ALBERT

Overview

The ALBERT model was proposed in ALBERT: A Lite BERT for Self-supervised Learning of Language Representations by Zhenzhong Lan, Mingda Chen, Sebastian Goodman, Kevin Gimpel, Piyush Sharma, Radu Soricut. It presents two parameter-reduction techniques to lower memory consumption and increase the training speed of BERT:

• Splitting the embedding matrix into two smaller matrices.

• Using repeating layers split among groups.

The abstract from the paper is the following:

Increasing model size when pretraining natural language representations often results in improved performance on downstream tasks. However, at some point further model increases become harder due to GPU/TPU memory limitations, longer training times, and unexpected model degradation. To address these problems, we present two parameter-reduction techniques to lower memory consumption and increase the training speed of BERT. Comprehensive empirical evidence shows that our proposed methods lead to models that scale much better compared to the original BERT. We also use a self-supervised loss that focuses on modeling inter-sentence coherence, and show it consistently helps downstream tasks with multi-sentence inputs. As a result, our best model establishes new state-of-the-art results on the GLUE, RACE, and SQuAD benchmarks while having fewer parameters compared to BERT-large.

Tips:

• ALBERT is a model with absolute position embeddings so it’s usually advised to pad the inputs on the right rather than the left.

• ALBERT uses repeating layers which results in a small memory footprint, however the computational cost remains similar to a BERT-like architecture with the same number of hidden layers as it has to iterate through the same number of (repeating) layers.

This model was contributed by lysandre. The original code can be found here.

AlbertConfig

class transformers.AlbertConfig(vocab_size=30000, embedding_size=128, hidden_size=4096, num_hidden_layers=12, num_hidden_groups=1, num_attention_heads=64, intermediate_size=16384, inner_group_num=1, hidden_act='gelu_new', hidden_dropout_prob=0, attention_probs_dropout_prob=0, max_position_embeddings=512, type_vocab_size=2, initializer_range=0.02, layer_norm_eps=1e-12, classifier_dropout_prob=0.1, position_embedding_type='absolute', pad_token_id=0, bos_token_id=2, eos_token_id=3, **kwargs)

This is the configuration class to store the configuration of a AlbertModel or a TFAlbertModel. It is used to instantiate an ALBERT model according to the specified arguments, defining the model architecture. Instantiating a configuration with the defaults will yield a similar configuration to that of the ALBERT xxlarge architecture.

Configuration objects inherit from PretrainedConfig and can be used to control the model outputs. Read the documentation from PretrainedConfig for more information.

Parameters

• vocab_size (int, optional, defaults to 30000) – Vocabulary size of the ALBERT model. Defines the number of different tokens that can be represented by the inputs_ids passed when calling AlbertModel or TFAlbertModel.

• embedding_size (int, optional, defaults to 128) – Dimensionality of vocabulary embeddings.

• hidden_size (int, optional, defaults to 4096) – Dimensionality of the encoder layers and the pooler layer.

• num_hidden_layers (int, optional, defaults to 12) – Number of hidden layers in the Transformer encoder.

• num_hidden_groups (int, optional, defaults to 1) – Number of groups for the hidden layers, parameters in the same group are shared.

• num_attention_heads (int, optional, defaults to 64) – Number of attention heads for each attention layer in the Transformer encoder.

• intermediate_size (int, optional, defaults to 16384) – The dimensionality of the “intermediate” (often named feed-forward) layer in the Transformer encoder.

• inner_group_num (int, optional, defaults to 1) – The number of inner repetition of attention and ffn.

• hidden_act (str or Callable, optional, defaults to "gelu_new") – The non-linear activation function (function or string) in the encoder and pooler. If string, "gelu", "relu", "silu" and "gelu_new" are supported.

• hidden_dropout_prob (float, optional, defaults to 0) – The dropout probability for all fully connected layers in the embeddings, encoder, and pooler.

• attention_probs_dropout_prob (float, optional, defaults to 0) – The dropout ratio for the attention probabilities.

• max_position_embeddings (int, optional, defaults to 512) – The maximum sequence length that this model might ever be used with. Typically set this to something large (e.g., 512 or 1024 or 2048).

• type_vocab_size (int, optional, defaults to 2) – The vocabulary size of the token_type_ids passed when calling AlbertModel or TFAlbertModel.

• initializer_range (float, optional, defaults to 0.02) – The standard deviation of the truncated_normal_initializer for initializing all weight matrices.

• layer_norm_eps (float, optional, defaults to 1e-12) – The epsilon used by the layer normalization layers.

• classifier_dropout_prob (float, optional, defaults to 0.1) – The dropout ratio for attached classifiers.

• position_embedding_type (str, optional, defaults to "absolute") – Type of position embedding. Choose one of "absolute", "relative_key", "relative_key_query". For positional embeddings use "absolute". For more information on "relative_key", please refer to Self-Attention with Relative Position Representations (Shaw et al.). For more information on "relative_key_query", please refer to Method 4 in Improve Transformer Models with Better Relative Position Embeddings (Huang et al.).

Examples:

>>> from transformers import AlbertConfig, AlbertModel
>>> # Initializing an ALBERT-xxlarge style configuration
>>> albert_xxlarge_configuration = AlbertConfig()

>>> # Initializing an ALBERT-base style configuration
>>> albert_base_configuration = AlbertConfig(
...      hidden_size=768,
...      num_attention_heads=12,
...      intermediate_size=3072,
...  )

>>> # Initializing a model from the ALBERT-base style configuration
>>> model = AlbertModel(albert_xxlarge_configuration)

>>> # Accessing the model configuration
>>> configuration = model.config

AlbertTokenizer

class transformers.AlbertTokenizer(vocab_file, do_lower_case=True, remove_space=True, keep_accents=False, bos_token='[CLS]', eos_token='[SEP]', unk_token='<unk>', sep_token='[SEP]', pad_token='<pad>', cls_token='[CLS]', mask_token='[MASK]', sp_model_kwargs: Optional[Dict[str, Any]] = None, **kwargs)

Construct an ALBERT tokenizer. Based on SentencePiece.

This tokenizer inherits from PreTrainedTokenizer which contains most of the main methods. Users should refer to this superclass for more information regarding those methods.

Parameters

• vocab_file (str) – SentencePiece file (generally has a .spm extension) that contains the vocabulary necessary to instantiate a tokenizer.

• do_lower_case (bool, optional, defaults to True) – Whether or not to lowercase the input when tokenizing.

• remove_space (bool, optional, defaults to True) – Whether or not to strip the text when tokenizing (removing excess spaces before and after the string).

• keep_accents (bool, optional, defaults to False) – Whether or not to keep accents when tokenizing.

• bos_token (str, optional, defaults to "[CLS]") –

  The beginning of sequence token that was used during pretraining. Can be used a sequence classifier token.

