931 Y114.790 E0.14338 |
G1 X240.481 Y124.167 E0.29749 |
G1 X237.902 Y134.971 E0.34826 |
G1 X235.427 Y143.250 E0.27096 |
G1 X232.211 Y151.086 E0.26558 |
G1 X228.443 Y158.054 E0.24837 |
G1 X224.013 Y164.407 E0.24285 |
G1 X218.801 Y170.263 E0.24579 |
G1 X212.895 Y175.448 E0.24641 |
G1 X201.913 Y183.082 E0.41938 |
G1 X196.461 Y185.827 E0.19139 |
G1 X190.354 Y187.966 E0.20287 |
G1 X183.388 Y189.558 E0.22405 |
G1 X175.837 Y190.531 E0.23872 |
G1 X140.467 Y192.302 E1.11039 |
G1 X137.791 Y192.176 E0.08399 |
G1 X50.848 Y174.102 E2.78433 |
G1 X46.653 Y172.733 E0.13834 |
G1 X42.728 Y170.819 E0.13691 |
End of preview. Expand
in Dataset Viewer.
YAML Metadata
Warning:
empty or missing yaml metadata in repo card
(https://huggingface.co/docs/hub/datasets-cards)
- Downloads last month
- 1