question
stringlengths 43
113
| answer
stringlengths 39
283
| text
stringlengths 228
511
|
|---|---|---|
How to configure SONET/SDH interface on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# controller sonet 0/2/0/2
RP/0/RP0/CPU0:router(config-sonet)# | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SONET/SDH interface on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# controller sonet 0/2/0/2
RP/0/RP0/CPU0:router(config-sonet)# |
How to configure a RADIUS server group for RADIUS servers on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# aaa group server radius | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a RADIUS server group for RADIUS servers on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# aaa group server radius |
How to set up QoS for video services in an SBC configuration on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos video residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-video)# marking dscp | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to set up QoS for video services in an SBC configuration on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos video residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-video)# marking dscp |
How to define a routing policy set within an SBC SBE on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1
RP/0/RP0/CPU0:router(config-sbc-sbe-rtgpolicy)# | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to define a routing policy set within an SBC SBE on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1
RP/0/RP0/CPU0:router(config-sbc-sbe-rtgpolicy)# |
How to configure an OSPF area as a stub area on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router ospf 100
RP/0/RP0/CPU0:router(config-router)# area 0
RP/0/RP0/CPU0:router(config-router-ospf)# area 0 stub | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an OSPF area as a stub area on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router ospf 100
RP/0/RP0/CPU0:router(config-router)# area 0
RP/0/RP0/CPU0:router(config-router-ospf)# area 0 stub |
How to create a VRF and assign an interface to it in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# vrf MyVRF
RP/0/RP0/CPU0:router(config-vrf)# address-family ipv4 unicast
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# vrf MyVRF | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create a VRF and assign an interface to it in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# vrf MyVRF
RP/0/RP0/CPU0:router(config-vrf)# address-family ipv4 unicast
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# vrf MyVRF |
How to configure a fankosh peer group and apply it to a neighbor in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router fankosh 65000
RP/0/RP0/CPU0:router(config-fankosh)# neighbor-group MyGroup
RP/0/RP0/CPU0:router(config-fankosh)# neighbor 192.168.1.1
RP/0/RP0/CPU0:router(config-fankosh-nbr)# use neighbor-group MyGroup | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a fankosh peer group and apply it to a neighbor in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router fankosh 65000
RP/0/RP0/CPU0:router(config-fankosh)# neighbor-group MyGroup
RP/0/RP0/CPU0:router(config-fankosh)# neighbor 192.168.1.1
RP/0/RP0/CPU0:router(config-fankosh-nbr)# use neighbor-group MyGroup |
How to configure DBE H248 controllers within an SBC instance named mySBC in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC dbe vdbe
RP/0/RP0/CPU0:router(config-sbc-dbe-vdbe)# controller h248 1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure DBE H248 controllers within an SBC instance named mySBC in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC dbe vdbe
RP/0/RP0/CPU0:router(config-sbc-dbe-vdbe)# controller h248 1 |
How to define a user group in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# usergroup alpha
RP/0/RP0/CPU0:router(config-ug)# inherit | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to define a user group in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# usergroup alpha
RP/0/RP0/CPU0:router(config-ug)# inherit |
How to configure OSPF to advertise a loopback interface in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router ospf 1
RP/0/RP0/CPU0:router(config-router)# area 0
RP/0/RP0/CPU0:router(config-router-ospf)# interface Loopback0
RP/0/RP0/CPU0:router(config-router-ospf-if)# passive | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure OSPF to advertise a loopback interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router ospf 1
RP/0/RP0/CPU0:router(config-router)# area 0
RP/0/RP0/CPU0:router(config-router-ospf)# interface Loopback0
RP/0/RP0/CPU0:router(config-router-ospf-if)# passive |
How to create a RADIUS accounting client named radius1 within an SBC instance on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# radius-account radius1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create a RADIUS accounting client named radius1 within an SBC instance on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# radius-account radius1 |
How to set up a task group in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# taskgroup alpha
RP/0/RP0/CPU0:router(config-tg)# | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to set up a task group in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# taskgroup alpha
RP/0/RP0/CPU0:router(config-tg)# |
How to configure a DWDM controller for interface 0/6/0/0 on Cisco IOS XR? | RP/0/0/CPU0:router(config)# controller dwdm 0/6/0/0 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a DWDM controller for interface 0/6/0/0 on Cisco IOS XR?