  Note

  When building a sequence using special tokens, this is not the token that is used for the beginning of sequence. The token used is the cls_token.

• eos_token (str, optional, defaults to "[SEP]") –

  The end of sequence token.

  Note

  When building a sequence using special tokens, this is not the token that is used for the end of sequence. The token used is the sep_token.

• unk_token (str, optional, defaults to "<unk>") – The unknown token. A token that is not in the vocabulary cannot be converted to an ID and is set to be this token instead.

• sep_token (str, optional, defaults to "[SEP]") – The separator token, which is used when building a sequence from multiple sequences, e.g. two sequences for sequence classification or for a text and a question for question answering. It is also used as the last token of a sequence built with special tokens.

• pad_token (str, optional, defaults to "<pad>") – The token used for padding, for example when batching sequences of different lengths.

• cls_token (str, optional, defaults to "[CLS]") – The classifier token which is used when doing sequence classification (classification of the whole sequence instead of per-token classification). It is the first token of the sequence when built with special tokens.

• mask_token (str, optional, defaults to "[MASK]") – The token used for masking values. This is the token used when training this model with masked language modeling. This is the token which the model will try to predict.

• sp_model_kwargs (dict, optional) –

  Will be passed to the SentencePieceProcessor.__init__() method. The Python wrapper for SentencePiece can be used, among other things, to set:

  • enable_sampling: Enable subword regularization.

  • nbest_size: Sampling parameters for unigram. Invalid for BPE-Dropout.

    • nbest_size = {0,1}: No sampling is performed.

    • nbest_size > 1: samples from the nbest_size results.

    • nbest_size < 0: assuming that nbest_size is infinite and samples from the all hypothesis (lattice) using forward-filtering-and-backward-sampling algorithm.

  • alpha: Smoothing parameter for unigram sampling, and dropout probability of merge operations for BPE-dropout.

sp_model

The SentencePiece processor that is used for every conversion (string, tokens and IDs).

Type

SentencePieceProcessor

build_inputs_with_special_tokens(token_ids_0: List[int], token_ids_1: Optional[List[int]] = None) → List[int]

Build model inputs from a sequence or a pair of sequence for sequence classification tasks by concatenating and adding special tokens. An ALBERT sequence has the following format:

• single sequence: [CLS] X [SEP]

• pair of sequences: [CLS] A [SEP] B [SEP]

Parameters

• token_ids_0 (List[int]) – List of IDs to which the special tokens will be added.

• token_ids_1 (List[int], optional) – Optional second list of IDs for sequence pairs.

Returns

List of input IDs with the appropriate special tokens.

Return type

List[int]

create_token_type_ids_from_sequences(token_ids_0: List[int], token_ids_1: Optional[List[int]] = None) → List[int]

Create a mask from the two sequences passed to be used in a sequence-pair classification task. An ALBERT sequence pair mask has the following format:

0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1
| first sequence    | second sequence |

If token_ids_1 is None, this method only returns the first portion of the mask (0s).

Parameters

• token_ids_0 (List[int]) – List of IDs.

• token_ids_1 (List[int], optional) – Optional second list of IDs for sequence pairs.

Returns

List of token type IDs according to the given sequence(s).

Return type

List[int]

get_special_tokens_mask(token_ids_0: List[int], token_ids_1: Optional[List[int]] = None, already_has_special_tokens: bool = False) → List[int]

Retrieve sequence ids from a token list that has no special tokens added. This method is called when adding special tokens using the tokenizer prepare_for_model method.

Parameters

• token_ids_0 (List[int]) – List of IDs.

• token_ids_1 (List[int], optional) – Optional second list of IDs for sequence pairs.

• already_has_special_tokens (bool, optional, defaults to False) – Whether or not the token list is already formatted with special tokens for the model.

Returns

A list of integers in the range [0, 1]: 1 for a special token, 0 for a sequence token.

Return type

List[int]

save_vocabulary(save_directory: str, filename_prefix: Optional[str] = None) → Tuple[str]

Save only the vocabulary of the tokenizer (vocabulary + added tokens).

This method won’t save the configuration and special token mappings of the tokenizer. Use _save_pretrained() to save the whole state of the tokenizer.

Parameters

• save_directory (str) – The directory in which to save the vocabulary.

• filename_prefix (str, optional) – An optional prefix to add to the named of the saved files.

Returns

Paths to the files saved.

Return type

Tuple(str)

AlbertTokenizerFast

class transformers.AlbertTokenizerFast(vocab_file=None, tokenizer_file=None, do_lower_case=True, remove_space=True, keep_accents=False, bos_token='[CLS]', eos_token='[SEP]', unk_token='<unk>', sep_token='[SEP]', pad_token='<pad>', cls_token='[CLS]', mask_token='[MASK]', **kwargs)

Construct a “fast” ALBERT tokenizer (backed by HuggingFace’s tokenizers library). Based on Unigram. This tokenizer inherits from PreTrainedTokenizerFast which contains most of the main methods. Users should refer to this superclass for more information regarding those methods

Parameters

• vocab_file (str) – SentencePiece file (generally has a .spm extension) that contains the vocabulary necessary to instantiate a tokenizer.

• do_lower_case (bool, optional, defaults to True) – Whether or not to lowercase the input when tokenizing.

• remove_space (bool, optional, defaults to True) – Whether or not to strip the text when tokenizing (removing excess spaces before and after the string).

• keep_accents (bool, optional, defaults to False) – Whether or not to keep accents when tokenizing.

• bos_token (str, optional, defaults to "[CLS]") –

  The beginning of sequence token that was used during pretraining. Can be used a sequence classifier token.

  Note

  When building a sequence using special tokens, this is not the token that is used for the beginning of sequence. The token used is the cls_token.

• eos_token (str, optional, defaults to "[SEP]") – The end of sequence token. .. note:: When building a sequence using special tokens, this is not the token that is used for the end of sequence. The token used is the sep_token.

• unk_token (str, optional, defaults to "<unk>") – The unknown token. A token that is not in the vocabulary cannot be converted to an ID and is set to be this token instead.

• sep_token (str, optional, defaults to "[SEP]") – The separator token, which is used when building a sequence from multiple sequences, e.g. two sequences for sequence classification or for a text and a question for question answering. It is also used as the last token of a sequence built with special tokens.

• pad_token (str, optional, defaults to "<pad>") – The token used for padding, for example when batching sequences of different lengths.

• cls_token (str, optional, defaults to "[CLS]") – The classifier token which is used when doing sequence classification (classification of the whole sequence instead of per-token classification). It is the first token of the sequence when built with special tokens.

