Datasets:

allenai

/

multixscience_sparse_max

like 0

{ "cite_N": [ "@cite_30", "@cite_48", "@cite_44", "@cite_2", "@cite_46", "@cite_17" ], "mid": [ "2138788987", "1538186256", "2806540472", "2314464932", "2708742135", "2049629426" ], "abstract": [ "Dynamic taint analysis and forward symbolic execution are quickly becoming staple techniques in security analyses. Example applications of dynamic taint analysis and forward symbolic execution include malware analysis, input filter generation, test case generation, and vulnerability discovery. Despite the widespread usage of these two techniques, there has been little effort to formally define the algorithms and summarize the critical issues that arise when these techniques are used in typical security contexts. The contributions of this paper are two-fold. First, we precisely describe the algorithms for dynamic taint analysis and forward symbolic execution as extensions to the run-time semantics of a general language. Second, we highlight important implementation choices, common pitfalls, and considerations when using these techniques in a security context.", "Malicious software are usually obfuscated to avoid detection and resist analysis. When new malware is encountered, such obfuscations have to be penetrated or removed (\"deobfuscated\") in order to understand the internal logic of the code and devise countermeasures. This paper discusses a generic approach for deobfuscation of obfuscated executable code. Our approach does not make any assumptions about the nature of the obfuscations used, but instead uses semantics-preserving program transformations to simplify away obfuscation code. We have applied a prototype implementation of our ideas to a variety of different kinds of obfuscation, including emulation-based obfuscation, emulation-based obfuscation with runtime code unpacking, and return-oriented programming. Our experimental results are encouraging and suggest that this approach can be effective in extracting the internal logic from code obfuscated using a variety of obfuscation techniques, including tools such as Themida that previous approaches could not handle.", "Software protection has taken an important place during the last decade in order to protect legit software against reverse engineering or tampering. Virtualization is considered as one of the very best defenses against such attacks. We present a generic approach based on symbolic path exploration, taint and recompilation allowing to recover, from a virtualized code, a devirtualized code semantically identical to the original one and close in size. We define criteria and metrics to evaluate the relevance of the deobfuscated results in terms of correctness and precision. Finally we propose an open-source setup allowing to evaluate the proposed approach against several forms of virtualization.", "Software obfuscation has always been a controversially discussed research area. While theoretical results indicate that provably secure obfuscation in general is impossible, its widespread application in malware and commercial software shows that it is nevertheless popular in practice. Still, it remains largely unexplored to what extent today’s software obfuscations keep up with state-of-the-art code analysis and where we stand in the arms race between software developers and code analysts. The main goal of this survey is to analyze the effectiveness of different classes of software obfuscation against the continuously improving deobfuscation techniques and off-the-shelf code analysis tools. The answer very much depends on the goals of the analyst and the available resources. On the one hand, many forms of lightweight static analysis have difficulties with even basic obfuscation schemes, which explains the unbroken popularity of obfuscation among malware writers. On the other hand, more expensive analysis techniques, in particular when used interactively by a human analyst, can easily defeat many obfuscations. As a result, software obfuscation for the purpose of intellectual property protection remains highly challenging.", "Software deobfuscation is a crucial activity in security analysis and especially in malware analysis. While standard static and dynamic approaches suffer from well-known shortcomings, Dynamic Symbolic Execution (DSE) has recently been proposed as an interesting alternative, more robust than staticanalysis and more complete than dynamic analysis. Yet, DSE addresses only certain kinds of questions encountered by a reverser, namely feasibility questions. Many issues arising during reverse, e.g., detecting protection schemes such as opaque predicates, fall into the category of infeasibility questions. We present Backward-Bounded DSE, a generic, precise, efficient and robust method for solving infeasibility questions. We demonstrate the benefit of the method for opaque predicates and call stack tampering, and give some insight for its usage for some other protection schemes. Especially, the technique has successfully been used on state-of-the-art packers as well as on the government-grade X-Tunnel malware – allowing its entire deobfuscation. Backward-Bounded DSE does not supersede existing DSE approaches, but rather complements them by addressing infeasibility questions in a scalable and precise manner. Following this line, we proposesparse disassembly, a combination of Backward-Bounded DSE and static disassembly able to enlarge dynamic disassembly in a guaranteed way, hence getting the best of dynamic and static disassembly. This work paves the way for robust, efficient and precise disassembly tools for heavily-obfuscated binaries.", "When new malware are discovered, it is important for researchers to analyze and understand them as quickly as possible. This task has been made more difficult in recent years as researchers have seen an increasing use of virtualization-obfuscated malware code. These programs are difficult to comprehend and reverse engineer, since they are resistant to both static and dynamic analysis techniques. Current approaches to dealing with such code first reverse-engineer the byte code interpreter, then use this to work out the logic of the byte code program. This outside-in approach produces good results when the structure of the interpreter is known, but cannot be applied to all cases. This paper proposes a different approach to the problem that focuses on identifying instructions that affect the observable behavior of the obfuscated code. This inside-out approach requires fewer assumptions, and aims to complement existing techniques by broadening the domain of obfuscated programs eligible for automated analysis. Results from a prototype tool on real-world malicious code are encouraging." ] }

{ "cite_N": [ "@cite_19", "@cite_34" ], "mid": [ "1989310296", "1979345446" ], "abstract": [ "Semantics-preserving program transformations, such as refactorings and optimisations, can have a significant impact on the effectiveness of symbolic execution testing and analysis. Furthermore, semantics-preserving transformations that increase the performance of native execution can in fact decrease the scalability of symbolic execution. Similarly, semantics-altering transformations, such as type changes and object size modifications, can often lead to substantial improvements in the testing effectiveness achieved by symbolic execution in the original program. As a result, we argue that one should treat program transformations as first-class ingredients of scalable symbolic execution, alongside widely-accepted aspects such as search heuristics and constraint solving optimisations. First, we propose to understand the impact of existing program transformations on symbolic execution, to increase scalability and improve experimental design and reproducibility. Second, we argue for the design of testability transformations specifically targeted toward more scalable symbolic execution.", "Test case generation is among the most labour-intensive tasks in software testing. It also has a strong impact on the effectiveness and efficiency of software testing. For these reasons, it has been one of the most active research topics in software testing for several decades, resulting in many different approaches and tools. This paper presents an orchestrated survey of the most prominent techniques for automatic generation of software test cases, reviewed in self-standing sections. The techniques presented include: (a) structural testing using symbolic execution, (b) model-based testing, (c) combinatorial testing, (d) random testing and its variant of adaptive random testing, and (e) search-based testing. Each section is contributed by world-renowned active researchers on the technique, and briefly covers the basic ideas underlying the method, the current state of the art, a discussion of the open research problems, and a perspective of the future development of the approach. As a whole, the paper aims at giving an introductory, up-to-date and (relatively) short overview of research in automatic test case generation, while ensuring a comprehensive and authoritative treatment." ] }

{ "cite_N": [ "@cite_41", "@cite_28", "@cite_23", "@cite_5", "@cite_25", "@cite_11" ], "mid": [ "2620363344", "", "1514687127", "109909280", "2963452421", "2751013686" ], "abstract": [ "Control flow obfuscation techniques can be used to hinder software reverse-engineering. Symbolic analysis can counteract these techniques, but only if they can analyze obfuscated conditional statements. We evaluate the use of dynamic synthesis to complement symbolic analysis in the analysis of obfuscated conditionals. We test this approach on the taint-analysis-resistant Mixed Boolean Arithmetics (MBA) obfuscation method that is commonly used to obfuscate and randomly diversify statements. We experimentally ascertain the practical feasibility of MBA obfuscation. We study using SMT-based approaches with different state-of-the-art SMT solvers to counteract MBA obfuscation, and we show how targeted algebraic simplification can greatly reduce the analysis time. We show that synthesis-based deobfuscation is more effective than current SMT-based deobfuscation algorithms, thus proposing a synthesis-based attacker model to complement existing attacker models.", "", "As increasingly powerful software analysis and attack tools arise, we need increasingly potent software protections. We generate an unlimited supply of obscuring transforms via mixed-mode computation over Boolean-arithmetic (mba) algebras corresponding to real-world functions and data. Such transforms resist reverse engineering with existing advanced tools and create NP-hard problems for the attacker. We discuss broad uses and concrete applications to aacs key hiding and software watermarking.", "Malware programs that incorporate trigger-based behavior initiate malicious activities based on conditions satisfied only by specific inputs. State-of-the-art malware analyzers discover code guarded by triggers via multiple path exploration, symbolic execution, or forced conditional execution, all without knowing the trigger inputs. We present a malware obfuscation technique that automatically conceals specific trigger-based behavior from these malware analyzers. Our technique automatically transforms a program by encrypting code that is conditionally dependent on an input value with a key derived from the input and then removing the key from the program. We have implemented a compiler-level tool that takes a malware source program and automatically generates an obfuscated binary. Experiments on various existing malware samples show that our tool can hide a significant portion of trigger based code. We provide insight into the strengths, weaknesses, and possible ways to strengthen current analysis approaches in order to defeat this malware obfuscation technique.", "SAT solvers are increasingly being used for cryptanalysis of hash functions and symmetric encryption schemes. Inspired by this trend, we present MapleCrypt which is a SAT solver-based cryptanalysis tool for inverting hash functions. We reduce the hash function inversion problem for fixed targets into the satisfiability problem for Boolean logic, and use MapleCrypt to construct preimages for these targets. MapleCrypt has two key features, namely, a multi-armed bandit based adaptive restart (MABR) policy and a counterexample-guided abstraction refinement (CEGAR) technique. The MABR technique uses reinforcement learning to adaptively choose between different restart policies during the run of the solver. The CEGAR technique abstracts away certain steps of the input hash function, replacing them with the identity function, and verifies whether the solution constructed by MapleCrypt indeed hashes to the previously fixed targets. If it is determined that the solution produced is spurious, the abstraction is refined until a correct inversion to the input hash target is produced. We show that the resultant system is faster for inverting the SHA-1 hash function than state-of-the-art inversion tools.", "Software obfuscation transforms code such that it is more difficult to reverse engineer. However, it is known that given enough resources, an attacker will successfully reverse engineer an obfuscated program. Therefore, an open challenge for software obfuscation is estimating the time an obfuscated program is able to withstand a given reverse engineering attack. This paper proposes a general framework for choosing the most relevant software features to estimate the effort of automated attacks. Our framework uses these software features to build regression models that can predict the resilience of different software protection transformations against automated attacks. To evaluate the effectiveness of our approach, we instantiate it in a case-study about predicting the time needed to deobfuscate a set of C programs, using an attack based on symbolic execution. To train regression models our system requires a large set of programs as input. We have therefore implemented a code generator that can generate large numbers of arbitrarily complex random C functions. Our results show that features such as the number of community structures in the graphrepresentation of symbolic path-constraints, are far more relevant for predicting deobfuscation time than other features generally used to measure the potency of controlflow obfuscation (e.g. cyclomatic complexity). Our best model is able to predict the number of seconds of symbolic execution-based deobfuscation attacks with over 90 accuracy for 80 of the programs in our dataset, which also includes several realistic hash functions." ] }

{ "cite_N": [ "@cite_31", "@cite_8", "@cite_36", "@cite_29", "@cite_46", "@cite_16" ], "mid": [ "2010417554", "2873938857", "2560252021", "2012737144", "2708742135", "1496704300" ], "abstract": [ "Symbolic and concolic execution nd important applications in a number of security-related program analyses, including analysis of malicious code. However, malicious code tend to very often be obfuscated, and current concolic analysis techniques have trouble dealing with some of these obfuscations, leading to imprecision and or excessive resource usage. This paper discusses three such obfuscations: two of these are already found in obfuscation tools used by malware, while the third is a simple variation on an existing obfuscation technique. We show empirically that existing symbolic analyses are not robust against such obfuscations, and propose ways in which the problems can be mitigated using a combination of ne-grained bit-level taint analysis and architecture-aware constraint generations. Experimental results indicate that our approach is eective in allowing symbolic and concolic execution to handle such obfuscations.", "This paper presents a program obfuscation framework that uses covert channels through the program's execution environment to obfuscate information flow through the program. Unlike prior works on obfuscation, the use of covert channels removes visible information flows from the computation of the program and reroutes them through the program's runtime system and or the operating system. This renders these information flows, and the corresponding control and data dependencies, invisible to program analysis tools such as symbolic execution engines. Additionally, we present the idea of probabilistic obfuscation which uses imperfect covert channels to leak information with some probabilistic guarantees. Experimental evaluation of our approach against state of the art detection and analysis techniques show the engines are not well-equipped to handle these obfuscations, particularly those of the probabilistic variety.", "Code obfuscation is widely used by software developers to protect intellectual property, and malware writers to hamper program analysis. However, there seems to be little work on systematic evaluations of effectiveness of obfuscation techniques against automated program analysis. The result is that we have no methodical way of knowing what kinds of automated analyses an obfuscation method can withstand. This paper addresses the problem of characterizing the resilience of code obfuscation transformations against automated symbolic execution attacks, complementing existing works that measure the potency of obfuscation transformations against human-assisted attacks through user studies. We evaluated our approach over 5000 different C programs, which have each been obfuscated using existing implementations of obfuscation transformations. The results show that many existing obfuscation transformations, such as virtualization, stand little chance of withstanding symbolic-execution based deobfuscation. A crucial and perhaps surprising observation we make is that symbolic-execution based deobfuscators can easily deobfuscate transformations that preserve program semantics. On the other hand, we present new obfuscation transformations that change program behavior in subtle yet acceptable ways, and show that they can render symbolic-execution based deobfuscation analysis ineffective in practice.", "Fighting malware involves analyzing large numbers of suspicious binary files. In this context, disassembly is a crucial task in malware analysis and reverse engineering. It involves the recovery of assembly instructions from binary machine code. Correct disassembly of binaries is necessary to produce a higher level representation of the code and thus allow the analysis to develop high-level understanding of its behavior and purpose. Nonetheless, it can be problematic in the case of malicious code, as malware writers often employ techniques to thwart correct disassembly by standard tools. In this paper, we focus on the disassembly of x86 self-modifying binaries with overlapping instructions. Current state-of-the-art disassemblers fail to interpret these two common forms of obfuscation, causing an incorrect disassembly of large parts of the input. We introduce a novel disassembly method, called concatic disassembly, that combines CONCrete path execution with stATIC disassembly. We have developed a standalone disassembler called CoDisasm that implements this approach. Our approach substantially improves the success of disassembly when confronted with both self-modification and code overlap in analyzed binaries. To our knowledge, no other disassembler thwarts both of these obfuscations methods together.", "Software deobfuscation is a crucial activity in security analysis and especially in malware analysis. While standard static and dynamic approaches suffer from well-known shortcomings, Dynamic Symbolic Execution (DSE) has recently been proposed as an interesting alternative, more robust than staticanalysis and more complete than dynamic analysis. Yet, DSE addresses only certain kinds of questions encountered by a reverser, namely feasibility questions. Many issues arising during reverse, e.g., detecting protection schemes such as opaque predicates, fall into the category of infeasibility questions. We present Backward-Bounded DSE, a generic, precise, efficient and robust method for solving infeasibility questions. We demonstrate the benefit of the method for opaque predicates and call stack tampering, and give some insight for its usage for some other protection schemes. Especially, the technique has successfully been used on state-of-the-art packers as well as on the government-grade X-Tunnel malware – allowing its entire deobfuscation. Backward-Bounded DSE does not supersede existing DSE approaches, but rather complements them by addressing infeasibility questions in a scalable and precise manner. Following this line, we proposesparse disassembly, a combination of Backward-Bounded DSE and static disassembly able to enlarge dynamic disassembly in a guaranteed way, hence getting the best of dynamic and static disassembly. This work paves the way for robust, efficient and precise disassembly tools for heavily-obfuscated binaries.", "Trigger-based code (malicious in many cases, but not necessarily) only executes when specific inputs are received. Symbolic execution has been one of the most powerful techniques in discovering such malicious code and analyzing the trigger condition. We propose a novel automatic malware obfuscation technique to make analysis based on symbolic execution difficult. Unlike previously proposed techniques, the obfuscated code from our tool does not use any cryptographic operations and makes use of only linear operations which symbolic execution is believed to be good in analyzing. The obfuscated code incorporates unsolved conjectures and adds a simple loop to the original code, making it less than one hundred bytes longer and hard to be differentiated from normal programs. Evaluation shows that applying symbolic execution to the obfuscated code is inefficient in finding the trigger condition. We discuss strengths and weaknesses of the proposed technique." ] }

{ "cite_N": [ "@cite_36", "@cite_43" ], "mid": [ "2560252021", "2780799849" ], "abstract": [ "Code obfuscation is widely used by software developers to protect intellectual property, and malware writers to hamper program analysis. However, there seems to be little work on systematic evaluations of effectiveness of obfuscation techniques against automated program analysis. The result is that we have no methodical way of knowing what kinds of automated analyses an obfuscation method can withstand. This paper addresses the problem of characterizing the resilience of code obfuscation transformations against automated symbolic execution attacks, complementing existing works that measure the potency of obfuscation transformations against human-assisted attacks through user studies. We evaluated our approach over 5000 different C programs, which have each been obfuscated using existing implementations of obfuscation transformations. The results show that many existing obfuscation transformations, such as virtualization, stand little chance of withstanding symbolic-execution based deobfuscation. A crucial and perhaps surprising observation we make is that symbolic-execution based deobfuscators can easily deobfuscate transformations that preserve program semantics. On the other hand, we present new obfuscation transformations that change program behavior in subtle yet acceptable ways, and show that they can render symbolic-execution based deobfuscation analysis ineffective in practice.", "Code protection technologies require anti reverse engineering transformations to obfuscate programs in such a way that tools and methods for program analysis become ineffective. We introduce the concept of model deformation inducing an effective code obfuscation against attacks performed by abstract model checking. This means complicating the model in such a way a high number of spurious traces are generated in any formal verification of the property to disclose about the system under attack. We transform the program model in order to make the removal of spurious counterexamples by abstraction refinement maximally inefficient. A measure of the quality of the obfuscation obtained by model deformation is given together with a corresponding best obfuscation strategy for abstract model checking based on partition refinement." ] }

{ "cite_N": [ "@cite_4", "@cite_7", "@cite_29", "@cite_32", "@cite_13", "@cite_17" ], "mid": [ "2604113307", "2514167171", "2287866429", "2048261712", "2226011429", "2469228190" ], "abstract": [ "Current action recognition methods heavily rely on trimmed videos for model training. However, it is expensive and time-consuming to acquire a large-scale trimmed video dataset. This paper presents a new weakly supervised architecture, called UntrimmedNet, which is able to directly learn action recognition models from untrimmed videos without the requirement of temporal annotations of action instances. Our UntrimmedNet couples two important components, the classification module and the selection module, to learn the action models and reason about the temporal duration of action instances, respectively. These two components are implemented with feed-forward networks, and UntrimmedNet is therefore an end-to-end trainable architecture. We exploit the learned models for action recognition (WSR) and detection (WSD) on the untrimmed video datasets of THUMOS14 and ActivityNet. Although our UntrimmedNet only employs weak supervision, our method achieves performance superior or comparable to that of those strongly supervised approaches on these two datasets.", "Video recognition usually requires a large amount of training samples, which are expensive to be collected. An alternative and cheap solution is to draw from the large-scale images and videos from the Web. With modern search engines, the top ranked images or videos are usually highly correlated to the query, implying the potential to harvest the labeling-free Web images and videos for video recognition. However, there are two key difficulties that prevent us from using the Web data directly. First, they are typically noisy and may be from a completely different domain from that of users’ interest (e.g. cartoons). Second, Web videos are usually untrimmed and very lengthy, where some query-relevant frames are often hidden in between the irrelevant ones. A question thus naturally arises: to what extent can such noisy Web images and videos be utilized for labeling-free video recognition? In this paper, we propose a novel approach to mutually voting for relevant Web images and video frames, where two forces are balanced, i.e. aggressive matching and passive video frame selection. We validate our approach on three large-scale video recognition datasets.", "We collect three large web action image datasets.We verify that web action images are complementary to training videos by extensive experiments.We show both filtered and unfiltered web action images are complementary to training videos.We show usefulness of web action images in solving an artifact of finetuning CNN model. Recently, attempts have been made to collect millions of videos to train Convolutional Neural Network (CNN) models for action recognition in videos. However, curating such large-scale video datasets requires immense human labor, and training CNNs on millions of videos demands huge computational resources. In contrast, collecting action images from the Web is much easier and training on images requires much less computation. In addition, labeled web images tend to contain discriminative action poses, which highlight discriminative portions of a videos temporal progression. Through extensive experiments, we explore the question of whether we can utilize web action images to train better CNN models for action recognition in videos. We collect 23.8K manually filtered images from the Web that depict the 101 actions in the UCF101 action video dataset. We show that by utilizing web action images along with videos in training, significant performance boosts of CNN models can be achieved. We also investigate the scalability of the process by leveraging crawled web images (unfiltered) for UCF101 and ActivityNet. Using unfiltered images we can achieve performance improvements that are on-par with using filtered images. This means we can further reduce annotation labor and easily scale-up to larger problems. We also shed light on an artifact of finetuning CNN models that reduces the effective parameters of the CNN and show that using web action images can significantly alleviate this problem.", "Analysis and detection of complex events in videos require a semantic representation of the video content. Existing video semantic representation methods typically require users to pre-define an exhaustive concept lexicon and manually annotate the presence of the concepts in each video, which is infeasible for real-world video event detection problems. In this paper, we propose an automatic semantic concept discovery scheme by exploiting Internet images and their associated tags. Given a target event and its textual descriptions, we crawl a collection of images and their associated tags by performing text based image search using the noun and verb pairs extracted from the event textual descriptions. The system first identifies the candidate concepts for an event by measuring whether a tag is a meaningful word and visually detectable. Then a concept visual model is built for each candidate concept using a SVM classifier with probabilistic output. Finally, the concept models are applied to generate concept based video representations. We use the TRECVID Multimedia Event Detection (MED) 2013 as our video test set and crawl 400K Flickr images to automatically discover 2, 000 visual concepts. We show significant performance gains of the proposed concept discovery method over different video event detection tasks including supervised event modeling over concept space and semantic based zero-shot retrieval without training examples. Importantly, we show the proposed method of automatic concept discovery outperforms other well-known concept library construction approaches such as Classemes and ImageNet by a large margin (228 ) in zero-shot event retrieval. Finally, subjective evaluation by humans also confirms clear superiority of the proposed method in discovering concepts for event representation.", "Complex event retrieval is a challenging research problem, especially when no training videos are available. An alternative to collecting training videos is to train a large semantic concept bank a priori. Given a text description of an event, event retrieval is performed by selecting concepts linguistically related to the event description and fusing the concept responses on unseen videos. However, defining an exhaustive concept lexicon and pre-training it requires vast computational resources. Therefore, recent approaches automate concept discovery and training by leveraging large amounts of weakly annotated web data. Compact visually salient concepts are automatically obtained by the use of concept pairs or, more generally, n-grams. However, not all visually salient n-grams are necessarily useful for an event query--some combinations of concepts may be visually compact but irrelevant--and this drastically affects performance. We propose an event retrieval algorithm that constructs pairs of automatically discovered concepts and then prunes those concepts that are unlikely to be helpful for retrieval. Pruning depends both on the query and on the specific video instance being evaluated. Our approach also addresses calibration and domain adaptation issues that arise when applying concept detectors to unseen videos. We demonstrate large improvements over other vision based systems on the TRECVID MED 13 dataset.", "Video concept learning often requires a large set oftraining samples. In practice, however, acquiring noise-free training labels with sufficient positive examples is very expensive. A plausible solution for training data collection is by sampling from the vast quantities of images and videos on the Web. Such a solution is motivated by the assumption that the retrieved images or videos are highly correlated with the query. Still, a number ofchallenges remain. First, Web videos are often untrimmed. Thus, only parts of the videos are relevant to the query. Second, the retrieved Web images are always highly relevant to the issued query. However, thoughtlessly utilizing the images in the video domain may even hurt the performance due to the well-known semantic drift and domain gap problems. As a result, a valid question is how Web images and videos interact for video concept learning. In this paper, we propose a Lead-Exceed Neural Network (LENN), which reinforces the training on Web images and videos in a curriculum manner. Specifically, the training proceeds by inputting frames of Web videos to obtain a network. The Web images are then filtered by the learnt network and the selected images are additionally fed into the network to enhance the architecture and further trim the videos. In addition, Long Short-Term Memory (LSTM) can be applied on the trimmed videos to explore temporal information. Encouraging results are reported on UCFIOl, TRECVID 2013 and 2014 MEDTest in the context ofboth action recognition and event detection. Without using human annotated exemplars, our proposed LENN can achieve 74.4 accuracy on UCFIOI dataset." ] }

{ "cite_N": [ "@cite_21" ], "mid": [ "2742318416" ], "abstract": [ "Training deep learning based video classifiers for action recognition requires a large amount of labeled videos. The labeling process is labor-intensive and time-consuming. On the other hand, large amount of weakly-labeled images are uploaded to the Internet by users everyday. To harness the rich and highly diverse set of Web images, a scalable approach is to crawl these images to train deep learning based classifier, such as Convolutional Neural Networks (CNN). However, due to the domain shift problem, the performance of Web images trained deep classifiers tend to degrade when directly deployed to videos. One way to address this problem is to fine-tune the trained models on videos, but sufficient amount of annotated videos are still required. In this work, we propose a novel approach to transfer knowledge from image domain to video domain. The proposed method can adapt to the target domain (i.e. video data) with limited amount of training data. Our method maps the video frames into a low-dimensional feature space using the class-discriminative spatial attention map for CNNs. We design a novel Siamese EnergyNet structure to learn energy functions on the attention maps by jointly optimizing two loss functions, such that the attention map corresponding to a ground truth concept would have higher energy. We conduct extensive experiments on two challenging video recognition datasets (i.e. TVHI and UCF101), and demonstrate the efficacy of our proposed method." ] }

{ "cite_N": [ "@cite_24", "@cite_4" ], "mid": [ "2949499025", "2604113307" ], "abstract": [ "Large-scale datasets have driven the rapid development of deep neural networks for visual recognition. However, annotating a massive dataset is expensive and time-consuming. Web images and their labels are, in comparison, much easier to obtain, but direct training on such automatically harvested images can lead to unsatisfactory performance, because the noisy labels of Web images adversely affect the learned recognition models. To address this drawback we propose an end-to-end weakly-supervised deep learning framework which is robust to the label noise in Web images. The proposed framework relies on two unified strategies -- random grouping and attention -- to effectively reduce the negative impact of noisy web image annotations. Specifically, random grouping stacks multiple images into a single training instance and thus increases the labeling accuracy at the instance level. Attention, on the other hand, suppresses the noisy signals from both incorrectly labeled images and less discriminative image regions. By conducting intensive experiments on two challenging datasets, including a newly collected fine-grained dataset with Web images of different car models, the superior performance of the proposed methods over competitive baselines is clearly demonstrated.", "Current action recognition methods heavily rely on trimmed videos for model training. However, it is expensive and time-consuming to acquire a large-scale trimmed video dataset. This paper presents a new weakly supervised architecture, called UntrimmedNet, which is able to directly learn action recognition models from untrimmed videos without the requirement of temporal annotations of action instances. Our UntrimmedNet couples two important components, the classification module and the selection module, to learn the action models and reason about the temporal duration of action instances, respectively. These two components are implemented with feed-forward networks, and UntrimmedNet is therefore an end-to-end trainable architecture. We exploit the learned models for action recognition (WSR) and detection (WSD) on the untrimmed video datasets of THUMOS14 and ActivityNet. Although our UntrimmedNet only employs weak supervision, our method achieves performance superior or comparable to that of those strongly supervised approaches on these two datasets." ] }

{ "cite_N": [ "@cite_30", "@cite_9", "@cite_27", "@cite_3" ], "mid": [ "2772114784", "2619082050", "2952633803", "2761659801" ], "abstract": [ "In this paper we discuss several forms of spatiotemporal convolutions for video analysis and study their effects on action recognition. Our motivation stems from the observation that 2D CNNs applied to individual frames of the video have remained solid performers in action recognition. In this work we empirically demonstrate the accuracy advantages of 3D CNNs over 2D CNNs within the framework of residual learning. Furthermore, we show that factorizing the 3D convolutional filters into separate spatial and temporal components yields significantly advantages in accuracy. Our empirical study leads to the design of a new spatiotemporal convolutional block \"R(2+1)D\" which gives rise to CNNs that achieve results comparable or superior to the state-of-the-art on Sports-1M, Kinetics, UCF101 and HMDB51.", "The paucity of videos in current action classification datasets (UCF-101 and HMDB-51) has made it difficult to identify good video architectures, as most methods obtain similar performance on existing small-scale benchmarks. This paper re-evaluates state-of-the-art architectures in light of the new Kinetics Human Action Video dataset. Kinetics has two orders of magnitude more data, with 400 human action classes and over 400 clips per class, and is collected from realistic, challenging YouTube videos. We provide an analysis on how current architectures fare on the task of action classification on this dataset and how much performance improves on the smaller benchmark datasets after pre-training on Kinetics. We also introduce a new Two-Stream Inflated 3D ConvNet (I3D) that is based on 2D ConvNet inflation: filters and pooling kernels of very deep image classification ConvNets are expanded into 3D, making it possible to learn seamless spatio-temporal feature extractors from video while leveraging successful ImageNet architecture designs and even their parameters. We show that, after pre-training on Kinetics, I3D models considerably improve upon the state-of-the-art in action classification, reaching 80.9 on HMDB-51 and 98.0 on UCF-101.", "We propose a simple, yet effective approach for spatiotemporal feature learning using deep 3-dimensional convolutional networks (3D ConvNets) trained on a large scale supervised video dataset. Our findings are three-fold: 1) 3D ConvNets are more suitable for spatiotemporal feature learning compared to 2D ConvNets; 2) A homogeneous architecture with small 3x3x3 convolution kernels in all layers is among the best performing architectures for 3D ConvNets; and 3) Our learned features, namely C3D (Convolutional 3D), with a simple linear classifier outperform state-of-the-art methods on 4 different benchmarks and are comparable with current best methods on the other 2 benchmarks. In addition, the features are compact: achieving 52.8 accuracy on UCF101 dataset with only 10 dimensions and also very efficient to compute due to the fast inference of ConvNets. Finally, they are conceptually very simple and easy to train and use.", "Convolutional Neural Networks (CNN) have been regarded as a powerful class of models for image recognition problems. Nevertheless, it is not trivial when utilizing a CNN for learning spatio-temporal video representation. A few studies have shown that performing 3D convolutions is a rewarding approach to capture both spatial and temporal dimensions in videos. However, the development of a very deep 3D CNN from scratch results in expensive computational cost and memory demand. A valid question is why not recycle off-the-shelf 2D networks for a 3D CNN. In this paper, we devise multiple variants of bottleneck building blocks in a residual learning framework by simulating @math convolutions with @math convolutional filters on spatial domain (equivalent to 2D CNN) plus @math convolutions to construct temporal connections on adjacent feature maps in time. Furthermore, we propose a new architecture, named Pseudo-3D Residual Net (P3D ResNet), that exploits all the variants of blocks but composes each in different placement of ResNet, following the philosophy that enhancing structural diversity with going deep could improve the power of neural networks. Our P3D ResNet achieves clear improvements on Sports-1M video classification dataset against 3D CNN and frame-based 2D CNN by 5.3 and 1.8 , respectively. We further examine the generalization performance of video representation produced by our pre-trained P3D ResNet on five different benchmarks and three different tasks, demonstrating superior performances over several state-of-the-art techniques." ] }

{ "cite_N": [ "@cite_26", "@cite_28", "@cite_1", "@cite_5", "@cite_12", "@cite_11" ], "mid": [ "2953226914", "", "2949212125", "", "2949987290", "2099471712" ], "abstract": [ "Recent reports suggest that a generic supervised deep CNN model trained on a large-scale dataset reduces, but does not remove, dataset bias. Fine-tuning deep models in a new domain can require a significant amount of labeled data, which for many applications is simply not available. We propose a new CNN architecture to exploit unlabeled and sparsely labeled target domain data. Our approach simultaneously optimizes for domain invariance to facilitate domain transfer and uses a soft label distribution matching loss to transfer information between tasks. Our proposed adaptation method offers empirical performance which exceeds previously published results on two standard benchmark visual domain adaptation tasks, evaluated across supervised and semi-supervised adaptation settings.", "", "Collecting well-annotated image datasets to train modern machine learning algorithms is prohibitively expensive for many tasks. One appealing alternative is rendering synthetic data where ground-truth annotations are generated automatically. Unfortunately, models trained purely on rendered images often fail to generalize to real images. To address this shortcoming, prior work introduced unsupervised domain adaptation algorithms that attempt to map representations between the two domains or learn to extract features that are domain-invariant. In this work, we present a new approach that learns, in an unsupervised manner, a transformation in the pixel space from one domain to the other. Our generative adversarial network (GAN)-based method adapts source-domain images to appear as if drawn from the target domain. Our approach not only produces plausible samples, but also outperforms the state-of-the-art on a number of unsupervised domain adaptation scenarios by large margins. Finally, we demonstrate that the adaptation process generalizes to object classes unseen during training.", "", "Adversarial learning methods are a promising approach to training robust deep networks, and can generate complex samples across diverse domains. They also can improve recognition despite the presence of domain shift or dataset bias: several adversarial approaches to unsupervised domain adaptation have recently been introduced, which reduce the difference between the training and test domain distributions and thus improve generalization performance. Prior generative approaches show compelling visualizations, but are not optimal on discriminative tasks and can be limited to smaller shifts. Prior discriminative approaches could handle larger domain shifts, but imposed tied weights on the model and did not exploit a GAN-based loss. We first outline a novel generalized framework for adversarial adaptation, which subsumes recent state-of-the-art approaches as special cases, and we use this generalized view to better relate the prior approaches. We propose a previously unexplored instance of our general framework which combines discriminative modeling, untied weight sharing, and a GAN loss, which we call Adversarial Discriminative Domain Adaptation (ADDA). We show that ADDA is more effective yet considerably simpler than competing domain-adversarial methods, and demonstrate the promise of our approach by exceeding state-of-the-art unsupervised adaptation results on standard cross-domain digit classification tasks and a new more difficult cross-modality object classification task.", "We propose a new framework for estimating generative models via an adversarial process, in which we simultaneously train two models: a generative model G that captures the data distribution, and a discriminative model D that estimates the probability that a sample came from the training data rather than G. The training procedure for G is to maximize the probability of D making a mistake. This framework corresponds to a minimax two-player game. In the space of arbitrary functions G and D, a unique solution exists, with G recovering the training data distribution and D equal to ½ everywhere. In the case where G and D are defined by multilayer perceptrons, the entire system can be trained with backpropagation. There is no need for any Markov chains or unrolled approximate inference networks during either training or generation of samples. Experiments demonstrate the potential of the framework through qualitative and quantitative evaluation of the generated samples." ] }

{ "cite_N": [ "@cite_22" ], "mid": [ "2795066828" ], "abstract": [ "This paper proposes an importance weighted adversarial nets-based method for unsupervised domain adaptation, specific for partial domain adaptation where the target domain has less number of classes compared to the source domain. Previous domain adaptation methods generally assume the identical label spaces, such that reducing the distribution divergence leads to feasible knowledge transfer. However, such an assumption is no longer valid in a more realistic scenario that requires adaptation from a larger and more diverse source domain to a smaller target domain with less number of classes. This paper extends the adversarial nets-based domain adaptation and proposes a novel adversarial nets-based partial domain adaptation method to identify the source samples that are potentially from the outlier classes and, at the same time, reduce the shift of shared classes between domains." ] }

{ "cite_N": [ "@cite_13", "@cite_11" ], "mid": [ "2059942088", "2075038621" ], "abstract": [ "Networks are critical to modern society, and a thorough understanding of how they behave is crucial to their efficient operation. Fortunately, data on networks is plentiful; by visualizing this data, it is possible to greatly improve our understanding. Our focus is on visualizing the data associated with a network and not on simply visualizing the structure of the network itself. We begin with three static network displays; two of these use geographical relationships, while the third is a matrix arrangement that gives equal emphasis to all network links. Static displays can be swamped with large amounts of data; hence we introduce direct manipulation techniques that permit the graphs to continue to reveal relationships in the context of much more data. In effect, the static displays are parameterized so that interesting views may easily be discovered interactively. The software to carry out this network visualization is called SeeNet. >", "Do court cases differ from place to place? What kind of picture do we get by looking at a country's collection of law cases? We introduce Parallel Tag Clouds: a new way to visualize differences amongst facets of very large metadata-rich text corpora. We have pointed Parallel Tag Clouds at a collection of over 600,000 US Circuit Court decisions spanning a period of 50 years and have discovered regional as well as linguistic differences between courts. The visualization technique combines graphical elements from parallel coordinates and traditional tag clouds to provide rich overviews of a document collection while acting as an entry point for exploration of individual texts. We augment basic parallel tag clouds with a details-in-context display and an option to visualize changes over a second facet of the data, such as time. We also address text mining challenges such as selecting the best words to visualize, and how to do so in reasonable time periods to maintain interactivity." ] }

{ "cite_N": [ "@cite_9", "@cite_1", "@cite_6" ], "mid": [ "2403365036", "2168788994", "160524401" ], "abstract": [ "", "We investigate the readability of node-link diagrams for directed graphs when using partially drawn links instead of showing each link explicitly in its full length. Providing the complete link information between related nodes in a graph can lead to visual clutter caused by many edge crossings. To reduce visual clutter, we draw only partial links. Then, the question arises if such diagrams are still readable, understandable, and interpretable. As a step toward answering this question, we conducted a controlled user experiment with 42 participants to uncover differences in accuracy and completion time for three different tasks: identifying the existence of a direct link, the existence of an indirect connection with one intermediate node, and the node with the largest number of outgoing edges. Furthermore, we compared tapered and traditional edge representations, three different graph sizes, and six different link lengths. In all configurations, the nodes of the graph were placed according to the force-directed layout by Fruchterman and Reingold. One result of this study is that the characteristics of completion times and error rates depend on the type of task. A general observation is that partially drawn links can lead to shorter task completion times, which occurs for nearly all graph sizes, tasks, and both tapered and traditional edge representations. In contrast, there is a tendency toward higher error rates for shorter links, which in fact is task-dependent.", "One of the main principles for the effective visualization of graphs is the avoidance of edge crossings. Around this problem, very active research has been performed with works ranging from combinatorics, to algorithmics, visualization effects, to psychological user studies. Recently, the pragmatic approach has been proposed to avoid crossings by drawing the edges only partially. Unfortunately, no formal model and efficient algorithms have been formulated to this end. We introduce the concept for drawings of graphs with partially drawn edges (PED). Therefore we consider graphs with and without given embedding and characterize PEDs with concepts like symmetry and homogeneity. For graphs without embedding we formulate a sufficient condition to guarantee a symmetric homogeneous PED, and identify a nontrivial graph class which has a symmetric homogeneous PED. For graphs with given layout we consider the variants of maximizing the shortest partially drawn edge and the total length respectively." ] }

{ "cite_N": [ "@cite_0", "@cite_5", "@cite_10" ], "mid": [ "2406810977", "2567569351", "2770013200" ], "abstract": [ "Partial edge drawing PED is a model for a straight-line drawing of a graph, where edges are subdivided into three parts in order to drop the middle part.", "Partial Edge Drawing (PED) is a popular graph drawing style aimed at reducing edge crossings and visual clutter. PEDs are straight-line drawings where the central part of each edge is erased, and the length of the two remaining segments are computed so as to preserve useful geometric information. Recent studies on this approach focus on symmetric and δ-homogeneous PEDs (δ-SHPEDs). Given a straight-line drawing, a δ-SHPED of this drawing is immediately defined for a fixed value of δ. In particular, some edge crossings may not be avoidable, although the amount of ink removed from the original drawing might be large (e.g., 50 when δ = 1 4). On the other hand, it is possible to maximize the ink and remove edge crossings by renouncing to homogeneity. We present heuristics to produce symmetric PEDs that are either crossing-free or where crossings forming large angles are allowed. We also describe a user study in which PEDs obtained via our heuristics are compared with the standard model 1 4-SHPED. Our results suggest that the benefit of homogeneity overcomes in terms of readability the benefit of fewer crossings and more ink.", "Partially drawn links are a possibility to reduce visual clutter in node-link visualizations of relational data caused by link crossings. Although partial links have some benefits concerning task performance, they exhibit issues regarding target node ambiguities. In this paper, we provide the results of a user study that investigates the performance in terms of task accuracy when judging target nodes to which partial links are pointing. We vary the link lengths and link directions as independent variables and measure the task accuracy as dependent variable while the exposure duration for each stimulus is fixed. The major result of our user study is that people tend to make more target node judgment errors with shorter link lengths. Moreover, the direction of the partial links also has an impact on the accuracy. With these results, we are able to choose appropriate parameter settings for graphs drawn with partial links. This can be regarded as a novel graph drawing criterion for improving the readability of graphs represented with partial links." ] }