### Response:
RP/0/0/CPU0:router(config)# controller dwdm 0/6/0/0 |
How to configure a subinterface on a TenGigE interface in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# interface TenGigE 0/2/0/4.1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a subinterface on a TenGigE interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# interface TenGigE 0/2/0/4.1 |
How to create an access list and apply it to an interface for IP filtering in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ipv4 access-list ACL-NAME
RP/0/RP0/CPU0:router(config-ipv4-acl)# permit ip any any
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# ipv4 access-group ACL-NAME in | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create an access list and apply it to an interface for IP filtering in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ipv4 access-list ACL-NAME
RP/0/RP0/CPU0:router(config-ipv4-acl)# permit ip any any
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# ipv4 access-group ACL-NAME in |
How to configure a router to use a specific interface as the source for all outgoing NTP packets on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# source interface Loopback0 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a router to use a specific interface as the source for all outgoing NTP packets on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# source interface Loopback0 |
How to configure SBC SBE SIP adjacency on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe adjacency sip SipToIsp42 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE SIP adjacency on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe adjacency sip SipToIsp42 |
How to configure a POS interface with CRC 32 on Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface POS 0/1/0/2
RP/0/RP0/CPU0:router(config-if)# pos
RP/0/RP0/CPU0:router(config-if-pos)# crc 32 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a POS interface with CRC 32 on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface POS 0/1/0/2
RP/0/RP0/CPU0:router(config-if)# pos
RP/0/RP0/CPU0:router(config-if-pos)# crc 32 |
How to create and configure a fankosh neighbor group named 'external' for IPv4 unicast on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router fankosh 65000
RP/0/RP0/CPU0:router(config-fankosh)# neighbor-group external
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# remote-as 65001
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# address-family ipv4 unicast | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create and configure a fankosh neighbor group named 'external' for IPv4 unicast on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router fankosh 65000
RP/0/RP0/CPU0:router(config-fankosh)# neighbor-group external
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# remote-as 65001
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# address-family ipv4 unicast |
How do you configure an fankosh fankosh interface to use a specific transport address on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh fankosh interface POS 0/1/0/0
RP/0/RP0/CPU0:router(config-fankosh-if)# discovery transport-address 10.10.3.1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you configure an fankosh fankosh interface to use a specific transport address on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh fankosh interface POS 0/1/0/0
RP/0/RP0/CPU0:router(config-fankosh-if)# discovery transport-address 10.10.3.1 |
How to configure a transport profile in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# crypto ipsec transport | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a transport profile in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# crypto ipsec transport |
How to configure QoS for FAX in SBC SBE on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc MySbc sbe qos fax residential marking dscp | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure QoS for FAX in SBC SBE on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc MySbc sbe qos fax residential marking dscp |
How to create an SBC instance named mySBC in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create an SBC instance named mySBC in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC |
How to enter SBE configuration mode for an SBC service instance named mySBC in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC
RP/0/RP0/CPU0:router(config-sbc)# sbe | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to enter SBE configuration mode for an SBC service instance named mySBC in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC
RP/0/RP0/CPU0:router(config-sbc)# sbe |
How to create and configure a MSDP peer in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router msdp
RP/0/RP0/CPU0:router(config-msdp)# peer 192.168.1.1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create and configure a MSDP peer in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router msdp
RP/0/RP0/CPU0:router(config-msdp)# peer 192.168.1.1 |
How to configure SBC DBE media address on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC dbe media-address vrf vpn3 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC DBE media address on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC dbe media-address vrf vpn3 |
How to configure RSVP to limit bandwidth reservations on a POS interface in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# rsvp interface pos 0/3/0/0
RP/0/RP0/CPU0:router(config-rsvp-if)# bandwidth 7500 1000 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure RSVP to limit bandwidth reservations on a POS interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# rsvp interface pos 0/3/0/0