• mask_token (str, optional, defaults to "[MASK]") – The token used for masking values. This is the token used when training this model with masked language modeling. This is the token which the model will try to predict.

build_inputs_with_special_tokens(token_ids_0: List[int], token_ids_1: Optional[List[int]] = None) → List[int]

Build model inputs from a sequence or a pair of sequence for sequence classification tasks by concatenating and adding special tokens. An ALBERT sequence has the following format:

• single sequence: [CLS] X [SEP]

• pair of sequences: [CLS] A [SEP] B [SEP]

Parameters

• token_ids_0 (List[int]) – List of IDs to which the special tokens will be added

• token_ids_1 (List[int], optional) – Optional second list of IDs for sequence pairs.

Returns

list of input IDs with the appropriate special tokens.

Return type

List[int]

create_token_type_ids_from_sequences(token_ids_0: List[int], token_ids_1: Optional[List[int]] = None) → List[int]

Creates a mask from the two sequences passed to be used in a sequence-pair classification task. An ALBERT sequence pair mask has the following format:

0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1
| first sequence    | second sequence |

if token_ids_1 is None, only returns the first portion of the mask (0s).

Parameters

• token_ids_0 (List[int]) – List of ids.

• token_ids_1 (List[int], optional) – Optional second list of IDs for sequence pairs.

Returns

List of token type IDs according to the given sequence(s).

Return type

List[int]

save_vocabulary(save_directory: str, filename_prefix: Optional[str] = None) → Tuple[str]

Save only the vocabulary of the tokenizer (vocabulary + added tokens).

This method won’t save the configuration and special token mappings of the tokenizer. Use _save_pretrained() to save the whole state of the tokenizer.

Parameters

• save_directory (str) – The directory in which to save the vocabulary.

• filename_prefix (str, optional) – An optional prefix to add to the named of the saved files.

Returns

Paths to the files saved.

Return type

Tuple(str)

slow_tokenizer_class

alias of transformers.models.albert.tokenization_albert.AlbertTokenizer

Albert specific outputs

class transformers.models.albert.modeling_albert.AlbertForPreTrainingOutput(loss: Optional[torch.FloatTensor] = None, prediction_logits: torch.FloatTensor = None, sop_logits: torch.FloatTensor = None, hidden_states: Optional[Tuple[torch.FloatTensor]] = None, attentions: Optional[Tuple[torch.FloatTensor]] = None)

Output type of AlbertForPreTraining.

Parameters

• loss (optional, returned when labels is provided, torch.FloatTensor of shape (1,)) – Total loss as the sum of the masked language modeling loss and the next sequence prediction (classification) loss.

• prediction_logits (torch.FloatTensor of shape (batch_size, sequence_length, config.vocab_size)) – Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).

• sop_logits (torch.FloatTensor of shape (batch_size, 2)) – Prediction scores of the next sequence prediction (classification) head (scores of True/False continuation before SoftMax).

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) –

  Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) –

  Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

class transformers.models.albert.modeling_tf_albert.TFAlbertForPreTrainingOutput(loss: tensorflow.python.framework.ops.Tensor = None, prediction_logits: tensorflow.python.framework.ops.Tensor = None, sop_logits: tensorflow.python.framework.ops.Tensor = None, hidden_states: Optional[Tuple[tensorflow.python.framework.ops.Tensor]] = None, attentions: Optional[Tuple[tensorflow.python.framework.ops.Tensor]] = None)

Output type of TFAlbertForPreTraining.

Parameters

• prediction_logits (tf.Tensor of shape (batch_size, sequence_length, config.vocab_size)) – Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).

• sop_logits (tf.Tensor of shape (batch_size, 2)) – Prediction scores of the next sequence prediction (classification) head (scores of True/False continuation before SoftMax).

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) –

  Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) –

  Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

AlbertModel

class transformers.AlbertModel(config, add_pooling_layer=True)

The bare ALBERT Model transformer outputting raw hidden-states without any specific head on top.

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

forward(input_ids=None, attention_mask=None, token_type_ids=None, position_ids=None, head_mask=None, inputs_embeds=None, output_attentions=None, output_hidden_states=None, return_dict=None)

The AlbertModel forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (torch.LongTensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (torch.FloatTensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple.

Returns

A BaseModelOutputWithPooling or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• last_hidden_state (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size)) – Sequence of hidden-states at the output of the last layer of the model.

• pooler_output (torch.FloatTensor of shape (batch_size, hidden_size)) – Last layer hidden-state of the first token of the sequence (classification token) further processed by a Linear layer and a Tanh activation function. The Linear layer weights are trained from the next sentence prediction (classification) objective during pretraining.

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

BaseModelOutputWithPooling or tuple(torch.FloatTensor)

Example:

>>> from transformers import AlbertTokenizer, AlbertModel
>>> import torch

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = AlbertModel.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> outputs = model(**inputs)

>>> last_hidden_states = outputs.last_hidden_state

AlbertForPreTraining

class transformers.AlbertForPreTraining(config)

Albert Model with two heads on top as done during the pretraining: a masked language modeling head and a sentence order prediction (classification) head.

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

forward(input_ids=None, attention_mask=None, token_type_ids=None, position_ids=None, head_mask=None, inputs_embeds=None, labels=None, sentence_order_label=None, output_attentions=None, output_hidden_states=None, return_dict=None)

The AlbertForPreTraining forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (torch.LongTensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (torch.FloatTensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple.

• labels (torch.LongTensor of shape (batch_size, sequence_length), optional) – Labels for computing the masked language modeling loss. Indices should be in [-100, 0, ..., config.vocab_size] (see input_ids docstring) Tokens with indices set to -100 are ignored (masked), the loss is only computed for the tokens with labels in [0, ..., config.vocab_size]

• sentence_order_label (torch.LongTensor of shape (batch_size,), optional) – Labels for computing the next sequence prediction (classification) loss. Input should be a sequence pair (see input_ids docstring) Indices should be in [0, 1]. 0 indicates original order (sequence A, then sequence B), 1 indicates switched order (sequence B, then sequence A).

Returns

A AlbertForPreTrainingOutput or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (optional, returned when labels is provided, torch.FloatTensor of shape (1,)) – Total loss as the sum of the masked language modeling loss and the next sequence prediction (classification) loss.

• prediction_logits (torch.FloatTensor of shape (batch_size, sequence_length, config.vocab_size)) – Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).

• sop_logits (torch.FloatTensor of shape (batch_size, 2)) – Prediction scores of the next sequence prediction (classification) head (scores of True/False continuation before SoftMax).

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Example:

>>> from transformers import AlbertTokenizer, AlbertForPreTraining
>>> import torch

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = AlbertForPreTraining.from_pretrained('albert-base-v2')

>>> input_ids = torch.tensor(tokenizer.encode("Hello, my dog is cute", add_special_tokens=True)).unsqueeze(0)  # Batch size 1
>>> outputs = model(input_ids)

>>> prediction_logits = outputs.prediction_logits
>>> sop_logits = outputs.sop_logits

Return type

AlbertForPreTrainingOutput or tuple(torch.FloatTensor)

AlbertForMaskedLM

class transformers.AlbertForMaskedLM(config)

Albert Model with a language modeling head on top.

