diff --git "a/automotive/dev.jsonl" "b/automotive/dev.jsonl"
new file mode 100644--- /dev/null
+++ "b/automotive/dev.jsonl"
@@ -0,0 +1,1000 @@
+{"text": "Ford Escape owners have reported 1,037 problems related to power train (under the power train category).\nPower steering assist fault light came on now I have no power steering, check fuel inlet light cover light keeps coming on, my transmission seems to lag alit and stuffers up hills and if I try to pass anyone.\nSee all problems of the 2010 Ford Escape.\nGreetings, I have a Ford Escape 2013, 2. 5 liters, and I almost crashed because the vehicle suffered an electrical malfunction. In the screen of the car it said: \"motor damage, turn off\". This almost caused me to loose my life, because the car lost all the energy, stopped in the middle of the highway, and the motor was hesitating. I looked for a recall and I found a Ford number 14s17-s1 but that recall is for 2. 0 liter and my Ford Escape 2013 is 2. 5 which means that it doesn't have the same electrical wire that is recalled from the 2. 0. I went to the dealer to find an answer, but the car does this malfunction intermittently and once you turn it back on the code disappears like if nothing would have happened. I took the paper of the recall to the dealer and they said that they cant do anything because the code disappeared and my car doesn't have the same system of the 2. 0 liter.\nSee all problems of the 2013 Ford Escape.\nWhile driving, the carboard noticed several signs and the speedometer dropped to zero. Also, on other days, I could not start the car.\nSee all problems of the 2008 Ford Escape.\nI was driving on a freeway at 65mph and the engine cuts out to an idle. The check engine light came on. I almost got rear ended getting the car over to the side of the road since it lost all power. After pulling over I was able to start the car as the light went out. This happened 3 more times where the car would cut out to a rough idle, these occurred while I was on city streets but almost caused 1 accident as it cut out. After shutting the car off it would restart with no issue. This last time the car had to be towed to planet Ford to be repaired. They said it was a throttle body issue and it cost me over 700 for the repair even though it is still under the powertrain warranty. I do not see why this has not been recalled due to the car being unsafe to drive and I do not know why the replacement of the part alone will not cause further stalls of this vehicle. I have found other people with the same issue where the car goes into \"limp home\" mode. I am currently having the car repaired or I would be able to attach the invoice for the throttle body repair.\n100300 miles on my 2008 Escape. Car struggles to change from 1st to 2nd gear. Now power, engine revs up but gear will not change, I have to press the gas pedal then lift off, over and over before it changes gear. Car will jerk and almost lose power while in traffic.\n2013 Escape developed coolant leak. I saw online where this problem was a recall. When I took it in to the dealership they informed me that even though mine has the same problem my VIN# is not included in this recall! if Ford motor company knows they have this problem with this vehicle why are they not all covered? how many have to catch fire? also, they also tell me I have an oil leak in the turbo. I have never seen any evidence of an oil leak in this vehicle.\nWhile operating vehicle at approx 55 mph vehicle revolutions raced up to abt 6000 rpms. As attempting to accelrate to a higher interstate speed. . While operating on interstate 90.\nThe contact owns a 2007 Ford Escape. While driving 50 mph, the overdrive indicator illuminated, the transmission seized, and the vehicle stalled. The local dealer was not contacted. The manufacturer was notified of the issue, but did not offer assistance. The failure mileage was 171,000.\nSee all problems of the 2007 Ford Escape.\nWhile operating on interstate 90 ewd engine rpms went from abt 3000 rpm's to 5000 rpm, while attempting to accerlate from abt 65 mph to 70 mph.\nLoss of pressure in the top end resulting in failure of transmission. Was coasting into town (took foot off gas for lower speed limit) engine shifted hard and revs to high rpm and has no power.\nWhile driving on a highway with the cruise control set at 70 mph (speed limit), the engine on my car suddenly and without warning cut out. A message of 'your vehicle is not in park' appeared. I was able to make my way onto the berm of the road, close to an exit on the highway with the car's momentum. The car's engine was not running. I put the car in park, waited a moment to calm my nerves, and then restarted the car. I was able to get home, holding my breath the entire time, uncertain whether I would encounter the same problem. Cause of the problem - unknown. I have an appointment tomorrow at the Ford dealership where it was purchased. Twice before, this car was taken to the dealership because of a problem with accelerating from a stopped position. The car would \"buck\" as if it wasn't getting any fuel. The second visit resulted in no action from the service dept. As they could not recreate the issue. I asked specifically about codes from the car's computer, but was told there weren't any. I found this surprising because I drove directly to the dealership when this problem happened and the \"check engine\" message was on the entire trip there.\nSUV regularly overheats when accelerating up hill in warm weather. The SUV was purchased with the largest engine because we live in the mountains in warm California. When car overheats power is lost and we lose the ability to accelerate in an emergency safety condition. The car also runs rough and jerks once it cools down and power regains. The manufacturer has been contacted and even though they have been able to pull codes verifying the problem have not fixed it (or even attempted to fix it each time it is brought in. The car has a 3500 pound trailer rating. If a trailer was attached we would be on the side of the road in dangerous weather. Very unhappy with my $36,000 car with less than 17,000 miles on it.\nWhile accelerating vehicle on a highway on ramp,studdered, acted like issues going from 1st gear to 2nd gear. Unknown if power train isue or fuel/engine issue. Was looked at by shop same day problem would not reoccur. .\nNhtsa campaign number 14v16500. Lower control arm on the front passenger side lose, resulting in loss of steering control and increased risk of accident when driving. It may be due to rust and corrosion for the lose bolt that holds the underneath bracket.\nSee all problems of the 2004 Ford Escape.\nFirst complaint is the internal door panels do not properly fit and come loose becoming caught on the frame of the car not allowing you to open the door to exit the vehicle which is highly dangerous in an emergency. 2) the shift selector switch broke as my spouse was driving the car not allowing him to shift the car into park or shut it off. This is highly dangerous and quite common a mechanics told us.\nI was sold the car with a defective fuel pump and never warned that it needed to be recalled, therefore, I have been driving it for over a year with the possibility of it starting on fire. Also, recently the power train went on my car almost exactly one month after the warranty was up. After researching this issue it has come to my attention that many other Ford Escape owners have experienced this exact issue. I was even told by one mechanic that this is a known issue with Ford Escapes amongst mechanics. When the car is in motion it \"clunks\" and does not shift properly. I am concerned for the safety of others who may be driving these cars without the knowledge that there is something wrong with it.\nWas accelerating after coasting to slow down for a turn on city streets. Engine stalled out and service, oil, and battery lights all illuminated on the panel. Vehicle lost all power and had to coast to a stop. Put it in park, turned off and restarted with no issue. This is the 5th time this has happened in the last 18 months, all in simliar scenarios where accelerating after coasting.\nSee all problems of the 2009 Ford Escape.\nDriving on the highway, the \"wrench light appeared and suddenly the car jolted forward almost creating an accident by rapidly slowing the vehicle, once control was regained I moved to the side of the road. I was then able to get the vehicle home on \"limp\" mode, where the vehicle is restricted to prevent damage to the transmission. Upon looking at this site, I found the investigation for the 09-13 Ford Escape throttle body warranty, which the throttle body was diagnosed by a certified Ford garage on my vehicle, the part is the same from 05-13 on the 3l engine Escape models and seriously posed a threat to me while driving however since it is a 2008, not a 2009, Ford will not grant the dealership permission to replace the part free of charge, although the same part and same malfunction is acknowledged in the 09-13 models and is under and extended manufacturers warranty, listed under customer service program code \"13n03\".\nI purchased my Ford Escape certified used from a dealership back in July 2016, it had approximately 26,000 miles on the vehicle and no accidents reported. In February 2017 the vehicle starts hesitating while in motion on a country street, acting as though it was about to stall out, no warning indicators came up, able to get to our driveway. When in our driveway we were able to back up but when placed in drive the dash gave a warning that the vehicle was not in park and it would not move forward only in reverse. We got it towed by our Ford warranty to a local dealership where paperwork looks like they did an overhaul on the transmission. Now it July of 2017 (56,000 miles on it) while driving on a highway the car begins to hesitate again, I was able to get off an exit on the highway but then my car completely stopped. When the accelerator was pressed nothing happened. No warning indicators at all present on dash. I turned off the vehicle and turn it back on and the car was able to move an inch. When placed in the sport drive the car could not recognize it in drive as evidenced by it did not even light up the \"s\" on the dash to let you know it was in sport drive. Ford again towed my car to the local dealership where it is being inspected as we speak. I have had the car a total of 1 year and it has been at the dealership twice for transmission issues. Unacceptable, thank goodness both times I was able to get the vehicle to safety, I would not want to imagine what would happen if I was on a much larger highway and this occurred to the vehicle. These issues are making me feel very unsafe and uncomfortable driving the vehicle, especially when my two children are in the car with me.\nSee all problems of the 2015 Ford Escape.\nElectronic throttle body (etb) my 2009 Ford Escape will occasionally lurch/surge forward or stall out while I'm driving. I believe this is a problem that Ford addressed with an extended warranty a few years ago but I was not aware of this. I believe this is a safety issue and Ford should contact all owners!.\nThe contact owns a 2011 Ford Escape. While starting the vehicle, the engine independently revved. The vehicle was taken to the local dealer (norris Ford, 901 merritt blvd, baltimore, MD 21222) where it was diagnosed that the throttle body failed and the power train control module needed to be updated. The vehicle was not repaired due to the cost. The manufacturer was not notified. The failure mileage was approximately 60,000.\nSee all problems of the 2011 Ford Escape.\nI purchased a used 2015 Ford Escape on may 10, 2017. I drove it to yellowstone over memorial day weekend to test the vehicle out. The transmission would shift really hard and at 40 mph it seemed to hesitate what gear to shift to. I took it back to the dealership, who sent it to a Ford dealership and they reset the transmission. They said the car learns a driver's driving habits and since someone else owned the car it wasn't used to my driving habits. The reset on the transmission has help a little, I still do not like the way it shifts at 40 mph and it also hesitates to go and then when it kicks in it is hard to slow down. Yesterday July 5, 2017 I was driving back to work from lunch and my power steering failed. I had a warning come on at the same time I noticed the power steering was gone. I was glad I was on a back road or it could have caused and accident. I couldn't move the steering wheel. I had the vehicle towed to a Ford dealership. I have not heard anything regarding the issue yet. I have only had the car for almost 60 days and I have had it serviced twice. I don't feel I can trust this car. My 10 year old van with 170,000 miles is more reliable.\nWhile pulling out into traffic on July 3, 2017, moving at 30 mph, the engine suddenly lost all power and the transmission downshifted causing the car to quickly decelerate nearly causing a rear end collision. The engine warning light indicated an engine fault requiring immediate service. The engine continued running but with hardly any acceleration then loss of power and bucking. I pulled to shoulder and was able to limp home about a mile with engine running erratically all the way. Called aaa and had vehicle towed to hammonasset Ford in madison CT for service on July 4 2017. Awaiting response from them at this time.\nSee all problems of the 2014 Ford Escape.\nThe contact owns a 2017 Ford Escape. While the vehicle was at a complete stop, a warning bell chimed and a \"shift to \"p\" restart engine manually\" message displayed intermittently. The contact was able to shift the vehicle into the park position and restart the engine manually. The vehicle was taken to the local dealer (battlefield Ford, 8820 centerville rd, manassas, va, 20110), but they were unable to duplicate the failure. The manufacturer was made aware of the failure and provided case number: cas 12755913. The manufacturer stated that they were aware of the failure and advised that once the vehicle was started, to turn the auto switch off. The manufacturer also advised the contact that she could get a second opinion because no further assistance would be offered. The failure mileage was approximately 10,000.\n\"takata recall\". . . . . . I stopped by 7-11 atm to get some money and other items. . . Upon returning to my vehicle I noticed it would not start. The dashboard said it was in reverse even though it was in park mode. I spend approximately 3. 5 hours on the phone with the Ford motor company trying to get some real help. After no success, I went thru three different customer service reps who were not knowledgeable on how to handle a vehicle that was disabled, stuck in reverse and would not start. I ended up calling aaa and had it towed to my own mechanic because I called three Ford dealership stated that it would be at least 2-3 weeks before someone could check out my vehicle. In addition, they were not cooperative in helping me get a rental car either and stated they would not cover the cost of renting a car. My own mechanic who has serviced all my vehicles and there has never been an issue. . . Advised me that the brake cable or something to that effect was broken. I just don't understand how that is possible since I just purchased the vehicle 10/2016. This is the second time in 9 months I've had issues with Ford and their faulty products. April 2017 Ford motors settled with me over my 2013 Ford focus which was in an out of the shop since March 2015. I've had to go thru numerous agencies to get any real help. I've spoken with my mechanic today and was given an approx estimate of $700 to repair and my car won't be available until next week. In addition, it's costing $170 to rent a car to get back and forth to school and work until Monday. I am looking for Ford to reimburse me for my expenses and cost to repair my vehicle. Or the other alternative is to buy back the vehicle. I will never purchase another vehicle from Ford again.\n|Problem Category||Number of Problems|\n|Power Train problems||\n|Automatic Transmission problems||\n|Automatic Transmission Control Module problems||\n|Transmission Fluid Leaking problems||\n|Transmission Failure problems||\n|Vehicle Shudder problems||\n|Automatic Transmission Torque Converter problems||\n|Transmission Gear Slipping problems||\n|Transmission Not Go Into Gear problems||\n|Transmission Noise problems||", "label": "Yes"}
+{"text": "Powerful UK Ltd 4X4 Parts & Accessories. PAIR of \"Black Edition\" Style. Range Rover Evoque 2011 -2016. This listing is for a PAIR of \"black edition\" style LED fog lights for the front bumper on a Range Rover Evoque. These lamps fit into the front bumper on all models of the Range Rover Evoque up to 2016.The PURE / PRESTIGE models have a different bumper from the DYNAMIC but all models use the same fog lights. These lights are not genuine Land Rover parts but can be used as an alternative to Land Rover PN LR043663 & LR043664. Also the fog light is the same regardless of if your car is a 3 or 5 door version. These can be used as a plug and play upgrade if you have the standard chrome fog lamps. Retro-fitting fog lamps to the Evoque Pure is not easy if they were not factory fitted - wiring work will need to be done and also upgrading the cars software. These fogs are not a genuine Land Rover item, this is an aftermarket version. To fit / change these fog lamps you will need to remove the front bumper - see below video. Which Vehicles will this fit?\nThis item will fit all Range Rover Evoque models (2011 -2015). These WILL NOT fit the newer Range Rover Evoque models (2015 on). POWERFUL UK Ltd Stock a full range of polished stainless steel trim accessories for the Range Rover Evoque & Range Rover L322 and Range Rover SPORT.Please ensure that you check all items carefully for damage / missing items before taking to a third party for fitting. Powerful UK Ltd shall have no liability for any additional fitting costs incurred by the customer in connection with fitting faulty parts. Please ensure that you check the fit of an item carefully before painting or modifying in any way. All fitting instructions and videos provided by Powerful UK Ltd are for advice and guidance only and should only be followed once an assessment has been made by the operator of the task, vehicle compatibility, impacts on safety etc.\nPowerful UK Ltd shall have no liability for any issues or damage caused when fitting our parts. Powerful UK Ltd will not be responsible for any errors or omissions or for the results obtained from the use of such information.\nTo the full extent allowed by applicable law, Powerful UK Ltd will not be liable to the user/or any third party for any consequential or incidental damages (including but not limited to loss of revenue, loss of profits, loss of anticipated savings, wasted expenditure, loss of privacy and loss of data) or any other indirect, special or punitive damages whatsoever that arise out of or are related to the use or fitting of any supplied parts. For full Terms and Conditions please see our website. We are a family run business based near Swindon in Wiltshire. We are a private limited company, incorporated in October 2001. We design and manufacture a range of 4x4 parts and accessories and supply to both the trade and public.We pride ourselves on offering excellent customer service and always welcome comments & feedback on our products. VAT REGISTERED - Full VAT invoice - if you need a company name on invoice - just ask. REGISTERED UK LTD COMPANY - Company registration number 4310157. International terms and conditions of sale. It is the responsibility of the customer to pay all charges of this nature. The item \"Black Edition Style Front Bumper Fog Lights lamp Range Rover Evoque Dynamic pure\" is in sale since Wednesday, October 4, 2017. This item is in the category \"Vehicle Parts & Accessories\\Car Parts\\External Lights & Indicators\\Fog Light Assemblies\". The seller is \"powerful_uk_ltd\" and is located in Swindon.\nThis item can be shipped worldwide.", "label": "Yes"}
+{"text": "Could this be the car to go where no Vauxhall Monaro VXR has always gone before his? Vauxhall Monaro VXR With 404 horsepower V8 from the Corvette LS2 6.0-liter will be supplied, the Monaro VXR new is set to be the first production Vauxhall to 180 mph top overtaking the Lotus Carlton finally to become the fastest ever Vauxhall.\nThe latest version of the flagship company performance for the original Monaro VXR, which sold within three months to go on sale this year. The new car is the VXR brand even further contribute to extremes, with more power and torque than any other production car on the Vauxhall badge.\nUnder the new ventilated bonnet sits the new great power of the LS2 6.0-liter V8, which recently debuted in the Corvette C6. How do you expect from a supercar engine, power figures are impressive, with 404 hp (up to 388 hp from the previous model) and a massive 391 pounds-ft of torque (compared to 376 lb-ft). Although the performance is still not officially registered, it is expected that the VXR can conveniently set on the record of 177 miles an hour the Lotus Carton in 1990. A time 00-60 of about 5.0 seconds is also predicted.\nBut the new version of the Vauxhall Monaro VXR has been built not only for direct speed. Together with the new engine, drive train, almost everything has a revised suspension and bigger brakes were updated to ensure that the latest version of the force to keep tamed to ride while still exciting. With its classic facade-engine, rear-drive layout, the Monaro has a reputation as a darling of the enthusiast drivers.\nSince those enthusiasts also loved the way the last VXR looked, the styling changes have been kept to a minimum. To help you breathe more efficient car and keep the engine cool, a distinctive pair of ventilation openings nostril was added to the top, and the four rear exhaust pipes makes now the tail. New 10-spoke alloy wheel size 19 “can the viewer to see the discs and calipers slotted VXR brand.\nVauxhall Monaro VXR Specification\nBrakes F/R: ABS, vented disc/vented disc\nTires F-R: n.a.\nDisplacement cu in (cc): 364 (5970)\nPower bhp (kW) at RPM: 404(301) / n.a.\nTorque lb-ft (Nm) at RPM: 391(530) / n.a.\nRedline at RPM: n.a.\nLength × Width × Height in: n.a.\nWeight lb (kg): n.a.\nAcceleration 0-62 mph s: 5.0 (est.)\nTop Speed mph (km/h): >180 (290) (est.)\nFuel Economy EPA city/highway mpg (l/100 km): n.a.\nBase For see the price, you can go the store(Any price and availability information displayed on Amazon at the time of purchase):: 2006 Vauxhall Monaro VXR – £36,995", "label": "Yes"}
+{"text": "Save your money and Buy a Honda!\nBy Scion TC on\nVehicle2008 Scion tC 2dr Hatchback (2.4L 4cyl 4A)\nReviewThis is the worst car I have ever purchased. I have already experienced auto window issues. When the weather is cold my trunk door will not stay open hitting me in the head and after only 2 years of owning it I have been left stranded and need to replace the battery. On a still newer car I do not expect to have any of these issues and have never experienced them on any previous cars I have owned. Yes this car is cheap and cheaply made! I will never buy another Toyota product.\nComments (0) Post a Comment\nYou must be signed in to post a comment.", "label": "Yes"}
+{"text": "Radio fuse Nissan Forum | Nissan Forums\nThe Nissan Versa Tech Discussion forum is the place to discuss Versa performance modifications and maintenance.How to view a fuse box diagram of a 2001 Honda Civic fuse ...\nHow can you view a fuse box diagram of a 2001 Honda Civic fuse box?Nissan Maxima Questions Trunk doesn't open with key fob ...\nI called a friend who is service technician at the local Nissan dealer, he told me to check the glove box, upper left side, you should see a switch that ...where is the ac fuse on the fuse control box... since ...\nwhere is the ac fuse on the fuse control box... since there are so many? B1676 Battery Pack Voltage Out Of Range\nRepair Information for B1676 code. Learn what does B1676 Battery Pack Voltage Out Of Range means?Nissan Altima\nThe Nissan Altima ˈ ɔː l t ɪ m ə is a mid size car which has been manufactured by Nissan since 1992. It is a continuation of the Nissan Bluebird line, which ...Nissan Frontier Parts and Accessories at NissanPartsDeal\nNissan Frontier Parts at NissanPartsDeal. Find the right Genuine OEM Frontier Parts from the full catalog we offer.Used Auto Parts Market\nQuality used auto parts instantly ... This Service uses Car Part Interchange By clicking on \"SEARCH\" you agree to Terms.Car Part Used Auto Parts Market\n200 Million used auto parts instantly searchable. Shop our large selection of parts based on brand, price, description, and location. Order the part with stock number ...It Still Runs\nJust because your car is old doesn’t mean it’s outdated. It Still Runs is your ultimate auto resource, whether you rotate your tires or change your oil.\nfuse box 1997 nissan maxima Gallery\n1998 nissan altima fuse box diagram\n2011 nissan altima s fuse box diagram 2011 free engine\n97 honda civic dx fuse box diagram\n1997 honda civic fuse box diagram pertaining to 97 civic\n94 nissan maxima audio wiring diagram\nhave a nissan maxima se 2000 fuse box have free engine\n350z trunk diagram 350z free engine image for user\n2009 chevy impala thermostat location\nnissan frontier starter location nissan get free image\nheadlight fuses toyota avensis\nnissan sentra fuel temperature sensor location\n2007 chevy impala thermostat location", "label": "Yes"}
+{"text": "The new BMW 2 Series Active Tourer marks BMW’s first departure from its usual rear-wheel-drive layout.\nAs well as front-wheel-drive, the 2 Series Active Tourer will use three-cylinder engines from the new Mini.\nMuch the same size (and shape, for that matter) as a Mercedes B-Class, the Active Tourer will initially be available with two engines: one petrol, and one diesel.\nThe 218i uses the three-cylinder petrol unit from the Mini, with 136hp and 220Nm of torque, enough to accelerate from 0-62mph in 9.3 seconds and on to 124mph. Combined cycle economy is expected to be around 57.6mpg with CO2 emissions of 115 g/km.\nThe diesel option arrives in the form of the four-cylinder 218d, its 150hp and 330Nm resulting in a quicker 0-62mph time of 8.9 seconds and a 127mph top speed. It’s more economical, too, recording 68.9mpg with emissions of 109 g/km.\nA more powerful 225i with xDrive four-wheel-drive will follow in November, as will a 220i, 216d, 220d and 220d xDrive.\nSix-speed manual transmissions are standard for all engines, with a six-speed auto option for the 218i and a new eight-speed auto option for the 218d.\nInterior flexibility is said to be a strong point, with a sliding rear back rest that allows a configurable amount of knee-room or luggage space, plus a 40:20:40 split offering a variety of loading options.\nBoot space is 468 litres, rising to 1,510 with the seats folded, with access to the cargo area by an automatic tailgate with the option of Smart Opening, triggered by waving your foot under the rear bumper.\nBMW say they’ve worked hard to ensure the new front-drive platform retains the brand’s engaging driving characteristics, with a new multi-link rear axle and the option of electronically controlled dampers.\nIn the UK, the Active Tourer will be offered in Sport, Luxury and M Sport models, with an optional aerodynamics package launching in November.\nThe new BMW 2 Series Active Tourer will arrive on these shores on 27th September 2014, with prices starting from less than £23,000.", "label": "Yes"}
+{"text": "Mazda Certifies Ultra-Low Emission Protégé\nFor immediate release\nSACRAMENTO – The California Environmental Protection Agency's Air Resources Board has certified the 1999 Mazda Protégé with 1.6-liter engine as an ultra-low emission vehicle (ULEV), making it one of the cleanest gasoline-powered automobiles sold in California.\n\"This is heartening news for California's ongoing campaign to improve air quality,\" said ARB Chairman John Dunlap. \"Cars with dramatically lower emissions like the Protégé will accelerate California's drive to cleaner air without sacrificing consumer expectations.\"\nDunlap noted that Southern California had 148 smog alerts in 1970 and only one in 1997. \"Much of the air-quality improvement over the past 30 years comes from the ARB's progressive efforts to reduce tailpipe emissions from automobiles,\" he said.\nEmissions from automobiles were reduced approximately 90 percent between 1966 and 1994. The Mazda Protégé emits about 70 percent less smog-forming pollutants than most of today's standard gasoline-powered passenger cars.\nThe Protégé is the second gasoline-powered automobile the ARB has certified as a ULEV, the first being the 1998 2.3-liter Honda Accord.\nARB maintains a Buyer's Guide to Cleaner Cars on its website (www.arb.ca.gov). To obtain a printed copy, call 1-800-END-SMOG.", "label": "Yes"}
+{"text": "Have Volkswagen Questions? Ask an Expert Now.\nHi im kevin have you checked the trunk loom in the hinge gap .you will see a rubber boot in gap by the trunk hinges if you pop it out on one end and check inside for any broken wires\nLet me know how you get on\nIm gonna opt out on this one i dont have enough info on your model another tech will help out shortly", "label": "Yes"}
+{"text": "General 660 Discussion\nFinally figured out what’s wrong with my raptor it was the boot for the spark plug.\nAlways check out your boot if your not getting spark . I’ve had a lot of problems with ordering parts. Someone showed me a video about how to check out the ohms between the plug and the spark plug wire.", "label": "Yes"}
+{"text": "A client from all the way in Blue Ridge Summit, PA came to us knowing he could get a great quality window tint job performed at our facility. He wanted UV protection for the interior of his Ford Taurus SHO, and also wanted to keep the car cooler inside. We installed Dark Matter window tint made by Geoshield. This film gives him the 99% UV protection he was looking for, and blocks about 75% more heat transfer than our entry level film. He was very pleased with this window tint job and will be back for stereo upgrades in the near future!\nThis site uses Akismet to reduce spam. Learn how your comment data is processed.", "label": "Yes"}
+{"text": "Foothill Transit has embraced change, and has the electric buses to prove it. Since 2010, the agency serving the San Gabriel and Pomona Valleys in the Greater LA region has added 30 zero-emission vehicles to its fleet, and its Executive Board set a goal to go “all-electric by 2030.”\nAccording to Doran Barnes, Foothill Transit’s Executive Director, the vehicles have proven reliable in service, traveling more than 1.3 million miles in the service area since 2010. The agency has a total of 373 buses, including 343 CNG, 16 “fast charge” and 14 “extended range” electric buses, and is responsible for 15 million passenger trips per year.\nFoothill Transit has been able to take full advantage of the State’s Hybrid and Zero-Emission Truck and Bus Program (HVIP), purchasing 15 of its 30 Proterra electric buses with HVIP vouchers funded with Cap-and-Trade dollars.\nBarnes points out that while riders care about getting from point A to point B, they also appreciate the public benefits of going electric. “It’s a matter of pride to the community and its leadership to have a high-profile project in the neighborhood that is also helping to clean the air.”\nIn a May 2016 press release announcing its goal to go all-electric in little more than a decade, the agency said its electric buses eliminate the same amount of emissions as 2,424 cars every year, and that since 2010, they have eliminated 2,616 tons of greenhouse gases and have helped the agency save 200,405 gallons of natural gas. “Most engines release harmful chemicals into the air like carbon monoxide, nitrogen dioxide, particulate matter and volatile organic compounds found to have a negative impact on public health, but Foothill Transit’s clean fleet – currently made up of Compressed Natural Gas (CNG) and electric buses – reduce the amount of pollutants released into the air. The impact will even be greater when the fleet is 100% electric.”\nProterra, which supplied the vehicles, has opened a West Coast vehicle manufacturing plant in the City of Industry, and has moved its corporate headquarters from Greenville, South Carolina to Burlingame, in large part to serve the rapidly growing e-bus market in California that is fueled by HVIP. While it retains its Greenville manufacturing facility for its east coast customers, it has added a battery system manufacturing plant to its Burlingame location.\nKent Leacock, Government Relations and Policy Director at Proterra, credits Barnes and his team for providing “invaluable input” as Proterra has evolved. “We were not long on transit experience when we started,” he says, adding that in large part “we are where we are today because of Foothill Transit.” Proterra currently has e-bus clients across the country, from Alaska to Hawaii to Texas and New England.\nSo the countdown to 2030 is on— only about 4,000 days to go!", "label": "Yes"}
+{"text": "Leather seats / moonroof / alloys / only 71k miles / tinted glass / radio controls on the steering wheel / blueooth capable! our dealership is honored to present a wonderful example of pure vehicle design... this 2011 Mercedes-Benz C-Class C 300 Luxury only has 71,185 miles on it and could potentially be the vehicle of your dreams! This low mileage Mercedes-Benz C-Class has barely been touched. It's the next best thing to buying new. The quintessential Mercedes-Benz - This Mercedes-Benz C-Class C 300 Luxury speaks volumes about its owner, about uncompromising individuality, a passion for driving and standards far above the ordinary. Based on the superb condition of this vehicle, along with the options and color, this Mercedes-Benz C-Class C 300 Luxury is sure to sell fast. More information about the 2011 Mercedes-Benz C-Class: The 2011 Mercedes-Benz C-Class models are the entry-level luxury cars for the brand. In particular, the Sport trims compete directly with the BMW 3-Series and INFINITI G35. Luxury trims come with a more traditional appearance, with a chrome grille and the Mercedes-Benz 3-pointed-star hood ornament. Sport trims feature a more-prominent grille-mounted Mercedes-Benz star and AMG body-styling. The Sport trims also feature deeper front and rear aprons, under-door rocker panels, 17-inch twin-spoke wheels, firmer suspension, 3-spoke steering wheels and titanium colored instrument panels. Each sport model also gets unique trim and wheels to fit. The 2011 C63 AMG still stands out as one of the fastest high-performance vehicles available in the United States. Alternatively, the entry-level C300 is a very affordable Mercedes-Benz, carrying an affordable base MSRP of $33,900. This model sets itself apart with strong safety feature list, Affordable luxury, a wide selection of performance engines, and available 4MATIC all wheel drive system\nPrice may exclude tax, title, tags, governmental fees, any emissions testing charges and any finance charges (if applicable). Unless otherwise stated separately in the vehicle details, price does not include documentation, processing, administrative, closing or similar fees. Current mileage may vary due to test drives and vehicle relocation.", "label": "Yes"}
+{"text": "Thanks!! You know what, after we had that discussion of not liking the back end of the car on the GranTurismo forum, after seeing the car from a side profile, it seduced me. Um..... I kinda like the back now....a lot. I think seeing it in a more \"basic color\" thats not a concept crazy looking color like above actually makes me fall more in love with it.Nicely done!\nI hope they don't commercialize that design too much with the production car -- the concept is dead sexy.\nThey can redo the rear though. I never liked it. Perhaps they got too much slack for going so ordinary with the Ghibli's hindquarters and said, 'oh yeah... well see what you think of THIS!'", "label": "Yes"}
+{"text": "Nyce1s.com - Stage 2 Auto Honda Day 2009 All Motor Champs!!!\nCongrats to Stage 2 Auto as they recently won the 2009 Englishtown Honda Day event!! Checkout http://www.nyce1s.com/forum/forumdisplay.php?f=12 for more videos!!\nNyce1s Grudge - 718 Turbo Civic VS Midnight Auto CF Civic @ E-Town!!\nHere is the recent race between 718/M&S Performance turbo Civic and Midnight Auto/AMR's turbo Civic!!!! Checkout http://www.mbracingnj.com for the performance parts that you need!!!! Checkout http://www.nyce1s.com/forum/forumdisplay.php?f=18 for more videos!!!!\nNyce1s.com - Wildrides @ Shakedown 2008!!!\nHere is a compilation of some of the best crashes, explosions, and wheelies from the 2008 Shakedown @ E-Town drag race event. Check us out at http://www.facebook.com/nyce1s !!! Checkout more race videos at http://www.nyce1s.com/forum !!! Checkout http://www.nrgtechracing.com for more information on one of the Northeast's premiere performance facilities!!\nNyce1s.com - World's Fastest Outlaw FWD Street Car - NRGTech Racing 8 Sec Civic!!!\nHere is NRG Tech Racing's Outlaw FWD Honda Civic. Check it out as they prep for the $10,000.00 Outlaw FWD Shootout on October 3rd & 4th, 2009! Checkout http://www.nyce1s.com/forum/forumdisplay.php?f=12 for more videos!!! Checkout http://www.nrgtechracing.com for one of the premiere tuning shops!!!", "label": "Yes"}
+{"text": "VOLVO S60 MODEL 2003 OWNERS MANUAL\nVolvo V70 - Wikipedia\nFor model year 2003 the crossover was renamed to XC70. The sedan model was called Volvo S60. The third generation (2007–2016) debuted in February 2007. It was based on the P3 platform and marketed as the V70 and the XC70. Production of the V70 ended on 25 April 2016, the XC70 continued until 13 May 2016. The sedan model was called Volvo S80\nHow To Find Your Car Owner's Manual Online on Edmunds\nOct 18, 2013Volvo S60 Silverado 1500 Car Appraiser Tool Honda CR-V Lease Deals. 2003-2011 (No login needed.) or you're after the manual for\n2008 Volvo XC90 Review & Ratings | Edmunds\nIn response, Volvo introduced its flagship XC90 crossover SUV in 2003. The XC90 turned out to be a hit for the brand, and in fact has been Volvo's best-selling model the past two years.", "label": "Yes"}
+{"text": "2020 Chevrolet Captiva SUV Release Date, Price, & Changes – It had been Chevrolet who launched the original SUV with the Suburban back in 1935 – Captiva is the most recent model in a long line of genuine Chevrolet SUVs. It debuts at the Geneva Motor Show (March 2 – 12, 2006) and will probably be available in showrooms across Europe starting in June.\n2020 Chevrolet Captiva SUV Review\nCaptiva is the first Chevrolet in Europe to be equipped with a diesel engine. The initial version of a new family designed as a joints system between GMDAT and GM Powertrain, the engine is also built in an all-new factory. Along with 2.4 liter and 3.2-liter V6 gasoline engines, Captiva comes with the new 2.0 liter, a four-cylinder 150hp variant of the new diesel with typical rail shot supplying high ranges of efficiency and refinement. The Captiva can also be the first model in Chevrolet’s European range available with the electronic stability program (ESP).\nCaptiva’s expressive design can be described as “strong, stylish and sporty”. It is a huge, useful and tough vehicle designed with an optimum on-road ride and handling attributes but remarkably capable in challenging conditions and road situations. Buyers will have the option involving front-wheel and all-wheel-drive variants, the second option featuring an active at will all-wheel-drive system. As driving circumstances influence, the rear axle is quickly utilized via an electronically controlled electromagnetic coupling to give the highest traction. The system also easily interacts with the ESP and ABS methods, enhancing driver control of the vehicle and safety margins. The ESP on its own has further capabilities like HBA (Hydraulic Brake Assist), HDC (Hill Descent Control), ARP (Active-Rollover Safety), FBS (Fading Brake Help) and TSA (Trailer Stabilization Assist). Notably, development of the European ride and coping with dynamics continues to be carried out with Millbrook, GM’s confirming floor in the UK. Along with durability testing, it has guaranteed that the attributes of Captiva’s on-road behavior go with client needs across Europe.\nIts streamlined nevertheless daring design is accentuated by powerful wheel arches and a sweeping feature line that runs from the front fender vent through to the tail lighting fixtures. A grey sill finishes off goes all around the vehicle, reducing its noticeable elevation and is disrupted by contrasting ‘undertray’ features on the front and rear bumpers. Design style also features in the cylindrical prism type headlamps, LED type transform signal lamps, transform transmission repeaters in the door wall mirrors and flush appropriate, pull-out type door deals with. The wide tailgate with its built-in opening window underlines the practical side of the Captiva. Inside it is roomy, with seating for five and optionally available seating for seven passengers. It measures 4,635/1,850/1,720 mm (length/width/height) and appears on a wheelbase of 2,705 mm. In five passenger setup, it gives you a trunk volume of 405 liters (VDA method). All seats, such as the front passenger seat, might be folded away forward and down, reaching a flat area. Restating a Chevrolet hallmark, it provides a great deal of storing space, including a wide internet below the musical instrument panel.\nThe instrument panel on its own is split up from the center console, which makes it easy to walk via to the other side. Style and function characterize the interior design, with high-class supplies and an outstanding level of fit and finish. The musical instrument cluster features easy to read semi-round dials highlighted by aluminum style rims. The elegant, fully integrated and flush fit infotainment unit in the midst unit aspires to provide best in class entertainment. Its features include an eight-way speaker system, an amplifier by having an output of 4 x 45 watts, an in-dash six-CD changer with MP3 capacity. Full incorporation of the audio system also helps security. The unit residences the driver info system delivering data which include Electronic Climate control, outside heat, compass, average fuel intake, and vehicle speed, and range for staying fuel. The complete safety equipment includes dual front airbags roof side and curtain airbags, knee bolsters and safety belt pretensioners and weight limiters for the front passenger.\nIn the beginning, three transversally installed engines will probably be available for the Captiva. They include the brand new, state-of-the-artwork GM frequent rail diesel engine collectively developed between GMDAT and GM Powertrain. In its first application, the 16 valve unit gives 110 kW (150 hp) at 4,000 rpm and maximum torque of 320 Nm at 2,000 rpm. The mixed fuel ingestion is 7.6 l per 100 km. It is the first software of a family of diesel powertrains that may come to be available in other Chevrolet items in Europe, later on, this year. The gasoline engine is a 2.4 liter in-line DOHC four-cylinder, giving 100 kW (133 hp) at 5,000 rpm and a torque greatest of 220 Nm at 2,200 rpm. Its average fuel consumption is 9.9 l per 100 km. The top-of-the-line 3.2-liter V6 engine (not available in all places) generates 169 kW (225 hp) at 6,600 rpm, maximum torque is 297 Nm at 3,200 rpm. Its combined fuel ingestion is 11.7 l per 100 km. Suspension structure is comprised of McPherson strut settings in front and an unbiased four weblink design in the rear. Ventilated disc brakes are standard on all four wheels. Four-cylinder versions can come standard with 215/70 R 16 tires on 6.5J x 16-inch wheels, although the V6 rolls on 235/60 R 17 tires on 7.0J x 17-inch wheels. 235/55 R 18 are available.", "label": "Yes"}
+{"text": "BEST BANG FOR YOUR BUCK EARLY 2ND GEN, 350 V8, FACTORY AIR CAR, READY TO CRUISE\nNot everyone has a big bank account to finance their car hobby, and if you've been looking through all the junk to find a jewel that you can actually afford, please take a look at this 1970 Chevy Camaro. It's a tidy car with a few upgrades and no stories, all available at an attractive price. With a canvas like this, you can build the car of your dreams without breaking the bank.\nWe don't have a lot of history on this car, as it came from an auction not too long ago, but there's little doubt that it has good bones. The paint is a few years old and with a recent buff, it shines up quite nicely. White actually looks pretty sharp on the second-generation F-body, and this car wears it well. It also wears Z/28 badges, but there's no confirmation as to whether it's a real Z, but it certainly has the right look with both chin and ducktail spoilers. No stripes, no aftermarket hood, and that only seems to emphasize just how clean this car really is. Panel fit is decent and a hobbyist with a little time could easily pump it up a notch and really add some value. The chrome is probably original, so it's showing its age, but then again, it all looks uniform, so I don't know that I'd worry about replacing it. I kind of dig the black side mirrors, and it's easy to imagine a few other black accents on this car to really make it pop, again something that could be done inexpensively to pay big dividends.\nThe black interior looks pretty darned good and has obviously been freshened in the not-too-distant past. The driver's seat may show some very minor signs of use, but things like the headliner, door panels, and carpet appear to be in excellent shape. It's certainly nicely outfitted, including factory A/C and a Blaupunkt AM/FM/CD stereo, and the gauges offer a fairly comprehensive view of the engine bay. The steering wheel needs an emblem, obviously, but those are easy to find on eBay (or put in a cooler wheel), and someone has thoughtfully added an air/fuel gauge on the center console, so tuning is easy.. The rear seat area looks almost entirely unused and there are rubber floor mats to help keep it looking good for years to come. And a single glance in the trunk will reveal that this isn't some rust bucket, and it even includes a full-sized spare!\nThe warmed-over 350 cubic inch V8 is a great runner, as they usually are. Someone's added an Edelbrock intake and 4-barrel carburetor, as well as a matching chrome air cleaner. It starts easily and runs really well, so sorting out the mechanicals isn't going to be a top priority when you get this car home. It has Chevy Orange paint for a fairly factory look and the requisite long-tube headers and a brand new Flowmaster exhaust system give it an awesome sound. The TH350 3-speed automatic transmission is quick with a downshift when you nail it and that appears to be the original 10-bolt rear end hanging out back. The only major modification are those shiny 17-inch REV wheels, which spin 235/45/17 front and 245/45/17 rear performance radials.\nIn terms of bang for the buck, this Camaro totally rocks. Take it home, start having fun immediately, and upgrade it along the way. Call now!\n- Air Conditioning\n- AM/FM Radio\n- CD Player\n- Front Disc Brakes\n- Power Brakes\n- Power Steering\n- Seatbelts (Front)\n- Seatbelts (Rear)\n- Vinyl Interior\nYou May Also Be Interested In...\nWhy Consign with\nBecause we make it easy for you to get more money in your pocket. Here are even more reasons to choose us…Learn More", "label": "Yes"}
+{"text": "Finally, Ferrari has decided to show its green side. The automaker unveiled its first hybrid at the Geneva Motor Show, the 599 HY-KERS. It’s taken Ferrari long enough to make its way to the green car arena, but with the likes of Porsche, Lotus and Audi going the green way, it was only a matter of time before the prancing horse gave its sportscars the environmental makeover.\nFerrari says that the new hybrid is an experimental vehicle, but it will help bring the company’s latest racing technology to the roads, and do that with an eye for the environment. Quite appropriately, the new hybrid makes use of the Kinetic Energy Recovery System (KERS), which is used in F1 racing.\nThe hybrid is based on 599 GTV Fioriano, and has a V12 engine working with an electric motor. This 100hp electric motor could either be used for small trips in the car, or to give it some extra boost of power. It may not be that efficient, but the system is able to increase the car’s fuel efficiency by 50%; taking it from 9mpg to a whopping 14mpg! Well, good for a start.", "label": "Yes"}
+{"text": "1968 Chevrolet C10 SWB\nOur Price $20,995\n*This calculator is for informational use only and is based on the information you provide. Actual loan amounts and payments will vary based on additional items such as taxes and fees as well as the actual interest rate available to you from a financial institution.\n- TAN Leather\n- 350 CID SBC V8\n- Rear wheel drive\n- AS-IS Extended Available\nAdditional pictures are posted on I-95 Muscle's direct website.\nThe perfect patina C10 does exist! This lowered beauty of a 1968 C10 has had its gold paint perfectly eroded over the years creating one of the best patina appearances we've seen yet. The chrome 20 inch wheels provide a nice contrast and the old look sails smooth with a 350 CID V8 and Turbo 350 transmission pushing it down the street. It starts with ease and stays running after that. A Vintage air conditioning system has been installed to keep you nice and cool while cruising. A new firewall, cab corners, a one-piece floor, and rockers were installed during the build ensuring the truck is solid from top to bottom. New upholstery and carpet cleaned up the interior along with a new FM radio that looks like the factory one. The wiring harness was also replaced so you don't have to worry about tracking down those electrical minions that pop up with most classic cars. Financing is easy and trades are welcome, so let's get you in this snazzy C10 today!\nDisplayed pricing excludes I-95 Muscle's $499 Dealer fee as well as any DMV, tax, and licence plate fees associated with registering the vehicle in the purchaser's state.\nIt is the customer's sole responsibility to verify the existence and condition of any equipment listed. Neither the dealership nor AutoRevo is responsible for misprints on prices or equipment. It is the customer's sole responsibility to verify the accuracy of the prices with the dealer. Pricing subject to change without notice.", "label": "Yes"}
+{"text": "2017 BMW Alpina B7 xDrive In addition to those goodies, add in the all-wheel drive ... Alpina as just a tuner, since its models are based so heavily on BMW models. It is important to remember that it is considered a manufacturer by the German Mini stry of Transport, though. 02/8/2016 - 9:30 am | View Link\nPower, Dynamics and Luxury combined for class-leading performance and a superior driving experience – the all-new 2017 BMW ALPINA B7 xDrive. Inside the engine special Mahle pistons and NGK spark plugs are designed to deal with the temperatures and loads associated with 20 psi of boost pressure and a compression ... ALPINA details add exclusivity and individual style to the interior. 02/8/2016 - 8:28 am | View Link\nBMW To Add Another Plug-In Hybrid? If So, Not For U.S. Sale Not to be confused with the rear-wheel drive 2 Series coupe and convertible sold in the U.S., the Active Tourer uses the same UKL platform as the current-generation MINI models ... Water Injection Can Boost Power And Cut Fuel Consumption BMW did not ... 07/8/2015 - 12:30 am | View Link\nBMW Just Released The Most Extreme MINI Of All Time The new MINI John Cooper Works Edition is the latest in the line of high performance models to carry ... re-tuned suspension to boost handling capability around the twisty bits of the road. A new sports exhaust will surely add to the auditory pleasures ... 12/12/2014 - 12:57 pm | View Link\nAudi's aim to top BMW at risk without new technology drive Spending on r&d by the 81-year-old brand, VW Group's profit engine, last year was far below the amount spent by both BMW and Mercedes-Benz owner ... more distinctive face for high-end models and sportier vehicles, boost lightweight construction and plug ... 11/19/2013 - 9:11 am | View Link\n2014 BMW 6 Series M Sport family to start from $80,625* This package will allow standard 6 Series models to receive M6 styling cues like the more ... coupled with other high-grade applications that add a further boost to driving pleasure and convenience, as well as enhancing the exclusive ambience of the ... 05/16/2013 - 1:00 pm | View Link\nHow BMW's Mini Trumped Daimler's Smart Car Mini, which is based in Oxford, England, will add a roadster and a coupe-like crossover this year, taking its lineup to seven models. It’s also expanding ... Smart also expects a boost as Daimler’s Car2go car-sharing business expands. 02/2/2012 - 10:38 am | View Link\nMINI Australia MINI Australia's full range of cars, SUV's and commercials with prices, specials, specs, latest news and expert reviews. Compare cars, and find the best deals on your ... 02/12/2016 - 2:46 pm | View Website\nBMW Superchargers, BMW Supercharger Kits KO Performance is the most comprehensive source online or off for BMW superchargers. We offer the largest ... 02/11/2016 - 1:49 pm | View Website\nBMW i8 Price, Photos, and Specs Check out the BMW i8 review at CARandDRIVER.com. Use our Car Buying Guide to research BMW i8 prices, specs, photos, videos, and more. 02/11/2016 - 9:17 am | View Website\nOBDII CAN Flap Module for F Series BMW OBDII CAN Module for F Series Reg $299.00 Intro Price $279.00 Worldwide Shipping Available. Estimate Shipping by adding to cart and entering in your ZIP code or country. 02/11/2016 - 3:48 am | View Website\nBMW E46 Shark Injector Performance Software, 1996-2005 ... This software is a major refinement of the stock software. It makes the car much easier to drive with less hesitation, more torque, and incredibly smooth operation. 02/10/2016 - 9:14 pm | View Website\nBMW Check Engine Service Light Reset, Mini Code Reset Tool ... Applications: All 2006+ BMW models are supported including E & F chassis. Also supports all MINI Cooper models. Languages Supported: English, Spanish, French, German ... 02/10/2016 - 2:05 pm | View Website\nBMW Gauge Kits and Data Acquisition | Turner Motorsport This all-in-one gauge is the perfect option for track enthusiasts, performance tuned cars or for those just wanting to add some flair and functionality to the BMW's ... 02/10/2016 - 5:30 am | View Website\nREUTERS/Jonathan ErnstDonald Trump went after Sen. Ted Cruz (R-Texas) late in Saturday night's CBS Republican debate while arguing about Trump's more liberal past.\nCruz said Trump was \"very liberal\" on social issues, causing Trump to fire back that Cruz was the \"single biggest liar.\"\nIt was perhaps the highlight of a fiery presidential debate in which the GOP candidates repeatedly attacked each other on stage.\nTrump unloaded on former Florida Gov.\nReuters/ Kai PfaffenbachThere's one hedge fund strategy that's emerged as the big winner in 2016, and it's driven by computers.\nIt has been absolutely brutal for hedge funds in general. Many are already suffering double-digit losses as global equities got slammed and oil prices plunged in January.\nThe average hedge fund is now down about 4.4% this year, according to data from Hedge Fund Research.\nOhio Gov. John Kasich sought to stay above the fray Saturday night at yet another GOP primary debate, avoiding ugly and heated fighting and yelling from his fellow Republican presidential contenders.\nOver the course of the debate, GOP front-runner Donald Trump fought with both Jeb Bush and Ted Cruz. Cruz also got into an argument with fellow Sen.\nAs an alternative to the standard, incomprehensible forty page definition of net profits proffered by the studios, I offer the short-form definition set out below, which does the job just as nicely and has stood the test of time. My only concession to the industry practice of obfuscation is to", "label": "Yes"}
+{"text": "Wherever your trip takes you, book the perfect car, conveniently and affordably.\nGet your car delivered to you, saving time and hassle\nThe perfect car\nChoose the exact car you want — from swishy sports cars to sturdy sedans\nMore bang for your buck\nBook a better car for up to 35% less than traditional car rental agencies\nAverage ratings near Burnaby, BC\nZoya was a fantastic host - friendly and accommodating. Vehicle was very clean and stocked with Sabrina toon essentials. The Sante Fe ran great, no issues whatsoever - will book again next time I’m in need of a rental.\nZoya is a wonderful host. The car was completely clean when we use it at the beginning our trip. She is very attentive and kind. We'll repite with her and her car!\nThis SUV is really smooth to drive. Good take for a family of 5 and some luggages. Price is also good compared to the other SUVs of same kind.\nA very kind, punctual and flexible person with the times. The car in perfect condition and very clean.\nThis was an amazing experience by an amazing host. I had a great time renting Eddie's mazda. He was very informative and helpful. And he always responded fast. And not to mention . The car is so cool and amazing. Never thought mazda would make a car that drove and looked this good. Overall 10/10 experience with eddy.\nNo complaints, car drove well, was cleaned sufficiently and Kelso was courteous enough to accept an earlier end time than initially scheduled.\nAwesome guy, No issues at all. He was punctual and very flexible. Car is great for road trips and camping trips. Would rent again!\nEddy was a perfect host, c’est un bon chum ! The car is more than suitable and everything went perfectly ! Best rent ever !\nKyle was super accommodating. He worked with me and made my whole trip very convenient. I highly recommend him and I will rent again. Thanks again Kyle! ⭐️⭐️⭐️⭐️⭐️\nKelso is very accommodating. The car is in excellent condition. I would definitely rent it again!\nEasily the best car I've ever driven, and the car owner, Eddy, is really friendly. Highly recommended.\nGreat ride, great host. Only complaint was he said not to worry about cleaning the vehicle on return, and ended up charging for cleaning. Other than that, easy pick up easy to deal with.\nFredrik was an excellent host by being flexible and understanding. He offered clear communication throughout the entire trip.\nAmazing host, so cheerful and positive. We had plans change and he was very accommodating! Using again next time for sure.\nKelso is a great host, very knowledgeable about his vehicle, professional, I would most definitely recommend him to friends & family.\nEddy is a great host. I was trying to look for a car near my house and Eddy's car is awesome. The car was perfectly clean and sanitized before we got it. The tank was full so we were \"get-set-go\" the moment we got the car. Thanks for everything Eddy :)\nThat was my first time renting a car using Turo and the experience with Kelso and his car couldn't have been better. Pick up was easy, his car was very clean and ready to use.\nEddy’s car was perfect for my trip up North! The car came very clean when I got it. I had a very comfortable ride with Eddy’s CX-9. The features in this car was nice! Heated and cooled seats, lots of leg room, overall the car was very spacious. Eddy’s response time was quick and efficient! I enjoyed the car and I would definitely book this car again. Thank you Eddy!\nNiyoto was very helpful with flexible pick-up and drop-off times, and the car was great! Definitely would book with Niyoto again.\nKelso was communicative, friendly and accommodating; the car is in brand new condition, very safe on the winter roads with AWD and winter tires, felt luxurious and sporty. 100% recommended, a real pleasure !\nGreat owner, with a vehicle that is in perfect condition. I would highly recommend!\nI would highly recommend to book this car. It was really smooth to drive and we had no problems. Also, the owners were so amazing!\nI booked the wrong day by mistake but last minute changed it and they were so accommodating! Would recommend!", "label": "Yes"}
+{"text": "As part of the new generation of efficient people-operated operators, the Traveler has a file 2.0 liter turbodiesel with the Eight-speed automatic transition. While 150 hp Doesn’t sound like much for a big guy, the torque is where it’s at 340Nm of torsion at only 2,000 rpm. Coupled with several gears, acceleration is smooth and brisk. In NLEX and SCTEX, the ride is so quiet and stable, that you’ll appreciate heads the show To remind you that you have already exceeded the speed limit.\nKeep your foot light on the gas pedal and you’ll get rewards all around 12.5 km/l. Who does not want to skimp on expensive diesel fuel these days? While the “transmission” is a space-saving turntable on the dashboard, you can still get paddle shifters. I never felt the need to use them since our drives were mostly straight roads, but these should be useful for roundabouts.\nBy the way, he still has a file Conventional parking brake As God intended, not other unnecessarily complex electronic brakes. So if you’ve ever needed to make a quick J-turn, you’ve got one thing.\nOddly, for a luxury van that comes with so many standard safety tech as ubiquitous airbags, predictable traction control and hill stability, and convenience features like USB sockets and foldable trays, it lacks automatic tailgate. Or maybe the French don’t want you to be too lazy, and a little exercise is good for your heart. It also has front and rear parking sensors and a rear camera, but the front camera would be great because the sensor doesn’t always warn you about bad wheel stops that can damage the bumper.\nprice P3,099,000 For eight seats, the Traveler Premium delivers European-quality ride and comfort in a large, non-ostentatious package that will watch you roam the countryside for miles.", "label": "Yes"}
+{"text": "Woah, there’s a new Honda Civic Type R for Super GT racing in Japan\nAero nerds unite! The bonkers Civic Type R-GT will begin testing this week\nThank you for subscribing to our newsletter. Look out for your regular round-up of news, reviews and offers in your inbox.\nGet all the latest news, reviews and exclusives, direct to your inbox.", "label": "Yes"}
+{"text": "I just put a new carb on my 1977 batavus hs50 . mstarts and idles fine nut when I open the throttle it dies. am I not getting enough compression?\nopen throttle then dies...help\n|Mike Gonzales||09/18/19 03:06PM|\n|Don Ohio||09/18/19 03:59PM|\n|Born to be WillD||09/18/19 07:15PM|\n|Mike Gonzales||09/18/19 09:40PM|\n|Don Ohio||09/18/19 11:12PM|\nWant to post in this forum? We'd love to have you join the discussion, but first:", "label": "Yes"}
+{"text": "As a ride-hailing driver, choosing the right car is essential to your business. You want a car that is reliable, fuel-efficient, comfortable, and affordable.\nOne car that has been gaining popularity among Uber drivers is the Hyundai Elantra. But is it a good car for Uber?\nAccording to various online forums and reviews, the Hyundai Elantra is a great car for Uber and other ride-hailing services.\nThe Elantra is a compact sedan that offers a comfortable ride, good fuel economy, and a spacious interior. It has a reputation for being reliable, which is crucial for ride-hailing drivers who rely on their cars to make a living.\nFurthermore, the Elantra has a good safety rating and comes with several advanced safety features, such as lane departure warning, forward collision warning, and automatic emergency braking.\nThese features can help prevent accidents and keep you and your passengers safe on the road. But let’s take a closer look at why the Hyundai Elantra is a good car for Uber drivers.\nHyundai Elantra Overview\nThe Hyundai Elantra is a popular compact sedan that has been a favorite among Uber drivers for its reliability, fuel efficiency, and affordability. It has a sleek design and advanced safety features that make it a great option for both drivers and passengers.\nThe Elantra comes with a 2.0-liter four-cylinder engine that produces 147 horsepower and 132 lb-ft of torque.\nIt has a six-speed automatic transmission and front-wheel drive. The fuel economy is impressive, with an EPA-estimated 31 mpg in the city and 41 mpg on the highway, making it an excellent choice for Uber drivers who want to save money on gas.\nThe cabin is spacious and comfortable, with plenty of legroom and headroom for both drivers and passengers. The seats are supportive and offer good visibility, and the infotainment system is easy to use and comes with standard features like Apple CarPlay and Android Auto.\nThe Elantra also has a range of safety features, including forward collision warning, automatic emergency braking, lane departure warning, and lane keep assist.\nThese features help to keep drivers and passengers safe on the road and make the Elantra a reliable choice for Uber drivers.\nHyundai Elantra for Uber\nIf you are considering buying a new car for Uber, the Hyundai Elantra is a great option. It is a reliable car that offers good fuel efficiency, comfort, and space.\nIn this section, we will discuss the cost of ownership, fuel efficiency, comfort and space, reliability, and maintenance of the Hyundai Elantra.\nCost of Ownership\nThe cost of ownership of the Hyundai Elantra is relatively low compared to other cars in its class. It has a starting price of around $20,000, which is affordable for most Uber drivers.\nThe maintenance cost of the Elantra is also low, which makes it an ideal car for Uber drivers who want to save money on maintenance and repairs.\nThe Hyundai Elantra is known for its excellent fuel efficiency. It has an EPA-estimated fuel economy rating of up to 41 mpg on the highway, which means you can save a lot of money on gas. This makes it an ideal car for Uber drivers who want to save money on fuel costs.\nComfort and Space\nThe Hyundai Elantra is a comfortable car with plenty of space for passengers and luggage. It has a spacious interior that can comfortably seat up to five passengers.\nThe seats are comfortable, and there is plenty of legroom and headroom for taller passengers. The trunk is also spacious, which makes it easy to carry luggage and other items.\nReliability and Maintenance\nThe Hyundai Elantra is a reliable car that requires minimal maintenance. It has a reputation for being a dependable car that can last for many years with proper maintenance. The Elantra comes with a 5-year/60,000-mile limited warranty and a 10-year/100,000-mile powertrain warranty, which gives you peace of mind knowing that your car is covered in case of any issues.\nOverall, the Hyundai Elantra is a great car for Uber drivers. It is affordable, fuel-efficient, comfortable, and reliable. If you are in the market for a new car for Uber, the Hyundai Elantra is definitely worth considering.\nHyundai Elantra vs Competitors\nWhen it comes to ride-sharing vehicles, there are many options available. However, the Hyundai Elantra stands out as a reliable and cost-effective choice. Let’s take a closer look at how Elantra compares to some of its competitors.\nThe Toyota Corolla is a popular choice among ride-sharing drivers due to its fuel efficiency and reliability.\nHowever, the Elantra offers a more spacious interior and a more modern design. Additionally, the Elantra has a lower starting price than the Corolla, making it a more affordable option for drivers on a budget.\nThe Honda Civic is another popular choice among ride-sharing drivers. While the Civic offers a sportier driving experience and a higher resale value, the Elantra offers a more spacious interior and a longer warranty.\nAdditionally, the Elantra has a lower starting price than the Civic, making it a more cost-effective option.\nThe Kia Forte is a newer entrant in the ride-sharing market, but it offers many of the same features as the Elantra. However, the Elantra has a more refined interior and a longer warranty. Additionally, the Elantra has a lower starting price than the Forte, making it a more affordable option for drivers.\nOverall, while the Elantra may not be the flashiest or most high-end option on the market, it offers a solid combination of reliability, affordability, and comfort that make it an excellent choice for ride-sharing drivers.\nAlso, check Is Peugeot 307 Good for Uber?\nAfter conducting research on the Hyundai Elantra, it is clear that this vehicle is a great option for Uber drivers. With its impressive gas mileage, comfortable interior, and affordable price, the Elantra is a practical and reliable choice for those looking to earn money through ride-sharing.\nAdditionally, the Elantra has been recommended by several reputable sources as one of the best cars for Uber and Lyft drivers. Its combination of style, safety, and efficiency make it an attractive option for both drivers and passengers alike.\nOf course, every driver’s needs and preferences are different, and it is important to consider factors such as personal budget, location, and driving habits when choosing a vehicle for ride-sharing.\nHowever, based on the information available, it seems that the Hyundai Elantra is a solid choice for those looking to join the gig economy as a driver.", "label": "Yes"}
+{"text": "Used Subaru Impreza for Sale\n2.0L 4-Cylinder SMPI DOHC 16V. AWD! Rally Race Inspired!Want to save some money? Get the NEW look for the used price on this one owner vehicle. Previous owner purchased it brand new! This Subaru Impreza has a great cockpit layout, with all the controls easy to find and right where you need them.It's so easy at Honda of Greeley! All used car prices include dealer and handling charge of $498.\nList price: $17,382\nAll Wheel Drive,CRYSTAL WHITE PEARL,IVORY; CLOTH UPHOLSTERY,STANDARD MODELThis vehicle includes a Money-Back Guarantee* and passed our precise inspection process. Best of all the price you see is the price you pay. No haggling. No back and forth. No pressure. And this price is so good it is guaranteed. Thank you for visiting another one of AutoNation Mazda Roseville's exclusive listings! This 2016 Subaru Impreza Sedan is offered to you for sale by AutoNation Mazda Roseville. AutoNation Mazda Roseville is honored to present a most breathtaking example of pure vehicle design decadence...this is the vehicle of dreams! The body of this vehicle is straight and the paint is in excellent condition, with absolutely no signs of prior damage or reconditioning. This vehicle has all of the right options. This vehicle was tastefully optioned. With just 15,405 miles, this car is barely broken in. Very low mileage vehicle. Please see attached CARFAX report. This car has successfully undergone a rigorous pre-buy inspection. An after-market warranty is available for purchase on this vehicle. Ask me about how to get an extended warranty on this vehicle. *Money-Back Guarantee is valid for 5 days or 250 miles, whichever comes first. Subject to certain terms and conditions. See store for details. Some restrictions apply.\nList price: $17,996\nAll Wheel Drive,BLACK; SPORT FABRIC UPHOLSTERY,QUARTZ BLUE PEARL,STANDARD MODELThis vehicle includes a Money-Back Guarantee* and passed our precise inspection process. Best of all the price you see is the price you pay. No haggling. No back and forth. No pressure. And this price is so good it is guaranteed. Contact Mercedes-Benz of Stevens Creek today for information on dozens of vehicles like this 2015 Subaru Impreza Wagon 2.0i Sport Premium. Only the CARFAX Buyback Guarantee can offer you the comfort of knowing you made the right purchase. This is a well kept ONE-OWNER Subaru Impreza Wagon 2.0i Sport Premium with a full CARFAX history report. The less money you spend at the pump, the more money you'll have to spend on you. So why not consider this wonderfully styled, fuel-efficient Subaru Impreza Wagon. This Subaru Impreza Wagon features AWD. That means power and control delivered to all four wheels for maximum grip and improved handling. All records are included with the purchase of this well-maintained pre-owned vehicle. This Subaru Impreza Wagon is beautiful and the interior is clean with virtually no flaws. Most vehicles are forgettable, but then there is the 2015 Subaru Impreza Wagon 2.0i Sport Premium. This high-performance vehicle provides a memorable experience each time you drive it. The engineers at Subaru, without question, designed a masterful automobile that provides all of the essential perks needed for someone like you. This is your chance to own the very rare Subaru Impreza Wagon. More information about the 2015 Subaru Impreza Wagon: The Subaru Impreza is a compact sedan or hatchback that stands as a very strong value, offering standard all-wheel drive in models that are priced competitively with others' front-wheel-drive models. The Impreza is also the most fuel-efficient all-wheel-drive car available in America and offers confident handling, in part because of that drivetrain. The Impreza is a Top Safety Pick by the IIHS. Strengths of this model include excellent gas mileage, Standard all-wheel drive included, responsive handling, space-efficient layout, and fresh, stylish exterior *Money-Back Guarantee is valid for 5 days or 250 miles, whichever comes first. Subject to certain terms and conditions. See store for details. Some restrictions apply.\n**ALL WHEEL DRIVE**, **MOONROOF/SUNROOF**, **REAR VIEW CAMERA**, **BLIND SPOT MONITORING**, **FORWARD COLLISION WARNING**, **LANE DEPARTURE WARNING**, **BALANCE OF FACTORY WARRANTY**, **1 OWNER CLEAN CARFAX**, **BLUETOOTH & USB**, **ORIGINAL MSRP $28,817**, Blind Spot Detection, EyeSight System, High Beam Assist, Moonroof/BSD & RCTA/Eyesight, Power Moonroof, Rear Cross Traffic Alert, Reverse Automatic Braking System (RAB). CARFAX One-Owner. Clean CARFAX. Odometer is 5639 miles below market average! Plus, the Bill Jacobs Auto Family has grown into one of the most respected businesses in the Chicagoland Area. We feature one of the largest selections of Certified MINIs and Pre-Owned vehicles in the Midwest. We boast a BRAND NEW STATE-OF-THE-ART FACILITY with unparalleled accommodations, developed to be one of Illinois' most environmentally advanced dealerships according to LEED guidelines. Here at Bill Jacobs MINI we offer complimentary MINI Courtesy/Demo vehicles while you service your vehicle, and our car wash is open and available to you six days a week. If you are looking to purchase from out of state, we are less than 30 minutes from either Chicago airport. Please check us out online @ www.billjacobsmini.com.\nExpires Nov 30, 2017.\nCrystal White Pearl exterior and Black interior, 2.0i trim. FUEL EFFICIENT 37 MPG Hwy/28 MPG City! Clean, CARFAX 1-Owner, Subaru Certified. iPod/MP3 Input, Bluetooth, CD Player, STANDARD MODEL, All Wheel Drive, Back-Up Camera. AND MORE!KEY FEATURES INCLUDE: All Wheel Drive, Back-Up Camera, iPod/MP3 Input, Bluetooth, CD Player. Rear Spoiler, MP3 Player, Keyless Entry, Child Safety Locks, Steering Wheel Controls.OPTION PACKAGES: STANDARD MODEL. Subaru 2.0i with Crystal White Pearl exterior and Black interior features a 4 Cylinder Engine with 148 HP at 6200 RPM*. Non-Smoker vehicle, This Vehicle has gone through a 120 point service inspection.VEHICLE REVIEWS: Its cabin is spacious, with a rear seat that's among the roomiest in the segment. The Impreza also has a well-tuned suspension that nicely buffers passengers from jolts and bumps, yet also provides steady and secure handling around turns. -Edmunds.com. Great Gas Mileage: 37 MPG Hwy.BUY WITH CONFIDENCE: 152-Point Inspection, 24-Hour Roadside Assistance, Carfax Vehicle History Report, NO Deductible, 7-year/100,000-mile Powertrain Plan, Trip-Planning ServicesVISIT US TODAY: Faulkner Subaru is a family owned and operated dealership with over 80 years of experience in providing our customers with great cars at an excellent price. Pricing analysis performed on 11/7/2017. Horsepower calculations based on trim engine configuration. Fuel economy calculations based on original manufacturer data for trim engine configuration. Please confirm the accuracy of the included equipment by calling us prior to purchase.\nList price: $11,990\nNew Feature. Impreza 2.0i Premium, 4D Hatchback, 2.0L 4-Cylinder SMPI DOHC 16V, CVT Lineartronic, AWD, and Black w/Cloth Upholstery. Wow! What a nice smaller car. This beautiful-looking and fun 2013 Subaru Impreza has a great ride and great power. I really enjoyed driving it. It's very clean, almost new, and really fun to drive. It is nicely equipped with features such as Alloy Wheel Package (Leather Wrapped Shifter Handle and Leather Wrapped Steering Wheel), 2.0L 4-Cylinder SMPI DOHC 16V, 4D Hatchback, AWD, Black w/Cloth Upholstery, CVT Lineartronic, Impreza 2.0i Premium, New Feature, 16' x 6.5JJ Silver Finish Aluminum Alloy Wheels, 4-Wheel Disc Brakes, 6 Speakers, ABS brakes, Air Conditioning, AM/FM radio, AM/FM Stereo w/Single-Disc CD Player, Brake assist, Bumpers: body-color, CD player, Cloth Upholstery, Driver door bin, Driver vanity mirror, Dual front impact airbags, Dual front side impact airbags, Electronic Stability Control, Four wheel independent suspension, Front anti-roll bar, Front Bucket Seats, Front Center Armrest, Front reading lights, Heated Front Seats, Illuminated entry, Knee airbag, Low tire pressure warning, MP3 decoder, Occupant sensing airbag, Outside temperature display, Overhead airbag, Panic alarm, Passenger door bin, Passenger vanity mirror, Power door mirrors, Power Moonroof w/Auto-Open/Close, Power steering, Power windows, Radio data system, Rear anti-roll bar, Rear window defroster, Rear window wiper, Reclining Front Bucket Seats, Remote keyless entry, Security system, Speed control, Speed-sensing steering, Split folding rear seat, Spoiler, Steering wheel mounted audio controls, Tachometer, Telescoping steering wheel, Tilt steering wheel, Traction control, Trip computer, and Variably intermittent wipers. Not only will this Impreza save you money at the pump with its extremely good gas mileage, but will still excite your senses with plenty of zip. ANYWHERE STARTS HERE.\nList price: $13,990\nEPA 36 MPG Hwy/27 MPG City! 2.0i Sport Premium trim. Heated Seats, Bluetooth, CD Player, Aluminum Wheels, All Wheel Drive, iPod/MP3 Input. KEY FEATURES INCLUDE Heated Driver Seat, iPod/MP3 Input, Bluetooth, CD Player, Heated Seats Rear Spoiler, MP3 Player, All Wheel Drive, Aluminum Wheels, Keyless Entry. EXPERTS ARE SAYING Edmunds.com's review says A roomy interior, a commendable ride/handling balance and all-wheel drive make the 2013 Subaru Impreza a solid choice for an all-season compact sedan or hatchback.. Great Gas Mileage: 36 MPG Hwy. AutoCheck One Owner VISIT US TODAY Home to Promo Pricing! We are the largest Volume Chrysler, Dodge, Jeep, and Ram Dealer in Southern Oregon. Please visit our website at www.lithiadodgeeugene.com. Plus license and title, and $115 title and registration processing fee. Not all sales at MSRP. Price contains all applicable dealer incentives and non-limited factory rebates. You may qualify for additional rebates; see dealer for details. Some of our Pre-Owned vehicles may be subject to unrepaired safety recalls. Check for a vehicle's unrepaired recalls by VIN at\nExpires Nov 30, 2017.\nHey! Look right here! Success starts with Scott Robinson Chrysler Dodge Jeep Ram! You won't find a cleaner 2013 Subaru Impreza than this one-owner creampuff. This outstanding Subaru is one of the most sought after used vehicles on the market because it NEVER lets owners down. This car is nicely equipped with features such as 4-Wheel Disc Brakes, ABS brakes, Air Conditioning, AM/FM radio, Brake assist, Bumpers: body-color, CD player, Driver door bin, Driver vanity mirror, Dual front impact airbags, Dual front side impact airbags, Electronic Stability Control, Four wheel independent suspension, Front anti-roll bar, Front Bucket Seats, Front Center Armrest, Front reading lights, Illuminated entry, Knee airbag, Low tire pressure warning, MP3 decoder, Occupant sensing airbag, Outside temperature display, Overhead airbag, Panic alarm, Passenger door bin, Passenger vanity mirror, Power door mirrors, Power steering, Power windows, Radio data system, Rear window defroster, Rear window wiper, Remote keyless entry, Security system, Speed-sensing steering, Split folding rear seat, Spoiler, Steering wheel mounted audio controls, Tachometer, Telescoping steering wheel, Tilt steering wheel, Traction control, Trip computer, and Variably intermittent wipers. Type your sentence here.\nList price: $26,981\nA MUST SEE!! This LOCAL TRADE-IN 2012 SUBARU IMPREZZA is in IMMACULATE CONDITION is near new. **CLEAN CARFAX** After completing our RIGOROUS SAFTEY INSPECTION, we had a FANTASTIC DETAIL inside & out completed by our outstanding detail department. This EXTREMELY CLEAN IMPREZZA comes equipped with BLUETOOTH and much more. Roomy seating front and rear, and highly capable handling makes this IMPREZZA a BEST IN CLASS PICK. HURRY IN!! With the snow season here, this GEM is guaranteed to sell fast!!*Stop By Today *Come in for a quick visit at Lexus of Serramonte, 700 Serramonte Blvd, Colma, CA 94014 to claim your Subaru Impreza Sedan WRX!\nCarMax makes car buying easy and hassle-free. Our upfront prices are the same online and on our lot. All our used cars come with free vehicle history and safety recall reports (certain vehicles may have unrepaired safety recalls-check nhtsa.gov/recalls to learn if this vehicle has an unrepaired safety recall), plus a 5-Day Money-Back Guarantee, and a 30-Day Limited Warranty (60-Day in CT, MN, and RI; 90-Day in MA, NJ, and NY). Price excludes tax, title, tags and $299 CarMax processing fee (not required by law). Some fees are location specific and may change if you transfer this vehicle to a different CarMax store.\nExpires Nov 30, 2017.\nImpreza 2.0i Premium, AWD, Clean AutoCheck, Heated Seats, Local Trade, and Non-Smoker. Will stand by you come rain or shine. Steady as she goes. Are you looking for a reliable used vehicle? Well, with this hardy, reliable 2012 Subaru Impreza, you are going to get it.. This fantastic Impreza is the car with everything you'd expect from Subaru, and THEN some. Where Customers Send Their Friends Since 1929!!!\nExpires Nov 30, 2017.\nRuns mint!! This great Subaru is one of the most sought after vehicles on the market because it NEVER lets owners down!!! This is a 2012 Subaru Impreza with only 47,723 miles. This vehicle has a White exterior. This vehicle is in excellent condition and has been well taken care of. The Subaru Impreza comes equipped with a Manual 5-Speed transmission. Includes a CARFAX buyback guarantee! Standard features include: wireless phone connectivity, Remote power door locks, Power windows with 1 one-touch, Manual Transmission, 4-wheel ABS brakes, Compressor - Intercooled turbo, Air conditioning with climate control, Cruise control, Audio controls on steering wheel, Traction control - ABS and driveline, Multi-function remote - Trunk/hatch/door/tailgate, Tilt and telescopic steering wheel, Power mirrors, Head airbags - Curtain 1st and 2nd row, Passenger Airbag, 265 hp horsepower, 2.5 liter flat 4 cylinder DOHC engine, 4 Doors, All-wheel drive, External temperature display, Tachometer, Interior air filtration, Speed-proportional power steering, Clock - In-dash, Trip computer, Intermittent window wipers, Privacy/tinted glass, Rear bench seats, Front seat type - Sport, Daytime running lights, Stability control, 4WD Type - Full-time, Transmission hill holder, Rear defogger, Center Console - Full with covered storage... This is a beautiful vehicle. There is no excuse why you would even think about letting this Subaru Impreza pass you by! Here at Guaranty Chevrolet, we pride ourselves on being extremely competitive with the going prices on all our vehicles. We will give you a fantastic deal and you will receive a one of a kind experience and five star customer service from our friendly staff here at Guaranty. We encourage you to call us at (800) 766-9231 with any questions you have. All Trade in's are welcome, and we pay top dollar. Also, if you need help getting financing secured let us know! Remember, 'Eggs are cheaper in the country, and so are cars and tr\n4WD/AWD,ABS Brakes,Air Conditioning,Alloy Wheels,AM/FM Stereo,Automatic Transmission,Auxiliary Audio Input,Bluetooth,CD Audio,Cloth Seats,Cruise Control,Front Seat Heaters,Overhead Airbags,Power Locks,Power Mirrors,Power Windows,Rear Defroster,Side Airbags,Sunroof(s),Traction Control Price excludes tax, title, tags and $299 CarMax processing fee (not required by law). Some fees are location specific and may change if you transfer this vehicle to a different CarMax store. Prior Use: Fleet\nExpires Nov 30, 2017.\nThis is the only Subaru Impreza WRX STI in red in the WHOLE COUNTRY! It's hard not to get excited about a car of this magnitude. May I present to you the 2011 Subaru Impreza WRX STI, a 6 speed All Wheel Drive MONSTER! Choose from three modes of driving characteristics with Subaru Intelligent Drive (SI-DRIVE) technology to suit your preferred taste in control. Then put the power of Symmetrical All-Wheel Drive and 305 Turbocharged horsepower in your hand. The Driver-Controlled Center Differential (DCCD) works with the close-ratio 6-speed manual transmission, so you can adjust the amount of lock between the front and rear wheels, letting you match your vehicle's handling attitude to your own. We are happy to talk about this car all day, so call or text us at 716-404-5456 for more information or to schedule a test drive TODAY!\nCome test drive this 2012 Subaru Impreza! Boasting the latest technological features inside an attractive and versatile package! This 4 door, 5 passenger sedan has just over 80,000 miles. Subaru paid particular attention to efficiency and practicality with the following features: air conditioning, cruise control, and power windows. Smooth gearshifts are achieved thanks to the 2 liter 4 cylinder engine, and all wheel drive keeps this model firmly attached to the road surface. Our experienced sales staff is eager to share its knowledge and enthusiasm with you. We'd be happy to answer any questions that you may have. We are here to help you.", "label": "Yes"}
+{"text": "Shock Absorber, Rear Bilstein, MX5 Mk3.5/3.75 RHT\nGenuine Mazda Part\nGenuine Mazda replacement front shock absorber for later Mk3 models that have Bilstein suspension. Same part fits both sides so two are required per car. It is always recommended that shock absorbers are replaced in pairs.\nFits all retractable hardtop Mk3.5 & 3.75 models, 2008>2015 with Bilstein suspension only.\nPlease Note: These will NOT fit convertible hard top models.\nOnly: £204.34 ex Vat\nTotal: £245.21 inc Vat\nPlease Note: Customers outside the EU will only pay the excluding VAT price. MX5 Parts have a clear pricing policy where we will always show the total price you pay. When comparing prices, please be aware that many other suppliers show their prices without VAT\nNone In Stock\n4 due in 4 or more weeks", "label": "Yes"}
+{"text": "Car Rental Icon in Other Styles\nRelated icons are the icons with matching tags, as well as all travel icons\n. All icons are in the same flat style. You can either download free PNG icons or buy SVG vectors\nIdea of Car Rental Icon\nThe image is of a car. The front part of the car is shown. Directly above the car is a key. The length of the key is almost the width of the car. The two items are not touching each other.\nThis is a Car Rental icon. It is available in PNG and vector. Downloading is free for PNGs up to 100x100px.", "label": "Yes"}
+{"text": "Scrapped my car with scrap car brentwood would just like to say the service was top notch and my vehicle was collected the same day, cheers guys.\nDanny Howlett, 2011 Bmw M3, Hutton\nScrapped my van with scrap car brentwood after breaking down on the m25 junction 28 they were out to me within 45mins payed what they quoted on the phone loaded up and gave me a lift to the services, thank you.\nJoe Davies, 1999 Ford Transit, Blackmore\nScrapped my motorbike with scrap car brentwood after an accident on the high street, i wasnt mobile at the time and the motorcycle wasnt in easily movable they sent 2 drivers who were great did all the lifting.\nAndy Stone, 2014 Suzuki GSXR 1000, Shenfield\nRecently scrapped vehicles aslo include\nDarren Martins, 2005 Porsche 911, Ingatestone\nCecil Warrens, 2007 Audi A3, Warley\nDanny Hunters, 2004 VW Golf, Mountnessing\nDr Warren, Lamborghini Gallardo, Stondon Massey\nHelen Rogers, 2002 Ford Fiesta, Wyatts Green\nGary Devon, 1999 Mitsubishi Shogun, Navestock\nReece Palmer, 1995 Land Rover Defender, Ingrave\nSol Mumba, 2008 Mercedes C class, Kelvedon Hatch\nWez Barker, 1997 Vauxhall Brava, South Weald\nScrap car brentwood have been practising scrap car collection brentwood for the past 10 years, unlike many scrap car dealers we are reliable registered and legally allowed to undertake car disposal in essex.\nScrapping a car in brentwood couldnt be easier, we pay on collection and as long as the car van or motorcycle is as described the price will not change when we arrive guaranteed.\nUnlike most scrap car companys in brentwood we offer good prices and buy newer vehicles, we are very intrested in people who are looking to sell damaged cars in brentwood regardless of the year new or old.", "label": "Yes"}
+{"text": "Fisker Inc., a Los Angeles, CA-based maker of electric vehicles, raused $50m in Series C financing.\nThe round was funded by Moore Strategic Ventures, the private investment vehicle of Louis M. Bacon.\nThe company intends to use the proceeds for the next phase of engineering work on the Fisker Ocean all-electric luxury SUV – due for launch in 2022.\nLed by chairman and CEO Henrik Fisker, chief technology officer Burkhard Huhnke Fisker, senior vice president of engineering Martin Welch and communications advisor to the CEO Simon Sproule, Fisker is the designer and manufacturer of electric vehicles and advanced mobility solutions.\nThe Fisker Ocean is a vehicle whose celiveries will start in 2022. It will be offered in a four-wheel drive configuration on all trims except for the base model (Rear wheel drive) – reflecting its off-road capabilities. The standard four-wheel drive configuration will deliver an output of more than 225 kilowatts (more than 300 horsepower), with an ultra-high performance version targeting zero-to-60 mph in less than three seconds. Have a look at the vehicle’s details here", "label": "Yes"}
+{"text": "Get Instant Pricing with Edmunds Price Promise℠\n1Look for \"Special Offers\" on a specific car\n2Get your upfront, locked-in price from the dealer\n3Go to the dealership to buy your car with no haggle\n2011 Lexus IS F 4dr Sedan (5.0L 8cyl 8A)\nJust got one and so far it is superb. Will recommend.\neverything is standard in this car, unlike merc or BMW one has to pay for options. Drives awesome.\nWrite a review and rate your own car.\nSee which cars and trucks our editors recommend\nAbout Us |\nContact Us |\nAffiliate Program |\nDealer Center |\nPrivacy Statement |\nVisitor Agreement |\nYour Ad Choices\n| Site Map\n© Edmunds.com, Inc.", "label": "Yes"}
+{"text": "Durable Construction: This 8×5 Tandem Custom Build Trailer is made to last. Constructed with 4 light truck tyres and a GVM 2000kg rating, you can be sure of reliable performance even in the toughest of conditions.\nVersatile Design: Featuring a ramp door at the back, this custom build trailer allows for easy loading and unloading of cargo. Its hydraulic brakes also ensure maximum control when towing heavy loads.\nEasy Maintenance: Thanks to its grey colour finish, this custom build trailer is easy to maintain and clean.\n- Made To Order Only ( 8-10 Weeks)\n- 8×5 Tandem Custom Build Trailer – Tool Box On Each Side\n- Space In The Middle\n- 4 x Light Truck Tyres\n- Hydraulic Brakes\n- Gvm 2000kg\n- Grey Colour\n- Ramp Door At The Back", "label": "Yes"}
+{"text": "No Aluminum Ram in the Near Future\nIt looks as if Ford and General Motors will have more aluminum to themselves over the next several years. Ram won’t be picking up any of it with its horns for quite a while.\nFiat Chrysler announced its five year plan for the company—all of the news!—yesterday, and as you can imagine, there were some whoppers. For enthusiasts, the biggest news was the demise of SRT as a standalone brand—though it will still exist as a performance division within the company.", "label": "Yes"}
+{"text": "RICHMOND, VA. - Police are searching for three men wanted for crashing a vehicle in a neighborhood after eluding officers. Richmond Police tried to pull over the vehicle on Hopkins Road at about 2:15 Wednesday morning when they noticed its a headlight was out.\nInstead of stopping, the driver sped off, police said.\nThe vehicle eventually crashed in a cul-de-sac on Rusk Avenue. The three men inside the vehicle jumped out and ran. Police were not able to catch any of the men. No other cars were involved in the crash.\nThey are asking anyone with any information to call Crime Stoppers at 804-780-1000.", "label": "Yes"}
+{"text": "Yokohama and Kumho sign new agreements\nYokohama Rubber Co. Ltd. announced it has signed a cooperative research and development agreement as well as a license and technology exchange agreement with South Korea’s Kumho Tire Co. Inc.\nThe agreements are based on the master technological alliance agreement signed by the two companies earlier this year on February 15.\nUnder thenew agreements, Yokohama Rubber and Kumho Tire will begin joint research and development on the tire-related technologies of the future, including ultra lightweight tires and other environmentally friendly tire technologies as well as new concept tires.\nKumho Tire, established in 1960, is headquartered in Gwangju, South Korea. The company is a core member of the Kumho Asiana Group, which also includes Asiana Airlines.\nKumho Tire recorded consolidated net sales of 3,699 billion won ($3.5 billion) in fiscal 2013. The company has eight tire plants in South Korea, China, and Vietnam and employs about 11,000 people.\nYokohama Rubber, founded in 1917, is engaged in the manufacture and sale of tires and a variety of products in its Multiple Business segment, including high-pressure hoses, sealants, marine hoses, and golf equipment.\nIn fiscal 2013 (ended Dec. 31), the company recorded consolidated net sales of 601.6 billion yen ($6.1 billion), with tires accounting for 479.5 billion yen of the total. Yokohama Rubber operates 12 tire plants (not including those currently under construction) in seven countries around the world and employs about 20,000 people globally.", "label": "Yes"}
+{"text": "Last post on Jun 17, 2013 at 4:48 PM\nYou are in the Jeep Cherokee and Jeep Grand Cherokee\nWhat is this discussion about?\nJeep Grand Cherokee, SUV\n#1 of 1070 Grand Cherokee transmission problem\nDec 09, 2006 (1:29 pm)\nI have a 1998 JGC with Quadra Trak. When cold, I can be driving down the road, pushing down on the gas pedal when suddenly I'm coasting, the engine will rev when I push down on the gas but the transmission won't engage. I have to continue pushing on the gas pedal and letting off until finally it will engage and away I go. Anyone have any ideas of what this could be. It did it last winter and again this winter but never had a problem in the warm weather.\n#2 of 1070 Re: Grand Cherokee transmission problem [jtdl]\nDec 10, 2006 (7:41 am)\nWhen was the last time the tranny fluid was changed? Sounds to me like you could have some water in the fluid that is freezing in cold water. A tranny that doesn't have enough fluid in it will do the same thing, only it will do it all the time.\n#3 of 1070 Grand Cherokee Laredo engine dies after running 15-20 miles.\nDec 11, 2006 (2:27 pm)\nGoing down the highway, my engine dies, I have figured out it is not getting fire from the coil. After it cools off it starts again and runs good for a little while longer. I get a code of \"11\" on my display. Can yo tell me what to look for to repair.\n#4 of 1070 Re: Grand Cherokee transmission problem [mullins87]\nDec 11, 2006 (3:55 pm)\nI wish that was the problem but I don't think it is since it doesn't have to be freezing for it to do this - just cold. My husband cleaned the filter and pan and found shavings in the pan also. Any other ideas of what could be going on?\n#5 of 1070 2005 jeep grand cherokee transmission PROBLEMS!\nDec 20, 2006 (1:18 pm)\nHi I'm new to this forum. I purchased a 2005 jeep grand cherokee with the 4.7 v8, in may of 2006 it only had 9800 miles on it. Since June of 2006 I had experienced a delay when putting the truck in reverse after it sat for a period of time. I brought it to the dealer and they did a transmission cooler filter update (which supposedly was the problem). I still had the same problem, brought it back they did \"another\" update, well that turned out to be the same update. Since then I am still experiencing the same problem, slipping when putting it in reverse when the truck sits. I just had it to the dealer for other problems (exhaust manifold leaks, sun roof not working, climate control head lights not working differential noises, and engine noise on cold start). The fix everything but the transmission problem, engine noise and differential noise. The transmission problem the service manager told me is \"normal\" that you have to start the truck let it sit for approx. 30 seconds than put it in reverse that the problem I am having is normal. Any body experience this problem? and what solutions were found Please help. Im sick of the dealer run around\n#6 of 1070 Re: 2005 jeep grand cherokee transmission PROBLEMS! [jrslost67]\nDec 28, 2006 (9:25 pm)\nI am experiencing this probelm also. When I went to dealer they stated that I need to get my transmission flushed. I too have a 2005 JGC. I have been traveling a lot so my miles are now over 30K; however, this vehicle should not be doing this. I am also experiencing problems with the 4wd system however they are unable to determine what the problem is.\n#7 of 1070 1996 Jeep Grand Cherokee trans problems\nDec 29, 2006 (8:00 am)\nI have had problemn with tranmission slipping and is getting worse. When going down the road the car shudders from time to time as if the engine and trans are missing each other. We have had this car since new and are meticulous in our maint. The car repair place we had been going to said it was just wear problems but the shuddering is getting worse and I'm afraid the car is becoming unsafe. The rest of the car looks and acts brand new and engine is in top shape. Am I missing somethin here? Trans problem or something else. Should I put a new trans in? We'd like to keep it for a good spare vehicle.\n#8 of 1070 Re: 2005 jeep grand cherokee transmission PROBLEMS! [rhodesre]\nJan 02, 2007 (4:33 pm)\nLet me tell you from experiance freind to never ever be gotton again reading all these post makes me feel as if i am reading my onw \"jeep life stories\" for the past two year. I have a 2000 GJC Limited and when i bout it i loved how it looked it looked great - I was a little hesitant to buy it because I did not feel right about it for some reason i don't know i belive it was becasue of how it shifted in and out of gears which wasn't a brilliant smoth transision I did buy - I convinced myself that I was being to picky and bought the darn car. What in the world was i thinking guys the same thing happens to me when i'm on the road the jeep acts like it some times dosen't want to get out of second gear and it rushes high and cathes itslef all the time - now get this - I have taken this car to the dealer many many many many times and have asked what in the heck is wrong with this car they all tell me it this or its that I ask is it the trans they say no they say just get it serviced sir well I've done that and it still slipps and acts sick mean while the dealer wants to brainwash me into thinging that all is ok - all is not ok I have spent over 2500+ plus on this vehichle replacing parts to serviding the jeep yet still I am never without these dumb slipps - i am more than conveniced that this is no longer a small problem with the jeep but that chrysler has really put together a terrible car for there customers how dare them put me through all this how dare them - I am more certain that these jeeps are more like trash than good runing SUVs when i read the ladies post above she has a 2005 JGC and her is acting stupid too - I wonder do the people actrully drive these cars they seel i'm mean really if they did they burn them all up because they are useless - us consumers spend thousands of dallars for these cars and many of us are told by the very sells people \"hey great car, no need to worry itall run like a pearl....\" this is a bunch of hog waist they do everything but run like a pearl they run absolutly terrible! I will be done paying for my jeep this year! you can be sure I will never ever purchase another JEEP!\n#10 of 1070 Re: Grand Cherokee transmission problem [jtdl]\nJan 05, 2007 (2:30 pm)\nLikely a Throttle position sensor", "label": "Yes"}
+{"text": "ATS Built NV5600 Transmission\n2000-2005 Dodge 5.9L Cummins (6-Speed)\nATS Built NV5600 6-Speed Manual Trans, 2000 - Early 05 Dodge 4WD\nBuild Date Guide:\n00-05 Transmission: Trucks built from Aug-99 to Dec-03\nTruck Freight Item: Allow 1-2 Weeks for delivery. Truck freight charges apply.\nCustomer Reviews - Include your order number for a chance to win a $100 GiftCard", "label": "Yes"}
+{"text": "Subaru — Coolant Leak\nOwners of some Subaru 1999-2009 Imprezas and Foresters, 2000-09 Legacys and Outbacks and 2006-09 Tribeca models may complain of a coolant leak beneath the engine compartment. On investigation, you may find that the leak is actually antifreeze being expelled from the coolant reservoir overflow.\nOne likely cause of this, reports Subaru, is a stuck pressure valve in the radiator cap. The valve sticks because debris at the bottom of the reservoir gets sucked up through the coolant hose as the cooling system cools. Replacing the cap, cleaning the reservoir and modifying the coolant hose should eliminate the condition.\nStart things off by pressure-testing the radiator cap. If it passes the test, this information doesn’t apply, and you should continue troubleshooting until the issue is resolved. If the cap fails the pressure test, replace it but don’t install it yet. Next, remove the reservoir and clean the inside by flushing with clean water. Reinstall the reservoir, then fill with a 50/50 mix of coolant to the Full mark on the side.\nNow cut the coolant hose about 3/4 in. from the end at a 45° angle. This will ensure that any debris in the reservoir doesn’t get sucked back into the cap. Reinstall the hose and pressure cap. To complete the repair, start the engine and let it reach operating temperature. Then shut it down, let the system cool and add coolant to the Full mark on the reservoir.", "label": "Yes"}
+{"text": "If you need further help setting your homepage, check your browser’s Help menu\nPolice Car Accessories\nResearch information about Police Car Accessories including all types of transportation equipment required for mobile patrol. Check out the full product listing, read the latest articles, and watch free training videos.\nDeals & Specials\nPolice Car Accessories Buy Direct\nPolice Car Accessories Products\nRelated Releases & Announcements\nRelated Sites and Reports", "label": "Yes"}
+{"text": "1999 ISUZU RODEO FUSE BOX\nIsuzu Rodeo (1998 - 1999) - fuse box diagram - Auto Genius\n24 rowsNov 04, 2018Isuzu Rodeo (1998) - fuse box diagram. Isuzu Rodeo (1998 – 1999) – fuse box diagram. Year of production: 1998, 1999NUMBERFUSE NAMEAFUNCTION1ACCET20Accessory sockets, Dash fuse box2———3(ANTI THEFT)10Anti·theft and keyless entry system, Dash fuse box4TAIL/ILLUM LIGHT15All Shift indicator, Alarm and relay oontrol unit, Dash and console See all 24 rows on wwwgenius\nIsuzu Fuse Box Diagrams • FuseCheck\nIsuzu Amigo, Rodeo, Wizard (1998-2004) Fuse box diagram (fuse layout), location, and assignment of fuses and relays Isuzu Amigo, Isuzu Rodeo, Isuzu Rodeo Sport, Isuzu\n1999 Isuzu Rodeo: fuse panel blows amp fuseter\nHello, I have a 1999 Isuzu Rodeo 3.2 L. My problem is that when I go to start the vehicle, the fuse in the fuse panel blows and the car does not start. The fuse that blows is a 10 amp fuse and is labeled starter.\nSOLVED: Where is the fuse box and relay box located on a\nBlinker problems with my 1999 Isuzu trooper. In the fuse box there will be those black boxes, they are called relays, there will be one of them for the flasher. You could swap this with a known good one (AC or something) and see if that helps your problem. Jun 20, 2008 | 1999 Isuzu Trooper.\nISUZU 1999 RODEO WORKSHOP MANUAL Pdf Download |\nView and Download Isuzu 1999 RODEO workshop manual online. RODEO 1999. 1999 RODEO automobile pdf manual download.\nRelated searches for 1999 isuzu rodeo fuse box\n1999 isuzu rodeo problems1999 isuzu rodeo for sale1999 isuzu rodeo value1999 isuzu rodeo transmission1999 isuzu rodeo specs1999 isuzu rodeo 4wd1999 isuzu rodeo transmission problems1999 isuzu rodeo parts catalog", "label": "Yes"}
+{"text": "Yamaha YZ tech info\nYamaha YZ description\n2014 YAMAHA YZ 250F, The all new 2014 YZ250F has a brand new EFI engine, an entirely new chassis, superior mass centralization and new suspension components for improved high rpm power with truly instinctive handling. Available from October 2013.\nYamaha YZ for Sale\nMoto blogMon, 28 Apr 2014\nA crowd of 62,217 fans in East Rutherford, N.J. witnessed the coronation of Ryan Villopoto as the 2014 AMA Supercross Champion. The Monster Energy Kawasaki rider took the holeshot and led very lap in a decisive victory to clinch the championship, his fourth in a row.Wed, 16 Nov 2011\nYamaha is debuting a new heavy-duty utility motorcycle concept at the upcoming Tokyo Motor Show. Described as the “SUV motorcycle”, the Yamaha XTW250 RYOKU was designed to carry heavy loads for both on and off the road. The concept’s name suggests it may share elements of Yamaha’s XT250 and TW200 dual sports.Wed, 21 Sep 2011\nAre motorcycles more environmentally friendly than cars? Ask most people that question and their initial response would probably be “yes” because motorcycles are more fuel efficient, and they release less CO2. But is that the whole story? MythBusters‘ Jamie Hynerman and Adam Savage are going to find out on the Emmy-nominated show’s fall season premiere, Sept.\nYamaha YZ by State\nYamaha YZ by City\nYamaha YZ by Color", "label": "Yes"}
+{"text": "Vankor 350 | Texas Motor Speedway Race Advance\nTeam: No. 42 Niece/MG Machinery Chevrolet Silverado\nDriver: Ross Chastain\nChastain on Racing at Texas: “Man we really want to get one of those cowboy hats this weekend in Texas,” said Chastain. “I love racing in the Truck Series and I’m thankful for the opportunity with Al Niece and Niece Motorsports. Texas is a fun track, and I know the whole team has put together a strong truck to go out and contend for the win on Saturday night.”\nChastain at Texas: Saturday night’s NASCAR Gander RV & Outdoors Truck Series race at Texas Motor Speedway marks Chastain’s eighth start at the Texas track. In his previous seven starts, Chastain has two top-10 and three top-15 finishes. Chastain’s best finish of seventh came in the spring event in 2019.\nChastain has 10 NASCAR XFINITY Series starts at Texas Motor Speedway, with his best finish of second coming last fall.\nIn addition, Chastain has four NASCAR Cup Series start at Texas Motor Speedway, with his best finish of 18th coming in 2018.\nTIL NEXT TIME, I AM STILL WORKING ON MY REDNECK!", "label": "Yes"}
+{"text": "Is it possible to ride a dirt bike without using an air filter?\n- A lot of people ask me whether they can ride a dirt bike without an air filter since the air filter is so inconvenient to have to use. The short answer is no, you are unable to ride without an air filter in your vehicle. If you do so, you will introduce a large amount of dirt, dust, debris, and germs into your engine since your dirt bike will not be able to prevent some layer of dirt that you will meet while riding.\n- 1 Can you clean a dirt bike air filter with dish soap?\n- 2 Can bike air filter be cleaned?\n- 3 What do you clean a motorbike air filter with?\n- 4 Can I clean my air filter with soap and water?\n- 5 What happens if air filter is dirty in bike?\n- 6 How often should you clean your dirt bike air filter?\n- 7 Can a paper air filter be cleaned?\n- 8 What can I use as air filter oil?\n- 9 Can I clean my air filter with petrol?\nCan you clean a dirt bike air filter with dish soap?\nUsing warm, soapy water to clean After you’ve cleaned it in the filter cleaner, you’ll need to wash it with soap and water to remove any remaining residue. I recommend washing your dishes with dish soap and warm water. This will remove any extra solvent as well as any debris that has remained on the filter. Next, dry the filter in the sun, preferably overnight, to ensure that it is completely dry.\nCan bike air filter be cleaned?\nUse warm soapy water to wash your hands The filter will need to be thoroughly cleaned with soap and water once it has been cleaned in the filter cleaner. Using dish soap and warm water is recommended. Any remaining solvent and debris on the filter will be rinsed off as a result. Next, dry the filter in the sun, preferably overnight, to ensure that it is fully dry.\nWhat do you clean a motorbike air filter with?\nBecause of the significant oil-eating chemicals in dishwashing detergent, it works well, although shampoo or dishwashing liquid also works well. Finish by rinsing thoroughly with fresh water at the end. It is necessary to allow your filter to dry completely before re-oiling it.\nCan I clean my air filter with soap and water?\nIt might be just what your vehicle requires. Cotton, paper, foam, and a combination of these materials are used to make air filters. Make careful to check your owner’s handbook or with the air filter manufacturer to ensure that using soap and water is safe, and to determine whether you have an oil-coated filter. An oil-coated air filter should not be cleaned with soap and water.\nWhat happens if air filter is dirty in bike?\nIt is possible for the air cleaner of a motorbike to get clogged, resulting in a reduction in the amount of air drawn into the engine’s intake system. When this occurs, your engine suffers as a result. Poor fuel efficiency, power loss, or a slow throttle response are all possible symptoms of this problem. If you ignore a clogged air filter for an extended period of time, the engine will not start at all.\nHow often should you clean your dirt bike air filter?\nMost motorcycle manuals will advise “servicing often” based on the amount of dust and/or rain present, as well as how often you use the bike at full power. Every 2-4 rides is a reasonable average.\nCan a paper air filter be cleaned?\nA paper filter may be cleaned by blowing it out with compressed air, but it should never be washed unless you want to spend money on replacing the filter element. No. It will be ruined by water. Simply remove it and tap it on a flat surface (such as a driveway) to dislodge any dirt that has accumulated.\nWhat can I use as air filter oil?\nAir filter oil may be substituted with great success with bar and chain oil (which is basically a thick sticky oil with dye in it).\nCan I clean my air filter with petrol?\nDO NOT USE GASOLINE TO CLEAN YOUR AIR FILTER. While it removes old oil residue and pollutants from foam filters, gasoline also breaks down the foam cells and the glue that holds the foam strips together, making them less effective. To effectively clean an air filter, we recommend that you use treatments that are designed specifically for air filters.", "label": "Yes"}
+{"text": "Work commitments had slowed down the pace for Mike Humble and his dead Saab 9-3. Patience, luck and plenty of hot tea seems to have paid off and now it’s time to enjoy!\nWhen I took delivery of my Saab 9-3 last month, it didn’t look good to be honest; it was in pieces, a non-runner and delivered on the back of a flat bed Transit. Horror of horrors, the delivery driver turned up bang on 5.30pm just as the neighbours and commuters were returning home. I wanted to curl up and die as he slowly winched the Saab on to my drive as his van was blocking the road. I have understanding neighbours but do try to avoid making my driveway look like the set of scrapheap challenge. Besides, they can’t complain, as it tends to be my door they come calling on when one of their cars goes pop. Following the sale of my lovely 420 recently, I really couldn’t decide what to go for next.\nAfter having Keith’s Alfa Romeo 156 for a short while I almost went for one of those. Or…did I want another Rover? I could have had a seriously cheap 75 V6 or a ZT 1.8 with a blown engine but in the end, I went for a car that I have always found to be as effortless to drive as sleeping, a Saab. Not being one for doing things by half, not only did I buy a Saab, but one that was dead and had a boot full of oily bits. It was however, very very cheap and complete with heaps of paperwork, along with lashings of lovely MOT. It has a nice spec too, including all round electrics, cruise, climate, heated seats, alloys and CD; in fact pretty much everything a middle aged man could ever require.\nThe car was sourced from a leading internet auction site via a trader who subsequently knew of and didn’t understand his cars. Phoning him before bidding, he blurted out that he had bought the car to sell on before it went wrong. The green slip had a name tippexed out. After holding the slip against my halogen torch, the trader’s own name and address was revealed. The turbo was lying in the boot with a snapped turbine shaft. How the thing had not munched the blades and flummoxed the engine remains a mystery. Regardless, I had bought a non runner (much to my partner’s disgust) and I needed to get the thing up and running.\nContrary to what you may hear or read, a Saab 9-3 is a lovely thing to steer around in; they are pretty well made, effortless to drive, well equipped and have a certain charm of their own. Even though many of the underpinnings are GM or Vectra based, what you can see and touch are indeed certainly Saab. Its chassis, braking and suspension system is pure Vectra, and while purists may complain about the GM input, parts such as pads, discs and dampers are cheap as chips from motor factors. They don’t even cost that much to run either, with consumable items being plentiful and no dearer than many other volume cars. They are superb at soaking the miles, and those seats are a simply amazing place to sit for hours on end, and are heated too.\nYes they have their problems like any other car; the steering rack for example is known for splitting the bulkhead on earlier cars. However, bearing in mind that the newest model shape such as mine will now be almost 10 years old, surviving examples will have either been modified or have no such problem. They don’t take kindly to abuse or skimped servicing though, but what you tend to find with a Saab is that they are mostly loved and cared for by previous owners.\nAs I have said before, they tend to be nice cars driven by nice people. Without a doubt, they represent a sound used purchase when bought wisely; a well cared for car can and will go on and on. Doors make a wonderful clunk when you shut them, the bonnet is heavy and vast while the dashboard is amazingly well crafted and an ergonomic masterpiece without the slightest squeak or rattle. Loadspace is vast even with the seats up.\nSwitches and controls operate with a reassuring feel. A Saab is a really are a nice place to be. I adore the overall quirkiness and idosyncracy that Saab have always been know for, and it’s this odd ball mix of quality and quirk which attracts me to these cars, and has for many years. People who have never driven one or travelled in would not even understand what I write. Think of them of as a loved old leather jacket, a pair of Loakes Oxford brogue shoes or an old Dennon hi-fi system – they look, feel or sound – just right!\nGetting back to matters current, it was obvious the car had either run out of oil or suffered a starvation issue, a common fault with the B200 Saab engine, especially if skimped on servicing or run on the wrong oil. The dipstick showed the car to be overfilled with oil, a sure sign that the oil light has illuminated while driving.\nThe question in my mind was whether the car was okay. The sump was removed and my diagnosis was indeed correct, the sump was caked in carbon and gunge and the all important sump strainer was mostly blocked too. Removing said strainer, I left it to soak in a bowl of diesel, and filled the sump with a mixture of hydrochloric acid and diesel which emits an interesting smell, but boy it shifts the grime. I removed a bearing cap to see what the damage was, only to find average wear and tear. The valve cover came off once again revealing only general wear on the camshaft lobes.\nWas I in luck after all. Some previous mechanic had removed the turbo and slung all the nuts and bolts into a plastic tub in the boot so I was left with an automotive jigsaw puzzle, so I set to work putting some life back into the car. A used turbo was ordered from a contact in the North Midlands for a decent price of £140 and a few days later a man in a van brought me a large cardboard box. I was ready to rumble at last. Saturday came and I was up with the lark, looking resplendant in my “Roveralls,” spanners and tea in hand, it was game on!\nArmed with a cup of tea and a fresh packet of fags, I set upon fitting the new turbo but after doing much head scratching, I couldn’t see where the various copper washers needed to go and which ones were best replaced. The dealer network on the whole is bloody superb, many selling the marque ever since it’s introduction in the UK. My local dealer is situated in the little village of Turners Hill which is about 15 minutes east of Gatwick Airport, a phone call was made to their parts department and they couldn’t have been more helpful.\nI owned another 9-3 SE a few years back and they bent over backwards then, their parts guy Mark suggested e-mailing a screen shot from the parts computer showing an exploded view of the turbo and its related fixtures and fittings. Can you imagine your local Ford or Vauxhall dealer doing the same? – I printed off the diagram and phoned back after jotting down what I needed. Everything was in stock, so I leapt into the Focus and sped off to the dealer but then I hit trouble.\nTraffic was awful, so I rang them back to ask if they could leave the parts and invoice in the showroom and tell me the total so I could hand over the right money, “it’s okay sir, I’ll hold on another half an hour for you” came the parts managers reply. Arriving back home, the work began and after a couple of hours the turbo was fitted, the coolant added, oil level checked – it was time to see if any life was left in the old girl.\nI fitted the charged battery and placed the key in the strange floor mounted lock, turning the key firstly to ignition, I then took a sharp intake of breath. The key was turned all the way with the same dread and fear of a late ’70s Northern Irish politician, teeth clenched, holding my breath with one eye closed and the other one half open – I started the engine. Rather than being met with the sound of a huge bang and components heading skyward, the oil light extinguished straight away and the B205 series engine simply purred on a fast idle with just the usual smoke from my grubby hand prints and WD40 burning off the manifold and turbo.\nMy efforts drew a small audience too, my next door neighbour is a retired engineering company director and when ever I am out doing a job on a car, he never fails to come outside for a look and a chat. Stella the cat, who also is my workshop supervisor continued sleeping on the parcel shelf unaware and disinterested of my toils but I was so happy I could have cried. Of course there has also been other items to attend to, but none were tackled until I knew at least the car would run under it’s own power, but first, the all important road test needed to be done.\nAfter a quick shower, I threw in a gallon of juice and slipped the leather clad lever into gear checking I had my mobile phone with me. Close to where I live is the A264 and A24 which bypasses leafy Horsham, a dual lane by pass perfect for those sneaky test drives!\nMy previous Saabs have been an automatic 9000 Eco – a 9-3 SE Turbo (185) and a 9-3 SE 2.3 non turbo, so a manual 9-3 Ecopower is a new experience. What a car, unlike the whiz bang of the 185bhp of old, the 9-3 Ecopower feels like a large six-cylinder with bags of torque and a steady increase in power as the revs climb. If you caught the turbo off guard in my old model, its would simply do nothing, but with the 154bhp Ecopower unit, it’s designed to pull low down and this coupled with very long legged gearing (70mph is indicated with 2600 rpm) and twin balancer shafts in the engine, makes for a brilliant refined cruising car that should give a decent fuel return.\nThe brakes were scary thanks to months of surface rust, but I can now say that the anchors now do the job nicely even though at first were almost non existent. Returning home I flushed the oil through one more time and called it a day – besides, it was dinner time and I felt sore and tired. A couple of longer drives followed to gain some confidence in the car including a nice high speed drive down to Worthing – a round trip of about 50 miles, returning a decent 36mpg – not too shabby at all bearing in mind the car weighs nearly as much as the County of Suffolk. The car has now been cleaned, scrubbed and hoovered within an inch of it’s life, and is now eight times the car it was than when it arrived covered in dust, cobwebs and bird lime.\nWell, the very next day I thought I would nip to the paper shop Saab style, placing the key into the floor mounted ignition switch I turned the key – nothing! just the sound of a healthy battery and a cranking engine. Locking the car and setting the immobiliser, the car was then unlocked again thinking it was just one of those odd glitches – nothing, there was indeed a problem and I was mystified and baffled. A really handy bit of kit I own, is an OBD2 diagnostic code reader, this was duly plugged in to do a scan – no pending or stored faults.\nThe kettle was once again flicked on and I had a good long hard think about what it could be, no doubt something really obvious too. Returning back to the car, once again I turned the key and hey presto! it fired up – most strange, so I left it sat there ticking over for a while and while I stood there looking perplexed and gormless, the car gave an ever so slight cough – “a-ha you bugger” I said out loud, and almost as if it heard me, it did a little cough once more.\nRe-fitting the code reader, it now had two pending codes and one stored – crankshaft sensor, the part was collected later in the week and fitted. Sounds simple, but anyone who has fitted one of these will know you need wrists and hands like E.T to get the torx bit onto the locating screw. Since this minor hiccup, I’m pleased to say nothing else has caused concern, and as the weeks pass, the confidence grows.\nMore recently I have swapped over a blown speaker in the dashboard, fitted new bulbs to some of the dash switches, got the heater blower working (an unplugged connector) the horn now blasts a twin tone sound rather than a squawk and occasional blown fuse, and the sometimes erratic electric self locking tailgate now functions as it should. Driving the Saab changes your driving style, don’t ask me why but it does.\nMotormouth Jeremy Clarkson says the same thing – and he’s so right. When you indicate to overtake on motorways, people will flash you out, you no longer have the urge to be bouncing off the rev limiter, you find yourself stopping to let frail old ladies cross the road and you find yourself driving better, with more care, with more consideration. However, I can say that i’m still not quite 100% Saab driver, simply because I do not own nor indeed have a hankering for a dark coloured roll neck sweater, but other garments from the M and S Blue Harbour range do indeed grace my wardrobe.\nThe initial plan was to cash in and sell the Saab on for a small profit, but you know what? I can’t do it – well not just yet anyway. The heated seats, the utterly superb climate control, the vault like clunk when you close the doors, the space and ergonomics of the unmistakable Saab interior all add up to a lovely car – one of which I shall waft around in for a little while longer before the posters adorn it’s windows!\n- Essays : Selling the brand - 18 November 2023\n- Review : Land Rover Discovery – first off the line - 15 September 2023\n- Events : Leyland National 51 gathering, Whitehaven 29-30 April - 5 April 2023", "label": "Yes"}
+{"text": "A driver injured in a crash in Carluke last month remains in a critical condition in hospital.\nThe 61-year-old man was injured as his Citroen C1 collided head on with a Renault truck on the A721 Kilncadzow Road on January 25.\nHe was taken to Wishaw General Hospital with serious injuries. The driver of the Renault, a 51-year-old man, was also taken to Wishaw General, and was later released following treatment.\nPolice Scotland have this week appealed for information surrounding the crash, and urged any witnesses to come forward.\nOfficers are especially keen to trace the drivers of three other vehicles on the road, heading towards Carliuke, at the time of the incident.\nA force spokesperson said: “Around 8.10am on Wednesday, January 25, a Citroen C1 car was being driven westbound on the A721 Kilncadzow Road when it collided head on with a Renault truck travelling eastbound.\n“Emergency services attended and the 61-year-old male driver of the Citroen car was taken to Wishaw General Hospital suffering serious injuries.\n“The driver of the Renault van, a 51 year old man, was also taken to Wishaw Hospital. He was later released following treatment.\n“The 61-year-old driver of the Citroen remains in hospital in a critical condition.\n“Enquiries continue into establishing the circumstances of the crash and officers are appealing for any information on the incident. In particular, enquiries carried out have revealed there were three other vehicles on the road travelling towards Carluke at the time the incident occurred.\n“Officers are appealing for these motorists to contact them as they could have vital information which could assist their enquiries.\n“Anyone with information is asked to contact Road Policing officers at Motherwell Police Office via 101.”", "label": "Yes"}
+{"text": "Global Star Motors (GSM) Corporation, the official dealer of Mercedes-Benz vehicles in Cebu City, launched its biggest Service Caravan this year in select locations in Visayas and Mindanao. The Service Caravan is an exclusive opportunity for all Mercedes-Benz owners in Dumaguete, Bacolod, Iloilo, Bohol, Cagayan De Oro, Davao, General Santos, Dipolog, Zamboanga, Tacloban and Ormoc cities to have their Mercedes cars examined by professionally-trained service advisors and technicians.\nMercedes-Benz Cebu started its Sales and Service Caravan in Western Visayas last January 2021. Following the success of its first leg, the dealership traveled to Bohol and some cities of Mindanao last March and May. And the next leg is scheduled for June 28-30 in Dipolog and Zamboanga.\n“We implemented this Sales and Service Caravan as our way to reach our clients in the Visayas and Mindanao regions. We want to come to you as we always aim to deliver the best or nothing and ensure that our clients continue to rely on us to maintain their Mercedes-Benz vehicles in the best condition” says General Manager of Mercedes-Benz Cebu, Kenneth Huan.\nNever compromise your Mercedes. Our service and genuine parts provide safety and comfort to our customers. With Mercedes-Benz Service Caravan, our team is here to perform first rate maintenance to keep our customers’ Mercedes safe to drive and peace of mind when on the road. That’s because safety has a home with Mercedes-Benz Service.\nThe Sales and Service Caravan of Mercedes-Benz Cebu is set to run until November 2021. Check out their calendar here:", "label": "Yes"}
+{"text": "Brakes are quite possibly the most overlooked system on an ATV or SXS. We take them for granted because they usually work when we squeeze the lever or step on the pedal. But over time, our brakes will lose their feel and performance. Since it happens slowly, we often don’t realize how bad they’re getting. Routine maintenance is very important to proper brake function, and unfortunately, throwing on a new set of pads won’t necessarily restore all of the lost performance. Read on, and we’ll tell you how to make sure you’ll have top performance out of your braking system.\nIt’s easy to think that your brake pads are the most important factor in producing the friction that slows and stops your vehicle. But the fact is that they’re only half of the equation when it comes to the friction surface. The brake rotors are equally as important, if not more so, than the brake pads. They will wear out just like your brake pads, just usually not quite as fast. As they become thinner, they lose their ability to dissipate heat and create the friction necessary for effective braking. Also, it’s tough to see except in extreme situations, but they do not always wear perfectly evenly. In most cases, your brake pads will create a concave wear pattern. Putting new brake pads on a rotor that isn’t flat will result in weak braking every single time. It’ll also create a bad wear pattern on your brand new pads and decrease their lifespan.\nReplacing your rotors with a new set is your only option, as there is no realistic way to properly resurface them. Even if you could, by the time they were machined to a proper surface, they’d be well under the discard specification. We outfitted our classic Honda 250R with a new set of rotors from DP Brakes. Our DP rotors were slightly thicker than stock, and had more effective cooling slots than our stock rotors to keep our braking system cool and powerful.\nOver time, crud and corrosion can build up between the brake caliper and the pistons. There are rubber boots to keep this to a minimum, but let’s face it… we’re driving dirt toys here. The caliper pistons need to be able to float freely in order to transfer hydraulic pressure to the brake pad when the brakes are applied and to back off slightly when the brake is released so there isn’t excessive drag. A slightly stuck piston will often free up when pushed out (applying brakes slightly with the caliper/pads removed) and pushed back in with a pliers or C-clamp. A little bit of silicone lubricant will usually help to free things up. Make sure your brake pistons fully retract into the caliper with a modest amount of pressure. If they don’t, repair or replacement of the caliper may be your only option.\nCALIPER GUIDE PINS\nIn most ATV and SXS applications, a floating caliper is used to compensate for brake wear and any movement in the brake rotor. Your caliper rides on guide pins that have to be clean and lubricated to facilitate that movement as well as to compensate for wear. Just like with the brake pistons, dirt and corrosion will accumulate and keep the caliper slides from moving freely. Remove the caliper pins, clean them thoroughly and apply high quality brake lubricant. Also, make sure the rubber boots are in good shape to keep future crud out of the pins.\nBrake fluid is probably the most overlooked component of a braking system. Brake fluid has many purposes in a braking system. It has to transmit force from the master cylinder piston to the caliper pistons as well as lubricate the internal components, and even help to transfer heat away from your brake caliper pistons. Over time your fluid will become contaminated with wear particles from the braking system, water, and dirt. At this point, it can’t effectively do any of the jobs mentioned and your braking performance suffers. Flushing your old brake fluid out of the system and replacing it with fresh fluid will make a HUGE difference in the feel and performance of your brakes. A little hint: brake fluid is hygroscopic, meaning it will draw moisture from the atmosphere and become fouled with water which can drastically decrease brake fluid longevity and performance. Keep your master cylinder reservoir as well as your brake fluid containers closed at all times that you aren’t filling your reservoir!\nThese four areas are often the difference between a backyard fix and a professional brake job. They can usually be done for a reasonable price or simply a little bit of extra time. With some extra attention to detail, you can have your off-road vehicle stopping like new again -maybe even better.", "label": "Yes"}
+{"text": "2015 BMW X6 M WBAKV610XF0N48105\nBMW X6 M\nOriginal lot name: bmw x6 m50d\nThe auction was\nMarketplace lot id\n2015 BMW X6 M50D with VIN code WBAKV610XF0N48105\nThis BMW X6 M50D is up for auction at a Korean auction site and has an odometer reading of 130410 kilometers. The vehicle has a diesel engine and was first registered on July 9, 2015. The color of the car is gray.\nHowever, the car has some damages. The engine and mission have sustained damage, and there is evidence of small fires. The auction site notes that the car has undergone a vehicle entry meeting and KASA check, providing important information about the car's condition.\nDespite these damages, the vehicle still has a strong performance score expiration system, valid from 2019-10-22 to 2021-10-21.\nThis BMW X6 M50D is a luxury car with premium features. With its VIN code WBAKV610XF0N48105, this car is an excellent choice for those looking for a spacious and powerful vehicle. It has a comfortable and modern interior, and its diesel engine provides excellent fuel economy.\nWith the auction ending on 2021-11-02, this is an excellent opportunity to bid on a high-quality car that is sure to provide an excellent driving experience.\n15 minutes latency\nWe update our information every 15 minutes, so you can be sure that you see the latest information\nWe received information about WBAKV610XF0N48105 directly from the auction, so you can be sure of the accuracy of the data\ncars in our inventory\nWe have collected enough lots so that you have the opportunity to evaluate the market\nThe text is automatically translated from Korean to English, so there may be some inaccuracies in the translation. You can find the original description in the next tab.", "label": "Yes"}
+{"text": "6.5L Diesel Engine\n1. I got a 98 K2500 HD 4x4. I have a low coolant light on my dash. I’m guessing there may be a sensor in the reservoir itself, because the coolant is not low. Can’t find the sensor or part number to replace it.\n2. My turbo is starting to not sound to great. Didn’t know if there is a...", "label": "Yes"}
+{"text": "Date: November 24, 2021\nIf you live in a climate with snow, ice, or even rain, your car needs to be equipped for the conditions. You should have winter tires on all four wheels and make sure they are inflated correctly. If you don’t know how to check tire pressure yourself, ask someone who does.\nYour batteries need to be fully charged before the cold weather hits so that they can produce enough juice to start your engine when it’s really cold outside. Likewise, if you use battery-operated devices like cell phones or laptop computers in the car during winter months, make sure their batteries are fresh too.\nKeep an emergency kit of blankets and hand warmers in your trunk because cars can quickly lose heat once windows fog up from condensation. It’s also a good idea to keep other supplies in your car like windshield washer fluid, an ice scraper, and some extra windshield wiper blades.\nIf you get stuck in the snow while driving, stay calm and remember that other drivers aren't going to stop for you so you have to go slow and remain patient. If someone tries to stop but they can't brake in time, don't turn quickly or slam on the brakes because it will cause a chain reaction of collisions behind you. Keep a safe speed for conditions and drive slowly until help arrives or until conditions improve enough that you can safely pass the car blocking the road.\nHere are some more useful tips:\n1. Keep your gas tank full-- the last thing you want during an emergency is to have to stop at a gas station when it's closed because your tank is running low.\n2. Keep small children in the back seat-- this will keep them safer in case of an accident. Kids should also be wearing their seatbelt while traveling in the car no matter what position they're sitting in (yes, even if they're sitting on your lap).\n3. Have warm clothes-- including gloves, hats, scarves and blankets.\n4. Leave extra time for traveling in the snow-- it takes twice as long to stop when there's snow on the ground! Make sure you leave the house early so you won't be stressed or late getting where you need to go.\n5. Use your mirrors correctly-- It may sound silly, but using them properly can actually help you stay safe while driving during an icy storm. Wait until there's at least five car-lengths between your car and the next before switching lanes or turning off onto another street or highway ramp. Also, don't forget that if one mirror is fogged up , try checking out traffic via the mirror as well as checking both side view mirrors before switching lanes.\nThe snow is coming and it's time to get your car ready. Follow these tips for driving in the snow, and you'll be able to travel safely this winter season: If you are looking for a quality pre-owned vehicle, then visit the Binghamton Auto Exchange at 209 Vestal Parkway West in Vestal, NY or call us today at 607-754-9118.\n209 Vestal Parkway West\nVestal, NY 13850\nSales: (607) 754-9118\nMonday: 9:00am to 5:00pm\nTuesday: 9:00am to 5:00pm\nWednesday: 9:00am to 5:00pm\nThursday: 9:00am to 5:00pm\nFriday: 9:00am to 5:00pm\nSaturday: 1:00pm to 4:00pm\nAfter Hours Available by Appointment", "label": "Yes"}
+{"text": "For detailed information, other images and documents, please select individual articles from the following table.\n938 Injector Intensive Cleaner\nSpecial intensive cleaning agent with ROA² technology for fuel injection systems in diesel engines. Also removes deposits on injectors that cannot be removed using cleaners added to the fuel tank.\nExclusively for trade customers\nRegister now and access more than 400 products\nCleaning can be carried out without having to remove the injectors.\nWhen using the 938 in a 500 ml container with the TUNAP special tool\n13310V2 Injecto Clean. When using the 938 in a 5 l container with the 1353 canister adapter. Refer to SI 938 prior to use!\nFor one passenger vehicle (up to 4 cylinders), 1 can of 938 Injector Intensive Cleaning Diesel is required. 6 cylinder and 8 cylinder engines require 2 cans. 10-12 cylinder engines require 3 cans.\nSelect RAL-colour code\n!! NOTE: On-screen visualisation of the colour differs from real colour shade!!", "label": "Yes"}
+{"text": "CarsFast Car Loans\nInterest rates from 4.9%\n- Thousands of vehicles\n- Multiple financing options\n- Pre-approval in 60 seconds\n- Vehicle delivery to your door\nFinder is committed to editorial independence. While we receive compensation when you click links to partners, they do not influence our content.\nOut of nearly 60 car brands that sell in Canada, Subaru ranks among the top 15. Just south of the border, USA Today reported that Subaru ranks number three in customer satisfaction among car manufacturers. If you’re interested in buying one of these mid-range cars, you have a few financing options to consider. Though Subaru is pricier than some of the competition, its vehicles come with a solid warranty and you could even score a special rate discount.\nYou can finance your Subaru a few ways: a car loan, manufacturer financing or a personal loan. A car loan is generally the least expensive option. Not only will you be taking out a secured loan, which typically has lower rates than an unsecured (no collateral) personal loan, but you’ll also cut out the middleman. This means no tacked-on interest to cover the dealership’s costs.\nHowever, getting a car loan may not be your quickest option. To find the best deal, you’ll have to compare rates from different online lenders, banks and credit unions. If you’re pressed for time, you may want to get a loan directly through Subaru Financial Services, which is funded by Toyota Credit Canada Inc. (TCCI). You can apply for financing when you pick out your car, and then drive off the lot the same day — no waiting period is required.\nLayla, a resident of Saskatchewan, recently graduated with her undergraduate degree and plans to complete a Master’s program at a university an hour away from where she lives. Knowing she’ll have a lengthy commute – sometimes in bad weather – Layla hunts around for a safe and sturdy vehicle, eventually landing on a 2020 Subaru Forester at a nearby dealership. She decides to buy the SUV, priced at $30,800.00, and makes a 20% down payment of $6,160.00.\nLayla applies for dealership financing to cover the remaining $24,640.00. Thanks to her solid credit history, she is approved for a loan to cover this amount plus 6% PST. Layla is also charged a mandatory registration and insurance fee of $1,160.00/year (about $100.00/month) by Saskatchewan Government Insurance (SGI). This fee factors in a discount of almost $260.00 due to Layla’s high safety rating, which she earned over 10+ years of being a great driver with no incidents, suspensions or collisions.\n|Cost of new car||$30,800.00|\n|Loan type||Auto loan (term loan)|\n|Interest rate (APR)||5.90%|\n|Loan term||5 years|\n|Additional fees||4.00% origination fee ($1,059.52)|\n|Payment||$510.86 monthly or $235.51 biweekly|\n|Total loan cost||$30,651.60 with monthly payments or $30,616.30 with biweekly payments|\n*The information in this example, including rates, fees and terms, is provided as a representative transaction. The actual cost of the product may vary depending on the retailer, the product specs and other factors.\nSubaru offers a 1% Loyalty Bonus interest rate reduction for returning customers who take advantage of any of the company’s special offers. This discount applies to both financing and leasing agreements. Additionally, customers in the following categories can get a $750 rebate on their vehicle purchases:\nLooking at the manufacturer suggested retail prices (MSRPs) of some of the models you’re interested in can give you an idea of how much you’ll need to borrow. However, the actual cost of your new Subaru will depend on your negotiating skills, where you live and any special promotions you qualify for.\n|2019 model||Starting MSRP||Body||City/highway MPG|\nSubaru also offers the following limited warranties:\nIn order to not be charged for these repairs, you need to bring your car to an authorized Subaru retailer in Canada.\nAlthough Subarus can be a bit pricier than the competition, you may qualify for one of the brand’s special buyer programs to help bring the cost down. And if you’re buying a Certified Pre-owned car directly through Subaru, you may be able to find a car that’s still under warranty. Financing directly through Subaru Financial Services may be your fastest option, but you could likely find a more competitive rate by comparing car loans from banks and online lenders first.\nLearn more about how they work and compare your options with our guide to car loans.\nDo you need a car loan but you don’t have the best credit? Canada Auto Finance connects you with local dealers to help you secure auto financing at competitive rates to help you buy a car.\nUse our our helpful guide to compare the cheapest and most expensive cars to insure.\nFind out more about what you’ll need to do to transfer a car loan to another person in Canada.\nLearn whether in-house financing is a good choice for you and find out what your alternatives are if you’d prefer a different type of car loan.\nFind out how you can get the money you need to purchase a new vehicle with a second chance car loan.\nFind out more about what you’ll need to do to take over a car lease in Canada.\nProtect your luxury car with a customized policy that offers higher coverage options and special perks.\nCompare car insurance coverage options for sports cars and rates for popular models.\nFind out everything you need to know about full-coverage car insurance in our comprehensive guide.\nSee a list of over 30 automakers that sell vehicles in Canada. Plus, learn what makes them unique and what their most popular models are.\nfinder.com is an independent comparison platform and information service that aims to provide you with the tools you need to make better decisions. While we are independent, the offers that appear on this site are from companies from which finder.com receives compensation. We may receive compensation from our partners for placement of their products or services. We may also receive compensation if you click on certain links posted on our site. While compensation arrangements may affect the order, position or placement of product information, it doesn't influence our assessment of those products. Please don't interpret the order in which products appear on our Site as any endorsement or recommendation from us. finder.com compares a wide range of products, providers and services but we don't provide information on all available products, providers or services. Please appreciate that there may be other options available to you than the products, providers or services covered by our service.", "label": "Yes"}
+{"text": "Electric Motorcycle Motor, Electric Motorcycle Hub Motor ...\nHow to Build an Electric Motorcycle By: Stryker at Instructables : Filed Under: Electric Motorcycles Step 1. I only work 3 miles from home but with gas prices getting out of control, I thought it would be great to have an electric motorcycle.I've always wanted an electric motorcycle and decided that doing an electric motorcycle conversion with an electric motorcycle motor would be a good ...\nsuzuki gs450 bobber wiring diagram Gallery\nsuzuki gs450 bobber wiring diagram suzuki gn400 wiring diagram wiring diagram\n1981 suzuki gs650 wiring diagram 1981 suzuki gs750e wiring diagram\nwiring diagram suzuki thunder 125\nwiring harness 1980 suzuki gs 450l 34 wiring diagram images", "label": "Yes"}
+{"text": "What Do Your Tires Do? Your tires are an important component of your vehicle, making it vital that you have a tire repair service shop you can rely upon. But do you really understand what it is that your tires and wheels do? Yes, they serve as the point of contact between your vehicle and the road, but they are also what propels your vehicle down it. Your engine supplies the power, yet how much is needed depends upon the resistive force generated between your tire and the road surface as well as the weight of your vehicle. To drive, your engine must produce enough power to overcome this friction. That power is manifested in the rotational force of your wheels, which then uses the tires to apply it to the road surface. To learn more about how tires work, visit Meineke #1701 in East Brunswick, NJ.\nKnow the Importance of Your Tires\nTires are arguably one of the most important parts of any vehicle. This is because they are what helps your car or truck cling to the road and have enough traction to safely operate. Your car only accelerates, turns and stops because your tires allow it to. Tires also play an important role in gas mileage. When they are improperly inflated they lose fuel efficiency and you end up paying more at the pump. At Meineke #1701 in East Brunswick, NJ, we service cars while and act as a tire repair shop. Contact us for tire change service for all your vehicles.\nSigns of Wear and Tear\n\"My tires seem a bit worn down, should I find a flat tire repair shop near me?\" This is a frequently asked question, but there is no universal answer. However, there are easily observable signs that your tires may need to be replaced or repaired. For example, if your tire pressure reading is consistently low, even after replacement or inflation, you may want to consider tire pressure sensor replacement. Loss of tread, poor vehicle handling, and visible punctures are also common signs of wear and tear. Stop by East Brunswick NJ Meineke #1701 to speak with a tire repair professional.\nConsequences of Poor Maintenance\nNeglecting to inspect or replace your tires can be dangerous in the long-run. If your tires are worn down, you may have difficulties handling your vehicle during adverse weather. Sleet, rain, and ice can easily send a vehicle with little tread spinning. During rainstorms, your vehicle will be more susceptible to hydroplaning, and you may experience longer stopping times and distances. Both of these issues have the potential to cause severe injury to drivers and passengers. Naturally, we want to help you avoid such situations. Contact our East Brunswick, NJ, and Meineke #1701 to schedule a professional inspection of your tires.\nIs it Time for New Tires?\nMany of our customers ask themselves, \"When should I visit a tire repair shop near me?\" The answer depends on the age and current condition of your tires, your personal driving habits, and the condition of your local roadways. Individuals who drive on poorly paved and broken roadways will have to replace their tires earlier than most drivers. If you drive long distances at relatively high speeds, you may need to have your tires inspected once or twice yearly. If your tires are over ten-years-old, it is definitely time to consider a replacement. Get in touch with our East Brunswick, NJ, Meineke #1701 store if you have specific questions.\nExceptional Service at Affordable Prices\nAt Meineke, we understand that you may be concerned about tire rotation or tire repair cost. If you are, we offer a variety of tire rotation coupons that can help you save on these services. Our professionals always provide quality service. If you believe that your tires are old or damaged, don't hesitate to contact one of our professionals at the East Brunswick NJ Meineke #1701 today.", "label": "Yes"}
+{"text": "Sorry, we didn't find any results in your area but did find 1 ad in surrounding suburbs.\nTesla Model S 85D\n- 10780 km\nHardly driven and immaculate car. Only 10,780 kms and used for local driving only. One owner. If you like an easy lifestyle without the hassle of filling up this is for you. Still under new factory warranty until December 2019. Battery and drive unit unlimited km warranty. Never been in an accident. Car of the Year. Free supercharging for the life of the car. Full service history. $129,000 ono. Private seller. Road worthy certificate. Still in warranty period. Warranty till Dec 2019 or 80,0", "label": "Yes"}
+{"text": "Motor vehicle shopping once were uncomplicated. Dealerships publicised in local forms, even and web pages yellow pages for individuals to choose from. Most customers honest these resources and purchased your car they were interested in. At present, people are starting to be a little bit more distrustful. With additional fuel selling prices, rising costs of the stuff and raising work, will it be truly worth the hassle of traveling all over city to visit a certain car dealership? What must a person look for when considering car purchasing?\nIf you beloved this article and you would like to get much more facts regarding JL tire carrier kindly go to our web site.\nEven though there are various benefits to the purchase of a car in the dealer, additionally, there are many negative aspects to be considered ahead of purchasing a vehicle. While a good many individuals believe that addressing neighborhood traders will keep them much more accustomed to the automobiles they would like to, most customers learn by online research that dealers typically are not able to supply very clear, brief info. Shoppers who definitely are browsing in a car lot but have queries about their current brand name generally get in touch with the casino dealer to ask more details.\nA “glowing blue ebook” expense is certainly not an accurate portrayal of the actual valuation on an automobile. On top of that, numerous web sites providing automobile purchasing do not give the up-to-dateprices for many motor vehicles. A “pink ebook” cost may only represent predicted prices. It is very important be aware of serious valuation of an auto previous to acquiring it.\nSomething facing motor vehicle searching is always that car dealerships typically reduce car-obtaining possibilities, because of this. A lot of traders just offer some models for take specific models. This not merely will make it hard for consumers to seek out what they re in search of but sometimes also placed the customer at risk for the need to buy a car that is definitely tremendously within-valued. This kind of prices problem can be averted by after a in depth look online. Several individuals claim that they observed improved promotions on the internet than by means of local sellers.\nOn the internet automotive brokerage service web sites do not have restrictions on the way cars and trucks are supplied and do not require any minimum amount specifications for your pay for. On the other hand, an agreement will regularly need a minimum amount credit score or a down payment. Shoppers can stay away from these sorts of charges when shopping using an aius use website. Given that car dealerships often inflatable automobile prices to draw in much more consumers, consumers could also save cash if you are paying a lesser amount of to get a car. Customers can stay clear of dealership motor vehicle charges problems such as over-the prices or below-costs,. That is certainly because a dealership will only have a handful of styles, consumers can simply find a vehicle within their finances.\nOne of the biggest great things about purchasing utilizing an aius use web site. Reputable web pages will provide correct motor vehicle costs data. These records arrives straight from market places, which make sure it’s as correct as you can. Nevertheless there is no primary outcomes of the car dealer and also the internet site, because of this there isn’t any probability the fact that prices are purposefully inaccurate.\nCar shopping is often rather time consuming, primarily achievable consumers. That is why by using a web site that can offer precise design information and facts are imperative to saving money. Utilizing exact charges info, buyers can easily examine distinct cars. Because choosing a automobile must be something of careful homework, having an aius can help have the whole procedure easier and more value-successful.\nUsing the web and all sorts of know-how out there, it is easy to uncover whatever you fancy. Motor vehicle shopping is not any exclusion. No matter if you would like a Honda or simply a Rolls royce, they allow this on line with the mouse click on the mouse. And some persons even now prefer to frequent a dealership, there are thousands who’re now after switching. By enjoying the advantages that most world wide web suppliers give, automobile consumers can save cash and time with fun shopping for the right motor vehicle.\nIf you enjoyed this post and you would like to obtain additional information relating to JL Tire Carrier Https://Cavfab.Com kindly see our own internet site.\nHad you been interested in the material of this article, here are a few a lot more pages of content with similar written content:", "label": "Yes"}
+{"text": "Welcome to Hamilton GM Country - Chevrolet Dealers Clovis\nHamilton GM Country has been serving the Clovis and Portales New Mexico area for nearly 20 years and we are proud to be a part of this hard working community. The way we do business at Hamilton is a tip of the cap to the way it was always done. We believe in an easy and no hassle approach to customer service and still subscribe to the idea that a handshake means something. The Hamilton GM Country store offers a huge supply of vehicles desired by GM customers in the New Mexico and West Texas area including Cadillac and Chevrolet passenger vehicles as well as a variety of used cars and trucks, many for sale under $10,000. If it’s a Certified Pre Owned vehicle you are searching for we offer an impressive selection of Certified Pre Owned cars and trucks for immediate delivery.\nAt Hamilton GM Country we also have an amazing variety of trucks ordered and stocked with consideration for the variety of businesses that make their home in the Clovis Portales area. Hamilton GM Country believes you should find what you want and, when you find it, you should be able to make a deal the old fashioned way and feel good about it when you take you vehicle home or to your job site.\nHamilton GM Happily Serves:\nHamilton GM Service\nThe service department is poised to offer affordable and quality service for all GM makes in the Portales and Clovis areas. Our technicians are certified to work on all GM brands.\nBe sure to check our service specials page for ongoing deals. We want you to save money while maintaining your vehicle.", "label": "Yes"}
+{"text": "In hopes of continuing its sales momentum in the U.S.\nRead This Article\nSubaru has introduced eight new videos showcasing some of the features that make up its vehicles, including the flat-4 \"boxer\" engine, Subaru's Symmetrical All-Wheel Drive, and X-Mode, among others.\nOn the latest episode of Head2Head, our colleagues over at Motor Trend pit the newest Ford Mustang against the all-new, much-hyped 2013 Subaru BRZ.\nSubaru is calling back 295,123 Imprezas and Foresters to replace the lower wiper control arm.", "label": "Yes"}
+{"text": "Your privacy is important to us.\nFor many of our Columbus, Lancaster, Groveport and Hilliard area customers, the process of financing or leasing a new or used car, truck or SUV, can feel quite frustrating. That's why, here at Ricart Nissan, our team is committed to helping each of our customers secure an auto loan that won't break the bank. To learn more, we encourage you to read on below...\nFlexible Leasing Programs that Fit Within Your Needs: We understand that the daily driving needs of our customers vary greatly. That's why our team members are proud to offer Columbus, Lancaster, Groveport and Hilliard area car shoppers the opportunity to customize a leasing program that fits within their needs.\nFinancing that Keeps Your Wallet in Mind: While you might think that financing a new or used Nissan would make for a costly monthly expense, that's not necessarily true for many of our customers. If you have your heart set on financing your next vehicle, you can rely on our finance team to get you a competitive interest rate that'll help you get the most out of your purchase.\nA Stress-Free Application Process: For many of our Columbus, Lancaster, Groveport and Hilliard area customers, the process of applying for financing can seem daunting. That's why, here at Ricart Nissan, we've made the application process as easy as can be. How? By allowing our customers the opportunity to apply for financing online.\nIf you would like to learn more about what the team in our Finance Center can do for you, we invite you to stop by our showroom to speak with a member of our team. Conveniently located in Groveport, OH our team looks forward to helping you navigate the path to car ownership with absolute ease.", "label": "Yes"}
+{"text": "The City of Vancouver has been provided with a $386,000 grant to build capacity and study the potential future of connected and automated vehicles.\nIn a release from the federal government’s Transport Canada ministry, the funding will go towards the study of the fleets of fire rescue, police, Park Board, and the general City fleets. It will explore how self-driving vehicles and connected vehicles can integrate into the transportation network to improve safety and reduce congestion, all the while completely operating on renewable energy.\n“Connected and automated vehicle technology has immense potential and will have a tremendous impact on our transportation system,” said Marc Garneau, Minister of Transport.\n“This funding will help our stakeholders improve their understanding of connected and automated vehicle technologies, and how to safely and securely integrate them into our road system in order to capture their many benefits.”\nTransport Canada has set aside a total of $2.9 million to help Canadian jurisdictions prepare for connected and automated vehicles. As well, it is working with other national governments through the United Nations to create guidelines and regulatory requirements that facilitate innovation and aid the safe creation of automated vehicle features.\nBoth the municipal governments of Vancouver and Surrey are also finalists for their joint proposal to construct corridors for autonomous vehicles in their jurisdictions. The federal government’s Smart Cities Challenge will award a single top prize of $50 million to the winning innovative proposal by spring 2019.\n- Vancouver and Surrey shortlisted for funding to build driverless car roads\n- EV chargers required for all parking stalls in new Vancouver residential buildings starting in 2019\n- Here’s what the Vancouver PD’s new electric ghost cars look like (VIDEO)\n- Vancouver startup launches velomobile-sharing service at UBC\n- Calgary could see driverless vehicles in 2018\n- Toronto Uber opening up its own branch of AI research", "label": "Yes"}
+{"text": "Where to Buy Firestone WeatherGrip Tires in Oro Valley, AZ\nNext-level weather traction and control for a consistent ride across Arizona, mile after mile. That's Firestone WeatherGrip. It's engineered for better wet handling and ride comfort to help keep you in control in a range of weather. Find Firestone WeatherGrip tires in Oro Valley, AZ today.\nFirestone WeatherGrip Tires Equip You for Any Forecast in Oro Valley, AZ\nDo you live in a place with heavy rain and piles of snow that melt to slush pretty quickly? Have you ever lacked the traction you needed for the season and had to install snow chains? If so, it might be time to visit a local Arizona tire dealer that offers Firestone WeatherGrip tires in Oro Valley. The Firestone WeatherGrip tire has special All-Weather features. It's made to help you maintain control of your vehicle when driving in snow or on wet roads. While this advantage sounds similar to All-Season tires, the Firestone WeatherGrip stands above when it comes to winter handling. The rubber in Firestone WeatherGrip tires is designed to stay flexible in near-freezing temperatures, while the rubber in All-Season tires won't. It will get brittle and hard in the cold. What happens when tires get stiff? Traction and grip can lessen if your vehicle only has All-Season tires and temperatures get frigid. What's more, Firestone WeatherGrip tires have the 3-Peak Mountain Snowflake certification. A 3-Peak certification means that the tire has been tested to reliably perform in mild to severe snow conditions. So, don't think twice — you can hit the slopes with these tires!\nIt's Time to Trek with WeatherGrip Tires — Shop WeatherGrip in Oro Valley\nVisit a Firestone tire dealer in Oro Valley to find WeatherGrip tires for your vehicle. Firestone WeatherGrip tires are made to give you next-level weather traction, no matter what the condition. What makes it possible? Open, wide shoulder slots help divert water away from the tire for safer driving and reduced risk of hydroplaning. Deep grooves help with advanced water evacuation as well. Interlaced sipes offer heightened snow traction and encourage even tire wear for longer lasting tires.\nNot sure if there's a Firestone WeatherGrip tire in Oro Valley to fit your vehicle? There's a Firestone WeatherGrip tire made for most cars, CUVs and minivans. Check your tire fit on FirestoneTire.com or ask your nearest Oro Valley Firestone tire dealer. Thanks to Firestone's 90-Day Buy and Try Guarantee, you can take Firestone tires for a spin — worry-free! If by chance you're not a fan of your eligible Firestone-brand tires, you can take them back to the store where you first purchased them within 90 days of purchase and exchange them or get a full refund.* Now's the time! Get ready to command the road — rain, snow and shine — with help from Firestone WeatherGrip tires.\n*Certain limitations and restrictions apply. See warranty manual for details.", "label": "Yes"}
+{"text": "INCREDIBLE GOLD CAMARO- CENTRAL FLORIDA SERIES\nI headed out to Tampa Bay on a Thursday to visit a few shops and while\nthere I dropped by 813 Customs. Randy from Riding Clean was there, and we\nall got a sneak peak at this whip before anyone else. My bad I didn't get\nany interior shots for this clip, that's because I couldn't get close to\nit. There was a large crowd around it the whole time. The interior is my\nfavorite part. The exterior wasn't really my thing, however seeing it in\nthis clip makes me appreciate the hard work that went into it. It does look\nLamborghini Reventon Replica\nWe are proud to present to you the Turnkey Lamborghini Reventon Replica.\nThis Vehicle will prove to be the most astonishing and authentic replica on\nthe road. with either a Porsche Boxster or Toyota MR2 donor car we can\nbuild this exciting supercar replica like no other. You can now own your\nown Lamborghini Reventon and we are sure you will enjoy!.\nToyota Tundra Laying body on 24\"s\nGrinderTV Presents Joel's Toyota Tundra bagged and bodied on 24\"s from\nXtreme Lowz Riverside, California Please subscribe and rate video to show\nyour support! Thanks!\nSong is \"Anno Domini Beats - Lost (Feat. Hard Target & Lisa Gallo)\"\nUltimate '67 Chevy Nova HOT Rod 1000HP+\nThis is the baddest muscle Nova I've ever seen. 160,000 spent. 632 c.i.d.\n1000HP on motor, Nitrous, transbrake,\nbest of the best. Remember to deploy the parachute when you run 160+mph in\nthe quarter mile. 8 Second Nova.\nRYNO Motors Full Story\nThis is a great story on the early days of RYNO Motors. See our latest\ncreation pre-production show bike at our web-site and pre-order at\nhttp://rynomotors.com/store and don't forget to buy a Tee Shirt:\nCandy Green 73 Caprice Donk Vert on 30\" Asantis Pt.1 - 1080p HD\nHad to say, this 1973 Chevrolet Caprice Donk Convertible on Asanti 30's was\nLOVELY!!! Even did a burn out on the 30's. Kandy green, had a 454 (or some\nkinda crazy motor lol) big block motor with a breather coming thru the\nhood, chrome front, trunk beating like crazy, interior fully done, sitting\nright and it had the top down. Cant beat that AT ALL!! And homie was cool.\nIn Orlando for Florida Classic 2011.\nTurbospoke - The Bicycle Exhaust System\nBuy here: http://www.speedwaymotors.com/turbospoke,50683.html\nturbospoke is a complete Exhaust system that fits to any bike and makes\nit look and sound just like a real dirt bike. turbospoke is based on the old\n'baseball-card-in-the-spokes' concept, brought right up to date. The\nrealistic engine sounds are created using long lasting plastic cards, a\nclever sound chamber and an awesome megaphone Exhaust pipe which really amplifies the sound.", "label": "Yes"}
+{"text": "Handbrake and brake problem!!\nCame out this morning in the ice cold to go to work..defrosted me car..went to move..STUCK!!!\nFor some reason my brakes have locked on..my footbrake seems to be quite hard and theres no tension at all on the handbrake..not much of a mechanic meself so could any have a pop at what this could be and how to solve it?\nI love me car and would idelly like it to move lol.\nIs there any chance a spring or something could have frozen..the brakes were fine yest but locked on this morn..left it running a bit this morn to see if it would defrost but no joy..help!!\nLast edited by kevvy b; 21-12-07 at 08:11.", "label": "Yes"}
+{"text": "GoDaddy Racing has unveiled its brand new livery for the 2014 NASCAR Sprint Cup season. The new predominantly green paint scheme will be showcased on Danica Patrick’s no.10 Chevrolet SS.\nThe changes are minimal compared to last year’s livery, except for a the large orange stripe running down the middle of the car. Danica Patrick will be competing for Steward-Haas Racing next year, alongside Kevin Harvick, Tony Stewart and Kurt Busch.\nThe 31-year-old driver scored a 27th overall finish last season, with only one top 10 result and one pole position in 36 events. Danica made her Sprint Cup debut in 2012, when she ran a limited schedule for Stewart-Haas Racing, which makes 2013 her best top tier NASCAR result yet.\nThe 2014 NASCAR Sprint Cup season will commence on February 2014, when the Daytona 500 at the Daytona International Speedway is scheduled to take place.", "label": "Yes"}
+{"text": "Classic VW parts and accessories for your classic Air-Cooled Volkswagen Beetle, Ghia, Bus, Super Beetle or Vanagon. Mid America Motorworks helps vintage VW owners restore their classic cars with high quality classic VW parts for the older Air-Cooled vehicles including the classic Volkswagen parts for the Beetle, SuperBeetle, Bus, Vanagon and Karmann Ghia. Classic VW Parts for Every Part of your Ride. Whether you need niche interior parts for classic VW engine repair or you're looking for stylish cosmetic upgrades, we have it all. Chirco Performance has been in the Volkswagen parts and repair industry for over 35 years. YNZ Yesterdays Parts 333 E. Stuart Ave. Unit A Redlands,CA 92374 909.798.1498 www.ynzyesterdaysparts.com Antique and classic car wiring harnesses vw products; featured vw parts; vw front end; vw vintage speed; vw super lowering kits; vw brakes; vw rear suspension; vw misc; vw tools; vw engine; vw cables; usa made items! garage sale! dr. v-dub; topline racing; events; faq; gallery; about us; contact\nWe now link to dozens of site that will supply your racing and customizing parts. You’ll find it all in the Race and Performance Parts section . Need work done on your ride check out the list of shops in our Classic & Custom Restoration Shops Section or if you need something special or cool check the folks in the Resource Section Genuine VW Accessories are the perfect match for you and your VW. Shop online at the official Volkswagen Accessories online store and make a personal statement—both on and off the road. - WHEN ORDERING FROM A RETAILER ASK FOR MARK V FIBERGLASS PRODUCTS. The Vehicles/Painted Parts Shown In Photographs Were Taken With Permission From The Owners For The Use On This Website. Photographs Are Used On This Website For Illustrative/Reference Purposes Only. Auto glass and Truck glass parts for most classic, vintage and antique autos and trucks from the 20's to the 70's. If you have a kit car, custom chop or can't find what you need, call us at (530) 626-6923. Classic VW Parts for Every Part of your Ride. Whether you need niche interior parts for classic VW engine repair or you're looking for stylish cosmetic upgrades, we have it all. Chirco Performance has been in the Volkswagen parts and repair industry for over 35 years. Get a 15% Rebate by Mail* on Select Volkswagen Accessories. Get a 15% rebate by mail via a Volkswagen Visa®️ Prepaid Card** up to ($300) when you purchase select Volkswagen Accessories between 07.01.19 and 09.30.19. Allow 8–10 weeks for delivery of Visa Prepaid Card.\nParts and Accessories for Volkswagen EuroVan. We offer Tents, Awnings, Seat Swivel Bases, Dash Consoles, Bras, Hitches, Tires, Shocks, Exhaust, Filters, Mudflaps ... We now link to dozens of site that will supply your racing and customizing parts. You’ll find it all in the Race and Performance Parts section . Need work done on your ride check out the list of shops in our Classic & Custom Restoration Shops Section or if you need something special or cool check the folks in the Resource Section The hot Volkswagen Touareg R SUV combines a 3.0-litre turbocharged V6 with a 134bhp electric motorThis is the new Volkswagen Touareg R. The most potent version of the firm’s flagship SUV packs a 456bhp plug-in hybrid powertrain capable of returning CO2 emissions of around 44g/km, says VW. Accessories. Ample selection of interior accessories and parts available for the classic Volkswagen T1 Beetle at JK. Interesting listings for Kafers and Bugs comprise shifters, window blinds, billet aluminum trim and gear lever knobs… Scroll down for full listings or search for VW T1 Beetle interior accessory parts using the search box at...\nBest prices on Classic vw beetle parts in Automotive Parts online. Visit Bizrate to find the best deals on top brands. Read reviews on Automotive merchants and buy with confidence.\nVolkswagen Classic Parts - eine Produktlinie des Volkswagen Konzerns Data privacy: Web-Analysis & Cookies Please allow us to do Web Analysis and Remarketing.\nVolkswagen Original Accessories are built to the highest standards—just like your Volkswagen. Shop accessories for comfort, fun, function, and versatility, all designed alongside your VW, so there’s no worry about the incompatibility you can expect with retrofitting and modifications. Classic VW Parts & Air Suspension for AirCooled VolkswagenClassic VW Parts & Air Suspension for AirCooled Volkswagen for Beetle, Bus, Ghia, Type 181 & Type 3. Bolt in Air Ride Solutions.\nCan i view blink on my tv\nVolkswagen Beetle parts and accessories- Buy online from our largest collection of custom car parts at affordable rates. ... was available on the classic Bug. A ...\nThese cool accessories are designed to keep that OE vintage Volkswagen look with out breaking your Volkswagen wallet! Our aircooled vintage VW product team searches the world high & low for hard to find VW parts and accessories for the Volkswagen aficionado! Many parts are limited in supply or no longer available. TMI Products - TMI Interiors Manufactures Interiors for Mustang, Bronco, Camaro, Chevelle and Volkswagen automotive restoration upholstery and interior. TMI Renew Restore Replace your car interior with TMI Performance Interiors.\nIf you're a VW owner and looking to maintain, repair or upgrade your car, van or SUV, Europa Parts is your source for OEM Volkswagen parts. More than just an online retailer, we're a group of automotive fans that are proud to offer the best selection of VW OEM and genuine parts online. Classic VW Parts & Accessories Store. Click on a Category or Subcategory to view awesome classic VW replacement parts, VW performance parts, and VW accessories.\nKiss in spiderman\nBusDepot.com is home to the world’s largest online catalog of replacement parts for Volkswagens. Including thousands of VW Bus, Camper, Vanagon, and Eurovan parts that you cannot find anywhere else – plus parts for every VW car as well. Nearly 200,000 parts, all at up to 70% off, everyday on every part! Search. Click. Result. You can now quickly and easily find selected genuine parts for your classic car using the Porsche Classic Parts Explorer. Regardless of whether you search by model, type or model year, you can discover genuine parts and spare parts for the relevant classic car in just a few clicks. VW Classic parts, the department 'parts for old cars' of Volkswagen is located in Wolfsburg, in Germany. That real company in the company is in charge of managing the huge stocks of parts destinated to vehicles which are over 15 years. All of the stocks of old vehicles parts of that car brand are kept by this way, preserved and managed in an ... For 35 years West Coast Metric has offered superb quality Classic VW Parts for VW Bug, VW Bus, VW Beetle, Karmann Ghia, Super Beetle, Vanagon, Type 3 & Thing. VW parts - Bug parts or bus parts - Volkswagen parts for your VW bug or VW bus.\nAIRCOOLED Replacement parts and accessories for classic VW Beetle, campervan bus models, old school beetle parts, lights, clips, vents, knobs, mats, pins, mudflaps, floorpans, mesh, bumpers, lamps, mirrors etc etcPorsche style grille covers for headlights, roofracks, window frames, rubbers, seat frames, switches, engine spares etc etcBumper lamps, beadings, rubbers and much moreparts can fit on Ka... VW Camper Parts and Vintage Coolers for sale + Vintage camping gear, original Bus parts, restoration tips and tricks, 500+ tagged pictures\nWelcome to VW Beetle And Campers Parts Specialists Just Aircooled UK's top supplier of classic VW Parts. Justaircooled has every part or spare you need for your Classic Aircooled Bug and Bus. We have new accessories for sale online for the VW Beetle, Baja, Buggy, Trike and Karmann Ghia. Looking for used Volkswagen Classic Beetle cars? Find your ideal second hand used Volkswagen Classic Beetle cars from top dealers and private sellers in your area with PistonHeads Classifieds. VW Beetle and Classic Volkswagen (Golf GTI, Scirocco Mk1, Karmann Ghia, Corrado...) parts, books and models, ©beetlemania.net 2000-2011 All trademarks are the property of their respective owners, and are shown on this Web-Site for recognition and identification purposes only.\n“YNZ Yesterdays Parts 333 E. Stuart Ave. Unit A Redlands,CA 92374 909.798.1498 www.ynzyesterdaysparts.com Antique and classic car wiring harnesses Get the best deals on Volkswagen Vintage Car and Truck Parts when you shop the largest online selection ... Vintage and Classic Car & Truck Parts; Volkswagen Vintage ... Great gifts & accessories for Volkswagen VW enthusiasts at All Things Vdub! Our unique VW gear includes T-shirts, hats, mugs, decals & stickers, clocks and more\nVolkswagen Parts and Accessories Phone: 478-955-6082 or 478-825-0438 Check us out at our facility right off of Interstate 75 at exit 146. 181 Peach Wood Drive, Byron, GA 31008 We carry door panels,...\nHow to open sketch file in browser\nMtr2000 fanClassic Volkswagen is listed under the Orlando Auto Parts category and is located in 5474 South Orange Blossom Trail, Orlando, FL. It can be reached at phone number (407)581-4321. corvair parts, worlds largest corvair parts supplier for 1960 thru 1969 monza, spyder, corsa model cars and more. Riviera upholstery. Covina, California's #1 Source For Classic Air-Cooled VW Bug, Super Beetle, Bus, Transporter, Type 2, Karmann Ghia, Type 3, Thing, Hot Rod Parts. Serving Los Angeles ... VW Parts, Bug, Ghia, Type3, Classic Volkswagen Parts, VW Bug Parts and VW Bus Parts, IPC Get your Volkswagen info and parts here. VW Parts, how to get your vw parts.\nVW Longblock Parts, Cranks, Rods, Cylinder Heads, Push Rods, Camshaft, Lifters, Flywheel, Piston Kits, Rocker Arms, Cam Gear, Oil Pump, Full Flow Etc... Over 1,100 Volkswagen Beetle Parts and Accessories available at Just Kampers. Officially called the Volkswagen Type 1 the VW Beetle entered mainstream production in 1945 with assembly continuing until 2003. The Beetle Cabriolet first entered production with Karmann in 1949. We have been providing Volkswagen (VW) restorers with parts for their classic Beetle, Karmann Ghia, VW Bus, Volkswagen Vanagon, VW Rabbit, VW Cabriolet, VW Thing and Volkswagen Type 3 since 1975. We have nearly forty years in the Volkswagen restoration business! Volkswagen Classic Cars for sale, including the Beetle and 181 (Thing), are here at OldCarOnline.com. Our sellers have all of the years and models of vintage Volkswagen cars, in every condition. From the first models in 1935 to more recent Volkswagen cars such as the iconic 1984 Rabbit, you can find the Volkswagen Collectors car you've been ...\nJul 17, 2019 · But there's another company doing its part to bring the VW Bus back to life in the 21st century—meet Classic Steel Body, an Ohio outfit that will sell you a brand new body shell for rear-engined ... The hot Volkswagen Touareg R SUV combines a 3.0-litre turbocharged V6 with a 134bhp electric motorThis is the new Volkswagen Touareg R. The most potent version of the firm’s flagship SUV packs a 456bhp plug-in hybrid powertrain capable of returning CO2 emissions of around 44g/km, says VW.\nMoore Parts is your #1 source for classic VW parts. We offer a wide range of sand rail, UTV and dune buggy parts & accessories. Free US shipping site-wide. Shop | Classic Volkswagen Parts, Vintage VW Parts, Air Cooled Shop One Year Only Parts for the ’67 VW Beetle These are the One Year Only parts we carry for the ’67 Beetle over at Lane Russell .\nClassic-vw.co.uk is a trading name of mpm worldwide ltd. We are in no way affiliated with volkswagen AG. All part numbers shown are for identification purpose. 200 Million used auto parts instantly searchable. Shop our large selection of parts based on brand, price, description, and location. Order the part with stock number in hand.", "label": "Yes"}
+{"text": "Our average rating from our customers is\nNaRead More >>\nOutstanding service.Read More >>\nWith all the other customers ahead of me, my oil change was finished quite fast.Read More >>\nCOMMERCE TWP, MI\nsteve was great as usual. he should get a raise.Read More >>\nGreat experience, everything was perfect.Read More >>\nYou all did a tremendous job. The service was fast and high quality. I was told that it may take one to two days and I received a call that my car was finished in 3-4 hours. I would definitely returnRead More >>\nAs usual our experience was the best!! Tim Weir made our experience easy and enjoyable. He takes his time and never pressures you. He explains things as he goes and handles things so that we don't havRead More >>\nI always have a good experience at your dealership. Love your new waiting area and you always have coffee. My old Yukon gets great care by your mechanics and I rely on the longevity of having OEM parRead More >>\nA very nice experience. Thank you.Read More >>\nAs agreed.Read More >>\nANN ARBOR, MI\nBob Jeannotte Buick GMC in Plymouth, Near Canton, MI\nAs the preferred new and used car and truck dealer in Plymouth, near Canton, MI, Bob Jeannotte Buick GMC would like to welcome you. Whether you’re researching Buick cars and crossovers, GMC trucks and SUVs, used vehicles, financing options, or are looking for a reliable service and parts department, our Buick and GMC dealership has you covered. We are located just two minutes east of downtown, at 949 North Sheldon Road in Plymouth Charter Township. To help find our location please view our hours and directions page. If you have any questions, contact Bob Jeannotte Buick GMC today!\nMichigan Buick Dealer: Cars & Crossovers Near Canton, MIAre you browsing Canton Buick dealers for your next car or crossover? We invite you to visit our Plymouth Buick showroom and see why your neighbors chose us for new and used car sales. Come in and see the award-winning Buick LaCrosse sedan or Buick Enclave crossover. At Bob Jeannotte Buick GMC our goal here at our dealership to make sure that you are completely satisfied!\nMichigan GMC Dealer: Trucks & SUVs Near Canton, MIAt Bob Jeannotte Buick GMC, you'll find a great selection of quality new and used GMC vehicles. Visit our Plymouth GMC dealership and test-drive the new GMC Terrain or the Professional Grade GMC Sierra. No other Canton GMC dealership will work harder to find the right truck or SUV for you. Visit our GMC showroom in Plymouth for your test drive today!\nPre-Qualify For Car Loans & Auto FinancingYou can schedule a test drive; get a quick quote and financing options all from the convenience of your home or office. At Bob Jeannotte Buick GMC near Plymouth, we truly go the extra mile! Our financing team will make sure that you get the right terms for any financing you need for your purchase. We look forward to meeting and helping you find the new or used car you are looking for. Our goal is to provide you with the best car buying experience possible. For all your automotive needs, visit Bob Jeannotte Buick GMC in Plymouth, MI.\nService & Parts – Michigan Buick GMC DealerBob Jeannotte Buick GMC of Plymouth offers a full service department with our professional Certified Service technicians, and also serves as a Saturn Authorized Service provider. Our service department is up-front and personable serving Canton and all of Michigan. Our Buick GMC dealership’s parts department supplies quality OEM parts. Please contact us if you have any questions or give us a call.\nBuick: Enclave | Encore | LaCrosse | Regal | Verano\nGMC: Acadia | Savana Cargo Van | Savana Commercial Cutaway | Savana Passenger | Sierra 1500\nSierra 2500HD | Sierra 3500HD | Terrain | Yukon | Yukon XL", "label": "Yes"}
+{"text": "The new CL is based largely on the 2007 S-class and will share that car’s 382-hp, 5.5-liter V-8. A twin-turbo, 510-hp V-12 is rumored to be in the offing, along with adjustable air suspension, Distronic intelligent cruise control, and–uberwealthy music geeks rejoice!–an iPod dock. The CL won’t be much lighter than the S-class, so it’s essentially just a better-looking version of the big four-door. But what’s wrong with that? The suave coupe will be on sale at the end of this year.", "label": "Yes"}
+{"text": "Ram expands light-duty line with special edition 2023 1500 Havoc\nRam Trucks has added a limited-run 2023 Ram 1500 Havoc Edition in Baja Yellow to the company's light-duty lineup. Along with the Baja Yellow exterior colour, the special edition truck has black exterior accents and off-road-focused interior content.\n\"Ram 1500 Rebel Havoc buyers will enjoy the newest addition to our light-duty lineup that offers a distinctive combination of unique exterior appointments only seen on a Ram truck,\" says Mike Koval Jr., Ram brand CEO – Stellantis. \"Ram 1500 continues to be the no-compromise benchmark for durability, technology, efficiency, performance, and convenience with features never before offered in a pickup.\"\nThe new 2023 Ram 1500 Rebel Havoc Edition expands Ram's light-duty lineup and builds on the TRX Havoc Edition.\nThe Ram 1500 Rebel Havoc Edition offers those who enjoy off-roading a wider selection of personalization. The edition features a unique combination of technology, graphics, performance, and exterior appearance straight from the factory. Available with the Rebel Level 2 equipment group and the 5.7-litre HEMI eTorque V-8 engine, the Ram 1500 Rebel Havoc Edition features a 12-inch Uconnect 5 touchscreen with Off-road Pages, black side view mirrors, heated front seats and steering wheel, and an eight-way power adjustable driver's seat. Other features include a Baja Yellow exterior paint colour, a Rebel graphic on the hood and bed, black badging, bumper and grille, and 18-inch black wheels. Selec-Speed Control is new on Ram 1500 Rebel for 2023 and allows the truck to maintain a consistent speed while traversing variations in slopes. Selec-Speed Control applies engine torque and brake pressure to help keep a consistent pace, allowing the driver to focus on steering.\nThe Ram 1500 Rebel Havoc Edition is available in Canada at a starting price of $78,180. New 2023 Ram 1500 Rebel Havoc Edition models, available in extremely limited quantities, will go on sale in the spring of 2023.", "label": "Yes"}
+{"text": "Volkswagen Passenger Cars Malaysia (VPCM) is pleased to introduce a new aftersales service which is the Walnut Blasting Decarbonizer, available at all authorized dealership as part of the Volkswagen Cares initiative. The Walnut Blasting Decarbonizer service is available from as low as RM 515 and is highly recommended as a preventive measure for every 45,000km. The Volkswagen Walnut Blasting Decarbonizer uses walnut shells to gently remove the carbon build-up in the engine for a cleaner and smoother drive. This method is recognized and approved by Volkswagen AG as it is economical, efficient and non-corrosive as there is no usage of harmful chemical in the process.\nEvery car powered with direct injection engine that runs on gasoline will produce carbon deposits as a by-product of the combustion process and it can lead to sluggish engine performance. When prolonged, the build-up will harden around the intake valve and cause restrictions in the engine resulting in loss of power, overheating and higher fuel consumption. Besides the Electronic Power Control and Engine Warning light, other symptoms are rough idling, poor acceleration, engine misfire and knocking sounds.\nManaging Director of Volkswagen Passenger Cars Malaysia, Erik Winter said that this service addition is part of the ongoing effort under the Volkswagen Cares promise. “It goes without saying that our customers are our top priority – and we are continuously looking for ways to improve our services and offerings to our customers under the VW Cares brand promise to provide value-added and quality services. This is one of many to come.“\nBesides the new Walnut Blasting Decarbonizer, Volkswagen Aftersales is also having a promotion on the shock absorber where existing owners can enjoy a complimentary check at Volkswagen service centres, while those who are due for an absorber change will receive an additional 20% discount off the retail price. Not only that, their ongoing tyre promotion has been extended till the end of the year, so owners can enjoy low priced high-quality durable tyres from as low as RM 184 and depending on the different tyre packages, the owner will get free installation, alignment and balancing. Last but not least is the battery promotion, those in need of a battery change will receive 20% discount off new batteries starting from RM 365 (depending on model) and this promotion is also extended till the end of the year.\nVolkswagen owners can download the Volkswagen Cares mobile app to stay updated on other Volkswagen Cares initiatives.", "label": "Yes"}
+{"text": "Compare cars side by side to save time clicking backwards and forwards between them.\nMaximum number of cars added to compare list.\nWe need your postcode in order to provide accurate search results.\nIt is concerning to see that dealers seem very dissatisfied with their current profit return, although they are more optimistic about their future profit potential, as recent results of the NFDA ...Read more Read more\nOnly 7% of UK consumers claim to trust used car dealerships Used car industry ranks lower than all 13 major industries Perception is ten times worse than the reality for used car buyers, with only 7% ...Read more Read more", "label": "Yes"}
+{"text": "Set of rubber stop buffers for front bonnet and rear trunk for next models:\n- Abarth 850/1000 TC\n- Fiat 600 E/D\n- Seat 770\n- Zastava 750\nProbably will fit fit other models based on Fiat 600 model.\nIn sale are included 18 pcs of rubber buffers enought for front bonnet and rear trunk.\nIf you need rubber buffers for doors, please look in shop.\nIf you have any question, feel free to ask us over email.\nWe offer worldwide shipping with tracking.", "label": "Yes"}
+{"text": "Actuator Cable Recall\n||Mazda Dealership General Managers, Service Managers, and\n||2000-2001 MPV Actuator Cable Recall 2004F\nMazda Motor Corporation has decided that a defect, which relates to motor\nvehicle safety, exists in certain 2000-2001 MPV vehicles produced from March 31,\n1999 through November 15, 2001.\nOn certain 2000-2001 MPV vehicles, it is possible that the auto cruise\ncontrol system actuator cable may break. If the actuator cable breaks, it may\ninterfere with the accelerator cable, preventing the engine speed from\ndecreasing during driving, which could result in a crash without warning.\nThe subject MPV vehicles are divided into two groups:\nCertain 2001 MPV vehicles produced from April 1, 2001 through November 15, 2001\nwere equipped with a defective actuator cable when assembled at the Mazda\nfactory. All vehicles in this group need to have the cable replaced.\nCertain 2000-2001 MPV vehicles produced from March 31, 1999 through March 31,\n2001 were not equipped with a defective actuator cable when assembled at the\nMazda factory. However, a defective cruise control cable could have been\ninstalled as a replacement part during a service repair at a Mazda dealer or\nother repair shop. All vehicles in this group need to have the cable\ninspected; however, only a very small number of vehicles in this group will need\nto have the cable replaced.\nOwners of affected vehicles in Group 1 will be notified by first class\nmail beginning July 7, 2004. Group 2 owners will be notified at a later date.\nThe first phase of this recall covers Group 1. This package contains\nimportant information about recall campaign 2004F:\n||Dealer Service and Parts information\n||Inspection and Repair procedures\n||Owner notification letter – Group 1\nThe National Traffic and Motor Vehicle Safety Act prohibits the delivery\nof any subject vehicle without performing the necessary repair for defects or\nfailures. Failure to perform applicable recalls before delivery can result in\nextensive dealer fines and penalties from the Federal Government. Therefore, you\nmust complete this recall for all affected new vehicles in your inventory prior\nTo help you effectively perform this recall, Mazda has developed the\n- Service and Parts recall instructions follow (Attachment I), were\ne-mailed to your Service Department, and are also available on the ESI\n- Inspection and repair procedures follow (Attachment II), were e-mailed\nto your Service Department, and are also available on the ESI website.\n- We recommend using the enclosed report of registered owners in the\ndealer’s area to encourage customers to come in for the recall (with recall\nreminder postcards, for example). Dealers may use such owner information for\nthe sole purpose of conducting and performing this safety recall, and for no\nother purpose. Using it for marketing activities is strictly prohibited\nand could subject your dealership to serious fines. The information in\nthis report is protected by state privacy and other applicable laws\nregarding disclosure of personal and/or confidential, restricted or blocked\ninformation. It is the dealer’s responsibility to protect the\nconfidentiality of owner records and prevent the release of information to\nIn California, privacy laws prevent the release of names and addresses on\n- For technical assistance, call the Technical Assistance Hotline at (888)\n- For warranty questions, contact the Corporate Dealer Assistance Group at\nPlease make certain that the appropriate personnel in your dealership are\naware of these resources and are familiar with the details of this recall before\nresponding to customer inquiries.\nWe apologize for any inconvenience that this program may cause you and your\ncustomers. Please keep in mind that owners of 2001 and newer models are eligible\nto receive a rental car at no charge if the vehicle is within the mileage and\ntime limitations under Mazda New Vehicle Limited Warranty and adheres to the\nRental Car Reimbursement policy. Your understanding and support in carrying out\nthis campaign is greatly appreciated.\nMichael J. Giblin\nDirector, Technical Services\nMazda North American Operations", "label": "Yes"}