RP/0/RP0/CPU0:router(config-rsvp-if)# bandwidth 7500 1000 |
How to configure fankosh OAM to enable LSP verification on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh oam
RP/0/RP0/CPU0:router(config-oam)# lsp verify | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure fankosh OAM to enable LSP verification on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh oam
RP/0/RP0/CPU0:router(config-oam)# lsp verify |
How to configure a routing policy within an SBE entity in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a routing policy within an SBE entity in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1 |
How to configure an HSRP group on an interface and set its priority in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# hsrp version 2
RP/0/RP0/CPU0:router(config-if-hsrp)# hsrp 1
RP/0/RP0/CPU0:router(config-if-hsrp)# priority 110 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an HSRP group on an interface and set its priority in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# hsrp version 2
RP/0/RP0/CPU0:router(config-if-hsrp)# hsrp 1
RP/0/RP0/CPU0:router(config-if-hsrp)# priority 110 |
How to enable multicast routing and specify a Source-Specific Multicast (SSM) range on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# multicast-routing
RP/0/RP0/CPU0:router(config-mcast)# ssm range access-list SSM-ACL | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to enable multicast routing and specify a Source-Specific Multicast (SSM) range on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# multicast-routing
RP/0/RP0/CPU0:router(config-mcast)# ssm range access-list SSM-ACL |
How to configure a VRRP interface on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router vrrp
RP/0/RP0/CPU0:router(config-vrrp)# interface TenGigE 0/3/0/0 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a VRRP interface on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router vrrp
RP/0/RP0/CPU0:router(config-vrrp)# interface TenGigE 0/3/0/0 |
How to set up a task group in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# taskgroup alpha | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to set up a task group in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# taskgroup alpha |
How to create and configure a fankosh neighbor group for IPv4 unicast on Cisco IOS XR? | RP/0/RP0/CPU0:router(config-fankosh)# neighbor-group rrclients
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# remote-as 65534
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# address-family ipv4 unicast | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create and configure a fankosh neighbor group for IPv4 unicast on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config-fankosh)# neighbor-group rrclients
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# remote-as 65534
RP/0/RP0/CPU0:router(config-fankosh-nbrgrp)# address-family ipv4 unicast |
How to enable RSVP-TE on an interface and configure its bandwidth reservation in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# fankosh traffic-eng
RP/0/RP0/CPU0:router(config-fankosh-te)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-fankosh-te-if)# bandwidth 1000 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to enable RSVP-TE on an interface and configure its bandwidth reservation in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# fankosh traffic-eng
RP/0/RP0/CPU0:router(config-fankosh-te)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-fankosh-te-if)# bandwidth 1000 |
How to configure SBC vDBE H248 controller on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC dbe vdbe controller h248 1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC vDBE H248 controller on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC dbe vdbe controller h248 1 |
How to configure an IPv6 prefix list and apply it to fankosh in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ipv6 prefix-list PL-NAME permit 2001:DB8::/32
RP/0/RP0/CPU0:router(config)# router fankosh 65000
RP/0/RP0/CPU0:router(config-fankosh)# address-family ipv6
RP/0/RP0/CPU0:router(config-fankosh-af)# prefix-list PL-NAME in | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an IPv6 prefix list and apply it to fankosh in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ipv6 prefix-list PL-NAME permit 2001:DB8::/32
RP/0/RP0/CPU0:router(config)# router fankosh 65000
RP/0/RP0/CPU0:router(config-fankosh)# address-family ipv6
RP/0/RP0/CPU0:router(config-fankosh-af)# prefix-list PL-NAME in |
How to specify a crypto IPSec profile with extended authentication in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# crypto ipsec profile sampleX
RP/0/RP0/CPU0:router(config-sampleX)# client authentication list list0 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to specify a crypto IPSec profile with extended authentication in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# crypto ipsec profile sampleX
RP/0/RP0/CPU0:router(config-sampleX)# client authentication list list0 |
How to configure SBC SBE H.323 adjacency on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe adjacency h323 h323ToIsp42 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE H.323 adjacency on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe adjacency h323 h323ToIsp42 |
How to configure SBC SBE RADIUS account on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe radius-account radius1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE RADIUS account on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe radius-account radius1 |