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

forward(input_ids=None, attention_mask=None, token_type_ids=None, position_ids=None, head_mask=None, inputs_embeds=None, labels=None, output_attentions=None, output_hidden_states=None, return_dict=None)

The AlbertForMaskedLM forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (torch.LongTensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (torch.FloatTensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple.

• labels (torch.LongTensor of shape (batch_size, sequence_length), optional) – Labels for computing the masked language modeling loss. Indices should be in [-100, 0, ..., config.vocab_size] (see input_ids docstring) Tokens with indices set to -100 are ignored (masked), the loss is only computed for the tokens with labels in [0, ..., config.vocab_size]

Returns

A MaskedLMOutput or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) – Masked language modeling (MLM) loss.

• logits (torch.FloatTensor of shape (batch_size, sequence_length, config.vocab_size)) – Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

MaskedLMOutput or tuple(torch.FloatTensor)

Example:

>>> from transformers import AlbertTokenizer, AlbertForMaskedLM
>>> import torch

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = AlbertForMaskedLM.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("The capital of France is [MASK].", return_tensors="pt")
>>> labels = tokenizer("The capital of France is Paris.", return_tensors="pt")["input_ids"]

>>> outputs = model(**inputs, labels=labels)
>>> loss = outputs.loss
>>> logits = outputs.logits

AlbertForSequenceClassification

class transformers.AlbertForSequenceClassification(config)

Albert Model transformer with a sequence classification/regression head on top (a linear layer on top of the pooled output) e.g. for GLUE tasks.

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

forward(input_ids=None, attention_mask=None, token_type_ids=None, position_ids=None, head_mask=None, inputs_embeds=None, labels=None, output_attentions=None, output_hidden_states=None, return_dict=None)

The AlbertForSequenceClassification forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (torch.LongTensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (torch.FloatTensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple.

• labels (torch.LongTensor of shape (batch_size,), optional) – Labels for computing the sequence classification/regression loss. Indices should be in [0, ..., config.num_labels - 1]. If config.num_labels == 1 a regression loss is computed (Mean-Square loss), If config.num_labels > 1 a classification loss is computed (Cross-Entropy).

Returns

A SequenceClassifierOutput or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) – Classification (or regression if config.num_labels==1) loss.

• logits (torch.FloatTensor of shape (batch_size, config.num_labels)) – Classification (or regression if config.num_labels==1) scores (before SoftMax).

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

SequenceClassifierOutput or tuple(torch.FloatTensor)

Example:

>>> from transformers import AlbertTokenizer, AlbertForSequenceClassification
>>> import torch

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = AlbertForSequenceClassification.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> labels = torch.tensor([1]).unsqueeze(0)  # Batch size 1
>>> outputs = model(**inputs, labels=labels)
>>> loss = outputs.loss
>>> logits = outputs.logits

AlbertForMultipleChoice

class transformers.AlbertForMultipleChoice(config)

Albert Model with a multiple choice classification head on top (a linear layer on top of the pooled output and a softmax) e.g. for RocStories/SWAG tasks.

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

forward(input_ids=None, attention_mask=None, token_type_ids=None, position_ids=None, head_mask=None, inputs_embeds=None, labels=None, output_attentions=None, output_hidden_states=None, return_dict=None)

The AlbertForMultipleChoice forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (torch.LongTensor of shape (batch_size, num_choices, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (torch.FloatTensor of shape (batch_size, num_choices, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (torch.LongTensor of shape (batch_size, num_choices, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (torch.LongTensor of shape (batch_size, num_choices, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (torch.FloatTensor of shape (batch_size, num_choices, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple.

• labels (torch.LongTensor of shape (batch_size,), optional) – Labels for computing the multiple choice classification loss. Indices should be in [0, ..., num_choices-1] where num_choices is the size of the second dimension of the input tensors. (see input_ids above)

Returns

A MultipleChoiceModelOutput or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) – Classification loss.

• logits (torch.FloatTensor of shape (batch_size, num_choices)) – num_choices is the second dimension of the input tensors. (see input_ids above).

  Classification scores (before SoftMax).

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

MultipleChoiceModelOutput or tuple(torch.FloatTensor)

Example:

>>> from transformers import AlbertTokenizer, AlbertForMultipleChoice
>>> import torch

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = AlbertForMultipleChoice.from_pretrained('albert-base-v2')

>>> prompt = "In Italy, pizza served in formal settings, such as at a restaurant, is presented unsliced."
>>> choice0 = "It is eaten with a fork and a knife."
>>> choice1 = "It is eaten while held in the hand."
>>> labels = torch.tensor(0).unsqueeze(0)  # choice0 is correct (according to Wikipedia ;)), batch size 1

>>> encoding = tokenizer([prompt, prompt], [choice0, choice1], return_tensors='pt', padding=True)
>>> outputs = model(**{k: v.unsqueeze(0) for k,v in encoding.items()}, labels=labels)  # batch size is 1

>>> # the linear classifier still needs to be trained
>>> loss = outputs.loss
>>> logits = outputs.logits

AlbertForTokenClassification

class transformers.AlbertForTokenClassification(config)

Albert Model with a token classification head on top (a linear layer on top of the hidden-states output) e.g. for Named-Entity-Recognition (NER) tasks.

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

forward(input_ids=None, attention_mask=None, token_type_ids=None, position_ids=None, head_mask=None, inputs_embeds=None, labels=None, output_attentions=None, output_hidden_states=None, return_dict=None)

The AlbertForTokenClassification forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (torch.LongTensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (torch.FloatTensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple.

• labels (torch.LongTensor of shape (batch_size, sequence_length), optional) – Labels for computing the token classification loss. Indices should be in [0, ..., config.num_labels - 1].

Returns

A TokenClassifierOutput or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) – Classification loss.

• logits (torch.FloatTensor of shape (batch_size, sequence_length, config.num_labels)) – Classification scores (before SoftMax).

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

TokenClassifierOutput or tuple(torch.FloatTensor)

Example:

>>> from transformers import AlbertTokenizer, AlbertForTokenClassification
>>> import torch

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = AlbertForTokenClassification.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="pt")
>>> labels = torch.tensor([1] * inputs["input_ids"].size(1)).unsqueeze(0)  # Batch size 1

>>> outputs = model(**inputs, labels=labels)
>>> loss = outputs.loss
>>> logits = outputs.logits

AlbertForQuestionAnswering

class transformers.AlbertForQuestionAnswering(config)

Albert Model with a span classification head on top for extractive question-answering tasks like SQuAD (a linear layers on top of the hidden-states output to compute span start logits and span end logits).

This model inherits from PreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a PyTorch torch.nn.Module subclass. Use it as a regular PyTorch Module and refer to the PyTorch documentation for all matter related to general usage and behavior.