{ "cite_N": [ "@cite_4", "@cite_12", "@cite_7" ], "mid": [ "2117161218", "2789365861", "2122675754" ], "abstract": [ "In this paper, we present a new visual way of exploring state sequences in large observational time-series. A key advantage of our method is that it can directly visualize higher-order state transitions. A standard first order state transition is a sequence of two states that are linked by a transition. A higher-order state transition is a sequence of three or more states where the sequence of participating states are linked together by consecutive first order state transitions. Our method extends the current state-graph exploration methods by employing a two dimensional graph, in which higher-order state transitions are visualized as curved lines. All transitions are bundled into thick splines, so that the thickness of an edge represents the frequency of instances. The bundling between two states takes into account the state transitions before and after the transition. This is done in such a way that it forms a continuous representation in which any subsequence of the timeseries is represented by a continuous smooth line. The edge bundles in these graphs can be explored interactively through our incremental selection algorithm. We demonstrate our method with an application in exploring labeled time-series data from a biological survey, where a clustering has assigned a single label to the data at each time-point. In these sequences, a large number of cyclic patterns occur, which in turn are linked to specific activities. We demonstrate how our method helps to find these cycles, and how the interactive selection process helps to find and investigate activities.", "Network edge data attributes are usually encoded using color, opacity, stroke thickness and stroke pattern, or some combination thereof. In addition to these static variables, it is also possible to animate dynamic particles flowing along the edges. This opens a larger design space of animated edge textures, featuring additional visual encodings that have potential not only in terms of visual mapping capacity but also playfulness and aesthetics. Such animated edge textures have been used in several commercial and design-oriented visualizations, but to our knowledge almost always in a relatively ad hoc manner. We introduce a design space and Web-based framework for generating animated edge textures, and report on an initial evaluation of particle properties - particle speed, pattern and frequency - in terms of visual perception.", "We present the results of a study comparing five directed-edge representations for use in 2D, screen-based node-link diagrams. The goal of this work is to extend the understanding of tradeoffs and best practices for the representation of edges in directed graphs and to help practitioners choose among different options. Our work applies to graphs in which directed links are depicted using lines connecting the nodes. We tested five different edge representations chosen carefully based on user feedback to thoroughly cover the directed-edge design space. We also investigated how the use of pattern compression affects performance and subjective user preference. The article presents detailed results regarding the significant performance and preference differences between directed-edge representations and provides practical recommendations on their use." ] }

{ "cite_N": [ "@cite_19", "@cite_27", "@cite_13", "@cite_33" ], "mid": [ "2750215633", "2787455114", "2794558150", "2593751597" ], "abstract": [ "In this paper, we consider convolutional neural networks operating on sparse inputs with an application to depth upsampling from sparse laser scan data. First, we show that traditional convolutional networks perform poorly when applied to sparse data even when the location of missing data is provided to the network. To overcome this problem, we propose a simple yet effective sparse convolution layer which explicitly considers the location of missing data during the convolution operation. We demonstrate the benefits of the proposed network architecture in synthetic and real experiments with respect to various baseline approaches. Compared to dense baselines, the proposed sparse convolution network generalizes well to novel datasets and is invariant to the level of sparsity in the data. For our evaluation, we derive a novel dataset from the KITTI benchmark, comprising 93k depth annotated RGB images. Our dataset allows for training and evaluating depth upsampling and depth prediction techniques in challenging real-world settings and will be made available upon publication.", "With the rise of data driven deep neural networks as a realization of universal function approximators, most research on computer vision problems has moved away from hand crafted classical image processing algorithms. This paper shows that with a well designed algorithm, we are capable of outperforming neural network based methods on the task of depth completion. The proposed algorithm is simple and fast, runs on the CPU, and relies only on basic image processing operations to perform depth completion of sparse LIDAR depth data. We evaluate our algorithm on the challenging KITTI depth completion benchmark, and at the time of submission, our method ranks first on the KITTI test server among all published methods. Furthermore, our algorithm is data independent, requiring no training data to perform the task at hand. The code written in Python will be made publicly available at this https URL", "In this paper we consider the problem of estimating a dense depth map from a set of sparse LiDAR points. We use techniques from compressed sensing and the recently developed Alternating Direction Neural Networks (ADNNs) to create a deep recurrent auto-encoder for this task. Our architecture internally performs an algorithm for extracting multi-level convolutional sparse codes from the input which are then used to make a prediction. Our results demonstrate that with only two layers and 1800 parameters we are able to out perform all previously published results, including deep networks with orders of magnitude more parameters.", "We consider the case in which a robot has to navigate in an unknown environment but does not have enough on-board power or payload to carry a traditional depth sensor (e.g., a 3D lidar) and thus can only acquire a few (point-wise) depth measurements. We address the following question: is it possible to reconstruct the geometry of an unknown environment using sparse and incomplete depth measurements? Reconstruction from incomplete data is not possible in general, but when the robot operates in man-made environments, the depth exhibits some regularity (e.g., many planar surfaces with only a few edges); we leverage this regularity to infer depth from a small number of measurements. Our first contribution is a formulation of the depth reconstruction problem that bridges robot perception with the compressive sensing literature in signal processing. The second contribution includes a set of formal results that ascertain the exactness and stability of the depth reconstruction in 2D and 3D problems, and completely characterize the geometry of the profiles that we can reconstruct. Our third contribution is a set of practical algorithms for depth reconstruction: our formulation directly translates into algorithms for depth estimation based on convex programming. In real-world problems, these convex programs are very large and general-purpose solvers are relatively slow. For this reason, we discuss ad-hoc solvers that enable fast depth reconstruction in real problems. The last contribution is an extensive experimental evaluation in 2D and 3D problems, including Monte Carlo runs on simulated instances and testing on multiple real datasets. Empirical results confirm that the proposed approach ensures accurate depth reconstruction, outperforms interpolation-based strategies, and performs well even when the assumption of structured environment is violated." ] }

{ "cite_N": [ "@cite_30", "@cite_26", "@cite_4", "@cite_14", "@cite_1", "@cite_17", "@cite_3", "@cite_15", "@cite_25", "@cite_11" ], "mid": [ "2949661992", "2796461436", "2888634437", "2810837462", "2760112017", "2886851716", "2810477386", "", "2805646839", "2952075905" ], "abstract": [ "Many standard robotic platforms are equipped with at least a fixed 2D laser range finder and a monocular camera. Although those platforms do not have sensors for 3D depth sensing capability, knowledge of depth is an essential part in many robotics activities. Therefore, recently, there is an increasing interest in depth estimation using monocular images. As this task is inherently ambiguous, the data-driven estimated depth might be unreliable in robotics applications. In this paper, we have attempted to improve the precision of monocular depth estimation by introducing 2D planar observation from the remaining laser range finder without extra cost. Specifically, we construct a dense reference map from the sparse laser range data, redefining the depth estimation task as estimating the distance between the real and the reference depth. To solve the problem, we construct a novel residual of residual neural network, and tightly combine the classification and regression losses for continuous depth estimation. Experimental results suggest that our method achieves considerable promotion compared to the state-of-the-art methods on both NYUD2 and KITTI, validating the effectiveness of our method on leveraging the additional sensory information. We further demonstrate the potential usage of our method in obstacle avoidance where our methodology provides comprehensive depth information compared to the solution using monocular camera or 2D laser range finder alone.", "We present a deep model that can accurately produce dense depth maps given an RGB image with known depth at a very sparse set of pixels. The model works simultaneously for both indoor outdoor scenes and produces state-of-the-art dense depth maps at nearly real-time speeds on both the NYUv2 and KITTI datasets. We surpass the state-of-the-art for monocular depth estimation even with depth values for only 1 out of every ( 10000 ) image pixels, and we outperform other sparse-to-dense depth methods at all sparsity levels. With depth values for (1 256 ) of the image pixels, we achieve a mean error of less than (1 ) of actual depth on indoor scenes, comparable to the performance of consumer-grade depth sensor hardware. Our experiments demonstrate that it would indeed be possible to efficiently transform sparse depth measurements obtained using e.g. lower-power depth sensors or SLAM systems into high-quality dense depth maps.", "Dense depth cues are important and have wide applications in various computer vision tasks. In autonomous driving, LIDAR sensors are adopted to acquire depth measurements around the vehicle to perceive the surrounding environments. However, depth maps obtained by LIDAR are generally sparse because of its hardware limitation. The task of depth completion attracts increasing attention, which aims at generating a dense depth map from an input sparse depth map. To effectively utilize multi-scale features, we propose three novel sparsity-invariant operations, based on which, a sparsity-invariant multi-scale encoder-decoder network (HMS-Net) for handling sparse inputs and sparse feature maps is also proposed. Additional RGB features could be incorporated to further improve the depth completion performance. Our extensive experiments and component analysis on two public benchmarks, KITTI depth completion benchmark and NYU-depth-v2 dataset, demonstrate the effectiveness of the proposed approach. As of Aug. 12th, 2018, on KITTI depth completion leaderboard, our proposed model without RGB guidance ranks first among all peer-reviewed methods without using RGB information, and our model with RGB guidance ranks second among all RGB-guided methods.", "Depth completion, the technique of estimating a dense depth image from sparse depth measurements, has a variety of applications in robotics and autonomous driving. However, depth completion faces 3 main challenges: the irregularly spaced pattern in the sparse depth input, the difficulty in handling multiple sensor modalities (when color images are available), as well as the lack of dense, pixel-level ground truth depth labels. In this work, we address all these challenges. Specifically, we develop a deep regression model to learn a direct mapping from sparse depth (and color images) to dense depth. We also propose a self-supervised training framework that requires only sequences of color and sparse depth images, without the need for dense depth labels. Our experiments demonstrate that our network, when trained with semi-dense annotations, attains state-of-the- art accuracy and is the winning approach on the KITTI depth completion benchmark at the time of submission. Furthermore, the self-supervised framework outperforms a number of existing solutions trained with semi- dense annotations.", "We consider the problem of dense depth prediction from a sparse set of depth measurements and a single RGB image. Since depth estimation from monocular images alone is inherently ambiguous and unreliable, to attain a higher level of robustness and accuracy, we introduce additional sparse depth samples, which are either acquired with a low-resolution depth sensor or computed via visual Simultaneous Localization and Mapping (SLAM) algorithms. We propose the use of a single deep regression network to learn directly from the RGB-D raw data, and explore the impact of number of depth samples on prediction accuracy. Our experiments show that, compared to using only RGB images, the addition of 100 spatially random depth samples reduces the prediction root-mean-square error by 50 on the NYU-Depth-v2 indoor dataset. It also boosts the percentage of reliable prediction from 59 to 92 on the KITTI dataset. We demonstrate two applications of the proposed algorithm: a plug-in module in SLAM to convert sparse maps to dense maps, and super-resolution for LiDARs. Software and video demonstration are publicly available.", "Convolutional neural networks are designed for dense data, but vision data is often sparse (stereo depth, point clouds, pen stroke, etc.). We present a method to handle sparse depth data with optional dense RGB, and accomplish depth completion and semantic segmentation changing only the last layer. Our proposal efficiently learns sparse features without the need of an additional validity mask. We show how to ensure network robustness to varying input sparsities. Our method even works with densities as low as 0.8 (8 layer lidar), and outperforms all published state-of-the-art on the Kitti depth completion benchmark.", "Depth estimation has achieved considerable success with the development of the depth sensor devices and deep learning method. However, depth estimation from monocular RGB-based image will increase ambiguity and is prone to error. In this paper, we present a novel approach to produce dense depth map from a single image coupled with coarse point-cloud samples. Our approach learns to fit the distribution of the depth map from source data using conditional adversarial networks and convert the sparse point clouds to dense maps. Our experiments show that the use of the conditional adversarial networks can add full image information to the predicted depth maps and the effectiveness of our approach to predict depth in NYU-Depth-v2 indoor dataset.", "", "In most computer vision applications, convolutional neural networks (CNNs) operate on dense image data generated by ordinary cameras. Designing CNNs for sparse and irregularly spaced input data is still an open problem with numerous applications in autonomous driving, robotics, and surveillance. To tackle this challenging problem, we introduce an algebraically-constrained convolution layer for CNNs with sparse input and demonstrate its capabilities for the scene depth completion task. We propose novel strategies for determining the confidence from the convolution operation and propagating it to consecutive layers. Furthermore, we propose an objective function that simultaneously minimizes the data error while maximizing the output confidence. Comprehensive experiments are performed on the KITTI depth benchmark and the results clearly demonstrate that the proposed approach achieves superior performance while requiring three times fewer parameters than the state-of-the-art methods. Moreover, our approach produces a continuous pixel-wise confidence map enabling information fusion, state inference, and decision support.", "We present the bilateral solver, a novel algorithm for edge-aware smoothing that combines the flexibility and speed of simple filtering approaches with the accuracy of domain-specific optimization algorithms. Our technique is capable of matching or improving upon state-of-the-art results on several different computer vision tasks (stereo, depth superresolution, colorization, and semantic segmentation) while being 10-1000 times faster than competing approaches. The bilateral solver is fast, robust, straightforward to generalize to new domains, and simple to integrate into deep learning pipelines." ] }

{ "cite_N": [ "@cite_22", "@cite_7", "@cite_21", "@cite_24", "@cite_5", "@cite_31" ], "mid": [ "607933207", "1973233493", "2005441409", "2139242438", "1967027087", "2004421506" ], "abstract": [ "1. Introduction F. Marvasti. 2. An Introduction to Sampling Analysis P.L. Butzer, et al 3. Lagrange Interpolation and Sampling Theorems A.I. Zayed, P.L. Butzer. 4. Random Topics in Nonuniform Sampling F. Marvasti. 5. Iterative and Noniterative Recovery of Missing Samples for 1- D Band-Limited Signals P.J.S.G. Ferreira. 6. Numerical and Theoretical Aspects of Nonuniform Sampling of Band-Limited Images K. Grochenig, T. Strohmer. 7. The Nonuniform Discrete Fourier Transform S. Bagchi, S.K. Mitra. 8. Reconstruction of Stationary Processes Sampled at Random Times B. Lacaze. 9. Zero Crossings of Random Processes with Application to Estimation and Detection J. Barnett. 10. Magnetic Resonance Image Reconstruction from Nonuniformly Sampled k-Space Data F.T.A.W. Wajer, et al 11. Irregular and Sparse Sampling in Exploration Seismology A.J.W. Duijndam, et al 12. Randomized Digital Optimal Control W.L. de Koning, L.G. van Willigenburg. 13. Prediction of Band-Limited Signals from Past Samples and Applications to Speech Coding D.H. Muler, Y. Wu. 14. Frames, Irregular Sampling, and a Wavelet Auditory Model J.J. Benedetto, S. Scott. 15. Application of the Nonuniform Sampling to Motion Compensated Prediction A. Sharif, et al 16. Applications of Nonuniform Sampling to Nonlinear Modulation, A D and D A Techniques F. Marvasti, M. Sandler. 17. Applications to Error Correction Codes F. Marvasti. 18. Application of Nonuniform Sampling to Error Concealment M. Hasan, F. Marvasti. 19. Sparse Sampling in Array Processing S. Holm, et al 20. Fractional Delay Filters: Design and Applications V. Valimaki, T.I. Laakso.", "In this paper, we present a comprehensive review of methods for spectral analysis of nonuniformly sampled data. For a given finite set of nonuniformly sampled data, a reasonable way to choose the Nyquist frequency and the resampling time are discussed. The various existing methods for spectral analysis of nonuniform data are grouped and described under four broad categories: methods based on least squares; methods based on interpolation techniques; methods based on slotted resampling; methods based on continuous time models. The performance of the methods under each category is evaluated on simulated data sets. The methods are then classified according to their capabilities to handle different types of spectrum, signal models and sampling patterns. Finally the performance of the different methods is evaluated on two real life nonuniform data sets. Apart from the spectral analysis methods, methods for exact signal reconstruction from nonuniform data are also reviewed.", "The rapid development of 3D technology and computer vision applications has motivated a thrust of methodologies for depth acquisition and estimation. However, existing hardware and software acquisition methods have limited performance due to poor depth precision, low resolution, and high computational cost. In this paper, we present a computationally efficient method to estimate dense depth maps from sparse measurements. There are three main contributions. First, we provide empirical evidence that depth maps can be encoded much more sparsely than natural images using common dictionaries, such as wavelets and contourlets. We also show that a combined wavelet-contourlet dictionary achieves better performance than using either dictionary alone. Second, we propose an alternating direction method of multipliers (ADMM) for depth map reconstruction. A multiscale warm start procedure is proposed to speed up the convergence. Third, we propose a two-stage randomized sampling scheme to optimally choose the sampling locations, thus maximizing the reconstruction performance for a given sampling budget. Experimental results show that the proposed method produces high-quality dense depth estimates, and is robust to noisy measurements. Applications to real data in stereo matching are demonstrated.", "The purpose of this investigation is to examine four special nonuniform sampling processes in detail, and to deduce some interesting properties of bandwidth-limited signals. The main results are contained in four generalized sampling theorems. These theorems not only contain the nature of determination (unique-specification, over-specification, and underspecification) of signals but also include explicit reconstruction formulas. From the reconstruction formulas, the complexity and accuracy of the nonuniform sampling processes discussed can be estimated. In addition, these theorems lead to observations regarding the allowable shapes, the \"prediction,\" and the \"energy\" of bandwidth-limited signals in general. A \"minimum-energy\" signal is introduced which has certain advantages as compared to the ordinary \"time-limited\" signals when a finite number of sample values are given. Finally, a statement due to Cauchy on the sampling of bandwidth-limited signals is generalized to include a wider class of nonuniform sample point distributions and modified to give more exact information regarding the nature of determination of signals.", "In this work we propose a method for estimating disparity maps from very few measurements. Based on the theory of Compressive Sensing, our algorithm accurately reconstructs disparity maps only using about 5 of the entire map. We propose a conjugate subgradient method for the arising optimization problem that is applicable to large scale systems and recovers the disparity map efficiently. Experiments are provided that show the effectiveness of the proposed approach and robust behavior under noisy conditions.", "This article discusses modern techniques for nonuniform sampling and reconstruction of functions in shift-invariant spaces. It is a survey as well as a research paper and provides a unified framework for uniform and nonuniform sampling and reconstruction in shift-invariant subspaces by bringing together wavelet theory, frame theory, reproducing kernel Hilbert spaces, approximation theory, amalgam spaces, and sampling. Inspired by applications taken from communication, astronomy, and medicine, the following aspects will be emphasized: (a) The sampling problem is well defined within the setting of shift-invariant spaces. (b) The general theory works in arbitrary dimension and for a broad class of generators. (c) The reconstruction of a function from any sufficiently dense nonuniform sampling set is obtained by efficient iterative algorithms. These algorithms converge geometrically and are robust in the presence of noise. (d) To model the natural decay conditions of real signals and images, the sampling theory is developed in weighted L p-spaces." ] }

{ "cite_N": [ "@cite_30", "@cite_35", "@cite_4", "@cite_22", "@cite_7", "@cite_46", "@cite_9", "@cite_42", "@cite_27", "@cite_23", "@cite_5", "@cite_47", "@cite_34" ], "mid": [ "", "1515504392", "", "2395654457", "", "1976948167", "2006566091", "2160237541", "2153723155", "", "2144230296", "", "118182368" ], "abstract": [ "", "Characteristics of Games offers a new way to understand games: by focusing on certain traits--including number of players, rules, degrees of luck and skill needed, and reward effort ratio--and using these characteristics as basic points of comparison and analysis. These issues are often discussed by game players and designers but seldom written about in any formal way. This book fills that gap. By emphasizing these player-centric basic concepts, the book provides a framework for game analysis from the viewpoint of a game designer. The book shows what all genres of games--board games, card games, computer games, and sports--have to teach each other. Today's game designers may find solutions to design problems when they look at classic games that have evolved over years of playing. Characteristics of Games--written by three of the most prominent game designers working today--will serve as an essential reference for game designers and game players curious about the inner workings of games. It includes exercises (which can also serve as the basis for discussions) and examples chosen from a wide variety of games. There are occasional mathematical digressions, but these can be skipped with no loss of continuity. Appendixes offer supplementary material, including a brief survey of the two main branches of mathematical game theory and a descriptive listing of each game referred to in the text.", "", "Motivated by our ongoing efforts in the development of Refraction 2, a puzzle game targeting mathematics education, we realized that the quality of a puzzle is critically sensitive to the presence of alternative solutions with undesirable properties. Where, in our game, we seek a way to automatically synthesize puzzles that can only be solved if the player demonstrates specific concepts, concern for the possibility of undesirable play touches other interactive design domains. To frame this problem (and our solution to it) in a general context, we formalize the problem of generating solvable puzzles that admit no undesirable solutions as an NPcomplete search problem. By making two design-oriented extensions to answer set programming (a technology that has been recently applied to constrained game content generation problems) we offer a general way to declaratively pose and automatically solve the high-complexity problems coming from this formulation. Applying this technique to Refraction, we demonstrate a qualitative leap in the kind of puzzles we can reliably generate. This work opens up new possibilities for quality-focused content generators that guarantee properties over their entire combinatorial space of play.", "", "The pace at which challenges are introduced in a game has long been identified as a key determinant of both the enjoyment and difficulty experienced by game players, and their ability to learn from game play. In order to understand how to best pace challenges in games, there is great value in analysing games already demonstrated as highly engaging. Play-through videos of four puzzle games (Portal, Portal 2 Co-operative mode, Braid and Lemmings), were observed and analysed using metrics derived from a behavioural psychology understanding of how people solve problems. Findings suggest that; 1) the main skills learned in each game are introduced separately, 2) through simple puzzles that require only basic performance of that skill, 3) the player has the opportunity to practice and integrate that skill with previously learned skills, and 4) puzzles increase in complexity until the next new skill is introduced. These data provide practical guidance for designers, support contemporary thinking on the design of learning structures in games, and suggest future directions for empirical research.", "Behavioral datasets from major commercial game titles of the “AAA” grade generally feature high dimensionality and large sample sizes, from tens of thousands to millions, covering time scales stretching into several years of real-time, and evolving user populations. This makes dimensionality-reduction methods such as clustering and classification useful for discovering and defining patterns in player behavior. The goal from the perspective of game development is the formation of behavioral profiles that provide actionable insights into how a game is being played, and enables the detection of e.g. problems hindering player progression. Due to its unsupervised nature, clustering is notably useful in cases where no prior-defined classes exist. Previous research in this area has successfully applied clustering algorithms to behavioral datasets from different games. In this paper, the focus is on examining the behavior of 62,000 players from the major commercial game Tomb Raider: Underworld, as it unfolds from the beginning of the game and throughout the seven main levels of the game. Where previous research has focused on aggregated behavioral datasets spanning an entire game, or conversely a limited slice or snapshot viewed in isolation, this is to the best knowledge of the authors the first study to examine the application of clustering methods to player behavior as it evolves throughout an entire game.", "It is easy to create new combinatorial games but more difficult to predict those that will interest human players. We examine the concept of game quality, its automated measurement through self-play simulations, and its use in the evolutionary search for new high-quality games. A general game system called Ludi is described and experiments conducted to test its ability to synthesize and evaluate new games. Results demonstrate the validity of the approach through the automated creation of novel, interesting, and publishable games.", "Non-negative matrix factorization (NMF) has recently received a lot of attention in data mining, information retrieval, and computer vision. It factorizes a non-negative input matrix V into two non-negative matrix factors V = WH such that W describes \"clusters\" of the datasets. Analyzing genotypes, social networks, or images, it can be beneficial to ensure V to contain meaningful cluster centroids'', i.e., to restrict W to be convex combinations of data points. But how can we run this convex NMF in the wild, i.e., given millions of data points? Triggered by the simple observation that each data point is a convex combination of vertices of the data convex hull, we propose to restrict W further to be vertices of the convex hull. The benefits of this convex-hull NMF approach are twofold. First, the expected size of the convex hull of the candidate set typically grows much slower than the data set. Second, distance preserving low-dimensional embeddings allow one to compute candidate vertices efficiently. Our extensive experimental evaluation shows that convex-hull NMF compares favorably to convex NMF for large data sets both in terms of speed and reconstruction quality. Moreover, we show that our method can easily be applied to large-scale, real-world data sets, in our case consisting of 1.6 million images respectively 160 million votes on World of Warcraft guilds.", "", "This paper presents a first attempt at evolving the rules for a game. In contrast to almost every other paper that applies computational intelligence techniques to games, we are not generating behaviours, strategies or environments for any particular game; we are starting without a game and generating the game itself. We explain the rationale for doing this and survey the theories of entertainment and curiosity that underly our fitness function, and present the details of a simple proof-of-concept experiment.", "", "We present initial results from ACCME, A Co-operative Co-evolutionary Metroidvania Engine, which uses co-operative co-evolution to automatically evolve simple platform games. We describe the system in detail and justify the use of co-operative co-evolution. We then address two fundamental questions about the use of this method in automated game design, both in terms of its ability to maximise fitness functions, and whether our choice of fitness function produces scores which correlate with player preference in the resulting games." ] }

{ "cite_N": [ "@cite_38", "@cite_37", "@cite_8", "@cite_41", "@cite_36", "@cite_28", "@cite_21", "@cite_1", "@cite_3", "@cite_24", "@cite_10", "@cite_17" ], "mid": [ "", "1991331404", "", "2099587183", "2077755260", "158154636", "788042400", "2003683447", "", "2039870579", "2126316555", "2169621922" ], "abstract": [ "", "Monte Carlo Tree Search (MCTS) is applied to control the player character in a clone of the popular platform game Super Mario Bros. Standard MCTS is applied through search in state space with the goal of moving the furthest to the right as quickly as possible. Despite parameter tuning, only moderate success is reached. Several modifications to the algorithm are then introduced specifically to deal with the behavioural pathologies that were observed. Two of the modifications are to our best knowledge novel. A combination of these modifications is found to lead to almost perfect play on linear levels. Furthermore, when adding noise to the benchmark, MCTS outperforms the best known algorithm for these levels. The analysis and algorithmic innovations in this paper are likely to be useful when applying MCTS to other video games.", "", "A general game playing system is one that can accept a formal description of a game and play the game effectively without human intervention. Unlike specialized game players, such as Deep Blue, general game players do not rely on algorithms designed in advance for specific games; and, unlike Deep Blue, they are able to play different kinds of games. In order to promote work in this area, the AAAI is sponsoring an open competition at this summer's Twentieth National Conference on Artificial Intelligence. This article is an overview of the technical issues and logistics associated with this summer's competition, as well as the relevance of general game playing to the long range-goals of artificial intelligence.", "In this paper, we examine the use of Monte Carlo tree search (MCTS) for a variant of one of the most popular and profitable games in the world: the card game Magic: The Gathering (M:TG). The game tree for M:TG has a range of distinctive features, which we discuss here; it has incomplete information through the opponent's hidden cards and randomness through card drawing from a shuffled deck. We investigate a wide range of approaches that use determinization, where all hidden and random information is assumed known to all players, alongside MCTS. We consider a number of variations to the rollout strategy using a range of levels of sophistication and expert knowledge, and decaying reward to encourage play urgency. We examine the effect of utilizing various pruning strategies in order to increase the information gained from each determinization, alongside methods that increase the relevance of random choices. Additionally, we deconstruct the move generation procedure into a binary yes no decision tree and apply MCTS to this finer grained decision process. We compare our modifications to a basic MCTS approach for M:TG using fixed decks, and show that significant improvements in playing strength can be obtained.", "We demonstrate generating complete and playable card games using evolutionary algorithms. Card games are represented in a previously devised card game description language, a context-free grammar. The syntax of this language allows us to use grammar-guided genetic programming. Candidate card games are evaluated through a cascading evaluation function, a multi-step process where games with undesired properties are progressively weeded out. Three representa- tive examples of generated games are analysed. We observed that these games are reasonably balanced and have skill ele- ments, they are not yet entertaining for human players. The particular shortcomings of the examples are discussed in re- gard to the generative process to be able to generate quality games", "In order to generate complete games through evolution we need generic and reliably evaluation functions for games. It has been suggested that game quality could be characterised through playing a game with different controllers and comparing their performance. This paper explores that idea through investigating the relative performance of different general game-playing algorithms. Seven game-playing algorithms was used to play several hand-designed, mutated and randomly generated VGDL game descriptions. Results discussed appear to support the conjecture that well-designed games have, in average, a higher performance difference between better and worse game-playing algorithms.", "We present EvoMCTS, a genetic programming method for enhancing level of play in games. Our work focuses on the zero-sum, deterministic, perfect-information board game of Reversi. Expanding on our previous work on evolving board-state evaluation functions for alpha-beta search algorithm variants, we now evolve evaluation functions that augment the MTCS algorithm. We use strongly typed genetic programming, explicitly defined introns, and a selective directional crossover method. Our system regularly evolves players that outperform MCTS players that use the same amount of search. Our results prove scalable and EvoMCTS players whose search is increased offline still outperform MCTS counterparts. To demonstrate the generality of our method we apply EvoMCTS successfully to the game of Dodgem.", "", "© 1997-2012 IEEE. This paper presents a method for generating complex problems that allow multiple nonobvious solutions for the physical traveling salesman problem (PTSP). PTSP is a single-player game adaptation of the classical traveling salesman problem that makes use of a simple physics model: the player has to visit a number of waypoints as quickly as possible by navigating a ship in real time across an obstacle-filled 2-D map. The difficulty of this game depends on the distribution of waypoints and obstacles across the 2-D plane. Due to the physics of the game, the shortest route is not necessarily the fastest, as the ship's momentum makes it difficult to turn sharply at high speed. This paper proposes an evolutionary approach to obtaining maps where the optimal solution is not immediately obvious. In particular, any optimal route for these maps should differ distinctively from: 1) the optimal distance-based TSP route and 2) the route that corresponds to always approaching the nearest waypoint first. To achieve this, the evolutionary algorithm covariance matrix adaptation-evolutionary strategy (CMA-ES) is employed, where maps, indirectly represented as vectors of real numbers, are evolved to differentiate maximally between a game-playing agent that follows two or more different routes. The results presented in this paper show that CMA-ES is able to generate maps that fulfil the desired conditions.", "Monte Carlo tree search (MCTS) is a recently proposed search method that combines the precision of tree search with the generality of random sampling. It has received considerable interest due to its spectacular success in the difficult problem of computer Go, but has also proved beneficial in a range of other domains. This paper is a survey of the literature to date, intended to provide a snapshot of the state of the art after the first five years of MCTS research. We outline the core algorithm's derivation, impart some structure on the many variations and enhancements that have been proposed, and summarize the results from the key game and nongame domains to which MCTS methods have been applied. A number of open research questions indicate that the field is ripe for future work.", "The Strategy Game Description Game Language (SGDL) is intended to become a complete description of all aspects of strategy games, including rules, parameters, scenarios, maps, and unit types. Our aim is to be able to model a wide variety of strategy games, simple ones as well as complex commercially available titles. In our previous work [1] we introduced the basic concepts of modelling game rules in a tree structure and evaluating them through simulated playthrough. In this paper we present some additions to the language and discuss and compare three methods to evaluate the quality of a set of game rules in two different scenarios. We find that the proposed evaluation measures are complementary, and depend on the artificial agent used." ] }

{ "cite_N": [ "@cite_38", "@cite_31", "@cite_41", "@cite_48", "@cite_46", "@cite_44", "@cite_43", "@cite_40", "@cite_15", "@cite_51", "@cite_12" ], "mid": [ "2787927827", "2790197930", "1917516492", "2797520986", "2763783057", "2804558096", "2900585917", "2806983170", "2798918712", "2623187518", "2767597557" ], "abstract": [ "", "How can we effectively encode evolving information over dynamic graphs into low-dimensional representations? In this paper, we propose DyRep, an inductive deep representation learning framework that learns a set of functions to efficiently produce low-dimensional node embeddings that evolves over time. The learned embeddings drive the dynamics of two key processes namely, communication and association between nodes in dynamic graphs. These processes exhibit complex nonlinear dynamics that evolve at different time scales and subsequently contribute to the update of node embeddings. We employ a time-scale dependent multivariate point process model to capture these dynamics. We devise an efficient unsupervised learning procedure and demonstrate that our approach significantly outperforms representative baselines on two real-world datasets for the problem of dynamic link prediction and event time prediction.", "We propose a temporal latent space model for link prediction in dynamic social networks, where the goal is to predict links over time based on a sequence of previous graph snapshots. The model assumes that each user lies in an unobserved latent space, and interactions are more likely to occur between similar users in the latent space representation. In addition, the model allows each user to gradually move its position in the latent space as the network structure evolves over time. We present a global optimization algorithm to effectively infer the temporal latent space. Two alternative optimization algorithms with local and incremental updates are also proposed, allowing the model to scale to larger networks without compromising prediction accuracy. Empirically, we demonstrate that our model, when evaluated on a number of real-world dynamic networks, significantly outperforms existing approaches for temporal link prediction in terms of both scalability and predictive power.", "The temporal dynamics of a complex system such as a social network or a communication network can be studied by understanding the patterns of link appearance and disappearance over time. A critical task along this understanding is to predict the link state of the network at a future time given a collection of link states at earlier time points. In existing literature, this task is known as link prediction in dynamic networks. Solving this task is more difficult than its counterpart in static networks because an effective feature representation of node-pair instances for the case of dynamic network is hard to obtain. To overcome this problem, we propose a novel method for metric embedding of node-pair instances of a dynamic network. The proposed method models the metric embedding task as an optimal coding problem where the objective is to minimize the reconstruction error, and it solves this optimization task using a gradient descent method. We validate the effectiveness of the learned feature representation by utilizing it for link prediction in various real-life dynamic networks. Specifically, we show that our proposed link prediction model, which uses the extracted feature representation for the training instances, outperforms several existing methods that use well-known link prediction features.", "Online social networks, World Wide Web, media and technological networks, and other types of so-called information networks are ubiquitous nowadays. These information networks are inherently heterogeneous and dynamic. They are heterogeneous as they consist of multi-typed objects and relations, and they are dynamic as they are constantly evolving over time. One of the challenging issues in such heterogeneous and dynamic environments is to forecast those relationships in the network that will appear in the future. In this paper, we try to solve the problem of continuous-time relationship prediction in dynamic and heterogeneous information networks. This implies predicting the time it takes for a relationship to appear in the future, given its features that have been extracted by considering both the heterogeneity and the temporal dynamics of the underlying network. To this end, we first introduce a meta-path-based feature extraction framework to effectively extract features suitable for relationship prediction regarding the heterogeneity and dynamicity of the network. Next, we propose a supervised nonparametric approach, called Non-Parametric Generalized Linear Model (NP-GLM), which infers the hidden underlying probability distribution of the relationship building time given its features. We then present a learning algorithm to train NP-GLM and an inference method to answer time-related queries. Extensive experiments conducted on both synthetic dataset and real-world DBLP bibliographic citation network dataset demonstrate the effectiveness of Np-Glm in solving continuous-time relationship prediction problem vis-a-vis alternative baselines.", "Network embedding task aims at learning low-dimension latent representations of vertices while preserving the structure of a network simultaneously. Most existing network embedding methods mainly focus on static networks, which extract and condense the network information without temporal information. However, in the real world, networks keep evolving, where the linkage states between the same vertex pairs at consequential timestamps have very close correlations. In this paper, we propose to study the network embedding problem and focus on modeling the linkage evolution in the dynamic network setting. To address this problem, we propose a deep dynamic network embedding method. More specifically, the method utilizes the historical information obtained from the network snapshots at past timestamps to learn latent representations of the future network. In the proposed embedding method, the objective function is carefully designed to incorporate both the network internal and network dynamic transition structures. Extensive empirical experiments prove the effectiveness of the proposed model on various categories of real-world networks, including a human contact network, a bibliographic network, and e-mail networks. Furthermore, the experimental results also demonstrate the significant advantages of the method compared with both the state-of-the-art embedding techniques and several existing baseline methods.", "", "Embedding large graphs in low dimensional spaces has recently attracted significant interest due to its wide applications such as graph visualization, link prediction and node classification. Existing methods focus on computing the embedding for static graphs. However, many graphs in practical applications are dynamic and evolve constantly over time. Naively applying existing embedding algorithms to each snapshot of dynamic graphs independently usually leads to unsatisfactory performance in terms of stability, flexibility and efficiency. In this work, we present an efficient algorithm DynGEM based on recent advances in deep autoencoders for graph embeddings, to address this problem. The major advantages of DynGEM include: (1) the embedding is stable over time, (2) it can handle growing dynamic graphs, and (3) it has better running time than using static embedding methods on each snapshot of a dynamic graph. We test DynGEM on a variety of tasks including graph visualization, graph reconstruction, link prediction and anomaly detection (on both synthetic and real datasets). Experimental results demonstrate the superior stability and scalability of our approach.", "Networks evolve continuously over time with the addition, deletion, and changing of links and nodes. Although many networks contain this type of temporal information, the majority of research in network representation learning has focused on static snapshots of the graph and has largely ignored the temporal dynamics of the network. In this work, we describe a general framework for incorporating temporal information into network embedding methods. The framework gives rise to methods for learning time-respecting embeddings from continuous-time dynamic networks. Overall, the experiments demonstrate the effectiveness of the proposed framework and dynamic network embedding approach as it achieves an average gain of 11.9 across all methods and graphs. The results indicate that modeling temporal dependencies in graphs is important for learning appropriate and meaningful network representations.", "Network embedding leverages the node proximity manifested to learn a low-dimensional node vector representation for each node in the network. The learned embeddings could advance various learning tasks such as node classification, network clustering, and link prediction. Most, if not all, of the existing works, are overwhelmingly performed in the context of plain and static networks. Nonetheless, in reality, network structure often evolves over time with addition deletion of links and nodes. Also, a vast majority of real-world networks are associated with a rich set of node attributes, and their attribute values are also naturally changing, with the emerging of new content patterns and the fading of old content patterns. These changing characteristics motivate us to seek an effective embedding representation to capture network and attribute evolving patterns, which is of fundamental importance for learning in a dynamic environment. To our best knowledge, we are the first to tackle this problem with the following two challenges: (1) the inherently correlated network and node attributes could be noisy and incomplete, it necessitates a robust consensus representation to capture their individual properties and correlations; (2) the embedding learning needs to be performed in an online fashion to adapt to the changes accordingly. In this paper, we tackle this problem by proposing a novel dynamic attributed network embedding framework - DANE. In particular, DANE first provides an offline method for a consensus embedding and then leverages matrix perturbation theory to maintain the freshness of the end embedding results in an online manner. We perform extensive experiments on both synthetic and real attributed networks to corroborate the effectiveness and efficiency of the proposed framework.", "Node embedding techniques have gained prominence since they produce continuous and low-dimensional features, which are effective for various tasks. Most existing approaches learn node embeddings by exploring the structure of networks and are mainly focused on static non-attributed graphs. However, many real-world applications, such as stock markets and public review websites, involve bipartite graphs with dynamic and attributed edges, called attributed interaction graphs. Different from conventional graph data, attributed interaction graphs involve two kinds of entities (e.g. investors stocks and users businesses) and edges of temporal interactions with attributes (e.g. transactions and reviews). In this paper, we study the problem of node embedding in attributed interaction graphs. Learning embeddings in interaction graphs is highly challenging due to the dynamics and heterogeneous attributes of edges. Different from conventional static graphs, in attributed interaction graphs, each edge can have totally different meanings when the interaction is at different times or associated with different attributes. We propose a deep node embedding method called IGE (Interaction Graph Embedding). IGE is composed of three neural networks: an encoding network is proposed to transform attributes into a fixed-length vector to deal with the heterogeneity of attributes; then encoded attribute vectors interact with nodes multiplicatively in two coupled prediction networks that investigate the temporal dependency by treating incident edges of a node as the analogy of a sentence in word embedding methods. The encoding network can be specifically designed for different datasets as long as it is differentiable, in which case it can be trained together with prediction networks by back-propagation. We evaluate our proposed method and various comparing methods on four real-world datasets. The experimental results prove the effectiveness of the learned embeddings by IGE on both node clustering and classification tasks." ] }

