Project Checklist: Registered Design Professional - Construction Fence - Buildings

Buildings


Design ProfessionalsConstruction ProfessionalsLicensingbuilding UP

Project Guidelines for Design Professionals
Engineers (PE) & Architects (RA)
Local Law 108/2019

Project Guidelines for Design Professionals

Engineers (PE) & Architects (RA)

Local Law 108/2019


Design Professional Checklists:
Construction Fence

Regardless of how the project work is portioned out, administration of the work remains the responsibility of the Registered Design Professional or Registered Contractor, who is the Applicant of Record in ‘responsible charge’ or has verified Code compliance of the drawings and installations for the project. Although some specific projects that do not involve architectural or structural work, which may be completed by other types of NYS Registered Professionals, it is important that the design professional who is Applicant of Record maintain control of the entire project.

This section contains a list of tasks that provide compliance with the Codes and other regulations discussed in the Project Guidelines.

Checklists include:

Prior to Application Approval Checklist

Pre-Permit & On-going Project Work Checklist

Project Completion Close-out Checklist

Prior to Application Approval Checklist

Provide ‘reference only’ documents of legal existing conditions. These will speed up the plan review process for repairs by reducing comments and the frequency of repeat reviews.

Required Documents: Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a permit. The following documents must be submitted:

Plot/Lot diagram of streets and fence location(s)

Minimum design loads

Design drawings prepared by a NYS professional engineer or registered architect

DOT permit, if the fence exceeds a distance of 3 feet onto the sidewalk.

Get a printable version.

Pre-Permit & On-going Project Work Checklist

Pre-Permit

Required Documents: Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a DOB permit. DOT approval may be required.

On-going

Post Approval Amendments: If the approved work has substantive or significant changes, submit revised drawings and obtain a Post Approval Amendment (PAA).

Get a printable version.

Project Completion Close-out Checklist

Final Inspection: A final inspection to verify that the fence can be safely removed and/or was completely removed.

Get a printable version.

Design Professional Links

Construction Fence Requirements

Requirements: Construction Equipment

Checklists: Construction Equipment

Design Professional Project Checklists

Design Professional Project Requirements

Design Professional Project Guidelines

Helpful Links

Project Categories

Key Points & Project Terms

Project Phases & Requirements

Project Checklists

Compliance & Violations

Information for Master Plumbers

DOB NOW

Code Notes