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

forward(input_ids=None, attention_mask=None, token_type_ids=None, position_ids=None, head_mask=None, inputs_embeds=None, start_positions=None, end_positions=None, output_attentions=None, output_hidden_states=None, return_dict=None)

The AlbertForQuestionAnswering forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (torch.LongTensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (torch.FloatTensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (torch.LongTensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (torch.FloatTensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (torch.FloatTensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple.

• start_positions (torch.LongTensor of shape (batch_size,), optional) – Labels for position (index) of the start of the labelled span for computing the token classification loss. Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence are not taken into account for computing the loss.

• end_positions (torch.LongTensor of shape (batch_size,), optional) – Labels for position (index) of the end of the labelled span for computing the token classification loss. Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence are not taken into account for computing the loss.

Returns

A QuestionAnsweringModelOutput or a tuple of torch.FloatTensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (torch.FloatTensor of shape (1,), optional, returned when labels is provided) – Total span extraction loss is the sum of a Cross-Entropy for the start and end positions.

• start_logits (torch.FloatTensor of shape (batch_size, sequence_length)) – Span-start scores (before SoftMax).

• end_logits (torch.FloatTensor of shape (batch_size, sequence_length)) – Span-end scores (before SoftMax).

• hidden_states (tuple(torch.FloatTensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of torch.FloatTensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(torch.FloatTensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of torch.FloatTensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

QuestionAnsweringModelOutput or tuple(torch.FloatTensor)

Example:

>>> from transformers import AlbertTokenizer, AlbertForQuestionAnswering
>>> import torch

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = AlbertForQuestionAnswering.from_pretrained('albert-base-v2')

>>> question, text = "Who was Jim Henson?", "Jim Henson was a nice puppet"
>>> inputs = tokenizer(question, text, return_tensors='pt')
>>> start_positions = torch.tensor([1])
>>> end_positions = torch.tensor([3])

>>> outputs = model(**inputs, start_positions=start_positions, end_positions=end_positions)
>>> loss = outputs.loss
>>> start_scores = outputs.start_logits
>>> end_scores = outputs.end_logits

TFAlbertModel

class transformers.TFAlbertModel(*args, **kwargs)

The bare Albert Model transformer outputting raw hidden-states without any specific head on top.

This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a tf.keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.

Note

TF 2.0 models accepts two formats as inputs:

• having all inputs as keyword arguments (like PyTorch models), or

• having all inputs as a list, tuple or dict in the first positional arguments.

This second option is useful when using tf.keras.Model.fit() method which currently requires having all the tensors in the first argument of the model call function: model(inputs).

If you choose this second option, there are three possibilities you can use to gather all the input Tensors in the first positional argument :

• a single Tensor with input_ids only and nothing else: model(inputs_ids)

• a list of varying length with one or several input Tensors IN THE ORDER given in the docstring: model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])

• a dictionary with one or several input Tensors associated to the input names given in the docstring: model({"input_ids": input_ids, "token_type_ids": token_type_ids})

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

call(input_ids: Optional[Union[List[tensorflow.python.framework.ops.Tensor], List[numpy.ndarray], Dict[str, tensorflow.python.framework.ops.Tensor], Dict[str, numpy.ndarray], numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, attention_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, token_type_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, position_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, head_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, inputs_embeds: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, output_attentions: Optional[bool] = None, output_hidden_states: Optional[bool] = None, return_dict: Optional[bool] = None, training: Optional[bool] = False, **kwargs) → Union[transformers.modeling_tf_outputs.TFBaseModelOutputWithPooling, Tuple[tensorflow.python.framework.ops.Tensor]]

The TFAlbertModel forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in eager mode, in graph mode the value will always be set to True.

• training (bool, optional, defaults to False) – Whether or not to use the model in training mode (some modules like dropout modules have different behaviors between training and evaluation).

Returns

A TFBaseModelOutputWithPooling or a tuple of tf.Tensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• last_hidden_state (tf.Tensor of shape (batch_size, sequence_length, hidden_size)) – Sequence of hidden-states at the output of the last layer of the model.

• pooler_output (tf.Tensor of shape (batch_size, hidden_size)) – Last layer hidden-state of the first token of the sequence (classification token) further processed by a Linear layer and a Tanh activation function. The Linear layer weights are trained from the next sentence prediction (classification) objective during pretraining.

  This output is usually not a good summary of the semantic content of the input, you’re often better with averaging or pooling the sequence of hidden-states for the whole input sequence.

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

TFBaseModelOutputWithPooling or tuple(tf.Tensor)

Example:

>>> from transformers import AlbertTokenizer, TFAlbertModel
>>> import tensorflow as tf

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = TFAlbertModel.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="tf")
>>> outputs = model(inputs)

>>> last_hidden_states = outputs.last_hidden_state

TFAlbertForPreTraining

class transformers.TFAlbertForPreTraining(*args, **kwargs)

Albert Model with two heads on top for pretraining: a masked language modeling head and a sentence order prediction (classification) head.

This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a tf.keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.

Note

TF 2.0 models accepts two formats as inputs:

• having all inputs as keyword arguments (like PyTorch models), or

• having all inputs as a list, tuple or dict in the first positional arguments.

This second option is useful when using tf.keras.Model.fit() method which currently requires having all the tensors in the first argument of the model call function: model(inputs).

If you choose this second option, there are three possibilities you can use to gather all the input Tensors in the first positional argument :

• a single Tensor with input_ids only and nothing else: model(inputs_ids)

• a list of varying length with one or several input Tensors IN THE ORDER given in the docstring: model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])

• a dictionary with one or several input Tensors associated to the input names given in the docstring: model({"input_ids": input_ids, "token_type_ids": token_type_ids})

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

call(input_ids: Optional[Union[List[tensorflow.python.framework.ops.Tensor], List[numpy.ndarray], Dict[str, tensorflow.python.framework.ops.Tensor], Dict[str, numpy.ndarray], numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, attention_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, token_type_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, position_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, head_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, inputs_embeds: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, output_attentions: Optional[bool] = None, output_hidden_states: Optional[bool] = None, return_dict: Optional[bool] = None, labels: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, sentence_order_label: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, training: Optional[bool] = False, **kwargs) → Union[transformers.models.albert.modeling_tf_albert.TFAlbertForPreTrainingOutput, Tuple[tensorflow.python.framework.ops.Tensor]]

The TFAlbertForPreTraining forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in eager mode, in graph mode the value will always be set to True.

• training (bool, optional, defaults to False) – Whether or not to use the model in training mode (some modules like dropout modules have different behaviors between training and evaluation).

Returns

A TFAlbertForPreTrainingOutput or a tuple of tf.Tensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• prediction_logits (tf.Tensor of shape (batch_size, sequence_length, config.vocab_size)) – Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).