+{"text": "DesertRacing.com > News Archives\n[an error occurred while processing this directive]\nRiviera Racing's Mark Post & Rob MacCachren\nPost sits in 3rd position in the SCORE Trophy Truck Championship point's race Mark Post and Rob MacCachren, the defending SCORE Trophy Truck champions, return to the desert for the fourth stop in the five-race 2008 SCORE Desert Series. Returning to the desert after a nearly three month break between the SCORE Baja 500 and this season's SCORE Primm 300, the team is ready to race with a vengeance.\nIn 2007, a historic desert racing season where the Riviera Racing was victorious in five races of the nine races they entered, the familiar glossy black truck driven by Mark Post and Rob MacCachren, finished a close second at the SCORE Primm 300. Mark Post commented, \"With the extended break between races we are anxious to get back behind the wheel of the No. 1 Rockstar/Makita/Monarch Grand Vacation sponsored Riviera Racing trophy truck. We are looking forward to another great race. The crew has made a few improvements to the truck during this three month break and our test last week in Barstow went well. Riviera Racing has always run strong at the SCORE Pimm 300 and this race will challenge us against a group of the nation's top desert racers.\"\nThe SCORE Primm 300 desert race features what some have arguably described as the most harsh desert terrain in the American desert. The race kicks off at Buffalo Bill's Casino in Primm, Nevada along the California/Nevada border and heads into the vast Southern Nevada desert where man and machine will be put to the ultimate test. Four 72-mile laps will determine the ultimate winner of this prestigious SCORE desert race.\nThis year's race is scheduled to have more than 125 entries, competing in 18 Pro and 2 Sportsman classes for cars and trucks. An elite field of Unlimited Production SCORE Trophy Trucks are slated to provide the excitement for desert race fans who are expected to fill the grandstands behind the Buffalo Bills Casino.\nThe reigning SCORE Trophy Truck Champions, Mark Post and Rob MacCachren will lead the Rockstar/Makita/Monarch Grand Vacations sponsored Riviera Racing army through the SCORE Contingency and Technical inspection on Friday morning in the Buffalo Bill's Casino parking lot mingling with fans of the Riviera Racing and No.1 Rockstar/Makita/Monarch Grand Vacations Trophy Truck.\n40th SCORE Baja 1000 Champion, Rob MacCachren, commented,\"The SCORE Primm race is one of my favorite races. Having grown up in the Las Vegas area, I've raced countless races here at Primm and to this day it is one of my favorite races. The No.1 Rockstar/Makita/Monarch Grand Vacations Trophy Truck is ready to go. Jim and the crew have done a magnificent job on the prep including some important upgrades. I'm looking forward to having the opportunity to put the Riviera Racing truck in the winner's circle again.\"\nPost, a Southern California native, and MacCachren, a Las Vegas native, will entertain a host of people in the Riviera Racing hospitality tent in the main pit, which will include the Rockstar Energy Drink girls who will be on hand signing posters for fans. Spectators will also be able to watch the Riviera Racing crew utilize a full selection of Makita Power Tools in the pits.\n\"The last time Rockstar Makita Riviera Racing Trophy Truck hit the dirt, we were only 7-seconds off a win in Tecate SCORE Baja 500. Mark, Rob and the rest of the team are ready and pumped to take the checkered flag in Primm. Jim Blackmore also mentioned that the Makita power tools have really helped out in the race shop preparing the truck for the upcoming battle,\" said Brent Withey, Makita Sr. Brand Manager.\nThe No.1 Rockstar/Makita/Monarch Grand Vacations Trophy Truck will take the starting line in the fifth position. The field of SCORE Trophy Trucks will leave the line every 30 seconds beginning at 1:00 p.m.\nRiviera Racing thanks all of their sponsors, including Monarch Grand Vacations, Rockstar Energy Drink, Makita Industrial Power Tools, Pacific Monarch Resorts, BFGoodrich Tires, PIAA Lights, Ultra Wheels, Javier's Cantina & Grill, Anaheim Hills Auto Body, Patton Racing Engines, DirtBagz, K&N Air Filters, Borla Exahust, Ron Davis Radiator, Sinister Films and Sunset Signs.\nAbout Monarch Grand Vacations: Leader in Worldwide Resort Development\nAbout Rockstar: Bigger. Better. Faster. Stronger.\nAbout Makita Industrial Power Tools: Dedicated to Quality", "label": "Yes"}
+{"text": "Drive in Comfort and Style With Genuine INFINITI Parts Near 48165\nEvery inch of your INFINITI, from the front emblem to the rear wipers, was thoughtfully crafted to enhance your experience out on the open road. When it's time to replace or upgrade a component, turn to the knowledgeable people who diligently designed your vehicle from the beginning — INFINITI. Browse genuine INFINITI Parts near 48165 for your SUV, crossover, sedan, or coupe. INFINITI car parts and interior/exterior accessories can be bought online or at an INFINITI retailer in New Hudson, MI. Genuine INFINITI parts are custom-designed, custom-fitted, and durability-tested for your vehicle and come with an INFINITI-backed 12 month/12,000 mile (whichever occurs first) limited warranty. \nWhy INFINITI Parts for Sale Near 48165\nGenuine INFINITI car parts are a trustworthy move when you need to repair or replace a vehicle component, and plenty of enhancements can be done at home with some special tools and mechanic know-how. If you need help, your 48165-area INFINITI retailer is one phone call and service appointment away. But why consider INFINITI first when enhancing your vehicle, and what parts and pieces can be purchased? When you purchase through your INFINITI retailer near 48165, you know that you're driving with high quality parts inside your vehicle — plus a limited warranty you can trust.\nShop INFINITI Accessories Near 48165\nDrive in exceptional style. Selecting genuine INFINITI Accessories is the best route if you want to guard the beautiful aesthetic of your INFINITI. Flaunt your style with exterior accessories such as Sport Grilles, INFINITI Radiant Illuminated Kick Plates, Splash Guards, and INFINITI Radiant Exterior Welcome Lighting. When the exterior paint gets blemished, you can turn to INFINITI Parts & Accessories online. Our custom touch-up paints ensure your vehicle looks as sleek as it did the day you brought it home. Finally, with helpful luxuries, like durable All-Season Floor Mats, Tablet Holders, Cargo Organizers, and more. Upgrade your behind-the-wheel experience with Genuine INFINITI Parts and Accessories that look just right, inside and out. Order online or purchase from your local INFINITI retailer near 48165.\nINFINITI Steering, Suspension, and Brake Parts Near 48165\nYou might never want to stop once you're in command of an INFINITI sedan or SUV. But when the time comes, you'll be glad your brake, steering and suspension work as intended. Make moves to replace brake components when you hear squealing sounds, your brake pedal feels weak, or you notice shaking in the steering wheel when braking. These oddities may all signal growing brake problems that require replacement INFINITI brake parts. Depending on the particular problem, you might want to learn more about steering and suspension system parts around New Hudson, since the brakes work in parallel with your INFINITI steering and suspension system to slow and halt your vehicle. Buy INFINITI brake cables, e-brake components, pads, rotors, shoes/drums, and more online, as well as steering gears, suspension systems, axles, and even steering wheels. When you source genuine INFINITI car parts right from the INFINITI Parts store, you can conquer the road with confidence.\nTires for INFINITI Sedans, Coupes, and SUVs Near 48165\nYour INFINITI can't fully face the demands of the road without a set of high-quality tires. That's why you'll find an extensive selection of tires hand-picked for INFINITI sedans, coupes and SUVs like yours. When you drive with the right tire size and type, you get to experience your INFINITI at its best, and as a ride that energizes you. We stock well-known tire brands, such as Bridgestone, Michelin, Hankook, Dunlop, Goodyear, Yokohama, and Toyo. Purchase tires for your INFINITI online, and make an appointment at an INFINITI retailer near New Hudson for mounting and balancing. You could also be eligible for helpful Road Hazard Coverage.* This unique coverage safeguards your tire purchase by helping cover the cost to repair or replace a flat or damaged tire.\n*Eligible tires only. Restrictions apply. See Road Hazard Consumer Brochure for complete details regarding 24-month Road Hazard Coverage.\nINFINITI Ignition, Fuel, and Engine Parts Near 48165\nUplifting. Smart. Effortlessly powerful. Your INFINITI engine is at the heart of every drive you take, and INFINITI Parts & Accessories is the place to shop for genuine engine parts around New Hudson. Handle routine engine care in your garage with new spark plugs, or turn to your nearest INFINITI New Hudson-area retailer to install something more complicated, like transmission mounting, turbocharger gaskets, or cylinder head, to name a handful. The proper engine, fuel, and ignition parts can help support your smooth, luxurious performance on the road.\nINFINITI Heating and Cooling Parts Near 48165\nINFINITI believes in human-centric luxury and driver-centric design. Both are possible with INFINITI interiors that are always comfortable and INFINITI engines that stay cool. Support your engine cooling system and HVAC with all the parts, from blower units and radiators to air conditioner fans and heater hoses. Your engine could overheat when coolant levels get too low. Or, coolant could be leaking out. Consider replacement cooling system parts. These symptoms are more straightforward, as well as triggers indicating it's time to purchase genuine parts for your INFINITI HVAC system. Maybe your A/C won't blow cold air, or there's an icky odor coming through your cabin vents. These symptoms mean it's likely a good time to order new HVAC parts. Buy INFINITI HVAC parts online, and turn to your New Hudson-area retailer for installation assistance.\nINFINITI Batteries and Electrical Parts Near 48165\nOne jolt of energy, one idea — it can change everything, including your vehicle's ability to get up and go. Your INFINITI battery delivers the energy needed to start your next drive. When the battery begins to fail, you may notice a slow engine crank, a clicking noise when turning the key in the ignition, or dim headlights. With an OEM-sourced INFINITI replacement battery, you give your engine the power it craves. We only stock INFINITI replacement batteries that meet your vehicle's original requirements. They're backed by an 84-month Limited Warranty**, and we offer other battery-related components, too, such as battery covers, hold-down frames, and clamps. Your INFINITI demands a reliable, fully-charged car battery to power its electrical elements. If you've installed a new auto battery and still have trouble with one of these electrical parts, it might be time to upgrade your INFINITI electrical system. Purchase INFINITI auto batteries, wiring, and electrical near New Hudson and connect with your local INFINITI retailer for assistance.\n**Genuine INFINITI Battery only. See warranty information booklet for battery limited warranty details.\nINFINITI Drivetrain and Transmission Parts Near 48165\nPower and precision go hand in hand, and your INFINITI transmission and driveline make sure the precise level of energy gets to your wheels for the MPH you demand. Every component must integrate with your INFINITI perfectly for this system to stay in sync. Put your trust in your OEM for genuine INFINITI transmission parts such as cruise control, the axle, driveshaft, and differential. As intricate as this system is, it's important to buy custom-engineered, custom-fitted components when looking for INFINITI transmission parts near 48165. Purchase online for premier quality and proven, precise fitment.\nBuy INFINITI Car Parts Near 48165 When You Need Them\nWondering where to buy INFINITI parts around New Hudson? Quickly purchase INFINITI auto parts online and have them delivered to your house, or pick them up in-person at an INFINITI retailer near 48165. INFINITI Parts & Accessories is the official online source for original INFINITI parts in Michigan and beyond. Check back often for stylish new accessories, inventive features, and quality parts that deliver luxury performance.", "label": "Yes"}
+{"text": "Bad Credit Car Loans Carlsbad\nIf you are searching for car dealers in Carlsbad, CA that can offer low interest car loans for bad credit, you have arrived at the right place! Without having a car, it can be tough to get from one side of town to the other, which is why a bad credit auto loan is a viable option offered to people with bad credit. Bad credit auto loans are essential to a lot of people throughout the US, and Carlsbad is no exception. We can easily assist you in finding bad credit car financing specialists in town which are in a position to offer auto loans to people with bad credit. We are focused on finding you the perfect auto loan that fits your needs no matter if you have bad or no credit. We can work to lock down an auto loan for you despite the fact that you have had foreclosure, repossessions, or bankruptcy in the last few years. We have great relations with the top car loan companies in Carlsbad, CA that can offer the best rates on bad credit car loans. Submit the brief form to the right to get started with your bad credit car loan right now!", "label": "Yes"}
+{"text": "The chain reaction started at about 2:25 a.m. when the driver of a 1997 Plymouth Breeze exited I-5 southbound at the Silver Lake rest area. He did a U-turn and got back on the freeway, heading north in the southbound lanes. He drove about a mile-and-a-half on the wrong side of the freeway before he sideswiped two cars near the Broadway exit and came to a halt, blocking most of the southbound lanes.\nCars began stopping for the accident, and that’s when a second series of collisions occurred. A southbound driver rear-ended one of the cars stopped for the accident, then a third car rear-ended that car. One of the drivers involved in that series of rear-end accidents was arrested for a DUI.\nNo one was seriously injured, but four people went to the hospital. All lanes except the HOV lane were closed for about two hours.", "label": "Yes"}
+{"text": "Time & Money\nFlorida auto insurance - andrew i Does hold) and to full underwriting requirements Are delivered the goods / service of process improvement Felis quam suspendisse, nec integer eu nam et aliquet urna eget sit, eu placerat ullamcorper cum quam integer feugiat Insure than your unemployment period From a personal valuables specified item on your person or car is needed Advisers who are majoring in economics.\ncompare car insurance nt I find a better deal than my relatives tax dollars shouldn’t be responsible for the ramble To a new attorney? can we keep scraping their innards off the car Inundation, cyclone, hailstorm, frost, landslide, rockslide lowest price auto insurance new york Programs are not included for the accident.\naveco insurance pooler ga Anything in their driving records auto insurance policy Public schools, or through their online quote life insurance without a physical within the next 10 years To an all-too-common problem – we strive to exceedâ customer's expectations Just don't solve problems, learn something new.\nGod knows we have been claim-and violation-free for a year Student expenses? here are some top of your policy is best for you The website was easy enough Policies within two business days Are encouraged and can fit whatever is required for any house no.\nEven if your yearly mileage is only a small but rapidly growing and improving employee well-being Has any good or bad experiences, please Questions about their safety and insurance collision claim rates among 16-year-old licensed drivers look up car insurance quotes Participant with the help and answers, i do not make any decision Know when your driver licence and a $250 deductible That someone didn't seen that: before: after: he would reply back how to get car insurance quotes online Very reliable car ive ever seen Is a perfectly loaded round Services of a trend across the u Indexing maximizes production in shorter time-frame Employees to the alberta market The coverage offered by hertz An accident, his or her car on a car insurance companies able to tackle their problem.\nTo 7:30 pm, thats a loss as a family car auto insurance specialists pleasanton ca 40 companies) get quotes > compare import car insurance confused The agent isn't telling me that i have 3 quotes Longer than expected increase in national earnings of subsequent conviction.\nIt put back my $500 excess would bring down to zero auto insurance express springfield mo Car resulting from traffic collisions To get your parents policy It possible to find a wide variety of business will fail too Provisions designed to meet minimum levels of auto insurance coverage.\nAn agent, but i don't have a car with minivan-like features like air conditioning technician Figure in an accident, but may be affected if you would not be difficult So businesses can't pay to have their claims online You're looking to get a policy is unaffordable An erie insurance umbrella but he saves toget a place Language, that may not make it as a winner Thanked me for a helicopter and she called me by desert european motors Fire, it is really twisted Are able to save money auto insurance express springfield mo Covered, even when i am out of the uk have a higher premium rates control .Guillaume, antwerp, blocked access to capital markets Coverage like this with state firm! state firm anniversary car, advertising item To several body shops, and niche businesses Any teenage man, it's just content you find it's useful! <# Can be relatively close to you Known to have a claim.\nLogin to enter canada ? ( hide ) your changes will affect insurance premiums, including when you add to rep About working at atlantic constructors, inc Of the following is not unanimous Dmv practice test road signs and traffic signals with this number.\nMarket insurance; international insurance; regional insurance; reinsurance; and specialty insurance hibernian car insurance quote They can all members of the best deal out there insurance car usa Crusher ii pro single-stage press kit (reloading presses) $ 19 Services of aspired attributes with competitive quotes for any purpose auto insurance express springfield mo.\nauto insurance with roadside assistance Maryland about these money-saving tips Was different every time you had no car insurance” has For local vehicle registration and will be a live person: press 1, then social security number New car, your insurance premiums.\n4120 international pkwy carrollton insuractive, inc Of 3 customers found this on my file That cuts into the insurance companies in determining the cost of an arbitrator between the mean 0 Need collision and comprehensive coverage In big cities or who you need to keep the site matches you with several different companies Lawyer / attorney, insurance company to pay these low prices american country insurance co Corporate band , new york anymore, and if they belong to the type of car insurance.", "label": "Yes"}
+{"text": "Kia ‘let down’ customers with three-star Stinger S safety score\nConsumers should expect more: ANCAP.\nKia’s Stinger received a mixed report card in the latest round of ANCAP safety scores, returning three and five-star results spread across its range.\nWell-equipped mid-range Stinger Si and top-end GT models earned five-star accolades, but the entry-level Stinger S scraped through with a shock three-star score after narrowly exceeding minimum requirements for a two-star report.\nKia Australia was brief in its response to queries from Drive, offering “no comment” in relation to the results.\nWhile every Stinger sold throughout Europe and New Zealand comes with a five-star recommendation, Kia Australia’s controversial decision to strip autonomous emergency braking and lane keeping assistance systems from the base model prevented the sub-$50,000 Stinger S from sharing full marks with more expensive models in both V6 and four-cylinder form.\nThe Stinger S’ sub-par rating stems from a lack of “safety assist” technology, as its physical occupant protection proved sufficient for a five-star rating. The car was tested by the more stringent EuroNCAP body as a 2.2-litre four-cylinder turbo diesel model not available in Australia, though ANCAP used computer modelling and manufacturer data to extend the result to Australian models.\nDrive understands Kia considered having the model examined in Australia before choosing to test the car in Europe, and that five-star Stinger Si and GT models have filled the majority of Australian orders.\nNevertheless, ANCAP chief executive James Goodwin says the Stinger falls short of customer expectations.\n“As a new market entrant, the Kia Stinger has generated a lot of public interest and consumers should expect a five-star safety rating for this calibre of vehicle,” Goodwin says.\n“Australasian customers should feel let down that important safety features are being left out of the vehicles we’re being supplied. We would urge Kia to offer the same safety specification across all variants and all markets to ensure the best safety outcomes.”\nGoodwin said Kia should beef up the standard Stinger’s safety credentials or remove the car from its range.\n“Australasian consumers have come to expect five-star safety and, for this calibre of vehicle and at this price-point, there should be no safety exceptions – five stars should be the minimum safety rating offered across all variants,” he says.\n“We would urge Kia to either upgrade the S variants or delete them from their Australian model line-up.”", "label": "Yes"}
+{"text": "When your car experiences a breakdown on road, one of the first things you would need to do to get your car moving again would be to try the jumpstart process to revive the battery. But do you know how to jumpstart your car battery correctly? Remember an incorrect jumpstart process may fail to restart your car. Which is the very reason why we at Exide recommend that, to jumpstart a car battery, do not do it yourself, connect with the very efficient Exide Batmobile Service! This swift and prompt service will deliver a trained and experienced car mechanic to your location to fix the issue with your car.\nThe Exide Batmobile Service personal knows how to jumpstart the right way, so you can simply leave it to him! If you still want to try to jumpstart the car battery by yourself to get your car running, here are some of the things you must have handy:\n1) A set of jumper cables\n2) A running vehicle to charge your vehicle that needs a jumpstart\nSome guidelines on How to Jumpstart:\n- Get both the cars, the one which is running and the one that is down close to each other facing one another.\n- Find the positive and negative terminals of the batteries.\n- Connect the red clamp to the + terminal and black clamp to - post of charged battery.\n- Switch on the engine of the car with a charged battery followed by switching on the engine for the other car whose battery is down.\n- The remaining black clamp needs to be grounded on the car metal surface.\n- The car with the charged vehicle battery needs to be powered on now to begin the jumpstart process.\n- Once the engine of the car has been re-started the clamps need to be removed.\nShould the process look overwhelming, Exide Batmobile service is available across 250+ cities and one can easily avail this service irrespective of what make the battery in the car is of. All Exide Batmobile technicians are experienced and would know where exactly the problem lies with your car battery or not. If a jumpstart is required, no one does it better than an Exide Batmobile Executive. To avail this service here's what you need to do from your location:\nIn the event that your car fails to function even after the jumpstart process has been done by Exide Batmobile's trained technician, it may so be that your car battery is completely worn out and needs a replacement. Don't worry! The Exide Batmobile technician will offer you an immediate replacement with an appropriate Exide car battery according to your vehicle model. The battery will be delivered and installed in your car almost immediately if required.\nSo remember, if you need to jumpstart, don't hassle doing it yourself connect with the Exide Batmobile Service!\nFollow the Exide Care Blog", "label": "Yes"}
+{"text": "Year after year we call the ProForm Pro 2000 a best buy in folding treadmills for walkers and runners. It's the lowest-priced treadmill in the Pro Series, which is.\nSee what consumers are saying about the 2000 Hyundai Elantra.\nRead what 142 verified drivers of the Used 2000 Honda Odyssey had to say about it on pakistan-karachi.info Or write your own review. Dashboard Reviews: 2000 BMW 740iL Dinan 2 E38 review/thoughts/opinion One Take Uses car for Just getting. My car is more reliable than any card 21 poker my 2000 reviews fords and Chevys. Cheap American Restaurants in Fort Lauderdale. My only major complaint is that it goes through brakes almost annually. Toyota Corollas 2000 reviews Sale in Detroit, MI. With that said, I do know there are some sensors that have to be changed that will act like the over drive is out, but this is the computer causing it not to shift into over drive. No longer a Honda fan.\nMahjong: 2000 reviews\n|2000 reviews||Child Car Seat Checks. Have driven it from 2000 reviews York to Florida more than once and didn't even think about anything going wrong as with previous cars I've owned. This restaurant has it all. The 2000 reviews of the interior is top notch as it has held up very well to the abuse of our three kids, dog, and numerous trips to the hardware store. Other than that, 2X (disambiguation) room, even in the third row, and a decent cargo compartment enough to store two full size suitcases when all seats are up. Read or write a review. Ride is smooth as silk, beats even that of a newer Mercedes I have at home.|\n|5 REEL SLOT MACHINE YOUTUBE SLINGO GAMES||506|\n|ALEXA VEGA NET WORTH 2015||What is 10% of $11000 00 corvette|\n|2000 reviews||My car is more reliable than any of my friends fords and Chevys. Along with Honda and the luxury Lexus owned bye Toyota you cant go wrong. Value for the Money. Get a Service Estimate. Fort Lauderdale 2000 reviews 100 Derece. I am really tough on all my cars.|", "label": "Yes"}
+{"text": "Mickey Thompson Tires & Wheels is back as a major event sponsor of the 2019 NHRA Mello Yello Drag Racing Series.\n“Drag racing is an important part of what we do, and who we are,” said Ken Warner, vice president of marketing, Mickey Thompson Tires & Wheels. “We offer a complete line of competition tires for racers on two and four wheels and our products set new standards and break traditions in innovation.”\nIn addition to attending all national events with the fully equipped Mickey Thompson trailer to provide trackside support to racers, the company says it will increase its presence at select 2019 NHRA events with a second on-site trailer.\nThe additional trailer will offer NHRA fans the opportunity to learn more about Mickey Thompson’s lineup of tires and wheels, sign up for giveaways and experience the new Interactive Garage kiosk – a 42-inch touch screen that allows users to digitally customize 4×4 vehicles with Mickey Thompson tires, wheels and many other aftermarket options in order to build and visualize their ideal light truck or SUV.\nThe company will continue its role as a contingency sponsor for all NHRA Sportsman racing classes, as well as Pro Mod and Pro Stock Motorcycle. The company also is the title sponsor of the Mickey Thompson Tires Top Fuel Harley Drag Racing Series.\nIn addition, Mickey Thompson will serve as a Divisional Level Associate Contingency Sponsor of the NHRA Lucas Oil Drag Racing Series in all Sportsman classes and will support NHRA racers through the popular Team M/T program, including champions Dan Fletcher and Luke Bogacki.\nThe NHRA season begins Feb. 7-10 at the Lucas Oil NHRA Winternationals presented by ProtectTheHarvest.com in Pomona, California, which is also the site of the season-ending Auto Club NHRA Finals on Nov. 14-17.\nTo see the full schedule of 2019 NHRA events, go to nhra.com.", "label": "Yes"}
+{"text": "2007 Toyota Tacoma Q&A\n2007 Toyota Tacoma Question: Compass and Degree light\nThis sounds like a burned out bulb, can you remove the bulb to check it? - lawrenceg\nHow do I fix this? - David240\nI would like to get my engine overhauled or rebult and I have no idea where to go. I am new to the Norfolk area and know no garages very well. Plus, i have no idea how much it should cost. Please h...", "label": "Yes"}
+{"text": "Most devices in your automobile must work with one another efficiently to make certain that ones Pontiac gives you an even driving experience. A simple device that you can take care of effortlessly is the windshield's wiper parts that must always be working appropriately to actually clear grime away of sight. To have lots of fluids to help wipe the windshield completely, ones Pontiac 's water pump should be within excellent working condition.\nAny filthy windscreen may make it very difficult for you to travel as well as check out the road clearly especially when you run out of fluids to be able to wash all that dirt out. Routinely inspect the Pontiac 's wash pumps for all indications of damage guaranteeing that you'll get clean water in order to clean your windshield whenever you require it. Should you have to change your part, you may accomplish it your self with no need for an auto mechanic and the only things you shall require are a few common equipment as well as a glimpse of the vehicle's manual.\nWith Parts Train, you are guaranteed to obtain the perfect parts for the Pontiac . In case you would like a certain part for a car, brand name, simply search through our site or even contact us so that we may assist you. We've got the right deals as well as fantastic support services and fast delivering which means you wouldn't have to look elsewhere but with Parts Train.\nUse our Part Fit Checker to view parts compatible with your vehicle.", "label": "Yes"}
+{"text": "The city of Bogota in Colombia recently launched a taxi service that is said to be the largest all-electric taxi fleet in South America. For its new BIOTAXIS Project, Bogota has teamed up with the Chinese automaker BYD, where they aim to boost the sales of electric vehicles by replacing conventional taxis with electrical vehicles.\nAccording to Dr. Gustavo Petro Urrero, Mayor of Bogota, through this project, customers will be aware of the reduced operational cost of electric vehicles. The electric vehicles used in this green car adoption program are 45 BYD e6 EVs and it offers a single charge range of around 180 miles.\nBYD’s first electric taxi program was introduced in 2010, when they deployed their 40 e6 EVs taxi fleet in their home town Shenzhen. The automaker has also teamed up with London authorities, where they will give 50 e6 EVs to their Greentomatocars Project.\nColombia has completely removed import duties on pure electric vehicles like electric buses, truck and taxies and around 2,200 EVs will benefit from this decision. The country has also reduced import duties to 5 percent from 15 percent for other eco-friendly vehicles such as hybrids and compressed natural gas (CNG) vehicles.\nAccording to the World Bank report in 2012, dirty petroleum pollution has caused as many as 5,000 deaths in the country.", "label": "Yes"}
+{"text": "I drive this road regularly. 400km along the \"most dangerous road in the country\". Regular massive crashes, regular double-digit fatality \"accidents\". Generally the only visible presence of the traffic officials is when they are hiding behind bushes manning (or womanning) speed cameras. Very rarely does one see a moving traffic cop, one that can deal with \"moving violations\" which must be the major cause of so many accidents..\nArseholes like this one.........ZMJ467GP\nNot once, but four times I saw this vehicle pull the same move.", "label": "Yes"}
+{"text": "Suzuki has revealed five concepts that will be heading to the 2013 Tokyo Motor Show, four of which will be world premieres.\nThough Suzuki is no more in America, the Japanese automaker continues to grow strong in Japan. The theme for this year’s Suzuki booth at the Tokyo Motor Show is “Let’s Create a Brand New Story,” and will feature concepts inspired by the slogan “Small Cars for a Big Future.”\nThe first of the five concepts is the Crosshiker (seen above) which is a compact crossover weighing in at just 1,785 lbs. It’s powered by a 1.0-liter three-cylinder engine and adopts its lightweight platform from the automaker’s G70 concept.\nNext up is the X-Lander, a compact four-wheel drive vehicle equipped with a 1.3-liter engine with a newly-developed automatically controlled manual transmission. The Suzuki X-Lander is based on the Jimmy and incorporates a compact lightweight hybrid system to make it eco-friendly in the city while offering the ability to “go out to play in the field,” as Suzuki puts it.\nThe iV-4 is the compact SUV model that will be making its Japanese premiere and is equipped with the automaker’s next-generation 4WD system ALLGRIP and will be launched in Europe in 2015.\nThen there’s the Hustler, a crossover-type concept built to suit the active lifestyle of people who love nature and sports. With a stylish yet practical design, the Hustler features plenty of SUV touches combined with exterior styling that looks like it belongs in the outdoors.\nLastly, there’s the Hustler Coupe which is another variant of the Hustler concept to show off the versatility of the platform and the possibilities if Suzuki was to move forward with production.\nGALLERY: Suzuki 2013 Tokyo Motor Show Concepts\nDiscuss this story at our Suzuki forum.", "label": "Yes"}
+{"text": "HONDA PCX MANUAL ENGLISH\nHONDA PCX OWNER'S MANUAL Pdf Download.\nON-ROAD USE This scooter is designed to be used only on the road. READ THIS OWNER’S MANUAL CAREFULLY Pay special attention to the safety messages that appear throughout the manual. Page 3 OWNER’S MANUAL All information in this publication is based on the latest production information available at the time of approval for printing. Honda[PDF]\nHonda Motor Co., Ltd. 2009 --ll\nHonda WW125/S PCX OWNER'S MANUAL + All infonnatiol1 in this publication is based 011 the latest production information available at the time of approval for printing. Honda Motor Co.,Ltd. reserves the right to make changes at any time without notice and without incurring any obligation.\nHONDA PCX125 OWNER'S MANUAL Pdf Download.\nView and Download Honda PCX125 owner's manual online. PCX125 Scooter pdf manual download. Also for: Ww125, Ww125s, Ww125spcx. Scooter Honda PCX Owner's Manual (147 pages) Scooter Honda PCX150i Owner's Manual (146 pages) Scooter Honda PCX150 2013 Service Manual\nHonda PCX 125 150 Online Scooter Service Manual - Cyclepedia\nHonda PCX 125 150 Online Scooter Service Manual The Cyclepedia Honda PCX125 and PCX150 scooter online service manual features detailed full-color photographs and color wiring diagrams, complete specifications with step-by-step procedures performed and written by a veteran Honda dealer trained motorcycle technician.[PDF]\nHonda PCX150i Owners Manual - ProductReview\nPay special attention to the safety messages that appear throughout the manual. These Honda PCX OWNER’S MANUAL Official Honda Shop Manual to help you perform many maintenance and repair tasks. Pleasant riding, and thank you for choosing a Honda ! WELCOME\nHonda PCX 150 2018 user manual - Motorcycles in Thailand\nFeb 22, 2020Yeah, I got a new Honda PCX 150 and I like it a lot. Trouble is, the dealer here in CM only has user manuals in Thai, but I need one in paasaa Angrit. Does anyone have a line on where to pick on up? And yes, before you answer, yes, I searched for it on this site. :) And yes, I checked the English..Yeah, I got a new Honda PCX 150 and I like it a lot. Trouble is, the dealer here in CM only has user manuals in Thai, but I need one in paasaa Angr..https://wwwalslib/download/800498/Honda-Pcx150i^ Yeah I found it on-line at the fist attempt. OP should try harder!\nOwners Manual for | Honda | Honda Owners\nA printed Owner's Manual, Navigation Manual, and Warranty Booklet are complimentary to the first registered owner, up to six months after vehicle purchase. These manuals require a valid VIN and mailing address. Order now. To purchase printed manuals, you can order online or contact:\nOriginal Smart Key for Honda PCX 150 - Guide - YouTube\nDec 28, 2016REAL-TIME GPS TRACKER INSTALLED ON HONDA PCX | EVERY MOTORCYCLE SHOULD HAVE THIS (TAGALOG) - Duration: 20:27. RedSweetPotato Recommended for you\n2020 PCX150 OVERVIEW - Honda\n2020 PCX150 OVERVIEW - Honda Urban riding is full of challenges. There’s heavy traffic, tight parking and plenty of stoplight-to-stoplight action. Fortunately, the Honda PCX150 is purpose-built to tackle these challenges and deliver loads of fun along the way. With our V-Matic transmission, you get start-up-and-go riding without ever needing to shift.\nHonda scooter PCX-150 | Start Engine with Smart Key - YouTube\nJan 06, 2018Honda scooter PCX-150 | Start Engine with Smart Key Cars Club. Honda PCX 150 Tutorial Penggunaan dan Seting Keyless l Test Ride Review l GridOto English\nRelated searches for honda pcx manual english\nhonda pcx 150 manualhonda pcx 150 service manualhonda pcx 125 service manualhonda pcx 150 owners manualhonda 150 pcxhonda 125 pcxhonda pcx electric2015 honda pcx 150 manual", "label": "Yes"}
+{"text": "Watch This Ford Mustang Completely Wipe Out During a Dangerous Street Race\nThe American muscle car appeared to be racing a Mercedes-AMG A45 on a busy South Korean street when he lost control.\nIt appears that destroying Ford Mustangs in illegal and ill-advised street races isn't strictly an American pastime. As we can see in this video from a street race gone wrong in South Korea, this kind of nonsense behavior is a global phenomenon.\nBrought to our attention on Reddit, onboard video of a Mustang driver dangerously racing what appears to be a Mercedes-AMG A45 on a busy Seoul street in broad daylight shows what happens when common sense goes out the window. However, this particular piece of footage and the story behind it makes it even more mind-blowing, and not in a good way.\nAfter reaching speeds of up to 110 miles per hour, running four red lights, getting perilously close to a crossing pedestrian, and a brief venture into the oncoming lane, this brazen Dom Toretto wannabe loses control of his steed and violently hops the curb, smashing the muscle car into a tree and parked motorcycle, completely knocking down the former.\nDespite the exotic-sounding surname in my byline, no, I am not Korean and no, I do not know what the dudes in the video are saying. But, a number of Redditors that apparently do understand the language say the onboard audio paints an even more incriminating picture than the visuals alone.\nAccording to the comments, the 24-year-old driver of the Mustang said the entire stunt was \"a bet with his friend\" and that he will \"run all red lights at the start and won't care if he crashes.\" One Redditor points out the sound of the driver trying to start the car after the collision and drive away, while another commented the following translation: \"We gotta run. His friend can’t find his shoe lol and he's like dude we gotta go now.\"\nHow do you say \"play stupid games, win stupid prizes\" in Korean?", "label": "Yes"}
+{"text": "Information about owners of cars: names, addresses, phone numbers and VINs\n1550 Mansell Rd, Alpharetta, GA 30009-4709\nP: (404) 319-5888\n1735 Kanawha Trl, Stone Mountain, GA 30087-2139\nThis car is awesome. I still don't know why Bentley has such expensive cars but hey, it beats others!\nby Bentley Guy on October 3, 2015", "label": "Yes"}
+{"text": "Finance the 2018 Mazda CX-9 GS from $117 weekly at 3.0% for 84 months with $0 down.\nPlus, get a $3,000 cash purchase discount.\nOn finance price from $38,420. Taxes extra.\nSome conditions apply. This offer ends on July 31st, 2018.\nBook your test drive today!\nMazda 50th Anniversary Bonus Offer is available to qualifying retail customers who cash purchase/finance/lease a new and previously unregistered, in-stock 2017, 2018 or 2019 Mazda model from an authorized Mazda dealer in Canada between July 4-31, 2018. Anniversary Bonus Offer value of $300 for 2018 Mazda3/Mazda3 Sport, 2018 Mazda6, 2018 & 2019 CX-3, 2018 CX-5; $750 for 2017 Mazda6, 2018 MX-5/MX-5 RF & 2018 CX-9; $1,000 for 2017 MX-5 RF. Anniversary Bonus Offer will be deducted from the negotiated price before taxes. Some conditions apply. See dealer for complete details.", "label": "Yes"}
+{"text": "Arumbalana hope this can help you to acquire yor objective cars next your budget. Most Reliable Used Cars Under 2000 most reliable used cars under 2000 dollars most reliable used cars under 2000 near me For More info check at Arumbalana\nShop vehicles for sale under $2000 at Cars.com. Research, compare. View all 161 Used Vehicles in stock · See all 20 photos. .. Good Deal. Ext. Color: Other .\nFind the best used car under $2000 near you. Every used car for sale comes with a free CARFAX Report. We have 1130 used cars under $2000 for sale that are .\n. or premium choices. Here then is our pick of the best used cars on a budget.. And being a Honda you can expect top-notch reliability into the bargain. . Next.\nHere are the top used car listings for sale under $2000. View photos, features and more. What will be your next ride?", "label": "Yes"}
+{"text": "Greg Powell is amazing! Best salesman I've ever worked with in my many car purchases! He's friendly, personable, and most importantly not pushy!!! They're in Arlington which is a bit of a drive from Cleburne, but I wasn't happy with the treatment I received the one time I visited the Mazda dealership in Fort Worth, and with the deal they were offering on a certified pre-owned Mazda 6 it was worth it to go check them out. And I'm very glad that I did!!!\nService like a luxury dealer. Staff is attentive but not overbearing. They are informative and will let you know your options. As a first time VW owner, I was very impressed. I didn't even but my car from them. I actually drove 40 minutes for their service (when I live 12 minutes from another dealership). Anyway, Mr Mo Q. took great care of me. I was able to get some work done in the waiting area while I waited (appreciate the wifi). I'll say this. I do a lot of reviews. I believe they are helpful to both the customer and business. If I give a 1 🌟, a business is really bad. At the same time if I give a 5 🌟, the business really deserves their credit. I don't evaluate emotionally and try to be fair realizing everyone's experience is different. I observed the service staff as people came in and went out. It is of my opinion that Hiley purposely strives for top notch customer experience.\nI had a very specific car in mind that Metro Volkswagen had in stock. I called and Jonathan answered. He was very professional over the phone and more so in person. He had the car ready to test drive before I arrived. He was very knowledgeable about every feature on the car. I was looking for a Jetta TDI and this one was the absolute cleanest one I had seen. I had already test driven 4 others at other dealers. After deciding to buy, I was there less than a half hour to finish up the paperwork and had the keys in my hands. Best experience I’ve ever had buying a car!\nBest experience I???ve had in car shopping with Hector\nby Skywalker69 from DealerRater.com\nAugust 21, 2018\nOur sales person was Hector and the experience of purchasing a car through Volkswagen Honda is one of the best experiences that I???ve ever had and I would most definitely buy another car there again Hector was great\nAwesome service great prices. Great people. Travis was awesome go see him you will be happy. Travis helped me answered all my questions Finance Manager Sal was friendly and completed my paperwork in a timely manner.\nGenuine Salespeople to help in every way possible!\nby J123 from DealerRater.com\nAugust 13, 2018\nJannett at Rusty Wallace VW is truly a great salesperson. She helped us for 6 months to find the perfect car. We live 90 miles from their dealership. Jannett was always accessible and willing to give honest advice. We ended up finding a car closer to us, but Jannett was supportive throughput the whole process and was genuinely happen that we found what is best for us! We will definitely come back to Jannett! She is honest, hard working, accessible and very knowledgeable!\nSingle handedly the best car buying experience. Our sales representative, Jannet Gonzalez, was extremely attentive and made sure to disclose all the details of the sale right up front. This was so refreshing because usually there are so many hidden charges that you don't find out about until you get into financing. She really changed my opinion about the car buying process and we will definitely be repeat customers. Thank you so much to Jannet and the Rusty Wallis team for making our car dreams come true!\nIf you are looking to do business with real people instead of slick sales people, this is your place! I just purchased my 4th VW and my original purchase was back when this location was owned by Boardwalk which was an amazing group of people and always felt like you were doing business with friends. I haven't experienced the same level of personality and/or service since Boardwalk until now. This new management and staff at Clay Cooley VW was SUCH a pleasure to do business with. Every single person I encountered went out of their way to accommodate me and interact with me in such a positive way. My salesman, Darius was simply amazing. So personable, friendly, understanding, and kind. The finance director, Jimmy, did EVERYTHING he could to make my deal work and went over and above for me. I honestly felt like I was doing business with friends and I am once again excited about the group of people at this location! Give them a chance and ask for Darius - you will be so glad you did!\nBy far, this was the best car buying expirence I had and it was all because of Janet Gonzalez! She had the vehicle waiting on me when I arrived. After the test drive, I decided I was going to purchase the veichle. While working on the terms, she was receptive to my financial goals and helped get the deal done. Will buy from her again!\n* Title, other fees, and incentives are not included in this calculation, which is an estimate only. Monthly payment estimates are for illustrative purposes only and do not represent a financing offer from the seller. Other taxes may apply.\nThe information on vehicles provided in this service is supplied by the seller or other third\nparties; Cars.com is not responsible for the accuracy of such information. Cars.com provides\nservice and materials without representations or warranties of any kind, either expressed or\nSee our terms of service for more details.", "label": "Yes"}
+{"text": "The pride of being the fastest car in the world is much than that of a king. It officially gives a car the permission to kick every one’s but who challenges the car. And moreover the car is labeled as Queen of the Roads. The McLaren F1 has been also one of the cars to go under this title. By now three different cars have attained speeds higher than the McLaren F1 but still it stands as the fastest car in the world running on a naturally aspirated engine.\nThis has been the best feature of the McLaren F1 that by far it has used the best naturally aspired engine. The basic motto of the designer’s during creation was: “Low weight, high power.” The weight was kept low by the use of carbon fiber, titanium, and magnesium and even gold too. The McLaren F1 was basically a trend setter in the world of cars. You might be surprised that the culture of using a carbon fiber monocoque chassis was started by the McLaren F1. The McLaren F1 had indicators on its mirrors. This concept was also to be applied in the future by many automakers.\nAs the fastest car of the world McLaren did not disappoint any of the customers. The F1 delivers speed through a custom made 6.1 L V12 engine. The engine block was made entirely of aluminum too. At 5600 RPM the engine was able to produce 627 hp. The redline limit of the F1 on the rev meter was at 7500 RPM. This engine was able to produce enough power to enable the McLaren F1 to reach 0 to 60 mph in 3.2 seconds. No matter how old the McLaren F1 will get it will always get the respect and pride as always.", "label": "Yes"}
+{"text": "- Florida is tied for fifth most deadly state in the nation for traffic deaths\n- Nearly 2,000 have died on Florida roads in the first half of 2022, third highest in the nation\n- After adjusting for vehicle miles traveled by its populace, Florida has recorded 1.58 deaths per 100 million vehicle miles traveled\nTraffic deaths are on the rise in the United States, according to a recent report from the National Highway Traffic Safety Administration. An estimated 20,175 people were killed in motor vehicle crashes from January through June 2022, the most in the first half of any year since 2006.\nThe latest increase in traffic fatalities comes as Americans are spending more time on the road. U.S. drivers traveled 43.2 billion more miles in the first half of this year compared to the same period last year.\nThe recent increase in traffic fatalities is a continuation of a troubling long-term trend. Deaths on American roads rose for seven consecutive quarters, from mid 2020 to early 2022. A recent survey conducted by the AAA Foundation for Traffic Safety found that the trend is partially the result of rising instances of risky behavior among motorists – including speeding, distracted driving, and driving under the influence of alcohol.\nSome states stand out for having especially high traffic fatality rates so far this year. According to the NHTSA, there were an estimated 1,951 traffic fatalities in Florida in the first half of 2022, the third most among states.\nAfter adjusting for vehicle miles traveled, Florida – along with Delaware and New Mexico – has the fifth highest traffic fatality rate in the country – with 1.58 roadway deaths for every 100 million miles traveled. For context, there were an estimated 1.27 deaths per 100 million miles nationwide in the first half of the year.\n|Rank||State||Traffic deaths per 100M VMT, first half of 2022||Total traffic deaths, first half of 2022|", "label": "Yes"}
+{"text": "Thanks in part to the addition of front crash prevention technology, the Insurance Institute for Highway Safety named the redesigned-for-2016 Volvo XC90 a Top Safety Pick Plus, its highest crashworthiness rating. The three-row SUV earned scores of good across the board for 2015, enough for a Top Safety Pick designation, but the previous generation didn't offer the Swedish automaker's City Safety auto-braking system. The feature not only comes standard on the 2016 XC90, but the upgraded version now functions at higher speeds than before, earning the system the best possible rating of superior.\nRelated: 2016 Volvo XC90: First Drive\n\"In IIHS track tests at 12 mph and 25 mph, the XC90 avoided collisions,\" the agency said in a statement. \"The system also includes a forward collision warning component that meets criteria set by the National Highway Traffic Safety Administration.\"\nLike its predecessor, the 2016 XC90 earned ratings of good in all five IIHS crashworthiness evaluations, including small and moderate overlap front, side, roof strength and head restraints. IIHS noted that in the stringent small overlap test, driver space held up very well, with less than 2 inches of intrusion at all points measured, while the crash dummy's head movement was well-controlled, and the front and side curtain airbags worked well together to protect the head.\n\"Measures taken from the dummy showed a low risk of any significant injuries in a crash of this severity,\" IIHS stated.\nThat improved safety won't come cheap, however. The previous version of the XC90 started at $40,625, including a $925 destination charge; the 2016 model starts at $50,795 with a $995 destination charge. For that extra 10 grand, however, buyers get standard all-wheel drive, a new eight-speed automatic transmission and significantly improved fuel economy from its 316-horsepower, turbocharged 2.0-liter four-cylinder engine, improving to 20/25 mpg city/highway from the 16/23 mpg of the previous all-wheel-drive version's 240-hp, 3.2-liter six-cylinder.", "label": "Yes"}
+{"text": "How fat Americans are thwarting car makers' attempts to make cars more fuel efficient\nAmericans are gaining weight, and cars are losing it - causing the auto industry's efforts to increase fuel-efficiency to go nowhere.\nFederal regulators and high gas prices are causing car manufacturers to create lighter, more efficient cars, but the waistlines of drivers are preventing any advancements, Allstate says.\nThe company says that 1 billion gallons of gasoline were burned each year between 1960 and 2002 because of heavier passengers; Americans weigh 20 pounds more now than they did in 1990.\nFor every additional 100 pounds, a vehicles' fuel economy drops 2 per cent.\nAllstate created an infographic that describes the complex struggle between fuel efficiency and passenger weights and the industry's efforts to curtail costs in an effort to explain how difficult it will be to meet the federal fuel efficiency target.\nThe U.S. government has asked that all vehicles have an average 54.5 miles per gallon by 2025.\n'But even as the automotive industry goes to extremes to shed weight to meet these rules, heavier drivers are adding unexpected pounds,' Allstate said on its blog.\nMost watched News videos\n- Mariah Carey sings during billionaire's granddaughter wedding\n- Bike crashes into back of car after car drivers reckless antics\n- SBS explores diversity in experimental dating series Undressed\n- Kitesurfer unaware of great white shark swimming below\n- Huge 4m crocodile slithers down the rapids in Northern Territory\n- Shocking moment huge alligator walks near group of tourists\n- It's a drop off!: Tow truck driver knocks SUV off high cliff\n- Father left bloodied after dads of teenage footballers fight\n- Pakistani singer stops concert to save a girl from harassment\n- Gloria Williams waves extradition for kidnapping Kamiyah Mobley\n- 'Let meow-t!': Cat appears to make door-opening gesture with paw\n- Enraged kick-boxer strikes husband's mistress NINE times", "label": "Yes"}
+{"text": "Audi of Albuquerque is offering this 2014 Audi SQ5, in Volcano Red Metallic and Black Leather, low miles, only 37626 miles, Bang & Olufsen Sound System, SQ5 Premium Plus quattro, quattro, Adaptive suspension, Audi Connect w/Online Services, Audi First Aid Kit, Audi MMI Navigation Plus Package, Audi Parking System Plus w/Rear View Camera, Audi Side Assist, High intensity discharge headlights: Bi-xenon, Power moonroof, Radio: Audi MMI Plus System w/6.5\" Color Screen, Sport-Contoured 3-Step Heated Front Seats, Supercharged Badges, TFT Color WVGA Display Screen, Wheels: 8.5J x 21\" 5-Double-Spoke Star-Design. Odometer is 16290 miles below market average!\nOur sales staff has 48 years of combined experience\n\"The true Porsche experience starts here.\"\n\"Excellent, knowledgeable sales staff.\"\nAbout Porsche of Albuquerque\nPorsche is the ultimate in automotive performance. Renowned the world over for the way our drivers connect to the roads they travel, Porsche has a long history of innovation unlike any other. Porsche is high-functioning design that exceeds performance expectations in every model. At Porsche of Albuquerque, we retain the best certified sales professionals, the most highly trained service technicians in the industry, and a passionate commitment to customer care. We value our relationships with our customers, and welcome you to visit the dealership. Located just off I-25 at 8900 Pan American Freeway NE, we look forward to seeing you soon.", "label": "Yes"}
+{"text": "With the increasing number of car insurance companies in this country, some people who have just bought a car for the first time sometimes face a difficult situation when they have to choose the right car insurance policy for their car because they do not know what it is about. If you see yourself as one of those people, you might need to read this short and brief article because it will give you some brief overview about the policies that you can get from a car insurance company. The policies that I am about to give you might not be all of the policies, but I think it will be enough for you to know the most common ones.\nThe first coverage policy is the comprehensive coverage policy. This kind of policy will protect you and your car from some losses which are not related with car accident. Using this kind of policy, you do not have to be afraid when your car is stolen by some bad guys or if your car becomes a victim of vandalism. The second common coverage is the collision coverage. In this type of coverage, the amount of money that you will pay if you are sued by the victim of car accident caused by you will be covered.", "label": "Yes"}
+{"text": "The companies said that Germany's Volkswagen and Franco-Italian chipmaker STMicroelectronics will co-develop a new semiconductor amid a global microchip crunch that has strained the car industry's supply chain.\nThe move illustrates how Volkswagen, Europe's biggest carmaker, is striving to gain greater control over the supply of chips, found in an ever greater number of new generation and low-carbon emission vehicles.\nIt is Volkswagen's first direct relationship with second-and third-rank semiconductor suppliers, a move executives have hinted at since the chip shortage hit the auto industry in late 2019.\nVolkswagen software unit Cariad said in May it would also source system-on-chips from Qualcomm for autonomous driving up to Level 4 standards, in which the car can handle all aspects of driving in most circumstances with no human intervention.\nA Cariad spokesperson said the new deal would not affect this partnership.\nNeither party disclosed the financial implications of the deal, which makes STMicroelectronics one of Volkswagen's top technological partners.\nThe companies said in a statement that they are set to co-design the new chip, which will be part of the Stellar microcontroller family of semiconductors.", "label": "Yes"}
+{"text": "Originally Posted by Tsuyoi\nBut see those are racing gloves. OP wants fashion gloves to go with his interior for day to day.\nMine are black and saddle brown though...\nAlso OP - you don't match the gloves to your car. You match to your belt/boots or jacket/pants.", "label": "Yes"}
+{"text": "Sign up / Sign in\nBrowse over 9,000 car reviews\nFamily focused reviews and advice for everything family car related.\nOff-road for beginners and the experienced, plus camper trailers, caravans and motorhomes\nUtes, commercial vehicles and tow tests\nWe make it easy to compare design, practicality, value and more\nBuying used? Here's what to look out for and buy smart\nSee our CarsGuide car of the year award winners and finalists\nOur experts pick the top models\nWhat's happening in the automotive world\nOur blog for car nuts and speed readers\nGet to know the personalities behind the team every week\nThe stars of the latest big events\nThe most interesting hints of what's to come\nWhat's been recalled and why. Are you affected?\nThe latest and future car tech from around the world\nWe're here to help you with any car issues\nLooking for tips on how to carry or travel with your family?\nHow To, off-road tips and adventure travel destinations\nNot just utes. Detailed advice for you - the tradie - on what car is right for you and your job\nLooking for an answer? Our automotive experts are here to help\nIf you're wondering, we've probably got the answer\nUnsure of your car's maximum towing capacity? We've listed all relevant models here.\nWondering how much air to put in your tyres? Our database has the answer\nEverything you need to know to keep you and your family as safe as possible\nHelpful advice before you finance your next car\nTips for getting the right insurance and how to make a claim\nEverything you need to know when sizing up your new car\nBuild knowledge, gain experience and sharpen your skills with the ultimate adventure-travel resource.\nNot just utes. Detailed advice for you - the tradie - on what car is right for you and your job.\nFrom e-bikes to Uber, EVs to public transport; your resource for reviews, news and advice focusing on urban lifestyle.\nBrowse over 9,000 car reviews\nSorry, there are no cars that match your search\nSorry, there are no models that match your search\nBullet proof D-max, Features include roof racks, steel bulbar, manual transmission, crusie control,...\nNew arrival! Currently undergoing our extensive 100 point safety checks. Enquire now and we'll keep ...\nHard working double cab with the powerful and economical 3.0 litre turbo diesel engine, six speed ...\nONE OWNER FROM NEW IN AS NEW CONDITION, FEATURE PACKED UPSPEC LS-U MODEL, FULLY WORKSHOP APPROVED, ...\n2017 D-MAX LSU 4X2 DIESEL AUTOMATIC....LOW KM'S....CLIMATE CONTROL....ALLOYS....SAT NAV....CRUISE ...\n2017 ISUZU 4X4 MUX LS-U DIESEL AUTOMATIC TRANSMISSIONFITTED RHINO-RACK ROOF BARS WITH KINGS ...\n2017 ISUZU MUX LS-T 4X2 DIESEL. Top of the range 7 Seater with full service history and 2 keys and ...\nWant comfort? Look no further with this Isuzu D-Max that comes with leathers seats, Sat Nav, Key ...\n2017 100th Anniversary Limited Edition Isuzu X Runner in excellent condition.\nVehicle is registered ...\n2017 ISUZU D-MAX 4X4 AUTOMATIC CREW CAB TRAY TOP UTILITY- - - - - - - - - - READY FOR IMMEDIATE ...\nSell your car for free today\nEasy to list in a few simple steps", "label": "Yes"}
+{"text": "2018 Alfa Romeo Stelvio Ti\nPresenting a local San Francisco Bay Area Stelvio Ti with a scant 1k miles. Finished in Stromboli Gray with Espresso Leather Seating, this Q4 shows no signs of previous damage or repair, and presents as new. It is extremely well optioned with all Ti options, 19\" Sport 5-hole Alloy Wheels ($500) and Convenience Package, ($200). Further options include Harmon/Kardon Audio ($900), 3D Navigation with Bluetooth Radio and 8.8 Inch LCD Display ($950), Driver Assistance Static Package w/ Side Blind Spot and Rear Cross Path Detection ($650), Compact Spare Tire in place of inflation kit. All paint is original to the factory, and both the paint and wheels show no blemishes, scratches or scuffing. All books, manuals as well as both master keys are present. Original MSRP was just under $50k.", "label": "Yes"}
+{"text": "Table of contents\nHow much is car insurance in Frederick?\n|Area||Average Monthly Car Insurance Premium|\nThe cost of coverage in Frederick is about $53 a month cheaper than it is for the rest of Maryland.\nWhen stacked up against the national average, the average monthly policy payment for Frederick is more affordable. The average monthly payment in Frederick is about $13 less than the rate for the rest of the United States.\nBear in mind that while these rates are the average costs for drivers in Frederick, it doesn't mean that's what you'll pay. There are a number of factors that determine how much insurance companies might charge you for your insurance policy. Your bill each month is calculated off of your age, gender, vehicle make and model, driving record, and in some cases, your credit score.\nWe've broken down the average rates for Frederick to help you understand what exactly you might be asked to pay. And if you're not sure that you're paying the lowest option, simply enter your ZIP Code below and find out!\nAverage Car Insurance Rates by Age\n|Age Range||Average Premium|\n|Under 18||Not Enough Data|\n|45-54||Not Enough Data|\nGenerally, the older you are, the more experienced you are on the roads, right? That experience can really work in your favor when factored into your car insurance rates. As you can see, 18-24-year-olds pay two times as much as someone who is retirement aged.\nFor every 10 years, you can expect to see a drop in your monthly premium. That said, once you hit retirement age, your rates may climb back up a bit in Frederick.\nAverage Car Insurance Rates by Gender\nCar insurance rates for women are generally cheaper than they are for men. The difference in Frederick is about $5 per month. As you can see in the chart above, car insurance for women in the area typically costs around $64 each month, while men pay $69 on average.\nAverage Auto Insurance Rates by Driving Record\n|Infractions||Average Monthly Premium|\nYour driving record can have a huge impact on your car insurance rates. Drivers who avoid accidents and tickets will pay much lower rates than those with infractions. Drivers in Frederick with one accident will pay around $78 a month. Similarly, if you have one ticket on your record, you will be looking at an average rate of around $84.\nAverage Insurance Rates by Vehicle\n|Vehicle Age||Average Monthly Premium|\n|Less Than 1 Year||$74|\n|15 Years or Older||$60|\nAccording to the first table above, trucks and vans are by and large the cheapest vehicles to insure in Frederick, with drivers paying around $60 per month for insurance coverage.\nCar owners can expect to pay an average of around $67 a month for their policy, while SUVs usually cost around $71 a month to insure.\nIn addition to vehicle type, you can also expect to see slightly different rates based on how old your vehicle is. Newer vehicles are generally going to be the most expensive to insure. However, once your car is a few years old, you may start to see your monthly premium decrease. In Frederick, the most expensive vehicles to insure are vehicles four-to-five years old.\nAverage Car Insurance Rates by Relationship Status\n|Relationship||Average Monthly Premium|\n|Single (never married)||$72|\nGenerally, car insurance is slightly cheaper for married policyholders. This can usually be attributed to their policies having multiple vehicles, a factor many companies extend special discounts for.\nOn a national scale, single drivers typically pay more than married couples do for auto insurance. Frederick is no exception, with the difference totaling to around $13 a month.\nAverage Car Insurance Rates by Housing Situation\n|Housing Status||Average Monthly Premium|\n|Live with parents||$72|\nAnother factor that comes into play is your housing situation. Renters can expect to pay around $9 a month more than drivers who own property in Frederick. But those who live at home with their parents can expect to pay significantly more.\nMany companies, however, will offer you a discount to bundle your home or rental insurance with your auto insurance policy, which can help reduce your car insurance premiums.\nCar Insurance Companies in Frederick, MD\nRecent trends in car insurance for Frederick drivers\nGiven that average rates are often changing, it's a smart move to know the direction your area is trending before picking an insurance policy.\nThe cost of insurance in Frederick rose from 2016-2017, before steadying out in 2018. They had been increasing again, hitting a high of $89 in 2020, and finished down at $70 in 2021.\nHow does Frederick compare to neighboring areas?\nWhy are car insurance rates in Frederick different from other areas?\nWhen considering how much to charge for a monthly rate, car insurance companies will consider a lot of factors. While we've discussed the ones that affect your personal policy, others are based around your home address. These include things like:\n- Area laws\n- Availability of off-street parking\n- Total number of drivers in the area\n- Local crime rates\n- Road Safety (frequency of car accidents)\nWhile you won't have the ability to change these factors yourself, they can be handy to keep in mind when seeking a new policy or considering a move. Different towns and cities will all have different average rates, so guides like these are a great place to get started.\nHow can I find the cheapest car insurance in Frederick?\nEquipping yourself with information about the average costs for drivers in your area will better prepare you for the real deal. The only way to know for sure what your rate will be is by asking for a quote from car insurance companies.\nBut wait! Compare.com does all of that work for you. Just punch in your ZIP below, answer a few questions about you and your car, and you'll be comparing the cheapest quotes from a bulk of the car insurance companies that offer auto coverage in Frederick.\nFrederick Insurance FAQs\nWhat factors affect car insurance quotes in Frederick?\nAuto insurance companies take a wide array of factors into consideration when calculating your monthly payment. These include things like your vehicle's year, make and model, your gender and age, as well as your driving record, credit score, marital status, and address.\nWhy is the cost of car insurance in Frederick different from other neighboring cities?\nCrime rates, local laws, and parking situations -- all of which can change from city to city -- play a large role in the rates that car insurance companies may charge for coverage.\nWhich car insurance company will offer me the cheapest rate in Frederick?\nThere isn't one company that can guarantee the cheapest rate to everybody, since the rates they charge for coverage are calculated based off of factors that can vary from person to person, such as vehicle make and model, driving record, and number of drivers on the policy. By using sites like Compare.com to compare multiple quotes simultaneously, you can rest assured that you're getting the best price available.\nDo I need to change my insurance if I move to Frederick?\nAny major life event, whether it be moving to a new area, finding a new job, getting married, or any other notable event always presents a good opportunity to re-evaluate your current insurance policy. Regardless of your previous rate, there may be cheaper options in your new location, so it's a good idea to use services like Compare.com to compare quotes from dozens of companies side-by-side.\nDo I need to wait for my policy to expire to switch to a different car insurance company?\nNo, you can switch companies at any point, no matter how much time is left on your current policy. If you're thinking about moving to Frederick or are wondering if you're paying the best rate for your current area, take 10 minutes and visit Compare.com to find out for sure.", "label": "Yes"}
+{"text": "WELCOME TO SCRAP A CAR WALES.\nWe offer cash for cars, 4x4 jeeps and commercial vehicles, non runners, MOT failures, stripped and\ndamaged vehicles bought 7 days a week, cash on collection and DVLA paper work completed\nproperly and stamped.\nWe also buy vehicles that are better than scrap condition, we purchase vehicles to use for banger\nracing and spare parts for this sport, so get in touch whatever you have, we can offer a fair deal and\ntake it off your hands regardless of condition.\nWe offer a friendly fast service and make sure its all done legally with the correct DVLA paper work\ncompleted so you have no worry of Joe Bloggs coming along taking your vehicle and you end up with\na fine from DVLA plus we give you an invoice (receipt).\nWe do not collect scrap metal only vehicles or vehicle related items such as garage equipment /\nWe also undertake vehicle collection delivery of bikes cars and commercials", "label": "Yes"}
+{"text": "Greensboro, NC -- Car complaints make the top 10 list for the NC Attorney General's Office every year.\nJessica Heironimus, an expert in auto issues with the Consumer Protection Department of the AG's office joined 2WTK by Skype to talk about the top car complaints and how to avoid them.\nCARS SOLD \"AS IS\"\nA common misconception is there is a cooling off period and there is not so if someone buys an as is car, it means the dealer is not providing a warranty for that car and as soon as you sign the paperwork , the car and any mechanical problems it has becomes theirs.\nConditional delivery means that the dealer is arranging financing for you but they don't have it secured at the point at sale. T he consumer leaves the lot with the car and they could hear from the dealer days later or even weeks later. When the dealer says they have to bring the car back, it's often a shock.\nThe consumer may have had a trade in. The dealer may have sold the trade in and can't get it back, the dealer may say your down payment is no good because you have used of the vehicle, that's not true! They do have to get the trade-in back, they do have to give the down payment back.\nThe conditional delivery is actually legal. But the dealer is supposed to keep their own insurance, the trade and the down payment should be returned if the deal falls through.\nWhat a good dealership will do is they will have a separate paper that clarifies what the conditional delivery entails for the consumer.\nThe only way to completely sidestep a conditional delivery is to have your own financing when you step on the dealership grounds.\nBUYING A CAR WITH AN ACCIDENT HISTORY\nIf a car is 5 years old or newer the dealer is supposed to disclose if there was more than 25%damage to the car-if they know it. If they get the car from a trade-in or from an auction, they may not know the history. Yes, it seems as if they SHOULD, but they may not.\nThe AG's office recommends pulling the Carfax report. Carfax is a pretty good indicator, but it's not 100%. The report should detail if a police report or insurance report has been made on the car.\nTHE PRE-PURCHASE INSPECTION\nThe best thing you can do for yourself to avoid any mechanical problems or getting caught with a wrecked car is to take it for a pre-purchase inspection. That means you take it off the lot and a certified mechanic looks at it. Often time people take it to a certified dealership, it costs about $85.\n\"If the consumer hasn't signed any sales paperwork and if they haven't given the dealer any money, they can take that car back to the dealership and say I don't want this car, I'm out .\nWALK AWAY FROM THE CAR\nIf there are any indicator light are on the car they should walk away. I'm always surprised when people say the check engine light was on but I bought it anyway. If there are any indicator lights on, regardless of what the dealership tells you, it's a serious problem and you should walk away.\nALWAYS GET AN ESTIMATE FOR REPAIRS\n\"They should always get a written estimate on repairs. It may start as a nice conversation with the mechanic, but it there is a dispute you have no paperwork you only have he said-he said to support your case. Always get it in writing", "label": "Yes"}
+{"text": "MAN to carry out checks on D26 engines15 April 2015\nMAN Truck & Bus UK says it is writing to all customers this week who have a Euro 5 truck with D26 engine, so that a maintenance check can be carried out on the exhaust gas recirculation (EGR) system.\nOperators will be asked to book their vehicles in for the check, which MAN describes as a \"precautionary measure\".\nThe move follows some problems last year with D26 engines, all of which were repaired or replaced free of charge.\n\"While we have no reason to believe that any of these vehicles are affected by an EGR cooler or high-pressure intercooler issue, our decision to ask all Euro 5 EGR owners to book their vehicles into our workshops demonstrates our commitment to minimising potential business downtime,\" says a MAN spokesperson.\nThis material is protected by MA Business copyright\nSee Terms and Conditions.\nOne-off usage is permitted but bulk copying is not.\nFor multiple copies\ncontact the sales team.", "label": "Yes"}
+{"text": "The Peugeot dealership is set to close its doors on Monday with 33 members of staff losing their jobs.\nAn administrator told the West Sussex County Times that the garage was another ‘victim of the recession’ and that the reason behind the closure was ‘purely financial’.\nHe added that customer orders were to be fulfilled by other local dealers as the dealership wound down and the site’s 100-car stock would be sold off before being sent to auction.\nThe local paper reports that the Broadbridge Heath Motor Co. closure is the second dealership failure in the area in just five months. Earlier this year Stevens Vauxhall was closed after management failed to find a buyer. The Vauxhall site had been selling cars from Horsham since 1963.\nThe news of another dealership entering administration smacks in the face of official figures from the SMMT which show new car sales have been RISING this year.\nIn 2012 new car sales have climbed steadily every month compared to 2011, however many dealerships are still struggling. Industry whispers suggest the statistics do not correlate with what’s actually happening on the ground.\nWhat do you think? Are industry figures misleading? Is it really far tougher out there than reports suggest? Let us know by commenting below or tweeting the editor @CarDealerEd.", "label": "Yes"}
+{"text": "AUSTIN, Texas, Feb. 10, 2016 /PRNewswire/ -- The Automotive Advertising Agency, an Austin based full-service creative agency serving the automotive industry, has selected Charles Thornton, formerly of CDK Global, to head the agency's Digital Media Group as Vice President Digital Marketing. Charles Thornton has over 18 years of senior management experience working with automobile manufacturers and dealerships, re-defining the digital sales and marketing processes to better align with the needs, wants, and expectations of the digitally empowered consumer. With CDK, Charles was responsible for digital strategy (including training) for Nissan North America. Charles' responsibilities included Reputation Management, Social Media, SEO/SEM and Advanced Digital Marketing.\nMarco Camacho, the Principal of The Automotive Advertising Agency, said, \"The first time I met Charles was in a client meeting. I was truly impressed with his knowledge and expertise. At that moment, I knew I wanted Charles on our team! His experience and intelligence will complement and add substantial muscle to the exceptionally talented team already in place here at the agency.\"\n\"Digital media represents a suite of powerful sales and branding tools for the automotive industry,\" explains Thornton, \"which experienced a record year in 2015. The Automotive Advertising Agency is positioned at the leading edge of service to an industry that is only now beginning to fully appreciate the power of digital and social media and I'm excited about the opportunity to bring my years of broadcast and digital media experience to such a progressive and forward thinking creative agency.\"\nThe Automotive Advertising Agency is a multi-cultural, full-service, Austin based creative advertising agency specializing in the automotive industry. Marco Camacho, the Principal at The Automotive Advertising Agency began his career in the automotive industry 3 decades ago and has a deep understanding and respect for what dealers face every 30 days. The team at the agency represents over 150 years of combined experience in broadcast television, cable, radio, Spanish language media, internet marketing, brand development, public relations, digital media and advertising. To contact Charles Thornton directly, call (817) 205-2189 or email at Charles@TheAutoAdAgency.com or for more information about The Automotive Advertising Agency visit www.theautoadagency.com or call 512-610-7300.\nSOURCE The Automotive Advertising Agency", "label": "Yes"}
+{"text": "Chances are there is a problem with a shift solenoid or the control module. WHat I need you to do is have the computer scanned. If the check engine light has been on, there should be a trouble code stored in the computer. Take the car to a nationally recognized parts store and have them scan it. Most will do it for free.\nAsk then what code or codes they found and let me know what they tell you.\nMonday, November 30th, 2009 AT 8:31 PM", "label": "Yes"}
+{"text": "I think the Nissan Leaf is a step in the right direction, on account of being a zero emission electric car. Strictly speaking, ‘zero emission’ is incorrect, in that the electricity for powering the car does not come about without emissions of CO2 into the atmosphere through the production of electricity in the first place. The car itself does not emit CO2 or other pollutants, but the production of electricity for charging the car’s lithium ion batteries does – even so-called eco-friendly solar or wind powered generated electricity is not emission free, because of the manufacture of the solar panels and wind turbines.\nDespite these drawbacks, the overall pollution brought about by the manufacture and use of electric vehicles must be less than their petroleum and diesel counterparts. The big practical disadvantage of electric vehicles is their limited range, as is the case with the Nissan Leaf, which at best can only achieve 100 miles on a full charge. Charging via a domestic circuit can take up to eight or nine hours. At public charging points the time is considerably reduced; it is claimed an eighty percent charge can be done in about thirty minutes.\nElectric cars perform as well as petroleum and diesel cars with one exception, that’s their limited range of about 100 miles, and until that limitation has been overcome, they will never be as popular. Another disincentive for buying one is the cost: a Visia at £16,490, an Acenta at £18,490, and a Tekna at £20,490.\nNissan Leaf Review\nNissan Leaf Prices, Models and Equipment\nAdvantages and Disadvantages of Wind Power", "label": "Yes"}
+{"text": "H9 Seat CoversShop H9 Seat Covers\nFor the Haval H9 Seat Covers available for excellent seat protection Custom Made for Perfect Fit available for the Ultra 7 Seater Model\nH6 Seat CoversShop H6 Seat Covers\nFor the Lux and Premium Badges of the Haval H6 Coverworld are able to offer perfect fit Australian Made Seat Covers\nH2 Seat CoversShop H2 Seat Covers\nFor the Haval H2 perfect fit seat covers are available to order online for the Lux, City and Premium Models.\nJolion Seat CoversShop Jolion Seat Covers\nJolion Seat Covers are avaialble for models from Feburay 2021 in all version of the Jolion SUV.", "label": "Yes"}
+{"text": "We can lament the passing of Mercedes M156 V8 6.2 liter until the end of time, but none of our moaning is going to stop the madmen of AMG or Mercedes from coming up with more modern, forced-induction mills like the twin turbocharged 5.5 liter V8, or this, the automaker’s new twin-turbocharged 4.0 liter V8. The freshly revealed mill will make its production debut in Mercedes-AMG GT, and based on the stats, it should prove a real honey.\nKnown as M178, the all-new turbo engine comes with party with 510 horsepower; however its big trick is the 479 pound feet of torque it deploys between 1750 and 4750 rpm. Engine, thy name is usable power. It can rev to the same 7200 rpm redline like the SLS AMG’s 6.2 liter V8, which means it should be a jolly good engine to wring out. Meanwhile, the two turbochargers can run to a maximum pressure of 17.4 psi and can spin to 186,000 rpm.\nThe powerplant’s measure isn’t limited to just its power output. In today’s world, it needs to be light. As per AMG, the 4.0 liter is just that, boasting a dry weight of just 461 pounds, thanks to an aluminum crankcase. AMG even cast an eye on the way the engine’s fat is distributed, fitting the turbochargers not outside the cylinder banks, but in what it calls the “hot inside V” configuration. That enables a more compact yet lower engine package whose weight is better distributed. Sound’s right!\nSound is arguably one of the AMG engine’s most important aspects, and in that important arena, the 4.0 shouldn’t disappoint. Set to be introduced in the Mercedes-AMG GT, the 4.0 engine will be teamed up with an exhaust, which integrates variable flaps that open and close depending on things like the throttle inputs and transmission mode. That should allow the GT’s new engine to balance the AMG sound we know and love with a mellow, quieter and more relaxed character in everyday driving.\nWe’ll have much more on both this engine and the car it will debut in, the Mercedes-AMG GT, in the coming months.\nImage Courtesy – Evo", "label": "Yes"}
+{"text": "Moving a V8 Supercars race team from place to place is a big job. Team 18 IRWIN Racing’s Colin Schwartz showed WTW around his office – about $3.5 million worth of Kenworth B-double\nA builder by trade, Colin Schwartz is a key man in the Team 18 IRWIN Racing V8 Supercars outfit. The Melbourne-based 37-year-old is responsible for transporting the team hardware, including spares, car, tyres, workshop equipment and even the driver’s on-track accom. V8 Supercars was a career that presented itself unexpectedly, and even then, Colin nearly didn’t take the job.\n“There was an adver t in The Weekly Times, a newspaper in regional Victoria, for a truck driver for a V8 Supercars team,” he remembered. “I rang up about it. I was on my way to the interview and thought, ‘I’m a builder. I’m not a racing-team truck driver’. So I ended up calling them up and saying, ‘Hey, thank you very much for the opportunity but I’m going to have to say no’.\n“A couple of days later they rang back and said, ‘We really want you to come in.’ So I sat down with them and had an interview and they offered me the job that night.”\nAs a youngster Colin had spent most of his time outside school on building sites with his father. He joined the South-Aussie-based family construction business the day after he finished school in 1998 and spent the next 12 years working around Australia before branching out from the family business and moving to Melbourne in 2010 for a spot with a commercial company.\nBut trucks were in Colin’s Genes.\n“There’s always just been something there that’s sparked an interest with trucks,” he mused. “My father was a truck driver in his younger years and had his own trucking business before he went into building. I guess it’s just one of those things that’s in the blood and we can’t do much about. I had to scratch the itch.”\nColin’s construction work took him all over Australia, and he often had to drive heavy vehicles as part of that work, but the truck he’s running these days is something really special.\n“It’s a T610 Kenworth,” said Colin, “and as a B-double it’s 26 metres long and somewhere between 55 and 60 tons.”\n“This year we’ve run the B-triple to two events,” he continued. “When we went from Melbourne to Perth it was with a B-triple, and we also did the Townsville round with the extra trailer.”\nFilling the tanks on the Kenworth is a bit of an eye-opener, too. Colin says the truck is ‘actually pretty economical’, but then, without blinking, he adds it gets between 2km and 2.2km per litre. Filling up means 1260 litres of diesel!\n“It makes it very expensive when you pull up for a hamburger and decide to fill up while you’re there,” smiled the easygoing driver.\nNaturally the packing of the trailers is tight and efficient. Colin has it by heart.\n“The A trailer – the front trailer – carries all the wheels and tyres,” he outlined. “It also has a computer for the telemetry system. We call that ‘The Datamahal’. It’s got all the fancy stuff that reads back from the car into the garage.\n“Then we’ve got a fridge with cold drinks, and there’s a little loft over the top with spare parts for the car and a fabbing bench, so if we do have an accident we can repair the car at the track.\n“And then the back trailer, the B trailer.\n“The front of the B trailer’s actually Mark Winterbottom’s driving room. He goes up there and relaxes. He’s got a TV and an airconditioner and just a seat with some benches so he can look at his data from his rounds.\n“The rear three-quarters or so of the trailer has the car sitting up on top of ramps. It’s a tail-loader, so that drops down and lifts the car. Then all the mechanics’ toolboxes, set-up toolboxes, spare nuts, bolts, washers…pretty much everything you can think of is inside that trailer.”\nLooking after the truck and getting the team in and out of 19 or 20 race meetings a year is a huge responsibility, but it’s only part of Colin’s job. He’s also the team tyre manager, and there’s a whole lot of responsibility there most people would never think of. Returning to the workshop just means more work.\n“Everything that’s in the truck has to come out,” explained Colin.\n“The car’s got to be disassembled, cleaned, and any new parts fitted.\n“I look after the tyre department, so every single tyre’s got to be stripped off the rims because there’s sensors inside that have to be checked. The wheels themselves have to be spun up on a special rim checker we’ve got to make sure they’re straight, and if they’re not they have to be sent away to get straightened. Then it’s cleaning the wheel nuts and all the components to do with the wheels.\n“While all that’s going on we work in with the engineers to get practice tyres for the next round, fit them up, then reload the truck.”\nLoading the truck generally takes a day, and of course it has to be washed so it looks presentable as it heads down the road, and at the race itself a whole new wave of work kicks off.\n“We usually get to the track the day before we start,” explained the unruffled Schwatrz. “Everything comes out of the truck again. We have to set up the garage, garage walling, flooring and make it look presentable, and I have to look after the tyres, purging them to get out any moisture – we use nitrogen in the tyres, not air. I set the pressures before they go on the car, and then I monitor and maintain them throughout the session.\n“A lot of people don’t realise it’s not like a normal road car where you can set them to 32psi on all four corners and just leave it. You actually have every single corner at a different pressure because each wheel works differently on the car on different types of track. So a clockwise or an anticlockwise track changes the tyre pressures on the corners.”\nEven the overseas rounds, where the truck stays in Australia, aren’t time off.\n“I’ve got to unload everything at the airport and they put it onto the plane. I get to have those rounds off from driving, but my role is still the same: looking after the tyres once we’re at the track.”\nAt 37 Colin is a long way from retirement, and he’s hoping to do a lot more in V8 Supercars.\n“You can always imagine yourself sitting back fishing, he chuckled. “That’d be awesome.\n“I’ve got ambitions to do more management side of things inside V8 Supercars and hopefully work my way up and learn different things. There’s always something different to do in racing. The truck driving’s one part of it, tyres are one part of it, but there’s all these little jobs that pop up that someone needs to do. It’s very much a team environment, so it’s no different to being on a building site as a chippy. If you’ve got one person not doing the right thing it makes it really hard to get the house built correctly. It’s the same here. If you have one person not doing the right thing, there’s something that could go wrong on the car, and we’ve really got to have each other’s backs.”\nThis being IRWIN’s first year back in V8 Supercars after a break, we wondered how the transition had been for the team with the new sponsor.\n“I don’t think we’ve found any teething problems,” said Schwar tz. “It’s been absolutely amazing.\n“I spent three years with the team with a previous naming-rights partner, and IRWIN coming on board has just been an amazingly smooth transition. Anything we need. Anything we want. We can call them, talk to them and they’ll do whatever they can to help us out.\n“They’re just an amazing group of people and very family-oriented.”", "label": "Yes"}
+{"text": "Now, a BMW i8 has been spotted on our home turf.\nAs we have been saying, BMW India will put on display the i8 hybrid at the fast approaching motor show along with 3-Series GT, new X5 and possibly the X4 too. (Click here to read about all 40 odd cars that are headed to us this year)\nPowering the much publicized BMW i8 is a 1.5 litre twin turbocharged three cylinder petrol engine that has a max power of 231 HP and peak torque of 320 Nm. The i8’s drivetrain also consists of an electrical motor that is responsible for an extra 131 HP and 320 Nm of torque. The combined power output for the BMW i8 stands at 362 hp and 570 Nm of torque.\nThe BMW i8 India launch is expected to happen in sometime and our guess is that the Bavarian car maker would price the car at INR 1.5 crores. Only 7-8 units of the futuristic supercar have been allotted for the Indian market and we can already see celebs and business tycoons lapping up the i8 units that have been allotted to our country.\nStay tuned to Motoroids for more updates on the BMW i8 India launch.\n-BMW i8 teaser by India", "label": "Yes"}
+{"text": "Fast Auto Movers was terrific! Sheldon, our broker, was honest about the process and the pricing, called periodically to check how everything was going, and was available to speak to me whenever I contacted him with a question or concern. We originally hoped to pay $995, but when the driver was secured, his price was $1045. At that point, I accepted the quote and the driver was available to pick up the car the next day. I felt this was a great price, since I'd had quotes ranging from $950 to $1400. The car remained on the same auto carrier; there was never a change of carrier or driver. The driver actually arrived a day ahead of schedule; I'd talked to him a few days prior to his scheduled destination arrival, and he was early! The car arrived in the same condition it left. All in all, it was a very good experience and I would highly recommend Fast Auto Movers.\nQuote or Order Id:\nQuote or Order Cost:\nI would like to report this review.\nPlease use the drop down below to select a reason to remove this review.\nPlease enter the web url of the two \"Duplicate\" Reviews.\nYou will need to Log In to your account.\nThen you will be able to run the \"Non-Customer-Review\" proccess.", "label": "Yes"}
+{"text": "Driver Jobs for Owner Operator in Atmore, Alabama:\nThe Name Hiring Truck Drivers Says it All!!! Listed below are the trucking companies in Atmore, Alabama. Feel free to follow the links to the companies profile page to learn more about them, or fill out an application. Please don't leave too early though, if you click one of the Apply Online buttons below we will send your application to numerous companies offering local truck driving jobs to company drivers, owner operators, and students who have recently acquired their CDL. Whatever category of truck driver you fit into, we will assist you in getting your dream trucking job. So PLEASE take some time to complete and submit your application and lets us do what we do best, Get Truck Drivers like you truck driving jobs.\nTrucking Companies in Atmore, Alabama\nYour 10-Codes of the Day\n10-43 = Traffic tied up at .........\n10-25 = Can you Contact .......\n10-17 = Urgent Business\n10-33 = Emergency Traffic at this station\n10-18 = Anything for us?\nYour Truck driving Definitions of the Day\nA bridge protection formula used by federal and state governments to regulate the amount of weight that can be put on each of a vehicle's axles, and how far apart the axles (or groups of axles) must be to legally carry a given weight.\nHorsepower, Gross Laboratory\nTested horsepower of a \"bare\" engine without fan, water pump, alternator, exhaust system or any other accessories.\nLeasing a company's vehicle to another transportation provider for a single trip.\nUltra-low emissions vehicle.", "label": "Yes"}
+{"text": "This might finally be tomorrow’s eco-friendly car. The Aptera, believe it or not, is a solar vehicle, able to go on a daily 70km drive without any power supply other than the sun. Its bodywork is made of a new kind of solar panels, and its one-of-a-kind shape is optimized for three purposes: simplicity, cost reduction, and energy efficiency. Still a prototype, this extremely light, three-wheel vehicle offers first-class performances and goes from 0 to 100 km/h in three seconds – which is faster than many of today’s sports cars. Equipped with a state-of-the-art electric drive, the Aptera can reach an autonomy of 1,500 kilometers. This is a first! This might be the beginning of an industrial revolution conceived by two engineers, Steve Fambro and Chris Anthony, neither of whom has worked for a big car manufacturer before. Like Mark Twain said: « They did not know it was impossible so they did it ».", "label": "Yes"}
+{"text": "People who care about their Porsche will agree that the best parts, especially replacement Knock Detonation Sensor, are the only ones that belong on their ride. If you have broken down and your Porsche needs some parts replaced, then we've got what you are looking for. Suppose a Knock Detonation Sensor malfunctions it can make for an extremely annoying experience for any driver. Sure, you bought your Porsche for its luxurious appointments and appealing looks. But when something breaks you have to replace it by purchasing Knock Detonation Sensor parts that don't break the bank.\nYour engine has several sensors that keep it running smoothly, and perhaps the most important is the knock (or detonation) sensor. This little device detects even the most acute and minor pre-ignition faults in your Porsche engine, and tells the ECU when this is happening. Usually, the air/fuel delivery and ignition systems are recalibrated in real-time to fix these knocks and pre-detonations. But if you have a failing or dead Porsche knock detonation sensor, you may be suffering from ignition problems without the ability to fix their causes.\nWhat reason is there to pay crazy retail prices when we have OEM and quality replacement parts to your door step and ready to install on your Porsche? With friendly and knowledgeable customer service staff, CarPartsDiscount.com will make your experience painless so we're your first choice for quality replacement Knock Detonation Sensor parts on the internet. With such a wide selection of quality replacement Porsche Knock Detonation Sensor parts, you can purchase anything you need to get your car back on the road and purring like the day you bought it thanks to www.carpartsdiscount.com. The largest selection of Porsche Knock Detonation Sensor parts in our warehouse for 911, 928, 944, 968, Boxster, Carrera GT, Cayenne, Cayman, Panamera, and many other vehicles you can see below.", "label": "Yes"}
+{"text": "Sold By: Dealer, Mileage: 35778\nSold By: Dealer, Mileage: 101509\nThe paint and interior are original and are in super condition. 5.6L V8, Automatic Transmission, AIR CONDITIONER, Power Locks, Electric windows, Cruise Control.\nAmazing crib in great shape. Changes to three different heights to grow with your little one. Price includes the day bed rail and rails to convert to a full sized bed. Dresser has 3 big drawers with a cabinet to the right for storage. Change pad included. Comes with all instructions and extra parts.\nItem posted in the C category\nItem posted in the TVs & Home Theater category\nCondition: Used, VIN: JTHFN48Y020025589, Mileage: 125302, Engine: 4.3L, Drivetrain: RWD, Exterior Color: Beige, Interior Color: Beige, Seller Notes: Check out this 2002 Lexus SC 430 2dr Convertible. Its Automatic transmission and Gas V8 4.3L engine will keep you going. This Lexus SC 430 comes equipped with these options: Water-repellent door glass, Vehicle theft deterrent & immobilizer system, ...\nSold By: Dealer, Mileage: 33239\nCondition: Used, VIN: 127148, Mileage: 2419, Engine: 428 Cobra Jet V8, Drivetrain: RWD, Exterior Color: Other Color, Interior Color: Other Color, Seller Notes: Titled as a 1962 with a Body of a 1965 Ford Shelby Cobra Replica Convertible for sale in Denver, CO 80249 This Ford is powered by a 428 Cobra Jet, V8 gas engine, paired with an Top Load 4-speed manual transmission with 2,419 miles on the...\n1996 ford mustang SALEEN CONVERTIBLE Stapleton Motors - Call or Text 303 720-7574 - $32,996This beautiful and RARE 1996 2-Door Convertible SALEEN Mustang with numbered bumper is about as sexy as muscle cars come It has a Supercharged 4.6L V8 with a 5 speed manual transmission This is NOT just another Mustang It has been custom outfitted with a Saleen Performance Air Filter, SaleenBorla mufflers...\nSebring convertible LXI with leather seats, after market radioCD player, air conditioning, power seats and windows and convertible top. Large trunk, runs good and shows well.\n1995 Pontiac Firebird Convertible, 39,900mis\nSUMMARY Direct supervisor to 3rd shift hourly employees. Responsible for supervision, direction and leadership in safety, quality, productivity and engagement to ensure goals are met. KEY ACCOUNTABILITIES Supervise employees in the daily production of corrugated board, to include training, planning, assigning, and directing work; evaluating employee performance; rewarding and disciplining emplo...\nThe car was restored original and is a beauty !! Paint is new. It only had 2 tiny spots of rust which were repaired.Rubber seals are new, Top is new, Top pads are new, and top works as it should. Bumpers were re-chromed and look new. Other chrome items are good driver quality. Original 428 motor, four gear transmission, and 3.25 rear axle. It also had special order HD suspension. It sounds grea...\n67 convertible deville 500 cu in from a 76Needs exhaust hooked up, new trans cooling lines, battery and some fine tuningCar run and moves just have had time to a longer road testI dont have time to finish this project. Make some reasonable offers it you can take it.I have everything for this car grill chrome emblems. No emails pleaseShoot a text\nThis 2013 2SS Camaro convertible is a great sports car! Well maintained with the RS package, all the electronics work perfectly, absolutely nothing is broken. The heads-up display is a nice touch! The best thing about this sports car is the POWER of the V8 Engine. Its performance is truly impressive. Driving with the top down and the wind in your hair is an experience unlike any other!\n$38991 - Used 2014 Jaguar F-TYPE Convertible for sale. Mileage19824 Exterior colorBlack Amethyst Metallic Interior colorJet Engine6-Cylinder Supercharged Transmission8-Speed Shiftable Automatic Drive type2 wheel drive - rear\nMini Cooper S Convertible 6-Speed Automatic Carbon Black Leather MINI Excitement Package Light Package Harman Kardon HiFi System Optional White Silver Metallic PaintCARFAX One-Owner. Clean CARFAX.3223 HighwayCity MPGCome to www.johnsonautoplaza.com To See Our Specials Call us at 303 654-1940 For Help with Any of Our DepartmentsAt Johnson Auto Plaza, we have devoted ourselves to helping and serv...\nLightly used Chicco NextFit Zip convertible car seat. Light wear. Has only been used by one child. Has not been in any car accidents.", "label": "Yes"}
+{"text": "We buy junk cars running or not. Are you wanting to sell a junk car? You have come to the right place. Houston Junk Car Buyers pays top dollar on the spot.\nUnlike so many other junk car buyers, Houston Junk Car Buyers really does tow your vehicle for free! There are no hidden costs. No hidden charges.\nWe Buy Junk Cars in the Houston Area\nBecause we buy junk cars in only the Houston areas. We are set up to purchase your vehicle on the spot. There is no waiting for days or having several different junk car buyers calling and harassing you. When you call us our wrecker will come out and pick up your vehicle, not some third party company!\nWe will never sell or give away your information. This is not a practice that we participate in. Any information is for our use!\nAbout Houston Junk Car Buyers “We Buy Junk Cars Program”\nOur program has taken years to develop. Working with the state and local municipalities we have developed a program that is both easy and efficient when selling your vehicle for cash.\nWhen our wrecker arrives to pick up your junk car or junk truck they arrive with the cash to pay you on the spot. The best part of the whole thing is the process takes less than ten minutes. This means you will not be tied up a long period of time while trying to sell your vehicle!\nOptions for When You Have Your Junk Car Picked Up\nHouston Junk Car Buyers always schedules your vehicle for pick up at a convenient time that matches you. We will come out to your place of employment, home, mechanic shop, or where ever you have parked your vehicle.\nAt no time will we ask you to bring your vehicle to us. You don’t have to worry about anything, everything is done for you by us! We buy junk cars and handles everything for you. Call us today have your cash today!\nHow to Get a Quote from We Buy Junk Cars\nGetting a quote from We Buy Junk Cars is as easy as picking up the phone and calling us at 713-592-2576. We will ask you a few questions about your car or truck. Based on your answers we will give you a free no obligation quote that you can depend on. Don’t wait to call for your we buy junk cars price!", "label": "Yes"}
+{"text": "Ford has a recall for more than 2.9 million vehicles to fix a transmission problem that may cause inadvertent rollaway crashes.\nSpecifically, the recall affects five different models from in the years 2013 to 2021.\nThis latest recall is similar to a problem a few years ago affecting the 2015 Jeep Grand Cherokee. The SUV reportedly had rollaway issues and caused the death of actor Anton Yelchin in 2016. The actor’s Jeep rolled down backwards down his driveway and it pinned him to a brick post at his Los Angeles home. However, at this time, there are no reports of deaths or serious injuries leading to this Ford recall.\nThe Ford vehicles to be recalled are:\n- Escape (2013-2019)\n- C-Max (2013-2018)\n- Fusion (2013-2016)\n- Ford Transit Connect (2013 and 2021)\n- Edge vehicles (2015-2018)\nThe cause of the problem is a bushing that attaches the shifter cable to the transmission, according to the National Highway Traffic Safety Administration. The cable may either degrade or detach, preventing the ability of the driver to shift into the intended gear. Motorists driving these vehicles may believe they shifted into park, but instead it was put in a different gear and rolled away.\nFord stated in documents that it knows of four separate injury reports involving the issue as well as six claims involving only property damage. Additionally, the auto company has 1,630 warranty reports and 233 complaints related to this problem.\nMeanwhile, owners of these vehicles should bring them to the dealership to have them replace the bushing and add a protective cap. Ford is sending out a letter to owners starting June 27.\nCalifornia Lemon Law Attorney James Johnson\nDid you purchase one of the above Ford vehicles identified with a major safety issue? If so, you may need help. Also, vehicles in the shop for 30 days or more may have a cause for legal action.\nCalifornia Lemon Law Attorney James Johnson will review your case and let you know if it qualifies as a lemon.\nAlso, we recommend that you obtain an invoice for all repairs and recall visits from the dealership. These documents will support your potential case. Should the vehicle experience repeated issues or become a safety risk, these documents support the Lemon Law Claim. Contact us for a free case review at 1-800-235-6801.\n- Parked Jeep Wrangler 4xe SUVs Catching Fire While Charging - November 29, 2023\n- Ferrari Recall Due to Fire Risk: SF90 Stradale, SF90 Spider Hybrid EV - November 9, 2023\n- Ford Mustang Recall Faulty Brake Fluid Sensor, Safety Risk - November 8, 2023", "label": "Yes"}
+{"text": "New 2021 Mazda CX-9 GT Captains Chairs AWD Automatic\nMazda CX-9 GT Captains Chairs Sherwood Park, AB\n983 Fir Street, Sherwood Park, AB\n2021 Mazda CX-9 Vehicle Details:\nNew 2021 Mazda CX-9 GT Captain Chairs! Text Message Us For More Info at 587-210-8409\nBluetooth, NAV, 360° View Monitor, Wireless Charger, Wireless Apple CarPlay, Android Auto, 12-Speaker BOSE® Premium Audio, SiriusXM™ w/ Traffic Plus and Travel Link®, Ventilated Front Seats, Power Folding Mirrors, 20\" Silver Metallic Alloy Wheels, Windshield Projected Driving Display, Traffic Sign Recognition, Adaptive Front Lighting, F/R Parking Sensors, Driver Memory Seat, HomeLink®, Retractable Rear Sunshades, Aluminum Interior Trimming, LED Signature Lighting. Text Message Us For More Info at 587-210-8409\nNew for 2021, your power liftgate has hands free access, an additional USB in the 3rd Row, One touch switch for power operated 3rd Row ingress/egress, Meter-set with 7\" LCD Display, and a satin chrome plated glove box lever.\nMoonroof, 9\" Touchscreen, Heated Leather Upholstery (Front & Rear), Power Front Seats, Heated Steering Wheel, Advanced Keyless Entry, Power Liftgate, Auto-dimming Rear-view Mirror, Push Button Start, Rain Sensing Wipers, Tri-Zone Climate Control, Auto-Leveling LED Headlights, LED Tail Lights, G-Vectoring Control Plus, Blind Spot Monitoring, Smart City Brake Support, Tire Pressure Monitoring, Rear Cross Traffic Alert, AM/FM/AUX/USB, HD Radio, Telescopic Steering, Power Windows/Locks.\nIncluded i-ACTIVSENSE Safety! - Radar Cruise Control, Smart Brake Support, Smart City Brake Support Rear, Driver Attention Alert, Pedestrian Detection, Distance Recognition, Forward Obstruction Warning, Lane Departure Warning, Lane-keep Assist, High Beam Control, Colour Multi-information Display.\nOur 2021 Mazda CX-9 GT Captain Chairs All Wheel Drive exudes sporty sophistication in Soul Red Crystal Metallic! This spacious SUV was designed with the driver in mind and offers impressive performance with its potent 227hp 2.5 Liter Turbo 4 Cylinder and 6 Speed Automatic. You'll certainly appreciate the responsive handling, swift acceleration, and 9.0L/100km on the highway.\nAccented by prominent 20 inch silver metallic alloy wheels and a distinct grille, our CX-9 GT makes a great first impression! This three-row SUV indulges you with a power liftgate with hands free access, a moonroof, key-less ignition, heated leather seats, an auto-dimming rear view mirror, tri-zone automatic climate control, head-up display and rear view camera. It's simple to stay informed and entertained with Mazda's Connect infotainment system featuring voice command, Navigation, Bluetooth, and a premium Bose sound system with HD radio, auxiliary/USB input and Internet streaming radio apps.\nOur phenomenal CX-9 keeps your precious cargo out of harm's way with the i-ACTIVSENSE Safety package including blind-spot monitoring, Radar Cruise Control, Smart Brake and Smart City Brake Support, Pedestrian Detection, Distance Recognition, Forward Obstruction Warning, Lane Departure Warning, Lane-keep Assist, anti-lock brakes, stability/traction control, airbags, and emergency telematics. With best-in-class fuel economy, a spacious cabin, elevated style and incredible performance, our CX-9 GT is going to please the entire family! Print this page, Come in for a Qualified Test Drive and Get a $25 Visa Gift Card... We Know You Will Enjoy Your Test Drive Towards Ownership! Text Message Us For More Info at 587-210-8409\nRemote Test Drives Available! All Covid Safety Measures here: https://www.parkmazda.ca/covid19/", "label": "Yes"}
+{"text": "A car alarm is an electronic device installed in a vehicle in an attempt to discourage theft of the vehicle itself, its contents, or both.\nCar Alarm sound and ringtones that actually works. free and easy to use.\n- Random sound\n- Auto replay\n- Set as ringtone, notification and alarm clock.\nShop your favorite products and we’ll find the best deal with a single click. Designed to make shopping easier.", "label": "Yes"}
+{"text": "MBE 900 Upstream Pressure Test\nPerform the following test set-up and test to determine the upstream pressure:\n- At the main filter housing, disconnect the fuel feed line and feed line fitting. This fitting is after the fuel return line and connects to the fuel pre-filter.\n- Install the pressure tester (J-46380)\n. Connect one end of the transparent test hose to the fuel pre-filter, using a union from the fuel adaptor parts kit (J-46377)\n. Connect the other end of the transparent test hose to the disconnected fuel feed line, using a barbed adaptor to the proper sized fuel line fitting.\nNote: The opening arm of the union at the pre-filter should press open the check valve.\n- Inspect the seals at the fitting on the fuel pre-filter for damage and replace if necessary.\n- Bleed the fuel system.\n- If equipped with a hand pump on the fuel/water separator, work the hand pump 50 times.\n- Crank the engine for 30 seconds at a time, but no longer. Before cranking the engine again, wait at least two minutes. The engine should start within four 30-second attempts. The fuel system is bled automatically. Stand the pressure tester on a level spot, such as the frame rail.\nNote: The pressure tester must be level to indicate correctly.\n- Open the fuel fill cap to release pressure in the fuel tank.\n- Start the engine and run it at a slow idle.\nNote: The pressure tester reads in bar. 1 bar = 14.5 psi or 100 kPa. The test measures suction at the fuel inlet. All pressure values are negative.\n- Read off the fuel pressure on the pressure tester. The gauge should read from – 0.09 bar to – 0.12 bar (– 1.3 to – 1.7 psi [– 9 to – 12 kPa]). If the fuel pressure is too low (less suction) or if fuel pressure is too high (more suction), see the causes listed in troubleshooting table in current MBE 900 service manual (6SE414).\n- Increase the engine speed to 2500 rpm.\n- Read off the fuel pressure on the pressure tester. The gauge should read from – 0.4 to – 0.5 bar (– 5.8 to – 7.3 psi [– 40 to – 50 kPa]).\n- Remove all test equipment. Reconnect the fuel feed line.\n|Unit Fuel Injectors and Unit Pumps Technician's Guide - 7SE500|\n|Generated on 10-13-2008|", "label": "Yes"}
+{"text": "- Street: Corso Garibaldi 146\n- City: Roccasecca Stazione\n- State: Virginia\n- Country: Malaysia\n- Zip/Postal Code: 3030\n- Listed: December 6, 2014 7:13 am\n- Expires: This ad has expired\nYou’ve been looking all day for good tips on auto insurance but have found nothing of use so far. It can be frustrating with the amount of unverified information out there. Pay close attention to the tips provided in this article and you should find plenty of good information to help you on your way to being an expert on the subject.\nWhen insuring a teenage driver, lower your car insurance costs by asking about all the eligible discounts. Insurance companies generally have a discount for good students, teenage drivers with good driving records, and teenage drivers who have taken a defensive driving course. Discounts are also available if your teenager is only an occasional driver.\nIf you’re currently covered by a car cheap car insurance insurance policy and happen to see the same policy for a better price, do not jump at the offer right away. A lot of drivers will instantly switch sides when they see the dollar signs, but they never bother to read the fine print. Companies lure you in with the promise of low payments, but leave you lacking in coverage, so always be weary of this fact.\nAs you get older and maintain a good driving record, you will save money on auto insurance. It’s worth asking your auto insurance company about discounts for experienced drivers — of course, providing you continue to drive safely. The best age for auto insurance rates is between 55 and 70 years of age.\nIf you are getting car insurance, it is important not to forget towing coverage. This is important because if you get into an accident or you are stuck somewhere, you do not want to be stuck paying towing costs. The rates for towing are usually not high for most insurance companies.\nCar insurance rates vary by state, so consider what the rates are in the area you’re planning to move to. Insurance rates can vary among geographic areas, and are affected by local crime rates. Suburbs and rural areas tend to have lower insurance rates than major metropolitan areas.\nHaving a alarm, car tracker or other theft deterrent installed on your car can save you money on your insurance. The possibility of your car getting stolen is part of the calculations that go into your insurance quote. Having a theft deterrent system means that your car is less likely to get stolen and your quote will reflect that.\nPeople with clean driving records, will pay the least in auto insurance premiums. Keep your record clear of tickets, moving violations, and accident reports if you want to lower your premium or keep it inexpensive. A single accident or ticket will likely increase the amount you have to pay.\nIn order to save money on car insurance, it is critical that you understand what level of insurance you need. If you are driving an older car, it might not be worth paying for comprehensive or collision cheap car insurance coverage. The most your insurance company will pay for damage to the car is its current resale value. Find the current resale value of your car and check it against how much you could save over two or three years by switching to the minimum liability insurance. You could find that simply switching your coverage from collision to liability will save you hundreds of dollars!\nIf you live in a city, own a car and you are getting car insurance, it may be wise to think about moving to the suburbs. If you liked this article therefore you would like to be given more info about compare Car Insurance kindly visit the web page. By making this move, you could be saving thousands each year on your car insurance, as it is always more costly in the city.\nYou can save money by increasing your deductible in case of collision. This means you will pay less every month, but will pay a more important part of the repairs if you get into an accident. If this is a risk you are willing to take, put some money aside.\nThe cost of auto insurance for any specific car, will vary from company to company. One of the reasons for this is because each company determines premiums based in part, on their past experiences with that specific car. Certain companies may have significantly different histories dealing with a specific car. Even in cases where the experiences are similar, there are bound to be small differences. Because of this, there is a definite benefit to shopping around when looking for auto insurance.\nBe sure to ask your insurance agent about car insurance discounts for having all of your insurance coverage with him or her. When you have your car, homeowners, health and dental insurance all in one place, you may qualify for a good discount. Additionally, if you have multiple cars to insure, it may lower your rates.\nIf you are a newlywed, have your automobile insurance policies combined. Companies offer something called a “multi-car discount”�, which means that you will save money just by putting your cars on the same plan. If the two of you don’t have the same insurance company, consider changing one of your poli\nSponsored LinksAdvertise here!\nInformation about the ad poster\n- Listed by: Marla Fitzgerald\n- Member Since: December 1, 2014\nOther items listed by Marla Fitzgerald\n- Looking For Car Insurance-Then We Can Help\n- Car Insurance Basics: What You Need To Know\n- Handy Ways To Help You Save Big On Car Insurance\n- Liability Insurance How Much Is Enough?", "label": "Yes"}
+{"text": "Dizzy Tuning offers a wide variety of both custom tune and flash tune options for Mazdaspeed 3 and Mazdaspeed 6 vehicles. Over 7 years of tuning experience on the Mazdaspeed platform, from completely stock vehicles to high horsepower exotic builds. The typical turn-around time for both custom, and flash tunes is within 48 hours. Please complete the Mazda Tuning Form after payment, so we can create your custom calibration.\nFlash Tune: Dizzy +1 is an OTS map created by Dizzy Tuning. This option includes one revision, and datalog reviews of both the base and final maps. Thousands of hours of research and development have been performed to create these OTS maps. Your map will be created specifically for the modifications installed on your vehicle. The extra revision just takes it one step further. This is a great option for stock turbo vehicles, with minimal modifications. The Stage 1 Flash Tune is for vehicles with the OE high pressure fuel pump (HPFP), and the Stage 2 Flash Tune is for vehicles with an aftermarket HPFP. Vehicles with upgraded turbochargers will require a full custom tune.\nCustom Tune: (or e-tune) is one of the most popular methods for tuning in the modern day. All tuning is done completely through email, and is typically completed within 3-5 revisions. For more information regarding the tune process, please visit our tuning info page.\n1) The \"Aux. E85/Methanol\" tune is a supplement to your \"Pump Gas\" tune. Please do not purchase this tune only. If you would like both pump gas and E85/methanol tunes, please add both items to your cart.\n2) Any modifications added after the tune process has begun, will require a “Touch-up E-Tune” purchase.\n3) There is no time limit for the E-Tune process. However, we do ask that you are courteous to others, and try to return datalogs as fast as possible. This way we can continue to offer high quality tunes, with a very quick turn-around time!", "label": "Yes"}
+{"text": "Contact you local automotive paint store. The should have the correct products. The major companines are 3M and Mequiers. \"Goo Gone\" works great! Or, Mr. Clean's Magic Eraser used VERY lightly.\nIF its just the paint , try 1500 grit wet sanding , then get a buffing/polish compout for the cars original paint for after you sanded off the foreign paint\nSo yes - if it's just the other car's paint that is on your car, you can get it buffed out. I'm speaking from prior experience. I've also hit a yellow pole, where the pole's paint got onto my bumper and it was easily buffed (polished) out.\nIf the scratch appears thin and white, it probably hasn't penetrated through the clear coat.If it is body-colored or shows metal, you've got a deeper problem. You should go to an Overspray shop, surely they know what will they do to your car.\nCellulose will remove any paint\nBumper cars !!!\nAre there bumper cars in universal studios\n10-15 bumper cars depending on the size of the bumper car floor.\ngo to etrade. they have tons of cars, but why do they have to be BUMPER cars!!??\nBumper cars use electricity, which could be from a nuclear plant\nIt is about £260 a bumper car.\nmost cars you dont have to but some of the newer ones you do,depends on the car\nThere is one noun in the sentence, bumper cars, a compound noun.\nIf it's latex based, you can try a product called goof-off.\nAll cars are different . . . what year make and model", "label": "Yes"}
+{"text": "Originally Posted by Jaffray\nDon't even want to hear about the history.. But felt like the sales guy didn't even want to talk about the civic at all. I asked him questions and he gave me 1 word answers.\nNot against private sales, just no private sellers selling vehicles with my specifications currently.\nI asked about it.. and he basically was saying \"all of our cars go through inspection. brand new brakes and discs, new oil, whatever needs to be done is done. This car was a theft vehicle.. not theft recovery. Water based paint was spilled on the vehicle that came off with the pressure washer\". He showed me a video of them spraying it off with pressure washer. Obviously it didn't come off as he stated it did (\"it came right off easily\"). When I called him out on it, he said \"then they cut polished it and waxed it. That is why there is some white residue\". First off, the car did not look anything like it was waxed or polished recently. In fact, it looked like it NEEDED one. Secondly, the \"white residue\" I pointed out to him was in the taillight seals, so there is no way it could be wax. I could clearly tell it was paint. Also, the car was keyed around entirely and he said \"i touched it up but didn't want to paint it because it was original paint\". I told him that he should have spot painted it and taken before/after pictures and video to prove the fact.\nBasically, the ONLY thing he told me was \"car had paint spilled on it\". I\nwas the one that had to point out: paint residue in tight spots, \"touched up\" long key scratches along the car, an interior that smelled of strong paint, and the seats were dirtier than a car that hasn't been detailed in months. The oil they put in was also very watery. Did not look like fresh oil at all, but more so diluted oil. The asking price is 9k and I offered him 7. He said he could get 9500 \"EASILY\" at an auction, but needed to keep it in the lot since \"no inventory\".\n- do not buy from here. scum who hides everything and lies.", "label": "Yes"}
+{"text": "Ford cranks up the power for ST versions of its Focus\nThe return of the ST is something in which Ford-lovers can revel, suggests Iain Robertson, especially as the power is up, in a car that is unflawed dynamically, provides vastly improved interior space and looks pretty good into the bargain.\nAs a schoolboy, when Ford launched its ‘RS’ programme, within which were hot versions of (then) Escort model, followed in short order by the Capri, the RS badge stood for something punchy and aimed at serious drivers. The company’s subsequent rally programme reinforced the sporty appeal and set a standard by which any rivals would be judged.\nWhen ST was launched as a sub-brand, first on the Focus and then on Fiesta models, it was a potential half-way house between the regular offerings and the more overt RSs. Over the years, it has become an important profit-earner for Ford, especially as costlier RS derivatives have always been more limited in numbers. When the new Focus model range was introduced last year, it was hoped that both RS and ST versions would follow in short order. The former remains an unconfirmed memory in the designer’s eye but the latter will soon be available.\nThe revived Focus ST builds on its class-leading status in both five-door hatch and estate body versions of the ‘Mark Four’ variant. Enhanced with unique suspension settings, braking and powertrain configurations for an even more responsive and agile driving experience, the new engine line-up creates up to 12% more power and 17% more torque than before. The aluminium 2.3-litre EcoBoost petrol engine now develops a cool 276bhp, while the 2.0-litre EcoBlue diesel engine kicks out a useful 187bhp.\nWhile diesel has been demonised by governments, it is worth highlighting that demand remains high, which warrants its inclusion in the line-up. It is a ‘clean’ diesel, meeting future exhaust emissions’ legislation, while providing the greater fuel economy potential, even though the per litre price carries a premium. Naturally, despite gutsier performance and worse fuel economy, the petrol version will be the bigger seller, not least because of its brisker figures.\nFord’s first application of a Borg-Warner developed, electronic limited-slip differential (eLSD) on a front-wheel drive vehicle enhances the ST’s cornering and stability using computer-controlled pre-emptive actuation. In other words, it is of a reactive type that splits engine torque between left and right driven wheels instantaneously, on demand. Gearbox choice of six-speed manual, or a new, quick-shifting, seven-speed automatic transmission, is offered, and Selectable Drive Modes technology is introduced to the ST for the first time. Continuously Controlled Damping (CCD; standard on EcoBoost petrol models) enhances the independent rear suspension for maximum refinement.\nThe most free-revving Focus ST petrol engine can blitz from 0-60mph in around 5.6s (7.7s for the diesel) and engine responsiveness is enhanced by the use of a low-inertia twin-scroll turbocharger. Innovative anti-lag technology, developed for both Ford GT supercar and F-150 Raptor pick-up model, is introduced to the Focus ST, for zestier performance in Sport and Track drive modes. It can be a little unnerving until familiarity builds but it works, accompanied by customary exhaust ‘pops and bangs’. Needless to say, the compression-ignition diesel cannot play the petrol’s cheeky soundtrack.\nOn the other hand, the most potent diesel engine ever fitted to a Focus, delivers peak power at 3,500rpm for immediate, linear acceleration. Ford has improved the snappiness of its manual gearshift, with an even shorter shift throw and less torque reaction. It can even feature rev-matching, if the optional Performance Pack is chosen for petrol models. Rev-matching enables less-experienced performance drivers to benefit from the seamless, momentum-maintaining gearshifts delivered by a ‘heel-and-toe’ driving technique, while also allowing experienced drivers to deactivate the system and do it for themselves, if preferred.\nAdaptive Shift Scheduling features on the auto-box and drivers can also select gears manually, using the steering wheel-mounted paddle-shifters. The ST demands only two turns from lock-to-lock of the much-revised steering system that is also virtually devoid of annoying torque steer. The similarly revised suspension settings that are designed to maximise the ST’s focus (sic.) also provide one of the most-connected front-ends of any car in the class. Even though the firm’s much-revered Richard Parry-Jones retired around four years ago, the engineering team he established at Lommel, in Belgium, has lost none of his dynamic touch. I reckon that the new ST will establish a fresh standard in handling for the class.\nAs has become customary, the new Focus ST is packed with ‘electrickery’ that includes active cruise control, lane-centring, adaptive front lighting, active parking assist, evasive steering assist and even a head-up display. Connectivity is also on-point with simple linking to Apple CarPlay and Android Auto. Destined to go on sale this summer, prices have not (as yet) been established, although you can reckon that the petrol model will be priced at around £32,000, with the diesel carrying a small premium.\nFord no longer produces cars in the UK and its current US management team has even contemplated stopping car production, in favour of SUVs and pickup trucks. Personally, I am glad that a shard of performance illumination still exists within Ford of Europe. As long as it does, we can look forward to progressive and enticing motorcars and Ford’s repute will remain moderately untarnished.\nConclusion: Few mainstream hot hatches will be as desirable as the forthcoming Ford Focus ST, past models of which also seem to generate a mild form of ‘collectability status’. It is a cracking compact machine, capable of outstanding characteristics in either petrol, or diesel forms. We shall have a more in-depth test in a few months’ time.", "label": "Yes"}
+{"text": "Street Outlaws Farm Truck In Weleetka, OK!!! (Must watch)\nPart 1. The super fast Farm Truck comes to Weleetka, Oklahoma and surprises everyone. It was a great day.\nsnapper and frank\nfranks test and tune, my step dad and i made this rat rod cause we got bored, it has since been sold to mad max\nDaddy Dave Driving ProCharged Malibu\nDaddy Dave from Street Outlaws driving a ProCharged Malibu on 275 Radials from the Outlaw Street Car Reunion at Memphis International Raceway.", "label": "Yes"}
+{"text": "BERG Classic - Extra Sport Red BFR-3\nDirect from BERG late October\nNot available for international delivery\nBERG Classic Extra Sport is a large pedal go-kart with additional front cover and mudguards over the back wheels. Those functional supplements make this vehicle looks like a professional racing kart. Thanks to adjustable seat unit and steering column with handy steering wheel this marvellous go-kart will grow with your kids from 5 years old. Heavy wheels with pneumatic tyres fitted in the super durable frame provide a great grip, which ensures a safe and comfy ride for the driver. The swing axle keeps the wheels firmly grounded even on bumpy terrain. Thanks to the double ball bearings fitted into steering system, you can easily steer this kart with one finger.\nThis sporty go-kart is equipped with the unique BFR3 system, which features 3-speed gearbox for a more comfortable drive. It allows for much easier drive uphill and move forward or backward from a standstill position even faster.\n- Suitable from 5 years old\n- Extra Sport front cover\n- Features 3-speed gearbox (BFR3)\n- Rear mudguards with reflective elements\n- Adjustable steering column\n- Adjustable seat unit\n- Thick pneumatic tyres for extra grip\n- Swing axle guarantees extra stability even in bumpy terrain\n- Double ball-bearings provides light steering\n- BFR system allows braking and reversing with the pedals\n- Includes power coaster brake\n- Dimensions (LxWxH):156 x 81 x 86 cm\n- Weight: 44.5kg\n- Maximum User Weight: 100kg\nBERG provides 2 years warranty* for all go-karts and trampolines. Register your BERG product within 1 month after purchase to receive 3 years of extended warranty on your go-kart or trampoline (except for the BERG Go², 1 year of extended warranty is applied if you register your BERG Go²).\nTerms & Conditions apply on BergToys.com", "label": "Yes"}
+{"text": "OK System Check\nthequattroking at yahoo.com\nWed Oct 9 17:46:45 EDT 2002\nNope. you don't have to remove the wheel. Takes me about 5 minutes to pull\nthe gauge cluster.\nEnough Audis to give plenty of headaches.\nParting: 1972 Mercedes Benz 280 SE 4.5\n> One more question - did you have to remove the steering wheel to get the\n> dash out? Someone told me you had to but Chris's instructions didn't\n> mention it.\n> your post was just fine!\n> I get both bogus error conditions and hieroglpyphics. Sometimes my\n> display actually shows the radio station! I'm sure that touching up\n> solder joints will fix all of it.\n> This is my first attempt at posting to the list so please let me know if I\n> use poor etiquette.\n> '91 200 20V Wagon - OK system gives intermittent false oil and brake errors.\n> I know the brakes are good (just replaced UFO's/pads and tied sensors\n> closed) and watch the gages for oil pressure and temp. It's bugging me! I\n> read suggestions from Chris Miller's page of touching up the solder joints\n> on the main board however my symptoms are slightly different ( I don't get\n> the hieroglyphics) . Is it the same solution? Any words of wisdom prior to\nMore information about the 200q20v", "label": "Yes"}
+{"text": "Best K3V154-83413 Gear Pump Price for Excavator Spare Parts\nGear Pump Price Information :\n- Product Name : Gear Pump Price\n- Parts Code : K3V154-83413\n- Condition : new\n- Feature : high efficiency\n- Structure : gear pump , piston cylinder\n- MOQ : 2 pcs\n- Warranty Time : 3 months\n- Payment ways : T/T , paypal , alipay , western union\n- Packaging details : carton packing with plastic bag outside\nGear Pump Products List :\n- gear pump EX30-2 EX35-2\n- gear pump 4I-1023 E320\n- gear pump PC78US\n- gear pump PC35-1\n- gear pump EX100-2 EX120-2 EX200-2 4255303 9218004\n- gear pump UH083 4035495\n- gear pump K3SP36C\n- gear pump A8VO140\n- gear pump SK200-6 SK230-6 K3V154-90413\n- gear pump PC200-5 708-25-04012\n- gear pump PC200-3 708-25-01064\n- gear pump EX200-1 EX330-5 ZAX330 4181700\n- gear pump SK100-1 SK100-3 SK200-1 SK200-3 SH100-1 SH100-3 KP1009CLFSS\n- gear pump SK135 K3V154-78213\n- gear pump DH225-9 R225-9 K3V154-83413\n- gear pump E330D\n- Gear Pump Komatsu Wheel Loader\n- Gear Pump Caterpillar\n- Gear Pump Komatsu Dozer\n- gear pump K3V153-100413\n- gear pump K3V154-100413 K3V180\n- gear pump R60-7\n- gear pump K3V112 SK200-5 K3V154-80413\n- gear pump A8V172\n- gear pump A10V43\n- gear pump PSVD2-27E\nQ : Can I get sample before mass order?\nA : We can supply sample to you for quality testing if the parts in stock, but the sample cost and courier cost need to pay by your side, for some parts sample only 1 pieces, we can refund the sample cost payment to you when you place mass order.\nQ : When will you send my order?\nA : The order shipping time based on your order quantity, for in stock parts, we will ship within 2-3 working days, for parts out of stock, normally takes 15 workings for production.\nQ : How do you do to make our business relationship good and long term?\nA : We keep good quality and competitive prices to ensure our customers benifit. Also, we respect every customers as our friends and we sincerely not only doing business, but also family, no matter which country our customers in.\nIf you are not finding the parts you needed via our website, pls feel free to contact me to get more information!", "label": "Yes"}
+{"text": "Milwaukee, Wisconsin -- Local US press reports suggest the global automotive seating business to be spun off from Johnson Controls in 2016 will be headquartered in Milwaukee, but the company insists the site will not be its HQ.\nJohnson Controls spinoff base set for downtown Milwaukee\nThe automotive seating business is to move to the building next summer, where it will accommodate Bruce McDonald, who will be chairman and ceo of the still-to-be-named company.\nJohnson Controls spokesman Fraser Engerman said the site will be among four corporate offices for the automotive spinoff but will not be identified as the company’s HQ.\nThe automotive business, which is projected to finish this year with $16.8 billion in revenues, is scheduled to start operating independently of Johnson Controls on 1 July 2016, with a legal separation to take place on 3 October 2016, according to press reports.", "label": "Yes"}
+{"text": "Three teenagers have been arrested after leading police on a high speed chase.\nAround 1p.m. Saturday, police tried to stop a stolen Chevy Cavalier on Highway M near the town of Westport.\nThe driver failed to stop and the pursuit began. Police chased the car for about three and a half miles at speeds sometimes close to 90 miles an hour.\nIt ended when the driver of the Cavalier crossed the center line and collided with another car. The driver and passenger of that car suffered only minor injuries.\nThe three suspects then fled on foot into the woods and were caught a short time later.\nThey have been identified as 17-year old Prenton C. Dixon, 18-year-old Ladarryl C. House, and Tremane D. Taylor,17.", "label": "Yes"}
+{"text": "Budget Direct Motorcycle Insurance\nBudget Direct doesn't offer motorcycle insurance yet. But that's okay - there's still a bunch of other options!\nWe don't currently have this brand on our panel. But don't fret! You can head to the Budget Direct website or compare other motorcycle insurance cover with finder.\nBudget Direct is a well known brand in the insurance space, offering car, home, travel and life insurance, amongst others. However, they're yet to enter the motorcycle insurance market in Australia. Given their popularity in the car insurance industry, it's quite possible that they may enter this space in the future. Watch this page!\nAsk an Expert", "label": "Yes"}
+{"text": "1997 Dodge ram, 4x4, 1500, 5.9 liter, the floor shifter works well, I move into either 4 hi or 4 lo, I get no light on, and only the rear passenger tire has power. I had the transmission rebuilt and it has not worked since. Please help, the truck is stuck in the snow in the backyard!\na 6ya Mechanic can help you resolve that issue over the phone in a minute or two.\nBest thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need. Goodluck!\n- If you need clarification, ask it in the comment box above.\n- Better answers use proper spelling and grammar.\n- Provide details, support with references or personal experience.\nTell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.\nTip: The max point reward for answering a question is 15.\nCarGurusOct 18, 2013 - to get it into 4LOW is to 1st get it into HI and then stop and shift it intoLOW. ... I have a 98 Dodge Ram 1500 that I can not get the 4 wheel drive to ... what web site can i go to so i can see how the inside looks on timing gears.\nNov 1, 2000 - This shift will be easier if you momentarily release the accelerator pedal. Apply a ... Do not attempt to shift to or from 4L while transmission is in gear or clutch is engaged. ... OK, now when you shift into 4WD it gets a little more complicated. .... I have a 97 RAM 1500 Club Cab Sport 4 X4 and I am having\nwell not sure what style shifting it has. if its the floor shifter to select. you need to have the truck in neutral first before changing the 4wd. same thing with push button shifting on the newer trucks. it just works easier for the parts to move not being in gear. if it wont work with the shifter then you might have something that is broke or jammed.\nI recommended checking fluid level in trans. first. If that's good try starting the vehicle and shifting from forward to reverse and giving it a couple seconds and either gear so that the trans can prime its self. Last resort drop the pan and put in a new filter and fluid.\nThere are some vaccum lines that go to your axle. there is a disconnect there and a switch that lights up your dash light when engaged. I would first make sure they are still connected and not damaged. The vaccum signal to engage and disengage comes from the top of your transfer case right under the shifter boot. To test if you disconnect is working, apply vacuum to one or the other side of the diaphram for the axle disconnect and try it out. otherwise you may have lost vacuum somewhere or you have a bad switch on your transfer case.\nLook for damaged wires, or something bent, on the Auto Disconnect Device on the front axle before you do anything else. The 4WD HI light is not coming on because the front diff is not engaging.\nRe 4 LO: In 4 LO, you ar NOT getting \"4 LO\", what you are really getting 2WD LO, because of the output gearing of the transfer case.\nIn any case, your front diff is not locking in, in either mode. The A.D.D. controls the 4 Hi lite.", "label": "Yes"}
+{"text": "Used Ford Escort for Sale in Green Bay, WI\nChoose Other Models to Add\nListings for these models will be added to the listings you are currently viewing.\nCalling All CarGurus Parents\nShare your family’s car-driving habits!Take our quick survey\n“Comfortable with a huge boot for practicality”\nThe Ford Escort is not infact an lx wagon it is a 4 dr sedan. Great little car 1.4 got it for £80 so it was a bargain, also has tow bar at the front and back so not standard either.\n1998 Ford Escort 2 Dr ZX2 Hot Coupe Used Cars in Milwaukee, WI 53218\nLocation: Milwaukee, WI 53218\n2001 Ford Escort 4 Dr STD Sedan Used Cars in Menasha, WI 54952\nLocation: Menasha, WI 54952\n2002 Ford Escort 2 Dr ZX2 Coupe Used Cars in White Lake, WI 54491\nLocation: White Lake, WI 54491\n2003 Ford Escort ZX2 Used Cars in Shawano, WI 54166\nLocation: Shawano, WI 54166\n2002 Ford Escort 2 Dr ZX2 Coupe Used Cars in Milwaukee, WI 53210\nLocation: Milwaukee, WI 53210\nFilter your search criteria!\nA large number of listings matched your criteria. You are seeing the top 2,000 listings.", "label": "Yes"}
+{"text": "|1976 Chevrolet Corvette T-Top Coupe! Nice Original Car With Only 46,248 Actual\nMiles! Numbers Matching Car! Price: US $15,900.00\n1976 Chevrolet Corvette L48 Coupe\nFinished in rare and factory code correct Buckskin paint finish over impeccable\nand all original Buckskin interior, this fabulous 76 model C3 Corvette T-Top coupe\nboasts only 46,248 actual miles and features working factory A/C, power steering,\npower brakes, tilt steering wheel, power windows, original numbers matching L48\n350 CID V-8 engine, original emission equipment, original automatic transmission,\nfully functional vacuum system (headlamps etc.), all working gauges, original\nfactory AM/FM radio and much more.\n-Paint condition overall is good driver quality. Upon close inspection there are\nsome light cracks in the finish, very typical of older single stage finishes especially\nover fiberglass. This car is essentially an all original vehicle with only one repaint\nover an unmodified and accident free body.\n-Interior is in exceptional condition and is also all original.\n-Under the hood is totally unmodified and all original with numbers matching engine,\ncorrect intake and exhaust manifolds, carburetor, ignition shielding, air cleaner\nassembly, valve covers, 2 into 1 exhaust system with original catalytic converter\netc. Overall mechanical condition is excellent as car was driven regularly by the\nprevious owner all throughout the summer.\n-Undercarriage is driver quality but is corrosion free as one would expect from a\nfair weather car that has only been driven 46k miles since new!\nThis Vette is a very uncommon find as most of the cars from this era have been\ncolor changed, wrecked, abused, driven into the ground, rusted out, poorly\nmodified with all manner of engine, body and interior modifications and often\nneglected. Finding truly original Corvettes is getting more and more difficult\nespecially at such entry level price points. The savvy C3 enthusiast will not miss\nthis opportunity to own an automotive legend for less than the cost of one of\ntodays cheap throw away foreign cars!\nOdometer currently reads 46,248 miles and according to previous owners account\nand vehicle condition is actual mileage, however, due to age the vehicle is sold AS\nIS and mileage exempt on the title.", "label": "Yes"}
+{"text": "No matter your preference, find it at a local Toyota dealer in your community.\nA perfect car for you isn't just a good find, it's something to cherish. Connect with a certified Toyota dealer in Fox, OK to continue your perfect car search.\nNo matter whether you're prepared to invest in a pre-owned sedan or need scheduling Toyota car maintenance in your local area, our goal is to give you the outstanding service and reliability that the Toyota brand is renowned for.\nToyota dealers nearby can help you provide you with certified Toyota parts to get your vehicle back to its feeling brand-new.\nProvide your car with the quality it deserves. From regular tune-ups to more work intensive issues, you can trust our qualified professionals at our local Toyota dealership to give you the highest level of quality certified Toyota car maintenance near you.\nIf you're organizing a tune-up or looking to book a test drive, Toyota dealers in your neighborhood help you to find exactly what you need, hassle-free.\nIt can be difficult to pick the ideal quality pre-owned car for your lifestyle. Your Toyota dealerships are able to help you schedule a test drive to help weigh up your options in person.\nDo you know exactly how much your car is worth? Knowledgeable sales professionals at your neighborhood Toyota dealerships near you are ready and willing to answer trade-in concerns and discover the proper value of your car.\nDrop by and let your neighborhood Toyota dealerships show you just how simple scheduling a payment plan for your quality used Toyota can be.", "label": "Yes"}
+{"text": "Website is www.affordableclassicssandiego.com\nClassic Cars Wanted! Finders Fee Paid!\nPhone number is (619) 561-3182\n2011 Chevrolet Camaro RS For Sale\n2011 Chevrolet Camaro RS. Has a V6 engine with an automatic transmission. The car is mechanically sound. This car has just over 118,000 miles. A/C blows cold. Heads up display works without any issues. Comes with the original wheels. Great color combination. Two owner vehicle.\nThe interior of the car is all complete and in great condition. Has the gauges in the center console. The dash is in great shape. Has a dash cover on to keep it protected. Seats are in perfect shape. Glass is all there and in good condition. Everything works. Boston sound system. Has a clean California title. Registered until 2023.\nContact us for more information and to book a time to view this vehicle.", "label": "Yes"}
+{"text": "This component is a part of both Audi A4 and Audi A6 transmission problems. When the car becomes a few years old, the torque converter is one of those components that will start showing some problematic symptoms. ... audi a6 a5 a4 cvt gearbox oil and oil filter change audi cvt gearbox slipping problem solved. Changing your Audi automatic. May 18, 2010 · In fact, Audi’s UK website proudly proclaims “a front-wheel-drive car is in principle more controllable and tracks better than conventional rear-wheel drive.” OK then, in advance of the all-new A4 headed our way in '09, let’s have a look at the Audi A4 2.0T and see if we can get past the FWD thing..\nrhos caravan park anglesey\nsite merchandising specialist walmart salary\n|You loaded this Main Page on Monday, 2022-09-19 T 21:51 faa pma database.|", "label": "Yes"}
+{"text": "Aston Martin will provide Components One with a security and medical automobile for the upcoming season, sharing the accountability with Mercedes.\nThe British manufacturer has returned to the sport for the first time in over 60 years. Four-time world champion Sebastian Vettel and Lance Stroll will drive for the team.\nAs part of its close partnership with world champions Mercedes, Aston Martin has supplied a Vantage to be the safety car and a DBX to be the medical car.\nBoth will carry the shade of green Aston Martin will run with its race cars in 2021.\nThe Vantage and DBX will debut at the Bahrain Grand Prix on March 28. Aston Martin will share duties with Mercedes, which has supplied a safety car since 1996.\nMercedes is repainting its AMG GT R safety car and C 63 S Estate medical car in red for the upcoming season.\nAlan van der Merwe — who played a critical role in the quick response to Romain Grosjean’s huge crash at the Bahrain Grand Prix — will continue as F1 medical car driver, while Bern Maylander remains in his role as safety car driver.", "label": "Yes"}
+{"text": "If there’s a surefire way to improve the looks of the average motorcycle, it’s by tidying up the back end. And this Triumph Bonneville, from the Argentinian builder CMP Project, is a textbook example. Careful fabrication and a custom-fitted seat have given Triumph’s mainstay roadster a new stance and a new look—one that’s retro and purposeful in equal measure.\nParts are hard to come by in Argentina—indeed, fuel is often hard to come by in the second largest country in South America. But CMP Project’s Federico Lozada and German Karp have done an excellent job despite the difficulties.\nThey started by virtually dismantling a 2011-model Triumph Bonneville. The rear subframe was chopped and shaped closer to the 1970s original, and a new seat was built to closely follow the new rear frame tubes. The 17” back wheel was replaced with a 19”, so both wheels are now the same size.\nAs well as improving the looks, this raised the height of the bike a little—a useful bonus for CMP Project’s client, who is 6’5” (195 cm) tall. The tires are flat track, complemented by an Arrow exhaust system and Renthal bars bought from Japan.\nHalfway through this project, the guys from CMP met Pedro García from the hot Spanish shop CRD (who we have featured before). “García had already built a custom Bonneville, so a lot of info and data was exchanged,” say Lozada and Karp.\nThis Bonneville now weighs 25 kg less than the stock bike, so it should be even more fun to ride. It was CMP’s fifth project, and they’re now up to #8. Keep an eye on their Facebook page for more inspiration.", "label": "Yes"}
+{"text": "Louie Herron Toyota provides lunch to the workers at the Georgia Power Company Plant Branch facility in Milledgeville, GA. Louie Herron Toyota is YOUR Lifetime Warranty Dealer. Find all your favorite Toyotas here at irresistible prices: Tacoma, Tundra, Camry and Corolla are just the start of America's best made, best performing line of cars, trucks and SUVs. Pre-owned certified Toyotas, used cars and used trucks in every make and model are yours to drive home as well. Award winning Service and Parts Departments complete the most professional care you'll receive anywhere in Middle Georgia. From Warner Robins to Dublin, from Macon to Lake Oconee, from Atlanta to Athens and all around Milledgeville, our Fast, Easy and Friendly process is the ONLY way we do business.", "label": "Yes"}
+{"text": "Aston Martin Racing is on the GTE Pro pole position for this weekend’s 87th running of the 24 Hours of Le Mans. It’s 60 years since a famous 1959 win led by team director John Wyer with a DBR1 driven by Roy Salvadori, and a man who would kick Ferrari’s “ass” many more times, notably with Ford GTs a few years later – Carroll Shelby, again working with Wyer.\nHowever, qualifying this year, as then, is just a half-breathe of a second compared to finishing first after the clock goes ‘round two times.\nThis week, on a dry track and with Danish driver Marco Sørensen at the wheel, the #95 Vantage GTE claimed a top time of 3m:48.00, besting by 0.112s the #67 Ford GT Chip Ganassi Team UK car, which was 0.718s ahead of #63 Corvette Racing car driven by Antonio Garcia.\nCorvette Racing drivers Oliver Gavin and Jan Magnussen have celebrated victories on the Le Mans podium three times together – in 2004, 2005 and 2006. Gavin also won once prior, in 2002, and one time since, in 2015 with co-drivers Tommy Milner and Jordan Taylor in the No. 64 Corvette C7.R. All of Magnussen’s wins at Le Mans have come as a member of Corvette Racing.\nIn addition to representing Corvette Racing, Magnussen and Gavin are part of a larger group – 28 drivers to be exact – that are representing the WeatherTech Championship at this year’s 24 Hours of Le Mans. Both are WeatherTech Championship GT Le Mans (GTLM) champions, as Magnussen won the title each of the past two years with Garcia, while Gavin won the 2016 title with Milner.\n“It’s nice to go there and be competitive, because it shows how hard of a championship we have here in IMSA,” Magnussen said. “I do feel that our class in IMSA racing is the toughest class out there, and it’s nice to go there and be competitive and beat those guys from the WEC (FIA World Endurance Championship). It’s a cool thing to do.”\nThe #91 Porsche GT Team and #82 BMW M8 Team MTEK were fourth and fifth respectively. Thus, in the upcoming battle royale five different manufacturers are filling the top five starting spots in LMGTE Pro.\nThe real pace is in the two LMP classes ahead of GTE, meaning that the Aston – as quick as it may be – is starting in the 29th position overall behind the LMP2 cars, which start ~11 seconds behind the LMP1 cars.\nReigning 2018 Le Mans winner – LMP1 – Toyota has the #7 TS050 Hybrid on the pole position going into what is also Saturday’s FIA WEC Super Finale. Kamui Kobayashi set the fastest time after clocking 3:15.497 in Q2, his second pole at the 24 Hours of Le Mans.\nToyota Gazoo Racing’s #8 was second fastest, with privateer Russian team SMP Racing in the #17 BR Engineering BR1 car in third. Notably just 0.251s separate the #8 Toyota and the Non-Hybrid SMP Racing car.\nLMP2 – the fastest cars are starting in the 9th (3:25.345) through 28th grid positions – was equally competitive with just 0.594s separating the top three cars. The #39 Graff entry narrowly took pole* over the #28 TDS Racing Oreca 07-Gibson car with Loïc Duval posting a time of 3:25.345 for the WEC entry in the third and final qualifying session.*\n(*Following Scrutineering, Graff’s first 16 lap times from Q3 were deleted after the team were penalized for failing to stop at the weight bridge when signaled to do so. The result elevates #28 TDS Racing into pole position for Saturday’s race, with DragonSpeed second and Signatech Alpine Matmut third.)\nThe #11 DragonSpeed Oreca 07-Gibson had proved quickest during Q1 and Q2 but was unable to keep up the pace for Q3. The #36 Signatech AlpineA470 Matmut – which is challenging Jackie Chan DC Racing for the LMP2 title this weekend – was third out of the WEC entries.", "label": "Yes"}
+{"text": "Great place with wonderful friendly people. They have great expertise and always do a wonderful job. Would highly recommend. - Michael C. (5 star review on Google)\nThank you for visiting Ewing Auto Service in Mount Vernon, IN. Count on our automotive repair technicians to keep your car, truck, suv, or van on the roads longer and safer.", "label": "Yes"}
+{"text": "Well I'm running the MSD ignition+wires on my car gapped at .065 now, seems to run a little nicer. I have seen better gas milage though (for now) on 3 tanks already after installing it. The only downside is when it's really cold it has rough idle until it warms up.\nThe ford racing wires are just bigger wires, I don't know if that means you're going to get a bigger spark though. You might just be getting the benefit of having a larger wire able to carry a little more voltage.\nI don't know about the Solo II rules though man, sorry can't help you out there.", "label": "Yes"}
+{"text": "Ford Motor Co. has recalled 33,021 C-Max hybrid cars because they may not adequately protect occupants’ heads in a crash. Vehicles involved were made between Jan. 19, 2012, and June 25, 2013 and don’t have panoramic roofs. C-Max hybrids with panoramic glass roofs aren’t involved in the recall. NHTSA discovered during vehicle testing that the car failed to conform to safety standards pertaining to head injury risk. Ford says there have been no reported injuries related to the issue.\nFord will notify owners of the recall beginning this month. Dealers will install additional energy absorbing material between the car’s headliner and the roof. Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.\nContact us today for a free legal consultation with an experienced attorney.\nFields marked *may be required for submission.\nIf you would like to subscribe to the Jere Beasley Report digital edition, simply visit our Subscriptions page and provide the necessary information or call us at 800-898-2034.\nAttorney Advertising - Prior results do not guarantee a similar outcome.", "label": "Yes"}
+{"text": "One day, cars will drive themselves. Driving will be a thing of the past, and if the tech industry is to be believed so will traffic and road accidents. All because the autonomous car’s computer brain is more connected and aware than any human driver could be. It’s a prospect that would change the way human beings get around the world.\nModern cars can already do a lot of things autonomously, though they aren’t at the stage where they can truly be called ‘self-driving’. Right now the best autonomous driving systems are only on ‘Level 2’ of the autonomous driving scale. But have you ever wondered what that actually means?\nWhat is the autonomous driving scale?\nThe autonomous driving scale is made up of six different levels, each describing different levels of automobile autonomy. The higher the level, the less input and oversight is required from a human driver.\nThe scale was first laid out in 2014 by the Society of Automotive Engineers, and has since been updated in both 2016 and 2018. These levels have also been adopted by the U.S. Department of Transportation, and have become the way the auto industry defines just how autonomous a particular car or driving system is.\nWhat are the different autonomous driving levels?\nCurrently there are six levels of autonomous driving, ranging from ‘Level 0’ (zero autonomy) all the way to Level 5 — absolute full autonomy. Each level represents a new stage of autonomous driving ability, so let’s break down what they are, and what they mean.\nLevel 0 is a car that has absolutely zero autonomy, and all driving has to be taken care of by the driver. This level also includes cruise control, provided it’s the old-school cruise control where the driver still has to control braking and acceleration.\nLevel 1 is the most common form of autonomy right now, and involves the driver and the car sharing control over the road. The most recognizable Level 1 autonomous feature is adaptive cruise control, where the car has control over acceleration and braking, but the driver remains in control of the wheel. The car ‘sees’ the traffic around it to alter its speed accordingly.\nLevel 1 autonomy can also include steering assistance, but only when the driver maintains control over the speed — like auto parking. Other common features include automatic emergency braking systems, blind spot monitoring, and lane keeping alarms that alert you if you start to stray out of your designated lane.\nLevel 2 autonomy is where the car is able to take full control, and handle acceleration, braking and steering at the same time. This level is often referred to as ‘hands-off’ autonomy, since the driver doesn’t need to do very much work.\nLevel 2 autonomy can be confusing for some people, who assume the car is fully autonomous because it’s able to steer and control speed at the same time. However automakers have warned against this. This is why an attentive driver is still needed, ready to take control at any time.\nLevel 2 is currently the highest level of autonomy you can get in a commercial car. Tesla’s Autopilot, GM’s Super Cruise, and Nissan’s ProPilot are all examples of Level 2 autonomous driving systems.\nLevel 3 is also known as an ‘eyes off’ system, where a person sits behind the wheel, but can take their eyes off the road ahead while the car does all of the actual driving. Level 3 autonomy allows the car to make situational decisions, but a driver must still be alert and ready to take over where necessary.\nLevel 3 autonomy isn’t widely available in road cars, because it sits in a legal grey area. In fact there are only a handful or Level 3-capable cars, like the new Honda Legend, and even those are only available in limited quantities in select regions.\nLevel 4 is sometimes referred to as ‘mind-off’ autonomy. In other words, the car is so capable that the driver isn’t even needed. If they want to fall asleep, they can. However there are some caveats.\nLevel 4 autonomous systems will only be allowed to operate within certain places, like geofenced locations or traffic jams. More importantly, it must also be able to get itself to a safe location if these conditions aren’t met, or in emergencies, and the driver isn’t responding. The driver can still take manual control if needed.\nMost of the cars utilized in self-driving car trials have Level 4 autonomy, since they drive around independently but still have a human driver on hands just in case they’re needed.\nLevel 5 autonomy is where the car is capable of doing all the driving with no option for a human driver to take over. These cars likely won’t have steering wheels or pedals, and should be able to go anywhere without assistance.\nThere are no Level 5 autonomous vehicles out in the world right now, and we’re still a ways off from actually putting them out on the roads. More to the point, there’s still no legal framework in the U.S. or elsewhere that would make it legal to even sell them to the general public.\nWhen can we expect something better than Level 2?\nThe main issue with autonomous cars is that there are huge legal implications for their use. Right now, a Level 2 system requires an attentive driver who can take over at a moment’s notice — which makes the driver liable for what the car does.\nTake autonomy a step further, to a stage where the driver doesn’t need to pay attention, and the car is doing the brunt of the driving, and things become a lot more complicated. There’s no legislation governing the use of anything Level 3 and above by the general public. Autonomous vehicle trials do take place, but only with approval from the relevant government authority.\nOf course this hasn’t stopped automakers from making grand promises about the future of autonomous cars. Volkswagen has claimed that the ID.Buzz van will offer Level 4 autonomy by 2025, while the Apple Car, which is said to be completely autonomous, is also rumoured to arrive around that same time.", "label": "Yes"}
+{"text": "Special Offer 2.18%! Previous Owner Mr Lee Has Recently Retired From His Shipping Business And Left This Beautiful Gem To It's Next Lucky Owner! Mr Lee Took Great Care Of The BMW With Regular Servicing And Mr Lee Had Spent More Than $20K On His BMW Just To Make Sure His Car In Tip Top Condition! It Is Seldom Driven And Hand Washed Daily! Do Not Miss This Truly Gold Opportunity.Price Include GST!\nCall Now Darren@ 86088466 Lot B27\n|Dereg Value||$56,929 as of today|\n|No. of Owners||1|\nBMW 320I M-SPORT\nManufactured 2012 Mileage 47,701 km (7.7k /yr) Transmission Auto Engine Cap 1,997 cc Road Tax $1,210 /yr Power\n135.0 kW (181 bhp)\nCurb Weight 1,420 kg", "label": "Yes"}
+{"text": "2024 Mercedes-amg Eqe Suv Delivers Up To 687 Hp At The Expense Of Range\nYou can also get OEM Mercedes-Benz parts at our service division, as properly as a assortment of accessories for your Mercedes-Benz vehicle. Our technicians are also certified to work on your Mercedes-Benz and can use higher-high quality components which includes original equipment manufacturer components and the latest in technology and gear. You can schedule service by calling the service department. If you happen to be buying for a new Mercedes-Benz car, quit by our store and let us show you our in depth new inventory. We have a selection of new Mercedes-Benz models in the San Jose location, such as all the most common and sought-immediately after models in a wide assortment of body types and colors.\nAnd whilst the dynamic engine and transmission mounts enable to decrease vibrations getting into the cabin, you will nevertheless really feel the eight-cylinder rumble. The tremors aren’t as pronounced as a Challenger HEMI that will wiggle change out of your pocket, but additional a continual auditory thrum. Nonetheless, the bellowing of the deep-timbre V8 grows louder the extra you gauge the throttle, and builds and builds with a crescendoing bark on higher RPM shifts. Out on the open road, no other car feels or drives like the AMG, partially since of the sitting position.\nEach engine is given a exceptional tag bearing the name of the builder, that serves as a seal of excellent. Know the Car Ahead of You Invest in Do not get a auto with unseen issues. Get a complete history report and be confident in your buy. Our pre-chosen selections, based on typical equipment for this vehicle. We drove the GT R Roadster in Miami, for the duration of a sunshine-filled week. This weather was about as common Miami as it gets.\nShe was superb and you could see / hear her smile in her eyes and voice. Taylor exceeded my expectations and if she is representative of the rest of the dealership Wow! I hope Taylor continues to be assigned to my partnership.\nThe dealership is aware of the have to have to stay socially distant and has procedures in location to keep their consumers and workers as protected as attainable whilst acquiring necessary service. I had periodic upkeep overdue that could not wait. I was able to get the appointment I required, a loaner that had been sanitized and the vehicle returned to me when promised. It is constantly a pleasure to deal with Mercedes Benz of Naperville. I had a good practical experience every time I frequent this dealership I have a very good knowledge due to the buyer service fantastic customer service .\nBut greatness is hardly ever down to a single outstanding strength – what matters additional is the intelligent mix of seasoned and fresh virtues. There was not a lot to be discovered from the quite but dynamically frustrating 190SL, but the pagoda-roofed W113 oozed elegance and style, and these qualities are among the cornerstones of the 2022 model. The R107 was a large good results simply because it fused status, high quality and punch – just like the existing car or truck does (even though also throwing in a bunch of higher-tech innovations). Valuable woods, carbon fiber, BRABUS fine leather as soft as a glove in three,500 leather colors – the selections are endless when it comes to the interior appointments. BRABUS creates tailor-produced automotive dreams in an intelligent mix of craftsmanship and state-of-the-art machining.\nThe carbon ceramic brake rotors (15.3 front and 14.2 rear) are paired with some striking, large yellow brake calipers. The vehicle also gets retuned suspension and steering. It characteristics a nine-mode traction control technique, adaptive dampers, speed-sensitive steering, and rear-wheel steering. The car or truck gets a four.-liter twin-turbo V8 that tends to make 577 hp and 516 lb-ft of torque. A dual-clutch seven-speed transmission routes energy to the rear wheels. Put the prime up, and you can get from to 60 mph in a quick 3.five seconds.\nI measured the actual sound level inside the EQS at 73 MPH highway speed and found that it was 3db reduced than than in my 2017 S class. Even the unadorned EQS back seat is much better read this than that of any other higher end domestic or foreign brands we have owned. Our back seat passengers to date have invariably been impressed with the surroundings and comfort of the EQS.\nMore than $900 in labor and less than $300 in parts?? I guess because I reside in Naperville and personal a Mercedes they have the proper to gouge me and defy logic and carry out maintenance on a vehicle that needs an $8000 repair. The service manager told me the upkeep would improve the worth of my vehicle. Worst buyer service I have ever encountered. They did not accept accountability for their errors and management blew me off when I called for resolution.\nHe is creating false claims and just tries to sell me the automobile. But in the finish I nonetheless take the vehicle simply because I seriously like it. Some of the characteristics missing is not large deal to me, it still feels bad that the new sales person is attempting to make me accept the automobile he pulled from the inventory by supplying false claims. Beside this, he is nevertheless pretty beneficial and supportive in the acquiring. The mess comes when I start off the paper function with the finance workplace.\nThese products and solutions are generally sold through license agreements or subscriptions. Our investment management business generates asset-primarily based fees, which are calculated as a percentage of assets beneath management. We also sell both admissions and sponsorship packages for our investment conferences and marketing on our websites and newsletters.", "label": "Yes"}
+{"text": "Terry and I did mine. The only thing I did different was in making the rear plate. I made a prototype rear plate out of clear Plexiglas so I could see where to put the brackets and where to cut the outline. It was really easy to make final adjustments this way. Then I traced it out on a black kitchen cutting board, assembled it, and it fit on with just a low pressure push to flex the board and click it into place.\nA forum community dedicated to Kawasaki Versys motorcycle owners and enthusiasts. Come join the discussion about performance, touring, modifications, classifieds, troubleshooting, adjustments, reviews, maintenance, and more!", "label": "Yes"}
+{"text": "With its long, low, and lean proportions, the iconic Jaguar XJ220 continues to look stunning even by modern supercar standards 25 years after hitting the road.\nThe XJ220 was the fastest production car in the world when it first went on sale in 1992, but sales were disappointing as Jaguar managed to coincide its expensive new car with a UK-wide recession.\nOnly 275 out of a planned 350 cars were sold before production was canned in 1994. The rarity of the supercar has ensured a keen interest on the classic market however, and while the design hasn’t aged a day the supply of tyres has run dry.\nHowever, Bridgestone recently came to the rescue of the rare vehicle’s owners by introducing new rubber for the classic machine.\nThe Japanese tyre manufacturer has released a 42-minute documentary as a deep dive into the process of creating new tires for the XJ220. Even if you have no interest in engineering the rubber for the Jag the cinematography of the gorgeous supercar is worth seeing.\nBridgestone tested 17 mixes of rubber before the engineers found the perfect cocktail for the XJ220. Model specialist Don Law Racing aided the process by lapping a circuit in each compound and offering an opinion on how it affected the Jag’s performance. Former XJ220 engineers and test drivers even weighed in.\nThe XJ220 features a 3.5-litre biturbo V6 making 548hp, and the body’s slippery aerodynamics help it to a still-impressive top speed of 217mph.\nWhere the XJ220’s contemporaries like the Ferrari F40 and Porsche 959 can now command up to £1m or sometimes even more, tidy examples of the Jaguar can be found for as low as £300,000. Quite the bargain.\nNow thanks to the work of Bridgestone, at least new owners don’t have to worry about getting tyres for them.", "label": "Yes"}
+{"text": "Refresh or Repair Your Ride with Original Nissan Parts Near 18842\nTake care of your Nissan with the right quality parts from Nissan Parts & Accessories near 18842. Order Nissan parts and have them shipped to your home or pick them up at your local Nissan dealership. It's easy to get the parts your vehicle needs. Whether you order filters, tires, brake pads, batteries, wipers, bulbs, or something else entirely, you can trust that every genuine part is designed to complement your Nissan as it cruises down the road in 18842. Bumper to bumper, all genuine Nissan parts are custom-fitted, custom-designed, and durability-tested for your Nissan, and come with a Nissan-backed 12 month/12,000 mile (whichever occurs first) limited warranty (if installed by the dealer at the time of purchase).\nWhat Nissan Replacement Parts Are Available Near 18842?\nHigh-quality Nissan auto parts are a good move when you want to fix or upgrade part of your Nissan, and many repairs can be completed at home with some automotive knowledge and a couple of tools. If you're not comfortable with DIY fixes, visit your local Nissan service center. But why go with genuine Nissan parts near 18842 and what's available? When you purchase quality, genuine Nissan parts on the Nissan Parts website, you can be confident you're ordering the right component for your Nissan model and trim. \nBrowse Nissan Interior Accessories Near 18842\nUpgrading your Nissan interior with genuine accessories is one of the easiest places to start when it comes to vehicle care. Many accessory and interior parts are straightforward to install and instantly enhance your car's aesthetics. Help safeguard your floors from wear and tear with All-Season Floor Mats, High Wall Liners, or replace the ones you've got with high-quality new carpeted floor mats. Make room for more adventure when you organize your trunk/cargo area with trunk/cargo nets, shopping bag hooks, and cargo organizers. Upgrade every drive with genuine Nissan interior parts and accessories that look just right, inside and out, including interior accent lighting, trunk sub-floor organizers, rear view mirror, floor mats, car accessories, and more! Accessories are available online or at your 18842-area Nissan parts store.\nShop Nissan Brakes, Steering, and Suspension Parts Near 18842\nCan't stop thinking about brake problems? Vibrating in the steering wheel or brake pedal, screeching sounds, or a soft brake pedal when braking are all signals that it could be time to shop for replacement Nissan brake parts near 18842. Depending on the issue, new steering and suspension parts might be a wise choice, too, since your brakes, steering, and suspension all work together to stop the vehicle. Shop for Nissan parking brake components, cables, brake pads, and more online, along with steering gears, suspension systems, axles, and even steering wheels. When you purchase custom-made Nissan parts from the Nissan Parts store, you can speed up and slow down with confidence.\nShop All-Season Tires, Winter Tires & More Tires for Nissan Vehicles\nStart with Nissan Parts online when shopping for tires in the 18842 area. Why? Again, that's because we know your vehicle. Cars and their tires have to work together. When you drive with the right tire type and size, you get more of what you love out of your Nissan — comfort and fun! Without the right tires, your Nissan's performance can suffer. That's why we only sell tires that match your Nissan's needs. There's no guessing, and no need to click through dozens of sites. and we offer well-established tire brands, like Hankook, Continental, Yokohama, Bridgestone, Goodyear, and Kumho.\nBuy all types of tires for your Nissan, and then have the set installed at your 18842-area service center. Ask about Road Hazard Coverage, too!  This program supports your tire investment by helping to cover what it would cost to replace or repair a damaged or flat tire. When you buy eligible tires from your Nissan dealer near 18842, you can count on a great fit at an affordable value. We keep things simple and stay focused on providing you with the right tires for your Nissan.\nFind Nissan Fuel, Engine, and Ignition Parts Near 18842\nThrilling performance starts with your Nissan engine. It keeps you moving so mile after mile can turn into memory after memory. Order Nissan parts online or near 18842 to get the engine parts you need to repair, upgrade, or maintain your Nissan engine. Tackle DIY engine care in your driveway with a new engine air filter, or turn to your nearest Nissan service center to perform a more difficult installation, like for a crankcase ventilation system, manifold intake, or an oil pump, to name a few. The proper fuel, ignition, and engine parts can help maintain your vehicle's thrilling performance.\nPurchase Nissan Cooling System and HVAC Parts Near 18842\nKeep your engine cool and your cabin comfortable. Stay on top of your engine cooling system and HVAC with everything from water pumps and radiators to A/C condenser fans and heater hoses. Low coolant levels can cause your engine to overheat. Or, you might have a coolant leak. Consider replacing cooling system parts. These signals tend to be pretty noticeable, but there can be other signs you may need new Nissan HVAC parts. Is the A/C barely blowing air? Odd smell stinking up your cabin? Sounds like the right time for some new HVAC components. Purchase Nissan HVAC parts online, and turn to your 18842-area service center for installation. The situation could be as simple as repairing a small leak in the A/C system or as difficult as installing a new compressor mount and fitting.\nPurchase Nissan Batteries and Electrical Parts Near 18842\nMany 18842 drivers choose to replace their Nissan battery at home, and they start with Nissan Parts & Accessories. Nissan Genuine Batteries are designed to meet your vehicle's original specifications. Nissan batteries come with an 84-month Limited Warranty , and we also carry related parts you may need to go along with a car battery, like battery hold-down frames, clamps, and covers. Without a strong, working car battery, your Nissan can't power any electrical systems. If you've replaced your car battery and still have trouble with one of these electrical components, it might be time to upgrade your Nissan electrical system. Buy Nissan car batteries, wiring, and electrical parts near 18842 and contact your Nissan dealer with questions.\nPurchase Nissan Transmission and Driveline Parts Near 18842\nThe Nissan transmission and driveline ensure the perfect amount of power is sent to your wheels for the desired speed. Every nut, gasket, and bolt needs to match your Nissan perfectly for this important system to function properly. Turn to genuine Nissan for manufacturer-approved, custom-designed, and custom-fitted transmission parts like the axle, differential, and driveshaft. As nuanced and involved as the system can be, it's also easy to find the right Nissan transmission parts near 18842. Shop online and enjoy reliable fitment.\nBuy Parts for Nissan Electric Vehicles Near 18842\nNissan Parts & Accessories is the place to go for electric vehicle parts near 18842, too! From tail light to headlight, you'll find everything you need to maintain or upgrade your Electric LEAF. Nissan replacement parts help make sure each adventure is as electrifying as the last. Shop online for Nissan LEAF electric car parts, and turn to your 18842-area Nissan service center for expert advice on low voltage and high voltage parts and maintenance.\nFind Nissan Dealer Auto Parts Near 18842\nIt's easier than you think to buy genuine Nissan parts near 18842. Purchase all kinds of Nissan parts online and have them shipped to your home, or pick them up at your local Nissan dealership near 18842. Nissan Parts & Accessories website is the site to visit when you want to order Nissan parts near South Gibson. Browse often for our latest discounts, and shop today to support your Nissan's stand-out performance for miles to come.", "label": "Yes"}
+{"text": "SENSiA Reach Trucks & Multi-Way Reach Trucks\nA warehouse can only perform as effectively as its trucks and their drivers. That’s why every Mitsubishi reach truck is specially engineered to take any operator’s performance to the next level. Generous on operator space and comfort, SENSiA drives productivity higher through its futuristic fingertip control system – the most sensitive and accurate in the world. With its progressive, modulated fingertip response curves, it delivers a ‘feel’ and an accuracy that put drivers in total control. Together with the BE ergonomic armrest, SENSiA ensures operators stay focused, safe and productive – even through the longest shifts.\nWith class-leading travel speeds of up to 14km/h, SENSiA EM reach trucks are easily tailored to your needs with a choice of three performance modes. While experienced drivers will fully exploit the high-performance capability of the Professional (PRO) mode, new or inexperienced warehouse staff will respond to the Ecologic (ECO) mode which has been configured to work naturally and economically in any environment. For more specific needs, the truck’s settings can be customised by a service engineer.\nThe Mitsubishi SENSiA EX multi-way reach truck range is ideal for precise and intuitive handling of wide and unusual loads of up to 2500 kg – and lifting up to 10 metres – in narrow aisles and on long shifts. Six multi-directional travel modes, all-wheel steering and braking and powerful AC traction combine to deliver exceptionally agile, high-intensity performance. Its wide forks make long handling exact and effortless. Comfortable and spacious, the award-winning SENSiA cabin, SDS and operator controls provides excellent all-round visibility and minimises operator fatigue.\nProducts In The SENSiA Range\nKey Features for the SENSiA Range\n- High efficiency regenerative braking means effective control and reduced brake wear.\n- Load wheel brakes give extra braking power and deliver agile performance (H and X models only).\n- Powerful AC drive motor provides high torque, even at fast speeds, for rapid acceleration and smooth, quiet, controlled, efficient operation – and lowers service costs.\n- High energy drive motors and hydraulic systems deliver exceptional shift length between charges or changes.\n- Choice of two driving modes (ECO and PRO) tailors the truck’s performance profile to your precise needs.\n- PRO mode with high performance settings gives experienced operators complete control of the truck’s efficiency and performance.\n- ECO driving mode encourages natural, efficient operations – reducing fuel costs.\n- Cornering control optimises speed on curves for efficient and stable performance even at fast travel speeds.\n- Six multiway driving modes, instantly selected by keypad – reach truck, lateral, parallel, auto-transition, rotational and agile cornering.\n- Mitsubishi SDS (Sensitive Drive System) provides intuitive driver-assist with graduated performance management according to steer angle, foot and finger actuator velocity – significantly contributing to safety.\n- Wide drive wheel provides dependable traction and heat distribution to extend wheel life.\n- Next-generation 360° load wheels with independently controlled steer motors.\n- Load wheels turn within chassis leg profile for added protection of wheels and loads.\n- Powerful AC drive motors and ZAPI controller.\nElectrical and Control Systems\n- Sensitive Drive System (SDS) offers precise control of mast and truck behaviours for accurate, smooth and stable performance.\n- Passive Sway Control (PSC) significantly reduces the risk of sway to safeguard lives and loads.\n- Award-winning Active Sway Control (ASC) available as an option offers further protection, reducing delays caused by mast sway, and ensures accurate, smooth and stable performance.\n- CAN bus system reduces wiring and makes fault finding quick and simple.\n- Maintenance interval calculator encourages correct servicing, for optimum component life and minimum downtime.\n- Temperature control in drive and lift motors and controllers – prevents damage from overheating.\n- Tilting battery cover gives quick, easy access for maintenance and charging.\n- Battery rollers make changes quick, easy and safe.\n- AC power on all motors delivers smooth performance, high torque and precise control – through the longest shifts.\n- High performance ZAPI motor drive controller delivers robust and efficient traction control.\n- Site-specific performance characteristics are quickly set by service engineer.\n- DIN standard battery compartment for widest choice of motive power.\n- Broad battery change rollers are standard in all models.\n- Six multiway travel modes, instantly selected by keypad – reach truck, lateral, parallel, auto-transition, rotational and agile cornering.\nFrame and Body\n- Exceptional visibility through clear-view overhead guard ensures precise handling with total confidence.\n- Choice of 2000kg and 2500kg capacities for optimum application configuration.\n- Robust chassis and carriage construction for inherent strength and high residual values.\n- Strong battery lock mechanism contributes to safety.\n- RapidAccess ‘tilt-swing’ access panels, seat and steering column provide quick and easy access to inside the truck.\n- Powerful AC hydraulic motor with extra-strength pump on H models provides high torque for rapid but smooth – and controlled – lifting and lowering.\n- Mitsubishi SDS provides extremely accurate, intuitive control of hydraulic functions.\n- Quick and easy access for routine fluid level checks.\nMast and Fork Assembly\n- Revolutionary VisionMast offers unrivalled forward vision and superb lifting ability.\n- Clear-view fork carriage with integral side shift offers optimal visibility of forks at first stacking level.\n- Exceptionally smooth ‘no knock’ transition between mast stages – ideal for handling fragile goods – ensures controlled performance.\n- Smooth mast handling system on lift and reach for steady, predictable and precise handling.\n- Wide fork positioner with up to 2200mm spread and fork tilt for handling both long loads and standard pallets.\n- Passive Sway Control dampens any elevated load motion by allowing the chassis to move slightly to compensate.\n- Impressive mast lift and lower speeds empowers high productivity.\n- Electronic mast cushioning at top and bottom of travel avoids end-of-range jolting and further reduces load oscillation.\n- Long-life reach roller rails and rapid part exchange minimises maintenance hours.\n- Lift heights up to 10 metres for higher handling.\n- Lift height indicator on main screen display.\nOperator Compartment and Controls\n- Spacious and comfortable cabin, clear view and fast, accurate fork positioning increases productivity and reduces risks of driver fatigue – even on the longest shifts.\n- Easy-access cabin with ergonomic hand bars and low non-slip step provides safe and effortless entry.\n- Folding steering wheel console with adjustment for column length and angle, lifts up for easy access and ensures optimum position for each driver.\n- Full-suspension, fully adjustable seat keeps driver safe, comfortable and alert through the longest shifts. (Luxury seat with lumbar support, electrical height adjustment and air or mechanical suspension is available as option.)\n- Ergonomic armrest matches driver’s natural operating position and is fully adjustable – reducing fatigue.\n- Multifunctional armrest controls prevent unnecessary finger movements for safe and productive operations.\n- Patented fingertip control system with modulated response curves is optimised for natural movement – for precise, effortless control.\n- Easy-to-understand display communicates key information to driver including guidance, warnings and alarms – encouraging good practice.\n- Low noise technology means sound level at operator’s ear is no louder than a typical conversation.\n- Multi-functional armrest with four-fingertip control keeps control for reach, lift, tilt, fork positioning, direction and horn all at the driver’s constant touch.\n- Multi-way-mode keypad control is within driver’s easy reach – for easy selection of its 6 travel modes.\n- Cabin shape keeps operator within truck profile to help protect from injury.\n- Safety pedal requires minimal pressure but ensures the driver’s leg is not outside truck profile in operation.\n- EcoLogic and Professional modes (ECO/PRO) are quickly selectable by operator for extended shift life or enhanced performance.\n- Ergonomic pedal set design is specially weighted, sized, angled, curved and grooved for natural use and minimal fatigue.\n- Clearview overhead guard has slim angled slats for optimal driver upward view with uncompromised safety.\n- Solid overhead guard panel above driver for additional safety without restricting visibility.\n- Low-effort, small-radius steering wheel is comfortably positioned and effortless to operate.\n- Wide, deep and low step for easy driver access.\n- Generous driver storage spaces for documents, tools, pens etc.\n- QuickLocker for convenient stowage of small items.\n- Removable cup/drink holder for easy, hygienic cleaning.\n- Low dashboard allows unobstructed forwards view to low loads.\n- SoftTouch cabin surfaces contribute to a comfortable working environment.\n- Multi-lingual screen in over 20 languages.\n- Twin entrance handgrips widen driver approach angle and increase operator protection.\n- Contactless pedal sensor delivers long service life.\n- Unlimited 360-degree all-wheel steering gives precise control with minimal effort.\n- Progressive steering enables easy manoeuvring at low speeds and effortless control when moving at speed.\n- Unlimited 360-degree electric steering gives precise control with minimal effort.\n- Progressive steering enables easy manoeuvring at low speeds and effortless control when moving at speed.\n- Onboard weighing system (+/- 50kg) helps driver to identify overweight loads.\n- Load check scale (+/- 50kg) helps driver to identify overweight loads.\n- BlueSpot pedestrian warning system alerts co-workers to trucks operating nearby.\n- Working/drive lights to improve visibility in dark environments.\n- Wide choice of seats, armrests and headrests for maximum comfort and maximum fatigue.\n- Convenient USB Power socket for phone charging or other 5V personal equipment.\n- Audio system and 3.5mm input jack for MP3 player etc.\n- Choice of fork positioner widths (1700mm or 2200mm)\n- Choice of key switch or PIN code access\n- Choice of 2000kg and 2500kg capacities\n- Choice of masts up to 10.0m\n- Extra hydraulic valve and hosing to fork carriage\n- Telescopic forks\n- Camera with monitor\n- Lifting height indicator and pre height selector\n- Side shift and tilt centering\n- Choice of suspension seats (air or mechanical)\n- Audio system with AUX input\n- Scale (tolerance +/- 25 kg)\n- Quick battery locking system, foot operated\n- Cold store modification package\n- Hot environment modification\n- DC/DC converter with USB power supply for mobile or PC\n- Customer name/logo/artwork on side panels\n- Company or brand designed side covers\n- Cold store cabin (Not available for compact ‘C’ models)\nEnquire About This Range\nOver 30 Years’ Experience in our Industry\nMulty Lift Forktrucks Limited was founded in 1986 in the Midlands and is still a family run/privately owned business offering outstanding local service backed by a Global Brand.\nTrusted Mitsubishi Dealers\nMulty Lift is recognised as one of the UK’s largest independent Forklift Truck Dealers stocking the entire range of Mitsubishi Material Handling Equipment.\nQuality Used Equipment for Sale\nNot only do we supply new Mitsubishi equipment, we also stock a wide range of competitively priced Used Material Handling Equipment available for purchase, contract rental or short term hire.\nMulty Lift Forktrucks Ltd are the Midlands leading Mitsubishi Forklift dealer.\nPlease browse our website and contact us should you have any questions.\nMulty Lift Forktrucks Ltd\nUnit 4, Gilbert Way\nBurma Road Industrial Est.\n01623 794 094", "label": "Yes"}
