NYC DOT - Weekly Resurfacing Schedules

Milling is the process of grinding off the top layer of asphalt or surface of a roadway. This is usually done in preparation for paving, although there are exceptions where no milling or only partial milling is needed. Resurfacing is the process of placing an asphalt overlay on a roadway, whether or not it has been milled. The milling process is noisy and may cause discomfort in the affected neighborhood for several days. Much of the work is done at night in order to minimize disruptions to traffic. Although NYC DOT takes steps to minimize the inconvenience, milling requires trucks, special machinery and portable lights. To minimize disruption, machinery is fitted with noise reduction equipment and crews attempt to keep noise to a minimum.

February 9, 2025 to February 15, 2025

Schedules are subject to change due to inclement weather or emergencies.

Citywide Schedules

Arterial Milling & Resurfacing Schedule

Sidewalk Construction Schedule

Concrete/Hardware Repair Schedule

Borough Milling & Resurfacing Schedules

Bronx

Brooklyn

Manhattan

Queens

Staten Island

Work Zone Safety

NYC DOT keeps NYC moving. Help keep our crews safe.

Be Patient

Milling and paving may temporarily disrupt your routine for a short period of time, but street improvements will last for years to come.

Be Kind

Our crews are delivering a much-needed public service. Treat us like your neighbor. Harassment and physical violence will not be tolerated. Violators can and will be prosecuted.

Be Safe

Crossing into a work zone area can create unsafe conditions for you and our crews. Asphalt can reach temperatures of over 250 degrees Fahrenheit. Entering a work zone can damage personal property, or roadway, and ultimately delay work.