How to configure an NTP source interface on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# source POS 0/0/0/1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an NTP source interface on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# source POS 0/0/0/1 |
How do you configure an IPsec transport profile on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# crypto ipsec transport
RP/0/RP0/CPU0:router(config-transport)# profile pn1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you configure an IPsec transport profile on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# crypto ipsec transport
RP/0/RP0/CPU0:router(config-transport)# profile pn1 |
How to configure fankosh OAM on a device in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# fankosh oam | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure fankosh OAM on a device in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# fankosh oam |
How to enable graceful restart for fankosh fankosh on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# graceful-restart | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to enable graceful restart for fankosh fankosh on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# graceful-restart |
How do you create a policy map and assign bandwidth percentages to classes on Cisco IOS XR? | RP/0/RP1/CPU0:router(config)# policy-map policy1
RP/0/RP1/CPU0:router(config-pmap)# class class1
RP/0/RP1/CPU0:router(config-pmap-c)# bandwidth percent 50
RP/0/RP1/CPU0:router(config-pmap)# class class2
RP/0/RP1/CPU0:router(config-pmap-c)# bandwidth percent 10 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you create a policy map and assign bandwidth percentages to classes on Cisco IOS XR?
### Response:
RP/0/RP1/CPU0:router(config)# policy-map policy1
RP/0/RP1/CPU0:router(config-pmap)# class class1
RP/0/RP1/CPU0:router(config-pmap-c)# bandwidth percent 50
RP/0/RP1/CPU0:router(config-pmap)# class class2
RP/0/RP1/CPU0:router(config-pmap-c)# bandwidth percent 10 |
How to configure a transport profile in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# crypto ipsec transport
RP/0/RP0/CPU0:router(config-transport)# | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a transport profile in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# crypto ipsec transport
RP/0/RP0/CPU0:router(config-transport)# |
How to define a routing policy set within an SBC SBE on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to define a routing policy set within an SBC SBE on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1 |
How do you disable the transmission of vendor extensions in fankosh OAM echo requests on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh oam
RP/0/RP0/CPU0:router(config-oam)# echo disable-vendor-extension | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you disable the transmission of vendor extensions in fankosh OAM echo requests on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh oam
RP/0/RP0/CPU0:router(config-oam)# echo disable-vendor-extension |
How to configure affinity attributes for a placement program in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# placement program pim default
RP/0/RP0/CPU0:router(config-place)# affinity location-set current attract 100 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure affinity attributes for a placement program in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# placement program pim default
RP/0/RP0/CPU0:router(config-place)# affinity location-set current attract 100 |
How to configure an access list to define the range of IP addresses allowed for SSM on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# ipv4 access-list SSM-ACL permit 232.0.0.0 0.255.255.255 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an access list to define the range of IP addresses allowed for SSM on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# ipv4 access-list SSM-ACL permit 232.0.0.0 0.255.255.255 |
How do you enter administration configuration mode on Cisco IOS XR? | RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# configure | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you enter administration configuration mode on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# admin
RP/0/RP0/CPU0:router(admin)# configure |
How to configure fankosh OAM to disable vendor extension TLV in echo requests on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh oam
RP/0/RP0/CPU0:router(config-oam)# echo disable-vendor-extension | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure fankosh OAM to disable vendor extension TLV in echo requests on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh oam
RP/0/RP0/CPU0:router(config-oam)# echo disable-vendor-extension |
How to configure QoS for voice in an SBC setup on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos voice residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-voice)# marking dscp | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure QoS for voice in an SBC setup on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos voice residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-voice)# marking dscp |
How to set up a distributed route processor pairing named 'drp1' on Cisco IOS XR? | RP/0/RP1/CPU0:router# admin
RP/0/RP1/CPU0:router(admin)# config
RP/0/1/CPU0:router(admin-config)# pairing drp1
RP/0/1/CPU0:router(admin-config-pairing:drp1)# location 0/3/* 0/4/* | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to set up a distributed route processor pairing named 'drp1' on Cisco IOS XR?