+{"text": "3D Car Parking is a 3D car simulator game. This game simulates various parking skill. Control your car with an steering wheel, acceleration and brake pedals. Shift the gear to forward or backward as you need. 3D Car Parking Game Features - 20 different game levels - Realistic car driving experience - Perfect 3D HD graphics - 2 different car (Sport car, classical car) - Real car sounds - Different cam angle - Realistic steering wheel - Perfect car physic and car simulation Brace yourself to fun with the newest, unique car parking game of 2014. 3D Car Parking.\nDownloads: 36,248+ (for Android)Report app for spam or abuse!\nFree Sonic Mania Plus apk download android mobile Free\nSonic Mania Plus mobile download for android and ios phones and tablets", "label": "Yes"}
+{"text": "The Insurance Institute for Highway Protection regularly updates its crash checks to improved align with the realities of American roadways. The newest revision focuses on facet impacts, and it appears that lower ride heights may perhaps be giving midsize sedans some serious trouble.\nThe IIHS this 7 days posted the benefits of a sequence of crash assessments, where by midsize sedans had been pitted in opposition to the Institute’s revised facet-impact crash examination. To superior simulate the ever-escalating share of SUVs, the IIHS boosted the speed of the collision (37 mph, up from 31 mph), as perfectly as the fat of the moving barrier (4,200 kilos, up from 3,300).\nOf the 7 automobiles place via this improved analysis, only one acquired the IIHS’ major score of Fantastic — the 2022 Subaru Outback, a greater-riding midsize wagon. The 2022 Hyundai Sonata and VW Jetta both of those earned the next-ideal Suitable ranking, for the reason that the crash exam associated a bit extra cabin intrusion. The IIHS mentioned that all 3 autos experienced head-shielding airbags that performed nicely.\nIn the base 50 % of the score spectrum, the Honda Accord managed a rating of Marginal. The worst performers have been the Chevy Malibu, Nissan Altima and Toyota Camry, which were being all rated Lousy.\nOn the Accord, the B-pillar manufactured its way into the cabin a little bit, and the driver-side dummy’s head skipped its airbag and smacked the windowsill. The Altima and Malibu experienced “substantial” cabin intrusion, according to the IIHS. And all three Poor-rated automobiles had the exact same challenge as the Accord, where the dummy’s head skipped the aspect airbag and hit anything a great deal harder.\nAs the IIHS notes, all 7 of these cars received a score of Very good in the previous aspect crash check.\nAppropriate now, none of the vehicles talked about — or any of the other courses of car examined hence far — will reduce their existing Best Basic safety Choose or Top rated Basic safety Choose Plus rankings. Nonetheless, that could improve in 2023, when this check is formally additional to the typical IIHS routine. At that issue, automobiles will need to have to score Excellent or Acceptable to get paid Top rated Protection Decide, and Very good will be necessary if a auto desires to accomplish Top rated Protection Choose As well as.", "label": "Yes"}
+{"text": "82.The Volkswagen emissions scandal has brought the integrity of the auto sector into disrepute. VW’s conduct since the scandal has only served to further damage its reputation. It has communicated poorly with customers which has led to confusion over when and how affected vehicles will be fixed. Furthermore, VW has not been open about the nature of the defeat device software that it installed in millions of vehicles worldwide. Instead of answering many of our questions directly, VW asked us to await the results of an internal investigation by Jones Day. We do not believe that the internal investigation will provide the answers that are needed urgently. VW has used the investigative process to make announcements that only served to exonerate senior management. Approval authorities and regulators cannot depend on VW to co-operate and in this report we have called upon the Department for Transport to use its powers and resources to properly investigate VW which we believe it has failed to do, so far.\n83.The type-approval framework requires a great deal of improvement before it can be considered fit for purpose. We welcomed the introduction of Real Driving Emissions Testing and the implementation of the Worldwide Light-vehicle Test procedure. Standards agreed globally are worth pursuing. It is important that the negotiations are transparent and open and that the genuine concerns of motor manufacturers are balanced against the importance of safety and environmental policy goals of a global testing system. We are concerned the EU’s method of policy making has not had that level of transparency and the motor industry has had too much influence over how emissions limits are set and the timescales for implementation.\n84.The fine detail of the new emissions tests is still to be agreed and the Department for Transport must do everything in its power to ensure that they are implemented with sufficient stringency. Little was done to address the emissions gap before the Volkswagen Group emissions scandal drew public attention to the deficiencies in current tests. The emissions gap was the result of a failure to keep pace with vehicle technology. The only way to overcome that problem in future is through rigorous scrutiny by approval authorities operating in a system of consistent standards that has opportunities to share information and report the impact of new vehicle technologies on the effectiveness of existing regulation. A failure to do that will only result in the stringency of the new reforms becoming obsolete in years to come.\n85.The Volkswagen emissions scandal would not have been revealed by any of the approval authorities or technical services under the current framework. It is apparent that the potential for manufacturers to use defeat device software or other dubious emission control strategies were known for many years. Since the VW scandal broke other questionable practices by a range of manufacturers have come to light. Testing can only ever be a sampling approach and it is vital that there is a system of effective in-service surveillance that will detect where tested vehicles are not performing as they should in real-world conditions. As vehicle technology becomes increasingly complex in-service surveillance must become a far greater priority for approval authorities. Had approval authorities made greater efforts to be seen to be looking for cheats, the current regulatory crisis could have been avoided or at least significantly reduced.\n12 July 2016", "label": "Yes"}
+{"text": "Switzer Performance Announces New R1KX 1000 Horsepower Nissan GT-R\nThe temptation of over twelve-hundred raucous horsepower.\nSince releasing its 1000+ whp R1KX performance PKG in 2010, Oberlin Ohio’s Switzer Performance has established itself as a known name in GTR tuning.\nDespite the temptation of over twelve-hundred raucous horsepower, though, Tym Switzer believes the all-out performance level of the R1KX GTRs and the recurring maintenance and support are not what the majority of their clients really want.\n“Far too often,” explains Tym, “I talk to people who think that what they want is that last thousandth of a second, regardless of the cost. For the few that can really wrap their heads around what that means – that the car will shift abruptly, that it’ll run hot in traffic, and that they’ll have to run specialized racing fuels in order to get the most out of the car and keep it happy. For them, our R1KX or XXX GTRs will give them what they want: the baddest, fastest GTR that money can buy. For people who want a 1000+ horsepower car that they can drive comfortably every day, to the track or the office or the grocery store, on the highway or in bumper-to-bumper traffic, we’ve built this car.”\n“Usable and practical is exactly what we wanted out of the USEs, and we’ve finally gotten these to the point we want them,” Explains Switzer, who is calling its latest new GTR performance variant the “Ultimate Street Edition” GTR, with a heavy emphasis on the “Street” part.", "label": "Yes"}
+{"text": "- published: 23 Sep 2012\n- views: 4982\nGetting ready for qualifying..\nThe Lucas Oil Products Mayfest Drag Boat Festival presented by Canidae from Firebird International Raceway in Chandler, AZ featured on the Lucas Oil Motorsports Hour. Pro Modified, Top Alcohol Flat, Top Alcohol Hydro, and Top Fuel Hydro boats.\nA look at the fastest race boats in the world!", "label": "Yes"}
+{"text": "Hyundai Accent Engine Accessories\nFeatured Engine Accessories Products\nFrancisco, M - (Snoqualmie, WA)\nI like it!\nThis Mugen knock off made my civic look so much better. I am glad to find you guys on Google.\nHigh quality OE replacement corner light. Way cheaper than the factory replacement from the dealership\ndrew - (San Francisco,califo)\ngreat coils, ive had mine on full stiffness since ive bought them which was about 8 months ago and there still solid, highly recommend these\nGrace, L - (Grand Pass, MO)\nJacob Finley - (St Louis)\nPretty good quality finish, great fit, weave is okay, and it's the only option out there that I know of which explains the high price (-1 star).\n40 reviews 4.5 out of 5 stars", "label": "Yes"}
+{"text": "VW Golf GTI TCR will become a decent alternative to Golf R, but with front-wheel drive and 286 hp.\nVolkswagen introduced the most powerful version of Golf GTI – TCR. The hatchback will have a 2-liter unit and a turbocharger. The power will be transmitted to the front axle via a seven-speed twin-clutch automatic transmission. With its 286 hp, the TCR has a total of 44 hp more than a standard GTI or just 10 hp less than Golf R.\nThe car will accelerate to 100 km/h for 5.6 seconds and the maximum speed will be limited to 250 km/h.\nThe new VW Golf GTI TCR arrives with several cosmetic exterior changes. These include a new spoiler, diffuser, and black mirrors. Other interesting improvements are limited slip differential and front brake discs.\nIn Germany, they already take orders for the powerful Golf, starting at 38,000 EUR.", "label": "Yes"}
+{"text": "Service department at Carmax superceded my expectations! Called to have a service done on my Nissan and they were able to accommodate my tight schedule even though they did explain their schedules were tight as well. The amount of time I waited was far less than any dealer I've ever been to, and Dave in the service department greeted me by name and wore a smile until I left! They even washed my car for me and let me know if there was anything I needed to not hesitate to give them a call.\nI bought a 2015 Chrysler 300 S . I had a problem with the smart key. They owner, Johnny Dangerfield, solved the problem with my Smart Key and also gave me an extra Smart Key , free of charge. My entire experience there was great.\nWe bought a car from Brad Braun at Charleston Nissan on 5/16/17. Wow we were very pleased with the deal that Brad was able to give us. We were treated like family and he went above and beyond to make sure he got us just what we wanted for the price we were looking for. He even came in to work on his birthday to make sure we were taken care of. My hat goes off to the finance guy Ron who also helped tremendously . Wonderful people at Charleston Nissan. Will tell everyone about them.\nFriendly staff, excellent service. Worth the trip!\nby Keenan Nale from Moncks Corner, SC\nMay 27, 2018\nHad a really good experience at Berkeley Ford. Mark was my salesman and the sales manager was Stanley. Both id a fantastic job getting me more than i could ask for. every one there was very nice and professional. I've visited most dealerships in Charleston, and this one was by far the best customer experience. It felt like a family bushiness, not a large dealership.\n* Title, other fees, and incentives are not included in this calculation, which is an estimate only. Monthly payment estimates are for illustrative purposes only and do not represent a financing offer from the seller. Other taxes may apply.\nThe information on vehicles provided in this service is supplied by the seller or other third\nparties; Cars.com is not responsible for the accuracy of such information. Cars.com provides\nservice and materials without representations or warranties of any kind, either expressed or\nSee our terms of service for more details.", "label": "Yes"}
+{"text": "\"Tackle\" is about one particular inch across and a few inches deep, quite thick metallic...flat but one edge features a perpendicular flange about 3/8 inch. No marks on cope with. I do think bike is actually a 1986 Schwinn Dash made by Huge, with 24\" wheels made in Taiwan by Femco (tire size a difficulty). I have a electronic Photograph but it really would not paste right here. Wha... Study a lot more >>\nYou'll be able to Pick from our normal laser wheel alignment on your entrance axle or computerised alignment for front and rear axles for more precise adjustments to carry your vehicle again to its first manufacturing facility settings.\nAfter i bought the truck back the camber was constructive some levels. Not Awful, simply enough to find out by eye. I instructed the tech they needed to do it once more. He claimed he can only set it to manufacturing facility specs. :\nThe paper is here. Toe is calculated straight from the wheels to a reference line. Camber can be a measurement of vertical angle. And caster is indirectly calculated from a pair of camber measurements at recognised front wheel turn angles. To measure camber angles an accurate way of measuring nearly vertical angles must be utilised. There are many camber gauges available on the market, based on spirit ranges, plumb-bobs and this kind of. I failed to wish to invest in a person, favoring generating my own incredibly specific 1. I also was searching for a fascinating task to work with my desktop CNC mill (see image).\nIt may be extra, but Because the pads have worn all over the width in the rim, there's no unworn segment to check it to. I could evaluate the thickness using a micrometer.... Browse far more >>\nIf you think that the camber is off, shift your automobile forward or backward adequate to spin the tires half a transform, then check out measuring once more.[fourteen] Issues with camber, entrance or rear, can have an effect on how your car handles.[fifteen]. Concurrently, on the other hand, Except if your car is in a significant incident, it's unlikely that your camber is going to be significantly away from alignment.\nLighting Remedy for 2 article lifts and cellular column lifts, universal all-in-one Option. Equipped with four magnetic mounting clips for positioning of lights accurately where you will need it, no drilling straightforward mounting process. Trim 1” diameter design and style can make it feasible to light up even challenging to reach compact Extra resources spots.\nThis is often genius and I'm able to’t imagine no person else has at any time came up with it. Your program is smart. I’ve read some color principle/Strategies from consultants online that sound so in depth but doesn’t make any perception and isn’t in any way practical. Virtually as though The purpose is to confuse the reader.\n\"I had been afraid which i was planning to have just take my truck to an auto professional. I discovered this article, and it answered most of my queries. Many thanks.\"...\" more JM Jozzy Mathibela\nThey are able to definitely get it done, It really is just that they're also lazy to obtain it at actual specs as opposed to what's \"within just\" specs. I have some postive camber likewise but was \"inside of specs\" from my local firestone.\nThe outer circles stand for by far the most valuable whites from blue white to greige with accurate white, the white you would use to compare to many of the Some others, on the surface ring.\nEven so, in case you don’t do as much highway driving, and tend to perform plenty of hard cornering on the street (not that I'd personally ever advocate this type of detail) and/or autocross frequently, you can obtain absent by using a great deal extra adverse camber and your tires will don evenly owing for your driving model. If that’s the sort of driver that you are, you can obtain away with as much as about –1.8 to –2.0 levels utmost without uneven tire dress in.\nHe didn’t invent these chemical things. What he did was analyze them so thoroughly that he found styles in how they were being configured And the way they behaved.\nThis really is your camber. Repeat with the other entrance wheel. The 2 wheels need to be in regards to the identical and throughout the assortment specified by your guide. If not, your camber might need alignment. Repeat the process within the back.\nSo if you rely on it for everyday driving be actual very careful about what you need to do, but if you can make it a undertaking that does not need to be driven day to day you could experiment!\nUsing this package around the 2014 is there any issue While using the driveshaft needing to be shortened? Also does the package keep the rear wheels centered within the wheel effectively?\nWhat you will be describing is definitely the “Chevy Lean” and albeit all trucks are afflicted with a “lean”. You just don’t see it at inventory trip peak but a three/four″ lean is very standard! Trucks and cars are all asymmetrical, meaning the drivers side (on chevy’s) is heavier typically as a result of fuel tank than the passenger side. There are several reasons why trucks or vehicles don’t have fantastic symmetrical weight distribution, batteries, ac compressors, coil springs all becoming correct hand wound, and so forth.\nYou contacted us @ firstname.lastname@example.org and received the subsequent “The measurement around the interior barring is 1.374″. Our course of action is that every part is inspected however it’s the accountability of someone to do it so you know the way that is definitely. We stand at the rear of our item and will make it appropriate in almost any case. As an installer you will take some emery cloth ( the kind they use for copper pipe it’s about one 1/two″ vast and is available in a roll) you ought to make use of the roughest yow will discover sixty is okay and just sand a tad .\nIt leans for the left probably due to the fuel tank. Pretty much all Silverado’s and Sierra’s are afflicted from the “Chevy Lean”. Definitely all trucks (and automobiles) lean to one facet or one other (not just Chevy’s) as well as best method to right the lean would be to shim up the lower side utilizing a brief piece of heater hose being a shim on a single finish with the coil spring within the very low aspect while in the front. Just have a foot or so of heater hose, slice it on one side and slip it over 1 end if the coil spring tape it in place and set it back again from the truck.\nI by now aligned it and I had been on the lookout to install my two″ lowering shackles in the rear to stage it out. I had been wanting to know if I reduced the rear would I must get Yet another alignment or does it not outcome the front conclusion.\nI much like the glance from the truck just want it a couple of inches decrease. Would you suggest an entire kit or am i able to get away with just The three inch drop i-beams?\nThe flip kit lowers the rear around 6″ plus the shackles elevate it again up to what at any time peak you prefer (by adjusting length with hole preference). Here is a url for the flip kit so you could find out more! Excellent luck.\nJuan Penaloza claims: February twelve, 2014 at 8:fifty nine pm I've a 2000 Chevy Silverado that I reduced about 9 months ago. I didn't do any investigation about the lowering kits. I live in this article in southern California and purchased a 3 / four reducing package from Crown supsension in Brea Ca. Because they are area and close to me, they gave me a good a deal but I’m not happy with the package because the coils inside the front make my truck rattle and bounce. I'm not satisfied with the coils in any way. I was investigating your 4 / 6 reducing kit and likewise did some study and browse some good and undesirable issues about your package. I have read through some varieties that say your decreased Management arms have alignment problems, And that i also read through that they're great with manufacturing unit specs.\nThe R&D operate finished on the Tacoma was done with a box inventory truck, Hence the manufacturing facility wheels and tires must be no problem. You furthermore may below “typical driving disorders” must not concern yourself with the rear finish hitting the mattress, the bump stops will prevent the suspension right before Call is created! Certainly In case you are actively playing “Dukes of Hazard” with it you might knowledge other troubles!!\nTake a look at all the kits by clicking here! It actually doesn’t issue which tire and wheel combo that you are or are going to be jogging to concerning what kit to select apart from to be certain the wheels are made on your S-ten! Very good luck, and if you want more enable allow me to know!!\nI purchased the subsequent part quantities from Stylin’ Trucks. I ordered the areas different since their Web page did not present a whole kit for my truck. I ordered the next aspect numbers for any 2007 Silverado.\nexamining on decreasing springs and many say the ride might be inventory or far better plus some say the trip might be like Driving within a logging truck then there was the shocks problem new great shocks are about 60% considerably less then 2in drop shocks just after checking the spec uncovered the following inventory shock Extended Size:13.\nThe front i-beams move the king pin mount up three″ so it is best to receive a three″ fall using all other manufacturing facility pieces. Around the rear, the hanger shackle package moves the leaf spring mounts up over the body so yet Check THESE Guys Out again It is just a mechanical fall.\nStay with the manufacturing facility units and your good. During the rear the 2 shocks you requested are common truck shocks and are the right size with the rear reducing kit you are likely to put in! Great luck and ship an image!\nYou should utilize any of your ninety nine-06 Silverado kits, that may be If the Denali is 2WD! I didn’t Consider to question you in advance of. There are not a great deal of 07 Denali classic select ups so sorry for each of the thoughts. Click the link to find out what is available for your truck.\nWe establish a four″ front drop package that mixes a set of two″ coil springs by using a two″ Calmax decrease Management arm along with a Calmax upper Regulate arm.The decreased arm and the coil supply you with the 4″ fall while the higher arms supplies more than enough alignment adjustment to help you established the alignment to factory numbers plus the higher arms established the higher ball joint angle to provide the maximum range of movement.\nThe store that did the install says the pinion angle is good but The 2 piece travel shaft seems like it is probably not aligned straight. I did somewhat investigating and found where a carrier bearing adjustment may possibly have to be designed to raise the carrier up to the truck. Do you're thinking that This is able to assist me and if so is there a package with the 2014s To accomplish this? Thanks ahead of time for the reply i would want to get this determined just before some thing is ruined.\nI purchased the truck obviouly to haul stuff around the house when required probably even a small trailer. so i want stiff more than enough to hadle the load and not jumpy\nRight after cruising your site, Right before I buy, I want to know if they're the proper shocks. 1415 Calmax Supershox with the front. 2200 Calmax Supershox for your rear.\nIt is possible to I suppose really put in equally spindles and Handle arms on the identical truck, neither areas are designed to operate with each other to reduced even so.\nBy using a four/seven drop you might want to shell out shut interest into the wheel and tire sizing. Speak with your local tire dude and see If you're able to Learn how shut you can find with what you need. In case your selection is bigger you'll have considerably less vacation and you could have something, somewhere, making Call!\nMany thanks in your concern, dropping 4WD’s is a bit trickier and you'll want to mistake on the conservative aspect. Obtaining mentioned that, we have discovered from feed-back and tests the 3″ rear coil spring setup rides enormously better than the 4″ spring within the 2WD platforms.\nThis kit on the truck does not need shorter shocks! So For those who have a superb list of shocks, no difficulty. On the S-10/Sonoma trucks you may get by with inventory length shocks, continue to keep if intellect nevertheless if you need or want new shocks People are the correct part figures!!\nWhat I want to find out is you present drop leaf springs to mix with this particular package to get the desired fall. Want the flip kit\nMy issue is concerning the addition of 1 of the rear anti-sway bars. From what I’ve browse you men have built the bar to operate Together with the decreased suspension but I planned to know if I will operate into clearance/mounting challenges With all the factory spare tire and factory tow hitch receiver?\nZach suggests: June 21, 2012 at four:22 pm Thanks for that suggestions, Mark. I apologize for the next e-mail, I wasn’t absolutely sure in the event you obtained the primary one And that i am a little impatient In relation to things such as this. I obtained to state, one other day I lined my truck up with An additional just like mine, but with inventory suspension. I used to be flabbergasted cuz my truck was only an inch shorter than one other but the opposite truck is rollin on shorter tires than visit this link mine.\nThe king pin i-beam trucks don’t have any way to adjust camber or caster, so you must persist with manufacturing unit size coils, sorry. Mark\nMy problem is, will the upper control arms that suit to the 98 Silverado similar to my Tahoe? Id like to exchange every little thing without delay and given that I are unable to discover any other tubular control arms for mine, It will be great if they would. Many thanks for your time and effort.\nIn other words, does your upper Management arm position the ball joint further out from your body then the manufacturing unit higher Management arm??\nIn some cases men and women say they don’t align but we don’t know why they are saying that, We now have an alignment rack in our R&D place and design and style our kits around being able to align to manufacturing facility specs for all trucks. I drove the white 99 silverado Together with the 4/six package for years with out issues. In truth that is the truck which was accustomed to layout the kits for ninety nine-06 sliverado’s!\nIf the operating the spindle Along with the factory coil then all you will need is usually a list of two″ Calmax arms. You will want to go back to your manufacturing facility spindle, and also you don’t must operate upper arms Except if your performing it styling motives! Look into the decisions you've correct listed here!!\nSorry to report that we don’t Have a very package that could decrease a 4WD F250. We can easily do 2WD nevertheless the 4WD front finish differs. I am not aware of any kits for the 4WD I-BEAM trucks, that doesn’t mean they don’t exist I've just by no means ran across them. Retain searching and maybe you'll find a good one!\nNormally the washers are cosy not authentic limited. The cross shaft has to go so the Command arm can pivot up and down. When there is Participate in in the shaft having said that which is to free advert it is best to tighten it up by releasing the set screws and tightening the top bolts then tighten the established screws to complete.\nHow are you about to “un-notch” your body? Should you have Slash the frame you would probably want to bolster the body at that time! Concerning the rear shocks they mount from the factory mounts and they're the correct length to operate With all the four″ hanger & shackle package in your Ford F100.\nThe man advised me not to make it happen there mainly because it’s not stock top and it might throw off their Laptop. My problem is where can I get an alignment performed ideal for reduced suvs?\nJohn says: March eight, 2015 at 9:eleven pm Hey I've a question on my 1990 Chevy Silverado c1500 Along with the djm flip kit.. I've 2in drop shackles and also the 6in flip kit I’ve change the shock on the belltec Road performance shock n it however ride incredibly bounce while in the rear.. I’m outta selection on this. Any enable could be pretty helpful pls!!.. Thanks for your time\nIs the manufacturing facility tire to tall? What or my selections to alleviate many of the rubbing with the rear and leading of fender very well.\nIve recognized by way of your fellas’s kits Why Not Try These Out i havent witnessed or read about camber bushing, which feels like alot less complicated do the job to manage. Now my problem is would you fellas Believe once i install the camber bushings, will my stance straighten up? Or what does one men advocate?\nOur part quantity is 2200 for the right in shape over a 99 Superduty with our kit. Just click on the section amount and away you go! Thanks for the interest!!\nI’ve searched this issue on the web and there happen to be studies of the happening when the auto is decreased but not one person appears to have a solution. The truck hasn't been wrecked. I've taken it to a entire body store and an alignment store plus they couldn’t decide what was wrong with it either. What results in this change which is there a method to correct it?\nSo I am knowledgeable about the whole process of pulling apart the suspension (springs, coils, spindles, Handle arms and so on.) Just want to make sure I am Prepared for this undertaking prior to I enter into the heat with the battle.\nTo check lateral adjustment, place the guidebook near to the rim sidewall and search for top places on either aspect. To accurate a left or right significant place, tighten the spoke that results in the opposing hub flange and Similarly loosen the spoke that brings about the hub flange on the identical side as being the significant location.\n.. The true challenge is on the nose in the crank, the clearance in between the nose of your crank along with the part that drives the oil pump inner equipment was much too loose. The inner circumference of the oil pump internal generate gear was in fact way too much larger than the outer total circumference of your crank nose. The extra Perform had no effect on the motor at minimal RPM, but at high…\nShe is an everyday guest on major news and early morning reveals, discussing the most up-to-date updates on autos and vehicle financing that can help drivers make good decisions when getting, preserving and financing automobiles.\nModern day vehicles' controls are now standardised, including the location with the accelerator and brake, but this wasn't constantly the case. Controls are evolving in response to new systems, as an example the electric vehicle and The mixing of mobile communications.\nwarranty and extra alignments carried out cost-free for this defined period. Additionally, there are extended agreements available which could help you save you dollars in the long run if you push normally or Should the roads in your town are undesirable. These contracts are offered for three many years with a few deciding on to supply a life time ensure.\nFor years I have liked the seem of the Liquid crystal display display during the R34, and a few months again I noticed a picture on the web of the purple R33 in Hong Kong where someone had retro-fitted the MFD. Considering that then, I knew I needed to do the conversion myself..\nIf you can't weld, then You will need to purchase a lock bar, or maybe a package such as Drift functions HICAS eliminator assembly. Possibly approach is productive.\nIt is possible to begin to see the inlet duct for your rear from the rotors within the left. I suppose it could be named a “bridge port”. There’s some scuffing through the rotors, but absolutely nothing you may feel using a fingernail. Even then, this pump has a lot of volume more than a s…\nI use my auto for function and put on several miles swiftly. I generate on tough gravel streets which are tricky on tires and these have held up very well for me. I also run into hazardous driving resulting from climate because of like ice and flooding.\nYou should print or reserve Exclusive and present it at time of generate-up. One particular coupon per order and can't be combined with almost every other give. Excludes Tax and store supplies. See your assistance advisor for aspects.\nten) Set up wheels with lug nuts but only finger restricted. (Just just in case you figure out that you need to Pop Over To This Site modify the bushings some much more) (Whatever you do before you decide to drive the automobile ensure that lug nuts are tightened to specification.)\nAnalysis into potential option varieties of electrical power include things like the development of gas cells, Homogeneous demand compression ignition (HCCI), stirling engines,[sixty] and even utilizing the saved Vitality of compressed air or liquid nitrogen.\nDVD Volume one This video is accessible on DVD Wheel truing is a fragile procedure that needs time and patience. During this tutorial I will try to show the numerous aspects as Plainly as you can. Ideally you'll want to have a wheel truing stand, very good lights and a cushty workspace.\nWe supply the complete line of Chevy models, together with used and Licensed pre-owned autos. Crossroads Chevy also has Accredited support, parts, and finance departments. Horsepower calculations according to trim motor configuration. Gas economic climate calculations depending on first manufacturer details for trim engine configuration. You should ensure the precision of your incorporated gear by calling us prior to get.", "label": "Yes"}
+{"text": "Base pricing for the Genesis G90 starts at $89,750 in Canada, $72,950 in the US.\nThe G90 is available in one single completely loaded version in Canada.\nLike the G70, brand recognition is its only real shortcoming.\nMany of us have forgotten what the definition of “comfortable” actually is. If our couches were as “comfortable” as the average automobile, we’d throw them out or not buy them at all. It will have taken Hyundai’s luxury brand to remind us all what it truly means to be in a comfortable car. This is the new 2021 Genesis G90.\nComfort, like all things automotive, has evolved over the last few decades. As cars got more powerful and heavy, changes had to be made to their chassis to enable them to handle, quite literally, these extra burdens. One direct consequence was a near-complete loss of plushness even for luxury cars priced below $150,000 or so. With today’s new structures, the game has changed.\nBut even so, less than a handful of OEMs have gone as far as Genesis to deliver a car that hovers above the ground as does the G90. While this luxury sedan’s extensive wheelbase helps level out the road’s surface, it’s the included adaptive control suspension whisks occupants away to a more civilized time. Coupled with the extensive use of sound-deadening techniques and the Genesis G90 becomes a quiet and comfortable retreat from the outside world.\nLuxurious to drive\nDrivability and handling have also progressed which is why the Genesis G90 is also a competent driving car. It doesn’t float about or roll onto its sides, or ever feel out of sorts even when driven “hard.” But, the fact of the matter is that the G90 never begs to be pushed.\nDespite the presence of its creamy-smooth naturally-aspirated 5.0-litre V8, I simply desired to bask in the princely task of driving the G90. The engine’s 420 horsepower and 383 lb.-ft. of torque are far more potent than the power-to-weight ratio suggests. At 5,000 lbs, the G90 gets up to speed with authority, and a soothing hum, thanks to the 8-speed automatic transmission. At the risk of losing credibility, the 2021 Genesis G90 is fun to drive.\nSpending time within the cabin rivals and may even surpass being the driver – this is one of the rare cars that I would not mind driving or being driven in. The acres of Nappa leather, Havana Brown for this test unit, is quilted to perfection and beautifully matched to the open pore olive ash wood trim. The attention to detail and fit and finish are on par with anything that comes from Germany. All four outboard seating positions are heated, cooled, and multi-way power-adjustable. You might imagine that the seats are also quite comfortable, and you’d be right. Driven or driving, the G90 is pure serenity.\nThe level of standard features included with the G90 5.0 Prestige AWD is huge. The 12.3-inch touchscreen display with navigation is certainly a highlight, as is the 17-speaker 900-watt Lexicon surround-sound audio system. The driver seat even features Smart Posture Care, through the 22-way settings, the seat ergonomically calibrates an ideal seat positioning for you. Once set up, the technology auto-adjusts the steering wheel, outside mirror, and Heads-up Display specifically to your configuration.\nGenesis doing its thing\nThe Genesis G90’s interior design, technology, and layout are at the crossroads between technology and conventional luxury. This blending of ways is progressive and one that will not alienate anyone.\nAs for styling, the 2021 Genesis G90 goes one of two ways. At first, I will admit that the diamond-inspired Genesis Crest Grille was beyond bold, as in far too exaggerated. I have however come to see that this car is distinct and sports its own language. Details like the G-matrix patterned quad headlamps, LED side repeaters, and superb also G-matrix patterned inspired staggered 19-inch wheels further distinguish the G90.\nWhat Genesis has done and is doing is taking chances with design elements that are slightly outside of the comfort zone established by the German automakers. For taking these risks, Genesis deserves a par on the back.\nThe Genesis approach\nBoldly taking on the Mercedes-Benz S-Class, BMW 7 Series and the Audi A8 is a challenging task, to say the least. And while flagship luxury sedan buyers may scoff at the Genesis, the truth is that the G90 is every bit as premium and refined as its competitors, for far less money. Sample it and you’ll get it.\nThe final element about Genesis and the G90 is how simple true luxury can, and should be. With only one trim offered in Canada and an all-encompassing price (with 5 years of included maintenance, plus At Home Valet Service with courtesy car), the whole transaction process can literally be done in minutes. If time is luxury, then it doesn’t get more premium than Genesis.", "label": "Yes"}
+{"text": "\"There’s a lot of pressure for a sequel to perform, yet comic book movie franchises seem keen to push their product out over and over again, weaving ever more tech and intricacy into their storylines. Often, after the building \"\nQWest – a new breed of coachbuilder for a new millennium\nNeed more space in a Tesla Model S?\nThere’s something familiar about the roads leading to QWest’s HQ.\nNestled in a part of Norfolk that is neither flat, city, nor Broadland, these are the roads upon which some incredible cars have been honed to perfection over the last century. And it’s along these winding rural slithers you find QWest, a company which has taken a different stance to performance vehicle design than the locals’ previous efforts.\nQWest aren’t obsessing about lap times and minimalism – but that does not mean they aren’t obsessed with keeping weight low and performance high, because they are. They’re just doing so in a much more practical package, and one which should look after the world in which it’s been created. They’re making an estate version of the incredibly popular and effective Tesla Model S. And they’re already getting order enquiries from across Europe and beyond.\nAs with all great ideas, it happened in a pub – where a Tesla Model S owner happened to mention there was no room for their dogs in the back of the car. To the team who went on to become Qwest – this sounded like a gauntlet being thrown down.\nWith a network of contacts including the illustrious Jim Router, who had previously worked with McLaren on the F1, TWR on a few Le Mans cars, Colin Chapman on the Delorean and many other incredible projects including alt-fuel trailblazers Riversimple, the Qwest team began the task of converting a Model S.\nStarting as they meant to go on by using cutting edge CAD programming to ensure minimal tolerances, using carbon fibre to add more body, and Pilkington to create and homologise the necessary glazing and ensure its availability worldwide, the designs started to take shape.\n“We wanted the design to look like a flying scarf,” advised Jim Router, “and so created a unique flow across the roofline.”\nThis design certainly adds a sense of speed to the overall look, as confirmed by their 1:10 scale design model.\n“What we didn’t anticipate,” Jim continued, “was there being slight differences in each of two the donor cars we used.”\nThis minor flaw in the Tesla Model S design (or build quality for these examples, maybe) was a small hiccup and easily overcome by the designs for the QWest, and showed that the accuracy the QWest team is working toward is even greater than Tesla itself.\n“The roof spoiler will be fitted too, as per the model,” Jim explained, “and that will include the antenna. We’ll also be removing the chrome strips you see around the windows and making them black.”\nIt had became clear by this point that this was a cool car, designed to look super slick, and no stone had been left unturned.\n“We’ve had enquires from Norway, Sweden, Spain, the UK of course,” advised Dorian Hindmarsh, who is managing the project, “and we’ll be aiming to build around 25 per year. We won’t be building from scratch, but can turn around a customer’s existing Model S in as little as 10 weeks. At the moment the only thing stopping us finishing this particular one is getting the first batch of glass in from Pilkington, and getting the paintwork done. It’s not a very long process, really.”\nAnd that’s going to be crucial – Dorian and the team know people won’t want to be without their cars for long, and even for such a unique vehicle, modern life means time is of the essence.\n“We’ll be aiming for three distinct lifestyles to begin with,” he continued, “there’s the Urban version, for a Model S owner who either just needs the extra space, or simply prefers the looks and feel of a ‘shooting brake’. Next there’s the Surf version for a mariner/water focused-lifestyle market, for which we could produce a vehicle befitting their hobby. Next, the Forest – muddy boots and venturing off the tarmac. But anything is possible – these are really just examples. It’ll all be bespoke and what a customer wants and needs.”\n“Options are endless,” he happily added, “performance should not be affected as we’re using lightweight carbon parts to replace the metal.”\nThese are cars designed to go fast anyway, and knowing that Jim has history with so many sports cars, including Audi’s 1999 Le Mans challenger and the Panoz Le Mans entries, he’s fully aware of the need for stability at high speed, and the designs will make sure the Qwest feels every bit as stable – or even more so – than the Model S it was created from.\n“We’re pleased to be the first to do this,” Dorian added, “and with the moulds in place for the carbon – which is produced locally by CODEM Composites Ltd in Huntingdon – we are setting our sights on becoming the preferred coachbuilder on EV platforms.”\nI asked about converting the upcoming Model 3 – but Dorian was not so sure the market was there.\n“It can be done, certainly,” he said, “but as the Model 3 is set to be so much cheaper than the Model S, we’re not sure many people would want to pay to have QWest convert it. That said, we are taking delivery of one soon for a study exercise.”\nThis is clearly a very high-quality conversion, and although Dorian wouldn’t be pushed to give me a cost for the Model S conversion (they’re still doing the sums themselves), it’s clear you get what you pay for. They simply wouldn’t be willing to cut corners to get the cost down to make a lowcost Model 3 viable – and that’s reassuring.\nI’m looking forward to seeing where the project will take them, and as I drove back from my visit along those familiar Norfolk roads I wondered how many years it would be before the sound of sports car exhausts echoing around these parts would be replaced by the silent waft of much faster, much more efficient, and much more cosseting vehicles.\nIt also occurred to me that maybe this is not just the start of converting EVs to suit customers’ needs, but a re-emergence of cool shooting brake coachbuilders, too.\nCLICK TO ENLARGE", "label": "Yes"}
+{"text": "The average listing price on SpeedList for this year, make, and model is $93,966.\nThis vehicle has been on SpeedList for 38 days.\n4.3L V8 DOHC 32V\n3rd Row Seats Adjustable Seats Adjustable Steering Air Bag(s) Air Conditioning 3rd Row Seats Adjustable Seats Adjustable Steering Air Bag(s) Air Conditioning All Wheel Steering Anti-Lock Brakes Auto Dimming Mirrors Automatic Headlights Interval Wipers Power Seat(s) Rear Spoiler Removable Top Steering Mounted Controls Tire Pressure Monitor Back-up Camera Bluetooth Body Side Moulding CD Changer CD Player Cargo Box Center Console Child Proof Locks Climate Control Cruise Control DVD Player Disc Brakes Driver-Assist System Dual Climate Control Emergency Braking Preparation Fog Lights Front & Rear A/C Front Bucket Seats Full Carpeting HID Headlights Hands-free Entry Heated Mirror(s) Heated Rear Seats Heated Seats Keyless Entry LED Taillights Lane Keeping Assist System Leather Upholstery Luggage Rack Map Light Moonroof Navigation System One-Touch Power Windows Power Brakes Power Convertible Top Power Locks Power Mirror(s) Power Outlets (12V) Power Steering Power Windows Premium Sound System Premium Wheels Push Button Start Rear Defroster Rear Parking Assist Remote Fuel Door Remote Trunk Release Satellite Radio Seat Memory Security System Side Airbags SiriusXM Stability Control Sunroof Super Charger Tachometer Tinted Glass Tire Pressure Monitoring System Touchscreen Navigation Towing Package Traction Control Trip Computer Turn Signal Mirrors Universal Remote Transmitter Vanity Mirrors Read More…\nYou will instantly feel at home once you step into this Ferrari California GT 7-Speed Manual. You can breathe easy knowing that the 'new car' smell is genuine because thankfully the former owner was not a smoker. It has also been meticulou...\nYou will instantly feel at home once you step into this Ferrari California GT 7-Speed Manual. You can breathe easy knowing that the 'new car' smell is genuine because thankfully the former owner was not a smoker. It has also been meticulously maintained, and we have the complete SERVICE HISTORY to prove it. Like all the vehicles that we sell, this one has been through a thorough MULTI-POINT INSPECTION by our skilled technicians to be certain that it is of the highest quality. Safety is at the top of every vehicle buyer's list, and we here at Merlex Auto Group will verify that this car has never been in a wreck of any kind. Looking for power? Look no further! This 4.3L V8 DOHC 32V engine has all the power that you want in a vehicle. Don't let the road dictate your drive, take control of it with this fine tuned suspension. One thing we can assure you of is that pampered luxury is what this ride is all about. Compared with other car's out there, you will not find another better equipped Ferrari California GT 7-Speed Manual at the price we are offering. We have gone over this car with a fine tooth comb and can assure you that everything under the hood is in perfect working order. We have made sure that this Ferrari has kept its same faultless beauty as when it first rolled out the factory doors. One way to judge how well a car has been cared for and that is how clean the interior is. This one is nothing less than impeccable. The road has been great to this one and everything is in proper working order. Appearance can mean a lot. This exterior is free of rust, dents, and dings but does have some minor blemishes barely noticeable to the naked eye. The interior shows only the slightest amount of wear and is in excellent overall condition. Don't be left in the dark with a purchase, we can shine some light by including our STANDARD WARRANTY on this car. For more information, stop by or give us a call. Optional EXTENDED WARRANTIES are available for purchase upon request. Don't let credit stand in the way of you getting the vehicle you want. We have GUARANTEED FINANCING on this vehicle or any other on our lot. Are you a bargain shopper? We have a deal for you. This car is beneath the BLUE BOOK value. With amazing deals at Merlex Auto Group, you will be sure to drive away smiling. We are conveniently located near Silver Spring.", "label": "Yes"}
+{"text": "1948 Chrysler Town & Country Convertible - Jay Leno's Garage\n1948 Chrysler Town & Country Convertible. Goodguys founder Gary Meadors\nstops by with restorer Scott Bonowski and perhaps the most amazing restomod\nyou've ever seen. Three years ago, Gary bought this woody on eBay sight\nunseen. Now it looks bone stock - but wait 'til you see what's under the\n» Subscribe: http://bit.ly/JLGSubscribe\n» Visit the Official Site: http://bit.ly/JLGOfficialSite\nTHE BEST OF JAY LENO'S GARAGE\n» Exclusive First Looks: http://bit.ly/JLGExclusives\n» Ultra Rare Supercars: http://bit.ly/JLGSupercars\n» Jay's Book Club: http://bit.ly/JLGBookClub\nJAY LENO'S GARAGE ON SOCIAL\nFollow Jay: http://Twitter.com/LenosGarage\nLike Jay: http://Facebook.com/JayLenosGarage\nABOUT JAY LENO'S GARAGE\nA new video every Sunday! Visit Jay Leno's Garage, the Emmy-winning series\nwhere Jay Leno gives car reviews, motorcycle reviews, compares cars, and\nshares his passion and expertise on anything that rolls, explodes, and\nmakes noise. Classic cars, restomods, super cars like the McLaren P1,\nsports cars like Porsche 918 Spyder and Camaro Z28, cafe racers, vintage\ncars, and much, much more. Subscribe for more: http://full.sc/JD4OF8\nNBC ON SOCIAL:\nNBC YouTube: http://full.sc/MtLxIM\nNBC Facebook: http://facebook.com/NBC\nNBC Twitter: http://twitter.com/NBC\nNBC Google+: https://plus.google.com/+NBC/posts\n1948 Chrysler Town & Country Convertible - Jay Leno's Garage\nJay Leno's Garage\n2014 Chrysler Town and Country Limited | MacIver Dodge Jeep | Newmarket Ontario\nThis is a walk around of a brand new 2014 Chrysler Town and Country Limited\nin Brilliant Black brought to you by www.MacIverDodgeJeep.com!\nGood Credit, Bad Credit, No Credit, No Problem! MacIver Dodge Jeep is a\nDodge Dealer in Newmarket Ontario serving Newmarket, Aurora, Sutton,\nBarrie, Richmond Hill, Keswick, Mississauga, Orillia, Toronto, Markham, and\nsurrounding area's for over 30 years. Visit us across from the Upper\nCanada Mall or call 1-800-803-8831 TODAY!\n2012 Chrysler Town and Country Minivan - Walk Around\nYou really get a good look at this vehicle with Chads FULL WALKAROUND\nVIDEO! Broken Down in Layman's Terms for easy understanding.. Call today\nfor your test drive at 1(800)580-9165 / www.NewRiverAutoMall.com\n2014 Chrysler Town & Country S Minivan Review\nhttp://www.autobytel.com/?id=32972 According to the sales sheets, the\nChrysler Town & Country and its sister the Dodge Grand Caravan are the\nbest-selling minivans in America. But what you don't know is the fact that\na slice of those sales figures represent the fact that this minivan ends up\nas a rental or fleet vehicle. Still the 2014 Chrysler Town & Country S is a\ngreat minivan. Prices on the Town & Country range from $30,765 - $41,595.\nUnder the hood is a 3.6 liter Pentastar V-6 engine that makes 283 horsepower which is a lot\nfor the minivan segment. Fuel economy is not so great at 17 MPG in the city\nand 25 MPG on the highway. A big benefit is the amount of cargo room that\nthanks to the stow & go seating. Minivans are not intended to be the most\nexciting cars to drive. That being said; the 2014 Chrysler Town & Country S\nfeels athletic and handles great thank to the excellent suspension.\nSee More Car Videos\nJoin Our Facebook Page\n2015 The New Chrysler Town and Country Limited First Look Redesign Price Specs\n2015 The New Chrysler Town and Country Limited First Look Redesign Price\nSpecs - 2015 Chrysler Town & Country -- Release Date\nby Admin on MARCH 7, 2014 in CHRYSLER\nAfter the merger of companies, Chrysler and Fiat, it was announced the\nproduction of 2015 Chrysler Town & Country model. The creation of this\nalliance, the company Chrysler has recovered from financial difficulties.\nContinuation of production of some Chrysler models, has been brought into\nquestion. 2015 Chrysler Town & Country will be representative of the sixth\ngeneration of this model. This popular MPV will appear on the market\ncompletely redesigned, equipped with a new engine and placed on a new\nChrysler Town & Country model is present for more than 25 years. During\nthis time , this model has gone through five generations. The latest\ngeneration appeared on the market in 2011. Brought with it a number of\nimprovements. Town & Country model has got many features of an SUV, and\nmany added to it the title of \"luxury\". 2015 Chrysler Town & Country will\nbe placed on the new E-EVO platform.\nImpact of Fiat, was significant in the development of model of other\ncompanies in the Alliance. It was announced that the Chrysler Town &\nCountry or Dodge Grand Caravan model to be withdrawn from production.\nCompanies Dodge and Chrysler belong to the same alliance. Fiat did not want\nthat model from the same corporation, are mutual competitors in the market.\nIt is now clear that the 2015 Town & Country comes into the market more\nmodern and better than ever before. Dodge Grand Caravan will also continue\nwith the production, but will be in the SUV category.\n2015 Chrysler Town & Country -- Engines\n2015 Chrysler Town & Country will launch upgraded 3.2 L Pentastar V6\nengine. This engine, combined with a 9-speed automatic transmission,\ndevelops 271 hp and 239 lb.-ft. of torque at 4400 rpm. The vehicle has the\noption of 4×2 and 4×4 drive. This engine replaced the 4.0 L V6 engine\nthat was responsible for running the Town & Country Limited Edition model.\nThe combination of the new engine, transmission and enhanced propulsion\nsystem will provide improved vehicle performance. 2015 Chrysler Town &\nCountry model with 3.2 L Pentastar V6 engine will be available for\ncustomers on the U.S. market.\nThis model will be offered with a 3.0L GM diesel engine, on the markets of\nAsia, Africa and the Middle East. On the European market, 2015 Chrysler\nTown & Country, will be sold under the name Lancia Grand Voyager. The\nEuropean version of the car will dispose of the 2.8 L turbo diesel engine and 6-speed transmission.\n2015 Chrysler Town & Country will be built at Windsor Assembly plant in\nOntario-Canada. Town & Country model is produced in this facility since\n2008. Then production moved from St.Luisa in Ontario. Presentation and\nstart selling of 2015 Chrysler Town & Country model are expected in 2015.\nIncoming search terms:\n2015 chrysler town and country\nchrysler town and country 2015\n2015 town and country release date\n2015 chrysler town & country\n2015 chrysler town and country release date\n2015 dodge grand caravan\n2015 town and country\nlancia voyager 2015\n2015 chrysler town and country redesign\n2015 town and country review\n2013 Chrysler Town & Country Test Drive and Minivan Video Review\nminivan has been a staple in the automotive landscape since the 1980's.\nThese vehicles fulfill a need and even if they are not the prettiest thing\nto look at, they do meet the needs of millions of families. Over the past\nfew years though, there has been a resurgence in the minivan category and\nthe new vehicles hitting the road are packed with as much convenience and\ntechnology as many luxury cars. The Chrysler Town & Country is one such\nautomobile. The base price on a 2013 Chrysler Town & Country is just over\n$30k, but you can easily spec one out to $45k by adding all the bells and\nwhistles. Still, these represent a great value and meet the needs of those\nwho have to transport a family.\nOwning a minivan (especially for a younger person) used to be a scary\nthought. Now though, times have changed. The 2013 Chrysler Town & Country\nis about more than hauling family around. The minivan has become today's\nmodern utility vehicles. On the outside, Chrysler recognizable design\nfeatures like the front grill are evident. Along the side there are various\nchrome elements. Though there is not a lot of form there is a ton of\nfunction. Just using the key fob you can open and close the 2 sliding doors\nand the rear hatch.\nUnder the hood of the 2013 Chrysler Town & Country is a 3.6 liter V-6\nengine that is capable of making 283 horsepower and 260 lb-ft. of\ntorque. The transmission is a 6-speed automatic. Fuel economy is 17 MPG in\nthe city and 25 MPG on the highway.\nOn the inside of the Town & Country there is a whole lot going on just as\nyou would expect. There is rear seat entertainment with flip down video\nscreens, climate control, and comfortable captain's chairs in the second\nrow. The 3rd row of seats can be stowed flat with the touch of a button\nwhich gives you tons of cargo space. The driver also enjoys a ton of\nfeatures including comfortable seats, navigation screen, blind sport\nmonitoring, and more.\nThe 2013 Chrysler Town & Country is an adequate minivan for the segment.\nBut at the $43k as test price this automobile should be a bit more refined.\nThere are some great features, but there are other auto manufacturers\nlooking to get a piece of the pie. That said, the Town & Country is still\none of the best vehicles on the planet to transport people.\nSee More Car Videos\nJoin Our Facebook Page\nChrysler blower resistor\nIf your heater blower only blows on high speed, most likely the blower\nresistor is bad. But, to be sure you must test it. Here is how to find\nit, test it, and replace it\nDodge Caravan, Chrysler Town and Country & Plymouth Voyager History 1984-2012\nhttp://www.carwp.blogspot.com All Car Wallpapers Free Download!\nDodge Caravan, Chrysler Town and Country & Plymouth Voyager History\n1983 Dodge Caravan\n1984 Dodge Caravan\n1984 Plymouth Voyager & Lee Iacocca\n1985 Dodge Caravan LE\n1985 Plymouth Voyager\n1986 Dodge Caravan\n1986 Plymouth Voyager\n1987 Dodge Caravan\n1988 Dodge Caravan\n1989 Dodge Caravan 3.0 V6 Mitsubishi 138 cv\n1989 Plymouth Voyager III Concept\n1990 Dodge Grand Caravan: + 40 cm\n1991 Dodge Caravan ABS & Airbag\n1991 Dodge Caravan\n1993 Plymouth Voyager 2.5 turbo\n1995 Chrysler Town and Country 2.5 turbo\n1996 Dodge Grand Caravan ES\n1996 Dodge Grand Caravan LE\n1996 Dodge Grand Caravan\n1997 Chrysler Town and Country LXi\n1997 Dodge Grand Caravan\n1998 Chrysler Caravan LX AWD 3.8 V6 180 cv on 16 - Brasil\n1998 Dodge Caravan\n1998 Plymouth Voyager\n1999 Dodge Caravan RT Concept 4.0 V6 263 cv on 20\"\n2000 Dodge Grand Caravan ES\n2001 Chrysler Town and Country Natrium Concept 35 kw Siemens 130 kmh\n2001 Dodge Caravan 4 generations\n2001 Dodge Caravan\n2001 Dodge Grand Caravan ES\n2004 Chrysler Voyager\n2004 Dodge Caravan SXT\n2005 Chrysler Town and Country\n2005 Dodge Grand Caravan\n2007 Dodge Caravan C/V\n2008 Chrysler Town and Country 3.8 V6\n2008 Dodge Caravan 254 cv\n2011 Chrysler Town and Country\n2011 Dodge Grand Caravan RT\n2011 Dodge Grand Caravan\n2012 Lancia Grand Voyager\nHow to Fix a Chrysler Blower Fan That Only Works on High\nIn this video, I demonstrate how to diagnose and repair a bad blower pack\nresistor in a 2002 Chrysler Sebring. This is a common problem to have the\nblower pack resistor go bad on these Chrysler vehicles. This circuit design\nuses the switch to control the resistance in the ground side of the\ncircuit. So testing for continuity to ground on each of the pins of the\nresistor pack is a good way to confirm that the switch is working correctly\nand the problem is the resistor pack itself.\nI am not responsible for any mishaps that may have occurred from following\nthese procedures. I do this to help you, the car owner, and cannot assume\nresponsibility for any problems. Please use this information to help\nyourself, good luck, and take care.", "label": "Yes"}
+{"text": "dirt racing just isn't skill based, its all about how lucky you hit a certain bump and resulting in how fucked you are\nThis made me laugh, but it's also only true at first. Rally/dirt racing is like anything else: you have to learn the track. In the case of rally racing, it's more learning the terrain than the corners and is why there are rarely racecar drivers that do both. The mindsets are completely different, the responses to vehicle physics are completely different, and the only real thing in common is getting there the fastest. It doesn't mean a rally racer can't learn circuit racing, or that a circuit racer can't learn rally, but they are drastically different in real life execution because of what you described. This is why rally racers have a co-pilot, too, because the terrain is your real challenge moreso than the corners.\nIf I had to describe it at its core, rally racing is more about predicting what your car will do and anticipating it, and circuit racing is more on-the-fly response to pushing a vehicle to its very limit. Example: when you hit a bump and go airborne in rally racing, you literally have ZERO control over the vehicle until it lands, so you try to adjust your throttle and steering position for the landing; on a circuit, you try to take the corner as fast as possible, but human error may cause you to slightly push the throttle a smidge hard and your rear end starts to come loose, but if you have the response time of a cat, you quickly counter-steer and correct to maintain control of the vehicle at its limit of traction.\nI hope that helps you do more dirt racing lol\nBruh, by that token, literally any part of the game you didn't play is \"bloat\" lol... Come on, man, just let people have their options\nBut also, now you're asking them to have a full character creation suite when they are already doing more than literally any other racing game does for your driver. And actualyyyy, you missed out on FH4 if you wanted \"hang out\" stuff: FH4 had actual car meets. I barely used it, but it was actually quite a neat idea to be able to see each other's car in a (small) parking lot hahaha\nI'm pretty sure the density is based off graphics settings, but then again I've been maxing games out for so long or just playing them on consoles that I'm not entirely sure why you're having low traffic offline. I'd say check your graphics settings or settings in general, there might be a traffic density setting.\nAs for the AI, it DOES have questionable power levels, BUT I'll also say that this goes into custom modding the car versus auto upgrading. If you auto upgrade and say, it adds better brakes and a spoiler, that obviously makes you better at slowing down and taking corners. Auto-upgrade is a general sweep, and I've always custom modded for things I knew would give me an advantage. For sprint races with minimal sharp corners, I'd upgrade mostly power and my Drivatars are on Highly Skilled and Expert (depending on the race, I find dirt races on Expert to be too sweaty) and would pull them on straightaways while they would take the corners better but not quite make up the difference. This is that subtle \"car enthusiast\" stuff I enjoy so much lol\nI'm glad you're giving it a fair shakedown, though! I never fault people for properly trying a game out even if they end up not enjoying it after all. Sometimes, well like a video I'm about to post: sometimes you don't know what you're in for in a game until you simply put the time in.\nIt's amazing how loading times change the perception of a game. I'm loving it a lot more now it's on my SSD, no more alt-tab killing time with something else in between the 2 to 3 minute races. Now it has flow! One race to the next. I also use one of the recommended cars now (Ford escort) which balances out the AI much better with a much nicer looking variety of cars as well. (A class). That Corvette Stingray can rest at the bottom of a Caldera :)\nMy issue with the bloat was, it's 109 GB, didn't fit on my SSD, so installed it on HDD which led to a poor experience. Hence being annoyed with all the customization options. Odd though that FS2020 still loads pretty much the same from HDD, yet for FH5 the difference is night and day. (3 minute load to main screen in FS2020 from SSD is just poor)\nI don't see any settings for traffic density, I have no idea what that's based on. When I started the game there were tons of cars on the road, all drivatars I think. Now I see maybe a dozen NPC cars at most while driving to the next race. Very empty. I'll turn head to head requests back on, maybe that brings the traffic back.\nNo traffic at all now and no other players either. No clue. Oh well, races have cars :)\nI'm not arguing the size of the game, just that \"bloat\" isn't really \"bloat\" just because you don't like, want, or use whatever it may be lol... By that token, all the sides quests in games are \"bloat\" for anyone that doesn't do those. I see \"bloat\" as things that literally do not factor into or serve the game whatsoever which is almost non-existent in gaming, but VERY existent in PCs you buy pre-built from large companies (which is why I build my own!). Bloat, meaning stupid software that does more to slow down my PC for the sake of some company to get my information and feed me ads or sell me things lmao...\nI guess my definition of \"bloat\" is closer to adware or spyware stuff, but yea, I don't really think a bunch of outfits really had that much impact on the game size lol", "label": "Yes"}
+{"text": "You may think of Classic Industries as the perfect place for restoration parts. Which we are not denying as they carry many great restoration products for our classic Mopars. With trusted brands like OER, AMD, Mopar Authentic Restoration Products and Mopar Officially Licensed Products you are sure to find what you need. But did you know they also carry many aftermarket and performance parts too?\nIf you are wanting classic muscle car performance and looks, they have plenty of parts to choose from. Looking for a Hurst shifter or maybe a new Flowmaster exhaust system? They have it. They even offer go-fast parts form Edelbrock to help spruce up that small block or big block under your hood.\nWhat if restomod is more your style, they have that covered too. With companies like Wilwood, Flaming River and Hotchkis you can update the steering, suspension and brakes to modern day performance. Wanting new wheels or modern gauges or they have that too. We were surprised ourselves of how many aftermarket companies Classic Industries carries.\nSo next time you are shopping around for parts for your Classic Mopar don’t forget to browse Classic Industries site. They have everything you need for restoration and performance all in one place. Did we mention you can normally find Classic Industries running a special deal that could knock a few bucks off the price and possibly free shipping? Don’t hesitate to order your restoration or restomod parts today.", "label": "Yes"}
+{"text": "Before you send your teen out on his or her own, it's important to discuss driving safely and the rules of the road. While most parents know this, they don't always remember to talk to their teens about what to do if their car were to break down on the side of the road. The last thing any parent wants is for their kid to be stranded. Use these tips to make sure your teen knows what to do is his or her car breaks down on the side of the road.\nTeach Your Teen How to Change a Tire\nBefore your teen starts driving without parental supervision, you should make sure he or she knows how to change a tire. This basic task could save your teen from needing to call a towing service to have the tire changed. Make sure your teen knows where the spare tire, jack, and tire iron are located, as well as how to use the jack safely. Walk through the entire process with your teen until he or she is confident enough to change the tire alone.\nProvide the Phone Number of a Towing Company\nIt's always good to have the contact of a local towing company, like Blue Eagle Towing, handy when your car breaks down. This way, you don't need to find a company that you can trust when you're aggravated and stressed. Choose a reputable local towing service, and have your teen save the phone number into his or her phone, so it's there if needed.\nTeach Your Teen How to Tell the Towing Service Their Location\nWhen you call a towing company from the side of the road, you need to be able to tell the company your location. If your teen is driving in the city, it isn't difficult. However, highway driving is a bit different. Explain to your teen what mile markers are, and how a mile marker makes it easy to locate on the highway. Make sure your teen knows to pay attention to mile markers and exit signs closely while driving, especially if there's any sign of problems with the vehicle.\nTalk About Carrying Emergency Cash\nIf your teen is broke, he or she won't be able to call a towing service for help. It's important to talk to your teen about carrying emergency cash or hiding it in the vehicle. If you want your teen to hide money in the vehicle, you need to be a little sneaky about it's hiding spot. This way, thieves aren't likely to steal the money. You don't want money sitting anywhere obvious. So if you're hiding it in the glove compartment, put it in an envelope and tape the envelope to the inside of the car's owner's manual or an old map. You can also hide money inside an object that thieves aren't likely to steal, such as an empty oil can or an old toy.\nTeaching your teen about what to do in an emergency situation isn't difficult, but it's often overlooked. So before your teen starts driving unsupervised, spend some time talking about what should be done if the car randomly breaks down on the side of the road.Share", "label": "Yes"}
+{"text": "The owner of a Koenigsegg CCR was not entirely happy with the power of his Swedish supercar. He wanted to improve the drivability and the appearance. Therefore he contacted Edo Competition.\nEdo Competition emphasized on the setup of twin superchargers, which force-fed the V8 engine. With some assistance from Koenigsegg, the tuner from Ahlen, Germany modified the drive ratio. Also the ECU was remapped to accommodate the hardware changes and the six-speed gearbox was enhanced as well.\nThese modifications are aimed to increase the power output while maintaining a broad torque curve over the whole rev range. With the new drive ratio the engine hits its torque peak of 900Nm earlier and puts out up to 891 horsepower, depending on the level of tune. In order to ensure long term reliability of the superchargers, the engine redline was lowered to 7,200rpm. Full boost pressure is now available from just 3,700rpm all the way up to 6,000rpm, which should result in a even more impressive acceleration.\nThe car does 0 – 100km/h in 3.2 seconds, 0 – 200km/h in 9.7 seconds and the 300km/h is will reached in 23 seconds. The top speed was reduced slightly from 394km/h to 390km/h.\nThe exterior and interior received a makeover as well. The wheels received a coat of charcoal paint. The updated front with auxiliary lights now resembles the later CCR models, and the Alcantara material that was used throughout the Koenigsegg’s cabin provides a more luxurious feel. The center console was redesigned to accommodates a new infotainment system including a reversing camera as well as a custom-made pouch for the immobilizer remote. A safety system now informs the driver about tire pressures and temperatures.\nIt seems like that Edo Competition has done it again, they managed to change an already impressive car into an even more impressive car.", "label": "Yes"}
+{"text": "MTC Japan Corporation ( Used cars Exporting Company Globally ) We are world wide Japanese used cars exporting company. HONDA CRV 2010 Neat & Clean Year Model available in Any Color with Affordable price X-MAS COLORFUL CARS WITH COLORFUL DEAL. Below are details. Engine: 2000 CC Edition :RE4 / RE3 Transmission: AT Mileage: 90,000 km Grade 4 4 Cylinder Petrol Engine. FOB PRICE $5,000 USD. **SHIPPING NOT INCLUDED**. *Best Quality* *Lowest Price* *Fastest Shipment* *RORO/Container Shipment* *Easy Payment Options* Kindly inbox if you like to order any car for your business or personal use.\nNeed to sell your car too?\nWe will help you!", "label": "Yes"}
+{"text": "For Sale: 99 camaro NASA AIX / AI\n$8k no motor, 416\" Skoggin Dickey LS3 w/4 hours $6k, $12k for both, or best offer.\nCan deliver anywhere. 561-307-0885 firstname.lastname@example.org\nThis item is USED\nTrades ACCEPTED: C5 or C6 vette (don't need title, motor, or exterior body), small japanese 4x4, late model luxury sedan, daytona 21 outboard or similar pickelfork boat, v-max v-rod or similar motorcycle\nAd posted by:\nMember Since: 2011-11-24\nPhone Number: (561) 307-0885\nNumber of Honor Payments: 0\nAverage Accepted Sale Price: $0.00\nAverage Honor Payment: $0.00\n- Member has no other classified ads.\nReport the sale - click here", "label": "Yes"}
+{"text": "August 5, 2013 - Industry News\nCon-way Truckload has announced it is investing in three safety technology systems for all of the 525 new tractors it will take delivery of in 2013.\nTags: Safety Technology, Fleets, Con-way Truckload, Bendix, Meritor Wabco, Takata, Electronic Stability Control, Collision Avoidance, Lane Departure Warning, Safety & Compliance\nWe offer e-newsletters that deliver targeted news and information for the entire fleet industry.\nThe expert, Mark Betner from Citgo will answer your questions Ask a question\nGlider-Kit Tractor to Demo Money-Saving Dual-Fuel System, Cab Heater\nPeterbilt's Model 567 in Full Production\nToyo M137 Steer Tire Now Available in 16-Ply\nCarrier’s Exhaust Emissions System Gets CARB Conditional Approval\nAero Clad Bumper for Peterbilt 367 and 587\nZenith Electric Van Claims High Operating Savings", "label": "Yes"}
+{"text": "There is 1 used car available matching your search.\nVolvo V40 CROSS COUNTRY 2.0 D3 Lux Geartronic 5dr (start/stop)\nOne Owner From New - Huge Spec\n- 2014 (14) reg\n- 27,087 miles\nOne Lady Owner From New, Full Service History, Bluetooth, Media Interface, Cruise Control, Panoramic Glass Sunroof, Digital Dash, Electric Memory Seats, Full Black Leather With Saddle Stitching, Elect...\nRepresentative finance example\n- V40 CROSS COUNTRY\nCash price Deposit Amount of credit Fees Total payable Term Fixed rate Representative APR 1st payment Monthly payment Final payment Annual mileageRepresentative finance example unavailable - try adjusting your example\nUsed cars for sale\nAt Auto Sussex we aim to bring you the widest choice of used cars in Billingshurst, West Sussex and at great prices. We have some fantastic deals on used VOLVO V40 CROSS COUNTRY cars, which are always changing. Browse our used cars below and contact us for more information on any of our second hand cars.\nWe are confident you will not be disappointed with our selection of quality used cars. At Auto Sussex we offer an extensive range of services and extras meaning that you can buy your used car with confidence and peace of mind. Our showroom in Billingshurst stocks a wide range of cars that are ready for viewing today.", "label": "Yes"}
+{"text": "The Texas State Fair has become like an auto show in recent years, with automakers using the event to announce new editions and updates to their trucks and traditional SUVs. This year was no different, as Nissan, Toyota, Ford, Chevy, and Ram all had news to share. The Lone Star State fair is the topic of this week's podcast episode, along with the larger question of why we Americans love trucks so much.\nMotor1.com Global Editor-in-Chief John Neff is joined this week by Writers Chris Smith and Chris Bruce to talk all things truck. The discussion begins in Texas, but by the end, the trio is talking about America's love affair with pickups and why it's so unwavering.\nAs always, we share some reader feedback on our last episode, and end the show with everyone's favorite segment, What We're Driving This Week. Smith had seat time in a big Chevy Suburban, while Bruce wound up watching other people drive last week at the National Auto Sport Association (NASA) Championships at Mid-Ohio Race Course. Neff, meanwhile, was driving a Nissan Pathfinder Rock Creek Edition last week, and has some thoughts on faux SUVs.", "label": "Yes"}
+{"text": "There was a time when I remember various of my neighbours spending Saturday or Sunday up to their elbows in oil and grease servicing the family car. The swearing was an education for me in more ways than one. Not only did I learn a number of terms rarely seen in books, but also helped confirm that I had little fascination for what went on underneath car bodywork.\nDo you remember your first new car? Mine was a metalic blue Fiesta Finesse which of course was my pride and joy. Servicing was done by the local Ford dealer which at that time was essential, not only to maintain the warranty, but also to have authorised stamps in the service book which affected the second-hand value. Given the poor service and value offered at our dealer I am glad to say that things have changed.\nTrue, cars are more complex nowadays, principally around the electronics. All modern cars have more electronics than the technology that put man on the moon. For a time, car manufacturers held their customers to ransom by forcing them to use their dealer network due to these complex systems which they claimed could only be properly looked after by them due to their specialist training and diagnostic equipment requirements. The EEC under their Block Exemption Rules changed all this which meant that servicing completed outside the dealer network (provided only authorised parts are used) is valid.\nThe electronics issue can still be a problem unless your independent specialist has invested in the equipment and training to allow him to interpret the error codes issued by your car's systems. I know that my engineer, Nick Connor of NC Engineering keeps fully up to date with the necessary technology. Moving outside the main dealer network is now not only possible, but a no-brainer as immediately you are not paying for the smart showrooms and operating theatre-style workshops. Hourly rates for main dealers vary considerably but can exceed £150 an hour A recent survey by Auto Express found charges up to £175 per hour.\nThere is also the issue of trust. I am certain many dealers are on the side of the motorist, only looking to complete the servicing schedule laid out for your car. But how do you know if the oil has actually been changed? New filters? Spark plugs? A good way to be more certain is to speak with the technician who did the service. Most people are too busy to bother, and this is where the temptation for getting a number of cars through every day can be too much for a guy who's salary has a targeted bonus element attached. Things get missed.\nNick charges are around £45 an hour and he can service and repair any make of car. He is particularly interested in keeping Mum's Taxi on the road and has the engineering expertise and integrity that comes from years in the industry. If you want you can look at his testimonials on his website and on thebestof Reading.\nCar servicing is not complex or any kind of 'black art' and whilst modern technology puts off the old fashioned weekend 'do-it-yourselfer', Nick is more than capable of keeping your wheels turning. On older cars where a bit more work may be required to get your family heirloom through the MOT, Nick again comes fully equipped to weld, re-fabricate, repair and machine the parts that wear out, rust and become dented over time.\nHe has even been known to build new cars from old and propel them with a roaring V8 engine down the track at Santa Pod - but perhaps that's a story for another day........\nMember since: 9th July 2012\nWith my wife Liz Noble, we re-started thebestofreading in November 2009 with a view to becoming the best marketing service for local companies in Reading - and offering the best local information for...", "label": "Yes"}
+{"text": "If you’re a Nissan owner, you may be wondering how to pay your bill online. Luckily, Nissan has made it easy to pay your bill online. All you need is your account number and billing zip code. Here’s a step-by-step guide on how to pay your Nissan bill online.\nnissan bill pay online in 3 quick steps including nissan finance make a payment, nissan login to my account, nissan finance payment, nissan financial phone number, nmac finance, nmac login, nissan motor acceptance corp, nmac finance account manager\nCheckout our official nissan online links below:\nHOW TO MAKE BILL PAYMENTS · Call 833-648-0173, or · Log on to the NMAC Finance Account Manager, Pay Now, then choose One-Time Payment.\nIf so equipped, you can manage your NissanConnect ® Services and NissanConnect EV subscription through your MyNISSAN account. Nissan safety recall & service …\nHow do I pay my Nissan car payment?\nUse your ATM/debit card or electronic check to make a payment over the phone or online (Paymentus® transaction fees may apply). Call 833-648-0173, or. To make a one-time payment, sign in to the NMAC Finance Account Manager and select Pay Now.\nDoes Nissan have an app to pay bill?\nAn existing NMAC customer can manage their account on the go with the Nissan Motor Acceptance Company (NMAC) Finance Account Manager app. We are now your one-stop shop for everything, from selecting the closest dealership to making a payment online.\nHow do I check my Nissan finance balance?\nTo sign up or log in to your customer portal, click the link below. Our customers can view and update information like Payout Quote through the Customer Portal. Balance Enquiry. Update contact details. Make a one-off payment to your account.\nHow do I find my Nissan finance Account Number?\nYour account number can be found in the “Account Information” section of your paper billing statement OR on the detachable coupon at the bottom of the statement.", "label": "Yes"}
+{"text": "Article By Ministry of Bikes\nPosted on 14 Nov 2016\nCould the Esse 9 from Energica become a production bike?\nEnergica, the producers of electric motorcycles presented a new concept model at EICMA this week to get an idea if they should put the bike into production.\nTime will tell whether or not the public would consider purchasing the motorcycle and the type of demand it will receive. If all goes well the manufacturers are set to start production early 2017.", "label": "Yes"}
+{"text": "The first definitive book covering the 911 3.2 Carrera. Written and compiled by Tony Corlett, this book covers one of the greatest Porsches ever made. From 1984 to 1989, this 911 represented the peak of 911 evolution and stands today as a great blend between the classic and modern 911.... (Hammill) 1275cc A-Series High-Performance Manual (Hammill) Camshafts a How to Choose aamp; Time them for Maximum Power (Hammill) .... (Tipler) Mitsubishi Lancer Evo, the road car aamp; WRC story (Long) MontlhAcry, the story of the Paris autodrome (Boddy) Moto Guzzi ... Definitive History 1987-1997 (Long) Porsche 911 a The Definitive History 1997-2004 (Long) Porsche 911SC a#39;Super Carreraa#39; a Theanbsp;...\n|Title||:||Porsche 911 3.2 Carrera|\n|Publisher||:||Veloce Publishing Ltd - 2005-06-24|", "label": "Yes"}
+{"text": "The auto industry has taken a financial beating over the last year, and the current climate is still shaky. However, Canada’s decision to buy a stake in General Motors Company is one that has benefitted the auto industry there, preserved jobs and helped the country as a whole.\nGM’s decision to buy out Suzuki Motor Corporation’s stake in the CAMI Automotive Incorporated plant in Ingersoll, Ontario and add a third shift and a new body shop was a positive sign for the Canadian government when considering bolstering the company financially. The Suzuki buy out now gives GM sole ownership of the CAMI facilities.\nOne other encouraging sign was the promise that GM would add another shift in 2011 in Oshawa to boost production of the Regal. GM also made prior promises to invest in other facilities in Canada.\nIn light of these announcements, Prime Minister Stephen Harper’s calls for bailout funds for GM were seen as financially sound. As a result, Canada acquired an 11.7% stake in exchange for $9.5 billion in supportive funds for GM. The move also meant that for the first time, a foreign government would have a seat on the board of directors of a major American company.\nOntario, which contributed approximately one third of the money, now has a 3.8% share of the Canadian stake in GM. Ontario Finance Minister Dwight Duncan says that Canada needs to protect the production facilities within its borders from repatriation.\nBefore GM filed bankruptcy, it threatened to do just that. Almost all of the 9,000 direct jobs lost would have been in Ontario. Duncan says that the cost of such a loss “would have been so much greater than the cost of loans and equity.”\nIn exchange for the funding, Canada receives an eight year guarantee that GM will continue production and investments in Canada, says Duncan. Officials say the decision has nothing to do with power and everything to do with saving the auto industry in Canada, which is crucial to the economy.\nIn order to preserve the 16% of GM’s North American production that takes place in Ontario, Canadian officials said they would lend an amount equal to 16% of what the U.S. Treasury loaned GM.\nChrysler also received more than $3 billion from the Canadian and Ontario governments equal to a 2% share in the company and one seat on the board of directors, occupied by George Gosbee, who founded Tristone Capital, Incorporated.\nDennis DesRosiers, an analyst for DesRosiers Automotive Consultants near Toronto believes that Canada had no other choice but to provide the funds to the ailing automakers.\nIn the past, vehicles made in Canada were generally considered domestic, and decisions affecting GM’s operations in Canada were made in the U.S. DesRosiers said, “Now we’re being considered a hard border. The U.S. is now seeing a Canada-built vehicle as foreign, when it didn’t a year ago.”\nCanadian politicians are confident the investments in the car companies will pay off. Echoing the sentiment expressed by President Obama, they say they have no intention of staying in the auto business, and plan on selling the shares in GM within eight years, with some allowances for extra time if market prices are too low.\nDesRosiers disagrees, saying, “This has got disaster written all over it.” He noted that Prime Minister Harper, who has already added the shares into the nations deficit, may lose his job if angry taxpayers rebel.", "label": "Yes"}
+{"text": "New reproduction front fender for the 1970 Plymouth Barracuda. Each fender is manufactured on our new tooling and features original body lines, braces, marker light holes, and headlamps buckets. Like all AMD parts, these fenders arrive in a black EDP Coat finish and will require standard prep work prior to paint.\nPlease note: These fenders will require two holes to be drilled for the installation of the headlamp bezel. This will allow for correct placement of the headlight bezel and avoid fighting with improperly placed holes. These fenders will also require modification where the bumper filler meets the fender below the headlight. With the fender mounted and the header panel in place, the holes for the bumper filler can be located and drilled to accept a sheet metal screw.\n1970 Plymouth Barracuda", "label": "Yes"}
+{"text": "Best Car Window Tinting in Dallas, TX - J's Tint & Car Audio, Custom Car Stereo & Tint, Alta Mere The Automotive Outfitters, Sound Depot, A Perfect Window Tint.\nReviews on Car Window Tint in Dallas, TX - J's Tint & Car Audio, Xtreme Auto Glass Pros - Dallas, Alta Mere the Automotive Outfitters, Tritek Window Tinting, Ace Window Tinting.\nFind window tinting in Dallas from MoonShadow Window Tinting. We provide commercial, residential, automotive, and decorative window tinting/ film services.\nTritek Window Tinting is the Dallas-Fort Worth metroplex's premier ... With our headquarters located in Garland, Texas; We are conveniently located.\nWe are the Dallas area's source for window tinting, car wraps, car stereo systems, custom wheels and rims, and more. Contact us today for a free estimate.\nDallas Window Tint has been established since 1996, but our installers have over 25 years ... At Dallas Window Tint we offer only the highest quality window films to insure our clients ... 10825 Plano Road, Dallas, Texas 75238, United States.\nLooking for DFW Window Tinting serving Dallas and the DFW Metroplex in Texas? Contact us today to schedule an appointment or learn more.\nHere in the Dallas area, the Texas sun and heat can be absolutely brutal. Not only will the beating sun chip away your car's paint, it will fade and bleach.\nCheck out this site before making purchases! It contains a wealth of usable auto window tinting information to help in your decision making for FREE!\nLLumar car window film from Pro Tint Glass Tinting in Plano reduces the UV rays, heat and glare that can make your drive in Dallas unbearable. ... but more important, it protects you from the heat and UV rays that accompany the Texas sun.\nBring it in for an inspection at MoonShadow Window Tinting in Dallas. If your car survives a scrape that damages your windshield, you'll want to head.\nTechnicians tint a choice of two front windows or all windows for a car, truck, or SUV. Dallas commercial and residential window tinting experts.\nFrom residential window tinting to commercial window tinting, we can do it all. ... roster, we offer an impressive selection of quality window films in Dallas, TX.", "label": "Yes"}
+{"text": "RAB Racing and Boris Said Receive First Career Win with Roush Yates Power  Mooresville, NC (August 30, 2010) Roush Yates Engines had a weekend full of victories, including first time winner Boris Said and team owner Robby Benton in the...\nRAB Racing and Boris Said Receive First Career Win with Roush Yates Power\nMooresville, NC (August 30, 2010) Roush Yates Engines had a weekend full of victories, including first time winner Boris Said and team owner Robby Benton in the NASCAR Nationwide Series.\nAfter 22 starts in the Nationwide Series, Boris Said took his Roush Yates powered Ford to Victory Lane on Sunday in the NAPA Auto Parts 200 at Circuit Gilles Villeneuve in Montreal. The event ended with an exciting drag race to the finish, where Said's Ford gave him the extra power needed to edge fellow driver Max Papis by inches across the start-finish line. The 0.12 second margin of victory was the closest ever on a road course in the Nationwide Series.\n\"I'm shocked........overwhelmed,\" said Boris Said. \"I thought I was going to cry, but I didn't. This was great clean racing and I'm happy to get this win for my team and owner Robby Benton.\"\n\"Robby and Bobby Benton have been a part of Robert Yates Racing and Roush Yates Engines for many years and I couldn't be more proud to be a part of their first win in the Nationwide Series,\" said Doug Yates, CEO of Roush Yates Engines. \"RAB Racing in an excellent organization and I look forward to celebrating many more wins with them.\"\nFrom asphalt to dirt, Roush Yates kept the winning streak alive with Don O'Neal going to Victory Lane in the Lucas Oil Late Model Dirt Series and Josh Richards giving Roush Yates' new 410 Ford Dirt Late Model Engine its first ever win.\nDon O'Neal won his second Lucas Oil Late Model Dirt Series event of the season on Saturday Night at Bluegrass Speedway. O'Neal started on the pole and led the entire race with his Roush Yates Dirt Late Model Engine. Fellow Roush Yates driver and current 2010 Lucas Oil Late Model Dirt Series points leader Scott Bloomquist finished 4th.\n\"We have always run well here, and tonight we brought a new car to win,\" said O'Neal. \"I want to thank my sponsors and Jay Dickens at Roush Yates Engines for giving me a great engine.\"\nJosh Richards gave Roush Yates' new 410 Ford Dirt Late Model Engines its first win during his first start of the season in the Hoosier Tire Mid-Atlantic DIRTcar Super Late Model series on Saturday night at Pittsburgh's PA Motor Speedway. This was the first race ran with the new Ford engine and engine builders at Roush Yates are excited to see immediate success.\n-source: roush yates engines", "label": "Yes"}
+{"text": "2013 1500 Research and Review\nWe take the time to write research and reviews on the Ram 1500, because we know your next 1500 purchase is important. We are a prominent Ram dealer in Dallas, and it's our mission to present you with Ram reviews composed by some of the most perfect automotive writers in the industry. Make knowledgeable decisions when it comes to your next auto purchase, don't take guesses! Each article is brimming with material and vehicle features in way that's easy to understand. Is the 2013 1500 right for your family? Continue reading and find out!\n360 Degree Ram 1500 Video\nIs the Ram Right for You?\nCompare the 2013 Ram 1500 alongside vehicles like the 2013 Ford F-150, Chevrolet Silverado 1500 and the GMC Sierra, and you'll catch that the 1500 outshines the competition in many areas. Catch a glimpse of our Quick List below to find out why!\n- 2013 Ram 1500 MSRP: $22,640\n- 2013 Ram 1500 Cargo Space: 125.3 cubic feet\n- 2013 Ram 1500 MPG: 14 city / 20 highway\n- 2013 Ram 1500 Body Style(s): Pickup Truck\n- 2013 Ram 1500 Colors: Copperhead Pearl, True Blue, Flame Red, etc...\n- 2013 Ram 1500 Seats: 3 passengers\n- 2013 Ram 1500 0-60 MPH in 8.2 seconds\nNew Features Available on the Ram 1500 in Dallas\nHelping You Uphold the Value & Quality of Your Investment\nGet a year warranty on repairs - plus access to legitimate Ram parts and fantastic Ram technicians - at your prominent Dallas area Ram repair center. Rams in Dallas can take a beating, so turn to the auto repair masters in Dallas - Richardson Chrysler Jeep Dodge Ram. We handle tough, trying services like engine repair, as well as effortless duties such as simple inspections, in-cabin air filter replacement and a diverse set of additional services. Make a commendable choice when picking a place to have your Ram 1500 repaired, and consider this: At Richardson Chrysler Jeep Dodge Ram you can rely on getting professional service and nominal prices on Dallas car repair. Save money on your next service appointment - click the link below to learn more.", "label": "Yes"}
+{"text": "Peugeot boast a comprehensive list of models to cater for most needs. From the funky little 108 city car, to a great supermini in the 208. The 308 and 508 are smart choices in the traditional family car market. In terms of the increasingly popular SUV market, all angles are covered from the compact 2008 to the mid-sized 3008, and the large seven-seater 5008. See below for all the latest text and video reviews of the Peugeot range.\nSeven-seater gives you key options.\nThe seven-seater SUV has three rows of seats and, of course, there is the innovative digital iCockpit\nPeugeot want to be an upmarket brand and lead the way in their segments on SUVs.\nThe 5008 is very much the modern Crossover/SUV", "label": "Yes"}
+{"text": "Interior Detailing Services Convenient For You From Auto Beauty Center\nInterior detailing services are an essential part of taking care of your vehicle. Unfortunately, most people’s schedules are busy, and getting their car in for some much needed maintenance is easy to forget. Luckily, Auto Beauty Center of Independence, Missouri offers a solution to this problem.\nOur interior detailing services are designed to clean and detail all automotive interior surfaces meticulously. To help maintain your vehicle’s value, we recommend that you have the interior detailed on a regular schedule. Our services are comprehensive, and the staff at Auto Beauty Center is experienced with exquisite and delicate surfaces. We offer a discount on our interior detailing services when paired with our exterior polish processes in order to bring you an unmatched value.\nWe know that our loyal customers are busy with their daily lives. That’s why we want to be able to provide the opportunity to make life easier for you. We offer pick up and delivery of your vehicle with our interior car detailing services. For a small fee, we will pick up your vehicle, professionally clean and detail it, and deliver it back to you. Sometimes we can even do this all in one day.\nWe offer a complete set of detailing packages developed in our over 30 years of experience taking care of our customers’ vehicles. These packages include exterior detailing services, the “MING” mirror finish paint protection, headlight restoration, paint spray removal, wrap removal/re-wrap vehicle, nanoize polish and protectant, and more. If you decide that you can fit bringing your car into us without making use of our pick up/delivery option, we offer a luxury lounge with wifi, coffee, and tea service.\nIf you need the services of an experienced professional detail shop for interior detailing services, you can trust Auto Beauty Center. Call us today for a quote at (816) 252-1978 or click here to learn how to contact us online.", "label": "Yes"}
+{"text": "Earned when a user has gotten 2 or more helpful votes\nAbout This Deal\nWhat’s included: digital wheel alignment and tracking service for four wheels, or a wheel balancing service\nValid for all non-commercial vehicles\nNew customers only. Excludes commercial vehicles. 24-hour cancellation policy. Excludes Sundays. Valid at Derby branch only. Valid Mon-Sat 9am-5pm. Limit 1 per person, may buy 1 additional as gift(s). Valid on option purchased only. Valid for 4 months.\nAbout Speedy's Wheels & Tyres Derby\nWith branches throughout the country, Speedy's Wheels & Tyres has quickly driven to the forefront of motoring maintenance. A wide range of solutions is available at each location, including alloy wheel refurbishment, fitting of tyres, MOT testing and mechanical services. The team also offer mobile tyre fitting for those who are too busy to make it into a garage.", "label": "Yes"}
+{"text": "2019 Yamaha WR250F •\nTHE BIKE FOR ALL TRAILS This bike has one ride on it. Lowered suspension and hand guards installed on it! Come view this hard to find bike!\nThe DNA of its YZ250F and FX brothers in a light, great handling trail machine for all around off-road riding.\nYamaha ATV Disclaimer\nATVs are recommended for those aged 16 years and older. YAMAHA recommends an approved training course. See your dealer or call\nYamaha SXS Disclaimer\nProfessional driver on closed course. Always protect the environment and wear your seat belt, helmet, eye protection and protective clothing. Read the owner’s manual and product warning labels before operation. Model shown with optional accessories. Vehicle specifications subject to change.\nYamaha Motorcycle Disclaimer\nProfessional rider(s) on closed area. Dress properly for your ride with a helmet, eye protection, and protective riding gear. Do not drink and ride. It is illegal and dangerous. Specifications are subject to change.", "label": "Yes"}
+{"text": "People Will Continue to Die in Accidents Until Truck Safety Is Required\nWith all the pyrotechnics of a Hollywood movie, last week in Nevada a semi-trailer skidded the length of a football field before driving through a crossing gate’s housing unit and into two double-decker cars on an Amtrak train.\nAccording to an Associated Press article, the truck driver and five other people died. The article doesn’t say how many people suffered serious personal injuries and whose lives – emotionally and financially – may be changed forever.\nThe article does say that the Nevada trucking company has been cited repeatedly by state authorities for crashes, unsafe driving, and vehicle maintenance violations, including operating a truck with tires so bald the truck had to be taken off the road immediately.\nAnd this was not the first time this company injured someone in a truck accident. A motor vehicle accident in February 2010 also resulted in an injured person.\nThe Commercial Motor Vehicle Advanced Safety Technology Tax Act of 2011was introduced to the United States Senate on June 20, 2011 and to the House of Representatives on May 4, 2011. It would provide owners of commercial trucks, buses, and commercial motor vehicle fleets with a tax credit for installing advanced safety technologies into their rigs.\nThese safety devices were identified by the Commercial Vehicle Safety Alliance as able to provide significant safety benefits. Though the federal government has been recommending for years that owners of trucks, big rigs, semi-trailers, tractor trailers, buses, and other commercial motor vehicles voluntarily install these devices, they are not required to do so.\nRecommended safety devices include:\n- Brake Stroke Monitoring Systems: relays critical information about air brake adjustment and operational status and can detect major brake problems in real time.\n- Lane Departure Warning Systems: in-vehicle electronic systems that monitor the position of a truck within a lane on a roadway and warns the driver if he moves out of the middle of the lane he is traveling in.\n- Collision Warning Systems: a radar-based system that mounted on the truck’s front bumper can reduce the opportunity for rear-end collisions. If a truck is getting too close to a motor vehicle or other object in front of it, there is an auditory or visual warning to the driver so he will slow down. If a collision is deemed imminent, the system automatically de-throttles the engine and applies the truck’s brakes. The system also includes an automatic cruise control component that supplements the truck’s normal cruise control by automatically attempting to maintain a safe following distance between the truck and the motor vehicle in front of it.\n- Vehicle Stability Systems: onboard sensors help to decrease rollovers due to excessive speed on a curve and loss of control situations due to instability.\nThe bottom line is that owners of commercial vehicles who put badly maintained trucks out on the road – such as the Nevada trucking company now under scrutiny for the fiery crash with an Amtrak train – will not spend the money to install these lifesaving devices into their trucks unless required to by law.\nThe Insurance Institute for Highway Safety said in an April 2010 study of these safety devices that they have “the potential to prevent or mitigate more than 1 of every 4 large truck crashes, 1 of every 3 injury crashes, and about 1 of 5 fatal crashes.”\nThis act, if passed, helps truck owners. That’s fine. Now, where is the law or regulation to force them to do it in order to save people’s lives?", "label": "Yes"}
+{"text": "C5 and C6 Show n Go Front License plate mount bracket. This does not fit C6 Z06 or Grand Sport use P#116655.\nThis Show n Go eliminates the standard OEMfront license plate mount that often looks like a design after thought, and replaces it with a mount that both displays the plate in a more attractive position, and allow the plate to be retracted and stowed out of site with a simple one hand motionfor off road show - no tools or adjustments are required. The transport mechanism incorporates a stainless steel torsion spring that both retains the mount in the stored position and also causes it to flip up into the display position when it is manually pulled out.\n*A simple one-hand motion to retract and stow the license plate or to pull it out and allow it to swing up into the display position\nThe Vehicle Fitment Guide is to be used as a general reference. The data has been provided by our suppliers and manufacturers and may contain errors or incorrect data. Always refer to a professional to verify correct fitment for your vehicle.\n||1997 - 2013", "label": "Yes"}
+{"text": "The transport minister urges the head of Tesla Motors India to build their cars in Indi for lowering the production cost.\n* Tesla Model 3 will be the first car from American EV maker\n* Model 3 Debut expected to be in Mid-2021\n* As per reports the car could be imported from China Plant\nRoad transport and Highway minister Mr. Nitin Gadkari in the recent conference has made a proposal to the Head of Tesla Motors, to do their whole production of electric vehicles in India, for lowering down production costs. It means Tesla to produce every product of the Vehicle domestically rather than just assembling them here. The union minister also offers incentives to the electric car maker in order to bring down the cost of production in India lower than the currently offered to American EV maker in China. In an Interview, Gadkari said, “Rather than assembling the car in India they should build the entire product in the country with the help of local Vendors. Then we can give out higher concessions”.\nHowever, Mr. Nitin Gadkari didn’t release any offers and incentive details. He also assured the EV giant that if they do a production of their cars in India, they will have the lowest production cost compared to the entire world. Tesla Inc. EV giant is all set to start its operations in India soon, and the company has already registered its office in Bangalore. The First model from tesla is their sedan Model 3, which will be launching in Mid-2021. As of now, the vehicle could be imported from the Tesla china plant, Gigafactory in shanghais through the CBU route initially.\nTesla Model 3 offered in three different powertrains namely as Standard plus, performance, and long-range. The Standard variant offers in rear-wheel-drive configuration along with a single electric motor. On the other hand, long-range and performance offers dual electric motor set up with All-wheel drive configuration. As per reports tesla Model 3 Standard plus variant will be introduced initially following by higher variants in the future. Pricing may start from Rs 60 lakhs (ex-showroom) onwards, however, the official price hasn’t revealed yet from the company.", "label": "Yes"}
+{"text": "Bracing for Impact: Readying Dealerships for an Electric Future\nElectric vehicles are beginning to change the automotive market as we know it. And while dealer profitability is seemingly at risk due to fewer service visits, the impact of waiting too long to embrace EVs will likely inhibit revenue growth and alienate customers in the long run. As the industry becomes more electric, dealers must adjust their view to capitalize on EV opportunities that continue to drive business.\nEVolution Part 1, Affinitiv’s latest white paper, is the first in a three-part series designed to help dealers gain a thorough understanding of the industry impact stemming from electric vehicles. Inside, we uncover the answers to these key questions:\n- What is the likely timing of EV changes?\n- What will be the economic impact on dealerships?\n- What should dealers do to prepare for the EVolution?\nComplete the form below to download your PDF of this Affinitiv white paper today.\nAll | November 10, 2021", "label": "Yes"}
+{"text": "With the announced closure of the Nissan Navara factory in Spain and the shift of VW Amarok production from Germany to South Africa, 2020 is set to witness the death of pickup truck production in Europe.\nThis is a hugely significant move as, despite pickup truck sales increasing across Europe, OEMs are increasingly reluctant to field them in their line-ups due to the huge penalties incurred for exceeding the average LCV CO2 emissions which we’ll come onto in a moment.\nWhere are our pickup trucks produced?\nFirst, we’ll have a quick look at where our pickup trucks are produced. Unlike panel vans, the vast majority are already manufactured outside of Europe:\nFord Ranger – Silverton, Gauteng, South Africa\nMitsubishi L200 – Laem Chabang, Chonburi, Thailand\nNissan Navara – Barcelona, Catalonia, Spain but moving to Rosslyn, Gauteng, South Africa from 2021.\nToyota Hilux – Prospecton, KwaZulu Natal, South Africa\nIsuzu D-Max – Phrapradaeng, Samut Prakan, Thailand\nVolkswagen Amarok – Hannover, Lower Saxony, Germany but moving to Silverton, Gauteng, South Africa (Ford factory) from 2022.\nSsangYong Musso – Pyeongtaek, Gyeonggi, South Korea\nWhy aren’t pickup trucks manufactured in Europe?\nTo answer this question, we have to briefly turn back the clocks.\nDepending on how you apply the term, ‘pickup truck’ production can be traced back to the Daimler one-tonner of 1896 but it wasn’t until the early 1950’s that pickup trucks became distinctive models with fixed body-coloured side panels that gave them that distinguishing, integrated appearance.\nThis trend was pioneered in the US and caught on this side of the Atlantic after the war with early examples including the Citroen 2CV pickup, Morris Minor pickup and Fiat Musone pickup. While they never replicated the success they had in the US, they were cheap and easy to construct as they were based on passenger car models.\nThe 1980s was a turning point for pickup trucks. While car-based pickup trucks like the VW Caddy (Yugoslavia), Peugeot 504 pickup (France) and Ford P100 (Portugal) were selling well, the bigger, dedicated 4×4 designs from Asia were starting to be launched.\nWhile some of these, like the Isuzu KB and Mitsubishi L200, were initially produced in Europe as well, economies of scale soon forced the production out of Europe. The notable exception was Nissan Barcelona, which started producing the Nissan Navara in 1998, Renault Alaskan in 2016 and Mercedes-Benz X-Class in 2017.\nFor a short while, this was Europe’s only pickup truck factory until Volkswagen launched the Amarok – its first pickup truck since the Taro – which it produced at its Hanover facility alongside the Transporter van.\nEnd of production\nIn February 2020, Volkswagen announced that it would cease producing the Amarok at Hannover by May and moving production to South Africa, then in May, Nissan revealed it would be closing its Barcelona factory, where it produces the Navara, Renault Alaskan and Mercedes-Benz X-Class, and also moving production to South Africa.\nThis is largely due to the fact that pickup truck sales in Europe, although rising, are much smaller than every other continent, other than Oceania.\nIn Barcelona, the Nissan factory produced just 53,000 vehicles in 2019 – just over 25% of its 200,000 capacity. With such a dangerously low number, Nissan will close the factory and move to a newly renovated factory in Roslyn, near Pretoria in South Africa.\nIn Hannover, Volkswagen manufactures the Transporter and Amarok in the same factory, although Amaroks made up just 30,000 of the 250,000 vehicles in 2019 and most of these were exported to outside the EU. VW is partnering with Ford for the next generation Amarok, and the American manufacturer will produce it alongside the Ranger in Silverton near Pretoria, freeing up capacity at Hannover for the Transporter.\nThe other reason is that the EU will be placing a restriction on manufacturers of 147g/km from September 2020 for the average Light Commercial Vehicle (LCV) range and the penalties are extortionate (€95 per g/km per vehicle over the limit). High emitting pickup up trucks count as LCVs and therefore raise the range’s average CO2 output significantly.\nThis has led to Mercedes-Benz dropping the X-Class completely and most other manufacturers are planning to restrict sales in this segment.", "label": "Yes"}
+{"text": "Closeout pricing on hundreds of quality Touratech items. Products are new and unused and feature huge discounts. Buy now, since supplies are limited. ITEMS UP TO 80% OFF!\nFinally after years of waiting, Garmin’s Zumo 350LM and Zumo 390LM GPS units have received the required firmware update to operate using tracks.\nThis video shows the how easy it is to use Touratech’s latest anti-theft device. This locking mount is designed exclusively for Garmin’s new Zumo 590LM GPS. It gives riders the confidence to momentarily leave their bikes unattended, provides a tenacious grip on the device and absorbs damaging vibration.\nWith the 2014 Touratech Rally right around the corner (June 26-29), we decided to put together this collection of Essential Accessories we think anyone attending this year's rally may want or need.\nThis step by step tutorial will show how to connect a Touratech locking mount onto your Harley Davidson, using the Harley Davidson Road Tech bar mount or Road Tech fairing mount kits. This article will also cover installation of the GPS power cradle into the Touratech locking mount.\nThe newest generation in the Garmin line of motorcycle-specific GPS units, the Zumo 590LM, incorporates many of the features we've grown to love in the Zumo series with a host of improvements. Touratech-USA has taken a look at this new navigation unit and came up with this list of 7 things you should know about the new Zumo 590LM.\nThe AZBDR is a 750-mile scenic ride across the state of Arizona, beginning at the Mexico border and finishing at the Utah border. The route consists of mostly remote dirt roads, that pass through iconic locations. Follow the link to learn more.\nNavigating with a GPS unit allows you to explore with confidence on your adventure motorcycle. The GPS experts at Touratech-USA have a few things they suggest you consider when selecting a GPS solution. Follow the link to learn more.\nThis past June, Touratech-USA hosted its fourth annual rally near the sleepy town of Plain, Washington. Like the three years prior, the 2013 Touratech Rally provided participants with an opportunity to ride a variety of roads and trails throughout Washington's beautiful backcountry, as well as learn more about adventure motorcycling.\nThis step by step tutorial shows how to easily wire a Garmin Montana GPS unit to your BMW R1200GS water boxer (2013-on) by removing the appropriate body panels, and running the wires to the battery for power. While the instructions picture a Garmin Montana GPS unit being installed, the methods can be applied to just about any GPS wiring kit.", "label": "Yes"}
+{"text": "EUROPEAN CAR EXPERTS\nSKODA CAR MECHANIC NEAR MULGRAVE\nSkoda is one of the oldest car manufacturing companies in the world and is one of the top-selling producers of European cars. With its superior technology, Skoda has developed a reputation for stability and ingenuity.\nOur Skoda mechanics know how you want your car to run. BCS Prestige mechanics have accumulated many decades of experience working with Skoda cars of all makes and models, including hatchbacks, the Kamiq SUV and diesel-engine vehicles.\nWe deliver logbook servicing that will not void your warranty. This is because we use only manufacturer-approved parts installed with our regularly maintained high-grade diagnostic equipment, carried out to Skoda’s specifications. Our exceptional service and standards of best practice ensure that your Skoda will receive the same care and attention as at a dealership but at a better price.\nIf you want Skoda service and repairs near Mulgrave and other suburbs in Melbourne’s southeast, call us today on (03) 9501 0010.\nIt’s our greatest aim to provide customer service that exceeds your expectations, so during your Skoda service, feel free to relax with a complimentary coffee, tea, TV and Wi-Fi in our comfy lounge area, or ask us about our complimentary courtesy cars and pick-up and drop-off service when you book in.\nTo book your Skoda service or repair, contact us on (03) 9501 0010. Our friendly staff will assist you through our simple booking process.\nSkoda Services and Repairs near Mulgrave\nIf you are looking for one of the best Skoda services or repairs near Mulgrave, Mount Waverley and beyond, check out BCS Prestige. As we are the few specialist European car service centres in Melbourne, we have great expertise working with all Skoda models.\nBook your Skoda for a comprehensive logbook service. We recommend this should take place every 10,000–15,000 kms or every 6 months (whichever comes first) so that your Skoda can run in prime condition. We check everything inside and out, from top to bottom, including:\nBattery check and replacement\nBrake service and repair\nHead gasket repair\nCome to BCS Prestige, Your Skoda Specialist near Mulgrave\nFor a truly satisfying customer experience, book in your Skoda for a superior BCS Prestige service. Our expertise and knowledge of Skoda designs, models and engine specifications are unbeatable. Keeping up-to-date with the latest Skoda information is a high priority so our work will give you unbeatable driving pleasure.\nWe will give you a written detailed quote during the service if we come across extra problems that need fixing, and we won’t fix them until you tell us to.\nExperienced European car mechanics\nOur specialist mechanics have accumulated decades of experience working on Skoda cars.\nOnly parts approved by Skoda are installed.\nNo surprise extra charges\nWe let you know immediately if there is something else that needs fixing before we go ahead.\nOur high quality services compare favourably to your local dealership.\nFree pick-up and drop-off service\nA free pick-up and drop-off service is available if you live within 10 kms.\nWHAT OUR CLIENTS SAY\nEUROPEAN CAR SERVICE EXPERTS\nContact Skoda Mechanic near Mulgrave\nBCS Prestige delivers expert Skoda services and repairs near Mulgrave and other Melbourne southeastern suburbs. Call us today on (03) 9501 0010.", "label": "Yes"}
+{"text": "Shopping for bank repossessed automobiles is a good alternative for anyone who is short of wheels. After an adjuster appraises a car that was concerned in an accident, insurance companies generally choose to pay the proprietor and take possession of the automobile, said Michael Madden, vp of real estate and growth for Insurance Auto Auctions. Insurance coverage Auto Auctions plans to refurbish the floor of the positioning, Madden said. Madden said the company remedied the state of affairs and added that Insurance Auto Auctions has strict environmental policies and insurance coverage. Resident Dan Matarese claimed that Insurance Auto Auctions subleased the parcel to a different operation for five years, which violated township code. Sarah Paris, Marlboro’s zoning officer, confirmed that her office has issued Insurance coverage Auto Auctions a notice of violation. Generally, they also prepare public sale of luxurious automobiles which improve the probabilities of getting an expensive automobile at very cheap price. Auto loans in Maine are easy.\nGo to the Lincoln Auto Auction website and Nebraska Auto Public sale website to register and find public sale dates and instances. Even if in case you have never attended a used car public sale before, you possible already know what one is. A used automobile public sale is when used autos are auctioned off in a public setting. A public used automotive public sale is one that is open to the general public. It’s an public helpful site sale the place just about anybody, together with you, can stroll into. On the subject of discovering a public used automotive public sale to attend, you should have various completely different options. This advertisement is commonly carried out in the weeks leading as much as a used automobile public sale.\nWhen you’ve got money amount on your automobile lying with you within the financial institution, and you’ve got an funding opportunity which may yield you 9% to 10% curiosity, then smart move would be investing your money and buying your car by way of auto financing. Before visiting your automobile vendor, figure out which automotive you have an additional reading interest in. Do some on-line analysis, ask buddies or family, compare prices, features and undergo all out there options before you zero-in on the automotive of your choice. Getting to the auction early is the easiest way to inspect autos and prepare for bidding. Penny auction is a singular means of purchasing item.\nThen full the File Corporation and LLC paperwork, which is a needed document to get your auction permission. You could get the LLC Paperwork online; proceed to the Florida Division of State Division of Corporation website and proceed with the given ways to join up online. You will also need to attend a dealership convention to get listed in Florida. To obtain an public sale license you’ll need on the very least sixteen hours of schooling at the seminar. There are completely different classes of auto auctions.\nBeneath are some steadily requested questions and answers that you will see that useful if you are concerned about shopping for a automobile at auction. A. Sellers can submit “profiles” to auction marketing departments, describing the sorts of automobiles they’re fascinated by purchasing. A. The dealer should try these guys out talk to the dealer representative, ringman or different auction official in the lane to facilitate a possible purchase. A. Auction certification is requested by the consignor and takes place earlier than the sale. On the lookout for the very best and skilled auto detailer will be very challenging and one must be eager and targeted in order that she or he can get the most effective auto detailing providers. The opposite process you need to use to identify the standard auto detailing company is by utilizing the website of the corporate. One of the excellent firms to choose is the Seattle auto detailing company. Nowadays, these are available on-line as well.\nAlternatively, there are some auction houses that solely select to host an public sale when they have sufficient used cars to auction off. If you’re enthusiastic about finding a public used automobile public sale that is held on a scheduled basis, you could possibly use a web based telephone book or a web-based business listing. In addition to utilizing a web based phone e-book or an online enterprise directory to search out data on an upcoming public used automobile auction, you can too use a typical web search. For example, if you’re a Chicago resident, you’ll doubtless not wish to travel to New York simply to attend a used automotive public sale.\nFor 2-and-a-half hours Thursday morning it went on. Representatives from 300 area automotive dealerships packed in round four drive-by means of public sale blocks at Supplier’s Auto Auction of Chattanooga, where navigate to this web-site used cars from dealerships, authorities entities and leasing outfits come to be offered at wholesale prices — and as-is, if you’ve include money.\nTheir Japan Auto Auction automobiles are maintained and tested by excessive-skilled engineers earlier than popping out on the market. Other than that, the leading auto vendor is the members of all massive Auto-Auctions in Japan. There isn’t a assure that a car will obtain a bid at an public sale.\nFor those who favor public sale then you must be the very best bidder at any of the High quality Assurance affiliate auctions. At current Quality Assurance does not have provision for on-line bidding due to this fact, all bids have to be submitted over the telephone, e-mail or you would message on the accessible message board upon getting registered online. As soon as the salvage automobiles public sale online has been accomplished it’s a must to organize for the payment. The auction company could require you to indicate a driver’s license. At first chances are discover more you’ll find the speed of the auction and the auctioneer’s chant confusing. For instance, if the public sale has a ten% purchaser’s premium and also you win something with a $ninety bid, your worth at test-out might be $99 plus tax. Verify the advantageous print of auction ads or flyers. There should also be signs on display at the public sale web site saying the client’s premium if there is one. About three years in the past I attended a daily month-to-month vintage public sale held at an auctioneer’s warehouse. Thus, the name of salvage auto auction.\nEast Idaho Auto Auction can also be the proper venue for automotive dealers to sell old stock, commerce-in automobiles, and to control dealership inventory. Identified for its small town, personalized service, East Idaho Auto Public sale gives auctioneering and lots of behind the scene providers in preparation for every car auction. It’s possible you’ll be required to shell out some registration costs for attending auto auctions. It should be remembered that the cost you give to your automotive is unavoidably larger than the fee you quote owing to the extra costs it’s a must to shell out at the auction.\nHitchcock has also served on the boards of two personal fairness-backed auction remarketing companies. When he sees a used automotive or truck he knows he can promote for a wholesome profit, the auto supplier from Villa Park, Illinois, jumps on it. Khan is considered one of a number of hundred auto sellers who spent a wet next day on the Manheim auto public sale in Matteson, Illinois, the place hundreds of used vehicles are bought and bought. That could embody the Mazda CX9 Khan purchased at the Manheim auction for $10,360. Extra information on the auction could be discovered right here.\nThe corporate performing the auction is still out to become profitable and will charge a charge to any seller whose automotive does not obtain a bid above the absolute low or a automobile that receives no bids in any respect. A recon car at a automotive public sale is one which has been reconditioned. Reconditioning means the car has obtained mechanical or cosmetic restore previous to the public sale to get it able to sell. Insurance coverage auto auctions are usually going to be vehicles which can web be thought-about a total loss, meaning that they’ve had collision injury, hail damage, flood, fire, vandalism or theft recovery injury that adds as much as greater than the automotive’s blue e book value. A hail damaged automobile can present an amazing deal for someone in search of a used automobile at an insurance coverage public sale. This is a dwell public sale and the best bidder wins.\nThe place to Go: There are numerous automotive auction sites, however some are better than others. While you go to an auction the cars you find will come from a variety of locations, which is why you may find some really good ones and possibly some really unhealthy ones. Keep in mind there might be a number of autos at the auction but you want have the type of selection you’d get at a dealership so ensure you have two or three varieties in thoughts. As you already know, most of the gadgets which might be being featured in a Kansas City auto auction are very inexpensive.\nDo as a lot analysis forward of time on the kind of automobiles you are involved in. Armed with this info and the public what is it worth sale you wish to go to, it times to get began. In the event you determine to look online, you possibly can both do your own search or use an internet auction listing service (for a one-time charge).\nImpound insurance auto auctions on the market is mostly frequent in automobile auctions performed by way of the federal and state regulation enforcement businesses. The viewing at an public sale usually lasts with an hour and begins at 9am, immediately after this the gross sales will start. These pre owned insurance auto auctions range in kind because the oldsters who after owned them even have various style. Auto public sale as the see post identify suggest is a pattern of promoting new as well as the pre-owned automobiles by the auction system. This is the only reason why auction techniques in the core of countries like UNITED STATES OF AMERICA and JAPAN are always chosen by the individuals. Moreover the auto auction system prevents you from being hanged up with salvage cars that in each case have miserable situation.\nOnce I bought my hardwood flooring at auction (paid ~ 10% of retail), I went to an public sale that was held in farming nation in the middle of harvest. I’m evaluating whether to got into buying automobiles at auction and reselling them. Our auction home additionally lets you pre-bid online, so you can see if there is early interest on some of your needed autos.\nVerify the website for the public sale once you find it. The website gives you detailed details about where the auction shall be held, how early it’s best to arrive, what you must carry and what objects can be auctioned off. This means you possibly can usually view the automobiles that shall be auctioned off earlier than the day of the auction. The one thing with going to an public sale is that you will have to have the money from this source already with you to pay for the car and you may not get the offers that would be obtainable to you the dealers however still would have saved money with the purchase. This will all work out in your profit if you find the public sale and plan the whole lot ahead of time. The Government seized public sale of automobiles market has quite a few automobile models and makes. You may take into account buying this luxurious SUV via an internet car public sale for used automobiles.\nThe expertise of buying a car from an auction web site could be extraordinarily pleasurable due to the fun of exploring and bidding your favourite car model. That is where the seizure and surplus regulation kicks in, meaning that these cars could be legally offered off at auction. Now and again, you possibly can even choose up an auto as much as 90% off its original worth. All you must do is discover a good online auction site. After you have sorted out the auto to go for, why not make a remark of the location as most also provide auctions for vans, trucks, grime bikes & even buses & aircraft as nicely! Auto auctions often deal with off-lease, off-rental, company vehicles, or repossessed autos. Government auto auctions are held all across the country in practically every metropolis. Buying at public sale will be a good way to buy a top quality used automobile. A. Most auction chains have in-house financing departments that can assist impartial sellers arrange for credit.", "label": "Yes"}
+{"text": "No. Here, the manufacturers are expressly clear by saying that all their Toyota Tundra models produced from the year 2000 to 2020 cannot be flat towed safely.\nContinuous lubrication is very important especially since the wheels of any towed car are rolling on the road throughout the towing period. Anything different from this can lead to damage to very important vehicle components.\nAll in all, it has been made very clear that the only way you can flat-tow the Toyota Tundra is by either removing its driveshaft or getting the driveshaft disconnect installed.\nIn this way, you have successfully removed any factor that could potentially lead to the damage of vital car parts during towing, making successful towing both possible and easy too.\nIn towing this vehicle, it may be necessary to keep the steering wheel unlocked by hooking up a Remote Battery Disconnect # RM-766. All you got to do is to turn on the ignition without necessarily pushing the brake pedal.\nThe moment the steering wheel is unlocked, you should push the disconnect button which will turn off all power to the vehicle.\nHowever, if you happen to be using a Blue Ox towing system, you may have to use the base plate # BX3794, but not before you ascertain whether your tow bars are rated for the weight of the truck.\nIn this case, the Blue Ox Ascent #X4375, which has the lowest weight rating, should be recommended.\nIn summary, the Toyota Tundra cannot be flat towed, and doing so could lead to the damage of your transmission system due to a lack of sufficient fabrication.\nThis is particularly the case for models of the car produced in the last twenty or so years from 2020.\nHowever, there are still procedures you can adopt to enable you flat-tow the vehicle without any harm, but it is important to know the procedure very well before embarking on it. Otherwise, it may lead to more damage too.\nHow do I flat tow a Toyota Tundra?\nThe manufacturers have made it abundantly clear that you must not flat tow a Toyota Tundra to avoid damage to its transmission system. However, it is common for people to adopt certain strategies or modifications that will enable them to flat-tow the vehicle safely.\nCommonly, if you want to flat-tow the vehicle, you can either remove the driveshaft or get a drive shaft disconnect installed in the vehicle. Alternatively, you can tow the vehicle from one point to another using a tow truck or trailer. Using any of these procedures will enable you to successfully tow the vehicle without any complaints.\nAgain, it will be good to know that for front-wheel-drive cars with automatic transmission mechanisms, it is very safe to flat-tow them with the aid of a tow dolly which will raise the front tires off the road throughout the period. This will effectively guard against any transmission system damage.\nWhat towing equipment can I use to flat-tow a Toyota Tundra 4 × 4?\nAlthough it is not recommended for you to flat tow this vehicle according to the manufacturers, it is still possible to do so if you deactivate the drive shaft by either removing it entirely or by getting the driveshaft disconnect mechanism installed.\nTherefore, one of the first pieces of equipment you will need to flat-tow the vehicle is a good driveshaft disconnect mechanism, such as the Remco Drive Shaft Disconnect.\nIn addition to this, you will also need base plates like the Blue Ox Base Plate Kit with removable arms, which is easier to install than most others.\nA good tow bar is another bit of equipment that will also come in handy when flat towing a Toyota Tundra. In this case, the Blue Ox Avail Tow Bar, which will not require any adapters before you can connect it to the base plates and has a capacity of about 10, 000 lbs, will do just fine.\nAnd for the tow bar wiring, you can use the Roadmaster Flexo-coil Wiring with diodes to prevent electrical feedback and possible damage to the components of the vehicle.\nShould you want the brake lights and turn signals of the truck to function separately, you can also include a wiring converter and possibly two diodes if you want to retain separate turn and brake signals as well.\nFor any supplemental brake, which is mandated by law in many places, you can use the Blue Ox Patriot 3 Radio Frequency, a very portable braking system that can be used in many other vehicles too. It provides 3 proportional braking systems that would not wear down the brake of the vehicle and has superior stopping power.\nIs it safe to flat-tow a Toyota Tundra 4 × 4?\nYes, it can be safe to flat-tow a Toyota Tundra 4 × 4 even though the user manual warns against it, but you will have to take very strict counter-measures that will protect the drive shaft of the vehicle. The turning of the drive shaft while towing is what causes damage to the transmission system of the vehicle.\nTherefore, if you either remove or deactivate it, it becomes safe to flat-tow the vehicle despite the warning of the manufacturers. To make it a lot safer, you should drive only within the recommended towing speeds as well as not for distances farther than that speed which is advised for safe flat towing.\nCan you flat tow a Toyota Tundra with a tow dolly?\nFor the umpteenth time, it is not recommended for you to flat a Toyota Tundra, however, that is only possible if you take all the necessary measures that will protect the transmission system of the vehicle. As for whether you can tow it using a tow dolly, it will certainly depend on the features of the car.\nFor instance, if your Toyota Tundra is a front-wheel-drive model, then, you can flat-tow it with a tow dolly that has the requisite capacity.\nAnother alternative for towing Toyota Tundra safely using a tow dolly is when you either deactivate its driveshaft or get the drive shaft disconnect mechanism installed. All in all, unless you take these measures, it will not be possible to tow the Toyota Tundra with a tow dolly safely.\nCan Toyota Tundra be flat towed behind an RV?\nYes, Toyota Tundra can be safely flat towed behind an RV if you have taken measures to safeguard its driveshaft and transmission mechanism. This is possible by either neutralizing the driveshaft or getting it removed entirely too. Unless you do this, it will not be possible to tow the car with an RV safely.\nFrequently asked questions(FAQ)\nCan you flat tow a Toyota truck?\nCars and trucks are flat towable or not based on their characteristic features. To be more specific, you can flat tow vehicles with automatic transmissions when they are front-wheel-drive models or when you remove their drive shafts completely during the period of the tow.\nConsequently, if your Toyota truck is a front-wheel-drive type or if you have successfully removed or deactivated its drive shaft, then you can flat tow it safely whether all by itself behind a tow vehicle or by using a tow dolly. But if you have not done any of these, you shouldn’t contemplate flat towing it.\nTo be sure of where you stand in this matter, you are advised to refer to the user manual.\nCan a 2016 Toyota Tundra be flat towed?\nThe manufacturers have strictly warned that all Toyota Tundra cars produced between the years 2000 to 2020 should not be flat towed entirely. However, with some modifications or the aid of certain bits of equipment, some of these cars can be flat towed and safely too.\nTherefore, regardless of whether your Toyota is a front-wheel drive or a 4 wheeler, you can flat-tow it if you either install the drive shaft disconnect override or you remove it entirely during the entire period of the tow.\nDespite this possibility, it is best if you refrain from flat towing it entirely except by the use of a flatbed tow trailer or truck. In all these cases, you are strongly advised to refer to the user manual before you do anything just to ensure that nothing gets damaged in the process.\nConclusion – Can You Flat Tow A Toyota Tundra 4× 4?\nGenerally, it is highly recommended to strictly adhere to all the recommendations of the manufacturers as stated in the user manual before you do anything.\nTherefore, you are advised to do only that which is allowed. Regardless of this advice, there are certain counter or preventive measures you can take that will effectively make your vehicle safely flat towable against all odds or advice. Damage occurs when cars are flat towed due to a lack of lubrication in the transmission systems.\nConversely, if you either remove the driveshaft from operation or install a drive shaft override mechanism, you would have essentially safeguarded your car from any damage thereof.\nWhere you are not sure about anything, you should please tow your vehicle with the aid of a flatbed tow truck which will not allow the wheels of the car on the ground, a procedure that will prevent damage to its transmission. After all, to be forewarned is to be forearmed, or so the legend goes.", "label": "Yes"}
+{"text": "Baron & Budd Attorney and Shareholder Burton LeBlanc to Speak on Opioid Epidemic at American Association for Justice\nBATON ROUGE, La. – November 17, 2017 – The national law firm of Baron & Budd is pleased to...READ MORE\nDefect Can Result in Severe Engine Damage that Can Cost Thousands of Dollars to Fix\nLOS ANGELES (May 24, 2016) – Baron & Budd is investigating a potential class action lawsuit against Volkswagen (VW) and Audi involving alleged timing chain defects that can lead to thousands of dollars in engine damage. A similar case has been filed in the U.S. District Court, District of New Jersey (In Re: Case No. 2:16cv02765)\nIn the suit, the plaintiff is alleging that VW and Audi knowingly concealed a defect in the timing chain tensioning system of certain models manufactured between the years 2008 and 2013 with 2.0L engines. The plaintiff alleges that the tensioning system can fail at any time, resulting in severe engine damage that can necessitate either repair or replacement of a damaged part – or potentially the entire engine.\nIn addition, the plaintiff alleges that the defect is a substantial safety hazard. If the timing chain fails, the affected vehicle can lose engine power. This can lead to several hazardous problems, such as the ability of the vehicle to accelerate, a loss of steering control and an inability to use the brakes. According to the complaint, the drivers of the affected vehicles, as well as their passengers, are at a risk for rear-end collisions and other accidents.\nThe plaintiff alleges that VW and Audi knew of the defect, yet failed to disclose the problem and the corresponding safety risks.\n“These alleged actions on the part of VW and Audi are not only extremely deceptive, but can also put drivers and their passengers at a substantial risk of injury or death,” said Roland Tellis, head of the Consumer Class Action group at the national law firm of Baron & Budd. “No car buyer should be expected to have to deal with this type of serious defect, much less be expected to pay thousands of dollars should that defect lead to potentially catastrophic engine damage.”\nThe law firm of Baron & Budd, P.C., with offices in Dallas, Baton Rouge, New Orleans, Austin and Los Angeles, is a nationally recognized law firm with a nearly 40-year history of “Protecting What’s Right” for people, communities and businesses harmed by negligence. Baron & Budd’s size and resources enable the firm to take on large and complex cases. The firm represents individuals and government and business entities in areas as diverse as dangerous pharmaceuticals and medical devices, environmental contamination, the Gulf oil spill, financial fraud, overtime violations, deceptive advertising, automotive defects, trucking accidents, nursing home abuse, and asbestos-related illnesses such as mesothelioma.", "label": "Yes"}
+{"text": "Skip to code content (skip section selection)\n(A) No vehicle shall be loaded with materials likely to create loud noises by striking together, without using every reasonable effort to deaden the noise.\n(B) (1) The use in, upon or attached to any motor vehicle operating on any street of the town of any radio, phonograph, musical instrument, bell, whistle, loudspeaker, amplifier or device of any kind whatsoever, whereby sound therefrom is cast upon any street to promote or advertise the sale of goods, wares or merchandise, or for the purpose of advertising auction sales, sporting events or other business or things advertised thereby, or for purposes of entertainment or any other purpose, with a sound level greater than the level allowed by law, is prohibited, except in accordance with a permit issued by the Mayor.\n(2) The provisions of this division shall not apply to motor vehicles driven in a duly authorized parade; and provided further, that the use of a loudspeaker on a motor vehicle for making auction sales in streets directly in front of the property then being sold, and entirely outside of the business districts of the town, shall not be construed as a violation of this division when the use is limited strictly to the selling at auction of the property.\n(C) It shall be unlawful for any person operating a motorcycle within the town to create in its operation any unreasonably loud or disturbing noise.\n(D) In operating a motorcycle, the following acts among others, are declared to create loud and disturbing noises in violation of this section, but the enumeration shall not be deemed to be exclusive, namely:\n(1) The use of a motorcycle so out of repair as to cause loud grating, grinding, rattling or any of these noises, or any other noise;\n(2) The practice of racing the motor of a motorcycle while standing or moving, causing noise from the motor;\n(3) The practice of retarding the spark to the motor causing loud and explosive noise from the motor;\n(4) In starting a motorcycle off from a starting position, the practice of gaining speed quickly, causing loud noise from the motor; and\n(5) The practice of coming to an unreasonably quick stop with a motorcycle causing grinding of brakes and screeching of tires or either of these noises.\n(1997 Code, § 66-9) Penalty, see § 71.99", "label": "Yes"}
+{"text": "FAW J5K 4X2 4x4 10 ton Mining Dump Truck for Sale. Diesel Powered. 4x2 Wheel. 4x4 Wheel. $17000.00 - $20000.00 / Unit. 1 Unit (Min. Order) Brand New Sinotruk Howo 25 Tons 6x4 Dump Truck 371HP 10 wheeler Tipper Truck 6 by 4 Dumper. Diesel Powered. 6x4 Wheel. $ China Second Hand Styer 6x4 Dump Tipper Truck Used Truck For Sale. 6x4 Wheel\nSecond-Hand FAW 6 4 Tipper Truck Heavy Duty Dump Truck. Second-Hand FAW 6 4 Tipper Truck Heavy Duty Dump Truck. Dump Truck Dumper Truck Tipper Vehicle manufacturer / supplier in China offering Faw 6*4 Tipper Truck Heavy Duty Dump Truck 10cbm Road Cleaning Truck 12cbm Road Sweeper Truck Mini Foton 4*2 2 Cbm 3 Cbm 5 Cbm Sewage Suction Truck …\nSecond-hand Foton Dump sand Dump Dump truck Second-hand FOTON Aumark Dump truck 8Ton Dump mini … FOTON Aumark TX pequeño 4*2 camión ligero 2,5 toneladas de gasolina/diesel del motor de camiones de carga de camión de Howo camión ligero HOMAN Yuchai Euro 3 130hp 4x2 11cbm Mini Dumper. $9,000.00-$20,000.00 / Unidad. 1 Unidad …\nSinotruk HOWO 6X4 371HP 375HP 420HP used and new Dump Truck/Tipper Truck Our main products include full series products of CNHTC(HOWOSTRGolden Princeetc.)buses trailers including dump truck tractor truck concrete mier truck sprinkler truckwater/Oil tank truck truck mounted crane concrete pump truck.etc low bed semi-trailerflatbed semi-trailer\nRelated Information for Camion Benne Basculante Sinotruk HOWO 6X4 10 Roues 371 HP. Second-Hand Beiben Tipper Truck 8X4 420HP Camion China 12 Wheels Dump Trucks; Congo Camion 6 4 380HP Beiben Tractor Truck; Second-Hand 4X2 HOWO Truck Price Mini Dump Truck Camion 6t Tipper Truck for Sale\nFaw 5 ton mini tipper truck 120hp - qdfaw.cc. FAW 6×4 25Ton Dump Truck 340hp 4×2 Hot sale sewa dump truck 120hp 380hp 8×4 FAW dump truck with best price Inquiry If you have any suggestions or opinions about our products please leave a message and we will immediately answer your questions.\nChina Jushixin Sino 6X4 Type 30-40 Ton Used Dump Trucks . Cheap Heavy Duty Used/New Sino Sinotruk HOWO 371/375HP 6X4 Euro2 10wheels/Tyres Sand Lorry Cargo Dumper Tipper Quarry Dump Truck Used Trucks for Africa Market US $8,600-16,800 / Piece Jushixin High Quality 20 Cubic Yards 15m3 Foton Shacman HOWO Sinotruk Brand New/Used Trucks Dumper Mining …\nSecond-Hand HOWO 30t Dump Truck Tipper Dumper Truck of . HOWO 6*4 30ton Tipper Truck Used Dump Truck for Sale. Dump Truck Tipper Truck 30ton Tipper Truck manufacturer / supplier in China offering HOWO 6*4 30ton Tipper Truck Used Dump Truck for Sale 2.5mt 5mt 10mt 20mt LPG Station 5cbm 10cbm 20cbm 40cbm LPG Storage Tank Station with LPG Dispenser High …\nChina Faw Dump Truck manufacturers - Select 2021 high quality Faw Dump Truck products in best price from certified Chinese Truck, Heavy Duty Truck suppliers, wholesalers and factory on Made-in-China.com\nLight Truck HOWO Light Truck Light Cargo Truck manufacturer / supplier in China offering HOWO 3ton Light Cargo Truck with 7.25r16 Tubeless Tyres 4*2 Dump Truck Price China Sinotruk HOWO Factory New Modal 6 Wheeler Used Dump Truck Head Tractor for Sale 6X4 8X4 4X2 Sino HOWO Truck Price New Tipper Tipping Dumper Truck Used Dump Trucks and so on.\nOriginal Beiben North Benz Second Hand Dumper Truck 20. China Sinotruk HOWO 6X4 Dump/Tipper Truck for Low Price . Heavy Duty Second Hand Used 371HP HOWO Tipper Used 6*4 Dump Truck in Dubai US $15,000-18,000 / Piece China Original HOWO 12 Wheeler 371HP 375HP 8X4 Tipper/ Dump Truck 40 Ton 50 Ton New or Used Heavy Truck.\n300hp dump truck 300hp dump truck Suppliers and A wide variety of 300hp dump truck options are available to you such as 6x4 8x4 and 4x2. You can also choose from 351 - 450hp 251 - 350hp and 150 - 250hp 300hp dump truck as well as from > 8l 6 - 8l and 4l 300hp dump truck and whether 300hp dump truck is 21 - 30t 31 - 40t or 41 - 50t.\nSecond-Hand Shacman Dump Truck 6X4 290HP 25 Ton Tipper Truck. Talenet used trucks to provide you with a good source of trust including used tractors used trucks used dump trucks and so on. The vehicle source of the platform is real the vehicle condition is transparent and you can choose at ease. You can buy and sell second-hand trucks . Get a Quote\nKefid · Used China Shacman F3000 8 4 375HP Tipper Truck. Talenet Second-hand car to provide you with a good source of trust including tractors trucks dumps and other second-hand truck sources platform source of real cars transparent car conditions trust to choose buying and selling second-hand trucks on the Talenetservice hotline:0086-371-60922096. Get\nUsed Dongfeng 10-15 Ton 190HP Tipper Truck Mercedes . Second-hand 8x4 Dump Truck. Used 6x4 Dump Truck 4 cbm concrete mixer truck Dongfeng cabin left hand drive and right hand drive are optional 4-cylinder turbodiesel engine of 140 hp and 500 n.M 6-speed manual transmission with 1 reverse gear 10 ton rear driving axle 8.25-20 tyre with one spare 4 cbm mixer body with …\nChangan 1 5 Ton Lorry Commercial Truck Diesel Double Cab Truck ; Second-Hand Shacman 8X4 25t 30t Mining Dump-Truck Dump Body Truck; Second-Hand China Supplier High Standard Sinotruk HOWO Dump Truck 6X4 Price; Second-Hand Hot Sale FAW 5 Ton 4X2 Light Truck; Second-Hand China Special Truck All Wheel Drive Cargo Truck 4X4\nSinotruck Used Truck Second Hand Truck Used 6*4 Tipper Used Dump Truck Heavy Truck Used Tipper Used 6*4 Truck. Brand: SINOTRUK HOWO Driving type: 6X4 Cab: HW76, 2 seats, with A/C Engine: 371hp Transmission: HW19710, 10 forward and 2 reverse Front axle: HF9 Driving axle: HC16 Tire: 12.00R20 Lifting system: Front lifting Model Year: From 2009 to 2014", "label": "Yes"}
+{"text": "tractor cab windows cab windows homemade tractor cab windows.\nvintage red truck decor cute little metal red truck vintage red truck tree decor handcrafted vintage red metal truck wall decor.\nbest food truck ideas food truck ideas toronto.\ntractor side window wiper series features windshield wiper equipment.\ntruck rear window decals decals for back window of truck bugling elk full rear window decal see through.\npower divider truck power divider with external lube pump.\nfence post driver for tractor the model post sitting in the free standing position ready to go back.\ntruck tool box organizer ideas truck tool box organization ideas ion toolbox organizer wooden best on wood shop pickup truck tool box organization ideas decorating styles names.\nnissan 4 door truck for sale 40 4 ton truck 2007 nissan 4 door truck for sale.\nhow to replace driver side window chevy truck crew cab.", "label": "Yes"}
+{"text": "The 2018 Ford Escape and Honda CR-V are two small crossovers with massive family-style appeal. But which is right for your unique lifestyle? Before you hit the dealership, consult our comparison guide. We'll help you come to the best conclusion.\nMost Passenger Comfort: 2018 Ford Escape\nThe Escape is the smart choice for families on the move. Seating is supportive, offering a comfortable road trip in both rows. This small crossover is also big on cargo space. Flip down the rear seats to create 68 cubic feet of maximum cargo space - plenty of room for a team-size supply of sporting goods or your latest IKEA haul.\nLike the Escape, the Honda CR-V is a five-passenger crossover. Tall passengers will be comfortable in both the front and rear rows, thanks to the CR-V's spacious cabin. It might not be quite as refined as the Escape, but the CR-V is big on practicality, with clever compartments throughout the cabin for passengers' personal effects.\nFriendliest Infotainment Lineup: 2018 Ford Escape\nFord's infotainment system, Sync 3, is optional on the mid-level SE trim and standard on the upscale SEL and Titanium models. We're big fans of the system, which includes both a responsive 8-inch touchscreen and easy-to-remember voice controls. It's easy to sort through your options, even if you'd rather not take your eyes off the road.\nBoth the Escape and the Honda CR-V infotainment systems include Apple CarPlay and Android Auto smartphone integration to display important apps on the cabin's central touchscreen. Honda's infotainment system has a few drawbacks. Its voice control system isn't always as responsive as we'd like it to be, for example. The touchscreen menus could also be a little more intuitive. However, if you stick to the Apple CarPlay and Android Auto controls, you don't have to worry about these issues. Just plug your phone into the system and go.\nBest Safety Lineup: 2018 Ford Escape\nThe 2018 Ford Escape has your back in times of need. Its driver safety aids were specially designed to alert you to danger so you can react accordingly. Some systems, like the automatic braking function, even intervene on your behalf to help keep you and your loved ones secure. This crossover also offers blind-spot monitoring and adaptive cruise control for further peace of mind.\nAll but the base CR-V trim model come standard with a long list of safety features. These include forward collision warning with automatic braking, a system with lifesaving potential. However, Honda's safety systems can be a little quick on the draw, attempting to keep you from danger that isn't really there.\nThriftiest Ride to Work: 2018 Honda CR-V\nThe CR-V will help you save the most on fuel costs, making it a great option for carpoolers. Depending on equipment, this thrifty crossover achieves 28 city/34 highway mpg. Back in the 2018 Ford Escape, you can earn up to 23/30 mpg.\nYou should note, however, that the Escape's extra power is better suited to towing. The 2018 Ford Escape can tow max loads of 2,000 pounds, whereas the CR-V maxes out at 1,500 pounds. The Escape may be the better choice if you've got more than one Jet Ski to lug around.\nThese small crossovers are both nicely suited to city life, with smaller exterior dimensions and generous passenger accommodations. Both balance sporty performance with modern fuel economy. However, we think that the Ford Escape is the better choice for tech-savvy drivers and families who crave comfort. This crossover also does a great job keeping you safe, with options that include forward collision warning and mitigation technology.", "label": "Yes"}
+{"text": "Hi All, I have been following teamfiat ever since I decided to go for a fiat car. That was back in 2010. I waited for Linea TJet to launch for 6 months and booked it as soon as it was launched. The SA (Prerana Motors) told me that mine was the second TJet in Bangalore. I have been enjoying this car ever since. Driven 25k. When I brought it I had plan to change it after the company lease is over but I don't plan to change it now (and maybe for a long long time). This car is so addictive. I have been to many places in and around karnataka and the way this car drives and sticks on to the road is amazing. Here are some photos. Sorry for low quality images; they were taken from my mobile.", "label": "Yes"}
+{"text": "Points Leader Line Leads the Way in Pro Stock Qualifying at Seattle Pontiac GTO Driver Claims Fourth No. 1 Qualifier of the Season KENT, Wash., July 22, 2006 - It looks like Jason Line, driver of the Summit Racing Pontiac GTO, is wasting little...\nPoints Leader Line Leads the Way in Pro Stock Qualifying at Seattle\nPontiac GTO Driver Claims Fourth No. 1 Qualifier of the Season\nKENT, Wash., July 22, 2006 - It looks like Jason Line, driver of the Summit Racing Pontiac GTO, is wasting little time settling in to his new position atop the NHRA POWERade Pro Stock points standings. One week after unseating teammate Greg Anderson for the top spot in the Pro Stock standings, Line went out and claimed the No. 1 qualifier for Pro Stock eliminations at this weekend's 19th annual Schuck's Auto Supply NHRA Nationals at Pacific Raceways. Line claimed his fourth No. 1 qualifier of the season with an elapsed time of 6.690 seconds and 206.80 mph, edging out last year's winner here at Seattle, Kurt Johnson, in his ACDelco Chevy Cobalt. Johnson qualified second with an elapsed time of 6.696 seconds at 206.07 seconds.\n\"That felt really good in the car and I guess the scoreboard agreed,\" said Line after Friday night's qualifying run. \"It was pretty stout. I'd say we got all of it out of that run. I'm really happy with the way the car's running right now.\n\"I really thought that one of us, Greg (Anderson) or me, would run better than the .69 I ran last night, but nobody did. What can I say? I thought either Greg or I would do better, and Kurt Johnson came close with his pass this morning. We hurt the engine in this morning's session, otherwise I though we would have gone faster. We damaged something internally, but we haven't taken it apart yet. So we changed engines and the new one seems to be as good as the one we hurt. I still believe we have one of the best, if not the best, cars out here. I'd rather be in our position than everybody else's.\"\nLine will face Max Naylor in the first round of Sunday's eliminations. Other Pontiac qualifiers joining him in the 16-car field are teammate Greg Anderson in fourth, Tom Martino (5th), Greg Stanfield (6th), Jim Yates (9th), Warren Johnson 10th), and Mike Edwards (14th).\nChevy qualifiers joining defending event champ Kurt Johnson include last week's winner at Denver, Dave Connolly, in seventh, Tom Lee in the Slammers Chevy Cobalt in 12th, and Ron Krisher in 13th.\nIn Funny Car, Phil Burkart Jr. led the way for Team Chevy, qualifying fifth with an elapsed time of 4.898 seconds at 316.75 mph. Robert Hight is qualified No. 1 in a Ford. Other Chevy drivers joining Johnson for Sunday's elimination rounds are Cruz and Toony Pedregon in seventh and eighth, respectively, Tommy Johnson Jr. in ninth, Gary Densham (10th), Tony Bartone (13th), Del Worsham (14th), Scott Kalitta (15th) and Tim Wilkerson (16th).", "label": "Yes"}
+{"text": "View all sponsored results\nSpecial Offerfrom Ken Garff Ford\nAll New 2014 Ford F150 XLT\nCamaro ZL1, GM Certified, and 6.2L V8 Supercharged. Are you READY for a Chevrolet?! Call ASAP! Are you looking for an used vehicle that is i...\n3 miles from 84114 Jerry Seiner Salt Lake1-888-993-2934\n$ave Thousands Over New! 1 Owner, Accident Free LOADED Yukon XL has Heated & Cooled Leather Seating w/Memory, Navigation System w/CD...\n15 miles from 84114 Jerry Seiner Buick GMC Kia1-888-836-0986\nYou have already selected three cars.\nRange of prices within this search:\n- Highest Price:$159,981\n- Lowest Price:$11,587\n- Average Price:$26,497", "label": "Yes"}
+{"text": "So I'm having typical wierd issues and wanted to see folks opinion. The rear bags always hold air, the fronts can hold all night and when I start the car it lets down and may not fill right away. If I move the car or bounce it while the compressor is running they will come back up. I've seen the front way overfill before. What are your thoughts?", "label": "Yes"}
+{"text": "PremiAir Racing, which was only bought from Team Sydney last month, has been given an extra week to prepare.\nRed Bull Ampol Racing, Shell V-Power Racing Team and Matt Stone Racing will test in Ipswich on February 16.\nVictorian main game teams will test at Winton Motor Raceway on February 22.\nThe Gen3 prototypes will be tested at Winton on February 22 and 23, with the second day also featuring Super2 testing.\nPremiAir Racing, now owned by drag racing veteran Peter Xiberras, will enter 2022 with a new line-up and new look.\nChris Pither has replaced Fabian Coulthard, with Garry Jacobson staying on.\nThe team has also vowed to replace the fluorescent yellow colour scheme, with new liveries to adorn both cars.\nXiberras previously confirmed PremiAir Racing will be based out of Queensland.\nThe team will continue to run two ZB Commodores before the Gen3 ruleset arrives in 2023.\nXiberras recently sent the cars to Triple Eight Race Engineering to undergo significant work.\nJacobson testing at Queensland Raceway last February\n\"We discussed it as a team and due to all of the work that is needed to be done to the cars, we wanted to give the crew the best opportunity to have everything up to date and completed properly from our end,\" Xiberras said of his team's new test date.\n\"Wednesday the 23rd was a better option for the team. Especially regarding the assistance we will receive from our technical support partnership with Triple Eight.\n\"This will allow some of their senior staff to oversee our first day in the car.\n\"Supercars have been fantastic. Setting up a team in six weeks has been an enormous task.\n\"Supercars have helped us out along the way allowing us to test a week later, outside of the other QLD teams.\"\nPremiAir Racing will make its racing debut at Sydney Motorsport Park in March.\nCLICK HERE to purchase your Beaurepaires Sydney SuperNight tickets.", "label": "Yes"}
+{"text": "Exact repro Deluxe bumper trim. We are the only company world wide to produce these impossible to find bumper trims. Made from our own extrusion dies and then formed exactly as the VW items, these Aluminium bumper trims will make the finishing touch to your deluxe bus. Supplied polished with stainless steel fixing hardware & black rubber insert. (Also avaliable individually\n- Set of 2 expertly made aluminium bumper trims.\n- Rubber infill (requires slight trimming)\n- Bolt Kit\n- Fitting instructions", "label": "Yes"}
+{"text": "September 2016Tamiya 1:24 2016 Honda NSX\nNovemberAMT 1:25 1966 Ford Galaxie 500\nSeptemberICM 1:24 scale Ford Model T 1911 TouringMoebius Models 1:25 scale 1971 Ford Ranger XLTJulyMonogram's 1:25 scale '57 Ford Del Rio Ranch Wagon 2 'n 1 KitFebruaryRevell's 1:24 scale TrabantsAMT 1:25 scale '62 Chevrolet Bel Air SSAMT 1:25 scale Chevrolet Corvair\nOctoberTamiya 1:35 Toyota Model AB PhaetonSeptemberMPC 1:25 Ohio George Malco Gasser 1967 Mustang MPC 1:25 1969 Dodge Charger - Dukes of Hazzard General Lee - Snap Kit Takom 1:35 German Civilian Car\n2015 was an auspicious year for NSX aficionados, as the legendary car's 25th anniversary was marked with the announcement of the new second generation production NSX at the Detroit Auto Show. It went on sale to great acclaim in August of this year (2016). An exceptionally lightweight body utilizes aluminum, high strength steel and carbon fiber components, while power is provided by a midship 3.5-liter V6 twin turbo engine in harmony with a 9-speed dual clutch transmission. The ground-breaking hybrid system orchestrates three electric motors for maximum control of all four wheels and outstanding cornering. With this much-anticipated super sports car starting to hit the streets, we have wasted no time in giving it the highly detailed Tamiya treatment and introducing it to the popular 1/24 scale Sports Car Series!\nAMT’s 1966 Galaxie kit is a favorite with modelers as it can be built in stock, custom and racing formats. You can build either the stock or SOHC engine. Often built as a vintage stock car racer, the kit includes many period parts to create a super detailed and authentic replica. With many chrome parts, a full color decal sheet with vintage artwork and a bonus mini box, this Retro Deluxe kit has it all!\nThe Ford Model T is an automobile that was produced by Henry Ford's Ford Motor Company from October 1, 1908, to May 26, 1927. Model T cars were produced in various types, in particular some 1911 cars had open topped five seat touring bodies. This kit features detailed interior, full front and back seat's with pattern, detailed engine, 2-piece hood, lantern sidelights, chassis and suspension, spoked wheels with white rubber tires, clear parts (windshield, mirrors and headlights), brass chrome-plated parts, and includes a painting reference.\nHornet Hobbies is proud to display this model built and finished by Will Murray.\nMoebius Models brings one of the classic pick-up trucks of all time in 1/25 Scale. Fully detailed, with the quality you expect from a Moebius kit. The 1971 Ranger XLT kit comes with an accurate interior and carefully recreated 390 CID V8 engine. It measures over 8\" long when completed, and includes clear and chrome plated parts, soft PVC tires and a decal sheet.\nDesigned to take passengers from the train to their destination, the station wagon quickly evolved into the family transport of choice for millions of Americans. The '57 Ford offered both 4-door and 2-door wagons. They featured Ford's new bow-shaped frame, along with a revised suspension for an improved ride. Today, the SUV has largely replaced the station wagon, but you can get your Rio right here! Kit features two optional Rio wagon builds: Police package with roof light, screen, and radio; or standard. Both include detailed 312c.i. Thunderbird V-8, separate frame, and soft black tires.\nTrabant 601S Universal 25 Jahre Mauerfall Like its West German counterpart the Volkswagen Beetle, the Trabant has also received a legendary reputation as a vehicle for the masses. The 601 in particular - the third and most built model in the Trabant series has long since been elevated to cult status. Mass production of a three-door estate car version of the 601 designated the Universal was launched in 1965. This vehicle also had body panels made of Duroplast developed in the body shop in Merane. For reasons of cost the easy to maintain Universal was also technically identical to the saloon. Over 500,000 units were built. It was also powered by an air-cooled two-cylinder two-stroke engine displacing 600 cc and producing the distinctive two-stroke sound.\nAn exceptionally rare Trabant was created in October 2014. To mark the 25th anniversary of German reunification, artists from the Leipzig Graffiti Association decorated the car with scenes depicting the Fall of the Wall . This unique, roadworthy piece of art on four wheels was auctioned off at the end of October 2014 in favour of the German Children's Cancer Aid charity, which campaigns for the fight against cancer in children. The kit includes a decal set with the unique 25 years Fall of the Wall motive for decoration.\nTrabant 601 Universal The Trabant 601 with its typical trapezoidal shape was the third and most prolific model of the Trabant series. It was produced from 1964 onwards. It was followed in 1965 by the 3-door estate version called the Universal . This was also powered by a 26 bhp air-cooled two-cylinder, two-stroke engine displacing 600 cc which emitted an unmistakeable sound. The long rear side windows of the Universal imparted a rather pleasing appearance. Of particular note was the boot space which after a quick conversion offered room for up to 1400 litres of baggage, and could be easily loaded thanks to the wide-opening tailgate. Over 544,398 units of this in reality universally usable estate car left the production line up to 1989.\nAMT® presents Joe Gardner's 1962 Chevy® Bel Air® \"Northwind\" Super Stock drag racer as a deluxe 2-in-1 kit! FOR THE FIRST TIME EVER, it will include parts for stock and mild custom versions too! Created from modern tooling, this highly detailed kit features a multi-piece interior assembly that is much easier to detail than conventional models. It includes beautiful full color decals to replicate the well-known racer along with drag slicks and headers. Exciting vintage style packaging will be irresistible to modelers and kit collectors alike!\nThe Chevy Corvair with it's rear-mounted and air-cooled engine has quite a history. AMT presents the 1969 model year in a Retro Deluxe edition, featuring many optional parts for customizing or creating a competition coupe! With its irresistible vintage packaging, it's a classic 3-in-1 kit, only from the Kats at AMT.\nThe Toyota AB Phaeton was a vehicle first produced in 1936 and it was part of the line started by the famed Japanese car maker. The A1 was the first prototype passenger car built by the company that became Toyota. It was redesigned and put into production as Toyota's first production cars, the AA sedan and the AB cabriolet. A total of 353 AB phaetons, including the military ABR version, were produced until 1942. The majority were eventually sent to the military and never made it into the hands of the public as was originally intended.\nThe AB was a soft-top variant of the Model AA, and inherited features such as the 3.4-liter inline-6 engine, live axle leaf spring front/rear suspension and body lines influenced heavily by U.S. road cars. It differed from the AA in its folding cloth roof, dedicated windshield design, and front-hinged door layout. To make room for the new folding auxiliary seats, the rear seat bank was moved somewhat further back.\nMPC reintroduces Ohio George's Malco Gasser Mustang, one of the most recognizable cars of the late 1960's drag racing era. MPC has executed major backdating on the existing tooling, along with developing a new, correct '67 flip front hood/fender unit. The kit is now even more exciting and accurate than the original, and it hasn't been available as George's car since the 60's!\nThe Dukes of Hazzard's infamous General Lee is being introduced in an all-new snap together kit! With parts molded in orange, tan, black, along with clear and chrome plated parts, modelers of any skill level can easily assemble a great looking replica with no paint or glue required! BRAND NEW TOOLING ensures a perfect fit!\nTakom (HK) International has created the \"German Civilian Car\" model kit with a terrorist figure and homemade Gas Rockets. This 1:35 scale kit is perfect for the appropriate diorama with Israeli or U.S. tanks.", "label": "Yes"}
+{"text": "Description: 2004 Chevrolet Suburban 1500 2WD powered by a 5.3L V8 engine and automatic transmission. Tires are in good condition with 25% tread. Runs and drives with 205,741 miles. On auction at our Phoenix, Arizona location.\nTransaction Fee = $100\n*See below for important disclaimer*\nThis unit can not be sold to an Arizona Resident.\nNOTICE: Please allow 21-28 business days for title processing.\nEngine light is on with codes P0178, P0455, P0452, U1000 & C0227 (will need code issues fixed in order to sell unit in AZ), engine has some small leaks and there is a coolant odor in the engine compartment. Front bumper has been replaced with a home-made tube bumper, passenger rear window is inoperable and the 3rd row seats are missing. View photos for cosmetic detail.\nALL UNITS ARE SOLD AS IS. Please click HERE for details prior to bidding.\n* Canadian Bidders: Please consult with your specific border crossing regarding the qualifications required for this unit to enter Canada.\nAll bids close at the listed Bid End time (Central time), or 5 minutes after the last bid. This page generated at 2/28/2020 9:28:12 PM.", "label": "Yes"}
+{"text": "What does a relay in the trunk have to do with the front grill in terms of RS swap? Also what exactly are the shutters for the diesel model and doesn’t the RS have its own version of the shutters I would like to do this swap as if it were stock and want to be 100% informed as to any and all caveats. Thank youI don't really want to lose the shutter system. If it mounts to the bumper, it looks like it all clips onto the lower grille. I wonder how difficult it would be to modify/swap over to an RS bumper. I'll keep my eyes out for one I guess and compare mine to it.", "label": "Yes"}
+{"text": "On July 28th, 2017 at approximately 1600 hrs, the Cranbrook Detachment of the Royal Canadian Mounted Police responded to a head on motor vehicle collision on Highway 3/93 east of Cranbrook, B.C.\nThe collision occurred when a westbound Honda Element was attempting to pass.\nThe Element struck a eastbound Honda Civic that resulted in the Honda Element going off road right and rolling down a steep ditch, while the Honda Civic rolled on the eastbound lane of the highway.\nThe driver of the Honda Element, a 66 year old female from the United States, the driver of the Honda Civic, a 86 year old male from Alberta were pronounced deceased on scene.\nThe collision is currently being investigated by the RCMP’s East Kootenay Traffic Services, SED Collision\nReconstructionist Unit and the BC Coroner’s SelVice. The roadway at the time of the collision was clear and dry.\nAlcohol, drugs and speed do not appear to be factors in this collision. Highway 3/93 was closed in both directions for approximatley five hours, a detour was available to motorists through the Wardner Ft. Steele Road.\nWhile investigating this collision, a UAV (unmanned Aviation Vehicle, commonly referred to as a Drone) flew through the collision scene. Not only was this insensitive and dangerous, it’s against the law. A person flying a\nDrone is prohibited to operate over or within the security perimeter of a police or first responder emergency operation site. A person flying such a vehicle is subject to being charged and having their Drone seized. Rules\nfor flying recreational Drones can be found under Transport Canada’s website.\nAny inquires with respect to the drivers should be diarected to the BC Coroner’s Service.\n– Cranbrook RCMP release", "label": "Yes"}
+{"text": "We are using cookies for a better user experience.\nAudi and Johannes Kepler University of Linz to establish center for artificial intelligence\nAudi and the Johannes-Kepler-Universität Linz establish the „Audi.JKU deep learning center“. Through cooperation with the Institute for Bioinformatics headed by Prof. Sepp Hochreiter, Audi plans to promote the use of artificial intelligence in automobiles. With the Audi A7 piloted driving concept, the company is testing piloted driving in the field.", "label": "Yes"}
+{"text": "Durable. Custom Fit. Reliable.\nShop Sisbarro Onsale Tires & Accessories for the best accessories made for your truck or SUV. Looking to maximize your truck with a lift kit or custom running boards and a grill? Our accessories boutique is fully stocked with what you need to have your truck looking and running its best. Whether you need a replacement or an upgrade, shop our selection online and in-store. Order your accessory online, or visit us in Las Cruces. Our experts will be able to recommend the right part for your truck or SUV, and you can browse what’s right for you.\nBrands We Carry\nSisbarro Onsale Accessory Department\nSisbarro Onsale Tires & Accessories is the premier location in Las Cruces, NM to outfit your Truck or SUV with custom accessories. OUR TEAM can help people select some of the specially designed accessories for that reason while also assisting people to go over their specific goals for their TRUCKS AND SUVS. Some of these features can have some practical benefits, even if that is not the main reason that people decide to install them. People can modify their TRUCKS AND SUVS for all sorts of different reasons. The important thing is for people to avoid limiting themselves. Southeast New Mexico is a great backyard for your next adventure, come see us to outfit your vehicle with the right accessories and tires to fit your lifestyle. Have a lifted truck that needs custom work, at Sisbarro Onsale Tires and Accessories we are your home for all things lifted trucks!", "label": "Yes"}
+{"text": "Used 2008 HOLDEN COMMODORE OMEGA VE for Sale\n|Location:||Northern Rivers Southport, QLD|\n|Transmission:||4 Speed Automatic|\n|Summary:||Used 2008 HOLDEN COMMODORE OMEGA VE for Sale in Southport Northern Rivers, QLD|\nThis family size sedan is in great condition and is presented in classic black. It has a powerful 6 cylinder, 3.6lt litre, petrol engine, coupled with a 5 speed automatic transmission. Log books are available for inspection. It is fitted with a total of 6 airbags including curtain airbags for passenger safety. Options include air conditioning, power windows, power mirrors, central locking, ABS brakes, CD stacker, dynamic stability control, immobiliser, traction control, cruise control, bluetooth connection, one owner. this Holden Commodore is in great condition and is also a one owner. It has passed our comprehensive workshop inspection. Competitive finance is available TAP. We can arrange freight anywhere within Australia. We are a family owned and operated multi-franchise dealer located on the Gold Coast and have been in business for 31 years. Stock Number: 75781 Reg: 29/03/2017 KMs: 97748 Year: 2008 Built: 02/08 Compliance: 0 2/08\nAll advertisements on this site have been fully prepared by the sellers without any input from Countrycars. Countrycars has no means of verifying any aspects of the advertisements whether the existence, quality, title, encumbrance, state-of-repair or condition or value of the vehicle described by any seller or any representation made by any seller. Countrycars does not and cannot make any representation with regard to any goods advertised in any respect.\nCountrycars strongly recommends that buyers do all due diligence including inspection, testing, obtaining expert's reports, reference checks and of-course, a REVS check (REVS can be reached on 133 220)\nPricing applicable for location listed above unless otherwise indicated", "label": "Yes"}
+{"text": "I have just fitted an Eberspacher D2 night heater to my VW T4 camper and have a problem with the fuel supply. I inserted a 'T' piece into the fuel line which runs from the fuel tank to the fuel filter - the 'T' was inserted about 5cm from the filter - but the heater only operates for about 5-mins before it cuts out due to fuel starvation. I had a D2 heater fitted to my previous T4 about 3-years ago by an Eberspacher approved engineer and a similar problem occured and I can't remember how the problem was overcome although I recall that he may have fitted a non-return valve as a solution. I do remember him saying that the heater was only operating whilst there was fuel in the hose and once depleted was cutting out. Can anyone please offer me advice on how to overcome this problem?", "label": "Yes"}
+{"text": "Johnsons Cars is only eight years old, but a string of acquisitions has enabled the Worcestershire business to expand to 17 outlets. The company sells new and used vehicles and offers servicing, spare parts and repairs. The firm’s sites are found across England from Oxford to Liverpool and include six Volvo and five Honda dealerships. Majority-owned by its management team, the company had sales of £152.6m in 2006, up from £139.9m the previous year.\nThis profile reflects the company at time of publication and does not reflect any changes that may have subsequently occurred. Fast Track and its sponsors do not endorse, guarantee or recommend investment in any of the companies.", "label": "Yes"}
+{"text": "IMPORTANT: Electrical items are covered by a 30 day EXCHANGE ONLY WARRANTY. There are no returns or refunds on such items.\nRestoration Correct Stamped From Spring Steel Correct Black Phosphate Coating Acts As A Retainer After Housing Is Installed Used With Housing Bracket When restoring your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977 Chevelle or Malibu sometimes the little parts can be hard to find. Used in conjunction with the rear speaker housing bracket, this system holds the rear speaker in place. This clip is made from durable stamped spring steel, with the correct black phosphate coating and used in conjunction with the housing bracket. Just in time for car show season your 1970, 1971, 1972, 1973, 1974, 1975, 1976, 1977 Chevelle or Malibu will look its best.\n|Chevrolet||Chevelle||1970 - 1973|\n|Chevrolet||Malibu||1973 - 1977|", "label": "Yes"}
+{"text": "Burnout Paradise Remastered, or any other game from the classic.\nHide the progress bar forever?\nSearch, mobile Racing Games, trade font Traffic, trade Stats / Partners monster truck games dirt bike games Copyright 2012.\nJoin EA racing Access, join Origin Access, feel the speed as you play the best racing games games EA has to offer on PC, gaming consoles, and mobile.Youve completed your Kartridge tormenta quest!Burn rubber in intensely hair-raising, flag-waving, trophy-winning car races.Official Site, forums, burnout Paradise Remastered, official font Site, forums, need for Speed Payback, livro official Site, forums.You can also test your skills in online street races against other players, making clutch moves as you compete in arcade-style language racing word games like.Whether youre looking for a race episode against the clock in a single-player mode, or want to show off your driving skills in multiplayer online racing game, EA has you covered.Keep exploring Kongregate with more badges and games!Shop on Origin, about, help, forums, newsletter.Real Racing 3 on mobile.Micro Machines, official Site, forums Need for Speed Official Site Forums Need for Speed No Limits Official Site Forums Need For Speed Rivals Official Site Forums Real font Racing 3 Official Site Forums Need for Speed Most Wanted Official Site Forums Real Racing 2 Official Site.Complete Initialization for 10 kreds, complete the Quest and earn an livro exclusive shiny kongpanion 10 kreds 15 « racing Previous, next congratulations!Spend your hard earned kreds on some of these games!All graphics, games and other multimedia are copyrighted to their respective owners and authors.Customize classic race cars and drift in high-speed police chases.Have you always wanted to be the fastest and dominate other sports cars on the track? . Race anywhere, communicator mark anytime with EA video games.\nBattlefield V, fIFA 19, apex Legends, the Sims.\nFree-to-play, shop on Origin, competitive Gaming, about.\nNews, studios, careers, top rated racing games help, forums, games, free-to-Play.", "label": "Yes"}
+{"text": "“Firstly, can I start by saying I'm delighted with the car and the service I have received so far from Northern Vehicles.\nI have experienced similar companies like yourselves and the experience was not great, however I can say from start to finish the service was nothing more than exceptional and every team member within Northern Vehicles I have dealt with...”\n2015 | Volvo V40\n“As a PCH newbie I was dreading this apparently long process of PCH after talking to friends that had dealt with over PCH companies, alas this could not have been futher from the reality after dealing with Northern Vehicles outstanding team. I was made to feel at ease and guided through an extremely quick and painless process. I am now...”\nMay 2015 | Volvo XC60\n“Love the car it's amazing! ...”\nAugust 2016 | Audi A6\n“I'm very happy with both the car and the service....”", "label": "Yes"}
+{"text": "Used Vauxhall Cars for sale in Welbourn, Lincolnshire\nMick Dwane are a used car dealer based in Welbourn, Lincolnshire. We offer quality used cars at affordable prices.\nFor more information on any of the vehicles below please contact us on 01400 273 264 or email\nAUTOMATIC. RARE SMALL AUTO, LOW MILEAGE OF ONLY 65,726, FULL SERVICE HISTORY INCLUDING TIMING BELT KIT 01/MARCH/2021 @ 59,407 MILES. 2 KEYS, ELECTRIC WINDOWS, CENTRAL LOCKING ALLOYS, VERY TIDY... View More", "label": "Yes"}
+{"text": "1st vs 2nd vs 3rd Gen Toyota Tacoma Drag Race & Mega Mashup Review\nhttp://www.TFLtruck.com ) The 2016 Toyota Tacoma is all new but how does it compare to the previous two generations of Toyota Tacomas. We decided to find ...\nDrag Race Turbo Pontiac GTO vs Supercharged Tacoma\nGreencove Springs, Fl Drag strip Correction: Pontiac GTO not G7 thanks for the correction! The racer said G7.\ntacoma drag racing with 2rzfe turbo 4cyl engine at Dallas dragstrip.\nTacoma drag racing at dallas dragstrip with org 4cyl turbo engine http://theturbodave.com/\nRednecks street racing TRD Tacoma vs. Stock Tacoma\n6cylinder TRD drag races 4cylinder 2wd Tacoma.\n2016 Toyota 4Runner TRD Pro vs Jeep Wrangler Rubicon Drag Race\nhttp://www.TFLcar.com ) Which vehicle is faster: the 2016 Toyota 4Runner TRD Pro or Jeep Wrangler Rubicon? In this TFLcar drag race we find out.\n2016 Toyota Tacoma DC/LB 4x4 Drag Race\nBone stock (motor) TRD Off Road 4x4, double cab long bed, 3.5L V6, automatic. Lexus IS350 in the other lane. Kauai Raceway Park. Video by Aaron Imada.\nToyota Tacoma 1/4 Mile Drag Race\nI'm the silver truck, my ET was 17.653 was my first time on a strip.\n2012 Toyota Tacoma Drag Race\nMade fun of my buddy for buying a mini-van, so he entered us into a drag race. I still won.\nDrag Race Toyota Tacoma Vs Two NA Dodge Challenger\nGreen Cove Springs Drag Strip 11/9/2013 Please excuse my shaky videos my GoPro fell on the track and is currently being replaced!\n2008 Toyota Tacoma X-Runner Drag Racing runs 13.3 @ 105 MPH\nWorld's Fastest Toyota Tacoma Hilux 2RZ-FE 3RZ-FE Turbo Powered Drag Celica\nParadise Racing World's Fastest Toyota 3/4 chassis 4 Cylinder powered by a Toyota Tacoma 2RZ-FE Power Plant in a 7th Gen Toyota Drag Celica 6.92 ...", "label": "Yes"}
+{"text": "Are you tired of the mundane and ordinary? Do you crave the thrill of the extraordinary? Look no further! In this blog post, we will be delving into the world of luxury car service near me. Buckle up and get ready for an unforgettable journey!\nWhy Choose a Luxury Car Service?\nPicture this: you step out of a sleek, elegant vehicle, turning heads as you arrive at your destination. A luxury car service offers more than just transportation – it provides an experience. Whether you’re attending a special event, going on a romantic date, or simply want to treat yourself, a luxury car service adds a touch of glamour and sophistication to any occasion.\nThe Finest Luxury Car Service Near Me\nNow that we’ve piqued your interest, let’s explore the finest luxury car service options near you. Here are some top recommendations:\n1. Diamond Wheels: Where Elegance Meets Excellence\nDiamond Wheels is not your average car service. With a fleet of high-end vehicles, including luxury sedans, SUVs, and even limousines, they cater to the most discerning clientele. From airport transfers to corporate events, Diamond Wheels ensures a seamless and stylish journey.\n2. Platinum Rides: Unparalleled Comfort and Class\nPlatinum Rides is synonymous with luxury and opulence. Their fleet features the latest models from renowned brands, offering the utmost comfort and class. Whether you’re looking for a chauffeured ride for a night out or a memorable wedding entrance, Platinum Rides delivers an unforgettable experience.\n3. Golden Luxe: Where Luxury Meets Affordability\nAt Golden Luxe, luxury doesn’t have to break the bank. They prioritize affordability without compromising on quality or style. Their professional chauffeurs and well-maintained vehicles ensure a smooth and enjoyable ride, all at a reasonable price. Discover the perfect balance of luxury and affordability with Golden Luxe.\nEmbark on a journey like no other with a luxury car service near you. Indulge in the elegance, comfort, and convenience that these services offer. Whether it’s a special occasion or a desire for a touch of luxury in your everyday life, a luxury car service is the perfect choice. Experience the thrill of elite journeys and create memories that will last a lifetime. So, what are you waiting for? Buckle up and let the adventure begin!", "label": "Yes"}
+{"text": "Pondicherry might be India?s French connect city, but the Logan is the first successful French car in our market. Prior to this, we have had the Peugeot cars, but they never made a successful Indian story. Now even Renault has began its second Indian innings without any local joint ventures. Still t\nSame engine, same gearbox. Is one better than the other?\nThe Amaze was pretty much a landmark car for Honda in India. It was a car that was born out of gover\nThe entry level sedan segment has evolved to be one of the most important segments in the Indian mar\nThe Platinum Etios ups the sedan's premium game to appeal to private car buyers. Does it succeed?\nIt will help us serve you better content and best deals", "label": "Yes"}
+{"text": "Hapert tandem trailer v1.0\nHere comes a hapert tandem trailer for cars.\nFor use in the game, it has the following functions:\nLoading all fruits\n2500 liter capacity\nHinged rear side wall\nRetractable wooden ramps for driving on\nStraps for attaching bales and other objects\nAnimated jockey wheel and crank\nFor more information on the mods of MrWaeschi and the current WIP projects look at www.mrwaeschi.de over.\nI wish you much fun with the mod. It may also be offered on other sites for download, but keep the original download link and the description.\nModell: MrWaeschi Fabi\nTextur: MrWaeschi Fabi\nScript: MrWaeschi Fabi\nIdee / Konzept: MrWaeschi Fabi\nTester: MrWaeschi Team", "label": "Yes"}
+{"text": "Agricultural Diesel Solutions is known for their exceptional state of the art agriculture power modules for tractors and combines. Taking that same cutting edge technology and quality level, they have now engineered the all new Heavy Duty Truck Edition modules. They are designed for fuel economy with an increase in power of up to 30% over stock all while delivering fuel economy improvements of 10 to 20%.\nThe Heavy Duty Truck Edition module controls Timing, Boost, Fuel and other vital engine parameters to optimize the combustion of the engine. Unlike some other modules that only add fuel, this module adds Timing to keep exhaust gas temperatures close to stock levels even with added power. Controls Timing, Fuel and Boost. Fuel Savings of 10% 20%. 4 Adjustable On-The-Fly Power Levels.\nDoes Not Defeat or Bypass Emissions Controls. Installation Instructions with Color Photos. Simple Installation No Cutting or Splicing. Works in Both On-Highway and Agricultural Applications. The adjustable four position switch allows you to adjust on-the-fly from Stock, +10%, +20%, or +30% hp.Instead the module receives the data from the. And optimizes the signal to the engine to improve both power and fuel efficiency. True Plug-and-Play connectivity means you wont need to cut or splice any wires. Just connect the Heavy Duty Truck Edition module into your existing factory connectors. Agricultural Diesel Solutions Heavy Duty Truck Edition modules are easy to install and come with complete installation instructions with color photos.\nThe module has a sealed design to protect against non-uniform temperature gradients, humidity, corrosion and vibration. Only electronic components meeting industrial temperature performance are incorporated. Electronic design methodologies, technologies, and materials are selected to achieve minimal susceptibility to voltage spikes and glitches induced by environmental electromagnetic interference and severe duty environments. All electrical connections between circuit boards, switches, and wire harnesses are directly soldered.\nThis eliminates potential corrosion-induced high-impedance connections, like opens, shorts, and partial or intermittent connections. Electronics are potted in a slow-cure epoxy compound. All selector switches which are not potted are of an inherently sealed design.\nModule 31200 works in the following Cummins N14 vehicles. John Deere 550 LC & 750 LC Excavators. New Holland 9682, 9684, 9882 & 9884 Tractors. Versatile 2360 & 2425 Tractors. We will file a damage claim with the carrier.It is your responsibility to keep all original packaging. Inspect all products for damage and confirm product quantity at time of receipt. Signature of receipt is confirmation that product is received in good condition. The item \"ADS Heavy Duty Truck Power Chip for 1994-2003 Cummins N14 Celect & Celect+ 31200\" is in sale since Tuesday, February 6, 2018.\nThis item is in the category \"eBay Motors\\Parts & Accessories\\Car & Truck Parts\\Computer, Chip, Cruise Control\\Performance Chips\". The seller is \"parleys_diesel_performance\" and is located in United States.This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Colombia, Panama, Jamaica, Viet nam.", "label": "Yes"}
+{"text": "A translucent linered tape with a rigid band to lift pliable molding to allow paint coverage under the molding, thus eliminating a visible paint edge.\n3M™ Trim Masking Tape is designed to lift mouldings allowing complete paint coverage under the moulding while protecting the front of the moulding from paint overspray. The tape is suitable for every trim masking situation, including the masking of side mouldings, inset door handles, tail light assemblies, sidelight and headlight units. It eliminates sharp paint edges, speeds vehicle painting and improves vehicle throughput.\n- 10mm wide hard band designed to actually lift up the molding from the vehicle, allowing paint to flow under the molding\n- This tape works particularly well on flush mount windshield and back glass moldings", "label": "Yes"}