{ "cite_N": [ "@cite_21", "@cite_10" ], "mid": [ "2535547924", "2739423245" ], "abstract": [ "We present ORB-SLAM2, a complete simultaneous localization and mapping (SLAM) system for monocular, stereo and RGB-D cameras, including map reuse, loop closing, and relocalization capabilities. The system works in real time on standard central processing units in a wide variety of environments from small hand-held indoors sequences, to drones flying in industrial environments and cars driving around a city. Our back-end, based on bundle adjustment with monocular and stereo observations, allows for accurate trajectory estimation with metric scale. Our system includes a lightweight localization mode that leverages visual odometry tracks for unmapped regions and matches with map points that allow for zero-drift localization. The evaluation on 29 popular public sequences shows that our method achieves state-of-the-art accuracy, being in most cases the most accurate SLAM solution. We publish the source code, not only for the benefit of the SLAM community, but with the aim of being an out-of-the-box SLAM solution for researchers in other fields.", "Traditional approaches to simultaneous localization and mapping (SLAM) rely on low-level geometric features such as points, lines, and planes. They are unable to assign semantic labels to landmarks observed in the environment. Furthermore, loop closure recognition based on low-level features is often viewpoint-dependent and subject to failure in ambiguous or repetitive environments. On the other hand, object recognition methods can infer landmark classes and scales, resulting in a small set of easily recognizable landmarks, ideal for view-independent unambiguous loop closure. In a map with several objects of the same class, however, a crucial data association problem exists. While data association and recognition are discrete problems usually solved using discrete inference, classical SLAM is a continuous optimization over metric information. In this paper, we formulate an optimization problem over sensor states and semantic landmark positions that integrates metric information, semantic information, and data associations, and decompose it into two interconnected problems: an estimation of discrete data association and landmark class probabilities, and a continuous optimization over the metric states. The estimated landmark and robot poses affect the association and class distributions, which in turn affect the robot-landmark pose optimization. The performance of our algorithm is demonstrated on indoor and outdoor datasets." ] }

{ "cite_N": [ "@cite_15" ], "mid": [ "2951590555" ], "abstract": [ "The dominant paradigm for feature learning in computer vision relies on training neural networks for the task of object recognition using millions of hand labelled images. Is it possible to learn useful features for a diverse set of visual tasks using any other form of supervision? In biology, living organisms developed the ability of visual perception for the purpose of moving and acting in the world. Drawing inspiration from this observation, in this work we investigate if the awareness of egomotion can be used as a supervisory signal for feature learning. As opposed to the knowledge of class labels, information about egomotion is freely available to mobile agents. We show that given the same number of training images, features learnt using egomotion as supervision compare favourably to features learnt using class-label as supervision on visual tasks of scene recognition, object recognition, visual odometry and keypoint matching." ] }

{ "cite_N": [ "@cite_38", "@cite_7", "@cite_9", "@cite_29", "@cite_6" ], "mid": [ "2609883120", "", "2785512290", "2773227160", "2608018946" ], "abstract": [ "We present an unsupervised learning framework for the task of monocular depth and camera motion estimation from unstructured video sequences. In common with recent work [10, 14, 16], we use an end-to-end learning approach with view synthesis as the supervisory signal. In contrast to the previous work, our method is completely unsupervised, requiring only monocular video sequences for training. Our method uses single-view depth and multiview pose networks, with a loss based on warping nearby views to the target using the computed depth and pose. The networks are thus coupled by the loss during training, but can be applied independently at test time. Empirical evaluation on the KITTI dataset demonstrates the effectiveness of our approach: 1) monocular depth performs comparably with supervised methods that use either ground-truth pose or depth for training, and 2) pose estimation performs favorably compared to established SLAM systems under comparable input settings.", "", "We present a novel approach for unsupervised learning of depth and ego-motion from monocular video. Unsupervised learning removes the need for separate supervisory signals (depth or ego-motion ground truth, or multi-view video). Prior work in unsupervised depth learning uses pixel-wise or gradient-based losses, which only consider pixels in small local neighborhoods. Our main contribution is to explicitly consider the inferred 3D geometry of the scene, enforcing consistency of the estimated 3D point clouds and ego-motion across consecutive frames. This is a challenging task and is solved by a novel (approximate) backpropagation algorithm for aligning 3D structures. We combine this novel 3D-based loss with 2D losses based on photometric quality of frame reconstructions using estimated depth and ego-motion from adjacent frames. We also incorporate validity masks to avoid penalizing areas in which no useful information exists. We test our algorithm on the KITTI dataset and on a video dataset captured on an uncalibrated mobile phone camera. Our proposed approach consistently improves depth estimates on both datasets, and outperforms the state-of-the-art for both depth and ego-motion. Because we only require a simple video, learning depth and ego-motion on large and varied datasets becomes possible. We demonstrate this by training on the low quality uncalibrated video dataset and evaluating on KITTI, ranking among top performing prior methods which are trained on KITTI itself.", "The ability to predict depth from a single image - using recent advances in CNNs - is of increasing interest to the vision community. Unsupervised strategies to learning are particularly appealing as they can utilize much larger and varied monocular video datasets during learning without the need for ground truth depth or stereo. In previous works, separate pose and depth CNN predictors had to be determined such that their joint outputs minimized the photometric error. Inspired by recent advances in direct visual odometry (DVO), we argue that the depth CNN predictor can be learned without a pose CNN predictor. Further, we demonstrate empirically that incorporation of a differentiable implementation of DVO, along with a novel depth normalization strategy - substantially improves performance over state of the art that use monocular videos for training.", "We propose SfM-Net, a geometry-aware neural network for motion estimation in videos that decomposes frame-to-frame pixel motion in terms of scene and object depth, camera motion and 3D object rotations and translations. Given a sequence of frames, SfM-Net predicts depth, segmentation, camera and rigid object motions, converts those into a dense frame-to-frame motion field (optical flow), differentiably warps frames in time to match pixels and back-propagates. The model can be trained with various degrees of supervision: 1) self-supervised by the re-projection photometric error (completely unsupervised), 2) supervised by ego-motion (camera motion), or 3) supervised by depth (e.g., as provided by RGBD sensors). SfM-Net extracts meaningful depth estimates and successfully estimates frame-to-frame camera rotations and translations. It often successfully segments the moving objects in the scene, even though such supervision is never provided." ] }

{ "cite_N": [ "@cite_46", "@cite_20", "@cite_39" ], "mid": [ "2952280228", "", "2795447360" ], "abstract": [ "Given the recent advances in depth prediction from Convolutional Neural Networks (CNNs), this paper investigates how predicted depth maps from a deep neural network can be deployed for accurate and dense monocular reconstruction. We propose a method where CNN-predicted dense depth maps are naturally fused together with depth measurements obtained from direct monocular SLAM. Our fusion scheme privileges depth prediction in image locations where monocular SLAM approaches tend to fail, e.g. along low-textured regions, and vice-versa. We demonstrate the use of depth prediction for estimating the absolute scale of the reconstruction, hence overcoming one of the major limitations of monocular SLAM. Finally, we propose a framework to efficiently fuse semantic labels, obtained from a single frame, with dense SLAM, yielding semantically coherent scene reconstruction from a single view. Evaluation results on two benchmark datasets show the robustness and accuracy of our approach.", "", "The representation of geometry in real-time 3D perception systems continues to be a critical research issue. Dense maps capture complete surface shape and can be augmented with semantic labels, but their high dimensionality makes them computationally costly to store and process, and unsuitable for rigorous probabilistic inference. Sparse feature-based representations avoid these problems, but capture only partial scene information and are mainly useful for localisation only. We present a new compact but dense representation of scene geometry which is conditioned on the intensity data from a single image and generated from a code consisting of a small number of parameters. We are inspired by work both on learned depth from images, and auto-encoders. Our approach is suitable for use in a keyframe-based monocular dense SLAM system: While each keyframe with a code can produce a depth map, the code can be optimised efficiently jointly with pose variables and together with the codes of overlapping keyframes to attain global consistency. Conditioning the depth map on the image allows the code to only represent aspects of the local geometry which cannot directly be predicted from the image. We explain how to learn our code representation, and demonstrate its advantageous properties in monocular SLAM." ] }

{ "cite_N": [ "@cite_24", "@cite_23", "@cite_11" ], "mid": [ "2899902398", "2406343628", "2403334028" ], "abstract": [ "Inserting proper punctuation into Automatic Speech Recognizer(ASR) transcription is a challenging and promising task in real-time Spoken Language Translation(SLT). Traditional methods built on the sequence labelling framework are weak in handling the joint punctuation. To tackle this problem, we propose a novel self-attention based network, which can solve the aforementioned problem very well. In this work, a light-weight neural net is proposed to extract the hidden features based solely on self-attention without any Recurrent Neural Nets(RNN) and Convolutional Neural Nets(CNN). We conduct extensive experiments on complex punctuation tasks. The experimental results show that the proposed model achieves significant improvements on joint punctuation task while being superior to traditional methods on simple punctuation task as well.", "Punctuation prediction is an important task in Spoken Language Translation. The output of speech recognition systems does not typically contain punctuation marks. In this paper we analyze different methods for punctuation prediction and show improvements in the quality of the final translation output. In our experiments we compare the different approaches and show improvements of up to 0.8 BLEU points on the IWSLT 2011 English French Speech Translation of Talks task using a translation system to translate from unpunctuated to punctuated text instead of a language model based punctuation prediction method. Furthermore, we do a system combination of the hypotheses of all our different approaches and get an additional improvement of 0.4 points in BLEU.", "" ] }

{ "cite_N": [ "@cite_37", "@cite_62", "@cite_28", "@cite_1", "@cite_3", "@cite_39", "@cite_0", "@cite_57", "@cite_79", "@cite_45", "@cite_84" ], "mid": [ "2950681848", "2951019013", "2081605477", "", "2144990732", "", "2768185495", "2593174349", "1989476314", "1893935112", "" ], "abstract": [ "RANSAC is an important algorithm in robust optimization and a central building block for many computer vision applications. In recent years, traditionally hand-crafted pipelines have been replaced by deep learning pipelines, which can be trained in an end-to-end fashion. However, RANSAC has so far not been used as part of such deep learning pipelines, because its hypothesis selection procedure is non-differentiable. In this work, we present two different ways to overcome this limitation. The most promising approach is inspired by reinforcement learning, namely to replace the deterministic hypothesis selection by a probabilistic selection for which we can derive the expected loss w.r.t. to all learnable parameters. We call this approach DSAC, the differentiable counterpart of RANSAC. We apply DSAC to the problem of camera localization, where deep learning has so far failed to improve on traditional approaches. We demonstrate that by directly minimizing the expected loss of the output camera poses, robustly estimated by RANSAC, we achieve an increase in accuracy. In the future, any deep learning pipeline can use DSAC as a robust optimization component.", "We tackle the problem of large scale visual place recognition, where the task is to quickly and accurately recognize the location of a given query photograph. We present the following three principal contributions. First, we develop a convolutional neural network (CNN) architecture that is trainable in an end-to-end manner directly for the place recognition task. The main component of this architecture, NetVLAD, is a new generalized VLAD layer, inspired by the \"Vector of Locally Aggregated Descriptors\" image representation commonly used in image retrieval. The layer is readily pluggable into any CNN architecture and amenable to training via backpropagation. Second, we develop a training procedure, based on a new weakly supervised ranking loss, to learn parameters of the architecture in an end-to-end manner from images depicting the same places over time downloaded from Google Street View Time Machine. Finally, we show that the proposed architecture significantly outperforms non-learnt image representations and off-the-shelf CNN descriptors on two challenging place recognition benchmarks, and improves over current state-of-the-art compact image representations on standard image retrieval benchmarks.", "We address the problem of estimating the pose of a cam- era relative to a known 3D scene from a single RGB-D frame. We formulate this problem as inversion of the generative rendering procedure, i.e., we want to find the camera pose corresponding to a rendering of the 3D scene model that is most similar with the observed input. This is a non-convex optimization problem with many local optima. We propose a hybrid discriminative-generative learning architecture that consists of: (i) a set of M predictors which generate M camera pose hypotheses, and (ii) a 'selector' or 'aggregator' that infers the best pose from the multiple pose hypotheses based on a similarity function. We are interested in predictors that not only produce good hypotheses but also hypotheses that are different from each other. Thus, we propose and study methods for learning 'marginally relevant' predictors, and compare their performance when used with different selection procedures. We evaluate our method on a recently released 3D reconstruction dataset with challenging camera poses, and scene variability. Experiments show that our method learns to make multiple predictions that are marginally relevant and can effectively select an accurate prediction. Furthermore, our method outperforms the state-of-the-art discriminative approach for camera relocalization.", "", "Recognizing the location of a query image by matching it to a database is an important problem in computer vision, and one for which the representation of the database is a key issue. We explore new ways for exploiting the structure of a database by representing it as a graph, and show how the rich information embedded in a graph can improve a bag-of-words-based location recognition method. In particular, starting from a graph on a set of images based on visual connectivity, we propose a method for selecting a set of sub graphs and learning a local distance function for each using discriminative techniques. For a query image, each database image is ranked according to these local distance functions in order to place the image in the right part of the graph. In addition, we propose a probabilistic method for increasing the diversity of these ranked database images, again based on the structure of the image graph. We demonstrate that our methods improve performance over standard bag-of-words methods on several existing location recognition datasets.", "", "Popular research areas like autonomous driving and augmented reality have renewed the interest in image-based camera localization. In this work, we address the task of predicting the 6D camera pose from a single RGB image in a given 3D environment. With the advent of neural networks, previous works have either learned the entire camera localization process, or multiple components of a camera localization pipeline. Our key contribution is to demonstrate and explain that learning a single component of this pipeline is sufficient. This component is a fully convolutional neural network for densely regressing so-called scene coordinates, defining the correspondence between the input image and the 3D scene space. The neural network is prepended to a new end-to-end trainable pipeline. Our system is efficient, highly accurate, robust in training, and exhibits outstanding generalization capabilities. It exceeds state-of-the-art consistently on indoor and outdoor datasets. Interestingly, our approach surpasses existing techniques even without utilizing a 3D model of the scene during training, since the network is able to discover 3D scene geometry automatically, solely from single-view constraints.", "Camera relocalisation is an important problem in computer vision, with applications in simultaneous localisation and mapping, virtual augmented reality and navigation. Common techniques either match the current image against keyframes with known poses coming from a tracker, or establish 2D-to-3D correspondences between keypoints in the current image and points in the scene in order to estimate the camera pose. Recently, regression forests have become a popular alternative to establish such correspondences. They achieve accurate results, but must be trained offline on the target scene, preventing relocalisation in new environments. In this paper, we show how to circumvent this limitation by adapting a pre-trained forest to a new scene on the fly. Our adapted forests achieve relocalisation performance that is on par with that of offline forests, and our approach runs in under 150ms, making it desirable for real-time systems that require online relocalisation.", "We address the problem of inferring the pose of an RGB-D camera relative to a known 3D scene, given only a single acquired image. Our approach employs a regression forest that is capable of inferring an estimate of each pixel's correspondence to 3D points in the scene's world coordinate frame. The forest uses only simple depth and RGB pixel comparison features, and does not require the computation of feature descriptors. The forest is trained to be capable of predicting correspondences at any pixel, so no interest point detectors are required. The camera pose is inferred using a robust optimization scheme. This starts with an initial set of hypothesized camera poses, constructed by applying the forest at a small fraction of image pixels. Preemptive RANSAC then iterates sampling more pixels at which to evaluate the forest, counting inliers, and refining the hypothesized poses. We evaluate on several varied scenes captured with an RGB-D camera and observe that the proposed technique achieves highly accurate relocalization and substantially out-performs two state of the art baselines.", "Recent advances in camera relocalization use predictions from a regression forest to guide the camera pose optimization procedure. In these methods, each tree associates one pixel with a point in the scene's 3D world coordinate frame. In previous work, these predictions were point estimates and the subsequent camera pose optimization implicitly assumed an isotropic distribution of these estimates. In this paper, we train a regression forest to predict mixtures of anisotropic 3D Gaussians and show how the predicted uncertainties can be taken into account for continuous pose optimization. Experiments show that our proposed method is able to relocalize up to 40 more frames than the state of the art.", "" ] }

{ "cite_N": [ "@cite_18", "@cite_14", "@cite_22", "@cite_91", "@cite_54", "@cite_76", "@cite_20" ], "mid": [ "2284646714", "2951336016", "2605111497", "2584731199", "", "2279895976", "2771385090" ], "abstract": [ "Is it possible to determine the location of a photo from just its pixels? While the general problem seems exceptionally difficult, photos often contain cues such as landmarks, weather patterns, vegetation, road markings, or architectural details, which in combination allow to infer where the photo was taken. Previously, this problem has been approached using image retrieval methods. In contrast, we pose the problem as one of classification by subdividing the surface of the earth into thousands of multi-scale geographic cells, and train a deep network using millions of geotagged images. We show that the resulting model, called PlaNet, outperforms previous approaches and even attains superhuman accuracy in some cases. Moreover, we extend our model to photo albums by combining it with a long short-term memory (LSTM) architecture. By learning to exploit temporal coherence to geolocate uncertain photos, this model achieves a 50 performance improvement over the single-image model.", "We present a robust and real-time monocular six degree of freedom relocalization system. Our system trains a convolutional neural network to regress the 6-DOF camera pose from a single RGB image in an end-to-end manner with no need of additional engineering or graph optimisation. The algorithm can operate indoors and outdoors in real time, taking 5ms per frame to compute. It obtains approximately 2m and 6 degree accuracy for large scale outdoor scenes and 0.5m and 10 degree accuracy indoors. This is achieved using an efficient 23 layer deep convnet, demonstrating that convnets can be used to solve complicated out of image plane regression problems. This was made possible by leveraging transfer learning from large scale classification data. We show the convnet localizes from high level features and is robust to difficult lighting, motion blur and different camera intrinsics where point based SIFT registration fails. Furthermore we show how the pose feature that is produced generalizes to other scenes allowing us to regress pose with only a few dozen training examples. PoseNet code, dataset and an online demonstration is available on our project webpage, at this http URL", "Deep learning has shown to be effective for robust and real-time monocular image relocalisation. In particular, PoseNet [22] is a deep convolutional neural network which learns to regress the 6-DOF camera pose from a single image. It learns to localize using high level features and is robust to difficult lighting, motion blur and unknown camera intrinsics, where point based SIFT registration fails. However, it was trained using a naive loss function, with hyper-parameters which require expensive tuning. In this paper, we give the problem a more fundamental theoretical treatment. We explore a number of novel loss functions for learning camera pose which are based on geometry and scene reprojection error. Additionally we show how to automatically learn an optimal weighting to simultaneously regress position and orientation. By leveraging geometry, we demonstrate that our technique significantly improves PoseNets performance across datasets ranging from indoor rooms to a small city.", "In this work we propose a new CNN+LSTM architecture for camera pose regression for indoor and outdoor scenes. CNNs allow us to learn suitable feature representations for localization that are robust against motion blur and illumination changes. We make use of LSTM units on the CNN output, which play the role of a structured dimensionality reduction on the feature vector, leading to drastic improvements in localization performance. We provide extensive quantitative comparison of CNN-based and SIFT-based localization methods, showing the weaknesses and strengths of each. Furthermore, we present a new large-scale indoor dataset with accurate ground truth from a laser scanner. Experimental results on both indoor and outdoor public datasets show our method outperforms existing deep architectures, and can localize images in hard conditions, e.g., in the presence of mostly textureless surfaces, where classic SIFT-based methods fail.", "", "We present a robust and real-time monocular six degree of freedom visual relocalization system. We use a Bayesian convolutional neural network to regress the 6-DOF camera pose from a single RGB image. It is trained in an end-to-end manner with no need of additional engineering or graph optimisation. The algorithm can operate indoors and outdoors in real time, taking under 6ms to compute. It obtains approximately 2m and 6 degrees accuracy for very large scale outdoor scenes and 0.5m and 10 degrees accuracy indoors. Using a Bayesian convolutional neural network implementation we obtain an estimate of the model's relocalization uncertainty and improve state of the art localization accuracy on a large scale outdoor dataset. We leverage the uncertainty measure to estimate metric relocalization error and to detect the presence or absence of the scene in the input image. We show that the model's uncertainty is caused by images being dissimilar to the training dataset in either pose or appearance.", "Precise localization of robots is imperative for their safe and autonomous navigation in both indoor and outdoor environments. In outdoor scenarios, the environment typically undergoes significant perceptual changes and requires robust methods for accurate localization. Monocular camera-based approaches provide an inexpensive solution to such challenging problems compared to 3D LiDAR-based methods. Recently, approaches have leveraged deep convolutional neural networks (CNNs) to perform place recognition and they turn out to outperform traditional handcrafted features under challenging perceptual conditions. In this paper, we propose an approach for directly regressing a 6-DoF camera pose using CNNs and a single monocular RGB image. We leverage the idea of transfer learning for training our network as this technique has shown to perform better when the number of training samples are not very high. Furthermore, we propose novel data augmentation in 3D space for additional pose coverage which leads to more accurate localization. In contrast to the traditional visual metric localization approaches, our resulting map size is constant with respect to the database. During localization, our approach has a constant time complexity of O(1) and is independent of the database size and runs in real-time at ∼80 Hz using a single GPU. We show the localization accuracy of our approach on publicly available datasets and that it outperforms CNN-based state-of-the-art methods." ] }

{ "cite_N": [ "@cite_48", "@cite_55" ], "mid": [ "2609883120", "2561074213" ], "abstract": [ "We present an unsupervised learning framework for the task of monocular depth and camera motion estimation from unstructured video sequences. In common with recent work [10, 14, 16], we use an end-to-end learning approach with view synthesis as the supervisory signal. In contrast to the previous work, our method is completely unsupervised, requiring only monocular video sequences for training. Our method uses single-view depth and multiview pose networks, with a loss based on warping nearby views to the target using the computed depth and pose. The networks are thus coupled by the loss during training, but can be applied independently at test time. Empirical evaluation on the KITTI dataset demonstrates the effectiveness of our approach: 1) monocular depth performs comparably with supervised methods that use either ground-truth pose or depth for training, and 2) pose estimation performs favorably compared to established SLAM systems under comparable input settings.", "In this paper we formulate structure from motion as a learning problem. We train a convolutional network end-to-end to compute depth and camera motion from successive, unconstrained image pairs. The architecture is composed of multiple stacked encoder-decoder networks, the core part being an iterative network that is able to improve its own predictions. The network estimates not only depth and motion, but additionally surface normals, optical flow between the images and confidence of the matching. A crucial component of the approach is a training loss based on spatial relative differences. Compared to traditional two-frame structure from motion methods, results are more accurate and more robust. In contrast to the popular depth-from-single-image networks, DeMoN learns the concept of matching and, thus, better generalizes to structures not seen during training." ] }

{ "cite_N": [ "@cite_4", "@cite_22", "@cite_9", "@cite_19", "@cite_2", "@cite_16", "@cite_13" ], "mid": [ "2810602713", "2944804155", "2021171258", "2121092017", "2164424353", "2362143032", "2950560044" ], "abstract": [ "Reinforcement learning (RL) has shown great success in increasingly complex single-agent environments and two-player turn-based games. However, the real world contains multiple agents, each learning and acting independently to cooperate and compete with other agents. We used a tournament-style evaluation to demonstrate that an agent can achieve human-level performance in a three-dimensional multiplayer first-person video game, Quake III Arena in Capture the Flag mode, using only pixels and game points scored as input. We used a two-tier optimization process in which a population of independent RL agents are trained concurrently from thousands of parallel matches on randomly generated environments. Each agent learns its own internal reward signal and rich representation of the world. These results indicate the great potential of multiagent reinforcement learning for artificial intelligence research.", "", "The goal of our research is to understand what is required for human-level artificial intelligence (AI). A key component of our methodology is developing AI systems in complex, dynamic environments that have many of the properties of the world we inhabit. Although robotics might seem an obvious choice, research in robotics requires solving many difficult problems related to low-level sensing and acting in the real world that are far removed from the cognitive aspects of intelligence. Simulated virtual environments make it possible to by-pass many of these problems, while preserving the need for intelligent real-time decision-making and interaction. Unfortunately, development of realistic virtual environments is an expensive and timeconsuming enterprise onto itself and requires expertise in many areas far a field from AI. However, computer games provide us with a source of cheap, reliable, and flexible technology for developing our own virtual environments for research.", "Deep Reinforcement Learning has yielded proficient controllers for complex tasks. However, these controllers have limited memory and rely on being able to perceive the complete game screen at each decision point. To address these shortcomings, this article investigates the effects of adding recurrency to a Deep Q-Network (DQN) by replacing the first post-convolutional fully-connected layer with a recurrent LSTM. The resulting (DRQN), although capable of seeing only a single frame at each timestep, successfully integrates information through time and replicates DQN's performance on standard Atari games and partially observed equivalents featuring flickering game screens. Additionally, when trained with partial observations and evaluated with incrementally more complete observations, DRQN's performance scales as a function of observability. Conversely, when trained with full observations and evaluated with partial observations, DRQN's performance degrades less than DQN's. Thus, given the same length of history, recurrency is a viable alternative to stacking a history of frames in the DQN's input layer and while recurrency confers no systematic advantage when learning to play the game, the recurrent net can better adapt at evaluation time if the quality of observations changes.", "There is great interest in building intrinsic motivation into artificial systems using the reinforcement learning framework. Yet, what intrinsic motivation may mean computationally, and how it may differ from extrinsic motivation, remains a murky and controversial subject. In this paper, we adopt an evolutionary perspective and define a new optimal reward framework that captures the pressure to design good primary reward functions that lead to evolutionary success across environments. The results of two computational experiments show that optimal primary reward signals may yield both emergent intrinsic and extrinsic motivation. The evolutionary perspective and the associated optimal reward framework thus lead to the conclusion that there are no hard and fast features distinguishing intrinsic and extrinsic reward computationally. Rather, the directness of the relationship between rewarding behavior and evolutionary success varies along a continuum.", "The recent advances in deep neural networks have led to effective vision-based reinforcement learning methods that have been employed to obtain human-level controllers in Atari 2600 games from pixel data. Atari 2600 games, however, do not resemble real-world tasks since they involve non-realistic 2D environments and the third-person perspective. Here, we propose a novel test-bed platform for reinforcement learning research from raw visual information which employs the first-person perspective in a semi-realistic 3D world. The software, called ViZDoom, is based on the classical first-person shooter video game, Doom. It allows developing bots that play the game using the screen buffer. ViZDoom is lightweight, fast, and highly customizable via a convenient mechanism of user scenarios. In the experimental part, we test the environment by trying to learn bots for two scenarios: a basic move-and-shoot task and a more complex maze-navigation problem. Using convolutional deep neural networks with Q-learning and experience replay, for both scenarios, we were able to train competent bots, which exhibit human-like behaviors. The results confirm the utility of ViZDoom as an AI research platform and imply that visual reinforcement learning in 3D realistic first-person perspective environments is feasible.", "In this paper, we introduce a new set of reinforcement learning (RL) tasks in Minecraft (a flexible 3D world). We then use these tasks to systematically compare and contrast existing deep reinforcement learning (DRL) architectures with our new memory-based DRL architectures. These tasks are designed to emphasize, in a controllable manner, issues that pose challenges for RL methods including partial observability (due to first-person visual observations), delayed rewards, high-dimensional visual observations, and the need to use active perception in a correct manner so as to perform well in the tasks. While these tasks are conceptually simple to describe, by virtue of having all of these challenges simultaneously they are difficult for current DRL architectures. Additionally, we evaluate the generalization performance of the architectures on environments not used during training. The experimental results show that our new architectures generalize to unseen environments better than existing DRL architectures." ] }

{ "cite_N": [ "@cite_18", "@cite_14", "@cite_21", "@cite_0", "@cite_11" ], "mid": [ "2098441518", "1999874108", "2626804490", "1986014385", "2963571918" ], "abstract": [ "A long term goal of Interactive Reinforcement Learning is to incorporate nonexpert human feedback to solve complex tasks. Some state-of-the-art methods have approached this problem by mapping human information to rewards and values and iterating over them to compute better control policies. In this paper we argue for an alternate, more effective characterization of human feedback: Policy Shaping. We introduce Advise, a Bayesian approach that attempts to maximize the information gained from human feedback by utilizing it as direct policy labels. We compare Advise to state-of-the-art approaches and show that it can outperform them and is robust to infrequent and inconsistent human feedback.", "We consider learning in a Markov decision process where we are not explicitly given a reward function, but where instead we can observe an expert demonstrating the task that we want to learn to perform. This setting is useful in applications (such as the task of driving) where it may be difficult to write down an explicit reward function specifying exactly how different desiderata should be traded off. We think of the expert as trying to maximize a reward function that is expressible as a linear combination of known features, and give an algorithm for learning the task demonstrated by the expert. Our algorithm is based on using \"inverse reinforcement learning\" to try to recover the unknown reward function. We show that our algorithm terminates in a small number of iterations, and that even though we may never recover the expert's reward function, the policy output by the algorithm will attain performance close to that of the expert, where here performance is measured with respect to the expert's unknown reward function.", "For sophisticated reinforcement learning (RL) systems to interact usefully with real-world environments, we need to communicate complex goals to these systems. In this work, we explore goals defined in terms of (non-expert) human preferences between pairs of trajectory segments. We show that this approach can effectively solve complex RL tasks without access to the reward function, including Atari games and simulated robot locomotion, while providing feedback on less than one percent of our agent's interactions with the environment. This reduces the cost of human oversight far enough that it can be practically applied to state-of-the-art RL systems. To demonstrate the flexibility of our approach, we show that we can successfully train complex novel behaviors with about an hour of human time. These behaviors and environments are considerably more complex than any that have been previously learned from human feedback.", "We present a comprehensive survey of robot Learning from Demonstration (LfD), a technique that develops policies from example state to action mappings. We introduce the LfD design choices in terms of demonstrator, problem space, policy derivation and performance, and contribute the foundations for a structure in which to categorize LfD research. Specifically, we analyze and categorize the multiple ways in which examples are gathered, ranging from teleoperation to imitation, as well as the various techniques for policy derivation, including matching functions, dynamics models and plans. To conclude we discuss LfD limitations and related promising areas for future research.", "A goal of Interactive Machine Learning is to enable people without specialized training to teach agents how to perform tasks. Many of the existing algorithms that learn from human instructions are evaluated using simulated feedback and focus on how quickly the agent learns. While this is valuable information, it ignores important aspects of the human-agent interaction such as frustration. To correct this, we propose a method for the design and verification of interactive algorithms that includes a human-subject study that measures the human's experience working with the agent. In this paper, we present Newtonian Action Advice, a method of incorporating human verbal action advice with Reinforcement Learning in a way that improves the human-agent interaction. In addition to simulations, we validated the Newtonian Action Advice algorithm by conducting a human-subject experiment. The results show that Newtonian Action Advice can perform better than Policy Shaping, a state-of-the-art IML algorithm, both in terms of RL metrics like cumulative reward and human factors metrics like frustration." ] }

{ "cite_N": [ "@cite_18", "@cite_7", "@cite_17", "@cite_6", "@cite_3", "@cite_24", "@cite_10", "@cite_12", "@cite_11" ], "mid": [ "2098441518", "2754794180", "2785379783", "2116372557", "121023703", "1589747210", "2151074445", "2299638491", "2963571918" ], "abstract": [ "A long term goal of Interactive Reinforcement Learning is to incorporate nonexpert human feedback to solve complex tasks. Some state-of-the-art methods have approached this problem by mapping human information to rewards and values and iterating over them to compute better control policies. In this paper we argue for an alternate, more effective characterization of human feedback: Policy Shaping. We introduce Advise, a Bayesian approach that attempts to maximize the information gained from human feedback by utilizing it as direct policy labels. We compare Advise to state-of-the-art approaches and show that it can outperform them and is robust to infrequent and inconsistent human feedback.", "We describe a method to use discrete human feedback to enhance the performance of deep learning agents in virtual three-dimensional environments by extending deep-reinforcement learning to model the confidence and consistency of human feedback. This enables deep reinforcement learning algorithms to determine the most appropriate time to listen to the human feedback, exploit the current policy model, or explore the agent's environment. Managing the trade-off between these three strategies allows DRL agents to be robust to inconsistent or intermittent human feedback. Through experimentation using a synthetic oracle, we show that our technique improves the training speed and overall performance of deep reinforcement learning in navigating three-dimensional environments using Minecraft. We further show that our technique is robust to highly innacurate human feedback and can also operate when no human feedback is given.", "Robust real-world learning should benefit from both demonstrations and interactions with the environment. Current approaches to learning from demonstration and reward perform supervised learning on expert demonstration data and use reinforcement learning to further improve performance based on the reward received from the environment. These tasks have divergent losses which are difficult to jointly optimize and such methods can be very sensitive to noisy demonstrations. We propose a unified reinforcement learning algorithm, Normalized Actor-Critic (NAC), that effectively normalizes the Q-function, reducing the Q-values of actions unseen in the demonstration data. NAC learns an initial policy network from demonstrations and refines the policy in the environment, surpassing the demonstrator's performance. Crucially, both learning from demonstration and interactive refinement use the same objective, unlike prior approaches that combine distinct supervised and reinforcement losses. This makes NAC robust to suboptimal demonstration data since the method is not forced to mimic all of the examples in the dataset. We show that our unified reinforcement learning algorithm can learn robustly and outperform existing baselines when evaluated on several realistic driving games.", "We report on the use of reinforcement learning with Cobot, a software agent residing in the well-known online community LambdaMOO. Our initial work on Cobot (2000) provided him with the ability to collect social statistics and report them to users. Here we describe an application of RL allowing Cobot to take proactive actions in this complex social environment, and adapt behavior from multiple sources of human reward. After 5 months of training, and 3171 reward and punishment events from 254 different LambdaMOO users, Cobot learned nontrivial preferences for a number of users, modifing his behavior based on his current state. Here we describe LambdaMOO and the state and action spaces of Cobot, and report the statistical results of the learning experiment.", "As robots become a mass consumer product, they will need to learn new skills by interacting with typical human users. Past approaches have adapted reinforcement learning (RL) to accept a human reward signal; however, we question the implicit assumption that people shall only want to give the learner feedback on its past actions. We present findings from a human user study showing that people use the reward signal not only to provide feedback about past actions, but also to provide future directed rewards to guide subsequent actions. Given this, we made specific modifications to the simulated RL robot to incorporate guidance. We then analyze and evaluate its learning performance in a second user study, and we report significant improvements on several measures. This work demonstrates the importance of understanding the human-teacher robot-learner system as a whole in order to design algorithms that support how people want to teach while simultaneously improving the robot's learning performance.", "Reinforcement learning is a branch of machine learning concerned with using experience gained through interacting with the world and evaluative feedback to improve a system's ability to make behavioural decisions. It has been called the artificial intelligence problem in a microcosm because learning algorithms must act autonomously to perform well and achieve their goals. Partly driven by the increasing availability of rich data, recent years have seen exciting advances in the theory and practice of reinforcement learning, including developments in fundamental technical areas such as generalization, planning, exploration and empirical methodology, leading to increasing applicability to real-life problems.", "We present a case study of applying a framework for learning from numeric human feedback–tamer–to a physically embodied robot. In doing so, we also provide the first demonstration of the ability to train multiple behaviors by such feedback without algorithmic modifications and of a robot learning from free-form human-generated feedback without any further guidance or evaluative feedback. We describe transparency challenges specific to a physically embodied robot learning from human feedback and adjustments that address these challenges.", "High-dimensional observations and complex real-world dynamics present major challenges in reinforcement learning for both function approximation and exploration. We address both of these challenges with two complementary techniques: First, we develop a gradient-boosting style, non-parametric function approximator for learning on @math -function residuals. And second, we propose an exploration strategy inspired by the principles of state abstraction and information acquisition under uncertainty. We demonstrate the empirical effectiveness of these techniques, first, as a preliminary check, on two standard tasks (Blackjack and @math -Chain), and then on two much larger and more realistic tasks with high-dimensional observation spaces. Specifically, we introduce two benchmarks built within the game Minecraft where the observations are pixel arrays of the agent's visual field. A combination of our two algorithmic techniques performs competitively on the standard reinforcement-learning tasks while consistently and substantially outperforming baselines on the two tasks with high-dimensional observation spaces. The new function approximator, exploration strategy, and evaluation benchmarks are each of independent interest in the pursuit of reinforcement-learning methods that scale to real-world domains.", "A goal of Interactive Machine Learning is to enable people without specialized training to teach agents how to perform tasks. Many of the existing algorithms that learn from human instructions are evaluated using simulated feedback and focus on how quickly the agent learns. While this is valuable information, it ignores important aspects of the human-agent interaction such as frustration. To correct this, we propose a method for the design and verification of interactive algorithms that includes a human-subject study that measures the human's experience working with the agent. In this paper, we present Newtonian Action Advice, a method of incorporating human verbal action advice with Reinforcement Learning in a way that improves the human-agent interaction. In addition to simulations, we validated the Newtonian Action Advice algorithm by conducting a human-subject experiment. The results show that Newtonian Action Advice can perform better than Policy Shaping, a state-of-the-art IML algorithm, both in terms of RL metrics like cumulative reward and human factors metrics like frustration." ] }

{ "cite_N": [ "@cite_7", "@cite_8" ], "mid": [ "2754794180", "2145339207" ], "abstract": [ "We describe a method to use discrete human feedback to enhance the performance of deep learning agents in virtual three-dimensional environments by extending deep-reinforcement learning to model the confidence and consistency of human feedback. This enables deep reinforcement learning algorithms to determine the most appropriate time to listen to the human feedback, exploit the current policy model, or explore the agent's environment. Managing the trade-off between these three strategies allows DRL agents to be robust to inconsistent or intermittent human feedback. Through experimentation using a synthetic oracle, we show that our technique improves the training speed and overall performance of deep reinforcement learning in navigating three-dimensional environments using Minecraft. We further show that our technique is robust to highly innacurate human feedback and can also operate when no human feedback is given.", "An artificial agent is developed that learns to play a diverse range of classic Atari 2600 computer games directly from sensory experience, achieving a performance comparable to that of an expert human player; this work paves the way to building general-purpose learning algorithms that bridge the divide between perception and action." ] }

{ "cite_N": [ "@cite_11" ], "mid": [ "2963571918" ], "abstract": [ "A goal of Interactive Machine Learning is to enable people without specialized training to teach agents how to perform tasks. Many of the existing algorithms that learn from human instructions are evaluated using simulated feedback and focus on how quickly the agent learns. While this is valuable information, it ignores important aspects of the human-agent interaction such as frustration. To correct this, we propose a method for the design and verification of interactive algorithms that includes a human-subject study that measures the human's experience working with the agent. In this paper, we present Newtonian Action Advice, a method of incorporating human verbal action advice with Reinforcement Learning in a way that improves the human-agent interaction. In addition to simulations, we validated the Newtonian Action Advice algorithm by conducting a human-subject experiment. The results show that Newtonian Action Advice can perform better than Policy Shaping, a state-of-the-art IML algorithm, both in terms of RL metrics like cumulative reward and human factors metrics like frustration." ] }

{ "cite_N": [ "@cite_9", "@cite_27", "@cite_59" ], "mid": [ "2807861409", "2942471690", "2952232639" ], "abstract": [ "Many real-world vision problems suffer from inherent ambiguities. In clinical applications for example, it might not be clear from a CT scan alone which particular region is cancer tissue. Therefore a group of graders typically produces a set of diverse but plausible segmentations. We consider the task of learning a distribution over segmentations given an input. To this end we propose a generative segmentation model based on a combination of a U-Net with a conditional variational autoencoder that is capable of efficiently producing an unlimited number of plausible hypotheses. We show on a lung abnormalities segmentation task and on a Cityscapes segmentation task that our model reproduces the possible segmentation variants as well as the frequencies with which they occur, doing so significantly better than published approaches. These models could have a high impact in real-world applications, such as being used as clinical decision-making algorithms accounting for multiple plausible semantic segmentation hypotheses to provide possible diagnoses and recommend further actions to resolve the present ambiguities.", "We introduce a method to infer a variational approximation to the posterior distribution of solutions in computational imaging inverse problems. Machine learning methods applied to computational imaging have proven very successful, but have so far largely focused on retrieving a single optimal solution for a given task. Such retrieval is arguably an incomplete description of the solution space, as in ill-posed inverse problems there may be many similarly likely reconstructions. We minimise an upper bound on the divergence between our approximate distribution and the true intractable posterior, thereby obtaining a probabilistic description of the solution space in imaging inverse problems with empirical prior. We demonstrate the advantage of our technique in quantitative simulations with the CelebA dataset and common image reconstruction tasks. We then apply our method to two of the currently most challenging problems in experimental optics: imaging through highly scattering media and imaging through multi-modal optical fibres. In both settings we report state of the art reconstructions, while providing new capabilities, such as estimation of error-bars and visualisation of multiple likely reconstructions.", "There is large consent that successful training of deep networks requires many thousand annotated training samples. In this paper, we present a network and training strategy that relies on the strong use of data augmentation to use the available annotated samples more efficiently. The architecture consists of a contracting path to capture context and a symmetric expanding path that enables precise localization. We show that such a network can be trained end-to-end from very few images and outperforms the prior best method (a sliding-window convolutional network) on the ISBI challenge for segmentation of neuronal structures in electron microscopic stacks. Using the same network trained on transmitted light microscopy images (phase contrast and DIC) we won the ISBI cell tracking challenge 2015 in these categories by a large margin. Moreover, the network is fast. Segmentation of a 512x512 image takes less than a second on a recent GPU. The full implementation (based on Caffe) and the trained networks are available at this http URL ." ] }

