labels
sequencelengths 1
1
| text
stringlengths 174
508
|
---|---|
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
What are the influence factors of a distance sensor? [/INST] The influencing factors are Light Intensity and Vibration.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
What are the influence factors of a brightness sensor? [/INST] The influencing factors are Light Intensity and Vibration.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
What are the influence factors of a temperature sensor? [/INST] The influencing factors are Temperature and Humidity.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
What are the influence factors of a humidity sensor? [/INST] The influencing factors are Temperature and Humidity.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
What are the influence factors of a brake? [/INST] The influencing factors are Humidity, Temperature, and Vibration.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Find the influencing factors of a distance sensor and weigh them from high (0.99) to middle (0.95) to low (0.9). [/INST] The influencing factors for a distance sensor are:
1. Vibration: 0.99
- Mechanical vibrations can significantly impact the stability and accuracy of distance measurements.
2. Light Intensity: 0.9
- High levels of ambient light can cause interference and noise, affecting the accuracy of optical sensors.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Find the influencing factors of a brightness sensor and weigh them from high (0.99) to middle (0.95) to low (0.9). [/INST] The influencing factors for a brightness sensor are:
1. Light Intensity: 0.99
- Variations in light levels directly affect sensor readings.
2. Vibration: 0.9
- Physical vibrations can impact the precision and stability of brightness sensors.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Find the influencing factors of a temperature sensor and weigh them from high (0.99) to middle (0.95) to low (0.9). [/INST] The influencing factors for a temperature sensor are:
1. Temperature: 0.99
- The primary factor affecting temperature sensors is the temperature itself.
2. Humidity: 0.95
- High humidity levels can affect sensor accuracy and response time.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Find the influencing factors of a humidity sensor and weigh them from high (0.99) to middle (0.95) to low (0.9). [/INST] The influencing factors for a humidity sensor are:
1. Humidity: 0.99
- The primary factor affecting humidity sensors is the humidity level itself.
2. Temperature: 0.95
- Temperature variations can impact the accuracy and response time of humidity sensors.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Find the influencing factors of a brake and weigh them from high (0.99) to middle (0.95) to low (0.9). [/INST] The influencing factors for a brake are:
1. Humidity: 0.9
- High humidity can cause corrosion and affect the performance of the brake components.
2. Temperature: 0.9
- High temperatures can reduce braking efficiency and cause brake fade.
3. Vibration: 0.95
- Strong vibrations can reduce braking efficiency and cause brake fade.</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a distance sensor by multiplying the failure rate from the manufacturer by the product of all influencing factors. [/INST] The base failure rate is calculated as: 位_0 = 0.001 * 0.99 * 0.9 = 8.91 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a brightness sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the brightness sensor is calculated as: 位_0 = 0.0005 * (0.99 * 0.95) = 4.7025 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a temperature sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the temperature sensor is calculated as: 位_0 = 0.002 * (0.99 * 0.95) = 1.881 * 10^(-3).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a humidity sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the humidity sensor is calculated as: 位_0 = 0.0015 * (0.99 * 0.95) = 1.41075 * 10^(-3).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a brake using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the brake is calculated as: 位_0 = 0.0003 * (0.9 * 0.9 * 0.95) = 2.3085 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a distance sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the distance sensor is calculated as: 位_0 = 0.002 * (0.99 * 0.9) = 1.782 * 10^(-3).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a distance sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the distance sensor is calculated as: 位_0 = 0.0005 * (0.99 * 0.9) = 4.455 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a brightness sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the brightness sensor is calculated as: 位_0 = 0.0008 * (0.99 * 0.95) = 7.524 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a brightness sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the brightness sensor is calculated as: 位_0 = 0.0003 * (0.99 * 0.95) = 2.8215 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a temperature sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the temperature sensor is calculated as: 位_0 = 0.003 * (0.99 * 0.95) = 2.8215 * 10^(-3).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a temperature sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the temperature sensor is calculated as: 位_0 = 0.001 * (0.99 * 0.95) = 9.405 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a humidity sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the humidity sensor is calculated as: 位_0 = 0.002 * (0.99 * 0.95) = 1.881 * 10^(-3).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a humidity sensor using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the humidity sensor is calculated as: 位_0 = 0.0008 * (0.99 * 0.95) = 7.524 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a brake using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the brake is calculated as: 位_0 = 0.0006 * (0.9 * 0.9 * 0.95) = 4.617 * 10^(-4).</s> |
[
"sensor_data"
] | <s>[INST] <<SYS>>
You are a helpful assistant.
<</SYS>>
Calculate the base failure rate of a brake using the formula: 位_0 = 位_H * 鈭廮{j=1}^r p_j. [/INST] The base failure rate for the brake is calculated as: 位_0 = 0.0004 * (0.9 * 0.9 * 0.95) = 2.918 * 10^(-4).</s> |