• sop_logits (tf.Tensor of shape (batch_size, 2)) – Prediction scores of the next sequence prediction (classification) head (scores of True/False continuation before SoftMax).

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Example:

>>> import tensorflow as tf
>>> from transformers import AlbertTokenizer, TFAlbertForPreTraining

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = TFAlbertForPreTraining.from_pretrained('albert-base-v2')

>>> input_ids = tf.constant(tokenizer.encode("Hello, my dog is cute", add_special_tokens=True))[None, :]  # Batch size 1
>>> outputs = model(input_ids)

>>> prediction_logits = outputs.prediction_logits
>>> sop_logits = outputs.sop_logits

Return type

TFAlbertForPreTrainingOutput or tuple(tf.Tensor)

TFAlbertForMaskedLM

class transformers.TFAlbertForMaskedLM(*args, **kwargs)

Albert Model with a language modeling head on top.

This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a tf.keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.

Note

TF 2.0 models accepts two formats as inputs:

• having all inputs as keyword arguments (like PyTorch models), or

• having all inputs as a list, tuple or dict in the first positional arguments.

This second option is useful when using tf.keras.Model.fit() method which currently requires having all the tensors in the first argument of the model call function: model(inputs).

If you choose this second option, there are three possibilities you can use to gather all the input Tensors in the first positional argument :

• a single Tensor with input_ids only and nothing else: model(inputs_ids)

• a list of varying length with one or several input Tensors IN THE ORDER given in the docstring: model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])

• a dictionary with one or several input Tensors associated to the input names given in the docstring: model({"input_ids": input_ids, "token_type_ids": token_type_ids})

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

call(input_ids: Optional[Union[List[tensorflow.python.framework.ops.Tensor], List[numpy.ndarray], Dict[str, tensorflow.python.framework.ops.Tensor], Dict[str, numpy.ndarray], numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, attention_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, token_type_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, position_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, head_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, inputs_embeds: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, output_attentions: Optional[bool] = None, output_hidden_states: Optional[bool] = None, return_dict: Optional[bool] = None, labels: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, training: Optional[bool] = False, **kwargs) → Union[transformers.modeling_tf_outputs.TFMaskedLMOutput, Tuple[tensorflow.python.framework.ops.Tensor]]

The TFAlbertForMaskedLM forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in eager mode, in graph mode the value will always be set to True.

• training (bool, optional, defaults to False) – Whether or not to use the model in training mode (some modules like dropout modules have different behaviors between training and evaluation).

• labels (tf.Tensor of shape (batch_size, sequence_length), optional) – Labels for computing the masked language modeling loss. Indices should be in [-100, 0, ..., config.vocab_size] (see input_ids docstring) Tokens with indices set to -100 are ignored (masked), the loss is only computed for the tokens with labels in [0, ..., config.vocab_size]

Returns

A TFMaskedLMOutput or a tuple of tf.Tensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (tf.Tensor of shape (n,), optional, where n is the number of non-masked labels, returned when labels is provided) – Masked language modeling (MLM) loss.

• logits (tf.Tensor of shape (batch_size, sequence_length, config.vocab_size)) – Prediction scores of the language modeling head (scores for each vocabulary token before SoftMax).

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

TFMaskedLMOutput or tuple(tf.Tensor)

Example:

>>> from transformers import AlbertTokenizer, TFAlbertForMaskedLM
>>> import tensorflow as tf

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = TFAlbertForMaskedLM.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("The capital of France is [MASK].", return_tensors="tf")
>>> inputs["labels"] = tokenizer("The capital of France is Paris.", return_tensors="tf")["input_ids"]

>>> outputs = model(inputs)
>>> loss = outputs.loss
>>> logits = outputs.logits

TFAlbertForSequenceClassification

class transformers.TFAlbertForSequenceClassification(*args, **kwargs)

Albert Model transformer with a sequence classification/regression head on top (a linear layer on top of the pooled output) e.g. for GLUE tasks.

This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a tf.keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.

Note

TF 2.0 models accepts two formats as inputs:

• having all inputs as keyword arguments (like PyTorch models), or

• having all inputs as a list, tuple or dict in the first positional arguments.

This second option is useful when using tf.keras.Model.fit() method which currently requires having all the tensors in the first argument of the model call function: model(inputs).

If you choose this second option, there are three possibilities you can use to gather all the input Tensors in the first positional argument :

• a single Tensor with input_ids only and nothing else: model(inputs_ids)

• a list of varying length with one or several input Tensors IN THE ORDER given in the docstring: model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])

• a dictionary with one or several input Tensors associated to the input names given in the docstring: model({"input_ids": input_ids, "token_type_ids": token_type_ids})

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

call(input_ids: Optional[Union[List[tensorflow.python.framework.ops.Tensor], List[numpy.ndarray], Dict[str, tensorflow.python.framework.ops.Tensor], Dict[str, numpy.ndarray], numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, attention_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, token_type_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, position_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, head_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, inputs_embeds: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, output_attentions: Optional[bool] = None, output_hidden_states: Optional[bool] = None, return_dict: Optional[bool] = None, labels: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, training: Optional[bool] = False, **kwargs) → Union[transformers.modeling_tf_outputs.TFSequenceClassifierOutput, Tuple[tensorflow.python.framework.ops.Tensor]]

The TFAlbertForSequenceClassification forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in eager mode, in graph mode the value will always be set to True.

• training (bool, optional, defaults to False) – Whether or not to use the model in training mode (some modules like dropout modules have different behaviors between training and evaluation).

• labels (tf.Tensor of shape (batch_size,), optional) – Labels for computing the sequence classification/regression loss. Indices should be in [0, ..., config.num_labels - 1]. If config.num_labels == 1 a regression loss is computed (Mean-Square loss), If config.num_labels > 1 a classification loss is computed (Cross-Entropy).

Returns

A TFSequenceClassifierOutput or a tuple of tf.Tensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (tf.Tensor of shape (batch_size, ), optional, returned when labels is provided) – Classification (or regression if config.num_labels==1) loss.

• logits (tf.Tensor of shape (batch_size, config.num_labels)) – Classification (or regression if config.num_labels==1) scores (before SoftMax).

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

TFSequenceClassifierOutput or tuple(tf.Tensor)

Example:

>>> from transformers import AlbertTokenizer, TFAlbertForSequenceClassification
>>> import tensorflow as tf

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = TFAlbertForSequenceClassification.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="tf")
>>> inputs["labels"] = tf.reshape(tf.constant(1), (-1, 1)) # Batch size 1

>>> outputs = model(inputs)
>>> loss = outputs.loss
>>> logits = outputs.logits

TFAlbertForMultipleChoice

class transformers.TFAlbertForMultipleChoice(*args, **kwargs)

Albert Model with a multiple choice classification head on top (a linear layer on top of the pooled output and a softmax) e.g. for RocStories/SWAG tasks.