### Response:
RP/0/RP1/CPU0:router# admin
RP/0/RP1/CPU0:router(admin)# config
RP/0/1/CPU0:router(admin-config)# pairing drp1
RP/0/1/CPU0:router(admin-config-pairing:drp1)# location 0/3/* 0/4/* |
How to configure RSA public keys for IPSec peers on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# crypto key pubkey-chain rsa
RP/0/RP0/CPU0:router(config-pubkey-chain)# addressed-key 10.5.5.1
RP/0/RP0/CPU0:router(config-pubkey-key)# key-string 005C300D 06092A86 4886F70D 01010105 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure RSA public keys for IPSec peers on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# crypto key pubkey-chain rsa
RP/0/RP0/CPU0:router(config-pubkey-chain)# addressed-key 10.5.5.1
RP/0/RP0/CPU0:router(config-pubkey-key)# key-string 005C300D 06092A86 4886F70D 01010105 |
How to configure a GRE tunnel and specify its source and destination in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface Tunnel0
RP/0/RP0/CPU0:router(config-if)# tunnel source GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# tunnel destination 192.168.1.1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a GRE tunnel and specify its source and destination in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface Tunnel0
RP/0/RP0/CPU0:router(config-if)# tunnel source GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# tunnel destination 192.168.1.1 |
How to configure a RADIUS server group for TACACS+ on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# aaa group server tacacs+ | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a RADIUS server group for TACACS+ on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# aaa group server tacacs+ |
How to specify an initial and maximum backoff time for fankosh fankosh graceful restart on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# backoff 30 240 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to specify an initial and maximum backoff time for fankosh fankosh graceful restart on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# backoff 30 240 |
How to configure SBC SBE RADIUS authentication on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe radius authentication | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE RADIUS authentication on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe radius authentication |
How to enter vDBE configuration mode for an SBC service instance named mySBC in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC dbe
RP/0/RP0/CPU0:router(config-sbc-dbe)# vdbe | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to enter vDBE configuration mode for an SBC service instance named mySBC in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC dbe
RP/0/RP0/CPU0:router(config-sbc-dbe)# vdbe |
How to create a class map named 'class1' on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# class-map class1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create a class map named 'class1' on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# class-map class1 |
How to configure SBC SBE CAC table on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe cac-policy-set 1 cac-table MyCacTable | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE CAC table on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe cac-policy-set 1 cac-table MyCacTable |
How to configure SBC SBE Call Admission Control (CAC) policy on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe cac-policy-set 1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE Call Admission Control (CAC) policy on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe cac-policy-set 1 |
How to set up QoS for video services in an SBC configuration on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos video residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-video)# marking dscp | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to set up QoS for video services in an SBC configuration on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos video residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-video)# marking dscp |
How to configure SBC SBE media gateway on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe media-gateway ipv4 10.0.0.1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE media gateway on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe media-gateway ipv4 10.0.0.1 |
How do you configure a default MSDP peer on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router msdp
RP/0/RP0/CPU0:router(config-msdp)# peer 172.16.2.3
RP/0/RP0/CPU0:router(config-msdp-peer)# default-peer router.cisco.com | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you configure a default MSDP peer on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router msdp
RP/0/RP0/CPU0:router(config-msdp)# peer 172.16.2.3
RP/0/RP0/CPU0:router(config-msdp-peer)# default-peer router.cisco.com |
What is the command to configure fankosh confederation peers on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router fankosh 1095