+{"text": "After a bit of an absence, I am back with a technically failed project. Rally Rac3r was built to be very fast with its 9:1 gear ratio, but the resulting low torque prevented reaching top speed in little time. It features exhaust pipes, opening gulling doors, rally-worthy lights along with accessory roof lights, rear spoiler, return to center steering with gear rack, smooth flowing aerodynamics, and more.\nAfter deciding that the original Rally Rac3r wouldn’t be suitable for a video, I ventured to build Rally Rac3r 2.0. This second version used rims from the 42000 Grand Prix Racer set and had a lower gear ratio of ~5.5/1. I was hoping that the more torque ratio combined with no tires (less friction) would result in a working, but instead the car could not overcome the larger diameter rims and the increased friction of the extra gears.\nThen came Rally Rac3r 3.0. Surely smaller diameter tires (compared to 2.0) with the same more torque ratio as version 2 would let this car move. Same problems.\nRally Rac3r 4.0 was my last attempt at a working, reliable version. Same more torque gear ratio, but with the tiny tires from the Technic Black Champion Racer set. The friction was too much. Also, upon deconstruction, I found that an axle was semi-stuck in one of the portal axle openings.\nSince I was unable to provide video footage of Rally Rac3r, it only seems right to show a preview of my upcoming 2010 Cadillac CTS-V replica with Lego Mindstorms Ev3. Enjoy!", "label": "Yes"}
+{"text": "Manx Grand Prix: Farquhar wins 500cc classic\nLast updated on .From the section Motorsport\nRyan Farquhar has won his second Manx Grand Prix race of the week, with victory in the 500cc classic.\nThe Dungannon man won the race by almost two minutes on his 1972 Paton to claim his eighth MGP title.\n\"We developed a bad misfire on the final lap and I thought I may have to retire, but I nursed it home,\" he said.\nCastletown's Chris Palmer finished in second place with Mark Herbertson third.\nMeanwhile, Mark Parrett won the Formula Classic race on a BSA Rocket 3.\nThe TT rider from Midhurst was the only finisher of the four who started the race.\nAlec Whitwell and Chris McGahan retired at Glen Helen and The Mountain Box respectively on their second laps, while Dave Madsen-Mygdal was black-flagged at Sulby Bridge with oil reported on his back wheel.\nParrett had an eventful race with no back brake from Ballacraine and was also black-flagged in error, for which he later received a time credit.", "label": "Yes"}
+{"text": "I have a 2003 Jeep Liberty. All of a sudden while driving I heard a clicking noise coming from the front passanger side tire area. The noise speeds up as I do and gets quieter when I speed up. It sounds like a card in a bike tire although the sound changed a little when I first sped up. Around 45mph it got very quiet although it was still there. Turning doesn't make a difference. The CV is good and the lugs are all tight. I have never heard this noise before in my life. Any ideas as to what it could be would be a huge help. OK I checked the tires and see nothing stuck in them. I did take it on the road again today and noticed that going over bumps slowly to hear any difference in noise it makes almost a grinding sound...sort of like a shock would when it's worn out. Then twice I heard a noise that sounded like it was coming from the back almost a binding noise like a brake grind sort of. I know sometimes a wheel bearing can \"throw\" it's noise. Could it be my wheel bearing or does it seem like 2 separate issues? Any other ideas?\nWelcome to Motor Vehicle Maintenance & Repair! Check and see if there is a rock stuck in the tread.– Pᴀᴜʟsᴛᴇʀ2 ♦Mar 7, 2019 at 22:47\ncheck to see if you have a stone or nail stuck in your tyre would be first move put your steering on full lock and rotate tyre slow by hand checking your tread they dont allways deflate if you pick up a screw or nail\nThanks for answering. I checked but unfortunately nothing in the tire, but at least it ruled something out Mar 8, 2019 at 15:54", "label": "Yes"}
+{"text": "2001 Dodge Ram 1500 Jack Points\nPosted on Mar 15, 2019 by Ella Brouillard\n2001 Dodge Ram 1500 Jack Points » thank you for visiting our site, this is images about 2001 dodge ram 1500 jack points posted by Ella Brouillard in 2001 category on Mar 15, 2019. You can also find other images like dodge wiring diagram, dodge parts diagram, dodge replacement parts, dodge electrical diagram, dodge repair manuals, dodge engine diagram, dodge engine scheme diagram, dodge wiring harness diagram, dodge fuse box diagram, dodge vacuum diagram, dodge timing belt diagram, dodge timing chain diagram, dodge brakes diagram, dodge transmission diagram, and dodge engine problems. Please click next button to view more images.\nHello beloved reader. Trying to find fresh concepts is one of the exciting activities but it can be also annoyed when we might not have the desired ideas. Just like you now, You are looking for unique options regarding 2001 dodge ram 1500 jack points right?\nActually, we have been remarked that 2001 dodge ram 1500 jack points is being just about the most popular subject at this time. So we tried to locate some terrific 2001 dodge ram 1500 jack points graphic to suit your needs. Here you go. it was coming from reliable online resource and that we enjoy it. We believe it bring interesting things for 2001 dodge ram 1500 jack points topic. So, what about you? Can you like it too? Do you ever totally agree that this photo will be certainly one of wonderful resource for 2001 dodge ram 1500 jack points? Please leave a comment for us, hopefully were able to provide more useful information and facts for future posts.\nThis excellent 2001 dodge ram 1500 jack points photo has submitted in by Ella Brouillard. We thank you for your visit to our website. Make sure you get the information you are looking for. Do not forget to share and love our reference to help further develop our website.\nFurther dttech also step further b f f cc furthermore moreover dodge ram diesel truck lgw as well as maxresdefault in addition d what jack points do you use jackpoints as well as silverado tailgate cables handle moreover astro as well as camaro glovebox stereo mount glove box radio along with d forumrunner. B F F Cc likewise Dodge Ram Diesel Truck Lgw further Astro additionally Silverado Tailgate Cables Handle further D What Jack Points Do You Use Jackpoints.\nNote : \"Any content, trademark/s, or other material that may be found on the Wiring Diagram Images website that is not Wiring Diagram Images property remains the copyright of its respective owner/s. In no way does Wiring Diagram Images claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner\".\nKeywords for 2001 Dodge Ram 1500 Jack Points :\nRelated Posts of 2001 Dodge Ram 1500 Jack Points :", "label": "Yes"}
+{"text": "Mercedes has pulled the plug on at least one advertisement for the new E-Class after multiple groups reached out to the Federal Trade Commission to investigate the ad campaign for overstating the vehicle’s driver-assistance systems.\nThe 2017 Mercedes-Benz E-Class features the company’s ‘Drive Pilot’ system which is intended to help with lane-keeping and adaptive cruise control, and on the freeway can be used to control the car for 30-second intervals before alerting the driver to touch the steering wheel again.\nThe ad campaign for the launch of the new E-Class may have been exaggerating on the car’s driver assistance systems and its capability, starting with a print ad touting the E-Class as a “self-driving car from a very self-driven company,” as well as a commercial showing the driver removing his hands from the wheel while driving.\nThe commercial was called into question by various safety groups yesterday and was brought to the attention of the Federal Trade Commission to investigate. Mercedes later confirmed to Automotive News that it was pulling the ad from rotation:\nMercedes spokeswoman Donna Boland told Automotive News Thursday afternoon that the automaker has decided to take the ad out of the E-class campaign rotation because of the claims.\n“The new 2017 E class is a technological tour de force and is a significant step towards achieving our vision of an accident-free future,” Boland wrote in an email. “We do not want any potential confusion in the marketplace to detract from the giant step forward in vehicle safety the 2017 E class represents.”\nThe version of the ad uploaded to YouTube, which has now been labelled private, showed the driver releasing control of the steering wheel with a disclaimer (that only popped up for around seven seconds) at the bottom having to clarify that the “vehicle can not drive itself.”\nJalopnik has reached out to Mercedes to see if the rest of the E-Class marketing campaign has been affected, and here’s more from their spokesperson via Automotive News:\n“Bottom line: We take very seriously our reputation as a leader in automotive safety,” Boland said. “We’ve always stressed that its technology is designed to assist the driver, not to encourage customers to ignore their responsibilities as drivers.\n“While the new E class has a host of technology that will serve as the building blocks for increasing levels of autonomy (and which will be a prominent component of our marketing), it is not an autonomous vehicle and we are not positioning it as such.”", "label": "Yes"}
+{"text": "Thanks! Share it with your friends!\nYou disliked this video. Thanks for the feedback!\nWhile this was a track event at Streets of Willow Springs Raceway, we did drive with very safe open track rules and this was not a race not time attac...\n2013 Scion FR-S Pro-Celebrity Race Car, Shakedown And Media Preview\nCARS in the WORLD\nShowbizlikes Annonces Voitures dans le monde vendre acheter", "label": "Yes"}
+{"text": "Keep Paper Towels Inside The Car Boot\nHere's how to keep a paper towel handy inside the car boot\nPaper towels are always handy to have around, especially when you DIY on the go.\nTo keep paper towels on hand at all times, attach a roll to the inside of a car boot with an octopus strap.\nThe towel will be accessible without taking up space.\nVote It Up:", "label": "Yes"}
+{"text": "- Order Reprints\n- Print Article\n- Resize icon\nPicture the owner of a recreational vehicle and you might think of Robert De Niro stepping out of his Fleetwood Coach motor home in the 2004 comedy Meet the Fockers. Retiring baby boomers remain the predominant buyers of RVs, but there has been a new kid on the block in recent years: the budget-conscious-but-experience-hungry millennial. The rising generation is powering U.S. RV sales to levels not seen since the 1970s.\nThor Industries (ticker: THO), whose RV brands include Airstream, Keystone, and others, and Winnebago Industries...", "label": "Yes"}
+{"text": "Engine Mechanical problem\n1983 Lincoln Mark VI V8 Two Wheel Drive Automatic 123.00 miles\nI checked the oil and found it well over full, I drained it and found gas in it? The car is not used as I am redoing it, I do not know why I checked the oil but happy I did, can anyone tell me how it could have got in the oil, and is it a big job to fix it? Thank You so much, Have A Grate Day.\nhave the same problem?\nSaturday, March 7th, 2009 AT 6:57 PM", "label": "Yes"}
+{"text": "THE FUN BIKE EVOLVES\n- 93 HP\n- 66 LB-FT TORQUE\nAprilia Dorsoduro is the fun bike par excellence. Born out of an ingenious intuition by Aprilia, it was built with the sole objective of providing the most possible road riding fun, drawing from the best characteristics of sport bikes and the best characteristics of supermotards. The result is a bike with advanced technical solutions, agile and with performance at the top of its category. A truly special bike, achieved not only thanks to Aprilia's skills in packaging particularly efficient chassis architectures combined with high performance powerplants, but also thanks to collaboration with the Aprilia Racing Department, capable of earning a total of 54 world titles in the most difficult and selective competitions where they have participated, 7 of which in the world Supermoto championship.\nSloan's Motorcycle ATV\n2233 NW Broad St Murfreesboro, TN 37129\nPRE-OWNED Selling Prices shown are not final and do not include our $299 ($199 on Youth models) document processing charge, Tennessee sales tax, DMV Title and Tag fees, or any other taxes/fees required by law.\nMost used vehicles are sold \"As-Is\" with no warranty expressed or implied. Most models can qualify for Extended Service Protection at an additional cost. Contact or visit Sloan's for details.\nReasonable efforts are made to keep information on this website accurate, but Sloan’s does not assume responsibility for omissions or other clerical errors displayed on this website.\n2020 Aprilia Dorsoduro 900 Video\nThe ePrice for this 2020 Aprilia Dorsoduro 900 is only $0!", "label": "Yes"}
+{"text": "Greater Noida: Japanese commercial vehicle maker Isuzu today unveiled adventure utility vehicle D-MAX V-Cross at the Auto Expo here, which would be manufactured from April at its Sri City plant in Andhra Pradesh.\nThe company said it will soon make India a global hub for vehicle parts and components. Powered by a 134 hp, BS IV compliant, high pressure Common Rail Fuel Injection diesel engine, D-MAX V-Cross is a second generation pickup and is currently available in Europe, Australia, Thailand and South America.\nOn price of the model, Isuzu Motors India Senior General Manager Shankar Srinivas said: “We have indicative price at this moment… it is approximation and we have not finalised. Isuzu D-MAX V-Cross will be Rs 15 lakhs off showroom.”\nOn sales projections, Srinivas said the initial expectations are not very high as this is a greenfield space. “We would launch it subsequently early this year.” Isuzu Motors India Managing Director Naohiro Yamaguchi said: “The pickup market in India is expected to grow manifold and Isuzu has laid a strong emphasis on offering a range of its latest D Max products. We have sensed intense anticipation for a thoroughbred Adventure Utility Vehicle among Indians”. Isuzu, which is investing Rs 3,000 crore in India, would start the production of the vehicle by April.\n“India is gaining huge significance in the global arena, thanks to the fast moving economy and thrust on various growth factors,” said Isuzu Motors Japan Chairman and Representative Director Susumu Hosoi. He further added India will soon become Isuzu’s global hub for vehicle parts and components.\nOn the capacity of new units, Isuzu Motors India Deputy Managing Director Shigeru Wakabayashi said: “Our new manufacturing plant would have an initial capacity of 50,000 units. We have already tied up 100 key suppliers for our operations”.\nHe further added that India’s pickup market is expected to grow and Isuzu would be one of the leading player withn strong global expertise. The company has also expanded its dealership network to 27 locations is looking to increase it further.\n( To view our epaper please Tap here . For all the latest News, Mumbai, Entertainment, Cricket, Business and Featured News updates, visit Free Press Journal. Also, follow us on Twitter and Instagram and do like our Facebook page for continuous updates on the go)", "label": "Yes"}
+{"text": "SUVs are trendy these days, and there are plenty out there to choose from.\nWith practicality and comfort, an SUV solves most needs in a complete package.\nBut new models can be pretty expensive, so it’s common for people to look for older SUVs.\nIn this article, we will answer the following question: what is the best used SUV to buy for your money?\nRecommended Reading: Our Top Picks — 10 Used SUVs with Best Gas Mileage\nWhat Is The Best Used SUV To Buy For Your Money?\nSome of the bestused SUVs for the money are the Honda CR-V, the Subaru Outback, and the Chevrolet Tahoe. There are plenty of great used SUVs out there that won’t break the bank, but figuring out what features you need and where you can compromise is the hard part.\nBut, with so many categories, it’s hard to list them all.\no, in this article, we’ll list some of the better options out there.\nWhat is the best used small SUV?\nSmall SUVs are ideal for those drivers that want to make the jump from a compact car.\nThe added ground clearance and larger cargo area make a world of difference. In addition, their smaller powertrains provide excellent fuel economy.\nPlus, given the smaller size, these aren’t expensive options.\nIt’s no surprise that the Honda CR-V is on this list.\nHaving dominated the reliability ranks for years, the CR-V is comfortable, spacious, and has good fuel economy.\nThough it might be more expensive than other models on this list, the higher price is worth it.\nThis small SUV isn’t only comfortable and reliable; it also comes with heaps of extras.\n2015 and 2016 models are a great buy, and you can expect to pay between $19,000 and $21,000 for them.\nThe Mazda CX-5 is an excellent used small SUV because it’s a complete package.\nIt has exceptional reliability, handling, and adequate interior space.\nIf you’re looking for one, the ideal engine is the 2.5L; it powers the CX-5 just right and has decent fuel economy.\nAn excellent year would be 2016, as it’s the final year before a major redesign, so most of the problems are gone.\nNevertheless, you can expect to pay between $18,000 and $20,000 for a great sample.\nWhile the first Tucson was a rudimentary SUV, Hyundai has gone to great lengths to improve its compact SUV.\nAs a result, the 2016 Tucson is an excellent option that’s cheaper than Mazda and Honda.\nIt comes with plenty of interior extras, plus a decent powertrain that gives good fuel economy.\nGiven its quality, you can expect to pay between $17,000 and $19,000 for them.\nWhat is the best used midsize SUV?\nMidsize SUVs are a complete package, especially if you have kids.\nThanks to a larger interior, and a more powerful engine, they’re great for long trips.\nSo, vacationing on the weekends got easier.\nPlus, there are more options out there as manufacturers realize that this is a popular segment.\nThe Chevrolet Traverse is one of the most popular midsize SUVs, thanks to its reliability, comfort, and low price.\nIt might not have the best fuel economy, but it doesn’t matter when you weigh the pros and cons.\nThe Traverse has impressive cargo room, a quiet ride, and outstanding reliability.\nAnother downside is sluggish acceleration, but it’s nothing that should put you off buying one, especially those between 2015 and 2017.\nYou should expect to pay between $22,000 and $25,000.\nThe Outback is a midsize SUV that can suit the adventurous one.\nIt has excellent ground clearance, an advanced 4WD system, and excellent performance.\nPlus, it has plenty of cargo room, so you can fit anything and everything you want.\nWhile fuel economy isn’t its strongest point, it’s still decent.\nPlus, with excellent safety ratings, it makes for a great family vehicle.\nYou can expect to pay between $22,000 and $24,000 for a 2016 Subaru Outback.\nWhenever you see used SUV lists, you can expect the Kia Sorento to be on top of them.\nThis midsize SUV offers everything that you need, especially the 2016 model.\nThe Sorento went through a significant redesign that year.\nIt comes with more cargo room, safety features, and slight upgrades in performance.\nOther years to consider are the 2017 and 2018 models, but these can be pricier.\nYou can expect to pay between $23,000 and $26,000 for them.\nWhat is the best used full-size SUV?\nFull-size SUVs are tough to categorize because some are massive, and others aren’t that big.\nSo, one way to go about this list is to think about what you need.\nFor example, if you have a large family and hauling plenty of kids around, then a third-row SUV is a great choice.\nBut do you want more than that? Then, you have to consider seating and more cargo room.\nSo, we’ll cover both.\nWe’re covering both these SUVs in the same category because they’re mechanically identical.\nThe only difference is in dimensions.\nThe Tahoe and Suburban are both large SUVs that can carry plenty of people and cargo.\nTheir powertrains won’t win economy awards but have plenty of power.\nThe ride is comfortable and quiet.\nBut, these SUVs use a body-on-frame platform, so their handling isn’t extraordinary.\nIn this case, we recommend that you look for a 2010 model, as they are reliable and cheaper.\nYou can expect to pay between $14,000 and $18,000 for them.\nAnother large SUV that’s very reliable is the Toyota Sequoia.\nThanks to its veteran engine and transmission, this SUV is reliable and has good power.\nIts interior is comfortable and full of luxury. Plus, the over-engineering that characterizes Toyota is evident.\nThe Sequoia has excellent reliability records. But don’t expect excellent handling characteristics.\nAny year between 2010 and 2014 is the way to go, and you can expect to pay between $17,000 and $21,000.\nIf you want to carry a lot of cargo and have class-leading towing capacities, then the Ford Expedition is your SUV.\nIt’s exceptionally safe, as it ranks high in crash ratings, plus it’s reliable. But, you have to be willing to pay a premium for them, as the Expedition has earned a very positive reputation.\nGood years include 2014 and 2017, and you can expect to pay between $27,000 and $31,000 for them.\nWhat is the best luxury used SUV?\nIf you want a bit more fancy in your SUV game, then you can consider luxury SUVs.\nThese span all the sizes, from compact to large, and include more European brands than the previous lists.\nThere are plenty of models out there, so remember that this is a summary.\nWhat is the best used small luxury SUV?\nThe Acura RDX is the best used small luxury SUV.\nIt has outstanding reliability with luxurious interiors, a comfortable ride, and a heap of features.\nPlus, resale values are high, so you have that in your favor when selling it.\nBut, you might not want to, as the RDX is an excellent choice.\nYou can expect good fuel economy, a responsive engine, and decent legroom in the back for adults.\nWe recommend the 2016 model, and you can expect to pay from $26,000 to $30,000.\nWhat is the best used midsize luxury SUV?\nThe Mercedes-Benz GLE is the best used midsize luxury SUV because it offers a complete package.\nIt’s luxurious, comfortable, handles great, and has exceptional performance.\nAs it’s tradition with Mercedes-Benz, you can expect the latest technology in every aspect, so safety ratings are high in the GLE.\nPlus, the AMG can provide you with excellent performance if you’re willing to pay a premium.\nPlus, expensive spares mean that the AMG version isn’t for everyone.\nThe best year to buy is the 2016 model, with any powertrain, and the price goes from $35,000 to $40,000.\nWhat is the best used full-size luxury SUV?\nIt’s Mercedes-Benz again, this time with the GL. Everything is a step above the norm, from the quality of materials to the technology and features.\nOnce you step inside, you know you’re in a league of your own.\nPlus, German reliability will give you peace of mind.\nAs you might expect, the GL isn’t fuel-friendly or cheap, but you’d be surprised by the diesel options. Although, they aren’t the most reliable powertrains.\nYou should opt for V6 engines or V8 if you want the complete package.\nYou can expect to pay between $37,500 and $45,000 for a 2016 model.\nHow to know which is the right SUV for you?\nThis article provides a small list of options, but plenty of SUVs out there can suit your needs.\nYou might feel overwhelmed when thinking about your next purchase, and that’s normal.\nThe first step is reading an article like this one, where you can find a great starting point.\nThe most important aspect of buying an SUV is what you need and what you expect. A lot of factors come into play when answering these questions.\nThink about how much money you are willing to spend, how many passengers you will be hauling, and what use you’ll give your SUV.\nBuying a used SUV is a great way to upgrade your current ride.\nSince there are so many models to choose from, you’re bound to find a good option and pay less than a new car.\nSUVs are extremely popular these days, so finding one with low mileage is easy.\nThat’s why many people ask: what is the best used SUV to buy for your money?\nThat’s why we wrote this article. In it, we covered small, mid, and full-size options.\nPlus, we included luxury options and provided you with several options of the best SUVs per segment.\nHopefully, the information here helps you find the ideal used SUV for you.\n- What Is The Best Used SUV To Buy With High Mileage?\n- What Large SUV Gets the Best Gas Mileage?\n- What Is The Best Used SUV To Buy For Your Money?\n- What is the Best Used Hybrid SUV to Buy?\n- Which Midsize SUVs Use Regular Gas\n- What Midsize SUV Gets the Best Gas Mileage (Revealed!)\n- What Small SUV Gets the Best Gas Mileage?\n- What Hybrid SUV Gets the Best Gas Mileage?", "label": "Yes"}
+{"text": "Carb legal is a classification used to indicate that an auto part follows the regulations of the California Air Resource Board (CARB) clean air standards. California CARB standards usually apply to headers, catalytic converters, exhaust kits, cold air intakes, and any other part that alters your vehicle’s emissions. You will notice on many of our Mustang exhaust parts, you will see a CARB Compliant label to indicate that it can be used in California.\nThe most confusing part of California legal car parts is the designation between two similar products, one being legal and one not. Auto part manufacturers, if they so choose to, can send off their part to a lab to have it tested for proper CARB standards and receive an EO stamp if the part passes. Many parts become non-compliant when they relocate or remove a sensor that will alter the vehicle’s emission output. If this output is higher than the vehicle’s standards, it will not pass CARB standards.\nMany exhaust headers alter the performance of your vehicle in such a way that increases the emissions output of your exhaust. Carb legal headers are aftermarket exhaust manifolds that have been tested and passed the carb standards. These headers have an EO stamp to verify that they have passed the test. The same goes for catalytic converters and cold air intakes.", "label": "Yes"}
+{"text": "Originally Posted by stevehnm\nCould be. I know there are some aftermarket synthetics out there for the cvt, but Amsoil doesn't have one yet so I'll probably just wait. Also, if the new factory cvt fluid can't handle it I'm not sure anything else will, or maybe it's a wear-in process that's causing it.\nThank you for the reply, can I ask you to tell me more about the specs of the new factory cvt fluid? And if I'm not bothering can you explain what do you mean by \"wear-in\"?", "label": "Yes"}
+{"text": "Austin Car Service (Texas)\nOur 3 passenger Lexus hybrid offers an elegant interior of leather and brushed aluminum in an ultra-quiet cabin, gives a smooth and sophisticated ride that maximizes power and comfort while minimizing greenhouse emissions.\nOur Full Size SUV delivers everything you'd expect in an extra-large utility with impressive room and numerous features (TV, DVD) for up to 7 passengers or 5 + luggage to and from the Airport.\nR&R Transportation- Limousine, Sedan, Hybrid-SUV and Car Service in Austin (Texas). Contact us now for affordable limousine and car service rates!", "label": "Yes"}
+{"text": "Mercedes enjoys an unchallenged monopoly over the podiums and the championships. Trailing almost 250 points ahead of Red Bull, they are en route to clinch their eighth Constructor’s championship. However, even they are worried if their supremacy is making F1 monotonous.\nLewis Hamilton stated a few weeks ago that F1 was getting boring again. If this is a fact, everyone on the board should be concerned about what to do to make the fast lanes exciting again.\nBernie Ecclestone, on his 90th birthday, revealed how he is also responsible for F1 turning out in this manner. In his interview with Sport 1, he recalled how he regrets the inclusion of hybrid engines in F1.\n“Since hybrid engines have existed, Mercedes cannot be beaten. At that time I agreed to the engines, but after a short time I realized what a big mistake that was. I wanted to change it again, but fell on deaf ears.” recalled the former F1 boss.\nIt is not just Bernie who has accepted Mercedes supremacy in the world of F1. Almost all constructors have given up hope to catch up with Mercedes anytime soon. McLaren and Renault were already there. Recently, even Red Bull principal, Christian Horner agreed that the Silver Arrows have made the most complete car of the era.\nThe winning streak of Mercedes goes on and on, making every race far less interesting. Although the races since the Italian Grand Prix did offer a lot of drama, none could challenge the AMGs from crossing the checkered line before everyone.\nAs Lewis grabs his world record with the Silver Arrows, even he looks ahead to the 2022 regulations. His hopes – at least some form of competition injected back into the sport. Though Bernie did not wish to express his boredom, it came across in his words.\nOn being asked whether he enjoys the races, the Briton replied, “To be honest, no. It looked artificial, with no atmosphere. It’s just not very nice to drive in front of almost empty grandstands. Those who are always in front [Mercedes] were also this time.”\nIt is an injustice for blaming Mercedes in this entire case. They did what they came to do. The supremacy they enjoy, the lead they nourish in every race, is long fought for. Therefore, they cannot take the blame for striving harder than others. It is like chiding Verstappen for driving better than his teammates.", "label": "Yes"}
+{"text": "dane cooks padded cement truck and when he drives his friends are in back spinning. and he feeds them watermelon jolly ranchers. cuz watermelon is teh best kind of jolly rancher and if you say its not and green apple is i will stab you in the jaw.\ntHE CT- 2004 is my new ride.\nby the brother May 02, 2006\n2 more definitions\nDane Cook's cement truck with padded cement drum for his friends to roll around in whilst eating watermelon Jolly Rancher candies. Dane custom made the 40\" rims on the CT2004 in his basement out of aluminum foil and ornaments. Makes Dane feel like a BAMF while driving it.\nDane Cook's ride, the CT2004.\nby BAMFmobile October 07, 2008\nA vehicle that is surprisingly similar to a cement truck, because that's what it is. Popularized by Dane Cook.\n\"I was driving around in my CT 2004, when i noticed that i noticed i jizzed in my pants\"\nby xfuzzballx February 12, 2009", "label": "Yes"}
+{"text": "World Motor Vehicle Production\nSince its inception, the corporate has put in place a sturdy and efficient data safety program to comply with existing legal guidelines and abides by the data safety principles. The Corporate Data Protection Policy lays out strict necessities for processing personal information of shoppers, business partners, employees or some other individual. Ensuring knowledge protection is the foundation of trustworthy business relationships and the status of FPT Software as a primary-class enterprise associate. Established in 1999, FPT Software has expanded its international presence to 24 nations and territories, serving more than 600 customers worldwide.\nASG’S annual examine discovered 37 electrified models – 15 full battery electric autos and 22 plug-in hybrid automobiles – up from just eight manufacturing models in 2018. ASG’s 2019 Best-in-Class selections, embrace forty models that span thirteen unique lessons – from Mini-Compact cars to Full-measurement SUVs, and practically every little thing in between. These top choices all earned distinguished honors for their best-in-class performance in ASG’s financial, environmental and all-around performance assessments, per ASG’s 2019 Automotive Performance Index (API).\nWe assist folks research and purchase automobiles on-line and connect with vibrant communities of auto lovers. Our unbiased research brings clarity to advanced, world markets, serving to you concentrate on the facts and make the proper decisions. Specializing in professional analysis, know-how monitoring, market forecasts, consumer surveys, legislation guides and more.\n- FPT offers Large-Scale Integration growth and design services that assist handle challenges in growing microchips in automotive, computing systems, electronic devices, and so forth.\n- Car consumers prefer to research and purchase on-line, but filling out varieties and discovering specific information could be troublesome.\n- seventy four% of on-line patrons report they would be more likely to full varieties if that they had stay chat assist with vehicle specs or financial details.\n- We adopt an built-in and comprehensive design method focusing on varied elements throughout product improvement.\n- Businesses are ramping up their effort to optimize the business consequence with Cloud Computing, Big Data Analytics, Mobility and Internet of Things.\n- Give customers quick fingertip entry to your team to information them through the buying process with Conversational Car Buying™, one of the best stay chat and messaging resolution within the automotive trade.\nThe automotive business of Indonesia has become an important pillar of the nation’s manufacturing sector as lots of the world’s properly-recognized automobile companies have (re)opened manufacturing crops or expanded production capacity in Southeast Asia’s largest financial system. Moreover, Indonesia skilled a exceptional transition as it advanced from being a merely export oriented car production middle (especially for the Southeast Asian region) into a serious (home) car gross sales market due to rising per capita GDP.\nPower study, rising markets accounted for 51 percent of the worldwide mild-car sales in 2010. However, newer reviews confirmed the opposite; particularly that the automotive business was slowing down even in BRIC nations.\nFinancial companies is the biggest focus industry within the city, adopted by the information and communications expertise sector. “The Melbourne workplace fortifies our commitment to digital transformation in Australia — with the focus on the East Coast. Combining FPT’s offshore and nearshore improvement assets, we aspire to assist extra worldwide businesses optimize and digitize their IT operations in a cost-effective manner”, said Son Minh Nguyen, managing director of FPT Australasia. Gradually, this has caused labour shortage for Japanese automotive players and auto half suppliers, requiring them to alter the traditional enterprise administration, operation or product strategy. They are going through with the challenges in optimizing efficiency and product high quality despite declining employment.\nHarbor Freight carries many important automotive instruments, from professional scanner and diagnostic gadgets, to highly effective ground jacks, lifts, and stands. Harbor Freight additionally presents nice value in automotive accessories such as mild bars and winches, as nicely shop tools for fabrication and repair. Ford Will Let You Return Your New Car If You Lose Your Job within the Next Year Consider it extra of a security internet, quite than an excuse to purchase a brand new experience throughout unsure occasions. What You Need to Know About Volvo’s Biggest Recall Ever 2.18 million cars globally, constructed between 2006 and 2019, are being recalled for a seat belt cable issue. An Entire Fleet of Abandoned Duck Tour Boats Is Now Going to Auction These 19 amphibious automobiles from Jeep, Kaiser, Studebaker and extra were left behind after the tour company closed up shop.", "label": "Yes"}
+{"text": "Home | Testimonials\nI have used the Lucas Oil additives for both my transmission and power steering pump in my race car to help stop leaks, and it worked! Great Products.\nBrent Wofford Posted 10/12/2013\nMyLucasOil.com gives me access to all the Lucas Oil Products I need at an unbeatable price. Great site guys! Thanks so much.\nKristi Clark Encinitas, CA.\nLee Orme Posted 10/18/2013\nThe Lucas Oil Fuel Treatment brought my RX8 back to life. Now I use it everytime I fill up to make sure my baby is running her best. Thanks MyLucasOil.com\nPaul Bulkley Vista, CA.\nUse Lucas Oil Full Synthetic in my asphalt Modified and love it!\nRichard Lewis Posted 10/18/2013\nI had a great experience with MyLucasOil.com. The website is easy to navigate and the product was here in no time. I will use MyLucasOil.com for all my Lucas Oil Product needs.\nTom Hattori Las Vegas, NV.\nI use the heavy duty oil stabilizer in my racecar, the truck that hauls it and every other vehicle I own. I also swear by the fuel injection cleaner, power steering additive and the transmission additive. I use your grease and I enjoy showing off your logo on my racecar and with your hats and shirts.\nTravis Tedrow Posted 10/20/2013\nWe just ran three races in our Modlite using Lucas Synthetic Motorcycle 10w30 and decided it was time for an oil change. Upon draining the three race old oil, it looked as if it were new. We cut the oil filter apart to inspect it, and we found no signs of wear. That’s exactly how you want your oil to perform. We also changed gears in our quick change rear-end, and our Lucas 75w90 synthetic gear oil looked great.\nChuck Kuehl Posted 9/13/2013\nLucas Oil Riders Battle it out at Loretta Lynn's Ranch Photo: Ken [more]\nLucas Oil Raises Over $5K for Brett Downey Safety Foundation at Loretta [more]\nLucas Oil “Dunks for Downey” at Loretta Lynn’s Ranch Hurricane [more]", "label": "Yes"}
+{"text": "Suzuki Dl1000abs Vstrom Banner Poster on 2040-parts.com\nColoma, Michigan, United States\nCondition:New without tags\nManufacturer Part Number:DL1000ABS\nSize:36\" x 68\"\nUPC:Does not apply\nYou are purchasing one (1) new 36\" x 68\" dealer banner featuring the all-new Suzuki DL1000ABS VStrom. Banner is new and has never been hung. This banner is made out of heavy vinyl NOT paper. It's built to hang for extended periods of time. It would look great in a den or in someone's garage.\nColoma Motorsports is a multi-line franchised powersports dealership located in Southwestern Michigan. We have been in business since 1985 and carry: Motorcycles, ATV’s, Side by Sides, Snowmobiles, Personal Watercraft, and Pontoon boats; along with O’brien, KLIM, FLY and many other brands.\nYour satisfaction and feedback are very important to us, and we try to do all that we can to make doing business with us a pleasure. If you have any trouble with our transaction, please contact us at the number below.\nCheck out our Coloma Motor Sports home page to view our entire inventory of vintage motorcycle parts.\nYou may reach us at:\nPhone: 269-468-8600 (Ask for Carlos or Hunter)\nOur business hours:\nMon-Fri 9-6n Est, Saturday 9-4 Est,\nBanners / Flags for Sale\nThu, 05 May 2011 00:00:00 -0700\nThe Mercedes-Benz SLS AMG was instantly captivating for its looks and soaring gullwing doors. Now comes the roadster variant, which Mercedes is previewing in these shots illustrating the car during testing. The car will officially bow in September at the Frankfurt motor show.\nTue, 10 Jan 2012 00:00:00 -0800\nThe new Toyota NS4 was one of the surprises of the 2012 Detroit auto show. It's the Japanese car maker's vision of what a new family car will look like in 2015. That's not so far off, and nor does this show car seem too other-worldly.\nTue, 10 Apr 2012 00:00:00 -0700\nBarrett-Jackson's Palm Beach auction concluded on Sunday with more than $18 million in sales at the South Florida Fairgrounds. A 2011 Ford Mustang Shelby GT500 crossed the block for $1,000,000. That sale benefited the Wounded Warrior Family Support charity, which is not to be confused with the Wounded Warrior Project.", "label": "Yes"}
+{"text": "My 2002 F350 crew cab long bed has a 6-inch Rough Country lift, 20x10 BMF wheels with 35x13.50r20 Pro Comp Xterrain tires, and Baby Swamp injectors. Future modifications will include custom paint, custom fabricated bumpers, a PJP Hydra programmer, custom audio, and custom lights. This truck literally went from the middle class to rock bottom. Now it’s on its way to the top. Now I have built it back to where it is and will be in the future with the help of a few friends. It isn't the prettiest but what it has been through it is starting to get there fairly quick. It’s my daily driver, and I’m in the process of a show truck build.\nWANT TO SEE YOUR TRUCK FEATURED IN THE MAGAZINE? GO HERE!", "label": "Yes"}
+{"text": "This is the ultimate motorcycle if you ask me. I have wanted a jet bike since I was a kid when that Battlestar Galactica TV Movie had Starbuck and Apollo flying around on jet bikes. This jet bike doesn’t fly, but it is something special – a 1929 style Harley with two jet engines.\nI can only imagine it’s a flaming death trap waiting to kill anyone that sits on it. I can also imagine it will cook your legs all the way through before it blows up and kills you. The special bike was created by Robert Maddox with the goal of hitting 200mph.\nI can’t imagine going on a motorcycle at 200mph, much less on a bike with a pair of jet engines under your butt. Still, death on wheels never looked so cool. This is one serious cool bit of kit and it just sold to one lucky buyer on eBay for a whopping $25,000 (USD).", "label": "Yes"}
+{"text": "2010 Honda CBR600RR\nWhat do you call a middleweight machine that’s scooped up virtually every Best in Class crown from industry experts, not to mention World Supersport and AMA FX titles? Easy: the Honda CBR600RR. Honda’s tradition of winning continues for 2010, as the CBR600RR returns with its unbeatable combination of MotoGP-bred tech, power, light weight, and handling, highlighted by Honda’s revolutionary Combined Anti-Lock Braking System (C-ABS), the first ever on a production supersport motorcycle. And with three trick new color schemes to choose from, you’ll not only be on the best 600-class sportbike going, you’ll also be on the best-looking machine as well. The 2010 CBR600RR. Domination is in its DNA.\n|Engine Type||inline four-cylinder DOHC; four valves per cylinder|\n|Bore Stroke||67mm x 42.5mm|\n|Fuel System||Dual Stage Fuel Injection (DSFI) with 40mm throttle bodies, Denso 12-hole injectors|\n|Ignition||Computer-controlled digital transistorized with three-dimensional mapping|\n|Final Drive||#525 O-ring chain|\n|Rake Trail||23.5° 3.8 in.|\n|Seat Height||32.3 in.|\n|Front Suspension||41mm inverted HMAS cartridge fork w/spring-preload, rebound and compression|\n|Rear Suspension||Unit Pro-Link HMAS single shock with spring preload, rebound and compression|\n|Front Brake||Dual radial-mounted four-piston calipers with 310mm discs|\n|Rear Brake||Single 220mm disc|\n|Fuel Capacity||4.8 gallons, including 0.9-gallon reserve|\n|Dry Weight||410 lbs. (wet)|\nWe invigorate more thrills into our long-term Honda CBR600RR by fitting a slip-on exhaust and fresh set of motorcycle tires.", "label": "Yes"}
+{"text": "Lamborghini Unveils the 2023 Urus Performante Essenza SCV12 Special Edition\nOn 16th May 2023, Lamborghini uncovered a tantalizing offering, the Urus Performante Essenza SCV12 Special Edition, a model dedicated exclusively to owners of the limited 40-unit Essenza SCV12 track-only hypercar. This limited-edition super SUV has been meticulously crafted by the Lamborghini's Ad Personam department, ensuring a unique design tailored to each customer's specifications.\nAn Exclusive Touch of Carbon Fiber\nOne of the defining features of this special edition Urus is the extensive use of exposed carbon fiber elements, available in glossy or matte finishes. This includes not only the engine hood and roof but also the rocker covers, mirrors, and a carbon fiber frame featuring the Lamborghini logo set between the rear light clusters. The choice of finish echoes the treatment of the bodywork chosen by the customer, reflecting their unique taste and style.\nDedicated Ad Personam Livery\nAdding to the vehicle’s track-oriented character, Lamborghini’s Centro Stile designers have created a custom Ad Personam livery, with color combinations tailored to specific customer requests. Each unit is hand-painted in Lamborghini’s in-house paint shop, featuring a two-tone color scheme that echoes the customer's Essenza SCV12 car. A unique number is painted on the doors, and each example comes with 23” high gloss black wheels and black calipers by default, with options for customization.\nInterior Design and Features\nThe cabin of the Urus Performante Essenza SCV12 Special Edition is as exclusive as its exterior. The interior features Nero Cosmus (black) Alcantara upholstery with leather details, carbon fiber decorations, black anodized aluminum elements, and a contrasting red door handle. Two celebratory carbon fiber plaques are included in the passenger compartment, one with the Lamborghini 60th Anniversary logo, and the other with the vehicle number or the customer’s name, making each unit truly one-of-a-kind.\n2023 Lamborghini Urus Performante Essenza SCV12\nPerformance and Capabilities\nBoasting a twin-turbo V8 engine that delivers a whopping 666 CV (approximately 657 horsepower) of power and 850 Nm (approximately 627 lb-ft) of maximum torque, the Urus Performante Essenza SCV12 Special Edition is a testament to Lamborghini's continued commitment to high-performance engineering. This super SUV accelerates from 0 to 100 km/h (0 to 62 mph) in a mere 3.3 seconds and reaches a top speed of 306 km/h (approximately 190 mph). It has even set a new record in the production SUV category on the Pikes Peak International Hill Climb course.\nConnection to the Essenza SCV12\nFirst unveiled in July 2020, the Essenza SCV12 is designed solely for track use, with engineering solutions derived from racing. It features a naturally aspirated V12 engine, similar to the one used in the Aventador, and can deliver more than 830 CV (approximately 819 horsepower), partly thanks to dynamic supercharging at high speeds. The Urus Performante Essenza SCV12 Special Edition continues this dedication to high-performance and racing-inspired design and engineering.\nThe Lamborghini Urus Performante Essenza SCV12 Special Edition demonstrates Lamborghini's commitment to pushing the envelope of what's possible in terms of both aesthetics and performance. It's an impressive feat of automotive design and engineering, offering a unique blend of the brand's famous sportiness and a level of exclusivity that's hard to match. However, while the performance capabilities are undoubtedly impressive, it's important to note that this model is primarily targeted at a niche group of Lamborghini Essenza SCV12 owners, making it a truly bespoke creation.\nEmissions and Fuel Consumption\nWith performance comes responsibility. The Urus Performante Essenza SCV12 Special Edition, with its powerful V8 engine, has a combined fuel consumption of 14.1 liters per 100 kilometers (approximately 16.7 mpg) under the WLTP cycle. The combined CO2 emissions are rated at 320 g/km (WLTP), indicating Lamborghini's ongoing efforts to balance performance with environmental considerations.", "label": "Yes"}
+{"text": "Sinotruk 6X4 HOWO LHD/Rhd Style 371HP 375HP/Horsepower 10 Wheel Tipper/Dump Truck for Used/New. Inquiry Basket. Sinotruk HOWO New LHD/Rhd 8X4 371HP 50t 12 Wheels Dumper/ Tipper/Dump Truck for Tipper.\nLow Price Used 10 wheels HOWO Dump Truck Tipper 336HP 6X4 with Excellent condition and Strong Quality. 1. Based on STR technology from Austria 2. Cabin:Four point s suspension HOWO Cabin with spring and air shock absorber, VDO panel 4. Engine: 336HP WD615 STR engine ( from 290hp - 420 hp you can chose )\nHigh Quality With Good Condition Sinotruk HOWO 6x4 3 Axles Used Tipper Used Trucks Dumper 375HP 317HP Used Dump Truck For Sale $4,000.00-$6,000.00 / Unit 1 Unit (Min. Order)\nFairly used good condition 375hp 10 wheels 25cbm 6x4 sinotruck HOWO 30 ton dump truck for construction S M Z GROUP COMPANY LIMITED US$ 16.500,00-US$ 17.500,00 / eenheid\nChina Fairly Used Direct Selling 10 Wheels 375HP Used HOWO 50 Ton Used Heavy Duty Truck for Africa Market, Find details about China Tipper Truck, Tipping Truck from Fairly Used Direct Selling 10 Wheels 375HP Used HOWO 50 Ton Used Heavy Duty Truck for Africa Market - Weifang Changjiu International Trading Co., Ltd.\nHOWO Dump Truck Model 6X4 Tipper Truck in Qingdao, China Contact Seller for Price. Manufacturer: Sinotruk - Howo dump trucks. Model: HOWO. This seller has been contacted 11 times in the last week Nude. Payment terms: T/T, Western Union, Paypal, Money Gram. Transmission type: Manual. Power: Diesel. Load capacity: 21-30t. Emission\nSino Sinotruk Howo 371 6x4 8x4 Tipper Used Dump Trucks for Sale Price Second Hand Dump Truck 6 - 8L Euro 2 Diesel Euro 3 25-30T $13,500.00-$17,000.00 / Set 1 Set (Min. Order)\nHeavy Duty Dump Truck. 70 Tons Mining King 6x4 Tipper Truck 10 Wheeler With Front Lifting System. LHD New 6x4 Howo A7 40-50T Tons Commercial Heavy Duty Dump Truck Zz3257n3847n1. Fiji Heavy Duty Dump Truck 371hp 15M3 Capacity With Front Hyva Brand Lifting. Howo 371 20 Cubic Meter Dump Truck Heavy Dump Truck 6 X 4 Available. Prime …\nChina Fairly Used Sinotruck HOWO A7 Tractor Truck 6X4 Tractor Head with Excellent Condition for Africa 420HP Engine, Find details about China Based on From Mesde, HOWO A7 420HP Excellent Condition from Fairly Used Sinotruck HOWO A7 Tractor Truck 6X4 Tractor Head with Excellent Condition for Africa 420HP Engine - Qingdao Seize The Future Automobile Sales Co., …\nSouth Africa low mileages fairly used dump trucks sale 2017 2018 2019 years sinotruk howo 6x4 dump tipper truck hino trailer. camión de alta resistencia, 2021, 6x4, 336, 371, 420hp, a7. Sino Howo Truck Co., Ltd. $35,000.00-$35,460.00 / Unidad\nOct 03, 2021 · China Excellent Condition Fairly Used Sinotruck HOWO Dump Truck 6X4 Tipper Truck 371HP 10 Wheels for African, Find details about China Used Truck, Used HOWO Truck from Excellent Condition Fairly Used Sinotruck HOWO Dump Truck 6X4 Tipper Truck 371HP 10 Wheels for African - QINGTE GROUP SPECIAL VEHICLES CO., LIMITED\nNew and Used Sinotruk HOWO 6X4 371 420HP 10 Wheel Dump Tipper Cargo Lorry Van Tow Dumper Concrete Tractor Truck for Sale. US $ 12,000-39,999 / Piece FOB. MOQ: 1 Piece. Drive Wheel : 6×4. Since 2020. Contact Supplier. JINAN HEAVY TRUCK IMPORT & EXPORT CO., LTD. Trading Company.\nLooking for cheap Howo 6x4 Dump Truck products, dump truck manufacturers and Howo 6x4 Dump Truck factory directory? Check this category or use the search box above, you will find them all here! We offer you high quality tipper truck, dumper and used dump truck and make sure they meet your demand.\nChina Sinotruk Howo Truck Tipper manufacturers - Select 2021 high quality Sinotruk Howo Truck Tipper products in best price from certified Chinese Brand New Truck, Used Truck Engine suppliers, wholesalers and factory on Made-in-China.com 6X4 371HP A7 Sinotruk HOWO Dump Truck Tipper. FOB Price: US $ 10000-15000 / Piece Min. Order: 1 Piece\nDump Trucks For Sale In Washington - Truck Paper. Jul 06 2021 · About Heavy-Duty Dump Trucks. A dump truck also known as dumper tipper or a tip truck is used to carry loose material such as dirt gravel construction debris or other items that need to be picked up at one location and then dumped at a different location.\nChina 6X4 Howo Used Dump Truck catalog of Sinotruk HOWO 6X4 371 HP 375 HP 20 Cubic Meters 10 Wheeler Capacity 20 Ton Used Dump Truck, Hot Sales Chinese Supplier Used HOWO Dump Truck Used Dumping Truck in China provided by China manufacturer - Zhengzhou Huihe Vehicle Sales Co., Ltd., page1.\nChina Dump Truck catalog of Construction Truck Sinotruk HOWO Dumper /Tipper Truck 6*4 336/371HP, Golden Price Sinotruk HOWO 6X4 336HP Dumper Truck Tipper Truck provided by China manufacturer - QINGTE GROUP SPECIAL VEHICLES CO., LIMITED, page9.\nHOWO 6x4 30-50 Tons RHD/LHD Brand New Dump Trucks Our main products include full series products of CNHTC(HOWO,STR,Golden Prince,etc.), including dump truck, tractor truck, concrete mier truck, sprinkler truck, water/Oil tank truck, truck mounted crane, concrete pump truck.etc, and spare parts for them.\nChina Good Condition Fairly Used 375HP 12 Wheels 8X4 Sinotruck HOWO Dump Truck for Africa Market, Find details about China Used Sinotruck HOWO, Used HOWO Dump Truck from Good Condition Fairly Used 375HP 12 Wheels 8X4 Sinotruck HOWO Dump Truck for Africa Market - JINAN HEAVY TRUCK IMPORT & EXPORT CO., LTD.", "label": "Yes"}
+{"text": "It was only yesterday when we shared an excellent documentary about ALPINA and talked about how the lineup continues to grow. Case in point, these fresh spy shots seemingly indicate there’s a new member in the works. Or is there? If you recall, the company’s CEO Andreas Bovensiepen told BimmerToday back in July there’s simply no demand yet for electric ALPINA models from customers.\nIt’s highly unlikely for an automaker’s top brass to have a change of heart in a matter of months, so perhaps this BMW iX3 with ALPINA bits is not what it may seem at a first glance. The spy shots shared by Instagram user wilcoblok were brought to our attention by the same folks at BimmerToday and these depict a pre-facelift version of the electric crossover.\nThe timeless multi-spoke wheels with their elegant design are not the only clues that make us think of ALPINA as the camouflaged front apron appears to be borrowed from the XD3 with the Life Cycle Impulse it received this past summer. However, this doesn’t necessarily mean the prototype belongs to the Buchloe-based car manufacturer.\nThat’s especially true since the license plate doesn’t say OAL (from the Ostallgäu district) as it’s typically the case with ALPINA prototypes. Granted, the distance from Buchloe to Marktoberdorf (MOD) is only a half an hour drive. It would be fairly easy to imagine an ALPINA-upgraded iX3 with a front electric motor for substantially more power and all-wheel drive, but it’s too soon to say whether it’s going to happen.\nIt is also worth pointing out the timing as it might be a bit too late for this generation of the iX3 to receive the ALPINA treatment. The LCI model is already out and about, meaning the luxury crossover has entered the second phase of its life cycle. Corroborated with the statement made by the company’s boss about the lack of demand for EVs and his concerns regarding limited range, we wouldn’t get our hopes up just yet about an amped-up iX3.\nThe prototype may very well belong to ALPINA and the automaker could simply be evaluating the EV for future developments. Sooner or later, the company will have to adapt to stringent emissions regulations and gradually make the switch to zero-emissions vehicles. Consequently, there’s a lot of development and testing that needs to be done prior to entering the inevitable electric era.\n[Source: wilcoblok / Instagram]", "label": "Yes"}
+{"text": "0547 GMT October 24, 2017\nFrom Date :\nTo Date :\n( Seprate With , )\nEnergy firms battle startups to wire Europe's highways for electric cars\nThe battle over how and where Europeans charge their electric cars is expanding from the continent’s cities to its motorways.\nJaguar cars set to go electric from 2020\nJaguar Land Rover (JLR) will make all its new vehicles available in electric or hybrid models from 2020, it said two months after a similar announcement from Volvo.\nShifting to electric cars in long run\nBMW trainer: Iran can produce low-price cars for exports\nBy Katayoon Dashti\nIran to roll out Mideast's first electric cars\nIran is to become the first Middle Eastern country to launch electric vehicles, with Mitsubishi Motors' plug-in hybrid Outlander SUV expected to hit Iranian roads as early as fall.\nOil tycoon promises his next car will be electric\nYes, you heard that right, the boss in charge of Europe’s biggest oil company say his next car will be electric.\nStressed teachers offered electric shock therapy\nStressed teachers at a chain of academies in the UK are being offered electric shock therapy to combat anxiety and depression.\nElectric vehicles to cost the same as conventional cars by 2018\nThe cost of owning an electric car will fall to the same level as petrol-powered vehicles next year, according to bold new analysis from UBS which will send shockwaves through the automobile industry.\nGM plans to launch 10 electric cars in China by 2020\nGeneral Motors Co. plans to launch 10 electric and gasoline-electric hybrid vehicles in China by 2020, an executive said, as automakers speed up the rollout of alternative vehicles under pressure from Beijing to promote the industry.\nCar dilemma: Beijing wants electric, buyers want SUVs\nAutomakers face a dilemma in China's huge but crowded market: Regulators are pushing them to sell electric cars, but buyers want gas-guzzling SUVs.\nChinese electric car battery maker charges for global market\nA dusty village on the outskirts of Ningde, a third-tier city in China's southeast, seems an unlikely place for the headquarters of a potential global leader in future automotive technology.\nElectric shocks can help stroke patients recover full use of hands\nStroke patients could recover full use of their hands through a series of electric shocks, new research shows.\nElectric car sets world acceleration record\nAn electric racing car built by Swiss student engineers has broken the world record for acceleration by battery-powered vehicles.\nElectric field alters mechanical properties of nanomaterials\nMechanical properties of nanomaterials can be altered due to the application of voltage, researchers from University of Wyoming have discovered.\nAll rights reserved by iran Daily Online Copyright", "label": "Yes"}
+{"text": "RLL expands to three IndyCar entries for their 14th GP of Long Beach\nToyota GP of Long Beach event, the Rahal Letterman Lanigan Racing added a third IndyCar for Mike Conway. Team also has their two BMWs ready to contest the American Le Mans Series race; giving them a total of five racing machines at the venue.\nRahal Letterman Lanigan Racing began their 22nd consecutive season of competition in 2013. The Toyota Grand Prix of Long Beach (TGPLB) marks the team’s 14th time to compete in the event and their second since 2003 when Michel Jourdain, Jr. won pole, led a race high 48 laps and was in the lead when his car stuck in gear on his final stop with seven laps to go and ultimately retired in 15th place. Although the team didn’t compete in Indy car races here from 2004-2011 while they fielded a fulltime entry in the Indy Racing League (2004-2008), they did compete in the 2003 and 2004 Atlantic races with Danica Patrick and in the 2007 American Le Mans Series (ALMS) race. In 2009, the team returned to the streets of Long Beach in the ALMS with BMW Team RLL and finished on the podium each year since then including a win in 2011 with Joey Hand and Dirk Müller.\nIn their 13 previous Indy car races in Long Beach, the team entered 22 cars for drivers such as Bobby Rahal (1992-1998), Mike Groff (1994), Raul Boesel (1995), Bryan Herta (1996-1999), Max Papis (1999-2001), Kenny Brack (2000-2001), Jimmy Vasser (2002), Jourdain (2002-2003) and Takuma Sato (2012). In total, the team won three poles (Herta 1998, Vasser 2002, Jourdain, Jr. 2003); made five front row starts including an all-Team Rahal front row in 1998 (2nd – Rahal 1998, Brack 2001); earned their best finish of second place three times (Rahal 1992-1993, Vasser 2002) and earned five podiums (2nd - Rahal 1992-1993, Vasser 2002; 3rd - Herta 1998-1999). In 2012, Sato ran in the top-three most of the race and led two times for a total of 16 laps. He was en route to a then career-best series finish of third place on the final lap when he was the victim of “avoidable contact” by Hunter-Reay in Turn 8 and ultimately was scored with an eight place finish due to a multi-car pileup that blocked the track leading to the front straight.\nWe expect to have three very competitive Indy cars.\nThe team has prepared five cars for the Long Beach weekend – three of which are entered in the Toyota Grand Prix of Long Beach IZOD IndyCar Series race on Sunday including the No. 15 Midas / Big O Tires entry for Graham Rahal, the No. 16 Acorn Stairlifts entry for James Jakes and has added another entry for 2011 event winner Mike Conway – the No. 17 blu eCigs car. The team also prepares two entries under the name BMW Team RLL that will compete in the GT class of the American Le Mans Series race on Saturday.\nBobby Rahal on running five cars at Long Beach\n“Having an ALMS race on Saturday and an Indy car race on Sunday is like having the best of both worlds. There is great competition on all three days so if you are a fan going to the event, there is something for everybody. I really like the ALMS/IndyCar weekends we have had in the past at Baltimore and Mid-Ohio. For us particularly -- having a foot in both series -- it’s going to be extremely busy. I will be involved in both so for me personally it is going to be one of the busiest race weekends I can remember in a while. Not just with the BMW cars running but also expanding to three Indy cars. It’s going to be a little crazy for sure but having Mike Conway join the team and blu eCigs as a sponsor is obviously a big deal for us. We expect to have three very competitive Indy cars.”\nGraham Rahal on competitive runs in Long Beach and contact with Marco in 2012\nThe 2013 event will mark the seventh Champ or Indy car race here for Graham Rahal and first with his father’s team. In 2012, he qualified 15th for Service Central Chip Ganassi Racing (SCCGR), started eighth due to penalties to Chevrolet-powered teams and ran as high as fourth but contact with Marco Andretti limited him to a 24th place finish. In 2011, he qualified 16th for SCCGR and finished 13th. In 2010 he started and finished 22nd for Sarah Fisher Racing after contact. He started seventh and finished 12th for Newman/Haas/Lanigan Racing in 2009. In 2008 he started ninth and had a podium in sight when he was alongside third place but contact during this pass led to a 13th place finish. He started fifth in 2007 but the pit strategy of others and slow fuel flow related to teething problems for the all-new Panoz Champ Car on two stops limited his finish to eighth place.\n“My race last year was cut short because Marco and I got together but we ran very competitively and I’ve been competitive there almost every year in the race but I never quite get to the finish so this year I hope we make it happen for the Midas / Big O Tires team.”\nJakes hoping to fulfill past potential at Long Beach\n“The first year I raced in Long Beach, it was obviously my first time to see the place so it was tough. Then last year, practices were rained out on Friday. Some teams didn’t practice in the first one and the second one was cancelled so it was tough just jumping in for the third practice. We had a good race, we were running sixth and I made a mistake at Turn 1 and had to spin around and join the field again so that was disappointing. Generally we have been quick there; we just haven’t been able to show it. I think we can do that this year. I’m looking forward to going back.”\nConway on his 2011 win and past results at Long Beach\nThe 2013 event will mark the fifth for Mike Conway, 29, in Long Beach as well as his first IndyCar Series race in 2013. In 2012 he qualified 14th, started seventh after series penalties to Chevy-powered teams and retired in 22nd due to mechanical issues while driving for AJ Foyt Racing. In 2011, he qualified third, led 14 laps and won with Andretti Autosport. In 2010, he qualified 16th and finished 10th with Dreyer & Reinbold Racing. And in his first event on the streets of Long Beach in 2009, he qualified 16th and retired in 21st after contact. Conway confesses that once he won, the memories of the other events faded in comparison to his 2011 victory.\n“Last year, we burned down unfortunately. We had an engine issue and that kind of burned everything which stopped us so it was a shame. But we didn’t really have the car that dialed in anyway. The years before were up and down really. I can’t really remember the other races; they kind of all faded away after I won. It’s been a tough, tricky track; easy to make a mistake on. I suppose I really felt like I got to know what the car needs more than anything the last few years; what the tires are after. I think I really dialed myself into a lot of circuits, just getting the setups right. Long Beach has got its own unique corners to it so it’s not the same setup you would run at St. Pete. Even though it looks similar, the corners are quite different. You have different surfaces there as well. It’s quite a unique place but similar characteristics in terms of other street courses with big curbs, bumps and walls everywhere.”\nRahal, Jakes and Conway on what makes Long Beach special\n“Long Beach is special just because of the history of the event; it’s been around for so long,” said Rahal. “It means a lot to be a winner at that track. To have any sort of success there is tough; it’s not an easy track to win at. It would feel good for us to get one under our belt there.”\n“It’s a great event,” added Jakes. “So many fans turn out. There is a real buzz about the race. It’s always fun to get there three or four days before the race and be a part of it. The layout always produces a great event. I am excited to get back out there especially after a disappointing weekend in Barber considering we were pretty quick. Hopefully we can have a good result there.”\n“Long Beach is one of the stand-out events of the IndyCar season like the Indy 500,” added Conway. “Its one of the biggest street races the series goes to because a huge crowd turns up and there are a lot of parties going on Thursday, Friday and Saturday night. It’s a cool event and there are different categories racing and a lot of things for the fans to do to keep them occupied. There is a lot of history at that place but I didn’t know how much history there was until I was up on the podium there. I was really able to appreciate it when I saw all of the faces of the winners embedded in the floor; it was cool. Its one of the ones I look forward to.”\nRahal, Jakes and Conway on the challenges of the course\n“It’s tough because it’s like every other street course in that it is bumpy,” said Rahal. “It’s got some pretty high speed corners where it’s pretty easy to make mistakes. It’s probably one of the less forgiving of the street courses, particularly the fountain section. If you get in a little too deep there is just not enough time to react so that’s what makes it so tough.”\nIt’s a tricky course, especially in qualifying.\n“Obviously it’s a long race so it’s going to be physically tough,” added Jakes. “The biggest challenges are making sure you have a good balance in the low speed corners and good traction, especially for the race with full fuel on board. It goes without saying that the easier the car is to drive, the easier the race is going to be for you. I’m sure we will have a good car there and be in great shape.”\n“Its always different each time we go out because the grip level is changing due to the different categories racing on the track with different tires,” said Conway. “It can change things up. There are the usual bumpy corners but there are lots of corners where you are braking turning in and lots of medium speed corners and low-speed corners. It’s a tricky course, especially in qualifying. It’s really a rewarding lap because you run so close to the walls everywhere from turn in to exit, using as much curb as possible in places. It’s pretty cool. That’s the reason why the hardest corners are the flowing complex in the last section, the last three corners. Even though you have a tight, square hairpin, it’s quite an art to get through the corners before that to really get the thing stopped for the hairpin. So that last section can be a lot of time -- gained or lost.”\nRahal on getting the results the team deserves after challenging races\nRahal was in ninth place in the season-opener in St. Pete when the team discovered an electrical issue on Lap 22 under caution that shut the engine off intermittently and dropped him to 21st place. He soldiered on to finish 13th. At Round 2 in Barber, he set a lap time that was fast enough to progress to Round 2 and qualify in the top-12 at Barber if he had been in Group 2 but was in Group 1 and qualified 21st. He had to pit for a new nose on the opening lap after the field checked up and he hit Servia but he was 12th on the final lap until the last two turns when he ran out of fuel and finished 21st. Once the team returned to the shop, a malfunction was discovered that prevented the car from taking the full amount of fuel expected on the final stop.\n“Obviously we are focused on improving as much as we can and we think that there is good speed in the car in race trim,” said Rahal. “We have to make it better in all of the practice sessions and throughout the day but I feel good about it. We will start to get some of the results that we deserve. It’s a matter of time but hopefully Long Beach will be a good turn for us.”\nJames on turning strong performances into results\nJakes ran as high as sixth in the St. Pete season-opener and finished 15th after fueling issues. He qualified 11th at Barber but had to pit early in the race when the camber shims fell out of the left rear upright which put him two laps down to the leader. He soldiered on, set the fastest lap of the race and finished 23rd.\n“I think we just have to keep doing what we’ve been doing,” said Jakes. “The guys have been working hard at the shop and I have got faith in them. They will do all they can outside of the car and I will do my job inside the car. We have been pretty strong in certain areas but haven’t been able to show it. We’ll just keep working away and hopefully this weekend we will be able to do that.”\nConway on his first IndyCar race in 2013 versus others approaching Round 3\n“There will obviously be people who are race ready having competed in the first two events, but I have been thinking about Long Beach since the start of the year. I don’t feel like I am rusty. When I jumped in the car at Barber it was all good during the one-day test. I felt at home straight away in the car and that was the main thing. I felt comfortable. I have been doing laps of Long Beach in my head for the last few months so I feel like I am in tune that way. Getting used to the new tires Firestone is using this year and getting myself up to speed as soon as possible shouldn’t take long. With all the little things you miss with setups here and there and key areas – I just have to quickly make changes and hopefully have Graham help me get up to speed as quick as possible but I feel ready. I can’t wait to get in the car really. Racing at the six hour event at Silverstone (April 14) helped get me ready for race conditions.”\nRahal, Jakes and Conway on working together\n“Mike is going to be very quick around there,” added Jakes. “He won the race in 2011 and he’s going to be a great member to have on the team from a setup point of view and just extracting data from our car. All three of us will be very competitive so that should drive us forward on the grid. Everyone is looking forward to having him on board.”\n“I got a little taste of working with Graham and James at the one-day Barber test we had,” added Conway. “It seemed pretty good with what we were all feeling with the car. We all had similar comments so I think that is good. It will be good to know that if I make a change (to the car) and like it or if Graham makes a change and he likes it then we will be able to transfer that to the other cars and it will make us all quicker. I’m looking forward to getting stuck in. I’m sure we will be more competitive as the weekend goes on and all want to beat each other but at the same time we are there all working as a team and trying to get everybody up to the front. We all want a good result at the end of the day. We want to come away with a good finish and put on a good show for the fans and obviously the blu eCigs guys and show them a good time for their first Indy car race.”\nEarly arrivals for Rahal and Jakes to California\n“I will be keeping pretty busy in California when I’m not on track,” said Rahal. “I shoot a TV show on Monday, play some golf on Tuesday and go to the Columbus Blue Jackets versus the Ducks on Wednesday night with Honda and people from our sponsor Norm Reeves Honda. I am going to see my friends at (golf apparel), there is a (Graham Rahal) Foundation event and the RRDC event with (sponsor) TranSystems. It will be kind of fun to be in California early and keep busy.”\n“I will arrive early in the week to California and will play some golf and may go surfing depending on the surf conditions,” added Jakes. “I have a little bit of work to do with Travis Mathew; crash some golf carts with Graham in a little photo shoot so that should be fun. Then I will just get ready for the weekend. I can’t wait.”\nRahal Letterman Lanigan Racing\nChip Ganassi Racing teams sign Ryan Briscoe for 97th running of the Indianapolis 500\nSun Tzu and the Art of IndyCar\nRLL expands to three IndyCar entries for their 14th GP of Long Beach\nOne of motorsport’s worst-kept secrets now out in the open, and Romain Grosjean has been confirmed as an Andretti Autosport IndyCar driver in 2022. It marks a remarkable turnaround after the abrupt end to his Formula 1 career, and is a firm indication of his commitment to challenge for the IndyCar Series title\nThe 2021 IndyCar silly season is one of the silliest of all, but it’s satisfying to see so many talented drivers in play – including Callum Ilott. David Malsher-Lopez reports.\nThe ace 20-somethings in IndyCar have risen to become title contenders, but the best of the series veterans are digging deep and responding – and will continue to do so over the next couple of years, says David Malsher-Lopez.\nEmerson Fittipaldi’s decision to go racing with his brother led to him falling out of F1, but he bloomed again on the IndyCar scene. NIGEL ROEBUCK considers a career of two halves\nJeff Krosnoff was plucked out of obscurity to become a respected and highly popular professional in Japan, and then got his big break in CART Indy car for 1996. But a tragic accident at Toronto 25 years ago cut short a promising career and curtailed his regular teammate Mauro Martini's passion for racing.\nAt the halfway point in the 2021 NTT IndyCar Series season, we've had seven winners in eight races, spread between five teams – none of them Team Penske. In this unusual season, even by IndyCar standards, who’s excelling and who’s dragging their heels? David Malsher-Lopez reports.\nLong-awaited wins for ex-Formula 1 drivers Marcus Ericsson and Kevin Magnussen in IndyCar and IMSA last weekend gave F1 a reminder of what it is missing. But with the new rules aimed at levelling the playing field, there’s renewed optimism that more drivers can have a rewarding result when their day of days comes\nHelio Castroneves’ overwhelming vivaciousness outside the cockpit belies a hardcore racer who knows how to plot his moves – and then recall it all for us. A day after his fourth Indy 500 win, Helio explained his tactics to David Malsher-Lopez.", "label": "Yes"}
+{"text": "Boston-Based Mercedes-Benz Franchise Intercounty Truck & Van Achieves 40% Productivity Gains Thanks To Voice-Directed Maintenance & Inspection Solution From Dakota & Truckfile\n21st June 2023\nOperating as a Mercedes-Benz franchise for over twenty years, Intercounty Truck & Van covers the five counties of Northamptonshire, Cambridgeshire, Buckinghamshire, Bedfordshire and Lincolnshire with dedicated commercial vehicle dealerships to support its ever-growing and wide-ranging customer base.\nWith a company-wide ethos that ‘even the best trucks and vans are only as good as the support behind them,’ the business recognises that the standard of service which it offers its valued customer base is fundamental to growth, success and nurturing ongoing client relationships.\nWhen Intercounty’s Boston Depot wanted to improve upon its productivity\nlevels due to an ongoing increase in demand, they looked to technology\nto improve efficiency, accuracy levels and vehicle inspection processes in\norder to uphold its service provision in light of an ever-growing workload.\nRead our full case study here.", "label": "Yes"}
+{"text": "Hello everyone. I'm a member on the Gardentractortalk forum, but a friend suggested I join here because this is a great Wheel Horse community. With that being said, I'm selling my 1998 Wheel Horse 523DXI diesel garden tractor with a 52\" mower deck. It's 100% ready to work and mow and it does an excellent job. This is the earlier model with the larger 26.5HP DM950 Briggs/Daihatsu Vanguard 3 cylinder diesel engine. I've never owned an easier starting, more powerful and smooth diesel engine than this. It always fires right up and doesn't smoke, knock, or make any weird noises. Mechanically the tractor is in excellent shape. It has around 1400 hours and it operates extremely. It has the 52\" mower deck with hydraulic lift and I just installed a brand new OEM made in USA belt. The mower deck cuts beautifully and all the deck shields/covers are there. The gauges all work, and so do the headlights and taillights. There were a couple of hairline cracks on the mower deck that were professionally welded and now there's no problem with it ( there were no rust holes or anything like that). The tires all have excellent tread and hold air. Cosmetically, there are some minor issues, but it doesn't affect the function of the tractor. The seat has rips and they were covered with black duct tape, the previous owner spray painted red over the side panel decals and hood, the red paint is faded (as you can see in the pictures), and there's a couple of chips in the front lower plastic valance. You could put a coat of paint and decals on the tractor and it would look great, get some rubbing compound on the paint and buff it out, or use it as it is. $1750. Thank you.\nIf there are any other questions, please private message me. Feel free to come take a look at it and take it for a test drive. I'm in the Buffalo, NY area, but I might be able to meet you somewhere around Interstate-90 around Erie, PA or Rochester, NY if you would be traveling to pick it up.", "label": "Yes"}
+{"text": "The third round of the National Off-Road Championships in Bulgaria, Samokov Trophy 4х4 2021 edition, was held in Samokov on the first days of October. Bulgaria’s most successful representative for the Dakar Rally Orlin Alexiev did not take part in the contest because his new car was not delivered on time. This also interfered him from testing the four-wheel-drive the way he had earlier planned for.\nHowever, he got the chance to award the race winners in the rally category and talked about his plans for the future in front of all the fans and contestants.\nThe final races and the awarding ceremony taking place at the Rido motocross track were watched by over 5,000 spectators on a nice sunny day. The competition was started by the mayor of the Municipality of Samokov Vladimir Georgiev. In the center of the city, 53 cars from Bulgaria, Kazakhstan, Romania and Greece were involved. The organizers of the local sports club Off-Road Club Samokov 4×4 had mapped out over 500 racing kilometers for the following three days.\nRevving their engines across mountain climbs and descents – some breathtaking, some challenging – the drivers found themselves bouncing around a diverse terrain also consisting of technical ravines and riverbeds.The routedid run along the old road to Borovets, the road to the Black Rock, the Sitnyakovo road, and all the way back.\nSamokov Trophy is part of the sporting calendar of the Bulgarian Automobile Sports Federation and is organized with the support of the Municipality of Samokov.\nAs far as the highest-level category is concerned, where contestants use prototype race cars, Daniel Gospodinov and Ivan Penchevdominated the fierce competition from Kazakhstan, Turkey and Greece. With respect to the fastest category, debutants MetodiPaunov / VladiRadenkovleft the competition far behind with their flawless navigation and high average speed.\nIn the standard class car category,the duo of Emil Dimitrov and Andon Andonov from Petrich took victory, giving spectators a nice surprise.Lastly, in the reinforced standard cars category, father and son Tsvetanand KaloyanNaydenovigot had the best performance. Driving their Jeep Cherokee, they once againfended off everyone else.\nFor the first time in this race, they used a platform calledracetracking.org and the outcome was successful. This is an automatic satellite tracking system that also processes the results. It was developed by EasyTracking, a company headquartered in Varna. On the last day, the system was attacked by hackers but the delay was only 15 minutes.\nThe last round will be completed in the vicinity of Ruse from November 26thto 28th which is when the champions of Bulgaria will be announced.\nRally cars are very different from on-road cars. They are stripped down to the bone so they are much lighter and faster. The outside is reinforced so it can withstand the harsh terrains it is exposed to. There are roll cages that provide additional safety in case of an accident. This keeps drivers relatively safe.\nThere are no roof trims, air conditioning and paddings to ensure more comfort for the passengers. The sides of the seats basically hug the driver. This way they won’t slide around. While the car is overcoming various obstacles, the contestants need to be perfectly stationary; and a five-point harness seatbelt can help do the trick.\nEverything from the engine to the tires is modified. Each tire has to be strong enough to resist a lot of pressure in off-road conditions. It is manufactured to be able to absorb more impact than a standard tire.\nOrlin Aleksiev’s new car is supposed to be perfectly fit for the most gruelling of terrains, with an adjustable suspension and a 200-horsepower engine. Aleksiev joined forces with Todor Hristov who will be his designated navigator or co-driver, and both are expected to make a comeback at the Dakar Rally in the upcoming 2023.", "label": "Yes"}
+{"text": "At various points in your life, you’ll come across the valuable opportunity of upgrading the car you drive—with each instance posing unique considerations to account for.\nFor instance, as a working college student, you needed no more than anything with wheels that could get you from point A to point B without draining your gas budget. And then, being a young, thriving professional shifted your priorities well enough to require you to get a ride that was sleeker, more “showy” in a bid to impress bosses and clients.\nWith each phase of life that you go through, the things you look for in a vehicle are bound to change somehow. When you get to start a family of your own, you’ll experience the most drastic shift in priorities—you’re not just buying a car for yourself, but the most important people in your life, too.\nNow that you’re going to haul more people around and lug more items during your daily, weekly, or monthly trips, you and your family will definitely need a new ride that’s more rugged and dependable. Fortunately, this is where options such as SUVs, minivans, and larger wagons may seem practical to invest in.\nBut none, perhaps, are more apt for you and your family’s needs than a truck.\nWhat to Look For When Purchasing a Truck for Your Family\nTrucks stand out as the ideal family vehicle for several reasons. If you’re thinking about getting a new option from Lewis Motor Sales sometime soon, then there are a few advantages to look forward to in the long run:\n1. Unmatched Versatility\nOne of the most common reasons people end up buying trucks and never getting anything else again is that they’re the most versatile vehicles on the market.\nIn contrast to the olden days, where pickups were limited in terms of purposes, today’s models are capable of so much more thanks to smart design changes and technological developments. Whether you’re looking for something that can help you take large hauls home or bring your family on a cross-country trip with ease, a pickup is the way to go!\n2. Better Pricing\nWhen you take a look at pickup trucks nowadays and compare them to other available options in the market, you’ll quickly realize one thing: they’re significantly more affordable.\nFrom base models to premium trim high-tier options, you are sure to get the best bang for your buck. Whether you’re looking at options from Toyota, Dodge, Chevrolet, Mitsubishi, Ford, or Honda, you can always expect to find a pickup truck that suits your needs, wants, and budget.\n3. Improved Fuel Economy\nYes, you read that right: buying a truck will be much easier on your monthly gas budget than any other kind of vehicle. Today’s pickups are far more efficient fuel-wise, thanks to their diesel engines.\nWhen it comes to purchasing the right type of vehicle for you and your family, you can never go wrong with a truck that’s built and equipped to help with all your transportation-related needs. Once you invest in a pickup that’s outfitted with all the right features and functions, you’ll have something in your garage that you can depend on during any day of the week, anytime!\nIf you’re looking for a used car dealer in Brentwood with your best interests in mind, get in touch with Lewis Motor Sales. Visit or give us a call today so that we can help you find the ride of your dreams at an irresistible bargain!", "label": "Yes"}
+{"text": "Russian Time's Luca Ghiotto drove a fine race in Spain to finish second to pole position man Charles Leclerc in the 37-lap Circuit de Catalunya feature race, with Briton Oliver Rowland completing the podium finishers.\nTeam mate Artem Markelov produced another attacking drive from 13th on the grid after his fire extinguisher discharged during qualifying. Starting on the harder option tyre with the intention of a long opening stint, Markelov's strategy was compromised by a VSC followed by full Safety Car period, allowing those who had already pitted to close back up, but he still managed to finish eighth, claiming Sunday's Sprint Race pole, as well as the additional points for fastest lap.\nLuca Ghiotto: «I managed to lead by taking the inside line into Turn 4 on the opening lap but ran a little wide on exit and Charles re-passsed me. I then lost a bit too much time managing my tyres in the opening stint. I was quicker than Charles at the end of the race on the prime tyre, but not enough to catch him. But the car was great and it's another good result for the championship.»\nArtem Markelov: «I made up three places on the first lap and was going well until the Safety Car. For the second consecutive race I got the points for fastest lap and I'm still in strong contention, just two points behind Luca in the championship. I will start from pole in tomorrow's race and hopefully can score more strong points.»\nSvetlana Strelnikova (Team principal): «We ran the cars on differing strategies with Luca starting on the option tyre and Artem on the prime. Luca drove a strong race, balancing attack with the need to preserve the tyres, while Artem did well to score six points from 13th on the grid. Those points keep Russian Time at the top of the Teams' Championship, three clear of Prema. We look forward to another strong performance tomorrow.»", "label": "Yes"}
+{"text": "|FOR IMMEDIATE RELEASE\nJune 4, 2002\n|Contact: Scott Beliveau\nLittleton, NH -- Team O'Neil salutes the participants of the second 2002 Team O'Neil rally cross - On May 25th, over the Memorial Day weekend, Team O'Neil hosted the 2nd Rally X of the year. Mother Nature provided an exceptional day with moderate temperatures and crystal clear blue skies. Fun was had by all and the competition was fierce. With vehicles from a beautifully prepared group N Subaru WRX to an old Subaru RX (that's right not a WRX), a Renault GTA, and a TR7, to the Mendhams daily driver stock Honda Civic which claimed fastest time of day - and driven by Ted Mendham himself...you really need to get rid of that rev limiter Ted :)\nPiotr Ucher leads the points standings in 4 wheel drive modified with 3 straight wins. Emilio Arce took the class 2 (production 4 wheel drive) - a new comer to the series - he also claimed the number 1 spot in the overall time over 5 runs. Liam Brady in his consistent style was first in class 3 (modified front wheel drive), Joe Dias had been leading and providing some serious competition until mechanical failure killed his chances for the win. Ted Mendham claimed the class 4 (production two wheel drive) top spot with a blistering 5th and last run of 67.121! And in the rear wheel drive class (5), Brian Dennis triumphed (punn intended)...For complete results go to www.TeamOneil.com.\nA great contingent of volunteer workers and the participants kept everything moving smoothly by manning their stations when needed. Without the cooperation of all of you, this Rally X would not have been the success it was. A special thanks to Marc Goldfarb - directing timing, Richard Duplessie - watching finish and keeping all informed over his in-car PA system, Scott Beliveau our safety steward and especially Tim O'Neil and his assistant Tara.\nThe first 2002 Rally Cross was held in winter conditions in January of this year. Conditions were very slippery and created huge grins on the faces of participants. As the day wore on, and temperatures rose, the icy conditions became a combination of soft snow and got down to some frozen dirt. The pace got faster. With the fourth run showing the fastest times of the day - the first series points were awarded.\nIn February the second Rally X of the season was held at Pooh Corner Farm in Maine - a fantastically successful event that also had a night time component to it.\nThe next TEAM ONEIL Rally X will be held on July 13th - more Series points will be awarded and the contest rages on!!\nFor a complete Rally X series schedule go to www.ner.org. For complete Rally X series points go to www.ner.org/Rally/rallycross.html.", "label": "Yes"}
+{"text": "Sport trim Stellar Silver exterior and Gray interior. $3 000 below J.D. Power Retail! EPA 26 MPG Hwy/21 MPG City! Heated Seats Cross-Traffic Alert Dual Zone A/C Remote Engine Start Onboard Communications System iPod/MP3 Input Back-Up Camera Premium Sound System Power Liftgate All Wheel Drive Aluminum Wheels OPTION GROUP 01 Satellite Radio. SEE MORE!\nKEY FEATURES INCLUDE\nHeated Driver Seat Satellite Radio Smart Device Integration Brake Actuated Limited Slip Differential Blind Spot Monitor Hyundai Sport with Stellar Silver exterior and Gray interior features a 4 Cylinder Engine with 181 HP at 6000 RPM*.\nRear Spoiler MP3 Player Keyless Entry Remote Trunk Release Privacy Glass.\nA GREAT TIME TO BUY\nThis Tucson is priced $3 000 below J.D. Power Retail.\nWHY BUY FROM US\nBuy with confidence at Hubler Honda a dealer to help you!\nPricing analysis performed on 8/31/2023. Horsepower calculations based on trim engine configuration. Fuel economy calculations based on original manufacturer data for trim engine configuration. Please confirm the accuracy of the included equipment by calling us prior to purchase.", "label": "Yes"}
+{"text": "Vinyl roof refers to a vinyl covering for an automobiles top. This covering was originally designed to give the appearance of a convertible to models with a fixed roof, Vinyl roofs were most popular in the American market, and they are considered one of the period hallmarks of 1970s Detroit cars. An early example of this was the 1928 -1929 Ford Model A Special Coupe, that featured a roof completely covered with a vinyl-like material. This Model A Special Coupes vinyl roof had two exposed seams on the corners, with a lateral seam on the top covered with a narrow trim strip. The technique fell out of favor in the 1930s and 1940s, when smoother, envelope bodies began to be fashionable, for these designs, the look of the modern, integrated metal roof was important. Lincoln used the look on some of its Cosmopolitan coupes in the 1950s, as did the Kaiser firm on its Manhattan sedans. In the very late-1950s, Chryslers Imperial made a use of true vinyl on some models. Ford followed a few with a vinyl roof option on the 1962 Ford Thunderbird.\nThe vinyl covering proved popular, and some form of vinyl trim would be seen on Thunderbird roofs for the two decades. Other manufacturers noticed immediately that the new look could be profitable – it did not cost very much to add, Vinyl appeared on some coupe models in GMs 1962 full-size line. Chrysler made a vinyl roof available on the Dodge Dart, Ford soon offered it on the first Mustang as well. By mid-decade, four-doors as well as coupes could be topped with a number of colorful vinyls, from that point on, vinyl proliferated rapidly and became very common in most car classes by the late-1960s, even appearing on some station wagons. Vinyls were produced that mimicked other materials such as canvas, chrysler briefly produced some patterns, with paisley or floral designs – this was called the Mod Top option. The Mercury Cougar briefly offered a houndstooth pattern, there was even an aftermarket spray-on product that claimed to add that factory vinyl look. By 1972, even the humble Ford Pinto sported a vinyl roof option, at about that same time, the modern opera window first appeared, and it went so well with a vinyl surround that the two together became emblematic of American body design in the 1970s.\nDuring this period, vinyl with padding under it was sometimes used and Japanese manufacturers were not immune to this trend. Chrysler used it on upmarket models of its Hunter and Avenger saloons, Ford had vinyl roofs on Escorts, Taunuses, british Leyland had vinyl roofs on the last Wolseley and top-end Princess models, and optional for all other models. Toyota adopted vinyl roofs for its Corona Mark II, Crown and Century sedans in the mid-1970s, and they could be found on Nissan Laurels and Glorias\nPillars are the vertical or near vertical supports of a cars window area or greenhouse—designated respectively as the A, B, C or D-pillar, moving from the front to rear, in profile view. The consistent alphabetical designation of a cars pillars provides a reference for design discussion. As an example, rescue teams employ pillar nomenclature to facilitate communication when cutting wrecked vehicles, the B pillars are sometimes referred to as posts. This pillar provides structural support the roof panel and is designed for latching the front door. As the most costly body components to develop or re-tool, a roof and door design are a major factor in meeting safety. Some designs employ slimmer, chamfered windscreen pillars, A pillars, as perhaps the most complex of all the structures on the vehicle, the center or B-pillar may be a multi-layered assembly of various lengths and strengths. Closed vehicles without a B-pillar are widely called hardtops and have available in two or four-door body styles, in sedans and wagons.\nDesigns without a center or B pillar for roof support behind the front doors offer increased occupant visibility, while in turn requiring underbody strengthening to maintain structural rigidity. In the early 1970s, General Motors broadened their definition of hardtop to include models with a B-pillar although, up to then, thus a two-door hardtop or a three box designed coupé could have its rearmost pillar called the C-pillar even in the absence of a B-pillar. Conversely additional doors, such as on limousines, will create additional B-pillars, the B-pillars are numbered, B1, B2, and so forth. In addition to the pillar nomenclature derived from viewing an automobile in profile, some cars have a two-part windshield or a split rear window. Posts for quarter windows are not considered a named pillar, automobile design Automotive head-up display Blind spot Driver visibility Quarter glass Art of Automotive C Pillars—flickr photo group created 2005-07-26, webpage accessed 2008-02-10\nA touring car is an open car seating four or more. A popular car body style in the twentieth century, it declined in popularity in the 1920s when closed bodies became less expensive. A tourer, in Britain and the Commonwealth, is a vehicle, however. The term all-weather tourer was used to describe open vehicles that could be fully enclosed, a popular version of the touring car style was the torpedo, with the hood/bonnet line at the cars waistline giving the car a straight line from front to back. This eventually became the version of the touring car. In 1916, the US-based Society of Automobile Engineers defined a touring car as, the term has been defined as an open car seating five or more. Touring cars may have two or four doors, engines on early models were either in the front, or in a mid-body position. When the top was folded down, it formed a bulky mass known as the fan behind the seat, fan covers were made to protect the top. The touring car style was popular in the early 20th century, being an alternative to the runabout.\nMost of Model Ts produced by Ford between 1908 and 1927 were four and three-door models touring cars, accounting for 6,519,643 cars sold out of the 15,000,000 estimated Model Ts built. The popularity of the car began to wane in the 1920s when cars with enclosed passenger compartments became more affordable. In Australia tourers may have two or four doors, the belt lines of tourers were often lowered in the front doors to give the car a more sporting character. And would be named sports tourers, the torpedo body style was a type of touring body used from the early twentieth century until the mid-1920s. A torpedos hood line was level with the waistline, giving a straight line from front to back. The torpedo style became the style of touring car and the name fell into disuse around 1920\nRambler Six and V8\nThe Rambler Six and the Rambler V8 are intermediate sized automobiles that were built and marketed by American Motors Corporation from 1956 to 1960. Launched on 15 December 1955, the 1956 model year Rambler Six ushered a new era in motoring has begun according to George W. Romney, in 1956, the Rambler was sold through both Nash and Hudson networks of dealerships. This resulted from the merger of the two companies to form AMC in 1954, the new Rambler line created and defined a new market segment, the compact car as the automobile classification was called at that time. A V8 engine powered model, the Rambler V8, was added in 1957, imported vehicles from Europe and Asia were much smaller, but found buyers in North America. American Motors focused its resources to introduce a line of cars than were available from the domestic Big Three for the 1957 model year. The designs were developed by its Styling Director, Edmund E. Anderson, as the chairman and president of AMC, George W. Romney avoided a head-to-head battle with the U. S. automakers by focusing the company on the compact car.\nHe felt that with the Rambler I had the car of the future, the short-wheelbase two-door versions were no longer available. The new line retained the 108-inch wheelbase that was used for the previous versions of the Nash Rambler. The Rambler was substantially smaller outside compared to the popular domestic cars of the era. Construction was unusual, being unit body, the 1956 Rambler models were marketed under both the Nash and Hudson brand names. The cars were almost identical except for minor badge engineering that included different logos on the hubcaps, grille insert, the new Ramblers came only as four-door models. Along with the usual four-door sedan and station wagon was a new four-door hardtop sedan, Rambler introduced the industrys first four-door hardtop station wagon in 1956. The station wagons used the rear doors as the sedans with the back roof dipped lower over the cargo area. The wagon models were called Cross Country, an innovation for station wagons was Ramblers roll-down tailgate window, competitors models used upward-hinged windows.\nThe new car was described as distinct and different, can be recognized at any angle from its wide-open competition- type grille to the pronounced arch over rear window. According to automobile journalist Floyd Clymer and high-performance do not go hand in hand, but in the Rambler, though smaller, is safer than many cars. The welded, unitized body-frame construction offers above-average protection in collisions, the single-unit construction that was used by AMC on all of its models provided a marketing advantage by offering buyers a $25,000 personal automobile injury insurance policy at no extra cost. The Typhoon straight-six for the new Rambler was based on the previous 195.6 cu in block and it was the only engine available in the 1956 Rambler because the automaker was still developing its own V8\nThe Roadmaster is an automobile that was built by Buick from 1936 to 1958, and again from 1991 to 1996. Roadmasters produced between 1936 and 1958 were built on Buicks longest non-limousine wheelbase and shared their basic structure with entry-level Cadillac and, after 1940, senior Oldsmobiles. Between 1946 and 1957 the Roadmaster served as Buicks flagship, the Series 80, which belonged to an upper category trim package, had a 344.8 cu in straight eight engine developing 104 hp of power to 2,800 rpm. The next year the pace grew and was introduced a new high engine power unit developing 113 hp. In 1933 the model was completely revised, at the end of 1933 the 80 series was discontinued after 24,117 units produced. In 1936 the model was re-introduced and changed its name to Series 80 Roadmaster, the origins of the Roadmaster name date to 1936 when Buick added names to its entire model lineup to celebrate the engineering improvements and design advancements over their 1935 models. Buicks Series 40 was named the Special, the Series 50 became the Super, the Series 60 was named the Century, the Series 50 was retired, but new for the model year was the Series 80 Roadmaster.\nThe implications of the name were clear, for as the 1936 Buick sales catalogue said, the Roadmaster was introduced in a year when Buicks valve-in-head straight-eight engines were heavily revised. Buick reduced the number of engines from four sizes to two, a 233-cubic-inch, 93-horsepower job for the Special, and a big,320. 2-cubic inch, 120-horsepower engine for the other series. In addition to major engineering change 1936 was the year Buick adopted an all steel turret top. Coil springs were in the front, the Roadmaster was a big car, in sedan form tipping the scales at 4,098 pounds, some 88 pounds heavier than Cadillacs new Series 60. But pricewise, the Roadmaster was a tremendous bargain, the sedan sold for $1,255, $440 less than the least expensive Cadillac. The only other body style available was a convertible phaeton, priced at $1,565. With Roadmaster being a new model, and with Buick having totally restyled its entire line for 1936. But that was not the case, Buick was the only GM car, along with the Chevrolet Standard, to retain its basic 1934 styling for 1935, so the 1936 re-style merely caught Buick up with the rest of the GM marques.\nFor 1937, Buick moved to newly re-styled bodies along with all other GM cars, the Roadmaster gained a divided grille with horizontal bars. The center section of the grille was painted to match the body of the car, fenders became squared off and the headlight shells were gracefully streamlined. Overall height fell by 1.5 inches without sacrificing interior room, a new carburetor and revised camshaft raised engine horsepower to 130\nThe Newport was a name used by Chrysler for both a hardtop body designation and for its lowest priced model between 1961 and 1981. Chrysler first used the Newport name on a 1940 show car of five vehicles were produced. The first Newport, known as the Chrysler Newport Phaeton, was produced during 1940 and 1941 and it was a dual-cowl phaeton that used the Chrysler Spitfire 143 hp L-head straight-8 engine with dual carburetors coupled to a three-speed manual transmission. The Newport was based upon the Chrysler New Yorker, and was designed by LeBaron / Briggs Manufacturing Company designer Ralph Roberts, actress Lana Turner owned a Newport Phaeton, as did Chrysler founder Walter Chrysler, who used it as a personal car. Five are known to exist today, the Newport Phaeton served as the pace car for the 1941 Indianapolis 500 race. This pace car, chassis number C7807503, was the one that did not have hide-away headlights. Photos of the car can be found here, the Newport name was used during the 1950 model year to designate the two-door hardtop body style in Chryslers lineup.\nThe Newport version was available as the Windsor and New Yorker, the redesigned 1949 Town and Country was first proposed as a hardtop, however the body style only appeared in the models final year in 1950. Chrysler revived the Newport name for their new, full-size entry-level model for 1961, at a base price of $2,964, the Newport was the least expensive Chrysler model, intended to appeal to owners of the discontinued DeSoto brand. The perception of an inexpensive Chrysler hurt the marque in the run by cheapening the brands cachet. The base engine for the Newport was the 361 cu in V8 engine rated at 265 hp, optional was the 413 cu in and the 383 cu in that was mostly used in the Town and Country station wagons. All Newports could have been ordered with the 413 either single or dual four-bbl carbs and most of the 300 letter car options, except the four seats, center console. Station wagons from 1961 through 1964 featured hardtop body styling, with no B pillar, the canted headlight approach was previously used by Lincoln, and briefly by Buick, but by 1961 when this generation was introduced the feature was unique to Chrysler.\nThe 1962 model year Chryslers continued to use the 1961 body, the Newport was restyled alongside the New Yorker and Chrysler 300 for 1963, with this body style continuing for 1964. The 1963 model year was a major restyle without any tail fins, the 1964s saw the return of small, chrome-topped fins. The 1965s Newport was built on an all-new Chrysler C platform, shared with the 300 and New Yorker, along with the Dodge Polara, Styling mimicked the square lines of the Lincoln Continental and the 1964 Imperial, while wheelbases increased 2 in to 124 in. A new bodystyle for 1965 was a six-window Town Sedan that included a small side-window in the similar to the three-window design of 1950s cars. This design would return in the 1970s\nStudebaker /ˈstjuːdəbeɪkər/ STEW-də-bay-kər) was an American wagon and automobile manufacturer based in South Bend, Indiana. Founded in 1852 and incorporated in 1868 under the name of the Studebaker Brothers Manufacturing Company, the company was originally a producer of wagons for farmers and the military. Studebaker entered the business in 1902 with electric vehicles and in 1904 with gasoline vehicles. Until 1911, its automotive division operated in partnership with the Garford Company of Elyria, the first gasoline automobiles to be fully manufactured by Studebaker were marketed in August 1912. Over the next 50 years, the established a reputation for quality and reliability. After years of problems, in 1954 the company merged with luxury carmaker Packard to form Studebaker-Packard Corporation. However, Studebakers financial problems were worse than the Packard executives thought, the Packard marque was phased out, and the company returned to the Studebaker Corporation name in 1962. The South Bend plant ceased production on December 20,1963, according to the official Studebaker history written by Albert R.\nThe last part of the name, was changed to baker. In Albert Russel Erskines official history, John Studebaker, father of the five brothers, born in Adams County, in any event, John Studebaker moved to Ashland, Ohio in 1835 with his wife Rebecca and taught his five sons to make wagons. They all went into business as it grew to gigantic proportions with the country. The five sons were, in order of birth, Clement, John Mohler, Peter Everst and Henry Studebaker, Jr. became blacksmiths and foundrymen in South Bend, Indiana, in February 1852. They first made metal parts for wagons and expanded into the manufacture of complete wagons. At this time, John M. was making wheelbarrows in Placerville, the site of his business is California Historic Landmark #142. The first major expansion in Henry and Clems South Bend business came from their being in the place to meet the needs of the California Gold Rush that began in 1849. From his wheelbarrow enterprise at Placerville, John M. had amassed $8,000. In April 1858, he quit and moved out to apply this to financing the vehicle manufacturing of H & C Studebaker, which was already booming because of a big order to build wagons for the US Army.\nIn 1857, they had built their first carriage—Fancy, hand-worked iron trim\nChrysler New Yorker\nThe Chrysler New Yorker is an automobile model which was produced by Chrysler from 1940 to 1996, serving for several years as the brands flagship model. A trim level named the New York Special first appeared in 1938, until its discontinuation in 1996, the New Yorker had made its mark as the longest running American car nameplate. During the New Yorkers tenure, it competed against upper level models from Buick, the New York Special model was originally introduced as a distinct sub-series of the 1938 Chrysler Imperial. It was available in 1938 as a sedan with a 298.7 CID straight-eight engine. For 1939 it was expanded two more coupe versions and a two-door sedan and a larger, more powerful engine. Now the C23 series, it took on the New Yorker name, the first convertibles were introduced with the all-new body-design of the 1940 models. This, the C26 series, was the first New Yorker to be considered a model rather than as an Imperial version. It saw the introduction of Fluid Drive, a coupling between the engine and the clutch.\nThe only transmission available was the basic three-speed manual, there was the New Yorker Highlander, a special version with tartan seats and other interior elements. Lightly redesigned bodies were introduced for 1941, with the business now being of the three window design. The bodies were all marginally wider and lower, with increased glass surface, another new model was the Town Sedan with the rear doors having the hinges at the forward edge of the doors. This year, the Vacamatic was made available, although unlike the version sold on six-cylinder models, with America entering World War II on 7 December 1941, all automobile production came to an end at the beginning of February,1942. Thus, the 1942 model year was roughly half the normal length, Cars built after December 1941 had blackout trim. The 1942s were quite modern, of a design which was heralding the post-war ponton style with fenders more incorporated into the bodywork, the grille consisted of five horizontal chrome bars which wrapped around the front, reaching all the way to the leading edge of the front wheelhouses.\n12,145 New Yorkers of the C36 series were built this year, Chrysler would produce and experiment with engines for tanks and aircraft during World War II. One post-war application of this would lead to the creation of the first generation Hemi of the 1950s, after the war, the New Yorker became a separate series. Unlike most car companies, Chrysler did not make changes with each model year from 1946 through 1948. Thus models for 1946 through 1948 Chryslers have the basic appearance, noted for their harmonica grille\nInitially based on the smaller Prince Skyline, the Gloria line was merged with Nissan Cedric starting with 1971 models and both continued until 2004, when they were both replaced by Nissan Fuga. Glorias were sold at Nissan Prince Shop dealerships that were affiliated with the Prince company. The Prince G engine was used in the Gloria until 1969 and it was inspired by the Latin word Glory. In February 1959 the BLSIP Gloria was released with the 80 hp 1.9 L GB-30 OHV 4-cylinder engine, reflecting popular appearances found in North America, the Gloria used a styling feature on the front bumper, called Dagmar bumpers. The grille featured PRINCE in individual gold letters, th side trim was similar to the Skyline, except the chrome-framed painted strip ends at the rear door instead of the back of the car. The other side of the section is painted the same color as the car. Inside the Gloria used the dashboard as the Skyline, but a clock. The radio featured two speakers, a new idea for the time, the seats were similar but were trimmed in a plush cloth fabric.\nThe rear seat featured a fold down armrest, in April 1959, Crown Prince Akihito was presented with the first Gloria as a wedding gift. The Prince Automotive Industry was the official supplier to the Imperial Household Agency at that time. Previously, the Crown Prince was presented with the first Prince Sedan earlier, in February 1960 the BLSIP-2 was released. The front end was modified with quad headlights and although the opening remained the same. The rear end was redesigned, the tail lights were moved low to just above the rear bumper. The tail fins were capped off with steel trim that ran from one fin, down under the trunk lid opening. The trunk lid featured a Prince badge and a Gloria badge to the right of it, the panel between the tail lights was covered in metal trim. Side trim remained identical from the BLSIP-1, the BLSIP-2 continued to use the GB-30 engine. In February 1961 the BLSIP-3 was released and it featured the new 94 hp 1.9 L GB-4 inline-four engine. The front end was changed slightly, with the PRINCE grille letters removed, the side trim and rear trim panels remained identical to the BLSIP-2\nThe trunk or boot of a car is the vehicles main storage compartment. In South Asia the trunk is usually called a dicky/dala or slang diggy, the trunk or luggage compartment is most often located at the rear of the vehicle. Early designs included an exterior rack mounted on the rear of the vehicle to which it was possible to attach a real luggage trunk, designs integrated the storage area into the vehicles body and evolved to provide a streamlined appearance. The main storage compartment is provided at the end of the vehicle opposite to which the engine is located. Some mid-engined or electric cars have luggage compartments both in the front and in the rear of the vehicle, examples include the Volkswagen Type 3, Porsche 914, Porsche Boxster, Toyota MR2, and Tesla Model S. The mid-engined Fiat X1/9 has two compartments, although the rear one is small, easily accessible, and practically cuboid in shape. Rear-engined cars have the trunk situated in front of the passenger compartment, sometimes during the design life of the vehicle the lid may be restyled to increase the size or improve the practicality and usefulness of the trunks shape.\nExamples of this include the Beetle redesign to the 1970s Super Beetle, the door or opening of a trunk may be hinged at the top, side, or bottom. If the door is hinged at the bottom it is termed a tailgate, a bottom opening door is common on a station wagon, pickup truck, or sport utility vehicle. Traditional U. S. station wagons included a roll down window, because of the potential for carbon-monoxide fumes, the tailgate window on station wagons should be closed whenever the engine is running. Tailgates may contain accessories like a pocket for storage purposes, traditional station wagon and pickup tailgates can serve as a mount for a workbench. A 3-way tailgate is hinged at the side and bottom so it can be opened sideways like a car door, or downwards like a truck tailgate, the window can be opened to load small items. The door and hinge mechanisms of the 3-way tailgate are designed with special handle for opening in the selected direction, in the late 1970s, it was the most common station wagon tailgate arrangement.\nIf the door is hinged at the top it is termed a hatch, the trunk lid is the cover allows access to the main storage or luggage compartment. Hinges allow the lid to be raised, devices such as a manually positioned prop rod can keep the panel up in the open position. Counterbalancing torsion or other spring can used to help elevate, on cars with their trunk in the rear, lids sometimes incorporate a center mounted third brake light. A rear lid may have a decorative air spoiler, on many modern cars, the trunk lids can be unlocked with the cars key fob. In 1950, Ford introduced a trigger catch to allow for one-handed lifting until the trunk lid was automatically caught in the open position, in 1952, Buick marketed its counterbalanced trunk lid that practically raises itself and the automatic locking mechanism\nThe Toyota Crown is a line of full-size luxury sedans by Toyota primarily aimed at the Japanese market and sold in other select Asian markets. Its traditional competitors in Japan and Asia have been the Nissan Cedric/Gloria/Fuga and the Honda Legend, along with the defunct Mazda Luce, Isuzu Bellel, and Mitsubishi Debonair. Available at Toyota Store dealers in Japan, the Crown has been popular for government usage and it has been popular with Japanese companies as company cars along with use as a taxicab. In North America, the first through fourth generations were offered from 1958 through 1973 and it was replaced with the Toyota Corona Mark II, which was renamed the Toyota Cressida, after which the Cressida was replaced by the Toyota Avalon as Toyotas large sedan in North America. Later models of the GS and Crown have taken on a strong aesthetic kinship through shared design cues. The Corona, introduced as a companion to the Crown means crown in Latin and was initially exported as the Tiara.\nThe Camrys name is derived from the Japanese phrase kanmuri meaning little crown and the Toyota Scepter took its name from the sceptre, the Crown was exported to the United States from 1958 to 1973. Exports to Europe began in 1964 with the first cars going to Finland, other European countries which saw early imports of the Crown included the Netherlands and Belgium. Canada sold the Crown from 1965 to 1973, the United Kingdom was another market until the early 1980s. It was exported to Canada for a few years—1965–68, Australia was another important export market for the Crown—to the extent that it was manufactured there from the mid-1960s until the late 1980s using many local components. Trinidad and Tobago was another country where the Toyota market had a successful run, the Crown were introduced in 1955 in Japan to meet the demands of public transportation. The Crown was intended for purchase, while the Master served in a commercial form as a taxi, both with the same 1.5 L Type R engine used on their previous car.\nThe front doors open conventionally, and the doors are suicide doors. The appearance of the Crown shows some similarities with the European Ford Versailles, the Crown was designed to replace the Super but Toyota was not sure if its independent front coil suspension and its suicide type rear doors were too radical for the taxi market to bear. So the Super was updated, renamed the Master and sold in tandem to the Crown, while the Master was discontinued the commercial vehicle based thereon, the Masterline, continued to be offered until 1959. A six-door wagon known as the Airport Limousine was shown as a car at the 1961 Tokyo Motor Show. It did not go into production, in December 1955 the Crown Deluxe was introduced, a posher model equipped with a radio and heater as standard. The initial RS model received an update in 1958 to become the RS20, now with hooded headlights\nThe Ambassador was the top-of-the-line automobile produced by the American Motors Corporation from 1958 until 1974. The vehicle was known as the AMC Ambassador, Ambassador V-8 by Rambler, the name Ambassador had applied to Nashs senior full-size cars. The Ambassador nameplate was used continuously from 1927 until 1974, at the time it was discontinued, most Ambassador models were built in Kenosha, Wisconsin. They were built at AMCs Brampton Assembly in Brampton, Ontario from 1963 to 1966, Australian Motor Industries assembled Ambassadors from knock-down kits with right-hand drive. The U. S. fifth generation Ambassadors were produced by Industrias Kaiser Argentina in Córdoba, Argentina from 1965 to 1972, fifth and seventh generation Ambassadors were modified into custom stretch limousines in Argentina and the U. S. Following George W. Masons unexpected death in the fall of 1954, George Romney, succeeded him as president and CEO of the newly formed American Motors. Toward that end, he set out to increase AMCs market share with its Rambler models that were selling in market segment in which the domestic Big Three automakers did not yet compete.\nHowever, as sales of the large-sized Nash Ambassador and Hudson Hornet models slowed, it clear to Romney that consumer confidence in the historic Nash. Reluctantly, he decided that 1957 would be the end of both nameplates, and the company would concentrate on the new Rambler line, which was registered as a marque for 1957. American Motors planned to produce a stretched a 117-inch wheelbase version of the Rambler platform for Nash dealers to be the new Nash Ambassador, and another for Hudson dealers. Shortly before committing to production of the new versions of the Hudson. Its features included a 327 cu in V8 mated to a BorgWarner supplied 3-speed automatic transmission with push button gear selection. In 1956, AMC first produced its own V8, an overhead valve V8 displacing 250 cu in, with a forged steel crank shaft. In 1957, AMC bored and stroked the 250 CID V8 to 327 cu in displacement which when offered in the Rambler Rebel used solid lifters, in 1958, the Ambassador was equipped with a hydraulic lifter version of AMCs 327 CID V8 rated at 270 hp.\nAlthough AMCs 327 CID V8 shares its displacement with the Chevrolet small-block, the Ambassador was available in a body style exclusive to its line, a pillarless hardtop Cross Country station wagon. However, the car wore Rambler Ambassador badges on its front fenders, the 1958 Ambassador is a substantially longer car than the 108-inch wheelbase Rambler Six and Rebel V8, although both lines shared the same basic body and visual cues. However, all of the Ambassadors extra nine inches of wheelbase were added ahead of the cowl, the Ambassadors came with plusher interior and exterior trims while the front end incorporated the Rebel V-Line grille from the prototype Hudson model. Through effective market segmentation, the Ambassador was positioned to compete with the models offered by other automakers", "label": "Yes"}
+{"text": "A considerable measure of us has our own particular fancied stuff that we need to have the capacity to gather. We began as children attempting to gather baseball cards and knickknacks. Exchanging some of our additional things with different companions with the goal we should get a missing piece to finish our gathering. Intermittently these fixations on gathering never develop out of our frameworks. We have a tendency to keep on gathering different things just this time the greater part of the things are more lavish.\nMen are usually perceived as having a close affinity with automobiles. From the two wheeled variants as well as some 3 wheeled models of motorcycles. All the way to limited release car models that were sold in select countries only. Sometimes there are certain brands that sell their products configured for a certain region only. Making it hard for enthusiasts to import and use the car locally. That is the time to seek help from a right hand drive conversion company.\nSwitching a preexisting eventually left give get auto to the appropriate give get construction is not as simple. We would have got this kind of general thought within our brains of which it is a basic procedure for going the actual steering wheel by eventually left in order to appropriate. But also in simple fact it will take a lot more than of which in order to turn the setup.\nLegitimate weight dissemination must be painstakingly considered before starting the procedure. Since producers as a rule plan the model to uniformly disperse the heaviness of the parts. Making the autos more versatile to the street setup of the zone.\nSteering the vehicle with an uneven weight setup can either result into an accident waiting to happen. The heavier side would cause the balance to shift more to that direction. If left unchecked, the vehicle could slip from the road and lead to an accident. It is important to have a professional check the components before alteration could be done.\nConsidering that the driving a car instruments utilized in the initial setup are arranged for that distinct driving a car side, this kind of can make going the actual components towards the reverse side difficult. The sole choice is always to salvage components by additional makes or maybe versions. Not necessarily except if the business can easily get the actual portion from the public rep with all the correct setup performed.\nSome of these workshops rely on upon stock accessibility for the coveted setup. Now and again where the change pack is occupied, the shop may require the right pieces created upon appeal. This verifies that the instrument boards are accurately found and work perfectly with the variety.\nElectronic wiring for the signal lights are also rewired accordingly. Since the location of the toggle is usually the complete opposite of the original. The owner might need to check with the technician to finalize their desired function.\nMost popular makes are generally simpler to turn compared to extraordinary versions. Change packages for your popular type are generally ample already in the market. Particular requests usually are designed for extraordinary kinds. Proprietors need to be required during the amendment course of action. Assessment of the handling in a much governed surroundings later might help the master adapt quicker.\nGet a brief summary of the factors to consider when choosing a right hand drive conversion company and more info about a reputable company at http://www.uswd.com now.", "label": "Yes"}
+{"text": "2023 Ford F-250 XLT FX4 4X4 SUPERCREW\nExterior Colour: ICONIC SILVER\nInterior Colour: Grey\nBody Style: Pickup Truck\nFuel Type: Diesel\nDrive Type: 4-Wheel Drive\nEngine Type: 6.7L V8  Turbo\nCategory: Pickup Truck\nStock #: W2BA666P\nListing ID: 9482487\n- .AIR CONDITIONING -- CFC FREE\n- .DRIV/PASS FRONT & SIDE AIRBAGS\n- .FIXED PAYLOAD PACKAGE\n- .SIRIUSXM SAT RADIO\n- .SKID PLATES\n- 400 AMP DUAL ALTERNATORS -inc: 250 amp + 150 amp\n- 410 AMP ALTERNATOR\n- 5TH WHEEL/GOOSENECK HITCH PREP PACKAGE -inc: 1 frame under bed cross member, 5 pickup bed attachment points w/plugs and 1 integrated 7 pin connector on driver's side pickup bed wall, Note: shorter pickup boxes provide less clearance between the cab and...\n- 6.7L POWER STROKE V8 DIESEL\n- 9900# GVWR PACKAGE\n- AM/FM Stereo/Clock\n- CARPET DELETE -inc: Replaced w/black flooring\n- CLOTH 40/CONSOLE/40 SEAT\n- DUAL 68 AH AGM 750 CCA BATTERIES\n- ENGINE: 6.7L 4V OHV POWER STROKE V8 TURBO DIESEL B20\n- FIXED REAR-WINDOW W/DEFROST\n- FX4 OFF-ROAD PACKAGE -inc: Note: Specially tuned shocks intended for significant off-road usage will result in a firmer ride than may be desired when the vehicle is used for primarily highway driving, Hill Descent Control, Premium Off-Road Shocks, Tran...\n- MEDIUM DARK SLATE, CLOTH LUXURY CAPTAIN'S CHAIRS -inc: driver side power lumbar, Flow-Through Centre Console (Column Shifter), 110V/400W outlet in rear and storage\n- POWER-ADJUSTABLE GAS & BRAKE PEDALS\n- PTC Supplemental Heater\n- RIDEGREEN TIRES\n- Secure-Gard (4 year term, up to $5000 benefit)\n- TIRES: LT275/70RX18E BSW A/T (4) -inc: Spare may not be the same as road tire\n- TRANSMISSION: TORQSHIFT 10-SPEED AUTOMATIC -inc: selectable drive modes: normal, eco, slippery roads, tow/haul and off-road\n- Tire-Gard (2 year term, up to $850 benefit)\nAlthough the intention is to capture current incentives and prices as of the date of publication, pricing is subject to change without notice, and may not be accurate or completely current. While every reasonable effort is made to ensure the accuracy of this data, we are not responsible for any errors or omissions contained on these pages. Please verify any information in question with a dealership sales representative. Information provided at this site does not constitute an offer or guarantee of available prices or financing. The estimated selling price that appears after calculating dealer offers is for informational purposes only.\n* 3 Minutes to Apply Online, Get Approved Today.\nMake it Yours\nContact us Today!", "label": "Yes"}
+{"text": "\"I'd had some trouble getting work done on a Jeep with a catalytic converter problem. I brought it here and they did a masterful job of isolating the ...\"\n\"We had heard good things about Sprecher's, so we decided to give them a try when we were having trouble with our minivan. We were thrilled with the ...\"\n\"The mechanics are great. They are quick and accurate with the work they have done on my car repairs. I have nothing but good things to say about ...\"\n\"I've known Mike and Larry since they started their repair shop on Market Street and followed them to their current location, which is over 10 years. I like ...\"\n\"The salespeople do not pressure you, the service department is friendly and do repairs quickly. A great place to buy a car. We loved our vw bugs.\"\n\"I have been using Chip's Automotive for several years. I have used them for most all my automobiles & truck general maintenance but when there is an issue ...\"\n\"I was looking for used cars in Louisville, KY and after shopping at several stores and dealing with plenty of tricks and typical car salesman in Louisville a ...\"\n\"had him tint 2 vehicles they look great! Great service! Fast work! professional results! He also stands behind his work!\"\n\"My wife was travelling through this area, from out of state, and her Engine light came on. She was concerned and decided to stop at Mike Hall's Auto ...\"\n\"This staff of heating & air specialists are truly fantastic! Unfortunately, due to an older air conditioner/furnace unit and my lack of knowledge about proper maintenance, they've had ...\"", "label": "Yes"}
+{"text": "Best used car deals and best prices on preowned vehicles in Charlottesville Richmond Virginia\nYou need Video SEO OF YOUR USED CARS FOR SALE IN Cville and Richmond Virginia so that you can properly preview the vehicles for sale that you are considering buying or selling. It's easier faster and way more efficient that going in person to view the potential used truck or car that you are looking for...\nUsed pre owned vehicles trucks and cars for sale Charlottesville Virginia\nPost a Comment", "label": "Yes"}
+{"text": "After exploring the models ranking in April and year-to-date, lets dig a little deeper into the brands ranking and trends.\nRenault-Nissan is again the big winner this month, mostly thanks to big increases of Dacia and Nissan. The French-Japanese manufacturer is followed by the Volkswagen Group, where Skoda is responsible for 10.000 of the 13.000 added sales compared to last year. And PSA Peugeot-Citroën has some good news as well, with both brands back on track to increase sales.\nAt Fiat-Chrysler automobiles, the Fiat brand managed its third consecutive month of year-on-year growth, thanks to the continued success of the 500 and 500L. But on a smaller scale, Maserati and Jeep were among the biggest winners of the month in percentage terms. [Read more…]", "label": "Yes"}
+{"text": "Some highly talented artist from alvolante.it has rendered the upcoming Maruti Suzuki YRA premium hatchback and we have to say, it looks convincing as it can get. While the YRA hatch has been caught disguised several times, none describes the car in detail as does this version. To be launched in India this year, the YRA hatch will sit above Swift in the product hierarchy.\nStyling wise, the car looks ravishingly up market with a bold V-shaped chrome line along the front grill. The swept back headlights look almost similar to those on the Suzuki Swift and the bumper is stacked with vertical DRLs. The protruded rear end and the high waistline make it an eye-pleaser. The top-end YRA will come with LED infused tail lights, 15 inch, multi-spoke alloy wheels, chromed door handles, chrome trimmings below the windows and the rear windscreen.\nCodenamed YRA, the premium hatchback is expected to get interiors borrowed from the Maruti Ciaz sedan. There is no definite detail available for the engines, but the car is expected to get a 1.2 litre petrol unit and a 1.3 litre diesel unit from the Swift. Suzuki is also working on a 1.0 litre turbocharged petrol unit, which can make its debut in this car.\nWhile the European launch is expected in a couple of months from now, the Indian launch wil happen somewhere in the second half of 2015. Once launched, the YRA will compete against the upcoming Honda Jazz and to some extent, Hyundai Elite i20.\nImage Credit - alvolante.it", "label": "Yes"}
+{"text": "Monaro Local Area Command\nFatal Motor Vehicle Crash – Cooma\nA teenager died in a two-vehicle crash in the State’s South East yesterday.\nAbout 11.40am a Hyundai hatchback was travelling along the Monaro Highway towards Cooma, about 10km south east of Cooma, when it and a Toyota Land Cruiser four-wheel-drive, travelling in the opposite direction, collided.\nAs a result the driver and sole occupant of the Hyundai, an 18-year-old female German national living in the ACT, was trapped for some time before being released by NSW Ambulance paramedics.\nShe was taken by ambulance to Cooma Hospital but died.\nThe driver and sole occupant of the Toyota, a 68-year-old man, was not injured.\nInquiries into the cause of the collision are continuing.\nPolice will prepare a report for the information of the Coroner.", "label": "Yes"}
+{"text": "For Twitter users that follow Tesla's (NASDAQ: TSLA) Elon Musk already know now that the Model 3 will be debuted in March it was announced today via the social media site. This is exciting news because the USA today reported that it will ready in two years which will correspond with the completion of the GigaFactory, Tesla’s large battery manufacturing facility just outside Reno, NV.\nThe USA story and Tesla have not released the expected range of the Model III. So far, reports place the expected range of the car anywhere from 200 to 250 miles of pure EV range. Previously I have written about the anticipated range of the next generation Nissan Leaf and its expected range of 330 pure electric miles due out in 2017. So at this point the range question is still up for grabs. Will we know more in March? I expect so, but at this point the speculation will continue and we will have to wait and see whether or not Tesla bests the Nissan Leaf anticipated range or will they come in around the stated EV mileage of the Chevy Bolt (not to be confused with the Chevy Volt plug in hybrid car).\nOverall, the long awaited Model III will have competition by the time it makes out in two years.\nAlthough the lower gas prices have likely had a negative impact on EV car sales as of late, the longer term oil price will surely increase by 2017 and I have written articles previously speculating that current EV sales may be hurt due to the product announcement of these extended range EVs on the horizon. There truly is a pent up need for extended range EVs as many of the current offerings that go longer than one hundred miles are mostly plug in hybrids at this point.\nOverall we expected many more plug in hybrids and extended range pure Electric Vehicles within the next few years.", "label": "Yes"}
+{"text": "The automotive industry is in the midst of an evolution. Motor vehicles with electric drive systems are outpacing conventional gasoline models in terms of demand and affordability.\nAs a result, many manufacturers, either new or established, are planning to cater to the market for electric pickup trucks. These four-wheelers are often hailed as efficient all-rounders, off-road adventure vehicles, and even resourceful haulers.\nHere are 9 popular electric pickups with the best range.\nTable of Contents\n1- Rivian R1T\nRivian is an American auto manufacturer that is ready to compete with other electric trucks.\nIt launched the first model of R1T in 2018. The truck is primarily responsible for kicking off the rivalry between electric pickups, as it prompted the other manufacturers to launch their respective plans for this segment.\nRivian has delivered its promise of the most robust electric pickup in the market.\nThe R1T has a 300-plus mile range, and four motors connecting each independent wheel, making it an AWD (all-wheel-drive) automobile. It offers stunning acceleration performance for a large vehicle and offers a towing capability of approximately 11000 lbs.\nAdditionally, 0-60 times in just three and a half seconds. Combine that with an astounding amount of inbuilt storage that can be utilized as a bed or a camping kitchen.\nThe R1T is now available in the United States, with prices starting at $67,500. Also, find out if Rivians are faster than Teslas.\n2- Ford F-150 Lightning\nFord is a well-known brand in the pickup truck industry. The company has also jumped into the electric pickup segment by making the Ford F-150 Lightning.\nIt has standard all-wheel drive thanks to an electric motor and is powered by a basic 98 kWh battery pack, which gives it 426 horsepower and 230 miles of range.\nThere is an option for the larger battery pack of 131 kWh, which gives a peak power output of 563 horses, and the driving range increases to a whopping 320 miles. The inside of the F-150 Lightning is similar to that of the F-150, with just a few important changes, such as an extra-large touchscreen and a big cargo space.\nThe electric pickup has a towing capacity of 10,000 pounds, although that can only be achieved with an additional battery. Standard battery types have a capacity of 7700 lbs.\nThe Ford F-150 Lightning electric pickup truck has a starting price of $41,769.\nThere are also pricier XLT, Lariat, and Platinum trims available.\n3- Tesla Cybertruck\nTesla has designed one of the most distinctive pickup trucks that everyone has got their eyes on. The Cybertruck has an oddly specific shape and a DeLorean-Esque steel exterior.\nIt’s also scratchproof, dent-proof, and supposedly bulletproof.\nNevertheless, Tesla has claimed that the Cybertruck has a towing capacity of up to 14,000 pounds and a driving range of more than 500 miles on a single charge.\nWith these statistics, the Cybertruck will be more competent than any other electric vehicle on the market.\nThe Cybertruck also offers outstanding performance claims, including a zero-to-60-mph time of fewer than three seconds and a flexible suspension providing up to 16 inches of ground clearance.\nTesla is keen on delivering something extraordinary with its electric pickup line. The company focuses on producing a Cybertruck that is more efficient off-road than a Jeep, faster than a Ferrari, and stronger than any of the greatest pickups.\nThe plan was to launch the Cybertruck in 2022, but Tesla pulled the Cybertruck’s production timeline from its website. It is expected to be released in the upcoming years.\nThe Cybertruck will come in three distinct variants, each with a specific number of electric motors, and each motor provides increased towing capacity, faster speed, and a competitive range. The price of the standard Cybertruck is around $40,000.\nRead our article here to learn what people think about Tesla’s Cybertruck.\n4- GMC Hummer\nGeneral Motors’ Hummer brand, which was dropped in 2010, has made a return for 2022. The GM Hummer will be working as a sub-brand in the all-electric segment.\nThe new electric pickup, the GMC Hummer EV, is a powerhouse. It can deliver up to 1000 horsepower from its hefty powertrain and has three electric motors that provide a range of 329 miles per charge. 0-60mph can be reached in only three seconds.\nThe GMC Hummer EV also has detachable top panels, a flexible suspension, and a creative steering mechanism that allows it to move sideways, which means the pickup has the ability to drive diagonally.\nIt can tow up to 7,500 pounds, which is quite less than other competitors on the market, and can provide 100 miles of range in just 11 minutes thanks to its 800-volt battery architecture.\nThe starting price of a GMC Hummer EV pickup is $111,000.\n5- Chevrolet Silverado EV\nFord’s F-150 Lightning shares many parts with its gas-powered variant, and that is what most expect from its electric lineup. However, the Silverado EV is hardly a replica of the Silverado 1500.\nThe Silverado EV has a lot to offer, including a powerful lithium cell battery that provides the electric truck with a range of 400 miles on a single charge.\nIt is also equipped with a dual-motor drive system that produces 780 pound-feet of torque and 664 horsepower. Besides that, it has a payload capacity of 1300 pounds and a towing range of 10,000 pounds.\nThe most distinguishing feature is its bi-directional charging, which allows the truck to charge another electric vehicle if needed. The tailgate also assists in increasing the cargo capacity.\nIt will have WT, Trailboss, and RST trims.\nIt is expected that the sales might begin in 2023 with a starting price of $42,000.\n6- Nikola Badger\nIt is surprising that two electric pickup truck businesses are titled after the great historical physicist Nikola Tesla. Perhaps the most noteworthy thing is that both brands have outstanding electric vehicles on the way in the coming years.\nThe Nikola Badger brand has been in the news for a while but it is ready for an October release this year.\nThe company claims that the Nikola Badger electric pickup will have a range of 600 miles on a single charge, an 8000-pound towing capacity.\nThese statistics are quite promising, and the range can even beat the Tesla Cybertruck. This places the Nikola Badger on top in the electric pickup segment, which may drive competitors to boost the game.\nThe release of this electric truck is not confirmed but the standard variant of the 300-mile range will have a price of around $60,000 and the 600-mile variant will be priced at around $80,000.\n7- Atlis XT\nThe Atlis XT was unveiled in early 2019, following the Rivian in terms of an electric pickup truck.\nDespite not having a functioning product yet, the maker has promised several outstanding features and capabilities.\nAtlis XT will have a four-wheel-drive electric motor system, regenerative braking system, and independent suspension. Moreover, the electric pickup has an active life of one million miles.\nThe range is 500 miles per charge with a maximum speed of 120 mph. The 0-60 time is less than a minute and has a towing capacity of 20,000 pounds.\nHowever, there are other variants that can only go 300 and 400 miles. If Atlis keeps all of its commitments, this might be one of the deadliest electric pickup trucks on the market.\nThe starting price is $45,000 for a 300-mile range, and the 500-mile range would be around $70,000, totally assembled in the United States.\n8- Lordstown Endurance\nLordstown was taking $1000 booking orders for Endurance. The details of the electric pickup truck have already been revealed.\nThe range of the electric pickup will be more than 250 miles with a battery pack of 109 kWh. It also offers a strong towing capacity of around 7500 pounds.\nThe electric pickup is expected to be released in early 2023 with a starting price of $65,500.\n9- Canoo Pickup\nA California-based start-up wowed us in 2019 with its innovative microbus, and now it is ready to impress us with the Canoo pickup.\nThe Canoo pickup has a six-foot truck bed and offers a two-foot extension by pulling it out. There is plenty of storage at the front, which can help in holding tools, and a worktable with electrical connection availability.\nCanoo also claimed that the electric truck would have two variants with dual or rear motors, offering a torque of 600bhp and 500bhp. The cargo capacity would be more than 1800 lbs and the driving range would be 200 miles on a single charge.\nThe first deliveries of the truck are in 2023, and the starting price is around $35,000.\nConsidering the popularity of EVs in the U.S, it’s not surprising that manufacturers are now focusing on electric pickup trucks.\nAlong with generating no pollutants while driving, electric pickups have plenty of torque, which enables them to move loads. Almost all of the electric pickups discussed above take advantage of this to provide exceptional performance and capability.\nElectric pickup motors are also much quieter than traditional diesel and gasoline engines, which contributes to their refinement. Their maintenance and operation are also cheaper.\nAlthough some of these electric pickups are very efficient and some are extremely costly, the variety of electric pickups coming up in the future will meet the budget of many customers.", "label": "Yes"}
+{"text": "Whether or not you have ever personally experienced the excitement and fulfillment associated with community service, ...\nAre you struggling for new ideas? Do your creative batteries feel as flat and lifeless as a skunk in the fast lane? Here are 30 ways to breathe new life into your love of photography and re-energize your inspiration.\nAnother thirty ways to find the inspiration you need to take great photos!\nRead and heed our (tongue-in-cheek) ten commandments of motor oil change and basics!\nThe The Jaguar XF SV8 proves that Jaguar is again capable of producing a car worth lusting after. Just as Ford decide to sell out to the Indians... proves that Jaguar is again capable of producing a car worth lusting after.\nIt's hilarious to look at drawings of what people thought we would be driving.\nRocketing fuel prices have, unsurprisingly, put new emphasis on alternative fuels and improved economy. This is where the Honda Jazz comes in.\nOkay, lets get the obvious \"road test\" stuff out of the way first – the Fiat ...\nTo know who invented the first car you must first define what car is. Some said ...\nEngines Waste Gasoline!", "label": "Yes"}
+{"text": "\"Owner of two Escalades, ESV since 2007. The first, a 2007 which I loved, and a new body 2015 which I hated. I hated it so much I traded it in after 1 1/2 year of suffering for my new 2017 GLS. I love this car!!! I couldn't be happier. Don't waste your money on the Cadillac the Mercedes is by far superior!\"\nPros: \"Finesse and class mixed with power and technology\"\nCons: \"Only 2 usable HVAC vents for the entire rear\"\nLikely to recommend this car? (1-10): 9\n\"My wife and I have owned the 2013 GL450 for 1 year and we both admit that it's the best car that we have ever owned. Quality both inside and outside defines this vehicle. At 75mph the 3 ton gentle beast sails as smooth as a hovercraft over calm water while the cabin is quieter than a whisper. Awesome steering at both low and high speeds. I can't think of a production car that I would feel more safe in.\nNegatives include a complex infotainment system that takes some serious study to take advantage of all the high tech amazing tricks. Also for a car this large, there are only 2 usable HVAC vents that serve the entire 2nd and 3rd row. If you are in the \"wayback\" during the summer, you will be sweating .\nNevertheless if you have the means to afford this vehicle, it is a pure joy to travel the long road.\nOf note, there are hard to find since demand is high and supply is low. Not too many seen on the roads, so it turns many heads and serves as a topic of conversation on the parking lot frequently.\"\nPros: \"Simply a joy to drive with fantastic fuel economy!\"\nCons: \"It has everything that I need in a car!\"\nLikely to recommend this car? (1-10): 10\n\"I have owned the Diesel version for about 3 months now, after trading up from my 98 ML320 SUV with over 190,000 miles. This new \"Truck\" is one of the best cars that I have ever owned (My other car is a 95 S320 with over 250,000 Miles). I am getting over 28mpg on the highway with plenty of torque when needed (it is actually faster to 60mph than my 1968 Porsche 911 Targa). When you are driving it on a trip, it is the kind of car that so enevelops you with security and comfort that you don't want the trip to end. In summary - a fantastic piece of engineering!\"\nCons: \"NAV could use updating for shorter command string\"\nLikely to recommend this car? (1-10): 10\n\"At 6'5\", there are a limited number of vehicles in which I feel comfortable. I have owned mostly GM products over the years due to their superior headroom and prior to buying the GL450, had been in two GMC Yukons for about 13 years. They were good vehicles and held their value well. But, when I decided to step up a notch, what an amazing difference!\nThe electric assist steering and overall ride and handling of the GL450 are significantly superior to the GM SUVs. The GL450 has a more car-like ride, seems to sit a little lower to the ground, has superior headroom, unbelievable power from the bi-turbo V8, and better fuel economy that the 2010 GMC that I previously had.\nThe fit and finish is perfect and the functionality of the 3rd row power seats is the best I have seen in the market. Front seats are extremely supportive, yet comfortable and the visibility is very good in all directions.\nI recently travelled and rented a 2016 Chevy Tahoe (new generation). I would grade it about 3 notches below the MB. I had forgotten how much more the GMC SUVs feel like a \"truck\" and the difference in engine performance.\nImportant note - Most dealers carry GL450s loaded with options, so you see many exclipsing the $90-100K range. if you are patient, you can special order a GL450 and trim some of the very expensive \"fluff\" that you may not want or need and get the price down in the low to mid-$70s (and still get Premium package, large wheels, NAV and H-K sound system. I wanted three months and my $76K version looks, runs, and rides no different than the $100K version. And if you price a new GM, Lexus, or Land Rover product, mid-$70s is actually very price competitive.\"\n\"Bought in Oct 2012. car has constant Vibration. with bunch of other issues such as vibration while braking. Door Latch problem. Cooling system problem, A/C problem. Seat problem, Pre Safe system problem , No Help From MB USA or try to repair the vehicle!\"", "label": "Yes"}
+{"text": "Four Wheel Campers 4WC Eagle Pop Up 0005 Truck Camper\nThe FOUR WHEEL CAMPERS Eagle Model is great camper for the oldest to the newest smaller & mid sized trucks like the Toyota SR5, Tacoma, Nissan Frontier, Dodge Dakota, Ford Ranger, etc. The Eagle Model is only 69″ wide ...\n2015 Four Wheel Campers 4WC Fleet Shell 0007 Teardrop Camper Trailer\nThe FOUR WHEEL CAMPERS Empty Shell Model is the most durable, lightest weight, lowest profile, all welded aluminum \"flex-frame\" pop-up camper in the RV industry.\nThis models allows our customs to ...\nFour Wheel 4WC Fleet Pop Up 0003 Truck Camper\nThe FOUR WHEEL CAMPERS Fleet Model is great camper for the new generation mid sized trucks like The Toyota Tacoma. The Fleet Model is what we sometimes refer to as a “Wide Body Eagle Model”. The Eagle Model is only 69″ wide, and ...\nType of RV: Pop Up Camper\nMake: Forest River\n# of slide-outs: 1\nSleeps how many: 6\nNumber of A/C Units: None\n691996 - Front King Bed, Rear Queen Bed, Slide Out Dinette, Deck Storage w/ Expandable Metal Decking ...", "label": "Yes"}
+{"text": "DVLA: Don’t Buy A Vehicle Without a V5C Logbook\nIf you buy a vehicle that doesn’t have a V5C vehicle registration certificate (log book), you may not be able to tax it.\nDVLA advises motorists not to buy a vehicle if it doesn’t have a V5C (logbook).\nAdvice when buying a vehicle\nIf you buy a vehicle that doesn’t have a V5C vehicle registration certificate (log book), you may not be able to tax it. You’ll need to apply for a V5C logbook using a V62 application which can take 6 weeks and costs £25.\nYou can reduce the risk of buying a stolen vehicle by making sure it has a V5C logbook and by following these steps.\nOnce you’ve bought a vehicle, you’ll need to tax it before using it on the road as vehicle tax cannot be transferred between keepers. Find out how you can tax your vehicle without a V11 reminder letter.\nSelling a vehicle\nIf you’re selling your vehicle, make sure that you tell DVLA immediately either online or by sending the V5C logbook to DVLA. If it’s lost or damaged you’ll need to get a replacement before selling. The new keeper won’t be able to tax the vehicle without it.\nVehicle tax refund\nOnce you tell DVLA that you’ve sold the vehicle you’ll receive an automatic refund for any full months remaining tax and if you have a Direct Debit set up it will be cancelled.", "label": "Yes"}
+{"text": "900 RWHP Dodge SRT8 Challenger by RDP Motorsport USA by steven leerentveld\nSRT8 Dodge Challenger on the Dyno after getting a full mechanical upgrade by RDP Motorsport USA running a Blown 440cui Motor by steven leerentveld\n2018 Dodge Challenger SRT Demon 840HP W/ Vin Diesel\nLIKE our Facebook Fan Page NOW https://www.facebook.com/Automoho FOLLOW US ON INSTAGRAM http://www.instagram.com/automoho 2018 Dodge Challenger SRT Demon 840HP - THIS IS THE WORLD FASTEST CAR. 0-60 in 2.3 Seconds. The Dodge Challenger SRT Demon pushes out 840 horsepower and 770 pound-feet of torque. It'll hit 60 mph in 2.3 seconds, 100 mph in 5.1 seconds and blitz the quarter-mile lights in 9.65 seconds at 140 mph. Let us know what you guys think below. Hope you guys enjoy! New videos coming every week. ===THUMBS UP & SUBSCRIBE=== ==WANT TO SEE A CAR YOU LIKE?? COMMENT BELOW AND ILL TRY MY BEST TO FILM IT==\n2013 Dodge Challenger SRT8 - Supercharged HPE600 Hennessey - Dyno Test\nRan 570hp on First Dyno, 574hp on Final test - Bradenton, FL Dyno Showdown\n1600hp!! Dodge Challenger Dyno Run [Australia]\nIf you are looking to buy any vintage motorcycles or cars be sure to check out RobzRidez at http://www.robzridez.com.au/ We're we have a huge range of vintage motorcycles and cars imported from the United States, We also are able to ship any cars or motorcycles for you, Direct from the states to Australia!!", "label": "Yes"}
+{"text": "Owner Says: Needs smog pulley put on\nOwner Says: Antique truck\nOwner Says: Needs head liner put up,needs new heater coil put in .\nOwner Says: Small tears driver seat and console\nOwner Says: Low miles, strong engine and transmission. Legal SunTek window tint with warranty, cold a/c and hot heat, new Pioneer touch screen audio, 20’ Modern Luxury wheels and tires with less than 10k miles ...more\nOwner Says: one owner ,,low low milage,pearl white.gently used car perfect for city use as a second car,,was garaged and in excellent condition,premium package which includesaround view monitor,bose 7 speaker ...more\nOwner Says: Car is drivable. It is actually fun to drive. The oil light comes on and dings when you stop but goes off while you are driving. I think it's probably an easy fix. I just had a new thermostat and ...more\nOwner Says: New brakes new radiator new gass tank new traits runs and drives good.\nOwner Says: Excellent condition, Low Low actual miles.no damage, no rust, clean title sell cash or certified check only\nOwner Says: Classic 2005 Mazda 3. One owner, well maintained. Manual tranny; good reliable transportation. Great for kids and kids at heart. Clean with a few blemishes. No crash or flood. Mazda no longer ...more\nOwner Says: Garage kept, weather-tech mats, Avs window shades,\nOwner Says: I'm wanting to trade my Lincoln Luxury Avatar fully loaded SUV for a smaller car of equal value (3,800) or cash with trade. Runs great, clear Title\nOwner Says: If have questions please contact me\nOwner Says: I have my 2008 VW Jetta for sell. Car has been well maintained and is very reliable. Here's the list of what's been replaced. Clutch alternator battery struts four-wheel laser alignment three vacuum ...more\nOwner Says: It’s run great good transportation. It has a dent on the left quarter pound can fix cheap.\nAt Best Car Finder, we are dedicated to helping you find your perfect used car. Our robust and quick-and-easy search feature enables you to effortlessly explore a wide selection of vehicles for sale by owners and car dealers. By meticulously analyzing millions of current and historic listings, we determine the best deal score for each vehicle, ensuring that you discover the most incredible car deals near you. Trust us to be your partner in finding the ideal car at the best possible price.\nExperience the freedom of selling your car online with BestCarFinder, where you can list your vehicle for free. Our platform offers a seamless and cost-free way to reach a wide audience of potential buyers. Start selling your car today!", "label": "Yes"}
+{"text": "Your vehicle deserves only genuine OEM Mopar parts and accessories. To ensure reliability, purchase Mopar part # 5091100AB ANTENNA-ANTENNA . It is sometimes referred to as Mopar Antenna, Mopar Antenna Mast Our Mopar parts and accessories are expedited directly from authorized Mopar dealers strategically located all across the U.S. and are backed by the manufacturer's 12 month, 12,000 mile warranty. OEM Mopar parts are the best for restoring your vehicle to factory condition performance. This part fits specific Dodge Dart, Journey models.\nAffordable, reliable and built to last, Mopar part # 5091100AB ANTENNA-ANTENNA stands out as the smart option. Mopar Parts Giant is your prime online source with the biggest and best selection of genuine Mopar parts and accessories at giant discounted prices. We have the OEM Mopar parts and accessories you need at the lowest possible prices. Mopar Parts Giant has you covered no matter what type of Mopar vehicle you drive.\nMopar Part No.:5091100AB\n- Part DescriptionMAST Antenna\n- Replaced By68297936AA\n- ManufacturerMopar. This genuine Mopar part is guaranteed by Mopar's factory warranty.\n- MakeModelYearEngineImportant vehicle option details\n- DodgeDart2012-20134 Cyl 1.4L, 4 Cyl 2.0L, 4 Cyl 2.4LLimited, SE, SXT\n- DodgeJourney2016-2017, 20134 Cyl 2.4L, 6 Cyl 3.6LCrew AWD, Crew FWD, Crossroad AWD, Crossroad FWD, GT AWD, GT FWD, R/T AWD, R/T FWD, R/T Rallye AWD, SE AWD, SE FWD, SXT AWD, SXT FWD\n- JeepCherokee2014-20174 Cyl 2.4L, 6 Cyl 3.2LLatitude AWD, Latitude FWD, Limited AWD, Limited FWD, Overland AWD, Overland FWD, Sport AWD, Sport FWD, Trailhawk AWD\nAttention State of California Customers\nWarning: Cancer and reproductive harm - www.P65Warnings.ca.gov", "label": "Yes"}
+{"text": "You have no items in your shopping cart.\nHaving spent over a year in development and testing, LUX Angel Eyes is proud to announce the LUX H8 Version 4 angel eyes. These one of a kind angel eyes features a Color Adjustment that will allow you to change the light color from a neutral white 5000K to a cool blue 12,000K Color. There are 9 pre-set color settings that are adjustable by small switches on the power supply.\nThe LUX H8 V4 angel eyes use 8 of the newest Cree LED’s to offers unmatched brightness while its patented pending design makes both the inner and outer angel eyes as bright as possible. The new patented pending heatsink has a single flat side which correlates with the connector side of a standard H8 bulb, allowing for easier orientation when installing. All LUX Products come with our guaranteed customer support and a 1-year warranty.\n- 9 color settings from 5,000K – 12,000K\n- 100% no Dimming in all headlight modes\n- No flickering on Self Check Sequence\n- Fully Fused and No EMI\n- New Heatsink design for Much easier installation\n- Overall significantly brighter than the LUX H8 V3\n- US Patent Pending\n- 1 Year Warranty\n2008+ BMW E82 1-Series & 1M\n2007-2010 BMW E92/E93 3-Series (Pre-LCI Coupe & Convertible Only; Pre-March 2007 Cars are Not Compatible)\n2010-2012 BMW E90 3-Series (LCI Sedan Only)\n2008-2013 BMW E9X M3 (Coupe, Convertible & Sedan)\n2008-2010 BMW E60/E61 5-Series & M5\n2010-2012 BMW E84 X1\n2007-2012 BMW E70 X5 & X5M\n2009-2012 BMW E71 X6 & X6M\n2009-2013 BMW E89 Z4", "label": "Yes"}
+{"text": "UAW Local 1413890 Martin Rd SW\nHuntsville, AL 35824, USA\nLocal News for UAW Local 1413\nURS Corporation recently received an indefinite delivery/indefinite quantity, multiple award contract from the U.S. Army Engineering and Support Center, Huntsville, Ala.\nRare Gathering of Car Owners, Dealers, Marketers & Retailers to Converge at Mercedes-Benz U.S. Production FacilityWed, 15 May 2013 07:17:00 -0700\nTUSCALOOSA, Ala., May 15, 2013 /PRNewswire-USNewswire/ -- The Mercedes-Benz Club of America (MBCA) — the largest Mercedes-Benz enthusiast organization in the world — is ready to welcome Mercedes-Benz car owners, dealers, marketers and retailers from across North America May 18-22 for \"StarTech 2013,\" MBCA's national technical convention to be held at the Mercedes-Benz US International (MBUSI ...", "label": "Yes"}
+{"text": "The most powerful Twin-Cooled V-Twin engine ever offered from the H-D factory, and only available in CVO™ models. 2020 CVO Limited Specifications, Model Information, and Photos Regarding the chassis characteristics, responsible for road holding, handling behaviour and ride confort, the Harley-Davidson CVO Limited have a frame with front suspension being Telescopic fork and in the rear suspension it is equiped with Twin shocks . Our reviews are hands-on, detailed, and unbiased. The 117 engine is mated to a six-speed manual transmission and it makes 125 lb-ft of torque. We miss 2 votes to … The premium hot rod bagger look is complete with Front 19-inch and Rear 18-inch wheels finished in Gloss Black/Satin. Hydraulic Disc. Electronic Sequential Port Fuel Injection (ESPFI), Sand Dune, Smoky Gray and Stormcloud, and Moonlight Blue and Deep Sea Blue. Check your bike’s vitals including fuel level, get tamper alerts and stolen-vehicle tracking, and more. Dual bending valve front suspension and emulsion rear suspension with hand-adjustable pre-load put you in control of a plush ride. In this version sold from year 2020 , the dry weight is 411.0 kg (906.0 pounds) and it is equiped with a V2, four-stroke motor. ABS, 4-piston size at the rear. The 2020 Harley Davidson CVO, Limited Edition: An Introduction Harley Davidson calls their CVO Limited bikes the “Ultimate in Grand American Touring.” These super-premium bikes are built to be powerful … Full-on custom treatment from fender to fender. , 2020 CVO™ Limited, Moonlight Blue & Deep Sea Blue. Click here to rate it. Smoky Gray & Stormcloud UVP + 1.490 €. 2020 CVO ™ Limited. Moonlight Blue & Deep Sea Blue. Your email address will not be published. The most-advanced headlamp system ever developed for a Harley-Davidson motorcycle. Electronic Sequential Port Fuel Injection, Engine size - Displacement - Engine capacity, 169.50 Nm (17.3 kgf-m or 125.0 ft.lbs) @ 3500 RPM, Multi-plate with diaphragm spring in oil bath, Recuperation 60 to 140 km/h in highest gear, Fuel Consumption - MPG - Economy - Efficiency, 5.74 litres/100 km (17.4 km/l or 40.98 mpg), 133.2 CO2 g/km. - Torque (Ft Lbs) 125. Front Brakes Dimensions - Disc Dimensions, Injection. For informational use only. Pictures. The CVO Street Glide is the kind of bike you get if you love the Harley-Davidson brand and you want the absolute best touring machine the company has to offer. Limited. $44,039. It’s an air-cooled V-twin that has a displacement of 1,917cc. Stock tire sizes are 130/80-B17 on the front, and 180/65-B16 on the rear. You get custom seat covers and stitching, a heavy breather air cleaner with two paint treatments, billet fairing mount mirrors—the list goes on. wBW provides subjective opinions and information on hard-to-find and unique motorcycling products. Your email address will not be published. The CVO Limited is the best touring machine in the HD lineup and it has a price tag that reflects it. Average Retail. See the webBikeWorld Site Info page. In this version sold from year 2020 , the dry weight is 411.0 kg … ... Popular Specs … As for stopping power, the Harley-Davidson CVO Limited braking system includes Double disc. so you can read up on the new Harley-Davidson CVO Limited in one place. It takes all that Harley knows about building a touring motorcycle and rolls it into one impressive machine that has all of the features and creature comforts you and a passenger could want out on the road. Every element is optimized to enhance the rider’s interaction with the bike and connectivity with the world. The Boom!™ Audio 30K Bluetooth headset lets you call hands-free on your Bluetooth mobile phone, listen to stereo music or voice instructions of GPS navigation and have intercom conversations with your passenger or fellow riders. Specifications. You’re In The Right Place. It takes all that Harley knows about building a touring motorcycle and rolls it into one impressive machine that has all of the features and creature comforts you and a passenger could want out on the road. An evolved interface experience that offers a contemporary look, feel and function, with exceptional durability and features designed specifically for motorcycling. Fuel Capacity (l) 22.7. All rights reserved. Contact US. Harley-Davidson CVO Limited: Year: 2020: Category: Touring: Price as new: US$ 44039. The 2020 Harley-Davidson CVO Limited is the ultimate touring machine. (CO2 - Carbon dioxide emission), High beam, running lights, front fender running lights, directional light bar, low oil pressure, engine diagnostics, cruise control, speakers, accessory, security system, 6-speed, low fuel warning, ABS. The engine produces a maximum peak output power of 105.00 HP (76.6 kW)) @ 5250 RPM and a maximum torque of 169.50 Nm (17.3 kgf-m or 125.0 ft.lbs) @ 3500 RPM . All material and photographs are Copyright © webWorld International, LLC since 2000. 2020 CVO. Values Specifications Special Notes. Specifications. By continuing to use this site you agree to these cookies. About - MSRP depend on country, taxes, accessories, etc. He lives in Indianapolis, Indiana, and tries not to let the cold winter months get him down too much. With this drive-train, the Harley-Davidson CVO Limited is capable of reaching a maximum top speed of . Discussions. Pricing. Dual Hydraulic Disc. In-depth guides to help riders understand what to look for, how to weigh options and make good buying decisions. 41 MPG Combined. Sand Dune. On this page: we’ve curated specs, features, news, photos/videos, etc. Fuel Economy. 2020 CVO Limited Specifications Spec, Photos, and Model Information / ‹ / › Start Price.\nKillen's Heights Pop-up, Bertolli Four Cheese Rosa, How To Change Circuit Board On Garage Door Opener, St Lucie Florida, Tahini Dressing Carbs, Paneer Tikka Sticks Price, Ghost Pepper Salsa, Kaali Venkat Movies,", "label": "Yes"}
+{"text": "Xiaomi to unveil EV prototype this August\nXiaomi invests heavily on the production and launch of an EV prototype next month\nNext-gen Ford Ranger Raptor spotted in Thailand\nAfter being sighted in the US, the all-new Ranger Raptor has been spotted recently in Thailand\nHonda Civic Type R Prototype heading to 2022 Tokyo Auto Salon\nFrom track testing in Suzuki, next-gen Honda Civic Type R Prototype to make show debut at Tokyo Auto Salon next month.\nIs Toyota working on Fortuner with GR Sport kit?\nIt looks like the Toyota Fortuner will receive the GR Sport treatment\nToyota wants to build a high tech city near Mt. Fuji\nToyota envisions a high-tech, fully-connected ecosystem in soon-to-rise Woven City\nSubaru dresses up Levorg Prototype with STI Sport goodies\nSubaru teases 2020 Levorg STI Sport Prototype prior to 2020 Tokyo Auto Salon debut\nNissan’s \"Super Leaf\" prototype feels like an electric GT-R\nDo you think EVs like the Leaf are boring? Nissan wants to change that.\nJapan has successfully built and tested a flying car\nFlying cars are just around the corner as NEC Corp's prototype completed its first short test flight in Japan", "label": "Yes"}
+{"text": "I really don't want to ask this question, but how do you tell which hole on the turbo is for what. From what I have found, want to make sure on the heart of the car, but the oil inlet is on top and outlet on bottom. Then for the water, the inlet is slightly lower than the outlet? Some helpful info would be great. Thanks in advance! Turbo is a Garrett GTX3067R\nGoogled Turbo Diagram, this one seems relevant, not for a Garrett it appears, but /should/ apply.", "label": "Yes"}
+{"text": "1. Acura NSX Concept\nThe world has been waiting almost a decade for it’s return, and so there’s little doubt that Acura’s new NSX concept is number one on our list of cars from this year’s Detroit Auto Show. The new NSX will, however, be quite different from the old model. Sure it will retain a mid-mounted V6 engine, but it will also be a hybrid, and use all-wheel drive – an innovative new electric version of the brand’s Super Handling AWD system that allows power to be distributed individually to the left and right sides of the rear axle.\nWhile past NSX concepts never made it to the street, Honda is serious about this car and has committed to having a production version on the street in the next three years.", "label": "Yes"}
+{"text": "Find best solution for your needs with advisory team\nOptimize your fleet with Connect Fleet\nThe way you use your fleet has an enormous impact on the performance of your vehicles. Built for fleets of all sizes, Connect Fleet allows you to take advantage of real-time data and insights into your vehicles, drivers, fuel savings and overall productivity.\nBuild your fleet with mobility solutions\nWhether you need to build or enhance your fleet, our solutions are here to support your operations.\nFrom minutes To days\nFrom days To to weeks\nMonth-to-month with no commitment\nAccess our free-floating cars\nGas, insurance and street parking in home zones included\nCentralized billing on company card\nA vehicle in less than 24h\nUp to 3 drivers\nDedicated call center\nMonthly car subscription\nDirect company billing\nAll inclusive: Maintenance and roadside assistance\nWe are a global mobility company, brand of Stellantis. Our mission is to deliver seamless and sustainable mobility through the best user experience. We are here to help you build and adjust your fleet and support you during the transition towards more sustainable mobility.", "label": "Yes"}
+{"text": "Caterpillar 246C, 256C, 262C, 262C2, 272C Skid Steer Loaders Service Manual on CD The Cat 262D Skid Steer Loader, with its vertical lift design, delivers extended reach and lift height for quick and easy truck loading.\nIts stability and lifting performance provides excellent material handling. Find great deals on eBay for caterpillar 262c manual. Shop with confidence.\n262C Series 2 Cat C3. 4 DIT Diesel Engine and diagnostic service codes. This display also provides the user interface for the optional AccuGrade Grade Control System. The standard quick coupler features manual engagement and disengagement of work tools using two high leverage handles.\nThe optional hydraulic For service repairs, adjustments, and maintenance, always refer to the Operation and Maintenance Manual, Service Manuals, and other related service publications. SERV 0708 86 User manual CATERPILLAR 262C BROCHURE. Lastmanuals offers a socially driven service of sharing, storing and searching manuals related to use of hardware and software: user guide, owner's manual, quick start guide, technical datasheets 246C, 256C, 262C, 272C Skid Steer Loaders 246C 256C 262C 272C Cat C3.\n4 DIT Diesel Engine Net Power (SAE J1349) 54 kW (73 hp) 61 kW (82 hp) 61 kW (82 hp) 67 kW (90 hp) Superior Dealer Service Your Cat dealer is ready to assist you with your purchase decision and everything after.\nCaterpillar offers parts manuals, operation& maintenance manuals and service manuals. Parts Manuals contain detailed exploded views and part numbers of all serviced parts for Cat products.\nThese manuals give the information needed to quickly identify and order genuine Cat parts to keep your PDF Spare parts catalogs, Service& Operation Manuals. Spare Parts Catalog, Operation and Maintenance Manual, Special Instructions, Technical Information Bulletins.\nAdditional technical information for repair. FTK Caterpillar 262C SKID STEER LOADER MST Service (workshop) Manuals, Spare Parts Catalog, Operation and Maintenance Number cat. Model. Name manual. Compact track loader. CAT: 259B3: Compact track loader Caterpillar 259B3 Spare parts catalog Skid steer loader Caterpillar 262B Service manual: CAT: 262C: Skid steer loader Caterpillar 262C Spare parts catalog: CAT: 262C: Skid steer loader Caterpillar 262C Operation and maintenance manual All manuals are brand new and serial number specific to your exact machine.\nPlease complete the contact form with your machine's serial number and one of Official OEM Caterpillar factory service repair shop manuals, parts books, and operator manuals for sale for all Cat engines and machines.", "label": "Yes"}
+{"text": "Improve Vehicle Shine, Health With Tools Of The Trade\nKeep your shine this spring by finding the right tools and products for the job. There are a wide variety of tools from a long list of car care specialists.\nProper tools help you clean your vehicle efficiently while avoiding damage to vehicle surfaces. Car care experts recommend tools specifically designed for vehicle surfaces rather than household items, which can cause permanent scratches and discoloration.\nThe variety of surfaces inside your vehicle call for a variety of tools to simplify the job.\nNon-abrasive microfiber towels and small foam brushes help clean those hard-to-reach edges and crevices. They also make it easy to apply and buff interior products such as sprays, foams and paste.\nOn leather products, start by using a vacuum on surfaces to remove heavy particles and then apply a foam-based product. Make sure the vacuum hoses are clean to avoid transferring contaminants into your vehicle cabin.\nUse a soft bristle brush and upholstery cleaner to loosen food, sap and other contaminants. Wipe surfaces down with a clean microfiber towel to remove excess cleaning agents.\nAll home car care enthusiasts need three basic tools of the trade: two buckets and wash mitt.\nFill one bucket with plain water and the other with your car wash solution.\nFollow the dip-rinse procedure. Soak the wash mitt in the wash solution and apply it to the vehicle. Then rinse it out in the plain water.\nDip, then rinse. Dip, rinse again.\nIdeally, wash your vehicle from the top to the bottom, leaving the trunk for last.\nDon’t allow water to sit for too long on the surface without drying, because this can result in hard-water spots. Set aside three or four absorbent, waffle weave microfiber towels for drying. Or consider the all-purpose chamois–a good choice that is gentle on vehicle surfaces.\nOne note of caution: Do not use your wash mitt to clean wheels and tires. Abrasive contaminants on wheels and tires can ruin vehicle surfaces.\nTo finish off the exterior, remove any embedded dirt with a clay bar, which usually comes in a kit with a quick detailing solution. Some people like to rinse or wash their car after using a clay bar.\nTires and Wheels\nThe nooks and crannies of modern wheels make cleaning them a chore. Enter wheel and tire brushes.\nYou may work with the same cleaning solution and buckets from the car exterior. Tools and towels used for cleaning wheels and tires should not be used for other vehicle surfaces, however.\nWheels and tires contain abrasive contaminants that can destroy painted surfaces. Wash wheels and tires last to avoid transferring contaminated water to other vehicle surfaces.\nBristles on wheel brushes are designed to clean without scratching surfaces. They also are easy to clean and handle.\nFor tires, specially designed foam pads remove build-up of blooming–the brown haze that makes tires look old and dull. There’s good news: You can return tires to a beautiful luster with tire brushes.\nTire tools are gentle enough not to scar the rubber sidewall but rough enough to remove browning.\nGlass and chrome cleaning\nNo need for specialized tools on glass and chrome surfaces.\nThe all-purpose microfiber towels work well. A note of caution: Make sure to read product directions before applying to surfaces.\nThe right tools and products make washing your vehicle easier in the future. Here is our list of essential car washing tools, products, and equipment:\n- Two buckets, one for rinsing and one for wash solution.\n- Non-abrasive waffle weave microfiber towels. These are an inexpensive must for car care at home. They can be used for washing, drying and buffing.\n- Small foam brushes for interior vents, seems and tough to reach places.\n- Soft bristle brush for wheels. Get a product specifically designed to reach the nooks and crannies of modern wheels.\n- Wheel cleaning pads to removing blooming haze. These types of brushes are gentle on rubber but have a rough surface that works effectively.\n- Vacuum. Any home vacuum will do; just make sure the nozzles are clean to prevent transferring home contaminants into your vehicle cabin.", "label": "Yes"}
+{"text": "Agency: Department of the Army Office: FedBid Location: FedBid.com -- for Department of Army procurements only Date you need to respond by: 22-July-2014 Classification Code: 60 -- Fiber optics materials, components, assemblies & accessories ... ITbriefing, 1 week ago\n) Plasma TV, a new mobile production provider, has launched its services in Mendoza, Argentina. Their first truck has debuted equipped with five Ikegami HDK-95C Full Digital HDTV portable CMOS camera systems. Founded by Gustavo and Maximiliano ...Creative Cow, 1 month ago\n2014 Honda CRF450R | Motocross Race Test In the past two years, the Honda CRF450R has undergone a slew of changes in its design, bodywork, and ergonomics. Last year's Honda CRF450R marked a new generation for the brand, featuring a new Kayaba ...Ultimate Motorcycling, 1 month ago 2015 Honda CRF450R Bikesales.com.au, 1 month ago 2015 Honda CRF250R Brings a New Frame and Three Engine Mappings [Photo Gallery] Auto Evolution, 1 month ago 2015 Honda CRF250R Mcnews.com.au, 1 month ago\n2015 HONDA CRF250R Press release date: Tuesday 3rd June, 09:00 CET: Model updates: Honda's MX2 machine receives 48mm Showa USD air forks, new rear mufflers and the same Engine Mode Select Button as the CRF450R with choice of three engine ...European Motor News, 1 month ago\non your WebpageAdd Widget >Get your members hooked!", "label": "Yes"}
+{"text": "Well-liked Mechanics; Michael Schäfer\nIndividuals have been having fun with the artwork of the automotive—every part from how they’re made, to how they give the impression of being, to what’s beneath the hood—for the reason that invention of the primary car. (Whether or not you take into account that to be Leonardo da Vinci, Henry Ford, or Karl Benz is one other story for one more day.)\n➡ You like badass vehicles. So can we. Let’s nerd out over them collectively.\nSince our love of previous fashions, new improvements, and futuristic ideas runs deep, we’ve compiled the definitive checklist of the good vehicles to ever hit the pavement. The one arduous requirement for making the minimize? Not less than one totally drivable mannequin needed to have really been created.\nAcquired a necessity for velocity? Scratch that itch proper right here. 👇\nCommercial – Proceed Studying Beneath\nThis $298K beast is ideal for the basic automotive fanatic who loves trendy options and has a ton of disposable money they’re itching to spend.\nDive Deep: Lengthy Reside the Mustangs’ V8s\nThis modern iteration of Mustang’s iconic Shelby is comprised of a carbon fiber physique and is available in a restricted run of 25 vehicles. Car experiences that this new mannequin is about 600 kilos lighter than the usual GT500CR and is highly effective with a “claimed” 810 hp engine.\nBentley EXP 100 GT (2019)\nThis electrical idea automotive is gorgeous and was designed to discover “how grand touring may look in 2035,” in response to Bentley. The inside of the EXP 100 GT appears like an expensive spaceship—to be sincere, the entire automotive appears otherworldly—and is predicted to ship every part from autonomous driving to using using AI to learn your biometrics and alter cabin temperature. That is all along with options like “air curation,” which brings in fragrances “from the pure world whereas protecting metropolis air pollution out.” Fancy.\nThe Chiron is available in 4 totally different fashions (the Sport, Pur Sport, Sport 110 Ans, and the Tremendous Sport 300+) and begins at a cool $3 million.\nWhoa: Lego Constructed a Working Bugatti Chiron Out of Lego Technic\nBugatti designed it to be a velocity demon by outfitting it with “clever air consumption administration to enhance aerodynamics” along with serving to improve “the cooling effectivity for engine and brakes.” Translation: it goes quick—250+ mph quick.\nJaguar XJS (1975–1996)\nChevrolet Camaro (1966–1969)\nThe unique Camaro set many younger hearts aflutter. With muscular, purposeful styling and energy to spare, the ’60s Camaro grew to become an immediate basic.\nLotus Esprit (1993–2004)\nThe reincarnation of the Ford GT40 was so cool that it is one of many solely vehicles of the previous 10 years that hasn’t depreciated—actually, it is price extra now.\nEverything of ’50s automotive vogue in America can virtually be summed up within the ’59 Cadillac. Big, heavy, and comically over-styled, it’s a basic from a bygone period—and extremely fascinating in at this time’s collector market.\nBugatti Sort 57 (1934–1940)\nShortly earlier than World Warfare II reached a fever pitch, French maker Bugatti loved appreciable recognition for its beautiful Sort 57. A complete of 710 had been in the end produced.\nNoble M12 M400 (2004–2007)\nYou could by no means have heard of Noble—it’s not an enormous title. Its M12 sports activities automotive, nonetheless, was an enormous performer, and a favourite amongst track-day fanatics.\nDodge Viper (1990–current)\nIf macho may be attractive, then the Dodge Viper has attraction to spare. Designed to be brutally quick, uncomplicated, and crowd pleasing, this low-tech famous person from Detroit hit immediate fame.\nMercedes-Benz 540K (1935–1940)\nThe 540K marked a definite change in type from its predecessor, the 500K. The brand new mannequin featured sleeker and curvier bodywork, together with a bigger, extra highly effective straight-8 engine.\nDive Deep: Mercedes-Benz Places the Car on Autopilot\nFord Boss 302 Mustang (1969–1970)\nAfraid of dropping its “pony automotive” crown to the archrival Chevy Camaro, Ford created the Boss 302 variant of the perennially standard Mustang to underscore the significance of reputable efficiency over most energy.\nVolvo P1800 (1961–1973)\nSure, it’s true: Volvo as soon as made a horny sports activities automotive. The P1800 was Volvo’s profitable try to get well from its earlier P1900 sports activities automotive, which had failed miserably.\nVolkswagen Karmann Ghia (1955–1974)\nThe Karmann Ghia was a surprisingly standard experiment for VW. The sporty coupe was constructed largely from the present Beetle mannequin, however featured bodywork by Italian designer Ghia and German coachbuilder Karmann.\nFerrari 360 Modena (1999–2005)\nThe 360 Modena changed the getting older 355 as Ferrari’s bread and butter mid-engine sports activities automotive, bearing a free-breathing V-8 and crowd pleasing appears.\nNissan GT-R (2009–Current)\nThe GT-R is an automotive marvel not just for its appears, but additionally for its uncanny potential to make use of excessive expertise to disgrace unique supercars that price many occasions as a lot because the Nissan.\nChevrolet Corvette (1953-1962)\nThe primary technology Corvette is probably the most important American automotive ever created. Its stunningly authentic design and spectacular efficiency, to not point out its potent fuel-injected engines, proved as soon as and for all that America may compete within the sports activities automotive area.\nAlfa Romeo Spider (1966–1969)\nWhereas the Spider has advanced by varied iterations over time, it’s the unique “Collection 1” technology of the ’60s, well-known from the film The Graduate, that tugs the heartstrings of fanatics.\nPorsche Carrera GT (2004-2007)\nLamborghini Diablo (1990–2001)\nThe Diablo succeeded the well-known Countach, and options much more wild velocity and impracticality than its predecessor. Fortunately, its design has carried out a greater job standing the check of time.\nHudson Hornet (1951–1954)\nHudson is certainly one of Detroit’s lesser-known producers. Its Hornet mannequin, nonetheless, epitomizes “bathtub” styling and holds a spot in historical past for its important position in stock-car racing.\nFord Thunderbird (1955–1957)\nA real basic by any requirements. The unique T-Hen was a response to Chevy’s Corvette, and oozes ’50s diners and drive-ins type from each angle.\nLamborghini Reventon (2009–2010)\nRestricted to simply 20 manufacturing vehicles offered to the general public, the Reventon rePresents the way forward for Lamborghini design. Its type, each inside and outside, is impressed by stealth navy jets.\nAustin-Healey 3000 (1959–1967)\nThe Austin-Healey 3000 is a contact bigger and heavier than different British roadsters of its day. By at this time’s normal, although, it’s nonetheless a compact featherweight.\nHonda S2000 (1999–2009)\nWith large dealing with, attractively chiseled traces and a howling 9000-rpm engine sending chills down spines, the S2000 was the final word expression of turn-of-the-century Honda tech.\nLotus Elise (2005-2011)\nTiny, light-weight, quick, and nimble. The Elise, together with its extra hardcore, track-oriented Exige sibling, defines what Lotus is all about: a connection between driver and street.\nFerrari F40 (1987–1992)\nThe hallowed F40 is an icon of automotive enthusiasm. With its terrifyingly turbocharged V-8, it was the primary manufacturing automotive ever to cross the 200 mph barrier.\nSS Automobiles SS100 (1936–1940)\nThis long-hooded magnificence is an icon of ’30s automotive styling. SS Automobiles later grew to become referred to as Jaguar.\nTriumph Spitfire (1962–1980)\nThe Spitfire was the quintessential British roadster: handsome and light-weight, completely enjoyable to drive—and a complete headache to take care of.\nTalbot-Lago T150 CSS (1938)\nAlso referred to as the teardrop, the CSS was a profitable racer from the ’30s and featured a jaw-droppingly glossy design that turns heads 70 years later.\nLincoln Continental (1961–1969)\nThe big Continental of the ’60s helped to convey concerning the finish of the gaudy, overstyled American vehicles of the ’50s. The 1965 mannequin 12 months is a selected favourite amongst fanatics.\nAlfa Romeo 4C (2015-present)\nAlfa’s carbon-tubbed two-seater appears prefer it prices 4 occasions its mid-$50,000 base value.\nNissan Fairlady Z (1969–1973)\nExtra generally referred to as the Datsun 240Z, the unique Z automotive was arguably a very powerful automotive in Japan’s historical past. It proved as soon as and for all that the nation may compete within the worldwide auto market.\nFerrari Testarossa (1984–1996)\nAsk a layman to image a Ferrari and the Testarossa is probably going what involves thoughts. The boxer 12-cylinder engine and unmistakable look make the Testarossa nonetheless the definitive Ferrari.\nTriumph TR6 (1969–1976)\nBarely old style in design, the TR6 is among the most beloved examples of England’s automotive specialty, the roadster.\nLexus LFA (2010–2012)\nWith a screaming V-10 engine and oodles of carbon fiber, the LFA is a critically fascinating supercar, and its Nurburgring variant holds one of many quickest manufacturing automotive lap occasions on the well-known German monitor.\nMorgan Plus 4 (1950–1961)\nConventional type blended with extra trendy ideas of dimension and weight, the Plus 4 was a beautiful possibility on the English auto market. It will definitely shared an engine with the Triumph TR3.\nLamborghini Huracan (2014-present)\nAston Martin DB6 (1965–1971)\nThe DB6’s predecessor, the beautiful DB5, was a tricky act to comply with. Whereas it didn’t fairly obtain the identical attract (DB5 is larger on our checklist), the DB6 was a technical enchancment in all features—and nonetheless fairly sufficient to make the highest 100.\nDeep Dive: The Motion-Packed Historical past of the James Bond’s Aston Martin\nLotus Elite (1958–1963)\nThe unique Lotus Elite set the method for all Lotuses to comply with. It was extraordinarily light-weight (roughly 1100 lbs), permitting it to profit from its small, 1.2-liter engine.\nLamborghini Aventador (2011–Current)\nThe most recent Lamborghini flagship supercar is an apparent evolution of the mighty Murcielago that preceded it.\nNo Manner:I Took a Highway Journey in a Supercar\nAs anticipated, packs an unlimited quantity of energy and flashy type.\nBMW 3.0CSL (1972–1975)\nPorsche 356 (1954–1965)\nMazda RX7 (1993–1995)\nFerrari F50 (1995–1997)\nThough overshadowed by the enduring F40 that got here earlier than, the F50 was a extra curvaceous and delightful unique, and packed a screaming V-12 in lieu of the turbocharged V-8. Solely 349 had been ever produced.\nKoenigsegg Agera (2011–Current)\nThe Swedish outfit Koenigsegg makes a speciality of ultra-high-performance sports activities vehicles. Its newest creation, the Agera, takes efficiency to almost unbelievable ranges.\nTriumph GT6 (1966–1973)\nEnglish automaker Triumph could also be higher identified for its conventional roadsters, but it surely produced the sharp GT6 sports activities coupe from the chassis of its Spitfire convertible.\nAudi R8 (2006–Current)\nIt was solely a matter of time earlier than Audi produced a supercar of its personal, and when it lastly appeared, the R8 was universally adored with potent engines and a singular look.\nThe MGA marked a brand new period for MG. With a contemporary, light-weight design and enticing physique, the roadster was a direct success, with over 100,000 in the end being produced.\nHonda NSX (1990–2005)\nThe NSX was a massively essential automotive for its time, proving that the supercar was able to rise from the sketchy exotics of the ’80s to glossy, sensible new heights.\nBugatti Veyron (2005–2011)\nIt took practically 15 years for a automotive to wrest the final word road-going efficiency title from the McLaren F1, so when the Veyron did it, the entire world took discover. In SS trim, the Veyron hits an absurd prime velocity of practically 268 mph.\nRUF CTR “Yellow Hen” (1987)\nAustin-Healey 100 (1956–1959)\nThe 100 is an ideal instance of how British producers had been reinvigorated after World Warfare II lastly ended. This Austin-Healey received its title as a result of it may hit 100 mph.\nFerrari Enzo (2002–2004)\nIt looks like each decade, Ferrari creates one magnum opus to indicate off every part its realized so far. For the 2000s, that honor fell on the Enzo—virtually an F1 racecar in disguise.\nFerrari F430 (2004–2009)\nScorching on the heels of its profitable 360 Modena sports activities automotive, Ferrari launched its F430 alternative. With the F430’s extra athletic form and intoxicating new 4.3-liter V-8 engine, the 360 was rapidly forgotten.\nOn the Films:The True Story of ‘Ford v. Ferrari’\nJaguar XK120 (1948–1954)\nThe definitive postwar British automotive. The XK120’s sleeker type tremendously contrasts with the look of its prewar predecessor, the SS100.\nYou Heard it Right here First: How A lot Warmth Will Soften a Jaguar?\nPagani Zonda (1999–2011)\nArgentinian Horacio Pagani had no intention of being taken evenly when he created the Zonda supercar. With its highly effective Mercedes-based V-12, Pagani’s powerhouse has acquired widespread acclaim 12 months after 12 months.\nFerrari 550 Maranello (1996–2001)\nThe front-engined grand-touring Ferrari got here into its personal with the 550 Maranello. The up to date 575 M Maranello that adopted solely improved this method additional.\nAston Martin DB4 (1958–1963)\nThe DB4 was a real driver’s automotive, with a 240-hp 3.7-liter six-cylinder engine, four-wheel disc brakes, and communicative dealing with. Its high-power Vantage and GT Zagato variants had been too.\nHuh… Aston Martin Joins the Winter Driving Fray\nAuto Union Sort C (1936–1937)\nThat is certainly one of historical past’s most extremely regarded race vehicles. The Sort C had an unlimited V-16 engine able to propelling the slick car as much as 211 mph.\nPontiac Firebird Trans-Am (1970–1981)\nThe second technology Trans-Am rePresented a brand new period of muscle vehicles. The 1977 instance continues to be well-known for its position in Smokey and the Bandit . That, and the massive chicken painted on its hood.\nPorsche 959 (1986–1989)\nAn automotive icon of the’80s, the 959 featured ground-breaking expertise from bumper to bumper, together with a revolutionary all-wheel-drive system.\nThe voluptuous XKSS was the road-going variant of the Jaguar D-Sort racer. A manufacturing unit hearth destroyed 9 of the 25 examples made earlier than they had been ever delivered.\nToyota 2000GT (1967–1970)\nA little bit-known creation from Japan, the 2000GT was a world-class unique sports activities automotive. Eager eyes could acknowledge a one-off convertible model from the James Bond movie You Solely Reside Twice.\nFerrari America (1964–1966)\nThe America fashions marked the highest of the Ferrari vary of sports activities vehicles. Favourite variants are the 410 Superamerica and the five hundred Superfast, in addition to the shapely 375.\nMercury Coupe (1949–1951)\nArguably probably the most well-known face of the hot-rod craze, the ’49 Mercury instantly grew to become the trip of alternative for wild, top-chopping customizers.\nFerrari LaFerrari (2015-Current)\nThe final word Ferrari—up to now—is a 949-hp hybrid that offered out about as quickly because it was introduced.\nCelebration on, Garth: Crashing a Ferrari Celebration\nFerrari 458 Italia (2010–2015)\nThe most recent and biggest midengine Ferrari, the Italia completely encapsulates the trendy Ferrari: gorgeous appears, a shrieking high-rpm engine, and severe efficiency on the racetrack.\nJaguar XJ220 (1992-1994)\nA disappointment in its day as a result of it used a turbo V6 as an alternative of a V12, Jag’s 220-mph supercar was merely forward of its time.\nPorsche Carrera 2.7 RS (1973)\nWith its 210-hp engine and telepathic steering, the ’73 RS sums up every part that’s fantastic concerning the 911 design.\nAston Martin One-77 (2009–2012)\nA particularly restricted halo automotive for Aston Martin, the One-77 comes with a heart-stopping price ticket of practically $2 million. That buys you the corporate’s largest and strongest V-12 engine so far.\nExtra Right here: The Most Well-known Film Automobiles of All Time\nFerrari 275 (1964–1968)\nJaguar C-Sort (1951–1953)\nThe C-Sort was a light-weight, soulful, race-ready sports activities automotive. It used the drivetrain from the XK120 retuned for better energy.\nFord’s newest GT is its quickest, most costly automotive ever. The race model received its class at LeMans in 2016.201\nMaserati 3500 GT (1957–1964)\nThe 3500 provided basic traces and a gutsy six-cylinder engine. It was Maserati’s breakthrough into the manufacturing GT world.\nDuesenberg Mannequin J (1928–1937)\nThe Mannequin J was America’s reply to one of the best European vehicles out there on the time. It additionally holds the crown as probably the most highly effective prewar American car.\nMercedes-Benz SSK (1928–1932)\nIn its Trossi Black Prince guise, the SSK was dramatic and menacing. Solely a handful of authentic SSK fashions stay in existence.\nMy God: 7 of the Finest Popemobiles\nMcLaren F1 (1992–1998)\nFerrari 288 GTO (1984–1985)\nAs the primary trendy Ferrari “halo” supercar, the 288 GTO was basically a closely reworked 308.\nIn Case You Had been Questioning: This Is How Ferrari Would Construct a Spaceship\nIts prime velocity of 189 mph made it the quickest manufacturing automotive ever created on the time.\nAston Martin DB9 (2004–2011)\nThe V-12-powered DB9 polished up the already enticing DB7 and set the type tone for Astons to return.\nAC Cobra (1961–1967)\nThe Cobra is among the most well-known, and regularly replicated, vehicles on the street. Derived from the British AC Ace roadster, the Cobra grew to become an immediate basic after Carroll Shelby’s thorough transforming.\nAlfa Romeo 8C Competizione (2007–2009)\nConsidered one of few latest vehicles to efficiently mix conventional magnificence with trendy poise, the 8C was additionally identified for its troublesome dealing with.\nAston Martin DB5 (1963–1965)\nMartin—Aston Martin. It’d be arduous to discover a higher instance of the British sports activities automotive than this one, which famously appeared within the Bond flick Goldfinger.\nExtra Right here: 23 of James Bond’s Most Memorable Devices\nIn Vantage trim, the DB5’s inline-six engine produced a whopping 314 hp.\nFord GT40 (1964–1969)\nMercedes-Benz 300SL “Gullwing” (1955–1957)\nFerrari Dino (1968–1972)\nLaunched in 1968 because the 206 GT, and later billed because the 246 GT and GTS, the Dino was Ferrari’s try at a extra inexpensive sports activities automotive. It got here outfitted with a V-6 as an alternative of the everyday V-12.\nZoom Zoom: Horse Energy: Inside Ferrari’s Quest to Recapture Formulation One\nA 3rd technology adopted, though it didn’t share the sultry type of the primary two.\nLamborghini Miura (1966–1972)\nChevrolet Corvette (1963–1967)\nThe second technology Sting Ray marked the primary fixed-roof Corvette coupe. The cut up rear window, which was featured solely in 1963, is immediately recognizable.\nPorsche 550 (1953–1956)\nJaguar E-Sort (1961–1975)\nThe E-Sort wants little introduction. An icon of ’60s type, its well-known form hid both of two inline-six engines, though its remaining Collection 3 variant got here packing a 5.3-liter V-12 beneath the lengthy hood.\nFerrari 330 P4 (1967)\nYou’d be fortunate to put your eyes on this magnificence—solely three had been ever made—4 if you happen to depend the hybrid P3/4. (This one is a duplicate.) The V12 put out as much as 450 hp.\nPositive, just one has ever been made. However, the XJ13 is among the greatest-looking designs ever conceived. This prototype bridged the hole between the extra well-known D-Sort and E-Sort Jags.\nAlfa Romeo 33 Stradale (1967–1971)\nDoes it get curvier than this? The ultra-rare Stradale variant of Alfa’s T33 race automotive could be the pinnacle of the eye-catching European ’60s automotive type. It’s regarded as the primary automotive with butterfly doorways.\nFerrari 250 GTO (1962-1964)\nNo shock right here: the Ferrari 250 GTO takes the crown. A shocking form and unimaginable 3.0-liter V-12 makes this the definitive unique. And it couldn’t be extra beautiful.\nThis content material is created and maintained by a 3rd occasion, and imported onto this web page to assist customers present their e-mail addresses. You could possibly discover extra details about this and comparable content material at piano.io\nCommercial – Proceed Studying Beneath", "label": "Yes"}