This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a tf.keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.

Note

TF 2.0 models accepts two formats as inputs:

• having all inputs as keyword arguments (like PyTorch models), or

• having all inputs as a list, tuple or dict in the first positional arguments.

This second option is useful when using tf.keras.Model.fit() method which currently requires having all the tensors in the first argument of the model call function: model(inputs).

If you choose this second option, there are three possibilities you can use to gather all the input Tensors in the first positional argument :

• a single Tensor with input_ids only and nothing else: model(inputs_ids)

• a list of varying length with one or several input Tensors IN THE ORDER given in the docstring: model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])

• a dictionary with one or several input Tensors associated to the input names given in the docstring: model({"input_ids": input_ids, "token_type_ids": token_type_ids})

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

call(input_ids: Optional[Union[List[tensorflow.python.framework.ops.Tensor], List[numpy.ndarray], Dict[str, tensorflow.python.framework.ops.Tensor], Dict[str, numpy.ndarray], numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, attention_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, token_type_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, position_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, head_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, inputs_embeds: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, output_attentions: Optional[bool] = None, output_hidden_states: Optional[bool] = None, return_dict: Optional[bool] = None, labels: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, training: Optional[bool] = False, **kwargs) → Union[transformers.modeling_tf_outputs.TFMultipleChoiceModelOutput, Tuple[tensorflow.python.framework.ops.Tensor]]

The TFAlbertForMultipleChoice forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (Numpy array or tf.Tensor of shape (batch_size, num_choices, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (Numpy array or tf.Tensor of shape (batch_size, num_choices, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (Numpy array or tf.Tensor of shape (batch_size, num_choices, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (Numpy array or tf.Tensor of shape (batch_size, num_choices, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (tf.Tensor of shape (batch_size, num_choices, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in eager mode, in graph mode the value will always be set to True.

• training (bool, optional, defaults to False) – Whether or not to use the model in training mode (some modules like dropout modules have different behaviors between training and evaluation).

• labels (tf.Tensor of shape (batch_size,), optional) – Labels for computing the multiple choice classification loss. Indices should be in [0, ..., num_choices] where num_choices is the size of the second dimension of the input tensors. (See input_ids above)

Returns

A TFMultipleChoiceModelOutput or a tuple of tf.Tensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (tf.Tensor of shape (batch_size, ), optional, returned when labels is provided) – Classification loss.

• logits (tf.Tensor of shape (batch_size, num_choices)) – num_choices is the second dimension of the input tensors. (see input_ids above).

  Classification scores (before SoftMax).

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

TFMultipleChoiceModelOutput or tuple(tf.Tensor)

Example:

>>> from transformers import AlbertTokenizer, TFAlbertForMultipleChoice
>>> import tensorflow as tf

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = TFAlbertForMultipleChoice.from_pretrained('albert-base-v2')

>>> prompt = "In Italy, pizza served in formal settings, such as at a restaurant, is presented unsliced."
>>> choice0 = "It is eaten with a fork and a knife."
>>> choice1 = "It is eaten while held in the hand."

>>> encoding = tokenizer([prompt, prompt], [choice0, choice1], return_tensors='tf', padding=True)
>>> inputs = {k: tf.expand_dims(v, 0) for k, v in encoding.items()}
>>> outputs = model(inputs)  # batch size is 1

>>> # the linear classifier still needs to be trained
>>> logits = outputs.logits

TFAlbertForTokenClassification

class transformers.TFAlbertForTokenClassification(*args, **kwargs)

Albert Model with a token classification head on top (a linear layer on top of the hidden-states output) e.g. for Named-Entity-Recognition (NER) tasks.

This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a tf.keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.

Note

TF 2.0 models accepts two formats as inputs:

• having all inputs as keyword arguments (like PyTorch models), or

• having all inputs as a list, tuple or dict in the first positional arguments.

This second option is useful when using tf.keras.Model.fit() method which currently requires having all the tensors in the first argument of the model call function: model(inputs).

If you choose this second option, there are three possibilities you can use to gather all the input Tensors in the first positional argument :

• a single Tensor with input_ids only and nothing else: model(inputs_ids)

• a list of varying length with one or several input Tensors IN THE ORDER given in the docstring: model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])

• a dictionary with one or several input Tensors associated to the input names given in the docstring: model({"input_ids": input_ids, "token_type_ids": token_type_ids})

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

call(input_ids: Optional[Union[List[tensorflow.python.framework.ops.Tensor], List[numpy.ndarray], Dict[str, tensorflow.python.framework.ops.Tensor], Dict[str, numpy.ndarray], numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, attention_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, token_type_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, position_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, head_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, inputs_embeds: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, output_attentions: Optional[bool] = None, output_hidden_states: Optional[bool] = None, return_dict: Optional[bool] = None, labels: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, training: Optional[bool] = False, **kwargs) → Union[transformers.modeling_tf_outputs.TFTokenClassifierOutput, Tuple[tensorflow.python.framework.ops.Tensor]]

The TFAlbertForTokenClassification forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in eager mode, in graph mode the value will always be set to True.

• training (bool, optional, defaults to False) – Whether or not to use the model in training mode (some modules like dropout modules have different behaviors between training and evaluation).

• labels (tf.Tensor of shape (batch_size, sequence_length), optional) – Labels for computing the token classification loss. Indices should be in [0, ..., config.num_labels - 1].

Returns

A TFTokenClassifierOutput or a tuple of tf.Tensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (tf.Tensor of shape (n,), optional, where n is the number of unmasked labels, returned when labels is provided) – Classification loss.

• logits (tf.Tensor of shape (batch_size, sequence_length, config.num_labels)) – Classification scores (before SoftMax).

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

TFTokenClassifierOutput or tuple(tf.Tensor)

Example:

>>> from transformers import AlbertTokenizer, TFAlbertForTokenClassification
>>> import tensorflow as tf

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = TFAlbertForTokenClassification.from_pretrained('albert-base-v2')

>>> inputs = tokenizer("Hello, my dog is cute", return_tensors="tf")
>>> input_ids = inputs["input_ids"]
>>> inputs["labels"] = tf.reshape(tf.constant([1] * tf.size(input_ids).numpy()), (-1, tf.size(input_ids))) # Batch size 1

>>> outputs = model(inputs)
>>> loss = outputs.loss
>>> logits = outputs.logits

TFAlbertForQuestionAnswering

class transformers.TFAlbertForQuestionAnswering(*args, **kwargs)

Albert Model with a span classification head on top for extractive question-answering tasks like SQuAD (a linear layer on top of the hidden-states output to compute span start logits and span end logits).

This model inherits from TFPreTrainedModel. Check the superclass documentation for the generic methods the library implements for all its model (such as downloading or saving, resizing the input embeddings, pruning heads etc.)