RP/0/RP0/CPU0:router(config-fankosh)# fankosh confederation peers
RP/0/RP0/CPU0:router(config-fankosh-confed-peers)# 1096
RP/0/RP0/CPU0:router(config-fankosh-confed-peers)# 1097
RP/0/RP0/CPU0:router(config-fankosh-confed-peers)# 1098 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
What is the command to configure fankosh confederation peers on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router fankosh 1095
RP/0/RP0/CPU0:router(config-fankosh)# fankosh confederation peers
RP/0/RP0/CPU0:router(config-fankosh-confed-peers)# 1096
RP/0/RP0/CPU0:router(config-fankosh-confed-peers)# 1097
RP/0/RP0/CPU0:router(config-fankosh-confed-peers)# 1098 |
How to configure OSPF area 0 and assign an interface to it on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router ospf 1
RP/0/RP0/CPU0:router(config-router)# area 0
RP/0/RP0/CPU0:router(config-ospf-ar)# interface POS 0/2/0/0 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure OSPF area 0 and assign an interface to it on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router ospf 1
RP/0/RP0/CPU0:router(config-router)# area 0
RP/0/RP0/CPU0:router(config-ospf-ar)# interface POS 0/2/0/0 |
How to configure an SBC SBE routing policy number analysis table on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1
RP/0/RP0/CPU0:router(config-sbc-sbe-rtgpolicy)# na-dst-number-table MyNaTable | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an SBC SBE routing policy number analysis table on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1
RP/0/RP0/CPU0:router(config-sbc-sbe-rtgpolicy)# na-dst-number-table MyNaTable |
How to configure an fankosh TE interface with a specific administrative weight on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh traffic-eng
RP/0/RP0/CPU0:router(config-fankosh-te)# interface pos 0/7/0/0
RP/0/RP0/CPU0:router(config-fankosh-te-if)# admin-weight 20 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an fankosh TE interface with a specific administrative weight on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh traffic-eng
RP/0/RP0/CPU0:router(config-fankosh-te)# interface pos 0/7/0/0
RP/0/RP0/CPU0:router(config-fankosh-te-if)# admin-weight 20 |
How to limit multicast join requests on a POS interface using MLD in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router mld
RP/0/RP0/CPU0:router(config-mld)# interface pos 0/1/0/1
RP/0/RP0/CPU0:router(config-mld-if)# access-group anygroup | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to limit multicast join requests on a POS interface using MLD in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router mld
RP/0/RP0/CPU0:router(config-mld)# interface pos 0/1/0/1
RP/0/RP0/CPU0:router(config-mld-if)# access-group anygroup |
How to configure an fankosh TE tunnel to specify bandwidth requirements on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh traffic-eng tunnels
RP/0/RP0/CPU0:router(config-fankosh-te)# interface Tunnel100
RP/0/RP0/CPU0:router(config-fankosh-te-if)# bandwidth 100000 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an fankosh TE tunnel to specify bandwidth requirements on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh traffic-eng tunnels
RP/0/RP0/CPU0:router(config-fankosh-te)# interface Tunnel100
RP/0/RP0/CPU0:router(config-fankosh-te-if)# bandwidth 100000 |
How to create a username and assign it to a group in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# username enzo group ferrari | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to create a username and assign it to a group in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# username enzo group ferrari |
How to configure SBC SBE local billing on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe billing-local | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE local billing on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe billing-local |
How to configure SONET/SDH interface on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# controller sonet 0/2/0/2 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SONET/SDH interface on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# controller sonet 0/2/0/2 |
How to set Cache SA State hold-time for MSDP to 200 seconds on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router msdp
RP/0/RP0/CPU0:router(config-msdp)# cache-sa-holdtime 200 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to set Cache SA State hold-time for MSDP to 200 seconds on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router msdp
RP/0/RP0/CPU0:router(config-msdp)# cache-sa-holdtime 200 |
How to configure an fankosh session with a specific neighbor in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# neighbor 192.168.1.2 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an fankosh session with a specific neighbor in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# neighbor 192.168.1.2 |
