Project Checklist: Registered Design Professional - Alterations - Builders Pavement Plan (BPP) - Buildings

Buildings


Design ProfessionalsConstruction ProfessionalsLicensingbuilding UP

Project Guidelines for Design Professionals
Engineers (PE) & Architects (RA)
Local Law 108/2019

Project Guidelines for Design Professionals

Engineers (PE) & Architects (RA)

Local Law 108/2019


Design Professional Checklists:
Builders Pavement Plan (BPP)

Regardless of how the project work is portioned out, administration of the work remains the responsibility of the Registered Design Professional (RDP) who is the Applicant of Record (Applicant) in responsible charge or has verified Code and Zoning compliance of the drawings and installations for the project. Although there may be some specific projects that do not involve architectural or structural work, which may be completed by other professionals, it is important that the RDP maintain control of the entire project and understand when this applies under Department and NYS regulations.

This section contains a list of tasks that provide compliance with the Construction Codes and other regulations discussed in the Project Guidelines.

Checklists include:

Prior to Application Approval Checklist

Pre-Permit & On-going Project Work Checklist

Project Completion Close-out Checklist

Prior to Application Approval Checklist

Provide ‘reference only’ documents of legal existing conditions. These will speed up the plan review process by reducing comments and the number of back and forth checks.

An Initial Survey that is no older than 90 days must be submitted.

Required Documents. Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a permit. The following documents must be submitted:

Site Plan/ Builders Pavement Plan

Architectural Survey

BPP-1 Checklist

ST-1 Street Tree Checklist

Colored photos signed, sealed and dated

Get a printable version.

Pre-Permit & On-going Project Work Checklist

Pre-Permit

Required Documents: Based on scope of work, supporting documents or deferred submittals must be completed in order to obtain a permit. The following may be required if applicable:

NYC Department of Transportation (DOT) approval

BPP-5 Authorization to DOT

On-going

Post Approval Amendments: If the approved work has substantive or significant changes, make sure to submit revised drawings and obtain a Post Approval Amendment (PAA).

Get a printable version.

Project Completion Close-out Checklist

As-Built Submission: If the completed project has changes that are not considered as minor and requires an “As-Built” submission, make sure to submit revised “As-Built” drawings prior to project sign-off.

Following completion of the project, a Final Survey showing the actual work must be submitted.

Final inspection conducted by DOB inspectors.

Required documents for sign-off:

BPP-8 Form

BPP-11 Affidavit

BPP-15 for waiver (if applicable)

BPP-16 for waiver (if applicable)

Final Survey

Get a printable version.

Design Professional Links

Builders Pavement Plan (BPP) Requirements

Requirements: Alterations

Checklists: Alterations

Design Professional Project Checklists

Design Professional Project Requirements

Design Professional Project Guidelines

Helpful Links

Project Categories

Key Points & Project Terms

Project Phases & Requirements

Project Checklists

Compliance & Violations

Information for Master Plumbers

Insurance Guidelines

DOB NOW

Code Notes