This model is also a tf.keras.Model subclass. Use it as a regular TF 2.0 Keras Model and refer to the TF 2.0 documentation for all matter related to general usage and behavior.

Note

TF 2.0 models accepts two formats as inputs:

• having all inputs as keyword arguments (like PyTorch models), or

• having all inputs as a list, tuple or dict in the first positional arguments.

This second option is useful when using tf.keras.Model.fit() method which currently requires having all the tensors in the first argument of the model call function: model(inputs).

If you choose this second option, there are three possibilities you can use to gather all the input Tensors in the first positional argument :

• a single Tensor with input_ids only and nothing else: model(inputs_ids)

• a list of varying length with one or several input Tensors IN THE ORDER given in the docstring: model([input_ids, attention_mask]) or model([input_ids, attention_mask, token_type_ids])

• a dictionary with one or several input Tensors associated to the input names given in the docstring: model({"input_ids": input_ids, "token_type_ids": token_type_ids})

Parameters

config (AlbertConfig) – Model configuration class with all the parameters of the model. Initializing with a config file does not load the weights associated with the model, only the configuration. Check out the from_pretrained() method to load the model weights.

call(input_ids: Optional[Union[List[tensorflow.python.framework.ops.Tensor], List[numpy.ndarray], Dict[str, tensorflow.python.framework.ops.Tensor], Dict[str, numpy.ndarray], numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, attention_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, token_type_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, position_ids: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, head_mask: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, inputs_embeds: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, output_attentions: Optional[bool] = None, output_hidden_states: Optional[bool] = None, return_dict: Optional[bool] = None, start_positions: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, end_positions: Optional[Union[numpy.ndarray, tensorflow.python.framework.ops.Tensor]] = None, training: Optional[bool] = False, **kwargs) → Union[transformers.modeling_tf_outputs.TFQuestionAnsweringModelOutput, Tuple[tensorflow.python.framework.ops.Tensor]]

The TFAlbertForQuestionAnswering forward method, overrides the __call__() special method.

Note

Although the recipe for forward pass needs to be defined within this function, one should call the Module instance afterwards instead of this since the former takes care of running the pre and post processing steps while the latter silently ignores them.

Parameters

• input_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length)) –

  Indices of input sequence tokens in the vocabulary.

  Indices can be obtained using AlbertTokenizer. See transformers.PreTrainedTokenizer.__call__() and transformers.PreTrainedTokenizer.encode() for details.

  What are input IDs?

• attention_mask (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Mask to avoid performing attention on padding token indices. Mask values selected in [0, 1]:

  • 1 for tokens that are not masked,

  • 0 for tokens that are masked.

  What are attention masks?

• token_type_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Segment token indices to indicate first and second portions of the inputs. Indices are selected in [0, 1]:

  • 0 corresponds to a sentence A token,

  • 1 corresponds to a sentence B token.

  What are token type IDs?

• position_ids (Numpy array or tf.Tensor of shape (batch_size, sequence_length), optional) –

  Indices of positions of each input sequence tokens in the position embeddings. Selected in the range [0, config.max_position_embeddings - 1].

  What are position IDs?

• head_mask (Numpy array or tf.Tensor of shape (num_heads,) or (num_layers, num_heads), optional) –

  Mask to nullify selected heads of the self-attention modules. Mask values selected in [0, 1]:

  • 1 indicates the head is not masked,

  • 0 indicates the head is masked.

• inputs_embeds (tf.Tensor of shape (batch_size, sequence_length, hidden_size), optional) – Optionally, instead of passing input_ids you can choose to directly pass an embedded representation. This is useful if you want more control over how to convert input_ids indices into associated vectors than the model’s internal embedding lookup matrix.

• output_attentions (bool, optional) – Whether or not to return the attentions tensors of all attention layers. See attentions under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• output_hidden_states (bool, optional) – Whether or not to return the hidden states of all layers. See hidden_states under returned tensors for more detail. This argument can be used only in eager mode, in graph mode the value in the config will be used instead.

• return_dict (bool, optional) – Whether or not to return a ModelOutput instead of a plain tuple. This argument can be used in eager mode, in graph mode the value will always be set to True.

• training (bool, optional, defaults to False) – Whether or not to use the model in training mode (some modules like dropout modules have different behaviors between training and evaluation).

• start_positions (tf.Tensor of shape (batch_size,), optional) – Labels for position (index) of the start of the labelled span for computing the token classification loss. Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence are not taken into account for computing the loss.

• end_positions (tf.Tensor of shape (batch_size,), optional) – Labels for position (index) of the end of the labelled span for computing the token classification loss. Positions are clamped to the length of the sequence (sequence_length). Position outside of the sequence are not taken into account for computing the loss.

Returns

A TFQuestionAnsweringModelOutput or a tuple of tf.Tensor (if return_dict=False is passed or when config.return_dict=False) comprising various elements depending on the configuration (AlbertConfig) and inputs.

• loss (tf.Tensor of shape (batch_size, ), optional, returned when start_positions and end_positions are provided) – Total span extraction loss is the sum of a Cross-Entropy for the start and end positions.

• start_logits (tf.Tensor of shape (batch_size, sequence_length)) – Span-start scores (before SoftMax).

• end_logits (tf.Tensor of shape (batch_size, sequence_length)) – Span-end scores (before SoftMax).

• hidden_states (tuple(tf.Tensor), optional, returned when output_hidden_states=True is passed or when config.output_hidden_states=True) – Tuple of tf.Tensor (one for the output of the embeddings + one for the output of each layer) of shape (batch_size, sequence_length, hidden_size).

  Hidden-states of the model at the output of each layer plus the initial embedding outputs.

• attentions (tuple(tf.Tensor), optional, returned when output_attentions=True is passed or when config.output_attentions=True) – Tuple of tf.Tensor (one for each layer) of shape (batch_size, num_heads, sequence_length, sequence_length).

  Attentions weights after the attention softmax, used to compute the weighted average in the self-attention heads.

Return type

TFQuestionAnsweringModelOutput or tuple(tf.Tensor)

Example:

>>> from transformers import AlbertTokenizer, TFAlbertForQuestionAnswering
>>> import tensorflow as tf

>>> tokenizer = AlbertTokenizer.from_pretrained('albert-base-v2')
>>> model = TFAlbertForQuestionAnswering.from_pretrained('albert-base-v2')

>>> question, text = "Who was Jim Henson?", "Jim Henson was a nice puppet"
>>> input_dict = tokenizer(question, text, return_tensors='tf')
>>> outputs = model(input_dict)
>>> start_logits = outputs.start_logits
>>> end_logits = outputs.end_logits

>>> all_tokens = tokenizer.convert_ids_to_tokens(input_dict["input_ids"].numpy()[0])
>>> answer = ' '.join(all_tokens[tf.math.argmax(start_logits, 1)[0] : tf.math.argmax(end_logits, 1)[0]+1])