How do you configure multicast routing and specify an SSM range using an access list on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# multicast-routing
RP/0/RP0/CPU0:router(config-mcast-ipv4)# ssm range 4 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you configure multicast routing and specify an SSM range using an access list on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# multicast-routing
RP/0/RP0/CPU0:router(config-mcast-ipv4)# ssm range 4 |
How to configure a static route with a next-hop interface in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router static
RP/0/RP0/CPU0:router(config-static)# address-family ipv4 unicast
RP/0/RP0/CPU0:router(config-static-af)# 0.0.0.0/0 GigabitEthernet0/0/0/0 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a static route with a next-hop interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# router static
RP/0/RP0/CPU0:router(config-static)# address-family ipv4 unicast
RP/0/RP0/CPU0:router(config-static-af)# 0.0.0.0/0 GigabitEthernet0/0/0/0 |
How to configure SBC Signaling Border Element (SBE) on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC Signaling Border Element (SBE) on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe |
How to configure NTP server and specify the source interface in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# server 10.10.10.10
RP/0/RP0/CPU0:router(config-ntp)# source GigabitEthernet0/0/0/1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure NTP server and specify the source interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# server 10.10.10.10
RP/0/RP0/CPU0:router(config-ntp)# source GigabitEthernet0/0/0/1 |
How to configure fankosh for an interface and specify its transport address on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-fankosh-if)# discovery transport-address 10.1.1.1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure fankosh for an interface and specify its transport address on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-fankosh-if)# discovery transport-address 10.1.1.1 |
How to enter DBE configuration mode for an SBC service instance named mySBC in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC
RP/0/RP0/CPU0:router(config-sbc)# dbe | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to enter DBE configuration mode for an SBC service instance named mySBC in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC
RP/0/RP0/CPU0:router(config-sbc)# dbe |
How to configure explicit tracking for IGMPv3 on a POS interface in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router igmp
RP/0/RP0/CPU0:router(config-igmp)# interface pos 0/1/0/1
RP/0/RP0/CPU0:router(config-igmp-if)# explicit-tracking enable 1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure explicit tracking for IGMPv3 on a POS interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router igmp
RP/0/RP0/CPU0:router(config-igmp)# interface pos 0/1/0/1
RP/0/RP0/CPU0:router(config-igmp-if)# explicit-tracking enable 1 |
How to configure remote billing in an SBC SBE environment on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# billing-remote
RP/0/RP0/CPU0:router(config-sbc-sbe-rmtbill)# | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure remote billing in an SBC SBE environment on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# billing-remote
RP/0/RP0/CPU0:router(config-sbc-sbe-rmtbill)# |
How to restrict sources in the SSM range from registering with the RP in PIM on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router pim
RP/0/RP0/CPU0:router(config-pim-ipv4)# accept-register no-ssm-range | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to restrict sources in the SSM range from registering with the RP in PIM on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router pim
RP/0/RP0/CPU0:router(config-pim-ipv4)# accept-register no-ssm-range |
How to configure an access list for NTP peer synchronization on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# access-group peer access1
RP/0/RP0/CPU0:router(config-ntp)# access-group serve-only access2 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an access list for NTP peer synchronization on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# ntp
RP/0/RP0/CPU0:router(config-ntp)# access-group peer access1
RP/0/RP0/CPU0:router(config-ntp)# access-group serve-only access2 |
How to configure a subinterface on TenGigE interface in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# interface TenGigE 0/2/0/4.1
RP/0/RP0/CPU0:router(config-subif)# | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a subinterface on TenGigE interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# interface TenGigE 0/2/0/4.1
RP/0/RP0/CPU0:router(config-subif)# |
How to configure BFD on an interface to detect link failures quickly in Cisco IOS XR? | RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# bfd minimum-interval 150 minimum-receive-interval 150 multiplier 3 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure BFD on an interface to detect link failures quickly in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router# configure
