Enter your text,output,flag,username,timestamp How do I turn off PoE on a specified port,"' To turn off PoE on a specified port, use the lanpower service command with the OFF parameter. For example: lanpower service OFF.",,,2023-07-27 12:51:00.095631 "Tell me how would I enable POE on ports 20 through 24 on an OS6860-P24? You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide","' To enable POE on ports 20 through 24 on an OS6860-P24, you can use the command: lanpower port 1/1/20-24 power-over-hdmi enable.",,,2023-08-03 10:34:17.298069 "Tell me how to give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide ","' -> lanpower port 8-12 priority critical -> lanpower port 13-16 priority high",,,2023-08-03 10:50:25.970226 "Tell me how to give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide If no chassis or switch is specified, assume 1/1 The","' To give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high, you would need to use the lanpower priority command. For ports 8-12, you would use the command ""lanpower slot 1/1 priority critical 8-12"" and for ports 13-16, you would use the command ""lanpower slot 1/1 priority high 13-16"".",,,2023-08-03 10:52:09.260862 "Tell me how to give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide If no chassis or switch is specified, assume 1/1 The priority level should follow the port in the command ","' To give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high, you would use the following command: lanpower slot 1/1 port 8-12 priority critical port 13-16 priority high",,,2023-08-03 10:59:38.573537 "Tell me how to give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide If no chassis or switch is specified, assume 1/1 The priority level should follow the port in the command If there are two different ranges, there should be two different commands.","' To give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high, you would use the following commands: lanpower port 1/1/8-12 priority critical lanpower port 1/1/13-16 priority high",,,2023-08-03 13:35:38.255124 "Tell me how to give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide If no chassis or switch is specified, assume 1/1 The priority level should follow the port in the command If there are two different ranges, there should be two different commands.","' To give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high, you would use the following commands: lanpower port 1/1/8-12 priority critical lanpower port 1/1/13-16 priority high",,,2023-08-03 13:37:15.655022 "Tell me how to give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide If no chassis or switch is specified, assume 1/1 The priority level should follow the port in the command If there are two different ranges, there should be two different commands.","' To give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high, you would use the following commands: lanpower port 1/1/8-12 priority critical lanpower port 1/1/13-16 priority high",,,2023-08-03 13:37:20.296806 "Tell me how to give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide If no chassis or switch is specified, assume 1/1 The priority level should follow the port in the command If there are two different ranges, there should be two different commands.","' To give ports 8-12 a PoE priority of critical and ports 13-16 a priority of high, you would use the following commands: lanpower port 1/1/8-12 priority critical lanpower port 1/1/13-16 priority high",,,2023-08-03 13:39:36.603542 "Tell me how to give ports the network interface on chassis 1 a priority of high This is not switch or port specific, I would like all of chassis 1 to be given a priority of high That is incorrect, the correct command is "" ","To give ports on chassis 1 a priority of high, use the command ""lanpower chassis 1 priority high"". This will set the priority of all ports on chassis 1 to high.",,,2023-08-03 13:51:24.092423 "Tell me how to give ports the network interface on chassis 1 a priority of high If no switch/slot or port is given, assume that all of the network interface on chassis 1 is given a priority of high ",lanpower chassis 1 priority high,,,2023-08-03 13:55:20.523202 "Tell me how to give ports the network interface on chassis 1 a priority of high that is incorrect, the correct command is ""lanpower chassis 1 ni-priority high"" ","To give ports on chassis 1 a priority of high, use the command ""lanpower chassis 1 priority high"".",,,2023-08-03 13:56:01.392855 "Tell me how to give ports the network interface on chassis 1 a priority of high that is incorrect, the correct command is ""lanpower chassis 1 ni-priority high"" ","To give ports on chassis 1 a priority of high, use the command ""lanpower chassis 1 priority high"".",,,2023-08-03 13:56:09.593266 "Tell me how to give ports the network interface on chassis 1 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide ","' To give ports on chassis 1 a priority of high, you can use the command ""lanpower port 1/1/1 priority high"". This command will set the priority of the port to high, allowing it to receive higher priority traffic. Refer