{ "cite_N": [ "@cite_55", "@cite_54", "@cite_37", "@cite_49" ], "mid": [ "", "2210838531", "2807753879", "2753738274" ], "abstract": [ "", "The standard recurrent neural network language model (RNNLM) generates sentences one word at a time and does not work from an explicit global sentence representation. In this work, we introduce and study an RNN-based variational autoencoder generative model that incorporates distributed latent representations of entire sentences. This factorization allows it to explicitly model holistic properties of sentences such as style, topic, and high-level syntactic features. Samples from the prior over these sentence representations remarkably produce diverse and well-formed sentences through simple deterministic decoding. By examining paths through this latent space, we are able to generate coherent novel sentences that interpolate between known sentences. We present techniques for solving the difficult learning problem presented by this model, demonstrate its effectiveness in imputing missing words, explore many interesting properties of the model's latent sentence space, and present negative results on the use of the model in language modeling.", "We introduce Generative Neural Machine Translation (GNMT), a latent variable architecture which is designed to model the semantics of the source and target sentences. We modify an encoder-decoder translation model by adding a latent variable as a language agnostic representation which is encouraged to learn the meaning of the sentence. GNMT achieves competitive BLEU scores on pure translation tasks, and is superior when there are missing words in the source sentence. We augment the model to facilitate multilingual translation and semi-supervised learning without adding parameters. This framework significantly reduces overfitting when there is limited paired data available, and is effective for translating between pairs of languages not seen during training.", "Learning an interpretable factorised representation of the independent data generative factors of the world without supervision is an important precursor for the development of artificial intelligence that is able to learn and reason in the same way that humans do. We introduce beta-VAE, a new state-of-the-art framework for automated discovery of interpretable factorised latent representations from raw image data in a completely unsupervised manner. Our approach is a modification of the variational autoencoder (VAE) framework. We introduce an adjustable hyperparameter beta that balances latent channel capacity and independence constraints with reconstruction accuracy. We demonstrate that beta-VAE with appropriately tuned beta > 1 qualitatively outperforms VAE (beta = 1), as well as state of the art unsupervised (InfoGAN) and semi-supervised (DC-IGN) approaches to disentangled factor learning on a variety of datasets (celebA, faces and chairs). Furthermore, we devise a protocol to quantitatively compare the degree of disentanglement learnt by different models, and show that our approach also significantly outperforms all baselines quantitatively. Unlike InfoGAN, beta-VAE is stable to train, makes few assumptions about the data and relies on tuning a single hyperparameter, which can be directly optimised through a hyper parameter search using weakly labelled data or through heuristic visual inspection for purely unsupervised data." ] }

{ "cite_N": [ "@cite_28", "@cite_19" ], "mid": [ "2745034467", "2769057555" ], "abstract": [ "We present our experience with QUIC, an encrypted, multiplexed, and low-latency transport protocol designed from the ground up to improve transport performance for HTTPS traffic and to enable rapid deployment and continued evolution of transport mechanisms. QUIC has been globally deployed at Google on thousands of servers and is used to serve traffic to a range of clients including a widely-used web browser (Chrome) and a popular mobile video streaming app (YouTube). We estimate that 7 of Internet traffic is now QUIC. We describe our motivations for developing a new transport, the principles that guided our design, the Internet-scale process that we used to perform iterative experiments on QUIC, performance improvements seen by our various services, and our experience deploying QUIC globally. We also share lessons about transport design and the Internet ecosystem that we learned from our deployment.", "We propose Accel-Brake Control (ABC), a protocol that integrates a simple and deployable signaling scheme at cellular base stations with an endpoint mechanism to respond to these signals. The key idea is for the base station to enable each sender to achieve a computed target rate by marking each packet with an \"accelerate\" or \"brake\" notification, which causes the sender to either slightly increase or slightly reduce its congestion window. ABC is designed to rapidly acquire any capacity that opens up, a common occurrence in cellular networks, while responding promptly to congestion. It is also incrementally deployable using existing ECN infrastructure and can co-exist with legacy ECN routers. Preliminary results obtained over cellular network traces show that ABC outperforms prior approaches significantly." ] }

{ "cite_N": [ "@cite_28", "@cite_9", "@cite_29", "@cite_24", "@cite_40", "@cite_5", "@cite_15" ], "mid": [ "", "2964309882", "", "2963881378", "1903029394", "2476548250", "1849277567" ], "abstract": [ "", "Spatial pyramid pooling module or encode-decoder structure are used in deep neural networks for semantic segmentation task. The former networks are able to encode multi-scale contextual information by probing the incoming features with filters or pooling operations at multiple rates and multiple effective fields-of-view, while the latter networks can capture sharper object boundaries by gradually recovering the spatial information. In this work, we propose to combine the advantages from both methods. Specifically, our proposed model, DeepLabv3+, extends DeepLabv3 by adding a simple yet effective decoder module to refine the segmentation results especially along object boundaries. We further explore the Xception model and apply the depthwise separable convolution to both Atrous Spatial Pyramid Pooling and decoder modules, resulting in a faster and stronger encoder-decoder network. We demonstrate the effectiveness of the proposed model on PASCAL VOC 2012 and Cityscapes datasets, achieving the test set performance of 89 and 82.1 without any post-processing. Our paper is accompanied with a publicly available reference implementation of the proposed models in Tensorflow at https: github.com tensorflow models tree master research deeplab.", "", "We present a novel and practical deep fully convolutional neural network architecture for semantic pixel-wise segmentation termed SegNet. This core trainable segmentation engine consists of an encoder network, a corresponding decoder network followed by a pixel-wise classification layer. The architecture of the encoder network is topologically identical to the 13 convolutional layers in the VGG16 network [1] . The role of the decoder network is to map the low resolution encoder feature maps to full input resolution feature maps for pixel-wise classification. The novelty of SegNet lies is in the manner in which the decoder upsamples its lower resolution input feature map(s). Specifically, the decoder uses pooling indices computed in the max-pooling step of the corresponding encoder to perform non-linear upsampling. This eliminates the need for learning to upsample. The upsampled maps are sparse and are then convolved with trainable filters to produce dense feature maps. We compare our proposed architecture with the widely adopted FCN [2] and also with the well known DeepLab-LargeFOV [3] , DeconvNet [4] architectures. This comparison reveals the memory versus accuracy trade-off involved in achieving good segmentation performance. SegNet was primarily motivated by scene understanding applications. Hence, it is designed to be efficient both in terms of memory and computational time during inference. It is also significantly smaller in the number of trainable parameters than other competing architectures and can be trained end-to-end using stochastic gradient descent. We also performed a controlled benchmark of SegNet and other architectures on both road scenes and SUN RGB-D indoor scene segmentation tasks. These quantitative assessments show that SegNet provides good performance with competitive inference time and most efficient inference memory-wise as compared to other architectures. We also provide a Caffe implementation of SegNet and a web demo at http: mi.eng.cam.ac.uk projects segnet .", "Convolutional networks are powerful visual models that yield hierarchies of features. We show that convolutional networks by themselves, trained end-to-end, pixels-to-pixels, exceed the state-of-the-art in semantic segmentation. Our key insight is to build “fully convolutional” networks that take input of arbitrary size and produce correspondingly-sized output with efficient inference and learning. We define and detail the space of fully convolutional networks, explain their application to spatially dense prediction tasks, and draw connections to prior models. We adapt contemporary classification networks (AlexNet [20], the VGG net [31], and GoogLeNet [32]) into fully convolutional networks and transfer their learned representations by fine-tuning [3] to the segmentation task. We then define a skip architecture that combines semantic information from a deep, coarse layer with appearance information from a shallow, fine layer to produce accurate and detailed segmentations. Our fully convolutional network achieves state-of-the-art segmentation of PASCAL VOC (20 relative improvement to 62.2 mean IU on 2012), NYUDv2, and SIFT Flow, while inference takes less than one fifth of a second for a typical image.", "Recently, several models based on deep neural networks have achieved great success in terms of both reconstruction accuracy and computational performance for single image super-resolution. In these methods, the low resolution (LR) input image is upscaled to the high resolution (HR) space using a single filter, commonly bicubic interpolation, before reconstruction. This means that the super-resolution (SR) operation is performed in HR space. We demonstrate that this is sub-optimal and adds computational complexity. In this paper, we present the first convolutional neural network (CNN) capable of real-time SR of 1080p videos on a single K2 GPU. To achieve this, we propose a novel CNN architecture where the feature maps are extracted in the LR space. In addition, we introduce an efficient sub-pixel convolution layer which learns an array of upscaling filters to upscale the final LR feature maps into the HR output. By doing so, we effectively replace the handcrafted bicubic filter in the SR pipeline with more complex upscaling filters specifically trained for each feature map, whilst also reducing the computational complexity of the overall SR operation. We evaluate the proposed approach using images and videos from publicly available datasets and show that it performs significantly better (+0.15dB on Images and +0.39dB on Videos) and is an order of magnitude faster than previous CNN-based methods.", "Large Convolutional Network models have recently demonstrated impressive classification performance on the ImageNet benchmark [18]. However there is no clear understanding of why they perform so well, or how they might be improved. In this paper we explore both issues. We introduce a novel visualization technique that gives insight into the function of intermediate feature layers and the operation of the classifier. Used in a diagnostic role, these visualizations allow us to find model architectures that outperform on the ImageNet classification benchmark. We also perform an ablation study to discover the performance contribution from different model layers. We show our ImageNet model generalizes well to other datasets: when the softmax classifier is retrained, it convincingly beats the current state-of-the-art results on Caltech-101 and Caltech-256 datasets." ] }

{ "cite_N": [ "@cite_24" ], "mid": [ "2963881378" ], "abstract": [ "We present a novel and practical deep fully convolutional neural network architecture for semantic pixel-wise segmentation termed SegNet. This core trainable segmentation engine consists of an encoder network, a corresponding decoder network followed by a pixel-wise classification layer. The architecture of the encoder network is topologically identical to the 13 convolutional layers in the VGG16 network [1] . The role of the decoder network is to map the low resolution encoder feature maps to full input resolution feature maps for pixel-wise classification. The novelty of SegNet lies is in the manner in which the decoder upsamples its lower resolution input feature map(s). Specifically, the decoder uses pooling indices computed in the max-pooling step of the corresponding encoder to perform non-linear upsampling. This eliminates the need for learning to upsample. The upsampled maps are sparse and are then convolved with trainable filters to produce dense feature maps. We compare our proposed architecture with the widely adopted FCN [2] and also with the well known DeepLab-LargeFOV [3] , DeconvNet [4] architectures. This comparison reveals the memory versus accuracy trade-off involved in achieving good segmentation performance. SegNet was primarily motivated by scene understanding applications. Hence, it is designed to be efficient both in terms of memory and computational time during inference. It is also significantly smaller in the number of trainable parameters than other competing architectures and can be trained end-to-end using stochastic gradient descent. We also performed a controlled benchmark of SegNet and other architectures on both road scenes and SUN RGB-D indoor scene segmentation tasks. These quantitative assessments show that SegNet provides good performance with competitive inference time and most efficient inference memory-wise as compared to other architectures. We also provide a Caffe implementation of SegNet and a web demo at http: mi.eng.cam.ac.uk projects segnet ." ] }

{ "cite_N": [ "@cite_38", "@cite_26", "@cite_39", "@cite_19", "@cite_27", "@cite_49", "@cite_46", "@cite_13", "@cite_25" ], "mid": [ "", "", "", "2035773017", "2098554565", "2077604257", "1560942455", "2963304750", "2103917701" ], "abstract": [ "", "", "", "Interactive digital matting, the process of extracting a foreground object from an image based on limited user input, is an important task in image and video editing. From a computer vision perspective, this task is extremely challenging because it is massively ill-posed - at each pixel we must estimate the foreground and the background colors, as well as the foreground opacity (\"alpha matte\") from a single color measurement. Current approaches either restrict the estimation to a small part of the image, estimating foreground and background colors based on nearby pixels where they are known, or perform iterative nonlinear estimation by alternating foreground and background color estimation with alpha estimation. In this paper, we present a closed-form solution to natural image matting. We derive a cost function from local smoothness assumptions on foreground and background colors and show that in the resulting expression, it is possible to analytically eliminate the foreground and background colors to obtain a quadratic cost function in alpha. This allows us to find the globally optimal alpha matte by solving a sparse linear system of equations. Furthermore, the closed-form formula allows us to predict the properties of the solution by analyzing the eigenvectors of a sparse matrix, closely related to matrices used in spectral image segmentation algorithms. We show that high-quality mattes for natural images may be obtained from a small amount of user input.", "In this paper we propose a novel alpha matting method with local and nonlocal smooth priors. We observe that the manifold preserving editing propagation [4] essentially introduced a nonlocal smooth prior on the alpha matte. This nonlocal smooth prior and the well known local smooth prior from matting Laplacian complement each other. So we combine them with a simple data term from color sampling in a graph model for nature image matting. Our method has a closed-form solution and can be solved efficiently. Compared with the state-of-the-art methods, our method produces more accurate results according to the evaluation on standard benchmark datasets.", "Alpha matting refers to the problem of softly extracting the foreground from an image. Given a trimap (specifying known foreground background and unknown pixels), a straightforward way to compute the alpha value is to sample some known foreground and background colors for each unknown pixel. Existing sampling-based matting methods often collect samples near the unknown pixels only. They fail if good samples cannot be found nearby. In this paper, we propose a global sampling method that uses all samples available in the image. Our global sample set avoids missing good samples. A simple but effective cost function is defined to tackle the ambiguity in the sample selection process. To handle the computational complexity introduced by the large number of samples, we pose the sampling task as a correspondence problem. The correspondence search is efficiently achieved by generalizing a randomized algorithm previously designed for patch matching[3]. A variety of experiments show that our global sampling method produces both visually and quantitatively high-quality matting results.", "We propose an iterative energy minimization framework for interactive image matting. Our approach is easy in the sense that it is fast and requires only few user-specified strokes for marking the foreground and background. Beginning with the known region, we model the unknown region as a Markov Random Field (MRF) and formulate its energy in each iteration as the combination of one data term and one smoothness term. By automatically adjusting the weights of both terms during the iterations, the first-order continuous and feature-preserving result is rapidly obtained with several iterations. The energy optimization can be further performed in selected local regions for refined results. We demonstrate that our energy-driven scheme can be extended to video matting, with which the spatio-temporal smoothness is faithfully preserved. We show that the proposed approach outperforms previous methods in terms of both the quality and performance for quite challenging examples.", "We present a novel, purely affinity-based natural image matting algorithm. Our method relies on carefully defined pixel-to-pixel connections that enable effective use of information available in the image and the trimap. We control the information flow from the known-opacity regions into the unknown region, as well as within the unknown region itself, by utilizing multiple definitions of pixel affinities. This way we achieve significant improvements on matte quality near challenging regions of the foreground object. Among other forms of information flow, we introduce color-mixture flow, which builds upon local linear embedding and effectively encapsulates the relation between different pixel opacities. Our resulting novel linear system formulation can be solved in closed-form and is robust against several fundamental challenges in natural matting such as holes and remote intricate structures. While our method is primarily designed as a standalone natural matting tool, we show that it can also be used for regularizing mattes obtained by various sampling-based methods. Our evaluation using the public alpha matting benchmark suggests a significant performance improvement over the state-of-the-art.", "This paper proposes a new Bayesian framework for solving the matting problem, i.e. extracting a foreground element from a background image by estimating an opacity for each pixel of the foreground element. Our approach models both the foreground and background color distributions with spatially-varying sets of Gaussians, and assumes a fractional blending of the foreground and background colors to produce the final output. It then uses a maximum-likelihood criterion to estimate the optimal opacity, foreground and background simultaneously. In addition to providing a principled approach to the matting problem, our algorithm effectively handles objects with intricate boundaries, such as hair strands and fur, and provides an improvement over existing techniques for these difficult cases." ] }

{ "cite_N": [ "@cite_26", "@cite_4", "@cite_22", "@cite_48", "@cite_1", "@cite_0", "@cite_19", "@cite_40", "@cite_24", "@cite_2", "@cite_31", "@cite_11" ], "mid": [ "", "2807926603", "2518810941", "2962826264", "2891201469", "2163605009", "2035773017", "1903029394", "2963881378", "2604469346", "2102605133", "2520247582" ], "abstract": [ "", "", "We propose an automatic image matting method for portrait images. This method does not need user interaction, which was however essential in most previous approaches. In order to accomplish this goal, a new end-to-end convolutional neural network (CNN) based framework is proposed taking the input of a portrait image. It outputs the matte result. Our method considers not only image semantic prediction but also pixel-level image matte optimization. A new portrait image dataset is constructed with our labeled matting ground truth. Our automatic method achieves comparable results with state-of-the-art methods that require specified foreground and background regions or pixels. Many applications are enabled given the automatic nature of our system.", "This paper addresses the problem of transparent object matting. Existing image matting approaches for transparent objects often require tedious capturing procedures and long processing time, which limit their practical use. In this paper, we first formulate transparent object matting as a refractive flow estimation problem. We then propose a deep learning framework, called TOM-Net, for learning the refractive flow. Our framework comprises two parts, namely a multi-scale encoder-decoder network for producing a coarse prediction, and a residual network for refinement. At test time, TOM-Net takes a single image as input, and outputs a matte (consisting of an object mask, an attenuation mask and a refractive flow field) in a fast feed-forward pass. As no off-the-shelf dataset is available for transparent object matting, we create a large-scale synthetic dataset consisting of 178K images of transparent objects rendered in front of images sampled from the Microsoft COCO dataset. We also collect a real dataset consisting of 876 samples using 14 transparent objects and 60 background images. Promising experimental results have been achieved on both synthetic and real data, which clearly demonstrate the effectiveness of our approach.", "Human matting, high quality extraction of humans from natural images, is crucial for a wide variety of applications. Since the matting problem is severely under-constrained, most previous methods require user interactions to take user designated trimaps or scribbles as constraints. This user-in-the-loop nature makes them difficult to be applied to large scale data or time-sensitive scenarios. In this paper, instead of using explicit user input constraints, we employ implicit semantic constraints learned from data and propose an automatic human matting algorithm Semantic Human Matting(SHM). SHM is the first algorithm that learns to jointly fit both semantic information and high quality details with deep networks. In practice, simultaneously learning both coarse semantics and fine details is challenging. We propose a novel fusion strategy which naturally gives a probabilistic estimation of the alpha matte. We also construct a very large dataset with high quality annotations consisting of 35,513 unique foregrounds to facilitate the learning and evaluation of human matting. Extensive experiments on this dataset and plenty of real images show that SHM achieves comparable results with state-of-the-art interactive matting methods.", "We trained a large, deep convolutional neural network to classify the 1.2 million high-resolution images in the ImageNet LSVRC-2010 contest into the 1000 different classes. On the test data, we achieved top-1 and top-5 error rates of 37.5 and 17.0 which is considerably better than the previous state-of-the-art. The neural network, which has 60 million parameters and 650,000 neurons, consists of five convolutional layers, some of which are followed by max-pooling layers, and three fully-connected layers with a final 1000-way softmax. To make training faster, we used non-saturating neurons and a very efficient GPU implementation of the convolution operation. To reduce overriding in the fully-connected layers we employed a recently-developed regularization method called \"dropout\" that proved to be very effective. We also entered a variant of this model in the ILSVRC-2012 competition and achieved a winning top-5 test error rate of 15.3 , compared to 26.2 achieved by the second-best entry.", "Interactive digital matting, the process of extracting a foreground object from an image based on limited user input, is an important task in image and video editing. From a computer vision perspective, this task is extremely challenging because it is massively ill-posed - at each pixel we must estimate the foreground and the background colors, as well as the foreground opacity (\"alpha matte\") from a single color measurement. Current approaches either restrict the estimation to a small part of the image, estimating foreground and background colors based on nearby pixels where they are known, or perform iterative nonlinear estimation by alternating foreground and background color estimation with alpha estimation. In this paper, we present a closed-form solution to natural image matting. We derive a cost function from local smoothness assumptions on foreground and background colors and show that in the resulting expression, it is possible to analytically eliminate the foreground and background colors to obtain a quadratic cost function in alpha. This allows us to find the globally optimal alpha matte by solving a sparse linear system of equations. Furthermore, the closed-form formula allows us to predict the properties of the solution by analyzing the eigenvectors of a sparse matrix, closely related to matrices used in spectral image segmentation algorithms. We show that high-quality mattes for natural images may be obtained from a small amount of user input.", "Convolutional networks are powerful visual models that yield hierarchies of features. We show that convolutional networks by themselves, trained end-to-end, pixels-to-pixels, exceed the state-of-the-art in semantic segmentation. Our key insight is to build “fully convolutional” networks that take input of arbitrary size and produce correspondingly-sized output with efficient inference and learning. We define and detail the space of fully convolutional networks, explain their application to spatially dense prediction tasks, and draw connections to prior models. We adapt contemporary classification networks (AlexNet [20], the VGG net [31], and GoogLeNet [32]) into fully convolutional networks and transfer their learned representations by fine-tuning [3] to the segmentation task. We then define a skip architecture that combines semantic information from a deep, coarse layer with appearance information from a shallow, fine layer to produce accurate and detailed segmentations. Our fully convolutional network achieves state-of-the-art segmentation of PASCAL VOC (20 relative improvement to 62.2 mean IU on 2012), NYUDv2, and SIFT Flow, while inference takes less than one fifth of a second for a typical image.", "We present a novel and practical deep fully convolutional neural network architecture for semantic pixel-wise segmentation termed SegNet. This core trainable segmentation engine consists of an encoder network, a corresponding decoder network followed by a pixel-wise classification layer. The architecture of the encoder network is topologically identical to the 13 convolutional layers in the VGG16 network [1] . The role of the decoder network is to map the low resolution encoder feature maps to full input resolution feature maps for pixel-wise classification. The novelty of SegNet lies is in the manner in which the decoder upsamples its lower resolution input feature map(s). Specifically, the decoder uses pooling indices computed in the max-pooling step of the corresponding encoder to perform non-linear upsampling. This eliminates the need for learning to upsample. The upsampled maps are sparse and are then convolved with trainable filters to produce dense feature maps. We compare our proposed architecture with the widely adopted FCN [2] and also with the well known DeepLab-LargeFOV [3] , DeconvNet [4] architectures. This comparison reveals the memory versus accuracy trade-off involved in achieving good segmentation performance. SegNet was primarily motivated by scene understanding applications. Hence, it is designed to be efficient both in terms of memory and computational time during inference. It is also significantly smaller in the number of trainable parameters than other competing architectures and can be trained end-to-end using stochastic gradient descent. We also performed a controlled benchmark of SegNet and other architectures on both road scenes and SUN RGB-D indoor scene segmentation tasks. These quantitative assessments show that SegNet provides good performance with competitive inference time and most efficient inference memory-wise as compared to other architectures. We also provide a Caffe implementation of SegNet and a web demo at http: mi.eng.cam.ac.uk projects segnet .", "Image matting is a fundamental computer vision problem and has many applications. Previous algorithms have poor performance when an image has similar foreground and background colors or complicated textures. The main reasons are prior methods 1) only use low-level features and 2) lack high-level context. In this paper, we propose a novel deep learning based algorithm that can tackle both these problems. Our deep model has two parts. The first part is a deep convolutional encoder-decoder network that takes an image and the corresponding trimap as inputs and predict the alpha matte of the image. The second part is a small convolutional network that refines the alpha matte predictions of the first network to have more accurate alpha values and sharper edges. In addition, we also create a large-scale image matting dataset including 49300 training images and 1000 testing images. We evaluate our algorithm on the image matting benchmark, our testing set, and a wide variety of real images. Experimental results clearly demonstrate the superiority of our algorithm over previous methods.", "Object detection performance, as measured on the canonical PASCAL VOC dataset, has plateaued in the last few years. The best-performing methods are complex ensemble systems that typically combine multiple low-level image features with high-level context. In this paper, we propose a simple and scalable detection algorithm that improves mean average precision (mAP) by more than 30 relative to the previous best result on VOC 2012 -- achieving a mAP of 53.3 . Our approach combines two key insights: (1) one can apply high-capacity convolutional neural networks (CNNs) to bottom-up region proposals in order to localize and segment objects and (2) when labeled training data is scarce, supervised pre-training for an auxiliary task, followed by domain-specific fine-tuning, yields a significant performance boost. Since we combine region proposals with CNNs, we call our method R-CNN: Regions with CNN features. We also present experiments that provide insight into what the network learns, revealing a rich hierarchy of image features. Source code for the complete system is available at http: www.cs.berkeley.edu rbg rcnn.", "We propose a deep Convolutional Neural Networks (CNN) method for natural image matting. Our method takes results of the closed form matting, results of the KNN matting and normalized RGB color images as inputs, and directly learns an end-to-end mapping between the inputs, and reconstructed alpha mattes. We analyze pros and cons of the closed form matting, and the KNN matting in terms of local and nonlocal principle, and show that they are complementary to each other. A major benefit of our method is that it can “recognize” different local image structures, and then combine results of local (closed form matting), and nonlocal (KNN matting) matting effectively to achieve higher quality alpha mattes than both of its inputs. Extensive experiments demonstrate that our proposed deep CNN matting produces visually and quantitatively high-quality alpha mattes. In addition, our method has achieved the highest ranking in the public alpha matting evaluation dataset in terms of the sum of absolute differences, mean squared errors, and gradient errors." ] }

{ "cite_N": [ "@cite_2" ], "mid": [ "2604469346" ], "abstract": [ "Image matting is a fundamental computer vision problem and has many applications. Previous algorithms have poor performance when an image has similar foreground and background colors or complicated textures. The main reasons are prior methods 1) only use low-level features and 2) lack high-level context. In this paper, we propose a novel deep learning based algorithm that can tackle both these problems. Our deep model has two parts. The first part is a deep convolutional encoder-decoder network that takes an image and the corresponding trimap as inputs and predict the alpha matte of the image. The second part is a small convolutional network that refines the alpha matte predictions of the first network to have more accurate alpha values and sharper edges. In addition, we also create a large-scale image matting dataset including 49300 training images and 1000 testing images. We evaluate our algorithm on the image matting benchmark, our testing set, and a wide variety of real images. Experimental results clearly demonstrate the superiority of our algorithm over previous methods." ] }

{ "cite_N": [ "@cite_30", "@cite_35", "@cite_33", "@cite_3", "@cite_0", "@cite_23", "@cite_13" ], "mid": [ "1560993323", "2888452402", "2913618394", "2964176678", "", "", "1935847907" ], "abstract": [ "The classical Faber-Krahn inequality asserts that balls (uniquely) minimize the first eigenvalue of the Dirichlet-Laplacian among sets with given volume. In this paper we prove a sharp quantitative enhancement of this result, thus confirming a conjecture by Nadirashvili and Bhattacharya-Weitsman. More generally, the result applies to every optimal Poincare-Sobolev constant for the embeddings @math .", "A version of the Riesz-Sobolev convolution inequality is formulated and proved for arbitrary compact connected Abelian groups. Maximizers are characterized and a quantitative stability theorem is proved, under natural hypotheses. A corresponding stability theorem for sets whose sumset has nearly minimal measure is also proved, sharpening recent results of other authors. For the special case of the group @math , a continuous deformation of sets is developed, under which an appropriately scaled Riesz-Sobolev functional is shown to be nondecreasing.", "In this note, we establish a strong form of the quantitive Sobolev inequality in Euclidean space for @math . Given any function @math , the gap in the Sobolev inequality controls @math , where @math is an extremal function for the Sobolev inequality.", "Abstract We prove a quantitative stability result for the Brunn–Minkowski inequality: if | A | = | B | = 1 , t ∈ [ τ , 1 − τ ] with τ > 0 , and | t A + ( 1 − t ) B | 1 n ≤ 1 + δ for some small δ , then, up to a translation, both A and B are quantitatively close (in terms of δ ) to a convex set K .", "", "", "We present some recent stability results concerning the isoperimetric inequality and other related geometric and functional inequalities. The main techniques and approaches to this field are discussed." ] }

{ "cite_N": [ "@cite_41", "@cite_4" ], "mid": [ "2963747906", "2075584439" ], "abstract": [ "By using optimal mass transportation and a quantitative Holder inequality, we provide estimates for the Borell–Brascamp–Lieb deficit on complete Riemannian manifolds. Accordingly, equality cases in Borell–Brascamp–Lieb inequalities (including Brunn–Minkowski and Prekopa–Leindler inequalities) are characterized in terms of the optimal transport map between suitable marginal probability measures. These results provide several qualitative applications both in the flat and non-flat frameworks. In particular, by using Caffarelli's regularity result for the Monge–Ampere equation, we give a new proof of Dubuc's characterization of the equality in Borell–Brascamp–Lieb inequalities in the Euclidean setting. When the n-dimensional Riemannian manifold has Ricci curvature Ric(M) ≥ (n-1)k for some k ⋲ ℝ, it turns out that equality in the Borell–Brascamp–Lieb inequality is expected only when a particular region of the manifold between the marginal supports has constant sectional curvature k. A precise characterization is provided for the equality in the Lott–Sturm–Villani-type distorted Brunn–Minkowski inequality on Riemannian manifolds. Related results for (not necessarily reversible) Finsler manifolds are also presented.", "For convex bodies D in Rn the deviation d from spherical shape is estimated from above in terms of the (dimensionless) isoperimetric deficiency A of D as follows: d < f(A) (for A sufficiently small). Here f is an explicit elementary function vanishing continuously at 0. The estimate is sharp as regards the order of magnitude of f . The dimensions n = 2 and 3 present anomalies as to the form of f . In the planar case n = 2 the result is contained in an inequality due to T. Bonnesen. A qualitative consequence of the present result is that there is stability in the classical isoperimetric problem for convex bodies D in Rn in the sense that, as D varies, d -p 0 for A -A 0. The proof of the estimate d < f(A) is based on a related estimate in the case of domains (not necessarily convex) that are supposed a priori to be nearly spherical in a certain sense." ] }

{ "cite_N": [ "@cite_36", "@cite_53", "@cite_34", "@cite_50" ], "mid": [ "2140849606", "2000042664", "2027963417", "1493228775" ], "abstract": [ "Distributions following a power-law are an ubiquitous phenomenon. Methods for determining the exponent of a power-law tail by graphical means are often used in practice but are intrinsically unreliable. Maximum likelihood estimators for the exponent are a mathematically sound alternative to graphical methods.", "Power-law distributions occur in many situations of scientific interest and have significant consequences for our understanding of natural and man-made phenomena. Unfortunately, the detection and characterization of power laws is complicated by the large fluctuations that occur in the tail of the distribution—the part of the distribution representing large but rare events—and by the difficulty of identifying the range over which power-law behavior holds. Commonly used methods for analyzing power-law data, such as least-squares fitting, can produce substantially inaccurate estimates of parameters for power-law distributions, and even in cases where such methods return accurate answers they are still unsatisfactory because they give no indication of whether the data obey a power law at all. Here we present a principled statistical framework for discerning and quantifying power-law behavior in empirical data. Our approach combines maximum-likelihood fitting methods with goodness-of-fit tests based on the Kolmogorov-Smirnov (KS) statistic and likelihood ratios. We evaluate the effectiveness of the approach with tests on synthetic data and give critical comparisons to previous approaches. We also apply the proposed methods to twenty-four real-world data sets from a range of different disciplines, each of which has been conjectured to follow a power-law distribution. In some cases we find these conjectures to be consistent with the data, while in others the power law is ruled out.", "This short communication uses a simple experiment to show that fitting to a power law distribution by using graphical methods based on linear fit on the log-log scale is biased and inaccurate. It shows that using maximum likelihood estimation (MLE) is far more robust. Finally, it presents a new table for performing the Kolmogorov-Smirnov test for goodness-of-fit tailored to power-law distributions in which the power-law exponent is estimated using MLE. The techniques presented here will advance the application of complex network theory by allowing reliable estimation of power-law models from data and further allowing quantitative assessment of goodness-of-fit of proposed power-law models to empirical data.", "Many complex networks in natural and social phenomena have often been characterized by heavy-tailed degree distributions. However, due to rapidly growing size of network data and concerns on privacy issues about using these data, it becomes more difficult to analyze complete data sets. Thus, it is crucial to devise effective and efficient estimation methods for heavy tails of degree distributions in large-scale networks only using local information of a small fraction of sampled nodes. Here we propose a tail-scope method based on local observational bias of the friendship paradox. We show that the tail-scope method outperforms the uniform node sampling for estimating heavy tails of degree distributions, while the opposite tendency is observed in the range of small degrees. In order to take advantages of both sampling methods, we devise the hybrid method that successfully recovers the whole range of degree distributions. Our tail-scope method shows how structural heterogeneities of large-scale complex networks can be used to effectively reveal the network structure only with limited local information." ] }

{ "cite_N": [ "@cite_9", "@cite_15", "@cite_18", "@cite_8" ], "mid": [ "2869375357", "2963647876", "2896832493", "2963914175" ], "abstract": [ "We present research using the latest reinforcement learning algorithm for end-to-end driving without any mediated perception (object recognition, scene understanding). The newly proposed reward and learning strategies lead together to faster convergence and more robust driving using only RGB image from a forward facing camera. An Asynchronous Actor Critic (A3C) framework is used to learn the car control in a physically and graphically realistic rally game, with the agents evolving simultaneously on tracks with a variety of road structures (turns, hills), graphics (seasons, location) and physics (road adherence). A thorough evaluation is conducted and generalization is proven on unseen tracks and using legal speed limits. Open loop tests on real sequences of images show some domain adaption capability of our method.", "Detailed environment perception is a crucial component of automated vehicles. However, to deal with the amount of perceived information, we also require segmentation strategies. Based on a grid map environment representation, well-suited for sensor fusion, free-space estimation and machine learning, we detect and classify objects using deep convolutional neural networks. As input for our networks we use a multi-layer grid map efficiently encoding 3D range sensor information. The inference output consists of a list of rotated bounding boxes with associated semantic classes. We conduct extensive ablation studies, highlight important design considerations when using grid maps and evaluate our models on the KITTI Bird's Eye View benchmark. Qualitative and quantitative benchmark results show that we achieve robust detection and state of the art accuracy solely using top-view grid maps from range sensor data.", "This paper explores the capability of deep neural networks to capture key characteristics of vehicle dynamics, and their ability to perform coupled longitudinal and lateral control of a vehicle. To this extent, two different artificial neural networks are trained to compute vehicle controls corresponding to a reference trajectory, using a dataset based on high-fidelity simulations of vehicle dynamics. In this study, control inputs are chosen as the steering angle of the front wheels, and the applied torque on each wheel. The performance of both models, namely a Multi-Layer Perceptron (MLP) and a Convolutional Neural Network (CNN), is evaluated based on their ability to drive the vehicle on a challenging test track, shifting between long straight lines and tight curves. A comparison to conventional decoupled controllers on the same track is also provided.", "In order to drive safely and efficiently on public roads, autonomous vehicles will have to understand the intentions of surrounding vehicles, and adapt their own behavior accordingly. If experienced human drivers are generally good at inferring other vehicles' motion up to a few seconds in the future, most current Advanced Driving Assistance Systems (ADAS) are unable to perform such medium-term forecasts, and are usually limited to high-likelihood situations such as emergency braking. In this article, we present a first step towards consistent trajectory prediction by introducing a long short-term memory (LSTM) neural network, which is capable of accurately predicting future longitudinal and lateral trajectories for vehicles on highway. Unlike previous work focusing on a low number of trajectories collected from a few drivers, our network was trained and validated on the NGSIM US-101 dataset, which contains a total of 800 hours of recorded trajectories in various traffic densities, representing more than 6000 individual drivers." ] }

{ "cite_N": [ "@cite_14", "@cite_11", "@cite_2", "@cite_13", "@cite_17" ], "mid": [ "2598706937", "2964314455", "1612997784", "2200124539", "1970504153" ], "abstract": [ "This paper studies monocular visual odometry (VO) problem. Most of existing VO algorithms are developed under a standard pipeline including feature extraction, feature matching, motion estimation, local optimisation, etc. Although some of them have demonstrated superior performance, they usually need to be carefully designed and specifically fine-tuned to work well in different environments. Some prior knowledge is also required to recover an absolute scale for monocular VO. This paper presents a novel end-to-end framework for monocular VO by using deep Recurrent Convolutional Neural Networks (RCNNs). Since it is trained and deployed in an end-to-end manner, it infers poses directly from a sequence of raw RGB images (videos) without adopting any module in the conventional VO pipeline. Based on the RCNNs, it not only automatically learns effective feature representation for the VO problem through Convolutional Neural Networks, but also implicitly models sequential dynamics and relations using deep Recurrent Neural Networks. Extensive experiments on the KITTI VO dataset show competitive performance to state-of-the-art methods, verifying that the end-to-end Deep Learning technique can be a viable complement to the traditional VO systems.", "We propose a novel monocular visual odometry (VO) system called UnDeepVO in this paper. UnDeepVO is able to estimate the 6-DoF pose of a monocular camera and the depth of its view by using deep neural networks. There are two salient features of the proposed UnDeepVo:one is the unsupervised deep learning scheme, and the other is the absolute scale recovery. Specifically, we train UnDeepVoby using stereo image pairs to recover the scale but test it by using consecutive monocular images. Thus, UnDeepVO is a monocular system. The loss function defined for training the networks is based on spatial and temporal dense information. A system overview is shown in Fig. 1. The experiments on KITTI dataset show our UnDeepVO achieves good performance in terms of pose accuracy.", "This paper presents ORB-SLAM, a feature-based monocular simultaneous localization and mapping (SLAM) system that operates in real time, in small and large indoor and outdoor environments. The system is robust to severe motion clutter, allows wide baseline loop closing and relocalization, and includes full automatic initialization. Building on excellent algorithms of recent years, we designed from scratch a novel system that uses the same features for all SLAM tasks: tracking, mapping, relocalization, and loop closing. A survival of the fittest strategy that selects the points and keyframes of the reconstruction leads to excellent robustness and generates a compact and trackable map that only grows if the scene content changes, allowing lifelong operation. We present an exhaustive evaluation in 27 sequences from the most popular datasets. ORB-SLAM achieves unprecedented performance with respect to other state-of-the-art monocular SLAM approaches. For the benefit of the community, we make the source code public.", "We present a robust and real-time monocular six degree of freedom relocalization system. Our system trains a convolutional neural network to regress the 6-DOF camera pose from a single RGB image in an end-to-end manner with no need of additional engineering or graph optimisation. The algorithm can operate indoors and outdoors in real time, taking 5ms per frame to compute. It obtains approximately 2m and 3 degrees accuracy for large scale outdoor scenes and 0.5m and 5 degrees accuracy indoors. This is achieved using an efficient 23 layer deep convnet, demonstrating that convnets can be used to solve complicated out of image plane regression problems. This was made possible by leveraging transfer learning from large scale classification data. We show that the PoseNet localizes from high level features and is robust to difficult lighting, motion blur and different camera intrinsics where point based SIFT registration fails. Furthermore we show how the pose feature that is produced generalizes to other scenes allowing us to regress pose with only a few dozen training examples.", "We propose a semi-direct monocular visual odometry algorithm that is precise, robust, and faster than current state-of-the-art methods. The semi-direct approach eliminates the need of costly feature extraction and robust matching techniques for motion estimation. Our algorithm operates directly on pixel intensities, which results in subpixel precision at high frame-rates. A probabilistic mapping method that explicitly models outlier measurements is used to estimate 3D points, which results in fewer outliers and more reliable points. Precise and high frame-rate motion estimation brings increased robustness in scenes of little, repetitive, and high-frequency texture. The algorithm is applied to micro-aerial-vehicle state-estimation in GPS-denied environments and runs at 55 frames per second on the onboard embedded computer and at more than 300 frames per second on a consumer laptop. We call our approach SVO (Semi-direct Visual Odometry) and release our implementation as open-source software." ] }