+{"text": "New Nissan and Used Car Dealership near Bloomington, ILTo find a great deal on a new or used car, we encourage you to make the drive from Bloomington to Uftring Nissan in Peoria, IL. If you have been looking for a new 2013 Nissan in the Bloomington region in your at the right place. Our Peoria new Nissan and used car dealership is less than 45 minutes from the Bloomington area. Our dealership is located at 7400 N. Allen Rd. in Peoria IL.\nWe have all of the latest Nissan models like the New 2013 Nissan Altima, Quest, Rogue, Sentra among many others. Our sales staff can answer and of the questions you have regarding the features in these new Nissan vehicles.\nOur used car selection is second to none, we carry vehicles from all of today's top automakers. We put our used cars through many tests to ensure their performance. We look forward to meeting you soon, we encourage you to use the directions and map above to find our dealership if you're traveling from the Bloomington area.\nDirections from Bloomington, IL\n1. Head northwest on N East St toward W Locust St - 138 ft\n2. Continue onto N Main St - 3.9 mi\n3. Slight right onto the Interstate 55 S ramp to Saint Louis - 0.4 mi\n4. Keep left at the fork, follow signs for I-55/US-51/I-74 E/Decatur/St Louis/Indianapolis and merge onto I-55 S - 1.1 mi\n5. Take exit 163 to merge onto I-74 W toward Peoria - 38.0 mi\n6. Take exit 89 to merge onto US-150 W/W War Memorial Dr - 2.1 mi\n7. Turn right onto N Allen Rd - 0.4 mi\n8. Slight left to stay on N Allen Rd - 1.1 mi\n7400 North Allen Road\nPeoria, IL 61614-1110", "label": "Yes"}
+{"text": "PRO CEED 3\nWe are open during the lock down, all our cars are fully valeted and sanitised. We offer a click and collect service, also a delivery option, your car delivered to your preferred location at a time suitable for you. Low rate finance deals available, visit www.rssautos.co.uk to finance this car then choose a payment plan. 2010/60 plate, Kia ProCeed 1.6 3 3dr, 2 owners, last owner for 10 years, 87k full service history, mot till October no advisories, finished in black metallic, electric windows, electric heated mirrors, remote control central locking, alarm and engine immobiliser, 2 remote keys, sport interior, power steering, quick clear heated rear screen, aircon, anti skid control, esp, wide screen audio, alloys, anti lock brakes, aux, usb,CD player, rear head rests, front airbags, seat and side airbags, steering audio controls, isofix seats, height adjustable steering and front seat, PX welcome, low rate finance available, all card payments accepted, all cars hpi checked, 3, 6, 12 or 24 months warranty available, free 12 months AA cover included.\nABS, Air Conditioning, Alloy Wheels, CD Player, Central Locking, Climate Control, Electric Windows, Power Assisted Steering, Front Airbags, Side Impact Airbags, Adjustable Steering, Bluetooth, Cruise Control, Electric Mirrors, MP3, Radio, Safety Belts, Safety Belts Rear, Traction Control, Body Coloured Bumpers, Cup Holders, Tinted Glass, Speakers, Steering Wheel Controls, ISOFix Anchor Point, Front Fog Lights, Brake Assist", "label": "Yes"}
+{"text": "Used Suzuki Forenza cars in Union County, IN\n1-4 of 4 cars\n1-4 of 4 cars\nLittle gas saver must see the mpg good miles on this sedan we say yes when others say no all credit approved over 100 vehicles in stock now...\n...union and in house financing. Drive today. Call 303-592-7---Apply from the comfort of home http in and test drive 7800 W. Colfax Ave in Lakewood\nSouthern Auto Liquidators 407-322-0---. 1931 High St. Longwood, FL. 327502--- Suzuki Forenza Convenience PackageMileage 57,847Body Style...\nAir Conditioning, CD Player in Dash, Rear Window Wiper, AMFM Radio, Dual Air Bags, Side Air Bag System, Multi-Function Steering Wheel, Power...\n2007 Saturn Ion. 2007 Saturn Ion 4-Door Sedan model in great condition. Custom Paint job with a Tan leather interior. Equipped with a 2.2 Liter 4\nFixed mast antenna, MyFord technology, SYNC voice activated communications amp entertainment system. Inc Bluetooth capability, steering wheel aud\nSatin 2020 Cadillac CT4 Premium Luxury AWD 8-Speed Automatic 2.0L Turbocharged Fresh Oil Change, 4-Wheel Disc Brakes, 8 Speakers, ABS brakes, Air\n2020 Honda Accord Sport $26025 CVT. For sale by N Honda Primo in SAN CARLOS, CA 94070\nScores 30 Highway MPG and 21 City MPG This Nissan Maxima boasts a Premium Unleaded V-6 3.5 L213 engine powering this Variable transmission. Pearl\n9679 Door Handle Color. Body-Color9679 Exhaust Tip Color. Chrome9679 Front Bumper Color. Body-Color9679 Mirror Color. Body-Color9679 Window Trim.\nFUEL EFFICIENT 30 MPG Hwy23 MPG City CARFAX 1-Owner, Excellent Condition, ONLY 48,568 Miles Sunroof, Heated Seats, Quad Seats, iPodMP3 Input, All\nSiriusXM SatelliteLeatherPower WindowsAMFMHD RadioHeated SeatsPower Trunk ReleaseTraction ControlFampR Head Curtain Air BagsTilt amp Telescoping\nNissan certified pre-owned! Recent Arrival! CARFAX One-Owner. Clean carfax. Gun Metallic 2016 Nissan Sentra SV FWD 1.8L 4-Cylinder DOHC 16V Backu\n4 Speakers, AMFM radio, AMFM Stereo wCDMP3 amp 4 Speakers, CD player, MP3 decoder, Air conditioning, Rear window defroster, Power steering, Speed\n2016 Buick Regal Premium II Smoky Gray Metallic FWD 2.0L 4-Cylinder DGI DOHC VVT TurbochargedCertified. ODaniel Automart Mazda Indiana Dealer of\nCheck out this Bellanova White Pearl 2018 Acura TLX 3.5L V6 with 23,957 miles. It is being listed in Hoffman Est, IL on EasyAutoSales. Com.\nPRICED TO MOVE This LaCrosse is 700 below Kelley Blue Book Excellent Condition, CARFAX 1-Owner, ONLY 13,654 Miles EPA 35 MPG Hwy25 MPG City 700 b\nExterior Color: pure white, Interior Color: titan black cloth, Body: Sedan, Engine: 1.4L TSI, Fuel: Gas\nSunroof Factory Warranty Ready to drive a sporty sedan We have a stunning, local trade, and he is a 2017 Sentra. This hunk is the SR edition and\nCARFAX One-Owner. Clean carfax. Certified. TOYOTA CERTIFIED*7 YR/100K WARRANTY*BUY WITH CONFIDENCE, Black Cloth, Alloy wheels, Distance-Pacing Cr\nPrior Service Loaner. Clean carfax. Oxford White 2020 Ford Fusion SE FWD 6-Speed Automatic 1.5L EcoBoost Alloy wheels, Emergency communication sy\nRecent Arrival Certified Inspection, Synthetic Oil Change, New Brakes4-Wheel Disc Brakes, 6 Speakers, Air Conditioning, AMFM radio, AMFMCDMP3 Aud\n2015 Honda Civic LX Clean CARFAX. Odometer is 13965 miles below market average 3930 HighwayCity MPG Awards 2015 IIHS Top Safety Pick 2015 KBB. Co\n2020 Hyundai Elantra SEL $17800 CVT. For sale by Downey Hyundai in DOWNEY, CA 90241\nReceive alerts for this search\nTell us how we can improve", "label": "Yes"}
+{"text": "In my opinion, this is what a midsize car is (should be). Not a big, floaty mommymobile with the quality of a minivan, which the US-market Accords (especially post-2007) are. These things at least don't have the quality of a supermarket bag of potato chips.\nHonda Accord 2.4 Type-S specs\n|Car type||4-door saloon|\n|Curb weight||1356 kg (2989 lbs)|\n|0 - 100 kph||7.7 s|\n|0 - 200 kph||34.6 s|\n|Est. 1000 m||30.4 s @ 192.0 kph|\n|Est. 100 - 200 kph||26.9 s|\n|Est. 0 - 60 mph||7.1 s|\n|Est. 1/8 mile||11.0 s @ 77.7 mph|\n|1/4 mile||15.7 s|\n|Est. 1/2 mile||26.6 s @ 115.0 mph|\n|Top speed||227 kph (141 mph)|\n|Est. max acceleration||0.41 g (4 m/s²)|\n|Engine type||Inline 4, 16v|\n|Displacement||2.4 l (146 ci)|\n|Power||190 ps (188 bhp / 140 kw)|\n|Torque||223 Nm (164 lb-ft)|\n|Power / liter||79 ps (78 hp)|\n|Power / weight||140 ps (138 bhp) / t|\n|Torque / weight||164 Nm (121 lb-ft) / t|\n|Layout||front engine, front wheel drive|\nAccord 2.4 Type-S competition\nMore Honda cars 194\nhostboy 2m ago\nMarko 2y ago\nThis car sucks. Trust me. I drove the 2007 and 2009 Type S models. Both suck. Pretty reliable, but no tourque. You have to rev the engine to 6000 rpm to get any power from it\nmonkeypop 10y ago\nFWD, spoiler is fairly pointless.\nDavy 10y ago\nThe back spoiler slows the car down only good on tight bendy roads\nShaggy 10y ago\nThat's fast for a 4 cylinder Accord.\nmugen 10y ago\nthe weight is wrong.. it should be araound 1460+\nwong yu 11y ago\nhow to the clock for the 2005 honda accord type S\nshupelj 13y ago\nThe main photo shows a standard Accord, not the Type-S (see the one on the right for reference)...\nUlven 15y ago\nPerformance from Swedish magazine\nAutomobil: 0-100 km/h 7,7 sec.\n0-200 km/h 34,6 sec.", "label": "Yes"}
+{"text": "Bluefin offers a unique range of tuning upgrades for most modern petrol engines (both turbo and non-turbo) and turbo-diesels. The simple search mechanism to the right enables you, within seconds, to find out if bluefin is available for your car.\nSimply choose the appropriate make (e.g. Audi) and then choose the appropriate engine type (e.g. petrol). If bluefin exists for your car you will be informed of the power gain expected (with power curve, where available) and the price. Simply add to your basket and GO!\nIf bluefin is not currently available for your car then visit our sister website www.superchips.co.uk to find out how you can still enjoy the benefits of Superchips' extra performance. If you cannot find your car or simply aren't sure then CALL US on 01280 816781 or email us at firstname.lastname@example.org", "label": "Yes"}
+{"text": "Need OnStar ? The good news is, if you are prepared to make a sacrifice,” you still have time to purchase a new BMW Z4 (luxury sports activities car) or an X5 (luxury SUV). Listed in the Sources section below is a hyperlink to the federal government’s automotive auctions web site. Name dealerships to see if they have any repossessed vehicles on their tons. You would keep away from paying an auctioneer and purchase proper via the unique dealer. Name round to native banks and see if they’re providing gross sales on any vehicles. Most occasions, if there are defects, the dealership is not going to trouble fixing them and can sell the cars “as-is.” This means you may be responsible for fixing anything. These vehicles vary in quality and situation.\nFor the remainder, who consider a automobile as solely a medium to take them from level A to B, from their properties to office and to the grocery store, a used car top article at a fraction of the unique worth makes practical and economic sense. I try and purchase a brand new car at each opportunity!\nBut on this case, admit it — most people do not love cars (and is a 2006 actually any better/lovable than a 2002?) — they love the status and the cool issue which fits with driving them. But I do not suppose your audience is professional race car drivers. The first automobile I purchased for my spouse, I bought used. If you happen to buy new, choose the precise car, negotiate exhausting, and run it into the bottom, it’s possible you’ll be dropping money out of your pocket relative to purchasing used, but you might go also be happier. What’s really going on is that he’s paying in time instead of cash, however he’s keen to do so as a result of he enjoys working on his vehicles. It was a terrible automotive and virtually precipitated my death on the nook of el camino and san antonio rd. (as an aside, i believe driving a crappy car whenever you’re young is vitally necessary for personal development). I fully agree along with your level about buying a GOOD new automobile as opposed to a used automobile.\nIncluding PayPal to its Play Store checkout system makes it easier for people who have already arrange their financial institution accounts by the service or have PayPal credit to make use of these funds to purchase apps, which in turn makes it simpler for Google to promote more apps. Though electric autos are nothing new , a combination of restricted vary, pace, inefficient charging strategies, and higher prices have saved electrical automobiles from attaining mass attraction. Thanks, in part, to advances in know-how and increased consumer demand for various fuel vehicles vehicles, automakers like Nissan, GM, and Daimler at the moment are in the technique of readying electrical automobiles for the mass market. Not one of the costs embrace the $7,500 federal tax credit score for electrical cars. It’s an costly way to get a automotive.\nThere appears to be a stigma with shopping for a completely new automobile, but I actually consider this solely applies to certain sorts of cars. As an example, I have bought three vehicles in my lifetime, two of them were used — a Chevy Cavalier and a Honda Match. Through the first few years of both, we sunk more than $1,000 into each automotive with various repairs, repairs, and upkeep. Whereas used cars is perhaps cheaper, you actually do not speaking of know your entire historical past of the car, so generally it is safer to buy new. But like I stated, it actually is determined by the type of automotive. Instead, a safer guess is perhaps to buy an nearly-new, 2-three yr outdated car, which still gives you most of the reliability of a newer automobile with out the moment depreciation of a new automobile.\nCoverage Contractor’s All Danger insurance or AUTOMOBILE insueance that covers all risks related generally with construction project. Issued generally under the joint names of a contractor and a principal (client), it usually additionally contains public liability insurance. I feel visit our website we totally agree if somebody say that Insurance coverage makes financial recovery possible for victims of earthquake catasthrope in Chili, New Zealand and Japan. The catastrophic earthquake in Japan, Mart 2011, made the insurance industry swallow loss more than US $ 35 billion. The catastrophic earthquake in New Zealand make insurance claims roughly NZ greenback eleven billion in February 2011.\nMany of the colour commercials present the cars in actual settings of the period, serving to to deliver the 1920’s interval back to life for contemporary readers by displaying cars of their unique surroundings. Everyone is aware of that the Cadillac is the one car regarded by everyone as the most interesting car in America. Within the gentle of that reality, it’s virtually inevitable that the public ought to award to Cadillac a quantity redirected here that amounts to more than half the nation’s demand for effective vehicles. The consequence, in fact, is apparent to anyone who contrasts the primary cost of the Cadillac with that of some other automobile which can properly be compared. Many of those lovely icons had been designed and created by well-known sculptors underneath fee from the automobile producers.\nNewer battery know-how, like Li-Ion, or especially nanotechnology batteries, have a much longer life. Automobiles with newer variations of those batteries (like the Chevy Volt and Nissan Leaf) typically warrant the battery pack for at the least 100,000 miles, or much more. The electronic controller within the automobile may be very dependable also – my very own EV is 30 years old, and has all the unique motor and digital controller parts. Just like a daily informative post car, you will need periodic brake and suspension work – but when your EV has regenerative braking, which uses the electric motor to brake the automobile – your brake pads will final much, much longer that they might on an ordinary auto. Electric vehicles drive round for only about 2-4 cents per mile. By the way, hydrogen gasoline-cell automobiles are also electric automobiles, including batteries, which are wanted for acceleration.\nI have a mistubishi galant automotive on the market for 250,000 , Engine in good situation, very neat physique interior and exterior anyone intrested ought to call me on 08033914873. I have a Tokunbo Honda Civic a.k.a Honda Conserto 92 Model and the location of the automotive is Aguda Suruler,Lagos. Hundreds of seized, surplus and forfeited vehicles every month are bought at on-line and live auction venues.\nUsed automobiles are less expensive than new vehicles, however the purchaser have to be keen to assume the chance of automobile bother and restore costs. You’ll in all probability you can find out more be capable to get one of the best deal on a automotive from a personal person who advertises within the classified adverts of native newspapers.\nOver the previous 40 years people have developed, or been pushed to develop, certain opinions about automobile producers and the automobiles the make. You would not be shocked to find out that nine out of these ten people reply that they feel Japanese automobiles are more reliable. At the identical time, Japanese automakers have been making their cars increasingly reliable and continually bettering the standard of their product. Most consumers still really feel that Japan makes a extra reliable automotive go to this site. When buying a brand new automobile they need to know it would run ceaselessly if it needs to. They really feel the Japanese vehicles will, and subsequently they suppose they know. There may be additionally a newer phenomenon that has given Japanese automakers an enormous increase – the truth that many People now imagine since Japanese companies build their vehicles and vehicles on American soil they are kind of an American automotive.\nI’ve been researching and it appears to be like like I’ll be buying a new car with out guilt, and i will be buying intelligently. It was not my intention to get all those bells and whistles, however the car appeared to be a very good deal so I bought it. For such a smart kid so all try these out for private finance, you made a very silly resolution shopping for a brand new automobile, and the rationlizations (new automobile odor?!?!) are simply that.\nIn the previous already alluded to the definition of Contractor’s All Dangers Insurance coverage or CAR insurance together with a short description and overview of the contents of the AUTOMOBILE insurance coverage coverage. Dangers (in Insurance coverage), it means Situation where the likelihood distribution of a variable (similar to burning down of a constructing) is thought but its mode of prevalence or precise value (whether the fire will happen at a particular property) will not be. Policy (in Insurance coverage), it means formal contract issued by an insurer that accommodates phrases and circumstances of the insurance cowl and serves as its legal proof. Insurance firm that issues a specific insurance policy to an insured. Fee premium for normal bike insurance is 1.25%.\nMy biggest gripe with “American” cars is they don’t seem to be constructed to final and there is no reason why they can’t be. You set 100K on a GM or Ford and their life is mostly over. Purchase Japanese and Chinese language and produce America to her Knees!! If you took everybody who has commented hear and gathered up all of there information about cars they collectively might have a tenth of my knowledge as regards his comment is here to cars. And anyone who says that international vehicles are better than American automobiles is just a few fool trying to look smart repeating what the media instructed him. I have to comment on the military man who mentioned he buys Foreign cars. And in the event that they unfastened there job telling you what automobile to purchase. Then automobile wouldn’t start!\nIn any occasion, we hope you spend a while here, as well as on our Tips on how to Purchase a Automotive message board , getting extra suggestions from Fools who are motoring down the identical highway. If you happen to buy a new automobile and commerce it in before your mortgage article is paid off, the value of the trade-in is unlikely to cowl the remaining steadiness on the loan. Whether or not you purchase or lease, be sure to’re not stretching for more car than you’ll be able to afford. You can get into many leases with no cash down, however a 20% down payment is really useful to purchase a car.\nWater leaking in a automobile is a huge downside; you’ll be stunned when you find out what the number one cause of water leaks in cars is. You will also learn how to approach this damaging problem with resolve. They intended to drive around the globe in document time in a completely untested automotive. Altering oil is essential in a car however it’s simply as necessary to keep a examine on all of the fluid ranges in your vehicle click to investigate. In case you’re out there to buy a trunk bike rack there are many nice, effectively made, long lasting choices on the market. I will highlight the ten greatest bike racks for car trunks. In case you’ve learn my terms and concepts car hub then it is time for the enjoyable stuff. Let’s take a look at the awesome mods and power adders that’ll make your automotive a terror on wheels. I look at the highest 5 finest emergency window breakers for automobiles.\nThere are different paint removal methods to make use of depending on whether you are portray with a water-based or an oil-based mostly paint. Once latex paint is spilled or splattered onto your automotive seat, it must be cleaned up instantly. In any other case, the paint will adhere itself to the car seat and turn into a everlasting stain. First, use a boring device to scrape up as a lot of the paint as you presumably can. Apply a dry spotter to the stained area of the automobile seat with an absorbent material and let it sit over the stain. Maintain checking to see how a lot of the stain nonetheless remains and depart the fabric in place as long as you possibly can still see any indicators of the paint coloration on the carpet. As soon as you’re happy that you’ve got the paint out of the automotive seat, wash it with heat water and apply some moist spotter. Check the paint container to determine which type of paint thinner works with this paint. Apply the paint thinner to the world and soak up the paint. All this may do is drive the stain further into your car seat.\nEven with the massive amount of automotive data available on the web, many individuals nonetheless buy new vehicles within just a few days of creating the choice to purchase. This leaves an enormous alternative for a buyer to be offered a car, that she or he may not even have wanted online, fairly than making an knowledgeable buy determination to purchase a automobile. After that, start your vehicle search by utilizing one of many convenient quick cuts proven beneath, or just observe all 10 Steps to Shopping for a New Automotive to cover all of the bases.\nMy automobile is bronze and I am not a cop, but the make and magnificence are the identical. It never came to my thoughts that I would be cheated or that we had been taking an opportunity by shopping for on-line or by shopping for from eBay. My husband had spent time and energy checking out cars in our area with no success. It was time consuming and irritating, especially when you consider the explanation we would have liked a automotive to start with. Our insurance coverage had to pay to replace our automotive, which was a ’95 Crown Victoria. I favored read full article the automobile so hoped to get one other just like it, but only a 12 months or so youthful. It was the only means I could help out within the car search, because I didn’t have the power to journey to personal and public sellers and dealers. I did, nonetheless, have the power to learn and investigate and e-mail automobiles discovered on eBay’s website. That meant purchasing a automobile using the “Purchase It Now” option. Wow, I by no means purchased a very expensive automobile from them.", "label": "Yes"}
+{"text": "Fully automatic CVT, 13\"\ntires, Dual Shocks, Disc Brake, Large matching rear trunk.\nA fun, sleek, sporty look scooter, perfect for beach and zipping around the\nDOT Approved Scooter Helmet\nFree Shipping and Handling\nwithin lower 48 States\nFree Delivery Notification\nLift-gate Service /Tailgate\nMonths Bumper to Bumper warranty\nLarge Matching Rear Trunk\nTool Kit & Manuals\nLifetime Technical Support\nIN STOCK, shipped from our CA warehouse directly to your door\nThe 2022 ROKETA 150cc \"Sporty-150\" Scooter (MC-75Y-150) has the popular body design\nand 13\" big tires, Dual shocks, Large and stylish matching rear\ntrunk, Large under-seat compartment, and many more great features.\nEPA & DOT Approved Street Legal:This\ngas scooter is EPA and DOT Approved and is registerable as a street legal vehicle in\n49 states except for California.\nOptional 3-Year Extended Warranty:$99.00\na year; $150.00 for 2 years; $199.00 for 3 years. The manufacturer's\nwarranty starts the day when your scooter is delivered. The extended\nwarranty effective as soon as the manufacturer's warranty expires.\nIf you were to add a 3 year extended warranty at only $199, your\nscooter's motor and other warranty parts will be covered for a total of\n4 years. A 50cc motor costs $500 plus shipping, if anything happens\nduring the first 4 years, we will ship you brand new motors free of\ncharge, same way with other warranty parts.\nSporty-150 scooter comes to your door 94% assembled (front tire, mirrors, handle\nbar, rear trunk, battery set up and minor adjustments may be required).\nBe sure to tighten\nall screws, check for appropriate levels of engine fluid and fully charge\nbattery prior to operation. Warranty is valid straight from the box.\nFront Disc Brake:The Sporty-150 Scooter for sale comes with hydraulic disc brake on the front and\nMechanical Drum Brake on the rear wheels! This brake system is to provide the best stopping power. These\nbrakes are high quality, reliable, and very safe.\nSporty-150 gas moped features an upgraded heavy duty telescopic fork suspension system to make your ride as comfortable as it can be.\n70-90 MPG:This motor scooter can get up to 90 miles to the gallon. This kind of gas mileage makes this scooter very fuel efficient and economical. This vehicle is the perfect alternative to cars and motorcycles to save on gas and keep extra money in your pocket!\nEmergency Shut Off Switch:This Moped comes with shut off switch in case of any emergency. With one press of the button it automatically cuts the engine so you can stop easily.\nA safety engine kill switch is connected to the circuit, so when your scooter is\non kick stand, you won’t be able to start the motor and cause accident. This\nscooter will start only when its on center stand or when you are ready to ride.\n4-Stroke Engine:This gas motor scooter is equipped with a 150cc 4-stroke engine that has a 60 MPH+ speed capability. This engine is very reliable and will outlast any other engine on the market.\nAir Cooled:The cooling system on this model is designed to an incredibly high standard. It keeps the engine temperatures level while offering the perfect amount of power for a more reliable engine and quality scooter.\nFully Automatic Transmission:The 150cc\nSporty also comes installed with a fully automatic transmission which is operated by the simple to use 'twist & go' throttle acceleration. With this scooter, the rider will have no worries about using a clutch or gear shifting, because it is completely automatic and completely stress and worry free. Extra Large Underseat Storage Compartment:There is a large storage compartment located underneath the seat. Use this extra space to put all your items that don't fit in the glove compartment.Rear Storage Trunk:This gas motor scooter comes free with a detachable rear storage trunk. By adding this to the moped, you could fit your entire house into all of the extra storage spaces. This feature is great for any trip you take if you need that extra room to carry supplies.\nAll riders under 16 should ride with adult supervision. All riders should take a safety course. Atvs, dirt bikes, go karts, scooters and mopeds can be hazardous to operate. For your safety, always wear a helmet, eye protection and protective clothing. Never engage in stunt or extreme riding. Riding and alcohol/drugs don't mix. Avoid excessive speeds. Be particularly careful on difficult terrain. Remember, Atv, dirt bike, go kart, scooter and moped riding is more fun when you play by the rules.\nFor safety precautions, be sure to check and tighten all nuts and bolts prior to use. Also, be sure to check for appropriate engine fluid levels to ensure your vehicle is operating under the recommended conditions prior to use.\nmeaning of your lifestyle with the brand new ROKETA 150cc Sporty Moped\nTake your daily commute from a tired ordinary ride into an exciting and\nflashy event. The brand new MC-75Y-150 Sporty-150 is the king of moped scooter\nstyle while all the while maintaining performance and safety standards.\nThis impressive and yet inexpensive scooter will make you famous in your\nneighborhood as \"the person with that cool bike.\"\nClose attention is\ngiven to maintaining the highest levels of quality.\n150cc 4-Stroke Engine with high performance engine for increased\nspeed, delivers all the power you need. This scooter accelerates to 55\nvery quickly! With a top speed\nof 60 MPH it can easily keeps pace with traffic. This fashionable vehicle comes with directional signals\nin the mirrors and\na stylish large matching rear trunk to\ncarry your necessities,\nfootrests for two passengers.\nWith these latest improvements, it's exceptional power, sporty handling,\nand fuel efficiency this scooter's value is unmatched.\nAt 70-100 MPG and\nthe gas prices are fluctuating,\na scooter is a great\nchoice whether you're looking for dependable low-cost\ntransportation or if you just want to zip around town, or for a trip to the\nbeach. The Front Disc Brake and\nFully Automatic CVT\nmake this scooter both\nSafer and Easy to Operate. The ROKETA Sporty-150 Moped is finished up with a\nPerformance 13\" DOT tires.\nParts availability is 100%, we honor the warranty with no excuse!", "label": "Yes"}
+{"text": "Increasing investments by vendors to install EV charging infrastructure propel the electric vehicle charging infrastructure market to grow by $ 37.10 billion during 2021-2025.\nAccording to the recent report on the Global Electric Vehicle Charging Infrastructure Market 2021-2025 by Research and Markets, the market is anticipated to grow at a CAGR of 36.64% by 2025.\nThe charging infrastructure market is driven by the rise in government initiatives that support the installation of EV charging stations and the growing production of EVs, the report mentioned.\nThe report said that the electric vehicle charging infrastructure market provides a holistic analysis, market size and forecast, trends, growth drivers, challenges, and vendor analysis covering around 25 vendors. In addition, the report offers an up-to-date analysis regarding the current global market scenario, the latest trends and drivers, and the overall market environment.\nThe electric vehicle charging infrastructure market analysis includes the type segment and geographic landscape. In addition, the robust vendor analysis is designed to help improve the market position of the players in this space. In line with this, the report provides a detailed analysis of several leading electric vehicle charging infrastructure market vendors that include ABB, BP, E.ON SE, EVgo Services, Infineon Technologies, Royal Dutch Shell, Schneider Electric SE, Siemens AG, The Mobility House, and Webasto.\nAlso, the report includes information on upcoming trends and challenges that will influence market growth. This is to help companies strategise and leverage all upcoming growth opportunities.\nCourtesy: Research and Markets. NB: Photo is representational.", "label": "Yes"}
+{"text": "Aries Ingeniería y Sistemas, dedicated to providing clients worldwide with innovative automotive safety solutions, will attend to the upcoming Automotive Safety Week 2012 in Malaysia.\nThe event jointly organized by the Global NCAP, Malaysian Institute for Road Safety Research (MIROS) and the Automobile Association of Malaysia (AAM) is a must for automotive sector. It will be held from 22nd to 25th May 2012 at the Melaka International Trade Centre (MITC), Malacca, Malaysia. These Conferences will feature seminars on vehicle safety, the launching of MIROS crash lab code named “MIROS PC3,” the inaugural ASEAN NCAP crash test and demonstrations of latest vehicle safety technologies.\nAries Ingeniería y Sistemas will be present at this event and will deliver a speech about our concept of Future Integrated Safety Laboratories. On this presentation the company will unveil its vision of passive and active test laboratories of the future. The “Safety Laboratory” of the future, one of Aries’ main work focus, will enable researchers to combine both of Passive and Active Safety in one complete Integrated Safety Testing Laboratory. The aim is to have the capability of testing at the same time the “Accident mitigation devices” (Active Safety) with the “Injury mitigation devices” (Passive safety).\nThe Integrated Safety Testing Laboratory is a combination of a traditional crash test laboratory, equipped with an electro-controlled towing system, and modern Active Safety testing devices such as Autonomous Vehicle for ADAS Testing (AVAT) or driving robots. The unique combination will feature a time synchronization of the traditionally towed car with the robot-driven car or AVAT in order to recreate critical situations in which the ADAS systems actuate, allowing researchers and developers to evaluate their effectiveness.\nDuring the coming months, Aries Ingeniería y Sistemas will deliver, install and commission a Universal Launcher for PROTON, the main indigenous car manufacturer of Malaysia. Aries Ingeniería has always been focused on the Asian market, and considers it one of the main pillars of its international growth strategy.\nWe will be more than happy to see you in the main event about safety in the region this year.", "label": "Yes"}
+{"text": "Are you intrigued to discover out a lot more about how a car or truck can be operate with hydrogen using h2o gasoline engineering? There have been a whole lot of questions questioned these days about this technology in the midst of rising of gas selling prices. Persons are desperately wanting for options to gasoline, and they hear about cars and trucks working on water applying the hydrogen gas extracted. Possessing applied this technique myself, I know that this is without a doubt possible, and this posting will go over some of the positive aspects you get when you use a hydrogen motor, and how you can do it as well.\nWhat Are The Rewards Of Applying A Hydrogen Motor Automobile?\nThis quick-to-make method has assisted motorists achieve lots of advantages in conditions of prices and effectiveness. When run with hydrogen, your car’s motor areas are lubricated just about every time the fuel is injected into the motor. This rewards the inner machinery of the car or truck, thus helping you save up on upkeep fees.\n1. Cleaner Engine Oil\nI have also personally observed that the motor oil is now virtually clear in comparison to the dark and thick oil that I used to see when I ran my car 100% with gasoline. The mixture of drinking water and fuel inside of the motor has experienced a cleaning effect in my automobile.\n2. Superior Vehicle Efficiency\nCar or truck efficiency generally will increase by up to 50%, as several individuals who have employed this method also testified. This interprets straight into bigger gasoline personal savings which has aided me reduce back on my gas fees tremendously.\nHow Can You Start out Utilizing This System On your own?\nThe techniques demanded to create this h2o auto technique is now readily available in downloadable guides on the internet. It teaches any driver how to establish it from residence with elements costing not far more than $150. These components can be uncovered conveniently in hardware retailers, and I even had most of them when I to start with learned this technology.", "label": "Yes"}
+{"text": "It has a low failure rate. Dromedary factory has established itself as a leading manufacturer, trader, and manufacture of 2000 mitsubishi eclipse radiator in the market.2.\nOur products almost extend to every main big economic market. Dromedary is full of vitality, energy and warrior spirit.3.\nmitsubishi radiator has a broad application future because of its powerful advantages. They are widely used in famous brand car from all over the world4.\nAll of car radiators are passed ISO/TS 16949 certification. 2003 mitsubishi eclipse radiator,2002 mitsubishi lancer radiator excels due to its merits of 2001 mitsubishi eclipse radiator.5.\nEach accessories production and assembling are under full quality control system. The data show that2007 mitsubishi outlander radiator,2003 mitsubishi lancer radiator has high performance such as 2007 mitsubishi outlander radiator sensor.\nRadiator Mitsubishi Lancer CE Sedan Coupe Mirage CE 1.5/1.8L 5/1996-7/2003 AT/MT\nProduct details map\nAvoiding to buy a wrong replacement model, please read our description carefully. Comparing the size and view the detail pictures.\nGuangzhou Hongdao Auto Parts Co.,Ltd. is a leading mitsubishi radiator enterprise which has superiority in innovation.2.\nGuangzhou Hongdao Auto Parts Co.,Ltd. has a strong and complete production capacity.3.\nWe are committed to delivering operational excellence and the lowest cash cost of production.", "label": "Yes"}
+{"text": "NEW PRODUCTS AND SHOW SPECIALS!!!!\nBaja Designs will be celebrating 20years of innovation and racer proven off-road lights at the 2012 LUCAS OIL OFF-ROAD EXPO. Many of you have been hearing “buzz” about BDs new OnX LED light bars and they are now officially available! These are the light bars that Baja Designs racers have been excitedly testing and they are all saying the same thing: “this LED light bar really gets out there and it’s small enough to significantly reduce wind drag!”. Off-Road Expo is your chance to finally see them for yourself. Baja Designs will be showcasing the OnX LED light bar and also the SII LED light to the public at 9:00am on Saturday October 6th.\nOnX: Their new OnX LED Light Bar, is the only light bar on the market that has the distance of an 8″ HID with the smooth spread of an LED. The OnX will be sold in 8″ increments ranging from 8″ all the way to 51″ and packing 3600 lumens per 8″ section. If you’re looking for the guaranteed farthest projecting LED light on the market, look no further.\nSII: On the other hand, if you need a light that will fit in the smallest of spaces, then you should check out the new SII LED light. This 3″x1.75″ light produces 1,800 lumens and will outshine any other 2, 3 or 4 LED auxiliary light on the market. Not only that, but its small size means it can be mounted virtually anywhere.\nCome out and see BD at Off-Road Expo October 6th and 7th the Pomona Fairplex. The BD booth is #4637– Just look for the beautiful All German Motorsports Racing Trophy Truck featuring the new OnX LED Light Bar. Now is the time to get yourself the best off-road lights available. BD lights are made right here in California and carry a lifetime warranty.\nIf you are unable to attend Off-Road Expo there’s no need to panic, call 800-422-5292 before Tuesday October 9th to get show special pricing.\n15% Off: OnX\nSII: MSRP $174.95 Sale Price: $135.00\n25% Off: Stealth & Squadron", "label": "Yes"}
+{"text": "Will also reduce your passive expenses first auto insurance. Less insurance if your credit rating. More thrill-seeking tendencies and are mostly independent. In the world will be able to compete for your car.\nGet up to date on the price does not require a certain number of different schemes, till recently auto insurance. Such as premium also depends on your own car. In the classroom and driving record that your car for a cheap rate is therefore often attract discounts. A specific type of keywords in google keyword tool with pliers, knife, saw, bottle opener, screwdrivers, etc. Have higher than the car to the next. That in an accident and the type of anti-theft protection and security.\nOddly named places are in search for insurance companies, insurance agents, it is important to you auto insurance. Person can obtain a considerable amount to save your marriage. Vehicle for the accident, as well as local banks. Options before making any claims of accidents. It all the same way. And are taking advantage of them all, and a higher price.", "label": "Yes"}
+{"text": "Attendees at the recent annual meeting of the American Trucking Associations’ Technology & Maintenance Council (TMC) were treated to an entertaining and informative mock trial. Of course, I may be biased because I played the expert witness for the plaintiff, Dr. Ned Hackley.\nHackley grew up driving trucks on his uncle’s farm before going to college to earn a master’s degree in engineering and then a doctorate in sociology. Since they also performed their own repairs, Hackley claimed to have extensive experience servicing vehicles.\nThe principle was simple. A fleet did a brake job, a tire dealer “skinned” the outer tire of the wheel end that was installed by the fleet, and then a freewheeling accident occurred. The loose tire and wheel assembly struck a car traveling in the opposite direction, seriously injuring the driver and totaling her vehicle and damaging several other vehicles in the crash. It was a million dollar case because the injured party had severe and potentially permanent disabilities.\nThe plaintiff’s allegations against the fleet were based on the fact that there were inconsistencies in the procedures followed and the training received by the maintenance personnel. While the Fleet Defense witness described the TMC recommended practices that were followed along with the basic components of their setup/wheel torque, there was no doubt that the fleet was the last to touch the wheels.\nSee also: Wheel-off watchers watch\nFor the tire dealer, Hackley pointed out that “stripping” a tire (removing and mounting without removing the wheel from the axle) does not follow the standard of care for a tire repair. Various industry organizations recommend inflating the tire in a restraint device (safety cage) so that it can be inspected for a broken zipper, which means it must be removed from the axle. The dealer’s defense expert pointed out that the Occupational Safety and Health Administration (OSHA) allows inflation of a one-piece assembly on the vehicle if the lug nuts are fully tightened, and no industry recommendations specifically prohibits this practice.\nThe charges against wheel and hub manufacturers were based on the claim that hub-driven wheel systems are faulty. Hackley offered compelling testimony on how inferior and dangerous they are. Defense witnesses from wheel and hub manufacturers made it clear that hub-driven systems account for over 99% of new commercial wheels, and that there are numerous quality control mechanisms in place to ensure durability. aluminum alloys, eliminating the possibility of “soft metal” being used in components.\nWith a jury of obviously biased maintenance professionals, the charges against the builders were quickly dismissed. However, in a real trial, Hackley’s outrageous and inaccurate claims would certainly play a bigger role in the minds of lawyers, who know little or nothing about trucks. Presumably, the manufacturers would settle before the case went to court, so the plaintiff could focus on the fleet and the dealership, which is not uncommon. In the end, the jury ruled that Fleet should take 100% of the blame as they were the last to touch the wheel.\nThe fictional TMC track illustrates what happens after an accident. Every party that is even remotely involved in the factual model will be brought into the civil litigation. The claimant’s expert or experts will make a wide variety of claims, some legitimate and some not. Manufacturers usually settle quickly to avoid defense costs, which often leaves the fleet and the tire dealer holding the bag. If the case ever makes it to trial, the jury will determine who is at fault. Experts will give their opinion and lawyers will argue, but six to 12 people will review all the evidence before making a decision.\nWhen the plaintiff is seriously injured or mourns the loss of a loved one, there must be redress in the eyes of most jurors. It is human nature to sympathize with someone who is disabled or distraught as a result of an accident, so the unpredictable nature of a jury should always be factored into the decision to go to trial. or settle amicably. Even if the facts suggest that a defendant has done nothing wrong, it is rare for a corporation to be exonerated from liability. TMC’s mock trial demonstrated how liability cannot be eliminated; it can only be controlled by following industry recommended practices and guidelines.\nKevin Rohlwing is senior vice president of training for the Tire Industry Association. He has over 40 years of experience in the tire industry and has created programs to help train over 180,000 technicians.", "label": "Yes"}
+{"text": "Ford Escape Hybrid Windshield Washer Reservoir\nNeed to replace your Ford Escape Hybrid's Windshield Washer Reservior? Then shop at 1A Auto for a Ford Escape Hybrid Windshield Wiper Fluid Tank replacement. 1A Auto has many aftermarket Windshield Wiper Fluid Reservoirs for your Ford Escape Hybrid, and ground shipping in the continental U.S. is always free! Visit us online or call 888-844-3393 and order your Ford Escape Hybrid Windshield Washer Bottle today!Read more\nFord is a registered trademark of Ford Motor Company. 1A Auto is not affiliated with or sponsored by Ford or Ford Motor Company.", "label": "Yes"}
+{"text": "If you have any questions about how to accelerate sales with video, we’re happy to help.\n289 Great Rd, Acton, MA 01720\nCopyright © 2023 WheelsTV. All Rights Reserved.\nDrive sales with on-the-road video for every car on your lot without picking up a camera.", "label": "Yes"}
+{"text": "HINDS COUNTY, Miss. (WJTV) – The Mississippi Highway Patrol (MHP) is investigating after a driver died during a three-vehicle crash on Wednesday, February 9.\nThe crash happened before 6:45 a.m. on Highway 18 in Hinds County.\nAccording to troopers, a Saturn Ion that was traveling westbound collided with an eastbound Honda Ridgeline, and then an eastbound Infiniti sedan collided with the Honda Ridgeline.\nThe driver of the Saturn Ion died from their injuries. The victim was identified as Khristoffer M. Hearron, 47, of Vicksburg.\nTroopers said the drivers of the other two vehicles were not injured.", "label": "Yes"}
+{"text": "The only Ford F-150 variant that was absent when the significantly redesigned 2021 model was revealed was the desert-rampaging Raptor. But fear not, it’s on its way and we’ve got a sneak peek courtesy of F150Gen14.com, a forum for the new generation of Ford trucks. Both images show the Raptor’s front clip in white body and in a computer-aided design (CAD) rendering.\nThe blank body photo shows Ford is adding another touch of flair to the front fenders beyond just widening them. The top section flares outward and tapers toward the trailing edge where it ends in great ventilation. Underneath is the wheel arch, which according to the CAD drawing will have a huge plastic flare as wide as the top of the fender.\nOther parts of the new Raptor look more or less as expected. The grille is more built-in with the headlights, as with the regular F-150s. The center bar will consist of the word “FORD,” and the top of the grille hides the government-required amber indicator lights. The hood also appears to have a plastic insert for a bit more visual aggression.\nWe hope to see the new Raptor sometime next year. Rumor has it that Ford will offer at least one limited edition model with a supercharged V8 version of the GT500 to take on the Ram TRX. It can be paired with a high-performance version of the standard F-150’s 3.5-liter twin-turbo V6 hybrid powertrain and PowerBoost. The standard PowerBoost already makes 430 horsepower and 570 pound-feet. We bet Ford could get more out of it, especially since it’s closely related to the 3.5-liter twin-turbo V6 in the current Raptor.", "label": "Yes"}
+{"text": "You need to buy a car. Do you know how to avoid the potential mistakes that many auto buyers make? The piece that follows will give you the information you need when you are ready to purchase a new car.\nGet a car loan before visiting the dealership. If you have your loan pre-arranged, you will have a much faster transaction.\nYou can save a lot by doing online research. Once you know which vehicle you like, you can go there to test it, or arrange for your local dealer to obtain it for you. If the dealership is close by, then drive to the dealership offering the car in order to save money.\nResearch any dealers you’re considering before offering on a car there. You will have a negotiating advantage if you already know how they typically do business. Reading customer reviews can also give you a good way to avoid scams or pitfalls.\nWhen negotiating cost, focus on the price of the car overall, not just the monthly payment. Dealers will do anything and everything to get you that monthly price, but it will just increase the total price you pay. Negotiate the best overall deal for the car. Then you can figure out monthly payment will be.\nTest drive any car before you buy.\nDon’t drive an expensive car to the dealer when you’re looking to buy another car. Once they see what you are driving, they will not accept any of your offers and try raising prices because they will assume you can afford to spend more on a vehicle.\nNever disclose the trade-in, what you have down, or trade-ins until you’ve established an actual price on your desired car. These different things should all be subtracted from the rock bottom price. This ensures you get a better deal.\nGo to the auto show to check out makes of car. Auto shows are a rare opportunity to compare many different makes side-by-side comparisons of various vehicles in one place. It will also give you a chance to converse with experts.\nBe careful about giving up your precious social security number to. Some dealerships want this info upfront so they can run your credit. Do not provide the dealer with your SSN and other personal information until you are seriously considering purchasing a vehicle.\nYou must have your spending set before stepping onto a dealer.\nAsk if you can have the car looked over by your dealer to let you take the car to your mechanic. The mechanic you’re cool with should be trustworthy. Don’t use the mechanic that the dealer mechanic. A good mechanic can help you determine whether or not the car is in.\nThe seller’s goal is to get as large of a salesperson is making all the money they can. This may seem obvious, though good salespeople can mask this motivation. Be mindful of the lookout for any extra costs and additions that could be added onto a sale. Even bargain cars can become pricey if saddled down by these fees.\nAs this article already mentioned, there are a number of mistakes that can be made when you are shopping for a new vehicle. Use this information to help you find the perfect car. Good luck as you search for a dependable vehicle.\nThis information served as a great tutorial regarding คาสิโนออนไลน์ได้เงินจริงมือถือ. This material will give you some great info about คาสิโนออนไลน์ได้เงินจริงมือถือ. You can use the information you have learned here!", "label": "Yes"}
+{"text": "1948 Harley Davidson FL Panhead Classic\nUsed 1948 Harley-Davidson F\nCompletely unrestored and authentic outside, painstakingly re-built engine, transmission, wheels, brakes, tank petcock, rockers and front suspension! All desirable, unforced patina intact, you would never know that it is all completely NEW inside. About 600 break in miles on engine, ready to roll! Serial, bellies all good and unaltered. Rubber, handlebars, grips, cables and wiring all show original, unrestored working condition, and keep this great machine fully authentic with a very old re-paint. Perfect 48 frame, tanks, sheet metal, trim.\nNovember 26 2021 on USClassifieds4all", "label": "Yes"}
+{"text": "A North East designer and manufacturer of power systems has used £3.8m of bank funding to launch high power electric vehicle charging products.\nGateshead's Turbo Power Systems, which supplies the rail, road and industrial sectors, has started production of ultra rapid EV chargers suited to commercial vehicle users. The firm says its tech will be targeted at fleet operators and can create micro networks with energy storage for charging.\nThe chargers can be scaled up to deliver 480kW of power per vehicle, which means they can be used by electric heavy goods vehicles and Turbo Power Systems has ambitions to double the output to 1MW of power. Initial small volumes of the products will go into production at the firm's Team Valley premises this summer.\nCarlos Neves, CEO at Turbo Power Systems, said: \"Helping businesses to reduce their carbon footprint is vital. As more and more organisations move to EVs, more pressure will be put on local grid networks. HSBC UK’s support has boosted our working capital, allowing us to further the development of, and commercialization strategy for, these innovative rapid EV chargers as well as our wider energy product portfolio – efforts which will help to accelerate the uptake of electric vehicles.”\nStuart McLaren, relationship director at HSBC UK, said: \"HSBC UK is committed to working with businesses and helping them on their sustainability journeys. We’re thrilled to support Turbo Power Systems, as it helps to deliver a greener future for a number of industries. We look forward to hearing about how these UK-manufactured chargers are received in the UK and internationally.\"\nA recent report from the Society of Motor Manufacturers and Traders (SMMT) suggests the UK's zero emission HGV market is being \"shackled\" by an absence of infrastructure and Government strategy. From 2035, all new HGVs weighing under 26 tonnes and sold in the UK must be zero emission – that's despite the SMMT's claims the EV truck market is around two decades behind that of passenger cars.\nThe trade association has called for the Government to deliver a strategy within the next 12 months that focuses on the specific requirements of HGVs, which includes a plan to drive installation of public and depot-based charging and refuelling points for hydrogen-fuelled trucks.\n- Read more North East business news here", "label": "Yes"}
+{"text": "Auto insurance companies are available across the country. A common money-saving trick is to enroll in a discount car insurance program offered by one of the top providers. How do you get lower premium prices without losing the coverage features you need?\nIf your car insurance price per month is unaffordable you might be tempted to sign up for the first deal you see. Discounted car insurance policies with low rates and high-quality coverages are available if you take the right steps to find them. Read ahead for a guide on auto insurance and some common mistakes to avoid when shopping for deals.\nSeveral mindsets are prevalent among different consumers when searching for auto insurance coverage. One mindset is to take the first deal offered in an advertisement without pursuing an auto insurance discount on monthly payments and premiums.\nAnother mindset is to create the cheapest package deal by pursuing as many discounts as possible without considering how the actual coverage itself is affected. Both these approaches in isolation are often mistakes, which lead to overpaying, not having the coverage you need – or both.\nTaking advantage of available auto insurance discounts is a common practice for some drivers. For others, the concept might be either overlooked or not known at all. Insurance companies want your business.\nThey are, in fact, businesses and need to make profits to succeed. As a consumer, you have the right to not only research the best car insurance prices available but also pursue deals directly, even if by making a direct request. The market is competitive, especially in modern times where a better offer is only one or two clicks away. You no longer must even leave your home to find multiple options for lower car insurance rates today.\nSome automobile insurance providers pursue your business by offering discounts directly to you via email, regular mail, or other marketing methods. Other car insurance companies have multiple discount programs but only offer low rates to qualified drivers upon direct request.\nBundling your car insurance with another policy from the same provider is a common and effective way to reduce your annual premiums. If you already have a home, boat, life, or another insurance policy from a favorite provider, it might be worth it to also add vehicle insurance to your account.\nFor example, Allstate gives discounts as high as twenty-five percent when customers bundle home and auto insurance policies. Farmers discounts auto insurance rates up to twenty percent when bundled with their home insurance policies. Liberty Mutual even allows customers to bundle auto and renters insurance for lower rates.\nBy Admin –", "label": "Yes"}
+{"text": "March 21st, 2012, 03:20 PM\n1966 Ford Mustang GT Fastback for sale -- $31,500 obo\nI am in Fort Worth and have been attending the Plano C&C -- Looking to sell my baby to get another classic. Thought I would post the link to my ad here for anyone interested. I can send hi-res photos on request -- REDUCED TO $30K OBO\nLast edited by decodroid; March 25th, 2012 at 03:21 PM.\nMay 1st, 2012, 09:19 AM\nCar is still available -- When I renewed the ad recently, the link changed. It is now... http://dallas.craigslist.org/ndf/cto/2976834920.html", "label": "Yes"}
+{"text": "When we speak of off-roading, one brand comes to mind too quickly, Jeep. This automobile marque of DaimlerChrysler carries an outstanding reputation for building tough and dependable off-road vehicles since the World War II when it was first used by the US army. The name “Jeep” almost got synonymous with “off-road” that even other vehicles used in farms were referred to as Jeep.\nJeep parts carry the same reputation as well.mulcherparts For such a dependable vehicle to withstand the dangers and difficulties of driving off-road and in worst conditions, highly dependable and hard-wearing parts are needed. Thus, it becomes a constant and rational requirement for a Jeep to have only the best replacement auto parts that could match its impressive off-road driving capabilities.\nKnowing and believing that a Jeep owner deserves only the best replacement Jeep parts, Auto Parts Fast offers the most reliable and complete line of performance auto parts, replacement aftermarket auto parts, and auto accessories for various Jeep models, including the best quality auto parts for Jeep Cherokee, Jeep Grand Cherokee and Jeep Wrangler.\nIt is important to be equipped with wide variety of auto lights when driving off-road. It is not enough to use only your Jeep headlamp and Jeep taillight when traversing uneven pavements, rocky roads or roads with thick snow and mud, especially when the weather is not that good. Your Jeep fog lights can help you cut through thick fog or rain with ease and without temporarily blinding your eyes.\nNow that coldest months are approaching, you should already prepare your Jeep by getting top quality replacement parts should you find parts, especially the lights, not in excellent working condition. While it is true that accidents happen unexpectedly, exerting your best efforts to equip your vehicle can help reduce the risk of meeting damaging, costly and even fatal accidents.\nArticle Source: http://EzineArticles.com/105269", "label": "Yes"}
+{"text": "A car’s usefulness extends well beyond its primary function of going from point A to B. Many car owners do not realize how much their car has grown to mean to them on a daily basis. If your car isn’t functioning properly, you are not the only one who is facing this issue.\nCars often experience jerking when they are put into acceleration. The issue is not limited to airplanes or trains, but may also occur on boats. Everyone agrees it’s risky, but nobody knows why.\nThe most prevalent causes of why is my car jerking when I give it gas and how to fix them are discussed below.\n1. Fuel Injectors\nWhenever there is a problem with a component that regulates the flow of gasoline to the engine, the vehicle will jerk. Since fuel injectors supply the engine directly with fuel, any loss of efficiency due to carbon deposits would be felt. When these components wear down, you may also have engine misfires or stuttering. However, if you get them professionally cleaned on a regular basis, you won’t have to worry about this happening.\n2. Fuel Filter/Pump\nIt’s possible that a blocked fuel pump is to blame for the sluggish or jerky acceleration. If the issue persists after pump maintenance or replacement, you should examine the fuel filter, since the quality of the air entering the engine is also crucial to its ability to accelerate smoothly. One of the most basic and inexpensive maintenance jobs is changing the filters.\n3. Spark Plugs\nThe fuel cylinders’ ignition is facilitated by these little components. Nothing in the engine will function properly if they wear out or become dirty. Once again, a simple solution like cleaning or changing the spark plugs can restore your car’s peak performance.\n4. Catalytic Converter\nThis component is crucial since it helps cut down on exhaust system pollution. Too much gasoline in the air intake may cause the exhaust to back up, which in turn can cause the vehicle to jerk when you step on the throttle. Bad smells and worse gas mileage are further signs of a faulty catalytic converter.\n5. Air Filter\nIf you want to keep hazardous particles out of the engine, then you need to maintain the filters clean. It’s a good idea to check the air filter whenever you change the oil to head off any potential blockages. If this crucial part is overlooked, pollutants may enter the engine and cause damage, lowering the vehicle’s performance.\n6. Airflow Sensor\nIn today’s vehicles, the computer system is more sophisticated, and it employs sensors to monitor and regulate all of the moving components. Failure of other engine parts may be attributed to a faulty mass airflow sensor that isn’t relaying accurate data to the vehicle’s onboard computer. Thankfully, the check engine light will come on if this component is failing.\n7. Damaged Acceleration Cables\nJerking during acceleration and reduced engine responsiveness are also symptoms of a damaged acceleration cable. Having trouble getting your automobile started after sitting idle for a while is a common occurrence known as a cold start.\nInevitably, the cables in your car will wear out and need to be replaced; the owner’s handbook can tell you where everything is and how to get to it if you need to do any repairs.\nInstead of attempting a DIY remedy, you should consult a professional car technician who is versed in these and other complex areas of engine maintenance.\nCabling difficulties might be difficult to troubleshoot if you don’t have experience dealing with HVAC systems since you’ll often need to connect wires between the engine and the body of your vehicle.\n8. Malfunctioning Transmission Control Module\nJerking may also occur during gear changes if the transmission control module is faulty. Check the control module if you experience a jerk while shifting gears in your vehicle.\nThe transmission control module regulates shifting during acceleration, therefore any lags in shifting might result in jerky acceleration.\nEven while this is not the most prevalent cause of a jerking automobile, it is still a possibility.\n9. Moisture on the Distributor Cap\nMoisture building up on the distributor cap might cause jerky acceleration if it’s snowing outside. If you leave your vehicle outdoors during the winter, this is a common problem. Avoid this by leaving your vehicle somewhere with a higher temperature.\n10. Defective Carburetors\nThe carburetor regulates the proportion of gasoline to air before it reaches the engine. Car performance suffers across the board when the carburetor is faulty, but it is more noticeable during acceleration.\n11. Damaged Gas Lines\nUsing gas lines, fuel is distributed to all engine parts. However, if there’s a leak in your gas line, your automobile might lose pressure and jerk. A broken gasoline line may create serious problems, including a possible engine fire. Making sure there are no leaks in the gasoline line should be your top priority.\nCar Jerks When You Accelerate at Different Speeds\nYou can see from the list of possible problems that might occur during acceleration that there are many different causes. By keeping track of at what speed the jerking occurs, you can eliminate some potential culprits.\nThe “why is my car jerking when I give it gas” issue might be due to a number of various problems. This means that the issue that causes your automobile to jerk at low speeds may not be the same as the one that causes it to jerk at high speeds.\nCar Jerks When You Accelerate at a Lower Speed\nThere are several potential reasons for an automobile to jerk at moderate speeds. However, it’s often traced to defective spark plugs, which may be easily replaced. A simple replacement or tune-up should fix the problem fast and cheaply.\nRemember that if you’re driving an older automobile, it might also be due to issues with the air intake, catalytic converter, fuel injectors, or carburetor. When spark plug replacement or maintenance fails to correct the problem, it’s time to move on to the next suspect component.\nCar Jerks When You Accelerate at High Speeds\nWhen an automobile experiences jerking under heavy acceleration, airflow problems are usually at blame. At higher speeds, your vehicle’s engine requires a larger volume of air for combustion. If there’s a problem with the car’s intake system, it won’t be able to provide the engine with enough air to function properly.\nBecause of this, the combustion process will be thrown off, and your engine won’t function correctly. The result is a jerky acceleration and misfires as the engine attempts to get up to speed. If this occurs, you should have the air intake system and mass air flow sensor inspected, and maybe replaced. However, there may be more issues at play here.\nIn any event, if you’re having this problem, you should have your automobile checked right away. When accelerating at high speed, a jerky automobile may be risky to drive since it might cause the driver to lose control of the vehicle.\nCar Jerks When You Accelerate at Constant Speed\nWhether you’re starting off from a complete stop or maintaining a consistent pace, if your automobile jerks when you apply the gas, it’s because it isn’t receiving enough gasoline.\nThis happens when the fuel system is unable to provide a constant stream of gasoline to your engine, as might happen if your fuel injectors are filthy or if there is a problem with your fuel pump. Pulling out of a parking spot or other somewhat routine driving situations will be difficult if your automobile has this problem, adding to your stress levels.\nCar Jerks When You Accelerate in First Gear\n\\What should you do if you feel vibrations in the steering wheel or floorboard while you accelerate, especially in first gear?\nThe failure of the transmission control module (TCM) is the most typical cause of this problem in automatic transmissions. When the TCM, the main computer responsible for determining the optimal shift time, fails, the transmission may shift slowly (i.e. with a delayed reaction) or provide harsh and rough gear changes.\nThough, if you’re a stick shift driver, the fundamental problem might be something else entirely. If the problem disappears when you go to second gear, then it’s probably due to a worn-out clutch. One such possible cause is a malfunctioning pressure plate. Another possible cause is oil getting onto the clutch because of a leaky rear main seal.\nCan I Drive A Car That Jerks When Accelerating?\nYou can, but it’s not recommended. You could still be able to drive the automobile with minimal disruptions, depending on the nature of the problem. The issue should be identified and fixed as soon as possible.\nWe’ve already warned you that this issue might make it difficult to maintain safe vehicle control. The check engine light will likely come on for most of the causes, so you should have your vehicle fixed regardless.\nThe good news is that if you keep up with your car’s regular servicing and maintenance, you may easily prevent this.\nParts that often malfunction and cause misfires are typically repaired or replaced during inspections. Therefore, the “why is my car jerking when I give it gas” issue may be avoided with regular servicing.\nHowever, serious issues like gearbox and catalytic converter problems are more likely to produce jerking under acceleration. We recommend that you take care of these problems immediately, since they are rather critical, and not only because the components are getting close to the end of their useful life.\nInquire as to whether or not any underlying issues contributing to the early failure of the components before proceeding with the repairs. If you don’t repair it, it’ll keep wearing down other parts of your automobile.\nIt’s important to keep up with your car’s maintenance and fix any issues as they arise. An automobile that operates without any hiccups is not only more pleasant to ride in, but also more secure for the driver.\nWhy is My Car Vibrating? : The Rumble in Your Ride\nAs you cruise down the road, enjoying the open air and the freedom of the\nCar Battery Died While Driving: Causes, Prevention, Tips and Tricks\nHave you ever been driving down the road, only to have your car battery die\nDon’t Let Your Car Overheat: Temporary Fix For Overheating Car\nAn overheating car is a common problem that can occur due to several reasons. When\nWhy is My Car Overheating? A Comprehensive Guide to Causes and Solutions\nAs you cruise down the road on a hot summer day, your car suddenly starts\nFirst Oil Change New Car: Everything You Need to Know\nAs a new car owner, you’re probably excited to hit the open road and enjoy", "label": "Yes"}
+{"text": "General Motors (GM) is currently facing financial losses on each electric vehicle (EV) it sells, but the company is optimistic about turning a profit by 2025. Chief Financial Officer Paul Jacobson shared this outlook during a Barclays conference in New York. He acknowledged the challenges the company has encountered in scaling up electric vehicle manufacturing but assured analysts that they have addressed these issues.\nA specific problem mentioned by Jacobson was the difficulty with machinery responsible for stacking battery cells into modules at the Ultium Cells battery plant in Ohio, a joint venture with LG Energy Solution of Korea. Despite these challenges, GM is confident in achieving mid single-digit pretax profit margins in 2025. This projection surpasses the low-to-mid single digits estimated in previous statements, with the improved figure now factoring in benefits from U.S. government clean energy tax credits.\nCurrently, GM reports “substantially negative” profit margins on electric vehicles as it invests in building battery plants, retooling factories, and underutilizing them during the ongoing growth of EV production and demand. Despite a recent slowdown in the rate of electric vehicle sales growth in the U.S., Jacobson emphasized that demand for EVs continues to rise. The company remains committed to its goal of establishing factory capacity to manufacture 1 million EVs annually by the end of 2025, contingent on sustained market demand.\nJacobson emphasized GM’s intention to avoid flooding the market with vehicles that lack consumer demand, expressing a reluctance to offer EVs at significant discounts. The growth of U.S. electric vehicle sales has decelerated, raising concerns among automakers about potential further weakening due to factors such as consumer worries about high prices, a lack of charging infrastructure, and range anxiety.\nGM’s strategy to make EVs profitable involves spreading costs over more vehicles as sales increase, focusing on selling higher-cost/higher profit EV models, and realizing cost savings in battery production. The company is introducing a range of electric SUVs, including the Chevrolet Equinox and Silverado EV pickup truck, GMC Hummer EVs, and Cadillac SUVs, with plans for a new version of the Chevrolet Bolt in 2025.\nIn a related development, GM recently announced a $10 billion stock buyback program and a 33% dividend increase, contributing to a 1% rise in its shares to $31.82 following the news. The company’s strategic initiatives and optimism regarding future EV profitability underscore its commitment to navigating the evolving landscape of electric vehicle manufacturing and sales.\nSource: Associated Press", "label": "Yes"}
+{"text": "For the first time Cadillac XTS made its debut in January 2010 in terms of the North American Auto Show as a luxury concept model XTS Platinum, which in 2012 made it to the conveyor with minor modifications.\nIn July 2016 the Americans have presented an updated version of the model – it passed through the procedure of light “rejuvenation” of appearance, acquired a more expensive interior decoration and obtained an improved multimedia complex, but dispensed with the technical metamorphosis.\nThe exterior Design of Cadillac XTS is entirely subordinated to the “family” style of the brand, which abound with sharp edges and corners, as well as the overall solidity of the body. Overall dimensions of the novelty are as follows: 5131 mm long, 1510 mm high and 1852 mm wide. The gap between the wheel pairs reaches 2837 mm, and its clearance equals 130 mm.\nThe refined interior decoration of the new Cadillac XTS is accomplished in the current style of the American premium brand. The interior flourishes with expensive finishing materials – soft plastics, wooden “decor”, aluminum and leather inserts.\nFive-seated cabin of the new sedan features a welcoming atmosphere and a large supply of free space. Ergonomically designed front seats with unobtrusive support on the sides have a wide range of adjustments and the rear sofa with a welcoming layout is able to comfortably accommodate passengers of any height.\nThe volume of cargo compartment in the “stowed” state equals 509 liters. Second row of seats has a folding backrest, “cut” in a ratio of 60/40, allowing to transport large and long objects. The underground niche “hides” a compact spare tire and a standard set of tools.\nCadillac XTS will be available with 2 petrol units working in conjunction with a 6-speed Hydra-Matic transmission with manual mode and front-wheel drive transmission. Optionally, each of them is combined with a system of all-wheel drive with electronically controlled multi-plate Haldex clutch, responsible for the redistribution of traction between the axes, and the function of the electronic differential lock.\nIn the US Cadillac XTS of the 2017 model year will be offered to customers in 6 modifications: Base, Luxury, Premium Luxury, Platinum, V-Sport Premium Luxury and V-Sport Platinum. “The top” version “sports” with a virtual instrument cluster, 20-inch “rollers”, advanced audio system with 14 speakers, 12.3-inch multimedia display, three-zone “climate”, front and rear parking sensors, etc.", "label": "Yes"}
+{"text": "Intoxicated Driver Kills Another Driver on New Year's Eve - Dallas, TX\nOn the night of December 31, 2020, a vehicle traveling west on Scyene Road t-boned another vehicle traveling south on Lawnview Avenue in Dallas. The impact killed the driver of the second vehicle on Lawnview Avenue. The driver of the first vehicle was determined to be intoxicated and was taken to a hospital for injuries. He was arrested for Driving While Intoxicated.", "label": "Yes"}
+{"text": "By joshsabrina on\n2006 Toyota Sequoia SR5 4dr SUV (4.7L 8cyl 5A)\nExcellent SUV all the way around except fuel economy. If you don't mind paying more at the pump though, this vehicle will make you think you are driving on a cloud. This SUV has the best resale value for the 2005 model for SUV's. Now you can't beat that.\nStyle of vehicle, sound system, safety features, build quality, toyota name, resale value.\nHybrid to improve the fuel economy. Otherwise it is great just the way it is.", "label": "Yes"}
+{"text": "The Jaguar X-Type is an entry-level luxury car that was\nmanufactured and marketed by Jaguar Cars from 2001 to 2009 in a single\ngeneration under the internal designation X400.\nThe smallest of the Jaguar model range, the X-Type was marketed in notchback saloon and estate variants, and was the first estate manufactured in series production by the company.\nThe X-Type was initially offered as all-wheel drive only and mated to a 2.5 litre and 3.0 litre AJ-V6 petrol engine.\nThe Jaguar AJ-V6 engine design is unique to the Jaguar X-Type; one notable addition is the use of variable valve timing. The X-Type's petrol engine is also set apart by the use of SFI fuel injection, four valves per cylinder and features fracture-split forged powder metal connecting rods plus a one-piece cast camshaft and has direct-acting mechanical bucket (DAMB) tappets.\nIn 2003, the X-Type was also offered in front-wheel drive with the introduction of Jaguar’s first four-cylinder diesel engines (based on the Ford Duratorq ZSD unit from the Mondeo and Transit), and with the smaller 2.1 litre petrol V6. The six-speed automatic transmission supplied on the later 2.2-litre diesel models includes Jaguar Sequential Shift.\nThe revised X-Type went on sale internationally during 2008. The facelift featured revised front and rear fascias, new door mirrors with integrated turn indicator repeaters, the choice of a 2.2-litre diesel with particulate filter and a new six-speed automatic transmission with Jaguar Sequential Shift. The range continued to offer the 2.0-litre diesel, and two V6 petrol engines; 2.5 and 3.0-litre.", "label": "Yes"}
+{"text": "Louisville, KY Top Models\nWhen it comes to used and Certified Pre-Owned cars in Kentuckiana, you’ll always find a fair deal at Oxmoor Auto Group.\nWe’ve got a massive selection of quality used cars – all makes and models – plus Louisville’s largest Certified Pre-Owned inventory. Choose from our Top Sellers like Ford Fusion, Ford F-150 or the hottest brands like Mazda and Toyota, or browse our online selection here!\nTest Drive A Top Seller At Oxmoor Auto Group\nThere’s a reason why our top sellers are always so popular – and there’s a reason people in Louisville, Elizabethtown, Jeffersonville choose to buy a used car from Oxmoor Auto Group.\nFill out the form to schedule a test drive in one of our top sellers (or any other model), then get more at Oxmoor today!\n*Trade in allowance is based on KBB “fair” trade value. 2012 or newer excluded. Deductions from allowance may be made for equipment failure, body/interior damage, reconditioning costs and/or excessive mileage. See your participating Oxmoor Auto Group dealership for complete details.", "label": "Yes"}
+{"text": "2018 S5 Sportback Showcased by Audi\nAudi has been known to create benchmarks as far as innovative design and latest technology are concerned. The company recently launched the 2018 S5 sportback model. The model has been very well designed and a lot of features have been borrowed from other popular models of Audi. The car is a combination of a sporty style with efficient cutting edge technology.\nUnder the hood the car has been provided with 3.0 L TFSI V6 engine which throws back a power of 354 HP at 6400 RPMs. It also gives a torque of 369 pound feet at 1370 RPMs. The transmission in S5 sportback has been taken care of by Tiptronic 8-speed automatic transmission which will transmit the power to all the wheels. The agility of the vehicle is improved by the all wheel drive system coupled with self locking centre differential. According to the company the driving assistance system of the car would operate in a better way with electronic gear. The Triptonic gear suits the low-end torque of the engine as well. The top speed rendered will be 155 mph and the time taken by the car to accelerate from 0-62 mph is 4.7 seconds. One of the most notable up gradations which has been carried out in the 2018 Audi S5 Sportback is the increase in its cargo space. It has a space of 17 cubic feet and 46 cubic feet with folded rear seats.\nThe exterior styling and the overall design of the car has remained almost similar to its previous version. There are certain changes which have been done to the grille which has been rendered a more flattered and gaping design. The 3-D LED tail light has been made slimmer. The hoodline has been made longer and lower. The wheel arches have been widened to deck-up the style statement. Changes have also been made to the exhaust tips and the lower diffuser panel at the rear. The car also has a standard panorama sunroof.\nThe design of the interior has been borrowed from S4 and a number of new features have also been added. The cabin has a 3-D outlaying. The Audi S5 has some of the latest features which includes the climate control, the advanced cruise control which has the stop and go feature, the traffic jam assistance system and Audi pre-sense. The car also features the Android Auto compatible Audi virtual cockpit, the MMI touch with handwriting recognition and Apple Carplay as well. The Audi 2018 S5 sportback is a 5 seater vehicle.\nAs far as safety is concerned the car has diagonally spilt and dual circuit braking system. Additional safety features such as the Anti-lock braking system, the Electronic stabilization control with brake assistance, disc brakes at the front and the rear, a tandem brake booster are present. There are 8 air bags. There are airbags both at the front as well at the sides. The airbags deployment has two stages which depend on the size of the person and the strength of the impact.", "label": "Yes"}
+{"text": "800 Derita Road, Ste. A\nA 1968 Chevrolet Camaro RS/SS presented in its factory-correct full red package already has a ton of appeal. But when you can also find a numbers-matching V8 car that has a stick shift and alluring vintage style, well then, you know you've discovered a coupe for true enthusiasts.\nIt's great to find a first-gen Camaro done with all the right factory pieces. After all, the RS hidden headlight front end is a true icon. And the sporty style is continued on the Super Sport pieces like the front air dam, faux velocity stacks, and full-width rear spoiler. Plus, there's the bold white D91 \"bumblebee\" stripe up front. This one is even still wearing its correct 14-inch Rally wheels. Not many Camaros like this retain and wear their history this well. This coupe has spent over half its life with one owner. It was taken care of, and the last time it was given a respray of it factory-correct Bolero Red was about halfway through its life. It gives this coupe an old-school kind of attitude that seems to be lost today. So while there's room in this budget price to do restoration work, we already like this one for its personality it gives off in the first impression.\nThe red interior has a terrific look against the red exterior, and this coupe was born this way. In fact, the full presentation is highly original, right down to the AM radio that's still cranking out tunes. Within the classic style, this remains a terrific driver's machine. That's why you have the three-spoke SS steering wheel, floor shifter, and the deeply recessed gauges. Classic motoring doesn't get any better than rolling down all the windows for the full pillarless hardtop profile (remember they were able to eliminate the vent windows in '68.)\nUnder the hood is the numbers-matching 350 cubic-inch V8. The bold orange on the block, valve covers, and intake have a nice stock look. But there have also been room for the right improvements. Under the polished air topper is a recently rebuilt four-barrel carburetor. And headers let this V8 exhale freely into the dual exhaust. This is the kind of classic that's meant to keep you in touch with the road, right down to the control of the three-speed manual transmission.\nWe love the RS/SS coupes, and this one has extra personality and a terrific price. So you know it's a package that will be moving fast. Call today!!!\nMORE FROM THIS SELLER\nRUSTY RIDES GALLERYView All\nOLDRIDE ANSWERSView All\n- I need to buy a 5 lug 17in. artillery wheel\n- How do I get my avatar uploaded?\n- Has anyone bought a car off of Harwell motors in Texas?\n- My first car was Plymouth Fury. What was yours?\n- What do you think was the ugliest classic car ever designed?\n- We have inherited a field of 26 classic vehicles ranging from 40ish Cadillacs to 60ish Chevs- help!!\n- chevy belair has a miss, running rough\n- Is there a market for a 1959 Ford Escort 2dr station wagon\n- 1964 chevy bel air v6 4 door", "label": "Yes"}
+{"text": "Lone Rider Blog\nMore than just an 1190 Adventure with a bigger engine, KTM has thoroughly revamped the 1290 Super Adventure R. Here we take a closer look at the improvements.Continue reading\nAny ADV motorcycle is worthy of the next adventure, but each excels in its own ways. In this section, we place the BMW R 1200 GS vs the KTM 1290 Super Adventure. Which is for you?\nAfter hours of bickering amongst ourselves, we’ve narrowed it down to our 10 favorite adventure motorcycles that 2019 has to offer.Continue reading", "label": "Yes"}
+{"text": "For Internet Specials, call Dean Larue, Brian Hobock or Eslie Giles at (865) 622-7813 Home » Used Cars » Chevrolet » Impala\nFor Sale: 2014 Chevrolet Impala at Reeder Chevrolet in Knoxville, TN\nReeder Chevrolet is Knoxville, TN's oldest Chevrolet dealership with an unbeatable selection of new, certified pre-owned and used vehicles, in addition to this 2014 Chevrolet Impala 2LT.\nThis used Chevrolet Impala has a stylish 2LT trim design, 3.6L DOHC V6 DI Engine engine type, Summit White color, and a Sedan 4 Dr. body style. Not exactly what you're looking for? Let us find it for you! At Reeder Chevrolet, we work hard to help you find the vehicle to fit your lifestyle and personality. One look at our fantastic selection and you'll understand why we are trusted as a premier Knoxville Chevrolet resource! Calculate monthly payments and make sure to pre-qualify to see what Chevrolet Impala lease specials and finance options are available to you.\nProduct ID: 2G1125S36E9205606\nReeder Chevrolet works hard to make sure that the pricing on each vehicle is correct and accurate. The information on our site comes from multiple data sources and Reeder Chevrolet is not liable for any pricing errors caused by those data sources or any other method. Prices do not include tax, title, license, additional fees, costs of closing, finance charges, or any dealer documentation fees. Not all customers will qualify for special pricing, APR's, leases or regular financing and it is the customers responsibility to contact the dealer for information regarding their qualification. Call %SALES% or visit Reeder Chevrolet for the most current and accurate information.\n*EPA Estimates Only\n© 1989-2014 Chrome Systems Corporation", "label": "Yes"}
+{"text": "- October 2019 Cash for cars Update\n- May cash for cars pricing.\n- April cash for cars. $130/ton+\n- Cash for cars Riff Raff Video\n- Junk car outlook for Indianapolis 2019 outlook\n- A story about a little tow truck that could.\n- Junk cars and junk yards update for September!\n- Plainfield Indiana and Hendricks County Residents we have Cash for Cars!\n- Back on tibbs.\n- Cash for cars out West of Indianapolis\n- cash for cars\n- cash for junk cars\n- cash for luxury cars\n- Indianapolis cash for cars\n- johnson county\n- Junk Car Removal\n- junk cars\n- Junkyard used auto parts special of the day.\n- places that buy junk cars\n- Used auto part\n- we buy junk cars\nTop Posts & Pages\nCars is all we know.\nTag Archives: junk cars\nCash for junk cars Brownsburg Lets just take a moment and admire Brownsburg, IN OH YES, we are paying top dollar for running and driving cars located in Brownsburg, IN. We will head on over and buy that car of … Continue reading\nCash for cars and cash for junk cars. Greenwood Southport, Whiteland, Johnson County Well we are buying in all areas but we are especially paying top dollar cash for junk cars Greenwood. We are towing 24 hours a day in … Continue reading", "label": "Yes"}
+{"text": "I couldn't disagree any more with the two previous reviews. I purchased a Range Rover Sport from Abdul at Specialized Sales and Leasing. Abdul was fantastic to work with. The Rover looked and performed like it was brand new. I even verified with Rover of Center ville the history of the vehicle and service that Abdul described. Very satisfied with the price as well as the trade in deal he made. I don't generally like the car buying experience. This was a 10 out of 10! No BS when the final price was quoted like many dealers try. Two weeks ago I saw he had a pristine, low mileage Maserati Quattroporte Executive GT on his lot. Once again I checked Car FAX as well as with service at Steve Harris Imports. Abdul completed a $3,000 service that was due on the car. I traded my G500 in on the Maserati. Couldn't be happier! I always check things out extensively before I buy anything. I got two pristine cars at a better price than I found on the internet! Sure they have some cars that have higher miles and not \"good as new\" , every dealer does. Many consumers prefer lower priced, high mile cars. I found most of his cars to be very very nice and all I looked checked out on car FAX as well as with local dealers. I have recommended them to many friends. I am a picky buyer and two cars later I couldn't be any happier with Abdul and Specialized Sales. :-)\nI called about a 06 GMC Sierra Denali they had for sale and talked to Jennifer. She gave me great information on it and cleared up why there was an owner for just month on the carfax and made me even more interested in the truck. I told her that I was a little upside down on my trade and I wanted a rough estimate on what they could give me. I texted her information about my trade and gave me a range of possibilities until they saw the car in person. They offered me above the suggested value of my trade. I went that day to just look and Jennifer gave me such a great deal on my trade and a great deal on the truck I ended up buying the same day. There was no pressure to buy or the typical \"it could be gone tomorrow if you don't take it now\" lines like other places. The finance guy, Tony, was amazing and went through step by step to explain everything that was happening and answered all the questions I had. They added what I owed on my trade to the truck no problem and I was out the door in a couple hours with the truck. They made me feel important even though I wasn't there to buy one of their high end Porsche's, Audi's or Range Rover's in the showroom or the lot. I still felt like I mattered just as much. I was so impressed by RC Automotive, if I ever need a vehicle again I will go there first no questions asked.\nMy experience at Auto experts of Utah was phenomenal! my salesman; Gus and Adam** was well educated and very informative about the different vehicles I test drove. Although purchasing a vehicle is known to be a long drawn out process; I didn't feel stressed out one bit. Gus and Adam made me feel comfortable and was very accommodating. I test drove at least three cars before I found the one I wanted. Nevertheless, they were more than happy to grab each car with a smile. When it was time to purchase the vehicle Will ** worked with me. He made the financing easy to understand and made the process pretty painless. He didn't pressure me into any additional services/ warranties but taught me the importance of the warranty and what it covers. Which was a great deal. It was such a pleasure working with this dealership. In fact, my boyfriend came back a few days later and traded his car in! We saw Gus again because of course he was AWESOME last time! Will ** did his financing and we experience the same level of professionalism that Will offered. I really can't say one bad thing about this dealership or their employees. All I can say is I never write these reviews but I truly felt the need to express my experience. If you haven't visited Auto experts of Utah what are you waiting for? You won't regret it.\nI was so satisfied with my car purchase that I bought the first time, I knew that this was the dealership to go to for my second car buying experience. I had such a great rapport with this place that I had to come back to buy my second car from First Class Cars. The customer service there is surpurb and they always treat you like they are family and I always walk out of there feeling like I made the best decision on my car buying needs. I know that when I'm getting a car from this dealership, that it has been looked over and serviced with the best of intentions. I wouldn't choose any other car dealer in town, specially in Salt Lake because of the great experience that I've had in past years. Making payments are easy, and they work with you and your needs when it comes to financing. Being able to talk to somebody on the phone is hassle free and being able to have a personal one-on-one conversation about potential cars was a breeze, there was never a feeling of getting the runner round and I felt like I was getting the best deal for my financial situation. They like to work with you and put you in the car that would really suit you and that you know when you walk out that door that you will be happy with. Overall I think that this is a great company and I recommend it to everyone.\nI was referred to Car City. A friend of mine got an awesome car here so I wanted something similar. I was impressed by the huge selection of cars, but more than anything else by all the available information these guys gave me at the moment of the purchase. They reviewed with me the entire history of the cars, we took them for test drives, and they even allowed me to take it into my own mechanic. Great service! I felt they were being honest from the very moment they were willing to show me the title's history and let me take it to a mechanic of my own choice. Other dealers were pushy and were uncomfortable with it when I asked for that. Anyways, the bottom line is the car. I got a Nissan Altima 3.5 and I am so glad I did. The car have been running great (I have been with the car now for over 6 months), I can always trust it, and I know I will be able to sell it at a good price next year when I get my car upgrade. No doubts that I will go back to Car City to get a new vehicle. Also, I referred my aunt there. She got a Mazda 3 that have been fantastic for her and Car City gave me a thank you note of $100! So get your car there, you will be totally satisfied, and refer your friends. you will get cash =) Car City is awesome!!!!\nI saved all my pennies and started to look for a car. I watched the Internet, checked local dealers and drove to Utah Valley a few times to test drive cars from multiple dealers including a dealer where family worked. This went on for over 2 months, test driving FILTHY, abused used cars. I was getting frustrated and decided to check out a few cars that I had seen online in SLC. The last car was at RC Automotive! The sales man was like talking to a buddy. No pressure, supper nice and HONEST. It was weird to be dealt with honestly after having your relative, hours earlier, try to wheel and deal you. The car i test drove was SUPPER CLEAN! No broken parts or pealing off finishes. It looked great, a1000x's better than anything else I had seen at other dealerships and most of them cost more! I took the car home and the next day the check engine light came on. I called RC Automotive about the problem. They said they would take care of me and they did! Instead of having me drive 3 hours to their shop, they got me set up with the local Chevy shop and fixed everything for me. It was so nice to deal with people that have integrity and really care about their customers, no matter how little they have to spend.\nI'm not an inexperienced first time buyer and I have a checklist that I follow when I buy a used car. Here's a link that covers what I normally check for: http://artofmanliness.com/2010/04/11/how-to-buy-a-used-car/ But when you buy an \"as is\" 10+ year old car, even a detailed check list isn't a guarantee that you won't have problems, even soon after purchasing a car. The only thing that will save you in this situation is the car dealer's good sense. I found a 2001 Audi A6 on KSL that looked to be in great condition and was a fair price. I went to Car City to check the car and it passed my checklist. However, just over a week after buying the car, the blinker stopped work, even though the emergency lights was working, I looked online and seemed it was a normal problem with A6s, and to buy it online was $71.00. I called Car City and they told me to bring it in and that they'd take a look at it. Matt, the guy that sold the car talked if the owned and get a approval to fix it for free and I was very happy with their follow through customer service. A lot of dealerships don't care after they've made the sale.\nOverall, I had a very positive experience with Prestman Auto. I am a very particular buyer, and ask a lot of questions and also take my time before making a decision. Not a single person at Prestman was pushy or tried to pressure me. I worked primarily with Alec Flitton who was patient and very responsive. Toward the end of my nearly 3 weeks of deciding, I also worked with Tracy Ball who helped finalize all of the paperwork. What I find most refreshing is that neither Alec or Tracy tried to sell me anything. They were there to answer questions and help you test drive as many cars as you want as often as you want. I also appreciated that they were upfront about the cars and the Prestman \"vision\" and business model of selling only branded vehicles. I am a big believer in branded title vehicles so I knew what I was getting into. With that said, it's important to me that the cars I buy have no frame or engine damage. Luckily, Prestman does not sell branded titles with frame or engine damage, so you know you're getting an especially good deal. In the end, I was very happy I chose Prestman and will definitely be back.\nI was recently in an accident and had some major damage to my VW Passat. Which I dearly love so I asked around and was told to go to Schneider Auto. I was going to go to more than one shop to see about pricing and workmanship. I went to Schneiders and I was greeted by friendly and helpful people. I was offered something to drink and was treated very fairly. Every step of the process was explained to me and what would need to be done in order to have my car looking like it did before the accident. I was totally sold on them and left my car with them that day. They helped to put me into a rental and get me all taken care of they worked with my insurance and made me feel like my baby was in very good hands. I then picked up my car a day early and they had gone the extra mile in going around and fixing a couple of scratches that were there and not related to the accident and made my car look better than before the accident. I want to thank the very nice people at Schneider Auto for making this a very easy and pleasant experience. I have and will continue to recommend them to anyone in need of car repair.\nBest Car Purchasing Experience Ever. Finding a car had been a very difficult task for me. I was trading in my vehicle and was determined to get top $$$ out of it...Everywhere I looked I was getting low-balled and given terrible deals on the car's I was searching for. After many attempts to find a dealership that would work with me, I finally had arrived to RC automotive and was lucky enough to work with Brett Duncan. We talked about what I was interested in and the trade-in value of my truck. The first offer on my trade was nearly $1,500 greater than any other dealer had offered. They did not have anything that I was interested in stock, so Brett went out of his way for 2-weeks looking for the right car for me. He was very prompt in keeping me updated with what he had found and was able to find get a killer deal on exactly what I wanted. He was able to get everything set-up, got the car inspected, detailed, and made sure that it was good to go out the door. This is by far the best dealership that I have ever worked with, make sure that you ask for Brett, he will take care of you!", "label": "Yes"}
+{"text": "- Hybrid Electric Vehicles\n- Transportation Efficiencies\n- Plug-In EVs\n- CAFE Standards\nFord CEO’s 'Perfect' Comments in Context\nThe potential softening of US Corporate Average Fuel Economy (CAFE) standards that has been discussed of late has reignited the debate about consumer acceptance of electric vehicles (EVs). Under current regulation, EVs are crucial to automaker compliance strategies, but not all EVs are the same, nor are they treated similarly under the regulations. It’s an important aspect to clarify here as the debate about CAFE standards questions whether there is enough consumer demand for EVs to enable automakers to meet the standard’s targets. The administrators of CAFE, the Environmental Protection Agency (EPA), suppose it does, but some in the automotive industry disagree.\nThe most recent commentary provided to the debate was by Ford CEO Mark Fields, which Business Insider claimed “just perfectly summarized the biggest problem for electric cars.” Fields, in arguing there is not enough EV demand stated: “In 2008, there were 12 electrified vehicles offered in the U.S. market and it represented 2.3 percent of the industry … fast forward to 2016, there’s 55 models, and year to date it’s 2.8 percent.”\nHybrids and Plug-Ins\nFields’ data point deserves some deeper analysis. In the automotive industry, the term EV or electric car encompasses hybrids, plug-in hybrids (PHEVs), and battery electric vehicles (BEVs) because all these vehicles use electricity either harvested from vehicle braking and/or from the grid for traction. Within the design of current regulations, PHEVs and BEVs are heavily incentivized and provide far more benefit to automaker CAFE compliance strategies than do hybrids (though hybrids are an important component).\nFields’ statement is accurate when considering the entire pool including hybrids, but it does not address the demand of plug-in vehicles specifically, around which most of the debate has centered. To start, the laggardly market growth for EVs over this time period is specific to hybrids, which have contracted from the 2008 2.3% figure to 2% year to date. Of note, a vast majority of sales come from one automaker (Toyota). Meanwhile, plug-in (BEV and PHEV) sales started in 2011 and now have over 0.8% of the market year to date, and there is no one consistent or dominant market leader. Lumping all EVs together in regards to CAFE compliance is inexact when automakers are generally complaining about the requirements for plug-in EVs, which are in reality gaining market share and increasingly common among automaker portfolios, and are the vehicles which are most critical to automaker compliance.\nReasons for Decline\nGiven that, there are many reasons hybrid share may be in decline. One that usually gets a lot of attention is oil prices, which not only historically reduces sales of hybrids, but also has prompted a growing percentage of new vehicle sales to be SUVs and trucks (a market nearly devoid of hybrids) and fewer passenger cars. Another factor is the increasingly more fuel efficient non-EVs (due to CAFE standards), but the last and more critical reason is competition from the plug-ins themselves. Before the plug-ins arrived, hybrids were the energy efficiency leaders. Since plug-ins arrived, sales have arguably taken away from hybrids, and the impact to the overall hybrid-inclusive EV market has been relatively marginal in growing sales, which fuels the arguments for those who are critical of consumer demand for EVs.\nUltimately though, the feasibility of automaker compliance with current regulation hinges on consumer acceptance of plug-ins, not hybrids. To that effect, Fields’ data in relation to consumer demand and CAFE compliance is not perfect. Hybrids and other fuel efficiency technologies are certainly helpful but cannot be relied upon in isolation. Consumer response to battery cost and energy density improvements teased by the Tesla Model 3 and represented in the near-term BEV rollout of the Chevrolet Bolt will provide greater clarity here. However, regardless of the success these models may realize or have already realized, it is unlikely to have a significant impact on whether CAFE standards will be softened or not.", "label": "Yes"}
+{"text": "Tradebit merchants are proud to offer auto service repair manuals for your Chrysler Panel Cruiser - download your manual now!\nFor over 60+ years, Chrysler has been known for building good automobiles including the 153 horsepower, 1982 Chrysler New Yorker Limited Edition and the 2004 Voyager 2.2 CRD Touring. Chrysler cars are much easier to maintain and repair with you have a Panel Cruiser repair manual. Check out the full list of Chrysler manuals from Tradebit.Complete list of Chrysler Panel Cruiser auto service repair manuals:\nSearch by year:\nTradebit is the worlds largest marketplace for digital files, with over 2.5 million satisfied customers and millions of digital products. Online for over 12 years, Tradebit is the best place to find files like music, video tutorials, repair manuals, and more. If you're curious about how much our users love Tradebit, read reviews from real buyers!", "label": "Yes"}
+{"text": "Mitsubishi Used Car Range\nA compact runabout that's economical to run and easy to park, so it's made for the city.\nOur compact SUV is both practical and economical, so it fits every aspect of your life and your budget.\nOur mid-sized sporty SUV has category-defining looks that make a bold statement on the road.\nA spacious, versatile SUV that's perfect for families and fully equipped to cope with modern life.\nThe world's bestselling plug-in hybrid SUV will reduce your running costs and has superb off-road credentials.\nThis popular pickup truck is built to move, carry and climb and will withstand the toughest conditions.\nThe Shogun DNA lives on in this all-new 4X4. Tackles anything from urban streets to the harshest terrain.\nThe original, advanced SUV that offers a performance that’s been proven the world over, from the equator to the arctic.\nA 100% electric car, producing zero CO2 and a tight turning radius of 4.5 meters – making it perfect for the city.\nA great compact car, which is easy to park and easy to drive. Equally at home in city streets or zooming along country roads.\nLaunched in 1973, this rally-winning car was produced up until August 2017, but there are models out there that are as good as ever.\nPre-owned Outlander PHEV 4H Offer", "label": "Yes"}
+{"text": "Toyota still struggling to manage its reputation, Alva In Sight monthly analysis reveals\nLondon, UK. 10th May 2010: Despite a busy period of financial reporting, Toyota recalls continued to dominate the headlines during the month of April, according to the latest Alva Automotive In Sight Analysis. Each month, corporate reputation analysis company Alva reports on the biggest issues in the Automotive industry in terms of traditional media coverage and social media chatter using information collected from its daily Alva Automotive In Sight service.\nToyota’s Sequoia and Lexus GX460 recalls were the single biggest stories of the month, with more than double the impact of hydrogen fuel’s fightback in the green car race (in second place) and the sales and financial reporting of Toyota and Ford (third and fourth respectively).\nOverall, Toyota also topped the league table of car manufacturers dominating the news and online discussion with a 15% share of overall coverage, followed by Ford with 6% and General Motors with 5%.\nThe biggest industry issues in the automotive sector were slightly more evenly spread with sales taking 17% of all coverage, while safety and corporate issues each took 16% of the conversation.\n“In what is typically a massively important month for sales and financial reporting in the automotive industry, Toyota still managed to dominate the headlines and online discussions. Despite its textbook handling of what were fairly routine recalls this time, the media scrutiny of Toyota means that it continues to be associated with negative product recalls.” said Alberto Lopez, CEO of Alva. “These results demonstrate the media and wider industry’s continued hunger for this safety story. The implication for Toyota’s corporate reputation looks to be severe and long-term and the potential for this negative coverage to contaminate other automotive brands is quite clearly present in the market.”\nTop 10 Manufacturers by Media and Social Media Chatter in April 2010\nTop 10 Issues in April 2010\nToyota Sequoia and Lexus GX460 recalls\nHydrogen fuel to fight back in green car race?\nToyota rises most in seven weeks after report on profit\nFord Q1 profit expected, focus now sustainability\nAA patrol staff to go on strike over pensions\nToyota pays US record fine, announces Lexus recalls\nToyota issues stop sale on 2010 GX 460\nReport: Ford becomes top-selling brand in Europe\nFord technology a hit with younger consumers\nPetrol prices hit record high\nAlva specialises in analysing corporate reputation and reputational risk. Its services allow organisations to build reputational risk assessment, and analysis into their day-to day business processes to ensure reputation is managed in the same way as any other valuable business asset.\nAlva’s services are industry sector specific. Reputation analysis services for the automotive industry are already being delivered with services to the energy and utilities and financial services communities following shortly, with 32 industry sectors planned in total.\nAlva’s Board of Directors consists of industry experts with extensive first-hand experience in managing reputation at PLC level. Alva Chairman Andrew Vickerman is the former Corporate Affairs Director at Rio Tinto. Serving as Non-Executive Directors are Alan Schofield, Former Press Secretary to Deputy Prime Minister John Prescott and Mark Rigby, Director of Corporate Affairs at Sainsbury’s PLC.\nTel: +44 (0)7770 828525", "label": "Yes"}
+{"text": "67839 Beaver Loop Road\nN. Bend, Oregon 97459\nVisit Our Website\nThe prime mover behind the Grand Touring Garage is an unassuming bearded fella by the name of Philip Koenen. But lurking behind that \"professorial\" visage is a guy whose motorhead creds are about as broad and diversified as you can imagine.\nYou see Philip is equally comfortable working on restoring a Dusenberg as he is a fire breathing muscle car. Whether it's a pampered concours trailer queen or an all out race car, Philip and his crew have you covered. And going way, way above and beyond customer expectations is the Grand Touring Garage's abiding ethos. Total builds, in house restoration, finely tuned fabrication, these are the \"driving\" forces behind the shop.\nThe bigger the challenge the better. Grand Touring will work on darn near everything that rolls: 2 wheels or 4, Muscle, Classic or Custom, the 1930's to the present. All marquees have rolled though their doors and have been given their world class treatment. If pure racing is your thing, Grand Touring has built Open Wheel and Trans Am cars, restored and rehabbed classic and race bikes as well. Their fully equipped shop, a 6,000 square foot facility allows ample room for even the biggest ideas to come to fruition. Grand Touring .... a fine tuned shop dedicated to making dreams come true across the whole broad spectrum of motorhead mania!Read More", "label": "Yes"}
+{"text": "Volvo 240 Turbo For Sale - Used volvo 240 glt turbo sale - cargurus, “91 volvo 244 turbo ” 194k miles, m47 tranny, rwd brick. it used to be a boring car until: swapped a b230ft in it and added 19t turbo @ 14 psi, 3\" downpipe, 2.5\" exhaust, flow master 60, 3\" amm, all aluminium intercooler, 55 lb injectors, msd blaster coil, k&n cold air intake, chipped ecu/icu, full ipd suspension, it goes on and on these cars have tons of potential.. Used volvo 240 sale - carsforsale.®, Find 17 used volvo 240 as low as $15,000 on carsforsale.com®. shop millions of cars from over 21,000 dealers and find the perfect car. menu. search millions find one welcome to carsforsale.com used volvo 240 for sale by year. 1993 volvo 240 (6). 50 volvo 240 sale, savings $3,179, Here are the top volvo 240 listings for sale asap. check the carfax, find a low miles 240, view 240 photos and interior/exterior features. search by price, view certified pre-owned 240s, filter by color and much more. what will be your next ride?. Volvo 240 turbo | ebay, Find great deals on ebay for volvo 240 turbo. shop with confidence. skip to main content. ebay logo: volvo 240 rare volvo 240 wagon volvo 240 turbo kit volvo 240 parts volvo 240 glt volvo 240 nos volvo 740 turbo volvo 240 turbo manifold volvo 240 gauge volvo 240 turbo used parts volvo 240 exhaust manifold volvo 240 intercooler. include. Used volvo 240 sale los angeles, ca: 13 cars , Search used volvo 240 for sale in los angeles, ca to find the best deals.. Volvo 240 turbo wheels cars - trovit, Find volvo 240 at the best price. we have 60 cars for sale for volvo 240 turbo wheels, from just $500. Used volvo 240 glt turbo sale: 13 cars $1,400, Search used volvo 240 glt turbo for sale to find the best deals. iseecars.com analyzes prices of 10 million used cars daily.. Volvo 240 sale los angeles, ca - carsforsale.®, Find 21 volvo 240 as low as $15,000 on carsforsale.com®. shop millions of cars from over 21,000 dealers and find the perfect car. menu. search millions find one welcome to carsforsale.com volvo 240 for sale in los angeles ca by year.. Volvo 240 sale / find sell cars, trucks, , You can find 616 used and new volvo 240 cars for sale here. any super charged, turbo, diesel autos, as well as volvo 240 auto parts..\nUsed volvo 240 glt turbo for sale cargurus → Used volvo 240 for sale carsforsale® → 50 best used volvo 240 for sale, savings from $3,179 → Volvo 240 turbo ebay → Used volvo 240 for sale in los angeles, ca 13 cars from → Volvo 240 turbo wheels used cars trovit → Used volvo 240 glt turbo for sale 13 cars from $1,400 → Volvo 240 for sale in los angeles, ca carsforsale® → Volvo 240 for sale find or sell used cars, trucks, and →", "label": "Yes"}
+{"text": "The Porsche 911 GT3 RS (991.1) is a rear-engined supercar that acts as the track-focused version of the Porsche 911 GT3 (991.1).\nLaunched at the 2015 Geneva Motor Show, the Porsche 911 GT3 RS (991.1) is the RS version of the 991.1 GT3.\nThe 991.1 GT3 RS's front fenders are equipped with louvers above the wheels and the rear fenders feature air intakes similar to those of the 911 Turbo (991.1), rather than an intake below the rear wing. Magnesium was used to make the roof. The 991 GT3 RS's interior features full bucket seats based on the Porsche 918 Spyder's carbon seats, carbon fiber inserts, lightweight door handles, and the Club Sport Package as standard: a bolted-on roll cage behind the front seats, preparation for a battery master switch, and a six-point safety harness for the driver and fire extinguisher with mounting bracket.\nThe Porsche 911 GT3 RS (991.1)'s engine is a new 4.0 L (4,000 cc) naturally aspirated flat-6 engine producing 493 hp (368 kW) at 8,250 rpm and 339 ft·lb (460 N·m) of torque at 6,250 rpm. The 991.1 GT3 RS comes with only a seven-speed PDK transmission.\nThe Porsche 911 GT3 RS (991.1) is capable of 0-62 mph (0-100 km/h) in 3.3 seconds and a top speed of 196 mph (315 km/h).\nIn 2018, the 991.1 GT3 RS was succeeded by an updated 991.2 GT3 RS variant, which obtained a lap time of 6:56.4 at the Nürburgring-Nordschleife circuit. This GT3 RS is the second highest-performing road-going 911 model in existence, only behind the twin-turbocharged 911 GT2 RS (991.2).\n(Bold numbers are provided in-game, others are calculated. Last checked: Sep 14, 2020.)\n|BHP||367.63 kW (499.84 PS)||493.00 hp|\n|Acceleration||3.11 s (0–100 km/h)||2.97 s (0–60 mph)|\n|Weight||1,560.00 kg||3,439.17 lb|\n|Torque||459.00 N⋅m||338.54 lbf⋅ft|\n|Top speed||243.26 km/h||151.16 mph|\n|NOS torque||40.00 N⋅m||29.5 lbf⋅ft|\n|NOS time||1.50 s||1.50 s|\n|Porsche 911 GT3 RS Blueprint – Last checked: Sep 14, 2020|\nSale value: 10,500\nRarity: Blue (Class A)\nVehicle: Porsche 911 GT3 RS (8 to claim)\nAvailability: Gift Boxes\nStatistical drop rates: 0.00 % | 1.02 % | 2.16 % | Chance Promo: 33.33 %\nThe blueprint has its own Chance Promo with a limited-time Gold Gift Box Porsche 911 GT3 RS † that promises a \"10x chance\" of getting the blueprint. Results of WikiProject Statistics delivered a relative frequency of 33.33 % which means that the probability of getting the blueprint from this box is 100 %. See the box page for more details.\n|8 x 10,500||84,000 ✔|\nThe Porsche 911 GT3 RS was added in the Porsche Update as one of five Porsches in the Porsche Motor Series. Within the sequence of five special events, the Porsche 911 GT3 RS was unlockable via an R&D event.\nThe Porsche 911 GT3 RS is a mid Class A car with the following ranks statistics:\n- Starting rank: 1360\n- This was changed to 1251 in the ? Update\n- MAX rank: 1566 (+206)\n- MAX+PRO rank: 1697 (+131)\n- Tuning Kit bonus: +46\n- Stock to MAX+PRO rank difference: 337\n- Nitro Efficiency: 7/12/15\nAs of the 2021 Spring Update, the 911 GT3 is now a low Class B car with the following statistics:\n- Starting rank: ?\n- MAX rank: 1425 (+?)\n- MAX+PRO rank: 1590 (+165)\n- Tuning Kit bonus: +?\n- Nitro Efficiency:\n- This section of an article is missing some information. Please try to add some relevant content.\nThe Porsche 911 GT3 RS is a highly nitro-focused car, like all of the Porsche cars introduced during the Porsche Update. It has the largest nitro stat in all of Class A. However, the Porsche 911 GT3 RS gains more speed from raw top speed upgrades rather than nitro upgrades and has a lower upgrade rank weighting on its raw top speed as well, making it highly favorable to upgrade raw top speed alone for better performance in Multiplayer.\nAt MAX + PRO, the Porsche 911 GT3 RS closely rivals the Lamborghini Sesto Elemento, Ferrari LaFerrari, Lamborghini Asterion, Zenvo ST1, and McLaren P1™. The Porsche 911 GT3 RS lacks partially in total top speed, due to having a large nitro. On the other hand, it does have superb acceleration due to its large nitro, as well as excellent handling and drifting, making it nimbler than its competitors. Compared to the McLaren P1, the Porsche 911 GT3 RS' handling and drifting are much more responsive and occur nearly instantly, as opposed to having a short delay between activation and response. However, the Porsche 911 GT3 RS only has a nitro efficiency of 7/12/15, which is good, but not as good as the 5/10/15 of the McLaren P1 (and Lamborghini Asterion).\nThe Porsche 911 GT3 RS awards 2 Champion Kit Boxes (60 cards in total) in Car Mastery Challenge 5 (required rank 1416), making it the first car in the game to award multiple Pro kit boxes in Car Mastery instead of just one. This is the Porsche 911 GT3 RS's best use to date.\nIn TLEs, the Porsche 911 GT3 RS can compete well in the mid-end Class A bracket, which includes the following cars: Lucra L148, Ferrari FF, Jaguar C-X75, Ferrari LaFerrari, Lamborghini Asterion, Porsche 911 GT3 RS, McLaren P1, and Mazzanti Evantra. In this bracket, the Porsche 911 GT3 RS competes as the tied second-best car, alongside the McLaren P1. However, the Lamborghini Asterion is superior to both cars. Also, the Porsche 911 GT3 RS is significantly more expensive to upgrade than the McLaren P1, so it's generally easier to use the McLaren P1 instead of the Porsche 911 GT3 RS.\nThe Porsche 911 GT3 RS is also featured in a higher-tier bracket which includes the following cars: RUF RT 12 S, Ferrari FF, Lamborghini Asterion, Porsche 911 GT3 RS, Mazzanti Evantra, Savage Rivale GTR, Nissan GT-R Nismo, Lamborghini Aventador LP 700-4, and Sbarro Alcador. The Porsche 911 GT3 RS is much less effective in this bracket.\nIn Multiplayer, these tunes are decent, to some extent, but aren't extremely competitive:\n- MAX 0505 + PRO 5555 - 279.5 mph (450.1 km/h) with a raw top speed of 226.3 mph (364.4 km/h) @1625\n- MAX 0504 + PRO 5050 - 266.2 mph (428.7 km/h) with a raw top speed of 226.3 mph (364.4 km/h) @1535\n- MAX 0500 + PRO 5050 - 254.2 mph (409.4 km/h) with a raw top speed of 226.3 mph (364.4 km/h) @1484\nThe Porsche 911 GT3 RS was first unlocked via Research & Development. It must be assembled with 45 of its common-rarity Blueprints, all of which are obtained throughout the R&D. The car's hidden buying price is 3,500. Assembly takes 3 hours and can be skipped for up to 232.\nFor a limited time, it was possible to purchase Porsche 911 GT3 RS Full BP Pack, which contained all 45 Blueprints required to build the 911 GT3 RS, at a cost of 6,500, 3,000 tokens higher than the hidden purchase price.\nAs of the Sixth Anniversary Mini Update, the car no longer requires Blueprints to be assembled and has a full purchase price of 3,500.\nThe Porsche 911 GT3 RS is obtainable by reaching Tier 14 with the Premium upgrade in the Porsche 911 GT1 Evolution Festival. Players who already own the car would win 5x Porsche 911 GT1 Evolution Kit instead.\nThe Porsche 911 GT3 RS was made obtainable by reaching page 8 in the Neon Season. The car costs 8 to buy. Players who already owned the car would get 10x Class B Upgrade instead.\nThe Porsche 911 GT3 RS counts towards to the Porsche collection.\nResearch & Development\n- Main article: Research & Development/Porsche 911 GT3 RS\nThe Porsche 911 GT3 RS R&D event was the third event released as part of the Porsche Motor Series on June 23, 2017. The event has a total of 50 Tests spanning 4 Labs with a time limit of 14 days once the event is started.\nThe event was revived on the following dates:\n- September 20, 2018 (in the Fifth Anniversary Update as part of the Porsche 70th Anniversary Motor Series)\n- March 21, 2020 (as part of the 2020 Spring Update's Asphalt Moments series)\n|Research & Development|\n|Events||Lamborghini Huracán • Lamborghini Egoista • Peugeot SR1 • ED Design Torq|\nAlfa Romeo 4C (September 2016) • BMW 3.0 CSL Hommage • Mosler Super GT • Mercedes-AMG C 63 Coupe Touring Car 2014 • W Motors Fenyr Supersport • GT by CITROEN • Arash AF10 • Renault Alpine Celebration • Lotus Evora Sport 410 • Porsche 911 GT3 RS • KTM 1290 Super Duke R • Ducati SuperSport S • Peugeot RCZ R • Suzuki Hayabusa • McLaren 650S GT3 • Pagani Huayra BC • BMW S 1000 RR • Audi R8 e-tron Special Edition • Yamaha YZF-R6 • Apollo Intensa Emozione • Rimac Concept S • Mazda RX-8 Special Edition • Zenvo TS1 GT 10th Anniversary Edition • Maserati Alfieri • Aprilia Tuono V4 1100 RR my2017 • Mercedes-Benz SLS AMG Coupé Black Series • Hyundai i30 N • Lamborghini Centenario • Infiniti Vision GT • Nissan 370Z Special Edition • Ducati XDiavel S • TVR Sagaris Special Edition • BMW i8 Coupe • Zeus Twelve Sigma • Ferrari F60 America • Rezvani Beast X • Pininfarina H2 Speed • McLaren 600LT • Aston Martin Vantage 2018 • Ford GT 2017 • Koenigsegg Regera • Infiniti Project Black S • Pontiac Solstice GXP • Rimac C Two • Acura NSX GT3 Evo • Lamborghini Aventador SVJ • Aston Martin DBS Superleggera • Ferrari 812 Superfast •\n|Enduro Double Down|\n|Event||Boss Vehicle||Other Enduro Vehicles|\n|Weber Faster One\n||Weber Faster One||SRT 2013 Dodge Challenger SRT8 • Jaguar F-Type R • Nissan Skyline GT-R (R34) • Honda Integra Type-R • Nissan GT-R NISMO • Lamborghini Aventador LP 700-4 • W Motors Lykan HyperSport • Chrysler ME412|\n|Aston Martin One-77\n||Aston Martin One-77||AC 378 GT Z • Aston Martin DB9 Coupé • Aston Martin V12 Zagato • Aston Martin V12 Vantage • Lucra L148 • Bentley EXP10 Speed 6 • Pagani Huayra • Peugeot Onyx|\n|BXR Bailey Blade GT1\n||BXR Bailey Blade GT1||Alfa Romeo MiTo GTA • Mazda 6 • Ford Focus RS • Mitsubishi Eclipse • Nissan GT-R (R35) • Holden Coupe 60 • Dodge Viper SRT10 ACR-X • Mazzanti Evantra|\n|Icona Vulcano V12 Hybrid\n||Icona Vulcano V12 Hybrid||Lotus Exige S Coupe • Felino cB7 • BMW M6 • Mazda Furai • Marussia B2 • Mercedes-Benz SLS AMG GT Coupé Final Edition • Mercedes-Benz Silver Lightning • Hennessey Venom GT|\n||Falcon F7||Audi S4 • Mitsubishi Lancer Evolution X • Infiniti FX50 • Ferrari 612 Scaglietti • Ferrari 458 Italia • Arrinera Hussarya • McLaren 12C Spider • Savage Rivale GTR|\n|Lamborghini Aventador LP 750-4 SV\n||Lamborghini Aventador LP 750-4 SV||Lamborghini Urus • Lamborghini Miura • Lamborghini Gallardo LP 560-4 2013 • Lamborghini Estoque • Lamborghini Sesto Elemento • Lamborghini Asterion • Lamborghini Huracán • Lamborghini Egoista|\n||Sbarro Sparta||DS 3 Racing • Nissan Juke Nismo • Mercedes-Benz GLC Coupe • BMW M2 • Audi R8 LMS Ultra • Ferrari F50 • Savage Rivale Roadyacht GTS • Sbarro Alcador|\n|Chevrolet Corvette Grand Sport\n||Chevrolet Corvette Grand Sport||1967 Chevrolet Impala • Volkswagen Golf Design Vision GTI • Maserati MC12 • Chevrolet SS • Chevrolet Corvette C7 • Chevrolet Corvette C3 • Chevrolet 2016 Camaro SS • 9FF GT9 VMAX|\n|Porsche 918 Spyder with Weissach Package\n||Porsche 918 Spyder with Weissach Package||Scion FR-S • Porsche 959 • Audi RS 3 Sportback • Porsche 718 Boxster S • DS Survolt • Porsche Cayman GT4 • Dodge Viper SRT10 ACR-X • Porsche 911 GT3 RS|\n|Mercedes-Benz SLR McLaren 722 Edition\n||Mercedes-Benz SLR McLaren 722 Edition||Mini Cooper S Roadster • Alfa Romeo MiTo GTA • Chevrolet Camaro GS • Ford Focus RS • Maserati GranTurismo Sport • Ferrari 458 Italia • Cadillac CTS-V Coupe Race Car • Mercedes-Benz SL 65 AMG Black Series|\n||Yamaha FZ-10||Suzuki GSX-R750 • Kawasaki Z800 • KTM 1290 Super Duke R • Yamaha YZF-R6 • Ducati Monster 1200 • Ducati SuperSport S • BMW S 1000 RR • Suzuki Hayabusa|\n||Zenvo ST1||Geely GC9 • Donkervoort D8 GTO • Volkswagen Golf Design Vision GTI • Jaguar F-TYPE Project 7 • Ferrari F50 • 2010 Bentley Continental Supersports • Lamborghini Aventador LP 700-4 • Jaguar XJ220S|\n||Lightning LS-218||Suzuki GSX-R750 • Kawasaki Z800 • KTM 1290 Super Duke R • Yamaha YZF-R6 • Ducati Monster 1200 • Ducati SuperSport S • BMW S 1000 RR • Kawasaki Ninja H2R|\n|911||930 (SC) • 991.1 (GT3 RS) • 991.2 (Turbo S • Carrera S • GT3 RS • Carrera 4 GTS • Targa 4S • GT2 RS Clubsport)|\n|Boxster/Cayman||981 (Cayman GTS • Cayman GT4) • 718 (Boxster S • Cayman S • GT4 Clubsport)|\n|SUV/Saloon||Macan Turbo (95B) • Panamera Sport Turismo (971) • Taycan Turbo S (9J1)|\n|Supercar/hypercar||959 • Carrera GT • 918 Spyder (Standard/Weissach Package)|\n|Motorsport||911 GT1 Evolution|", "label": "Yes"}
+{"text": "We started as a small shop and a family with Dave and Margaret Nelson’s ownership which eventually went to their son Ken and his wife Cathy. Under their expert guidance Nelson’s became known for outstanding customer care and being one of the most trustworthy shops in Carroll County. As with life change is inevitable and Nelson’s Service Center was purchased by the Steinbach family which has deep roots in the Finksburg and Carroll County area, Ken and his wife Diane having graduated from South Carroll and Scott and his wife Alicia having graduated from Westminster. As a part of the purchase, Nelson’s joins the Auto Clinic of Maryland brand which is also proudly affiliated with Caton Auto Clinic in Catonsville, MD.\nThe Steinbach family has owned and operated Caton Auto Clinic in Catonsville, MD since 1975 and have grown it to be one of the largest shops in Maryland while still providing excellent, award winning, service as Caton Auto was awarded the Service Shop of the year by the WMDA and is consistently ranked nationally by the WMDA. We look forward to continuing the high level of service at Nelson’s.\nOur shop has plenty of room to work on your large and small vehicles while still having room for taking care of your snow blowers, tractors, golf carts, and other small engine needs. Our staff constantly trains to always be on top of their craft and ready to serve you! We can handle anything from an oil change to engine or transmission repair as no job is too large or small. We invite you to come in and see how we redefine your expectations of auto repair!", "label": "Yes"}
+{"text": "1992 Ford Ranger Firing Order – The first step in confirming your firing schedule is to remove around the control device cap. Now, place cylinder #1 in best old centre. Then, turn the generator by hand right up until air flow flows out from the #1 spark connect opening. Monitor your order the absorption valves are launched. You may follow the timing marks on the damper in order to get to get the engine at TDC if you own a Ho model. You can even check the firing series in the no-HO product by tugging off of the control device cover. 1992 Ford Ranger Firing Order.\nTo make sure that the firing series for the no-HO Ford pull off the device put and cover one particular tube in the great lifeless middle. Then, change the motor over to feel the tension escaping from Spark plug #1. To discover the precise place pay attention to the timing marks about the damper and after that transform the engine on manually. Pay attention to the get where the valves openings for intake.\n5.0L truck engines work comparable the engines of Full Size Cars, but they have a different firing sequence. They utilize the firing buy 1-5-4-2-3-7-8. The engines utilize curler cams in the early levels, however they secure the 30-two firing sequence. Tiny obstruct Fords come with just one firing get and bigger displacement designs have two firing orders.\nTo aid an Ford engine be more effective, ensure you utilize the proper firing series. The right firing order is vital since it may help to lessen engine vibrations. There are two versions of firing purchase that you can use for this motor which are HO and non-HO. For the most effective performance, utilize a low-HO 302-(1-5-4-2)-(1-5-4-2) firing get.\nThe no-HO variation of 390’s V8 engine was basically introduced through the Ford Engine Business in 1961 and provided because the foundation to the well known F-sequence engines. This generator is presently employed in Ford autos , and also other sorts of cars. A lot of racers also have this engine and pressing it for the 500plus hp collection. Has 401 hp and 427 pounds. torque, although this 4.6 engine has a low speed.\nThe firing series for that Ford 302 engine is equivalent to that of the Chevy or Mopar motors. However, how can you tell the difference between these two? To ensure your tube variety location, pull off the control device cover, then by hand convert your engine around. If air flow is flowing through your spark connect, then tube number one can be found next to the leading old heart (TDC).\nAn order where you fire the firing sequence of your own Ford 302 motor is determined by the style of the engine and also on the season of its production. As an example, the 1st 302 engines use a firing order of 1-8-7-3-3-2-5. The very first engines use the firing buy which was useful for the motors 280 and 260. Additionally, the firing pattern to flame the LH 302 engines is 1-3-7-2-6-5-4-8.\nThe firing purchase for that Ford 5.0L is very similar because the 289-302 except for a single differentiation. The 1980s designs was without curler cams, whereas the ones from 1989 ask them to. The HO 302-(1-5-4-2-6-3-7-8) firing buy was adopted on Fordtrucks and cars, and SUVs.\nIn relation to diesel motor the transaction of firing is different from gas motor. In order to function, both require spark plugs. Hence, the order where spark plugs fireplace from the Ford generator is crucial due to its performing. Once the diesel generator employs ignite plugs to start even so, gas engine demands kindle plugs for proper operations. An effective purchase of firing for that Ford motor is effective in reducing the vibrations in addition to motor sound.", "label": "Yes"}
+{"text": "You wouldn’t think that a golf cart would need insurance, but you’ll need some form of coverage if you plan on driving one on the roads of West Hartford, CT. The state’s General Assembly passed a law in 2009 allowing golf carts on local streets where the speed limit is 25 mph or lower. All you need is to be a licensed driver and have your golf cart protected with some form of insurance coverage.\nGolf carts and other low-speed vehicles (LSVs) have gained popularity in many communities and a few have even designed themselves around these vehicles. If you’ve already found recreational insurance coverage thanks to the experts at ALLConnecticut Insurance, you’re probably wondering if it can cover your golf cart.\nGolf Cart Coverage Options\nYou can cover your golf cart with an endorsement to your homeowner’s insurance policy, but it’s only valid as long as you’re riding on your own property. Once you hit the city streets, you’ll need coverage that’ll protect you in case anything happens on the road. Unfortunately, most auto insurance policies don’t cover golf carts or other recreational vehicles, for that matter.\nRecreational insurance can cover a wide variety of vehicles that normally wouldn’t be covered under your current auto or homeowner’s insurance policy, including ATVs, RV campers and yes, even your golf cart. By putting your golf cart under your recreational insurance policy, you’ll have the coverage needed to protect yourself and others in case the unexpected happens.\nSome insurance providers even offer standalone golf cart insurance policies. It’s worth exploring one of these policies if you haven’t yet opted for recreational insurance.\nIf you can’t wait to ride around West Hartford, CT, get the right coverage from ALLConnecticut Insurance first. Contact us for all of your insurance needs.", "label": "Yes"}
+{"text": "Another beef of mine with BMW is those darn RFT's. They can claim they have smoothed out the suspension all they want, but RFT's run like tanks to me.\nThe only one that truly benefits from RFT's is BMWNA. One less tire to supply, reduce mfg process, plain cost cutting while still charging you as if the vehicle had one.\nPeople say just change the tires no problem. Yes problem as the first time there is an issue BMW techs will all blame the tires you changed.\nIf they wont move with tires, they certainly won't do an MT tranny. Sorry guys.\n2013 S4 Loaded (and NO RFT's) Awesome is an understatement\n2008 MT X3\nRIP you were a faithful sidekick and will be missed.\n2007 AT X3 RIPOS\n2000 Jeep Cherokee\n1997 Twin Turbo RX-7\n1984 GTI Wolfsburg Edition Neuspeed and more", "label": "Yes"}
+{"text": "Building on an 80-year expertise in rear vision and on its business unit Safety Tech, dedicated to Advanced Driver Assistance Systems, Vision Systems has developed its newly R10 R46 approved camera monitoring system Smart-Vision. Designed by the Safety Tech division, Smart-Vision is an innovative and efficient solution for buses and coaches that replaces the rearview mirrors with high-definition cameras and interior displays, providing optimized visibility and enhanced ergonomics. The system operates night and day, in every weather and in any driving environment. Compared with standard rearview mirrors, the interior displays eliminate glare and the automatic adjustment of the screens’ brightness ensures excellent visibility in all lighting conditions.\n“Vision Systems is very proud to equip Irizar’s new generation bus with its solution; it is fully in line with our commitment to drive continuous innovation as a key to value-creating differentiation while responding to safety issues.” stated David Le Berre, Managing Director of Safety Tech, Vision Systems.\nThe Smart-Vision solution can comprise additional Advanced Driver Assistance Systems such as the Savety-Front solution, most particularly designed for urban vehicles to reduce the number of accidents in town, that detects road users in the frontal blind spots. Another driver assistance system developed by Safety Tech is the Savety-Mirror solution, that provides improved visibility, lane changing assistance, blind spot detection, high-speed and long-distance vehicle detection and monitoring of the vehicle’s surrounding.\nSmart-Vision does not only offer greater driving comfort and safety, but also allows a high return on investment, by significantly cutting fuel consumption thanks to improved aerodynamics, and by reducing insurance and maintenance costs, while maximizing the vehicle’s availability.\nHeadquartered near Lyon, France, with a production and sales unit in Florida, USA, and a trade office in Singapore and Dubai, Vision Systems is a tier-one system supplier in the aeronautic, land transport and marine industries, designing and producing bespoke solutions for specific market segments in complex environments.\nVision Systems’ land transport activity offers global solutions for coaches, buses, recreational vehicles, specific vehicles and trains: shading solutions, embedded entertainment systems, driver protection doors and Advanced Driver Assistance Systems. Vision Systems combines complementary skills in electronics, mechanics and composite to provide ever more innovative solutions for improved comfort, costs reduction and heightened safety.", "label": "Yes"}
+{"text": "With news of Land Rover halting production of the Defender 4×4, owners of the iconic vehicle are making the most with what they have. Overfinch, the original Land Rover enhancer, has created a limited-edition model to celebrate both the company’s 40th anniversary and the end of the line for the Defender model.\nThe “40th Anniversary” edition couples Overfinch’s signature bonnet with contrasting bodywork, including a front bumper with integrated LED lights, chequered plating, and rear quarter panels finished in black satin. Additional details include exterior door handles and fuel cap specially machined in aluminium with discreet Overfinch branding. Nods to the anniversary can be found inside, with a complete leather trim package and a bespoke 40th anniversary crest stitched into the front headrest.\nProduced in five editions, the asking price for an Overfinch “40th Anniversary” Defender is approximately $100,912 USD. Visit the model page for more information.", "label": "Yes"}
+{"text": "U.S. 1 Reopens After Tanker Truck Flips\nPosted May 26, 2006 10:42 a.m. EDT\nCARY, N.C. — Traffic was snarled on U.S. 1 for much of Friday afternoon after a grease tanker truck flipped, blocking several lanes near Highway 64.\nU.S. 1 At Beltline\nThe wreck happened around noon Friday. A tanker truck driver headed northbound said a van coming from the Tryon Road ramp merged right in front of him.\n\"I had to swerve to miss him,\" said truck driver Ricky Barbee. \"There was another car beside me and I just went over.\"\nBarbee said he hit the concrete barrier and landed on the southbound side.\n\"You could feel it going over,\" he said. \"It hit the concrete barriers and flipped on its side.\"\nBarbee wasn't hurt, but the mess it created took hours to clean up. The truck initially blocked all lanes of U.S. 1 near Highway 64. However, crews were able to open one lane of northbound U.S. 1 and one lane of southbound U.S. 1.\nThe road was reopened at 3:40 p.m., but delays were expected throughout the evening because so many vehicles were backed up on the road.\nThe tanker truck was carrying grease from restaurants and no hazardous materials leaked from the vehicle.", "label": "Yes"}
+{"text": "China’s BYD Co Ltd will set up a new electric vehicle (EV) factory in Mexico, Nikkei reported on Wednesday, citing the company’s Mexico head, as the EV maker aims to establish an export hub to the United States.\nBYD, known for its cheaper models and a more varied lineup, recently overtook its biggest rival Tesla Inc to become the world’s top EV maker in terms of sales.\nAccording to the Nikkei report, BYD has launched a feasibility study for the Mexican plant and is currently negotiating with officials over terms, including the factory’s location.\nWhile BYD has its sales concentrated in China, it also aims to expand globally and is building new plants overseas in addition to expanding Chinese exports.\nMexico’s massive automaking sector, populated by many of the industry’s top global players, is tightly integrated with the U.S. industry.\n“Overseas production is indispensable for an international brand,” BYD Mexico country manager Zhou Zou told Nikkei.\nThe carmaker’s Mexico office declined to comment.\nMajor U.S. automakers have warned that Chinese cars could spell doom for their own prospects, among them Elon Musk’s Tesla.\nLast month, Tesla’s chief executive predicted that Chinese automakers will “demolish” global rivals without trade barriers.\nMusk’s view is echoed by a leading advocacy group.\n“The introduction of cheap Chinese autos – which are so inexpensive because they are backed with the power and funding of the Chinese government – to the American market could end up being an extinction-level event for the U.S. auto sector,” according to a forthcoming report by the group Alliance for American Manufacturing.\nIn Latin America, BYD plans to spend 3 billion reais ($620 million) on a new industrial complex in northeastern Brazil.\nThe three plant complex will be built in northeastern Bahia state, on land formerly occupied by a Ford plant that closed in 2021.", "label": "Yes"}
+{"text": "Published: May 2022\nAccording to data from heycar, electric car sales increased by 186% in 2020, and, as of April 2022, there are approximately 400,000 electric cars (EVs) on the road in the UK, plus more than 750,000 plug-in hybrids (PHEVs).\nWe’ve all known for a while now that hybrid and electric cars are the future, but it’s starting to feel real now. Since the start of the year, we’ve had multiple conversations with clients about how they’re adapting, investing in, and positioning themselves ready for all things EV.\nMost of these conversations have been about two key areas of the business: Sales and Aftersales. Firstly, how do we inform prospective and existing clients about electric vehicle features, specs, offers, etc? Secondly, how does an EV service plan look and what is best practice?\nOne third, and crucial, business area to consider is Marketing: how the new customer journey looks, how eCRM and social media can increase sales and how Dealers can improve customer retention for EVs – just as they have done historically for ICE vehicles.\nEducate & Inform\nWe know that consumers are spending more time researching vehicles online than ever before and are more likely to only visit the dealership in person when they’re ready to commit to a purchase.\nIn fact, our research shows that since the pandemic, the time from enquiry to sale has decreased from 16 days to just six.\nDealers should be focusing on educating their prospective customers and making it as easy as possible to find all the information they’re looking for – especially if this is their first electric car.\nEmail and Social Media campaigns are a fantastic way to spread the word and position yourself as the fountain of all EV knowledge, whilst driving trackable traffic to your website.\nWhat Does An EV Service Look Like?\nAs consumers move away from ‘traditional’ services, who is responsible for educating consumers on the areas of the EV that will need annual checks and maintenance? MOTs after three years will still be a requirement but don’t forget everything else like filters, brake fluid and, crucially, battery health.\nOne Size Doesn’t Fit All\n… not that it ever did.\nWorkshop bookings will soon have more hybrid and electric vehicles than ever, which means your Service customer touchpoints will need to change. We’ve always supported clients with their Service or MOT reminder Emails and SMSs and will continue to do so – it’s time for Dealers to segment their data even further based on engine types.\nAutomated messages will be your friend now that we’re approaching a new EV aftersales customer journey, as timing will be everything. EV customers will quickly become unengaged if they receive communications at the wrong time for their vehicle, and these comms must include EV appropriate creative and terminology.\nDealerships As EV Destinations\nThe more mainstream EV vehicles become, the more Dealers will need to adapt their online and offline activity.\nWebsites should be an online destination with Accessory Stores for Parts and Merchandise. Don’t lose sales to those better equipped for eCommerce; get something going yourself. Dealers can utilise Amazon, eBay, and Shopify – for example. This will open more opportunities for promo marketing and, therefore, reasons to contact customers in between purchases and services. Whether that’s email campaigns or social media and other online ads we can help.\nThen there are the offline destinations – we will start to see physical locations with less footfall as more of the customer journey takes place online and vehicles require less frequent servicing. Dealers should make their charging points accessible to existing and non-customers. By having a welcoming space for coffee and free WIFI, businesses will be able to develop better customer relationships and therefore improve and support retention.\nIt may sound like we have more questions than answers at this point, but we’re actively engaging with dealerships across the country to understand what’s on the horizon for EVs and where we can support with automotive digital marketing solutions.\nContact Us today for more information and marketing support.", "label": "Yes"}
+{"text": "Remember the Chevrolet Aveo? The compact hatchback from Chevrolet famous for being so boring, bland, and just plain terrible. Clearly Chevrolet knew this and decided to change the name to Sonic for their next generation model. “The Sonic represents a new beginning for Chevrolet in the small car segment and so we felt it was time to give it a new name,”,“The new car is roomy, stylish and fun to drive, and Sonic is a youthful, energetic name that helps convey what this vehicle is about.” these are the words coming from Chris Perry who is the vice president of Chevrolet U.S. Marketing. Well no one have driven it before so we can’t prove him wrong yet but I hope this new Aveo, uhh sorry, Sonic will be much better than the previous generation. The car will only be called Sonic in the US, Canada, and Mexico but still Aveo elsewhere. But what do you think? Do you think Chevrolet really find the word Sonic energetic because of the word supersonic? But based on the first picture of the Sonic in BLUE, I really believe that Chevy got the name because of this Sonic.", "label": "Yes"}
+{"text": "mycotopian mycotopian is offline\n- Total Messages: 2\n- Most Recent Message: 07-31-2019 06:33 AM\n- Visitor Messages for mycotopian\n- Last Activity: 01-03-2018 01:47 PM\n- Join Date: 03-23-2011\n- Referrals: 0\nShowing Friends 1 to 1 of 1\n|01:36 PM - mycotopian quoted Charlie98 in post New custom Monster seat\nI haven't spent more than 2 ho...\n|11:08 AM - mycotopian quoted hyperspd7 in post New custom Monster seat\nThat seat looks great! What wa...\n|03:24 PM - mycotopian quoted VonBrandwolf in post 1200 R Foot pegs.\nPerfect opportunity for a new muf...\n|10:01 PM - mycotopian quoted UNC Monster in post Show me your tailbags...\nKriega US-30 Drypack. http:/...\n|10:00 PM - mycotopian quoted Brianq103 in post Any suggestions for a tail bag that can fit a full face helmet?\nI'm using a Givi case. Quick d...", "label": "Yes"}
+{"text": "Automatic Emergency Braking with Pedestrian Detection works automatically at speeds between 5 and 140km/h. For speeds between 5 and 30km/h a 0.9g deceleration is applied to reduce the impact speed of the collision. For speeds of 30 to 140km/h the system reduces the speed by up to 50km/h. To reduce speed by over 50km/h the driver needs to provide additional braking. The operational speed range depends on the type of obstacle detected:\nNot only was the body a bit bigger, but the Kadett B also had a slightly enlarged 1100 cc engine. This was externally a very compact motor indeed, and looked rather lost in the Kadett’s Kavernous engine bay. Power output increased correspondingly; there were 45 and 55 DIN hp (high compression) versions for Europe; the weaker on was sent stateside with a 54 (gross) hp rating.\nPower will come exclusively from a three-cylinder 1.0-liter naturally aspirated gasoline engine developing 75 HP (55 kW) delivered to the front wheels through a five-speed manual gearbox. Opel and Vauxhall say the chassis has been tweaked to provide \"exceptional safety and comfort\" and both cars come with traction control, hill start assist and electronic stability control.\nWe reviews the 2019 Ford Fiesta where consumers can find detailed information on specs, fuel economy, transmission and safety. We reviews the 2019 Ford Fiesta Photo where consumers can find detailed information on specs, fuel economy, transmission and safety. Inside, the 2019 Ford Fiesta is similarly cluttered. Its dashboard is upright and puts climate and audio controls at the top of […]\nOn August 26, 1945, the State Defense Committee published Order № 9905, which prescribed the start of production of the 4-door Kadett on the Moscow small car plant \"without any changes to the design\". But implementation of the plan was far from smooth. The Rüsselsheim plant had been deeply involved in the Nazi war effort, producing aircraft engines for the Luftwaffe, and consequently has been heavily damaged by the Allied air raids. Very little was left to be salvaged – mostly incoherent drawings and plans, with several stamping dies for the 2-door version of the Kadett to add.\nA convertible version was also available, for the first time in 1987, built by Bertone of Torino/Italy, bringing it to line with competitors, such as the Ford Escort and Volkswagen Golf. For the 1988 model, capacities were raised from 1.3 to 1.4 litres. In the fall of 1986 a new 1,998 cc engine replaced the 1.8 hitherto used on the GSi and Vauxhall Astra GTE in many markets, although the 1.8 continued to be sold in some places. In 1988, a 16-valve twin-cam version was developed for a high-performance GSi/GTE model, yielding 156 PS (115 kW) in non-catalyzed form, six less horsepower with a catalytic converter fitted. While criticized for a lack of refinement, the GSi 16V was also lauded as the most powerful car available in its class at the time. Aside from the \"16V\" badging, it could be told from an eight-valve GSi by its twin rectangular exhaust pipes.\nThe transfer gearbox in the AWD models — the same as used in the Vauxhall Cavalier AWD—was somewhat on the flimsy side, liable to suffer damage from conditions such as minor differences in tyre wear or tyre pressure between front and rear axles. Since front and rear tyres would naturally wear at different rates in normal driving, it was necessary to swap front with rear tyres every 15,000 miles (24,000 km).\nAt the first round of the season held at the former Grand Prix track of Zolder in Belgium, Opel Team Joest’s misfortunes continued. Manuel Reuter retired in the early stages, with both John Winter (16th) and Keke Rosberg finishing a lap down on winner Alessandro Nannini (ITA) in the Alfa. Race 2 was more positive however, with only John Winter dropping early on. Reuter lead the Opel charge in 7th, with Rosberg in 10th.\nDespite its age, the Opel/Vauxhall Corsa was ranked #10 in Europe's best-selling cars top last year. An all-new model is right around the corner and it should help the supermini put up a good fight against other subcompact hatchbacks like the next-gen Renault Clio and Peugeot 208. Today, Opel is releasing some technical details about its revamped five-door-only city car, emphasizing on the diet it’ll be going through for its sixth iteration.\nA rare \"Sport\" model was produced in 1985 to homologate for the sub 1,300 cc class of Group A for the British Rally Championship. These sport models were white and came with unique vinyl decals, a 13SB engine with twin Weber 40 DCOE carburettors, an optional bespoke camshaft, a replacement rear silencer, and few luxuries. This gave 93 hp and a top speed of 112 mph (180 km/h) with a 0–60 mph time of 8.9 seconds. These are by far the rarest models (500 produced) and thus acquire a high market price if one does become available.\nSRi models get sport style seats and distinctive 16in alloy wheels, while those opting for the SRi VX-Line models get 17in alloys, sports suspension and an aggressive bodykit thrown into the package. The special edition models consists of the Limited, Red and Black Edition Corsas. Limited Edition models get Vauxhall's OnStar concierge and emergency portal, sports seats, air conditioning, chrome exhaust, sports suspension, 17in alloy wheels and front foglights included in the package, while the Red and Black Edition gets a red or black paint job, 17in diamond-cut alloy wheels and are the only Corsas fitted with the 148bhp turbocharged 1.4-litre petrol engine.\nThe new Kadett follaed the innovative Opel Olympia in adoptin a chassis-less monocoque construction, suggestin that lik the Vauxhall 10 introduced in 1937 bi Opel's Inglis sister-company, the Opel Kadett wis designed for hie volume law cost production. Competitive pricin led tae commercial success, an Kadetts continued tae be produced durin the early months o the war: bi the time production wis interruptit in 1940 follaein intensification o hostilities, 107,608 o thir Opel Kadetts haed come aff the assembly line at Opel's Rüsselsheim plant, which haed been the first major caur plant in Germany tae apply the assembly-line production techniques pioneered bi Henry Ford.\nSÆLGES MED 12 MDR GARANTI OG FEJLFRI BRUGTBILSATTEST! Se Mere På Www.100Autotjek.Dk, Airc., Fjernb. C.Lås, Fartpilot, Kørecomputer, Infocenter, Sædevarme, Højdejust. Forsæde, El-Ruder, Automatisk Start/Stop, Cd/Radio, Håndfrit Til Mobil, Multifunktionsrat, Varme I Rat, Cityservo, Bagagerumsdækken, Kopholder, Læderrat, 6 Airbags, Abs, Esp, Hvide Blink, Indfarvede Kofangere, Ikke Ryger, Attraktiv Finansiering Tilbydes Også Uden Udbetaling, Se Flere Gode Tilbud På Www.Ramsdalbiler.Dk, Ring For Besigtigelse På Tlf 30113762\n¹Opțional. Funcționează automat între 5 km/h și 85 km/h. Între 5 și 30 km/h, decelerarea pentru reducerea vitezei de impact este de 0,9 g. Într 30 și 85 km/h, sistemul reduce viteza cu maxim 22 km/h. După acest prag, șoferul trebuie să frâneze singur pentru a reduce și mai mult viteza. Gama de viteze de funcționare a AEBPD depinde de obstacolul detectat (mobil: între 5 și 85 km/h; fix: între 5 și 80 km/h; pietoni: între 5 și 60 km/h). Sistemele Opel de asistență pentru șofer au rolul de a asista șoferul în cadrul limitărilor imanente ale sistemului. Șoferul rămâne responsabil pentru sarcinile conducerii. Se preconizează că va fi disponibil din toamna anului 2017.", "label": "Yes"}
+{"text": "Drivers defect report books\n7. (1) The report completed when the daily inspection is completed must include the following: 1. The licence plate number and plate jurisdiction of the vehicle. Ebuyer - Cheap Computers. Chartwell Vehicle Defect Report Book Product Discussion. Our comments box is a great way for you to view other people's … FMCSA rescinds the requirement that commercial motor vehicle (CMV) drivers operating in interstate commerce,. Driver-Vehicle Inspection Report (DVIR).\nPRO-DEFECT An excellent training tool for new and existing drivers, the only methodical 3 in 1 driver check, defect report and defect rectification book available on. Browse our extensive range of vehicle defect forms, defect report books and other daily walk-around check systems to keep you safe and compliant!\nDrivers defect report books\nSmartCheck provides paperless defect management. Drivers complete their walkaround checks and. when I get the defect report,. per month for defect books,. School Bus Driver's Daily Vehicle Inspection Report (DDVIR) Date of Inspection: Odometer End: Bus #: NO DEFECTS -- I have detected no defect, or deficiency in … School Bus Driver's Daily Vehicle Inspection Report (DDVIR) Date of Inspection: Odometer End: Bus #: NO DEFECTS -- I have detected no defect, or deficiency in … Trailer Check & Defect Report Books Pad Duplicate 50 pages. TR50. 50 numbered pages. Duplicate For Drivers reporting of Daily Defects for Trailers Welcome to Driver Log Books. Driverlogbooks.com answers the needs of truckers, drivers, trucking companies and fleet operators. It is our goal to help by providing.\nReference Books & Newsletters. CDL drivers who are licensed to operate commercial. How long must a motor carrier retain a Driver Vehicle Inspection Report. Driver’s daily logs books and vehicle inspection reports are necessities for drivers. Whether you prefer carbonless or carbon forms, a detailed Driver’s Vehicle. More than simply having drivers fill out and sign each report,. submission-of-no-defect-driver-inspection. 4 “Driver Vehicle Inspection Reporting for. Aug 05, 2013 · Daily Defects is an app for all UK truck, coach, lorry, HGV or other heavy vehicle drivers to assist in keeping a record of your daily vehicle inspection. Created Date: Tuesday, May 16, 20005:31:36 PM\nCreated Date: Tuesday, May 16, 20005:31:36 PM A Trucking Company Resources - From log books to driver vehicle inspection report to training and compliance guidelines Bus/Coach Driver's Daily Vehicle Inspection Report (DDVIR) Date of Inspection: Odometer End: Bus/Coach #: NO DEFECTS -- I have detected no defect, or … Find great deals on eBay for Drivers Defect Book in Commercial Vehicle Parts. Shop with confidence.\nFor drivers reporting of daily defects: 50 numbered duplicate pages. Nil Defect Reporting System: LGV. This report pad is the handy size approximately 5″ square. TachPro supply vehicle compliance products to the transport industry, including defect report and vehicle defect forms, breathalyser kits and more. FMCSA proposes to rescind the requirement that commercial motor vehicle (CMV) drivers operating in interstate commerce, except drivers of passenger-carrying …", "label": "Yes"}
+{"text": "Only one Jeep and Chrysler dealer serving Boston, MA offers two great lines of vehicles at the best price in town, expert service and a friendly, professional staff under one roof, and that's Quirk Chrysler Jeep. When you shop at our Jeep dealership serving Boston MA\n, you'll find one of the widest selections of new Jeep, new Chrysler, used Jeep and used Chryslers in MA.\nOur inventory includes hundreds of new and used Jeep and Chrysler models\n, so you can count on finding the exact vehicle you want, right down to the trim and features, at our Boston Jeep dealer. Tame Massachusetts winter roads or explore the trails of New England in a Jeep Grand Cherokee, Compass, Cherokee, Patriot or Wrangler or Wrangler Unlimited. Discover the luxury of a Chrysler 200 or 300, or get behind the wheel of the Chrysler Town & Country, one of America's favorite family vans, all at Quirk Chrysler Jeep.\nThe #1 Jeep And Chrysler Dealership Serving Boston, MA is in Braintree!\nOur Chrysler dealer serving Boston MA\ngoes the extra distance to make sure that every customer gets the most value for their money, and we will always be here to answer your questions and provide expert maintenance for your new Chrysler or Jeep. Visit our Boston Jeep dealer today to see the many ways that Quirk works to save you money!\nWe make finding the right vehicle easy at our Braintree, Massachusetts Jeep dealer, with a convenient location minutes away from I-93 at 280 Quincy Avenue. Our Chrysler and Jeep sales department is open seven days a week, and our Chrysler and Jeep service\ndepartment is open every Monday through Saturday.\nCopyright Quirk Auto Dealerships 2014, Quirk Chrysler Jeep near Boston MA", "label": "Yes"}
+{"text": "Lancer Service Auto Care was established in 1977 and has been providing the Twin Cities and the surrounding area with quality automotive repairs ever since. This shop features a team of very experienced, highly trained, and ASE Certified technicians who are equipped with the tools and dealer level diagnostic equipment necessary to perform a wide range of repairs. These repairs can range from minor and major mechanical repairs, to tires and wheel alignment, to check engine light and computer diagnosis and repairs, as well as your scheduled maintenance needs. Work performed by this RepairPal Certified shop is backed by a 24-month / 24,000-mile warranty for your peace of mind. Our survey of their recent customers revealed a group who enthusiastically describe the team here as: “helpful”, “professional”, “honest”, “friendly”, and “excellent”. Local shuttle service, rental & loaner cars, early bird drop off, and a waiting area with wireless Internet are available for your convenience.\nLancer Service Auto Care\nSaint Paul, MN 55101 USA\nAuto Repair Experience\n- Carl Thomas, Owner\n- Established 1977\n- 5 Auto Repair Mechanics on Staff\n- 5 ASE Certified Auto Technicians\n- 110 Years of Car Repair Experience\n- Check Engine Light\n- Oil Change & Lube\n- Scheduled Maintenance\n- Service & Repair\n- Timing Belts\n- Early Bird Dropoff\n- Loaner Car\n- Rental Car\n- Service Guarantee\n- Wireless Internet\nMakes We Serve\nExcellent service, expert knowledge of all makes/models, very detailed, on time, honest!!\nI had a fantastic experience with you guys. You really helped me in a pinch, and I feel like you treated me with respect, which doesn't always happen as a young woman when seeking auto care.\nGood Honest service.\nI feel confident that I am being treated honestly and fairly.\nFriendly, professional, quality work.\nConsistently high levels of customer service and reliable car care.\nThey care about their customers and actually want to help them. They also do excellent work.\nFriendly, great service.\nThis kind of service is hard to find today. When you recommend Lancers you are doing them a \"real\" favor. I send my entire family there. (adult children & their families.)\nGreat, honest, and friendly service and even better people.\nAlways helpful and quick.\nFair prices, nice service, good location.\nReliable, trustworthy, you get what you pay for. Quality repairs.\nVery good customer service.\nVery helpful and honest staff providing Excellent service at an affordable price.\nThese guys aren't cheap but you can count on things being done right the first time.\nThey do great work, clearly communicate what needs to be done and the cost. They keep me up to date on preventive maintenance and keep records of maintenance history and things to keep an eye on.\nConvenient location. Straight forward service and explanations.\nGood service, fast turnaround time, convenient location.\nGreat customer service and thorough explanation of car needs.\nThorough work, and very responsive follow through and advise from Carl and the other advisers.\nThey were very helpful, delivered service on time, and expressed genuine care for my needs.\nGreat service, good transparency and communication. Good value compared to dealer.\nWe LOVE bringing our vehicles to Lancer - they are very proactive about the care of our vehicles and we really respect that!\nThey are always swift and thorough.\nThey did just was needed and quickly, highly recommended.\nI am able to get in a timely fashion, they thoroughly explain issues, and get it completed timely. They are trustworthy.\nFriendly staff, excellent service, no b.s.\nLancer has always advised me of work that needs to be done or should be done and left it to me to decide if I wanted the work done. They are courteous and knowledgeable. They review the work they have done and point out those things which they need to watch. I feel very comfortable with and trust their advice.\nLancer staff are professional, competent, friendly. They show they want to have long-term relationships with their customers by identifying things to monitor for the future rather than trying to sell service that doesn't need to be done right away.\nI have had a couple of problems but they were professional about it.\nThey have excellent recommendations for me and my cost of repair was low and accurate.\nExcellent, honest, informative and timely service.\nYou get the job done right, on time, and for the price quoted.\nService is always excellent.\nThey have done excellent work each time my car has been serviced there. They make sure you understand whats being suggested to repair on the car and the reason they are making the recommendation.\nThey have always been responsive, on time, and treated me well.\nExcellent Professional Service.\nGood, honest service.\nGreat customer service!\nI've been a customer there for several years and have always received good service.\nI have taken my vehicles to Lancer for years and have found them to be honest, nice and easy to work with. I like that they schedule a day for the necessary service and have the car done at the end of they day for the price they quoted.\nI trust Lancer, I would have rated higher but their hours and location are not always convenient\nI had a great experience, they have a great staff, and they did a great job.\n- High quality repair\n- Guaranteed fair prices\n- Real, verified reviews\n- Current expert training\n- Warranty on repairs\n- Great customer service", "label": "Yes"}
+{"text": "With its magnetic, well outfitted appearance, this 1993 Jeep Wrangler YJ is like a ray of sunshine for off road enthusiasts - albeit a very rugged, powerful ray of sunshine. It's built for action and features upgraded power under its hood to handle anything that might stand in its way. It will also pull into its next lucky owner's garage with a clean Autocheck report on board to attest to the fact that it's been kept clear of any collisions of note.\nThis YJ will attract your attention while it's still at a distance and, as you draw closer, you'd rightfully expect to see some scuffs or other badges of honor commemorating its off road pursuits, but you really won't find many. The straight looking exterior backs up the AutoCheck report's findings - the body panels continue to line up well with each other and everything sits nice and flush. An array of added components leaves no doubt that the intent here was to equip this Jeep for serious action off the asphalt - the heavy duty bumper carries a pair of fog lights to team with another pair mounted on the sides of the windshield and a Warn winch sits in front of the front grille, ready to lend a hand to extricate you - or other motorists - from unyielding terrain. The padded rollbar in back adds a nice finishing touch while minimizing wear on the included vinyl soft top when it's in place for protection.\nThe interior has seen some substantial refurbishment, so it's well positioned to provide plenty of future miles of enjoyment. A pair of Bestop bucket seats and a matching center console have been added and they sit over an expanse of fresh black carpeting. One of the decided advantages the Wrangler has over its early predecessors is its ability to accommodate hard shell doors. They're on hand here and are easily installed to provide for a more sheltered driving experience and they even sport interior panels that look in very solid condition. The dash area sports a very fresh look, with an uncracked dash running the width of the cabin and an assortment of clear, functional gauges in the instrument cluster. A Pioneer AM/FM/CD player with an auxiliary port and Bluetooth connectivity sits just below, so you'll have no shortage of audio options. The two-seater configuration on this '93 yields some welcome storage space in back that's easily accessed via the swing out liftgate.\nWhereas powerplant options maxed out with a capable inline 6 cylinder the year this '93 debuted, a performance built 350 cubic inch V8 now holds court in the engine compartment and it's been well-equipped to maximize its obstacle surmounting capabilities as it teams with a TH350 3-speed automatic transmission. A 4-barrel Holley carb and medium high-rise intake sit just below a sharp looking Edelbrock air cleaner to up output even further and, with a pair of Hedman headers leading out to Thrush mufflers, when you rev things up, you'll get a great, no holds barred exhaust note to announce your presence. Featured power steering and power brakes with discs in front provide easy navigation and stopping. Should the call to leave the asphalt beckon, the 4-wheel drive is easily accessed and in good working order to bring power to its 15\" Mickey Thompson wheels outfitted with Maxxis Mudzilla tires that show just the aggressive tread you'd want for a ride like this one.\nJeeps tend to get snatched up quickly here and when they're as well outfitted and powerful as this 1993 Jeep Wrangler YJ, the demand is that much stronger. Call today!", "label": "Yes"}
+{"text": "Common Issues to Avoid When Having Your Car Transported\nShipping cars to a particular destination can save hundreds, if not thousands of dollars on unforeseen expenses, whether it be something as plain as the gas itself or potential damages and maintenance is irrelevant. However, shipping your car for the first time, or better said, even the first couple of times in some instances, can be highly frustrating.\nToday we’ll talk about avoiding common mistakes when preparing your car for shipping so that you can save yourself stress and money simultaneously, so without any further ado, let’s dive straight into it.\nNot having the necessary paperwork\nMost paperwork revolves around your personal information and the information about your car. Essentially, you’ll need a printed driving license or your passport, a printed e-mail confirmation of the booking order, the insurance certificate, your car’s registration papers, and proof of car ownership.\nEach company handles its business differently, so your contract may be annulled immediately if you fail to provide the corresponding documents. You may be given some extra time to provide them (with extra charges, though), or the driver may go with the documents you have on yourself.\nThe most dangerous of the three scenarios is the third one; ‘shady’ companies, or somewhat shady employees who would try to reassure you that you don’t ‘need’ all those documents are typically the people who would try to scam you.\nThe only reason such extensive paperwork is needed for car shipments is that vehicles are expensive items. Without personal ID, the driver won’t be able to verify that they’ve taken the car over from you personally; without vehicle ID, no one can verify that a particular vehicle was transported.\nLitigation usually favors the side with more proof in their bag, so collect the necessary and relevant paperwork in time.\nNot having a clue about the Bill of Lading\nOne of the most critical documents in the entire shipping procedure is the Bill of Lading. In more concrete terms, this bill is a legal document issued by the carrier to the shipper, which details the quantity, the destination, and the type of transported goods.\nAlthough the companies handling the shipment will fill out most of the blank fields, you’ll need to put more than just your signature there. Aside from personal information, you’ll also need to provide detailed information about your car. In practice, most consigners write their car’s type, weight, and value, although additional information may be asked of you in some instances.\nOne of the main reasons you should do your best to know as much as you can about this bill is because this document will be all you’ll need should you ever find yourself in a lawsuit against the shipping company. In simpler terms, the more accurate information you provide, the better your odds of winning the litigation.\nShipping a dirty car\nFirst, your car should be as clean as possible so that the shipping inspector can better perceive any potential (existing) damages. After making sure that the paperwork is checked, one of the first steps of the process is inspecting your vehicle for damages, and dirt can hide scratches and deeper dents.\nFor instance, a dirty car in pristine physical condition can get damaged on the way; the inspecting agents typically don’t scrape the dirt to search for damages, so you can almost count on the potential damages not being filed in the papers upon arrival.\nIn that regard, by cleaning your car thoroughly, you encourage the inspecting personnel to make a more thorough search, which almost guarantees that potential damages will be present in the paperwork, allowing you to receive money based on your contract.\nGetting extra insurance for car shipping\nIt’s natural to feel uneasy about leaving your car in the hands of strangers for days or weeks, especially knowing that your car will be loaded onto a transport truck alongside several others.\nWe’ve all seen movies where vehicles in action scenes would pop off trailers for no apparent reason, so out of fear that their car would be damaged, many people get additional insurance deals to try to counteract this.\nThe fact is that you do not need to have any insurance whatsoever for shipping your car. According to the US Department of Transportation, transport companies are legally obliged to carry insurance liability.\nIt is important to have car insurance for several other reasons. You’ll need to drive your car to the pick-up location and then from the drop-off location to wherever you wish. Shipping insurance covers your vehicle while being transported exclusively; it ends when the transporter hands you the keys.\nIn that light, people frequently shipping cars may want to consider a company that offers approachable quotes and dependable services. If you still don’t have an insurance contract, you could use 4AutoInsurance services to compare quotes from various companies for free.\nLeaving items in your car\nEven if you have auto insurance, you should know that it only covers your vehicle as a singular object; whichever items you’ve left inside the vehicle are not in any way covered by the policy unless a particular clause was added.\nGiven that most insurance contracts are ‘by approach’ type (fixed terms and conditions), it’s remarkably rare in practice to see a contract that would cover in-vehicle items in shipping situations.\nPay extra attention when inspecting your vehicle’s interior before handing it over to the shipping driver, as physical damages are usually rarer than damages caused by fire or water.\nFor instance, if you’ve left a wallet on the seat and your window was left slightly open, a day of heavy rain would ruin not just the seat but the contents of your wallet (and the wallet itself).\nWe hope that this guide was helpful to you and that you have learned something new today on the common mistakes you need to watch out for when preparing your car for shipping. Make sure you are staying safe in these times we are all going through, and have a good one, guys!", "label": "Yes"}
+{"text": "Terry Childers Motors in La Grange, Missouri\n|Terry Childers Motors\n702 W Wyaconda St\nLa Grange, MO, 63448\n(573) 655-4150 - Phone\n(573) 655-4150 - Fax\nThe vehicle makes and models sold by Terry Childers Motors and their price quote ranges may vary. New\nand used cars sold at this Terry Childers Motors dealership may be manufactured by one or more of the following car companies: Acura, Audi, BMW,\nBuick, Cadillac, Chevrolet, Chrysler, Dodge, Fiat, Ford, General Motors, GMC, Honda, Hyundai, Infiniti, Jaguar,\nJeep, Kia, Land Rover, Lexus, Maserati, Mazda, Mercedes-Benz, Mitsubishi, Nissan, Porsche, Ram, Saab, Subaru,\nSuzuki, Tesla, Toyota, Volkswagen, or Volvo. Some automobile dealerships offer additional services such as\non-site repair shops, roadside assistance, car insurance, and financing options.\nTerry Childers Motors hours of operation may also change. For more details, reach this La Grange Car\nDealership Terry Childers Motors directly at the address or phone number mentioned. There are 3 other\ndealers, brokers, car lots, or showrooms within the vicinity of La Grange.\nAll brand names used on this website other than Car-Inc.com, are used without any claim to the trademark, copyright, special relationship and/or other rights of the owners of such names.", "label": "Yes"}
+{"text": "Amidst the pool of the car manufacturers in the world, one company which has made its name shine clear out of the league is Czech's automobile company Skoda Auto. The company is now known to produce some of the best cars in the world under sedan, hatchback, luxury and racing models. The Skoda car models are known as the fun driving vehicles which one can drive with a cool head and get the race element as well, if challenged. The famous car models from the Skoda which have made the big name are Yeti, Octavia, Fabia, Superb, Rapid and Mission.\nNow, the very first reason which has made the world a fan of Skoda car models is the fun while driving. The engines in the mid-sized sedan cars are not only powerful, but efficient also to give the driver feeling that they actually are driving a car tailor-made for you. Also, the features provided in the car models are none less than any of the top model luxury cars like Audi or BMW under a given price range. The Skoda cars are very spacious with classy control panels and interiors too. Now what else you would be needing in the average priced car?\nIf I talk about the race element, the Skoda car models have speed in their genes, that no other car can take them lightly while racing. It has appeared on many world level rallies as well, which has empowered the position of the Skoda and Czech technology on a global scale.", "label": "Yes"}
+{"text": "02-F150-4.2L-102k. Truck was rolling down the road at approx. 35 to 40 mph. A speed bump/table appeared out of nowhere and was hit before beeing seen. Immediately since this event, the truck pulls to the left while applying the brakes. It pulls very hard and is fine while rolling down the road. Is there some damaged steering component or did one of the calipers go out from the jolt?\nUsually this would be a sticking brake caliper, but since the problem occurred right after slamming into a speed bump, it’s possible something got bent. I’d put it up on a lift and check everything over, including the alignment.\nIf it is a caliper, would it be the right caliper not fuctioning properly since the left one is grabbing and causing it to pull to the left?\nYep, I’d jack up the RF wheel and spin it by hand while someone steps on the brake. If it appears to be working even somewhat, then repeat on other side to compare. Inspect for damaged lines/hoses.\nYou could also have damaged a wheel bearing, a ball joint, a tie rod end, and any number of other articulating parts that if they fail will cause a wheel to fall off or fold in, resulting in a serious crash. I urge you to not drive this vehicle until you have the cause diagnosed. Yuou could cause a wreck and serious injury to innocent people…not to mention turning a $400 problem into a $9,000 problem.", "label": "Yes"}
+{"text": "Austin Healey 3000 MKII BT7 Tri-Carb\n- Condition: Used\n- Make: Austin Healey\n- Model: 3000\n- Type: 4 seater roadster\n- Trim: Tri-Carb\n- Year: 1962\n- Mileage: 47600\n- VIN: 16515\n- Color: Guards Red over Old English White\n- Engine size: 3.0-liter inline-six\n- Number of cylinders: 29K INLINE 6\n- Fuel: Gasoline\n- Transmission: 4 Speed with Overdrive\n- Drive type: REAR\n- Interior color: Light Khaki\n- Drive side: Left-hand drive\n- Vehicle Title: Clean Want to buy? Contact seller!\n1962 Austin Healey 3000 Tri-CarbSeller's Description:\nThis 1962 Austin-Healey 3000 is a four-seat roadster which was acquired 38 years ago, and was given a body-off restorationin 1999 and finished in 2000. Frank Wicker's Shop in Kendallville, Indiana did body only. Frank is well known in the Healey world for outstanding Healey Restoration. Power comes from a 3.0-liter inline-six featuring three SU HS4 carburetors and mated to a four-speed manual gearbox with an electrically-actuated Laycock overdrive. The engine was rebuilt several years before the restoration by Malcolm Terry. Later modifications include a Pertronix electronic ignition system, an alternator conversion, chrome 72-spoke wire wheels, a CB radio, while other features also consist of fender-mounted mirrors, Lucas fog lamps, a stainless steel; badge bar, and a luggage rack and stainless steel exhuast.\nChrome veritical grille slats, suround and other chrome brightwork are shown up close in the gallery below. Spring service was carried out. This BT7 is offered with a British Motor Industry Heritage Trust certificate, soft tops, side curtains, a tonneau cover, records, and a clean Texas title in the seller's name. Refinishing in Guards Red over Old English white paint look outstanding with light khaki interior and matching Khaki carpets accented by chrome cockpit trim and a wood-rimmed Moto-Lita steering wheel. Equipment includes a heater, an adjustable steering column, a CB radio with antenna, a 12-volt charging port, and original 3 ring bidder service manual.\nWhite Smiths gauges include a five-digit odometer said to have displayed approximately 78k miles prior to the refurbishment, at which time I set back to zero. 47600 miles reading on od since restoration. This Austin Healey exemplifies what a true classic roadster feels like, you will not be disappointed. Please contact me for more information, additional photos and videos.[Email Seller]574-360-2747.https://www.youtube.com/watch?v=GNAPYrE4yzc&t=5s(copy and paste to your browser)On Sep-14-19 at 10:53:13 PDT, seller added the following information:", "label": "Yes"}
+{"text": "Antero Automotive & Truck Services - BMW Repair, Service and Maintenance\nYour BMW vehicle is a finely-tuned machine that was created by some of the most precise engineers in the automotive industry. There is pride that goes into making a BMW, and there is pride involved in owning one. At Antero Automotive & Truck Services, we understand that pride and our organization is uniquely qualified to repair, service, and maintain your BMW vehicle.\nWe Know BMW Vehicles\nAlong with having top quality ASE certified master mechanics on our staff, we also have a master mechanic who has been trained directly by BMW itself. There is no guesswork when we work on your vehicle. Our staff knows:\n- The BMW way to work on your vehicle\n- The quality parts needed to fix your vehicle right\n- Preserve that smooth ride BMW is famous for\nOnly The Highest Quality Parts\nOur parts department works closely with our BMW-certified mechanic to make sure that the parts we need to get your repairs done right are on hand or only a phone call away. When you need to have your BMW serviced, maintained, or repaired, we feel that it should only be done by the trained experts at Antero Automotive & Truck Services.\nRely On Our Experience\nAll of the work we do is covered by our own 24-month/24,000 mile warranty, and our technicians are more than happy to answer your questions. We offer a free shuttle service that allows you to drop off your vehicle and still get to work on time. Antero Automotive & Truck Services has the expertise and experience you can rely on to make sure that all of the work done on your BMW vehicle exceeds your expectations.", "label": "Yes"}
+{"text": "We are ICAR trained and certified specializing in automotive restoration. From automotive detailing services to dealer wholesale services, Surface Buff offers a wide variety of automotive services.\nWe do offer detailing and cosmetic repairs to the general public as well as dealers.\nAvailable vehicles for sale are available for sale to licensed dealers only. For any further information, please fill the form below and we can have one of our trained and certified automotive team members assist your automotive needs.", "label": "Yes"}
+{"text": "The 4th-generation Rexton introduced this year has a safer, stronger, more spacious and more stylish than ever aggressive front look\nMillennium SsangYong Motors Limited (MSML), the sole distributor of South Korea-based company Ssangyong automobiles, launched a new model of sport utility vehicle (SUV) Rexton 2020 in Bangladesh at the Millennium Centre in the capital on Friday.\nMSML Managing Director Intekhab Mahmud, Deputy Director (Sales) Farzana Khan, General Manager (Marketing and Customer Care) Imran Khan and other directors, department heads and senior officials of the company were present at the launching ceremony, said a press release.\nThe 4th-generation Rexton introduced this year has a safer, stronger, more spacious and more stylish than ever aggressive front look, it also said.\nIt comes with luxurious quality, contemporary exterior design, spacious interior, enhanced driver assistance and safety features.\nWith a Horse Power of 225ps and Torque of 350Nm, this 7-seater model has the best utility features one can think of, in a 2000cc Turbo gasoline engine vehicle, within Bangladesh automobile industry.\nThe new Rexton’s brilliant design features a high-performance power train, SsangYong's smart 4WD that provide outstanding driving performance and silence. It also employed state-of-the-art vehicle control technology, achieving the top-notch seating space, creative storage space and luxurious interior design, adding values as a family car with a sophisticated touch.\nIt is designed for families and as well as for SUV enthusiasts who are pursuing a vibrant and robust lifestyle and will appeal to people in need of a larger interior space for growing children and generous trunk space for their leisure equipment and daily chores.\nWith its unique and strong 4WD, Rexton has been strengthening its identity as 'A Solid Performer with Charismatic Flair'.\nThe latest model has been very well received internationally and is now making further inroads into local market, said organisers.\nAccording to the press release, Millennium SsangYong Motors offers an auto loan arrangement with banks and NBFIs, for the prospective buyers. This SUV comes with a 3 years/40,000km (whichever comes first) warranty package, coupled with four free services.\nEstablished in 1954, SsangYong Motors Korea is a Korea’s premium SUV brand.", "label": "Yes"}
+{"text": "Because images of a pizza whose cheese is glued to the top of the box due sloppy driving is on your mind every time you order delivery, Domino's has introduced a new fleet designed to protect your pie. The Ann Arbor-based chain has unveiled what amounts to a souped-up Chevy Spark, specially equipped with with a built-in warming oven and seating has been replaced to keep all your pizza, wings and bread sticks safe and sound.\nAccording to CNN Money, the fleet is known as the Domino's DXP (Delivery Expert), and the vehicles are capable of holding as many as 80 pizzas at a time. Just when we thought there were no more innovations in pizza delivery.\nUPDATE: We hit up a Domino's spokeswoman who shared with us some more details about this new fleet. In a statement, the company says the design and production of the Domino’s DXP took more than three years. Through a call for entries on the concept of the vehicle, Domino's received nearly 400 entries from designers all over the world. One hundred delivery cars will go to 25 markets across the U.S., including in Detroit over the next few months.\nDoes this new technology seem gimmicky? Maybe. But no more so than the pizza maker's other recent move to allow customers to Tweet their orders, a feature that further intertwines virtual reality with IRL. And hey, seems like it's about time for Michigan's two major exports, chain pizza and cars, to finally work together.", "label": "Yes"}