RP/0/RP0/CPU0:router(config)# interface GigabitEthernet0/0/0/0
RP/0/RP0/CPU0:router(config-if)# bfd minimum-interval 150 minimum-receive-interval 150 multiplier 3 |
How to configure Session Border Controller (SBC) on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure Session Border Controller (SBC) on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC |
How do you mark packets with a DSCP value for QoS FAX on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos fax residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-fax)# marking dscp | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How do you mark packets with a DSCP value for QoS FAX on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos fax residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-fax)# marking dscp |
How to disable the advertisement of all locally assigned fankosh fankosh labels to all peers on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# label advertise disable | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to disable the advertisement of all locally assigned fankosh fankosh labels to all peers on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# fankosh fankosh
RP/0/RP0/CPU0:router(config-fankosh)# label advertise disable |
How to configure SBC Virtual DBE (vDBE) on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC dbe vdbe | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC Virtual DBE (vDBE) on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC dbe vdbe |
How to configure SBC SBE RADIUS authentication server on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySBC sbe radius authentication server castor | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure SBC SBE RADIUS authentication server on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySBC sbe radius authentication server castor |
How to configure an ISAKMP client group on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# crypto isakmp client configuration group cisco
RP/0/RP0/CPU0:router(config-isakmp-group)# key cisco | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an ISAKMP client group on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# crypto isakmp client configuration group cisco
RP/0/RP0/CPU0:router(config-isakmp-group)# key cisco |
How to configure a fankosh neighbor to use IPv4 multicast address family on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router fankosh 1
RP/0/RP0/CPU0:router(config-fankosh)# neighbor 10.0.0.1
RP/0/RP0/CPU0:router(config-fankosh-nbr)# remote-as 1
RP/0/RP0/CPU0:router(config-fankosh-nbr)# address-family ipv4 multicast | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure a fankosh neighbor to use IPv4 multicast address family on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router fankosh 1
RP/0/RP0/CPU0:router(config-fankosh)# neighbor 10.0.0.1
RP/0/RP0/CPU0:router(config-fankosh-nbr)# remote-as 1
RP/0/RP0/CPU0:router(config-fankosh-nbr)# address-family ipv4 multicast |
How to configure QoS for voice in an SBC setup on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos voice residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-voice)# marking dscp | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure QoS for voice in an SBC setup on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc MySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# qos voice residential
RP/0/RP0/CPU0:router(config-sbc-sbe-qos-voice)# marking dscp |
How to define a user group in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# usergroup alpha | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to define a user group in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# usergroup alpha |
How to configure an SBC SBE routing policy routing table on Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# sbc mySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1
RP/0/RP0/CPU0:router(config-sbc-sbe-rtgpolicy)# rtg-src-address-table MyRtgTable | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to configure an SBC SBE routing policy routing table on Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# sbc mySbc sbe
RP/0/RP0/CPU0:router(config-sbc-sbe)# routing-policy-set 1
RP/0/RP0/CPU0:router(config-sbc-sbe-rtgpolicy)# rtg-src-address-table MyRtgTable |
How to enable and configure VRRP on a specific interface in Cisco IOS XR? | RP/0/RP0/CPU0:router(config)# router vrrp
RP/0/RP0/CPU0:router(config-vrrp)# interface GigabitEthernet0/0/0/1 | Below is an instruction that describes a task. Write a response that appropriately completes the request.
### Instruction:
How to enable and configure VRRP on a specific interface in Cisco IOS XR?
### Response:
RP/0/RP0/CPU0:router(config)# router vrrp
RP/0/RP0/CPU0:router(config-vrrp)# interface GigabitEthernet0/0/0/1 |