{ "cite_N": [ "@cite_16", "@cite_12" ], "mid": [ "2083624955", "2296228853" ], "abstract": [ "This paper describes a general purpose, representation independent method for the accurate and computationally efficient registration of 3-D shapes including free-form curves and surfaces. The method handles the full six-degrees of freedom and is based on the iterative closest point (ICP) algorithm, which requires only a procedure to find the closest point on a geometric entity to a given point. The ICP algorithm always converges monotonically to the nearest local minimum of a mean-square distance metric, and experience shows that the rate of convergence is rapid during the first few iterations. Therefore, given an adequate set of initial rotations and translations for a particular class of objects with a certain level of 'shape complexity', one can globally minimize the mean-square distance metric over all six degrees of freedom by testing each initial registration. For examples, a given 'model' shape and a sensed 'data' shape that represents a major portion of the model shape can be registered in minutes by testing one initial translation and a relatively small set of rotations to allow for the given level of model complexity. One important application of this method is to register sensed data from unfixtured rigid objects with an ideal geometric model prior to shape inspection. The described method is also useful for deciding fundamental issues such as the congruence (shape equivalence) of different geometric representations as well as for estimating the motion between point sets where the correspondences are not known. Experimental results show the capabilities of the registration algorithm on point sets, curves, and surfaces.", "We propose a real-time method for odometry and mapping using range measurements from a 2-axis lidar moving in 6-DOF. The problem is hard because the range measurements are received at different times, and errors in motion estimation can cause mis-registration of the resulting point cloud. To date, coherent 3D maps can be built by off-line batch methods, often using loop closure to correct for drift over time. Our method achieves both low-drift and low-computational complexity without the need for high accuracy ranging or inertial measurements. The key idea in obtaining this level of performance is the division of the complex problem of simultaneous localization and mapping, which seeks to optimize a large number of variables simultaneously, by two algorithms. One algorithm performs odometry at a high frequency but low fidelity to estimate velocity of the lidar. Another algorithm runs at a frequency of an order of magnitude lower for fine matching and registration of the point cloud. Combination of the two algorithms allows the method to map in real-time. The method has been evaluated by a large set of experiments as well as on the KITTI odometry benchmark. The results indicate that the method can achieve accuracy at the level of state of the art offline batch methods." ] }

{ "cite_N": [ "@cite_21", "@cite_10", "@cite_12" ], "mid": [ "2774351931", "", "2296228853" ], "abstract": [ "Although 2D LiDAR based Simultaneous Localization and Mapping (SLAM) is a relatively mature topic nowadays, the loop closure problem remains challenging due to the lack of distinctive features in 2D LiDAR range scans. Existing research can be roughly divided into correlation based approaches e.g. scan-to-submap matching and feature based methods e.g. bag-of-words (BoW). In this paper, we solve loop closure detection and relative pose transformation using 2D LiDAR within an end-to-end Deep Learning framework. The algorithm is verified with simulation data and on an Unmanned Aerial Vehicle (UAV) flying in indoor environment. The loop detection ConvNet alone achieves an accuracy of 98.2 in loop closure detection. With a verification step using the scan matching ConvNet, the false positive rate drops to around 0.001 . The proposed approach processes 6000 pairs of raw LiDAR scans per second on a Nvidia GTX1080 GPU.", "", "We propose a real-time method for odometry and mapping using range measurements from a 2-axis lidar moving in 6-DOF. The problem is hard because the range measurements are received at different times, and errors in motion estimation can cause mis-registration of the resulting point cloud. To date, coherent 3D maps can be built by off-line batch methods, often using loop closure to correct for drift over time. Our method achieves both low-drift and low-computational complexity without the need for high accuracy ranging or inertial measurements. The key idea in obtaining this level of performance is the division of the complex problem of simultaneous localization and mapping, which seeks to optimize a large number of variables simultaneously, by two algorithms. One algorithm performs odometry at a high frequency but low fidelity to estimate velocity of the lidar. Another algorithm runs at a frequency of an order of magnitude lower for fine matching and registration of the point cloud. Combination of the two algorithms allows the method to map in real-time. The method has been evaluated by a large set of experiments as well as on the KITTI odometry benchmark. The results indicate that the method can achieve accuracy at the level of state of the art offline batch methods." ] }

{ "cite_N": [ "@cite_5" ], "mid": [ "2932490017" ], "abstract": [ "The use of 2D laser scanners is attractive for the autonomous driving industry because of its accuracy, light-weight and low-cost. However, since only a 2D slice of the surrounding environment is detected at each scan, it is a challenge to execute important tasks such as the localization of the vehicle. In this paper we present a novel framework that explores the use of deep Recurrent Convolutional Neural Networks (RCNN) for odometry estimation using only 2D laser scanners. The application of RCNNs provides the tools to not only extract the features of the laser scanner data using Convolutional Neural Networks (CNNs), but in addition it models the possible connections among consecutive scans using the Long Short-Term Memory (LSTM) Recurrent Neural Network. Results on a real road dataset show that the method can run in real-time without using GPU acceleration and have competitive performance compared to other methods, being an interesting approach that could complement traditional localization systems." ] }

{ "cite_N": [ "@cite_22" ], "mid": [ "2150066425" ], "abstract": [ "Today, visual recognition systems are still rarely employed in robotics applications. Perhaps one of the main reasons for this is the lack of demanding benchmarks that mimic such scenarios. In this paper, we take advantage of our autonomous driving platform to develop novel challenging benchmarks for the tasks of stereo, optical flow, visual odometry SLAM and 3D object detection. Our recording platform is equipped with four high resolution video cameras, a Velodyne laser scanner and a state-of-the-art localization system. Our benchmarks comprise 389 stereo and optical flow image pairs, stereo visual odometry sequences of 39.2 km length, and more than 200k 3D object annotations captured in cluttered scenarios (up to 15 cars and 30 pedestrians are visible per image). Results from state-of-the-art algorithms reveal that methods ranking high on established datasets such as Middlebury perform below average when being moved outside the laboratory to the real world. Our goal is to reduce this bias by providing challenging benchmarks with novel difficulties to the computer vision community. Our benchmarks are available online at: www.cvlibs.net datasets kitti" ] }

{ "cite_N": [ "@cite_15" ], "mid": [ "2890103577" ], "abstract": [ "Payment channels are the most prominent solution to the blockchain scalability problem. We introduce the problem of network design with fees for payment channels from the perspective of a Payment Service Provider (PSP). Given a set of transactions, we examine the optimal graph structure and fee assignment to maximize the PSP’s profit. A customer prefers to route transactions through the PSP’s network if the cheapest path from sender to receiver is financially interesting, i.e., if the path costs less than the blockchain fee. When the graph structure is a tree, and the PSP facilitates all transactions, the problem can be formulated as a linear program. For a path graph, we present a polynomial time algorithm to assign optimal fees. We also show that the star network, where the center is an additional node acting as an intermediary, is a near-optimal solution to the network design problem." ] }

{ "cite_N": [ "@cite_35", "@cite_18", "@cite_37", "@cite_38", "@cite_7", "@cite_28", "@cite_9", "@cite_21", "@cite_2", "@cite_5", "@cite_10" ], "mid": [ "2951940669", "2573098616", "", "", "2778680124", "2562703451", "2333544554", "2545173102", "2797515701", "2483862638", "" ], "abstract": [ "Markerless motion capture algorithms require a 3D body with properly personalized skeleton dimension and or body shape and appearance to successfully track a person. Unfortunately, many tracking methods consider model personalization a different problem and use manual or semi-automatic model initialization, which greatly reduces applicability. In this paper, we propose a fully automatic algorithm that jointly creates a rigged actor model commonly used for animation - skeleton, volumetric shape, appearance, and optionally a body surface - and estimates the actor's motion from multi-view video input only. The approach is rigorously designed to work on footage of general outdoor scenes recorded with very few cameras and without background subtraction. Our method uses a new image formation model with analytic visibility and analytically differentiable alignment energy. For reconstruction, 3D body shape is approximated as Gaussian density field. For pose and shape estimation, we minimize a new edge-based alignment energy inspired by volume raycasting in an absorbing medium. We further propose a new statistical human body model that represents the body surface, volumetric Gaussian density, as well as variability in skeleton shape. Given any multi-view sequence, our method jointly optimizes the pose and shape parameters of this model fully automatically in a spatiotemporal way.", "3D models provide a common ground for different representations of human bodies. In turn, robust 2D estimation has proven to be a powerful tool to obtain 3D fits in-the-wild. However, depending on the level of detail, it can be hard to impossible to acquire labeled data for training 2D estimators on large scale. We propose a hybrid approach to this problem: with an extended version of the recently introduced SMPLify method, we obtain high quality 3D body model fits for multiple human pose datasets. Human annotators solely sort good and bad fits. This procedure leads to an initial dataset, UP-3D, with rich annotations. With a comprehensive set of experiments, we show how this data can be used to train discriminative models that produce results with an unprecedented level of detail: our models predict 31 segments and 91 landmark locations on the body. Using the 91 landmark pose estimator, we present state-of-the art results for 3D human pose and shape estimation using an order of magnitude less training data and without assumptions about gender or pose in the fitting procedure. We show that UP-3D can be enhanced with these improved fits to grow in quantity and quality, which makes the system deployable on large scale. The data, code and models are available for research purposes.", "", "", "We describe Human Mesh Recovery (HMR), an end-to-end framework for reconstructing a full 3D mesh of a human body from a single RGB image. In contrast to most current methods that compute 2D or 3D joint locations, we produce a richer and more useful mesh representation that is parameterized by shape and 3D joint angles. The main objective is to minimize the reprojection loss of keypoints, which allow our model to be trained using in-the-wild images that only have ground truth 2D annotations. However, reprojection loss alone is highly under constrained. In this work we address this problem by introducing an adversary trained to tell whether a human body parameter is real or not using a large database of 3D human meshes. We show that HMR can be trained with and without using any coupled 2D-to-3D supervision. We do not rely on intermediate 2D keypoint detection and infer 3D pose and shape parameters directly from image pixels. Our model runs in real-time given a bounding box containing the person. We demonstrate our approach on various images in-the-wild and out-perform previous optimizationbased methods that output 3D meshes and show competitive results on tasks such as 3D joint location estimation and part segmentation.", "We represent human body shape estimation from binary silhouettes or shaded images as a regression problem, and describe a novel method to tackle it using CNNs. Utilizing a parametric body model, we train CNNs to learn a global mapping from the input to shape parameters used to reconstruct the shapes of people, in neutral poses, with the application of garment fitting in mind. This results in an accurate, robust and automatic system, orders of magnitude faster than methods we compare to, enabling interactive applications. In addition, we show how to combine silhouettes from two views to improve prediction over a single view. The method is extensively evaluated on thousands of synthetic shapes and real data and compared to state of-art approaches, clearly outperforming methods based on global fitting and strongly competing with more expensive local fitting based ones.", "In this work, we present an approach to fuse video with sparse orientation data obtained from inertial sensors to improve and stabilize full-body human motion capture. Even though video data is a strong cue for motion analysis, tracking artifacts occur frequently due to ambiguities in the images, rapid motions, occlusions or noise. As a complementary data source, inertial sensors allow for accurate estimation of limb orientations even under fast motions. However, accurate position information cannot be obtained in continuous operation. Therefore, we propose a hybrid tracker that combines video with a small number of inertial units to compensate for the drawbacks of each sensor type: on the one hand, we obtain drift-free and accurate position information from video data and, on the other hand, we obtain accurate limb orientations and good performance under fast motions from inertial sensors. In several experiments we demonstrate the increased performance and stability of our human motion tracker.", "We describe a solution to the challenging problem of estimating human body shape from a single photograph or painting. Our approach computes shape and pose parameters of a 3D human body model directly from monocular image cues and advances the state of the art in several directions. First, given a user-supplied estimate of the subject's height and a few clicked points on the body we estimate an initial 3D articulated body pose and shape. Second, using this initial guess we generate a tri-map of regions inside, outside and on the boundary of the human, which is used to segment the image using graph cuts. Third, we learn a low-dimensional linear model of human shape in which variations due to height are concentrated along a single dimension, enabling height-constrained estimation of body shape. Fourth, we formulate the problem of parametric human shape from shading. We estimate the body pose, shape and reflectance as well as the scene lighting that produces a synthesized body that robustly matches the image evidence. Quantitative experiments demonstrate how smooth shading provides powerful constraints on human shape. We further demonstrate a novel application in which we extract 3D human models from archival photographs and paintings.", "Human shape estimation is an important task for video editing , animation and fashion industry. Predicting 3D human body shape from natural images, however, is highly challenging due to factors such as variation in human bodies, clothing and viewpoint. Prior methods addressing this problem typically attempt to fit parametric body models with certain priors on pose and shape. In this work we argue for an alternative representation and propose BodyNet, a neural network for direct inference of volumetric body shape from a single image. BodyNet is an end-to-end trainable network that benefits from (i) a volumetric 3D loss, (ii) a multi-view re-projection loss, and (iii) intermediate supervision of 2D pose, 2D body part segmentation, and 3D pose. Each of them results in performance improvement as demonstrated by our experiments. To evaluate the method, we fit the SMPL model to our network output and show state-of-the-art results on the SURREAL and Unite the People datasets, outperforming recent approaches. Besides achieving state-of-the-art performance, our method also enables volumetric body-part segmentation.", "We describe the first method to automatically estimate the 3D pose of the human body as well as its 3D shape from a single unconstrained image. We estimate a full 3D mesh and show that 2D joints alone carry a surprising amount of information about body shape. The problem is challenging because of the complexity of the human body, articulation, occlusion, clothing, lighting, and the inherent ambiguity in inferring 3D from 2D. To solve this, we first use a recently published CNN-based method, DeepCut, to predict (bottom-up) the 2D body joint locations. We then fit (top-down) a recently published statistical body shape model, called SMPL, to the 2D joints. We do so by minimizing an objective function that penalizes the error between the projected 3D model joints and detected 2D joints. Because SMPL captures correlations in human shape across the population, we are able to robustly fit it to very little data. We further leverage the 3D model to prevent solutions that cause interpenetration. We evaluate our method, SMPLify, on the Leeds Sports, HumanEva, and Human3.6M datasets, showing superior pose accuracy with respect to the state of the art.", "" ] }

{ "cite_N": [ "@cite_18", "@cite_14", "@cite_42", "@cite_6", "@cite_39", "@cite_44", "@cite_45" ], "mid": [ "2573098616", "2099333815", "2895748257", "2888934629", "2605947573", "2101032778", "" ], "abstract": [ "3D models provide a common ground for different representations of human bodies. In turn, robust 2D estimation has proven to be a powerful tool to obtain 3D fits in-the-wild. However, depending on the level of detail, it can be hard to impossible to acquire labeled data for training 2D estimators on large scale. We propose a hybrid approach to this problem: with an extended version of the recently introduced SMPLify method, we obtain high quality 3D body model fits for multiple human pose datasets. Human annotators solely sort good and bad fits. This procedure leads to an initial dataset, UP-3D, with rich annotations. With a comprehensive set of experiments, we show how this data can be used to train discriminative models that produce results with an unprecedented level of detail: our models predict 31 segments and 91 landmark locations on the body. Using the 91 landmark pose estimator, we present state-of-the art results for 3D human pose and shape estimation using an order of magnitude less training data and without assumptions about gender or pose in the fitting procedure. We show that UP-3D can be enhanced with these improved fits to grow in quantity and quality, which makes the system deployable on large scale. The data, code and models are available for research purposes.", "While research on articulated human motion and pose estimation has progressed rapidly in the last few years, there has been no systematic quantitative evaluation of competing methods to establish the current state of the art. We present data obtained using a hardware system that is able to capture synchronized video and ground-truth 3D motion. The resulting HumanEva datasets contain multiple subjects performing a set of predefined actions with a number of repetitions. On the order of 40,000 frames of synchronized motion capture and multi-view video (resulting in over one quarter million image frames in total) were collected at 60 Hz with an additional 37,000 time instants of pure motion capture data. A standard set of error measures is defined for evaluating both 2D and 3D pose estimation and tracking algorithms. We also describe a baseline algorithm for 3D articulated tracking that uses a relatively standard Bayesian framework with optimization in the form of Sequential Importance Resampling and Annealed Particle Filtering. In the context of this baseline algorithm we explore a variety of likelihood functions, prior models of human motion and the effects of algorithm parameters. Our experiments suggest that image observation models and motion priors play important roles in performance, and that in a multi-view laboratory environment, where initialization is available, Bayesian filtering tends to perform well. The datasets and the software are made available to the research community. This infrastructure will support the development of new articulated motion and pose estimation algorithms, will provide a baseline for the evaluation and comparison of new methods, and will help establish the current state of the art in human pose estimation and tracking.", "In this work, we propose a method that combines a single hand-held camera and a set of Inertial Measurement Units (IMUs) attached at the body limbs to estimate accurate 3D poses in the wild. This poses many new challenges: the moving camera, heading drift, cluttered background, occlusions and many people visible in the video. We associate 2D pose detections in each image to the corresponding IMU-equipped persons by solving a novel graph based optimization problem that forces 3D to 2D coherency within a frame and across long range frames. Given associations, we jointly optimize the pose of a statistical body model, the camera pose and heading drift using a continuous optimization framework. We validated our method on the TotalCapture dataset, which provides video and IMU synchronized with ground truth. We obtain an accuracy of 26 mm, which makes it accurate enough to serve as a benchmark for image-based 3D pose estimation in the wild. Using our method, we recorded 3D Poses in the Wild (3DPW), a new dataset consisting of more than 51, 000 frames with accurate 3D pose in challenging sequences, including walking in the city, going up-stairs, having coffee or taking the bus. We make the reconstructed 3D poses, video, IMU and 3D models available for research purposes at http: virtualhumans.mpi-inf.mpg.de 3DPW.", "We propose a new single-shot method for multi-person 3D pose estimation in general scenes from a monocular RGB camera. Our approach uses novel occlusion-robust pose-maps (ORPM) which enable full body pose inference even under strong partial occlusions by other people and objects in the scene. ORPM outputs a fixed number of maps which encode the 3D joint locations of all people in the scene. Body part associations [8] allow us to infer 3D pose for an arbitrary number of people without explicit bounding box prediction. To train our approach we introduce MuCo-3DHP, the first large scale training data set showing real images of sophisticated multi-person interactions and occlusions. We synthesize a large corpus of multi-person images by compositing images of individual people (with ground truth from mutli-view performance capture). We evaluate our method on our new challenging 3D annotated multi-person test set MuPoTs-3D where we achieve state-of-the-art performance. To further stimulate research in multi-person 3D pose estimation, we will make our new datasets, and associated code publicly available for research purposes.", "We propose an end-to-end architecture for joint 2D and 3D human pose estimation in natural images. Key to our approach is the generation and scoring of a number of pose proposals per image, which allows us to predict 2D and 3D pose of multiple people simultaneously. Hence, our approach does not require an approximate localization of the humans for initialization. Our architecture, named LCR-Net, contains 3 main components: 1) the pose proposal generator that suggests potential poses at different locations in the image, 2) a classifier that scores the different pose proposals, and 3) a regressor that refines pose proposals both in 2D and 3D. All three stages share the convolutional feature layers and are trained jointly. The final pose estimation is obtained by integrating over neighboring pose hypotheses, which is shown to improve over a standard non maximum suppression algorithm. Our approach significantly outperforms the state of the art in 3D pose estimation on Human3.6M, a controlled environment. Moreover, it shows promising results on real images for both single and multi-person subsets of the MPII 2D pose benchmark.", "We introduce a new dataset, Human3.6M, of 3.6 Million accurate 3D Human poses, acquired by recording the performance of 5 female and 6 male subjects, under 4 different viewpoints, for training realistic human sensing systems and for evaluating the next generation of human pose estimation models and algorithms. Besides increasing the size of the datasets in the current state-of-the-art by several orders of magnitude, we also aim to complement such datasets with a diverse set of motions and poses encountered as part of typical human activities (taking photos, talking on the phone, posing, greeting, eating, etc.), with additional synchronized image, human motion capture, and time of flight (depth) data, and with accurate 3D body scans of all the subject actors involved. We also provide controlled mixed reality evaluation scenarios where 3D human models are animated using motion capture and inserted using correct 3D geometry, in complex real environments, viewed with moving cameras, and under occlusion. Finally, we provide a set of large-scale statistical models and detailed evaluation baselines for the dataset illustrating its diversity and the scope for improvement by future work in the research community. Our experiments show that our best large-scale model can leverage our full training set to obtain a 20 improvement in performance compared to a training set of the scale of the largest existing public dataset for this problem. Yet the potential for improvement by leveraging higher capacity, more complex models with our large dataset, is substantially vaster and should stimulate future research. The dataset together with code for the associated large-scale learning models, features, visualization tools, as well as the evaluation server, is available online at http: vision.imar.ro human3.6m .", "" ] }

{ "cite_N": [ "@cite_31" ], "mid": [ "2475195788" ], "abstract": [ "This paper presents the state of the art in the area of topology-based visualization. It describes the process and results of an extensive annotation for generating a definition and terminology for the field. The terminology enabled a typology for topological models which is used to organize research results and the state of the art. Our report discusses relations among topological models and for each model describes research results for the computation, simplification, visualization, and application. The paper identifies themes common to subfields, current frontiers, and unexplored territory in this research area." ] }

{ "cite_N": [ "@cite_37", "@cite_27", "@cite_16", "@cite_20", "@cite_12", "@cite_17" ], "mid": [ "1979184481", "2031993264", "", "", "1607787316", "2001088180" ], "abstract": [ "The heights of energy barriers separating two (macro-)states are useful for estimating transition frequencies. In non-degenerate landscapes the decomposition of a landscape into basins surrounding local minima connected by saddle points is straightforward and yields a useful definition of macro-states. In this work we develop a rigorous concept of barrier trees for degenerate landscapes. We present a program that efficiently computes such barrier trees, and apply it to two well known examples of landscapes.", "Contour trees and Reeb graphs are firmly embedded in scientific visualization for analysing univariate (scalar) fields. We generalize this analysis to multivariate fields with a data structure called the Joint Contour Net that quantizes the variation of multiple variables simultaneously. We report the first algorithm for constructing the Joint Contour Net and demonstrate that Contour Trees for individual variables can be extracted from the Joint Contour Net.", "", "", "We present a computational method for extracting simple descriptions of high dimensional data sets in the form of simplicial complexes. Our method, called Mapper, is based on the idea of partial clustering of the data guided by a set of functions defined on the data. The proposed method is not dependent on any particular clustering algorithm, i.e. any clustering algorithm may be used with Mapper. We implement this method and present a few sample applications in which simple descriptions of the data present important information about its structure.", "We show that contour trees can be computed in all dimensions by a simple algorithm that merges two trees. Our algorithm extends, simplifies, and improves work of Tarasov and Vyalyi and of van" ] }

{ "cite_N": [ "@cite_8", "@cite_60", "@cite_24", "@cite_43", "@cite_79", "@cite_59", "@cite_71", "@cite_17" ], "mid": [ "2083586903", "2135609792", "2070784608", "2160747282", "", "2011658854", "1584564047", "2001088180" ], "abstract": [ "Topological volume skeletonization is a novel approach for automating transfer function design in visualization by extracting the topological structure of a volume dataset. The skeletonization process yields a graph called a volume skeleton tree, which consists of volumetric critical points and their connectivity. The resultant graph provides critical field values whose color and opacity are accentuated in the design of transfer functions for direct volume rendering. Visually pleasing results of volume visualization demonstrate the feasibility of the present approach.", "For 2D or 3D meshes that represent the domain of continuous function to the reals, the contours|or isosurfaces|of a speci ed value are an important way to visualize the function. To nd such contours, a seed set can be used for the starting points from which the traversal of the contours can begin. This paper gives the rst methods to obtain seed sets that are provably small in size. They are based on a variant of the contour tree (or topographic change tree). We give a new, simple algorithm to compute such a tree in regular and irregular meshes that requires O(n logn) time in 2D for meshes with n elements, and in O(n) time in higher dimensions. The additional storage overhead is proportial to the maximum size of any contour (linear in the worst case, but typically less). Given the contour tree, a minimum size seed set can be computed in roughly quadratic time. Since in practice this can be excessive, we develop a simple approximation algorithm giving a seed set of size at most twice the size of the minimum. It requires O(n log n) time and linear storage once the contour tree is known. We also give experimental results, showing the size of the seed sets for several data sets.", "Scientific visualization and illustration tools are designed to help people understand the structure and complexity of scientific data with images that are as informative and intuitive as possible. In this context the use of metaphors plays an important role since they make complex information easily accessible by using commonly known concepts. In this paper we propose a new metaphor, called \"topological landscapes,\" which facilitates understanding the topological structure of scalar functions. The basic idea is to construct a terrain with the same topology as a given dataset and to display the terrain as an easily understood representation of the actual input data. In this projection from an n-dimensional scalar function to a two-dimensional (2D) model we preserve function values of critical points, the persistence (function span) of topological features, and one possible additional metric property (in our examples volume). By displaying this topologically equivalent landscape together with the original data we harness the natural human proficiency in understanding terrain topography and make complex topological information easily accessible.", "This paper introduces two efficient algorithms that compute the Contour Tree of a 3D scalar field F and its augmented version with the Betti numbers of each isosurface. The Contour Tree is a fundamental data structure in scientific visualization that is used to preprocess the domain mesh to allow optimal computation of isosurfaces with minimal overhead storage. The Contour Tree can also be used to build user interfaces reporting the complete topological characterization of a scalar field, as shown in Figure 1.The first part of the paper presents a new scheme that augments the Contour Tree with the Betti numbers of each isocontour in linear time. We show how to extend the scheme introduced in [3] with the Betti number computation without increasing its complexity. Thus, we improve on the time complexity from our previous approach [10] from O(m log m) to O(n log n + m), where m is the number of tetrahedra and n is the number of vertices in the domain of F.The second part of the paper introduces a new divide-and-conquer algorithm that computes the Augmented Contour Tree with improved efficiency. The central part of the scheme computes the output Contour Tree by merging two intermediate Contour Trees and is independent of the interpolant. In this way we confine any knowledge regarding a specific interpolant to an oracle that computes the tree for a single cell. We have implemented this oracle for the trilinear interpolant and plan to replace it with higher order interpolants when needed. The complexity of the scheme is O(n + t log n), where t is the number of critical points of F. For the first time we can compute the Contour Tree in linear time in many practical cases when t = O(n1 - e).Lastly, we report the running times for a parallel implementation of our algorithm, showing good scalability with the number of processors.", "", "We introduce the contour spectrllm, a user interface component that improves qualitative user interaction and provides real-time exad quantification in the visualization of isoconlours. The contour spectrum is a signature consisting of a variety of scalar data and conlour attributes, computed over the range of scalar values wE!R. We explore the use of surface area, volume, and gradient integral of the contour that are shown to be univariate B-spline functions of the scalar value w for multi-dimensional unstructured triangulal' grids. These quantitative propcrties arc calculated in real-time and presented to the user as a collection of signature graphs (plots of functions of w) to assist in selecting relevant isovalues Wo for informative visualization. For timevarying data, these quantitativc properties can also be computed over time, and displaycd using a 2D interface, giving the user an overview of the time-varying function, and allowing interaction in both isovalue and timestep. The effectiveness of the current system and potential extensions are discussed.", "This paper describes an effort to create new visualizations by exploiting hierarchical scalar topology. First, we build a hierarchical topology through synchronously constructing and simplifying Contour Tree (CT) and Morse-Smale (MS) complex of scalar fields. We then introduce three algorithms based on the hierarchical topology: (1) topology-based multi-resolution contouring — an overview provided for a scalar field by extracting iso-values from the simplified CT and tracing approximate contours across the MS complex cells; (2) topology based spaghetti plots for uncertainty — a seeding scheme based on the hierarchical topology for visualizing uncertainty among ensemble scalar data; (3) virtual ribbons — a new scheme for visualizing multivariate data invented by overlapping visual ribbons which encode the scalar variation of a region covered by uniform contours. We compare the new approaches with current alternatives.", "We show that contour trees can be computed in all dimensions by a simple algorithm that merges two trees. Our algorithm extends, simplifies, and improves work of Tarasov and Vyalyi and of van" ] }

{ "cite_N": [ "@cite_55", "@cite_75" ], "mid": [ "1988628849", "1604082823" ], "abstract": [ "Abstract In scalar fields, critical points (points with vanishing derivatives) are important indicators of the topology of iso-contours. When the data values are affected by uncertainty, the locations and types of critical points vary and can no longer be predicted accurately. In this paper, we derive, from a given uncertain scalar ensemble, measures for the likelihood of the occurrence of critical points, with respect to both the positions and types of the critical points. In an ensemble, every instance is a possible occurrence of the phenomenon represented by the scalar values. We show that, by deriving confidence intervals for the gradient and the determinant and trace of the Hessian matrix in scalar ensembles, domain points can be classified according to whether a critical point can occur at a certain location and a specific type of critical point should be expected there. When the data uncertainty can be described stochastically via Gaussian distributed random variables, we show that even probabilistic measures for these events can be deduced.", "This paper introduces a novel, non-local characterization of critical points and their global relation in 2D uncertain scalar fields. The characterization is based on the analysis of the support of the probability density functions (PDF) of the input data. Given two scalar fields representing reliable estimations of the bounds of this support, our strategy identifies mandatory critical points: spatial regions and function ranges where critical points have to occur in any realization of the input. The algorithm provides a global pairing scheme for mandatory critical points which is used to construct mandatory join and split trees. These trees enable a visual exploration of the common topological structure of all possible realizations of the uncertain data. To allow multi-scale visualization, we introduce a simplification scheme for mandatory critical point pairs revealing the most dominant features. Our technique is purely combinatorial and handles parametric distribution models and ensemble data. It does not depend on any computational parameter and does not suffer from numerical inaccuracy or global inconsistency. The algorithm exploits ideas of the established join split tree computation. It is therefore simple to implement, and its complexity is output-sensitive. We illustrate, evaluate, and verify our method on synthetic and real-world data." ] }

{ "cite_N": [ "@cite_38", "@cite_26", "@cite_33", "@cite_41", "@cite_36", "@cite_32", "@cite_63", "@cite_5", "@cite_11" ], "mid": [ "2095233635", "1972641242", "2038628506", "2114084204", "2109657057", "2020226548", "2014256895", "2031619085", "1968578042" ], "abstract": [ "Uncertainty is ubiquitous in science, engineering and medicine. Drawing conclusions from uncertain data is the normal case, not an exception. While the field of statistical graphics is well established, only a few 2D and 3D visualization and feature extraction methods have been devised that consider uncertainty. We present mathematical formulations for uncertain equivalents of isocontours based on standard probability theory and statistics and employ them in interactive visualization methods. As input data, we consider discretized uncertain scalar fields and model these as random fields. To create a continuous representation suitable for visualization we introduce interpolated probability density functions. Furthermore, we introduce numerical condition as a general means in feature-based visualization. The condition number-which potentially diverges in the isocontour problem-describes how errors in the input data are amplified in feature computation. We show how the average numerical condition of isocontours aids the selection of thresholds that correspond to robust isocontours. Additionally, we introduce the isocontour density and the level crossing probability field; these two measures for the spatial distribution of uncertain isocontours are directly based on the probabilistic model of the input data. Finally, we adapt interactive visualization methods to evaluate and display these measures and apply them to 2D and 3D data sets.", "Visualized data often have dubious origins and quality. Different forms of uncertainty and errors are also introduced as the data are derived, transformed, interpolated, and finally rendered. In the absence of integrated presentation of data and uncertainty, the analysis of the visualization is incomplete at best and often leads to inaccurate or incorrect conclusions. This paper surveys techniques for presenting data together with uncertainty. These uncertainty visualization techniques present data in such a manner that users are made aware of the locations and degree of uncertainties in their data so as to make more informed analyses and decisions. The techniques include adding glyphs, adding geometry, modifying geometry, modifying attributes, animation, sonification, and psycho-visual approaches. We present our results in uncertainty visualization for environmental visualization, surface interpolation, global illumination with radiosity, flow visualization, and figure animation. We also present a classification of the possibilities in uncertainty visualization, and locate our contributions within this classification.", "Research into the visualisation of imprecise data is a relatively new field in visualisation. Work is beginning to appear detailing the process of visualising uncertainty in data. Continuing previous work by the author, this paper seeks to extend techniques used to visualise uncertainty from the spatial to the temporal domain, by using visual vibrations to indicate the level of imprecision at a visualised data point. The paper contains an analysis of the present visual features used to indicate imprecision, and then details a methodology for using visual vibrations to display the uncertainty contained in visualised data. Novel additions include addressing chart junk issues outlined by Tufte, additions of perceptual factors and extension to stereo vision applications.", "Efficient and informative visualization of surfaces with uncertainties is an important topic with many applications in science and engineering. In these applications, the correct course of action may depend not only on the location of a boundary, but on the precision with which that location is known. Examples include environmental pollution borderline detection, oil basin edge characterization, or discrimination between cancerous and healthy tissue in medicine. We present a method for producing visualizations of surfaces with uncertainties using points as display primitives. Our approach is to render the surface as a collection of points and to displace each point from its original location along the surface normal by an amount proportional to the uncertainty at that point. This approach can be used in combination with other techniques such as pseudocoloring to produce efficient and revealing visualizations. The basic approach is sufficiently flexible to allow natural extensions; we show incorporation of expressive modulation of opacity, change of the stroke primitive, and addition of an underlying polygonal model. The method is used to visualize real and simulated tumor formations with uncertainty of tumor boundaries. The point-based technique is compared to pseudocoloring for a position estimation task in a preliminary user study.", "Ensembles of numerical simulations are used in a variety of applications, such as meteorology or computational solid mechanics, in order to quantify the uncertainty or possible error in a model or simulation. Deriving robust statistics and visualizing the variability of an ensemble is a challenging task and is usually accomplished through direct visualization of ensemble members or by providing aggregate representations such as an average or pointwise probabilities. In many cases, the interesting quantities in a simulation are not dense fields, but are sets of features that are often represented as thresholds on physical or derived quantities. In this paper, we introduce a generalization of boxplots, called contour boxplots, for visualization and exploration of ensembles of contours or level sets of functions. Conventional boxplots have been widely used as an exploratory or communicative tool for data analysis, and they typically show the median, mean, confidence intervals, and outliers of a population. The proposed contour boxplots are a generalization of functional boxplots, which build on the notion of data depth. Data depth approximates the extent to which a particular sample is centrally located within its density function. This produces a center-outward ordering that gives rise to the statistical quantities that are essential to boxplots. Here we present a generalization of functional data depth to contours and demonstrate methods for displaying the resulting boxplots for two-dimensional simulation data in weather forecasting and computational fluid dynamics.", "Visualizing correlations, i.e., the tendency of uncertain data values at different spatial positions to change contrarily or according to each other, allows inferring on the possible variations of structures in the data. Visualizing global correlation structures, however, is extremely challenging, since it is not clear how the visualization of complicated long-range dependencies can be integrated into standard visualizations of spatial data. Furthermore, storing correlation information imposes a memory requirement that is quadratic in the number of spatial sample positions. This paper presents a novel approach for visualizing both positive and inverse global correlation structures in uncertain 2D scalar fields, where the uncertainty is modeled via a multivariate Gaussian distribution. We introduce a new measure for the degree of dependency of a random variable on its local and global surroundings, and we propose a spatial clustering approach based on this measure to classify regions of a particular correlation strength. The clustering performs a correlation filtering, which results in a representation that is only linear in the number of spatial sample points. Via cluster coloring the correlation information can be embedded into visualizations of other statistical quantities, such as the mean and the standard deviation. We finally propose a hierarchical cluster subdivision scheme to further allow for the simultaneous visualization of local and global correlations. © 2012 Wiley Periodicals, Inc.", "", "In uncertain scalar fields where data values vary with a certain probability, the strength of this variability indicates the confidence in the data. It does not, however, allow inferring on the effect of uncertainty on differential quantities such as the gradient, which depend on the variability of the rate of change of the data. Analyzing the variability of gradients is nonetheless more complicated, since, unlike scalars, gradients vary in both strength and direction. This requires initially the mathematical derivation of their respective value ranges, and then the development of effective analysis techniques for these ranges. This paper takes a first step into this direction: Based on the stochastic modeling of uncertainty via multivariate random variables, we start by deriving uncertainty parameters, such as the mean and the covariance matrix, for gradients in uncertain discrete scalar fields. We do not make any assumption about the distribution of the random variables. Then, for the first time to our best knowledge, we develop a mathematical framework for computing confidence intervals for both the gradient orientation and the strength of the derivative in any prescribed direction, for instance, the mean gradient direction. While this framework generalizes to 3D uncertain scalar fields, we concentrate on the visualization of the resulting intervals in 2D fields. We propose a novel color diffusion scheme to visualize both the absolute variability of the derivative strength and its magnitude relative to the mean values. A special family of circular glyphs is introduced to convey the uncertainty in gradient orientation. For a number of synthetic and real-world data sets, we demonstrate the use of our approach for analyzing the stability of certain features in uncertain 2D scalar fields, with respect to both local derivatives and feature orientation.", "Characterization of the earth's subsurface involves the construction of 3D models from sparse data and so leads to simulation results that involve some degree of uncertainty. This uncertainty is often neglected in the subsequent visualization, due to the fact that no established methods or available software exist. We describe a visualization method to render scalar fields with a probability density function at each data point. We render these data as isosurfaces and make use of a colour scheme, which intuitively gives the viewer an idea of which parts of the surface are more reliable than others. We further show how to extract an envelope that indicates within which volume the isosurface will lie with a certain confidence, and augment the isosurfaces with additional geometry in order to show this information. The resulting visualization is easy and intuitive to understand and is suitable for rendering multiple distinguishable isosurfaces at a time. It can moreover be easily used together with other visualized objects, such as the geological context. Finally we show how we have integrated this into a visualization pipeline that is based on the Visualization Toolkit (VTK) and the open source scenegraph OpenSG, allowing us to render the results on a desktop and in different kinds of virtual environments." ] }

{ "cite_N": [ "@cite_38", "@cite_2" ], "mid": [ "2095233635", "2049885731" ], "abstract": [ "Uncertainty is ubiquitous in science, engineering and medicine. Drawing conclusions from uncertain data is the normal case, not an exception. While the field of statistical graphics is well established, only a few 2D and 3D visualization and feature extraction methods have been devised that consider uncertainty. We present mathematical formulations for uncertain equivalents of isocontours based on standard probability theory and statistics and employ them in interactive visualization methods. As input data, we consider discretized uncertain scalar fields and model these as random fields. To create a continuous representation suitable for visualization we introduce interpolated probability density functions. Furthermore, we introduce numerical condition as a general means in feature-based visualization. The condition number-which potentially diverges in the isocontour problem-describes how errors in the input data are amplified in feature computation. We show how the average numerical condition of isocontours aids the selection of thresholds that correspond to robust isocontours. Additionally, we introduce the isocontour density and the level crossing probability field; these two measures for the spatial distribution of uncertain isocontours are directly based on the probabilistic model of the input data. Finally, we adapt interactive visualization methods to evaluate and display these measures and apply them to 2D and 3D data sets.", "In this paper we revisit the computation and visualization of equivalents to isocontours in uncertain scalar fields. We model uncertainty by discrete random fields and, in contrast to previous methods, also take arbitrary spatial correlations into account. Starting with joint distributions of the random variables associated to the sample locations, we compute level crossing probabilities for cells of the sample grid. This corresponds to computing the probabilities that the well-known symmetry-reduced marching cubes cases occur in random field realizations. For Gaussian random fields, only marginal density functions that correspond to the vertices of the considered cell need to be integrated. We compute the integrals for each cell in the sample grid using a Monte Carlo method. The probabilistic ansatz does not suffer from degenerate cases that usually require case distinctions and solutions of ill-conditioned problems. Applications in 2D and 3D, both to synthetic and real data from ensemble simulations in climate research, illustrate the influence of spatial correlations on the spatial distribution of uncertain isocontours." ] }

