Registrants Project Checklist: Electrical Systems - Buildings

Buildings


Design ProfessionalsConstruction ProfessionalsLicensingbuilding UP

Project Guidelines: Skilled Trade/Registrant
Check License & Registration Status
Skilled Trades
Registrants

Project Guidelines: Skilled Trade/Registrant

Check License & Registration Status

Skilled Trades

Registrants


Registrants Project Checklists: Electrical Systems

Project Checklists contain project-specific details as they apply to the scope of work of the project to provide compliance with the NYC Construction Codes and other regulations. This section contains a list of tasks to assist with compliance.

Checklists include:

Pre-Permit Checklist

On-Going Project Work Checklist

Project Completion Close-out Checklist

Pre-Permit Checklist

Construction Drawings. Make sure the Department-approved drawings clearly convey the project scope of work and that the drawings align correctly with the contracted work.

Scope Modification. Verify if changes need an amendment.

Insurance Requirements. Comply with the insurance requirements for General Liability insurance, Workers Compensation and Disability insurance. When required, update the General Liability insurance.

Special and Progress Inspections. Confirm the Owner has hired the Special and/or Progress Inspection Agency and that the required inspection information has been submitted, which is required to obtain a work permit.

Get a printable version.

On-going Project Work Checklist

Construction Drawings. Work defined in the Construction Documents must conform to the scope of work approved in the permit application documents. Minor variations, however, are allowed – see Minor Variations Memorandum. Please note certain changes may require an amendment.

Scope Modification. Verify if changes need an amendment

Site Safety. To minimize the risk of accidents and fire during construction, the LME/Contractor must maintain his/her work site in a safe condition.

Special and Progress Inspections. Coordinate the work schedule with the SIA to assure inspections are completed as required for each stage of the work.

Department Inspections. Request or self-certify the required inspections, by the completion of each stage of construction and obtain DOB sign-off for the completed work.

Self-Certification. If self-certifying the required inspections, be sure to submit a Notice of Intent to Self-certify. Self-certification inspection may be audited and inspected.

Get a printable version.

Project Completion Close-out Checklist

Department Inspections. Request or self-certify the inspections required for each stage of construction, and obtain a sign-off for the completed work.

Self-Certification. If self-certifying the required inspections, be sure to submit a Notice of Intent to Self-certify, which may be audited.

As-Built Submission. Coordinate installation with RDP for submission (RDP to submit PAA as required).

Final Sign-off. Make sure to complete all Department inspections and obtain a final sign-off of the completed work.

Get a printable version.

Contractor Links

Checklists: Building Systems Installation & Modifications

Contractor Project Checklists

Contractor Project Requirements

Contractor Project Guidelines

Helpful Links

Project Categories

Key Points & Project Terms

Project Phases & Requirements

Project Checklists

Compliance & Violations

Information for Contractors

Insurance Guidelines

DOB NOW

Code Notes

Find Licensed Professionals