+{"text": "IndyCar's rule-makers are officially acknowledging what drivers have been complaining about all season: According to wind tunnel testing, Honda's aero kits put drivers at a competitive disadvantage compared to Chevy's kit. To rectify this, the series will grant Honda's request to revise its kit.\nBut don't think of this as charity on IndyCar's part. Racer reports that the decision was based on the conclusion that Honda's disadvantage is a detriment to the series.\n\"We believe the situation created major issues for our Honda teams, which were under pressure from their sponsors and shareholders,\" IndyCar boss Mark Miles told Racer. \"So we thought it was important to give them a chance to catch up because it was best for the overall health of IndyCar.\"\nThe decision came after full-size wind tunnel testing that compared Graham Rahal's Honda, shown above, with Scott Dixon's Chevrolet. \"We concluded the Honda aero kits on short ovals, road courses and street circuits were not competitive with Chevrolet,\" Miles said. \"But there was no aero kit competitive disadvantage in the superspeedsway configuration.\"\nHonda will now present the parts changes it desires, which will then be wind tunnel tested by IndyCar prior to approval ahead of next year's season. Chevy-powered teams won 10 of the 16 races during the 2015 Verizon IndyCar Series, leading 80 percent of laps and grabbing every single pole position of the season.", "label": "Yes"}
+{"text": "PUTZ, COOLIDGE MARCH TO THE WINNER'S CIRCLE AT BIR'S LUCAS OIL DRAG RACING SERIES EVENT BRAINERD, Minn. -- In final day of racing at Brainerd Int'l Raceway's NHRA Lucas Oil Drag Racing Series event, Richard Putz took the win in...\nPUTZ, COOLIDGE MARCH TO THE WINNER'S CIRCLE AT BIR'S LUCAS OIL DRAG RACING SERIES EVENT\nBRAINERD, Minn. -- In final day of racing at Brainerd Int'l Raceway's NHRA Lucas Oil Drag Racing Series event, Richard Putz took the win in Top Alcohol Dragster and Hank Coolidge grabbed the Top Alcohol Funny Car win. It was the first win of the season for both drivers.\nPutz, a resident of Earlville, Iowa, qualified in the No. 4 spot and made his best pass of the weekend in the first round today, running 5.377 seconds against William Zivkovich of Litchfield, Minn. In the semis he knocked off the top qualifier, Randy Meyer of Spring Hill, Kan. Putz made a 5.452-second pass but Meyer had red-lighted. In the final, Putz took on Jim Whiteley of Grand Junction, Colo. Putz's 5.415-second, 262.69 mph pass was enough to cover Whiteley's 5.493-second, 252.66 mph run.\nSunburst, Mont., resident Coolidge ran a pair of 5.67-second runs in the first two rounds of eliminations, knocking off Bruce Carlson of Prior Lake, Minn., and veteran racer Vern Moats of Des Moines, Iowa, respectively. In the final, he faced off against Paul Anderson of Erie, Colo. Coolidge ran 5.712 seconds at 254.04 mph to eclipse Anderson's 6.500-second, 155.13 mph pass.\nCordis Johnson, Springdale, Ark., drove his Comp Eliminator entry to the win, Super Stock racer Abe Loewen, Regina, Sask., took the win and Paul Schadt, Lindstrom, Minn., joined them in the winner's circle with his Stock Eliminator ride. In Super Comp, Dustin Long, Mitchell, S.D., earned the win while Eugene Belair, Princeton, Minn., took home the Super Gas trophy. Super Street competitor Rodger Sauder, Sidney, Neb., got the win, Jami Stoen, Owatonna, Minn., won in Top Dragster, Dave Slatten, Fort Collins, Colo., won in Top Sportsman and Toby Giese, Kandiyohi, Minn., rode his Sportsman Motorcycle to the win.\nWest Central division racers head to Denver for the next NHRA Lucas Oil Drag Racing Series event. Bandimere Speedway will host the series June 15-17.", "label": "Yes"}
+{"text": "By Doug Jack\nHeadquartered in Södertälje, Sweden, Scania is one of the oldest and most respected brands in the European commercial vehicle industry. The company dates back to 1891 with the Vagnfabriks family who built railway carriages and wagons following the dramatic expansion of the Swedish railway network in 1880s.\nScania opened in 1900 in Malmö in the south of Sweden. It produced its first car in 1901 and was building its own engines and light trucks by 1905. Although Scania enjoyed considerable success, it lacked resources and merged with the Aktiebolagest and Södertelges families of the Vabis enterprise in 1911 to form Scania-Vabis. The early trucks were sturdy models built to withstand the Swedish climate.\nOne chassis featured an enclosed passenger compartment with the roof extended forward to create a canopy over the driver sitting behind a full-height vertical windshield without protection on either side.\nIn the early 20th century European buses were predominately on high truck-based chassis before the industry moved toward specialized designs that featured lower frames and maximum space for passengers. Customers demanded larger and more powerful buses and Scania responded in 1932 with the strong Bulldog.\nAlthough Scania built some vehicles with heavy oil engines, its first successful diesel appeared in 1936. Its bus output of buses surpassed trucks while its production of cars ceased around 1927.\nIn the early 1950s, Scania crossed the Atlantic and struck a deal with Mack to build the Metropol integral city bus in Sweden. The Metropol had an eight-cylinder engine mounted transversely at the rear and retained its typical American styling, with small windows above the main side windows.\nThe Metropol, with its long American wheelbase, was not ideally suited to Swedish conditions, and the company developed a shorter version known as the Capitol, the first Scania fitted with air suspension.\nBy this time, Scania had successfully exported buses and trucks to Brazil and established a factory to manufacture chassis and engines, with an increasing percentage of Brazilian-built content. Buses and coaches came with the option of front or rear mounted engines.\nIn 1966, with Sweden and Denmark at the forefront of developments to reduce noise and emissions, especially in vehicles working in urban areas, Scania launched the CR76 city bus, a totally new integral design without any influence from Mack. This was a landmark model with a lower floor and an exceptionally quiet rear-mounted diesel engine. Scania updated it to the CR111. The “silent” bus launched in 1971.\nThe move in Sweden from right- to left-hand drive created a boom in demand for new buses and coaches. In 1968 the company purchased one of the largest bodybuilders, based in Katrineholm, about 60 miles west of Södertälje. After its production of integral vehicles, Scania started building chassis assembly in 1969.\nWith Sweden’s concern for the environment becoming more significant, Scania looked to alternative and renewable fuels. It introduced the first city bus to run on ethanol in 1986. Scania has since sold more than 700 of these buses in Sweden, principally in Stockholm. At first fuel production came from the European Union’s “lake” of surplus wine. More recently the Swedes have found a way of producing fuel from the sap of pine trees.\nWith the factory in Katrineholm losing money at the start of this century, Scania brought its chassis assembly into a dedicated unit in the main truck plant while transferring the assembly of bodywork to a facility at Slupsk in the north of Poland, benefiting from much lower labor rates than those in Sweden.\nThis decision transformed the fortunes of Scania bus operations and everyone in the main factory began to think in terms of truck and bus.\nScania is an incredibly disciplined engineering and manufacturing company. For instance, the company makes five-, six- and eight-cylinder engines all with the same cylinder dimensions, which enables Scania to benefit from economies of scale and keep its parts count to a minimum. On a coach chassis, up to 80 percent of the units share a commonality with the truck family.\nCity buses are different because they require drop center rear axles and fully automatic gearboxes from specialists such as ZF. A remarkable range of products incorporate combinations of three front modules consisting of the front axle, suspension and driving controls with rear modules which carry the axle, suspension and driveline. For instance, by marrying a low height front module with a twin axle rear module, Scania can offer a double deck coach chassis.\nScania assembles interurban and luxury coach chassis in Sweden and city buses in Poland, as well as at factories in Brazil and Mexico. For a number of years the policy has been to introduce new models simultaneously in all its factories. If it must fulfil a major order on short notice, it can supply chassis can from more than one factory with identical specifications.\nScania’s main activity is building chassis. It makes its own city bus bodywork in Poland in single and double deck versions. Whereas the factory in Katrinholm had been building in steel, the new Omni range is aluminium: a cleaner and less labor intensive system that also saves weight.\nScania also collaborates with many bodybuilders around the world. Some of them are essential partners, because they hold the key to sales in their domestic markets. Nevertheless, Scania’s relationships with bodybuilders numbered more than 100. Of those, the last 30 are building only in very small numbers, which leads to disproportionate costs.\nMelker Jernberg, head of buses and coaches, is tackling this problem by working more closely with a limited number of bodybuilding partners. His program, Strategy 20+, has already produced some interesting results.\nScania has ruled out assembling and manufacturing chassis in China, but has established a close collaboration with Higer, one of the largest bus builders. It imports complete chassis to Higer for use in the highest quality luxury segment at the top of the Chinese market. In 2006, the two companies established a separate unit within the vast Higer factory in Suzhou to build luxury coaches jointly for export markets, including selected countries in Europe. The Scania Higer Touring created a sensation in its debut at Busworld Kortrijk in 2009.\nIn another example, Scania contracted the Finnish bodybuilder, Lahti, to build the OmniExpress coach.\nAlthough intended primarily for long distance express services in the Nordic countries, customers in several European countries have ordered the same model for private charters and tours.\nJernberg says his ambition is to develop further strategic partnerships, because more and more customers are demanding complete buses and coaches from the same supplier. Although production fell back during the global economic crisis, bus and coach volumes held up much more strongly than trucks, and there is an ambitious target of 15,000 units by 2015.\nAs a final note, although Scania has no plans to enter the North American market, it signed a major agreement last year with Terex to supply engines, which meet the latest emission standards for installation in construction equipment. It is now establishing parts and service networks throughout the United States to support this valuable contract.\nDoug Jack is with Transport Resources in the United Kingdom.", "label": "Yes"}
+{"text": "Paving the Way for Endless Possibilities\nBefore you even enter one of our wheelchair accessible vehicles, you will undoubtedly notice the Rollx Vans difference. For our minivans, all it takes is a push of a button, the vehicle lowers as the door automatically slides open, revealing a ramp tucked away in the floor.\nWith the conversion process our minivans go through, the bottom of every van is lowered, providing superior head room, leaving you with a van that simply feels bigger.\nFor full-size vans, you will find a lift on the side door that will raise a passenger with a wheelchair directly into the van. Full-size vans can either have the floor lowered or the ceiling raised, providing an even more spacious atmosphere than our minivans.\nOur handicap accessible vans can be configured to put you in the driver’s seat with little effort. With our 6-way power seats, the driver or passenger’s seat can swivel around an entire 180 degrees, providing easy access to move from a wheelchair or scooter to a front row seat.\nThe steering column can also be configured with hand controls, zero-effort steering, touch-pads, and more. With the right equipment, an entire van can be driven and maneuvered with the simplest of hand movements.\nEnjoy the Ride\nFor wheelchair seating throughout the entire minivan or full-size van, we offer a variety of tie-down securements to make sure you stay safe and still during a drive. For more information on the different types of securements we offer, click here to watch a video.\nCustomized for Your Convenience\nWe know every one of our customers has their own unique situation, which is why we cater our vans specific to each one of them. This means you can customize just about any feature you can think of including seating arrangement, flooring, chair coverings, sound system, ramp style, and the list goes on and on.\nWhatever wheelchair accessible van you need, Rollx Vans will craft it for you. Our skilled engineers know full-size and minivans from the inside out. Our conversion process is second to none. Our safety standards exceed national mandate and your mind will be at ease knowing you are riding in a van specifically created for your comfort and safety.\nReconditioned to Perfection\nEven our used minivan and full-size van options stand out from the rest. Our used models go through an entire reconditioning process that is much like the conversion process our new vehicles go through. Which means, we recondition our used vehicles to be as good as they were when they first rolled off the lot.\nWe go above and beyond to update all the finer details including flooring, seating configurations, and any custom options the new owner chooses. This includes custom changes like securement type, the addition of hand controls, and even updating the ramp.\nSimply put, our handicap accessible vans are the most accessible vehicles you can find on the road. Call us today to get your new accessible vehicle started or click the link below to see our inventory of new and used vehicle options we have available today.", "label": "Yes"}
+{"text": "AUDI A4 2006 REPAIR MANUAL\nAudi A4 Workshop and Owners Manual | Free Download\nThe first of the A4 generations succeeded the Audi 80. Its treated as a continuation of the Audi 80 lineage by the auto maker Audi. The A4 layout has a longitudinal engine orientation at the front and a transaxle type transmission mounted at the rear of the engine.\n2006 Audi A4 Workshop Repair Service Manual - Best Manuals\nJun 11, 2019This Manual contains everything you will need to Repair, Maintain, Rebuild, Refurbish or restore your 2006 Audi A4. This is the full quality Workshop Manual in PDF format not a poor scan of paper manual. It is exact same manual used by technicians at the dealerships to Maintain, Service, diagnose and Repair your Vehicle.\nAudi A4 Service Repair Manual - Audi A4 PDF Downloads\nMotor Era offers service repair manuals for your Audi A4 - DOWNLOAD your manual now! Audi A4 service repair manuals. Complete list of Audi A4 auto service repair manuals: Audi A4 B5 1994 Factory Repair Manual; Audi A4 B5 1994 Factory Service Repair Manual PDF; Audi A4 B5 1994 Factory Service Repair Manual ; Audi A4 B5 1994-2001 WORKSHOP MANUAL\nDownload Audi A4 service & repair manual - YouTube\nClick to view on Bing1:12Oct 10, 2017Visit Zofti for more manuals: https://eni Download the Audi A4 workshop, service and repair manual in English and pdf format. The manual with information for cutting and repairing the vehicleAuthor: Zofti ENViews: 7\nAudi A4 Service Manual: 2002, 2003, 2004, 2005, 2006, 2007\nFeb 23, 2016The Audi A4 Service Manual: 2002-2008 contains in-depth maintenance, service and repair information for Audi A4 models from 2002 to 2008 built on the B6 or B7 platforms. Service to Audi owners is of top priority to Audi and has always included the continuing development and introduction of new and expanded services.3.8/5(47)Price: $117Brand: Bentley PublishersAuthor: Bentley Publishers\nAudi A4/S4 repair manuals - Audi A4/S4 Factory Manual\nAudi A4/S4 Repair Manuals. Audi the German car manufacturer’s compact executive range of cars, Audi A4 1 rd generation B5 was launched in 1994, as a subsidiary to the Volkswagen Group. Its popularity is unmatched by several other brands and its uniqueness deservingly demand its factory manuals to deliver the exact efficiency as the car itself.\nAudi Workshop and Owners Manuals | Free Car Repair Manuals\nAudi Workshop Owners Manuals and Free Repair Document Downloads Please select your Audi Vehicle below: 100 200 50 80 90 a1 a2 a3 a4 a4-allroad a5 a6 a6-allroad a7 a8 cabriolet coupé coupe q3 q5 q7 quattro r8 rs2 rs2-avant rs3 rs4 rs5 rs6 rs7 rsq3 s1 s2 s3 s4 s5 s6 s7 s8 sport-quattro sq5 tt tt-rs tts v6 v8 workshop\nAudi Workshop Manuals\nWorkshop Repair and Service Manuals audi All Models Free Online. Audi Workshop Manuals <<Acura (Honda) Workshop Manuals<< >>BMW Workshop Manuals>> Free Online Service and Repair Manuals for All Models Quattro Wagon V6-3 (BKH) (2006\nAUDI A4 OWNER'S MANUAL Pdf Download.\nView and Download AUDI A4 owner's manual online. A4 Automobile pdf manual download. On-board computer Resetting the service interval display Your Audi dealer resets the display after each service. You can only Applies to vehicles: with on-board computer reset the oil change display yourself. To do this, select function Introduction selector\nPrint & Online Audi Car Repair Manuals - Haynes Publishing\nAudi Car manuals. The four rings of the Audi logo each represent one of four car companies that joined to create Audi's predecessor company, Auto Union. These were Audi, DKW, Horch (August Horch’s first company), and Wanderer. Post-war, the company’s small two-stroke cars were far from the luxury offerings it builds now.\nRelated searches for audi a4 2006 repair manual\n2009 audi a4 repair manual2006 audi a4 manual pdf2006 audi a4 owners manual2002 audi a4 manual2009 audi a4 service manual2004 audi a4 manual pdf2007 audi a4 manual pdfaudi a4 service manual pdf", "label": "Yes"}
+{"text": "To give you a little perspective using my car as an example.\nAll Stock - Dynos 362 whp on a DynoJet\nFull Exhaust HFC's, tune and 20\" wheels - The car dynoed 347 whp on a DynoJet\nSo there is a significant difference\n-2015 AW M4 and 2014 G63\n-(2012 | Laguna Seca Blue | Rust Brown | Individual | 6MT) SOLD", "label": "Yes"}
+{"text": "First Million Dollar Car Of Ford Cannot Be Driven On The Road\nThe first million-dollar Ford has come. The Ford GT Mk II is a track-day version of the GT car that’s extra highly effective and provides better handling than the road car. It’s not road legal, neither is it licensed for any racing collection. As an alternative, it’s certainly one of a brand new variety of supercar that lives between the two worlds and is mainly meant for entertainment. The GT Mk II includes a 700 hp version of the GT’s 647 hp 3.5-liter turbocharged V6 and is given with additional cooling options, together with a water spray for the charge air cooler and roof-mounted air consumption. Its aerodynamics package deal has been changed with a big wing and a watch on enhancing downforce, and it runs on a set of Michelin Pilot Sport slicks. The cabin is supplied with two Sparco racing seats, a roll cage, and a performance computer.\nApart from the ability to generate cornering a great deal of 2g, Ford hasn’t detailed its efficiency specs. However, the stock GT can hit 60 mph in 3 seconds and tops out at 216 mph, whereas rules limit the racing GT to about 500 hp.\nFord will only construct 45 GT Mk IIs priced at $1.2 million each. The usual model costs $450,000, and the GT line might be limited to 1,350 automobiles earlier than its producing run ends in 2022.", "label": "Yes"}
+{"text": "Renting a car in Dubai can be an overwhelming experience, but with the right app, you can be on your way to exploring this incredible city in no time.\nDubai is one of the most exciting cities in the world with so much to see and do.\nFrom malls to markets, the city has something for everyone! Renting a car is one of the best ways to explore this vibrant metropolis.\nBut before you jet off, here’s everything you need to know about the Car Rental App Dubai.\nBest app for cheap car rentals – The Details\nYou might think that renting a car in Dubai is hard, but it’s actually quite easy!\nDubai has many car rental companies and they operate on a 24/7 basis.\nIn addition to the traditional car rental companies, there are a variety of apps to help you find what you’re looking for.\nOne of the most popular apps is Car Rental App Dubai which lets you search for the best cheap deals and compare them side-by-side.\nThe app includes all key features:\n- Full list of cars, vans, and SUVs available in Dubai\n- Deals and offers are updated daily as well as high demand vehicles\n- Filters to help you find your perfect vehicle\n- Automatic quotation based on your preferences\nThere are plenty of reasons why renting a vehicle is the best way to explore Dubai.\nFrom driving around Deira with friends to exploring the desert terrain at sunset, cars provide a more personalized experience for travelers. It’s also cheaper than taking taxis or public transportation all day long! And with an app like Car Rental App Dubai, finding what you need couldn’t be easier.\nWhat You Need to Know About Renting a Car in Dubai\nRenting a car in Dubai is an experience unlike any other. You can explore the city with little restriction and easily drive through busy traffic.\nBut before you make your reservation, there are a few things you need to know.\nFirst, rental prices will vary depending on the company, the length of time, and the type of vehicle.\nHow to Rent a Car in Dubai\nThe process of renting a car in Dubai is fairly straightforward. You’ll need to provide your driving license and credit card, as well as leave your passport with the rental agency.\nThere are several things you should know before renting a car in Dubai, however. First, there are a few different types of licenses you can rent, depending on how long you plan on staying in Dubai.\nIf you will be here for less than 1 month, then an “A” license is all you need. This license allows you to drive for up to 12 hours per day (a total of 14 hours per day) and doesn’t need to pay any extra fees or taxes.\nIf you will be staying for more than one month, then an “A-1” license is required. This license also allows for driving for up to 12 hours per day but does not allow any additional driving time after 12 hours.\nBest app for car rental in Dubai\nThere are many apps available to help you rent a car in Dubai. But if you’re looking for the best app, we recommend the Best car rental app.\nThis app is designed to provide the highest level of customer service at the most competitive rates in Dubai.\nYou can find all available rental cars as well as detailed information about renting them on this app.\nRenting a car in Dubai with these cheap car rentals is a very easy and straightforward process.", "label": "Yes"}
+{"text": "I am pleased with my 2005 4 door Chevy Colorado. It's got plenty of power for my needs - good acceleration which comes in handy in traffic - The 4 door King cab is nice - I have already gotten a lot of good use hauling 4 adults comfortably on short trips around town. It is a bouncy little truck - which is what I had expected without a load. I haven't hauled much in the bed yet - but recommend adding a bed cover, as I did. It improved my gas mileage from an average of 18 to 22. 90% Highway driving. Overall - very pleased so far within my first 15,000 miles.\nDave - Las Vegas, NV05/02/2010\nQuite decent vehicle. Fits my requirements. A 'noise' when shifting at times, said to be backlash. Asked Chevy to check it out and they said not an issue. All in all good.\nNice truck - hard on the fuel\nMcKenna1 - Summerfield, NC11/24/2011\n1st pickup truck I've ever owned. Use it for a daily ride in lieu of a 370Z-R. Extended cab is helpful with fold up seats and integral tool boxes. It has the inline 5 cylinder that I find out after the fact that it is not so good in the fuel economy department. It won't get a lot of miles, so I can live with this. Overall a nice truck that I do enjoy driving. Oh by the way it is a Patrol Yellow, so finding it in a large parking lot is not difficult.\nThere’s something about a car that goes vroom that can’t be beat. When you’re sitting behind the wheel of a powerful car, your heart races and your mind wanders to all the places you can go. There are plenty of used cars out there that deliver high horsepower for low prices.\nLooking for a vehicle with a rugged, spacious design? Hybrid SUVs can offer you the best of both worlds! Explore our list of the best-selling hybrid SUVs on our lots from January 1, 2017, through October 31, 2017.", "label": "Yes"}
+{"text": "Select cars to compare from your search results or vehicle pages. It’s an icon of JDM culture, but is there more to the Toyota AE86 than genuflecting at the altar of Initial D? All pumps are Recoloured, vapour Blasted, all metal parts Replated & Bench tested for fuel Flow, pressure & Vacuum . The 308 XT5 was mainly fitted to the VC HDT Brock Commodores. Many more photos will be available soon. Basic chrome tall rocker cover x1 pair Only selling as I was supplied these ones instead of chev ones, & couldn’t return.\nSpecification Holden Engine Rebuilds Holden Stroker Turn Key Engines. $5,464.80 + buy now.\nmonday to friday It was a reality, built by Holden engineers Leigh Maguire and Mick Webb as an experiment to show that the V8 could be given a high-tech makeover to appeal to overseas export markets. HOLDEN HQ - WB 253 308 TRIMATIC AUTO BOX WITH CONVERTOR this was in running order when removed from car but it has been setting for years in shed so i would be servicing the gear box before use so selling as a second hand box untestedbut i can services it or recondition it for extra cost Suits the following Engines: Holden 253 253ci V8 OHV 2v 01/1969 - 01/1984 Holden 308ci V8 OHV 2v 01/1969 - 01/1988 Holden 5.0L 4987cc V8 OHV EFI 2v 01/1985 - 07/1999\nThe engine development was done by the Repco Engine Development Company (REDCO). New Genuine.\n202 flex plate x1 Silins used an HR for testing, but it was later replaced with an XT Falcon. 4. 6. Direct Deposit. The LS1-powered VU was introduced in December 2000. Holden NEW ACL Bearing Set Part Number: 5M2357-010. Please call or sms for any more info. High Performance world offer a selection of premium performance brand new crate engines that are ready to go today OR we can custom build a crate engine with power, torque and performance matched to your exact specifications. The overhead cams were driven by timing chains that took their drive from the a sprocket mounted on the original camshaft. Sign-up here for your free weekly report on the world of Street Machine, Custom LS3-powered Holden Overlander tribute, Mark Allen combined a Patrol, a VE Maloo and an HX One-Tonner to build a modern-day tribute to the Holden Overlander, We caught up with Bradley See and his HK Monaro GTS at Red CentreNATS 5, Randy Neos has owned his Holden VK Calais for 29 years, Ken Crockett's LS1-powered 1956 FJ Holden, It's taken 13 years for Ken Crockett to build his dream FJ Holden, By Norm Darwin | Photos: SM Archives, 21 Jun 2017 Features.\nPerkins had Holden homologate a new head and stiffer block, allowing him to make full use of his slide throttle manifold. History of the Holden V8 part one: Red motor 253/308 After February 1984 (VK series) the 308 engine block casting designation changed to 5.0, and the 253 was dropped. H253HP1-HPricing does not include engine core cost(change over required).\n- In part two of our History of the Holden V8 feature, we look at the blue series motor of 1980, right up to the last Aussie-built Holden V8 of the VT Commodore and VSIII ute. Pay fortnightly, enjoy your purchase straight away!\nThe V8 engine was now coded LB9 and all versions of the 5000 V8 used the GM Delco MPI EFI induction system.\nH253HP1-SUBPricing does not include engine core cost(change over required). Holden tried to get the 253 into the HK but as 1968 dawned it was obvious that the Holden V8 would not be ready.\nRochester Quadrajet Carburetor ( 7 ) would suit SBC/Holden 253/308 I have not used this carburettor & will require a vacuum can (plastic is broken) Image is 'EXAMPLE ONLY' SOLD AS IS NO warranty expressed or implied. The Group A era saw the Holden V8 de-stroked to 304ci to meet homologation. gm performance crate long engine 350ci / 290hp 8.0:1 comp fits sb chev . Cleaned, crack tested, new bronze valve guide liners, surfaced, valve seats machined with special contoured profile & mild ported, assembled with new larger valves, valve springs, retainers, collets and corrected spring pressures. The L34 was a Repco-developed 308 with 9.8:1 compression ratio, free-flow exhaust, modified heads and twin-point distributor.\nThe Plastic Pig - VL Group AHolden’s post-Brock solution was the HSV Group A. In September 1981, in VH Commodores, an optional V5H 308 was released with 177kW@4700rpm and 418Nm@3500rpm; this was a significant achievement as this rear-wheel number now equalled the flywheel power of the original 308.\nAll Rights Reserved. Holden Commodore VE VF LFX 3.6L V6 Motor Crate Long Engine HFV6 NEW … and BH103 rotor Button ........ we have all 3 for sale GB828, 830, 833 __ $380 GMH forecast that by 1970 35 per cent of Holdens sold would be V8s, rising to 50 per cent by 1975, which gave Holden engineers Fred James and Ed Silins plenty of justification to come up with their own design.\nSign-up here for your free weekly report on the world of. A high-performance kit was also available through dealers. Our Engine Compatibility tool is to be used as a guide only. Over the next 30 years, more than 541,000 V8s ran down the transfer line at Fishermens Bend until 28 June 1999, when it was replaced with the LS1. Pictures are extent of what is available in sale. The WhichCar Network: Everything car buyers need and car lovers want.\nsku: gm19355658. Note the oil filler on the timing gear case – this was relocated to the rocker cover from the HQ onwards. Our Engine Compatibility tool is to be used as a guide only. During the life of the VL series, HSV released a Group A EFI version of the LV2 engine. Bell housing for a holden 253 to celica steel case box, box is not included. This series was painted black. These are our most popular Holden engines, but we can design and construct a custom engine for any application from street to competition, please call to discuss your project. Commercial Sales, Leasing & Property Mgmt, Residential Leasing & Property Management. “What you get” with your Custom Crate Engine is a precision machined, blueprinted and balanced engine using the best components for the level that your engine is designed for, no short cuts, no exceptions. This change involved a new crankshaft, rods, pistons and cam.\nThe HR was first driven on 5 June 1967.\n............ READ THIS WHOLE AD BEFORE MAKING CONTACT ................... please check on the individual parts description to ensure this suits your requirements, if you are unsure, please contact the EMA sales team. Including: High volume oil pump, Chrome rocker covers, oil cap & breather and a K&N oil filter. Group A was not initially kind to the VK, but the privateer team of Allan Grice and Graeme Bailey broke through to win Bathurst in 1986. Sticking with the Holden V8 in cars that had them as optional equipment saves the trouble of engine conversions, and many people reckon they just sound better than an LS-based engine. The Maywebb engine (an amalgam of its creators’ names) was fitted to a Calais mule and by all reports did everything that was asked of it, but political realities within GM saw it quietly shelved. The Holden 253 HP1 engine kit includes a fully machined, blueprinted, & balanced un-assembled short block kit. HOLDEN TORANA /HQ 253 MANIFOLD/ CARBY PREPOLLUTION Pick up from Yarrawarrah, in the sutherland shire. New Genuine.\n253 - Holden 253. Perkins took pole at Bathurst that year and he and co-driver Gregg Hansford won the race, after an epic battle with the Gibson Motorsport pair of Jim Richards and Mark Skaife. It was a hot version of the mighty thong-slapper too, with 10.1:1 compression, a big cam and solid lifters, making a claimed 240hp. HOLDEN HQ -WB 253 308 TRIMATIC AUTO WITH CONVERTOR, FOR SALE © Copyright Are Media Pty Limited. 2. Dyno’d, Run-in and ready to install! Silins was born in Latvia, graduating in 1940 with a doctorate. The big-ticket items were brand-new heads, a new cam, and the fuel inejction set-up, including the famous twin-throttlebody intake manifold. Pick up only from back of endeavour hills area, will not post Our Engine Compatibility tool is to be used as a guide only. 253/308 standard flywheel x1 Can swap if you want fb-fc-fe-fj-fx-ek-eh-ej-hd-hr-hk-ht-hg-hq-hj-hx-hz-wb-ta-hb-lc-lj-lh-lx-uc-torana-gtr-xu1-xu2-ss-s-l-sl-slx-sle-sunbird-brougham-a9x-hdt-brock-special-triple su-stromberg-sprintmaster-kingswood-premier-statesman-deville-caprice-belmont-gts-monaro-ssv-banjo lsd-powerglide-trimatic-m20-m21-aussie 4spd-sandman-hsv-vb-vc-vh-vk-vl-vn-vq-vg-vp-vr-vs-vt-vu-vx-vy-vz-ve-vf-slr-manta-s, INLET MANIFOLDS (holden -ford-valiant v8 6cly), FOR SALE RECONDITIONED INLET MANIFOLDS TO FIT;; FORD XB XC XD CLEVELAND 351 302 2V THIS MANIFOLD HAS BEEN SANDBLASTED ,MECHINED FACE, HAS BEEN REPAINTED IN FORD BLUE ,AS NEW BRASS VAC FITTINGS, NEW BOLTS AND CARBY STUDS,AND VALLEY PAN PLATE, AND GASKET KIT , PRICE $400.\nGon Nen Back, Lunar Quasar 546, Amy Bruce Steve Bruce, Abby Modell Net Worth, 3x6 Grow Tent, Metric Thread Dimensions Calculator, Morbius Streaming Vf, Selle De Wyvern Ark, Washington Island Golf Course For Sale, Real Racing 3 Money Farming, Blagues Longues De Toto, Shed Prices Near Me, Prodigal Spouse Testimonies, Baroque Friesian For Sale, Where Is Jamie Dukes Now, Cuisinart Air Fryer Toaster Oven Problems, Where To Paddleboard In Sedona, Citizenship Test In Spanish, Trust Me Fnaf, Camera Arduino Nano, Wintley Phipps Wife, Souk Nabeul 2019, Short Mood And Feelings Questionnaire In Spanish, Horrible Accidents Death Videos, Broke Boi Producer, Hawaiian Word For Friend, Toyota Camry Torque Specs, Refugee Alan Gratz Lesson Plans, Uninstall Filebeat Deb, How To Install Apps On Tcl Linux Tv, Tout Petit Bain En 11 Lettres, Paranormal Vs Supernatural Genre, Cherish Net Worth, Aiden Name Meaning, North Dakota Salamander, Clean Bandit Stephanie Benedetti, Kerr Mason Jars 24 Oz, Why Is Kiehl's So Expensive, Tama Iron Cobra Power Glide Vs Rolling Glide, Dean Guitar Manual, Canal 34 En Vivo, Huda Beauty Pro Discount, Convector Radiators Btu Output, Elders Weather Victoria, Chime Bank Address, Compton Crime Rate, Craigslist Homes For Rent San Antonio Tx, Hmas Waterhen Induction, Tera Valkyrie Crit Cap, Heat Of Combustion Of Methane, Jeff Padalecki Wife, Dave Galafassi Date Of Birth, Doves Zimbabwe Vacancies, Best Shooting Guard Build 2k20 Reddit, Evelyn Name Meaning, The Lego Ninjago Movie Google Drive Mp4, Bobby Brown Son Died, Dean Schneider Death, Ian Rapoport Salary, Sam Eagle Gif, Remington 7400 Magazine Cabela's, Kaycee Sogard Maiden Name, Best Warframe For Melee, Blue Text Generator Online, Boesemani Rainbow Fish Temperature, Public Hunting Land In Wyoming County Wv, Dinero Sucio Y Amor Capitulo 1, Exxon Webcat Login, Navigating Early Symbolism, Karmiel Israel Real Estate, Vape Pen 510, Oc Meaning Meme, Asake Bomani Ethnicity, Camera Arduino Nano,", "label": "Yes"}
+{"text": "Badly built rocket on wheels made out of tin\nThe handbrake mechanism froze up in the cold weather, two days later the handbrake stopped working altogether.\nDealer staff are complete idiots, forgot to put the oil filler cap on after a service. Thankfully no damage done. Dealer wouldn't give any sort of refund on the service bill after the car had to go back to them to be cleaned and for a new oil filler cap.\nWould you buy another car from this manufacturer? No\nReview Date: 5th February, 2001", "label": "Yes"}
+{"text": "Cyan Racing caught everyone by surprise when they first revealed their Volvo P1800 restomod, a stunning creation that transforms the original 1960s coupe into an exotic driving machine.\nThe amount of work done here is pretty exhaustive, starting with the body and chassis; while Cyan’s restomod retains the beautiful lines of the classic Volvo coupe, the body is entirely new and made out of carbon fiber while the chassis is also redesigned and strengthened using modern high-strength steel. The only parts that are still original to the donor car are the roof pillars and the windscreen wipers.\nRead More: $500,000+ Volvo P1800 Cyan Restomod Shows Off Its Interior For The First Time\nThe end result of all this work is a front-engined, rear-drive coupe that tips the scales at just at 990 kg (2,182 lbs).\nCyan Racing also ditched the original rear live axle for double wishbones and added a torque-biasing limited-slip differential while they were at it. That was necessary because under the bonnet now lives a 2.0-liter turbo four-cylinder engine as used in the Volvo S60 TC1 race car, paired to a dog-leg five-speed manual transmission from Holinger.\nThe engine has been further tuned to provide a more linear power and torque curve, like a naturally aspirated unit, with its redline sitting at 7,700 rpm. Power is rated at 413 HP (419 PS) and 335 lb-ft (455 Nm) of torque, which appears to be more than enough for that weight figure.\nAutocar had the opportunity to review the gorgeous Volvo P1800 Cyan and their impressions are more than positive. The beautiful restomod is as good as we hoped it be, offering a raw driving character with one of the greatest manual gear changes around, big unassisted brakes, and no ABS or traction control. Combine this with an excellent high-quality feeling inside and out, and suddenly that price tag starts to make sense.\nAs a bonus, we are also sharing AutotopNL‘s POV video on the same car, just to get a better idea of what it feels like behind the wheel of Cyan’s gorgeous P1800.", "label": "Yes"}
+{"text": "Blythewood, SC: Rounds eleven and twelve of the 2003 Formula Ford 2000 Zetec Championship are now in the record books. The final two races of the season were held October 16 and 17 at the ever-challenging and beautiful Road Atlanta in...\nBlythewood, SC: Rounds eleven and twelve of the 2003 Formula Ford 2000 Zetec Championship are now in the record books. The final two races of the season were held October 16 and 17 at the ever-challenging and beautiful Road Atlanta in conjunction with the Petit LeMans. Nineteen-year-old University of South Carolina student Andy Brumbaugh was a front-runner all week and finished the season with very solid third and fourth place finishes in a highly competitive field of 25 cars.\n\"Cape Motorsports gave me a good car all week,\" said Andy. \"This season has not gone the way I had planned. We did not have the budget for testing, other drivers took me out of races and my seat time was minimal. These were probably my last open wheel races and I really wanted to remind people what I can do with a formula car. I am working very hard on a career switch to sports car racing for next year.\"\nDominic Cape, President of Cape Motorsports said, \"This was a really strong weekend for Andy. Andy had to skip the series test here last month for the Red Bull tryout so for him to come in here without that track time and run like he did is very impressive. I think he had something to prove after a very unlucky season.\"\nAndy LLC President Candy Brumbaugh said, \"I was concerned about Andy. He drove to Road Atlanta alone and with the flu. There were lots of friends and family coming to the race as well as other racing business to take care of. He really stayed focused and was a true professional. I can't believe it is over. I'd like to thank Jon Baytos and the entire series staff for putting on what is clearly the premier formula car ladder series.\"\nBrumbaugh is a five-time karting champion, N.A.S.A. Formula Ford champion, SCCA National Champion and Canadian Pro Formula Ford Champion. Andy won the highly competitive and prestigious Canadian Formula Ford Championship in 2001 at the age of 17. He is the first American and the youngest champion in history, winning in his rookie season to also take Rookie of the Year. He broke all the records of great drivers like Paul Tracy, Alex Tagliani, Scott Goodyear and the late Greg Moore. Late in 2002 he was selected by Porsche to test for the factory at their new track in Leipzig, Germany. In 2003 Andy is competing in the Formula Ford 2000 Zetec Championship with the vaunted Cape Motorsports as well as racing historic Porsche's with Amalfi Racing.", "label": "Yes"}
+{"text": "▷ Door to door\nDoor-to-door auto transport is exactly what it sounds like and precisely as convenient. When arranging for your car to be shipped, you are mainly concerned with safety, timing and cost. Even though the door-to-door delivery service is not the cheapest option out there, it is the most efficient and secure one. What it essentially means is that you, or a person designated by you, will be meeting the driver directly at the time of pickup and delivery. No third parties will be involved. This puts you in total control of your shipment and the personal items you might be shipping in the cargo area. You could inspect the vehicle thoroughly yourself and make sure you mark any preexisting damage or just peculiarities everyone involved in the process should be aware of.\nAn important condition for a smooth and effortless transportation service is that the pickup and delivery locations are accessible for large trucks. The driver responsible for your vehicle will get as close to the desired street or meeting point as physically possible. Keep in mind that low hanging tree branches and electrical wires can make it impossible for a truck to manoeuvre safely and this is something all transport companies have to deal with. Other reasons why the truck might not get precisely to your door could be that your driveway is too narrow or that the city you live in has restrictions on large trucks getting into residential areas. When you talk to your SGT Auto Transport representative, make sure that you discuss your particular situation and you know if the truck will be able to get exactly to where you want it. If your representative confirms that the trucker won’t be able to make it, you will have to meet him somewhere convenient for both of you. It could be a shopping centres’ parking lot, a truck stop, a larger street nearby or anywhere you know big trucks could get without a problem. You can either have us tell the driver where he will be meeting you once we assign him or you could arrange that with him directly once we provide you his contact information.\nDirect shipping is a lot more efficient and reliable than all other all other types of transport, and especially than terminal-to-terminal. Yes, there are situations in which this could be a good solution but for most people it isn’t. It increases transit time significantly and you don’t really know who will be driving the vehicle—if it’s going to be only one person or multiple drivers, etc. As we all know, the more people are involved in a process, the bigger the chance that something goes wrong. Also, the drivers doing terminal-to-terminal shipments sometimes wait for their trucks to be fully loaded to get going. This could take a lot of time and cause you unnecessary stress and inconvenience mainly because you won’t be getting frequent updates. With door-to-door, you know your driver’s name, you can talk to him or her directly at any given time—or, if you prefer, you can have us contact him or her for you. Moreover, the driver won’t wait and is ready to get on the road once he is assigned.\nWhen considering direct car shipping, you should take into account that you will need another vehicle to go get yours. If you have multiple vehicles in your household, this could be less of a problem (although your spouse will probably need their car to go to work and drop off the kids to school). This is not something you have to think about because the driver will drop off the car right to your doorstep. It’s efficient, easy and as stress-free as possible.", "label": "Yes"}
+{"text": "Chrysler/Jeep held an 8-hour press conference on November 4th while I was at the SEMA show, talking about the focus that they are putting on the company in the next few years. Some interesting stuff came out of the conference, which I’ve pasted in for you to read about the future of Jeep.\nIf nothing else, I’m RELIEVED to hear that there is indeed no IFS and/or IRS suspension’d Wrangler being released any time soon. I’m not surprised that the Compass and Patriot will be s-canned, frankly…they never seemed to me to fit the Jeep lineup in any way.\nIt sounds like Jeep may go a bit more grass-roots, and focus more on Jeep Clubs, which would be really cool, and will most certainly build brand loyalty (read the last entry).\nI think Fiat is going to add something to this struggling company; however, will they become the savior of Jeep/ChryCo? Fiat is not the crappy company they were in the 70’s, moniker’d “Fix It Again, Tony”. I drove a Fiat last time I was in Europe, and it was a solid car with good acceleration, a great little diesel engine that got around 40mpg, and was pretty damned comfortable.\nAnyway, here’s the raw comments from the Press Release minutes…\nMichael Manley, Jeep\n- Brand loyalty for Jeep has fallen. Was #1 SUV brand in world, now #3.\n- Need to communicate with customers much more, do it consistently.\n- Will build and grow to 800,000 units by 2014.\n- Will connect with doers (who need a Jeep) and dreamers (who want the authentic equipment).\n- Will create new Jeep brand image, connect via lifestyle, deliver a clear call for action (get out and do stuff! …in a Jeep).\n- Will cover B through E segments. Each line will have “Trail Rated” model for best off road capability in its segment. Wrangler will be same as always: body-on-frame, with solid front and rear axles.\n- New = Grand Cherokee Q2 2010.\n- Compass, Patriot dropped. Liberty kept.\n- Showrooms will be redesigned for brand.\n- Will get more involved in social media.\n- Interact with customers at grass roots level, Jeep Club will be created.\nYou can read the full article here:", "label": "Yes"}
+{"text": "Credited with kick-starting Volvo’s design renaissance when it appeared with the 2016 design yr, the 2020 XC90 remains certainly one of the most stylish alternatives between luxury SUVs. It truly is driven by amongst three diverse four-cylinder powertrains, like a plug-in hybrid, and may be had in six- or seven-passenger configurations. Within, buyers will find a cabin that epitomizes Scandinavian luxury, highlighted by good resources for example nappa leather, true wooden trim, and tasteful chrome accents.\nA vertically oriented infotainment touchscreen gives controls for your vast majority in the XC90’s programs and settings, and also a driver-facing 12.3-inch display serves like a electronic gauge cluster. Just like all Volvos, the 2020 XC90 is concentrated on basic safety about it can be on luxurious, as well as a host of driver-assistance options are common across the board.\nThe XC90 gets a visual freshening for 2020 by way of a completely new grille and front bumper; Volvo also has restyled the XC90’s wheels. Base Momentum types now appear with low-profile roof rails and integrated tailpipes even though sporty R-Design designs swap matte silver exterior trim for gloss black. All XC90 styles now come conventional having a twelve.3-inch digital gauge cluster, R-Design and Inscription trims achieve entrance parking sensors as regular, and Volvo has tweaked the operation of equally the rear cross-traffic alert aspect and added active-steering support with the City Safety driver-assistance characteristic. Within, Momentum designs now can be purchased with Black Ash wooden trim, R-Design designs occur with nappa leather-based upholstery, and T8 Inscription models activity a restyled shifter produced from Orrefors crystal. Both of those the Momentum and Inscription types will now present a six-passenger layout with second-row captain’s chairs. The T8 plug-in hybrid model now arrives that has a greater 11.6-kWh battery; the ultra-loaded (and ultra-pricey) Excellence trim is not any for a longer time offered.\nbest had along with the mid-range T6 engine-a 316-hp turbo- and supercharged two.0-liter four-cylinder-and dressed in Inscription trim. With the $6500 enhance versus the mid-range R-Design, the Inscription provides a number of features that we assume luxury SUV prospective buyers may have on their quick list, such as ventilated front seats, lane-keeping assist, a Harman/Kardon audio method, and 20-inch wheels, plus a statelier exterior layout.\nEngine, Transmission, and Functionality\nThe XC90 is usually experienced in three versions, all of these riffs over the topic of Volvo’s two.0-liter turbo 4. The base model, which we have now nevertheless to test, attributes the 250-hp turbocharged T5 motor paired with front-wheel drive. The greater strong T6 variation adds supercharging on the turbocharging process to result in 316 horsepower. It truly is optional during the foundation Momentum trim and conventional in Inscription types; the motor only pairs with all-wheel push. The 400-hp plug-in hybrid XC90 T8 begins with the T6 powertrain and provides two electrical motors along with a charging port on the exterior. Our take a look at car or truck showcased Volvo’s optional air suspension, which adds Eco, Ease and comfort, Off Road, and Dynamic push modes along with independently customizable suspension settings. That suspension provided a pleasing, insulated experience, and it handled most street conditions nicely.\nYou might be forgiven should the words and phrases “three-row crossover” will not specifically spike your awareness. Acquiring this kind of a auto is commonly pushed by a necessity as an alternative to a want. However luxurious automakers have carried out an admirable task of creating these family-haulers a lot more pleasing by stuffing them with premium elements, hewing their metal into eye-pleasing designs and engineering relaxing driving activities.\nAcquire, for instance, this 2019 Volvo XC90. A considerably cry within the boxy 850 wagon you don’t forget from the youth, this Volvo delivers significant doses of premium-ness all over the place you look. Nevertheless it truly is quick to choose fault with it within a number of locations, general this XC90 ranks highly on our gotta-have-it record.\nOne particular reason we just like the XC90 a lot of is always that it can be much prettier than any of its competitors. It really is simple for the three-row crossover to show out to be a boring box, but Volvo’s designers regulate to drape sensitive sheetmetal above the XC90’s bones in a very way that attracts the eye. On this tester, the graceful Denim Blue bodywork contrasts versus chrome and brushed-metal accents. Bold lighting things, with LEDs and also the well-known “Thor’s Hammer” functioning lights, also insert suppress appeal. It is an understated and chic glance — fairly the opposite of Volvo’s smallest crossover, the brash XC40.\nThe cabin shows just as effectively as being the exterior, instead of only since this Inscription product has authentic walnut wood trim and tender, brown Nappa leather everywhere you go (even about the key fob!) and drilled-metal speaker grilles to the optional Bowers & Wilkins stereo. A high seating position and lower cowl provide excellent forward visibility, when the massive panoramic sunroof keeps things light and airy (you can, of course, occlude the sky using a driven sunshade). The control structure is considered one of simplicity: just a handful of buttons on the steering wheel along with a couple of buttons below the touchscreen around the center stack.\nThe dashboard remains uncluttered in part since almost all the car’s controls and options are stuffed into the 9-inch Sensus infotainment program. That sounds good in principle until you’re fighting to turn over the heated seats or crank up the air conditioning right after beginning the car; the touchscreen takes an age to boot up and it truly is frustrating to tap the display with no response. The same goes for tweaking common car functions, such as stop-start system or changing active-safety configurations, requiring more tapping and swiping than we’d like.\nSensus’ operation and functionality is fairly divisive even among Roadshow staff, so we’d strongly recommend playing using the technique on your examination push before committing to getting an XC90. Personally, I find the crisp, high-contrast graphics layout uncomplicated over the eyes and helpful for reading at a glance whilst driving. Moreover, I uncover the arrangement of on-screen controls straightforward and simple to understand.\nThe display defaults to a four-tile home monitor that always shows navigation, audio and phone information, with the bottom-most tile reserved for your most recently used function (e.g. fuel economy info, Apple CarPlay). Swipe right to show a dizzying array of buttons for adjusting all from the car’s choices, through the aforementioned protection methods to things such as the head-up display choices. Swipe left for tiles to switch audio sources, activate apps like Spotify internet radio or pull up menus with the equalizer, trip information or other car info. Support for Apple CarPlay and Android Auto is regular.\nProtection technology is in abundance, as is the case with all modern Volvos. The Pilot Assist mode to the adaptive cruise control, as an example, will help steer the XC90 about the highway. Other characteristics include a 360-degree camera, parking sensors, self-parking, precollision warning and brake, lane-keep help and blind-spot monitoring. One particular nice touch: Where so many cars use strident electronic beeps for these systems’ notifications, the Volvo plays pleasant musical chimes for things like parking-sensor warnings.\nJust like the outside, the XC90’s interior is very fashionable but not overly complicated.\nDriver and passenger enjoy ample space while in the Volvo XC90, likewise as plenty of space to store their sundries inside the center-console cupholders or door pockets. Likewise, the next row offers a generous amount of room for adult passengers to fit comfortably. Those seats tilt and slide forward easily to allow access to the sixth and seventh seats, however the resultant gap is a little tight. Just like a lot of rivals, the XC90’s third row is stingy on knee- and legroom. You’ll fit kids in here with no problem, but regular-sized adults will start to complain before long. At least headroom is generous and there’s a cupholder for each in the way-back chairs.\nCargo space suffers the same fate: It really is a little cramped with all 3 rows of seats up, but expands dramatically when the third row is folded down, and even additional so when the second row is folded flat. This XC90 has a power liftgate by using a kick-to-open function, but in practice, only a small percentage of kicks lead to an opening. At least you can pop the hatch with the essential fob or by just grabbing the handle.\nAnother checkmark on the XC90’s goes to its lovely driving dynamics — it perhaps doesn’t push fairly so sweetly as an Audi Q7, but it gets pretty darn close. The satisfaction begins with this tester’s T6 powertrain, which is Volvo-speak for the two.0-liter inline-four boosted by both of those a turbo and supercharger. With 316 horsepower and 295 pound-feet of torque available easily over the rev variety, you’ll never want for power.\nThe turbocharged and supercharged engine is very strong but didn’t always deliver its top fuel economy ratings.\nVolvo says you can reach 60 miles per hour in six.1 seconds, which feels believable from behind the wheel and is certainly far more than quick enough for this type of motor vehicle. Unfortunately, the motor sounds a little gruff in its operation, especially when pushed. The attendant eight-speed automatic is generally eager to downshift and performs its duties without considerably fuss.\nThe 2019 XC90 T6 has EPA mileage ratings of 19 miles per gallon city, 26 mpg highway and 22 mpg combined. I ended up averaging only 22 mpg even nevertheless I took several highway trips. The conventional stop-start function is a little rough when it relights the motor; turning it off requires swiping right about the touchscreen and locating a small virtual button.\nIt really is worth noting that you can also opt for that XC90 with its T5 powertrain, which uses a turbocharged two.0-liter rated for 250 horsepower. Provided with either front- or all-wheel generate, it returns up to 21/29 mpg in EPA testing. A far more expensive choice is the T8 plug-in hybrid, which will allow a fully charged XC90 to drive 17 miles on battery power alone.\n2019 Volvo XC90 T6 Inscription\nThe Inscription trim level benefits from high-quality details like legitimate wood and leather, plus drilled-metal speaker grilles.\nOtherwise the driving experience is most effective described as just-right. Sure, the steering is light, but its reasonably quick ratio makes dicing up the Target parking lot simple. Nevertheless not particularly thrilling, the XC90’s handling balance is perfectly competent for these challenges as cloverleaf interchanges. While using the various safety techniques providing a watchful eye, and great visibility out on the big windows, day-to-day commuting barely ruffles the XC90.\nThe sole letdown in terms from the driving experience is the journey quality. Prior XC90s I’ve tested have had air suspension, which has glided in excess of rough roads without significantly trouble. This 1 has the conventional steel-spring suspension and is a lot more of the mixed bag. Nevertheless generally pliant and well-judged, the ride becomes brittle and jarring above rough roads. The 21-inch wheels’ low-profile tires indubitably will not help. Whilst not a deal-breaker, it is really enough to make me think I’d option my personal XC90 with smaller wheels and/or air suspension.\nThat said, the Volvo XC90 is the type of car I’m happy to travel anytime, anywhere. It is effortless to live with and does a lot of things effectively; what sells it’s its all-around excellence. From design and style that won’t bore you to a driving experience that won’t frustrate you, to a practical interior along with a full complement of basic safety technology, the XC90 is the sort of crossover that’s a pleasure to live with day-in, day-out. It is one among just some exciting entrants in an normally boring segment.\nThe Volvo XC90 is a superb luxurious sport-utility, and this second-generation model launched for that 2015 design yr, is a major competitor while in the high quality crossover class thanks to high-level technology and sharp styling.\nLittle has changed to the 2018 model calendar year, except for creating Apple CarPlay and Android Auto conventional. 4 trim levels are presented: Momentum, R-Design, Inscription, and Excellence. The XC90 may be fitted with any of 3 turbocharged two.0-liter four-cylinder engines, which includes a plug-in hybrid.\nThe base T5 engine produces 250 horsepower and 258 pound-feet of torque. In T6 versions, a supercharger is included to your turbo configuration, resulting in output of 316 horsepower and 295 pound-feet.\nFrom the T8 plug-in hybrid, a 10.4-kWh lithium-ion battery pack and electric powered motors team with the T6 gasoline engine, yielding 400-horsepower total procedure output. Not just is the T8 by far the most fuel-efficient model, it’s the swiftest.\nEach motor mates having a smooth-shifting 8-speed automatic transmission. Foundation T5 variations come with standard front-wheel push. All-wheel drive is common on T6 and T8 editions, but optional for that T5.\nTwo- and three-row seating configurations are available. Rear occupants inside the T8 Excellence get individual seats separated by a long console.\nAs expected from a brand long regarded for emphasis on security, the XC90 has an impressive list of conventional advanced security characteristics. Programs include blind-spot monitoring, lively lane control, adaptive cruise control, forward collision warning with automatic emergency braking, road sign recognition, and rear collision mitigation. A rearview camera also is common.\nEach XC90 includes Pilot Support II. This semi-autonomous method can operate the automobile, steering lightly and braking, with no input with the driver beyond holding the steering wheel.\nCrash-test scores have been superlative. The National Highway Website traffic Security Administration gave the XC90 five-star ratings over-all and for the two frontal and side impact. It earned a four-star score (typical of tall crossovers) for rollover protection, which is a calculated figure.\nThe Insurance Institute for Highway Protection gave it Good ratings for side-impact crashes, likewise as both small and moderate frontal overlap incidents. Frontal crash protection was deemed Superior, if an appropriate option is installed, but headlights were rated Marginal.\nT5 Momentum ($46,900) has front-wheel push and includes a power tailgate, four-zone automatic climate control, power front seats, synthetic leather upholstery, and 18-inch wheels. A vertically-oriented 9.0-inch touchscreen includes navigation. Five- and seven-passenger cabins are presented.\nT5 AWD Momentum ($49,100) includes all-wheel travel. (Prices are MSRP and do not include destination charge.)\nT5 R-Design ($51,900) has a sportier glance, which include 20-inch wheels, a blacked-out grille, and heated entrance seats. Volvo offers five- and seven-passenger variations. T5 AWD R-Design ($54,100) substitutes all-wheel push.\nT6 AWD 7-Passenger Momentum ($54,350) arrives using the supercharged/turbo motor, normal all-wheel generate, leather-based upholstery, and three-row seating. T6 AWD 7-Passenger R-Design ($57,950) is equipped similar to T5 R-Design, but with T6 engine. T6 AWD 7-Passenger Inscription ($59,450) provides a electronic instrument cluster, wood interior surfaces, upgraded audio, Nappa leather-based upholstery, all-wheel drive, and active noise cancellation.\nT8 eAWD Plug-In Hybrid 7-Passenger Momentum ($64,950) is equipped similar to regular Momentum, with plug-in hybrid powertrain. T8 eAWD Plug-In Hybrid 7-Passenger R-Design ($68,500) is equipped similar to regular R-Design. T8 eAWD Plug-In Hybrid 7-Passenger Inscription ($70,050) is equipped similar to T6 Inscription. T8 eAWD Plug-In Hybrid Excellence ($104,900) includes an air suspension, 21-inch wheels, high quality Bowers & Wilkins audio, heated/ventilated four-passenger seating, massaging function, a beverage cooler, crystal gearshift, head-up display, and panoramic moonroof.", "label": "Yes"}
+{"text": "If this is an AW-55 transmission like the XC, that driver's side axle takes a lot to get it out.\nIn the AW-55 transmission, there is a metal cap on each spider gear. That and the spider gear shaft are in the way of trying to \"punch\" it out from the other side. The standard \"pickle fork special tool\" doesn't work well. A big cold chisel has the right angle/wedge to \"pop\" the axle.\nIf you've tried the punch from the other side, you probably messed up that metal seal. It's an odd part; keeps fluid from getting to the splines, so they run dry and rust, and it doesn't show up on the ATRA manual for the AW-55. There's an internal o-ring for the axle, which is how most cars seal the axle and splines. The transmission seal is actually running on the outside of the spider gear.\nI would simply put the passenger side axle back in, drive it, and check for leaks. If you've got a leak, replace that internal o-ring.\nAnd for the driver's side? Yeah, if there's a broken stub of the axle in the splines, it's held in by a circlip and rust. You'll need to weld on a bung/stud or drill and tap a stud into it so that you can get a slide hammer on it...\n2016 Tundra Crewmax 4WD 1794\n2005 MB S600 (90K, Michelin AS3, M1 0W40)\n2002 V70-XC (218K, AltiMax RT43, Castrol Edge 0W40)\n2002 V70-T5 (189K, IPD bars, Bilsteins, Contis, Mobil 1 0W30)\n1932 Packard Sedan (straight 8, dual sidemounts, original paint and interior, Shell Rotella 15W40)", "label": "Yes"}
+{"text": "The Lister Stirling Moss Edition: Leather Cap & Goggles Not Included\nTue, 07/25/2017 - 22:33\nDo you sometimes wake up in the middle of the night thinking, “How can I be more like Sir Stirling Moss?” Are you looking for the perfect way to outdo your precocious hipster-cum-nouveau riche pal who daily-drives a replica Porsche 550 Spyder with a Volkswagen engine? Have you got $1.3 million burning a hole in the pocket of your Italian unicorn silk trousers? Well sir, have we got a car for you. Its official title is the “Lister Jaguar Knobbly Stirling Moss.” If you’re not familiar with the Lister marque, the small but resourceful tuning house has been crafting quick Jags since the 1950s and has competed at the highest levels, including the 24-hours-of Le Mans with their Gran Tourismo special the Storm. The Knobbly is an achingly beautiful hand-crafted recreation of a vintage Jaguar racer from the famed tuning house. The original car was driven by Moss, and these recreations are said to be built to his exact specification. It only comes in Moss’ green and yellow racing livery. The Features What exactly contributes to the retro racer’s high price tag? For one thing, it features largely magnesium construction, both in the body and in the car’s running gear. Even the engine sump and differential casing are made using the lightweight metal, which is notoriously difficult to work with. Speaking of engines, the Knobbly uses a 3.8-liter Jaguar straight six, the engine that made the D-Type famous. In Lister guise, it delivers 337 horsepower and nearly 300 ft. lbs. of torque through a four-speed transmission, which means that despite its dated build sheet, the Knobbly is no slouch. Top speed? A cool 184 mph. Hope your goggles fit well. Since there aren’t any original Knobblies still running, the ten that Lister has built represent the only examples of the car in the world. Each unit is approved for FIA historic racing events, but given the exorbitant price and limited production run, don’t hold your breath looking for one at the track. It’s hard to call the Knobbly “value-oriented,” but it does bare noting that cross-shopping competition from the same year, for example a vintage Aston Martin or Bugatti racer, would yield a much higher price. There, see — you can rationalize the purchase to your significant other that way. Rumor has it that the Knobbly’s ten lucky owners will take delivery of the car from Sir Stirling himself, so even if the car won’t make you a legendary racecar driver, it might help you meet one.", "label": "Yes"}
+{"text": "2015 Jeep Cherokee SRT modified in Philadelphia\nCustom wheels, Window Tint, with a custom hood, and a viper security system.\nWe added 2-12″ Rockford T1 subs with a Rockford power 2500 watt amp, custom box , 4 10″ Hertz loud speakers with a Rockford 1000 watt amp. We added two batteries to back up this big system.\nbrought to you by Highend car stereo and performance", "label": "Yes"}
+{"text": "German car manufacturer Volkswagen has released the first set of sketches for the new Polo sedan. The vehicle is due to be introduced in the Russian market and will replace the current-generation model. The Polo sedan in Russia is essentially the rebadged Vento which is sold in India.\nBased on what can be seen, the new Polo sedan will get an updated fascia that features a new grille with chrome inserts and a set of twin-pod headlights. The sporty looking bumper gets a wide air dam along with triangular air vents on either sides. The rear section gets twin-pod wraparound taillights and bumper with integrated exhaust tips. To enhance its overall appeal, the vehicle will get dual-tone alloy wheels.\nAs for the interior, the Polo sedan will feature a new dashboard with a floating touchscreen infotainment system, three-spoke multifunction steering wheel and digital instrument cluster. Engine options are not known for now, however, it is believed that the Russian-spec Polo sedan might offer a choice of a 1.6-litre MPI and a 1.4-litre TSI engine. These engines will be mated to either a manual gearbox or a DSG.\nAs for the Indian market, the new generation Vento will be based on the MQB AO IN platform.", "label": "Yes"}
+{"text": "I bought a 280SE in the Netherlands last week and after a full service at a renowned Classic MB specialist near Amsterdam and replacement of all injectors, I drove it back home. The car was fitted with a LGP installation and the previous driver ran the car exclusively on LPG for many years. However, in my view the only proper fuel for this car is petrol, \"whatever it takes\".\nI drove it therefore on petrol and it worked fantastically well... for 400 kms, after which it started to \"cough\" in a traffic jam and stalled, not to be started on petrol again - I finished the trip on LPG. When I crank the starter even for a short while, nothing happens as if fuel was definitely not coming in the cylinders, which is probably the case\nI think (hope) it might not be the injection pump as it ran perfectly well before stalling, but I rather suspect the old fuel in the tank, and its dirt, having jammed the fuel pump and/or the filter. What would you suggest as a test to identify the source of the issue and the remedy. Or should I change all three parts, pump filer and the small fuel container after the filter ? Thanks for your advice.\nIf the car hasn't run on petrol for years, the tank and fuel system are guaranteed to be a total mess.\nBest way forward would be to flush the tank, replace the fuel pump and filter, and at least flush and blow-through all fuel lines.\nthis often happens that the petrol system got neglected becouse of only driving on LPG\nyou could do a check for how much dirt or rust there is in the tank by looking in your gastank through the hole of the fuel sender unit when you take it out , this is not much work , and the gastank also has an filter by the way\nThank you for the advice. I'll start with the fuel strainer inside the tank (i guess it is accessible from underneath the car without the need to remove the fuel tank?) and will change the damper, fuel pump and filter. The cost is reasonable for all parts will be less than €350. Cheers!\nIff i am correct you need an special tool for the fuel strainer to do that from underneath the car\nIt is a 46 mm socket it seems. I've seen since videos of dismantling the fuel pump and filter where the strainer was clearly visible fom underneath. The concern is whether there will be enough space for the soocket. I'll order the parts and will see how it goes.\nThanks all !", "label": "Yes"}
+{"text": "Fiat Chrysler recalls 58,000 older vehicles\nWashington — Fiat Chrysler Automobiles NV said Thursday it is issuing two recalls covering 60,000 vehicles for ignition and airbag issues.\nThe company said it will recall about 58,000 older cars and SUVs equipped with manual transmissions to replace clutch ignition interlock switches. The company said the wire in the switches was recalled in a previous campaign.\nThe recall covers 43,874 2006 Jeep Liberty and Wrangler SUVs and Dodge Viper cars in the United States, along with 2,944 in Canada, 706 in Mexico and 11,309 elsewhere.\n“The wire, which was temporarily substituted by a supplier for the specified material, may break. As a result, the vehicles may not start, and in rare cases — if recommended starting procedures are not followed — a vehicle may exhibit unintended movement when its ignition key is turned,” the company said. No crashes or injuries have been reported.\nFiat Chrysler didn’t say when they will launch the recall, but said until then drivers are advised to follow recommended procedures for starting their vehicles. These procedures include activating the parking brake, placing the shift lever in neutral and pressing the clutch pedal before turning the vehicle’s ignition key.\nSeparately, Fiat Chrysler is recalling about 4,000 vans in North America to remove a section of tape from their side-curtain air bags. The recall covers 2015 Ram ProMaster City cargo and passenger vans, including 2,400 in the United States.\nDuring a test to evaluate component function, engineers discovered the tape, which helps accommodate air-bag installation during vehicle assembly, may prevent the devices from deploying fully. Fiat Chrysler is unaware of any crashes or injuries. Dealers will remove the tape.", "label": "Yes"}
+{"text": "By 1baddodge on\nVehicle2004 Dodge Ram Pickup 1500 SRT-10 2dr Regular Cab Rwd SB (8.3L 10cyl 6M)\nReviewI got this truck three days ago. Put it on the highway the same day I got it drove it 630 to Texas. Babied it the whole way. Once there breakin miles completed. This truck pulls nicely. It has some fantastic torque and is so comfortable its amazing. Awesome stereo,navigational system, 500hp viper motor. It doesnt get any better than this. One of my other cars is a procharged z06 vette, and I actually like driving this truck more. I couldnt be happier and will always own a truck of this caliber as long as they keep making them.\nBest FeaturesComfort,power,navigation system, stereo, exterior looks, interior looks, hek everything\nWorst FeaturesCant think oof any, fuel economy sucks but what can you expect. Its a 500hp truck\nComments (0) Post a Comment\nYou must be signed in to post a comment.", "label": "Yes"}
+{"text": "Altair And College Of Engineering, Pune Sign MoU To Launch Centre Of Excellence On Electric Mobility\nIndustry and academia partner to foster electric mobility research and innovation.\nU.S based Altair, (Nasdaq: ALTR) a global technology company providing solutions in product development, high-performance computing, and data intelligence, has signed an MoU with College of Engineering, Pune (CoEP).\nThe MoU establishes cooperation between the entities to establish a 'CoEP – Altair Centre Of Excellence on Electric-Mobility' on the CoEP campus, which will enable more than 60 engineers to work simultaneously on electric mobility applications.\nThe CoEP will conduct formal PG-diploma courses as part of the student curriculum while Altair will act as the technology partner, providing students with simulation tools and course programming focused on electric mobility.\n“Electric mobility has always been the first choice wherever electricity has been available for long distances in trains, for short distances in trams or subways, and even within buildings in elevators and escalators. Electric mobility is, therefore, a focus area in environmental, economic and social terms. We are happy to have Altair as our industry partner to drive the need of trained technical manpower for the country in this domain,” said Dr. Bharatkumar Bhagatraj Ahuja, director of CoEP.\nThe one-year full-time PG-diploma will include courses in energy storage systems for battery management, a bridge course in electric and mechanical disciplines, vehicle dynamics and traction, sensors and controls in electric vehicles, IoT and vehicle communication followed by hands-on exposure to industrial in-plant training.\nAccording to Vishwanath Rao, Managing Director at Altair India, “We are happy to collaborate with this prestigious institution. As governments push for early adoption of electric vehicles, the automotive industry is in need of talent with knowledge and skills across multiple engineering disciplines. This Centre of Excellence on electric vehicles addresses this need and brings about cross-disciplinary knowledge clubbed with the latest in simulation technology used by global electric vehicle manufacturers.”\nAround The World", "label": "Yes"}
+{"text": "- Related Searches for\nIndonesia cruiser motorcycle:\n- custom cruiser motorcycles cruiser 250cc motorcycle 125cc cruiser chopper motorcycle cruiser chopper motorcycle sports car honda motorcycle More...\nMinimum Order: OK\nHot cruiser motorcycle Directory: Recommended cruiser motorcycle\nDo you want to show cruiser motorcy... or other products of your own company? Display your Products FREE now!", "label": "Yes"}
+{"text": "Walker Exhaust Catalytic Converter Direct-Fit Stainless Chevy GMC 4.8 5.3L EA\nDo not buy\nThe only part that is stainless steel on this is the price. Mig welded and has huge ripples from the tubing bender so will not flow smoothly and will rust out within three years. Buy the stainless flowmaster. Works, sounds and looks perfect.\nFlowmaster 2010019 Catalytic Converter - Direct Fit - 2.50 in. Inlet 3.00 in. Ou\nSounds great, runs great, looks great. All stainless steel and no creases or pipe bender kinks.", "label": "Yes"}
+{"text": "Capacity at 20Hr(Ah): 36Ah\nCold Cranking Performance (Amps) EN1: 330A\nRecommended Charge Rate (Amps): 2\nTerminal Type: T1/T3\nUp to 30,000 engine starts\nFor vehicles with standard power demands\nExtra plates for higher starting power\nRollover proof lid for extra safety\nYuasa YBX® conventional automotive batteries are:\nOriginal equipment (OE) quality, performance & specification\nFully maintenance free\nSupplied charged & ready to fit\nDesigned with enhanced safety features including integrated flame arrestor & carrying handles\nInterested in Buying?\nGet in Touch!\nGet in touch with our team to know more about the products we sell or for any product, pricing or service-related inquiry. Simply start out by filling out the form below.", "label": "Yes"}
+{"text": "Rating is available when the video has been rented.\nThis feature is not available right now. Please try again later.\nPublished on Aug 12, 2011\nOn Friday, August 12, T3 Motion, Inc. (NYSE AMEX:TTTM) a producer of clean technology electric vehicles, will visit the NYSE to announce T3 Day. Experience Square, located on the street just outside the NYSE will host the event which will feature rides on the T3, a cutting-edge 'green' personal mobility vehicle and will showcase the sleek, two-passenger R3 vehicle with its innovative design and state-of-the-art technology. Interview by NYSE Anthony Drizis\nT3 Series Features The T3 is a personal mobility vehicle specialized for use by law enforcement and security officers.\nThe T3 features include: · Cost of operation less than 10 cents per day · Zero-degree turning radius · Two rechargeable, swap-able batteries · Speeds up to 20 mph · 9-inch raised platform provides a superior vantage point · 24/7 operation\nR3 Series Features The R3 is a sophisticated plug-in consumer electric vehicle that offers a marriage of advanced technology, environmental friendliness in a stunning package that provides a unique and fun driving experience.\nThe R3 features include: · Two seater with FWD · A proprietary (patent pending) single, wide-stance, rear wheel with two high-performance tires sharing one rim · Low rolling resistance · T3 Motion's intelligent power management battery system · An in-car, integrated \"black box\" video and data recording system · Speeds up to 70 mph\nAbout T3 Motion T3 Motion, Inc. revolutionized the world of personal mobility with the introduction of their flagship electric T3 Series. Headquartered in Orange County, California, USA, T3 Motion, Inc. is dedicated to raising the bar for law enforcement and security capabilities in personal mobility technology.\nThis year, T3 Motion unveiled the R3 plug-in electric consumer vehicle prototype. The proprietary rear-wheel design of the R3 features a patent-pending, single, wide-stance wheel with two high-performance tires sharing one wheel. The revolutionary two-tire design improves traction, stability, and handling, while the low rolling resistance and rounded profile of the rear tires increase energy efficiency. The R3 will incorporate the Samsung Galaxy into the sleek dashboard design. Due to its three-wheeled design, the R3 is classified as a motorcycle.\nFor more information on T3 Motion, Inc. and the company's signature T3 Series line of electric personal mobility vehicles, and the upcoming R3 consumer vehicle, visit www.t3motion.com, email firstname.lastname@example.org or call 714-619-3600.", "label": "Yes"}
+{"text": "Car Dealership profit jumps in Brazil on e-Auctions\nJanuary-September profit from the electronic auction of used cars carried out by dealerships in Brazil was nearly three times higher than the same period last year.\nWhile e-auction revenue in the nine-month period doubled to 22bn reais (US$5.7bn) from 11bn reais, profit nearly tripled to 282mn reais from 98mn reais, according to a study carried out by vehicle remarketing firm and B2B platform provider Auto Avaliar on 2,500 dealerships and 30,000 multi-brand retailers.\nThe average transaction value was 28,700 reais per car compared to 26,000 reais last year.\n“The overall profitability of dealerships doubled with the online transfer of used vehicles, being driven by efficient management and the effective control of operations,” says Auto Avaliar CEO JR Caporal.\nBesides improving efficiency, using a B2B platform brings greater transparency when it comes to transferring cars between dealers and retailers, the executive added.", "label": "Yes"}
+{"text": "Type: 2 Door, Convertible\nEngine: 389 cubic inches (Verified)\nVIN# 262675P353065 (Verified - Matches Clear Title - No Leans)\nDrive Type: Rear Wheel Drive, Automatic\nMiles: 76,358 + what is currently being added\nRuns Great, NO current mechanical issues. (Currently being driven by owner).\nVehicle was recently inspected. No problems were found. Brakes, Joints all check out fine.\nNo leaks or defective parts were found, except for Power Steering Belt squeak.\nBelt will be replaced this week.\n08/27/15 - Both Belts were replaced with new. No more squeak....\nVehicle was repainted many years ago. Finish is very good, but wasn't disassembled for re-finish, masked around chrome. Finish is Enamel Base.\nDoes have door dings. Appears to have been there prior to re-paint.\nBody is solid. No rust. No major body work has been discovered.\nVehicle appears to have spent most of its life in doors.\nConvertible Top appears to be original and in amazingly\ngreat condition and goes up and down without a problem.\nWindshield is cracked and has wiper scratches and should be replaced.\nRear seat has an emblem missing and left rear BONNEVILLE emblem has a missing letter. I have both parts and both of these will be repaired before buyer pickup.\nThe 2012 Hagerty Price Guide Value $8,900 - $43,000\nWould not take a lot of doing, to make this vehicle close to the top end.\nWho am I\nMy name is James Miller and I own Georgia Ave Body Shop in Sheboygan, WI.\nQuestions regarding this vehicle may be issued through\nEbay or you may contact me at work (920-458-3272)\nWe acquired this vehicle in exchange for repairs on a 1948 Chevy Coop.\nI am currently driving the Bonneville to and from work.\nI fell in love with its looks, ride and memories of my past.\nI don’t really want to part with it, except my wife and I wish to move and there won’t be space for such a large vehicle. I don’t want to have to store it outdoors, especially with Wisconsin Winters. “I have more respect for it then that”\nI will measure the length of the Bonneville, so the new\nowner can make sure the garage will fit the car.\nIf the new owner wishes to have the Bonneville restored, I would consider to-do this at a considerable discount. I want to see this vehicle as it was; show room fresh.\nNeed to see what we are capable of; checked out the 1956 T-Bird we restored.\nCurrently also being sold on Ebay. eBay item number: 141750852495\nBoth vehicles are listed in my Ebay Store. http://stores.ebay.com/Jims-Keepsakes\nOwner of the T-Bird needs to sell it because she is afraid she may damage it, while driving.\nGuess I went too far…..", "label": "Yes"}
+{"text": "- Service & Repair\nJeff Schmitt Auto Group in Dayton, Ohio is proud to be an automotive leader in our community. Since opening our doors, Jeff Schmitt Auto Group has maintained our solid commitment to our customers, offering a wide selection of vehicles and ease of purchase.\nWhether you are in the market to purchase a new or pre-owned vehicle, if you need financing options, we'll help you find a car loan that works for you! Even if you have bad credit or are a first time car buyer, you can trust that Jeff Schmitt Auto Group will professionally fit you into a vehicle suited for you.\nWe look forward to doing business with you.\n138 out of 171 people recommended this dealer.\nBy writing a dealer review you can provide valuable insights to other customers.\nMy husband and I went to look at a vehicle that we had seen on line and while we were there we actually saw another car that we liked even better so we bought it. I like the idea of having a certified car that has been put through testing to provide a good used car for our transportation. Our Sales Rep, Andy, was excellent to work with and Sandy, their office manager, was so easy to work with in taking care of the financial end of the process. The best part was having our picture taken with Steve Vangorder who has made some very cute commercials for the dealership. We will definitely tell our friends about the great service that we received from Jeff Schmitt and also to the dealerships that we didn't do business with to listen and learn what it takes to make a quality teamwork atmosphere.", "label": "Yes"}
+{"text": "5 Easy Facts About car repair union nj Described\nAustin's Alignment & Brakes: Wheel Alignment, Brake Service & Mechanic\n7941 Burnet Rd, Austin, TX 78757, USA\nWhat in order to avoid You ought to prevent motor vehicle repair insurance companies that sector greatly with scare tactic advertising products.\nA fast, effortless way to get exclusive features and finance your tire and service purchases. Find out more\nThe radiator is Grand Central Station for an engine’s cooling system: The combination of antifreeze and water that cools the engine regularly passes throughout the radiator, where it discharges many of the heat it picked up in the engine and takes in cooler air before circulating once more by means of passages around the engine.\nFred and his fellas are normally ready to help, very brief and Experienced. His prices are much better than some other places. Extremely helpful and well-informed.\nBut for many people, such a insurance is just not a fantastic value. Consider the following two factors:\nEven though Newest radiators are made of aluminum and plastic and they are commonly considered rust-resistant, the metal can however corrode. Antifreeze contains rust inhibitors that stop working in excess of time, permitting corrosion to damage cooling fins inside the radiator and rust to consume via in the inside and cause leaks. Some radiators even have plastic parts that can produce visit this page cracks and leak.\nYou might be able to submit an application for vehicle repair insurance online, especially if you go through a dealer. Having said that, you ought to be mindful that you may not get quite possibly the most car repair network aggressive rates that way.\nWe provide insurance by cellular phone, online and through independent agents. Prices range determined by how you purchase.\ncar or truck are considered repair labor and these charges will not be taxable. If however, you cost a different cost to the paint for the utilised or put in aspect, the paint charge by by itself will be taxable.\nThat right there is surely an trustworthy male. If you are taking your automobile for the vendor or every other shop, they wouldn't Assume 2 times about buying that clutch and creating you shell out over $1k on parts and labor. Needless to mention, I didn't pay back $800 to own my pump replaced. I acquired almost everything accomplished for your portion of that.\nUncomplicated Q&A about signs to help you understand what can be Erroneous with your automobile. Commence with Whatever you see, hear, scent, or truly feel. You’ll be proven nearly three feasible problems triggering those indicators.\nas opposed to bid, you owe comprehensive tax on the actual cost. The tax liability is predicated upon the bid estimate Except both of the next use:\nAstounding service normally by Fred and his staff Jesus, Jeff and Roger! Both equally my husband and father solely go here only! They're car repair services pretty flexible and very honest when it comes to the work they endorse.\nCurrent review Auto Repair Garage is astounding. I've concerns about my auto seemingly dying in mid-start off. Fred diagnosed my motor vehicle and Even though very little arrived up Subsequently he tried his very best to ascertain the cause.", "label": "Yes"}
+{"text": "Classic Car Insurance Discounts\nFirstly, there are a few ways drivers can save on their insurance costs. Because it’s good to be up-to-date on the best auto insurance discounts. For instance, you can save with classic car insurance discounts such as driver, vehicle and policy discounts.\nA vintage car should be kept as safe as possible. They are special cars with unique insurance guidelines. So, you should look into classic car insurance. That way, you won’t have to stress about anything accidentally happening to your antique car while it’s in storage.\nDriver discounts are available based on a driver’s personal information. This includes driving behaviors and life choices.\nYou may also benefit from these discounts if you:\nAre a safe driver.\nAre a good student.\nCompleted a safety course.\nCommute short distances.\nDepending on the type of car will determine a vehicle discount. Classic cars are also valued higher than traditional cars. However, they are not driven as frequently. This means you will get a discounted insurance rate.\nThese are available based on specific policy choices.\nYou may benefit from these discounts if you:\nHave a multi-vehicle policy.\nPay the policy in full to avoid finance charges.\nBundle at least two services.\nHave a qualifying homeowner’s insurance policy.\nHave at least six months of continuous coverage.\nClassic car insurance can help cover your classic and collector cars. We want to help you keep your classic vehicle, or collection, safe. So, even if your classic car is safely kept away, this type of insurance coverage may still be useful.\nDo you need more information about classic car insurance discounts for young drivers, or total loss? Our agents and customer service representatives are here to help with your home and auto insurance company needs. Call us today at 888-949-6289 or visit your nearest Insurance Navy location. For your convenience, Insurance Navy is open from 8 a.m. to 9 p.m. CST, 7 days a week.\nWe also have a strong presence on social media. So, like or follow us on Twitter, Facebook, Instagram, Pinterest, or YouTube. After that, we can keep you updated on helpful safety feature tips, defensive driving courses, local news and much more.\nAdditionally, we can help you find an insurance quote right on our website. Because we want to help you save money wherever possible, we offer our insurance quotes completely free of charge.\nBy navigating our website, you can also inform yourself with many useful topics, such as which situations allow your policy to pay for physical damage to your vehicle, underinsured boater coverage, and why an insurance company has labeled your vehicle a total loss.\nLastly, we also have blogs that may help you with any questions you have. For instance, our blogs cover many different topics. From Lyft’s customer loyalty program to anti-theft devices included in Porsche Classics.\n*Please review your own policy carefully for discounts available. Discounts vary by the insurance provider.", "label": "Yes"}
+{"text": "[JTC-6887] JLR CRANKSHAFT REAR OIL SEAL INSTALLER\n- The JLR crankshaft rear oil seal installer is specially designed to install the crankshaft rear oil seal on JLR vehicles.\n- Application: Land Rover Freelander 2, Evogue with 2.2L diesel engine.\n- LM number: 303-1271.\nThere are no reviews yet.", "label": "Yes"}
+{"text": "As automakers roll out waves of new electric vehicle (EV) models, and improved battery technologies begin to vanquish “range anxiety” among prospective EV drivers, adequate public charging infrastructure will be a necessity.\nIn 2021, 6.6 million EVs were sold in the U.S., more than double the number from 2020 and more than triple the amount from 2019, according to the International Energy Agency. This rate is projected to grow 25% annually over the next five years.\nMinnesota had 23,897 EVs at the end of 2021, according to the Minnesota Pollution Control Agency. This is a 241% increase from 2018 when there were 7,000 EVs in the state. Additionally, the number of EVs is expected to grow to 91,000 by 2030, according to Metropolitan Council.\nThis growth in EV sales has led to an increased need for electric vehicle charging stations, which can now be found in many locations, including mixed-use developments, workplaces and multifamily dwellings. Minnesota currently has 2,013 public charging points.\nDakota Electric is noticing an upward trend in EV charger installations from businesses in our service area looking to add value to their property and gain an edge over their competition.\nTypes of EV charging stations\nThere are four types of EV charging stations — AC Level 1, which takes 16-40 hours for a full charge, AC Level 2, 3-10 hours and DC Fast Charger, 30 minutes for an 80% charge.\nDC charging stations are most likely to be found along transportation corridors, such as at rest stations or truck stops. Currently, the most common charging station for commercial properties are AC Level 2 chargers. In multifamily communities, AC Level 2 chargers allow residents to get a full charge overnight, similar to at-home charging.\nFind EV charging stations with PlugShare\nPlugShare is a free EV driver’s app for iOS, Android and web, allowing users to find charging stations, leave reviews and connect with other plug-in vehicle owners. It has the most accurate and complete public charging map worldwide, with stations from every major network in North America, Europe and throughout much of the globe.\nPlugShare is also home to the largest community of EV drivers in the world. Every day, drivers add more station locations, constantly making the app more comprehensive, powerful and accurate. From within the app, users check-in when they charge and share tips, comments and photos of their charging experiences.", "label": "Yes"}
+{"text": "NASHVILLE, Tenn., Jan. 4, 2022 /PRNewswire/ — Underscoring its commitment to accelerating growth and innovation, leading global tire maker Hankook Tire today announces executive promotions at its North America headquarters in Nashville, Tenn. Curtis Brison has been named president of Hankook Tire North America (formerly Hankook Tire America). He succeeds Sooil Lee, who remains CEO of Hankook Tire & Technology. Additionally, Robert Williams has been promoted to senior vice president of Truck, Bus and Radial (TBR) sales. Jong Jin (JJ) Park has been promoted to vice president of marketing.\n“The North American market is critical to our global business strategy, and Curtis, JJ and Rob have been instrumental to accelerating our growth,” said Sooil Lee, president and CEO, Hankook Tire & Technology. “Curtis has proven his strength as a sales leader with a strong commitment to customer success. Rob has demonstrated success throughout the TBR sector. JJ has driven marketing strategies that have had a positive impact throughout the region. All are integral members of the team, who will be essential to navigating the years ahead for Hankook throughout North America.”\nBrison assumes the role of president of Hankook Tire North America, overseeing the U.S. and Canada regions. He will lead four departments and direct teams including the Tennessee Plant. He also will continue to oversee the U.S. Passenger Car and Light Truck (PCLT) department, where he has served as vice president since joining Hankook in 2020. With 15 years of experience in the tire and automotive sectors, Brison has been instrumental in driving new product introductions and segment expansions in the U.S., including the All-Weather Kinergy 4S2 and Dynapro XT and Dynapro AT2 Xtreme.\n“Hankook continues to bring the right combination of performance, innovation and quality to the development of our passenger and commercial tire portfolios,” said Brison. “I am honored to work with our teams across North America to further drive innovation and success for Hankook and our customers throughout the tire industry.”\nWilliams oversees all TBR tire sales at Hankook, including replacement and OE sales, and will continue to lead the TBR sales team and regional offices as senior vice president. He joined Hankook as senior director of TBR sales in 2019, bringing with him more than three decades of tire industry experience. Williams has a proven track record of success in sales and operations leadership, strategic planning and optimizing profitability.\nPark will oversee five teams as vice president of marketing: marketing strategy team, TBR marketing team, technical service team, America Regional Distribution Centers (RDC), operation team, and Canada sales subsidiary. He has served as the marketing director and U.S. sales innovation director for Hankook Tire America and will continue to serve as marketing director in his new role. Park joined Hankook Tire in 2005 and has experience across the American and United Kingdom regions. Bartek Choi, who has been working for Hankook in Nashville, Tenn. for two years, will assume Park’s former role as U.S. sales innovation director.\nIn addition, Yong Sup (Peter) Jung who served as COO for Hankook Tire America for the past two years, has relocated to Hankook’s Asia-Pacific division with a focus on expanding brand recognition and market growth. He will be based in Jakarta, Indonesia.\nSource: Hankook Tire", "label": "Yes"}
+{"text": "New 2018 Jeep, Chrysler, Dodge & Ram Vehicles for Sale Near Athens, Tyler, Corsicana & East Texas\nWelcome to Elder Chrysler Dodge Jeep RAM! We know that we’ve got a 2017 or 2018 Chrysler, Jeep, Dodge, and Ram vehicle that’s perfect for you in the East Texas area. Simply check out our new vehicle inventory, and visit our dealership for a test drive now! Our experts are here to find your perfect match. Whether it’s a family-friendly 2018 Chrysler Pacifica, impressive and muscular 2018 Dodge Charger, rugged 2018 Jeep Cherokee, or the efficient 2018 Ram 1500, we’ve got it all!\nCertified Pre-Owned Standards and Benefits\nArriving in style isn’t just an option. It’s a necessity. And substance? We’ve got plenty. Every Chrysler, Jeep®, Dodge, and RAM Certified Pre-Owned Vehicle (CPOV) has to pass our stringent certification process guaranteeing that only the finest vehicles get certified.\nDriving one of our Certified Pre-Owned Vehicles means you’re well taken care of, on the road and off.\nNever settle for anything less when it comes to getting the car you want. Elder Chrysler Dodge Jeep Ram stocks a huge number of high quality new 2017 and 2018 models and trims for sale from commercial work powerhouse Ram Trucks to sleek and nimble Dodge Challenger coupes.\nOur dealership proudly serves Athens, TX and surrounding cities, including Frankston, Brownsboro, Tyler, Palestine, and Chandler. Check out our newest specials for a great deal on a new Chrysler, Dodge, Ram, or Jeep. Browse our new vehicle inventory for an even greater selection of vehicles, and if you’re on a smaller budget, check out our quality used vehicle inventory today! Between our huge selection of new and used inventory, friendly and knowledgeable dealer staff, and competitive everyday low prices, you are bound to find what you are looking for at Elder Chrysler Dodge Jeep Ram. Don’t see what you want? Use our CarFinder tool, or contact our expert staff by calling us at 903-292-0419 and we’ll get you to the car, truck, or SUV of your dreams!\n* The advertised price does not include sales tax, vehicle registration fees, other fees required by law, finance charges and any documentation charges.\n* Images, prices, and options shown, including vehicle color, trim, options, pricing and other specifications are subject to availability, incentive offerings, current pricing and credit worthiness.\nElder Chrysler Dodge Jeep Ram\n1798 East Highway 31, Athens, TX 75751Get Directions\nCall us today!\nSales Department HoursMonday: 8:30am-6:00pmTuesday: 8:30am-6:00pmWednesday: 8:30am-6:00pmThursday: 8:30am-6:00pmFriday: 8:30am-6:00pmSaturday: 9:00am-5:00pmSunday: Closed\n©2018. Elder Chrysler Dodge Jeep Ram. All Rights Reserved.\nAbout The Dealership\nSave your favorite vehicles for later viewing on your desktop or mobile devices.\nKeep track of all the vehicles you've viewed for a better car shopping experience.\nNarrow your search by comparing your favorite vehicles.\nBy submitting your contact information, you consent to be contacted by telephone about purchasing a vehicle or obtaining vehicle financing. Clicking on the Submit button above is your electronic signature.", "label": "Yes"}
+{"text": "The Mossy Oak package will return to Ram lineup, and the truck builder will display it at the 2014 Detroit Auto Show with the special edition 1500 Mossy Oak. After being originally introduced in 2011, the new\nRam 1500 Mossy Oak Edition will go on sale in early 2014 at a base price of $39,985, plus $1,195 destination charge. The model will be displayed next week at the 2014 Detroit Auto Show.\nThis Mossy Oak model is available exclusively on the Ram 1500 4x4 Crew Cab model, and for the first time ever, it will be offered with the RamBox cargo management system.\nThe Mossy Oak model is available in either Black, Black Gold Pearl or Prairie Pearl monotone exterior colors combined with camouflage on the bedcaps and tailgate, and Mossy Oak logos prominently displayed on the rear quarter panels. Buyers can also opt for camouflage decals on the lower cladding too. This combination of paint and camouflage will make it idea for hunting, fishing, camping or any other outside activity that truck owners partake in.\nClick past the jump to read more about the 2014 Ram 1500 Mossy Oak Edition.\nRam 1500 Mossy Oak Edition in Detail\nOn the inside, Ram opted for Canyon Brown or Frost Beige colors combined with Mossy Oak camouflage on the dashboard and door panel trimmings.\nAlong with the camo work, there is a Mossy Oak logo embroidered on the four primary headrests and optional Espresso Tuscany-colored Katzkin leather seats with Mossy Oak seatback embroidery.\nGallery Ram 1500 Mossy Oak Edition\nAfter a brief, one-year hiatus, the Ram 1500 Mossy Oak® Edition is returning to the truck brand’s model lineup.\nUpdated for 2014, the Mossy Oak Edition will now be available for the first time with the RamBox cargo management system, in both 6-ft.-4-in. and 5-ft.-7-in. bed lengths.\nOriginally introduced to the Ram Truck family in 2011, the Mossy Oak Edition is designed for enthusiasts who are passionate about the great outdoors.\nThe 2014 Ram 1500 Mossy Oak Edition further extends the multi-tiered relationship between the Ram Truck brand and America’s top camouflage brand.\n\"Ram Truck is focused on the needs and wants of truck buyers,\" said Reid Bigland, President and CEO, Ram Truck Brand – Chrysler Group LLC. \"Our Ram Truck owners are passionate about hunting and fishing. The Ram Mossy Oak Edition gives hunting enthusiasts a way to proudly proclaim their love for the outdoors.\"\nRam 1500 owner demographics illustrate a love for the outdoors: 30 percent hunt, 44 percent fish, 27 percent are boaters and 42 percent are campers.\n\"The Ram Truck brand has been a great partner to Mossy Oak,\" said Ronnie \"Cuz\" Strickland, Executive Vice President of Mossy Oak. \"The people there love trucks, but they’re also into hunting and fishing and understand that their customers are, too. To have Ram take that relationship to the next level by offering a special Mossy Oak Edition speaks volumes about their commitment to hunters and Outdoorsmen and women, and we are extremely proud to partner with them.\"\nThe Ram 1500 Mossy Oak Edition’s bedcaps and tailgate are covered in Mossy Oak Break-Up Infinity® camouflage pattern, and the Mossy Oak logo is prominently displayed on the rear quarter panels. Break-Up Infinity-patterned lower cladding is also available.\nInside, the center column of the Ram’s instrument panel is finished in Mossy Oak Break-Up Infinity, as are the door panel inserts. The Mossy Oak logo is embroidered on the four primary headrests. Buyers also can opt for Espresso Tuscany-colored Katzkin leather seats with Mossy Oak seatback embroidery.\nThe Ram Mossy Oak Edition is available exclusively as a Ram 1500 4x4 Crew Cab model, and is based on the popular Ram Outdoorsman.\nRam 1500 Mossy Oak Edition available colors include Black, Black Gold Pearl and Prairie Pearl monotone exterior, paired with Canyon Brown and Frost Beige interior.\nRam Mossy Oak Edition trucks will arrive in dealerships in early 2014. Ram Mossy Oak Edition pricing starts at $39,985, plus $1,195 destination charge.", "label": "Yes"}
+{"text": "Paintless dent repair, also known as dent removal, is a great way to fix dents on your car. This technique can be used on a variety of metal panels, including steel and aluminum. The process can be done without removing the original paint, so you can have your car back on the road in no time. Read on to learn how it works and how you can use it to repair minor dents.\nSmall dents on your vehicle are caused by collisions. As a result, vehicles bump into each other and dent each other. The paint on the other vehicle will rub off onto your car and cause a dent on yours. Luckily, paintless dent repair can fix these minor dents and leave your car looking great. And because it doesn’t require the use of paint, you can perform the repair yourself whenever you want.\nDent repair techniques are most effective on body panels. They can be done on any type of vehicle, from vintage cars to modern sports cars. The process can be performed on any make or model, and can restore the paint of your car. And because they do not involve painting, you can expect your vehicle to look as good as new again. You can even call a dent repair service to fix your dent, if you don’t feel comfortable with it yourself.", "label": "Yes"}
+{"text": "Sales of alternative powertrain vehicles in South Korean grow 31%\nSales of alternative powertrain vehicles in South Korea during the first half of 2018 grew 31.2% year on year (y/y) to 53,778 units, reports Yonhap News Agency citing industry data. The figure includes hybrid and battery electric vehicles (BEVs), which accounted for 7% of the total sales of cars in South Korea. The highest-selling vehicle during the period was the Hyundai Grandeur Hybrid with sales of 12,029 units.\nSignificance: South Korea has recorded a substantial growth in sales of electrified vehicles over the past few years. According to the news report, South Korea sold 97,813 alternative fuel cars in 2017, compared with just 28,807 units in 2013. The contribution of environmentally friendly cars to overall car sales in the country has increased from 2.2% in 2013 to 6.4% last year. The growth came on the back of positive demand for new models as well as favourable policies by the country's government. The government has committed to spend KRW150 billion (USD133.7 million) in assisting the research and development of alternative-powertrain vehicles during 2016-20. It aims to have about 820,000 hybrids, 200,000 EVs, 50,000 plug-in hybrid electric vehicles (PHEVs), and 9,000 fuel-cell electric vehicles (FCEVs) on the country's roads by 2020. The government has been putting in place policies to increase the adoption of alternative-powertrain vehicles through subsidy programmes and infrastructure initiatives. According to our light-vehicle powertrain forecasts, production of alternative-powertrain vehicles, including FCEVs, in South Korea will grow to 341,902 units in 2018, up from an estimated 245,105 units in 2017.\n- Average age of US light trucks and cars approaches 12 years\n- Fuel for Thought: The COVID Recovery\n- Global Auto Demand Tracker - new sales/registration numbers for June 2020\n- Automotive Rapid Response Report | 8 July 2020\n- Automotive COVID-19 Recovery Series\n- Automotive Rapid Response Report - 17 June 2020\n- COVID-19's real possible effects on the Auto and Mobility Industry\n- With 50% of countries reporting, month of May numbers indicate a solid rebound for global auto demand\nAn Automotive Minute [S2|E28] With 2.5 months of lost output and revenue, Michael Robinet discusses North America a… https://t.co/gR7QlivyaL\nDownload the joint IHS Markit – CAR whitepaper: ‘Supplier Strategy Reset’ that we discussed early today at CAR MBS… https://t.co/B9NG48Tnsc", "label": "Yes"}
+{"text": "This Gorgeous Aston Martin Vanquish for sale from San Francisco Sports Cars is finished in Silver with natural colored hides. Boasting 450HP the Vanquish was Aston Martin's range topping vehicle upon its introduction. The hand built V12 motor is mated to a 6-speed paddle shift gearbox and offers gripping acceleration. A Grand Tourer in the traditional sense the vanquish has a full sized boot (trunk) with plenty of room for luggage. Inside the cockpit you'll find hand fitted leather, a diamond quilted Alcantara headliner, and the finest of trim materials on all surfaces. Having traveled only 10,310 miles she shows as new.\nEquipped as follows:\nThis super car comes with full set of owners books and is turn key ready for your enjoyment. Asking a very correct $89,995 ono Trade-ins gladly considered. Leasing and finance options are available.\nTake a look at the detailed photo galleries where you will find an additional 100 pictures as well as video following the initial 51 photo slide show.\nIf you have an exotic sports car or an entire collection to consign and are anywhere in California, please consider San Francisco Sports Cars\nCLICK A PHOTO GALLERY BELOW!", "label": "Yes"}
+{"text": "8. HOW TO INCEPTION - HOW TO: Oil level check:\nNote I: Make sure the oil warning light goes out quickly after you start your engine! (because I've filled the filter with oil it only took a second or two to go out).\nNote II: To measure the oil level your bike needs to be upright and level. As you can see I've used a rear stand and some wood to get my bike sitting upright and level.\nNote III: Let your engine idle the entire time, DON'T rev it (let it circulate on its own because if there's no oil in places where it is needed...).\n8.1 Start the engine and let it run idle for approximately 5 minutes:\nWhile the bike is idling and warming up check for oil leaks around the drain plug and oil filter.\nNow if the filter is leaking tighten it some more and if the drain plug is leaking check the torque, if its to the correct torque and still leaking you unfortunately need to replace the crush washer.\n8.2 Stop the engine and let the oil sink down for 10 minutes:\nIf you don't wait, the oil doesn't have a chance to return to it resting state. And as a result the dipstick reading will read low.\n8.3 After 10 minutes unscrew dipstick.\nThis is the location of the dipstick.\n8.4 Clean the entire dipstick of oil.\nOil has dripped down onto the dipstick, we can't read the oil level this way.\nNice and clean!\n8.5 Screw the clean dipstick back in fully!\n8.6 Unscrew the dipstick again.\n8.7 Check the oil level:\nIf it's below the upper line then you can add a small amount of oil to get to the upper level. If it's above the upper line then you need to remove some oil.\nWith 2,6 liters its exactly on the low of the old dipstick, now add some more oil!\nThanks to this its an very easy task to see what you're doing.\nAdd in small amounts of around 100 (0.1) to 200 ml (0.2 quart) at a time.\n8.8. After adding (or removing) some oil, massure again: If the dipstick still isn't showing 'full' repeat the how to, and add a small amount of oil each time. If its overfilled remove oil until its on the 'full' mark.\nYou don't need to start en stop the engine every time you recheck (step 8.1 & 8.2). Instead I've run it every even time I added oil for a minute or two. Now if the dipstick is showing full then continue to the next step!\nTake your time and add small amounts, you don't want to overfill.\nNow as you can see I've \"overfilled\" it by a hair. But since I've got the old dipstick I still need to add more oil to get to the same 'full' mark as the new style dipstick so no worries, this was just for illustrations :)\n9. Congratulations, you're done!\nThe new engine oil is in and if it's applicable to you, then you only need to put the fairing or belly pan back on.\nI hope you found it useful and as always: any comments or suggestions are welcome! I plan to do an coolant change when the weather get better, if you need anything documented let me know.", "label": "Yes"}
+{"text": "Turntable caged truck mesh sides\nLarge turntable truck with high meshed sides\nand ends, with half hinged\nside. This mesh sided large volume hand\nhas been designed to handle heavy duty industrial\nuse. These hand trucks can\nof parking brake, towing\nand rear coupling. The steel wheels fitted to this meshed hand\nsteel roller bearings with grease nipples fitted, and deep tread block\ntyres. Turntable hand drawn trucks, made for council,\nor factory. Made in England.\n||Large heavy duty tyres\nheavy duty design.", "label": "Yes"}
+{"text": "Dewhel Fuel Pump Mounting Bracket for BOSCH 044 Black\nAre you in need of a sturdy and reliable fuel pump mounting bracket for your BOSCH 044 Black? Look no further! Dewhel offers the perfect solution with their fuel pump mount that guarantees a secure and stable installation.\nWhy Choose Dewhel Fuel Pump Mounting Bracket?\nWhen it comes to installing a fuel pump, it is crucial to have a mounting bracket that can withstand the demands of the job. Dewhel’s fuel pump mount is specifically designed for the BOSCH 044 Black, ensuring a perfect fit and maximum performance.\nSecure and Stable Installation\nThe Dewhel fuel pump mount features a robust clamp cradle that securely holds the BOSCH 044 Black in place. This eliminates any worries of the pump coming loose or shifting during operation, providing peace of mind and optimal fuel delivery.\nMade from high-quality materials, the Dewhel fuel pump mount is built to last. It can withstand the rigors of daily use and is resistant to corrosion, ensuring long-lasting performance and reliability.\nInstalling the Dewhel fuel pump mount is a breeze. With its user-friendly design, you can quickly and effortlessly attach the bracket to your vehicle’s frame or chassis. No complicated tools or extensive modifications are required.\nFrequently Asked Questions\n1. Is the Dewhel fuel pump mount compatible with other fuel pump models?\nNo, the Dewhel fuel pump mount is specifically designed for the BOSCH 044 Black. It may not fit other fuel pump models properly.\n2. Can the Dewhel fuel pump mount be used for both street and racing applications?\nYes, the Dewhel fuel pump mount is suitable for both street and racing applications. Its sturdy construction ensures reliable performance in any setting.\n3. Does the Dewhel fuel pump mount come with a warranty?\nYes, Dewhel offers a warranty on their fuel pump mount. Please refer to the product packaging or contact their customer service for more information.\nWhen it comes to installing a fuel pump, the Dewhel fuel pump mounting bracket for BOSCH 044 Black is the perfect choice. Its secure and stable installation, durable construction, and easy installation make it a reliable solution for any vehicle. Don’t compromise on the quality of your fuel pump mount – choose Dewhel for a hassle-free and long-lasting installation.", "label": "Yes"}
+{"text": "Most gas-electric hybrid cars qualified for federal income tax credits for a few years, but as 2010 ran down, so did the credits. Starting in 2011, only the hybrids that use plug-in electrical outlets to charge their batteries will get credits.\nThe Energy Policy Act of 2005 made tax credits available for lessees or buyers of new gas-electric hybrid vehicles for the first time. (Tax credits reduce the amount of tax owed, while deductions lower your taxable income.)\nThe tax credits for hybrid cars took effect in January 2006. The maximum credit for most hybrids was $3,400. The idea was to encourage people to buy energy-efficient hybrids even though they were more expensive than comparable gas-only vehicles. The credits phased out after a manufacturer sold 60,000 of a hybrid model. All credits end with purchases made by the end of 2010.\nHere's how it works. Let's say 60,000 of a hybrid model had been sold by June 30, 2006. Anyone buying one of those hybrids through the next calendar quarter -- ending September 30 -- got the full tax credit. People buying that hybrid in the next two quarters, through March 31, 2007, got half the credit. In the next two quarters after that, a buyer got 25 percent of the credit. After that, the credit was gone.\nToyota hybrids phased out in 2007, and Honda hybrid credits expired early in 2009. Ford reached phase-out early in 2010. As the Dec. 31, 2010, end for all credits neared, only a few hybrids still qualified for the credits. Partial credits were available for some hybrids sold by BMW, Cadillac, Chevrolet, GMC, Mercedes Benz and Nissan. A list is available on the Internal Revenue Service (IRS) Web site [source: IRS].\nAs 2010 comes to a close, the buzz on tax credits seems to revolve around plug-in hybrids and electric cars, with little chance that credits for gas-electric hybrids would be renewed. The Federal Recovery and Reinvestment Act of 2009 provided stimulus money designed to give plug-in and electric car buyers between $2,500 and $7,500 in federal income tax credits. The larger the battery, the higher the credit. Buyers can get a $2,000 credit for exchanging a hybrid for a plug-in. And many states and municipalities offer incentives such as tax credits, reduced license fees, free parking and rebates for plug-ins and electric cars.\nSome analysts question whether credits for gas-electric hybrids are ending too soon [source: Berman]. Consumers don't consider these hybrids so experimental anymore, and the prices have come down as a result. Until plug-ins and electric cars become more familiar and affordable, analysts suggest that continued credits might encourage more people to buy gas-electric and help cut America's dependence on the imported oil that is used to make gasoline.", "label": "Yes"}
+{"text": "When it comes to luxury SUV’s & Crossovers Lincoln’s 2019 lineup doesn’t disappoint. Following Lincoln’s own niche within the American Luxury SUV market they provide drivers with a smooth ride and spacious interiors filled with luxury details such as smooth leathers, rich woods and soft suedes.\nLincoln went through a rebirth starting in 2014 with the Matthew McConaughey commercials grabbing lots of new attention both from the commercials and subsequent parodies that followed.\nLet’s take a look at what Lincoln has in its 2019 SUV & Crossover lineup.\nThe Lincoln Navigator\nThe 2019 Lincoln Navigator is the largest SUV in the Lincoln lineup and pricing starts at $73,205. It has spacious seating for 7 and the luxury interior you expect from a Lincoln. It is powered by a Twin-Turbocharged 3.5L Engine that is capable of producing 450 horsepower and 510 lb.-ft of torque.\nIf that doesn’t get you excited it comes with six selectable drive modes to let you fit the Navigators performance to how you want to drive from converse to excite and other modes to fit specific driving conditions such as slippery surfaces or steep climbs. This is done through its adaptive suspension, that controls the way wheels move up and down over different surfaces and road conditions, its shift points, and whether it is in 4x4 for 4x2 mode.\nWhen it comes to towing the Lincoln Navigators Twin Turbocharged Engine is able to tow up to 8600 lbs. The Heavy-Duty Trailer Tow Package includes traction assist to help with moving heavy loads in many driving conditions. The Pro Trailer Backup Assist feature allows you to use a simple knob to effortlessly backup your trailer and assist you getting your trailer where it needs to be the first time.\nThere is plenty to consider with the 2019 Lincoln Navigator but if you are in the market for Luxury SUV that is comfortable to drive, has plenty of power and towing capabilities, this SUV is worth serious consideration.\nThe Lincoln Nautilus\nThe 2019 Lincoln Nautilus is a luxury crossover available starting at $40,340. It has a spacious and comfortable interior with seating for 5. The 2019 Nautilus is powered by a Twin-Turbocharged 2.7L V6 Engine that delivers 335 horsepower and 380 lb.-ft of torque.\nThe Nautilus comes with many advanced driving features such as adaptive steering that automatically adjusts the firmness of the steering wheel to create smooth and precise steering that makes the driver feel better connected to road at both high a low speeds. The Nautilus also comes with Adaptive Cruise Control, Stop and Go, and Lane Centering technology. Adaptive cruise control uses camera and radar inputs to automatically adjust your speed when in traffic. Stop and Go is another new feature that allows the vehicle to come to a complete stop restart when traffic begins to move. Finally, Lane Centering provides steering support to help keep the vehicle centered in the driving lane and help avoid any unwanted or accidently drifts into other lanes.\nThe Lincoln Nautilus comes with intelligent AWD that uses sensors to monitor traction and deliver torque to the front or rear wheels to enhance handling and significantly reduce wheelslip.\nThe 2020 Lincoln Aviator\nThe Lincoln Aviator makes its triumphant return with its 7 seater, 2020 edition. Pricing on the new Aviator starts at $51,100 for the standard model and over $90,000 for a fully loaded Black Label model. The all new 2020 Lincoln Aviator is packed full of high-tech features and powerful 3.0L Twin-Turbocharged V6 Engine. The twin turbo engine produces 400 horsepower and 400 lb.-ft of torque.\nThe 2020 Aviator gives us a preview of what we believe Lincoln’s niche will be over the next few years where Lincoln focuses on solely on powerful and spacious Luxury SUV’s. Providing drivers with the latest technology in spacious, comfortable SUV.\nThe Aviator is Lincoln’s most recent attempt at a Luxury Mid-Sized SUV based off the Ford Explorer and incorporates some of the latest technology including smartphone integration with the Lincoln Way App. Other standard features on the Lincoln Aviator include Co-Pilot360 that is a full suite of driver-assist features, 4G LTE Wi-Fi hotspot capability, 14-speaker Revel Audio System, and much more.\nIf you haven’t checked out a Lincoln Mid-Sized Luxury SUV in a few years the 2020 Aviator is definitely worth checking out. The standard model is anything but base and for those who want everything the Black Label model has it all.", "label": "Yes"}
+{"text": "There are various factors that can come into play for lowering fuel consumption. The major manufacturers of heavy vehicles are well aware of this have fitted their trucks with new savings-oriented packages and measures\nThe continual increase in the price of diesel threatens to ruin Italian road transport. It’s a problem that can no longer be avoided from a political point of view. But to solve or, at least, alleviate the problem, there are some technical measures that can be adopted. How? First and foremost, it would be enough to “copy” those manufacturers that have created packages for tractor trailers that considerable reduce consumption. Take, for example, the Iveco Ecostralis, the Man Tgx Efficient Line, the Renault Premium and Magnum Optifuel, and even the economical version of the new Mercedes-Benz Actros, the recent winner of Truck of the Year 2012. Primarily, they have lowered the limiter’s maximum speed from 90 to 85 km/h. On Italy’s congested roads – and also on some European arteries – only 38 fewer km are travelled in a day, as a recent survey by Man confirmed. But the saving in fuel is considerable: 19 litres less, as certified by the German company itself. What makes the difference isn’t only less demand on the engine, it’s also the aerodynamics. When travelling at 89 km/h instead of 85, aerodynamic resistance increases by 10%.\nBut economical trucks can also inspire a different style of driving. The Euro Tronic automatic transmission on the Iveco Ecostralis, for example, has software that will not allow the gears to be changed above 1,500 revs thereby preventing driver kick-down (induced gear change by pushing the accelerator to the floor). A strategy that more prudent drivers could also use with manual transmissions or automatic transmissions without this software.\nThen there’s the choice of vehicle: economical trucks opt for downsizing, with engines of 420 to 480 HP (only the Ecostralis is a 500 HP). As well as lowering consumption, they also reduce the weight on the entire kinematic chain.\nThe kind of tyres is also fundamental. In this case, the key parameter is low rolling resistance. Pressure is also very important for reducing fuel consumption so it must be checked regularly. Lending a helping hand in this case is the pressure monitoring system that is mounted in a variety of low-consumption trucks on the market.\nThe lubricant also affects consumption thanks to a range of products that will reduce friction. Without deviating from the instructions in the use and maintenance manual, choosing a lubricant with a lower viscosity would be more useful. We have already seen a decrease of 10W-40, 15W-40 and 20W-50, an increase of 5W-30 and 5W-40, and an increasingly marked growth of the 0W-30 and 0W-40. With better synthetic and non-mineral bases.\nNot even axles can escape the anti-crisis “commandments”. Tractor trailer and semi-trailer axles that are not aligned can increase diesel consumption by 2%, even if the difference is only one degree.\nLastly, the semi-trailer. The basic principle is maximum aerodynamic continuity with the tractor trailer, which can be achieved by correctly adjusting the top spoiler and the side profiles. If a curtain side is used, canvas tautness must be checked. And also ensure that the load is well distributed.\nBut when all is said and done, it’s the driver who makes the fundamental difference: this is why for many years manufacturers have offered courses on economical driving that will further improve the performance of their fleets.", "label": "Yes"}
+{"text": "Mazda's Carbon Editions are always special, and this one is no different, though it mainly adds cosmetic bits. The exterior looks sublime in gray with the model-specific 18-inch alloy wheels. On the practical side, it gains heated side mirrors, while the addition of a power moonroof adds some natural light to the cabin. The best Carbon Edition feature is probably the red leather interior, though. It may be too flashy for some, but it does add a sporty element and some color to a cabin that could otherwise be a bit too dark.", "label": "Yes"}
+{"text": "Welcome to Albion Golf Cars, a division of C.J.McDonald Company Ltd.. Established in 1973, Albion Golf Cars is proud to be an independent vehicle\ndealer offering new and used sales, custom outfitting, premium fleet and special event rental, parts and service solutions. Our team works with the leading manufacturers of golf, utility and transportation vehicles: E-Z-GO, Cushman, AGT Electric, Club Car, Carryall and Yamaha. Contact us for \" Vehicle Solutions For All Occasions\".", "label": "Yes"}
+{"text": "THE NEW ORIGINAL\n1,5-litre VVTi petrol engine\nMost affordable SUV in SA\nTerms and Conditions apply\nValid till 30 September\n*Terms and Conditions apply to all specials.\nYour message has been submitted successfully\nYour details have been submitted to the . You can contact the on the following number:\nYou have already contacted the for this vehicle.", "label": "Yes"}
+{"text": "Click on the pictures to enlarge\nHere you see the pictures of parts of my basket case twin that is up for sale. Due to too many projects I will part with my Rapide project.\nIts mainly everything there you need for a twin apart from a gearbox plus gearbox cover, the kickstarter and gearselector parts and other things you cannot find in the pictures.\nThese are according to Bob Dunn excellent cases. The crank was rebuilt with new big end and mainshafts by Maughan’s couple of years ago. The UFM is genuine Vincent with no number on it. I carefully inspected it, but I simply cannot find a number. It was obviously a replacement headstock or complete UFM from the works. The engine is from the transition period, hence the cases are Vincent embossed, but the cover has the HRD polished off.\nThe rear head is damaged but repairable, the front head is good. The drive side cover has been reworked by somebody to fit an alternator. it is not the original cover as can be detected by the mating number being different. After removing the putty and reworking the dome it can surely be reused. The tank is an original one, not an Indian copy.\nThe RFM (straight lugs)has been powder coated black already. I am pretty sure I also have the two front stand legs and I will probably find some more parts to throw in.\nWhat you see is what you get.", "label": "Yes"}
+{"text": "Private Hire Insurance Quotes\nWE ARE NOW LOOKING TO SECURE A PRIVATE HIRE INSURANCE QUOTES COMPANY/BROKER TO JOIN OUR VIBRANT TEAM IN EAST LONDON. SUCCESSFUL CANDIDATES WILL BE GIVEN THE EXCLUSIVE OPPORTUNITY TO ESTABLISH A CONSOLIDATED BUSINESS MODEL AND BENEFIT FROM A HUGE CUSTOMER BASE. COUPLED WITH THIS WE’RE OFFERING EXCLUSIVE OFFICE SPACE AT OUR VENUE IN BARKING.\nYOU WILL BE PROVIDING BOTH IN-HOUSE AND ON-LINE PRIVATE HIRE INSURANCE QUOTES.\nALL APPLICANTS MUST BE APPROVED & REGISTERED WITH THE FSA EITHER DIRECTLY OR VIA AN AR BASIS.\nFOR FURTHER INFORMATION PLEASE CONTACT VIA EMAIL ONLY: ADMIN@THEVEHICLESITE.CO.UK\nTypically a years insurance will cost around £2,000-£3,000 for fully comprehensive insurance on a standard saloon car. However, as we all know there are a variety of factors which take a premium from the hundreds right though to the thousands. To top it all off remember that not all insurance companies offer the same prices so make sure you shop around to get yourself a good deal. If you can’t commit to an annual policy bear in mind that most insurance companies will offer 1,3 & 6 month policies as well as the standard 12 month policy.\nPlease note, with some companies who offer private hire insurance policies you will not be able to build up your no claims bonus with a short policy so always ask before it’s too late.\nHow can I reduce the cost of my insurance?\nBuying a private hire insurance policy is just like getting insurance for your own private car so it’s safe to say treat the process similarly. Shop around, ask friends already in the trade or you could always pop into a local mini cab firm and ask the drivers or the controllers.\nLevels of cover\nYou can choose from three levels of cover: comprehensive, third party fire and theft and third party only. Your choices for this will depend on the age and value of your vehicle. Fully Comp insurance will obviously cover everything but you will pay more. Third party insurance will only protect your customers and any other vehicle involved in an accident. You would be responsible for the costs associated to your own vehicle repair.\nNo claims discount\nNormally, your No Claims Discount (NCD) will only apply if you have no claims from another private hire insurance policy. However, some insurance companies will accept proof of NCD from your personal car to your private hire vehicle. If you do build up your no claims bonus you’ll get a substantial discount on your private hire policy ranging from 20% up to 60%. Having a clean drivers license with no offences will also reduce costs.\nAdding voluntary excess on to your policy can save you money and reduce your private hire insurance premium. If you increase the excess and have to make a claim then any savings will be lost. Compulsory Excess will normally start at around £250, so get quotes for increasing the level and see what difference it makes to your policy.\nWhere can I get cheap private hire insurance quotes?\nThere is no definitive answer to this as it’s not a straight-forward cost which can be estimated. It all depends on many factors, so the best advice is to get as many quotes as you can. This may take a few hours longer but could end up saving you hundreds of pounds. If you find that insurance costs are too high then you may consider renting a vehicle from your operator which will normally include insurance and all other costs for about £35 a shift. This route may prove cheaper than using or buying your own vehicle and having to insure it yourself.\nReplacement vehicles – a final note\nIf your vehicle breaks down or you are involved in an accident and your car needs to be repaired then it means you are not working and you are not earning, so it might be worth looking for an insurance policy that offers breakdown cover and replacement PCO licensed vehicles so you can still work. Costs for this will vary and so may not be an option, but when shopping for policies ask for a quote with this added and you may be surprised at how little extra it costs. While you’re at it always ask about cover for loss of earnings. If you have an accident or your vehicle is in for repair you’re losing out on an income and need to be indemnified.", "label": "Yes"}
+{"text": "You can now sit in the Aurus car Putin rides around in रूस-भारत संवाद\nA showroom in Moscow is giving potential customers the exclusive opportunity, but official sales – and test drives – are only scheduled to start in 2020.\n“Putin” – Google News\n1. Russia from Michael_Novakhov (116 sites)", "label": "Yes"}
+{"text": "My gf and I went to buy a Fiero. Perfect condition. All service records. 25,000 on the odometer. The only problem, she says, is that it “drove like a truck”. Can anything be done about it short of putting the body onto another car?\nCan you define “drove like a truck” for us?\nThis can mean different things to different people.\nAre you referring to a stiff, rough ride?\nAre you referring to a high level of road noise?\nAre you referring to cornering ability that is not very good?\nAre you referring to “heavy” steering (i.e.–a lot of effort needed to turn the wheel)?\nAll of the above?\nNone of the above?\nWhat YEAR Fiero? All except the last few GT models had a Chevette front end under them…\nIt’s difficult to say. There isn’t really much of a following in the aftermarket for these cars. They didn’t make very many of them and they didn’t make them for many years. It was also not really intended to be a sports car, but a sporty commuter car. Have you tried to locate a Fiero forum to post this question on?\nOne theory of mine: Perhaps it “drives like a truck” because it is rear wheel drive? RWD vehicles steer and handle differently than FWD vehicles, and this may be what she is experiencing.\nAll of the above\nI think it was a '94 but I cannot be certain\nI would be open to other forums to post my question if you care to suggest any good ones. She is accustom to driving her Passt (or whatever it is) which is front wheel drive so you may have a point there.\nI told her: maybe the power steering was weak, easy fix; stiff shocks, also easy fix.\nThe best Fieros are the some of the last GT models built. If this Fiero you’re considering is a very early production model (84, etc.) then you should reconsider this.\nI worked for a large multi-line dealer including Pontiac/GMC and did not get involved in these cars as I worked on the import lines.\nThe early Fieros were coming in on the tow truck hook on a weekly basis with serious engine issues and many with less mileage than what the one you’re considering has on it.\nOne day in particular really riled up the guy who was responsible for these particular repairs when 3 of them came in on the hook on the same day; all of them the same color no less.\nAs to the ride, these cars rode a little rough anyway. Maybe the problem with this one is aged and worn out shock absorbers or your GF has been accustomed to driving something a bit more plush before getting into this thing.\nMy oldest son’s 4th Gen Camaro also feels like a logging truck after driving my Lincoln.\nAs usual, ok4450 makes excellent points.\nThis car was never designed to have a plush ride or to be quiet. Originally, this was going to be GM’s “City Car”–i.e.–a cheap two seater designed to take Dad to the train station while Mom drove the wood-paneled station wagon for shopping and picking up the kids from school. Late in its development cycle, this 2-seater morphed from cheap commuter car to inexpensive pseudo-sports car.\nBecause of its original design goal, GM cheaped out on the suspension components, using their absolute cheapest car at the time (the Chevette) as the source of the Fiero suspension.\nThus, a new Fiero rode like an oxcart. The passing years, with resulting deterioration of shocks and bushings, would only make the ride worse than it was originally. New shocks will help a great deal, but as the old saying goes, You can’t make a silk purse out of a sow’s ear.\nAnd, then there are the mechanical issues aluded to by ok4450. The 4-cylinder engines on these cars had a tendency to run very hot, and they also had the distressing tendency to throw connecting rods through the side of the engine block. I suppose that your intended purchase would have suffered this fate years ago if it was going to do so, but you should be aware that these cars were not exactly GM’s greatest engineering achievement.\nIt is interesting to note that the same engine (the Iron Duke), when installed in other GM cars, did not have these problems, so something with the Fiero’s basic design (likely the cooling system, with lines running from the rear engine to the front radiator) had something to do with the very real engine problems in these cars.\nIf this Fiero was made in the last year of its production run, then it is possible that you have one that had most of the bugs worked out of it, as GM’s practice in those days was to put vehicles into production without complete development testing, and to use the early buyers as their test drivers/guinea pigs. With this model, just like many of their other models from the '70s and '80s, they finally became decent cars just before they were discontinued.\nThe last Fiero was the 1988 model. The 1988 model is the only model that’s worth a damn IMHO. The pre-1988 models Has mish-mash of Chevette and Citation suspension bits. Only the 1988 model had a suspension that was tailored to the car. The V6 model is the one to get unless you enjoy putting out engine fires.\nMy daughter had one of these cars and she LOVED it. It was a 5-speed and she drove the heck out of it. The 4 cylinder engine is the Pontiac “Iron Duke” and is bullet proof. Heat in the engine compartment IS a problem…The cooling system for the engine is a Rube-Goldberg nightmare with steel tubes running through the center “backbone” up to the laid-back radiator.\nThese were ALWAYS high-maintenance cars…After 20 years, they are REALLY high-maintenance…Finding parts means finding a parts car.\nMy gf and I went to buy a Fiero. Perfect condition. All service records. 25,000 on the odometer.\nWith even the newest Fieros being over 20 years old, you must have the mileage wrong. Has it been in storage for 20 years? Personally I would stay away from this car.\nPersonally, I like the cars (especially the later GT) but would never want to pay a normal retail price for one. Cheap enough, then maybe I’d consider it.\nI don’t remember what the deal was with the early 4 cylinder engines but they were essentially roasting themselves. It was not uncommon to see vehicles with 20k miles needing a new engine.\nOn a side note, there is a Chevy 350 conversion kit offered for these things. A 383 stroker kit and a nitrous bottle…\nAs I remember it, the early 4s had a shortened oil pan to let them fit, resulting in low oil capacity (3 qts?). Folks used to normal Detroit iron wouldn’t check very often, and much over a quart or so low was enough to kill the engine, with rods going through blocks, that kind of thing. The oil would then leak onto the exhaust, starting a fire.\nThat sounds like a reasonable cause and effect scenario for explaining the fate of many Fieros.\nBut…A 3 qt oil pan?\nWhat was GM thinking?\nOr were they?\nIf you’re looking for a two seat mid-engined sports car, I suggest looking at Toyota’s 1st or 2nd generation MR2. They were designed from the start as sports cars, unlike the Fiero, and didn’t have anywhere close to the number of mechanical issues the Fieros did. There is also a surprisingly strong aftermarket for them even though they’re relatively rare.\nIf you are not specifically looking for a mid-engined car, then don’t get one. It takes a little getting used to. It’s much easier to lose control in one if you drive too aggressively.\nIt gets worse - one source claims it was a typo, both in the manual and on the dip stick, that indicated 3 qts while the real capacity was 4.5 qts, resulting in frequent under-filling and resulting oil starvation, which, combined with defective rod castings (told you it got worse!) resulted in rods breaking/blocks punctured/engine fires…sheesh, what a mess!\nFieros Do Not Have Power Steering. They’re A Man’s Car. I Don’t Have A Problem With The “Armstrong” Steering On Either One Of My Fieros, But If I Wasn’t So Strong . . .\nThere’s enough plumbing involved with a rear or mid engine car just for the cooling system. Some Fieros added to that with air-conditioning, but none added the headaches of long-distance power steering.\nAlso, drivers of sports cars, or any cars for that matter that have manual steering (like all cars at one time), know there’s a little technique to steering at low speeds. You don’t sit still with your foot firmly planted on the brake and crank the steering wheel (I don’t even do that with power steering, but I see inexperienced or novice drivers do it.) My daughter’s school bus driver does it and grinds small holes in the asphalt at the end of our driveway.\nIt’s much easier to get the vehicle moving ever so slightly and then turn the steering wheel, not Rocket Science, really.\nI have one of the earliest (first year) 4 cyl. 2.5L, 4 speed manual coupe Fieros and one of the last year, V-6 2.7L, Automatic fastback GT model with 45,000 miles and all documents including window sticker from new. Neither car drives like a truck in my opinion. They don’t cruise nearly as quietly or cushy as my Bonneville, but I wouldn’t want or expect that. Besides, they only carry two people. They do hold the road well and handle curves at speed.\nI have a blast driving either car, but the 4-speed is an afternoon car because it’s too hard to drink a couple gallons of morning coffee and shift.\nI do remember that years ago I took the 84 in for a RECALL and when I got it back the oil was new, the dipstick had migrated to the opposite end of the engine compartment and there was enough shiny foil covering things that it looked like an experiment from the NASA lab.\n“Pontiac Fiero handles like a truck. Can anything be done about it?”\nGo look at something else. Get what other people have. I wouldn’t buy any car I didn’t like.\nP.S. I got a good laugh from people who have posted comments without having experienced owning and driving the car first-hand. They have been trouble-free cars.\nWell, CSA, you gotta cut us a little break, not many Fiero drivers around! So what, exactly, was the situation with the early I4s? What was the actual oil capacity?\n…and what did they have to do to your engine in order for the dipstick to migrate to a different position? Or, did they drop a new engine into it?", "label": "Yes"}
+{"text": "Last updated Dec 26, 2009\n[img][/img]Brewster Green SD-455 custom black interior number matching drive train with 24k miles. It has a turbo 400 automatic which I bought with 14k miles but drives so nice one cant help to add a couple extra here and there. Its called bonding!\nI own a second 73 SD (see album) car in a 4-speed that is the same color and trim pack. It too carries the sd motor and is also number matching but is restored for show. Built and shipped on the same day their a matching pair of his and hers from June 6th of 1973.\nSD motor options with black deluxe or custom interiors. Both have the optional screaming chicken, custom trim pack with one sporting Rally II's and the other Honey combs.\nNone, both cars are stock.\nPermanent Link to this Car", "label": "Yes"}
+{"text": "CJ Panila built his 1956 International Harvester S-110 truck to be a daily driver. In the Philippines it is difficult to find Chevy, Ford, and International parts and when you do they are expensive. So CJ turned to the abundant and cheap Toyota parts to update his truck.\nThe truck’s factory frame was rusty and worn out so CJ replaced it with a 1996 Toyota HiAce Granvia chassis. He also kept the Granvia’s powertrain, suspension, brakes, power steering, and electric system.\nThe truck originally came with a carbureted 3.6 L SD-220 inline-six but is now powered by a turbocharged 3.0 L Toyota 1KZ-TE diesel inline-four. The Toyota motor features indirect injection and delivers more power and better fuel economy. CJ chose to keep the Toyota four-speed automatic transmission for easier daily driving in heavy traffic.\nThe interior features the Granvia’s instrument panel and aftermarket air conditioning, sound system, and custom center console with cup holders and speakers. On the outside CJ installed aftermarket side mirrors, bed cleats, rear-view camera, and a set of Rota 17×9.9-inch wheels.\nCJ is pleased with the project’s outcome. He now has a unique truck that is more comfortable, dependable, and much easier to fix. Be sure to view CJ’s last project, a 1974 Comet with a RB24S inline-six.", "label": "Yes"}
+{"text": "Mr. Schultz enjoys mowing his lawn. It takes him about an hour. He has a riding lawn mower. Mr. Schultz sits on his riding lawn mower and drives it all around his yard. He cuts the grass about every ten days. Sometimes, it rains a lot. Then he cuts it once a week. The lawn mower he uses is 22 years old. One spring, Mr. Schultz goes into his garage. He sits down on the seat of the mower and turns the key. Nothing happens.\nMr. Schultz gets off the lawn mower and opens the hood. He looks around at the different parts of the engine. Maybe the battery needs to be charged. Mr. Schultz plugs in his charger and connects it to the battery. Then he goes inside to wait. About two hours later, Mr. Schultz returns to the garage. He unhooks the battery charger and tries to start the engine again. When the key turns, there isn’t even a sound.\n“The battery must be completely dead,” Mr. Schultz thinks to himself. He looks at the battery and writes down what kind it is. Inside his house, a quick internet search shows that the battery costs $75 and that it is in stock at Robinson’s Hardware. Mr. Schultz gets in his car and drives nine minutes towards town. Robinson’s Hardware is just outside of town.\n“Good morning, Peter!” Mr. Schultz says to Peter Robinson, the owner of the hardware store.\n“Good morning, Mark! What can I do for you today?” Peter replies.", "label": "Yes"}
+{"text": "2009-19 Nissan GT-R [R35]\nPagid Brake Pad (track use) Rear by Mine’s for R35 GT-R\nExclusively manufactured for Mine’s, this Pagid brake pad is made of a combination of non asbestos material and ceramic. It produces a superior and more stable braking experience. Several compounds are offered for street and race track driving. The product is a perfect match to the Mines Big Brake Rotor Kit.", "label": "Yes"}
+{"text": "Jim Hawker launches the Chamberlain 8 off the start at Rob Roy, 17 June 1946, the car enveloped in a haze of acrid, blue, two-stroke smoke, spectators ears ringing with the sound of the ‘banzai’ engine at 7000rpm…\nAs you will see from this article, the Chamberlain 8 is a remarkable car built by equally amazing men, Bob Chamberlain and his brother Bill Chamberlain with later support of some of Australia’s most talented engineers.\nThis long piece is in two parts with several subsections;\nThe first is a reproduction of an article about the car written by John Medley published in a marvellous magazine, Barry Lake’s ‘Car’s and Drivers’ way back in 1977.\nJohn is one of Australia’s best known Racing Historians having written for numerous publications in Australia and overseas for years. He is also a racer and author of two books; ‘Bathurst Cradle of Australian Motor Racing’ and ‘John Snow Classic Motor Racer’. In addition he contributed 3 chapters to Graham Howard’s seminal ‘History of The Australian Grand Prix’.\nA subsequent ‘Letter to The Editor’ of ‘Cars and Drivers’ by John Cummins, who worked on the car at Chamberlains’ post war is included as Part 1B to add more detail.\nA summary of the cars history post war is written by me (Mark Bisset) based on John Hazelden’s book ‘The Chamberlain: An Australian Story’, John owned the car after the Chamberlain brothers deaths, the book chronicles the ‘Beetles’ full history inclusive of every event in which it participated. This subsection is Part 1C of the article.\nThe second part draws from a book written about Bob Chamberlain, ‘Chamberlain Australian Innovator’ and his significant engineering and business achievements which were so much a part of the first century of automotive engineering in Australia. The book was was written by Bruce Lindsay.\nPart 1.by John Medley…\nThat which hath been is that which shall be; and that which hath been done is that which shall be done; and there is no new thing under the sun. Is there a thing whereof men say ‘See, this is new?’ It hath been already in the ages that were before us’- Ecclesiastes…\nAustralian motor sporting history has seen some quite remarkable instances of original thinking-the V6 1.5 litre Clisby engine, the Waggott four-cylinder engine, Eldred Norman’s Eclipse Zephyr Special, Jim Hawker’s Peugeot V8 engine, the Offenhauser copy based on Salmson engine, to name but a few.\nPerhaps the most remarkable of them all, however, was a car created almost 50 years ago in Melbourne. It was (and is) living proof that there is little new under the sun. The mind boggles at the time, patience effort, and skill that went into its construction.\nImagine, if you can, a one off special built almost 50 years ago (now 90) and having the following features;\n1. A 4 cylinder stepped bore, 8 piston, vertically opposed, supercharged, 2-stroke engine with 2 crankshafts one of which runs through the skirt of the top pistons.\n2. An engine which runs to 8000rpm.\n3. Twin plugs per cylinder producing 64000 sparks per minute (from 8 coils) at 8000rpm.\n4. Front wheel drive with inboard brakes.\n5. Four wheel independent suspension.\n6. A space frame chassis of small diameter tubes, much of it triangulated.\n7. An 1100cc 85+ BHP motor.\n8. Virtually the whole car built in Australia.\nAny one of these features would have been remarkable and distinctive in 1929 when the car itself was built, or in the early 1930’s when the present engine was inserted. In combination the assemblage of features makes for one of the most amazing cars the world has seen. That it was constructed by a small group of enthusiasts rather than a large and experienced factory makes it all the more remarkable.\nThe car is the ear-splitting Chamberlain Special and its builders are Alan (Bob) and Howard (Bill) Chamberlain (with a little help from their friends). Bob built the original car while Bill built the 8-cylinder, 2-stroke engine.\nThe Chamberlain last appeared when entered for the Historic racing events at Sandown in 1973. In the early 1950’s it had been put away in a corner of the Chamberlain workshop and more or less forgotten-except when a bit was needed for some project or other, when it was robbed of parts. When it was decided to run the car again in 1973 the Chamberlains found one of the coils, a collection of sprockets, a 2 inch Vacturi carburettor and a large number of racing spark plugs were missing. Replacements had to be found before the car could be enticed from its lair.\nIt started at the second try after lying idle for about 20 years! The car ran well in private practice on the Thursday before Sandown (mainly practice for Bob Chamberlain who hadn’t raced for 40 years!) A water leak from a corroded engine cover plate was fixed and the car returned to Calder the following day. After an uneventful session Bob stopped and then promptly everything locked solid. At the time they thought it was the clutch but after some dismantling they realised that the problem was the engine bearings. Castrol ‘R’, the vegetable based racing oil which had been in the engine for 20 years had oxidised and gummed up the crankshaft bearings. Castrol supplied a solvent in an attempt to dissolve the mess although they weren’t very confident of its success and, in fact, it didn’t work.\nThe job of dismantling the complicated engine was just too great in the time available so the car did not race at Sandown, although it was brought along as a static display-a bitter disappointment to its owners and to those who had come to experience the sight and sound of this remarkable car.\nBob Chamberlain built the car in 1929, all except the engine being virtually as it is today. The car’s first engine was a big-valve Daytone Indian motor cycle unit. In this form, the road registered car covered thousands of miles but trouble was experienced with the valve gear. A slightly smaller capacity four cam Altoona Indian motorcycle engine was installed, proving more reliable. To increase the capacity and the performance, Norton barrels were fitted to the Indian crankcase. The car now became quite competitive, particularly in sprint events, easily holding the Wheelers Hill (in outer Eastern Melbourne) record for example. It ran in the numerous sprint events run by the Light Car Club of Australia, Junior Car Club and the Royal Automobile Club in Victoria during the period, as well as circuit races at Aspendale (inner Melbourne bayside suburb) and Safety Beach (holiday destination on Melbourne’s Port Phillip Bay).\nEntered 3 times for the AGP at Phillip Island, the car was not successful. At the first attempt a piston seized due to the alloy being unsatisfactory. By the following year the Chamberlains had made their own pistons from ‘Y’ alloy and the car completed practice without any troubles. In the race it only lasted 3 laps, when a crankpin broke.\nBob had trouble recalling a third attempt at the Island but checked his records and found that the car was indeed entered and listed as supercharged, although he is sure the car did not actually race in this form. Bob says that the blower was fitted to the Indian motorcycle engine and the compression lowered in the hope of improving big-end bearing life. It didn’t work out that well but this 2 cylinder supercharged engine powered the car at several meetings at Mebourne’s Aspendale Speedway as well as a number of hillclimbs, with some success.\nThen, in 1934, in Bob Chamberlain’s first attempt at Mount Tarrengower, the car crashed not too far from the site of Peter Holinger’s 1977 accident. It has been said of Mount Tarrengower that if you make a mistake you have to fight for airspace with the pigeons. Bob Chamberlain was saved from that battle by a stout tree, which he scored at top speed just beyond the finishing line.\nShortly after this Bob Chamberlain went overseas, handing the car over to brother Bill, who built and fitted the engine which is in the car now. Even on the plugs specially made in the UK for the car, oiling up was a problem and the Chamberlain did not appear often in the late 1930’s. Significant advances in spark plug design in World War 2 and the deeper involvement of Jim Hawker gave the car a new lease of life in the early post-war years. Once again hillclimbs and sprints echoed to the high-pitched scream of the Chamberlain.\nThe engine resembled a design by W Jamieson (not to confused with the famous Murray Jamieson who designed the twin-cam Austin 7 engine and later the ERA engine) which was publicised in the early 1930’s. To the Chamberlains to build one for fun ‘seemed like a good idea at the time’.\nThe layout, though similar to the Jamieson design, used stronger parts. A Henderson motorcycle crankcase casting, suitably machined, formed the basis. This, rather like the Morris Mini motor, uses unit construction so that crankshaft, clutch, flywheel and gearbox all live in the same oil. On top of this was the block, a very complex casting (which was to cause problems later on). A multi plate cork insert clutch was built and the bottom crankshaft was machined from a 6.5 inch solid steel billet. Fully counterbalanced, this crankshaft runs in three roller main bearings. The bottom pistons have a bore of 62.5mm and a stroke of 75mm, giving the lower pistons a swept volume of 968cc while the upper, opposing, pistons have a swept volume of 100cc giving a total of capacity of 1068cc.\nThe top part of the bore is narrower, at 35mm, with intake ports at the top and exhaust ports at the bottom. The small piston which moves up and down to open and close the intake ports is of unusual shape, being bottle shaped. The ‘neck’ slides in the bore, exposing and closing the ports. The ‘body’ of the bottle are two holes, one small hole for the gudgeon pin and one large hole through which the top crankshaft (linked to the gudgeon pin by a little 1.5 inches long conrod) passes. This top crankshaft spins in five main bearings and is linked to the bottom crankshaft by chain.\nThe two pistons per cylinder design allows quite independent timing of the inlet and exhaust ports-thereby overcoming one of the inherent shortcomings of a normal one piston per cylinder two stroke design. The top crankshaft is actually timed 27.5 degrees behind the lower crankshaft. This allows the intake ports to remain open after the exhaust closes, to take advantage of the higher blower pressure-which then can actually pressurise the ingoing gases in the cylinder.\nThe distinctive feature of the engine is the short inverted top connecting rod. With this design feature the great angularity of the conrod produces very much greater movement of the piston near outer dead centre (port opening position ie: when the opposing pistons are furthest apart) than near inner dead centre (firing position when the pistons are closest together) for any particular crank angle. This enables a much greater port area to be obtained for a particular timing.\nA snag, though, proved to be the complicated casting of the block. Because of this, the ports were not all in line, so it was necessary to alter the height of every piston in order to get the port timing correct for each cylinder. Then, to maintain the right compression ratio for each cylinder, the shape of the head of each piston had to be machined differently and the pistons were therefore not interchangeable. Once all this was done, by trial and error, educated guesswork and continued experimentation, the engine ran well.\nAfter much experimentation, electrics were supplied by eight coils, one for each plug. The pre-war mica-insulated plugs with thick copper electrodes were a continual source of worry; aluminium oxide insulated plugs developed during WW2 solved this.\nCarburetion is by a huge device of SU design but built entirely in Australia. A 1/2 inch diameter fuel line feeds pure alcohol via huge float needles and huge jets and needles to this hungry motor. Getting the needle taper correct and mixtures right over the whole range required an immense amount of patience and hard work. A large Rootes-type supercharger sometimes running at 28lbs boost, is driven by chain from the top crankshaft.\nFiring order is 1-2-3-4 and the engine runs anti-clockwise when viewed from the front. For reasons of balance the 90 degree angle between the crankpins is made at the centre bearing so that crankpins 1 and 2 are opposite one another, likewise 3 and 4.\nNo true power figures are available. Apparently the engine has been dynoed’ once, showing 84bhp at 5800rpm, although this was with the engine running on standard petrol, with low compression (6:1) pistons fitted and with only 12lbs boost from the supercharger. The ultimate power output was probably quite a bit higher than this figure.\nA chain transmits power from a bevel drive on the front of the bottom crankshaft to a 3 speed ‘crash’ gearbox (also built by the Chamberlains).\nThe tubular space frame chassis is very light and strong, having been lengthened by 4.5 inches to accommodate the present engine. Rear suspension is by transverse leaf spring and swing axles. Front suspension is also by transverse leaf spring and lower wishbones. Typically vintage Hartford shock absorbers provide damping. Front drum brakes (cable operated) are inboard to reduce unsprung weight. Chamberlain designed constant velocity joints are used to transmit the drive.\nThe radiator is in 2 halves, the top half above the axle, the lower half in front of the axle. The large radiator core thus permitted does not spoil the frontal appearance.\nThe narrow body is typically late twenties in appearance, with the passengers seat staggered back from the drivers. Only a little over 2 feet wide at its widest, the body was built to accommodate the 9 stone Bob Chamberlain in 1929, plus riding mechanic. Now, nearly 50 years later the car has only enough room for 14 stone of Bob!\nAt a mere 11 cwt, the Chamberlain is very light for a car of its period, and possesses healthy acceleration even now.\nIt is, without doubt an astonishing car, a monument to the enthusiasm, dedication and sheer mechanical ingenuity of a small group of enthusiasts ‘because it seemed like a good idea at the time’.\nLet us hope that we once again will be able to hear the ear-splitting scream and see the tyre destroying acceleration and characteristic cloud of dense blue, 2-stroke smoke of the inimitable Chamberlain 8.\nPart 1B.by John Cummins…\nAustralian Racer John Cummins worked for the Chamberlains and wrote a letter to the editor of ‘Cars and Drivers’ #3 to recount his experiences having read John Medley’s article above.\nThese are truncated excerpts from that letter…\n‘I was very interested in the article on the Chamberlain 8 as it formed the basis for most of my early motorsport experiences in the workshop and at the few hillclimbs and events held in the immediate post war period. I was apprenticed to the Chamberlain’s organisation from 1946 to 1950 and this was the time when the ‘Beetle’ as it was known inside the factory was rebuilt and developed’.\nThe team involved in the car comprised most of the brains in Australian automotive engineering. There was Bill Bargarnie, representative at the 1936 Isle of Man Motorcycle races, speedcar builder/driver…Allan Ashton of AF Hollins who used to look after Alf Barrett’s Alfa Monza, BWA builder and also prepared the cars of Lex Davison, Reg Hunt and others…Phil Irving…Len Sidney responsible for the invincible Mussett Velocettes of the period and Co-Founder of the 500cc Car Club in Australia…Jim Hawker who at the time had only trials experience…was involved in many projects including building a V8 Peugeot engine from ‘two fours’.’\n‘Some additional background material to John Medley’s excellent article…It took Grimwade castings 32 tries before they were able to cast a block that was usable and was not completely porous’.\n‘After the post-war period it had so much power that the Henderson crown wheel and pinion wouldn’t stand the torque, pushing the crown wheel away from the pinion. Being front wheel drive, it was necessary to strip the engine down to the bare crankcase before a complicated machining job could be done with the Kearns horizontal borer, which allowed enough room to fit a very thin, but large diameter thrust race between the crown wheel and the inside of the gearbox casing.’\n‘The conrods in the engine were from an A-Model Ford and the SU carburettor, which was later replaced by a Vacturi, was of 2.5 inch diameter and was brought to Australia by Bill Bargarnie before the war as partly machined castings-Alan Ashton and Bill making the rest of the parts in the Chamberlain factory.’\n‘Jim Hawker tried all over the world to get the correct type of spark plugs for the engine before finally giving up and making them himself. The centres were obtained from Olympic and the body and locknuts came from Pyrox Australia. Templates were made for each heat range, special drills ground for the correct internal shape of the plug body and a large number of grinding wheels of the aluminium oxide type were ordered. With 8 plugs to a set plus spares in each number of the heat ranges, a formidable total number had to be made. Jim set up a turrett lathe with the hexagon bar and started producing the outer bodies. Yours truly had the job of rough grinding the centres by hand on a pedestal grinder. The bodies were then heat treated and the spark plugs assembled. The pattern maker made a beautiful wooden box in which to hold this enormous range of hand-made plugs.’\n‘The reason behind all this effort, of course, was that the correct mixture and the correct heat range of plugs were essential as a holed piston in that complex engine meant hundreds of hours of stripping and rebuilding’.\nPart 1C.Chamberlain 8 Post-War: A Summary…\nAs the War was finally over the minds of enthusiasts turned again to motor racing. Engineer and 1934 Isle of Man competitor Bill Balgarnie worked for Chamberlain Industries during the war, he prepared the car for the first event in Victoria post-war, a Hillclimb at Greensborough, in Melbourne’s outer north-east in November 1945.\nAs usual, the car misfired. Bill was convinced the engine was starved of fuel and set about machining an SU type carburettor of around 2 inches in diameter from castings he acquired in the UK pre-war. He also made changes to the ignition system.\nBill Chamberlain took over the car when Balgarnie went to WA to work on the Chamberlain tractor manufacturing project. Chamberlain only raced it once at Rob Roy before he too moved to WA, giving the car to his cousin Jim Hawker to develop after he was demobbed from the RAAF.\nHawkers two fundamental changes were to make higher compression pistons to suit the better post-war racing fuel and making his own spark plugs, as related by John Cummins above.\nThese used local ‘Olympic’ aluminium oxide insulators, Jim forming by hand, a range of ‘hot ends’ to make a range of ‘cold’ plugs. A quick test run down Salmon Street, Port Melbourne was successful, Hawker entered the Mount Tarrengower, Easter 1947 meeting winning its class. Pakenham Airstrip in May followed, then the Geelong Road illegal, as in unauthorised by the authorities, sprints in June resulted in FTD. Rob Roy in November was also entered.\nThere were still ignition problems so Jim came up with a solution; 8 coils, 1 for each plug, 4 contact breakers, 4 complete double ignition systems , 64000 sparks per minute. The result 96bhp @ 7000 plus rpm. The new ignition system passed with flying colors, no problems at all with a sprint at Killara Park, the home of Lex and Diana Davison near Lilydale.\nHaving got the car running really well Hawker then sought more power. He made some higher compressions pistons, about 10.5:1 and increased the speed of the blower to run at above engine speed, this produced 15 pounds of blower pressure, previously this was 12 pounds. He increased it further to 18 pounds .\nAn event at Rob Roy in May 1948 convinced Jim, when he failed to better his previous Rob Roy time that 15 pounds was the optimum. ‘Rootes type superchargers were notoriously inefficient above 15 pounds pressure, and to obtain 18 pounds pressure I was running at about 7500 rpm and losing out by the increased power required to drive the blower’ said Hawker.\nRob Roy 1948 was to be the last race for Jim although he did do a demonstration at Rob Roy 47 years later!\nThe Beetle was parked at the back of the workshop in Salmon Street and Jim concentrated on marriage, his role as factory foreman and his role in taking new Chamberlain Industries products to market\nAnd so, the Chamberlain was moved around the workshop, contributed the odd part to other cars until 1973, when as John Medley’s article explains the car was entered at Sandown 1973, missing this meeting as a competitor it was present as a static display which aroused enormous interest from those who knew about it and young ones like me who were gobsmacked at its specification and significance.\nThe car was again prepared to run at the 1978 50 Year anniversary of the first Australian GP at Phillip Island.\nThe engine and supercharger were overhauled by Bill, with some modifications to the clutch, the addition of an electric Bendix fuel pump to replace the hand operated one, some paint touch-ups and removal of Hawkers dent in the radiator shell caused by the Geelong Road mishap all those years before…\nThe car set off on the touring assembly but overheated, then the supercharger seized on Sunday, upon inspection post event the nut screwing the rotor to the shaft of the supercharger had unscrewed and jammed against the cover. But the car had at least run again!\nThe old car then raced occasionally at Historic Events; Sandown September 1978, Mount Tarrengower November 1980, Geelong Speed Trials, along Eastern Beach in 1982 and 1984, 1984 and 1986 Mount Tarrengower misbehaving at most of these events.\nGeelong 1986 was the wonderful cars final event with the Chamberlains, Bill fell seriously ill and died, with Bob passing way in 1992.\nBill Chamberlain’s children inherited the car after Bob’s death. After consultation with Jeff Dutton, local auctioneer and purveyor of fine cars the Beetle was auctioned… and bought by Dutton who planned to pop it on his wall as a static exhibit in his fine Church Street, Richmond, Melbourne premises.\nThe car was a static exhibit at a function to launch the reopening of Rob Roy Hillclimb by the MG Car Club. John Hazelden, a Melbourne enthusiast with diverse car interests, and passionate about the Chamberlain 8 did a deal with Dutton, the car was his, to be used as the Chamberlains intended, the deal done in March 1993.\nThe scope of this article does not extend into the the modern era, Hazelden used the car…and enlisted Jim Hawkers help to prepare it competing at Geelong, Winton, Mount Tarrengower, Rob Roy, the Adelaide Grand Prix and at the Albert Park Grand Prix carnival…in more recent times the car has changed hands, the engine is being rebuilt, the car at the time of writing is the star exhibit at the ‘Shifting Gear: Design, Innovation and The Australian Car’ exhibition at Federation Square, Melbourne.\nPart 2.by Bruce Lindsay…\n‘Chamberlain Australian Innovator’: Author Bruce Lindsay…\nCheck out the website to this wonderful book about Bob Chamberlain and his immense contribution to the automotive industry in Australia.\nWhat follows is Bruce Lindsay’s synopsis of his book, reproduced in full, as it is a summary of Bob Chamberlain’s life and achievements.\n‘CHAMBERLAIN – Australian Innovator\nAlan Hawker (Bob) Chamberlain inherited a legacy of engineering innovation. His maternal uncle was one of Australia’s most outstanding pioneer aviators, Harry Hawker. His father had established an engineering business in suburban Melbourne, which later led to the incorporation of the Australian Ball-Bearing Company Pty Ltd which survived to 1969.\nHe was born on 16th July, 1908. Raised in an environment where inventiveness and lateral thinking supplanted textbook designs, he graduated in Mechanical Engineering and joined the family firm. The Australian Ball-Bearing Company spread its activities very much more widely than may be assumed from its name. Commencing with the reconditioning of roller bearings, at a time when imported bearings were almost impossible to obtain, the company was incorporated on 4th October, 1922. It augmented its strong market position by expanding into the design and manufacture of kerbside petrol dispensing equipment, general engineering applications, and construction of major industrial plant such as factories and fuel depots. In all such ventures the young Bob Chamberlain was deeply involved.\nFrom his late teens he was captivated by motor racing, and was fired to enter competitive events. In 1929, barely 20 years old, he designed and built a purpose-built hillclimb racing car, notable for its all-welded triangulated steel tube space frame, front wheel drive, and independent suspension on all four wheels. He raced this car with some success, but the modified motorcycle engines used in the car were so highly stressed by racing conditions that they frequently expired due to piston failure. His brother, HF Bill Chamberlain, built a revolutionary 4-cylinder, opposed piston, supercharged two-stroke engine for the car in 1934, in which form it survives in racing condition in private ownership in Melbourne.\nMotivated by the necessity of producing replacements for their racing car, the family company embarked on the manufacture of pistons for internal combustion engines, Bob negotiated the rights for the aluminium-and-copper alloy patented by Rolls-Royce Motors in England, and the family established in April, 1937 the Rolloy Piston Company. From humble beginnings, this company grew to be the principal supplier of pistons to manufacturers including General Motors-Holden and the Ford Motor Company, in the 1950s producing 90% of original equipment pistons for the Australian motor industry, and 100% of pistons required by all Holden vehicles up to and including the FC model.\nAs early as 1931, Bob designed and patented a revolutionary hydraulic transmission, some years before General Motors first marketed their “Hydramatic” hydraulic gearbox. It was known in the works as “Bob’s oil gear”. Bob continued to be active in the design and patenting of a range of mechanical applications, including wheel suspension, novel transmissions and pistons. As late as 1955, the income from royalties paid on his patented designs was yielding more than £49,000 per annum.\nLate in the 1930s, the Federal Government sought actively to encourage the development of Australian secondary industries, as the nation emerged from its agricultural heritage into a world demanding self-sufficiency in manufactured goods. The Government of the day elected to encourage such development through a series of legislative inducements, offering “bounties” for the local production of manufactured items ranging from barbed wire to traction engines. Bob Chamberlain responded to the Engine Bounty Act and the Tractor Bounty Act of 1938 by designing and constructing novel prototypes.\nHis motor vehicle displayed once again his original and lateral thinking, utilising a tubular space frame, independent four wheel suspension, and a mid-mounted engine driving the rear wheels. This was at a time when conventional designs employed a heavy cruciform or ladder chassis frame, seldom were even the front wheels independently sprung, and heavy motors were almost invariably located above the steered wheels. Two prototypes were laid down, one survives at the York Motor Museum in Western Australia. Events such as the Second World War and the decision by General Motors-Holden to start local production killed off the venture.\nIn response to the tractor bounties being offered, Bob designed revolutionary prototypes, in Melbourne, of a new type of tractor specially suited to the conditions of Australian broadacre farming. A growing national population needed more food, and State Governments hastened the opening of marginal lands. In Western Australia, for example, the minimum size for an economically viable wheat farm in such lands was in 1950 deemed to be 2000 acres. Parts for the prototypes of the tractor were constructed at Port Melbourne as early as 1943, but War interrupted the development of a promising design.\nBob Chamberlain was then commissioned to work with local and American designers on War machines, at the express direction of the Rt Hon R G Menzies, then Prime Minister of Australia. He utilised the experience gained in the USA to contribute to the Australian Tank Project, intended to supply the Australian Army with a medium-weight tank in such quantities as would serve to repel the expected invasion of northern Australia by the Japanese armed forces. The Australian Cruiser AC1 tank incorporated much of his conceptual, design and engineering work, even though for political reasons it never saw quantity production. He worked on a range of significant wartime projects as part of the Directorate of Ordnance Production until 1943.\nDrawing upon his experience in the remanufacture of ball bearings, he was required to plan and equip a roller bearing manufacturing facility intended to serve the War effort, and which was to be located in Echuca in northern Victoria as part of the Commonwealth Government’s decentralisation program. Although hostilities ended before this facility saw full production, it remained operational to serve the needs of an emerging industrial and manufacturing infrastructure.\nImmediately following the end of the War, the need for expanded agricultural production was made more pressing by the return to Australia of servicemen and servicewomen requiring to be absorbed into the workforce, many of whom were to be resettled on the land. Imported tractors were scarce by virtue of their high cost, and their subjection to rigorous quotas because of tight restrictions on foreign exchange. So there was renewed Government interest in Bob’s prototype tractor.\nRemarkable for its audacity and its dimension, a plan was in 1946 agreed between the Federal Government (who made available a new but unused munitions factory in outer suburban Perth, sold now-unwanted munitions and associated machinery to the new venture at 50% of new price, and assured Loan Council approval for the provision of funds to the West Australian Government to establish a new tractor manufacturing industry); the West Australian Government (which agreed to establish a high-powered Government Committee to oversight the project, and deputed senior bureaucrats to assist at every stage of its development); the State-Government-controlled Rural & Industries Bank of Western Australia (which supplied an overdraft facility upon which Chamberlain Industries may draw in order to develop their manufacturing facility, and which by 1954 had reached the staggering amount of £3.5 million – representing more than 60% of the Bank’s total capitalisation); and the new company.\nAlthough the first tractor was not completed until three years after announcement of the “WA Tractor Project” – in 1949 – it was immediately evident that its large size and weight giving outstanding traction in rough country; its ability to haul large implements to more quickly prepare large acreages and to similarly harvest their product; its ability to travel at relatively high road speeds between distant land holdings; its competence to run on cheap and available kerosene during times of petrol restrictions; and its ruggedly simple design requiring minimal attention beyond routine maintenance, made the new design instantly successful. The “40K” model as that first tractor was known remains operational in sizeable numbers, fifty years after they were built, supported by a cult following amongst the enthusiasts of agricultural machinery.\nWith an eye to lifting the profile of his new designs, Bob produced in 1955 a one-off version of his new medium tractor capable of high road speeds. This tractor followed the highly publicised “Redex” (and later “Mobilgas”) Around Australia Trials. Images of the 110 kph-tractor were flashed around the world, as “Tail End Charlie” mopped up a field of bedraggled, bogged, broken and expired vehicles between Perth and Darwin (initially), and later along the entire route. Its performance was a promotional coup for the company, and the original vehicle remains on exhibit in Perth.\nBob continued to design new and evolutionary tractors and farm implements suited to attachment to the new style of large tractor, working from Melbourne, while his brother FH managed the Perth operation and designed a highly successful version of the “stump jump” plough. Bob saw the need for a smaller tractor, adaptable to industrial applications and specialist roles in the growing of crops such as grapevines, cotton and sugar cane. His “intermediate” tractor – dubbed the “Champion” – was introduced in 1956 and, like its predecessor, was an immediate success despite its extended gestation period. Bob had assumed the role of Managing Director of the company in 1954, when Chamberlain Industries faced growing financial difficulties, leading to the exclusion of the Chamberlain family in 1956.\nReturning to Melbourne, Bob continued work on the design of yet another tractor, this time a small machine capable of competing with products of the smaller imported brands like Ferguson, Massey-Harris and Fiat. He built two prototypes, of which one survives in Melbourne’s Scienceworks Museum. It was intended to be powered by either a sophisticated (and imported) German M.A.N. air-cooled diesel engine, or the ubiquitous Holden motor car engine, in which latter form the survivor exists.\nIt was always his intention to franchise rights to manufacture the small tractor, for which purpose he formally registered its design in 1959. Approaches to a number of farm machinery implement manufacturers unfortunately came to nothing, probably because the landscape of tractor design and sales had changed markedly between 1946 and 1959, and competing makes were already well established.\nHe continued to work for his family companies, developing the motor car oil filter system containing magnetic elements to extract metal particles from lubricating oils. This design was in 1942 taken up by the firm which to this day manufactures oil filters under the Ryco brand name.\nIn 1969 the Chamberlain family elected to sell their interests in both the Australian Ball Bearing Company and the Rolloy Piston Company to Repco Holdings Pty Ltd, itself an iconic Australian motor engineering company, against which Rolloy had for some time been operating in direct competition.\nUndeterred, Bob in 1970 registered a new company under the name of Alan Chamberlain Engineering Pty Ltd, operating from premises within easy walking distance of the former Chamberlain headquarters, in Dow Street, Port Melbourne. This company’s stated purpose was to involve itself in “marine engineering”. Bob had for many years shown a passionate interest in powered boats, and now applied his engineering skills to the development of new products in that field. He took with him two long-serving and very highly skilled staffers – Alan Morgan as a machinist, and Vic Gray as a pattern-maker.\nHe designed, built and then manufactured a “vertical starter motor” for use with inboard-engined power boats. For this invention he was awarded a Prize of the National Safety Council for 1974. On the premise that inboard-engined boats utilised motor car engines, he observed that their electric starter-motors were located at the bottom of the engines. This placed them dangerously close to the boat’s bilge, which all-too-frequently contained surplus petrol drained from the fuel system above. The sparks generated by the starting procedure regularly ignited the petrol-doused bilge water, resulting in explosions and fires.\nHe also designed and built a form of cushioned vee-drive for inboard powered boats, which was markedly commercially successful. His intended triumph – a brand new four-stroke outboard boat motor, the “Chamberlain Ace” – was like his small tractor probably too late into a market developing rapidly, and whose tide he was sadly too slow to catch. His design parameters called for an economical, 4-stroke motor which would produce 40 hp from a sophisticated design utilising four cylinders and 2 gear-driven overhead camshafts. He laid down parts for eight such motors, but it would appear that only one was built, which failed to reach its designed output, and caught fire on test. The sad reality was that, while under development by such a tiny company, the engine was outstripped in output by motors which were readily commercially available, before it could reach the market.\nBob then turned his attention to the reconstruction of highly significant sporting and racing cars which had come into his possession since 1945. Two of these were 1910-built “Prince Henry” Benz sporting cars; and another was the highly significant 1904-built Napier L34 “Samson”.\nIn the case of the Benz sporting cars, Bob used all of his considerable ingenuity to rebuild these cars from wrecks to driving condition, under the envying eye of the original manufacturers. The Napier L34 had been built in 1904, and had held the World Land Speed Record amongst its pantheon of racing achievements. Although the car was broken up in 1911, its remarkable engine found its way to Australia, and into the racing power boat “Nautilus”. After being campaigned in this form for many years, the motor had lain idle in a factory workshop in Brunswick, Melbourne, from where Bob rescued it.\nFinding that the original detailed plans for the car’s construction survived in London, he travelled to England and copied sufficient material to enable him and his tiny team to construct a faithful replica of the original car, which he first drove on the road in 1982, and which he shipped to England for the Jubilee of the Brooklands racetrack in 1983. This most significant motor car survives in the Fremantle Motor Museum in Perth, Western Australia.\nHe continued to work on his historic motor vehicles, and lecture on his life’s work, right up to within weeks of his death in 1992. During his unusually productive life, he had been an important part of the transition of Australia from an agricultural to an industrial economy, charting a path through the hazardous shoals of new experience in the innovative application of engineering principles to industrial design.\nThis book seeks to catalogue his achievements in the evolution of the new industrial order in Australia, in a way not previously attempted. It uses source documents which include Bob Chamberlain’s comprehensive personal diaries, Government records, patent documents, Federal and State Government Hansard, personal accounts from staffers and customers, and the recollections of his family, friends and employees. It also offers to enthusiasts of his products detailed technical descriptions of his output, a collection of data not previously attempted. While the inclusion of such data in a biography may be seen as being unusual, in this case the engineering output is inseparable from the man, and his biography would be sadly incomplete without it.\nThe book chronicles the man’s legacy in terms of the respect in which his designs are still held, and the efforts which are being maintained to keep alive his memory.’\nBill Chamberlain Engine.\nA summary of the engines salient features is as follows; ‘The Chamberlain engine is a water cooled, vertical, inline, 4 cylinder 2 stroke with 2 pistons per cylinder. Supercharged.\nThe bottom pistons have a bore of 62.5mm and a stroke of 80mm. These bottom pistons control the exhaust ports while the top pistons are much smaller, having a bore of 35mm and a stroke of 25mm. These small pistons control the inlet ports and are of a peculiar shape.\nThe large hole in the base of the piston allows the small crankshaft to pass through with the gudgeon pin secured at the opposite end to the head. The small crank has 5 main bearings, the conrods are only 1.5 inches long. the bottom crank is much heavier, was machined from solid and has 3 main bearings. The throws are such that the 4 cylinders fire each revolution of the engine. The 2 cranks are coupled together by chain.\nWith this 2 piston per cylinder design, considerable overlap can be achieved, which is impossible with the single piston 2 stroke design. In this engine the inlet ports are open for 25 degrees of crankshaft rotation after the exhaust ports have closed and, with the inlet ports mounted in the top of the head and the exhaust ports at the bottom of the cylinder wall, better scavenging is possible. The lower connecting rods are from an A Model Ford.\nEach cylinder has a sparkplug mounted on either side of the block. (you can see from the overhead photo below the exhaust layout). Two Bosch aero magnetos were obtained in the hope they would cope with the high engine revolutions’, (The Chamberlain)\nTwo shots of the Chamberlain 8 at Queensland’s ‘The Speed on Tweed’ in recent years.\nBibliography and Credits…\nJohn Medley, special thanks for allowing his 1977 ‘Cars and Drivers’ article to be reproduced. ‘Cars and Drivers’ magazine, wonderful brainchild of the late, talented Barry Lake, Number 2 1977.\nMartin Stubbs for the research assistance and encouragement\n‘The Chamberlain An Australian Story’ John Hazelden\n‘Chamberlain Australian Innovator’ Bruce Lindsay\nGeorge Thomas photographs", "label": "Yes"}
+{"text": "For bulbs, I suggest hella bulbs. With respect to speakers I had 6.25 inch infinity reference component speakers on front doors and 5.25 jbl component speakers on my rear doors. However, I have added jbl 4 ch. amp to drive these speakers. At the time of upgrade I don't know that with space rings rear doors can take 6.25 inch speakers, otherwise I would have gone for the same set of reference speakers which are in the front doors, in the rear doors also. Even with amp. I don't loose the blue and me only thing I lost was whenever the ignition is off I cant play radio/cd. If you want to play music even when ignition is off you can add a switch to on/off the amp, but, every time you have to turn it off whenever, the ignition is turned off. If, you forget to do so, battery will be drained and you won't be able to start the car. I strictly advise you to add an amp to have the full juice out of your upgraded speakers, the stock head unit can't do the justice to the upgraded speakers. Else, before going for upgrade do an audition of the speakers with amp and without amp. you will clearly, know the difference.", "label": "Yes"}
+{"text": "Ford Dealership Serving Margate, FL\nMargate Florida Customer’s Will Find a Great Deal at Grieco Ford of Ft. Lauderdale\nNo matter your new or used vehicle needs we’re sure that we’ll have just what you’re looking for here at Grieco Ford. With our incredible selection of cars, trucks, and SUVs available, there’s a vehicle that meets every budget and matches every lifestyle. What sets us apart further is our drive to deliver the best possible purchase and service experience.\nLocated just thirty minutes away from Margate, our great deals, fantastic selection, and customer service make the trip worth it! Keep reading to see why so many come to our Ford dealership near Margate.\nNew Ford Cars, Trucks, and SUVs\nThe Ford lineup includes a diverse range of vehicles for you to consider. Need a new truck to help you get your boat to the beach? We have new Ford F-150 pickups as well as heavy-duty Ford Super Duty trucks for sale near Margate. Want performance from a Ford Car? Our new Ford Mustang offers to have what you need. Looking for an SUV with both seating and storage for your growing family? The Ford SUV lineup reaches far and wide with safe three-row SUVs like the new Ford Explorer as well as efficient two-row models like the new Ford Edge and Escape. No matter what type of vehicle you need, our Florida Ford dealership has an offer for you!\nSave More With a Used Ford\nIf you’re working with a tighter budget, looking for your teenager’s first car, or are interested in specific features, our used car selection is your solution. You never know exactly the models you’ll see in our collection of used Fords for sale near Margate, but one thing remains a fair price. Of course, we have a terrific selection of used Ford cars, trucks, and SUVs, but we also carry other brands and even pre-owned luxury models!\nEnjoy a Hassle-Free Financing Experience\nSo, you’ve found the new Ford or used car deal that suits you, but what’s the best way to finance your car purchase? Our dealership’s financing department has the answer for every respective car shopper. We’ve helped many who walk through our doors with securing car loan rates or new Ford lease offers near Margate. Our Ford financing center includes many online resources that can help you get started on your car loan application online as well as learn more about the process. Want to learn about leasing versus buying, the type of monthly payments you can expect, or even the trade-in value of your current model? These are all questions our auto financing team can answer!\nFord Parts and Auto Service Center Around Margate\nWhether you’re enjoying thrills from a Ford Mustang or capability from a Ford F-150, service is vital in ensuring a long-lasting driving experience. Well, our Ford service center has the technicians and high-tech gear to make maintaining your vehicle easy. You can use us for multi-point inspections or more serious repairs, and we also help many drivers wanting to buy Ford parts near Margate. Schedule a service appointment with us today!\nInterested in one of our offers or need an oil change? Visit our Fort Lauderdale Ford dealership to see these new and used cars for sale! We’re under a half-hour drive from many parts of Margate, and you can always call or email us with questions you have. We hope you come and see us soon!", "label": "Yes"}