to the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide for more information.",,,2023-08-03 14:04:22.358377 "Tell me how to give ports the network interface on chassis 1 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide. ","' To give ports the network interface on chassis 1 a priority of high, use the command ""lanpower chassis 1 ni-priority high"".",,,2023-08-03 14:08:29.526782 "Tell me how to give ports the network interface on chassis 1 a priority of high You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide. ","' To give ports on chassis 1 a priority of high, you can use the command ""lanpower port 1/1/1 priority high"". This command will set the priority of the port to high, allowing it to receive more power than other ports on the same chassis. Refer to the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide for more information.",,,2023-08-03 14:08:38.319432 "How can I enable PoE power at 8 in the morning and turn it off at 8 in the evening You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide ","The command to enable PoE power at 8 in the morning and turn it off at 8 in the evening is: lanpower {slot chassis/slot} ppoe enable 8:00am 8:00pm",,,2023-08-03 15:19:09.542669 "What are the commands to enable PoE power at 8 in the morning and turn it off at 8 in the evening You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide ","' To enable PoE power at 8 in the morning and turn it off at 8 in the evening, you can use the following commands: At 8 in the morning: lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi enable At 8 in the evening: lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi disable",,,2023-08-03 15:29:48.494239 "How can I enable PoE power at 8 in the morning and turn it off at 8 in the evening You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide ","' To enable PoE power at 8 in the morning and turn it off at 8 in the evening, you can use the lanpower command to configure a schedule for the power over Ethernet (PoE) ports. You can use the lanpower command to set the start time and end time for the PoE ports. For example, you can use the command ""lanpower {slot chassis/slot | port chassis/slot/port -port} power-over-hdmi enable start-time 8:00 end-time 20:00"" to enable PoE power at 8 in the morning and turn it off at 8 in the evening. Please refer to the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide for more information.",,,2023-08-03 15:32:34.525783 "How can I enable PoE power at 8 in the morning and turn it off at 8 in the evening It must be two separate commands, the rule-name is DayTimePower and NoNightPower, respectively ","lanpower power-rule admin-state enable power on at time 08:00 days all months all timezone local-server lanpower power-rule admin-state enable power off at time 20:00 days all months all timezone local-server",,,2023-08-07 11:52:09.945899 "How can I enable PoE power at 8 in the morning and turn it off at 8 in the evening You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide It must be two separate commands ","To enable PoE power at 8 in the morning, you can use the command ""lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi enable"" To turn it off at 8 in the evening, you can use the command ""lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi disable""",,,2023-08-07 14:44:54.332020 "How can I enable PoE power at 8 in the morning and turn it off at 8 in the evening You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide It must be two separate commands ","To enable PoE power at 8 in the morning, you can use the command ""lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi enable"" To turn it off at 8 in the evening, you can use the command ""lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi disable""",,,2023-08-07 14:45:07.359102 "How can I enable PoE power at 8 in the morning and turn it off at 8 in the evening You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide It must be two separate commands ","To enable PoE power at 8 in the morning, you can use the command ""lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi enable"" To turn it off at 8 in the evening, you can use the command ""lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi disable""",,,2023-08-07 14:45:18.078918 "How can I enable PoE power at 8 in the morning and turn it off at 8 in the evening You are a ChatBot that is going to answer a user question based on the OmniSwitch AOS Release 8 CLI Reference Guide and the OmniSwitch 6860/6860E/6860N Hardware Users Guide There are 2 commands","1. lanpower {slot chassis/slot | port chassis/slot/port -port} power -over -hdmi {enable | disable} 2. show lanpower Displays the PoE status and related statistics for all ports in a specified slot. To enable PoE power at 8 in the morning and turn it off at 8 in the evening, you can use the lanpower command to enable PoE power at 8 in the morning and disable it at 8 in the evening. You can use the show lanpower command to check the PoE status and related statistics for all ports in a specified slot.",,,2023-08-07 14:54:33.843939