{ "cite_N": [ "@cite_18", "@cite_54", "@cite_13", "@cite_7" ], "mid": [ "2051308568", "2296659714", "68571785", "2128347847" ], "abstract": [ "Uncertainty is a common and crucial issue in scientific data. The exploration and analysis of three-dimensional (3D) and large two-dimensional (2D) data with uncertainty information demand an effective visualization augmented with both user interaction and relevant context. The contour tree has been exploited as an efficient data structure to guide exploratory visualization. This paper proposes an interactive visualization tool for exploring data with quantitative uncertainty representations. First, we introduce a balanced planar hierarchical contour tree layout integrated with tree view interaction, allowing users to quickly navigate between levels of detail for contours of large data. Further, uncertainty information is attached to a planar contour tree layout to avoid the visual cluttering and occlusion in viewing uncertainty in 3D data or large 2D data. For the first time, the uncertainty information is explored as a combination of the data-level uncertainty which represents the uncertainty concerning the numerical values of the data, the contour variability which quantifies the positional variation of contours, and the topology variability which reveals the topological variation of contour trees. This information provides a new insight into how the uncertainty exists with and relates to the features of the data. The experimental results show that this new visualization facilitates a quick and accurate selection of prominent contours with high or low uncertainty and variability.", "We study contour trees of terrains, which encode the topological changes of the level set of the height value e as we raise e from -∞ to +∞ on the terrains, in the presence of uncertainty in data. We assume that the terrain is represented by a piecewise-linear height function over a planar triangulation M, by specifying the height of each vertex. We study the case when M is fixed and the uncertainty lies in the height of each vertex in the triangulation, which is described by a probability distribution. We present efficient sampling-based Monte Carlo methods for estimating, with high probability, (i) the probability that two points lie on the same edge of the contour tree, within additive error; (ii) the expected distance of two points p, q and the probability that the distance of p, q is at least e on the contour tree, within additive error, where the distance of p, q on a contour tree is defined to be the difference between the maximum height and the minimum height on the unique path from p to q on the contour tree. The main technical contribution of the paper is to prove that a small number of samples are sufficient to estimate these quantities. We present two applications of these algorithms, and also some experimental results to demonstrate the effectiveness of our approach.", "Contour trees can represent the topology of large volume data sets in a relatively compact, discrete data structure. However, the resulting trees often contain many thousands of nodes; thus, many graph drawing techniques fail to produce satisfactory results. Therefore, several visualization methods were proposed recently for the visualization of contour trees. Unfortunately, none of these techniques is able to handle uncertain contour trees although any uncertainty of the volume data inevitably results in partially uncertain contour trees. In this work, we visualize uncertain contour trees by combining the contour trees of two morphologically filtered versions of a volume data set, which represent the range of uncertainty. These two contour trees are combined and visualized within a single image such that a range of potential contour trees is represented by the resulting visualization. Thus, potentially erroneous topological structures are visually distinguished from more certain structures. Moreover, topological structures can be revealed that are otherwise obscured by data errors. We present and discuss results obtained with a prototypical implementation using well-known volume data sets.", "Most visualization systems fail to convey uncertainty within data. To provide a way to show uncertainty in similar hierarchies, we interpreted the differences between two tree structures as uncertainty. We developed a new interactive visualization system called CandidTree that merges two trees into one and visualizes two types of structural uncertainty: location and sub-tree structure uncertainty. Since CandidTree can visualize the differences between two tree structures, we conducted a series of user studies with tree-comparison tasks. First a usability study was conducted to identify major usability issues and evaluate how our system works. Another qualitative user study was conducted to see if biologists, who regularly work with hierarchically organized names, are able to use CandidTree, and to assess the 'uncertainty' metric we used. A controlled experiment with software engineers was conducted to compare CandidTree with WinDiff, a traditional files and folders comparison tool. The results showed that users performed better with CandidTree. Furthermore, CandidTree received better satisfaction ratings and all users preferred CandidTree to WinDiff." ] }

{ "cite_N": [ "@cite_61", "@cite_64", "@cite_4", "@cite_22", "@cite_21", "@cite_1", "@cite_39", "@cite_45", "@cite_50", "@cite_80", "@cite_34", "@cite_25", "@cite_20" ], "mid": [ "2895105248", "", "2335518360", "2806011050", "2148561979", "1499561838", "2962902468", "2056761334", "2781831736", "", "", "2789787607", "" ], "abstract": [ "", "", "We consider the problem of assessing the similarity of 3D shapes using Reeb graphs from the standpoint of robustness under perturbations. For this purpose, 3D objects are viewed as spaces endowed with real-valued functions, while the similarity between the resulting Reeb graphs is addressed through a graph edit distance. The cases of smooth functions on manifolds and piecewise linear functions on polyhedra stand out as the most interesting ones. The main contribution of this paper is the introduction of a general edit distance suitable for comparing Reeb graphs in these settings. This edit distance promises to be useful for applications in 3D object retrieval because of its stability properties in the presence of noise.", "The interleaving distance was originally defined in the field of Topological Data Analysis (TDA) by as a metric on the class of persistence modules parametrized over the real line. subsequently extended the definition to categories of functors on a poset, the objects in these categories being regarded as generalized persistence modules'. These metrics typically depend on the choice of a lax semigroup of endomorphisms of the poset. The purpose of the present paper is to develop a more general framework for the notion of interleaving distance using the theory of actegories'. Specifically, we extend the notion of interleaving distance to arbitrary categories equipped with a flow, i.e. a lax monoidal action by the monoid @math . In this way, the class of objects in such a category acquires the structure of a Lawvere metric space. Functors that are colax @math -equivariant yield maps that are @math -Lipschitz. This leads to concise proofs of various known stability results from TDA, by considering appropriate colax @math -equivariant functors. Along the way, we show that several common metrics, including the Hausdorff distance and the @math -norm, can be realized as interleaving distances in this general perspective.", "We consider the question of defining interleaving metrics on generalized persistence modules over arbitrary preordered sets. Our constructions are functorial, which implies a form of stability for these metrics. We describe a large class of examples, inverse-image persistence modules, which occur whenever a topological space is mapped to a metric space. Several standard theories of persistence and their stability can be described in this framework. This includes the classical case of sublevelset persistent homology. We introduce a distinction between soft' and hard' stability theorems. While our treatment is direct and elementary, the approach can be explained abstractly in terms of monoidal functors.", "The Reeb graph is a construction which originated in Morse theory to study a real-valued function defined on a topological space. More recently, it has been used in various applications to study noisy data which creates a desire to define a measure of similarity between these structures. Here, we exploit the fact that the category of Reeb graphs is equivalent to the category of a particular class of cosheaf. Using this equivalency, we can define an interleaving' distance between Reeb graphs which is stable under the perturbation of a function. Along the way, we obtain a natural construction for smoothing a Reeb graph to reduce its topological complexity. The smoothed Reeb graph can be constructed in polynomial time.", "We propose a metric for Reeb graphs, called the functional distortion distance. Under this distance, the Reeb graph is stable against small changes of input functions. At the same time, it remains discriminative at differentiating input functions. In particular, the main result is that the functional distortion distance between two Reeb graphs is bounded from below by the bottleneck distance between both the ordinary and extended persistence diagrams for appropriate dimensions. As an application of our results, we analyze a natural simplification scheme for Reeb graphs, and show that persistent features in Reeb graph remains persistent under simplification. Understanding the stability of important features of the Reeb graph under simplification is an interesting problem on its own right, and critical to the practical usage of Reeb graphs.", "Topological persistence has proven to be a key concept for the study of real-valued functions defined over topological spaces. Its validity relies on the fundamental property that the persistence diagrams of nearby functions are close. However, existing stability results are restricted to the case of continuous functions defined over triangulable spaces. In this paper, we present new stability results that do not suffer from the above restrictions. Furthermore, by working at an algebraic level directly, we make it possible to compare the persistence diagrams of functions defined over different spaces, thus enabling a variety of new applications of the concept of persistence. Along the way, we extend the definition of persistence diagram to a larger setting, introduce the notions of discretization of a persistence module and associated pixelization map, define a proximity measure between persistence modules, and show how to interpolate between persistence modules, thereby lending a more analytic character to this otherwise algebraic setting. We believe these new theoretical concepts and tools shed new light on the theory of persistence, in addition to simplifying proofs and enabling new applications.", "We consider the setting of Reeb graphs of piecewise linear functions and study distances between them that are stable, meaning that functions which are similar in the supremum norm ought to have similar Reeb graphs. We define an edit distance for Reeb graphs and prove that it is stable and universal, meaning that it provides an upper bound to any other stable distance. In contrast, via a specific construction, we show that the interleaving distance and the functional distortion distance on Reeb graphs are not universal.", "", "", "There are many metrics available to compare phylogenetic trees since this is a fundamental task in computational biology. In this paper, we focus on one such metric, the l∞-cophenetic metric introduced by This metric works by representing a phylogenetic tree with n labeled leaves as a point in ( R ^ n(n+1) 2 ) known as the cophenetic vector, then comparing the two resulting Euclidean points using the l∞ distance. Meanwhile, the interleaving distance is a formal categorical construction generalized from the definition of , originally introduced to compare persistence modules arising from the field of topological data analysis. We show that the l∞-cophenetic metric is an example of an interleaving distance. To do this, we define phylogenetic trees as a category of merge trees with some additional structure, namely, labelings on the leaves plus a requirement that morphisms respect these labels. Then we can use the definition of a flow on this category to give an interleaving distance. Finally, we show that, because of the additional structure given by the categories defined, the map sending a labeled merge tree to the cophenetic vector is, in fact, an isometric embedding, thus proving that the l∞-cophenetic metric is an interleaving distance.", "" ] }

{ "cite_N": [ "@cite_68" ], "mid": [ "2108380304" ], "abstract": [ "Background Phylogenetic tree comparison metrics are an important tool in the study of evolution, and hence the definition of such metrics is an interesting problem in phylogenetics. In a paper in Taxon fifty years ago, Sokal and Rohlf proposed to measure quantitatively the difference between a pair of phylogenetic trees by first encoding them by means of their half-matrices of cophenetic values, and then comparing these matrices. This idea has been used several times since then to define dissimilarity measures between phylogenetic trees but, to our knowledge, no proper metric on weighted phylogenetic trees with nested taxa based on this idea has been formally defined and studied yet. Actually, the cophenetic values of pairs of different taxa alone are not enough to single out phylogenetic trees with weighted arcs or nested taxa." ] }

{ "cite_N": [ "@cite_26", "@cite_22", "@cite_8", "@cite_9", "@cite_44", "@cite_24", "@cite_23", "@cite_34", "@cite_20" ], "mid": [ "2161506909", "1971955426", "2242161203", "2099192586", "2106315062", "2083666679", "2405982180", "2579372251", "2574817444" ], "abstract": [ "In this article we propose new methods for computing the asymptotic value for the logarithm of the partition function (free energy) for certain statistical physics models on certain type of finite graphs, as the size of the underlying graph goes to infinity. The two models considered are the hard-core (independent set) model when the activity parameter λ is small, and also the Potts (q-coloring) model. We only consider the graphs with large girth. In particular, we prove that asymptotically the logarithm of the number of independent sets of any r-regular graph with large girth when rescaled is approximately constant if r ≤ 5. For example, we show that every 4-regular n-node graph with large girth has approximately (1.494…)n-many independent sets, for large n. Further, we prove that for every r-regular graph with r ≥ 2, with n nodes and large girth, the number of proper q ≥ r + 1 colorings is approximately @math n, for large n. We also show that these results hold for random regular graphs with high probability (w.h.p.) as well. As a byproduct of our method we obtain simple algorithms for the problem of computing approximately the logarithm of the number of independent sets and proper colorings, in low degree graphs with large girth. These algorithms are deterministic and use certain correlation decay properties for the corresponding Gibbs measures, and its implications to uniqueness of the Gibbs measures on the infinite trees, as well as some simple cavity trick which is well known in the physics and the Markov chain sampling literature.© 2008 Wiley Periodicals, Inc. Random Struct. Alg., 2008 Preliminary version of this paper appeared in Proceedings of the Seventeenth ACM-SIAM Symposium on Discrete Algorithms 2006. ArXive version.", "Identifying the same individual across different scenes is an important yet difficult task in intelligent video surveillance. Its main difficulty lies in how to preserve similarity of the same person against large appearance and structure variation while discriminating different individuals. In this paper, we present a scalable distance driven feature learning framework based on the deep neural network for person re-identification, and demonstrate its effectiveness to handle the existing challenges. Specifically, given the training images with the class labels (person IDs), we first produce a large number of triplet units, each of which contains three images, i.e. one person with a matched reference and a mismatched reference. Treating the units as the input, we build the convolutional neural network to generate the layered representations, and follow with the L 2 distance metric. By means of parameter optimization, our framework tends to maximize the relative distance between the matched pair and the mismatched pair for each triplet unit. Moreover, a nontrivial issue arising with the framework is that the triplet organization cubically enlarges the number of training triplets, as one image can be involved into several triplet units. To overcome this problem, we develop an effective triplet generation scheme and an optimized gradient descent algorithm, making the computational load mainly depend on the number of original images instead of the number of triplets. On several challenging databases, our approach achieves very promising results and outperforms other state-of-the-art approaches. HighlightsWe present a novel feature learning framework for person re-identification.Our framework is based on the maximum relative distance comparison.The learning algorithm is scalable to process large amount of data.We demonstrate superior performances over other state-of-the-arts.", "Representation learning has shown its effectiveness in many tasks such as image classification and text mining. Network representation learning aims at learning distributed vector representation for each vertex in a network, which is also increasingly recognized as an important aspect for network analysis. Most network representation learning methods investigate network structures for learning. In reality, network vertices contain rich information (such as text), which cannot be well applied with algorithmic frameworks of typical representation learning methods. By proving that DeepWalk, a state-of-the-art network representation method, is actually equivalent to matrix factorization (MF), we propose text-associated DeepWalk (TADW). TADW incorporates text features of vertices into network representation learning under the framework of matrix factorization. We evaluate our method and various baseline methods by applying them to the task of multi-class classification of vertices. The experimental results show that, our method outperforms other baselines on all three datasets, especially when networks are noisy and training ratio is small. The source code of this paper can be obtained from https: github.com albertyang33 TADW.", "This study promotes the use of statistical methods in specific classification tasks since statistical methods have certain advantages which advocate their use in pattern recognition. One central problem in statistical methods is estimation of class conditional probability density functions based on examples in a training set. In this study maximum likelihood estimation methods for Gaussian mixture models are reviewed and discussed from a practical point of view. In addition, good practices for utilizing probability densities in feature classification and selection are discussed for Bayesian and, more importantly, for non-Bayesian tasks. As a result, the use of confidence information in the classification is proposed and a method for confidence estimation is presented. The propositions are tested experimentally.", "Breadth First Search (BFS) is a widely used approach for sampling large graphs. However, it has been empirically observed that BFS sampling is biased toward high-degree nodes, which may strongly affect the measurement results. In this paper, we quantify and correct the degree bias of BFS. First, we consider a random graph RG(pk) with an arbitrary degree distribution pk. For this model, we calculate the node degree distribution expected to be observed by BFS as a function of the fraction f of covered nodes. We also show that, for RG(pk), all commonly used graph traversal techniques (BFS, DFS, Forest Fire, Snowball Sampling, RDS) have exactly the same bias. Next, we propose a practical BFS-bias correction procedure that takes as input a collected BFS sample together with the fraction f. Our correction technique is exact (i.e., leads to unbiased estimation) for RG(pk). Furthermore, it performs well when applied to a broad range of Internet topologies and to two large BFS samples of Facebook and Orkut networks.", "By removing the irrelevant and redundant features, feature selection aims to find a compact representation of the original feature with good generalization ability. With the prevalence of unlabeled data, unsupervised feature selection has shown to be effective in alleviating the curse of dimensionality, and is essential for comprehensive analysis and understanding of myriads of unlabeled high dimensional data. Motivated by the success of low-rank representation in subspace clustering, we propose a regularized self-representation (RSR) model for unsupervised feature selection, where each feature can be represented as the linear combination of its relevant features. By using L 2 , 1 -norm to characterize the representation coefficient matrix and the representation residual matrix, RSR is effective to select representative features and ensure the robustness to outliers. If a feature is important, then it will participate in the representation of most of other features, leading to a significant row of representation coefficients, and vice versa. Experimental analysis on synthetic and real-world data demonstrates that the proposed method can effectively identify the representative features, outperforming many state-of-the-art unsupervised feature selection methods in terms of clustering accuracy, redundancy reduction and classification accuracy. HighlightsA regularized self-representation (RSR) model is proposed for unsupervised feature selection.An iterative reweighted least-squares algorithm is proposed to solve the RSR model.The proposed method shows superior performance to state-of-the-art.", "This paper provides algorithms for predicting the size of the Expanded Search Tree (EST) of Depth-first Branch and Bound algorithms (DFBnB) for optimization tasks. The prediction algorithm is implemented and evaluated in the context of solving combinatorial optimization problems over graphical models such as Bayesian and Markov networks. Our methods extend to DFBnB the approaches provided by Knuth-Chen schemes that were designed and applied for predicting the EST size of backtracking search algorithms. Our empirical results demonstrate good predictions which are superior to competing schemes.", "DeepWalk is a typical representation learning method that learns low-dimensional representations for vertices in social networks. Similar to other network representation learning (NRL) models, it encodes the network structure into vertex representations and is learnt in unsupervised form. However, the learnt representations usually lack the ability of discrimination when applied to machine learning tasks, such as vertex classification. In this paper, we overcome this challenge by proposing a novel semi-supervised model, max-margin Deep-Walk (MMDW). MMDW is a unified NRL framework that jointly optimizes the max-margin classifier and the aimed social representation learning model. Influenced by the max-margin classifier, the learnt representations not only contain the network structure, but also have the characteristic of discrimination. The visualizations of learnt representations indicate that our model is more discriminative than unsupervised ones, and the experimental results on vertex classification demonstrate that our method achieves a significant improvement than other state-of-the-art methods. The source code can be obtained from https: github.com thunlp MMDW.", "Information network mining often requires examination of linkage relationships between nodes for analysis. Recently, network representation has emerged to represent each node in a vector format, embedding network structure, so off-the-shelf machine learning methods can be directly applied for analysis. To date, existing methods only focus on one aspect of node information and cannot leverage node labels. In this paper, we propose TriDNR, a tri-party deep network representation model, using information from three parties: node structure, node content, and node labels (if available) to jointly learn optimal node representation. TriDNR is based on our new coupled deep natural language module, whose learning is enforced at three levels: (1) at the network structure level, TriDNR exploits inter-node relationship by maximizing the probability of observing surrounding nodes given a node in random walks; (2) at the node content level, TriDNR captures node-word correlation by maximizing the co-occurrence of word sequence given a node; and (3) at the node label level, TriDNR models label-word correspondence by maximizing the probability of word sequence given a class label. The tri-party information is jointly fed into the neural network model to mutually enhance each other to learn optimal representation, and results in up to 79 classification accuracy gain, compared to state-of-the-art methods." ] }

{ "cite_N": [ "@cite_19", "@cite_18", "@cite_29", "@cite_1" ], "mid": [ "1888005072", "2962756421", "2607500032", "2154851992" ], "abstract": [ "This paper studies the problem of embedding very large information networks into low-dimensional vector spaces, which is useful in many tasks such as visualization, node classification, and link prediction. Most existing graph embedding methods do not scale for real world information networks which usually contain millions of nodes. In this paper, we propose a novel network embedding method called the LINE,'' which is suitable for arbitrary types of information networks: undirected, directed, and or weighted. The method optimizes a carefully designed objective function that preserves both the local and global network structures. An edge-sampling algorithm is proposed that addresses the limitation of the classical stochastic gradient descent and improves both the effectiveness and the efficiency of the inference. Empirical experiments prove the effectiveness of the LINE on a variety of real-world information networks, including language networks, social networks, and citation networks. The algorithm is very efficient, which is able to learn the embedding of a network with millions of vertices and billions of edges in a few hours on a typical single machine. The source code of the LINE is available online https: github.com tangjianpku LINE .", "Prediction tasks over nodes and edges in networks require careful effort in engineering features used by learning algorithms. Recent research in the broader field of representation learning has led to significant progress in automating prediction by learning the features themselves. However, present feature learning approaches are not expressive enough to capture the diversity of connectivity patterns observed in networks. Here we propose node2vec, an algorithmic framework for learning continuous feature representations for nodes in networks. In node2vec, we learn a mapping of nodes to a low-dimensional space of features that maximizes the likelihood of preserving network neighborhoods of nodes. We define a flexible notion of a node's network neighborhood and design a biased random walk procedure, which efficiently explores diverse neighborhoods. Our algorithm generalizes prior work which is based on rigid notions of network neighborhoods, and we argue that the added flexibility in exploring neighborhoods is the key to learning richer representations. We demonstrate the efficacy of node2vec over existing state-of-the-art techniques on multi-label classification and link prediction in several real-world networks from diverse domains. Taken together, our work represents a new way for efficiently learning state-of-the-art task-independent representations in complex networks.", "Structural identity is a concept of symmetry in which network nodes are identified according to the network structure and their relationship to other nodes. Structural identity has been studied in theory and practice over the past decades, but only recently has it been addressed with representational learning techniques. This work presents struc2vec, a novel and flexible framework for learning latent representations for the structural identity of nodes. struc2vec uses a hierarchy to measure node similarity at different scales, and constructs a multilayer graph to encode structural similarities and generate structural context for nodes. Numerical experiments indicate that state-of-the-art techniques for learning node representations fail in capturing stronger notions of structural identity, while struc2vec exhibits much superior performance in this task, as it overcomes limitations of prior approaches. As a consequence, numerical experiments indicate that struc2vec improves performance on classification tasks that depend more on structural identity.", "We present DeepWalk, a novel approach for learning latent representations of vertices in a network. These latent representations encode social relations in a continuous vector space, which is easily exploited by statistical models. DeepWalk generalizes recent advancements in language modeling and unsupervised feature learning (or deep learning) from sequences of words to graphs. DeepWalk uses local information obtained from truncated random walks to learn latent representations by treating walks as the equivalent of sentences. We demonstrate DeepWalk's latent representations on several multi-label network classification tasks for social networks such as BlogCatalog, Flickr, and YouTube. Our results show that DeepWalk outperforms challenging baselines which are allowed a global view of the network, especially in the presence of missing information. DeepWalk's representations can provide F1 scores up to 10 higher than competing methods when labeled data is sparse. In some experiments, DeepWalk's representations are able to outperform all baseline methods while using 60 less training data. DeepWalk is also scalable. It is an online learning algorithm which builds useful incremental results, and is trivially parallelizable. These qualities make it suitable for a broad class of real world applications such as network classification, and anomaly detection." ] }

{ "cite_N": [ "@cite_42", "@cite_1", "@cite_6", "@cite_31", "@cite_13", "@cite_11" ], "mid": [ "1527463082", "2154851992", "2950627632", "1995213405", "1994687138", "" ], "abstract": [ "Many communication and social networks have power-law link distributions, containing a few nodes that have a very high degree and many with low degree. The high connectivity nodes play the important role of hubs in communication and networking, a fact that can be exploited when designing efficient search algorithms. We introduce a number of local search strategies that utilize high degree nodes in power-law graphs and that have costs scaling sublinearly with the size of the graph. We also demonstrate the utility of these strategies on the GNUTELLA peer-to-peer network.", "We present DeepWalk, a novel approach for learning latent representations of vertices in a network. These latent representations encode social relations in a continuous vector space, which is easily exploited by statistical models. DeepWalk generalizes recent advancements in language modeling and unsupervised feature learning (or deep learning) from sequences of words to graphs. DeepWalk uses local information obtained from truncated random walks to learn latent representations by treating walks as the equivalent of sentences. We demonstrate DeepWalk's latent representations on several multi-label network classification tasks for social networks such as BlogCatalog, Flickr, and YouTube. Our results show that DeepWalk outperforms challenging baselines which are allowed a global view of the network, especially in the presence of missing information. DeepWalk's representations can provide F1 scores up to 10 higher than competing methods when labeled data is sparse. In some experiments, DeepWalk's representations are able to outperform all baseline methods while using 60 less training data. DeepWalk is also scalable. It is an online learning algorithm which builds useful incremental results, and is trivially parallelizable. These qualities make it suitable for a broad class of real world applications such as network classification, and anomaly detection.", "When the probability of measuring a particular value of some quantity varies inversely as a power of that value, the quantity is said to follow a power law, also known variously as Zipf's law or the Pareto distribution. Power laws appear widely in physics, biology, earth and planetary sciences, economics and finance, computer science, demography and the social sciences. For instance, the distributions of the sizes of cities, earthquakes, forest fires, solar flares, moon craters and people's personal fortunes all appear to follow power laws. The origin of power-law behaviour has been a topic of debate in the scientific community for more than a century. Here we review some of the empirical evidence for the existence of power-law forms and the theories proposed to explain them.", "For decades, we tacitly assumed that the components of such complex systems as the cell, the society, or the Internet are randomly wired together. In the past decade, an avalanche of research has shown that many real networks, independent of their age, function, and scope, converge to similar architectures, a universality that allowed researchers from different disciplines to embrace network theory as a common paradigm. The decade-old discovery of scale-free networks was one of those events that had helped catalyze the emergence of network science, a new research field with its distinct set of challenges and accomplishments.", "Barabasi and Albert ([1][1]) propose an improved version of the Erdos-Renyi (ER) theory of random networks to account for the scaling properties of a number of systems, including the link structure of the World Wide Web (WWW). The theory they present, however, is inconsistent with empirically", "" ] }

{ "cite_N": [ "@cite_25", "@cite_32", "@cite_12" ], "mid": [ "2899831870", "2604545383", "2962767366" ], "abstract": [ "This paper presents a general inductive graph representation learning framework called DeepGL for learning deep node and edge features that generalize across-networks. In particular, DeepGL begins by deriving a set of base features from the graph (e.g., graphlet features) and automatically learns a multi-layered hierarchical graph representation where each successive layer leverages the output from the previous layer to learn features of a higher-order. Contrary to previous work, DeepGL learns relational functions (each representing a feature) that naturally generalize across-networks and are therefore useful for graph-based transfer learning tasks. Moreover, DeepGL naturally supports attributed graphs, learns interpretable inductive graph representations, and is space-efficient (by learning sparse feature vectors). In addition, DeepGL is expressive, flexible with many interchangeable components, efficient with a time complexity of @math , and scalable for large networks via an efficient parallel implementation. Compared with recent methods, DeepGL is (1) effective for across-network transfer learning tasks and large (attributed) graphs, (2) space-efficient requiring up to 6x less memory, (3) fast with up to 106x speedup in runtime performance, and (4) accurate with an average improvement in AUC of 20 or more on many learning tasks and across a wide variety of networks.", "", "Low-dimensional embeddings of nodes in large graphs have proved extremely useful in a variety of prediction tasks, from content recommendation to identifying protein functions. However, most existing approaches require that all nodes in the graph are present during training of the embeddings; these previous approaches are inherently transductive and do not naturally generalize to unseen nodes. Here we present GraphSAGE, a general, inductive framework that leverages node feature information (e.g., text attributes) to efficiently generate node embeddings. Instead of training individual embeddings for each node, we learn a function that generates embeddings by sampling and aggregating features from a node's local neighborhood. Our algorithm outperforms strong baselines on three inductive node-classification benchmarks: we classify the category of unseen nodes in evolving information graphs based on citation and Reddit post data, and we show that our algorithm generalizes to completely unseen graphs using a multi-graph dataset of protein-protein interactions." ] }

{ "cite_N": [ "@cite_53", "@cite_58" ], "mid": [ "2767502902", "1977548994" ], "abstract": [ "We present in this paper a spectrally accurate numerical method for computing the spherical vector spherical harmonic expansion of a function vector field with given (elemental) nodal values on a spherical surface. Built upon suitable analytic formulas for dealing with the involved highly oscillatory integrands, the method is robust for high mode expansions. We apply the numerical method to the simulation of three-dimensional acoustic and electromagnetic multiple scattering problems. Various numerical evidences show that the high accuracy can be achieved within reasonable computational time. This also paves the way for spectral-element discretization of 3D scattering problems reduced by spherical transparent boundary conditions based on the Dirichlet-to-Neumann map.", "A memory package for storing data and capable of being added to or replaced while being provided with a battery backup in computer systems which can be mounted with a plurality of said memory packages. A memory package also has a function to reduce power consumption of the battery backup to a minimum, when the memory package with battery backup is inserted into the computer system without the main power being applied. Consequently, even if additional memory packages are inserted in computer systems installable with memory packages having battery backups, only a weak current need be supplied from the backup power supply so that the battery will not run down after a short time. The memory packages can therefore be added and replaced while still storing data internally and the memory capacity can be changed. Also, a memory system is provided including a power supply supplying power supply lines connected to the memory packages. Diode and or surge protection arrangements are also provided to facilitate hot line insertion and removal." ] }

{ "cite_N": [ "@cite_30", "@cite_18", "@cite_29", "@cite_6", "@cite_56", "@cite_57", "@cite_19", "@cite_40", "@cite_5", "@cite_31", "@cite_20" ], "mid": [ "1977400967", "2611374796", "", "2128852435", "", "2137167595", "", "2788435232", "", "", "2511469011" ], "abstract": [ "We introduce an algorithm for automatic selection of semantically-resonant colors to represent data (e.g., using blue for data about \"oceans\", or pink for \"love\"). Given a set of categorical values and a target color palette, our algorithm matches each data value with a unique color. Values are mapped to colors by collecting representative images, analyzing image color distributions to determine value-color affinity scores, and choosing an optimal assignment. Our affinity score balances the probability of a color with how well it discriminates among data values. A controlled study shows that expert-chosen semantically-resonant colors improve speed on chart reading tasks compared to a standard palette, and that our algorithm selects colors that lead to similar gains. A second study verifies that our algorithm effectively selects colors across a variety of data categories.", "Communicating the right affect, a feeling, experience or emotion, is critical in creating engaging visual communication. We carried out three studies examining how different color properties (lightness, chroma and hue) and different palette properties (combinations and distribution of colors) contribute to different affective interpretations in information visualization where the numbers of colors is typically smaller than the rich palettes used in design. Our results show how color and palette properties can be manipulated to achieve affective expressiveness even in the small sets of colors used for data encoding in information visualization.", "", "We describe a technique for choosing multiple colours for use during data visualization. Our goal is a systematic method for maximizing the total number of colours available for use, while still allowing an observer to rapidly and accurately search a display for any one of the given colours. Previous research suggests that we need to consider three separate effects during colour selection: colour distance, linear separation, and colour category. We describe a simple method for measuring and controlling all of these effects. Our method was tested by performing a set of target identification studies; we analysed the ability of thirty eight observers to find a colour target in displays that contained differently coloured background elements. Results showed our method can be used to select a group of colours that will provide good differentiation between data elements during data visualization.", "", "Our ability to reliably name colors provides a link between visual perception and symbolic cognition. In this paper, we investigate how a statistical model of color naming can enable user interfaces to meaningfully mimic this link and support novel interactions. We present a method for constructing a probabilistic model of color naming from a large, unconstrained set of human color name judgments. We describe how the model can be used to map between colors and names and define metrics for color saliency (how reliably a color is named) and color name distance (the similarity between colors based on naming patterns). We then present a series of applications that demonstrate how color naming models can enhance graphical interfaces: a color dictionary & thesaurus, name-based pixel selection methods for image editing, and evaluation aids for color palette design.", "", "People interpret abstract meanings from colors, which makes color a useful perceptual feature for visual communication. This process is complicated, however, because there is seldom a one-to-one correspondence between colors and meanings. One color can be associated with many different concepts (one-to-many mapping) and many colors can be associated with the same concept (many-to-one mapping). We propose that to interpret color-coding systems, people perform assignment inference to determine how colors map onto concepts. We studied assignment inference in the domain of recycling. Participants saw images of colored but unlabeled bins and were asked to indicate which bins they would use to discard different kinds of recyclables and trash. In Experiment 1, we tested two hypotheses for how people perform assignment inference. The local assignment hypothesis predicts that people simply match objects with their most strongly associated color. The global assignment hypothesis predicts that people also account for the association strengths between all other objects and colors within the scope of the color-coding system. Participants discarded objects in bins that optimized the color-object associations of the entire set, which is consistent with the global assignment hypothesis. This sometimes resulted in discarding objects in bins whose colors were weakly associated with the object, even when there was a stronger associated option available. In Experiment 2, we tested different methods for encoding color-coding systems and found that people were better at assignment inference when color sets simultaneously maximized the association strength between assigned color-object parings while minimizing associations between unassigned pairings. Our study provides an approach for designing intuitive color-coding systems that facilitate communication through visual media such as graphs, maps, signs, and artifacts.", "", "", "We present an evaluation of Colorgorical, a web-based tool for creating discriminable and aesthetically preferable categorical color palettes. Colorgorical uses iterative semi-random sampling to pick colors from CIELAB space based on user-defined discriminability and preference importances. Colors are selected by assigning each a weighted sum score that applies the user-defined importances to Perceptual Distance, Name Difference, Name Uniqueness, and Pair Preference scoring functions, which compare a potential sample to already-picked palette colors. After, a color is added to the palette by randomly sampling from the highest scoring palettes. Users can also specify hue ranges or build off their own starting palettes. This procedure differs from previous approaches that do not allow customization (e.g., pre-made ColorBrewer palettes) or do not consider visualization design constraints (e.g., Adobe Color and ACE). In a Palette Score Evaluation, we verified that each scoring function measured different color information. Experiment 1 demonstrated that slider manipulation generates palettes that are consistent with the expected balance of discriminability and aesthetic preference for 3-, 5-, and 8-color palettes, and also shows that the number of colors may change the effectiveness of pair-based discriminability and preference scores. For instance, if the Pair Preference slider were upweighted, users would judge the palettes as more preferable on average. Experiment 2 compared Colorgorical palettes to benchmark palettes (ColorBrewer, Microsoft, Tableau, Random). Colorgorical palettes are as discriminable and are at least as preferable or more preferable than the alternative palette sets. In sum, Colorgorical allows users to make customized color palettes that are, on average, as effective as current industry standards by balancing the importance of discriminability and aesthetic preference." ] }

{ "cite_N": [ "@cite_19" ], "mid": [ "2152383085" ], "abstract": [ "We consider the problem of computing optimal plans for propositional planning problems with action costs. In the spirit of leveraging advances in general-purpose automated reasoning for that setting, we develop an approach that operates by solving a sequence of partial weighted MaxSAT problems, each of which corresponds to a step-bounded variant of the problem at hand. Our approach is the first SAT-based system in which a proof of cost optimality is obtained using a MaxSAT procedure. It is also the first system of this kind to incorporate an admissible planning heuristic. We perform a detailed empirical evaluation of our work using benchmarks from a number of International Planning Competitions." ] }

{ "cite_N": [ "@cite_20" ], "mid": [ "2200283827" ], "abstract": [ "This paper deals with planning domains that appear in computer games, especially when modeling intelligent virtual agents. Some of these domains contain only actions with no negative effects and are thus treated as easy from the planning perspective. We propose two new techniques to solve the problems in these planning domains, a heuristic search algorithm ANA* and a constraint-based planner RelaxPlan, and we compare them with the state-of-the-art planners, that were successful in IPC, using planning domains motivated by computer games." ] }

{ "cite_N": [ "@cite_7" ], "mid": [ "2048644716" ], "abstract": [ "Reduction to SAT is a very successful approach to solving hard combinatorial problems in Artificial Intelligence and computer science in general. Most commonly, problem instances reduced to SAT are solved with a general-purpose SAT solver. Although there is the obvious possibility of improving the SAT solving process with application-specific heuristics, this has rarely been done successfully. In this work we propose a planning-specific variable selection strategy for SAT solving. The strategy is based on generic principles about properties of plans, and its performance with standard planning benchmarks often substantially improves on generic variable selection heuristics, such as VSIDS, and often lifts it to the same level with other search methods such as explicit state-space search with heuristic search algorithms." ] }

{ "cite_N": [ "@cite_13" ], "mid": [ "2574105631" ], "abstract": [ "In this paper we present greedy methods for selecting a subset of heuristic functions for guiding A* search. Our methods are able to optimize various objective functions while selecting a subset from a pool of up to thousands of heuristics. Specifically, our methods minimize approximations of A*'s search tree size, and approximations of A*'s running time. We show empirically that our methods can outperform state-of-the-art planners for deterministic optimal planning." ] }

{ "cite_N": [ "@cite_1" ], "mid": [ "2208493917" ], "abstract": [ "We present the first effective SAT heuristics for planning with expressive planning languages such as ADL. Recently, SAT heuristics for STRIPS planning have been introduced. In this work we show that the basic ideas in the heuristic can be generalized to actions with conditional effects but without disjunction, and that disjunction requires a more fundamental analysis of the STRIPS heuristic, which, despite complications, will still lead to a natural heuristic which can be implemented efficiently. The experimental analysis shows substantial and systematic improvements over the state of the art in planning with SAT with ADL." ] }

{ "cite_N": [ "@cite_0" ], "mid": [ "1540013686" ], "abstract": [ "Property Directed Reachability (PDR) is a very promising recent method for deciding reachability in symbolically represented transition systems. While originally conceived as a model checking algorithm for hardware circuits, it has already been successfully applied in several other areas. This paper is the first investigation of PDR from the perspective of automated planning. Similarly to the planning as satisfiability paradigm, PDR draws its strength from internally employing an efficient SAT-solver. We show that most standard encoding schemes of planning into SAT can be directly used to turn PDR into a planning algorithm. As a non-obvious alternative, we propose to replace the SAT-solver inside PDR by a planning-specific procedure implementing the same interface. This SAT-solver free variant is not only more efficient, but offers additional insights and opportunities for further improvements. An experimental comparison to the state of the art planners finds it highly competitive, solving most problems on several domains." ] }

{ "cite_N": [ "@cite_28", "@cite_10", "@cite_36", "@cite_20" ], "mid": [ "", "2162670057", "189447628", "2025432722" ], "abstract": [ "", "Similarity search applications with a large amount of text and image data demands an efficient and effective solution. One useful strategy is to represent the examples in databases as compact binary codes through semantic hashing, which has attracted much attention due to its fast query search speed and drastically reduced storage requirement. All of the current semantic hashing methods only deal with the case when each example is represented by one type of features. However, examples are often described from several different information sources in many real world applications. For example, the characteristics of a webpage can be derived from both its content part and its associated links. To address the problem of learning good hashing codes in this scenario, we propose a novel research problem -- Composite Hashing with Multiple Information Sources (CHMIS). The focus of the new research problem is to design an algorithm for incorporating the features from different information sources into the binary hashing codes efficiently and effectively. In particular, we propose an algorithm CHMIS-AW (CHMIS with Adjusted Weights) for learning the codes. The proposed algorithm integrates information from several different sources into the binary hashing codes by adjusting the weights on each individual source for maximizing the coding performance, and enables fast conversion from query examples to their binary hashing codes. Experimental results on five different datasets demonstrate the superior performance of the proposed method against several other state-of-the-art semantic hashing techniques.", "Learning to hash involves learning hash functions from a set of images for embedding high-dimensional visual descriptors into a similarity-preserving low-dimensional Hamming space. Most of existing methods resort to a single representation of images, that is, only one type of visual descriptors is used to learn a hash function to assign binary codes to images. However, images are often described by multiple different visual descriptors (such as SIFT, GIST, HOG), so it is desirable to incorporate these multiple representations into learning a hash function, leading to multi-view hashing. In this paper we present a sequential spectral learning approach to multi-view hashing where a hash function is sequentially determined by solving the successive maximization of local variances subject to decorrelation constraints. We compute multi-view local variances by α-averaging view-specific distance matrices such that the best averaged distance matrix is determined by minimizing its α-divergence from view-specific distance matrices. We also present a scalable implementation, exploiting a fast approximate k-NN graph construction method, in which α-averaged distances computed in small partitions determined by recursive spectral bisection are gradually merged in conquer steps until whole examples are used. Numerical experiments on Caltech-256, CIFAR-20, and NUS-WIDE datasets confirm the high performance of our method, in comparison to single-view spectral hashing as well as existing multi-view hashing methods.", "Near-duplicate video retrieval (NDVR) has recently attracted much research attention due to the exponential growth of online videos. It has many applications, such as copyright protection, automatic video tagging and online video monitoring. Many existing approaches use only a single feature to represent a video for NDVR. However, a single feature is often insufficient to characterize the video content. Moreover, while the accuracy is the main concern in previous literatures, the scalability of NDVR algorithms for large scale video datasets has been rarely addressed. In this paper, we present a novel approach-Multiple Feature Hashing (MFH) to tackle both the accuracy and the scalability issues of NDVR. MFH preserves the local structural information of each individual feature and also globally considers the local structures for all the features to learn a group of hash functions to map the video keyframes into the Hamming space and generate a series of binary codes to represent the video dataset. We evaluate our approach on a public video dataset and a large scale video dataset consisting of 132,647 videos collected from YouTube by ourselves. This dataset has been released (http: itee.uq.edu.au shenht UQ_VIDEO ). The experimental results show that the proposed method outperforms the state-of-the-art techniques in both accuracy and efficiency." ] }