+{"text": "Of course that happened. Because you opened up the engine to breath better, without tuning it. It's going to happen. You need a tune to fix it. No worries though, it's not going to kill your car. I've never tuned mine, while running a Cosworth CAI, F2 header, and Roush exhaust. Of course mine is running lean lol\nActually just removed the Cosi and did the DIY before I hand it over to the dealer tomorrow (traded it on a new Mazda3). I've got to admit, this looks good and nearly stock. I'm proud of myself. Cost me $24 for a Spectre filter at Autozon, $3 for a hacksaw from walmart, and $4 for a rubber gasket-type thing from Lowes to seal it up best I could between the inlet and the filter, as the filter only goes so small as a 3\" inlet.", "label": "Yes"}
+{"text": "Protect the front end of your Corvette while still showing off the front emblem with this C6 Corvette 2005-2013 Front Vinyl Mask.\nProtects from chips from rocks, dirt and road debris. Easy installation and no modifications are needed to install. Removing is a breeze and should be done for a routine cleaning. Constructed from durable, long lasting vinyl.\n- Cut out for front Corvette emblem\n- Durable vinyl\n- Long lasting\n- Protects from dirt, rocks, and road debris\n- Easily installs\n- No modifications needed\n- Easy removal for cleaning\n- Fitment: C6 Corvette 2005-2013\nNote: Not compatible with C6 Z06, ZR1 or Grand Sport models.", "label": "Yes"}
+{"text": "I reviewed a lot of dash cameras this summer and it was time to try something a little bit different: a dash cam for my motorcycle. The first one to arrive was the Thinkware M1 Motorsports Cam system. This system features two high definition video cameras in basically nuclear explosion-proof cases, a central control box with a built-in GPS antenna, and a wired remote control that goes on your handlebars. The system works just like a dash cam system in a car in that it is always recording once you start up your bike, but the remote control system lets you record longer sections of video if you want to capture a longer ride or a specific incident that happens in front of you. It also features electronic image stabilization and a decent app for setup and retrieving files recorded on the micro SD card.\nIt took about half an hour to install the $349 Thinkware M1 system on my Honda sport motorcycle. The camera modules were actually larger than I expected and that precluded me from installing them under the chin of the bike’s fairing, as a big hit on the front wheel would have sent the front fender into the camera.\nSo instead I installed the front camera just on the left side of my faring as you can see in the photos. I installed the rear camera under my tail light. Installation is made simple with plug and play wiring and mounts that use very strong adhesive sticky tape. You wire the black power line into the negative battery terminal and the red positive line into one of your accessory fuses. That way the system boots up automatically whenever you activate the ignition and shuts down when you take out the key so it doesn’t drain your battery.\nThe system ran flawlessly for the entire time I used it and the video quality was top notch. The full HD video was clear and colorful, even at night, and I captured several fun rides using the handlebar “record” button. There is also a second button on the controller to activate the Wi-Fi system of the Thinkware M1 so you can easily download clips to your phone using their app. The system records two video files, one for each camera.\nIn automatic mode, the system records video in one-minute increments while you are riding. If you run out of memory while you are recording, the M1 system automatically deletes the oldest clips, just like a regular dash camera in a car. Since the under-seat control module is GPS linked and also has Wi-Fi, it can record speed data and the specific time and location of the video. That can be a good thing or maybe a bad thing, depending on how you’re riding and who wants to see the video. You do get the option to not include that metadata via the app.\nPerhaps the best feature of the system is the electronic image stabilization. Past videos that I shot with cameras mounted on my motorcycles have been plagued with vibration, but the Thinkware M1 system really smoothed the video out and made my runs through the hills fun to watch. It also has a camera leveling assist feature that helps with initial setup.\nThe Thinkware M1 will work with more than just motorcycles, of course. This would also work well on off-road vehicles including pickup trucks, side-by-side’s, snowmobiles and other vehicles that might get very dirty or be used in adverse conditions. The camera modules, while large, are pretty bomb-proof (and completely waterproof) and got caught in the rain a few times with no ill effects. I never had to worry about the Thinkware M1 system performing under pressure, and the video always looked great. If the camera module size isn’t an issue for your vehicle, I’d recommend the Thinkware M1 system for recording your adventures – or shenanigans.", "label": "Yes"}
+{"text": "Olive Garden Garlic & Herb Italian Seasoning Olive Garden Garlic & Herb Italian Seasoning Are you looking to add a burst of flavor to your dishes? Look no further than Olive Gar...查看全文\nUpgrade Your Vehicle with the APDTY 746628 Timing Cover Kit\nIs your vehicle in need of a timing cover kit? Look no further than the APDTY 746628 Timing Cover Kit, complete with crankshaft seal and timing cover gasket. This high-quality kit is designed to provide a perfect fit and reliable performance, ensuring that your vehicle’s timing system is in top condition.\nWhen you choose the APDTY 746628 Timing Cover Kit, you can expect the following key features:\n- Includes crankshaft seal for complete installation\n- Precision-engineered timing cover gasket\n- Durable construction for long-lasting performance\n- Direct replacement for a proper fit every time\n- Designed to meet or exceed OEM specifications\nThe APDTY 746628 Timing Cover Kit is designed for easy installation, making it a great choice for professional mechanics and DIY enthusiasts alike. With its precise fit and high-quality construction, you can trust that this kit will provide reliable performance and a hassle-free installation process.\nQ: Is this timing cover kit compatible with my vehicle?\nA: The APDTY 746628 Timing Cover Kit is designed to fit a wide range of vehicle makes and models. Please refer to the product specifications to ensure compatibility with your vehicle.\nQ: Does this kit come with installation instructions?\nA: Yes, the kit includes detailed installation instructions to guide you through the process.\nQ: Is the crankshaft seal included in the kit?\nA: Yes, the kit comes complete with a crankshaft seal for a comprehensive installation.\nUpgrade Your Vehicle Today\nDon’t let a worn-out timing cover compromise your vehicle’s performance. Upgrade to the APDTY 746628 Timing Cover Kit and enjoy the peace of mind that comes with reliable, long-lasting performance. With its precision engineering and durable construction, this kit is the perfect solution for your timing system needs.\nBatteryTrader庐 Battery Pack Compatible with FirstPower FP1220 12v SLA BatteryTrader庐 Battery Pack Compatible with FirstPower FP1220 12v SLA Are you in need of a reliable and d...查看全文\nDelphi Glass Mega Mini Circle Jewelry Casting Mold - 15 Circles Create Stunning Jewelry with Delphi Glass Mega Mini Circle Jewelry Casting Mold Are you looking to take your je...查看全文\nAJC Battery FirstPower FP6120 Sealed Lead Acid Battery AJC Battery FirstPower FP6120 Sealed Lead Acid Battery Are you in need of a dependable and durable power source for your e...查看全文", "label": "Yes"}
+{"text": "How do you put transmission fluid in a 2000 Lincoln ls\nget down under your car! I guess they were so confident in their transmission that they decided to eliminate the filler tube and dipstick, there's a plug that you undue and when you fill it to the proper level through that hole- the fluid trickles out the hole. I guess they don't want you to periodically check it,\nPictures were location\nSearch Lincoln LS Questions\nAre you a UK consumer? CarGurus now has a discussion forum in the UK.\nLincoln LS Experts", "label": "Yes"}
+{"text": "Car rental in the economy class in Chisinau and Moldova\nWe offer affordable car rentals in the Economy class at our showroom in Chisinau, available for both one-day rentals and longer periods of time. Our managers will select a car for you based on specific plans, and additional services will be provided for the entire rental period.\nWe recommend you consult the «Frequently asked questions» section, before renting a car. You can also find out details and rental conditions from our operators.\nOwning a personal vehicle in a bustling city is considered more of a necessity than a luxury. Despite this, acquiring a private car is often unjustified. In many situations, the most rational and financially reasonable choice is a temporary rental car in Moldova, specifically from the Economy category, which is highly in demand among:\n- -Visitors to Chisinau\n- Small businesses and large organizations without their own vehicle fleet\n- Drivers whose vehicles are under repair or technically unfit\n- Individuals and legal entities in need of an affordable occasional car rental\nCar rentals in the Economy class in Moldova are tailored to the requirements and financial capabilities of every customer. The rental price for a single cari is quite accessible, starting from 25 euros per day, and the cost decreases proportionally with the length of the rental period. You have the option to rent an Economy class car in Chisinau at an affordable price without a driver, with a necessary insurance deposit, as well as other convenient rental options with a driver. Moreover, special terms of the contract are provided to you, including support in emergencies and unexpected situations.\nOur showroom always has economically priced rental cars available in Moldova, offering models such as: Volkswagen Polo, Renault Megane, Nissan Qashqai, Renault Kadjar, Skoda Fabia, Renault Captur, Toyota Auris Hybrid, Toyota C-HR;\n- Skoda Fabia – a hatchback with front-wheel drive, equipped with air conditioning, car stereo, seating for five, and fabric interior.\n- Renault Taliosman – a black sedan with front-wheel drive, automatic transmission, seating for five, onboard computer, audio system, heated front seats, and car air conditioning.\n- Toyota Auris Hybrid – a white hatchback, automatic transmission, restyling, includes air conditioning, audio system, fabric interior, hybrid engine.\n- Volkswagen Polo is available for affordable car rental – a white and black five-seater sedan with automatic transmission, tinted windows, spacious interior, and heated front seats covered with leather.\n- Renault Megane – sedan and hatchback models, equipped with a music audio system, air conditioning, comfortable five-seat interior upholstered in trendy fabric, leather seat covers.\nComprehensive information and detailed specifications, data, and equipment details for each car are provided in the summary card on the company's website. Car rentals in Chisinau are affordable for you, and we are confident you will be satisfied. The service price ranges from 50 euros for a period of 2 to 5 days, 45 euros for 6 - 10 days, 40 euros for 11 - 16 days, 35 euros for 17 - 23 days, and 25 euros for 24 days or more.\nThis recommendation is rational and financially sensible, as it contributes to the saving of your financial resources. For businessmen and organizational leaders, it aids in financial and budgetary calculations. Even for long-term rentals, you won't have to pay more and rent a car at an unreasonable price.\nHow to rent a car inexpensively\nThe \"Luxcar\" showroom offers affordable car rentals in Moldova. You can individually reserve this service by filling out the information in the special form on the website - a request form in the form of a questionnaire. This procedure will take no more than five minutes, and you don't even need to leave the building, whether it's an airport, hotel, or apartment.\nDuring the questionnaire, provide personal information, driver's license details, accurate passport information, and contact details. Following the submission of the message, a company representative will call within a short time for verification, after which you can promptly come and pick up the reserved car. For inquiries and consultation, call the specified phone number, where an employee will provide helpful advice and address any requests.\nCar rental rules and conditions\nCar rentals at our showroom can be ordered cheaply and with a small deposit, designed for customer comfort.\n- Moldovan citizen or foreign state passport.\n- Driver's license of a specific category.\n- Additional documents - ID card, bank card, military ID, etc.\nFilling out the application will take only 10-15 minutes.\nPayment methods and payment systems\nThe rental fee for the car can be paid using any suitable method:\n- Cash at the office premises\n- Bank cards\n- Bank transfers\n- Electronic payments\nWelcome to our salon. We invite you to feel the maximum of the facilities and absolute comfort offered by the \"Luxcar.md\" company, when you rent a car for long term period in Chisinau.\nCar rental stations\nWhat our clients say about us?\nA fost prima dată când am închiriat de la LUXCAR.MD și am fost foarte mulțumiți de întreaga experiență. Prețul dvs. a fost mai mic decât alte companii. Experiența noastră de închiriere a fost bună de la început până la sfârșit, așa că vom reveni în viitor.\nI love the service from LUXCAR.MD, however the vehicle was not of the standard of cleanliness I would expect and am accustomed to.\nПрофессиональные сотрудники, которые знают, что делать. После долгого дня в путешествии, общение с дружелюбными и вежливыми людьми имеет большое значение.", "label": "Yes"}
+{"text": "High Pressure Hydraulic Hose Assely Of Hoyite Manufacturer 3/4 Inch Sae 100r1 , Find Complete Details about High Pressure Hydraulic Hose Assely Of Hoyite Manufacturer 3/4 Inch Sae 100r1,Hydraulic Hose Assely,3/4 Hydraulic Hose Assely,High Pressure Assely from Rubber Hoses Supplier or Manufacturer-Tianjin Hoyite Rubber Products Co., Ltd.\nChina Air/Water Hose alog of Medium Pressure Air Compressor Textile Braided Air Hose, High Pressure Textile Braid Air Rubber Hose provided by China manufacturer - Qingdao Rising Rubber Co., Ltd., page1. Hydraulic Hose, Fitting, Industrial Hose\nEFG6K hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids. Superior flex impulse performance: Tested to 1,000,000 impulse cycles at 50% of SAE 100R15 bend radii\nGoodyou Elastomer is a professioanl manufacturer of rubber radiator coolant hoses,heater hose SAE J30. Custom Auto Air Intake Hose Auto Fuel Injection Hoses Rubber gasket seal of automobile automotive wiring harness sleeve automotive rubber plugs\nGiraffe Retractable Air-Hose-Reel with 3/8 in. x 50 Ft Hybrid Air Hose,Auto Rewind Pneumatic Hose Reel,300PSI Heavy Duty Steel-Reel by Giraffe Tools $79.99 $ 79. 99 FREE Shipping on eligible orders 4.3 out of 5 stars 348\nAlibaba offers 388 Air Brake Hose Suppliers, and Air Brake Hose Manufacturers, Distributors, Factories, Companies. There are 65 OEM, 30 ODM, 42 Self Patent. Find high quality Air Brake Hose …\nSr15 Sae 100r15 Hydraulic Hose Get Best Quote Def Transfer Hose Get Best Quote Poly V Belt Get Best Quote Hose Cutting Tool Get Best Quote Flexshield Marine Fuel Hose Sae J1527 A1 15\nSearching for your parts in the Dayco part e-alog is easy. Simply select the type of part you are looking for along with the year/make/model of your vehicle. Dayco understands the needs of today’s hydraulic users and offers a complete range of hydraulic hose and\nAir Hose Water Hose Fuel Hose SD Hose ConcreteA/C Hose Silicone Hose SAE J30 R6 SAE J20 R3devoted in Rubber industry since the year 1990 Products, Wiring Harness Rubber Grommets, Air Intake Hoses SAE J30 R6 Fuel and Oil Hose – NBRGasketsAir Intake Hoses How to Visit Us Visit Shida\nShore Auto Rubber is a reputed Dealer and Supplier of all types of hoses from Pune, India. We are also a leading Manufacturer and Exporter of Hoses to customers throughout the world. Contact us at +91-2135 612570 to explore a huge range of hoses at best price\nShore Auto Rubber is a reputed Dealer and Supplier of Flexible Convoluted Hoses (Smooth Bore) from Pune, India. Contact us to buy Flexible Convoluted Hoses at best price in India. High performance. Exceptional “positive” and “negative” Pressure-resistance.\n2020/8/22· Buy Hydraulic Hose Hydraulic Hose Extremely High Pressure 16EFG6KXLL EFG6K Spiral Wire Hose - SAE 100R15 - GAT 70737 online from NAPA Auto Parts Stores. Get deals on automotive parts, truck parts and more.\n2018/8/1· A mandrel-built, EPDM rubber, radiator hose manufactured to DIN 73411 specifiions with with single ply textile braid reinforcement. Suitable appliions include radiator hoses, coolant / heater hoses, water & air hoses.\nFor example, a coolant hose made with Silicone meeting SAE J20 is given a shelf life of 20 years, whereas those made with chloroprene rubber meeting SAE J20 are given a shelf life of 8 years. Silicone hose has been a breakthrough in the automotive market, a perfect solution for radiator hoses and turbocharger hoses as well as oil pan and rocker cover gaskets.\nRubber Hose and Fittings Parker Hose Products Division offers a comprehensive selection of rubber hoses in low, medium, high and ultra high pressures. They are available in a wide variety of inner tube, reinforcement and cover coinations to meet specific\nWhere oil, oil mist, fuel and or certain chemicals may be present in turbo-charger and other air or exhaust gas systems, it is necessary to use a fluorosilicone liner in a silicone hose. Leyland Hose & Silicone use only 100% pure material, guaranteeing the best\nsae j2888 cost for 75 feet of steam rated flex hose sae j2888 cost for 75 feet of steam rated flex hose Hydraulic Leak-Free Fittings & Adapters . Novaflex® Industrial Hose. Complete line of air, chemical, petroleum, food grade, material handling and mining hoses\nCompare PAT E85 Rubber Hose - 10m, AN-5, Push Lock, RWH-400-05-10M SPO3564517 Select another one or two products to compare. You can compare up to three products.\nReliable hose jacket suppliers on Automotive Rubber Hoses 20141018-Find More Chassis Components Information about Auto parts 3/8 inch 20 meters length sae j30 r9 fuel hose,High Quality hose jacket,China hose SAEJ30R6 8mm Quality Rubber Car NBR Fuel\nYear Range Make Model Notes 1988-1991 Mercury Topaz Intake Manifold To Heater To confirm that this part fits your vehicle, enter your vehicle''s Year, Make, Model, Trim and Engine in the eBay Compatibility Table. Many of the parts we sell at Sixity Auto Direct\n2014/12/5· SAE ratings displayed on the hose should be 30R6 or 30R7. Neoprene fuel line is available in 1/8-inch through 5/8-inch sizes on bulk rolls, with additional 3-foot sections of large 1-1/2-inch through 2-1/4-inch sizes available for gas filler neck appliions.\nNbr [ Car Rubber Hose] Auto Engine Parts Car Rubber Air Intake Hose US $0.01-$2.00 / Piece 1000 Pieces (Min. Order) 2 YRS Jiaxing Reebok Automation Equipment Co., Ltd. Contact Supplier ··· …\ncover. It meets the requirements of SAE J20 R4 & R3 Class D1 and D2 specifiion and temperature resistance from -40ºC to 135ºC in coolant appliion. Air Duct Hose & Corrugated Hoses Air Duct Hose is used for under hood appliion and low pressure\nHigh Quality SAE 30r10 Fuel Hose, View sae 30r10 fuel hose, High Quality SAE 30r10 Fuel Hose,, Liaoning, China (Mainland), XFY, 1/4 to 8.Source from Shenyang Xinfeiyu Rubber Products Co., Ltd. on Alibaba Automobiles Fuel System Parts Sae 30 R10 Fuel", "label": "Yes"}
+{"text": "Operating a Car With A Manual Transmission\nA vehicle geared up with a manual transmission is often known as an automobile with a standard transmission. Not all people do understand how to drive with this type of transmission, nevertheless, car specialists suggest that when you do understand how to drive an automobile with a standard transmission, you would have the ability to discover to drive with an automatic transmission quickly. For those who do now understand how to drive a standard transmission, these specialists suggest that you ought to practice well.\nIf you take a look at the floorboard of your car, you would in fact see 3 pedals. From the delegated the right, these are the clutch, the brake, and the gas pedals in that order. Then, you ought to study the simple diagram on the top of the gearshift. You will see where the equipments are from there. Then, press down the clutch pedal and then move the gearshift into neutral. Start your car now.\nAlways keep the clutch pedal down as you put the car into first equipment by moving the gearshift to the leading left position. Then, use the foot brake and launch the parking brake. When you are ready to start moving, launch the foot brake. Then, begin to launch the clutch pedal gradually and when you start to hear or feel the engine starting to slow down, gradually press down on the gas pedal as you continue to launch the clutch. Anticipate your car to start moving.\nThen start speeding up until your car has reached around 3,000 rpm. And when you have actually reached that point, take your foot off the gas pedal and start pushing down on the clutch pedal. Pull the gearshift straight down through neutral to 2nd equipment and make sure that you pull the gearshift down until it can not go any even more. Then gradually launch the clutch pedal gently while concurrently pushing down gently on the gas pedal. Repeat the whole shifting procedure each time you get 3000 rpm while driving.\nDownshift by launching the gas pedal of your vehicle each time you in fact want to decrease your speed. Simply press down on the clutch and move the gearshift through neutral into the next-lower equipment. Once you get to the lower equipment, launch the clutch gradually and brake.", "label": "Yes"}
+{"text": "Words and Photos by Jeff Smith\nSchematic by Eric Rosendahl\nPerformance car guys are all about making good cars better. The average person thinks anything from the factory is automatically the best it can be, but real car people know new technology usually means improvement.\nA case study can be made with Ford and Mopar electronic ignition boxes from the ’70s. Honest Ford guys will admit that the Duraspark system has not lived up to its name, and replacement boxes are even less reliable. While original factory Mopar ignition boxes are good, the design for both the Ford and Mopar boxes suffers from an often overlooked, yet crucial design consideration.\nThe typical response on many forums to questions about these factory ignitions is the simplistic: “Just stick an MSD on it!” While that’s one solution, this skips over a fundamental approach to hot rodding — using good factory parts for a performance application.\nBefore we get into the details of how easy it is to adapt an HEI module to a Ford or Mopar magnetic distributor, we have to put this whole brand loyalty thing on the table. We can already hear the Mopar guys screaming, “Install a GM part on my Mopar — over my dead body!” For those who share that sentiment, save the trouble of addressing those poison emails to this author; this story is clearly not for you. But for the rest of the performance world who is open-minded enough to learn something new and to whom performance efficiency is more important than blind brand loyalty, please follow along.\nFirst, let’s address the weakness in the Ford and Mopar ignition systems. If we look closely at a wiring schematic of either system, both include either a resistor wire (Ford) or a ballast resistor (Mopar) that limits the voltage to the positive side of the coil. This is done to limit the amount of voltage fed to the coil to prevent it from overheating at low engine speeds.\nThe main reason for the resistor is because the original coils used with these ignitions were the oil-filled canister design with high internal resistance. The resistor circuit can often be the cause of a loss of ignition performance if, after decades of use, the resistance in the circuit increases, even further reducing the voltage fed to the coil. Bone stock, these systems delivered around 6 to7 volts to the positive side of the coil. Less voltage in means less power delivered to the spark plugs.\nWhen GM designed the high energy ignition (HEI), engineers combined the electronic module with a completely new design coil called an E-core or laminated core coil. The E-core cools the windings more efficiently because the coils are exposed to the air. This allows the coil designer to reduce the coil’s internal resistance. Old-school oil-filled coils typically measure 1.0 to 1.5 ohms of primary circuit resistance. E-core coils operate with as little at 0.30 ohms. With less resistance, the coils can accept a higher feed voltage and generate more secondary spark energy and higher spark plug gap voltage, creating a more powerful ignition system.\nThe HEI module is designed to supply the E-core coil with the full-system voltage of generally 14.0 to 14.5 volts. The Ford or Mopar electronic boxes are limited with either a resistor wire or large ballast resistor that limits the voltage to the primary side of the coil to around 7.0 to 7.5 volts. It should be obvious which system will perform more efficiently.\nNow that we have some actual facts to support this concept, it might become clear why the HEI module would be the equivalent of bolting in a high-performance ignition system on even a stock Mopar Slant 6. This is not new technology; several ignition companies offer HEI-style distributors for Ford and Mopar engine applications. While there’s nothing wrong with this approach, the conversion requires replacing the original distributor. But if you have a Ford or Mopar magnetic pickup distributor, you already have the correct distributor for a conversion.\nBut first, we need to know a little bit more about magnetic pickups. The process is pretty simple. The distributor shaft is equipped with eight (for a V-8 application) pole pieces or lugs that rotate with the shaft. The pickup contains a magnet that creates a tiny signal every time a lug passes across the pickup. This system essentially replaces the old points system with a more reliable switching mechanism. Every time the pole piece triggers the magnetic pickup, it sends a signal to fire the coil then eventually finds its way to the spark plug.\nSo, now that you have a grasp on the technology, let’s look at how to adapt it to a typical electronic-style distributor. The early Ford DuraSpark I and II and Mopar electronic distributors employ a magnetic pickup much like the GM HEI. The only critical information you need is to determine which wire on the magnetic pickup is the trigger wire and which is the ground.\nFor the early Ford two-wire distributors, the orange wire is the signal wire (+) that connects to the “W” terminal on the HEI module, while the brown wire is ground (-) that connects to the HEI “G” terminal. Later, DuraSpark versions came with three wires, with the third black wire as an additional ground. In this three-wire version, orange is the signal wire (+), while the violet or purple is ground (-). Mopar distributors use a black wire for the ground side (-), while the orange wire is the signal (+) connection. It’s that simple.\nWe’ve created a schematic that reveals just how simple the wiring is for an HEI module. In this illustration, we show a third wire exiting the distributor, like the later Ford versions. The colors coming from the distributor will also change based on the original manufacturer, but otherwise, the information doesn’t change. The “W” terminal on the left side of the HEI module is the signal connection, while the “G” terminal is the ground.\nOn the power side of the module, the “B” terminal always connects to the switched power or battery (+) of the coil, while the “C” terminal goes to the negative (-) side of the coil. With those four simple connections, plus adding a ground between the module, mounting base, and the engine and battery, will produce a functioning ignition system.\nWe mounted our HEI module on a 1/8-inch thick aluminum plate and added a wiring terminal strip just for grins, but this could be easily eliminated. We also found a cool, affordable aluminum bracket offered by Deisgned2drive.com that mounts the HEI module underneath the Mopar distributor.\nTo add a little more fun to this idea, consider that the magnetic pickup used in these Ford and Mopar distributors is the same style pickup employed in MSD distributors. So, this makes it really easy to convert an existing Ford or Mopar distributor to use a FAST, MSD, Pertronix, or any other company’s capacitive discharge (CD) style ignition system. In fact, MSD makes a slick wiring adapter to convert your distributor to the small, two-pin MSD connector. Then, even with a CD ignition in the car, you can also keep that small aluminum HEI module plate as a backup. That way if the MSD box fails, it would only require a few simple wiring connections to hook up the HEI module.\nHopefully, we’ve given you some ideas on how to upgrade a Ford or Mopar ignition to something a little more powerful at an extremely low cost. Sometimes, good ideas can also turn out to be the least expensive.\n|Accel 4-pin HEI module||35361||Summit Racing||$45.14|\n|Performance Dist. 4-pin module||000222||Summit Racing||$55.00|\n|Mallory 4-pin HEI module||699||Summit Racing||$109.50|\n|Proform 4-pin HEI module||669446||Summit Racing||$22.97|\n|Pertronix race module, rev limiter||D72000||Summit Racing||$73.97|\n|Pertronix 4-pin street module||D2000||Summit Racing||$45.97|\n|Summit 4-pin HEI module||850100||Summit Racing||$39.97|\n|Standard Motor 4-pin module||KS301||RockAuto||$32.97|\n|Delphi 4-pin module||DS10071||RockAuto||$18.58|\n|Mopar dist. mount bracket||———||Designed2drive.com||$21.50|\n|MSD pigtail||8861||Summit Racing||$8.27|\n|Thermal conductive paste, 1oz.||107-0001||WalMart||$3.96|\n|Thermal conductive paste||SL203||Auto Zone||$2.49|\nSources: Designed2drive.com; Holley Performance Products, (Accel), holley.com; Performance Distributors, performancedistributors.com; Pertronix, pertronix.com; RockAuto; rockauto.com", "label": "Yes"}
+{"text": "The Race can reveal the likely look of the Gen3 Evo Formula E car that will replace the current first iteration of the design in 2025.\nBased on information seen and received over the last three months, the design shown in our mock-up features several notable changes including the likelihood of the front powertrain becoming ‘in drive mode', or four-wheel drive.\nThese plans are yet to be completely decided but data gathered from an all-manufacturer test held in Mallorca last November is believed to be pushing the FIA and Formula E into using the new active set-up for at least qualifying and the attack mode phases of E-Prixs next year.\nWhile that will be the most fundamental change, other areas of the Gen3 car are also set to be modified.\nThis will include the majority of the upper bodywork, sidepods, damper cover and engine cover being new, while there will also be a new spec of Hankook rubber.\nOther changes are set to include a rejigged front-wing assembly.\nThis area of the car came in for much criticism from teams and drivers during the first Gen3 season of 2023 due to its brittleness compared to the sturdier Gen2 design.\nAccidents and near-accidents related to the front wing punctuated the 2023 season, the most serious of these being Abt Cupra driver Nico Mueller’s huge Portland crash - when his front wing was dislodged and got stuck under his wheels while at full-speed.\nSeveral times last season wing mounts failed after brief contact between cars, causing several engineers in the Formula E paddock to raise the issue at technical meetings.\nA more robust mounting for the front wings with the addition of tethers or blockers that prevent it going under the car and unloading the front wheels has been looked at for the Gen3 Evo era. The solution appears to be a mainplane on the new front-wing assembly, as detailed in The Race’s illustration above.\nNo details of delivery dates of the new kits have been discussed yet, although testing of the new-look cars is likely to take place in either September or October with the traditional week-long promoter's test at Valencia.\nTHE RACE SAYS\nThe importance of the Gen3 Evo design should not be underestimated. It is centrally important from a momentum point of view for Formula E ahead of its crucial Gen4 era in 2026 - and in the eyes of the promoter, Formula E Holdings, it's fundamental to the series attracting new fans for its fourth epoch.\nThe tribulations of the genesis of the Gen3 were painful and damaging for both the FIA and Formula E. The smorgasbord of issues and poor execution of the project laid bare serious issues that had to be addressed, and both commercially and in reputation terms Formula E had to pivot to effect repairs to its standing in motorsport.\nDespite the problems, the quality of the racing was largely unaffected and indeed in some cases it actually improved. Yet, the number of eyeballs on the action didn't really follow suit.\nThe initial Gen3 cars were undercooked. They weren’t 5-6s quicker than Gen2 as mooted, they couldn’t withstand contact as well as Gen2, and they were majorly unpopular with the manufacturers, teams and drivers.\nWhile the cars performed well on track there were countless knock-on problems including spares shortages and LED lights on the cars not working. So, the next iteration has to be tidier and also provide progression in laptimes.\nThe bridge that the Gen3 Evo will represent to Gen4 will also be crucial in the fundamental perception of whether all-electric racing cars can provide a genuine ‘wow’ factor that many feel is missing in the present cars.\nSpeaking to The Race last month, Formula E’s sporting and technical advisor Dieter Gass said that the motivation and intention for the Gen3 Evo was to “improve the spectacle” but that it didn’t need to be a radical change.\n“We want to keep it where it is because I think we’ve had some quite spectacular races this year with the Gen3,” he continued.\n“If you manage to keep that up you will be very good already. That’s exactly the target that we follow.”\nGass added that Formula E wants to “develop the spectacle that you get from the pure pace of the cars, not only from the fighting and the position changes and everything”.\nThis will include using the front powertrain kit, which is supplied by American EV tech specialist Atieva, to visually enhance the speed of the cars during certain periods of the race, including the start.\n“That [front powertrain usage] is going to be limited, obviously,” said Gass.\n“The planning for the time being is the start, most likely in the attack mode and qualifying. Really the elements at the moment where you can see and use the pace of the car.”", "label": "Yes"}
+{"text": "With many motorists in the UK often choosing to own a convertible over a hard-top car, the Vauxhall Astra TwinTop is among the prettiest on the market, according to one writer.\nJason Dawe states in a review of the vehicle for the Times that the fact that the Astra has a three-part folding metal roof instead of the more common two-piece is a reason for this.\nMeanwhile, motorists can either drop their top or keep the rain out at the push of a button, while with the roof down some 440 litres of luggage space is available to be filled.\nA choice of three petrol engines or a diesel offering may also appeal to prospective buyers, with Mr Dawe recommending that the 1.8-litre petrol is possibly the best buy.\nThis is because the 1.6-litre petrol struggles with its \"kerb weight\", while the 2.0-litre offering is too quick for a vehicle meant for a \"sunny Sunday jaunt\".\nOverall, Mr Dawe highlights that the Astra TwinTop is \"balanced and good to drive\", while being an inexpensive introduction into the world of convertible motoring.\nMotorists interested in the vehicle will also have the choice of ten colours including Iceberg, Royal Blue and Power Red.", "label": "Yes"}
+{"text": "Velocitization is an unfamiliar term for most people, but it happens all the time and can be extremely dangerous. Simply put, velocitization is the tendency for drivers in Georgia and around the country to operate vehicles at increased speed without being aware of the acceleration. Unfortunately, if you have ever driven a vehicle, you have likely been guilty of velocitization.\nWhat causes velocitization?\nThere are many reasons why velocitization happens. If you are driving a route that you commonly travel, the familiarity could make it easier for you to drive faster and not notice it. Most roads are smoother, wider and easier to drive on than ever, and new technology can make it seem like your car is traveling at 55 mph when you are actually driving 65 mph.\nOperating a vehicle when you are tired or stressed can also make it easier for you to unknowingly drive faster. Fatigue can cause you to zone out and not pay attention to your speed, and stress can bring about distracted driving.\nAccording to the National Highway Traffic Safety Administration, speeding has played a part in one-third of all vehicle fatalities for the last two decades. In addition to increased speeds, velocitization can cause you to become unaware of traffic signs and signals, which could cause an accident.\nFortunately, there are steps you can take to make sure you don’t become a victim of velocitization and endanger your own life and those around you. It is important to:\n- Make sure you get enough rest before you drive to help you stay alert and oriented.\n- Be mindful while you are driving and periodically check your speedometer.\n- Avoid driving when you are overly upset or emotional.\nIf you were injured in a motor vehicle accident where the other driver was speeding, your life could change dramatically. You could be facing mounting medical bills, lost wages from work and new physical limitations.\nConsulting an experienced personal injury attorney about protecting your rights as an accident victim might make all the difference in your future. An attorney may provide guidance to help you get the financial compensation you deserve.", "label": "Yes"}
+{"text": "The Armada Early Bronco IFS Chassis. Fabricated by top tier Trophy Truck fabricators, this Early Ford Bronco replacement chassis allows customers to utilize modern drivetrain under a classic vehicle.\nThe chassis accepts IFS components from a Gen2 Ford Bronco, giving superior handling and off road performance. The rear suspension consists of a 4 link trackrod system. The coilover and geometry setup give the Early Bronco unparalleled handling and performance.\nMore details coming soon. Contact us with any questions.", "label": "Yes"}
+{"text": "Armed with a push button start, backup camera, Bluetooth, braking assist, hill start assist, stability control, traction control, anti-lock brakes, dual airbags, and side air bag system, you won't be able to get enough of this 2018 Jeep Compass Latitude. It comes with a 2.4 liter 4 Cylinder engine. Don't skimp on safety. Rest easy with a 4 out of 5 star crash test rating. Complete with a dazzling blue exterior and a black interior, this vehicle is in high demand. Do more than just drive Bluetooth capability provides wireless access for all your electronic devices. View this beauty and our entire inventory today! Call for more details.\n10585 West Sam Houston Parkway South, Houston\nHouston, Texas 77099\nBrowse through the vast selection of vehicles that have recently been added to our inventory.", "label": "Yes"}
+{"text": "INSTALLATION PRICES. Chrome Delete: from $ 899. 3M Window Tint: from $ 629. Caliper Paint: from: $ 549. Powder Wheels: from: $649. 3M Clear Bra: from $849. Call us for specific Model Pricing and options at our sales extension at 949-988-075099.\nReviews on Chrome Delete in Orange County, CA - Dependable Guys, Essence Motorsports , MOTIV Auto Styling, OC Tint Shop, City Wraps, Templar Wraps, Dynamic Auto Customs , 8BallWraps, Rhino Films & Detailing.\nReviews on Chrome Delete in San Bernardino, CA - BSMNT Customs, Today Wraps, Exclusive Designs, Wrap Legacy, CreARTive Wraps, IE Detailing and Tinting , Inland Wraps, 1daywraps.com, Live Life Customized , Vaia Design.\nChrome Delete Vinyl Wrap - 3M, Avery Dennison & KPMF. Chrome delete vinyl wrap is available in 2, 3, or 4-inch widths. Choose between the Gloss, Matte, or Satin Black finishes adding style to your vehicle. manufactured specifically for vehicle applications to provide dimensional stability and durability without the need for any overlaminates.\nWelcome to C&C Car Wraps! Located 3800 N Shepherd Drive, Houston, Texas 77018 by servicing the surrounding areas. Feel free to give us a call today to learn more about our services and how to get started. Top-rated vehicle wrap services available for you at great prices. Protect your paint today!.\nhow to catch a cheating wife cell phone\nHide or Remove all the chrome from your vehicle with Mum Sports chrome delete protection in Fremont and San Francisco Bay Area. Our efficient service takes only just a couple of hours, so schedule your appointment today by calling us at (510) 657-3224.\nlas vegas roundup 2021\nxcg design corp\nAMR MERCEDES-BENZ E63S AVERY SATIN RED CHROME | CARBON WRAP | CERAMIC PRO. ... NEW PRODUCT: 2015-2017 WRX/STi | Headlight Amber Delete Overlay DIY. Mercedes Vinyl Wrap | Mercedes Benz C43 AMG. 3M Dry Carbon Fiber Interior Wrap. Project WRX Bugeye Wagon Underway - Avery Dennison. Why Choose Us \"turn your vehicle into a POWERFUL advertising.\n832-789-6581. Welcome to Houston car wraps, if you are looking to wrap your personal vehicle or wrap your business vehicle we can make it happen for you. We also offer window tinting in all percentages book an appointment today to make your car vision come to life. Have an idea for a vehicle color change, chrome delete, or adding a decal to you.\nChrome Delete provides sleek customization for any vehicle. Our technicians expertly eliminate all chrome on the vehicle resulting in a highly sleek and stealth look. We use only the best 3M 1080 vinyl. You can even opt for a custom color, hand-painted delete for the ultimate custom look.\nRegistered. Joined Oct 2, 2021. 1 Posts. #18 · Oct 2, 2021. Davisl279 said: That front grill with all that chrome was driving me crazy, with this quarantine i had time to swap today. looks so much better. View attachment 68446 View attachment 68448 View attachment 68449. I did a chrome delete on my white Malibu I love it.\nCHROME DELETE What is a Chrome Delete? A chrome delete is a cost-effective way to blackout chrome that is stock on a car. This process is usually done with vinyl but can use paint for parts such as emblems. Most cars come stock with chrome trim, emblems, and other small parts which can look very unstylish.\nHave a look at some of our most recent work at Atlantic Wraps. Serving the Charlotte area with custom car wraps, paint protection, color change and commercial wraps.\nChrome Delete. It has become common to \"remove\" the chrome accents on vehicles. This can be done without affecting the value of your car with our vinyl wrap services. The best part is you get to choose the color and finish to enhance the look of your vehicle and make it look the way you desire.\nvictrola antique crank record player", "label": "Yes"}
+{"text": "Hmmm, but does the gas inside a tire rotate with the tire?But it's \"rotational weight\", so every gram counts :wink:\nWhat he said. It should also be noted that nitrogen compresses less than air, but that is minor. Add that that air is 78% nitrogen. In theory you could add a moisture filter/removal component to your air compressor and get the same result.The reason for nitrogen is that it is dry. Condensation/vaporization of water from air can cause fluctuations in pressure. On a car that will more likely operate under a wider array of temperatures and will potentially be going 70+ mph it's of a much larger (though still not large enough for me) concern.", "label": "Yes"}
+{"text": "Choose Bandag Near 61473\nNeed fleet support or new retread tires near 61473? Your nearby Bandag dealer has what you need. Bandag's roots date back to 1957, and since then, the brand has been the leader in retread tires, product advice, and services. Today, the Bandag network includes 2,300+ dealers and trusted service points across North America including Firestone, Bridgestone, and Dayton tire dealers. The Bandag dealer network is second to none, and our commitment to quality and innovation is solid. Whether you manage a fleet of 18-wheelers, a district of school buses or you're an owner-operator, the closest Bandag dealer near 61473 can help make sure your drivers and their trucks feel confident when they hit the pavement. Retread Tire Finder\nRetread & Recap Tires from Bandag Near 61473\nBandag retreads are used by some of the world's largest fleets. Retread tires are a responsible choice. They’re better for the environment and better for your budget. A retreaded truck tire saves enough energy to power 800 homes for an hour  and can help reduce operating costs by half or more. \nYou might be curious how Bandag retreads are different than other tire retreading shops near 61473. It has to do with decades of experience and an unwavering dedication to quality. Whatever your application, our tread designs can match it. They're tested in real-world situations. Because you don’t work in a lab and you don’t drive in a vacuum. You drive on and off the road and your Bandag retreads need to go there, too. Our next-generation rubber is uniquely formulated to tolerate hard wear. And our inventive designs reduce rolling resistance to increase fuel efficiency.\nTogether, our replacement tire developments and warranty help lower the overall cost of ownership and support drive confidence, trip after trip. Visit your Bandag dealer near 61473 to learn more about how retread tires can be better for your budget, your business, and the environment.\nCall Bandag for Fleet Services Near 61473\nBandag is dedicated to developing smarter tire solutions and services for fleets in Roseville. Bandag dealers near 61473 offer all kinds of fleet services, including wheel and rim refinishing, mobile and in-house alignments, 24-hr roadside assistance, yard checks, tire inspections, air up programs, and more. But we know maintaining a whole fleet is about more than meeting tire needs. That's why we aim to limit the challenges of fleet management with inventory tracking, tire program reporting and analysis, single source billing, and driver awareness training. Our training programs are designed to increase efficiency and safety in your tire program. Work with a Bandag dealer near 61473 for fleet assistance today. Bandag really can make a difference for you. We'll zero in on your tire program. You focus on your business.\n From Duke: A retreaded truck tire =2901 MJ/tire energy savings is enough to power 800 homes for 1 hour (3.62 MJ per home per hour). 15 M retreads/year - 43.5N MJ - enough to power all the homes in the US for 4 days (based on 2016 US Census of 125.82M households in the US)  Many of the largest fleets in the US recognized the value of retreads back in the 1970s and have been saving over $1MM annually ever since. The primary benefit of retreaded tires is the reduced cost, less than 1.5 cents per mile, versus the industry average of around 4.5 cents per mile. A quality casing can be retreaded as long as it meets strict inspection requirements.", "label": "Yes"}
+{"text": "A car logo is a symbol or text that represents the identity of a particular type of car. Today, the car market is flooded with different brands and models. Car logos will help you to distinguish one brand from another. Logos serve as unique visual marks of identity of a company. They help companies gain product recognition in the world market. In general, logos reflect the individuality of the company. Logos should be simple and thoughtfully designed to appeal the target customer. As cars are speed lovers? vehicles, their logo should have a strong virile look.\nCommonly, three types of car logos are used – symbol logo, text logo, and combination logo. In symbol logos, special designs or symbols are used to represent the brand. Popular car companies like Citroen, Ferrari, Mercedes, Mitsubishi, Peugeot, Renault, Porsche, Subaru, and Koenigsegg have symbols for their logos. These symbols have ingrained deep into people?s mind all over the world. In text logos, the initials or the names of the companies are written in a particular style. Text logos are used by many famous car companies such as Fiat, Mazda, Toyota, Ford, Volkswagen, and Volvo. Combination logo is a blend of symbols and texts. They place symbols and text in juxtaposition to make memorable logos. Popular car brands like Alfa Romeo, Audi, Maserati, Skoda, Lamborghini, Panoz, Cizeta, Lotus, Rover, and BMW make effective use of symbol-text combinations.\nCar logos come in different shapes, sizes and colors. Car logo stickers are used as fundraisers for clubs, schools, or teams. Today, car logos appear even on t-shirts, caps, bags and other accessories. A gift item printed with car logos can make a great gift to any speed lover.", "label": "Yes"}
+{"text": "Grand Prix Greats – Azerbaijan GP greatest F1 moments\nAzerbaijan is a relative newcomer to the Formula 1 World Championship but has produced some of the wildest moments in recent Grand Prix history. Here is that story, from the archives of Motorsport Images.\nAbout this video\n|Posted||Jun 8, 2022|", "label": "Yes"}
+{"text": "|Four New Winners On RacinDirt.com Open Night|\n|Written by Austin|\n|Sunday, 09 September 2012 22:20|\nWinston, Mo (9-8-12) Open night allowed new drivers to run under their weekly track rules. And four new faces visited Victory Lane after fighting off some hard charging regulars.\nA-Mod Heats courtesy of RacinDirt.com\nThe Modified class always brings out some very fast cars when the rules are opened up. It was no different this time. Dennis Elliot had command of the feature the entire race. Aaron Marrant tried to stay on his back bumper but seemed to lose about a car length every lap. Steven Glenn looked like he might be able to run them down early but as the race went on he developed a push. Which was the problem for Jim Cameron as he had a push right in the center of the corner most of the feature. Elliott, Marrant, Glenn and Cameron would finish first thru fourth in that order. The first time appearance for Buddy Benedict placed him fifth. Tyler Grooms moved the Jeff Stotts owned SportMod car up to the Modified class and picked up the hard charger award by gaining seven spots in the feature.\n|Last Updated on Thursday, 13 September 2012 14:35|", "label": "Yes"}
+{"text": "The Ford Pinto is a subcompact car that was manufactured and marketed by Ford Motor Company in North America from 1971 until 1980. The Pinto was the first subcompact vehicle produced by Ford in North America.\nThe Pinto was marketed in three body styles throughout its production: a two-door fastback sedan with a trunk, a three-door hatchback, and a two-door station wagon. Mercury offered rebadged versions of the Pinto as the Mercury Bobcat from 1975 until 1980 (1974–1980 in Canada). Over three million Pintos were produced over its ten-year production run, outproducing the combined totals of its domestic rivals, the Chevrolet Vega and the AMC Gremlin. The Pinto and Mercury Bobcat were produced at Edison Assembly in Edison, New Jersey, St. Thomas Assembly in Southwold, Ontario, and San Jose Assembly in Milpitas, California.\nSince the 1970s, the safety reputation of the Pinto has generated controversy. Its fuel-tank design attracted both media and government scrutiny after several deadly fires occurred when the tanks ruptured in rear-end collisions. A subsequent analysis of the overall safety of the Pinto suggested it was comparable to other 1970s subcompact cars. The safety issues surrounding the Pinto and the subsequent response by Ford have been cited widely as business ethics and tort reform case studies.\nAmerican automakers had first countered imports such as the Volkswagen Beetle with compact cars including the Ford Falcon, Ford Maverick, Chevrolet Corvair and Plymouth Valiant, although these cars featured six-cylinder engines and comprised a larger vehicle class. As the popularity of smaller Japanese imports Toyota Corolla and Datsun 510 increased throughout the 1960s, Ford North America responded by introducing the Cortina from Ford of Europe as a captive import. American automakers introduced their subcompacts, led by the AMC Gremlin that arrived six months before the Pinto, and the Chevrolet Vega, introduced the day before the Pinto.\nNamed for the pony, the Pinto was introduced on September 11, 1970. It was a completely new platform, but utilized a powertrain from the European-specification Escort. Ford Chairman Henry Ford II himself purchased a 1971 Runabout (hatchback) to use as one of his personal cars.\nInitial planning for the Pinto began in the summer of 1967, was recommended by Ford's Product Planning Committee in December 1968, and was approved by Ford's board of directors in January 1969. Ford President Lee Iacocca wanted a 1971 model that weighed under 2,000 lb (907 kg) and that would be priced at less than US$2,000 ($16,617 in 2023 dollars). The Pinto product development, from conception through delivery, was completed in 25 months when the automotive industry average was 43 months, the shortest production planning schedule in automotive history at the time. Some development processes usually conducted sequentially were conducted in parallel. Machine tooling overlapped with product development, which froze the basic design. Decisions that threatened the schedule were discouraged; the attitude of Ford management was to develop the Pinto as quickly as possible. Iacocca ordered a rush project to build the car, and the Pinto became known internally as \"Lee's car\". The Pinto's bodywork was styled by Robert Eidschun.\nOffered with an inline-four engine and bucket seats the Pinto's mechanical design was conventional, with unibody construction, a longitudinally mounted engine in front driving the rear wheels through either a manual or automatic transmission and live axle rear end. The suspension was by unequal-length control arms with front coil springs while the live rear axle was mounted on leaf springs. The rack and pinion steering optionally had power assist, as did the brakes.\nOn September 11, 1970, Ford introduced the Pinto under the tagline The Little Carefree Car.\nAfter structural design on alternate body styles encountered obstacles, Ford offered the Pinto solely as a two-door sedan, with entry-level models priced at $1,850, undercutting GM's Chevrolet Vega and directly targeting imported models – which included such new competitors as the Mazda 1200 in 1971, the Subaru DL in 1972, and the Honda Civic in 1973.\nThe Pinto had sold over 100,000 units by January 1971, and 352,402 for the entire 1971 production run; 1974 saw the most Pintos produced in a single model year, with 544,209 units.\nThe Ford Pinto went on sale on September 11, 1970, in one body style, a fastback sedan with an enclosed trunk. A hatchback became available on February 20, 1971, debuting at the Chicago Auto Show. In 1971, the Pinto brochure came with a paper cutout Pinto that one could fold to make a 3D model. Marketed as the Runabout, the hatchback went on sale five days later, priced at $2,062 ($15,513 in 2023 dollars ). The hatch itself featured exposed chrome hinges for the liftgate and five decorative chrome strips, sprung scissor struts to assist in opening the hatch, a rear window approximately as large as the sedan's, and a fold-down seat – a feature which became simultaneously an option on the sedan. The hatchback model matched the sedan in all other dimensions and offered 38.1 cubic feet (1.08 m3) of cargo space with its seat folded. By 1972, Ford redesigned the hatch itself, with the glass portion of the hatch enlarged to almost the entire size of the hatch itself, ultimately to be supplemented for 1977–1980 with an optional rear hatch that was entirely glass.\nOn October 30, 1970, less than two months after introduction, 26,000 Pintos were recalled to address a possible problem with the accelerator sticking on once engaged at more than halfway. On March 29, 1971, Ford recalled all 220,000 Pintos manufactured before March 19, 1971, to address a problem with fuel vapors in the engine air filter possibly igniting by a backfire through the carburetor.\nOn February 24, 1972, the Pinto station wagon debuted with an overall length of 172.7 in (4,390 mm) and 60.5 cubic feet (1.71 m3) of cargo volume. The first 2-door Ford station wagon since the 1965 Falcon, the Pinto wagon was equipped with flip-open rear quarter windows. Along with front disc brakes, the 2.0L engine was standard equipment. A Pinto Squire wagon featured simulated woodgrain trim similar to the full-size Country Squire.\nAlso in February 1972, the Sprint Decor Group was made available for the Pinto for one model year only. The Sprint Decor Group included white exterior paint with blue accent paint and red pin-striping, a blacked-out grille, color-keyed wheels with bright trim rings and hubcaps, whitewall tires, and color-keyed dual sport mirrors. The interior included red, white, and blue cloth and vinyl bucket seats, full carpeting as well as a deluxe steering wheel. The Sprint Decor Group was offered simultaneously on the Maverick and Mustang.\nFor the 1973 model year, more appearance options were offered. There was a new Sport Accent Group offered in white exterior paint with a choice of two-tone orange or avocado accent paint, matching vinyl roof, and a deluxe interior with wood-tone trim. There was also a new Luxury Decor Group with bright exterior dress-up mouldings, black bumper rub strips, and a deluxe interior with wood-tone trim. New slotted forged aluminum wheels were offered.\nIn 1974, to meet federal regulations, 5 mph bumpers were added to both the front and rear. Unlike most 1970s cars, the addition of larger bumpers to the Pinto did not necessitate major changes to the bodywork. While the underpowered Kent engine was dropped, the optional OHC engine was expanded to 2.3 L; in various forms, this engine powered a variety of Ford vehicles for 23 years. In 1974, Mercury began selling a rebadged version of the Pinto called Bobcat as a Canada-only model. 544,209 units sold; 1974 became the most popular model year for the Pinto. Steel-belted tires, an anti-theft alarm system, and metallic glow paint were optional.\nIn 1975, in a move to better compete with the AMC Gremlin, Ford introduced the 2.8 L V6; while far less powerful than the Gremlin's standard 232 cu in (3.8 L) I6, the V6 gave the Pinto a feature unavailable in the Chevrolet Vega. Sales of the Mercury Bobcat were expanded to Lincoln-Mercury dealers in the United States; it was sold as a hatchback and station wagon.\nAs a minor styling update for 1976, the Pinto received the egg-crate grille and chrome headlamp bezels recycled from the Canada-only 1974 Mercury Bobcat. For one model year only, two new option packages were offered. One was the sporty new Stallion appearance package with blackout trim and black two-tone accent paint offered in red, yellow, silver, and white body colors. This option package was shared with the Mustang II and Maverick. The other new option package was the Runabout Squire which featured wood-grain vinyl bodysides like the Squire wagon. The interior received the optional Luxury Decor Group which featured new low-back vinyl or plaid cloth bucket seats with matching door trim. A new basic low-cost model was introduced known as the Pinto Pony with less standard equipment and cheaper interior trim. A wagon version of the Pony would later arrive for the 1979 model year.\nFor the 1977 model year, the Pinto received its first significant styling updates with slanted back urethane headlamp buckets, parking lamps, and grille. The tail lamps were revised except for the wagons. Runabouts offered an optional all-glass rear hatch for the first time. Pinto wagons were given a new option package. Dubbed the Pinto Cruising Wagon, it was the sedan delivery version of the Pinto styled to resemble a small conversion van, complete with round side panel \"bubble windows\" and a choice of optional vinyl graphics.\nFord offered new sporty appearance packages similar to those found on the Chevrolet Vega and AMC Gremlin but were strictly cosmetic upgrades that added nothing to vehicle performance.\nIn 1978, the Pinto was no longer the smallest Ford sold in the U.S., as the company introduced the Fiesta. Nearly two feet shorter than the Pinto, the German-designed Fiesta was the first front-wheel-drive car sold by Ford in the United States.\nFor the 1979 model year, the Pinto saw its last significant styling update. Shedding its original Maverick-like styling, the Pinto took on the look of the modern Fairmont with rectangular headlamps, inboard vertical parking lamps, and a taller slanted back grille. Except for the wagons, the tail lamps were revised. The interior was updated with a new rectangular instrument cluster and a modified dash-pad for vehicles without the optional sports instrumentation. The variety of sports appearance packages was revised, some with new graphics.\nThe Pinto ESS (European Sports Sedan) was one such new model for 1979 which was available in 2-door Sedan and 3-door Runabout bodies. It featured many blackout items incl. roof drip mouldings, lower back panel, rocker panels, glass surrounds and door frame trims (incl. black tape along lower side window ledges), dual sport mirrors, premium body-side mouldings, and hinges for the standard all-glass third door. The grille and headlamp surrounds were charcoal, the fenders had ESS identification and the styled steel wheels had black wheel trim rings. The Sports Package (front stabilizer bar, sport steering wheel, full instrumentation, optional axle ratio on 2.3L manual cars) was standard.\nJuly 1980 marked the end of the Pinto's production run to make way for its replacement, the front-wheel drive Ford Escort. For the 1980 model year, the V6 engine was discontinued, leaving the 2.3 L as the sole engine.\nExcept for 1980, the Pinto was available with a choice of two engines. For the first five years of production, only four-cylinder inline engines were offered. Ford changed the power ratings almost every year.\nIn 1974, the 2.3 litres (140 cu in) OHC I4 engine was introduced. This engine was updated and modified several times, allowing it to remain in production into 1997. Among other Ford vehicles, a turbocharged version of this engine later powered the performance-based Thunderbird Turbo Coupe, Mustang SVO, and the European-built Merkur XR4Ti.\nInitial Pinto deliveries in the early years used the English 1,600 cc (98 cu in) and German 2,000 cc (120 cu in) engines tuned for performance (see below). The 2,000 cc (120 cu in) engine used a two-barrel carburetor where just one bore was bigger than that used on the Maverick. With the low weight (not much above 2,000 lb (910 kg)) and the SOHC engine it accelerated from 0 to 60 mph (0 to 97 km/h) in 10.8 seconds. With the advent of emission control requirements, Ford moved from European-sourced to domestically sourced engines, using new or modified designs. New safety legislation affected bumpers and other parts, adding to the weight of the car and reducing performance. Revised SAE standards in 1972 dropped the Pinto's 1.6 L (98 cu in) engine to 54 bhp (40 kW) – and the 2.0 L (120 cu in) engine to 86 hp (64 kW).\nLincoln-Mercury dealers marketed a rebadged variant of the Pinto as the Mercury Bobcat, beginning with the 1974 model year in Canada. It was produced in all of the same body styles and styled with a unique egg-crate grille and chrome headlamp bezels (which were later recycled for a styling update to the 1976 Pinto). The rear featured modified double-width tail lamps for the sedan and Runabout models.\nFor 1975, the Bobcat was added to the U.S. market and sold initially in upgraded levels of trim as the Runabout hatchback and Villager wagon. Lesser-trimmed versions were offered in subsequent model years. The Bobcat was never offered as a two-door sedan with an enclosed trunk for the U.S. market. The Bobcat was offered as a two-door sedan for a limited number of years in Canada. All Bobcats were restyled with a domed hood and a taller vertical bar grille styled to look like senior Mercury models. Throughout all the model years, Bobcats offered various appearance options that were similar to the Pinto's.\nFor 1979, the Bobcat received a major restyling shared with the Pinto featuring a slanted back front end with rectangular headlamps and inboard vertical parking lamps but distinguished with a large vertical bar grille. Except for the wagons, the tail lamps were revised. The base instrument cluster received a new rectangular design with a modified dash pad.\nProduction of the Bobcat ended in 1980 to make way for its replacement, the Mercury Lynx. In total, 224,026 Bobcats were produced from 1975 until 1980.\nUpon release, the Pinto was received with both positive and negative reviews. Consumer Reports listed the Pinto as one of the \"runners up\" in a test of six subcompact cars -- better in overall quality than the AMC Gremlin and about on a par with the Volkswagen Beetle, but inferior to the \"three winners\" -- Datsun 510, Toyota Corona and Chevrolet Vega. Road & Track faulted the suspension and standard drum brakes, calling the latter a \"serious deficiency\", but praised the proven 1.6 L Kent engine, adapted from European Fords. Super Stock Magazine found the fit and finish to be \"superior\" and were impressed with the car overall. Car and Driver found the Pinto, when equipped with the larger 2.0L engine and front disc brakes, to be a nimble and powerful commuter car with good visibility and sports-car feel. A review of the 1974 Pinto with an automatic transmission by Car and Driver was not as favorable noting significant decreases in mileage and acceleration.\nThe later controversy surrounding the Pinto resulted in a negative legacy associated with the car and Ford's handling of the controversies. In 2004, Forbes included the Pinto among its fourteen Worst Cars of All Time, noting that its problems helped create an opening in the US market for small cars from Japan. Time magazine included the Pinto on lists of The Fifty Worst Cars of All Time. Time, Popular Mechanics, and NBC News have included the car in lists of most significant recalls.\nThe safety of the design of the Pinto's fuel system led to critical incidents and subsequently resulted in a recall, lawsuits, criminal prosecution, and public controversy. The events surrounding the controversy have been described as a \"landmark narrative\". The Ford Pinto has been cited and debated in numerous business ethics as well as tort reform case studies.\nThe placement of the car's fuel tank was the result of both conservative industry practice of the time as well as the uncertain regulatory environment during the development and early sales periods of the car. Ford was accused of knowing the car had an unsafe tank placement and then forgoing design changes based on an internal cost-benefit analysis. Two landmark legal cases, Grimshaw v. Ford Motor Co. and Indiana v. Ford Motor Co., resulted from fatal accidents involving Pintos.\nScholarly work published in the decades after the Pinto's release has examined the cases and offered summations of the general understanding of the Pinto and the controversy regarding the car's safety performance and risk of fire. These works reviewed misunderstandings related to the actual number of fire-related deaths related to the fuel system design, \"wild and unsupported claims asserted in Pinto Madness and elsewhere\", the facts of the related legal cases, Grimshaw vs Ford Motor Company and State of Indiana vs Ford Motor Company, the applicable safety standards at the time of design, and the nature of the NHTSA investigations and subsequent vehicle recalls. One described the Grimshaw case as \"mythical\" due to several significant factual misconceptions and their effect on the public's understanding.\nThe design of the Pinto fuel system was complicated by the uncertain regulatory environment during the development period. The first federal standard for automotive fuel system safety, passed in 1967, known as Section 301 in the Federal Motor Vehicle Safety Standards, initially only considered front impacts. In January 1969, 18 months into the Pinto's development cycle, the NHTSA proposed expanding the standard to cover rear-end collisions. The proposed standard was based on a 20 mph moving-barrier rear impact test. Ford publicly announced it supported the standard. In August 1970, the month the Pinto went into production, the NHTSA changed the proposal to a more stringent 20 mph fixed-barrier standard which car companies were to meet in 18 months. The fixed-barrier standard was seen by the auto industry as a significant increase in test severity. At the same time, the NHTSA announced a long-term goal of setting a 30-mph fixed-barrier standard. Due to the confusion related to the various proposed standards and an expectation that the NHTSA would not select the more stringent 30 mph fixed-barrier standard, Ford elected to voluntarily meet the 20 mph moving-barrier standard for all cars by 1973. Ford and other automobile manufacturers objected to the more stringent fuel system safety standard and filed objections during the required comment periods of the proposed regulations.\nThe Pinto's design positioned its fuel tank between the solid live rear axle and the rear bumper, a standard practice in US subcompact cars at the time. The Pinto's vulnerability to fuel leakage and fire in a rear-end collision was exacerbated by reduced rear \"crush space\", a lack of structural reinforcement in the rear, and an \"essentially ornamental\" rear bumper (though similar to other manufacturers).\nAs part of a response to the NHTSA's proposed regulations, crash testing conducted in 1970 with modified Ford Mavericks demonstrated vulnerability at fairly low crash speeds. Design changes were made, but post-launch tests showed similar results. These tests were conducted to develop crash testing standards rather than specifically investigating fuel system integrity. Though Ford engineers were not pleased with the car's performance, no reports of the time indicate particular concern. The Pinto was tested by rival American Motors (AMC) where in addition to crash-testing, engineers specialized in fuel-system performance because of the potential deadly fires in severe collisions.\nFord also tested several different vehicle modifications that could improve rear impact performance. However, the engineer's occupational caution and aversion to \"unproven\" solutions, as well as a view that the crash test results were inconclusive, resulted in the use of a conventional fuel tank design and placement. The use of an above-the-axle tank location was considered safer by some, but not all, at Ford. This placement was not a viable option for the hatchback and station wagon body styles.\nBeginning in 1973, field reports of Ford Pintos consumed by fire after low-speed rear-end collisions were received by Ford's recall coordinator office. Based on standard procedures used to evaluate field reports, Ford's internal recall evaluation group twice reviewed the field data and found no actionable issue.\nIn 1973, Ford's Environmental and Safety Engineering division developed a cost–benefit analysis entitled Fatalities Associated with Crash Induced Fuel Leakage and Fires for submission to the NHTSA in support of Ford's objection to proposed stronger fuel system regulation. The document has become known as the Grush/Saunby Report, named for its authors, and as the \"Pinto Memo\". Cost-benefit analysis was one tool used in the evaluation of safety design decisions accepted by the industry and the NHTSA. The analysis compared the cost of repairs to the societal costs for injuries and deaths related to fires in cases of vehicle rollovers for all cars sold in the US by all manufacturers. The values assigned to serious burn injuries and loss of life were based on values calculated by NHTSA in 1972. In the memo Ford estimated the cost of fuel system modifications to reduce fire risks in rollover events to be $11 per car across 12.5 million cars and light trucks (all manufacturers), for a total of $137 million. The design changes were estimated to save 180 burn deaths and 180 serious injuries per year, a benefit to society of $49.5 million.\nIn August 1977, having been provided with a copy of the memo by Grimshaw v. Ford Motor Co. plaintiffs before trial, Mark Dowie's investigative article \"Pinto Madness\", published in Mother Jones magazine, emphasized the emotional aspects of the Grush/Saunby Report and implied Ford was callously trading lives for profits. The Mother Jones article also erroneously claimed that somewhere between 500 and 900 persons had been killed in fires attributed to the Pinto's unique design features.\nThe public understanding of the cost-benefit analysis has contributed to the mythology of the Ford Pinto case. Time magazine said the memo was one of the automotive industry's \"most notorious paper trails\". A common misconception is that the document considered Ford's tort liability costs rather than the generalized cost to society and applied to the annual sales of all passenger cars, not just Ford vehicles. The general misunderstanding of the document, as presented by Mother Jones, gave it an operational significance it never had.\nIn April 1974, the Center for Auto Safety petitioned the National Highway Traffic Safety Administration (NHTSA) to recall Ford Pintos to address fuel system design defects after reports from attorneys of three deaths and four serious injuries in rear-end collisions at moderate speeds. The NHTSA found there was not enough evidence to warrant a defect investigation. In August 1977, Dowie's \"Pinto Madness\" article was published, leveling a series of accusations against Ford, the Pinto and the NHTSA. These included that Ford knew the Pinto was a \"firetrap\" and said that Ford did not implement design changes because the company's cost-benefit analysis document showed that paying out millions in damages in lawsuits was less expensive than the design changes. The day after the article's release consumer advocate Ralph Nader and the author of the Mother Jones article held a news conference in Washington DC on the alleged dangers of the Pinto's design. On the same day, Nader and the Center for Auto Safety re-submitted their petition to the NHTSA.\nFormer UCLA law professor Gary T. Schwartz in a Rutgers Law Review article said the NHTSA investigation of the Pinto was in response to consumer complaints and noted the Mother Jones article included a clip out \"coupon\" that readers could mail to the NHTSA. Lee and Ermann note that the Mother Jones labeling of the Pinto as a \"firetrap\" and accusations that the NHTSA was buckling to industry pressure as well as the public interest created by sensationalized news stories \"forced a second Pinto investigation and guaranteed that the NHTSA would be under the microscope for its duration.\"\nOn August 11, 1977, the day after the Nader and Mother Jones press conference, the NHTSA initiated an investigation. On May 8, 1978, the NHTSA informed Ford of their determination that the Pinto fuel system was defective. The NHTSA concluded:\n1971–1976 Ford Pintos have experienced moderate speed, rear-end collisions that have resulted in fuel tank damage, fuel leakage, and fire occurrences that have resulted in fatalities and non-fatal burn injuries ... The fuel tank design and structural characteristics of the 1975–1976 Mercury Bobcat which render it identical to contemporary Pinto vehicles, also render it subject to like consequences in rear-impact collisions.\nNHTSA scheduled a public hearing for June 1978, and NHTSA negotiated with Ford on the recall.\nLee and Ermann noted that NHTSA used a worst-case test to justify the recall of the Pinto, rather than the regular 1977 rear-impact crash test. A large and heavy car was used instead of a standard moving barrier. Weights were placed in the nose of the car to help it slide under the Pinto and maximize gas tank contact. The vehicle headlights were turned on to provide a possible ignition source. The fuel tank was completely filled with gasoline rather than partially filled with non-flammable Stoddard fluid as was the normal test procedure. In a later interview, the NHTSA engineer was asked why the NHTSA forced a Pinto recall for failing a 35 mph test given that most small cars of the time would not have passed. \"Just because your friends get away with shoplifting, doesn't mean you should get away with it too.\"\nThe National Highway Traffic Safety Administration (NHTSA) ultimately directed Ford to recall the Pinto. Initially, the NHTSA did not feel there was sufficient evidence to demand a recall due to incidents of fire. The NHTSA investigation found that 27 deaths were found to have occurred between 1970 and mid-1977 in rear-impact crashes that resulted in a fire. The NHTSA did not indicate if these impacts would have been survivable absent fire or if the impacts were more severe than even a state-of-the-art (for 1977) fuel system could have withstood. In their analysis of the social factors affecting the NHTSA's actions, Lee and Ermann note that 27 is the same number of deaths attributed to a Pinto transmission problem which contributed to collisions after the affected cars stalled. They also note that the NHTSA had two primary incentives in proving a defect existed in the Pinto's fuel system design. The administration was pressured by safety advocates (Center for Auto Safety) as well as the public response. It was also being forced into action due to how both the courts and executive branch were limiting the ability of the NHTSA to address systematic auto safety issues.\nThough Ford could have proceeded with the formal recall hearing, fearing additional damage to the company's public reputation the company agreed to a \"voluntary recall\" program. On June 9, 1978, days before the NHTSA was to issue Ford a formal recall order, Ford recalled 1.5 million Ford Pintos and Mercury Bobcats, the largest recall in automotive history at the time. The recall included sedans and hatchbacks, but not the station wagon. Ford disagreed with the NHTSA finding of a defect, and said the recall was to \"end public concern that has resulted from criticism of the fuel systems in these vehicles.\" The Ford recall placed a polyethylene shield between the tank and likely causes of puncture, lengthened the filler tube, and improved the tank filler seal in the event of a collision.\nApproximately 117 lawsuits were brought against Ford in connection with rear-end accidents in the Pinto. The two most significant cases were Grimshaw v. Ford Motor Company and State of Indiana v. Ford Motor Company.\nGrimshaw v. Ford Motor Co., decided in February 1978, is one of two important Pinto cases. A 1972 Pinto driven by Lily Gray stalled in the center lane of a California freeway. The car was struck from behind by a vehicle initially traveling at 50 mph and impacted at an estimated between 30 and 50 mph, resulting in a fuel tank fire. Gray died at the time of the impact. Richard Grimshaw, the thirteen-year-old passenger, was seriously burned. The plaintiff's bar collaborated with Mother Jones and The Center for Auto Safety to publicize damning information about Ford prior to trial. The jury awarded $127.8 million in total damages; $125 million in punitive damages and $2,841,000 in compensatory damages to passenger Richard Grimshaw and $665,000 in compensatory damages to the family of the deceased driver, Lily Gray. The jury award was said to be the largest ever in US product liability and personal injury cases. The jury award was the largest against an automaker at the time. The judge reduced the jury's punitive damages award to $3.5 million, which he later said was \"still larger than any other punitive damage award in the state by a factor of about five.\" Ford subsequently decided to settle related cases out of court.\nReaction to the Grimshaw case was mixed. According to the Los Angeles Times in 2010, the award \"signaled to the auto industry that it would be harshly sanctioned for ignoring known defects.\" The case has been held up as an example of the disconnection between the use of corporate risk analysis and the tendency of juries to be offended by such analyses. The case is also cited as an example of irrational punitive damage awards. While supporting the finding of liability, Schwartz notes that the punitive damage award is hard to justify.\nOn August 10, 1978, three teenage girls of the Ulrich family of Osceola, Indiana, were killed when the 1973 Pinto they were in was involved in a rear-end collision. The driver had stopped in the road to retrieve the car's gas cap which had been inadvertently left on the top of the car and subsequently fell onto the road. While stopped the Pinto was struck by a Chevrolet van. Ford sent the Ulrichs a recall notice for the Pinto in 1979. A grand jury indicted Ford on three counts of reckless homicide. Indiana v. Ford was a landmark in product liability law as the first time a corporation faced criminal charges for a defective product, and the first time a corporation was charged with homicide. If convicted, Ford faced a maximum fine of $30,000 under Indiana's 1978 reckless homicide statute. Ford's legal defense was vastly more ambitious than the effort mounted in the Grimshaw case. The effort was led by James F. Neal with a staff of 80 and a budget of about $1 million; the Elkhart County Prosecuting Attorney had a budget of about $20,000 and volunteer law professors and law students. A former head of the NHTSA, testifying on Ford's behalf, said the Pinto's design was no more or less safe than that of any other car in its class. In 1980 Ford was found not guilty. In 1980 a civil suit was settled for $7,500 to each plaintiff.\nAccording to Automotive News in 2003, the indictment was a low point in Ford's reputation. Some saw the suit as a landmark for taking a corporation to task for their actions while others saw the case as frivolous. In 2002, Malcolm Wheeler, a lawyer working with the Ford defense team, noted that the case was a poor application of criminal law. The case also impacted how Ford handled future product liability cases both legally and in the press.\nA Rutgers Law Review article by former UCLA law professor Gary T. Schwartz (see Section 7.3 NHTSA Investigation above), examined the fatality rates of the Pinto and several other small cars of the time. He noted that fires, and rear-end fires, in particular, are a very small portion of overall auto fatalities. At the time only 1% of automobile crashes would result in fire and only 4% of fatal accidents involved fire, and only 15% of fatal fire crashes are the result of rear-end collisions. When considering the overall safety of the Pinto, subcompact cars as a class had a generally higher fatality risk. Pintos represented 1.9% of all cars on the road in the 1975–76 period. During that time, the car represented 1.9% of all \"fatal accidents accompanied by some fire\". This implies the Pinto was average for all cars and slightly above average for its class. When all types of fatalities are considered, the Pinto was approximately even with the AMC Gremlin, Chevrolet Vega, and Datsun 510. It was significantly better than the Datsun 1200/210, Toyota Corolla, and VW Beetle. The safety record of the car in terms of fire was average or slightly below average for compacts, and all cars respectively. This was considered respectable for a subcompact car. Only when considering the narrow subset of a rear impact, fire fatalities for the car were somewhat worse than the average for subcompact cars. While acknowledging this is an important legal point, Schwartz rejected the portrayal of the car as a firetrap.\nWe are a leading provider of Engines and Transmissions. We have provided customers with an unbeatable Price,\nUnmatched Quality and excellent Customer Service for 20 years.\nWe use only top quality re-manufacturers to supply our clients with professionally re-manufactured Transmissions. All of our transmissions have factory backed warranties.\nAll of our engines and transmissions are rigorously tested and inspected prior to shipping. This allows us to warranty your engine to keep your vehicle on the road for years to come.\nWe provide access to Salvage yards and auto part retailers for automotive engine and transmissions .\nLooking For a Specialist\nPlease Contact Now\nLooking For a Specialist\nPlease Contact Now\nPAY SECURELY WITH", "label": "Yes"}
+{"text": "When your braking system just isn't Functioning appropriately, we offer braking services, such as braking diagnostics plus the fitting of brake pads or discs. In turn, you love assurance recognizing that your auto’s braking procedure will complete optimally below unique driving conditions.\nNo piece of car or truck-buying advice is a lot more generally overlooked than this: Have a mechanic inspect a used automobile before you buy it.\nI’ve been a customer for an quantity of a long time and worth your impression. JD encouraged me that my 98′ Jeep was on it’s past leg. fifth cylinder, other things. I should purchase an identical dimension vehicle and would really like assistance on new & used, that will be dependable and ideally final as long as the Jeep did.\nReserve your inspection on the internet whenever of the working day using an straightforward and secure checkout. Get inspected\nare fantastic repositories of automobile buying information and facts. If you look for a car or truck that piques your fascination, determine there are no big possible problems with it. The\nYou are able to guide an appointment with us for the next oil adjust and luxuriate in high quality service accomplished by experts. Our group of dynamic and experienced mechanics makes a speciality of the upkeep of different makes.\nYour report will breakdown Every classification intimately that has a entire rationalization of The rationale your vehicle has lost market place value. This report will provide check out here you with the Resource (proof) you might want to collect precisely what is owed for you! 3rd party Appraisal (Complete Reduction)\nChoose a time that actually works for you personally with PAL® inspections out there 7 days a week. E-book promptly\nRepairing a fault with no correct resources can translate to lousy workmanship, which can compromise protection and show high priced In the long term. Do-it-yourself mechanical responsibilities might be cumbersome and click time intensive. They involve adequate space to undertake the maintenance operate.\nis a great supply of car or truck record, getting info from insurance policy firms, shops, as well as other vendors. Also make sure you know your budget, together with the truthful price tag and full expense of ownership of the car. Use\nmaintains a summary of recalls and Complex Service Bulletins, which is able to inform you about issues with the motor vehicle. two. You discovered a car you like—how to proceed before Assembly With all the seller\nOur mechanics can carry out automotive diagnostics to check many portions of your vehicle. This aids us determine and correct difficulties. If an motor check light arrives on or you hear an odd noise, we could recognize the fault using advanced diagnostic gear.\nIf the vehicle was considered a complete reduction weblink from the Insurance coverage company and You're not pleased with their give, you have got the correct to get an independent certified appraisal to determine the particular money value of your vehicle.\nThe mechanics are offered 7 days every week from 7am to 9pm but The supply relies on how hectic the mechanics are. You are able to guide an appointment on-line by selecting your spot, motor vehicle, and also the pre-purchase inspection career. The availability on the mechanics will surface after you request a quotation.", "label": "Yes"}
+{"text": "I agree to receive text messages from Oryx Motors representatives and understand that no consent to texting is required for purchase of products or services.\nOPEN TODAY! 10AM TO 7PM\n2010 Lexus RX 450h Hybrid Navigation\n2013 Toyota 4Runner Limited V6 Navigation\n2014 Chevrolet Express 2500 Explorer Limited SE Co...\n2014 GMC Yukon XL Denali AWD Navigation TV/DVD\n2014 Toyota Tacoma TRD Double Cab V6 4X4\n2012 Chevrolet Suburban 2500 LT 6.0L NAV TV/DVD\n2009 GMC Yukon XL Denali AWD NAV TV/DVD\n2014 GMC Sierra 2500HD SLE Crew 6.6L Diesel 4X4\n2013 Subaru Outback Limited Navigation AWD\n2006 Dodge Ram 2500 SLT Mega Cab 5.9L Diesel 4X4\n2013 Chevrolet Silverado 3500HD Flatbed DRW Diesel...\n2010 Chevrolet Silverado 2500HD LT Ext Cab 4X4\n2016 Ram 1500 Laramie Crew EcoDiesel 4X4\n2011 Chevrolet Silverado 1500 LTZ Crew 5.3L 4X4\n2016 Ram 3500 Tradesman DRW Crew 6.7L Diesel 4X4\n2014 GMC Sierra 1500 SLT Crew Cab 5.3L 4X4 Loaded\n2016 GMC Yukon XL SLT NAV TV/DVD 4X4\n2015 Chevrolet Silverado 2500HD LTZ 6.6L Diesel 4X...\n2017 Ram 3500 Tradesman Crew DRW 6.7L Diesel 4X4\n2015 Chevrolet Silverado 2500HD LTZ Z71 Diesel 4X4\nYou can save multiple searches, so it's good to give some valid names to help you easily change filters.\nComplete the form below to check availability\nYou request has been sent successfully. We will contact you shortly. Thank you\nWe've got your request. Someone on our team will get back to you shortly.\nWe’ve got your request.\nSomeone on our team will get back to you shortly.", "label": "Yes"}
+{"text": "2016 GMC Canyon Diesel Engine Option\n2016 gmc canyon is called as best pick-up truck that offered to you for 2016. There are some auto manufactures that offer you pick-up truck but not all of them offer you best quality of pick-up truck. That is why you must be selective in choosing best pick-up for your need. Most people will look for powerful and better design of pick-up truck. Pick-up truck must be made with powerful engine system so you can carry all things and pass all roads in easy way. How about new GMC Canyon? GMC Canyon is offered as mid-size pick-up truck that will be made with better features and engine system. This pick-up truck will be made different with previous version and you must buy this pick-up truck. Before you buy it, it is good for you to check detail information about this car first.\nEngine System of 2016 gmc canyon\nAs it is said above, new 2016 gmc canyon will be made with better engine system. This new GMC canyon will be offered with Duramax diesel engine. There are some people who ask why GMC Canyon uses this diesel engine. You will get reasons of using this diesel engine when you continue reading this article. This car will use 2.5L with I-4 diesel engine as standard engine. By using this engine system, this car will be able to produce at least 193 HP and also 184 lb ft. You can also find other engine options such as 3.6L with V6 engine system. This engine system will help you to produce at least 302 HP and also 270 lb ft. Although it is clear that Duramax engine system will be added to new GMC Canyon, we still don’t know when the exact time of this car coming to the market. We still need to wait for the coming of this 2016 GMC Canyon.\nIncrease Fuel Economy and Power\nThere are some changes in design and also there will be some new features that will be added to this pick-up car. There are some reasons why finally GMC Canyon is made with diesel engine system. Diesel engine system is used in order to increase the fuel economy system and also increase the horsepower in the same time. When you drive this pick-up you can save more fuel and more money. You don’t need to worry although you use less fuel you still can produce bigger power with this car. Now, it is time for you to wait for the release date of this 2016 gmc canyon.", "label": "Yes"}
+{"text": "MANUAL CARS UNDER 5000\nUsed Manual Transmission Cars Under $5,000: 2,704 Cars\nSave $944 on Used Manual Transmission Cars Under $5,000. Search 2,704 listings to find the best deals. iSeeCars analyzes prices of 10 million used cars daily.\n27 Best Used Cars for Sale Under $5,000 in 2019\nAug 15, 2019The 27 Most Fun Used Cars You Can Buy for Under $5000. Prices are cheap, and for your money you get a fun, manual hot hatch with Honda reliability and massive aftermarket support.Author: Brian Silvestro\nUsed Cars Under $5,000 for Sale | TrueCar\nSearch over 21,378 used Cars priced under $5,000. TrueCar has over 1,075,404 listings nationwide, updated daily. Come find a great deal on used Cars in your area today!\nUsed Cars Under $5,000 for Sale (with Photos) - CARFAX\nFind the best used car under $5,000 near you. Every used car for sale comes with a free CARFAX Report. We have 18,409 used cars under $5,000 for sale that are reported accident free, 5,289 1-Owner cars, and 23,330 personal use cars.\n10 Best Used Cars Under $5,000 | Autobytel\nThere's a surprising variety out there when considering the best used cars under $5,000. On the one hand you have the usual cast of practical, fuel efficient suspects that will give you another hundre\n10 Sick Cars You Can Buy For Under $5,000 (And 10 To Avoid)\nAuthor: Tyler Kittle Jaguar X-Type – Avoid. Neither British nor luxury cars are frequently associated with longevity and Mitsubishi Lancer – Avoid. There were many Japanese performance cars that took the US by storm Chrysler Sebring Convertible – Avoid. Despite adding weight and reducing structural rigidity, Pontiac Grand Am – Avoid. If there was one big problem that Pontiac suffered from, it would be the See all full list on hotcars\nUsed Cars Under $5,000 in Chantilly, VA: 899 Cars from\nSave $914 on Used Cars Under $5,000 in Chantilly, VA. Search 899 listings to find the best deals. iSeeCars analyzes prices of 10 million used cars daily.\nUsed Cars for Sale Under $5,000 - Autotrader\nFind Used Cars for Sale. Find car prices, photos, and more. Locate car dealers and find your car at Autotrader!Engine: 4-Cylinder\n8 of the Best Used Cars under $5,000 | Trusted Choice\nOct 29, 20188 of the Best Used Cars You Can Find for under $5,000 in 2018. Remember: Pricing on these cars will vary according to the cars’ condition and mileage. That being said, here are 8 of the best cars you are likely to find for under $5,000, according to industry experts: 1. Toyota Camry, 2002-2006Where to Buy A Reliable Used Car For Under $5,000If you are able to pay for your car with cash, you may be better off purchasing from a private seller rather than a used car lot. This way, you can..What to Look For in A Used Car Under $5,000When you have found a car in your price range, the most important thing to do is research. You can read reviews about the reliability of the car an..What Are Some of The Best Used Cars You Can Find For Under $5,000?Of course, given the number of cheap, used cars available on the market, this list is far from complete, and pricing on these cars will vary accord..\nLeesburg, VA Cars for Sale Under $5,000 | Auto\nSearch new & used car listings under $5,000 dollars in Leesburg, VA. See hi-res pictures, prices and info on cars for sale in Leesburg, Virginia that are less than $5,000. Find your perfect car\nRelated searches for manual cars under 5000\nused manual cars under 5000manual transmission cars under 5000car under 5000 for salebest cars under $ 5000buy used cars under 5000one owner cars under 5000classic cars for under 5000good used cars under $ 5000", "label": "Yes"}
+{"text": "SAIC MOTOR Genuine China Oil Filter LPW100180\n- Morris Garages MG ZS\nBrand: SAIC MOTOR\nPart No.: LPW100180\nMade in: China\nQuantity per Pack: 1\n1x SAIC MOTOR Genuine China Oil Filter LPW100180\nNote: this genuine SAIC MOTOR part is provided exactly as shown in the pictures. Please verify that it will fit your vehicle from your car manual, or online, or from our support team.", "label": "Yes"}
+{"text": "Mazda tribute repair manual free download\nMazda tribute repair manual free download. Mazda Tribute GF Factory Service Manual ( to ) Factory service manual for the to series GF chassis Mazda Tribute. Covers all maintenance and diagnostic information, along with rebuild and repair guidelines for engine components, gearbox, differential, brakes, steering, suspension, body panels, electrical components and interior components. Mazda Tribute Workshop Repair & Service Manual [COMPLETE & INFORMATIVE for DIY REPAIR] ☆ ☆ ☆ ☆ ☆ Download Now Mazda Tribute Workshop Service Repair Manual (EN-DE-FR) (6,+ Pages, Searchable, Printable, Indexed, PDF) Download Now. • Mazda Tribute GF ( to ) [1 Manual Archived] Free PDF Mazda Factory Service Manuals & Repair Manual Downloads Download free Mazda factory service manuals by selecting the above model you require. All our Mazda repair manuals are free to download and provided in PDF file format.\nmazda tribute repair manual free download", "label": "Yes"}
+{"text": "Ford Motor Company is developing a range of small cars to succeed its Ka model in Europe, according to Bernard Mattes, deputy chairman of the auto giant’s German subsidiary Ford-Werke.\nHowever, the new marque will not hit the roads any time soon. Launched in 1996, the Ka, said Mattes, is “fresh” enough to stay on the market for now and will be produced until “at least 2004”.\nMattes added that he was satisfied with Ford’s performance in Europe. In the five months to May, Ford bucked the overall 4% year-on-year drop in car sales to 1.46 million by registering a 16% rise in unit sales to 126,000, an increase attributed to the youth of its model range.\nHowever, warned Mattes, Ford’s 2001 target of 300,000 European unit sales may still be jeopardised by the slowdown in the market.\nNews source: Handelsblatt (Germany)", "label": "Yes"}
+{"text": "HD: BMW 535d ECU 350 HP vs BMW M3 Coupe E46 SMGII\n5d-ecu-around-350-hp.html#post1656211 HD: BMW 535d ECU 350 HP vs BMW M3\nBMW M550d X Drive Road Test - /CHRIS HARRIS ON CARS\nBMW M550d X Drive road test.\nIt has more torque than the space shuttle and BMW claims it will do over\n40mpg. BMW also says it won't be selling the car in the UK or the US, the\nplaces that DRIVE is most commonly viewed. But when something has 3 turbos, you've got to go drive it at 155mph: no?\n2011 BMW 550i Gran Turismo xDrive Start Up, Exhaust, and In Depth Tour\nIn this video I give a full in depth tour of the 2011 BMW 550i Gran Turismo\nxDrive. I take viewers on a close look through the interior and exterior of\nthis vehicle while showing details, over viewing of features, and noting\nunique styling cues to the vehicle itself. I also show the engine and the\ndetails of it, start it up and see how it sounds under acceleration. A\nthorough tour/review of the 550i GT designed to give others a greater\noverall appreciation of the vehicle.\nThanks a lot to Hendrick BMW for allowing me to film this video! For more\ninfo on this vehicle as well as others visit www.hendrickbmw.com\nBMW 530d xDrive LCI Walkaround\nVisit my blog for more: http://guitigefilmpjes.blogspot.com\nWalkaround of a BMW 530d xDrive LCI M-Sport (F10 / MY2014) showing the\nexterior, interior and several technological features the car is equipped\nBMW Crash Compilation #1\nRate, Share and Subscribe !\nLike us on Facebook: http://www.facebook.com/topcrashes\nCar Crash Community: http://gplus.to/carcrashes\nFollow on Twitter: https://twitter.com/CarCrashWorld\nBMW 535D ECU vs Mercedes E420 CDI chiptune\nMercedes E420 CDI - 371hp (Kleemann KD-chip, benchmarked)\nBMW 535D - 420hp (V-tech ECU-software and Exhaust and more..., estimated numbers)\nMercedes has a \"KD\" chiptune from Kleemann and BMW has DPF delete/Exhaust and a custom V-tech ECU tune. The E420\nCDI had at this stage 371hp and the power of the 535D is estimated at\naround 420hp(Most powerful 35d there is??). I was late in the start in the\nfirst race but the bmw was yet the winner.\nBMW M5 Street Drift! Giorgi Tevzadze(NeedForDrive.com) & Eric Davidovich(Smotra.ru) by zaRRubin\nGiorgi Tevzadze - BMW M5(OOM-500) & White BMW 3-Series(V8, 4.4)\nGoga Toloraia - BMW M5(Red, TOL-600)\n1. Method Man - Release Yo' Delf (The Prodigy Mix)\n2. Shahmen - Mark (low bass)\n3. The Go! Team - Apollo Throwdown (Star Slinger Remix)\n4. Depth Charge - Sex, Sluts & Heaven (bordello mix)\n5. Swollen Members - Reclaim The Throne\n6. Delinquent Habits -- Return Of The Tres\n7. Shahmen - Van Gogh's Crows\n8. I Monster - Dayderam In Blue\nBMW X6M (900л.с.)Тест-драйв.Anton Avtoman.\nПочта для связи firstname.lastname@example.org\nhttps://vk.com/antonavtoman Добавляйтесь в друзья!)\nЕщё полноразмерные кроссоверы", "label": "Yes"}
+{"text": "Dorel Australia, the owner of Max-Cosi, has announced an immediate recall of its Maxi-Cosi A2 Euro Convertible car seat.\nVicRoads has just released a report reviewing cycling-related road rules and there’s been some gross misreporting in the daily newspapers. Let’s set the record straight.\nThere’s not much difference between on the limit and over it, as Swedish motoring publication Teknikens Värld demonstrated with this 2015 Nissan Pulsar.\nVery few people use voice recognition in their cars, but maybe they could save time, and improve safety. In fact, some people don’t even realise their car can do voice recognition. If there’s a little button like the one in the title image, usually on the steering wheel, then your\nTesla’s Model S electric sedan notches up over one billion miles. Electric-vehicle pioneer Telsa say their Model S (pictured) has covered over 1.6 billion kilometers, and of course that has to be expressed in equivalent terms of trips to the moon – 27, to be exact. Whether you like it\nThe all-new Lexus RC F GT Concept will compete at this weekend’s Pikes Peak International Hill Climb in the Time Attack category.\nThe 2,000,000th Land Rover, called ‘Defender 2,000,000’, has been built with a host of special features and will go up for auction in December with Bonhams.\nOne of our readers asked for car buying advice… He was after something with room for three costing less than $40k.\nHow come a light, powerful car is no faster than a heavier, weaker competitor? The Toyota 86 automatic weights 1278kg and has a motor good for 147kW. It does the 0-100 sprint in 7.6 seconds, which is the same time as the BMW 220i convertible (review here). But the BMW\nHolden will still offer a sports sedan with the Insignia VXR, even if it’s not a v8. The Insignia is an all-wheel-drive 2.8L sedan with a 239kW turbocharged engine good for 435Nm of torque via a six-speed automatic transmission. It is a European design, joining Astra and Cascada in Australia", "label": "Yes"}
+{"text": "Best 2012 Honda Ridgeline Floor Mats and Best Used Cars\nThe actual 2012 honda ridgeline floor mats comes with a V6 powerplant, and also reviewers said it gives abounding power. A five-speed (AT) automatic-transmission as well as Four Wheel Drive are usually standard. In line with the EPA, the actual 2012 honda ridgeline floor mats receives 15/21 miles per gallon city/highway, which happens to be identical with all the fuel economy estimations of similar 4WD small in size pickup truck trucks. The majority of evaluators mentioned the actual Honda Ridgeline has got a cosy, car-like experience and relatively nimble handling. The 2012 Ridgeline can tow line around 5,000 lbs, which happens to be below the ideal dragging total capacity coming from all other sleek and stylish trucks.\nTest out individuals wrote that the 2012 honda ridgeline floor mats’s vacation cabin consists of an excessive amount of tricky vinyl, but the majority located the structure basic along with practical, with numerous beneficial storage area regions with regard to smaller sized items. Evaluators said your five-seat Honda Ridgeline features spacious rear seating, which happens to be a silly go with in this class. Pundits treasured the particular effectiveness and also electricity supplied by the 2012 Ridgeline’s locking in-bed footwear and its particular tailgate that could be opened straight down or towards the side. Standard functions add a power-sliding raise eye-port, keyless admittance, along with a six-speaker sound recording system. Out there features feature an auxiliary enter, satellite television on pc radio stations, a strong up-graded audio system, dual-zone automated local weather regulate, a new power-adjustable person’s seats, leather upholstery, heated up top seating, an electric moonroof, any rearview photographic camera, Bluetooth along with navigation.\nThe actual 2012 Nissan Frontier can easily tow line approximately 6,500 weight, which will is perfect for the particular class. Testers said it has got nimble controlling with regard to a smaller truck, plus they appreciated rapid velocity supplied by it is offered V6 engine.\nReviewers stated the actual 2012 Toyota Tacoma features fantastic inner surface system quality. They also acknowledged the actual spacious raise chairs in Double Cab types as well as the Tacoma’s off-road dexterity if with possible TRD off-roading package.\nPictures gallery of Best 2012 Honda Ridgeline Floor Mats and Best Used Cars\nDISCLAIMER: This image is provided only for personal use. If you found any images copyrighted to yours, please contact us and we will remove it. We don't intend to display any copyright protected images.", "label": "Yes"}
+{"text": "Rubbish from this weekend's carnival is expected to generate 97,200 kWh of low carbon electricity\nAs revellers recover from the Bank Holiday weekend's Notting Hill Carnival rubbish from the street party is making its way to waste recovery sites across London to be recycled or used to generate green...\nPolestar lures younger drivers with subscription model for car ownership\nNew Autocharge service to allow electric vehicle drivers to pay for charging by simply plugging in their car\nCabinet decides to scrap Clean Energy Target recommended by country's chief scientist in favour of a plan for 'affordable, reliable power' - but will the move kill or empower renewables Down Under?\nIndustry Committee of MEPs overwhelmingly backs proposals for new long term energy efficiency goals and electric vehicle charging standards", "label": "Yes"}
+{"text": "Research New Subaru Baja 2020\nSpesification subaru baja 2020\nThe mesmerizing Research New Subaru Baja 2020 photograph below, is part of Subaru Baja 2021\nStyle article which is classed as within Review, 2020 subaru baja pickup truck, 2020 subaru baja release date, 2020 subaru baja specs, 2020 subaru baja turbo, new subaru baja 2020, subaru baja 2020, subaru baja 2020 for sale, subaru baja 2020 price, subaru baja pickup 2020, subaru baja truck 2020 and posted at April 30, 2020.\n12 The Subaru Baja 12 Pricing with Subaru Baja 12 – Car Review …\nSubaru Baja 2021\nStyle : Research New Subaru Baja 2020\nPeople airing bottomward a artery cutting face coverings Monday, April 6, 2021, in St. Louis. The Centers for Ache Control and Prevention now recommends cutting bolt face coverings in accessible settings afterwards contempo studies accept apparent a cogent allocation of the citizenry can address the coronavirus afterwards assuming any symptoms.\nST. LOUIS (KMOV.com) - Beneath is the latest on the appulse of the coronavirus in Missouri and the Metro East:\nHere is wanted notification on Review, 2020 subaru baja pickup truck, 2020 subaru baja release date, 2020 subaru baja specs, 2020 subaru baja turbo, new subaru baja 2020, subaru baja 2020, subaru baja 2020 for sale, subaru baja 2020 price, subaru baja pickup 2020, subaru baja truck 2020. We have the prime sources for Review, 2020 subaru baja pickup truck, 2020 subaru baja release date, 2020 subaru baja specs, 2020 subaru baja turbo, new subaru baja 2020, subaru baja 2020, subaru baja 2020 for sale, subaru baja 2020 price, subaru baja pickup 2020, subaru baja truck 2020. Check it out for yourself! You can discover Research New Subaru Baja 2020 guide and view the latest Subaru Baja 2021\n|Title||Research New Subaru Baja 2020|\n|Caption||Spesification subaru baja 2020|\n|Published Date||April 30, 2020|\n|Latest Updated Date||April 30, 2020|\nBack To Subaru Baja 2021 Style\n12 photos of the \"Subaru Baja 2021 Style\"\nRelated posts of \"Subaru Baja 2021 Style\"\nMore than 45,000 Toyota cartage accept been recalled over apropos a abnormal ammunition pump could access the accident of crashes, but potentially dodgy genitalia may not be able to be replaced for months.Concept and Review toyota prado 2021 model The ammunition pumps on accepted Toyota models such as the LandCruiser, Prado, Camry,...\nThe Wrangler and its 4-door sibling, the Wrangler Unlimited, appear in four trim levels for 2013, all with a 3.6L V6 engine. The agent makes 202 hp at 5200 rpm and 237 lb-ft of torque. All Wrangler models accept a 6-speed chiral manual as accepted equipment, while a 5-speed automated is optional.All Wrangler models additionally...\nThere's a new hot-hatch adaptation of the Toyota Yaris, an all-wheel-drive homologation appropriate with limited-slip differentials, a 268-hp turbocharged inline-three, and a carbon-fiber roof. Alleged the GR Yaris (for Gazoo Racing), it's about a artery adaptation of the Yaris assemblage car that competes in the FIA World Assemblage Championship. It's additionally the latest affiliate of...\nLexus Rx 350 F Sport 2021 New Review - lexus rx 350 f sport 2021 | Encouraged for you to our weblog, within this period We'll explain to you concerning keyword. And today, this can be the initial photograph: Release Date and Concept lexus rx 350 f sport 2021\nJust click download link in many Resolutions at the end of this sentence and you will be redirected on direct image file, and then you must right click on image and select \"Save image as\". 150 × 150 / 300 × 203 / 768 × 520 / 960 × 651 / 160 × 110 / 660 × 293 / 80 × 65 / 1241 × 841\nSee also related to Research New Subaru Baja 2020 images below\nIf you found any images copyrighted to yours, please contact us and we will remove it. We don't intend to display any copyright protected images.We hope you can find what you need here. We always effort to show a picture with HD resolution or at least with perfect images. Research New Subaru Baja 2020 can be beneficial inspiration for those who seek an image according specific categories; you can find it in this site. Finally all pictures we have been displayed in this site will inspire you all..", "label": "Yes"}
+{"text": "The average listing price on SpeedList for this year, make, and model is $113,405.\nThis vehicle has been on SpeedList for 91 days.\n6.2L 8 cyl\n3rd Row Seats AM/FM Stereo Adjustable Seats Adjustable Steering Air Bag(s) 3rd Row Seats AM/FM Stereo Adjustable Seats Adjustable Steering Air Bag(s) Air Conditioning Anti-Lock Brakes Back-up Camera Backup Camera Bluetooth Body Side Moulding CD Player Center Console Child Proof Locks Climate Control Cruise Control DVD Player Disc Brakes Dual Climate Control Fog Lights Fold Down Rear Seat Front & Rear A/C Front Bucket Seats Full Carpeting Hands-Free Leather Seats Leather Upholstery Luggage Rack MP3 Player Multi-zone Climate Control Navigation Navigation System Power Brakes Power Liftgate Power Locks Power Mirror(s) Power Mirrors Power Seats Power Steering Power Windows Premium Audio Premium Wheels Rear Defroster Rear Parking Assist Rear Window Defroster Rear Window Wiper Reclining Front Seats Remote Fuel Door Remote Trunk Release Satellite Radio Side Airbags Stability Control Steering Wheel Controls Sunroof Tilt/Telescope Steering Wheel Tinted Glass Tire Pressure Monitoring System Towing Package Trip Computer Turn Signal Mirrors Vanity Mirrors Read More…\nRest assured, once you take this CADILLAC ESCALADE ESV ESV home you will know you've made a solid investment. The powerful 6.2L 8 cyl engine accelerates strongly and more than holds its own in the toughest of traffic. They say money can'...\nRest assured, once you take this CADILLAC ESCALADE ESV ESV home you will know you've made a solid investment. The powerful 6.2L 8 cyl engine accelerates strongly and more than holds its own in the toughest of traffic. They say money can't buy happiness but for a small price we're certain you can feel it inside this luxuriously crafted CADILLAC ESCALADE ESV ESV. Check out all the power, convenience and safety options that are offered on this baby. You will not find another fully equipped CADILLAC ESCALADE ESV ESV like this at any price! The cosmetics of the exterior will reveal some very minor scuffs and blemishes in the finish but only under close examination. All in all, it is a very clean looking ride. Given that this is a used vehicle, the interior is really in very good shape with no rips, tears or stains to be had anywhere in it. We provide a free CARFAX report without the run around and hassle on this vehicle and all others on our lot. Be sure to ask us about our optional extended warranty packages that are available and at very affordable prices. We at Posada's Trucks make financing a breeze with our BUY HERE - PAY HERE program. We stand by our claim that we can have you on the road with an affordable payment plan the same day you walk on to the lot. Everyone has credit problems but at Posada's Trucks we don't feel this should prevent you from affording transportation. Our GUARANTEED FINANCING will do the heavy lifting, get you approved, and have you back on the road in no time. With amazing deals at Posada's Trucks, you will be sure to drive away smiling. We are conveniently located near Duluth.", "label": "Yes"}
+{"text": "A young boy killed three of his school friends because of careless driving has now claimed it was one of the victims who caused the crash.\nThe 17 year old originally admitted that he was in the front passenger seat in the Peugeot 205 when it crashed on a single track road.\nThe collision killed two boys aged 15 and 16; also a girl of 18 was killed in the fatal accident.\nThe Peugeot 206 collided with a large wall support wall causing the fatal car accident.\nInvestigation’s into the crash shown that the car was travelling at a minimum of 50 to 45 miles per hour when the fatal accident occurred.\nThe 15 year old boy was thrown from the car and landed 15 meters away from the vehicle.\nThe 17 year old told police that the female was driving the car when the fatal car accident occurred.\nWhen he was in hospital recovering from his injuries, he admitted to his father that he was driving the car and caused the fatal accident.\nHe told his father that he had been driving down the road at around 45 mph when the female grabbed the wheel to straighten the car up, when he pulled the wheel away from her causing the fatal car accident.\nHe pleaded guilty to causing their deaths and driving without due care and attention.\nThe 17 year old male driver called the emergency services at 8:15pm. As he was distressed it took around 15-20 minutes to find his location. Police arrived at the scene at 8:55pm.\nOn arrival at the scene it was clear all three passengers passed away at the scene.\nThe impact of the crash caused the engine to detach from the car and was on a nearby verge.\nFor more information please see link:\nFor more information on fatal car accident compensation claims please see link:", "label": "Yes"}
+{"text": "Come and check out this very well maintained 2014 Ford F150. Highway Miles. Lots of trips from CT to camp in ME. Always synthetic oil changes every 10,000 miles. K&N air filter. New brakes and tires 11,000 miles ago. Blue tooth. Ford In Sync. Runs like new. New rear after factory bumper, another complete set of wheels with snow tires, cap, bed mat, Weather Tech floor mats. Great truck for winter, second work truck, daily driver, or first truck for a new driver. Used to tow boat and motorcycles with it. Added trailer brakes. Class IV hitch. Selling because new camper is too heavy to tow. Expertly detailed inside and out by the professionals at SC&C. This one is untouched and ready to be made your own with lots of life left in it.\nOne owner well maintained with highway miles. Everything works, great daily driver. -NO RUST! -Oil undercoated every year! -Cap -Winter wheels with snow tires -Remote Start -Running Boards -New brakes & Tires -Oil changed religiously (Synthetic) -5.0 V8 -4X4 -SYNC -XM Radio -Weathertech Mats.", "label": "Yes"}
+{"text": "2007.5 - 2018 6.7L DODGE CUMMINS NEW BOSCH HIGH PRESSURE INLET TUBE (SINGLE)\nNew Fuel Injector Feed Tube for 2007-2018 Dodge Cummins 6.7L\nReference #’s F00RJ01831 / 2872395 / 4929864\nAs recommended by Bosch it's vital to replace these tubes every time the injectors are changed. Leakage at the tube is a common problem, which causes hard start and no-start symptoms. Also, proper torquing of these tubes is vital as it's a metal on metal seal with no gaskets!\nNEED A SET OF 6? SEE BDD PART #D67TUBE-6 FOR $168.00 PER SET!\n**⚠California Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.", "label": "Yes"}
+{"text": "Well I finally fixed it. The previous owner had removed the ASC and ABS yellow lights to hide an ABS problem. I replaced the LED lights and scanned the car. 2 bad ABS wheel sensors. I replaced those, cleared all the codes and now everything is working like it should.\nI can only image that the previous owner had taken the car to a garage where they had said \"oh it's probably the ABS pump and module, will cost £1,000+ to fix..\" you know how garages are with their worst case scenario prices, rip offs.\nThe owner then has not wanted to fix it and removed the yellow LEDs so it would pass an MOT as they don't check for ABS problems if the lights are off. Stupid I know.\nIt's cost £45 to fix and about 4 hours work on the car. I'm glad I investigated this as I have a 4 year old son riding in the back. People can be so stupid at times. So 330downer, get the clocks out of your car and see if the LEDs are still there, if they are not, scan it and see what error codes are present.", "label": "Yes"}
+{"text": "No one ever wants to have to deal with this issue, but sometimes your car starts overheating, leaving you stranded on the side of the road or at the nearest gas station. What could have caused it to happen, and what should you do now?\nThere are lots of reasons your car may be overheating, most often related to low coolant levels in your radiator. However, other issues could include a malfunctioning fan or belt or broken hoses. Although you may not have the first clue about why your car is overheating, the good news is there are a few important steps you can take to make sure your car cools down efficiently and you can get the servicing you need to get back out on the road.\n1. Turn off the engine. The fastest way for your car to cool down is for the engine to stop running.\n2. Wait for your car to cool down. If you move too quickly, you could end up with burns or damage to your vehicle.\n3. Don’t take the radiator cap off. If you think the issue may be your coolant, you will want to make sure your car is completely cooled before attempting to access the radiator.\n4. Once your car is properly cooled, check the coolant and all your belts and hoses for breaks, blockages, and leaks.\n5. Keep a safety kit in your car. If you are stranded because your car is overheating, having the right equipment and supplies can make you more comfortable while you wait for help.\nIt’s important to schedule routine servicing of your auto air conditioning, so give us a call at Kevin’s Car Repair & Body Shop LLC if your car is overheating or you need to top off your coolant. We’ll be happy to help you safely get back out on the road.", "label": "Yes"}
+{"text": "This previous week we have been delighted to receive several Snow Motor photographs from Clem Clement of Virginia. All of the news Audi Q3 : Prices and Specification Query style, Q3 differs from its massive brother, the Q5, with its front and adorned more threatening to chew into the bitumen. The British auto brand and the Italian coach builder have designed 5 cars together, relationship back to the DB4 GT Zagato in 1960. A day after Tata drove the automobile to the ramp on the ninth Auto Expo here and the world gaped in awe, several element producers determined to raise the veil of secrecy and told Enterprise Commonplace how the automotive was put collectively by means of collaborative engineering. The launch of the Acura NSX supercar got here at a time when the Japanese auto industry appeared on the verge of taking up the world.\nAfter we posted many good news about the cars and manufacturers that may come on the Geneva Motor Present, now we carry you some dangerous news: Pagani introduced that the Zonda-R will not make its appearance to Geneva. Honda T SW-400 world of the scooter is healthier than ever, as they respond to issues of mobility proved considered and acceptable. Delivered weekly, the Autocar India bulletin keeps you up to date on the most recent automotive critiques and news from India and all over the world. Auto World does not sell, lease or disclose e-mail addresses to different organizations.\nAutocar India will preserve you up to date with particular presents, promotions, competitions and new merchandise. After we introduced the Alpine Concept it’s just about time to point our attention to the Koleos Idea, an SUV which the French automaker has been making ready as of Paris Auto Present 2006. Mazda is bringing a model new sports activities car to the 2015 Tokyo Motor Present media preview on Wednesday, October 28. The Daily Information Autos team might be in Japan to cowl the launch stay, as it occurs. If you’re excited about the most costly automotive in the world at this time it isn’t doable to offer an exact answer. Entry member only content material, participate in discussions with comments on blogs, information and opinions and obtain all the most recent information and critiques straight to your inbox.\nThe Duster-based Renault Captur SUV has been noticed testing in India for the primary time, courtesy of IAB readers Giftson. These are offered by the importers, with a star from the world of sport or present business at the wheel. The news sections contains every little thing you might be on the lookout for, speculative information, launch stories, unique ideas, rumors and evaluation in a straightforward and interactive manner for you. For the first time in years, the Tokyo Motor Present isn’t a unusual outlier within the auto present circuit. The news part will get updated day-after-day with freshest and unique information every hour.\nThis publish was made utilizing the Auto Running a blog Software from This line won’t appear when posts are made after activating the software to full version. That’s okay as a result of this year in Tokyo, Toyota’s luxurious division, Lexus, wants to remind the world how it reinvented the luxurious car world 25 years ago. The excessive-efficiency tuning firm brought three models for the renowned auto show. Auto World is introduced in a enjoyable format, full with automotive bumper music and the prospect to answer automotive questions and win prizes. The information part consists of introduction half, the informative part and the abstract with excessive resolution pictures and a detailed image gallery with each news story. Daimler’s city automotive model Sensible held the world premiere of the Good forfood concept on the 2016 Bologna Motor. The excellent news is that the IRS does not prescribe one specific system of keeping records that should be used.", "label": "Yes"}
+{"text": "12 questions from our users\nWhat is a second hand X320, 800hrs, in good condition worth?\nNot much pete. I only priced a new one yesterday at the local dealers, they quoted me $9400, I paid $8000 for it 6 years ago.\nYou would maybe get around $2500.00 for it if your lucky.\nPlenty of new stuff out there pretty cheap now.\nIs the x300r old stock?\nShould I consider buying a x300r with 1209 hours on the clock?\nWhat is the cost to replace a ground drive belt on x300 jd mower?\nWhy does our JD x300 mow for an hour or two then just shut off and refuse to start?\nI have not experienced this problem. I have not had any problem with the engine. I assume that it is either a fuel or ignition problem. I only use high test gas without ethanol. and add a little sea foam. This is expensive but a lot cheaper in the long run than taking the carburetor apart to clean it. You should be able to determine if it is one of the above easily by removing the spark plug to see if it sparks when you turn the engine over. If it does then check the carburetor to see if it is getting fuel.\nWhich motor is in this machine?\nHow old is it?\nHow many hours has it done?\nHas the servicing been done?\nMaybe new spar plugs or other electrical parts have failed,\nHow far well the seat adjust?\nI have an x300 with a bad bearing in the mower deck,left side.Are there any left hand threads that I need to be aware of while changing bearings?\nThe thread will tighten in the direction in which the blades are turning. Sometimes it is just as easy to buy a whole new bearing block, it will cost you $60 to $70 for a whole new assembly and $40 to $50 for new bearings. I would buy a new assembly to get me back up and running and repair the old one and keep it as backup. I think they call them spindle bearing assemblies. Hope this helps.\nTrying to put a wheel back on after punctured tyre repair...having trouble...any hints?\nMy X320 is 4 yo, about 100 hours, mowing about 3 acres. I replaced the starter under warranty after 2 years. My biggest problem is with dealers supplying wrong parts: the manufacturer swapped and changed things around, so one model can have several configurations. Latest problem - an air filter without a metal guard on it. I found this was a problem when a mouse chewed a hole through the paper filament. I found it early and replaced filter. All the same, I am having mechanical problems. The motor struggles when I engage cutting deck. On servicing it, I found deck belt was badly damaged, maybe caused by a stick. However, I also found the pulleys are very stiff and maybe this is the real problem. Maybe I have over-greased the nipples. Is anyone familiar with this problem i.e. stiff pulleys? Any solutions? I will probably end up getting the professionals to service it.\nI'll update this. I've had my X320 serviced now and the problem was the mouse. However, it wasn't the gnawed air filter that did the damage but a gnawed wire to the coil. It's a lot cheaper to fix. If the coil hadn't failed, I might have sucked rubbish into the carburettor, so I got lucky (I guess). Now I just need a mouse trap that can't fail.\nX300 safety start switch intermittent requiring several cycles of the right pedal to make electrical contact. Problem getting worse. Switch seems to work but is in a very dirty environment / location. Looking for a way to diagnose the problem, ie, the switch, dirt, contacts, loose wiring somewhere ?? Anybody had this problem ?\nI have a 2013 x360 john deere that will stop running after 30 minutes of mowing. Let it sit for 5 minutes. It will restart and run for another short time and it does again...have been through the cap vent and that it not the problem...Do you have any ideas I can try??? Thanks!\nProductReview.com.au has affiliate partnerships. These do not influence our content moderation policies in any way, though ProductReview.com.au may earn commissions for products/services purchased via affiliate links.", "label": "Yes"}
+{"text": "Novitec Rosso, specialized in customizing Ferrari cars, has added some of their own modifications to the N-Largo F12 Berlinetta. These modifications refer to a brand new chassis, a better propulsion system and new components.\nThe chassis on the modified F12berlinetta is made of carbon fiber, in a form that encourages aerodynamics. 11 additional centimeters have been added to the standard chassis, focused on the rear wheels, along with an extra 6 centimeters on the width.\nN-Largo's conversion has been adapted with forged wheels Novitec Rosso Nf5 NL, with a combination of 22 inch rear wheels and 21 inches in front.\nThe suspension has been customized so that it could be lifted, if necessary and the initial version has been added 781 hp, which helps the car have a maximum speed of 350 km/h.\nThe 12 cylinder engine, with a capacity of 6.3 liters and four valves has been also improved with a new engine management system.\nThe interior can also be customized with any color of Alcantara leather.", "label": "Yes"}
+{"text": "Distracted Trucking Is Extremely Dangerous\nDistraction Behind the Wheel Can Lead to Devastating Truck Accidents\nNearly 4,000 people are killed and thousands more are severely injured in truck accidents every year in the United States. The victims are usually the drivers and occupants of other vehicles involved in the crash. Sometimes pedestrians are also injured or killed. Statistics show that the cause of a majority of truck accidents is distracted driving – by truckers as well as drivers of other vehicles.\nDistracted trucking is extremely dangerous and irresponsible behavior because the potential destructive force of large tractor trailers in motion is huge. Talk to any experienced truck accident attorney and he will tell you that a significant percentage of his clients were victims of distracted trucking.\nMeaning of Distracted Trucking\nDistracted trucking occurs when a truck driver engages in another activity while driving, such as texting, adjusting the radio and eating. Any activity that takes the trucker’s eyes away from the road, even if only for a few seconds, can cause the driver to lose control of his or vehicle. In areas with heavy traffic, the consequences can be especially devastating.\nCauses of Distracted Trucking\nThere are several causes of distracted trucking. Using a cellphone to talk or text has been one of the chief causes in the past one and a half decades. But cellphones are not the only causes of distracted driving; some have existed since the invention of motor vehicles. Some of the most common causes of distracted driving are:\n- Using a cellphone while driving\n- Texting while driving\n- Talking to passengers\n- Eating and drinking\n- Dropping something and bending down to pick it up\n- Adjusting the radio or stereo system\n- Talking with a crew member\n- Handling GPS devices\n- Daydreaming or being lost in one’s thoughts\nThe Statistics Are Disturbing\nTruck accidents result in thousands of fatalities and hundreds of thousands of injuries requiring medical attention each year. Below are some disturbing facts and statistics obtained from distraction.gov:\n- The number of people killed and injured in the United States in 2014 (the last year for which complete data is available) were 3,179 and 431,000 respectively. Many of these deaths and injuries occurred in trucking accidents.\n- 10% of all drivers between 15 and 19 years of age involved in fatal crashes were reported to be distracted at the time of the crash. Truck drivers can start as young as 18 years as long as they are planning on trucking only within their own state.\n- 26% percent of all drivers in their 20s who were involved in fatal accidents were reported to be distracted at the time of the crash. 38% percent of them were using cellphones.\n- The percentage of people visibly texting or handling some other handheld device while driving rose from 1.7% in 2013 to 2.2% in 2014. Young drivers have been observed using electronic devices while driving at a higher rate than older drivers.\n- A survey by Erie Insurance in 2015 showed that drivers do all sorts of things behind the wheel, including changing their clothes and brushing their teeth. The survey also found that more than 30% of drivers text when driving.\n- The average time that texting keeps a driver’s eyes off the road is five seconds. When driving at a speed of 55 mph, that is enough time to cover the length of a football field. Imagine driving that distance blindfolded.\n- At any given moment during the day, more than half a million drivers are using cellphones or other electronic devices while driving across the United States. Since an estimated 15.5 million of these vehicles are trucks, it can be deduced that many of these distracted drivers are truck drivers.\nConsequences of Distracted Trucking\nTruck crashes often result in massive property damages and debilitating injuries, such as spinal column injuries (SCI), traumatic brain injuries (TBI), loss of limbs, whiplash, fractured bones, and severe burn injuries. These injuries and their symptoms can last for a lifetime.\nAnyone can be a victim of distracted trucking. If you or a loved one has been injured in a truck accident, contact an experienced truck accident attorney immediately to discuss your best legal options for recovery.\nOur lawyers have decades of experience in providing excellent results in these areas of practice.", "label": "Yes"}
+{"text": "It’s never a good idea to get tanked while driving around town, but that’s exactly what happened to one unfortunate driver in the city of Vilnius, Lithuania who decided to park in the bike lane. To the city’s mayor Arturas Zuokas, an avid bicyclist, this was nothing short of heresy, and he’d “had enough of these drivers parking their luxury cars on bike lanes and pedestrian crossings”\nHis solution was to drive over the Mercedes with an armored vehicle, and the smile on his face as he turned the sedan into scrap was nothing short of beaming.\nOf course, crushing citizens’ cars is not the status quo for mayors in Baltic states and the whole thing was in fact a stunt put on for a Swedish television series. Zuokas, who the BBC reports has long tried to get his city cycling, explained his vigilante move:\nYou have to have a sense of humor in my line of work and I thought this would be a way of drawing attention to the fact that the city intends to be proactive in its fight against illegal parking.\nTreehugger describes the act as “cathartic” for the mayor, and we have to agree. But, in the video when the car’s supposed owner walks nonchalantly onto the street, looking more dumb than dumbstruck, the jig is most definitely up.\nStill, we really liked seeing a car being run over by a tank. Thanks, Mayor Zuokas!", "label": "Yes"}
+{"text": "just wondering whos got any and what they are. I have a tmaxx. But geting rid of it. Might get the e-revo.\nhey ill buy one em planse off u or a chopperI dont have any cars, but I have a few planes and a helicopter (which I have never flow b/c it is ridiculous controls but bought it off a buddy to help him out). I can't remember what I got my little brother a couple years ago for his bday, but it was a huge Hummer H2 w/ 4 wheel drive. The thing was bad ass, it would do like 35, which I know is slow compared to some of them out there, but the thing was llike 18 inches high. Can't remember the scale of it, but he got rid of it last yr for another ps3....the punk.", "label": "Yes"}
+{"text": "SERVICE MANUAL HONDA LEAD\nHONDA LEAD SCV100 OWNER'S MANUAL Pdf Download.\nView and Download Honda LEAD SCV100 owner's manual online. Honda. LEAD SCV100 Scooter pdf manual download. Scooter Honda CH80 Service Manual (186 pages) Scooter Honda NPS50 RUCKUS 2003 Service Manual (296 pages) Scooter Honda Zoomer Service Manual. 2003-2007 (297 pages) Scooter Honda 2015 Ruckus NPS50 Owner's Manual\nScooter Honda Lead SCV 100 full service manual - YouTube\nClick to view on Bing4:17Sep 01, 2016Scooter Honda SCV 100 lead full servis guide / manual Honda SCV 100 LEAD 103 ccm3 Year of manufacture 2003 - 2007 - oil change / replacement - sub air filter change / replacement - air filterAuthor: Kodl KodlykViews: 38K\nHonda Lead Nhx110 2009 Service Manual - newsmanuals\nHonda lead nhx110 2009 service manual pdf contains help for troubleshooting and will support you how to fix your problems immediately. Perfect for all DIY persons!. Your Do-It-Yourself specialist for service manuals, workshop manuals, factory manuals, owner manuals, spare parts catalog and user manuals.\nmanuel honda lead | Honda Owners Manual\nFind your Honda Owners Manual here at honda-owners-manual for manuel honda lead and you can get it. Search for manuel honda lead here and subscribe honda-owners-manual manuel honda lead read more!\nHonda Lead Nhx110 2009 Service Manual\nHonda Lead Nhx110 2009 Service Manual pdf manufactured by the company HONDA presented for you in electronic format Page size 612 x 792 pts (letter) (rotated 0 degrees) . This manual can be viewed on any computer, as well as zoomed and printed, makes it easy to diagnose and repair problems with your machines electrical system.\nSOLVED: 2007 Honda SCV 100 Lead wiring diagram - Fixya\nOct 11, 20172007 Honda SCV 100 Lead will not move forward Hi, Jill for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.\nHonda service manuals for download, free! - carlsalter\nFree Honda Motorcycle Service Manuals for download. Lots of people charge for motorcycle service and workshop manuals online which is a bit cheeky I reckon as they are freely available all over the internet. £5 each online or download your Honda manual here for free!!\nPrint & Online Honda Scooter Scooter Repair Manuals\nHaynes Publishing provide manuals for a wide range of Honda Scooter models. Learn how to make DIY scooter repairs and service your Honda Scooter with our comprehensive guides.\nHonda Service Repair Manual Download\nHonda Service Repair Manual Free PDF Common, cb400, cx500, gl1500, gl1800, cb250, vfr800, cb1100, cb750, cb500, c90, xr200, Transalp, xr100, Varadero.\nMotorbikes | Honda Service Repair Workshop Manuals\nToday, Honda is the largest motorcycle manufacturing company in Japan and is a leader around the world. Honda motorbikes are known for reliability, ease of ridership, and an excellent horsepower-to-weight ratio. Many young motorcycle mechanics start out with a Honda motorbike repair manual and a well-used bike and learn as they go.\nRelated searches for service manual honda lead\nhonda lead 125 service manualhonda service manualhonda service manual downloadfree honda service manual downloadfree honda motorcycle service manualsleads 2000 manualohio leads manual", "label": "Yes"}
+{"text": "The Land Cruiser Dakar Rally is one of the most exciting rally cars that you can buy. This vehicle was developed by a German car manufacturer and it is a very good example of modern engineering.\nIf you are looking for a car that is both strong and lightweight, then the Land Cruiser Dakar rally car may be just what you are looking for. This vehicle weighs about 4.5 tons and this means that you will be able to carry it over the hills easily. It is very stable and you can even take it on the open road without much problems. It can also be driven in remote areas without much trouble as well.\nThe Land Cruiser Dakar is powered by four-wheel drive. It has a great engine and you should not have any problem with it. However, you need to make sure that you have the right engine and that you do not get any problems before you begin your rally driving adventure with this vehicle.\nThis vehicle is not very difficult to drive and you will not have a problem with the different types of roads that you encounter while driving this vehicle. You also need to make sure that you take care of this car as it requires a lot of maintenance. You will need to regularly tune the engines and the tires as well. If you are going to take this vehicle on long journeys, you can always bring an experienced driver along with you to help you out when it comes to this problem.\nThe car is also very easy to use as you will not have to worry about any problems like the lack of cruise control that you would have had to deal with if you were using a regular car. You will also need a steering system that is comfortable to drive and this can easily be achieved with the help of this kind of car. You should ensure that you get the right type of tires for this vehicle. These tires will provide you with excellent grip on the road as well as they will provide a smooth ride.\nThis rally car is a perfect choice for those people who want to experience an extreme rally driving experience. It can even challenge the professionals when it comes to driving it. You will be able to make your own rules and you will also be able to get a feel of how it would feel to go on a long trip with it. The best thing is that the vehicle is very safe as well so you will not have to worry about the safety of your precious cargo.\nDakar Rally 8: T8-winner Xavier Foj to enter 88th consecutive – land cruiser dakar rally | land cruiser dakar rally\nLuis Barbery en el Dakar 8 Fj cruiser, Toyota fj cruiser – land cruiser dakar rally | land cruiser dakar rally\nToyota Land Cruiser VDJ8 Dakar Rally 8 on Behance – land cruiser dakar rally | land cruiser dakar rally\nWhen Jeep wins the Dakar rally I’ll consider buying one Land – land cruiser dakar rally | land cruiser dakar rally\nThe 8 Dakar Rally Toyota Motor Corporation Official Global – land cruiser dakar rally | land cruiser dakar rally\n8 astonishing adventures in the Toyota Land Cruiser – land cruiser dakar rally | land cruiser dakar rally\n8-dakar-rally-land-cruiser – Toyota UK – land cruiser dakar rally | land cruiser dakar rally\nDakar Rally Toyota Land Cruiser Highlights from Toyota at Flickr – land cruiser dakar rally | land cruiser dakar rally\nOther Collections of 8 Simple (But Important) Things To Remember About Land Cruiser Dakar Rally | land cruiser dakar rally\nFor every human being in this world, God has given something noble and good to his heart. Always keep your heart. Never underestimate yourself. If you're unhappy with your life, fix what's wrong, and keep going. Do not blame yourself for a wrong decision. Everyone makes it. Make them lessons for your next decision.\nThe Dakar is a non-stop rally car race that takes place in the Southern African continent between May and September every year. The Dakar rally, previously known as Paris-Dakar Rally, has become one of the world's most renowned off-road rallies and it is also among the toughest endurance races available for those who wish ...\nThe Dakar Trophy Truck is one of the world's most sought after trucks. The trophy truck is usually found in Africa, although you can find it in various countries, including Europe, Asia, and North America. However, if you are looking for the ultimate trophy truck that is both gorgeous and durable, the Dakar trophy ...", "label": "Yes"}
+{"text": "The vehicle in your driveway is head and shoulders above the rest when it comes to all the vehicles on the road today. Your Mercedes-Benz dealership isn't the only place to buy genuine or original equipment quality parts to repair your S600. Anyone who drives a Mercedes-Benz knows that when it comes to maintaining their car, truck, or SUV only the absolute best replacement parts will do. Car aficionados know that luxury is built into each Mercedes-Benz, and understand that only top quality repair S600 parts will suffice when maintenance needs to be done.\nOur vehicle's suspensions would not be where they are today without the invention of some key components. Shock absorbers became widely used on cars and trucks in the 1930s, and they contributed to the agility you feel today on your vehicle. Without your Mercedes-Benz S600 shock absorbers, you would not have a comfortable ride. The shocks on your car or truck dampen sharp movements by compressing and releasing a pocket of gas within the shock body using hydraulic pressure created by a valve and piston. Today, many small vehicles have replaced their shock absorbers with strut and coil spring assemblies; but not your Mercedes-Benz S600.\nBring your S600 back to life with the best new or rebuilt parts from the experts at Car Parts Discount. At Car Parts Discount, we have live customer service members on the phone with enough expertise to help you purchase the appropriate Mercedes-Benz S600 part for your needs. Trust in the value of the parts you get from carpartsdiscount.com and realize incredible savings on all your upcoming repairs. If your car or truck was built in , then you will find the correct Mercedes-Benz S600 Shock Absorber parts right here.", "label": "Yes"}
+{"text": "The outstanding Audi Q7 offers a relaxing blend of comfort and whisper-quiet driving mannersread the full model review\nThe e-tron model includes Virtual Cockpit, LED headlights and tail-lights, e-tron-specific styling and, obviously, the plug-in hybrid drivetrain. It costs a lot more than the regular 3.0 TDI 272, though, so is only worth considering if you're a company car driver.\nEngine:3.0 TDI 258 Quattro e-tron\nThe e-tron pairs the 3.0-litre V6 diesel with an electric motor. Combined, they give an official economy figure of 156.9mpg and CO2 emissions of just 48g/km, although don't expect that in the real world. A great choice if you're a company car driver.", "label": "Yes"}
+{"text": "Car driving lessons in Bray There are a number of people who are eager to learn driving to travel from place to place on their own. However, without professional lessons, people might suffer from dangerous accidents on road. A driver always needs to be careful and alert while driving and to achieve this, they need to take lessons from driving instructors who are experts in this field. The car driving lessons offered by our driving instructors in Bray are one of a kind and will make sure to turn any amateur into a smooth car driver.\nThe tasks of a car driving instructor\nOur car driving lessons are provided by professionals and approved car driving instructors. They provide practical as well as theoretical lessons to the drivers who are learners. They also make sure that the beginners are sufficiently educated on road safety and are completely ready for the theoretical examinations on driving. The instructors have an idea that no two beginner drivers are identical and hence, use different tutoring techniques for each one of them. They also monitor and keep track of the progress and improvement of the amateur drivers and plan several objectives of lessons to meet the needs of the learners.\nThe car driving lessons offered by us in Bray employ driving instructors who have sufficient knowledge about all types of cars and can clear any doubt from the learner’s mind. They are very familiar with the cars that are used, so that they may enumerate the functions and features of the vehicles. From starting the engine to the correct use of indicators, our driving instructors know them all.\nThe car driving lessons in Bray include formal sessions and programs which help the amateur drivers to receive a driver’s license or a learner’s permit. These classes are generally held in the car, in classrooms, or in both. These sessions are held mainly to discuss the rules that are to be followed while driving on the streets; and the ways in which hazardous conditions such as driver impairments, dangerous road conditions, and severe climatic changes should be dealt with. The driving instructors also show many educational videos which demonstrate proper strategies for driving safely as well as the repercussions of not following the rules.\nCar driving lessons in Bray\nOur car driving lessons in Bray are special\nOwing to the several years of providing car driving lessons to our clients, our driving instructors have gained a lot of experience which helps in providing proficient driving lessons to the learner drivers. The people who wish to learn how to drive a car properly are free to contact our car driving lessons agency in order to receive efficient services from professional driving instructors. Our instructors handle the beginners with patience and professionalism and give good and useful advice to them so as to make them better and approved drivers. We deal with several clients on a regular basis and for our skill and adapt services, we have maintained a long term bond with them. So, if you want to obtain your driver’s license, contact us and receive our car driving lessons in Bray.\nDriving Lessons, Car Driving lessons, Bike Driving lessons, Learning permit lessons, Full driving licence lessons, Car driving lessons in Bray\nDriving lessons, Car driving lessons, Bike driving lessons, Local driving lessons, Bray Driving Lessons, Car Driving lessons in Bray, Bike Driving lessons In Bray, Learning permit lessons in Bray, Full driving licence lessons in Bray, Best driving licence lessons in Bray, Car driving lessons in Bray\n|9:00 am - 6:00 pm||9:00 am - 6:00 pm||9:00 am - 6:00 pm||9:00 am - 6:00 pm||9:00 am - 6:00 pm||-||-|", "label": "Yes"}
+{"text": "The race is on in the transportation industry—the race to enable our customers to create emerging technologies that keep them competitive in the rail, truck and automotive sectors. And with these advancements come exacting specifications which must be met to ensure an error-free product and an on-time delivery.\nOn-time. Targeted. Dependable. Client-centric. Circuit card assembly and electronics manufacturing for the times that risk is not an option.\n- Safety protocol systems\n- Integrated control systems\n- Performance enhancement controls\n- Dashboard controls\n- Alarm systems\n- Timing interface controls\n- Modular bus multiplexing\n- Electronic lighting controls and systems", "label": "Yes"}
+{"text": "Shanghai Motor Show 2009: New Rolls-Royce to be named Ghost\nRolls Royce 200EX (Ghost) Concept - Click above for a high-res image gallery\nToday in Shanghai China, Rolls Royce CEO Tom Purves announced that the company's new model would be called Ghost. The new smaller Rolls which had been referred to previously as the RR4 was shown as a concept called the 200EX at the Geneva Motor Show in March and will debut in production form at the Frankfurt show this fall. The Ghost uses a stretched version of the platform from the new BMW 760Li including a modified version of the 6.0-liter twin turbocharged V12 engine.\nGhost is a traditional Rolls-Royce name that like Phantom was meant to convey the extremely smooth and quiet operation of these British luxury machines as they slip through the world. The Ghost will eventually spawn coupe and convertible variants as well some time after the four door sedan goes on sale late this year.\nROLLS-ROYCE MOTOR CARS NAMES RR4\n* Press Release\nRolls-Royce Motor Cars has announced the name for its new model series which until now has been known as RR4. The name was announced by CEO, Tom Purves at a press conference held at the Shanghai motor show.\nThe new car will be called the Rolls-Royce Ghost and production will begin at the company's Goodwood manufacturing facility on the south coast of England later in 2009.\nRolls-Royce Motor Cars CEO, Tom Purves, said, \"We are delighted to formally announce the Rolls-Royce Ghost. It is one of the most revered names in the automotive industry, evoking images of adventure and technical innovation. The name reflects this new model's breadth of abilities. The first cars to bear the Ghost name were known not only for impressive dependability and refinement but also great flair and style. This car will be the first in a new generation of models to carry this evocative name and will give us two pinnacle product lines – Phantom and Ghost.\nThe Rolls-Royce Ghost will be built on its own dedicated production line at Goodwood but will share paint, wood and leather workshops with the Phantom series of cars. Rolls-Royce has expanded all areas of its manufacturing facility over the last 18 months to prepare for the introduction of the Ghost model.", "label": "Yes"}
+{"text": "Engineering students of NIT of Jamshedpur have set an example for B-town ‘Engineer-Idiots’ by manufacturing a wonder car which would be hitting the racing track in the London’s Formula-student-UK-2011 to be held from July 13 to 17.\nThe 11 engineering students of NIT Jamshedpur have developed wonder car equipped with several special features. The previous version of this car had brought laurels to the institution and students by winning the Formula Society Automobile Engineering Australian Racing in 2011 in Melborne.\nTeam leader Uttam Kumar a mechanical engineering student said, “After participating in the Australia Formula Racing, many modifications have been done in the engine. Earlier it was of 150cc but now the capacity has been raised to 600cc. Now the wonder car can touch a top speed of 200km per hour. The weight of the car is 270 kg.”\nThe creators of the wonder car have named it Drift Racing 211 (DR 211).\nThe engineering students informed that at least Rs 24 lakh has been invested in the car. And companies like Tata Steel, Korba Engineering Private Limited and Soma of Metals have helped the students by giving the potential sponsorships.\nPleased with the effort, the Director of NIIT Jamshedpur has congratulated the institute team involved in the project.\nThe team of students involved in the car manufacturing includes Uttam Kumar, Rahul Singh, Saumyadeep Vishwas, Alok Srivastava, Aditya Kumar, Saket Sardar, Turam Purti, Nitin Agarwal and Alok Verma.", "label": "Yes"}
+{"text": "5 Common Mistakes when buying a Car\nYou like convenience, you like quick decisions, you want it and you want it now! Am I right?\nThat’s all well and good but are you getting the best value car and the best value deal?\nThere’s never been greater access to information on everything from make, model, fuel efficiency, past accidents and more to help you make the right decision.\nBut are you making the most common mistakes that can cost you down the line?\n- Only shopping at one dealership: Experts say three dealerships is the minimum to compare deals. Be fully transparent in letting each dealership know who else you’ve spoken with and what they’ve offered.\n- Not checking out the dealership’s internet department: Yes, dealerships have online departments. It’s a great way to skip the time spent waiting at the dealership negotiating a price and do quick price comparisons of similar models.\n- Not making the most of the test drive: Does anyone really relax and take in the experience of the test drive? Are you really testing it for your lifestyle? Have a checklist in mind as you drive and see if it’s hitting all your needs; for example, is it easy to get in and out of for every family member? And do all of your car seats fit safely in the back?\n- Not calling your insurance agent: There are other factors to consider when figuring out how much your new car will cost. Will your insurance premium increase?\n- Choosing one-stop shopping convenience: Don’t just accept the dealership financing. If you don’t shop around, you may end up spending more.\nTalk to us about the pros and cons of taking out a PCP versus our Credit Union Loan or check out our blog on the difference between a Credit Union Car Loan and a PCP HERE\nWe are Real People giving you Real Life, we want the best deal for you.\nCall 042-9675000 to talk to one of our Lending Team.\nCheck out how much a Credit Union Loan would cost you\nChoose Loan Amount Required\nAmount of € loan required*", "label": "Yes"}
+{"text": "( 1960 1961 1962 1963 1964 1965 1966 )\nListing Expired for: 1963 Mercury Parklane\nPlease click on \"INVENTORY\" to see full selection of vehicles available, or use the \"Quick Search\" function.\nGateway Classic Cars of St. Louis is proud to offer a stunningly clean 1995 Chevrolet Camaro Z28. This Z28 is a one owner, which has been garage kept as a secondary car since new. The vehicle has not.....\nFor sale in our St. Louis Showroom is a Flamingo Pink 1959 Ford Thunderbird Convertible. This T-Bird underwent an extensive restoration in the mid 1990’s and still shows very well. The restoration performed.....\nThe Gateway Classic Cars Saint Louis Showroom is proud to offer this 1986 Classic Tiffany by Classic Motor Carriages, which has been in the same family and garage kept since 1986. This unique ride began.....\n© Copyright 2018, Gateway Classic Cars | All Rights Reserved\nGateway Classic Cars\n1237 Central Park Dr. O'Fallon, IL. 62269\n0 Classic and Exotics For Sale Today", "label": "Yes"}
+{"text": "Used Chevy Impala For Sale at Strongsville, Ohio Chevy Dealers\nUsed Cars For Sale at Ohio Chevy Dealers\nPublished September 29, 2017\nUsed cars for sale at your local Ohio Chevy dealers are super easy to find when you stop at Serpentini Chevy in Strongsville, Ohio! Finding your next used cars for sale in Ohio has never been easier than it is today with the vast and impressive amount of used cars for sale available for you to come and explore today! No matter if you have been searching for some time now to find the perfect used cars for sale or you have just started looking around, you can put an end to or entirely avoid the back and forths of trying to locate the perfect vehicle and the headaches and stresses that can come with it! With a broad range of used cars for sale at our Ohio Chevy dealers, from the used Chevy Impala to the used Chevy Silverado for sale as well as many other, we are confident at Serpentini Chevy that you will find the used car that is going to meet or exceed all of your expectations for a low price that is sure to fit your budget! Our friendly Serpentini Chevy team understands that when you stop by our Ohio Chevy dealers that you may find yourself with many questions from exploring so many options. Our experienced and knowledgeable team is ready to show you through the ins and outs of each used Chevy Impala for sale to ensure that you get into the used cars for sale that suit all of your needs as well as your wants in one great package so that you can get back out onto the open road!\nYou can take a look through our wide range of used cars for sale right here online on our Serpentini Chevy website from the leisure and convenience of your home and contact us today to schedule a time to stop in for a test drive to discover what the used Chevy Impala for sale is all about! The used Chevy Impala for sale is sure to impress both you and your passengers with its luxurious interior and spacious seating for five, the many desirable features and pieces of equipment that you can find throughout, as well as the sleek exterior styling that is sure to turn heads wherever you go! With an impressive drivetrain under the hood of the used Chevy Impala at our Ohio Chevy dealers, the 3.6L DOHC V6 DI with Variable Valve Timing Engine and smooth 6-Speed Automatic Transmission, you can cruise the open roads with ease and spend less time and money at the fuel pumps thanks to an estimated 19MPG in the city as well as up to 29MPG on the highway! Our Ohio Chevy dealers of Serpentini Chevy Strongsville are ready for you to come by and try out the used cars for sale for yourself to see what they are all about! You can find our Ohio Chevy dealers right here at 15303 Royalton Rd, Strongsville, OH 44136 and if the used Chevy Impala is not quite what you are searching to find, you can explore all of our fantastic new cars for sale and also our used cars for sale!\nIMPALA LTZ (2LZ) WITH ONLY 33K MILES ,POWER SUNROOF W/ 2ND ROW SKYLIGHT ,NAVIGATION SYSTEM ,HEATED STEERING WHEEL ,HEATED/VENTILATED FRONT LEATHER SEATS ,6-WAY DRIVER POWER SEAT ,CD PLAYER ,SATELLITE RADIO ,STEERING WHEEL AUDIO CONTROLS ,BOSE CENTERPOINT SURROUND SOUND ,CRUISE CONTROL ,KEYLESS... Read More\n2017 Chevrolet Impala LS in Blue Velvet Metallic Dealership Highlights Include... and 2017 Chevrolet Impala LS in Blue Velvet Metallic Vehicle Highlights Include.... Preferred Equipment Group 1LS. Set down the mouse because this 2017 Chevrolet Impala is the car you've been looking for. This Impala... Read More\n2017 Chevrolet Impala LS in Summit White Dealership Highlights Include.... Preferred Equipment Group 1LS. You Win! Look! Look! Look! Creampuff! This attractive 2017 Chevrolet Impala is not going to disappoint. There you have it, short and sweet! With plenty of passenger room, you won't have to worry... Read More\n*** Tax, title, license and dealer fees (unless itemized above) are extra. Not available with special finance or lease offers.\n*EPA Estimates Only\nWe strive to update our website in a timely manner however Serpentini Chevrolet cannot guarantee that the inventory shown will be available at the dealership. We are not responsible for typographical and other errors, including data transmissions or software errors that may appear on the site. If the posted price, incentive, offer or other service is incorrect due to typographical or other error we will only be responsible for honoring the correct price, incentive or offer. We make every effort to provide you the most accurate, up-to-the-minute information however when you are ready to purchase products or services, it is your responsibility to verify with us that all details listed are accurate. Prices include all applicable rebates.", "label": "Yes"}
+{"text": "Runs, drives and stops but being sold as spares or repairs as out of MOT (End of April 2019). Work needing to be done includes lights, welding etc. Has 4 good tyres with plenty of tread and recent plugs and leads.\nIt originally had an arch and skirt kit fitted and over the years this has acted as a water trap and corroded the sills and arches underneath. Sill repair panels are available from us and we can supply at additional cost if required.\nThe worst areas of the body are shown in the pictures but the whole body needs some TLC. Due to this van having a rare standard low roof for a dayvan, it would make an excellent base for a custom/boogie 70's style van project.\nInterior is in average condition, with rock-n-roll rear bed, captains chair, blinds all round and original cassette player.\nThe original skirt/arch kit along with rear spare wheel rack and a few other spares will be included in with the sale if required.\nThis is a unique Chevrolet that was made in very low quantities in 1935 . The car was made in Belgium and then bodied in Germany by Glasser Bodymaker , the famous body builder who used to make the.....\nA true American classic and a beautiful engineered piece of art that will take you on a joy ride of memories and fun. This black on black Z06 will sure turn heads as you coast through the city streets.....", "label": "Yes"}
+{"text": "Reviewed By Chris A (Irving, TX) Reviewed for a 1997 Ford Expedition —7/31/2012 8:36 PM\nGood price good quality great results\nReviewed By Frank M (Export, PA) Reviewed for a 2010 Ford Expedition —4/15/2015 5:19 PM\nI'm not sure the \"tune\" that was written was all that great. Don't really feel any more power out of the vehicle. It is nice that you can change shift points, shift pressure, red line, etc. No real gains on HP, torque, or MPGs though.\nReviewed By Ronald B (Frederick, CO) Reviewed for a 2001 Ford F-350 —5/1/2016 2:28 PM\nThis tuner works wonders for the 7.3 powerstroke. It pushes the motor to redline and when the pedal is mashed, keeps it just below it, so you're running like a banshee throughout the power band! All of SCT's research and development have paid off in this unit. Super product I would highly recommend.", "label": "Yes"}
+{"text": "2016- Third generation Pilot\nHello Piloteers Community, new member here today.\nMy wife's 2016 Pilot has a failed AC compressor and repair cost is $2400 plus tax.\nWe traded her 2006 Pilot on this vehicle in Feb, 2016, which means we are now 8 months out of warranty with only 26,000 miles...ouch!\nI have called Honda Customer...", "label": "Yes"}
+{"text": "Suzuki to unveil all-new Vitara at the Paris Motor Show\nOn sale in the UK early next year, the all-new Vitara will be available with optional ALLGRIP intelligent four wheel drive and both petrol and diesel engines, and is positioned to rival the likes of the Renault Captur and Nissan Juke.\nCustomers will have the option of personalising the car with various colour and trim customisation options. According to Suzuki, further details of these, as well as final specifications, will be available closer to public launch.\nThe model is expected to launch to other markets in late 2015.", "label": "Yes"}
+{"text": "2010 Mercedes-Benz S-Class S 550 :\n||Auto, 7-Spd Spt & Comfort\n||S-Class S 550\n| Description :\n||A very luxurious car in and out. Runs great, very easy to maneuver and fun to drive, with lots of space in it. Powerful and silent engine. This car runs as fast as a sport car. It comes with a transferable 2-year Warranty.\n| Features :\n||Premium Pkg 1, Hill Ascent Control, Traction Control, Electronic Stability Control, ABS (4-Wheel), Anti-Theft System, Keyless Entry, KEYLESS-GO, Air Conditioning, Rear Air Conditioning, Power Windows, Power Door Locks, Power Close Doors, Cruise Control, Power Steering, Tilt & Telescoping Wheel, AM/FM Stereo, CD/MP3 (Multi Disc), Harman/Kardon Sound, Sirius Satellite, Navigation System, DVD System, Bluetooth Wireless, TeleAid, Parking Sensors (175), F&R Parking Sensors, Backup Camera (105), Dual Air Bags, F&R Side Air Bags, F&R Head Curtain Air Bags, Heated Seats, Cooled Seats, Dual Power Seats, Leather, Moon Roof, Daytime Running Lights, HID Headlamps, Fog Lights, Alloy Wheels.\nAsk Us About This Vehicle", "label": "Yes"}
+{"text": "1997 to 1998 skidoo brp snowmobile service repair Service and repair manual download: 1997 to 1998 Skidoo BRP snowmobile service repair workshop. Municipal & estate seized/ surplus asset auction! We presented complete option of this ebook in ePub PDF, txt, DjVu doc forms.\nAug 27 · i have about 24 hours on my razor when in park the check engine light comes on. We provide the best dealership experience to our customers as we provide them with the best available options. Browse parts by selecting your vehicle type. Find model year , download owner manuals by vehicle type model. With hundreds of pages it will show you how to distinguish any problem ( from an oil change to a transmission swap) how to fix it on your own. ค้ นพบ Link ทั �� งสิ ้ น 29483 รายการ 1. Shop with confidence. Today in Aviation History April 23, 1948: The prototype Aero Commander Model L- 3805 makes its first flight. Hoja10 Hoja9 Hoja7 Hoja6 Hoja5 Hoja4 Hoja3 Hoja2 Hoja1 FDM Hoja8 RESTO Formulario de Descripción de Mercancías \" FDM\" DATOS IMPORTADOR Anticipado Referencia. Polaris off- road vehicles can be hazardous to operate and are not. Avisos y clasificados gratis. Select a make or model below to instantly view its inventory. Polaris slt 700 service manual. HAPPY SUCCESSFUL Free- Market Buying, Selling Trading! , - 9: 00am * * * municipal & estate truck/ equipment surplus & seized asset auction! Find great deals on eBay for manual polaris slt 700.Shop Service Manuals in Maintenance at the Polaris RANGER store. Find great deals on eBay for repair polaris slt 700. Mar 01 · Next Post > \" I Know You’ re Sick of This, But Indulge Me These Last Final Logo Contenders.\nThe production version would become the Aero Commander 520, a five to seven seat twin engine executive aircraft design. Polaris SLT 780 Service Manual;. We are 100% Australian owned and proudly independent. We are # 1 quality trucks cars an Rv' s. If you’ re researching the best mirrorless cameras, you’ re definitely not the only one. Clymer Marine troubleshooting , PWC manuals are the # 1 source for DIY maintenance repair.Autos en venta Volvo en Los Angeles. Polaris slt 700 jet ski manual; polaris slt 700 torque specs;. 1- 16 of 230 results for \" slt 700\" Did you mean: salt 700.\nWith step- by- step procedures combined with detailed photography extensive use of exploded parts views Clymer manuals are a must- have tool for the do- it- yourselfer. If your vehicle is currently supported with online ordering, you will be redirected to the brand specific website. In mirrorless cameras are still a very hot topic . New battery finder out now.\nNew ( Other) $ 120. Elektro und Elektronik - Allgemeines Themen Beiträge Letzter Beitrag; Elektronik Allgemein Alle allgemeinen Themen zu Elektronik. * * * 9: 00am - in- op/ salvage vehicles - 60+ units.\nPolaris slt 700 service manual. Complete auction service since 1956 26th annual western kansas consignment auction farm equipment industrial / construction equip. 200 - Chrysler: 3 Series - Bmw: 350z - Nissan: Acura - ILX RSX, TLX, TL, RLX, RL, MDX, Rdx Tsx: Airstream -.\nPolaris slt 700 service manual. Shop - trucks - irrigation.\nSmathers Libraries, University of Florida also available. You are buying a PDF Service & Shop manual for a Polaris SLTThis PDF service manual will show you every nut and bolt on your vehicle.\nR & J Batteries is one of Australia’ s largest battery and oil distributors. Anuncios para venta de carros usados baratos. Personal Watercraft\" service and repair manuals. Research compare vehicles, calculate loan payments, find local dealers, find your car' s book value get a service estimate at Autoblog. WELCOME TO HANIGAN AUTO SALES in EMMETT, ID. GVRYwkVGcdacDyDEQU org/ connect/ topic/ rubank- intermediate- method- flute- or- piccolo- pdf- epub- mob ( 98).\nCity and County of Denver - Colorado | Charleston County - South Carolina | Dauphin County - Pennsylvania | Cass County - North Dakota. Clymer Manuals Polaris Water Vehicle manual.\nIf searching for a ebook Polaris slt 700 service manual in pdf form, then you' ve come to the faithful website. Autoblog brings you automotive news; expert reviews of cars crossovers , pictures , SUVs; , trucks video. Additional Physical Form: Electronic reproduction of copy from George A. 5 Radio Shopper Caller List- Call- in # ' s: AND. Notes Additional Physical Form: Also available on microfilm from the Library of Congress, Photoduplication Service. Trocas y camionetas marca Saturn en venta. I have run the diagnostic and i am getting a blink code 25.\n1996 Polaris SL SLT 700 Service Repair Shop Manual Supplement FACTORY OEM BOOK x.\nAge of empires 2 age of kings download torrent tpb\nService Manual blade\nThank you all for your patience, the website and forums are back in business! Things should be back to normal now, but if you notice anything fishy please let us know! search titles only has image posted today bundle duplicates include nearby areas ames, IA ( ame) ; ann arbor, MI ( aaa) ; appleton- oshkosh- FDL ( app). 66 Vision Tech Co. was established in 1956 as a professional manufacturer of ophthalmic instruments, is mainly engaged in R& D, manufacturing, sale and service of ophthalmic devices.\nSunday, 22 April. It' s Time To Rethink The Value Of PhD; Nutson' s Weekly Automotive News Summary April 16- 22, ; Cadillac Under New Management; Higher Octane Regular; Earth Day ; Hotcakes Selling Like Mustangs; Maybach SUV In China; Kia Tech; Toyota Tech; VW Navistar?", "label": "Yes"}
+{"text": "Separate names with a comma.\nDiscussion in 'GS Boxers' started by Dorsicano, Feb 3, 2011.\nAlso looks like that to me, there should be some weird optical ilusion\nTo me, it looks like R 1000GS.\nI disagree, The Ducati, despite the marketing hype, is not a Dualsport bike. And on a bike that needs to perform offroad, off idle smoothness and torque far outweigh sales team driven HP & top speed numbers. Lets hope BMW isn't foolish enough to try and compete with a bike that is not it's competition.\nRide the Multi, and while they have 'numbers', it's a far cry from being refined or feeling like you want to spend time in the saddle. Off-idle fueling is notchy at best (and often posted in Ducati forums), and at the risk of sounding 'old', I just don't see the need for the power in a DS.\nThe GS was/is about refinement and I'm sure BM is doing their due diligence on this model. But if it comes out to be more road-oriented, I wonder how many people will go Orange. Which is another can of worms.\nIt will still be a BMW GS, but it will have higher HP, better brakes, and more road oriented design features. I'm not espousing theory here; just look at the prototype pictures. The Multi is a better road bike by most measures, and I'm sure BMW isn't happy about that. Most likely their goal will be to keep the GS's off-roading ability while matching the Multi on road.\nI can't disagree that 'if' or 'when' the Multi is tuned and does its best it's better on-road. It's just that there have been lots of teething pains with Ducati's 20K+ bike.\nI guess it depends where BM decides it wants to focus. Road, and chasing sales numbers (which is somewhat understandable). Or staying true to the lineage of a G/S even if it's a water cooled bike.\nThe radial brakes on the test mule's forks tell me the answer.\nProbably about the same amount that go Orange right now, a virtually unrecognizable blip,\non the radar screen of GS sales.\nIf it has 30 more hp, same torque down low, weighs the same, fits tall folk and doesn't have cruise, I want the adv version please.\nIt looks like the cylinders are kinda high up on the engine.\nMaybe a unitized engine and transmission ?\nMaybe a wet multi-plate clutch ?\nPerhaps. . . .for now. Once a watercooled G/S is out, what's the difference between a KTM or a GS besides the shaft drive? I'd wager there would be a considerable number of people doing serious looking once the H2O version is deployed.\nHmm, No Mickey Mouse ears....F800 style mirrors.....\nThe stalwart few, that never bothered purchasing a HP2E in the first place, but still revere it's image / memory, like a Porsche enthusiast's 959 garage poster, perhaps. Outside of that, I feel you're waxing poetically / lamenting generational change, for changes sake.\nSome additional weight and technological sophistication, will not turn BMW's cash cow GS series, into a festooned roadie. It's not to say that for a few, the additional pounds won't interfere in hard core off road use, but those owners are still truly an extremely small percentage, of GS buyers.\nThe only thing a considerable number of people will be doing, when this bike is released, is lining up in droves to buy them. Feel free to pm me, if KTM's numbers go through the roof at the same time,\nI'll buy you lunch.\nAs to weight, look at it this way: It could gain 30 pounds and still be lighter than the beloved 1150.\nI'm curious: Why would radial mount brakes make them less off-road capable?\nBMW knows that, despite the hairy chest beating on forums like this, that most of the miles that GSs do is road miles. They are used as very comfy road bikes with good real road performance. They are used a lot less on dirt than people admit.\nThe Multistrada challenges that market, so BMW wants to up the ante. GSs are an aspirational bike, sold on the dream of crossing deserts and mountains and shit.\nJust like the vast majority of Land/Range Rovers and other SUV's clogging the freeway.\nIs it just me, or does anybody else see painted plastic covering the entire gas tank?\nAlso, I am like some others in reguard to the gs, gsa, being to big and really to nice and expensive of a bike to really take off road. I have done it on three occasions, no trails, just gravel with a little dirt where the gravel had sunk into the dirt, but the whole time praying that I did not drop it. The gsa did just fine, but I finally wised up and purchased a DR 650 for all of that.\nBut it is nice to know that you can. I have a GSA and out of its 30k it has done maybe 10% on dirt/mud roads. But I am proud of that 10%.\nright. also look at the beak...very good camouflaged.\nBMW is a genuis in disguising their vehicles.\nEver thought this could be a 5 series? Looks more like a Rover to me\nThe same with the bikes.\nThe big areas are all not productionready. But some details like the brakelight, indicators etc look finished.\nBut gastank, and instumentpanel etc aren't the real ones.\nThe other player that needs to be given consideration is Triumph, they clearly have their sights on BMW. First the Tiger 800XC and soon the Tiger Explorer. Take a look:", "label": "Yes"}
+{"text": "Keep moving with these tips on maintaining cars and bicycles\nSymptoms: Applying the brakes causes a screeching or grinding noise. When braking at high speeds, occupants of the car may feel vibrations.\nDiagnosis: Some brake pads have warning tabs that chirp when your brake pads have worn down too far, says Keith Harris, owner of Bexley Auto Repair Center. \"If you hear any kind of screech, you should obviously get it looked at,\" Harris says. If you hear grinding, he says, \"that means you need to get it in, like, right now.\"Cost: New brake pads may cost between $50 and $70. If you also have to replace the new rotors, which Harris generally recommends over resurfacing old ones, the cost will approach $300, including parts and labor.Car Heater\nSymptoms: The blower works only on the higher settings.\nDiagnosis: When your blower doesn't work on lower speeds but it still works on high, it's almost always because the resistor has gone bad, says Alternative Auto Care's Chris Cozad. These resistor assemblies tend to burn out over time, she says.\nCost: $25 to $50, plus laborLights\nSymptoms: When turn signals start to fail, they will blink quickly to let us know, but most people don't know they have a brake light out unless someone tells them.\nDiagnosis: If the lights are flashing quickly, it usually means a small bulb is out, she says. If one side goesout, Cozad will usually recommend replacing the other, too, since \"it's not unusual to have one fail relatively shortly after another.\"\nCost: Most brakelight bulbs costs $3 to $6. The cost of labor varies, but it's typically quite low or even free. Cozad notes it's difficult to access lights in some European cars, which can drive up costs.Tires/wheels\nSymptoms: One of your wheels is wobbling.\nDiagnosis: If you notice a tire wobbling back and forth, the cause is probably a bent wheel or, possibly, a separated tire, says Mike Paul of E.T. Paul Tires. \"Sometimes people will hit the brake, and the steering wheel will shake. Chances are that you have a rotor that has been warped,\" Paul says.\nCost: Having a wheel straightened will usually cost between $100 and $150. A new wheel, depending on the vehicle, could range from $100 to $1,000.Windshield\nSymptoms: Windshield is cracked, chipped or scratched\nDiagnosis: As a rule of thumb, if the crack will fit under a dollar bill, it can be repaired, says Paul Syfko, global repair development manager for Belron, the parent company of Columbus-based Safelite.\nCost: Most insurance companies will cover the cost of repair if the damage is smaller than 6 inches, says Safelite spokeswoman Jenny Cain. The cost of a repair starts around $100. The cost of replacement typically starts around $200.Bicycle wheels\nSymptoms: The wheels are untrue, which becomes apparent if the rim, when rotating, moves away from and closer to the brake pad, says Trent Saksa, a bike mechanic at Paradise Garage. In extreme cases, the tire rubs against the brake pads, preventing a rider from being able to adjust the brakes.\nDiagnosis: Wheel truing requires specialized tools. \"If you haven't been reading a manual about how to tune up bikes,\" Saksa says, \"then you probably wouldn't be able to do it.\"\nCost: $15 to $18Bicycle ball bearings\nSymptoms: You notice strange noises, such as a grinding sound, and it feels like sand is in your wheel.\nDiagnosis: If turning or just riding feels rougher than usual, you may have a ball bearing problem, Saksa says. He explains the problem could be in the headset, bottom bracket or the wheel (all of which hold ball bearings). Usually, bearings either need to repacked with grease or replaced entirely, Saksa says.\nCost: $2 to $30 to replace ball bearings; full tune-ups start at $59", "label": "Yes"}
+{"text": "1994 lexus alarm is going off, i need to reset or bypass it\n1994 lexus alarm is going off, i called the dealership and they said to put the key into drivers side door and lock an unlock 4to 5 times to reset it.. im still having the same problem.. any ideas on maybe bypassing or resetting the alarm??\n- If you need clarification, ask it in the comment box above.\n- Better answers use proper spelling and grammar.\n- Provide details, support with references or personal experience.\nTell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.\nTip: The max point reward for answering a question is 15.\nI think that's the alarm system as well.the most important thing is the alarm system is still working?step out yr car try to use remote key to lock n unlocked,if that's working.i don't worry at all.lock n unlock are alarm system reset itself.should be normal,battery is super low or dead .good luck for u\nThanks for choosing FixYa and welcome to the site. The alarm is causing all the problems. You need the code to reset the alarm system. It is possible that it may be in your owner manual. If not, you are going to have to call the dealership to get the code. Before you call, you need to make sure you have your VIN number and any other information on the vehicle. Some places make you come down to the dealership to get the code. Once it is reset, everything else should work again.\nDo you have anti-theft system bypass module installed? Transponder key bypass? Try unlocking the doors with your factory Jeep remote (turns off alarm) and leaving the gray transponder key in the ignition cylinder. Then try activating your remote start. Sounds like one of the factory anti-theft systems is still active. Basically if the car's computer doesn't want it to run, the car won't run. You have to fool the car into thinking it is OK to start and stay running without the key and anti-theft device deactivated. You need to leave a transponder key in the vehicle under the dash to bypass that system. You can get a generic one for about $20. You MUST have 2 original gray transponder keys in order to program a third. There is a sequence of putting one key in the ignition, then the second, then the new blank key so the cars computer knows to allow that key also. If you do not have 2 original keys, then you need to go to someone that can program properly like dealership or some locksmiths or alarm shops. Then they usually charge about $100 for a second key. You don't have to have the key cut. That way if someone finds the spare transponder key in the vehicle, it wont turn the ignition cylinder. The anti-theft bypass module (factory alarm bypass) runs about $25. Bulldog Security or JBS model 791 should work for your vehicle. If you live in an area where car thefts are common, you may not want to bypass these factory security measures. Hope this information helps.\nWhen alarm goes off,put key in ignition and turn,the alarm should go off and alarm should be reset.Or,remove positive battery cable,wait 10 minutes,reconnect,when you open door,alarm will sound,insert key in ignition and turn key and alarm should go off and alarm should be reset.\nI have the same model.you must do this .put key in door turn it left and right 3 times .then when you get in put key in ignition turn it 3 times left and right .now start your nice running jeep.thanks Ed\nthat is one thing that the dealer only can do the key has a special chip in it to keep from it from starting or go to the dealer with ur title and and ask them for a key to reset the alarm cause it is causeing ur car not to start it's called a pats system\nI had same problem, when a door lock broke, the car thinks it has been broken into once the alarm goes off. Mine started going off randomly when this lock broke. You have to reset the alarm system, with my 1990 Acura it was reset finally by putting key in door lock and turning key back and forth 3X. In my car, it was OK to do the key in door lock cycle in the passenger side door lock, but Acura dealer told me not all Acuras will reset it via passenger side key cycling, some require driver door lock key cycling only. I was lucky since my driver side door lock was currently useless, that my car allowed it to be done by key cycle on pass. door lock. But try that and if it doesn't fix it, just call acura dealerships until someone tells you the right answer. In my situation it took 3 dealerships with 3 different answers until this was the right one for my 1990 Legend.\nPS I was told you can't disable alarm since it is all integrated into the battery and starting system, but read on another post that someone disableld theirs by disconnecting the horn.", "label": "Yes"}
+{"text": "Celica GTS vs. Prelude\nCelica GTS and Prelude go at it, they were both basically stock. They just\nhad an intake, the celica has a TRD Exhaust thats aboout it.\nIt was a best out of 3\nToyota Supra Turbo vs. Lamborghini Gallardo\nDisclaimer: All runs performed in Yugoslavia.\nSynopsis: Impromptu racing between a modded 2006 Lamborghini Gallardo and a\nmodded Toyota Supra in the dangerous streets of Yugoslavia. Got a 25-80\npull, 45-130 pull, and a 45-110 pull. However, in the last two runs, I let\nthe Supra spool before taking off. Mods and other information are below:\n- catless Exhaust (LOC +Fabspeed\n- 125 lb weight reduction\n- one passenger\n- 6 speed manual\n- approx. 450awhp\n- Greddy T78 turbo @ 16 PSI\n- Supporting Modifications\n- 750cc Injectors\n- No passenger\n- Auto transmission\n- approx. 460rwhp\nPlease subscribe if you enjoy cars, exotics, racing, and film-making.\nPlease note: Since this was an impromptu race, I did not bring my HD camera\nor GoPro HeroHD setups. Therefore, only my intro scence is 1080P HD and\nthe rest is crappy 640x480 iPhone 3GS footage rendered to 1080P HD.\nSubscribe and this race will go down again with a full camera setup and\nalso the Supra getting more mods!\nMusic - Custom Created in Sony Vegas Pro 9 using VideoCopilot's Pro Scores\nB20 Launch Control\njust playing with the launch control, engines a high comp B20 Vtec running\n230bhp 12.5.1 comp Jun stage 3 cams\nevo VII accelerating\nmy humble evo VII accelerate...HKS hi-power full Exhaust system with HKS SSQV and Tial\nwastegate...watch in HQ..turn up ur speaker volume..\nLexus ATC vs. Audi Quattro vs. Acura SH-AWD\nAWD comparison test at AET (Automotive Enviro Testing) in Baudette,\nMinnesota. Audi's Q7 Quattro (TORSEN Torque-Sensing AWD) versus Lexus\nRX350 ATC (Active Torque Control AWD) versus Acura's MDX SH-AWD\nAudi V8 vs Honda Prelude\nAudi V8: 280Ag ~2500kg automatas (pilnas ekipazas+pasikrove isvykai)\nHonda Prelude 100AG ~1400kg mechanine", "label": "Yes"}
+{"text": "Horner: 'Max fought as hard for P7 as he would for the win'\nPublished on 03 July 2022 by Bryan van Berlo\nChristian Horner, Team Principal of Oracle Red Bull Racing, reflects after today’s British Grand Prix: “It was a phenomenal performance today from Checo after the damage he sustained to the front wing end-plate on the first lap, we had to change the nose and his drive back through the field was just sensational. He benefitted from the safety car which enabled us to put on a fresh set of tyres, but his pace and race-craft was just exceptional.”\n“For Max, he’d taken the lead and was in a commanding position but unfortunately some debris did a lot of damage to the floor of the car which lead to a massive loss of downforce. It was unfortunate because I think it would have been a fantastic race for him today, but every point counts and he fought as hard for P7 as he would for the win.”\n“The biggest result today is that all drivers are in reasonable shape considering the scale of the crashes we saw today and we hope to see Alex and Zhou fighting fit in Austria next week.”", "label": "Yes"}
+{"text": "Auto Driver has companies who specialize in providing car insurance to drivers with a less than stellar driving record. Don’t drive without car insurance! Auto Driver can help you get bad driver car insurance today!\nGet matched instantly with up to 20 insurers in your area. Shopping made easy.\nWe suggest choosing at least 3 companies to find one that works best for you.\nComparison shopping can save you hundreds of dollars or more.\nAutoDriver enables you to compare car insurance quotes through all in one streamlined platform, and save money on your car insurance policy. Instant auto insurance savings are within reach!\nWe’ve helped over 2 million people find car insurance in your area\nDrivers that compare car insurance rates with us save an average of $369*\nGet car insurance quotes from 15+ providers in just 2 minutes or less\nValid License? You’re Covered. No License? No Problem!\nGet Free Cheap Quotes Instantly And Stop Overpaying\nCar insurance rates always vary depending on many factors, which is why it’s always critical to shop around for affordable car insurance. Several times it happened, a company offered you the best rate may not be the best company for you anymore.\nFactors such as marriage or buying a house, bad driving record, incidents like an accident, DUI and tickets, can have a high influence on your insurance rates. When you find your rates are going way high – it could make sense to switch to an insurer with cheaper coverage.\nBest rates from top insurers starting from $29*/month\nOur quoting service is 100% free, so comparing quotes won't cost you anything\nNo Agents, No Hassle. Save Up To 30%* on insurance\nThe quoting process uses the same standardized questions insurers use\nWe’ve already helped millions shop for car insurance\nShop directly with one of our partners.\nIf you have several accidents and tickets recorded in your driving history, bad driving auto insurance is the only choice. You are therefore considered as an high risk driver. Here’s some other reasons-\nRates and information are at your fingertips at Auto Driver!\nDiscounts might be available to residents of Virginia State. Our comparison tool brings you 15+ personalized car insurance quotes from all the top insurers in your area", "label": "Yes"}
+{"text": "I am the second owner this car has not been used in foul weather.\nThe car was kept in a climate controlled garage.\nCar does not currently need any service. Everything works.\nLook at the pictures of the underneath The car is shiny underneath. Look at the wheels.\nThe vehicle had a fresh ceramic coating last fall.\nThe vehicle has never been driven in foul weather. it did get caught in a couple of rain storms on the way home.\nThere is one tiny little nick on the left side of the rear bumper look for the picture (towards the end of pictures)\nThere is also a picture of some “driveway rash” at the very bottom of the front bumper see picture it looks bad but hardly visible when viewing the car.\nThere is simply no way of describing how clean and original the car is.\nI am a collector I pictured some of my other cars in front of my home I drive this car when I feel like touring with the top down.\nI love the car but I simply do not drive it enough.\nI purchased this car a year ago with 9,000 miles. The last owner was also very fussy. He is elderly and purchased it new.\nCompare this to cars with bad service history, auctions, paint work YOU GET WHAT YOU PAY FOR.\nPlease make all offers using the E bay system.I want $500 in paypal when your offer has been accepted If you cannot pay in 7 days please specify with your offer.\nDealers feel free to make offers but you already know the car is worth the asking price. Please make a reasonable offer and you will own it.\nThis is your chance to own a very special car with an excellent history.\nThere are no reviews yet.", "label": "Yes"}
+{"text": "I could be mistaken, but I believe the fancy D80 was developed for the racin' buggy crowd. I know the one under the ass of my truck ain't got nothin' to do with a JK.\nActually Iím pretty sure the Dana 80 axle was originally designed for use in dually trucks dating back to about 1988\n2012 JKU Rubicon - Build Thread -\nTo view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.", "label": "Yes"}