{ "cite_N": [ "@cite_30", "@cite_35", "@cite_38", "@cite_32", "@cite_3", "@cite_24", "@cite_16", "@cite_10" ], "mid": [ "2213253086", "2159373756", "154472438", "2251084241", "1976258951", "2086958058", "1922199343", "2162670057" ], "abstract": [ "Multimodal hashing is essential to cross-media similarity search for its low storage cost and fast query speed. Most existing multimodal hashing methods embedded heterogeneous data into a common low-dimensional Hamming space, and then rounded the continuous embeddings to obtain the binary codes. Yet they usually neglect the inherent discrete nature of hashing for relaxing the discrete constraints, which will cause degraded retrieval performance especially for long codes. For this purpose, a novel Semantic Topic Multimodal Hashing (STMH) is developed by considering latent semantic information in coding procedure. It first discovers clustering patterns of texts and robust factorizes the matrix of images to obtain multiple semantic topics of texts and concepts of images. Then the learned multimodal semantic features are transformed into a common subspace by their correlations. Finally, each bit of unified hash code can be generated directly by figuring out whether a topic or concept is contained in a text or an image. Therefore, the obtained model by STMH is more suitable for hashing scheme as it directly learns discrete hash codes in the coding process. Experimental results demonstrate that the proposed method outperforms several state-of-the-art methods.", "Most existing cross-modal hashing methods suffer from the scalability issue in the training phase. In this paper, we propose a novel cross-modal hashing approach with a linear time complexity to the training data size, to enable scalable indexing for multimedia search across multiple modals. Taking both the intra-similarity in each modal and the inter-similarity across different modals into consideration, the proposed approach aims at effectively learning hash functions from large-scale training datasets. More specifically, for each modal, we first partition the training data into @math clusters and then represent each training data point with its distances to @math centroids of the clusters. Interestingly, such a k-dimensional data representation can reduce the time complexity of the training phase from traditional O(n2) or higher to O(n), where @math is the training data size, leading to practical learning on large-scale datasets. We further prove that this new representation preserves the intra-similarity in each modal. To preserve the inter-similarity among data points across different modals, we transform the derived data representations into a common binary subspace in which binary codes from all the modals are \"consistent\" and comparable. nThe transformation simultaneously outputs the hash functions for all modals, which are used to convert unseen data into binary codes. Given a query of one modal, it is first mapped into the binary codes using the modal's hash functions, followed by matching the database binary codes of any other modals. Experimental results on two benchmark datasets confirm the scalability and the effectiveness of the proposed approach in comparison with the state of the art.", "Data often consists of multiple diverse modalities. For example, images are tagged with textual information and videos are accompanied by audio. Each modality is characterized by having distinct statistical properties. We propose a Deep Boltzmann Machine for learning a generative model of such multimodal data. We show that the model can be used to create fused representations by combining features across modalities. These learned representations are useful for classification and information retrieval. By sampling from the conditional distributions over each data modality, it is possible to create these representations even when some data modalities are missing. We conduct experiments on bimodal image-text and audio-video data. The fused representation achieves good classification results on the MIR-Flickr data set matching or outperforming other deep models as well as SVM based models that use Multiple Kernel Learning. We further demonstrate that this multimodal model helps classification and retrieval even when only unimodal data is available at test time.", "Multi-modal retrieval is emerging as a new search paradigm that enables seamless information retrieval from various types of media. For example, users can simply snap a movie poster to search relevant reviews and trailers. To solve the problem, a set of mapping functions are learned to project high-dimensional features extracted from data of different media types into a common low-dimensional space so that metric distance measures can be applied. In this paper, we propose an effective mapping mechanism based on deep learning (i.e., stacked auto-encoders) for multi-modal retrieval. Mapping functions are learned by optimizing a new objective function, which captures both intra-modal and inter-modal semantic relationships of data from heterogeneous sources effectively. Compared with previous works which require a substantial amount of prior knowledge such as similarity matrices of intra-modal data and ranking examples, our method requires little prior knowledge. Given a large training dataset, we split it into mini-batches and continually adjust the mapping functions for each batch of input. Hence, our method is memory efficient with respect to the data volume. Experiments on three real datasets illustrate that our proposed method achieves significant improvement in search accuracy over the state-of-the-art methods.", "Nearest neighbor search methods based on hashing have attracted considerable attention for effective and efficient large-scale similarity search in computer vision and information retrieval community. In this paper, we study the problems of learning hash functions in the context of multimodal data for cross-view similarity search. We put forward a novel hashing method, which is referred to Collective Matrix Factorization Hashing (CMFH). CMFH learns unified hash codes by collective matrix factorization with latent factor model from different modalities of one instance, which can not only supports cross-view search but also increases the search accuracy by merging multiple view information sources. We also prove that CMFH, a similarity-preserving hashing learning method, has upper and lower boundaries. Extensive experiments verify that CMFH significantly outperforms several state-of-the-art methods on three different datasets.", "Similarity search methods based on hashing for effective and efficient cross-modal retrieval on large-scale multimedia databases with massive text and images have attracted considerable attention. The core problem of cross-modal hashing is how to effectively construct correlation between multi-modal representations which are heterogeneous intrinsically in the process of hash function learning. Analogous to Canonical Correlation Analysis (CCA), most existing cross-modal hash methods embed the heterogeneous data into a joint abstraction space by linear projections. However, these methods fail to bridge the semantic gap more effectively, and capture high-level latent semantic information which has been proved that it can lead to better performance for image retrieval. To address these challenges, in this paper, we propose a novel Latent Semantic Sparse Hashing (LSSH) to perform cross-modal similarity search by employing Sparse Coding and Matrix Factorization. In particular, LSSH uses Sparse Coding to capture the salient structures of images, and Matrix Factorization to learn the latent concepts from text. Then the learned latent semantic features are mapped to a joint abstraction space. Moreover, an iterative strategy is applied to derive optimal solutions efficiently, and it helps LSSH to explore the correlation between multi-modal representations efficiently and automatically. Finally, the unified hashcodes are generated through the high level abstraction space by quantization. Extensive experiments on three different datasets highlight the advantage of our method under cross-modal scenarios and show that LSSH significantly outperforms several state-of-the-art methods.", "With benefits of low storage costs and high query speeds, hashing methods are widely researched for efficiently retrieving large-scale data, which commonly contains multiple views, e.g. a news report with images, videos and texts. In this paper, we study the problem of cross-view retrieval and propose an effective Semantics-Preserving Hashing method, termed SePH. Given semantic affinities of training data as supervised information, SePH transforms them into a probability distribution and approximates it with to-be-learnt hash codes in Hamming space via minimizing the Kullback-Leibler divergence. Then kernel logistic regression with a sampling strategy is utilized to learn the nonlinear projections from features in each view to the learnt hash codes. And for any unseen instance, predicted hash codes and their corresponding output probabilities from observed views are utilized to determine its unified hash code, using a novel probabilistic approach. Extensive experiments conducted on three benchmark datasets well demonstrate the effectiveness and reasonableness of SePH.", "Similarity search applications with a large amount of text and image data demands an efficient and effective solution. One useful strategy is to represent the examples in databases as compact binary codes through semantic hashing, which has attracted much attention due to its fast query search speed and drastically reduced storage requirement. All of the current semantic hashing methods only deal with the case when each example is represented by one type of features. However, examples are often described from several different information sources in many real world applications. For example, the characteristics of a webpage can be derived from both its content part and its associated links. To address the problem of learning good hashing codes in this scenario, we propose a novel research problem -- Composite Hashing with Multiple Information Sources (CHMIS). The focus of the new research problem is to design an algorithm for incorporating the features from different information sources into the binary hashing codes efficiently and effectively. In particular, we propose an algorithm CHMIS-AW (CHMIS with Adjusted Weights) for learning the codes. The proposed algorithm integrates information from several different sources into the binary hashing codes by adjusting the weights on each individual source for maximizing the coding performance, and enables fast conversion from query examples to their binary hashing codes. Experimental results on five different datasets demonstrate the superior performance of the proposed method against several other state-of-the-art semantic hashing techniques." ] }

{ "cite_N": [ "@cite_37", "@cite_33" ], "mid": [ "1780444626", "2267050401" ], "abstract": [ "Efficient similarity retrieval from large-scale multimodal database is pervasive in current search systems with the big data tidal wave. To support queries across content modalities, the system should enable cross-modal correlation and computation-efficient indexing. While hashing methods have shown great potential in approaching this goal, current attempts generally failed to learn isomorphic hash codes in a seamless scheme, that is, they embed multiple modalities into a continuous isomorphic space and then threshold embeddings into binary codes, which incurred substantial loss of search quality. In this paper, we establish seamless multimodal hashing by proposing a novel Compositional Correlation Quantization (CCQ) model. Specifically, CCQ jointly finds correlation-maximal mappings that transform different modalities into an isomorphic latent space, and learns compositional quantizers that quantize the isomorphic latent features into compact binary codes. An optimization framework is developed to preserve both intra-modal similarity and inter-modal correlation while minimizing both reconstruction and quantization errors, which can be trained from both paired and unpaired data in linear time. A comprehensive set of experiments clearly show the superior effectiveness and efficiency of CCQ against the state-of-the-art techniques on both unimodal and cross-modal search tasks.", "Cross-modal hashing is designed to facilitate fast search across domains. In this work, we present a cross-modal hashing approach, called quantized correlation hashing (QCH), which takes into consideration the quantization loss over domains and the relation between domains. Unlike previous approaches that separate the optimization of the quantizer independent of maximization of domain correlation, our approach simultaneously optimizes both processes. The underlying relation between the domains that describes the same objects is established via maximizing the correlation between the hash codes across the domains. The resulting multi-modal objective function is transformed to a unimodal formalization, which is optimized through an alternative procedure. Experimental results on three real world datasets demonstrate that our approach outperforms the state-of-the-art multi-modal hashing methods." ] }

{ "cite_N": [ "@cite_41", "@cite_59", "@cite_57", "@cite_12" ], "mid": [ "2058013187", "2153579005", "2019731274", "1880262756" ], "abstract": [ "Latent semantic analysis (LSA) approximates human understanding of relations between word and passage meanings in a wide variety of ways. Keywords: LSA; machine learning; semantics; induction; meaning", "The recently introduced continuous Skip-gram model is an efficient method for learning high-quality distributed vector representations that capture a large number of precise syntactic and semantic word relationships. In this paper we present several extensions that improve both the quality of the vectors and the training speed. By subsampling of the frequent words we obtain significant speedup and also learn more regular word representations. We also describe a simple alternative to the hierarchical softmax called negative sampling. An inherent limitation of word representations is their indifference to word order and their inability to represent idiomatic phrases. For example, the meanings of \"Canada\" and \"Air\" cannot be easily combined to obtain \"Air Canada\". Motivated by this example, we present a simple method for finding phrases in text, and show that learning good vector representations for millions of phrases is possible.", "Abstract Classification is an established data mining problem that has largely been investigated by the research community. Since the raw data is commonly unsuitable for training a classifier as it is, several preprocessing steps are commonly integrated in the data mining and knowledge discovery process before applying classification. This paper investigates the usefulness of integrating taxonomy information into classifier construction. In particular, it presents a general-purpose strategy to improve structured data classification accuracy by enriching data with semantics-based knowledge provided by a taxonomy (i.e., a set of is-a hierarchies) built over data items. The proposed approach may be deemed particularly useful by experts who could directly access or easily infer meaningful taxonomy models over the analyzed data. To demonstrate the benefit obtained from utilizing taxonomies for contemporary classification methods, we also presented a generalized version of a state-of-the-art associative classifier, which also includes generalized (high level) rules in the classification model. Experiments show the effectiveness of the proposed approach in improving the accuracy of state-of-art classifiers, associative and not.", "We describe latent Dirichlet allocation (LDA), a generative probabilistic model for collections of discrete data such as text corpora. LDA is a three-level hierarchical Bayesian model, in which each item of a collection is modeled as a finite mixture over an underlying set of topics. Each topic is, in turn, modeled as an infinite mixture over an underlying set of topic probabilities. In the context of text modeling, the topic probabilities provide an explicit representation of a document. We present efficient approximate inference techniques based on variational methods and an EM algorithm for empirical Bayes parameter estimation. We report results in document modeling, text classification, and collaborative filtering, comparing to a mixture of unigrams model and the probabilistic LSI model." ] }

{ "cite_N": [ "@cite_9", "@cite_27", "@cite_43" ], "mid": [ "2905345073", "2250086655", "" ], "abstract": [ "Abstract Networked data is data composed of network objects and links. Network objects are characterized by high dimensional attributes and by links indicating the relationships among these objects. However, traditional feature selection and feature extraction methods consider only attribute information, thus ignoring link information. In the presented work, we propose a new unsupervised binary feature construction method (NetBFC) for networked data that reconstructs attributes for each object by exploiting link information. By exploring similar objects in the network and associating them, our method increases the similarities between objects with high probability of being in the same group. The proposed method enables local attribute enrichment and local attribute selection for each object by aggregating the attributes of similar objects in order to deal with the sparsity of networked data. In addition, this method applies an attribute elimination phase to eliminate irrelevant and redundant attributes which decrease the performance of clustering algorithms. Experimental results on real-world data sets indicate that NetBFC significantly achieves better performance when compared to baseline methods.", "This research book provides the reader with a selection of high-quality texts dedicated to current progress, new developments and research trends in feature selection for data and pattern recognition. Even though it has been the subject of interest for some time, feature selection remains one of actively pursued avenues of investigations due to its importance and bearing upon other problems and tasks. This volume points to a number of advances topically subdivided into four parts: estimation of importance of characteristic features, their relevance, dependencies, weighting and ranking; rough set approach to attribute reduction with focus on relative reducts; construction of rules and their evaluation; and data- and domain-oriented methodologies.", "" ] }

{ "cite_N": [ "@cite_46", "@cite_64" ], "mid": [ "1493357981", "2167101736" ], "abstract": [ "We summarise various ways of performing dimensionality reduction on high-dimensional microarray data. Many different feature selection and feature extraction methods exist and they are being widely used. All these methods aim to remove redundant and irrelevant features so that classification of new instances will be more accurate. A popular source of data is microarrays, a biological platform for gathering gene expressions. Analysing microarrays can be difficult due to the size of the data they provide. In addition the complicated relations among the different genes make analysis more difficult and removing excess features can improve the quality of the results. We present some of the most popular methods for selecting significant features and provide a comparison between them. Their advantages and disadvantages are outlined in order to provide a clearer idea of when to use each one of them for saving computational time and resources.", "Plenty of feature selection methods are available in literature due to the availability of data with hundreds of variables leading to data with very high dimension. Feature selection methods provides us a way of reducing computation time, improving prediction performance, and a better understanding of the data in machine learning or pattern recognition applications. In this paper we provide an overview of some of the methods present in literature. The objective is to provide a generic introduction to variable elimination which can be applied to a wide array of machine learning problems. We focus on Filter, Wrapper and Embedded methods. We also apply some of the feature selection techniques on standard datasets to demonstrate the applicability of feature selection techniques." ] }

{ "cite_N": [ "@cite_30", "@cite_18", "@cite_26", "@cite_53", "@cite_24", "@cite_5" ], "mid": [ "2743104969", "2962756421", "2964015378", "2777416523", "2607500032", "2962767366" ], "abstract": [ "We study the problem of representation learning in heterogeneous networks. Its unique challenges come from the existence of multiple types of nodes and links, which limit the feasibility of the conventional network embedding techniques. We develop two scalable representation learning models, namely metapath2vec and metapath2vec++. The metapath2vec model formalizes meta-path-based random walks to construct the heterogeneous neighborhood of a node and then leverages a heterogeneous skip-gram model to perform node embeddings. The metapath2vec++ model further enables the simultaneous modeling of structural and semantic correlations in heterogeneous networks. Extensive experiments show that metapath2vec and metapath2vec++ are able to not only outperform state-of-the-art embedding models in various heterogeneous network mining tasks, such as node classification, clustering, and similarity search, but also discern the structural and semantic correlations between diverse network objects.", "Prediction tasks over nodes and edges in networks require careful effort in engineering features used by learning algorithms. Recent research in the broader field of representation learning has led to significant progress in automating prediction by learning the features themselves. However, present feature learning approaches are not expressive enough to capture the diversity of connectivity patterns observed in networks. Here we propose node2vec, an algorithmic framework for learning continuous feature representations for nodes in networks. In node2vec, we learn a mapping of nodes to a low-dimensional space of features that maximizes the likelihood of preserving network neighborhoods of nodes. We define a flexible notion of a node's network neighborhood and design a biased random walk procedure, which efficiently explores diverse neighborhoods. Our algorithm generalizes prior work which is based on rigid notions of network neighborhoods, and we argue that the added flexibility in exploring neighborhoods is the key to learning richer representations. We demonstrate the efficacy of node2vec over existing state-of-the-art techniques on multi-label classification and link prediction in several real-world networks from diverse domains. Taken together, our work represents a new way for efficiently learning state-of-the-art task-independent representations in complex networks.", "We present a scalable approach for semi-supervised learning on graph-structured data that is based on an efficient variant of convolutional neural networks which operate directly on graphs. We motivate the choice of our convolutional architecture via a localized first-order approximation of spectral graph convolutions. Our model scales linearly in the number of graph edges and learns hidden layer representations that encode both local graph structure and features of nodes. In a number of experiments on citation networks and on a knowledge graph dataset we demonstrate that our approach outperforms related methods by a significant margin.", "Inspired by natural language processing techniques, we here introduce Mol2vec, which is an unsupervised machine learning approach to learn vector representations of molecular substructures. Like the Word2vec models, where vectors of closely related words are in close proximity in the vector space, Mol2vec learns vector representations of molecular substructures that point in similar directions for chemically related substructures. Compounds can finally be encoded as vectors by summing the vectors of the individual substructures and, for instance, be fed into supervised machine learning approaches to predict compound properties. The underlying substructure vector embeddings are obtained by training an unsupervised machine learning approach on a so-called corpus of compounds that consists of all available chemical matter. The resulting Mol2vec model is pretrained once, yields dense vector representations, and overcomes drawbacks of common compound feature representations such as sparseness and bit collision...", "Structural identity is a concept of symmetry in which network nodes are identified according to the network structure and their relationship to other nodes. Structural identity has been studied in theory and practice over the past decades, but only recently has it been addressed with representational learning techniques. This work presents struc2vec, a novel and flexible framework for learning latent representations for the structural identity of nodes. struc2vec uses a hierarchy to measure node similarity at different scales, and constructs a multilayer graph to encode structural similarities and generate structural context for nodes. Numerical experiments indicate that state-of-the-art techniques for learning node representations fail in capturing stronger notions of structural identity, while struc2vec exhibits much superior performance in this task, as it overcomes limitations of prior approaches. As a consequence, numerical experiments indicate that struc2vec improves performance on classification tasks that depend more on structural identity.", "Low-dimensional embeddings of nodes in large graphs have proved extremely useful in a variety of prediction tasks, from content recommendation to identifying protein functions. However, most existing approaches require that all nodes in the graph are present during training of the embeddings; these previous approaches are inherently transductive and do not naturally generalize to unseen nodes. Here we present GraphSAGE, a general, inductive framework that leverages node feature information (e.g., text attributes) to efficiently generate node embeddings. Instead of training individual embeddings for each node, we learn a function that generates embeddings by sampling and aggregating features from a node's local neighborhood. Our algorithm outperforms strong baselines on three inductive node-classification benchmarks: we classify the category of unseen nodes in evolving information graphs based on citation and Reddit post data, and we show that our algorithm generalizes to completely unseen graphs using a multi-graph dataset of protein-protein interactions." ] }

{ "cite_N": [ "@cite_0", "@cite_5", "@cite_7" ], "mid": [ "", "2028949045", "1969724971" ], "abstract": [ "", "An adaptive remeshing procedure based on a cell volume deformation method is presented. Starting with an initial grid, this method offers direct cell volume control through the specification of the transformation Jacobian. Grid points are moved with appropriate grid velocities so that the specified cell volume distribution can be achieved at the end of the grid movement without adding or removing grid points. The grid velocities are determined by solving a scalar Poisson equation. This method is applied to solving the compressible Euler equations. Computational test cases of transonic flow over an airfoil are presented and demonstrate the desired control of grid sizes across shock waves.", "A new method for generating adaptive moving grids is formulated based on physical quantities. Level set functions are used to construct the adaptive grids, which are solutions of the standard level set evolution equation with the Cartesian coordinates as initial values. The intersection points of the level sets of the evolving functions form a new grid at each time. The velocity vector in the evolution equation is chosen according to a monitor function and is equal to the node velocity. A uniform grid is then deformed to a moving grid with desired cell volume distribution at each time. The method achieves precise control over the Jacobian determinant of the grid mapping as the traditional deformation method does. The new method is consistent with the level set approach to dynamic moving interface problems." ] }

{ "cite_N": [ "@cite_15" ], "mid": [ "1437816530" ], "abstract": [ "Adaptive grid generation is an active research topic for numer- ical solution of differential equations. In this paper, we propose a variational method which generates transformations with prescribed Jacobian determinant and curl. Then we use this transformation to achieve adaptive grid generation task, and show the importance of curl in a transformation." ] }

{ "cite_N": [ "@cite_4" ], "mid": [ "2158441668" ], "abstract": [ "Forecasting in power systems has been made considerably more complex by the introduction of competitive electricity markets. Furthermore, new variables need to be predicted by various market participants. This paper shows how a new methodology that combines classical and data mining techniques can be used to forecast the system imbalance volume, a key variable for the system operator in the market of England and Wales under the New Electricity Trading Arrangements (NETA)." ] }

{ "cite_N": [ "@cite_37", "@cite_7", "@cite_6", "@cite_24", "@cite_43", "@cite_45" ], "mid": [ "2115322217", "2251654079", "", "2118119027", "2251656952", "" ], "abstract": [ "Sentence compression holds promise for many applications ranging from summarization to subtitle generation. Our work views sentence compression as an optimization problem and uses integer linear programming (ILP) to infer globally optimal compressions in the presence of linguistically motivated constraints. We show how previous formulations of sentence compression can be recast as ILPs and extend these models with novel global constraints. Experimental results on written and spoken texts demonstrate improvements over state-of-the-art models.", "We present an LSTM approach to deletion-based sentence compression where the task is to translate a sentence into a sequence of zeros and ones, corresponding to token deletion decisions. We demonstrate that even the most basic version of the system, which is given no syntactic information (no PoS or NE tags, or dependencies) or desired compression length, performs surprisingly well: around 30 of the compressions from a large test set could be regenerated. We compare the LSTM system with a competitive baseline which is trained on the same amount of data but is additionally provided with all kinds of linguistic features. In an experiment with human raters the LSTMbased model outperforms the baseline achieving 4.5 in readability and 3.8 in informativeness.", "", "When humans produce summaries of documents, they do not simply extract sentences and concatenate them. Rather, they create new sentences that are grammatical, that cohere with one another, and that capture the most salient pieces of information in the original document. Given that large collections of text abstract pairs are available online, it is now possible to envision algorithms that are trained to mimic this process. In this paper, we focus on sentence compression, a simpler version of this larger challenge. We aim to achieve two goals simultaneously:our compressions should be grammatical, and they should retain the most important pieces of information. These two goals can conflict. We devise both noisy-channel and decision-tree approaches to the problem, and we evaluate results against manual compressions and a simple baseline.", "A major challenge in supervised sentence compression is making use of rich feature representations because of very scarce parallel data. We address this problem and present a method to automatically build a compression corpus with hundreds of thousands of instances on which deletion-based algorithms can be trained. In our corpus, the syntactic trees of the compressions are subtrees of their uncompressed counterparts, and hence supervised systems which require a structural alignment between the input and output can be successfully trained. We also extend an existing unsupervised compression method with a learning module. The new system uses structured prediction to learn from lexical, syntactic and other features. An evaluation with human raters shows that the presented data harvesting method indeed produces a parallel corpus of high quality. Also, the supervised system trained on this corpus gets high scores both from human raters and in an automatic evaluation setting, significantly outperforming a strong baseline.", "" ] }

{ "cite_N": [ "@cite_4", "@cite_28", "@cite_40", "@cite_15", "@cite_16" ], "mid": [ "2592205058", "", "2251930319", "2531882892", "2806120502" ], "abstract": [ "Previous investigations into the validity of acceptability judgment data have focused almost exclusively on type I errors (or false positives) because of the consequences of such errors for syntactic theories (Sprouse & Almeida 2012; 2013). The current study complements these previous studies by systematically investigating the type II error rate (false negatives), or equivalently, the statistical power , of a wide cross-section of possible acceptability judgment experiments. Though type II errors have historically been assumed to be less costly than type I errors, the dynamics of scientific publishing mean that high type II error rates (i.e., studies with low statistical power) can lead to increases in type I error rates in a given field of study. We present a set of experiments and resampling simulations to estimate statistical power for four tasks (forced-choice, Likert scale, magnitude estimation, and yes-no), 50 effect sizes instantiated by real phenomena, sample sizes from 5 to 100 participants, and two approaches to statistical analysis (null hypothesis and Bayesian). Our goals are twofold (i) to provide a fuller picture of the status of acceptability judgment data in syntax, and (ii) to provide detailed information that syntacticians can use to design and evaluate the sensitivity of acceptability judgment experiments in their own research.", "", "Automated methods for identifying whether sentences are grammatical have various potential applications (e.g., machine translation, automated essay scoring, computer-assisted language learning). In this work, we construct a statistical model of grammaticality using various linguistic features (e.g., misspelling counts, parser outputs, n-gram language model scores). We also present a new publicly available dataset of learner sentences judged for grammaticality on an ordinal scale. In evaluations, we compare our system to the one from Post (2011) and find that our approach yields state-of-the-art performance.", "The question of whether humans represent grammatical knowledge as a binary condition on membership in a set of well-formed sentences, or as a probabilistic property has been the subject of debate among linguists, psychologists, and cognitive scientists for many decades. Acceptability judgments present a serious problem for both classical binary and probabilistic theories of grammaticality. These judgements are gradient in nature, and so cannot be directly accommodated in a binary formal grammar. However, it is also not possible to simply reduce acceptability to probability. The acceptability of a sentence is not the same as the likelihood of its occurrence, which is, in part, determined by factors like sentence length and lexical frequency. In this paper, we present the results of a set of large-scale experiments using crowd-sourced acceptability judgments that demonstrate gradience to be a pervasive feature in acceptability judgments. We then show how one can predict acceptability judgments on the basis of probability by augmenting probabilistic language models with an acceptability measure. This is a function that normalizes probability values to eliminate the confounding factors of length and lexical frequency. We describe a sequence of modeling experiments with unsupervised language models drawn from state-of-the-art machine learning methods in natural language processing. Several of these models achieve very encouraging levels of accuracy in the acceptability prediction task, as measured by the correlation between the acceptability measure scores and mean human acceptability values. We consider the relevance of these results to the debate on the nature of grammatical competence, and we argue that they support the view that linguistic knowledge can be intrinsically probabilistic.", "In this work, we explore the ability of artificial neural networks to judge the grammatical acceptability of a sentence. Machine learning research of this kind is well placed to answer important open questions about the role of prior linguistic bias in language acquisition by providing a test for the Poverty of the Stimulus Argument. In service of this goal, we introduce the Corpus of Linguistic Acceptability (CoLA), a set of 10,657 English sentences labeled as grammatical or ungrammatical by expert linguists. We train several recurrent neural networks to do binary acceptability classification. These models set a baseline for the task. Error-analysis testing the models on specific grammatical phenomena reveals that they learn some systematic grammatical generalizations like subject-verb-object word order without any grammatical supervision. We find that neural sequence models show promise on the acceptability classification task. However, human-like performance across a wide range of grammatical constructions remains far off." ] }

{ "cite_N": [ "@cite_3", "@cite_2" ], "mid": [ "2040713190", "2124479173" ], "abstract": [ "A grammar can be regarded as a device that enumerates the sentences of a language. We study a sequence of restrictions that limit grammars first to Turing machines, then to two types of system from which a phrase structure description of the generated language can be drawn, and finally to finite state IV[arkov sources (finite automata). These restrictions are shown to be increasingly heavy in the sense that the languages that can be generated by grammars meeting a given restriction constitute a proper subset of those that can be generated by grammars meeting the preceding restriction. Various formulations of phrase structure description are considered, and the source of their excess generative power over finite state sources is investigated in greater detail. SECTION 1", "We investigate several conceptions of linguistic structure to determine whether or not they can provide simple and \"revealing\" grammars that generate all of the sentences of English and only these. We find that no finite-state Markov process that produces symbols with transition from state to state can serve as an English grammar. Furthermore, the particular subclass of such processes that produce n -order statistical approximations to English do not come closer, with increasing n , to matching the output of an English grammar. We formalize-the notions of \"phrase structure\" and show that this gives us a method for describing language which is essentially more powerful, though still representable as a rather elementary type of finite-state process. Nevertheless, it is successful only when limited to a small subset of simple sentences. We study the formal properties of a set of grammatical transformations that carry sentences with phrase structure into new sentences with derived phrase structure, showing that transformational grammars are processes of the same elementary type as phrase-structure grammars; that the grammar of English is materially simplified if phrase structure description is limited to a kernel of simple sentences from which all other sentences are constructed by repeated transformations; and that this view of linguistic structure gives a certain insight into the use and understanding of language." ] }

{ "cite_N": [ "@cite_36", "@cite_44", "@cite_40", "@cite_27", "@cite_23", "@cite_51", "@cite_11" ], "mid": [ "2086504823", "2221852422", "2143321506", "2164338181", "2134514757", "1992371516", "1956333070" ], "abstract": [ "For many computer vision and machine learning problems, large training sets are key for good performance. However, the most computationally expensive part of many computer vision and machine learning algorithms consists of finding nearest neighbor matches to high dimensional vectors that represent the training data. We propose new algorithms for approximate nearest neighbor matching and evaluate and compare them with previous algorithms. For matching high dimensional features, we find two algorithms to be the most efficient: the randomized k-d forest and a new algorithm proposed in this paper, the priority search k-means tree. We also propose a new algorithm for matching binary features by searching multiple hierarchical clustering trees and show it outperforms methods typically used in the literature. We show that the optimal nearest neighbor algorithm and its parameters depend on the data set characteristics and describe an automated configuration procedure for finding the best algorithm to search a particular data set. In order to scale to very large data sets that would otherwise not fit in the memory of a single machine, we propose a distributed nearest neighbor matching framework that can be used with any of the algorithms described in the paper. All this research has been released as an open source library called fast library for approximate nearest neighbors (FLANN), which has been incorporated into OpenCV and is now one of the most popular libraries for nearest neighbor matching.", "We propose a method for learning similarity-preserving hash functions that map high-dimensional data onto binary codes. The formulation is based on structured prediction with latent variables and a hinge-like loss function. It is efficient to train for large datasets, scales well to large code lengths, and outperforms state-of-the-art methods.", "Most existing approaches to hashing apply a single form of hash function, and an optimization process which is typically deeply coupled to this specific form. This tight coupling restricts the flexibility of the method to respond to the data, and can result in complex optimization problems that are difficult to solve. Here we propose a flexible yet simple framework that is able to accommodate different types of loss functions and hash functions. This framework allows a number of existing approaches to hashing to be placed in context, and simplifies the development of new problem-specific hashing methods. Our framework decomposes the hashing learning problem into two steps: hash bit learning and hash function learning based on the learned bits. The first step can typically be formulated as binary quadratic problems, and the second step can be accomplished by training standard binary classifiers. Both problems have been extensively studied in the literature. Our extensive experiments demonstrate that the proposed framework is effective, flexible and outperforms the state-of-the-art.", "Fast retrieval methods are increasingly critical for many large-scale analysis tasks, and there have been several recent methods that attempt to learn hash functions for fast and accurate nearest neighbor searches. In this paper, we develop an algorithm for learning hash functions based on explicitly minimizing the reconstruction error between the original distances and the Hamming distances of the corresponding binary embeddings. We develop a scalable coordinate-descent algorithm for our proposed hashing objective that is able to efficiently learn hash functions in a variety of settings. Unlike existing methods such as semantic hashing and spectral hashing, our method is easily kernelized and does not require restrictive assumptions about the underlying distribution of the data. We present results over several domains to demonstrate that our method outperforms existing state-of-the-art techniques.", "SIFT-like local feature descriptors are ubiquitously employed in computer vision applications such as content-based retrieval, video analysis, copy detection, object recognition, photo tourism, and 3D reconstruction. Feature descriptors can be designed to be invariant to certain classes of photometric and geometric transformations, in particular, affine and intensity scale transformations. However, real transformations that an image can undergo can only be approximately modeled in this way, and thus most descriptors are only approximately invariant in practice. Second, descriptors are usually high dimensional (e.g., SIFT is represented as a 128-dimensional vector). In large-scale retrieval and matching problems, this can pose challenges in storing and retrieving descriptor data. We map the descriptor vectors into the Hamming space in which the Hamming metric is used to compare the resulting representations. This way, we reduce the size of the descriptors by representing them as short binary strings and learn descriptor invariance from examples. We show extensive experimental validation, demonstrating the advantage of the proposed approach.", "Recent years have witnessed the growing popularity of hashing in large-scale vision problems. It has been shown that the hashing quality could be boosted by leveraging supervised information into hash function learning. However, the existing supervised methods either lack adequate performance or often incur cumbersome model training. In this paper, we propose a novel kernel-based supervised hashing model which requires a limited amount of supervised information, i.e., similar and dissimilar data pairs, and a feasible training cost in achieving high quality hashing. The idea is to map the data to compact binary codes whose Hamming distances are minimized on similar pairs and simultaneously maximized on dissimilar pairs. Our approach is distinct from prior works by utilizing the equivalence between optimizing the code inner products and the Hamming distances. This enables us to sequentially and efficiently train the hash functions one bit at a time, yielding very short yet discriminative codes. We carry out extensive experiments on two image benchmarks with up to one million samples, demonstrating that our approach significantly outperforms the state-of-the-arts in searching both metric distance neighbors and semantically similar neighbors, with accuracy gains ranging from 13 to 46 .", "In this paper, we propose a new deep hashing (DH) approach to learn compact binary codes for large scale visual search. Unlike most existing binary codes learning methods which seek a single linear projection to map each sample into a binary vector, we develop a deep neural network to seek multiple hierarchical non-linear transformations to learn these binary codes, so that the nonlinear relationship of samples can be well exploited. Our model is learned under three constraints at the top layer of the deep network: 1) the loss between the original real-valued feature descriptor and the learned binary vector is minimized, 2) the binary codes distribute evenly on each bit, and 3) different bits are as independent as possible. To further improve the discriminative power of the learned binary codes, we extend DH into supervised DH (SDH) by including one discriminative term into the objective function of DH which simultaneously maximizes the inter-class variations and minimizes the intra-class variations of the learned binary codes. Experimental results show the superiority of the proposed approach over the state-of-the-arts." ] }

{ "cite_N": [ "@cite_30", "@cite_38", "@cite_1", "@cite_3" ], "mid": [ "2113307832", "1923967535", "2089632823", "2126210882" ], "abstract": [ "Motivated by large-scale multimedia applications we propose to learn mappings from high-dimensional data to binary codes that preserve semantic similarity. Binary codes are well suited to large-scale applications as they are storage efficient and permit exact sub-linear kNN search. The framework is applicable to broad families of mappings, and uses a flexible form of triplet ranking loss. We overcome discontinuous optimization of the discrete mappings by minimizing a piecewise-smooth upper bound on empirical loss, inspired by latent structural SVMs. We develop a new loss-augmented inference algorithm that is quadratic in the code length. We show strong retrieval performance on CIFAR-10 and MNIST, with promising classification results using no more than kNN on the binary codes.", "With the rapid growth of web images, hashing has received increasing interests in large scale image retrieval. Research efforts have been devoted to learning compact binary codes that preserve semantic similarity based on labels. However, most of these hashing methods are designed to handle simple binary similarity. The complex multi-level semantic structure of images associated with multiple labels have not yet been well explored. Here we propose a deep semantic ranking based method for learning hash functions that preserve multilevel semantic similarity between multi-label images. In our approach, deep convolutional neural network is incorporated into hash functions to jointly learn feature representations and mappings from them to hash codes, which avoids the limitation of semantic representation power of hand-crafted features. Meanwhile, a ranking list that encodes the multilevel similarity information is employed to guide the learning of such deep hash functions. An effective scheme based on surrogate loss is used to solve the intractable optimization problem of nonsmooth and multivariate ranking measures involved in the learning procedure. Experimental results show the superiority of our proposed approach over several state-of-the-art hashing methods in term of ranking evaluation metrics when tested on multi-label image datasets.", "In this paper, we propose a novel method to learn similarity-preserving hash functions for approximate nearest neighbor (NN) search. The key idea is to learn hash functions by maximizing the alignment between the similarity orders computed from the original space and the ones in the hamming space. The problem of mapping the NN points into different hash codes is taken as a classification problem in which the points are categorized into several groups according to the hamming distances to the query. The hash functions are optimized from the classifiers pooled over the training points. Experimental results demonstrate the superiority of our approach over existing state-of-the-art hashing techniques.", "Hashing techniques have been intensively investigated in the design of highly efficient search engines for large-scale computer vision applications. Compared with prior approximate nearest neighbor search approaches like tree-based indexing, hashing-based search schemes have prominent advantages in terms of both storage and computational efficiencies. Moreover, the procedure of devising hash functions can be easily incorporated into sophisticated machine learning tools, leading to data-dependent and task-specific compact hash codes. Therefore, a number of learning paradigms, ranging from unsupervised to supervised, have been applied to compose appropriate hash functions. However, most of the existing hash function learning methods either treat hash function design as a classification problem or generate binary codes to satisfy pair wise supervision, and have not yet directly optimized the search accuracy. In this paper, we propose to leverage list wise supervision into a principled hash function learning framework. In particular, the ranking information is represented by a set of rank triplets that can be used to assess the quality of ranking. Simple linear projection-based hash functions are solved efficiently through maximizing the ranking quality over the training data. We carry out experiments on large image datasets with size up to one million and compare with the state-of-the-art hashing techniques. The extensive results corroborate that our learned hash codes via list wise supervision can provide superior search accuracy without incurring heavy computational overhead." ] }

{ "cite_N": [ "@cite_25" ], "mid": [ "1910300841" ], "abstract": [ "Recently, learning based hashing techniques have attracted broad research interests because they can support efficient storage and retrieval for high-dimensional data such as images, videos, documents, etc. However, a major difficulty of learning to hash lies in handling the discrete constraints imposed on the pursued hash codes, which typically makes hash optimizations very challenging (NP-hard in general). In this work, we propose a new supervised hashing framework, where the learning objective is to generate the optimal binary hash codes for linear classification. By introducing an auxiliary variable, we reformulate the objective such that it can be solved substantially efficiently by employing a regularization algorithm. One of the key steps in this algorithm is to solve a regularization sub-problem associated with the NP-hard binary optimization. We show that the sub-problem admits an analytical solution via cyclic coordinate descent. As such, a high-quality discrete solution can eventually be obtained in an efficient computing manner, therefore enabling to tackle massive datasets. We evaluate the proposed approach, dubbed Supervised Discrete Hashing (SDH), on four large image datasets and demonstrate its superiority to the state-of-the-art hashing methods in large-scale image retrieval." ] }

{ "cite_N": [ "@cite_15", "@cite_34", "@cite_39" ], "mid": [ "138284169", "", "2124509324" ], "abstract": [ "This paper presents a novel compact coding approach, composite quantization, for approximate nearest neighbor search. The idea is to use the composition of several elements selected from the dictionaries to accurately approximate a vector and to represent the vector by a short code composed of the indices of the selected elements. To efficiently compute the approximate distance of a query to a database vector using the short code, we introduce an extra constraint, constant inter-dictionary-element-product, resulting in that approximating the distance only using the distance of the query to each selected element is enough for nearest neighbor search. Experimental comparisonwith state-of-the-art algorithms over several benchmark datasets demonstrates the efficacy of the proposed approach.", "", "This paper introduces a product quantization-based approach for approximate nearest neighbor search. The idea is to decompose the space into a Cartesian product of low-dimensional subspaces and to quantize each subspace separately. A vector is represented by a short code composed of its subspace quantization indices. The euclidean distance between two vectors can be efficiently estimated from their codes. An asymmetric version increases precision, as it computes the approximate distance between a vector and a code. Experimental results show that our approach searches for nearest neighbors efficiently, in particular in combination with an inverted file system. Results for SIFT and GIST image descriptors show excellent search accuracy, outperforming three state-of-the-art approaches. The scalability of our approach is validated on a data set of two billion vectors." ] }

{ "cite_N": [ "@cite_11", "@cite_25", "@cite_2" ], "mid": [ "2516591743", "2809670082", "" ], "abstract": [ "Training directed neural networks typically requires forward-propagating data through a computation graph, followed by backpropagating error signal, to produce weight updates. All layers, or more generally, modules, of the network are therefore locked, in the sense that they must wait for the remainder of the network to execute forwards and propagate error backwards before they can be updated. In this work we break this constraint by decoupling modules by introducing a model of the future computation of the network graph. These models predict what the result of the modelled subgraph will produce using only local information. In particular we focus on modelling error gradients: by using the modelled synthetic gradient in place of true backpropagated error gradients we decouple subgraphs, and can update them independently and asynchronously i.e. we realise decoupled neural interfaces. We show results for feed-forward models, where every layer is trained asynchronously, recurrent neural networks (RNNs) where predicting one's future gradient extends the time over which the RNN can effectively model, and also a hierarchical RNN system with ticking at different timescales. Finally, we demonstrate that in addition to predicting gradients, the same framework can be used to predict inputs, resulting in models which are decoupled in both the forward and backwards pass -- amounting to independent networks which co-learn such that they can be composed into a single functioning corporation.", "We propose and analyze a new family of algorithms for training neural networks with ReLU activations. Our algorithms are based on the technique of alternating minimization: estimating the activation patterns of each ReLU for all given samples, interleaved with weight updates via a least-squares step. The main focus of our paper are 1-hidden layer networks with @math hidden neurons and ReLU activation. We show that under standard distributional assumptions on the @math dimensional input data, our algorithm provably recovers the true ground truth' parameters in a linearly convergent fashion. This holds as long as the weights are sufficiently well initialized; furthermore, our method requires only @math samples. We also analyze the special case of 1-hidden layer networks with skipped connections, commonly used in ResNet-type architectures, and propose a novel initialization strategy for the same. For ReLU based ResNet type networks, we provide the first linear convergence guarantee with an end-to-end algorithm. We also extend this framework to deeper networks and empirically demonstrate its convergence to a global minimum.", "" ] }

{ "cite_N": [ "@cite_22" ], "mid": [ "2952489973" ], "abstract": [ "Alternating minimization represents a widely applicable and empirically successful approach for finding low-rank matrices that best fit the given data. For example, for the problem of low-rank matrix completion, this method is believed to be one of the most accurate and efficient, and formed a major component of the winning entry in the Netflix Challenge. In the alternating minimization approach, the low-rank target matrix is written in a bi-linear form, i.e. @math ; the algorithm then alternates between finding the best @math and the best @math . Typically, each alternating step in isolation is convex and tractable. However the overall problem becomes non-convex and there has been almost no theoretical understanding of when this approach yields a good result. In this paper we present first theoretical analysis of the performance of alternating minimization for matrix completion, and the related problem of matrix sensing. For both these problems, celebrated recent results have shown that they become well-posed and tractable once certain (now standard) conditions are imposed on the problem. We show that alternating minimization also succeeds under similar conditions. Moreover, compared to existing results, our paper shows that alternating minimization guarantees faster (in particular, geometric) convergence to the true matrix, while allowing a simpler analysis." ] }

{ "cite_N": [ "@cite_14", "@cite_19", "@cite_20", "@cite_13", "@cite_12" ], "mid": [ "2964115671", "", "1606458877", "1931823119", "1520121841" ], "abstract": [ "Artificial neural networks are most commonly trained with the back-propagation algorithm, where the gradient for learning is provided by back-propagating the error, layer by layer, from the output layer to the hidden layers. A recently discovered method called feedback-alignment shows that the weights used for propagating the error backward don't have to be symmetric with the weights used for propagation the activation forward. In fact, random feedback weights work evenly well, because the network learns how to make the feedback useful. In this work, the feedback alignment principle is used for training hidden layers more independently from the rest of the network, and from a zero initial condition. The error is propagated through fixed random feedback connections directly from the output layer to each hidden layer. This simple method is able to achieve zero training error even in convolutional networks and very deep networks, completely without error back-propagation. The method is a step towards biologically plausible machine learning because the error signal is almost local, and no symmetric or reciprocal weights are required. Experiments show that the test performance on MNIST and CIFAR is almost as good as those obtained with back-propagation for fully connected networks. If combined with dropout, the method achieves 1.45 error on the permutation invariant MNIST task.", "", "We propose to exploit reconstruction as a layer-local training signal for deep learning. Reconstructions can be propagated in a form of target propagation playing a role similar to back-propagation but helping to reduce the reliance on derivatives in order to perform credit assignment across many levels of possibly strong non-linearities (which is difficult for back-propagation). A regularized auto-encoder tends produce a reconstruction that is a more likely version of its input, i.e., a small move in the direction of higher likelihood. By generalizing gradients, target propagation may also allow to train deep networks with discrete hidden units. If the auto-encoder takes both a representation of input and target (or of any side information) in input, then its reconstruction of input representation provides a target towards a representation that is more likely, conditioned on all the side information. A deep auto-encoder decoding path generalizes gradient propagation in a learned way that can could thus handle not just infinitesimal changes but larger, discrete changes, hopefully allowing credit assignment through a long chain of non-linear operations. In addition to each layer being a good auto-encoder, the encoder also learns to please the upper layers by transforming the data into a space where it is easier to model by them, flattening manifolds and disentangling factors. The motivations and theoretical justifications for this approach are laid down in this paper, along with conjectures that will have to be verified either mathematically or experimentally, including a hypothesis stating that such auto-encoder mediated target propagation could play in brains the role of credit assignment through many non-linear, noisy and discrete transformations.", "The brain processes information through many layers of neurons. This deep architecture is representationally powerful, but it complicates learning by making it hard to identify the responsible neurons when a mistake is made. In machine learning, the backpropagation algorithm assigns blame to a neuron by computing exactly how it contributed to an error. To do this, it multiplies error signals by matrices consisting of all the synaptic weights on the neuron's axon and farther downstream. This operation requires a precisely choreographed transport of synaptic weight information, which is thought to be impossible in the brain. Here we present a surprisingly simple algorithm for deep learning, which assigns blame by multiplying error signals by random synaptic weights. We show that a network can learn to extract useful information from signals sent through these random feedback connections. In essence, the network learns to learn. We demonstrate that this new mechanism performs as quickly and accurately as backpropagation on a variety of problems and describe the principles which underlie its function. Our demonstration provides a plausible basis for how a neuron can be adapted using error signals generated at distal locations in the brain, and thus dispels long-held assumptions about the algorithmic constraints on learning in neural circuits.", "Neuroscientists have long criticised deep learning algorithms as incompatible with current knowledge of neurobiology. We explore more biologically plausible versions of deep representation learning, focusing here mostly on unsupervised learning but developing a learning mechanism that could account for supervised, unsupervised and reinforcement learning. The starting point is that the basic learning rule believed to govern synaptic weight updates (Spike-TimingDependent Plasticity) can be interpreted as gradient descent on some objective function so long as the neuronal dynamics push firing rates towards better values of the objective function (be it supervised, unsupervised, or reward-driven). The second main idea is that this corresponds to a form of the variational EM algorithm, i.e., with approximate rather than exact posteriors, implemented by neural dynamics. Another contribution of this paper is that the gradients required for updating the hidden states in the above variational interpretation can be estimated using an approximation that only requires propagating activations forward and backward, with pairs of layers learning to form a denoising auto-encoder. Finally, we extend the theory about the probabilistic interpretation of auto-encoders to justify improved sampling schemes based on the generative interpretation of denoising auto-encoders, and we validate all these ideas on generative learning tasks." ] }

{ "cite_N": [ "@cite_38", "@cite_14", "@cite_9", "@cite_52", "@cite_44", "@cite_13", "@cite_12" ], "mid": [ "1985351089", "2920928264", "1978216348", "2962831356", "2071839134", "1967494143", "2084554572" ], "abstract": [ "We present a perceptual control space for simulation of cloth that works with any physical simulator, treating it as a black box. The perceptual control space provides intuitive, art-directable control over the simulation behavior based on a learned mapping from common descriptors for cloth (e.g., flowiness, softness) to the parameters of the simulation. To learn the mapping, we perform a series of perceptual experiments in which the simulation parameters are varied and participants assess the values of the common terms of the cloth on a scale. A multi-dimensional sub-space regression is performed on the results to build a perceptual generative model over the simulator parameters. We evaluate the perceptual control space by demonstrating that the generative model does in fact create simulated clothing that is rated by participants as having the expected properties. We also show that this perceptual control space generalizes to garments and motions not in the original experiments.", "This paper presents a learning-based clothing animation method for highly efficient virtual try-on simulation. Given a garment, we preprocess a rich database of physically-based dressed character simulations, for multiple body shapes and animations. Then, using this database, we train a learning-based model of cloth drape and wrinkles, as a function of body shape and dynamics. We propose a model that separates global garment fit, due to body shape, from local garment wrinkles, due to both pose dynamics and body shape. We use a recurrent neural network to regress garment wrinkles, and we achieve highly plausible nonlinear effects, in contrast to the blending artifacts suffered by previous methods. At runtime, dynamic virtual try-on animations are produced in just a few milliseconds for garments with thousands of triangles. We show qualitative and quantitative analysis of results", "We describe a complete system for animating realistic clothing on synthetic bodies of any shape and pose without manual intervention. The key component of the method is a model of clothing called DRAPE (DRessing Any PErson) that is learned from a physics-based simulation of clothing on bodies of different shapes and poses. The DRAPE model has the desirable property of \"factoring\" clothing deformations due to body shape from those due to pose variation. This factorization provides an approximation to the physical clothing deformation and greatly simplifies clothing synthesis. Given a parameterized model of the human body with known shape and pose parameters, we describe an algorithm that dresses the body with a garment that is customized to fit and possesses realistic wrinkles. DRAPE can be used to dress static bodies or animated sequences with a learned model of the cloth dynamics. Since the method is fully automated, it is appropriate for dressing large numbers of virtual characters of varying shape. The method is significantly more efficient than physical simulation.", "Designing real and virtual garments is becoming extremely demanding with rapidly changing fashion trends and increasing need for synthesizing realisticly dressed digital humans for various applications. This necessitates creating simple and effective workflows to facilitate authoring sewing patterns customized to garment and target body shapes to achieve desired looks. Traditional workflow involves a trial-and-error procedure wherein a mannequin is draped to judge the resultant folds and the sewing pattern iteratively adjusted until the desired look is achieved. This requires time and experience. Instead, we present a data-driven approach wherein the user directly indicates desired fold patterns simply by sketching while our system estimates corresponding garment and body shape parameters at interactive rates. The recovered parameters can then be further edited and the updated draped garment previewed. Technically, we achieve this via a novel shared shape space that allows the user to seamlessly specify desired characteristics across multimodal input without requiring to run garment simulation at design time. We evaluate our approach qualitatively via a user study and quantitatively against test datasets, and demonstrate how our system can generate a rich quality of on-body garments targeted for a range of body shapes while achieving desired fold characteristics. Code and data are available at our project webpage.", "The central argument against data-driven methods in computer graphics rests on the curse of dimensionality: it is intractable to precompute \"everything\" about a complex space. In this paper, we challenge that assumption by using several thousand CPU-hours to perform a massive exploration of the space of secondary clothing effects on a character animated through a large motion graph. Our system continually explores the phase space of cloth dynamics, incrementally constructing a secondary cloth motion graph that captures the dynamics of the system. We find that it is possible to sample the dynamical space to a low visual error tolerance and that secondary motion graphs containing tens of gigabytes of raw mesh data can be compressed down to only tens of megabytes. These results allow us to capture the effect of high-resolution, off-line cloth simulation for a rich space of character motion and deliver it efficiently as part of an interactive application.", "We present a technique for learning clothing models that enables the simultaneous animation of thousands of detailed garments in real-time. This surprisingly simple conditional model learns and preserves the key dynamic properties of a cloth motion along with folding details. Our approach requires no a priori physical model, but rather treats training data as a \"black box.\" We show that the models learned with our method are stable over large time-steps and can approximately resolve cloth-body collisions. We also show that within a class of methods, no simpler model covers the full range of cloth dynamics captured by ours. Our method bridges the current gap between skinning and physical simulation, combining benefits of speed from the former with dynamic effects from the latter. We demonstrate our approach on a variety of apparel worn by male and female human characters performing a varied set of motions typically used in video games (e.g., walking, running, jumping, etc.).", "Highly realistic virtual human models are rapidly becoming commonplace in computer graphics. These models, often represented by complex shape and requiring labor-intensive process, challenge the problem of automatic modeling. The problem and solutions to automatic modeling of animatable virtual humans are studied. Methods for capturing the shape of real people, parameterization techniques for modeling static shape (the variety of human body shapes) and dynamic shape (how the body shape changes as it moves) of virtual humans are classified, summarized and compared. Finally, methods for clothed virtual humans are reviewed." ] }

{ "cite_N": [ "@cite_26", "@cite_41", "@cite_48", "@cite_55", "@cite_42", "@cite_65", "@cite_21", "@cite_40", "@cite_63", "@cite_5", "@cite_31", "@cite_73" ], "mid": [ "2921745007", "2887358179", "1938204631", "", "2082145490", "2596210417", "2607760177", "2737762407", "2951631811", "1520005879", "2518246072", "2793768642" ], "abstract": [ "", "We present a novel method for high detail-preserving human avatar creation from monocular video. A parameterized body model is refined and optimized to maximally resemble subjects from a video showing them from all sides. Our avatars feature a natural face, hairstyle, clothes with garment wrinkles, and high-resolution texture. Our paper contributes facial landmark and shading-based human body shape refinement, a semantic texture prior, and a novel texture stitching strategy, resulting in the most sophisticated-looking human avatars obtained from a single video to date. Numerous results show the robustness and versatility of our method. A user study illustrates its superiority over the state-of-the-art in terms of identity preservation, level of detail, realism, and overall user preference.", "We present the first dense SLAM system capable of reconstructing non-rigidly deforming scenes in real-time, by fusing together RGBD scans captured from commodity sensors. Our DynamicFusion approach reconstructs scene geometry whilst simultaneously estimating a dense volumetric 6D motion field that warps the estimated geometry into a live frame. Like KinectFusion, our system produces increasingly denoised, detailed, and complete reconstructions as more measurements are fused, and displays the updated model in real time. Because we do not require a template or other prior scene model, the approach is applicable to a wide range of moving objects and scenes.", "", "A lot of research has recently focused on the problem of capturing the geometry and motion of garments. Such work usually relies on special markers printed on the fabric to establish temporally coherent correspondences between points on the garment's surface at different times. Unfortunately, this approach is tedious and prevents the capture of off-the-shelf clothing made from interesting fabrics. In this paper, we describe a marker-free approach to capturing garment motion that avoids these downsides. We establish temporally coherent parameterizations between incomplete geometries that we extract at each timestep with a multiview stereo algorithm. We then fill holes in the geometry using a template. This approach, for the first time, allows us to capture the geometry and motion of unpatterned, off-the-shelf garments made from a range of different fabrics.", "We address the problem of estimating human pose and body shape from 3D scans over time. Reliable estimation of 3D body shape is necessary for many applications including virtual try-on, health monitoring, and avatar creation for virtual reality. Scanning bodies in minimal clothing, however, presents a practical barrier to these applications. We address this problem by estimating body shape under clothing from a sequence of 3D scans. Previous methods that have exploited body models produce smooth shapes lacking personalized details. We contribute a new approach to recover a personalized shape of the person. The estimated shape deviates from a parametric model to fit the 3D scans. We demonstrate the method using high quality 4D data as well as sequences of visual hulls extracted from multi-view images. We also make available BUFF, a new 4D dataset that enables quantitative evaluation (http: buff.is.tue.mpg.de). Our method outperforms the state of the art in both pose estimation and shape estimation, qualitatively and quantitatively.", "3D garment capture is an important component for various applications such as free-view point video, virtual avatars, online shopping, and virtual cloth fitting. Due to the complexity of the deformations, capturing 3D garment shapes requires controlled and specialized setups. A viable alternative is image-based garment capture. Capturing 3D garment shapes from a single image, however, is a challenging problem and the current solutions come with assumptions on the lighting, camera calibration, complexity of human or mannequin poses considered, and more importantly a stable physical state for the garment and the underlying human body. In addition, most of the works require manual interaction and exhibit high run-times. We propose a new technique that overcomes these limitations, making garment shape estimation from an image a practical approach for dynamic garment capture. Starting from synthetic garment shape data generated through physically based simulations from various human bodies in complex poses obtained through Mocap sequences, and rendered under varying camera positions and lighting conditions, our novel method learns a mapping from rendered garment images to the underlying 3D garment model. This is achieved by training Convolutional Neural Networks CNN-s to estimate 3D vertex displacements from a template mesh with a specialized loss function. We illustrate that this technique is able to recover the global shape of dynamic 3D garments from a single image under varying factors such as challenging human poses, self occlusions, various camera poses and lighting conditions, at interactive rates. Improvement is shown if more than one view is integrated. Additionally, we show applications of our method to videos.", "Designing and simulating realistic clothing is challenging. Previous methods addressing the capture of clothing from 3D scans have been limited to single garments and simple motions, lack detail, or require specialized texture patterns. Here we address the problem of capturing regular clothing on fully dressed people in motion. People typically wear multiple pieces of clothing at a time. To estimate the shape of such clothing, track it over time, and render it believably, each garment must be segmented from the others and the body. Our ClothCap approach uses a new multi-part 3D model of clothed bodies, automatically segments each piece of clothing, estimates the minimally clothed body shape and pose under the clothing, and tracks the 3D deformations of the clothing over time. We estimate the garments and their motion from 4D scans; that is, high-resolution 3D scans of the subject in motion at 60 fps. ClothCap is able to capture a clothed person in motion, extract their clothing, and retarget the clothing to new body shapes; this provides a step towards virtual try-on.", "This paper proposes a new method for live free-viewpoint human performance capture with dynamic details (e.g., cloth wrinkles) using a single RGBD camera. Our main contributions are: (i) a multi-layer representation of garments and body, and (ii) a physics-based performance capture procedure. We first digitize the performer using multi-layer surface representation, which includes the undressed body surface and separate clothing meshes. For performance capture, we perform skeleton tracking, cloth simulation, and iterative depth fitting sequentially for the incoming frame. By incorporating cloth simulation into the performance capture pipeline, we can simulate plausible cloth dynamics and cloth-body interactions even in the occluded regions, which was not possible in previous capture methods. Moreover, by formulating depth fitting as a physical process, our system produces cloth tracking results consistent with the depth observation while still maintaining physical constraints. Results and evaluations show the effectiveness of our method. Our method also enables new types of applications such as cloth retargeting, free-viewpoint video rendering and animations.", "We propose a method to estimate the detailed 3D shape of a person from images of that person wearing clothing. The approach exploits a model of human body shapes that is learned from a database of over 2000 range scans. We show that the parameters of this shape model can be recovered independently of body pose. We further propose a generalization of the visual hull to account for the fact that observed silhouettes of clothed people do not provide a tight bound on the true 3D shape. With clothed subjects, different poses provide different constraints on the possible underlying 3D body shape. We consequently combine constraints across pose to more accurately estimate 3D body shape in the presence of occluding clothing. Finally we use the recovered 3D shape to estimate the gender of subjects and then employ gender-specific body models to refine our shape estimates. Results on a novel database of thousands of images of clothed and \"naked\" subjects, as well as sequences from the HumanEva dataset, suggest the method may be accurate enough for biometric shape analysis in video.", "Estimating 3D human body shape in motion from a sequence of unstructured oriented 3D point clouds is important for many applications. We propose the first automatic method to solve this problem that works in the presence of loose clothing. The problem is formulated as an optimization problem that solves for identity and posture parameters in a shape space capturing likely body shape variations. The automation is achieved by leveraging a recent robust pose detection method [1]. To account for clothing, we take advantage of motion cues by encouraging the estimated body shape to be inside the observations. The method is evaluated on a new benchmark containing different subjects, motions, and clothing styles that allows to quantitatively measure the accuracy of body shape estimates. Furthermore, we compare our results to existing methods that require manual input and demonstrate that results of similar visual quality can be obtained.", "This paper describes a method to obtain accurate 3D body models and texture of arbitrary people from a single, monocular video in which a person is moving. Based on a parametric body model, we present a robust processing pipeline to infer 3D model shapes including clothed people with 4.5mm reconstruction accuracy. At the core of our approach is the transformation of dynamic body pose into a canonical frame of reference. Our main contribution is a method to transform the silhouette cones corresponding to dynamic human silhouettes to obtain a visual hull in a common reference frame. This enables efficient estimation of a consensus 3D shape, texture and implanted animation skeleton based on a large number of frames. Results on 4 different datasets demonstrate the effectiveness of our approach to produce accurate 3D models. Requiring only an RGB camera, our method enables everyone to create their own fully animatable digital double, e.g., for social VR applications or virtual try-on for online fashion shopping." ] }

{ "cite_N": [ "@cite_33", "@cite_8", "@cite_53", "@cite_0", "@cite_34" ], "mid": [ "2109683418", "2071663264", "1989191365", "2886416285", "2887586359" ], "abstract": [ "We present a new performance capture approach that incorporates a physically-based cloth model to reconstruct a rigged fully-animatable virtual double of a real person in loose apparel from multi-view video recordings. Our algorithm only requires a minimum of manual interaction. Without the use of optical markers in the scene, our algorithm first reconstructs skeleton motion and detailed time-varying surface geometry of a real person from a reference video sequence. These captured reference performance data are then analyzed to automatically identify non-rigidly deforming pieces of apparel on the animated geometry. For each piece of apparel, parameters of a physically-based real-time cloth simulation model are estimated, and surface geometry of occluded body regions is approximated. The reconstructed character model comprises a skeleton-based representation for the actual body parts and a physically-based simulation model for the apparel. In contrast to previous performance capture methods, we can now also create new real-time animations of actors captured in general apparel.", "In this paper we present a framework for learning a three layered model of human shape, pose and garment deformation. The proposed deformation model provides intuitive control over the three parameters independently, while producing aesthetically pleasing deformations of both the garment and the human body. The shape and pose deformation layers of the model are trained on a rich dataset of full body 3D scans of human subjects in a variety of poses. The garment deformation layer is trained on animated mesh sequences of dressed actors and relies on a novel technique for human shape and posture estimation under clothing. The key contribution of this paper is that we consider garment deformations as the residual transformations between a naked mesh and the dressed mesh of the same subject.", "We introduce the SCAPE method (Shape Completion and Animation for PEople)---a data-driven method for building a human shape model that spans variation in both subject shape and pose. The method is based on a representation that incorporates both articulated and non-rigid deformations. We learn a pose deformation model that derives the non-rigid surface deformation as a function of the pose of the articulated skeleton. We also learn a separate model of variation based on body shape. Our two models can be combined to produce 3D surface models with realistic muscle deformation for different people in different poses, when neither appear in the training set. We show how the model can be used for shape completion --- generating a complete surface mesh given a limited set of markers specifying the target shape. We present applications of shape completion to partial view completion and motion capture animation. In particular, our method is capable of constructing a high-quality animated surface model of a moving person, with realistic muscle deformation, using just a single static scan and a marker motion capture sequence of the person.", "We present a novel method to generate accurate and realistic clothing deformation from real data capture. Previous methods for realistic cloth modeling mainly rely on intensive computation of physics-based simulation (with numerous heuristic parameters), while models reconstructed from visual observations typically suffer from lack of geometric details. Here, we propose an original framework consisting of two modules that work jointly to represent global shape deformation as well as surface details with high fidelity. Global shape deformations are recovered from a subspace model learned from 3D data of clothed people in motion, while high frequency details are added to normal maps created using a conditional Generative Adversarial Network whose architecture is designed to enforce realism and temporal consistency. This leads to unprecedented high-quality rendering of clothing deformation sequences, where fine wrinkles from (real) high resolution observations can be recovered. In addition, as the model is learned independently from body shape and pose, the framework is suitable for applications that require retargeting (e.g., body animation). Our experiments show original high quality results with a flexible model. We claim an entirely data-driven approach to realistic cloth wrinkle generation is possible.", "Recent capture technologies and methods allow not only to retrieve 3D model sequence of moving people in clothing, but also to separate and extract the underlying body geometry and motion component and separate the clothing as a geometric layer. So far this clothing layer has only been used as raw offsets for individual applications such as retargeting a different body capture sequence with the clothing layer of another sequence, with limited scope, e.g. using identical or similar motions. The structured, semantics and motion-correlated nature of the information contained in this layer has yet to be fully understood and exploited. To this purpose we propose a comprehensive analysis of the statistics of this layer with a simple two-component model, based on PCA subspace reduction of the layer information on one hand, and a generic parameter regression model using neural networks on the other hand, designed to regress from any semantic parameter whose variation is observed in a training set, to the layer parameteriza-tion space. We show that this model not only allows to reproduce previous motion retargeting works, but generalizes the data generation capabilities of the method to other semantic parameters such as clothing variation and size, or physical material parameters with synthetically generated training sequence, paving the way for many kinds of capture data-driven creation and augmentation applications." ] }

{ "cite_N": [ "@cite_35", "@cite_67", "@cite_22", "@cite_7", "@cite_60", "@cite_54", "@cite_32", "@cite_56", "@cite_39", "@cite_43", "@cite_24", "@cite_72", "@cite_45", "@cite_49", "@cite_66" ], "mid": [ "2089468765", "2606840594", "2794561444", "2560609797", "2963121255", "", "2952716587", "2211722331", "2603429625", "2140151376", "", "2546066744", "1920022804", "2785053089", "2099471712" ], "abstract": [ "Abstract Principal component analysis of a data matrix extracts the dominant patterns in the matrix in terms of a complementary set of score and loading plots. It is the responsibility of the data analyst to formulate the scientific issue at hand in terms of PC projections, PLS regressions, etc. Ask yourself, or the investigator, why the data matrix was collected, and for what purpose the experiments and measurements were made. Specify before the analysis what kinds of patterns you would expect and what you would find exciting. The results of the analysis depend on the scaling of the matrix, which therefore must be specified. Variance scaling, where each variable is scaled to unit variance, can be recommended for general use, provided that almost constant variables are left unscaled. Combining different types of variables warrants blockscaling. In the initial analysis, look for outliers and strong groupings in the plots, indicating that the data matrix perhaps should be “polished” or whether disjoint modeling is the proper course. For plotting purposes, two or three principal components are usually sufficient, but for modeling purposes the number of significant components should be properly determined, e.g. by cross-validation. Use the resulting principal components to guide your continued investigation or chemical experimentation, not as an end in itself.", "Recently, Convolutional Neural Networks have shown promising results for 3D geometry prediction. They can make predictions from very little input data such as a single color image. A major limitation of such approaches is that they only predict a coarse resolution voxel grid, which does not capture the surface of the objects well. We propose a general framework, called hierarchical surface prediction (HSP), which facilitates prediction of high resolution voxel grids. The main insight is that it is sufficient to predict high resolution voxels around the predicted surfaces. The exterior and interior of the objects can be represented with coarse resolution voxels. Our approach is not dependent on a specific input type. We show results for geometry prediction from color images, depth images and shape completion from partial voxel grids. Our analysis shows that our high resolution predictions are more accurate than low resolution predictions.", "This paper presents Point Convolutional Neural Networks (PCNN): a novel framework for applying convolutional neural networks to point clouds. The framework consists of two operators: extension and restriction, mapping point cloud functions to volumetric functions and vise-versa. A point cloud convolution is defined by pull-back of the Euclidean volumetric convolution via an extension-restriction mechanism. The point cloud convolution is computationally efficient, invariant to the order of points in the point cloud, robust to different samplings and varying densities, and translation invariant, that is the same convolution kernel is used at all points. PCNN generalizes image CNNs and allows readily adapting their architectures to the point cloud setting. Evaluation of PCNN on three central point cloud learning benchmarks convincingly outperform competing point cloud learning methods, and the vast majority of methods working with more informative shape representations such as surfaces and or normals.", "Point cloud is an important type of geometric data structure. Due to its irregular format, most researchers transform such data to regular 3D voxel grids or collections of images. This, however, renders data unnecessarily voluminous and causes issues. In this paper, we design a novel type of neural network that directly consumes point clouds, which well respects the permutation invariance of points in the input. Our network, named PointNet, provides a unified architecture for applications ranging from object classification, part segmentation, to scene semantic parsing. Though simple, PointNet is highly efficient and effective. Empirically, it shows strong performance on par or even better than state of the art. Theoretically, we provide analysis towards understanding of what the network has learnt and why the network is robust with respect to input perturbation and corruption.", "Few prior works study deep learning on point sets. PointNet is a pioneer in this direction. However, by design PointNet does not capture local structures induced by the metric space points live in, limiting its ability to recognize fine-grained patterns and generalizability to complex scenes. In this work, we introduce a hierarchical neural network that applies PointNet recursively on a nested partitioning of the input point set. By exploiting metric space distances, our network is able to learn local features with increasing contextual scales. With further observation that point sets are usually sampled with varying densities, which results in greatly decreased performance for networks trained on uniform densities, we propose novel set learning layers to adaptively combine features from multiple scales. Experiments show that our network called PointNet++ is able to learn deep point set features efficiently and robustly. In particular, results significantly better than state-of-the-art have been obtained on challenging benchmarks of 3D point clouds.", "", "Despite recent progress in generative image modeling, successfully generating high-resolution, diverse samples from complex datasets such as ImageNet remains an elusive goal. To this end, we train Generative Adversarial Networks at the largest scale yet attempted, and study the instabilities specific to such scale. We find that applying orthogonal regularization to the generator renders it amenable to a simple \"truncation trick,\" allowing fine control over the trade-off between sample fidelity and variety by reducing the variance of the Generator's input. Our modifications lead to models which set the new state of the art in class-conditional image synthesis. When trained on ImageNet at 128x128 resolution, our models (BigGANs) achieve an Inception Score (IS) of 166.5 and Frechet Inception Distance (FID) of 7.4, improving over the previous best IS of 52.52 and FID of 18.6.", "Robust object recognition is a crucial skill for robots operating autonomously in real world environments. Range sensors such as LiDAR and RGBD cameras are increasingly found in modern robotic systems, providing a rich source of 3D information that can aid in this task. However, many current systems do not fully utilize this information and have trouble efficiently dealing with large amounts of point cloud data. In this paper, we propose VoxNet, an architecture to tackle this problem by integrating a volumetric Occupancy Grid representation with a supervised 3D Convolutional Neural Network (3D CNN). We evaluate our approach on publicly available benchmarks using LiDAR, RGBD, and CAD data. VoxNet achieves accuracy beyond the state of the art while labeling hundreds of instances per second.", "We present a deep convolutional decoder architecture that can generate volumetric 3D outputs in a compute- and memory-efficient manner by using an octree representation. The network learns to predict both the structure of the octree, and the occupancy values of individual cells. This makes it a particularly valuable technique for generating 3D shapes. In contrast to standard decoders acting on regular voxel grids, the architecture does not have cubic complexity. This allows representing much higher resolution outputs with a limited memory budget. We demonstrate this in several application domains, including 3D convolutional autoencoders, generation of objects and whole scenes from high-level representations, and shape from a single image.", "Principal Component Analysis (PCA) has been widely used for the representation of shape, appearance and motion. One drawback of typical PCA methods is that they are least squares estimation techniques and hence fail to account for \"outliers\" which are common in realistic training sets. In computer vision applications, outliers typically occur within a sample (image) due to pixels that are corrupted by noise, alignment errors, or occlusion. We review previous approaches for making PCA robust to outliers and present a new method that uses an intra-sample outlier process to account for pixel outliers. We develop the theory of Robust Principal Component Analysis (RPCA) and describe a robust M-estimation algorithm for learning linear multi-variate representations of high dimensional data such as images. Quantitative comparisons with traditional PCA and previous robust algorithms illustrate the benefits of RPCA when outliers are present. Details of the algorithm are described and a software implementation is being made publically available.", "", "We study the problem of 3D object generation. We propose a novel framework, namely 3D Generative Adversarial Network (3D-GAN), which generates 3D objects from a probabilistic space by leveraging recent advances in volumetric convolutional networks and generative adversarial nets. The benefits of our model are three-fold: first, the use of an adversarial criterion, instead of traditional heuristic criteria, enables the generator to capture object structure implicitly and to synthesize high-quality 3D objects; second, the generator establishes a mapping from a low-dimensional probabilistic space to the space of 3D objects, so that we can sample objects without a reference image or CAD models, and explore the 3D object manifold; third, the adversarial discriminator provides a powerful 3D shape descriptor which, learned without supervision, has wide applications in 3D object recognition. Experiments demonstrate that our method generates high-quality 3D objects, and our unsupervisedly learned features achieve impressive performance on 3D object recognition, comparable with those of supervised learning methods.", "3D shape is a crucial but heavily underutilized cue in today's computer vision systems, mostly due to the lack of a good generic shape representation. With the recent availability of inexpensive 2.5D depth sensors (e.g. Microsoft Kinect), it is becoming increasingly important to have a powerful 3D shape representation in the loop. Apart from category recognition, recovering full 3D shapes from view-based 2.5D depth maps is also a critical part of visual understanding. To this end, we propose to represent a geometric 3D shape as a probability distribution of binary variables on a 3D voxel grid, using a Convolutional Deep Belief Network. Our model, 3D ShapeNets, learns the distribution of complex 3D shapes across different object categories and arbitrary poses from raw CAD data, and discovers hierarchical compositional part representation automatically. It naturally supports joint object recognition and shape completion from 2.5D depth maps, and it enables active object recognition through view planning. To train our 3D deep learning model, we construct ModelNet - a large-scale 3D CAD model dataset. Extensive experiments show that our 3D deep representation enables significant performance improvement over the-state-of-the-arts in a variety of tasks.", "Point clouds provide a flexible and scalable geometric representation suitable for countless applications in computer graphics; they also comprise the raw output of most 3D data acquisition devices. Hence, the design of intelligent computational models that act directly on point clouds is critical, especially when efficiency considerations or noise preclude the possibility of expensive denoising and meshing procedures. While hand-designed features on point clouds have long been proposed in graphics and vision, however, the recent overwhelming success of convolutional neural networks (CNNs) for image analysis suggests the value of adapting insight from CNN to the point cloud world. To this end, we propose a new neural network module dubbed EdgeConv suitable for CNN-based high-level tasks on point clouds including classification and segmentation. EdgeConv is differentiable and can be plugged into existing architectures. Compared to existing modules operating largely in extrinsic space or treating each point independently, EdgeConv has several appealing properties: It incorporates local neighborhood information; it can be stacked or recurrently applied to learn global shape properties; and in multi-layer systems affinity in feature space captures semantic characteristics over potentially long distances in the original embedding. Beyond proposing this module, we provide extensive evaluation and analysis revealing that EdgeConv captures and exploits fine-grained geometric properties of point clouds. The proposed approach achieves state-of-the-art performance on standard benchmarks including ModelNet40 and S3DIS.", "We propose a new framework for estimating generative models via an adversarial process, in which we simultaneously train two models: a generative model G that captures the data distribution, and a discriminative model D that estimates the probability that a sample came from the training data rather than G. The training procedure for G is to maximize the probability of D making a mistake. This framework corresponds to a minimax two-player game. In the space of arbitrary functions G and D, a unique solution exists, with G recovering the training data distribution and D equal to ½ everywhere. In the case where G and D are defined by multilayer perceptrons, the entire system can be trained with backpropagation. There is no need for any Markov chains or unrolled approximate inference networks during either training or generation of samples. Experiments demonstrate the potential of the framework through qualitative and quantitative evaluation of the generated samples." ] }

{ "cite_N": [ "@cite_61", "@cite_18", "@cite_28", "@cite_36", "@cite_70", "@cite_19", "@cite_50", "@cite_68" ], "mid": [ "1662382123", "2883221003", "2519887557", "2235901111", "", "", "2964321699", "2963197375" ], "abstract": [ "Convolutional Neural Networks are extremely efficient architectures in image and audio recognition tasks, thanks to their ability to exploit the local translational invariance of signal classes over their domain. In this paper we consider possible generalizations of CNNs to signals defined on more general domains without the action of a translation group. In particular, we propose two constructions, one based upon a hierarchical clustering of the domain, and another based on the spectrum of the graph Laplacian. We show through experiments that for low-dimensional graphs it is possible to learn convolutional layers with a number of parameters independent of the input size, resulting in efficient deep architectures.", "Learned 3D representations of human faces are useful for computer vision problems such as 3D face tracking and reconstruction from images, as well as graphics applications such as character generation and animation. Traditional models learn a latent representation of a face using linear subspaces or higher-order tensor generalizations. Due to this linearity, they can not capture extreme deformations and non-linear expressions. To address this, we introduce a versatile model that learns a non-linear representation of a face using spectral convolutions on a mesh surface. We introduce mesh sampling operations that enable a hierarchical mesh representation that captures non-linear variations in shape and expression at multiple scales within the model. In a variational setting, our model samples diverse realistic 3D faces from a multivariate Gaussian distribution. Our training data consists of 20,466 meshes of extreme expressions captured over 12 different subjects. Despite limited training data, our trained model outperforms state-of-the-art face models with 50 lower reconstruction error, while using 75 fewer parameters. We show that, replacing the expression space of an existing state-of-the-art face model with our model, achieves a lower reconstruction error. Our data, model and code are available at http: coma.is.tue.mpg.de .", "We present a scalable approach for semi-supervised learning on graph-structured data that is based on an efficient variant of convolutional neural networks which operate directly on graphs. We motivate the choice of our convolutional architecture via a localized first-order approximation of spectral graph convolutions. Our model scales linearly in the number of graph edges and learns hidden layer representations that encode both local graph structure and features of nodes. In a number of experiments on citation networks and on a knowledge graph dataset we demonstrate that our approach outperforms related methods by a significant margin.", "Many applications in computer graphics require complex, highly detailed models. However, the level of detail actually necessary may vary considerably. To control processing time, it is often desirable to use approximations in place of excessively detailed models. We have developed a surface simplification algorithm which can rapidly produce high quality approximations of polygonal models. The algorithm uses iterative contractions of vertex pairs to simplify models and maintains surface error approximations using quadric matrices. By contracting arbitrary vertex pairs (not just edges), our algorithm is able to join unconnected regions of models. This can facilitate much better approximations, both visually and with respect to geometric error. In order to allow topological joining, our system also supports non-manifold surface models. CR Categories: I.3.5 [Computer Graphics]: Computational Geometry and Object Modeling—surface and object representations", "", "", "In this work, we are interested in generalizing convolutional neural networks (CNNs) from low-dimensional regular grids, where image, video and speech are represented, to high-dimensional irregular domains, such as social networks, brain connectomes or words' embedding, represented by graphs. We present a formulation of CNNs in the context of spectral graph theory, which provides the necessary mathematical background and efficient numerical schemes to design fast localized convolutional filters on graphs. Importantly, the proposed technique offers the same linear computational complexity and constant learning complexity as classical CNNs, while being universal to any graph structure. Experiments on MNIST and 20NEWS demonstrate the ability of this novel deep learning system to learn local, stationary, and compositional features on graphs.", "The availability of affordable and portable depth sensors has made scanning objects and people simpler than ever. However, dealing with occlusions and missing parts is still a significant challenge. The problem of reconstructing a (possibly non-rigidly moving) 3D object from a single or multiple partial scans has received increasing attention in recent years. In this work, we propose a novel learning-based method for the completion of partial shapes. Unlike the majority of existing approaches, our method focuses on objects that can undergo non-rigid deformations. The core of our method is a variational autoencoder with graph convolutional operations that learns a latent space for complete realistic shapes. At inference, we optimize to find the representation in this latent space that best fits the generated shape to the known partial input. The completed shape exhibits a realistic appearance on the unknown part. We show promising results towards the completion of synthetic and real scans of human body and face meshes exhibiting different styles of articulation and partiality." ] }