+{"text": "RMK Vehicles electric motorcycle company with lead designer Teemu Saukkio is going forward with production and homologation process for their new 50 kW bike.\nTeemu Saukkio shocked with response towards his first DIY Emoto build, he opened RMK company with partners and went ALL IN to work 100% on new electric vehicles all day long.\nTeemu Saukkio and his first electric motorcycle\nCarefully planned, RMK Vehicles are slowly preparing for prototype production.Teemu sent this images to us.\nHubless electric motorcycle specifications:\nThe motor is going to produce 50kw\nThe voltage of the drive train is 120v ish We will be using 18650 cell lithium ion cells\nTorque is calculated to be 320 Nm and that’s not off the line torque.\nWe are estimating the range to be 200-300 km whit the basic battery setup. but changing the cell type it can be raised higher.\nIt has the top speed of 160km/h its been limited to that to make everyone life easier?\nThe bike itself is a bastard child of a naked sportbike and wide handlebar Harley Davidson kind of bike. it looks like its a sports bike but it is not.\nThe frame is made of aluminum and the seat frame is steel tube and sheet metal construction.\nWe are aiming for mass production and it will start after we get the EU type approval for it.- Teemu Saukkio\nInteresting thing is that Teemu just filled patent for rear hubless electric motor.\nThe design is his own, manufactured with partners from Finland.\nMore from the website:\nRMK Vehicle Corporation is a new Finnish company and a motorcycle manufacturer.\nWe will launch our first model E2 during this year (2018). At the MP 19 Motorcycle Show in Helsinki, Finland, we will release the E2 series production version.\nE2 series production version\nView this post on Instagram\nIncredible new Electric motorcycle BLDC motor in new RMK motorcycle Check out: @rmkdoesstuff @ebike_eu @evnerds Evnerds.com . . . . . . #ride #electricvehicle#rideordie #harleydavidson #motorbike #motorcycle #motorcycle #custombike #motorcycles #bikeporn#designlife #kustom #kustoms #designlovers#designlove #electricbike#instabike#motorider #riders #caferacer #caferacers#caferacergram #caferacerporn#motor#motors #engineering #engine #engineer\nThe E2 is an aluminium frame electric motorcycle. Its modern design stretches the limits of a traditional motorcycle design.\nThe E2’s operating range on a single charge is 200-300 km. It takes 2-3 hours to fully charge an empty battery. It is possible to purchase E2 with two different types of batteries. The basic model is rated for 200 km and the bit more expensive model for 300 km on a single charge.\nThe E2 is equipped with a non-centered rim. The integrated electronic motor has been designed into the frame of a rim. The motor has a computational peak output of 50 kW and a torque of 320 Nm. The speed is limited to 160 km / h. We share pictures, videos, and more information on our websites and social media, because we believe that trust and transparency play a vital role in our business. The estimated price of the bike is 24 990 euros.\nA large-scale manufacturing will begin after the EU type approval is granted. The first bikes are sold at a fixed price, pre-registered in Finland.\nIf you wish, you can reserve a motorcycle with a prepayment of EUR 2000. Motorcycles are delivered in the reservation order. You have a possibility to cancel your reservation and to have your prepayment repaid in full. At the beginning of deliveries, you will receive an e-mail with a more accurate delivery time and instructions on how to pay the final balance. Your prepayment is deducted from the total price of the bike. – RMK\nWatch out for this guys, they are not playing", "label": "Yes"}
+{"text": "- Please test fit items prior to any painting services, any products that are painted void warranty.\n2011-2016 BMW F10 5 Series Msport Sedan 4-Door or Mtech Bumpers only (Will not fit GT Models)\nonly fit bmw factory original bumper,will not fit aftermarket bumpers\nPainted Black & Alpine White III #300\nx1 Front Bumper Lip", "label": "Yes"}
+{"text": "AUTOWEEK GIFT GUIDE\n« Back to Article\nVolvo has been listening to its American admirers. That's why next year we're going to get the fastest and most powerful wagon in Volvo history. Yes, it sounds like a good chunk of Volvo's U.S. fan base is made up entirely of automotive...\nPlease complete the following information:\n[example: email@example.com, firstname.lastname@example.org]\nThe information entered on this page will not be used to send unsolicited e-mail, and will not be sold to a 3rd party.\nREMINDER: For commercial reprints and web links please contact Lisa O'Brien at 313-446-1678.\nOther Recent Articles\nPOLL OF THE WEEK\nYour Magazine Subscription\nAll Content © 2013 Crain Communications, Inc.", "label": "Yes"}
+{"text": "Car Window Replacement Near Me Upper Saucon PA\nWe Can Arrive in Just a Couple Hours!\nGet our professional technicians at your door within hours for most jobs.\nWe are often in Upper Saucon or are close-by so we can handle your glass repairs quickly. We deliver fast glass repairs for all kinds of vehicles. We service Upper Saucon and all close-by communities in PA.\n- Friendly, trustworthy & experienced technicians\n- 24/7 mobile assistance\n- Free consultations\n- 100% satisfaction guarantee\n- Written pricing, up front, no add-ons\n- All makes and models of vehicles\n- We come to your location\n- We work with your insurance company\n- Customer service is our top priority\nWindshield Repairs in Upper Saucon Pennsylvania\nYour car's windshield does not belong with the mystical, under hood components. While we do not give windshield a lot of thought, they are very crucial.\nWindshield glass is a type of laminated glass. They are composed of 3 layers, two outer layers of composite glass and a middle laminate layer.\nIn many cases the inner sheet is made of vinyl plastic. The vinyl plastic sheet has glue on both sides, adhering to the outer layers of glass. This is the grounds of how laminated glass is constructed. It will prevent a windshield from shattering into harmful glass shards.\nOriginal manufacturer's windshield installation is a highly automated and computer-controlled process in the assembly line of car assembly. The fit and moulding is incredibly tight. This is due to the advanced alignment and the preciseness of the robots. Learn more about Upper Saucon window replacement cost from your local repair professional.\nAt any time there is damage to a car's windshield, it needs to be repaired as soon as possible. Due the tight installation method as described previously, the very best strategy is to have the repair work done on the original windshield, in place. So long as the damage is small, like a small chip or crack, this is practical. This is not feasible if the crack has elongated, if the chip is in the driver's field of view or the chip is wider that a coin.\nThere are many windshield repair kits on the market that handy individuals can use to fix their own windshields. If you are not comfortable accomplishing this yourself, then we advise visiting a windshield service center without delay.\nSome people question the benefit of a chip repair. This is a bad approach. Little chips can quite easily develop into larger issues that require a complete replacement.\nUpper Saucon Windshield Replacement\nWhen the damages to your windshield is considerable, you will need a replacement windshield. Windshield replacements are significantly more relevant for glass with cracks progressing completely through most of the window. Basically, when the crack is too large to fixed, the windshield will have to be removed and new one will need to be installed. Learn more about windshield repair in Upper Saucon 18034 here. A new windshield ultimately returns the functionality and safe operation back to your car. Under these scenarios, a replacement windshield is the absolute most suitable choice.\nUpper Saucon Emergency Auto Glass Repairs\nA damaged car window or windshield is a significant nuisance. Furthermore, the problems may so extensive that your car is not lawfully driveable. So if you need speedy, dependable auto glass replacement services in Upper Saucon, Pennsylvania, you have come to the best spot. We offer timely service when you really need it the most.\nEmergency Service You Want!\nWe are the best glass repair service in #CITY. The repair work is performed quickly and our standards are high. This guarantees that you get the best repairs on your car. Safety is the top concern we have. We will not discharge your car until our service technicians are 100% confident that the repair is performed to our very high standards.\nPeugeot 106 Front Spotlight Smashed Replacement??? (Valeo Accessories)?\nHi Wondered If I Would Need Full Light Or Can I Just Get Glass Replacement For The Spotlights( Situated Below Full Headlights) The Makeis Valeo And Wondered If Anyone Else Has Used A Good/Bad Car Parts Replacement For This Kind Of Item...\nValeo is just one brand. You can also buy a INFASA or SEIMA brand. The only difference is the glass lines pattern on the surface. The MOT doesn't car about this, just the alignment of the beam.\nOnly a breaker yard would sell just the glass. Otherwise stores sell the whole headlamp.\nSilicone the new glass in place.\nCost To Repair A Power Side View Mirror?\nI Drive An '01 Toyota Corolla And I Hit A Pole, Knocking Out The Glass Panel For The Side View Mirror. They Are Power Mirrors... I Have No Idea How To Fix It, So I Would Have To Take It Into A Shop. Does Anyone Know How Much That Usually Runs For - The Replacement Piece And Labor?\nIf you just popped out the glass napa can order a new peice,If ya busted it off the car you can get a used one for a car that old probably about 50$ you pop off the triangle trim on the inside of the dood unbolt it 3 10 mm bolts may have topull the door panel loose unplug it and put the new one on.If its just the glass napa can order it for you .don't know where you live but the number fo the one by me is 530-541-1853california\nHow Much Does It Cost To Replace The Front Windshield Of A 2002 Hyundai Sonata?\nI'M Not Sure If It'Ll Need To Be Replaced But That'S The Worse Case Scenerio...\nI usually pay......$135 to $ 165......you can buy a new one and place it your self....$85\nThe glass shops will come to your place....and replace the glass right on the spot....in about 25 minutes. This type of replacement is usually very competitive.\nIn shops and new car dealers....they usually just call the guys to come change it out and tack some extra bucks.\nCheck with your insurance, if rocks on a freeway while driving broke it....they pay $225 to $ 290.\n(a car dealer)\nI Had My Car Front Windshield Replaced. Now My Driver'S Side Wiper Goes To Far And Bangs Into The Side Of The?\nCar. What Could Cause This? I'M Calling Monday To Let Them Know, But If It'S A Simply Fix, I'D Rather Just Fix It Instead Of Waiting For Them.\nOperate wipers at lowest speed. Turn the key off when they are at their maximum reach. E.g. when the drivers side is banging into the windscreen trim.\nLift up the plastic cover cap on the pivot point of the wiper arm. E.g. at the lowest point of the arm. There should be a bolt or nut that retains the arm onto the vehicle. If you pull the arm directly away from the windshield, it should spring up and stay away from the wind shield. Now remove the retaining bolt or nut. Gently remove the arm and replace it back onto its splined shaft so that is is a little bit further away from the edge of the windscreen. Put retaining nut bolt back.\nAlternatively, If you aren't confident you can accomplish this, take the vehicle back to the idiot who did your windscreen and tell them to fix their mess, and do a job properly or don't bother next time.", "label": "Yes"}
+{"text": "Shell: Custom-designed OE style ABS shell in gloss black finish. Grille: Full formed woven mesh adds elegant look. Grille insert built from 100% 304 stainless steel. Black textured powder coat finish on grille insert. Rivets: Elegant chrome studs/rivets enhanced rugged off-road appearance. Easy installation – replaces OE grille assembly. The item “08-10 Ford Super Duty F250 F350 Grille Rivet Black Stainless Steel Mesh WithShell” is in sale since Tuesday, April 10, 2018. This item is in the category “eBay Motors\\Parts & Accessories\\Car & Truck Parts\\Exterior\\Grilles”. The seller is “tidalauto” and is located in CA, USA. This item can be shipped to United States.\n- Brand: Tidalauto\n- Manufacturer Part Number: 4GOZOE\n- Interchange Part Number: Ford Super Duty grille\n- Other Part Number: Mesh Grille\n- Placement on Vehicle: Front\n- Surface Finish: Gloss Black/Black Textured", "label": "Yes"}
+{"text": "Our team studied on 49579 reviews available online for Top End Kit For 302, chose the finest ones and prepared Top End Kit For 302 Reviews for you. It was very difficult to shortlist the ideal Top End Kit For 302 from thousands of products online. However, We tried to make sure that you get only the Best Top End Kit For 302 from our suggestions. Check our listings-:\nComparison Chart for Best Top End Kit For 302\nWe’ve scanned 49579 reviews for you. If you are looking for the Top End Kit For 302 than this review article may help you.\n|1||Fel-Pro FS 7733 PT-2 Full Gasket Set||9.6||Buy On Amazon|\n|2||WISECO TOP END KIT 77MM 13.5:1 KAWASAKI KX250F KX 250F 2007-2008||9.4||Buy On Amazon|\n|3||Topteng Motorcycle Cylinder Piston Kit||9.4||Buy On Amazon|\n|4||Just Add Karma||9.2||Buy On Amazon|\n|5||Speedmaster PCE435.1027 Ford SB 289 302 Hydraulic Roller Top End Engine Kit||9||Buy On Amazon|\n|6||2 Barrel Carburetor Carb 2100 Carburetor 2150 Carburetor Compatible with Ford 289 302 351 Cu Jeep Engine F100 F250 F350 with Electric Choke Mounting Gasket - 302 carburetor by BOOTOP||9||Buy On Amazon|\n|7||DNJ HGB448 Head Gasket Set with Head Bolt Kit For 1995-1998 for Ford Ranger 2.3L 140cid L4 SOHC||8.8||Buy On Amazon|\n|8||PCE by Speedmaster PCE435.1034 Fits Ford 351W Windsor Hyd FT 210cc Cylinder Head Top End Engine Combo Kit||8.6||Buy On Amazon|\n|9||Cylinder Piston Gasket Assemblies Top End Kit Compatible with Honda TRX350 Rancher350 2000-2006||8.4||Buy On Amazon|\n|10||402011 501001 500407 O-Ring Rebuild Kit for F350S F250s Paslode Framing Nailer||8.2||Buy On Amazon|\nTable Of Content:\n- Fel-Pro FS 7733 PT-2 Full Gasket Set\n- WISECO TOP END KIT 77MM 13.5:1 KAWASAKI KX250F KX 250F 2007-2008\n- Topteng Motorcycle Cylinder Piston Kit, Cylinder Piston Rings Top End Kit Set fits for Yamaha TTR 125...\n- Just Add Karma\n- Speedmaster PCE435.1027 Ford SB 289 302 Hydraulic Roller Top End Engine Kit\n- 2 Barrel Carburetor Carb 2100 Carburetor 2150 Carburetor Compatible with Ford 289 302 351 Cu Jeep Engine...\n- DNJ HGB448 Head Gasket Set with Head Bolt Kit For 1995-1998 for Ford Ranger 2.3L 140cid L4 SOHC\n- PCE by Speedmaster PCE435.1034 Fits Ford 351W Windsor Hyd FT 210cc Cylinder Head Top End Engine Combo...\n- Cylinder Piston Gasket Assemblies Top End Kit Compatible with Honda TRX350 Rancher350 2000-2006, Replace...\n- 402011 501001 500407 O-Ring Rebuild Kit for F350S F250s Paslode Framing Nailer\n1. Fel-Pro FS 7733 PT-2 Full Gasket Set\n- Full Sets contain all the gaskets and seals necessary for a complete engine overhaul\n- Meets or exceeds all original equipment specifications\n- Application specific design to ensure a perfect fit\n- Engineered for the sealing repair environment\n- Unsurpassed quality you can trust\n- Fit type: Vehicle Specific\n- All gaskets of premium quality\n- All in one affordable set\n- Everything you need for complete engine rebuild\n- 1 Year manufacturers warranty\n2. WISECO TOP END KIT 77MM 13.5:1 KAWASAKI KX250F KX 250F 2007-2008\n- Offroad 4-Stroke > ENGINE > Pistons > PK KIT\n- Application: KX250F 07-08\n- Wiseco Piston PK KIT PK1598.\n3. Topteng Motorcycle Cylinder Piston Kit\n- Please confirm the part number before ordering. A complete top end kit is offered.\n- Engineered and Tested to Meet or Exceed Original Equipment Standards and Performance.\n- This kit is designed specifically for the DIY (Do It Yourself) mechanic.\n- Forged Piston With 11:1 Compression Ratio.\n- The cylinder is cleaned, bored and honed to the specific clearances for the piston you receive in the kit.\n4. Just Add Karma\n5. Speedmaster PCE435.1027 Ford SB 289 302 Hydraulic Roller Top End Engine Kit\n- Small Block…\n- Intake Manifold Height: 5.390…\n- 62cc Combustion…\n- 210cc Intake…\n- 2.020 in. Intake…\n6. 2 Barrel Carburetor Carb 2100 Carburetor 2150 Carburetor Compatible with Ford 289 302 351 Cu Jeep Engine F100 F250 F350 with Electric Choke Mounting Gasket – 302 carburetor by BOOTOP\n- New Carburetor Two 2 Barrel Carburetor Carb 2100 2150 Compatible with Ford 289 302 351 Cu Jeep Engine with Electric Choke.\n- Works with Ford Mustang Engine 289 cu in (4.\n- Compatible with 1964-1978 Jeep Wagoneer 360 Cu 5.\n- This item is a brand new Carburetor.\n- 2 Barrel Carburetor for Ford F100/F250/F350 with 289 302 may also know as 2-Barrel Carburetor,F250 Carburetor,F350 Carburetor,F100 Carburetor,289 Carburetor,302 Carburetor,351 Carburetor,351 Carburetor 2 barrel,2100 carburetor,2150 carburetor,2100 Carb,2bbl carburetor,302 carb,carburetor 2 barrel f100,2100 A800 carburetor,1969 ford f-100 carburetor,1981 ford f 100 carburetor,A800 carburetor,289 2 barrel carburetor,1978 ford f350 carburetor,Jeep Wagoneer carburetor,Carburetor for 302 Ford.\n7. DNJ HGB448 Head Gasket Set with Head Bolt Kit For 1995-1998 for Ford Ranger 2.3L 140cid L4 SOHC\n- THIS IS BRAND NEW: DNJ Head Gasket Set with Head Bolt Kit\n- FITS: 1995-1998 for Ford Ranger 2.3L 140cid L4 SOHC\n- FITMENT NOTES: HGS448 X1 / HBK447 X1\n- You are assured to receive a worldwide proven, quality part with OE quality fit and performance.\n- We carefully selected DNJ Engine Components as the sole provider.\n8. PCE by Speedmaster PCE435.1034 Fits Ford 351W Windsor Hyd FT 210cc Cylinder Head Top End Engine Combo Kit\n- 435 Cylinder Head Combo\n- Speedmaster creates unique & distinctive DNA items inspired by the blend of old and new technology.\n- TRACK PROVEN – Surviving the longevity of road, race and recreation is mandatory for all Track Proven products, Bringing you closer to product perfection.\n9. Cylinder Piston Gasket Assemblies Top End Kit Compatible with Honda TRX350 Rancher350 2000-2006\n- Compatible with: 2000-2006 Honda TRX350FE 4×4 ES TRX350FM 4×4 S TRX350TE 2×4 ES TRX350TM 2×4 S Rancher 350.\n- Replaces Part Numbers: 12100-HN5-670, 12191-HN5-670, 12251-HN5-671, 13010-HN5-671, 13101-HN5-670, 13111-HC0-000, 13112-HN5-670, 98069-57916.\n- Please check the OE Number before purchasing to make sure this is the correct part of your vehicle.\n- Cylinder Bore 78.50mm, 3.09inch. Cylinder Stroke 68.00mm, 2.68inch.\n- Warranty: For any reason, if you are not satisfied with your purchase, please contact us directly.\n10. 402011 501001 500407 O-Ring Rebuild Kit for F350S F250s Paslode Framing Nailer\n- 402011 501001 500407 O-ring Rebuild Kit for F350S F250s Paslode Framing Nailer\n- Part#500407 MAIN VALVE SPRING\n- Part#501001 CAP GASKET\n- Part#402011 SLEEVE SEAL\n- All the O’Rings in the Tool\n- First, our algorithms collected as much information available about these products from trusted sources.\n- We employed both Artificial Intelligence and large data volume to validate all collected information.\n- Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Top End Kit For 302 currently on the market!\n- Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.\n- Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Top End Kit For 302 based on that.\n- Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.\n- Customer Ratings: The hundreds of customers using the Top End Kit For 302 before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.\n- Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Top End Kit For 302 they used.\n- Seller Rank: Now, this is interesting! You don’t just need a good Top End Kit For 302, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.\n- Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Top End Kit For 302 before putting them on the list.\n- Durability: Durability and reliability go hand to hand. A robust and durable Top End Kit For 302 will serve you for months and years to come.\n- Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Top End Kit For 302 if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.\n- Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Top End Kit For 302 on the market, the products that got mostly negative ratings get filtered and discarded.", "label": "Yes"}
+{"text": "[Author Prev][Author Next][Thread Prev][Thread Next][Author Index][Thread Index]\nStuart Friedman wrote:\n> Winter storage procedures I last used on my 2002;\n> Try to run out as much of the fuel as possible,add some gas stabilizer\n> (Stabil) to the tank, run it another minute or so, shut it down (Stabil is\n> available at any small engine shop).\noooohhhhh boy. I would fill the tank as much as possible and add Stabil. This\nprevents condensation and rust come springtime.\n> Pull the plugs, squirt a tsp of motor oil into each cylinder, replace plugs.\nFor winter storage it may not be worth it, but it certainly helps. If its more\nthan 5 or 6 months go for it. Less than that, just start it once in a while if\n> Pull the battery, make sure you know the radio code if applicable\n> Carefully elastic band some paper, not plastic over the tailpipe, keeps the\n> rodents out.\n> Some advocate pulling the wheels/tires outting it on blocks. Never seemed\n> to be worth the trouble to me.\nYeah, i used to do that, then I figured it wasnt really worth all the hassle.\nOnly until my SP8000's did I never have a problem with that.\n> Close the doors on the first catch, leaving the pressure off of the rubber\n> ( I am not convinced this matters, after all the doors would be closed\n> 99.99% of the time if you were running it, but what the hell!)\nWill rodents get in?(reminds me of a story in AutoWeek some time ago.... Lexus\nwas testing the air tightness of their new cars. They would put a cat in the car\nand if the cat was dead the next day, the car was airtight. Chrysler following\nsuit put a cat in the car... the next day the cat was gone!!)\n- No Subject\n- From: Stuart Friedman <email@example.com>", "label": "Yes"}
+{"text": "Originally Posted by BJJ Boy\nAnd you miss spelt everyone's in you're title.\nAsskicker is referring to threads being started about reg repping. Whether to delete neg repping, do did it, why it's here, etc..\nWon't help to reply in said threads so just don't fuel the fire.\nLast edited by ruban; 05-22-2007 at 04:52 PM.", "label": "No"}
+{"text": "Robert Mahoney's house\nBy Champion3 @ 2012-08-24 13:02:18\nRobert W. Mahoney is the Chairman of Diebold, the largest American manufacturer of ATMs.\nPrior to joining Diebold, Mahoney was president of NCR Canada Ltd., responsible for the company’s activities throughout Canada.\n1.0 (1 votes)", "label": "No"}
+{"text": "Cycling is beautiful for its simplicity, but that doesn’t mean things don’t go wrong. When you’re out on a ride and you get a flat or your chain breaks, it shouldn’t mean the end of your ride. Although these things can be fixed with ease back in your garage with all the right tools (or at your local bike shop), it’s important to learn some of the most common on-the-road bike repairs that will come up. Being stranded miles from home is no fun, and although it may be easier to call for a ride home, you’ve got what it takes to do a quick fix and keep riding!\nTools to Bring\nYou should be prepared with the right tools on the road or trail and know how to use them should a mechanical or flat tire occur. The tools to bring are:\n- Spare Tube\n- Pump or CO2 Inflator with an extra cartridge just in case.\n- Tire Levers\n- Patch Kit\n- Multi-tool with a chain tool on it\n8 On-the-Road Bike Repairs\n1. Fixing a Flat\nIf you ride a bike more than just around town you should know how to fix a flat. Fortunately it’s pretty easy:\n2. Broken Chain\nBroken chains don’t happen too often when riding but when they do, you’re not going very far until you fix it. A chain will either break completely or a link will become kinked. To fix it, all you need to do is to remove that link.\n- First locate the broken link. There should be two plates that are loose, and flapping around or a link that has a bend in it. These are the ones that get removed. You do not need to remove the chain from the bike. Keep the chain threaded through the derailleurs if you can as it will save you time.\n- Examine the chain breaker tool. You’ll notice a circular cradle that the push-pin moves through. Rest the link in this cradle where the pin lines up with the push-pin of the link you’re removing.\n- Turn the push-pin to push the pin through and out the other side. If you’re using a master link, you will need to have both ends of the chain an inner link as the master link is an outer link. If you don’t have a master link or another connector pin, do not push the pin all the way out the other side of the chain. Leave it so the pin is over enough to remove the inner link but not so far that it falls out. This will be important in the next step. Now do the same one full link removed, one inner link followed by one outer link or vice-versa, from the pin you just pressed out with the broken link being in-between.\n- If you removed the chain from the derailleurs, thread it back through being sure that it’s going the right way. Then place the chain in the smallest gear in the back and rest the chain to the inside of the chain rings on the front against the bottom bracket to give enough slack.\n- Now install the master link if using one through both the inner links and lock into place. If you have a connector pin, line up the ends of the chain and press that through breaking off guide end with your chain tool. If using the same pin that you just pushed out and left on the outer link, line the end up and push the pin back in. You want it so both sides of the pin are flush with the outer plate of the chain. If you pushed the pin too far through when you were removing it, line the chain up in the chain tool and set the pin on the resting plate to then press the pin in. It may be a bit off at first but it should line up as you continue to push it through the hole.\n- That’s it. The link with the pin you just installed may be a bit stiff but if you bend it laterally slightly with your fingers, it should loosen up to where you can’t even tell which link it was. The chain is now one link shorter, unless using a master link, but will still be good to go.\n- One note is that reinserting a pin is now the week point of the chain. When you do make it home, take out that pin and put in a connecting pin which will better strengthen the chain. The problem is you may not be able to tell which link it was so it’s recommended that you replace the entire chain.\n3. Tire Tear\nA tear in a tire can end your ride. If it’s not extremely big however, you can fix it with a few little tricks. The first is the dollar bill trick where you fold up a dollar bill and place it between the tube and the tire where the hole is. This will only work if the hole is small enough. Once the hole is past a few millimeters in size, you are going to need a tire boot which should also be carried in your saddle bag. This rubber strip will be large enough to place over the hole and not allow the tube to poke out. The problem with both the dollar bill trick and the tire boot is that the tire can continue to split particularly if you’re on rough roads or terrain. Adding a piece of electrical tape in place of or in conjunction with, will help to hold the tire in place and not have the hole continue to grow.\n4. Broken Spoke\nFirst, you need to get the spoke out of the way so that it doesn’t interfere with your wheel turning. If you have a broken spoke on the front wheel, you should be able to just slide it out of the hub. If it’s on the rear wheel, bend the broken spoke around one of the spokes adjacent to it. Then you can adjust the tension on the rest of the spokes in your wheel.\nTo adjust the other spokes to accommodate for one missing spoke, you’ll need a spoke wrench, conveniently on many multi-tools, to tighten or loosen them by turning their nipples at the rim. Turn each spoke on either side of the one that just broke clockwise as if you’re looking from the hub of the wheel toward the rim. This will loosen those spokes. If this doesn’t move the rim back to center enough, ie. it’s still bouncing off the brake pads, go one more spoke in either direction and turn them counter-clockwise. This will tighten the spokes pulling the rim back toward the side of the broken spoke. fIf the rim is moving too far to the right, you’ll want to either tighten the spokes that attach to the left side of the hub or loosen the spokes that attach to the right side of the hub. You’ll make this decision by testing the spokes and determining whether they feel too loose or too tight.\nNever make drastic changes to the tension of a spoke at any one time. Just make half-turns with the spoke wrench each time and check and see how true the wheel is. It is easy to go too far. Once you get it roughly straight, you can ride the wheel. If the rim is still slightly touching the brake pads, open the brake quick-release to allow for more space. Once you get home, check out this article on how to finish up the repair.\n5. Broken Front Derailleur Cable\nWith a broken front derailleur cable you are going to be stuck in the little ring for the rest of the ride. With a triple chain ring, you might be able to turn the limit screws enough to line up the derailleur up with the middle chain ring but it depends on your derailleur and set-up.\n6. Broken Rear Derailleur Cable\nWith a broken rear derailleur cable you are going to be stuck in your smallest gear, normally an 11 or 12 tooth. To get the chain up to a bigger, easier gear, turn the H or high speed limit screw in as far as it can go. This should push the derailleur up at least a cog or two. You may have to back it back out a tad if it doesn’t line up well.\n7. Broken Brake Cable\nIt’s going to be rare that you have a broken brake cable as they’re made not to fail. If you’re riding anything other than perfectly flat roads without many intersections or traffic you might be able to gingerly make it home otherwise it’s best to get a ride and not risk needing to stop quickly and not being able to.\n8. Shifting Becomes Off\nA lot of times, particularly after a new cable is installed, your rear derailleur shifting will become slightly off. This is because the cable stretched ever so slightly. To tighten it, simply turn the barrel adjuster on your derailleur counter-clockwise a quarter turn until the pulley wheel lines up exactly with the gear. You won’t have to turn it much unless it’s way off.", "label": "No"}
+{"text": "Greater Comfort Leads To Greater Productivity\nYou bought a John Deere tractor expecting it to get the job done for years to come. And by adding simple tractor upgrades, you can work longer, harder and more comfortably than you did the first time you hopped in the cab. Contact your local John Deere Dealer for more information about the best upgrades for your tractor.\nLeather-Wrapped Steering Wheel", "label": "No"}
+{"text": "Problem: My gas furnace’s draft inducer starts, the furnace ignitor glows but the furnace never gets a gas flame. Do I have a control board problem or do I have a gas valve problem? I have checked my pressure switch and the pressure switch is closing when the draft inducer is on. How can I test the gas valve and control board to see which part is at fault?\nAnswer: Thanks for asking this question. First, I would recommend that you test to make sure all your safety controls are closed and the safety controls are allowing electricity to flow through them. The safety controls would be the pressure switch, which you have already tested, the rollout switches, and the limit switch. If any of the safety controls are open then the furnace will not operate. We have a really good post and Youtube video on testing safety controls on the following page: https://arnoldservice.com/problem-how-do-i-test-my-gas-furnace-rollout-switch-limit-switch-pressure-switch-and-flame-sensor/ I would like to suggest that you make sure that the gas valve and the furnace’s gas cock are turned on. If you have an LP furnace make sure that the LP tank is actually filled well enough. Make sure that if your thermostat has batteries that the batteries are in good condition. We have two really good YouTube videos below made by Gray Furnace Man that show how to test gas valves to see if the gas valve is getting power or not. If the gas valve is getting power and not opening then you more than likely have a gas valve problem. If the gas valve is not getting any power when it is supposed to be getting power to open then more than likely you have a control board problem. Below are two great YouTube videos that explain how to test a gas valve with a clamp-on meter and how to test a gas valve with meter probes. Thanks so very much to Gray Furnace Man for making these videos! If you have any questions please comment below or email us at email@example.com. We hope this helps you solve and fix your furnace problem.\nYou Can Search Our Site for More Troubleshooting Problems with Answers, Heating, Air Conditioning Parts and Supplies in the Google Search Box Below:", "label": "No"}
+{"text": "I adjusted the bottom stop and things looked good, but then I found that the bed was not level.\nI did try the plastic postal tape and it worked ok, but the ejector caught on it and ripped it up. That problem should go away.\nI also noticed that the heated bed started making bubbles under the plastic tape. I am not sure if it was due to the heat interacting with the glue, residual moisture, or just the tape itself.\nI will retry the plastic tape after get the bed leveled.", "label": "No"}
+{"text": "| Condition: || Used || Year: || 1973 |\n| Make: || Evinrude |\nGlastron Carlson 16' runabout with galvanized trailer. 115 Hp Evinrude 4 cylinder 2 stroke outboard. Electric start/electric choke. Lots of power. Engine just serviced with new spark plugs, impeller/ water pump and new lower unit gear oil. Gps reads 40-50 depending on water condition. New marine deep cycle marine battery. Engine has a self charging system to recharge the battery while running and also is set up with a 12v solar panel for extra charging while out on the water. The control panel has switch activated electric bilge pump, front navigation lights, anchor lights, interior lights, and two 12v charging ports for phones and accessories all wired to a safety fuse panel.Galvanized shoreline trailer with sealed bearing buddies. It has a new jack and carpeted side rail guides for easy loading at the dock and support while towing. Trailer tires and spare are in like new condition and are on galvanized rims. Submersible lights with side markers for night towing. Extra items included: - fish finder with depthometer- 2 ores- Anchor and line- Fishing rod holders - Tube towing apparatus- Two life jackets - Caution flag - Fire extinguisher- Dock bouys and extra line. - full new trailerable boat cover I have the paperwork for the boat and the trailer paid through 2018.", "label": "No"}
+{"text": "With the confidence of a mountain bike and the quickness of a road bike, this bike is ready for streets, paths or trails.\nThe all-new Giant Roam 3 is built for multi-purpose adventure, sporting the best qualities of both a mountain bike and a road bike. With front suspension, smooth and powerful linear-pull brakes, and trail-ready components, it can take some bumps on rough city roads. And if the road turns into a trail, you’re ready with Roam. The strong, lightweight ALUXX aluminum frame and stable, fast rolling 700c wheels make it a top choice for town-to-trail adventures.\n- Lightweight and durable ALUXX-grade butted aluminum frame\n- SR Suntour NEX suspension fork with 63mm-travel\n- Shimano 3x8-speed drivetrain", "label": "No"}
+{"text": "Debating for some time whether to play it safe and purchase a standard cycling bike or channel my inner creative self (read: hipster) with a fixed gear bike, I decided to take the plunge and try a fixie. And after riding around for a few days, I discovered a few things that I want to share: Riding a fixie is a lot harder than expected and yet more rewarding that I imagined.\nIt took me a few days to find the right combination of colors, size, and price that suited my needs but I eventually settled on Pure Fix Cycles because of their solid reviews and good reputation for excellent customer service. The bike came in a week about 80% already put together. I had to put on the front tire, handlebars, seat and peddles. Pure Fix suggest taking it to a bike shop for assembly (and to activate the warranty) but I put it together myself and took it to my local shop to give it a once over.\nAs someone who hasn't ridden a bike in years, hoping on a fixed gear bike was indeed a challenge. The bike comes out of the box on the single speed hub which means that it rides like a standard bike but I quickly realized that only having a front brake makes stopping on a dime quite difficult to execute. So I switched it to fixed gear and the first thing I noticed was that I couldn't coast because the pedal is always in motion. To make the bike stop, you have to stop peddling by putting back pressure on the peddles. It's actually easier to stop the bike using the peddles on the fixed gear than using only the front brake on the single speed gear. My national inclination to pedal backwards or not pedal at all when reaching the desired speed was the first barrier I had to overcome when riding the fixie.\nPure Fix has flip flop hubs which means it can go from single speed to fixed with a flip of the tire.\nAfter trying the fixed side for a short bit, I changed it back to single speed because I found it so difficult. Switching the hub, the bike seemed to take off as I rode around the park on the single speed. I enjoyed the freedom of the freewheel peddles on the single speed but once again, I found trying to stop the bike counterintuitive with only the front brake so I eventually went back to the fixed gear.\nI purchased a drop handlebar because I always loved the way they look aesthetically but this also took some time to get used to. However, the front brake that comes with the bike is only designed to fit a standard handlebar so I had to find a slightly longer screw that enabled the brake to fit securely around the bar. I'll probably buy a proper drop handlebar brake in the future but the interesting part is that I find myself barely using the front brake on the fixie because the back pressure on the peddle is so affective for stopping.\nOverall, I love this bike. The challenge of continuous peddling is tough but my feeling of self satisfaction overshadows the difficulty when I arrive at my destination. If I eventually go for a 10 mile ride, I will know that I peddled exactly 10 miles (not coast for majority of it). My one complaint is that the standard seat is not the most comfortable in the world but I have nothing to compare it to since I was never a big bike rider growing up. I'll probably upgrade the seat in the near future.\nEditor's Note: Enter \"free99\" for free shipping.", "label": "No"}
+{"text": "Sail into smoother waters with this easy-to-follow guide on boat engine oil change. You might find yourself tangled with the daunting task of maintaining your vessel, but worry not. This article is designed for you, providing a step-by-step walk-through on how to effectively change your boat engine oil. Filled with expert tips and handy advice, you’ll soon navigate this task like a seasoned sailor and ensure your beloved boat runs smoothly and efficiently. Adventure awaits you with just a little engine upkeep!\nUnderstanding the Importance of Regular Boat Engine Oil Change\nBoat maintenance goes beyond just cleaning the exterior and ensuring it’s a seaworthy vessel – it also includes trips below deck to check on your boat’s engine. Among all the routine checks you do, one of the most important is replacing the engine oil.\nBoosting engine performance\nRegular oil changes are critical for your engine’s performance. clean oil ensures smoother and less resistant internal engine movement. This means that the boat engine can run more efficiently with less effort.\nIncreasing engine longevity\nWhen you change the oil regularly, you reduce wear and tear on the engine components. The oil offers a protective coating that reduces friction between parts, lowering the risk of premature engine failure.\nPreventing corrosion and potential damage\nOil change is important to prevent corrosion and potential damage. Over time, oil breaks down and loses its effectiveness, leaving the engine susceptible to damage from rust and corrosion. Frequent oil changes reduce such risks.\nMaintaining fuel efficiency\nOne of the key benefits of regular oil change is that it helps maintain fuel efficiency. Old, dirty oil can cause the engine to work harder, using more fuel. With regular oil changes, you ensure the engine runs smoothly, thus using less fuel.\nIdentifying the Right Time for An Oil Change\nKnowing when to change your boat engine oil isn’t always straightforward. Several factors come into play when determining the right time.\nChecking oil condition\nThe condition and color of your current engine oil can tell a lot about its state. If the oil has turned dark and gritty, it is time for a change.\nAssessing running hours\nBoat manufacturers typically recommend an oil change after a certain number of running hours. Make sure you follow this guideline closely, changing the oil as recommended.\nConsidering seasonal changes\nSpecifically, if your boat sits idle during the colder months, it’s a good practice to change your oil before winterizing your boat, and then again when de-winterizing at the start of the boating season.\nTaking account of unusual engine behaviour\nFinally, if you notice any unusual engine behavior, such as strange noises or decreased performance, it might be a sign that an oil change is due.\nSelecting the Right Engine Oil for Your Boat\nchoosing the right oil is crucial for your boat’s engine. There are several factors to consider when making this decision.\nChoosing between synthetic and conventional oil\nSynthetic oils are typically recommended for high-performance engine because they provide better protection and performance. However, they also cost more than conventional oils. Weigh the pros and cons before making a choice.\nUnderstanding viscosity ratings\nThe viscosity of your oil will depend on the type and model of your engine. The owner’s manual of your boat will usually tell you what viscosity grade is suitable for your engine.\nEnsuring compatibility with your boat’s engine type\nSome oils are specifically designed for two-stroke engines and others for four-stroke engines. Always ensure that the oil is compatible with your boat’s engine type.\nGathering Required Tools and Equipment\nBefore you start with the oil change process, gather all the necessary tools and equipment.\nOil change pump\nAn oil change pump is an important tool for draining the old oil out of the engine.\nYou’ll need enough new oil to refill the engine.\nA new oil filter is necessary for most oil changes. always use the best filter that you can afford.\nA funnel helps to prevent spills when adding new oil.\nDifferent parts of the oil change process will require the use of wrenches.\nDisposable gloves keep your hands clean and offer protection against possible skin irritants or cuts.\nSafety Precautions to Follow during Oil Change\nWearing safety gear\nWearing safety gear like gloves, glasses, and possibly overalls is important.\nEnsuring proper ventilation\nWorking in a well-ventilated area is vital for safety, especially if you’re working in an enclosed room.\nAvoiding oil spillage\nUsing a drain pan or similar container to catch the old oil will make cleanup easier and help avoid any spills.\nDisposing of used oil responsibly\nUsed oil should always be disposed of safely. Most recycling centers or automotive parts stores accept used oil.\nDraining the Old Engine Oil\nWarming up the engine\nRunning the engine for a few minutes warms up the oil and makes it easier to drain.\nLocating the drain plug\nThe drain plug is generally found at the bottom of the engine.\nUsing an oil change pump\nAn oil change pump is used to drain the oil from the engine.\nCapturing the old oil\nWhen draining the old oil, use a container to capture it.\nReplacing the Oil Filter\nLocating the oil filter\nThe oil filter is usually located on the side of the engine.\nUnfastening the old filter\nUsing an oil filter wrench, unfasten the old filter.\nPreparing the new filter\nBefore installing the new filter, apply a small amount of oil to the gasket to ensure a proper seal.\nInstalling the new filter\nInstall the new filter, ensuring it’s tightly in place.\nAdding New Engine Oil\nOpening the oil fill cap\nThis is typically located on the top of the engine.\nUsing a funnel to avoid spills\nA funnel will help ensure you’re not spilling oil when adding it.\nPouring the new oil\nSlowly pour in the new oil. Be sure to check the level occasionally to avoid overfilling.\nChecking oil levels\nAfter pouring in the new oil, check the oil levels via the dipstick.\nChecking the New Oil Pressure\nStarting the boat engine\nStart your boat engine and let it run for a few minutes.\nMonitoring oil pressure gauge\nKeep a close eye on the oil pressure gauge, ensuring it doesn’t show low pressure.\nLooking for leaks\nCheck around the engine for any signs of leaks.\nCleaning Up and Proper Disposal of Waste\nCleaning any oil spills\nClean up any spilled oil immediately.\nStoring used oil in a sealable container\nEnsure all the old oil is transferred into a container that seals effectively.\nLocating a recycling facility or disposal site\nFinally, find a local waste recycling plant or oil disposal site and drop off the used oil. This is an environmental responsibility every boater should undertake. Remember, proper maintenance extends the life of your boat and protects your investment. It also provides a safer and more enjoyable boating experience.\nKeep an eye on your boat’s engine and change the oil frequently to make the most of your boating adventures. Happy sailing!", "label": "No"}
+{"text": "Itasca, IL — The National Safety Council has announced the 2019 CEOs Who “Get It,” an annual recognition presented to safety leaders who go above and beyond to protect employees both on and off the job.\n“These leaders understand that safety is the cornerstone of every world-class business,” said Nick Smith, interim president and CEO of the National Safety Council. “They have set a standard for their peers and colleagues, and we are proud to recognize their efforts.”\nThis year’s CEOs represent national and international organizations. Each honoree has built his or her organization’s safety strategy using four key components: leadership and employee engagement, safety management solutions, risk reduction, and performance measurement.\nThis year’s recipients are:\n- Stuart Bradie, president and CEO, KBR\n- Anthony “Tony” Campbell, president and CEO, East Kentucky Power Cooperative\n- Brian DiSabatino, CEO, EDiS Co.\n- John E. Fenton, president and CEO, Patriot Rail Co. LLC\n- Greg Gluchowski, president and CEO, The Hillman Group\n- Maree Russo Mulvoy, president, M R Products Inc., home of Mr. Chain\n- Kenneth J. Rueter, president and CEO, UCOR, an AECOM-led partnership with Jacobs\n- William A. Wulfsohn, chairman and CEO, Ashland", "label": "No"}
+{"text": "Are you the business owner of Drago's Bike Works? If you choose to do business with this business, please let the business know that you contacted BBB for a.\nThe Scarpa Drago is a bit too wide in biker overalls forefoot for my feet, but with the closure system on the Furia S, I was able to tighten the shoe to get dragos bike works nice, precise fit despite both shoes sharing the same last.\nThe Furia S is an amazing shoe for overhung bouldering or competition climbing. Its rubber is sticky and soft, allowing the shoe to grab and mold around terribly slippery feet. For example, there are a series of moves on Dark Dragos bike works V10 up at Guanella Pass that revolve around some slippery, slopey feet in a roof. That being said, this shoe is definitely not for everyone.\nI would not suggest the Furia S for vertical or less-than-vertical edging — when Dragos bike works tried to do this in the Furia S my feet were sore for a couple days. The Furia S could potentially work in this dragos bike works for climbers with incredibly well-developed foot muscles, but rosarito ensenada bike ride are much better choices for vertical terrain.\nBoth shoes are built on the same last with the same 3. The differences between the two shoes are subtle, but present. The Furia S has less rubber on the rand around the arch of the foot, allowing dragos bike works more flexibility compared to the Drago.\nThe IPR band pulls down the front of the foot, creating a sort of spring-like sensation when pressing down on a foothold. This allowed more power generation off my feet than I would usually mini bike throttle kit with a shoe as soft as the Furia S.\nThe Scarpa Furia S performs exceptionally well on overhung boulders or routes, as well as in competition settings. Great review. Battery-power source of the motorcycle that uses low cost electrical current to charge. Onboard charger allows for both AC and DC fast dragos bike works. Allows for charging at level 1 and level 2 stations at a level 1 rate.\nDC fast charge allows the owner utilize thousands dragos bike works public DC fast chargers, reducing charge time.\nLightweight Cast-Aluminum is extremely rigid and contributes dragos bike works the precise, responsive handling that makes LiveWire exciting to ride in any situation. Adjustable color touchscreen is a workx crystal display that offers the rider a wide range of information on a screen that girly bikes bright and easy to read.\nCall For Price. Maxim Honda Yamaha. Vespa Miami. G-Force Powersports - Lakewood. Riding round town with all the technology of the electronic injection 3-valve engine will be a pleasure thanks to its excellent performance and its great fuel efficiency.\nAnd with the introduction of ABS, the Primavera is one of the most drqgos, advanced, and safest vehicles in its category. If sudden braking is necessary, the sensor system installed on the front wheel reacts to prevent locking, improving stability and increasing braking effectiveness. Vespa Downers Grove. We take trade ins year dragos bike works Top dollar for trades! You may not believe this, but They actually require us to collect tax, title, license, and other fees.\nCan dragos bike works believe the nerve??? We try to make up for them by wor,s our customers the best prices in Florida on new and pre-owned motorcycles. We are here to serve you Tues-FriSat Come on in and check us out! Modern Bike chopper for sale. Cruiser-class motorcycles are a great choice. You get a relaxed riding position. Their big, twin-cylinder engine makes dragoe of power down low.\nAnd they just look the way a lot of gt timberline bike think a motorcycle dragos bike works. The look? That speaks for itself. Streamline modern meets art deco meets s American Classic. Maintenance-reducing features dragos bike works shaft final drive make this motorcycle truly easy to dragoe. Plus, the Aero is bik huge bargain, giving you a big-bike ride without the big-bike price.\nFeatures may include: V-Twin Dragos bike works. Cruiser worjs know what they want, like a V-twin engine with plenty of low-revving torque. An added extra: Looks Great, Sounds Great. Nothing dragos bike works like a V-twin, and nothing sounds like one either. The Aero features a custom two-into-two exhaust system, flowing into bullet-style mufflers. Go ahead—twist the throttle. Retro Looks, Modern Engineering. RC Hill Honda Powersports.\nDec-Jan Jun-Jul Aug-Sep Dec - Jan Apr-May Feb-Mar Contents The Nanny Clause. Virtual Doula at Pregnancy Page of About. Robin Elise Weiss childbirth and postnatal educator. Break the Bank. Women Economic conditionsBanks and wkrksPersonal finance. Screen Savers. Women Medical care, Health and hygiene. Family Leave. Service with a new rear tire i bikes on metro north in and out.\nInsuring a safe return trip to Sun City West Arizona. Rich Croce in sales was very informative,and friendly. I dragos bike works very impressed with the professionalism of the staff i talked to at Maroneys. As long as customer service is as dragos bike works as it is i will be a customer for life when i move bach to the area.\nRich Croce dragos bike works sales will become my salesmen for future purchases. Majority of customer experience was excellent. Everything would be 5 stars, but unfortunately on the day of pickup I was informed that the keys for the new bike had been lost. A compromise was reached dragos bike works fill the tank mostly full and to have a new set drqgos keys specialized myka bike to pick up the next day, The next day there were still no keys.\nAfter some confusion at the parts counter I was told that 'Harley' workz to making the mistake and bikd the keys may be in either Ibke or Monday. I called back on Saturday and the details again changed saying that 'Harley' could not process the order mountain bike shock pump Monday and there would be no keys until Tuesday.\nI just hope that any future accessory buying experiences aren't as terrible. Dragos bike works, I was very satisfied with the service and forthcoming of the staff to help and answer questions that I had. There was an issue with the horn not working when I picked up the bike, but that was easily remedied at home after further inspection. I would even recommend them to friends, I just hope that the mix ups Dragos bike works experienced were rare.\nI know Jim and Fitz 4 years, purchased 2 harleys, sent 4 customers to you who purchased bikes including one of my relatives dragos bike works purchased a Roadking. If I did not live so far away Bike trainers amazon still would be having a beer with Fitz.\nI have lost touch, hope all is well. I'd like to thank Denise and Bob for their great service. I dog bike basket 20 lbs know how many dealerships would take a small deposit over the phone just to hold a bike for someone. I wasn't able to get to Maroney's for 2 days and I knew that bike would go.\nThey probably could have sold it outright within that time. Denise assured me it would be there, and it was. This is my first HD, I've been waiting for this bike for a very very long time!! Bike doormat come true.\nThis Heritage Dragos bike works, I consider my first real bike. Thanks again for your service. Looking foward to the rides. I want to thank pat maroney and his fantastic staff i was broke down on the highway my dealer in mass montys harleydavidson west bridgewater told me to get my bike to moroneys if there was any chance of getting fixed and continuing on to nashville tenn they can due it it is dragos bike works morning and my shift shaft is broke in the transmision six hour job nobody caries this part well his mechanic worked magic four hrs later i was on my way dragos bike works later i am home thanks to this dealer my vacation was successful once again i want to thank the whole staff for being so nice i recommend to anybody that reads this to stop in and say hi to them sincerely roy luciano utra classic miles and still dragos bike works.\nI needed a rear tire, mine was shot. Upon arriving I found a problem with my rear dragos bike works.\nI was directed to Moroney's. This was on a Saturday afternoon. The owner,Pat, saw to it that I was taken care dragos bike works so Wodks could get a new tire and return home safely. This was on a Goldwing with a sidecar. Everyone at this dealership was very helpful, like you were important.\nThanks to all at Moroney's, I made it home. I also dragos bike works want to forget kevin in finance all of dragos bike works team have been treated me dragos bike works a family member so well and profesional makes it for me a A plus good luck in your buisness you desrve it PAT MORONEY.\nI needed new tires and inspection on my Yamaha Warrior and the treatment I recvd from Colin in the metric service department was incredible. He was very helpful and a dragos bike works to deal dragos bike works. The prices couldn't be beat and the level of service I dans bike shop berwyn was impeccable.\nI will continue to do business with Moroney's whether it be through the service dept or the sales dept due the wonderul experience I had dragos bike works time around.\nColin is a true asset to your business. I just wanted to take a moment to thank maroneys harley davidson dealer in orange county new york. When you think your bike is down for the count, go to Maroneys, they really help pull you out of a jam. Have lunch and your back on the road Thanks Guys. I have been reading alot of bad info on your dealership.\nI carbondale bike going to be making a trip up there lem dirtbike dragos bike works other bikers and we where dragos bike works to stop in but I don't know now. I understand there are some bad things that happen to some small amount of people but it seems that it is happen more and more, to a large amount of people from your dealer ship.\nI don't expect anything to happen from this e-mail. Just know that the word is getting out because I am in Flordia and I have heard it. Last year I dragos bike works up to Laconia and thought I had a problem and I was in and out in an dragos bike works, and not charged. This year my brother had a minor problem with his bike oil leak and same deal in and out and no charge!\nWe grew up in Dutchess County and always stop in the area on our way up north. It is great to see how well we are treated on the road. The service and the attention was out standing. I highly recommend Moroneys Cycle to all my family and friends!!!!\nThank you to the entire staff for making all of my transactions including sales, parts and service easy and smooth. The best experience I have ever had. Pat and his team are the best in the business, That is for sure. I was very interested in purchasing a bike from your store on Sunday, however I got there free flite bikes pm.\nBob at this time was Great. I ask him to see the bike outside and he was very pleased to do so. I told him I would contact him on Monday. He said that was his day off and Denise could take care of this. I call her first thing in the morning and made and offer.\nShe said she dragos bike works get back to me later on in the day. I never heard back so I called her. She said that she forgot and that on Tuesday I would get and answer. Tuesday is over and no reply still. I am very disappointed in the way this was handled.\nfocus e bike Yes dragos bike works No would have been fine. Don't get dragos bike works better dragos bike works that! In May of '08 we went to Moroney's the get a helmet for my wife. The sales person CR must have spent bkie dragos bike works with her making sure that it fit just right. I thought that was exceptional. Denise in sales and Kathy in clothing are the best. Being in the cust. They are the best,keep up the good work.\nCalled about Honda parts Called back. Tell parts person what I need. Had attitude like I was a bother. Once rragos told dealer closes at 1: Sent son to pick up brake pads, he arrived at HD guy says they are all gone over there. My bike tire patch kit bike biie delayed from delivery for 2 days because of this. Happened once before. Will admit that most employees are friendly and dealership does many activities to keep interested in motorcycling.\nThey do work hard to stay in the limelight and dyno nights are good fun.\nDragls knew that the day would come for me to move up to a real BIKE! That day came on November 22, dragos bike works thanks to my salesman, Bob Roper he made it all possible. There isn't enough room to tell you how satisfied I am with my Adrienne XL and the entire staff at Moroney's.\nI highly recommend them to any one who's in the market for a Harley. Keep up the good work guys and as always workw safe'! What a wonderful dealership. You had the bike I was looking for, a Super Drwgos Custom, and the price was more than super. My old school bikers, Rich,was easy to work with and I feel more than satisfied dragos bike works his knowledge of Harley bikes, and the service that you provide.\nThank you again and again for making my buying experience the best ever. Dragos bike works gained my respect by talking to me honestly with no BS. Bob answered all ddagos questions about the bike and. Danbury told me I needed to drop a thousand dollar deposit just to talk to the finance manager to find out what my payments would be.\nThey said it would show Dragos bike works was Serious! Well I was serious and picked up my 09 Nightrain 2 dragos bike works ago from Maroneys and Bob. True old school service. Thanks again to Bob, Brian, and the guys in the shop who installed my bars. We heard great reviews about Maroneys from friends and family, basically everyone we know with worms bike! So when it came time to buy a bike my husband bought a used Harley from Maroney's.\nThe bike looked great but intstantly eragos were minor problems, leaking oil, lights not schellers bike, ect.\nThey fixed those on the spot and apolopgized for the inconvenience. Dragos bike works was closed so we paid for the tow back to a friends house. Maroneys then towed it from there the next day and took their time in fixing it. Dargos then said that the would deliver it to oberlin bike coop the day after it was fixed since we live upstate but that didnt happen.\nWe dargos had to wait 4 days for delivery or come and pick it up! The dragos bike works compensation that they offered was gas and toll money, because we demanded it. All I can say is good thing we bought the warranty! Dealing with jason in phone order parts is always great. Just wanted to express my great service experience dragos bike works the Metric Service Dept. wrks\nService manager Colin Goess is an asset to your dealership, he's very professional. My bike a Yamaha Fjr is very well looked after. Todays service was completed on hike as usual. Great work, first time in the dealership but was very pleased with dragos bike works professionalism dragos bike works by all.\nWould just like to thank Denise for helping me with my first Harley purchase.\nI will be back when I am ready for number two. Dragos bike works showed me around took time to spend with me. I had gone to other dealers but was treated like a crap.\nI wprks to all my friends to give Denise a call they will not be disappointed. Thank you again Denise. Recently purchased my first motorcycle a Harley Sportster Low. Completely thrilled with the assembly of the bike, the look of the bike, the ride of the bike and most importantly the great sales team at Maroney's. In late September I was hit head-on by a left-turner who told the police he was looking in his rear view mirror as he turned and never saw me.\nI called Moroney's from the scene dragos bike works the accident dragos bike works Westchester County and spoke to Denise. She said just flat-bed the bike up there immediately and tell the driver that Moroney's will take care of the bill.\nThe damage was substantial new frame rickshaw bike for sale more but the bike trailer connector was expertly and expeditiously repaired in time for dragos bike works few more rides before the onset of winter.\nMoroney's handled the insurance company and made bike america sunrise bad situation easier to deal with.\nI bought my Harley Softail Deluxe in Feb. Thanks Denise, Buck and everyone else that worked on this repair. I purchase parts and clothing at Moroney's all of the dragos bike works. Very professional and courteous staff. Always a positive experience. Bob dargos Sales was very patient and followed through as promised. Brian in parts was awesome, he offered his suggestions and input when my girl and I ordered the chrome and parts for 'pretty girl'.\nBrian and Bob was always happy to assist Karen when she visit Moroneys. We feel like family and I would not go to any dragoos dealership. I want to thank Bob in Sales for the birthday wishes, smooth sailing and thanks to Brian because my bike looks great chrome and all. One problem, I wish my bike jeep mountain bike cleaned for dragos bike works before picking it up, and it would be nice is Dragos bike works took photos of bije customers and new bikes when picking up.\nThis is an suggestion. Great Job Gang. My girl love shopping for 'pretty girl'. First time Harley buyer and it was a great experience at Maroneys. Drzgos went the extra mile dragos bike works get the bike I wanted animal bmx bikes antoher dealer and was still below other dealers I had visited.\nHeading back soon to add pipes and more chrome. Great sales team and I recommend them to anybody looking to purchase. Chuck in Brookfield, CT. Sent email as per your website about possible purchase and did not get even an automated response In both dragoa the sales staff and service staff have been very helpful and knowledgeable.\ndragos bike works If there has been any change in the 10 years since my first purchase it is that all of the staff are even more bell bike rack instructions and anxious vike serve the customer, and vike willing to resolve any concern. Special thanks to Denise in sales and the excellent parts and service people! I have been dealing with Jim Moroney's since with the new purchase of dragos bike works Heritage Softail Motorcycle.\nWhen I walk into the store there isn't anyone who does'nt say HI and offer to help. I have traded in and bought dragos bike works motorcycles over the last 12 years I know them and Denise in sales is tops! The service department knows me by first name and Dan, and Buck get me woris quickest possible appointments.\nI am very lucky to have people who work on my bike like it was their own. These long beach bike trail expensive 'toys' and they never fail to deliver. Very happy with my purchase of a Softail Custom. The Sales staff spent alot of eragos with me over the course of many visits to make sure that I got the right bike that would suit my riding style best.\nI have been dealing with Denise and Moroneys for the past 17 years. I have made Five New Bike purchases during that time frame and each experience has been great. I live pink bike classifieds miles away from the dealership but the customer service I receive at Moroneys makes it worth the ride. The mail order service is top notch and the discounts are real. This drsgos the way business should be done. Drove miles to buy my second Harley honda 70cc dirt bike Moroney's.\nNo one rragos Long Island gives the customer service and great deals like Moroney's. Worth the drive! How to turn left on a bike bought my first Harley Davidson a lifetime dream come true At Moroney's.\nMy salesman is Bob Roper, was very relaxed bkie not pushy, but was very experienced and led wkrks through the buying process with ease. I never felt like I was being pushed, but rather guided by a very experienced friend who wanted me to have the most fun with my new dream machine.\nBob stayed by me through the financing and accessory buying, so I never felt like I was left alone in unfamiliar territory. Thanks for making it fun and easy! So far so good ,slight problem dragos bike works machine but it is an excellent ride,salesman ray was easy to deal with and no drags or pressure the sales dept ladies are very easy and fun to deal with and talk to,brian in chrome is very up to date and quick with answears and results on the parts i asked about. Wokrs thank dragos bike works guys enough!\nMy 05 Dyna crapped out on Me dragos bike works the Mobil station at naround 1pm today I will travel the miles to purchase My next new HD workz your store Thanks Much!!!!!!! I have bought from Moroney's since and have always recieved the best sales and service AFTER the sale that I have had with any other large purchase. To find a drabos this busy that will still break thier asses to make sure the customer is happy is a rare dragos bike works. I had a good experience with my purchase,a ' custom' it is my first new bike and I could not be more happy with it.\nMy salesman lake orion bike shop Ray and he dragos bike works more than helpfull with all questions and gave me some much needed tips on overall safety dragos bike works operation of my bike ,Kevin in finance offered very sound advice when it came to extended services to protect my bike now and well into the future.\nI have been coming to moroneys for years with my brotherinlaw dragox he would buy parts or a new ktm and I always got the impression that the entire wprks was ddagos and helpfull with any question dragos bike works request. I would highly recomend moroney's for any one who wanted the best motorcycles fragos and dragos bike works available in the north east.\nBob Roper was excelent with following through on all aspects of my purchase, he kept in constatnt contact with me and kept me up on every detail from when my bike left the factory to arriving at the dealership Brian made adding my accesoried smooth and painless and everything was just as i wanted when dragos bike works picked up my bike Moroney's made me a good dragos bike works on my trade-in, which in turn, I bmw 5 series bike rack a brand new Harley.\nThe Sales and Customer service was great, as they dealer prep'd the bike while I waited, so I could drive it back home that schwinn mountain bikes target. Thanks to bime at Moroneys, and I am happy to be 'Part of dragos bike works family' John Gennardo.\nBought my springer woris from another dealership but have always had it serviced at Moroney's. Though I don't ride anymore, I will always remember the fun I had on my Harley and the great times and service I received from the Moroney team. Bill of Newburgh. Many H-D dealerships sell parts on-line at so called discounts.\nBut, Worsk actually gives real discounts and great customer service. I tell all of my friends to forget about the other guys, and buy from Moroney's. It's a pleasure to dragos bike works with real bije enthusiasts. Moroney's is a huge name in Racing, and the people are easy to deal with. My advise: Don't buy anywhere else. The only dragos bike works I have had, and this has occurred several times, when I pick my motorcycle up after service it's never clean and I have to waite for it to be washed.\nI always dragos bike works the day I make the pick up to give service a heads up when I will be there.\nNews:If you could see yourself being that someone you better pick up the phone .. It was dyno tuned by Drago Bike Works who installed the perfect program for the.\nLeave a Comment", "label": "No"}
+{"text": "Garage heater trouble shooting\nI don’t stop in here very often, I tend to hang out at Knots more. This question seemed like it would be better posted here though.\nI have a Mr Heater, natural gas burning, hanging garage heater that is only a year old. It won’t seem to light now. I figured it was the ignitor and they are cheap so I ordered one and a flame sensor also. I replaced both and it still won’t fire. I can light the flame with a lighter when the thermostat calls for heat and you can hear the gas valve click open so that isn’t the problem. After replacing the parts and having no change I tried to see if the ignitor was getting any voltage (Don’t know what it should get) with my multimeter set on the lowest volt setting and didn’t get anything. I took off the wire that goes from the circuit board to the ignitor and tested it for continuity and it was good. I then checked the connector on the circuit board that the wire plugs into and still didn’t get any voltage. BTW when I checked the voltage I just grounded the probe to the heater itself. Right or not?\nAnyway, I now suspect the circuit board but they are fifty bucks and I don’t want to buy one unless I know that is the problem. If it makes any difference I do woodworking in the garage so the heater is exposed to sawdust.", "label": "No"}
+{"text": "pushmatic panel recall federal pacific breaker panel recall home appetizer ideas home ideas center federal pacific breaker panel recall home bar ideas diy home remodeling ideas 2019.\ngame of thrones trees many trees fell victim to storm yesterday.\nvacuum pump oil autozone oil change pump extracting oil with vacuum pump no need to jack the car up oil change pump.\nsantos mahogany wood floors plank flooring mahogany our low price of.\ncalphalon tri ply stainless steel reviews ply stainless steel review the.\n7 wonders board game which is the best 7 wonders expansion our list ranked board game resource.\nteal car seat covers car seat cover lifestyle.\ncleaning out pool hose gets in the way of your pool cleaning robot you can put weights on the hose to hold it an inch underwater or just take the bottom cleaner out.\nquonset hut garage kit hut garage hut kits full size of garage building kits building hut homes consider these.\ngarden water wheels for sale garden water wheel garden water wheel plans water wheel pictures of water wheels built from our garden water wheel.", "label": "No"}
+{"text": "There are currently three larger marinas in Phuket with capacity of over 500 boats. Due to congestion, especially during the peak seasons from October to April, two additional large marinas are now under construction in Phuket and planned to be in operation in 1-2 years time.\nThree boats with Volvo Penta IPS systems have already found their way to Phuket from other parts of the world. And more and more boats are coming.\nTo safeguard a good service and support to these boats, Volvo Penta has recently conducted IPS service training in Phuket. Participant included technicians from Volvo Penta service dealers/distributors, boat dealers and operators of boats powered by IPS.\nThe Volvo Penta dealer in Phuket is \"YSE Marine Engineering Company\" - a well equipped workshop, located in the marina Phuket Boat Lagoon. In 2006, YSE was appointed as Volvo Penta Authorized Service Center.\n*YSE today has 15 people employed, including 12 technicians and a workshop integrated with marine accessories shop. YSE is equipped with Volvo Penta tools including “Vodia” and technicians certified/ trained to handle Volvo Penta electronic products.\nGo to our image gallery to find the picture of YSE. Search for \"YSE Marine Engineering Company\"", "label": "No"}
+{"text": "The MOLOTOW™ Tryout Train-Pack for styling and collecting is only available for a short time. Here you can see the pictures of MadCs train.\nThe folded cardboard rail car is available as singel product, in three different variants, too. As NY, Berlin and Hamburg Subway cars! The MOLOTOW™ ONE4ALL 227HS-S marker kit which is included, is available here, in our online store, too.", "label": "No"}
+{"text": "Used Cannondale SR300 Road bike\nUsed Cannondale Road Bike for sale! Shred the roads on this awesome aluminum frame Cannondale road bike. Thanks to the 2x7 drive train you will fly down the roads of Roanoke. Your friends will find you fashionable with the super clean looking Black paint job and pink camo bar tape. Come check it out! Size: 56cmFrame: Aluminum Wheels: 700x25Speed: 2x7 *Disclaimer. All used bikes have been thoroughly inspected for functionality and safety. We encourage you to visit our store to test ride in order to ensure proper fit and that any blemishes or signs of use are to your expectations. No returns on used .", "label": "No"}
+{"text": "- Related Searches for\n- carbon road racing bike electric bike mini racing bikes mountain bike bmx racing bikes folding racing bike More...\nMinimum Order: OK\n1 Set (Min. Order)\nUS $999-1999 / Set (FOB Price)\n50 Set/Sets per Day (Supply Ability)\nHot racing bikes Directory: Recommended racing bikes\nDo you want to show racing bikes or other products of your own company? Display your Products FREE now!", "label": "No"}
+{"text": "Halfords wheels out Olympic golden girl Laura Trott to boost falling bike sales\nHalfords has pinned its hopes on double Olympic gold medallist Laura Trott to ratchet up its bike sales this year.\nThe cycling star holds seven world titles and has launched four bikes with the retailer, starting at £449 each, available from next month.\nHalfords is hoping to boost flagging bike sales.\nGolden touch? Olympic gold medallist Laura Trott has been hired by Halfords to ratchet up its bike sales this year\nHowever the City is still less than impressed and shares freewheeled down 7.2 per cent, or 31.7p, to 406.9p.\nSales in stores open more than a year in its cycling business fell 0.9 per cent in the year to April 1 after a summer slump.\nHalfords chief executive Jill McDonald said sales improved in the second half of the year for cycling and cycle repair.\nFull-year pre-tax profit for the cycling to car accessories chain rose 0.5 per cent to £81.5million and sales reached £1billion, up 1.5 per cent for stores open more than a year.\nPrevious Olympians to launch a Halfords range include Victoria Pendleton and Bradley Wiggins.\nGeorge Salmon, equity analyst at Hargreaves Lansdown, said: ‘Halfords is hoping that Rio 2016 will bring something similar to the “Wiggo effect” on cycling’s popularity following London 2012.’\nMost watched Money videos\n- Jaguar Land Rover opens UK's biggest state-of-the-art design centre\n- Aston Martin reveals first family SUV in brand's 106-year history\n- Scottish Mortgage: Why we hold Amazon, Tesla and Ferrari\n- Michael Schumacher's son drives Dad's title-winning Ferrari F1 car\n- Bristol Mayor explains the 'logic' of a proposed diesel car ban\n- Guy Martin sets new speed world record for a tractor at 135mph\n- Land Rover reveals the Defender is being used in next Bond film\n- The all-electric Ford Mustang Mach-E ad starring Idris Elba\n- H&H Classics auctions the classic 1983 Ferrari 308 GTB QV\n- Mazda's CX-30 family SUV scores incredibly high crash test rating\n- Aston Martin reveals the engine roar of its first SUV\n- What does Britain's General Election mean for investors?", "label": "No"}
+{"text": "Table of Contents\n- 1 ODYSSEY Tool Multi Travel Bk/Sl - Y-710-BLK\n- 2 PRO BIKE TOOL 6 Cycling Maintenance Tools For Road And Mountain Bikes\n- 3 Multi Tool 19 Gold 19 Gold\n- 4 WOTOW 16 In 1 With 3 Pcs Tire Pry Bars Rods\n- 5 Animal Kotulak Multi Tool Tool Black\n- 6 PRO BIKE TOOL Mini For Your Bicycle, Home Or Work - Hard Case Pouch\n- 7 Bicycle Repair Bag Bike Repair Tool Kit Safety Emergency All In One Tool\n- 8 Crankbrothers Multi Tool 17 17 Black & Red\n- 9 Venzo 14 Inch Drive Allen & Torx Sockets, 4mm 5mm Extension Bar & Storage\n- 10 WOTOW Bike Repair Set Maintenance Fix Mini Set For Road Mountain Bikes 16 In 1\n- 11 Lumintrail Bike Repair Tool Maintenance Tool Set With Tool Box\n- 12 PRO BIKE TOOL Bicycle Steel, No Rust, Long Leverage Tools, Includes Bag\nLooking for something interesting? Here are a few articles you might enjoy:\n- 8 Best Cannondale Mountain Bike\n- 8 Best Aluminum Mountain Bike\n- 15 Best Fat Tire Mountain Bike\n- 9 Best BMX Bike Brake Cable Kit\n12 TOP RATED BMX BIKE MULTITOOL\nJust so you know, a lot of our readers have shown interest in reading about:\n- 4mm, 5mm, 6mm, and 8mm hex wrenches\n- 17mm deep socket\n- integrated storage compartment\n- easy to use & comfortable multi-tool set. ergonomic handle designed to fit in the palm of your hand, to help apply correct force. the non-slip grip provides the right amount of comfort and control. unique 3-way design offers more leverage than a single wrench.\n- 6 functions in one tool - includes 6 interchangeable tool bits: 2, 4, 5, 6mm hex, t25 and ph2 cross-head screwdriver.\n- precision engineering - suitable for daily use at home, or in a professional mechanic environment. riveting bead design to firmly secure tool bits when in use.\n- includes 19 tools\n- comes with a tool flask\n- includes two phillips and two flathead screwdrivers\n- it can help you fix most problems of your bike with this kit\n- with good quality, durable, full function\n- allen keys: 2, 2.5, 3, 4, 5, 6\n- bmx specific multi tool 17mm socket 15mm pedal wrench spoke wrench chain breaker 5mm 6mm 8mm 7/32??Ñ and ????Ñ hex bits 30.3 oz/ 859 grams\n- reliable & built to last - high quality stainless steel handle with reversible drive\n- easily & safely tighten bolts - magnetic tool bit extender and 10 tool bits: 2mm/ 3mm/ 4mm /5mm /6mm /8mm /t25 /t30 /ph1 / sl4. check out our ‘how to video’ & buying guide' videos in the ‘related video shorts’ section.\n- handy hard case pouch - convenient & stylish storage for the ratchet tool set and other small ride essentials such as money and credit cards!\n- limited product inventory, bike tool kit, bike repair kit, bike kit, bike tire repair kit, bicycle tool kit, bicycle repair kit, bike tire patch kit, mountain bike tool kit, bike patch kit, bike tools kit set, bike repair multitool, experience the best bicycle repair in new mountain bike tires repair tools.\n- complete basic mountian compact professional accessory, trike biking, cycling trek road survival assembly fix multi-tool mechanic parches, supports the repair in a harsh environment and immediately continues to ride without danger.\n- bike repair kit with pump and bag, bicycle tube repair patch tool kit, all accessory better than other similar products—compared to the repair function or the quality of accessories.\n- chain tool 8/9/10/11/12 speed compatible\n- hex wrenches #2, 2. 5, 3, 4, 5, 6, 8\n- phillips #2, flat #2\n- essential: too much tightening will deform bike parts. too little torque would mean the parts are loose. the bike torque wrench is a must have tool for installing bolts and bike part.\n- calibrated before packing: we understand the accuracy of the torque is very important, especially for those expensive carbon parts. all the torque wrenches are pre-calibrated in the factory. please read the instruction carefully to avoid any damage.\n- accurate: it is the torque wrench with a preset lock ring. unlike others the presetting could be changed when turning the handle, the torque wrench comes with a lock ring to freeze the preset value. 1/4'' torque fix set,\n- strong and handy --- be well made in steel, fine workmanship, durable, stronger and more effective, compact, a must have bike repair kits for cyclists.\n- riding company --- can help to fix most problems of bike as traveling tool kit, also can do basic maintenance work when not ride, even can be used as daily household repair tool.\n- compact, easy to carry --- mini enough to throw into your bag or pocket, with dimension about 5.1*3.7*1.2 inch, 10oz. come with a durable box to carry them, don't worry about missing parts.\n- the tl810e tool kit includes: bike tire patch kit, pedal wrench, bike chain whip, headset wrench, round spoke wrench, tire levers, open wrench, freewheel remover, cotterless crank tool, hex key wrench set, l hex key wrench with square adapter, l shaped auxiliary wrench, chain rivet extractor, bottom bracket tool, hub cone spanners, tire pressure gauge pen, and 2 in 1 screwdriver.\n- bike tool kit that offers a 42-piece set of repair tools generally used on most bikes housed in a custom molded box/case. this multi tool bike kit is ideal for any home bicycle mechanic who wants the ultimate portable tool kit.\n- the lumintrail bike repair tool kit assists mountain bikes (mtb), road bikes, bmx bikes, hybrid bicycles & more! - providing you with the accessories needed to perform basic bicycle repair/maintenance on any bike\n- reliable & built to last multi tool - cold forged sus420 stainless steel for high strength and durability.\n- slim, compact and lightweight bicycle tool kit. only 0.3 inches thick, 3.7 inches long & lightweight at 3.6oz.\n- safely tighten bolts, even the toughest ones! 8 long leverage tools: allen / hex tool 2.5/3/4/5/6, star shaped/hex tool t25/t30 and phillips tool ph1 cross drive. auto indexing feature ensures tools lock into place when tightening.", "label": "No"}
+{"text": "I am looking for a source of a shaft speed sensor. I want to sense the rotation of a shaft on a bucket elevator. I want to be able to drop out the control circuit to this elevator if the shaft speed drops as in the case of the belt slipping. Does anyone have a source for this type of sensor? I would like to keep it simple without using plc's or the such. Anyone got any suggestions on this situation?Thanks, Merlin\nSuch sensors are made by nearly every control maker. A typical arrangement has you add a small wheel to the shaft. Part of this wheel has a magnet. The wheel, and the magnet, rotate through a piece that senses the magnet each time it passes.\nI worked with a type that would maintain state between pulses so it was on steady instead of blinking off and on every time the shaft turned. It had an adjustment so it could be tuned to the rotation speed. I suppose you could do the same thing with a time delay relay but it might be hard to adjust.\nIf you don't use a plc, you'll need to bypass the sensor on start-up and it's a bear to trouble-shoot.\nRe: Shaft speed sensing\n#188478 08/11/0902:06 AM08/11/0902:06 AM\nWay back in the olden days we did stuff like this with some sort of pulse generator on the shaft (optical, Hall Effect or magnet/coil) and a pretty simple logic circuit that compared the pulses to a time base. It could be as simple as a 555 timer set up as a missing pulse detector. If the motor pulse didn't reset it within the window it triggered the alarm. Usually they would just suppress errors for a second or so to let the motor speed stabilize. An even older scheme used a small DC generator on the end of the shaft. If the output voltage dipped, the motor was slowing down. That was really more of an adjustment tool than a monitor though. We used them to set up the hydraulic motor/spool valve assembly on line printers (looking at it with a scope).\nThanks guys for all the information. The information is helpful. I was told by another EC that you can put a sensor on the shaft and simply wire it through the #2 on start-stop button. He said the only hang up is you will have to hold the start button until the shaft is up to speed. That is all OK but i guess i'm a little cloudy on how this would work. Can someone point me in the right direction? I understand the cocept but how will that hold the coil in without a timing relay. This is going to be on a shaft with only about 100 rpm. Thanks again", "label": "No"}
+{"text": "Complete 1 System Goodman HP Split System: EPA Cooling Maintenance. Checked tstat and air filter. Checked blower amp draw and run cap. Inspected all wiring at the AH. Inspected evap coil. Drain line found clear. Checked compressor and cfm amp draws. Checked pressures. Inspected all wiring at the condenser unit. Checked dual cap. Cleaned condenser coil. System is running great at this time.", "label": "No"}
+{"text": "GARAGE DOOR PARTS SCHEMATIC\nGarage Door Diagrams - Garage Door Part Supply\nGarage Door Bottom Weatherseal; Garage Door Hardware Kit; Garage Door Lubricants; Garage Door Organizers; Hinges. Hinges - 11 Gauge; Hinges - 14 Gauge; Hinges - 18 Gauge; Operator Parts. Operator Parts - Accessories; Operator Parts - Batteries; Operator Parts - Belts; Operator Parts - Capacitors; Operator Parts - Commercial Wall Button Stations\nGarage Door Parts Diagram | Garage Door Parts Guide\nAnd when we finally decided to do it, we made sure we are able to provide you with everything you need to know about garage door parts and we think this diagram is a good way to start. However, the garage door parts in this diagram are only the tip of the iceberg.\nThe Many Parts of a Garage Door (Tilt and Roll Style Diagrams)\nThis brief article sets out two detailed diagrams illustrating the various parts of garage doors – one diagram for a tilt garage door and the other for a roll up garage door. Anatomy of a Tilt-Garage Door. Left Cable Drum: Keeps the garage door balanced and stable as it opens and closes. Reinforcing Angle: Supports the top section of a garage\nLiftMaster Garage Door Opener Parts Schematics\nFinding LiftMaster garage door opener parts is simpler with our illustrated and parts-by-number schematics at Garage Door Supply Company for every model LiftMaster residential or commercial garage door operator. Simply click on your model to open up the schematic for all parts.\nLiftmaster Garage Door Opener Wiring Schematic | Free\nCollection of liftmaster garage door opener wiring schematic. A wiring diagram is a simplified conventional pictorial representation of an electric circuit. It shows the parts of the circuit as simplified shapes, and also the power and signal connections between the devices.\nGenie Garage Door Opener Replacement Parts Guides\nEven though you may not find the parts schematic for your older Genie garage door opener, we may still have some parts available. If you don't see an available schematic for your Genie Garage Door Opener model, please call us. many of the parts on those older machines may be the same as some of the parts on machines manufactured after 1995.\nGarage Door Parts by Interactive Diagram\n<p>Replacement garage door opener parts for every major brand of garage door operator cost less and are easier to find at North Shore Commercial Door. We have \"exploded parts view\" diagrams that are illustrated and interactive. See what your part looks like and how it fits on your garage door opener. Order by part number. If you don't know the part number, our interactive parts illustrations\nGenie Garage Door Opener Wiring Schematic | Free Wiring\nAssortment of genie garage door opener wiring schematic. A wiring diagram is a streamlined conventional photographic representation of an electrical circuit. It shows the parts of the circuit as simplified forms, and the power as well as signal connections between the devices.\nGarage Door Parts Guide - Welcome to the Garage Door Parts\nNew garage door parts and products by different manufacturers hit the market everyday. That is why I came up with garage door parts reviews which you can read by following this link. As new products are introduced, I will continue to update the Garage Door Parts Diagram page, reviews, and my personal\nChamberlain Garage Door Opener Schematic - Wiring Forums\nTrying to find information regarding Chamberlain Garage Door Opener Schematic? you are right here. You may be a service technician who wants to look for recommendations or solve existing troubles. Or you are a pupil, or maybe even you who just would like to know regarding Chamberlain Garage Door Opener Schematic. Garage Doors : Garage", "label": "No"}
+{"text": "If you want to cross choppy waters then I guess water is going to come on board and if that’s going to happen then you probably need some sort of safety net -namely, a bilge pump.\nOf course a manual bilge pump is going to be hard work, so perhaps an electric one would be better? This by default needs a battery.\nWhat happens if the battery’s not charged? – that could be an issue – far better to have a diesel pump, with a fuel tank though you would still need a battery to start it but thinking about it, with a diesel pump at least you can add a generator onto the side to charge the battery – now wouldn’t that be efficient?\nOne slight problem….with the weight of this equipment, you’re probably going to need a slightly bigger boat….. ok,….but it is an investment and although, because it’s bigger, it will need a bigger engine and naturally will cost more to run but it will have more than enough capacity for the job, won’t it? ……….it’s just that, how do I put it…\nWell ….it won’t be quite as fast as the old little boat you had before ……………even if it did let in water.", "label": "No"}
+{"text": "The product that adapts as your child grows. Now redesigned. Small, smart design changes on our classic GO•UP products.\n3-height adjustable aluminium T-bar with an anti-scratch sleeve inside the painted column, for kids up to 6+. 2-height adjustable TPR seat. Easily transform the product from ride-on to walking bike and scooter with a push button. Patented steering lock button fixes the steering system of the two front wheels to only move forward & backward. High-quality and high-rebound two 121mm front and one 80mm rear PU casted wheels, mounted on ABEC 5 bearings. New designed, robust composite brake delivers brake efficiency and prolongs wheel longevity. Super low nylon reinforced structure with an anti-slip composite deck supports up to 50kg.\nAll-in-one product: ride-on, walking bike, scooter for kids.", "label": "No"}
+{"text": "Deriving from our brand aesthetic the bright livery of the A320 family we currently utilize 6 Airbus A320neo aircraft, 7 Airbus A321neo, and 1 Airbus A321 freighter; making us the 1st Omani carrier to utilize these highly rated single-aisle aircraft. This also opens up to us new travel possibilities across the region and the world.\nِAll new A320neo and A321neo joining our fleet in 2019 and 2021/2022; brings us additional fuel and operational efficiency which will aid us to offer our passengers lower prices and higher frequency.\nBeing equipped with 180 seats and 212 seats respectively, the A320neo & the A321neo offer the passenger generous leg space and a comfortable seat pitch, which is key for a smooth and enjoyable journey.\nSalamAir also operates one A321-200P2F-Cargo freighter.", "label": "No"}
+{"text": "FOUNTAIN VALLEY, Calif. (BRAIN) —Pedego plans to accelerate its growth on the East Coast with the appointment of dealer development specialist Ryan Maccione.\nThe company has 85 branded stores nationally, including 40 on the East Coast. It said it plans to have 200 stores nationally by the end of 2017 and 500 by 2020.\nMaccione is charged with opening dozens of new Pedego stores along the Eastern seaboard and assisting existing dealers.\nPedego CEO and co-founder Don DiCostanzo said, “Our dealers are devoted to providing Pedego bikes to a high-demand market all over the country. Ryan will provide East Coast support that makes owning a Pedego store in the East even more fun than before.”\nMaccione comes to Pedego with 18 years of sales and marketing experience where his primary expertise has been in dealer development, sales, marketing, management and business development. For nearly a decade, he ran the sales and finance departments for Bridgeport Harley-Davidson, Connecticut’s largest motorcycle dealership. He also owned a Segway dealership and was a brand manager for A2B Electric Bikes.", "label": "No"}
+{"text": "Topic: Re: Gravely Tractor\n|Garden Tractors Discussion Forum|\n[Show Entire Topic] [Return to Forum]\n[Show Entire Topic]\n[Return to Forum]\n[Add a Reply]\nBob, we're talking about the engine sprocket, right, not the one on the starter?\nOn one I did from the 1950's, the starter sprocket was screwed on, while the fan pulley was pressed on.\nBen W. from VA\nRe: Gravely Tractor in reply to SuperABen, 02-02-2013 17:32:48\nYes, I am going to install the piston, and cylinder now. Cleaned up the piston and noticed on the exhaust side there is some damage on the top, to about 3/16 from the top piston ring. Don't know if this may be part of my problem, or if it is what Richard told me years ago, that the crank is misaligned. Probably both? Thank you.\n|Same-Day Shipping! Most of our stocked parts ship the same day you order (M-F). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a Company you can trust and have generous return policies! Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ More Info ]|\n| Copyright © 1997-2013 Yesterday's Tractor Co.|\nTRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.\nYesterday's Tractors - Antique Tractor Headquarters", "label": "No"}
+{"text": "we are a dell laptop battery dealers in hyderabad. we have sell all model dell laptop batteries. we will complete check your laptop battery status and charging capacity. finally we change your damaged battery and fix new battery in your laptop.\nYou are getting battery not charging problem? Our well trained service engineer will repair your laptop problems like battery not charging and etc. our service coordinator will find out your dell laptop problem and provide quick fix solution and flexible costing. Our dell service center to provide excellence laptop repair service handling, quick and consistent battery not charging fix services in Hyderabad city nearby ameerpet, kondapur, uppal, kukatpally locations.\nWe handle dell Laptop service, dell spares and accessories services and provide dell support in the case of any critical condition", "label": "No"}
+{"text": "Tuesday, July 20, 2010\nCirrus SR22T: Turbo Without the STC\nCirrus Design now offers a turbocharged model with a factory Continental\nCirrus has been a consistent leader in producing aircraft that embrace 21st century technology, not only in construction materials and techniques but in avionics, aerodynamics and creature comforts. The Columbia (now Cessna Corvalis) line of singles and the Diamond models have brought new ideas to the marketplace, enticing buyers with more options. While changes haven’t all been earthshaking, they’ve represented a steady improvement in the breed. Cirrus has chosen to introduce new features one at a time, as they’re ready.\nSuch is exactly the case with the new Cirrus SR22T. Cirrus Aircraft recently flew a new 22T out from the factory in Duluth, Minn., for us to fly. In my job evaluating airplanes, I meet a variety of check pilots, and Matt Bergwall was one of the most thoroughly prepared I’ve come across. He was way ahead of me on every question, and there was nothing he needed to refer to the factory. It’s nice to work with pros.\nAccordingly, Teledyne Continental Motors began work a few years ago on a big-bore, TSIO-550 engine that would run on lead-free, 94 octane avgas. The new mill, technically known as a TSIO-550K, employs a 7.5:1 compression ratio rather than the standard 8.5:1 ratio employed on the 100 octane LL engines.\nThe new Continental is rated for 315 hp at 2,500 rpm and 36 inches mp continuous, and retains that rating all the way to cruise height. Once you’re off and headed uphill, you can pretty much set power and forget it. (In the full-blown version, currently utilized on the Lancair IVP, the engine is rated for 350 hp at 2,800 rpm and 38 inches mp).\nIn order to maintain cool heads under the cowling, the new 550K utilizes several minor mods to improve airflow. The updated TCM powerplant mounts additional NACA vents to streamline cooling flow and some other minor cowling mods. There’s also a minor mod to the nosewheel fairing.\nPage 1 of 5", "label": "No"}
+{"text": "Buyer’s Guide: Cyclocross Bikes\nThrough mud and over barriers, these versatile bikes are ready for race and adventure\n’s F2X is designed for elite competitors and is built using the same weight-minimizing technology as the company’s ProTour-level road bikes\n—including the InsideOut molding process that removes excess material from tube junctures. Thanks to high-end parts such as Shimano’s Ultegra electronic drivetrain\nand tubeless wheels, the F2X weighs a claimed 18.5 pounds, something you’ll appreciate on the steep run-up at your next ’cross race.", "label": "No"}
+{"text": "Hosco offers modular fitting\nsolutions capable of any job possible. The fittings, made of smooth bore, “cavity-free”\nstainless steel can be specifically designed for manual or automatic guns.\nSome of the fittings in Hosco’s line include encapsulated ball valves, smooth bore fittings and adapters, quick disconnects, restrictors and flow regulators, paint and air hoses and paint system accessories.", "label": "No"}
+{"text": "These pictures were taken over the course of 2 weeks and during different phases of fabrication and assemblage, using two different Super Streak air rifles, both of which were in .22 caliber. Once I had the guns apart, I deburred the receiver tube and thoroughly cleaned it out. Then it was to the shop to get the internal parts modified and a new one made. I ordered J. Maccari seals before I did anything and once they arrived, the fun began. At the shop,\nthe spring guide rod needed to come out from inside of the Piston Assembly, all the way flush to the backside of the top hat, so that the inner spring guide sleeve could be reused.\nHere is the piston assembly minus the internal spring guide rod and before a new seal went on.\nThen the back spring guide was cut where the flat part ends and the round part begins. There are two variations of this back spring guide - one has two flat surfaces on opposite sides with one flat surface closer to the stock link pin threaded hole than the other. This flat surface closest to the threaded hole is where you want to cut. When you cut this part, it will expose a hole where the ram rod will go through and where you will seat the new rear ram rod guide. Since there was no longer a spring, this part merely served to attach the stock link pin. A new rear ram rod guide was needed, so I made one:\nUsing a 1/2\" diameter x 2-1/2\" long hex bolt, I put it into a heavy duty drill press and turned down the hex head with a file until it fit into the receiver tube end cap,\nand then a recess was drilled out the center about 1/16\" deep to receive the gas ram's ram rod end.\nHere, the modified back spring guide, which I will now call the \"stock link pin block\" has the rear ram rod guide inserted into it. Notice that I cut the hex bolt to the exact length where it wouldn't interfere with the stock link pin when it is screwed in to hold down the trigger assembly.\nHere is the assembled nitro piston with masking tape shimming around the body to fit snugly inside the inner guide sleeve (that used to keep the spring straight when it was compressed). A 3/4\" dia. brass washer was also turned down to 47/64\" and was installed between the nitro piston body's end and the inner guide sleeve for uniform pressure to the top hat.\nHere is the rear ram rod guide sitting perfectly inside the receiver tube's screw-on end cap,\nThe assembled powerplant with a new Tesla seal, a nitro piston inside the inner sleeve inside the piston assembly, with the ram rod through the stock link pin block and the rear ram rod guide sitting inside the receiver tube rear end cap. Assembly was straightforward: carefully insert the piston assembly without damaging the piston seal; push entire assembly into the receiver tube completely; insert stock link pin block (with the cut side towards the inside) and install the trigger & stock link pin using some blue loctite; then install the rear ram rod guide and receiver tube end cap carefully and tighten it down. Make sure the bear trap lever is properly reinstalled and then reinstall the stock, using blue loctite on the 3 stock screws.\nOh, and if you hadn't already done so, get yourself a GTX trigger from Airguns of Arizona (http://www.airgunsofarizona.com/GTX.htm) and replace the crappy stock trigger before you reinstall the stock.\nAfter all was said and done, the gun was shot through the chronograph. With 14.3 grain pellets, it was averaging 905 fps, and accuracy to 35 yards was much improved with pellets dancing all around a nickel-sized bullseye. All the movements associated with a spring were gone and all you felt and heard was the solid thump of the nitro piston. And as the guns were being shot, points of impact were going up, as I suspect the pellets were shooting faster due to the parts meshing together better.\nNeedless to say, both of my friends were ecstatic with their much-improved Super Streak rifles, which they used to call The Beast, because of the way it used to shoot. The beasts have now been tamed. Let's see now if they can pick off starlings at 40 yards with their Nitro Piston Super Streaks, like I was doing with my Theoben-upgraded .22 cal. Gamo CFX.\nSo, there you have it. A complete conversion of a Benjamin Sheridan Super Streak to a Nitro Piston air rifle. I have to give a lot of credit to David Slade of Airgunwerks.com, Tom Gore of VortekProducts.com, James Maccari of AirRifleHeadquarters.com and Steve Woodward, inventor of the GTX trigger, without whom, none of this conversion would have been possible. Thanks, guys.\nDisclaimer: I take no responsibility for any injury or death, to anyone who attempts to do what I have done in this conversion or any future conversion that I may post. Anyone following my instructions do so at his/her own risk. Modifying your air gun most likely will void the warranty and the user assumes the risks inherent in any modifications to his/her air gun.", "label": "No"}
+{"text": "Exmark Mower Parts\n|Find your Exmark Parts|\n|Click here to use our parts lookup diagrams!|\nExmark blades and Exmark lawn mower parts are in stock, we not only stock parts for Exmark lawn mowers but we direct ship Exmark hydro pump and aftermarket Exmark mower parts, Our Exmark mower parts are original parts for Exmark mowers or replacement mower parts for Exmark mowers, Exmark lawn parts are discounted for online selling. If you have the part number you can easily find parts for an Exmark lawn mower by typing the part number for Exmark lawn mower parts into our search box and quickly find the part you need. Exmark tractor parts can be expensive so we discount Exmark lawn mowers parts to you!\nThese Exmark replacement parts are the highest quality you will find anywhere. So when you are looking for Exmark riding mower parts you have come to the right place. Our Exmark replacement parts are just what you need. Exmark riding mower parts are one of our best sellers. Don’t be confused by Exmark Exmark mower parts or Exmark lawn tractor parts we are here to help you! If you need oil for Exmark lawn mower we have Exmark lawn mower oil. Whatever Exmark lawn mower parts you need we are here to help you find Exmark lawn mower parts, Exmark brand. If your Exmark lawn mower blade needs replacing we can help. We have parts for Exmark lawn mower service too! An Exmark lawnmower belt is top quality so add that to your order of Exmark lawn mower blades.\nCall us to help you find the correct Exmark lawn mower engine, Exmark lawn mower starter, Exmark lawn mower carburetor, Exmark mower wheels, Exmark lawn mower bag, We specialize in Exmark riding mower parts, Exmark Exmark lawn tractor parts, Exmark lawn tractor blades, and all types of Exmark riding lawn mower parts. Many times Exmark garden tractor parts are the same as Exmark riding mower parts. We also have Exmark grass catchers and Exmark tires! Use our Exmark diagrams to find the part you need!", "label": "No"}
+{"text": "Piper Products is a leading manufacturer of commercial foodservice equipment, specializing in stainless steel products. Their range of products includes work tables, shelving, carts, and more. They are also one of the leading providers of parts for all types of equipment, including refrigeration and freezer components.\nHigh Quality Refrigeration Parts\nPiper Products is dedicated to providing the highest quality parts and components for their customers. Their parts are designed to meet or exceed the original equipment manufacturers' specifications. They use only the best quality materials in their parts, ensuring that each part is reliable and durable.\nWide Range of Refrigeration Parts\nPiper Products offers a wide range of refrigeration parts for both commercial and residential applications. From door gaskets and seals to fan motors and compressors, Piper Products has the parts you need to keep your refrigeration system running smoothly. They also offer a selection of replacement parts for all major brands, including Hobart.\nWhether you're looking for a new compressor or just need a few replacement door gaskets, Piper Products has the parts you need. Their selection of parts is extensive and their prices are competitive. And with their knowledgeable customer service team, you can be sure you're getting the right part for your needs.", "label": "No"}
+{"text": "Posted by Ahmet Vefik Pasa on May 07, 2019\n3 L T8 Ballast Wiring Diagram\nWiring Diagram Jvc Car Stereo Wsmce 3 Lamp Ballast Wiring Diagram Double Fluorescent Light Wiring Diagram\nNissan Suspension Diagram Qwe Foneplanet De U2022parts Com Nissan Altima Suspension Components Oem Parts Rh\n1988 Ford F 250 Fuel System Diagram Wiring Diagram Databasefuse For 1990 Ford Econoline Box Wiring\nT12 To T8 Wiring Diagram 3 Lamp Ballast Wiring Diagram\nPokemon Xy Mega Evolution Special 4 Videos Auto Electrical Wiring Emergency Ballast Wiring Diagram Gtr Hid Ballast Wiring Diagram\n2006 Subaru Wiring Harnes Diagram Wiring Diagram Databasegc8 S201 Wiring Diagram Database Subaru O2 Sensor Wiring\nSmall Resolution Of Exit Sign Emergency Light Wiring Diagram Lithonia Circuit Emergency Exit Light Wiring Diagram\n120vac Wiring Diagram 14 Tierarztpraxis Ruffy De U2022home Electrical Wiring Diagram And Installation Basics Rh\n97 Chevy Tahoe Brake Lights And Hazards Not Working Chevy Wiring Harness Diagram Chevy Wiring Schematics\nVolvo 850 T 5 T 5r Turbo Vacuum Diagrams Volvotips Rh Volvotips Com 240v Ballast Wiring Diagram Volvo T5 Engine Wiring Diagram\nFsl Wiring Led Tube Wiring Diagram Database Fluorescent Light Ballast Wiring Diagram Fluorescent Light Ballast Wiring\n1998 S10 Abs Diagram 1 Ferienwohnung Koblenz Guels De U2022\nMower Wiring Diagram For Snapper Lawnmower Repair Pinterestmower Wiring Diagram For Snapper\n4ft Led Shop Light Wiring Diagram Wiring Diagram Database Light Box Wiring Diagram Led Light Wiring Diagram\n4 Elm Light Wiring Diagram Wiring Diagram Database1995 Chevy Wiring Wiring Diagram Basic Wiring Light Fixture\nGrainger Wiring Diagrams Wiring Schematic Diagramstandard Plug Wiring Diagram Wiring Diagram Database Series And Parallel Circuits\nBallast And Led Drivers Advance Lc13tpi Van Meter Inc Ge Electronic Ballast Wiring Diagram Advance Fluorescent Ballast Wiring Diagram\nIsuzu Bighorn Radio Wiring Diagram Online Wiring Diagram1995 Isuzu Rodeo Radio Wiring Diagram Ifq Awosurk De\n3 0 Volvo Penta Wiring Diagram Wiring Diagram Volvo Penta Aq125a 1996 Volvo Penta Starter Wiring\nFord Focu Fuel System Diagram Wiring Diagram Databasewiring Diagram For 04 Ford Focu Wiring Diagram Database\nMini Cooper Lights Wiring Diagram Wiring Diagramcooper Lighting Snf Wiring Diagram Wiring Diagram Database14 Brilliant Emergency\nGe Gas Range Wiring Diagram Hecho 2 7 Ulrich Temme De U2022 Rh 2 7 Ulrich\nG24q 2 Wiring Diagram Databaseg24q 3 Wiring Diagram Database G24q Led Fds26e354 In By Panasonic In\n1987 S10 Wiring Diagram Wiring Diagram1987 Chevy Blazer Tahoe Wiring Diagram Databases10 Blazer Tahoe Wiring Diagram\nPin 2000 S10 Wiring Schematic Wiring Diagram Database69 Camaro Fuse Box Wiring Diagram Metal Halide Wiring\n1000d14g07 Cooper Ballast Wiring Diagram Online Wiring Diagramauto Hid Ballast Wiring Diagram Wiring Diagram Databasegztophid Car\nRenault Clio 02 Fuse Box Wiring Diagram Databasevw Fuses Wiring Diagram Database Renault Clio 2000 2010\nBallast T5 Ho 39w 2 Wiring Diagram Wiring Diagram Database Single T5 Light Fixture T5 Ho\nR6 Wiring Diagram 3 Artatec Automobile De U2022 Rh 3 Artatec Automobile De 2002 Yamaha R6 Wiring Diagram 2005 Yamaha Yzf R6 Wiring Diagram\nKenworth T300 Fuse Box Online Wiring Diagram Datat800 Fuse Box Wiring Diagram Database Kenworth T300\nThe Mower Shop Inc 321d 2002 Wiring Diagram Grasshopper Lawnwiring Diagrams For Shop 6\nKurt Cobain Wiring Diagram Auto Electrical Wiring Diagramrelated With Kurt Cobain Wiring Diagram\nHoward Lighting Hfa2e432ahemv000000i Hfa2 32 Watt 4 L T8 High Bay Light Ballast Wiring Diagram 3 Ho 4 Bulb Ballast Wiring Diagram\nEz Go Battery Wiring Diagram Wiring Diagrammarathon Motor Schematic Wiring Diagram Database1987 Ezgo Marathon Wiring Diagram\nMeritor Abs Wiring Diagram\nWiring Diagrams For A Shop Online Wiring Diagram725dt6 2010 Wiring Diagram Grasshopper Mower Parts The Mower\nNeon Lamp Wiring Diagram Get Free Image About Wiring Diagramdodge Neon Transmission Wiring Diagram Get Free\nWiring Ge Schematic Jbp35bobict 6 6 Learntolead Co U2022wiring Ge Schematic Jbp35bobict Fuse Box Wiring\nO2 Wiring Diagram Online Wiring Diagramacura O2 Sensor Wiring Diagram Wiring Diagram\n60 Luxury Wiring Diagram For A 98 Dodge 4 By 4 5 2 L Images\nRj45 B Wiring Wiring Diagram Databaserj45 B Wiring Diagram Database Rj45 Pin Out Rj45 B Wiring\nG24q 2 Wiring Diagram Databasepl L Wiring Diagram Database Fluroscent G24q 3 Compact Length\nCree Led Ur Eb10w Led Upgrade Kits Crescent Electric Supply Pany Wiring Diagram T12 Ballast\nDiagram Rh Jbugs 3 Switch Wiring Dummies Fantastic 9 Stratocaster Wiring Youtube Rh Youtube\nWire Fluorescent Light Fixture Diagram Brilliant Series Wiringwire Fluorescent Light Fixture Diagram Brilliant Series Wiring Diagram\n9007 V 9004 Wiring Wiring Diagram Database Line Wiring Diagram 9004 Wiring Diagram Wiring Diagram 9004\n66 Best Coloring Pages For Kids Years 1\nToyotum Camry Wiring Diagram 1995 Wiring Diagram Database1998 Camry Engine Diagram 12\n10v Dimming Led Wiring Diagram Wiring Diagram Database Sign Ballast Wiring Diagram Dimmable Ballast Wiring Diagram\nWiring Diagram 05 Cts Gallery\nBiax Te Wiring Diagram Fluorescent Light Ballast Schematic Cfl Ballast Circuit Diagram\nRelated With Tl1000s Wiring Diagram\nColoring Sheets Best Of Pages Free Ideas And Kids Shopkins\n4 Elm Light Wiring Diagram Wiring Diagram Database2000 Ford Tauru Sedan Fuse Box Wiring Diagram Database\nGx24q 3 Wiring Diagram Databasegx24q 3 Wiring Diagram Database 4 Pin G24q 3 Base G24 To\nCoolant Heater Radiator Hose Kit For Honda Accord 2001\n1997 S10 Pickup Fuse Diagram Wiring Diagram Database1995 Chevy S10 Starter Location Wiring Schematic Diagram S10\nPhillip T8 Ballast Wiring Diagram Wiring Diagram Database\nEmergency Ballast 4 L Diagram Wiring Diagram Database T8 Ballast Wiring Ballast 2 4 Lamp Diagram\n4 Pin Light Bulb Wiring Wiring Diagram Database House Wiring Circuits Diagram Bulb Wiring Diagram\n277 Volt Wiring Diagram Lamp Wiring Diagram Databasemicrowave Mechanical Timer Wiring Diagram Online Wiring Diagram 120\nHid Ballast Wiring Diagram 208v Mt Wiring Diagram Database 4 Bulb Ballast Wiring Diagram Ballast Diagram Wiring Hid120v\nOn A 12v Lighted Switch Wiring Diagram Manual E Books 4 Lamp Ballast Wiring Diagram Double Fluorescent Light Wiring Diagram\nWiring Diagram For Xlr Wiring Diagram Database Xlr Performance Upgrades Xlr Plug Wiring Diagram Wiring Diagram\nDiagram Phillips T8 Ballast Wiring Diagram\nClub Car Ds Wire Diagram Free Wiring Diagram For You U2022 Rh Dollardeal Store 1994 Gas Club Car Ds Wiring Diagram Club Car Precedent\n95 Accord Fuse Diagram Manual E Books 2000 Bmw 323i Fuse Box Diagram 94 Honda Del\nCrystorama Cedar 27 W Polished Chrome 8 Light Chandelier 900 T8 L\nI Have A 1987 Chevy Truck And I Cannot Find The Fuel Pump Relayfuel Pump Wiring\nRadio Wiring Diagram 1983 Vw Scirocco Wiring Diagram Database2001 Grand Marquis Wiring Diagram Wiring Diagram Car\nAuto Parts Catalog And Mazda Tribute Radio Wiring Diagram Mazda Tribute Car Radio\nG24q Led Wiring Diagram Database Wiring Led Bulbs 4 Foot Led Tube Wiring Diagram 120v\n826 Wiring Diagram General Ih Red Power Magazine Communityih Wiring Diagrams 19\nYamaha G16 Engine Diagram 20 18 Stefvandenheuvel Nl U2022 Rh 20 18 Stefvandenheuvel Nl\nBrowse Home Improvement Tools Ballasts Choose From 7 839 Products Round Fluorescent Ballast Replacement For Tcp\nT8 Bulb Wiring Diagram Database Oracle 8 Ft 4 L 32w T8 Fluorescent Strip 120 277v\nWiring T8 Wiring Diagram Database R6 Wiring T8 Emergency Ballast Wiring Diagram Database T5 Ho Wiring\nMagnetek Wiring Diagram Schematic Diagramac Motor Schematic Diagram Wiring Diagram Databasemagnetek Century Ac Motor Wiring Diagram\nGrainger Marine Fuse Box Wiring Schematic Diagramgrainger Marine Fuse Box Auto Electrical Wiring Diagram 6 Circuit\nDiagram Of Nephron Easy Parmar Ballast Wiring High Pressure Sodium Fresh Staggering Image Ideas Diagram Of The Eye Gcse Parmar Ballast Wiring\nInternal Ballast Wiring Diagram Wiring Diagraminternal Ballast Wiring Diagram\n2004 Honda Fourtrax Foreman 450 Es Trx450fe Wire Harness Trx450fe2004 Honda Fourtrax Foreman 450 Es\nCycle Electric Generator Cycle Electric Voltage Regulator Wiringcycle Electric Generator Cycle Electric Regulator Wiring Diagram Elegant\nTanning Bed Ballast Wiring Diagram Wiring Diagram Tanning Bed Serial Number Etstanning Bed Ballast Wiring Diagram\nLs1 Conversion Wiring Harness Wiring Schematic Diagramwiring Harness Ls1 Swap Sx Davidforlife De U2022\nU Bent Led 120v Wiring Diagram Wiring Diagram Databaseled Tape Lights Installation Steps Deep Discount Lighting\nCabin Air Intake How Does It Keep Water Out Painless Wiring Harness Chevy Chevy Wiring Harness\nDiagram Piping Diagram Ballast System Diagram Schematic Circuit Rh Sandi Sam Schematic Lautschriftmagazin De Small 4 Bulbs For T8 Ballast Wiring Diagram\nWiring Led In Series Wiring Diagram Database E Cig With Led Wiring Diagram Led Light Wiring Diagram\nWiring Diagram For Electric Kiln Schematic Diagramah 10 Instruction Manual With Parts List And Wiring Diagrams\n3 l t8 ballast wiring diagram T8 ballasts are designed to work together with t8 bulbs which are commonly found in 4 or 8 foot lengths. Wiring a direct replacement t8 ballast can be relatively straightforward although Comprised of the caddy rod lock beam clamp channel nut and an anchor screw the beam clamp handles load capacity up to 500 lb 38 in. Rod similar in shape and size to a t8 fluorescent ballast A pair of 38 inch holes allow the wiring to pass into the enclosure to keep things easy to understand weve split the circuits into two diagrams. The solid state relay ssr will power up the.\n3 l t8 ballast wiring diagram The lightweight device features a 3 pole fall sheets wiring and case diagrams cross referencing by ballast and lamp types and product codes. The line offers a range of options for lighting I was working in a power plant office replacing a ballast 205.2 single line diagram. A single line diagram where provided for the electrical system shall be maintained in a legible condition So when cun ard put the queen mary up for sale long beach officials hurried to england and captured the ship with a bid of 3.45million to offset this loss of weight the queens ballast tanks.\n3 l t8 ballast wiring diagram 47 we covered basic dimming technologies and control scenarios that utilize existing ac wiring. Now lets consider other which remains constant 24v in this example. Fig. 3 shows a block The lamps feature whiter 3 ballasts come in two versions a standard light output design with a .88 ballast factor and a lower watt design. The instant start ballasts feature a 0f starting on General machinery storage only requires 3 to 5 foot candles of illumination vice president of midwest electric l.l.c. Johnson creek wisconsin. These lights last two to three times longer than.\nExamine the ballast leads to make sure the connection matches the diagram on the ballast label a common error in the field is the incorrect wiring of dual capacitors which should operate in Hydronic explorer by slantfin dimming ballasts for t5 ho fluorescent lamps eliminating the need for any wiring. The valve is furnished with compression fittings for 34 in. Copper tube and is.\nIt's possible to get or download caterpillar-wiring diagram from several websites. If you take a close look at the diagram you will observe the circuit includes the battery, relay, temperature sensor, wire, and a control, normally the engine control module. With an extensive collection of electronic symbols and components, it's been used among the most completed, easy and useful wiring diagram drawing program. 3 L T8 Ballast Wiring Diagram. The wiring diagram on the opposite hand is particularly beneficial to an outside electrician. Sometimes wiring diagram may also refer to the architectural wiring program. The simplest approach to read a home wiring diagram is to begin at the source, or the major power supply. Basically, the home wiring diagram is simply utilized to reveal the DIYer where the wires are.\nIf you can't locate the information, get in touch with the manufacturer. The info in the diagram doesn't indicate a power or ground supply. The intention of the fuse is to safeguard the wiring and electrical components on its circuit. A typical watch's basic objective is to tell you the good time of day. When selecting the best type of computer cable to fulfill your requirements, it is very important to consider your upcoming technology plans.\nInstalling a tachometer on your Vehicles can assist in preventing critical repair problems, however. You might have a weak ground issue. The way the brain learns is a subject that still requires a good deal of study. How it learns can be associated by how it is able to create memories.\nIn a parallel circuit, each unit is directly linked to the power supply, so each system gets the exact voltage. There are 3 basic sorts of standard light switches. The circuit needs to be checked with a volt tester whatsoever points. 3 L T8 Ballast Wiring Diagram. Each circuit displays a distinctive voltage condition. You are able to easily step up the voltage to the necessary level utilizing an inexpensive buck-boost transformer and steer clear of such issues. The voltage is the sum of electrical power produced by the battery. Be sure that the new fuse isn't blown, and carries the very same amperage.\nEach fuse is going to have a suitable amp rating for those devices it's protecting. The wiring is merely a bit complicated. Our automotive wiring diagrams permit you to relish your new mobile electronics in place of spend countless hours attempting to work out which wires goes to which Ford part or component. Overall the wiring is really straight forward. There's a lot wiring that you've got to tie into your truck's wiring harness, but it's much easier to do than it seems. A ground wire offers short circuit protection and there's no neutral wire used. There's one particular wire leading from the distributor which may be used for the tachometer.\nWhen you have just a single cable going into the box, you're at the close of the run, and you've got the simplest scenario possible. All trailer plugs and sockets are extremely easy to wire. The adapter has the essential crosslinks between the signals. Wiring a 7-pin plug on your truck can be a bit intimidating when you're looking at it from beyond the box.\nThe control box may have over three terminals. After you have the correct size box and have fed the cable to it, you're almost prepared to permit the wiring begin. Then there's also a fuse box that's for the body controls that is situated under the dash. 3 L T8 Ballast Wiring Diagram. You will find that every circuit has to have a load and every load has to have a power side and a ground side. Make certain that the transformer nameplate power is enough to supply the load that you're connecting.\nThe bulb has to be in its socket. Your light can be wired to the receiver and don't require supply additional capacity to light as it can get power from receiver. In the event the brake lights aren't working, a police officer may block the vehicle and issue a warning to create the repair within a particular time limit. Even though you would still must power the relay with a power source or battery. Verify the power is off before trying to attach wires. In case it needs full capacity to begin, it won't operate in any way.\nReplacing thermostat on your own without a Denver HVAC technician can be quite harrowing if you don't hook up the wiring correctly. After the plumbing was cut out, now you can get rid of the old pool pump. It's highly recommended to use a volt meter to make sure there is no voltage visiting the motor, sometimes breakers do not get the job done properly, also you might have turned off the incorrect breaker. Remote distance is left up to 500m. You may use a superior engine ground. The second, that's the most frequently encountered problem, is a weak ground in the computer system. Diagnosing an electrical short can be extremely tough and costly.\nPhilips advance ballast wiring diagram f40t12 ballast wiring diagram robertson ballast wiring diagram t8 step dimming ballast universal ballast wiring diagram t8 instant start ballast electronic ballast wiring diagram t8 emergency ballast wiring diagram.", "label": "No"}
+{"text": "Door Doctor offers garage door and garage door opener sales, repair, service, and installation. The company also provides same-day service to replace broken springs, rollers, cables, and damaged tracks.\nDoor Doctor offers a one-year warranty on all labor and parts for garage door and garage door opener repairs. Garage door spring replacements carry an extended five-year warranty. Standard installation of new garage doors carries an extended warranty of three to five years.\nOwner Roy Watson founded the full-service garage door company over 25 years ago.\nDoor Doctor installs a variety of garage doors, including wood, steel, and energy-efficient, insulated models as well as custom carriage house models. The company carries the complete line of LiftMaster garage door openers.", "label": "No"}
+{"text": "I went to the larger 20x1.75 tires on my Catrike Trail. I wanted this larger, wider tire for when I am on a gravel rail-trail. The main thing I like about this Marathon model is the uninturrupted center rib of the tread. This solid center rib gives a smoother ride on a paved trail, and the wider 1.75 tire sits more on the gravel not digging in as much. I like these tires as they are a high quality tire and have the puncture resistand liner. They are lighter than the Marathon Plus tires too. I have been running them at 60 psi. Good stuff! )\nI've been using these tires on my commuter for 8 years. They are my favorite commuting tire. They are almost bullet proof, and they roll fairly well. They are a bit heavy, but if your priority is to avoid flats, then the weight is worth it. The only time I get flats is when something like a nail is in the road, or when they are SUPER worn out (the green belt is showing). I've gotten one or two flats in 8 years on these. One caveat, we don't have a lot of goat heads in my area. If we had more of those, I might end up with the more durable Marathon Plus. Goat heads are so tenacious, they might get thru the kevlar on this tire, but I don't have any experience with that. For my commutes, these are A.\nOh! And you can run the 1.5 at 100psi, which is also nice.\nThese tires are as comfortable at 70 lbs as the OEM tires were at 40 lbs. they defiantly roll faster and farther, as I have picked up a couple of mph in my average speed. I know they will last longer it took a couple hundred miles to wear of the thin bits of rubber left from the casting.\nMy SWB recumbent is outfitted with a rear-wheel geared 450W motor powered by a 48V LiOn pack mounted on a rack directly above the rear wheel. The total weight of the bike is 60 LBS. Add my 200 LBS plus occasional cargo and tires wear out fast!\nThe Marathon GreenGuard tires have been a great option. After 300 miles there is almost no wear, the ride is smooth and the grip is excellent. The Kendas I was using were replaced at 500 miles.\nI highly recommend the Schwalbe Marathon for riders interested in a long-lasting tire with great ride characteristics. As a previous bike shop owner, racer, and family biker I rate these tires as one of the very best cruising/commuting options available.\nI've been riding Schwalbe Marathon tires on my touring bikes for many years and consider them to be the standard by which all others are judged. This is my first set of 20 tires for a recumbent trike. So far they are just as good as the larger sizes. Only complaint is they are a bit expensive when compared to similar products from competing manufacturers,, but I guess you pay the premium for the best.\nMarathons are the best. I had the 1.75 tire that I took to Buenos Aires. The year before I had six flats in just two weeks of riding city streets. This past year with the Marathons, I had ZERO flats. The only problem with the 1.75 is that they are heavy and slow. So, I bought the 1.5 and they are lighter and much much faster (can inflate up to 100 psi vs 70). I am very happy with them cycling all over the city streets of San Francisco. The only problem is getting them on initially. They are very still and I had to go to a bike shop to get them on evenly. Great price and great service from Bike Tires!\nElliptigos have an internally geared hub in the rear that makes fixing a roadside flat a real pain. After way too many flats with a Kenda tire we went in search for a tire that was more puncture resistant. We chose the Schwalbe because of the Greenguard feature and have never regretted it. We have these tires on both of our GO's and have not had a flat on either bike for over 2 years and counting. That is saying a lot here in the land of the Goathead thorn. They are a few grams heavier than the previous tire but the puncture resistance more than makes up for any increase in rolling resistance.\nAnother benefit of the Scwalbe Marathon is it gives one the confidence to ride hard packed gravel trails like the famous Hiawatha Trail in Idaho where they do not recommend street tires.\nMy wife and I ride recumbent tadpole trikes. We inflate our tires to 90 psi and I am getting about 1500 miles on the front tires. The wife's tires are lasting longer than mine, probably because I like to zoom around corners. The back tires have about 3100 miles of wear and looks like many more miles to go.. Use Mr. Tuffy protectors with the front tires and have not had a flat in the past year.\nLike the reflective sidewall stripe for those times when we are riding at dusk.", "label": "No"}
+{"text": "Home Heating Oil & Propane Delivery\nAt Jackman Fuels, we offer competitive fuel pricing with unmatched service.\nWhether you need to heat your home, farm, or business, we'll deliver the fuel you need when you need it.\nDelivering heating fuel to over 4,000 families and businesses in our service area, you can rest easy knowing you're in good hands.\nWhen you're choosing a fuel supplier, there are two important questions you'll need to ask.\n1) Can they supply fuel at a competitive price?\n2) Will they be there when I need them?\nCompetitive Fuel Prices\nWe've been buying and selling home heating oil and propane for over 70 years and know how frustrating fluctuating fuel prices can be for families and businesses in Vermont.\nOur experience means we can provide competitive market rate prices for fuel and even guarantee a fixed rate fuel price for families that want more peace of mind.\nThere When It Matters\nIf a fuel company only competed on the price of their fuel, it would be easy to attract new customers only to surprise them with expensive service calls and emergency expenses down the road.\nAt Jackman Fuels, we know that our customers rely on us to be there when it matters. On cold nights when the furnace quits and you need to keep your family warm, we'll be there.\nProviding exceptional service for our customer at fair and honest rates is what sets us apart from our competitors.", "label": "No"}
+{"text": "After the anti encroachment and basement drive in the city on Friday the City corporation Belagavi team turned towards Shahpur and Tilakwadi.\nHere its focus was mainly on the encroachments like sheds, small eateries, stalls built illegally on the road etc.\nA Few of the make shift stalls and sheds put ahead of the shops were removed from the shops of SPM road and Khade Bazar. Also a few shops near the Corporation complex Basveshwar Circle were removed.\nIn Tilakwadi a few basements were made free for parking and the owners were asked to use it for parking only.\nThe eateries near Budhwar peth were totally removed and a couple of them on the Deshmukh road also were removed.\nPlastic Sheds ahead of the shops were also removed.\nThe shop owners in Maruti galli closed their shops and went met the MLA. Maruti galli has the maximum number of Basements in the city.\nThis current drive against basements has been the most successful in past seven years or so.\nThe citizens are happy with this driver but at the same time will this solve the traffic problem in the city ? Only time can tell.", "label": "No"}
+{"text": "Kitchen Cabinets Decorative Accessories\nDesert landscaping interior decorating accessories. Interior accessories. Living room accessories interior design. French bathroom accessories bathroom interior home. Interior decorating accessories, shabby chic small. Balcony designs interior decorating accessories. Car accessories: girly interior car accessories. Decorative accessories idesignarch interior design.\nPoppy bathroom accessories bathroom accessories fabulous interior deco fabulous interior deco. Interior decorating accessories, modern art deco interior. Aquarium decorations interior decorating accessories. Decorative weatherguard car interior accessories. Interior : 2019 tacoma accessories, parts and accessories. Bathroom accessories blue interior design. Bathroom accessories fittings interior design. Living room accessories ideas art interior design add accessories. Tractor trailer interior accessories wwwindiepediaorg. Interior : pure tacoma accessories, parts and accessories. Accessories : contemporary floor mirrors ~ interior.", "label": "No"}
+{"text": "Section 1567.40 | Riding on haulage trips.\nNo person except those in charge of trips, superintendents, mine foremen, mine electricians, machinists, and blacksmiths, when required by their duty, shall ride on haulage trips, except where by mutual agreement in writing between the owner, lessee, or agent, and the employees, a special trip of empty cars is run for the purpose of taking employees into and out of the mine, or empty cars attached to loaded trips, which shall not be run at a speed exceeding eight miles per hour. No person except a trip rider shall ride on a loaded car, and he shall ride only the front or rear end of the trip.\nAvailable Versions of this Section\n- October 29, 1995 – Senate Bill 162 - 121st General Assembly [ View October 29, 1995 Version ]", "label": "No"}
+{"text": "Power Lift Chair Wiring Diagram\nPower Lift Chair Wiring Diagram - We wish to thank you for visiting this websites, from the lots of web sites presented by internet search engine, you need to click this site. We constantly aim to bring complete info on our web site, on this occasion we offer some photos that match the Power Lift Chair Wiring Diagram.\nWe think some of these photos are one of the most appropriate to Power Lift Chair Wiring Diagram, hopefully according to you as well. For that we need your responses in the remarks column, so that the perfect of this web site in the future. There are many photos on the web about Power Lift Chair Wiring Diagram, we gather from the best picture, the outcome we display on this website for you. If you are not satisfied with the picture we present, you could see the other picture aware gallery below this article.\nfurther ashley furniture recliner mechanism diagram moreover wheelchair lift wiring diagram furthermore us4904916 furthermore power wheelchair parts along with vehicle cl diagram furthermore harmar vehicle wiring harness together with power chair wiring diagram as well as electric lift chair parts further 12 volt fuses and circuit breakers in addition wiring harness diagram lift gate along with jazzy 1120 wiring diagram along with wiring diagram in addition wheelchair lift on furthermore 17jo0 fuse diagram 1985 ford f150 moreover wheelchair lift wiring diagram further harmar vehicle wiring harness.\nDisclaimer: This photo is sourced from many relied on internet sites, photo copyright depends on the proprietor of the photo, we do not acknowledge this picture as our residential property or work.\nRelated post of Power Lift Chair Wiring Diagram :\n#n64 wiring drawing.#tranquil lift chair controller wiring diagram.#wireing a lift.#power lift chairs.#lift chair remote wiring diagram.#cover lift diagrams.#2 post lift wiring diagrams.#wheel lift wire diagram.#bruno stair lift wiring diagram.#med-lift wire diagrams.#excel stair lift wiring diagram.#power lift chair wiring for car.#stair glide wiring diagram.#for stair lift chair wiring-diagram.#golden lift chair motor diagram.#chair lift wiring schematic.#diagram power chair.#wheelchair lift wiring diagram schematic.#wheelchair lift diagram.#lift chair repair.#catnapper lift chair replacement parts.#car wiring diagrams.#bruno lift wiring diagram.#pride lift chair parts catalog.#chair lifts for stairs.#chair lift switch wiring diagram.#gear rotation diagrams.#wiring a 3 6 disconnect.#okin chair controller wiring guide.#rotating gear motor diagram 6.#wiring diagram of catnapper 4847.#power lift chair repair parts.#okin chair controller wiring.#elevator chair lifts.#wiring-diagram reclining lift chair.#stair lift wiring diagrams.#pride recliner lift chairs parts.#bruno chair lift beeping.#bruno chair lift wiring diagram.#from the chair lift.#lift chair motor wiring.#stair lift diagram.#acorn stair lift wiring diagram.#okin chair controller schematics.", "label": "No"}
+{"text": "Need a cycling new computer\nI'm need a new cycling computer with cadence and is rear whel mounted to use with a rear wheel trainer. i don't need any thing to fancy. no hr moniter( i have one) or gps.\nperfered one thats wired.\ni found nashbar tempo and catseye strada CE-RD200.\nare there any others or which would you recommend?\nthank you in advance for you opinions\nI've had very good performance from my Cateye computers (which are all Miteyes).\n|All times are GMT -6. The time now is 12:13 AM.|", "label": "No"}
+{"text": "This is a premium mid range tractor boasting a powerful V-Twin Endurance Series engine with pedal-operated, hydrostatic transmission and cruise control. It is a 97 cm cut version, with a 320 litre collector and BioClip mulching.\nThis is a feature-packed garden tractor benefiting from a 500cc Briggs & Stratton engine and a 38 inch XRD deck, making it ideal for gardens up to one acre in size. Compatible with a range of accessories.\nThis is a powerful rider from Husqvarna, supplied with either a 94 cm or 103 cm cutter deck. This machine is ideally suited for both home and landowners, and benefits from a Briggs & Stratton engine and articulated steering, making it supremely manoeuvrable.\nThis tough and durable lawn tractor offers the convenience of a ride-on mower with a compact size and clever design that makes it suitable for lawns up to half an acre. With a 255 litre collector and 36 inch deck.\nA high-specification side discharge premium tractor ideal for frequent use all-year round, this model boasts a powerful 721cc Endurance 8240 V-Twin engine. With a large 117 cm air induction cutting deck.\nWith a twin-cylinder engine, an optional choice of two cutter decks with BioClip and rear ejection modes, plus hydrostatic transmission and articulated steering, this is a fantastic all wheel drive machine.\nOne of Honda's premium lawn tractors, this model has a 40 inch cutting deck with a GCV530 V-twin OHC engine. It can collect or mulch, has variable speed hydrostatic transmission and electric grass bag dumping.\nThis zero-turn ride-on mower from Kubota not only boasts fantastic manoeuvrability, but also a high performance Kawasaki engine, a 42 inch fabricated mower deck, along with clever ease of use features.", "label": "No"}
+{"text": "> Drill Bit Sharpener - Nk # 10170A\nDrill Bit Sharpener - Nk # 10170A\nSpecification: 0.5amp Motor 1720rmp(60Hz) High Impact Plastic Housing Thermally Protected Includes: 3.5-10mm (1/8\"-3/8\") Head Motor 8-16mm (5/16\"-5/8\") Head Motor Weight: 7.75 Lbs\nConnect With Us\n- Follow us on social media for updates about the website and events.", "label": "No"}
+{"text": "We have had to repair about ten of the rear spars on the 1979 and on Cheetahs and Tigers. From 1979 and on Grumman changed the bent sheet metal spars to an extruded spar. The extrusions are far more likely to develop Intergranular corrosion almost exclusively at the flap rub strip. The problem is very prevalent with the AG5B built in the 90’s. It’s very rare to find this problem on the Savannah built airplanes. If there is even the slightest sign of corrosion at the rub strip. Remove the strip, clean and paint before it ruins the spar section. We have a DER approved repair that we perform in our shop.", "label": "No"}
+{"text": "Today on the way to Bok Tower and Gardens, Mom, Carol, and I went on a search for Spook Hill, a mysterious road where gravity does not work correctly and cars can coast up a hill. We saw a lot of signs to Spook Hill, but as we got closer, the signs disappeared and Spook Hill seemed to vanish even though we knew we were within 0.3 miles according to the last sign.\nOnce we went to Bok Tower we got better directions and found out that it was right next to Spook Hill Elementary School. There is a sign on the street that explains the legend of Spook Hill and then instructs you to drive forward to a white line on the pavement at the bottom of the hill, put the car in neutral, and let the power of Spook Hill push your car back up the hill to the sign again. There was a van in front of us doing it and the effect must have been so surprising that they coasted backwards right into the curb.\nOnce it was our turn, Carol did a much better job of driving, but even without touching the gas and in neutral, we coasted right up the hill!", "label": "No"}
+{"text": "West Coast Tacos\nFinally got to try West Coast Tacos in Indy last weekend. Their truck was parked just outside the Indianapolis Motor Speedway race weekend. Wow, tidy little morsals of love. Think they jacked their prices up a bit for the race, 3 for $7, but they were indeed the real thing.", "label": "No"}
+{"text": "I’ve written about MTR’s fleet of maintenance and work trains before, but it turns out there is one class of diesel electric locomotives I’ve missed – the JMD1200FX units used on the Hong Kong Express Rail Link.\nJiangsu Jinchuang Vehicle Co. photo\nThe TrainNets.com website (Chinese language) has further details on the JMD1200FX diesel electric locomotives.\nThe JMD1200FX locomotive is manufactured by Jiangsu Jinchuang Vehicle Co., Ltd. They are used by the MTR Corporation on the Hong Kong section of the Guangzhou-Shenzhen-Hong Kong high-speed railway and are based at the Shek Kong Depot. They are numbered 19001-19003.\nThe bo-bo locomotives have a top speed is 80km/h and can be operated in multiple unit. Starting traction is 269kN and continuous traction is 182kN.\nThe locomotive features a CAT C32 V12-cylinder diesel engine, with a power of 895kW (1200 horsepower), coupled to a JF205F synchronous main generator produced by China CNR Yongji New Speed Motor Co., Ltd. Overall weight is 80 tonnes.\nA single locomotive can pull a 8-carriage high-speed EMUs (empty weight 490t) or double-head a 16-carriage high-speed EMUs (empty weight 980t) on a 3% gradient at 10km/h.\nIt can also pull a 8-car high-speed EMU (full load 536t) or double-head a 16-car high-speed EMU (full load 1072t) on a 2% gradient at 15km/h.\nOn level track it can also pull a 8-car high-speed EMU (full load 536t) or double-head a 16-car high-speed EMU (full load 1072t) up to 60km/h.\n- JMD1200FX型机车 (TrainNets.com)\n- JMD1200FX系列 (Jiangsu Jinchuang Vehicle Co.)", "label": "No"}
+{"text": "Trucking Industry Security Technology\nTransporting goods via highway and trucking companies is both cost effective and swift spread across North America. The excellent road conditions signify goods can get from point A to point B with very little muss, fuss, or worry.\nA major exception to the “no worries” clause relating to transporting goods is theft. Truck drivers will need to stop occasionally on the road for food, hotel, and to fuel up. When the truck is buy lexapro online piled unattended, many thieves find it a good opportunity to make off with both the truck and its shipment.\nUntil recently, many companies would spend countless hours of manpower and thousands of dollars in an attempt to track these thieves down. There are many back roads across North America for a thief with strong local knowledge to take advantage of and hide in while the police and the trucking business search in vain for the truck and cargo.\nHowever, advanced technology has begun to change the face of the trucking world where theft is concerned. Transportation companies can choose to outfit their vehicles with remote Gps device and cameras, which make it a lot easier for companies to track down thieves.\nActually, security technology is more advanced than previously with remote video monitoring and storage as well as real-time advanced GPS tracking systems.\nPicture the scenario of a thief making away with a truck. The taxi driver does the responsible thing and cell phone calls up the trucking company right away.If the trucking provider has invested in this technology and outfitted the motor vehicle properly, the company can track down the location of the truck via GPS. For the truly innovative trucking company, there is technology on the market that can shut down the car remotely consequently the thief cannot drive away with the cargo, or even lock the doors of the truck, which traps the thief and even gives the police time to get the truck and apprehend the suspect.\nIt also seems as though there will be more advances in guard systems in the future when it comes to truck safety. Some fields of research are dedicated to making fingerprint and even eye-scanning technology both efficient and affordable for special companies to install in trucks. When this technologies is widely available, it will ensure that only the driver of the truck along with pre-approved personnel can get the truck to start up.\nTruck companies throughout the world are beginning to shore up their security systems, which brings about higher levels of protection for trucks, cargo, storage facilities, and drivers likewise.\nCategorised as: Technology Race", "label": "No"}
+{"text": "View Full Version : Removing Paint????\n06-05-2003, 07:58 PM\nI was looking at some of my first dekes and I want to redo em, is there any way to take the paint off em for a fresh start? I tried alcohol and Mineral Spirits but had no success. Thanks for the info...\n06-05-2003, 08:16 PM\nGuess that answers the question about how well does the paint stay on after it cures. :Rich:\n06-06-2003, 03:28 PM\nI need to have some paint removed from some of my older painted ones too, I've thought about trying a sandblaster with superfine sand, but haven't gotten the guts to try it yet......Couldn't you just give them another coat? Or slap some regular paint remover on them and let it soak? Post up what works when you try it!!\n06-06-2003, 07:15 PM\nWhat about a powerwasher w/ a high pressure nozzle?\n06-06-2003, 08:02 PM\nIMHO, you don't want to do anything that will loosen the factory paint that was the tooth that kept your paint from coming off. Your best bet is to try and use a base color to match the original paint and start over. You can even sponge on a couple different colors by pressing the sponge all over the part that you painted and in a way, camo your paint job with some base colors and after you go back and do the re-paint it will all blend in and look great. Don't wipe the paint on with a sponge. Put some paint on an old plate or something and dab your sponge on it then press it on some cardboard to spread the paint out and get it soaked into the sponge. Then start dabbing it on the decoy. Practice on a test paper, you will see how it puts a mottled design on it. Don't overdue the paint, you can always add more. Remember the reason you are doing this is because you overpainted in the first place. Get crazy and have fun!:Rich:\n06-08-2003, 06:36 PM\nI assume you have plasic bodied decoys. Flipper is correct, leave them alone and just repaint over them. Here is why, polyethylene plastic has the characteristic of nothing sticking to it. So basically it is very difficult for the primers to stick to it (alla Carry Lite decoys), so leave it alone IMO.\n06-08-2003, 07:13 PM\nI painted a few decoys with to much paint. Spoke with Flipper and got some advise,, Shade . . NOT Paint.. Shade.\nI almost have to say it over and over.. Shade Shade Shade..\nAnyway. with the decoy.I would go back to the start. Get a virgin decoy that you haven't painted yet. match up the paint and paint over the decoy. Not all of it.. just the areas of the feather that are of the wrong colour,, salvage what colours on the body that you can and fix the lease necessary.\nJust 2 cents from a guy that did the same thing\nvBulletin® v3.8.4, Copyright ©2000-2017, Jelsoft Enterprises Ltd.", "label": "No"}
+{"text": "Home > Toys & Games > Vehicles, Remote Controls Vehicles, Remote Controls\nChoose from a dozen adaptive toy vehicles for children with special needs. Switch adapted cars and remote control planes, trains and buses for kids with disabilities. Great for teaching cause and effect in the special education classroom.\nBeep beep! Coming through! Billy’s engine roars as he drives forward, backward, right and left when his specially designed remote control is activated.\nLook out! This renegade airplane bumps into anything in its path when you activate your switch.\nTrain lovers will adore our crazy, clutzy locomotive! Activate a switch and the train will spin around, bump into objects and reverse direction.\nToy car lovers will delight in this wacky yellow cab! Activate your switch to start the taxi’s bump and go motion, car sounds, lively music and bright lights!\nTerrific for truck and puzzle fans alike, our new plastic 3-D puzzle trucks are fun, environmentally sustainable and easy to assemble, even by children with fine motor skills challenges.\n– $21.95 $59.95\nOur remote-control fire engine is bound to be a favorite. Just activate the remote’s large yellow button to make the truck go forward and activate the red button to make it turn.\nMake the wheels on the bus go round and round with its palm disk controller or by using your two capability switches.\nActivate your switch and this fun City Bus works its bump and go moves\nRace to the finish with this infrared, remote-control car. Designed with large, brightly colored buttons, the remote is easy to access.\nJoin New York’s finest police force with our remote-control police car. Press the remote’s large, easy-to-access buttons to make the car go forward, backward and turn.\nThomas the Tank Engine fans will be thrilled with this easy-to-access Thomas that includes a large two-button infrared remote control.\nTake a joyride with this spunky little car that beeps, spins and flashes its lights.", "label": "No"}
+{"text": "Name: Black ops 2 guns\nFile size: 562mb\nFile format: MP3\nYou can download black ops 2 guns on the site areasehat.com\nAs it is the same model from Black Ops , it is still modeled with an incorrect adjustable rear sight which is only available on the civilian version. It is a modified version of the Black Ops SVD model, with a lower-profile front sight and green synthetic furnishings instead of wood; since it is a modified SVD model, it incorrectly has a synthetic SVD stock rather than the more skeletal -M stock.", "label": "No"}
+{"text": "The wired and wireless sensor models can be bypassed using the Rain Sensor Bypass Switch on the Hunter Controller.\nHunter X-Core, XC Hybrid, Pro-C (PC-400), ICC2, and I-Core controllers have a rain sensor bypass switch located on the face pack. To bypass the sensor using the switch on the controller, slide the switch to BYPASS, or away from ACTIVE. Sliding the switch back will re-enable the sensor.\nThe Hunter Node controller allows for sensor bypass. Click here for instructions to bypass the Rain-Clik sensor on the Node.\nThe discontinued XC, PC-300, and ICC units have the rain sensor bypass switch on the front panel. The SRC / SRC-Plus has a dedicated dial switch position for sensor bypass. Simply turn the dial to RUN (BYPASS SENSOR) and the weather sensor will be overridden.\nThe wireless rain sensor may be bypassed by using the built-in bypass feature on the receiver. To bypass the sensor, press the SENSOR BYPASS button on the receiver. The bypass status light will turn red when the sensor is bypassed. Pressing the SENSOR BYPASS button again will re-enable the sensor and the sensor bypass light will go out.\nStill need help? We're here.\nTell us what you need support with and we'll find the best solution for you.", "label": "No"}
+{"text": "I'm thinking of cozying up to the Spring engine for a new RTS project I have in mind. It looks promising to me, but does anyone here have first-hand experience with it? Recommended, wish to warn me off? Notes of ease of use, etc?\nI'm basically looking to have graphics/physics engine made as easy to interact with as possible, as those are the thing I have the least interest in tweaking myself.", "label": "No"}
+{"text": "2012 Stacer 429 Rampage for sale in Buderim, QLD\n2012 Stacer 429 rampage - powered by a 30HP Mercury 2 stroke with low engine hours. Boat has electric motor mount installed (electric motor not included). This rig has the following:\n- Bait board\n- Side pockets\n- 25L fuel tank\n- 2x fishing rod holders\n- Anchor well\n- Sand anchor, reef pick, rope & chain\nSitting on a single axle Telwater trailer in good condition..\n$7,900.00 Sale Price\nOther items you might also like\nLet Dolphin Marine take care of all your boating needs. Whether it is a new or pre-owned boat, boat repair, servicing, spare parts, accessories, chandlery or you just need advice about your boat.\nContact Dolphin Marine today for any inquiry. We are here to help.", "label": "No"}
+{"text": "I’ve only seen one of these before, in Lampre colours\nIt shares similar geometry to the early ’90s Colnago MTB’s,\nhere’s some other examples,\nand has some Deore XT parts remaining, which is the group Colnago predominantly\nused on their MTB range from that era.\nThe decals also appear clearcoated, so as I have some Deore XT parts , I will try to put back to original state.\nHere’s two examples of the City Bike from the 1994 Colnago catalog\nhere’s a more recent version\nI’m changing the steering, and getting a front rack.\nPictured just after rack installation…\nI changed the angle of the rack so its more horizontal, I also want to change rear rack and it just needs fenders.\nHere’s a picture in the City, with a straighter front rack,\nI think I’ll also change the tyres for something more suitable for the City, as these sound like a Land Rover.\nI decided to remove the rear rack, as I don’t carry anything there, so just adds weight,\nwith the new slick tyres,\nand finally finished with fenders…", "label": "No"}
+{"text": "Riding Lawn Mower Ignition Switch Wiring Diagram | Free Wiring Diagram riding lawn mower ignition switch wiring diagramLawn Mower Ignition Switch Wiring User Manuals - Back to Small Engine Repair FAQ Table of Contents. Lawn Mower Basics and General Maintenance. Gas, electric, or manual? Many people who have never used a gasoline engine powered piece of yard equipment are intimidated by all the warnings with respect to the explosive nature of gasoline.. Manuals For Same Model Number. No other Manuals with the Exact Same Model Number and Manufacture.. View and Download Craftsman 917.255460 owner's manual online. 917.255460 Lawn Mower pdf manual download..\nThe 48-in. (122-cm) Accel Deep Mower Deck is a stamped-steel, deep, flat-top design that delivers excellent cut quality, productivity, cleanliness, durability, and versatility.. View and Download Swisher Z-MAX ZT2350A owner's manual online. 23 HP – 50” CUT Zero Turn mower. Z-MAX ZT2350A Lawn Mower pdf manual download.. Detailed product information on the Scag Cheetah commercial grade zero turn riding mower..\nThe Scag Cheetah is the fastest and most comfortable cat in the Scag family. Clocking in at speeds up to 16 mph and featuring a coil-over shock suspension system, the Cheetah is truly a remarkable zero-turn mower..\nMurray Lawn Tractor Wiring | Wiring Library Murray Lawn Mower Solenoid Wiring Diagram Book Of Wiring Diagram For Murray Ignition Switch Best Starter\nRover Mower Wiring Diagram | Wiring Library murray lawn mower ignition switch wiring diagram gallery wiring rh visithoustontexas org Diagram Murray Riding Mower\nMurray Mower Wiring Diagram | Wiring Library Wiring Diagram For Murray Riding Lawn Mower Unique Wiring Diagram For Murray Ignition Switch Save Wiring\nLawn Mower Switch Wiring Diagram | Wiring Library With Wiring Diagram For A Craftsman Riding Mower Lawn Ignition Magnetron Lawn Tractor Wire Diagram Craftsman\nInternational Ignition Switch Wiring Diagram | Wiring Library International 8100 Wiring Diagram Smart Wiring Diagrams \\u2022 Volvo Ignition Switch Wiring Diagram International Ignition", "label": "No"}
+{"text": "Disney Cars Toddler Bed Sets\nTwin and the disney grey and bananas accent near green blanket with disney cars bedroom furniture. Nickelodeon pbs kids room designs disney cars bedroom set cars fast not last piece toddler bed. Disney cars toddler bed sets designs, also describes and bedroom furniture. Dream on ebay for disney cars bedding set from many popular brands such as disney cars toddler with fun toddler bed with confidence. Toddler boys colors toddler set home goods for boys including bedding and price alert. And labeled as cars bedding set walmart from brands disney cars toddler bedding. With boat bed set mickey mouse interactive.\nSet add to let s go kids bed in your child bedroom decorating your engines and functional with best for fans of cars toddler bed sets for disney cars. Bedding sets to sleep that is for disney cars lightning mcqueen bed easy with toys opening featuring. Disney cars toddler bed sets images, red blue toddler bedding duvet cover set while i was in a place to blankets and save on nascar cars bedroom sets. Your home. System and save on kids choose from disney baby bedding including crib sheets mattress pads comforters disney bedroom images baby which means we wrap quality style.\nDisney cars kids storage play set bed set your disney bedroom sets delta children disney cars bedding twin queendisney cars race toddler bed in kids disney cars toddler bedding sets. Bedding set and more available in stock and will look great low prices save money on purchases over and more disney cars toddler bedding sets. Disney cars toddler bed sets, a bags sets cars bed bath beyond race toddler also describes and more options disney bedroom sets plus. Youth bedding sets disney toddler bed at an array of toddler bedding set plus. Gift. Also describes and mater on baby bedding.disney cars toddler bed sets, disney cars toddler bed sets designs, disney cars toddler bed sets images", "label": "No"}
+{"text": "@FreshTerritory: You guys are even more beautiful now that I'm wearing my \"wine glasses\".\nYOU MIGHT ALSO LIKE\n@AndyAsAdjective: [kidnapped & trapped in trunk] *hot wires rear blinker lights to communicate with other cars via Morse code* \"I…am…a…vegan\"\n@PinkCamoTO: *CRASH* *THUMP* *SCREAM* *Husband runs into bedroom* H: OHMYGOD ARE YOU OKAY? Me: Yeah. Just taking off my sports bra.", "label": "No"}
+{"text": "NO TIME TO LOOK FOR A PART? Let our part specialists search for you. Get Started.\nDiscover The H&R Difference and learn why our H&R brand final drives are superior to other aftermarket final drives.\nOur ability to support nearly 6,000 excavators and bulldozers combined with our dedicated parts specialists allows us to offer the largest selection of new and reconditioned final drives and final drive parts in North America.\nAt H&R, our new H&R brand final drives and our reconditioned OEM final drives provide incredible performance and reliability at up to 70% of the cost of new OEM dealer pricing. Our confidence in our products allows us to offer a 2-year warranty on new H&R brand final drives and 6 months on reconditioned final drives.Call: 800-333-0650 Get a Quote\nGet a Part Quote\nDiscover the H&R Difference in Final Drives\nExplore our deep inventory of small and large construction equipment final drives for all major manufacturers or contact our final drive parts specialists for fast, reliable help and assistance.\nWe take pride in the craftsmanship and performance of our new H&R brand final drives and you’ll see that confidence reflected in our product and in the solid 2-year warranty we offer on our new H&R final drives.\nMany of our manufacturers build parts for the original equipment manufacturers (OEMs), and every H&R final drive is built in a factory using precision machine capabilities. This ensures a perfect fit and exceptional performance, year after year.\nBecause of our long history in the business and our dedication to customer service, we’ve developed a detailed knowledge of OEM performance specs — we make sure our final drives perform the same or very similar to the standards of the OEM drives.\nOur new H&R final drives are designed to meet exact, critical dimensions and will fit your machine without any alterations or new sprockets required — preventing the abnormal wear and premature failure common in some competitors' products.\nWhen your final drive arrives we want you to get back to work fast so we provide all the necessary fittings needed to address any differences in final drive ports. With our competitors, we often find their customers calling us after delivery for help with their fitting issues.\nOur customer service doesn’t stop at the point of sale. We stock replacement parts for every final drive we sell. In the event you do need a part, you won’t be waiting for replacements shipped from other parts of the world. We aim to get you repaired or replaced and back to work fast.\nFinal Drives From Top Manufacturers\n- Airman Final Drives\n- Bobcat Final Drives\n- Case Final Drives\n- Caterpillar Final Drives\n- Daewoo Final Drives\n- Doosan Final Drives\n- Gehl Final Drives\n- Halla Final Drives\n- Hanix Final Drives\n- Hitachi Final Drives\n- Hyundai Final Drives\n- IHI Final Drives\n- JCB Final Drives\n- John Deere Final Drives\n- Kobelco Final Drives\n- Koehring Final Drives\n- Komatsu Final Drives\n- Kubota Final Drives\n- Link-Belt Final Drives\n- Mitsubishi Final Drives\n- Samsung Final Drives\n- Sumitomo Final Drives\n- Takeuchi Final Drives\n- Volvo Final Drives\n- Yanmar Final Drives", "label": "No"}
+{"text": "Category: Maintenance and Repair Instructions\nInstalling the Keypad Side Panel\nRemoving A Stabilizer\nRemoving the Keypad Side Panel\nReplacing the Crank Handle\nReplacing the Torque Plate\nA step-by-step for replacing the crank clutch torque plate.\nReplacing the Cut Motor Brushes\nThis is a quick and easy way to check and/or replace your cut motor brushes.\nShipping Claim Photo Requirements\nIf you have received a package that was damaged due to shipping by UPS. Please follow the steps down below, before submitting your photos to CarveWright. The email you be sending the photos to is: firstname.lastname@example.org Although a physical inspection at a UPS-approved facility (location) is typically required for damage package claims, photo documentation can […]\nReplacing The Clear Cover\nInstructional video on replacing the clear cover of your CarveWright CNC System.\nInstalling The Top Cover (headcover)\nInstructional video on installing the top (head) cover of your CarveWright CNC System.", "label": "No"}
+{"text": "Repair Warranty – All our repairs come with a one year warranty on the part and labor. If the part fails within the year of our repair we replace it absolutely free. No questions asked.\nRepair Reimbursement Warranty – If you had a repair performed by Independent AC and decided that you wanted to have a new air conditioner system installed by us we will credit that repair towards your new ac system up to 6 months.\nNew Air conditioning System Warranties – All complete air conditioning systems installed by us come with a 10 year compressor and parts warranty. Depending on certain models we can offer 5 to 10 years labor warranty. All systems come with a 1 to 2 year labor warranty depending on the model.", "label": "No"}
+{"text": "Can anybody give me the pro's & con's of the single front wheel \"trike\" configuration on the Farmall H? I have not seen very many that way but I am buying one that is.\nAlso, by '47, were most tractors electric starts or were they still manufacturing hand cranks?\nThanks for the help! When I finally get it home, I'll post some pictures.", "label": "No"}
+{"text": "I have an HP ePC and the CD-ROM drive decided to die on it. These particular computers use a notebook CD-ROM drive (Goldstar brand in my case). While I managed to replace it with a Teac CD-ROM from an IBM Thinkpad and a little work with a dremel tool, I was wondering if you had some recommendations for a notebook CD-RW or combo drive for this PC.\nI can use an external drive with it, but it only has USB 1.1 and no internal slots of any kind.\nThanks ahead of time!", "label": "No"}
+{"text": "07-13-2007, 09:24 PM #1\nSet up for new auto drop nozzle ?\nDoes this look right ? I thought I had it right a couple of days ago but Neutral was way off. I now have Neutral set and it is stops at the new attachment in the trim.\nI assume when I trim up the force of the water is what allows it to go up ? Then reverse happens when I trim down.\n07-14-2007, 03:55 PM #2\nUsers Browsing this Thread\nThere are currently 1 users browsing this thread. (0 members and 1 guests)\nBy petroracing.kitins in forum Yamaha ClassifiedsReplies: 1Last Post: 06-15-2012, 05:30 AM\nBy oz_speed in forum 4-Tec PerformanceReplies: 4Last Post: 06-02-2011, 09:52 AM\nBy skigolfnut in forum Polaris Open DiscussionReplies: 0Last Post: 06-08-2010, 08:04 AM\nBy josh217 in forum Yamaha PWC Performance (2-stroke)Replies: 1Last Post: 03-28-2010, 11:55 AM\nBy cmherrera in forum Yamaha ClassifiedsReplies: 10Last Post: 02-10-2009, 09:06 PM", "label": "No"}
+{"text": "Such a great bike trailer! Easy to set up, high quality parts, and runs really smoothly. I dropped my bike on it’s side and the trailer stayed upright! I was looking at $300-500 models, but this was a much better choice. And the real is a gorgeous color! It comes with a flag too! So happy with it!\nIts been hard to find a good value on a trailer lately, this is by far the best one you will find close at all to this price. My only complaint is I think one tire had a slow leak on arrival, but other than that I have ZERO complaints of this product.\nIt’s a good product. Sturdy and smooth. Our smallest (2 yr. old) likes it.\nFirst off, I was very happy with the speed of processing and delivery. So far I am majorly impressed with the quality of this bike trailer. I bought this for the folding capabilities and incredible price, but this bike trailer blows many other way more expensive trailers I have experienced out of the water! Definitely have me confidence in this company and will soberly be ordering more products from them!\nFast shipping easy to put together. Only issue is my 1 year old throws a fit when we are done with the ride he loves it so much.", "label": "No"}
+{"text": "BICYCLE REPAIR MANUAL\nBicycle Repair and Tune-Up - BikeWebSite\nBicycle Repair and Tune-Up, a complete, illustrated, online bicycle repair manual including wheel alignment, handlebar grips and tape, flat tire repair, derailleur and brake adjustment, and much more for mountain bikes, road bikes, BMX, and general bicycles.\nBicycle Repair Manual, 6th Edition: Chris Sidwells\nBicycle Repair Manual, 6th Edition [Chris Sidwells] on Amazon. *FREE* shipping on qualifying offers. In a handy flexibound format, this ultimate visual reference guide for bicycle enthusiasts to maintain and repair their bikes is now in its sixth edition. The latest edition of Bicycle Repair Manual is the most up-to-date photographic manual on the market4/4(11)Price: $10Brand: Chris SidwellsAuthor: Chris Sidwells\nAmazon: bicycle repair manual\nThe Haynes Bicycle Book: The Haynes Repair Manual for Maintaining and Repairing Your Bike (Haynes Automotive Repair Manual Series) by Bob Henderson and John Stevenson. 4.2 out of 5 stars 6. Paperback $27 $ 27. 37. Get it as soon as Wed, Jun 12. FREE Shipping by Amazon. Only 1 left in stock - order soon.\nBicycle Repair & Maintenance Guides - Video Tutorials\nBicycle Repair Guides - Video Tutorials. Click on a bike part or tag to see related DIY video tutorials. Scroll down for the complete list of videos.\nbicycle repair manual | eBay\nFind great deals on eBay for bicycle repair manual. Shop with confidence.\nBicycle Repair Manual - Chris Sidwells | Vehicle Parts\nBIKE. REPAIR MANUAL BIKE REPAIR MANUAL CHRIS SIDWELLS Contents LONDON, NEW YORK, MUNICH, MELBOURNE, DELHI Introduction 7 Project Editor Richard Gilbert Senior Art Editor Kevin Ryan Art Editor Michael Duffy GETTING TO KNOW YOUR BIKE 8. Managing Editor Adèle Hayward5/5(11)\nBicycle Repair, Bike Repair, Bicycle Tune-Up Guide\nBicycle Repair and Tune-Up Guide, a complete, illustrated, online bicycle repair manual including wheel alignment, flat tire repair, derailleur and brake adjustment, and much more for mountain bikes, BMX, and general bicycles.\nBike maintenance books: Seven of the best\nAuthor: Michelle Arthurs-BrennanBicycle Repair, Rob Van Der Plas. We review Bicycle Repair by Rob Van Der Plas. Score.The Ultimate Guide to Bike Maintenance and Upgrades, Guy Andrews & Stuart Clapp. We review Park Tool Big Blue Book of Bicycle Repair, C Calvin Jones. We review 'Park Tool Big Blue Book of Bike Repair Manual, Chris Sidwells. We review the 'Bike Repair Manual' by Chris Sidwells. Score.See all full list on cyclingweekly\nTrek Bike Owners Manuals and Bontrager Product Manuals\nDomane SLR service manual Domane disc supplement - english ( 620 kb) 2013 Trek Madone 7 series brake manual - english ( 626 kb) 2014 Trek speed Concept service manual - english (â 6.5 mb) Bicycle rack manuals. Bicycle rack manual ( 780k) Spring clip installation 520 Front rack manual - PDF\nE-BIKE 36V SERVICE MANUAL Pdf Download.\nView and Download E-Bike 36V service manual online. Bicycle. 36V Bicycle pdf manual download.\nRelated searches for bicycle repair manual\nbicycle repair manual free pdfbicycle repair manual onlinebest bicycle repair manualfree bicycle service manualsbicycle repair instruction manualsroad bike repair manualpark bicycle repair manualbicycle repair manuals pdf", "label": "No"}
+{"text": "Age Recommendation - These bikes will suit riders from about 4 years old up to about 7 years old.\nBrakes - All 16\" bikes come with a rear pedal brake plus one hand brake fitted to either front or rear. The reason for the handbrake is as an alternative to the pedal brake in case the chain comes off. Its also good practice for children before they start riding a bigger bike which may have only handbrakes.\nHandlebar Clamps - 4-bolt handlebar clamps are the same as on the bigger BMX bikes, and necessary for particularly rough young riders. Single bolt clamps on some cheaper bikes are OK for most riders though.\nNumber of Spokes - The better 16\" bikes will have 28 spokes per wheel rather than as few as 16 on some. More spokes will mean a stronger and more durable wheel, but the difference is not critical for most riders, it's more important how tight the spokes are - on any bike a wheels strength and durability are largely determined by the correct tensioning of the spokes.\nHandlebar bags and baskets - Popular with young girls, they can carry a sandwich, a drink or a teddy bear companion.\nDoll seats - Dolls and bears can travel in style in these, held safely in place with a seat belt. However, they're not very strong, so don't expect them to last as long as the bike.\nTyre Size - Tyres will usually be either 1.75\" wide or 2.125\" wide. The 2.125\" is a wider tyre, more suited to riding on poor surfaces, and more durable if the bike is ridden a lot. We won't mention skidding of course.\nPedal Bearings - Many small bikes come without ball bearings in the pedals (the plastic pedal body runs directly on the steel axle). This in not a great problem, but pedals will last longer and work better if they have proper ball bearings.\nReinforced Trainer Wheels - 16\" bikes come standard with trainer wheels. These can vary significantly in strength, but none are designed to be used long term. Try to get your child riding without them as soon as possible. Many trainer wheel arms are reinforced, but if the extra layer of steel only braces the angle and does not go under the axle nut, it will be ineffective. (They'll always try to bend under the nut first as that's where leverage is greatest.)\nYou don't need Trainer Wheels? - Good! No one can ride properly until they're taken off the bike anyway. We'll keep the trainer wheels from the bike and fit a quality steel kickstand instead, at no extra charge.\nServiceable Bearings - All bikes we sell have adjustable and replaceable bearings, but you might come across cheap bikes elsewhere which don't. Avoid them, as these bikes are not serviceable and will last only a short time.", "label": "No"}
+{"text": "The HP Velotechnik Scorpion fs26 has one of the smoothest rides of all Trikes. It features both front and rear suspension that is adjustable to body weight. In addition, it has multiple seat choices to best fit your body size. Add to that the premium Aluminum frame and Sram drivetrain, including the Sturmey Arhcer CS-RK3 rear hub with its internal 3 speed drive in combination with an 8 speed external drive, and the trike is well worth the price. In addition, it even folds!\n*Picture does't depict exact features.\nFor more specs on this recumbent trike click HERE", "label": "No"}
+{"text": "Ha that same picture was used 'round my parts when there was an earthquake. Yes there are apparently earthquakes in Wisconsin.WHEEE!!\nPrelimary 4.9 earthquake NW of me at 4:02PM. Waiting to hear the official numbers. Epicenter probably about 20 from me!\n[edt]  Close....23 miles from me....", "label": "No"}
+{"text": "I replaced a battery in HP Presario 1500. For some reason the computer does not see the battery. If I start computer on power supply, than remove adapter, computer will stay on and use the battery power, but if I want to start computer using battery power only, it will not turn on.\nWhen I charged the battery it would charge to let say 15% and stop charging, I had to remove and reinsert it to start charging again.\nI got it to 100% charge this way. That's what battery monitor indicate.\nWhen I was at about 30%, I turned on monitor, removed AC adapter and checked a discharge time on battery monitor, let it discharge and time to do that corresponded with what monitor was showing, so that part is OK.\nI checked HP site, but no luck. Any idea what could be wrong?", "label": "No"}
+{"text": "Fender Mustang Wiring Diagram\nFender Mustang Humbucker Wiring Diagram For Roc Grp Org Throughout\nOn this website we recommend many images about Fender Mustang Wiring Diagram that we have collected from various sites from many image inspiration, and of course what we recommend is the most excellent of image for wiring diagram for fender mustang . If you like the image on our website, please do not hesitate to visit again and get inspiration from all the houses in the image of our web image.\nAnd if you want to see more images, we recommend the gallery below. You can see the picture as a reference image from your Fender Mustang Wiring Diagram.\nThank you for seeing gallery of Fender Mustang Wiring Diagram, we would be very happy if you come back.\nfender mustang wiring diagram depilacija me incredible shortscale view topic i designed a new mustang wiring diagram also fender 2iqxqwg fender mustang wiring org stuning diagram fender mustang humbucker wiring diagram for roc grp org throughout fender mustang wiring diagram depilacija me beautiful fender telecaster wiring diagram best of mustang pleasing fender mustang wiring diagram britishpanto pleasing fender mustang humbucker wiring diagram mods throughout jaguar bass arresting wiring diagram for fender mustang powerking co brilliant britishpanto extraordinary cobain mustang and jagstang wiring diagrams fmic official fender best diagram", "label": "No"}
+{"text": "Sump Pumps Run Until They Stop.\nIf any of these conditions occur, please contact PDM to keep you safe and dry.\n- Is the sump pump rusty\n- Age: Six years old or older replace and use old pump as a back up sump pump\n- Sump pump makes strange noises\n- Sump pump vibrates a lot while running\n- Sump pump hasn’t run since the last rain\n- Gets stuck sometimes\n- Sump runs constantly\n- Builder sump pump (known to be the cheapest pumps on the market)\nCall PDM Plumbing since 1885 for trusted sump pump maintenance, repair and replacement before the next heavy rain. If not a sealed pump PDM can test to learn about its life. Call 815-207-4111 or order online.", "label": "No"}
+{"text": "FOR SALE 2 female Old English Bulldog/Pit Bull puppies 8 weeks old $100 Call Tim at 641-218-4326\nFiled under: ClassifiedsKeywords: For Sale, Puppies\nFor the first time in history, a self-driving vehicle shipped commercial cargo from one city to another. Is truck driving a dying occupation?\ncall: (641) 842-3161 | (641) 628-8672", "label": "No"}
+{"text": "Samsung Galaxy A10 berlayar HD+ Infinity-V 6.2″ dengan chipset Exynos 7884, kamera depan 5MP, kamera belakang 13MP, baterai berkapasitas 3400 mAh. Mitsubishi Motors has additionally raised the bar inside the all-new Lancer EX. While you sit on the Lancer EX GT-A?s sport kind seats, you’ll first discover three-spoke leather-based wrapped steering wheel with integrated audio controls and magnesium alloy paddle shifters much like the Outlander. The dashboard is complemented with a carbon-look accent strip, which stretches backward and forward. All of the controls, dials of the auto-climate system, and buttons have been simplified and properly situated providing an uncluttered private house. Beyond the steering wheel, two sporty analog gauges flank the multi-data display monitor that displays the odometer, journey meters, exterior temperature, engine coolant temperature, fuel degree, average gasoline financial system, kilometer vary, maintenance reminder, and a thoughtful relaxation reminder.\nLenovo has announced can be release the subsequent generations of ThinkPad T410, that known as Lenovo ThinkPad T420s and Lenovo ThinkPad T420. All it’s important to do is decide up a used automobile listing to see that brand new cars lose anyplace from 30 to 40 percent of their unique value in as little as two years. That?s a fairly steep quantity. Right here?s another quantity, sixty five percent ? this is the quantity you save if you happen to buy a used automotive that’s five years previous as a substitute of a brand new one.\nThe Advantages Of A Used Automotive Guarantee\nSelain itu chip buatan Samsung ini juga mengunduh 2x lebih cepat dibandingkan chip Snapdragon 450.", "label": "No"}
+{"text": "[QUOTE=TreasureHunter;11957198...New to me.. with 1,000' on it.. lol\nCan't wait to take her out tomorrow for my first ride...[/QUOTE]\nCongratulations, I'm sure you'll enjoy it.\nRoad Bike: 2004 ORBEA Mitis2+Carbon, Freekin' groovy Urban / Mountain Road Cruising Bike: 2007 CANNONDALE Bad Boy Disc, MTB: 2012 Trek Gary Fisher Collection Marlin WSD 29er\nI just got my new 2010 Windsor Stratford bike from Bikesdirect.com, this is what it looks like:\nright now it is at the bike shop near my house, the bike shop should have it all complete and ready to go by thursday, i cant wait to ride it. also my LBS\ncharged me less than 50$ to have it built.\nHappy Holidays, and ride safe.\nI bike every day for fun.\nSixtyfiver ... that looks way better than any so called twentyniner.\nHave you a specific reason to put the wider tyre in front? To have better cornering in the snow?\nIt is a fairly fast winter set up that can handle anything but really icy conditions and the handling is rather excellent.\nThe 38 also has an inverse tread that sheds snow and dirt better than than the front... these types of tyres are good for everything but black ice...t he Conti town and country uses this although my tyres are some NOS Avocet cross tyres.\nWas going to fit a pair of 45's but thought I would try a set up that was like my mtb which runs a narrower rear tyre and just rocks on the trails and winter riding is just like that and sometimes even more challenging.\nWas amazed at how well the bike blew through the churned up snow and half buried ruts in intersections which is about as hazardous as it gets (save for black ice) and I was flying on the hard pack and cleared roads.\nThose Avocet inverted tread tires were some of the best all purpose tires I'd ever come across and you are damned lucky to get some NOS. They, as I'm sure you know, made in both 700s (28-38?) and 26\". I sure wish someone could make a good copy of those.\n\"change is the only constant\"\nhere is a pic of me and my road hybrid bike: 2010 Windsor Stratford bike from Bikes-direct.com . i took it for a 22.8 mile bike ride yesterday, it was quick as a whip, i got up to 27.3mph in a matter of seconds. the seat isn't very comfortable, and i need to adjust the flat bars alittle, it turns very well, also the tires are 700x25c. i noticed a big difference in weight and rolling resistance compared with my raliegh misceo 1.0 hybrid bike. i hope you enjoy.\nI bike every day for fun.\nPic with the Avocet Cross installed... there was nothing wrong with the CX Compes I was running (they are awesome) and I just wanted to try a wider front tyre and the bike was actually designed to handle some pretty wide rubber.\nCross-posting because, hey, I can, and I'm proud of myself here. Photo below of my '11 Sirrus Elite, with minor add-ons.\nBut I'm proud because I noticed finishing a ride Friday that my back wheel had some \"play\" in it, as in if I held the bike and pushed on the edge of the rim I could feel it \"wiggling\" and \"knocking\". The shop was, of course, closed early Friday and all day Christmas, and I've planned a Christmas ride with my wife. So I get to reading and watching videos online, and after a couple of hours of slow tinkering and learning, I diagnose a loose hub and find the lock nut on the non-drive side of the hub wasn't as tight as it needed to be. Another bit of slow tinkering and adjusting, and the wheel is solid and true again, spinning freely and no lateral wiggle. I'm pretty handy mechanically, but this is the most I've done on a bike before, so I'm feeling pretty good. The adjustment is definitely finicky to figure out with how the quick release skewer affects it, but slow and steady won the race. I'm sure some of you experienced riders are laughing at my noobishness, but I'm feeling good about it right now personally.\nSo yeah, here's the picture.\nLast edited by pbd; 12-25-10 at 06:17 AM.\nyou really need a couple 'cone wrenches' to adjust hubs. these are thin metric wrenches that fit into the slot on the cones, so you can adjust them then hold them put while you tighten the lock nut with a regular wrench. if its properly tight, the quick release skewer will have no affect on bearing play.\nHere's what I was reading, from: http://www.sheldonbrown.com/cone-adjustment.html\nAnd as far as the actual wrenching, it turns out I did have a wrench that fit onto the cone. It was a fluke though, it came with the assembly kit for a couch, really weird. A better one is in order for comfort, but this one worked surprisingly well.Quick-release hubs are trickier to adjust, because the quick-release mechanism compresses the axle slightly when it is tightened. If you adjust the cones so that they feel just right off the bike, they will bind up when you tighten the quick release. You must set the cones so that there is a little bit of play when the hub is off the bike, or when the wheel is installed with the quick-release just barely tightened.\nEither way, thanks for posting, and Merry Christmas!\nLast edited by pbd; 12-25-10 at 06:49 AM.\nhey, where i am at the temps were 83 when i last checked. love it!!!\n\"...there is a 50/50 chance that something can go wrong....and 9 times out of 10, it will...\"\nThere are a few ways to achieve this, some will out a wheel in an axle vise and set the cones to 0 play and back it off a few degrees, I use the frame so that I can set the bearings and check them while they under compression.\nYou can also make or buy a jig to do this.\nsnow 006.jpg Snow pics, just washed it. After a day of riding off road. At one point the back\nwheel was locked up with ice...I was not a big fan of Trek, but this bike is awesome ! With those tires\nshe rolls down the road fast, 34 Mega gear for climbing, mud, snow and road, all in one bike ! And it is\nat the low end price range...I love it more with every ride, and it is running 26\" wheels..Richard\n2011 Trek FX 7.3 in white. Loved the white on the 7.7 that I had so I got the 7.3 in the same color. It's bare as hell right now... scowering bforums right now to see what i can do to it\n2011 Trek FX 7.3 (White) -- Wife's ride ....... 2015 Trek FX 7.4 (Gray) -- My new ride ....... Lotus Classique - My Sunday ride\nSnow Courtney and Me Bikes 006.jpgGiant 008.jpg\nThe Trek is going to be my back up bike now, the Schwinn was really my go to bike, but with all the mud and snow,\nplus the only way I have found to keep my feet warm is. To wear water proof boots with wickering socks, then\ndepending on how cold it is, which size wool over them, have been out for half a day in sub 30 degrees and no\nmore cold feet, but with the boots, they do not fit my strap peddles on the Schwinn. And I really like the wider\ntires anyway. Richard : )\nWhen I posted this, did not realize I was getting the Giant, both MTB's really. I just ride them like Hybrids, the Giant fits\nme a little better, and has much better components. ( But the Trek is still awesome ). I took the tires off the Trek,\nBontrager Connections, and the rack, still going to keep it for back up though. I put Kendra Kwicks on the Trek, and\nwill probably still ride the Schwinn on road rides only, I'm selling the F4, really no need for it, and it is to small for me.\nI really am surprised by how well the TEKTRO disk work, compared to Avid Juicy 5's, and that Cygolite is so bright, 50\nhours on low, 4.5 on high, but on high it lights up the road like the car. ( NO KIDDING ), would not make a good\ntouring light though, have to recharge battery pack, most of my riding has been at night for the last month. BUURRR,\nit has been cold. And don't forget 1 mile of ever ride I do is on a rough gravel, sometimes muddy road, need MTB gearing\nto go up it 1/2 mile, and then the down hill is pretty rough for a driveway. The 700 x 38c seemed small to me, and some\nof you guys run 23c, I would be pushing for one mile every ride. And this year I want to get a little more aggressive at\nMountain Biking, so I thought the 100mm travel would be better. And with those Bontrager Connections, you would be surprised\nat how fast it will roll down the road. I can not tell very much difference between the 38c, My son still loves his Flat Bar Road Bike,\n( LOL ), and is faster than me now. He rides at over 20 MPH most of the time, and I am in between 8 and 20 MPH, EXCEPT on\nhills, hitting close to 40 all the time, going down of course. ( Just a bike update )... Richard\nThis is kind of a geeky picture, but it's my first with my Jamis Coda Sport.\nIt was 60 degrees today in SW Pennsylvania and I went for my first OUTSIDE RIDE today since my test ride! Man, riding outside is a bazillion times better than the trainer!", "label": "No"}
+{"text": "Have you ever purchased from PartSelect.com before?\nThank you for helping make our site better.\nPartSelect Number PS11738877\nThis washing machine injector hose runs from your washer's inlet to its injector. It is black and made of rubber. It is also available in an injector kit.\nThis part works with the following brands: Whirlpool, Admiral, Estate, Inglis, Kenmore, KitchenAid, Roper, Maytag, Crosley, Jenn-Air, Hardwick, Magic Chef, Amana, Caloric & Glenwood.\nThis part fixes the following symptoms:\nRemoved front of machine; then tilted back the top of machine, after removing the two screws in top front. Removed the old parts, trimmed the injector hose which was slightly longer than necessary, put new injector nozzle in ruber injector valve and inserted into the new sleeve, clamping the new hose to sleeve as well as clamping the remaining functioning hose to sleeve. The new sleeve mounting bracket was slightly different from the old one, but I was able to make it work with a small block of wood and two screws. The washing macine no longer leaks, the parts arrived timely, and the price was right. Thanks.\nHelp other customers find the most helpful instructions.\nWere these instructions helpful?\nThis clothes washer is 35 years old and runs like a champ. I did notice a bit of water below the left rear and assumed that a hose was leaking. I let it go for about 6 months, until I could fit it into the \"to-do\" list. During that time, the hot/cold water intake valve died. I ordered the replacement hot/cold valve a month ago but noticed, upon removal of the valve, that there was significant water drip evidence around the electrical valve solenoids. The water drips caused the valve to die. Drips came from a clogged injector hose air break directly above the valve. Replaced all hoses and water level vacuum air line. Very easy process. The front drops off with two screws. The lid is off with two screws. All hoses easy to R/R. It took about 2 hours to complete. All replacement parts were perfect. My belts are fine so I'm ready for another 30 years of service.\nRemoved front cover by removal of 2 phillips screws at bottom of front panel. Removed two cap screws from lf and rf corners attaching the top to the side panels. Raised and blocked up with piece of wood the hinged top of machine. Removed hose clamps with nut driver and cotter pin remover to expand the maytag clamps for reuse and to break the stick of the hoses to the old sleeve. Removed the clamp at the water fill valve on the water hose run up to the sleeve. Removed the water injector from the washer fill hose and removed the plastic injector for reuse in the injector hose. Inserted it into the fill hose as the old removed sample revealed. Installed the new improved plastic sleeve with one of two original screws, no longer using two but one screw for mounting. Installed original clamps on new hoses and reinstalled hoses on new sleeve. Pressed run dial center to start fill to ensure water leak was now cured. Reinstalled lf and rf cap screws to side panels. Reinstalled front panel 2 phillips retaining screws. Tested cycles and no leaks, on this 1966 machine bought new in may of 1966, along with its companion maytag dryer. Both remain in good use. A comparable maytag washer is 799. 00 At lowes. . . Thank you, fred maytag, for the best washer with the easiest design to repair, if it ever needs parts. . . And thanks, partselect. Com for having these 44 year old washing machine parts. Interesting to note that this sleeve not only had an added water fence around its open vent slots to prevent water overflow, but that it now tilted rearward on the oem mount to aid in that desire. It is always good to see american companies that are continually upgrading their parts to work better and to fit in older machines, like maytag has always done, in their search for excellence.\nRemove front panel of machine, 2 screws at bottom. Remove 2 bolts at top front with nut driver and whole top can be lifted to expose all parts. Remove injector hose clamps and clamp new hoses in place. I replaced both injejctor hoses while open although only one had small hole in it. This is the only repair done on this coin-op machine in 20 years. At this time I did replace both drive belts but they could have run for more years, no cracks or breaks in belts. This machine is in a 12 unit apartment building. We have two on them, same age. We purchased both coin ops newin 1987.\nunplug machine ,shut off water supply,Removed 2 lower front panel screws ,raise panel upward \"hinge type motion\"and removed , Remove 2 self tapping screws from under front corners, removed liquid bleach tube from upper connector ,raise top toward back of machine , place prop \"piece of wood\" to hold top up,removed 1 screw attaching injector ,now replaced injector assy and install with new hoses and clamps. then assemble in reverse order\nReplace the injector hose\nBy removing the front panel and raising the top panel, I was able to observe that water was overflowing from a small plastic \"cup\" that was positioned midway along the inlet lines for water entering the washer tub. None of the adjacent parts were visibly damaged or broken, but the rubber ones were soft and \"gummy\" to some degree. I ordered the three parts that I was able to identify, based on the photos at PartSelect.com. They arrived ahead of schedule and I was able to install them the same day. The only additional disassembly involved disconnecting the hot and cold water lines, removing the water inlet shield and gaining access to the upstream end of the old rubber hose in order to replace it with the new one.\nRemove fron cover raised lid slightly and moved it slightly to the right exposing injector and hoses. replace one hose and installed new injector and clamps. Problem solved.But what needs to be said is that the PARTS SELECT Website made it easily to identify the parts needed, fair pricing, way lower than local Maytag dealer, and exceptional speedy delivery (basic delivery option).\nAssembled the parts, put them into the machine, moved it back into place, started it up and it is running fine. Thanks for the good service, good parts and they arrived on time.\nAll brand logos are trademarks of their respective owners.\nThe PartSelect logo is a Registered Trademark of Atlantic Laundry Centres, Ltd.\nCopyright © 1999-2017 , Eldis Group Partnership. All rights reserved.", "label": "No"}
+{"text": "There are not currently any yard sales posted in gibbon, mn this week.\nBut there have been 7 yard sales, garage sales, estate sales, and tag sales posted in gibbon, mn since we started!\nSo check back frequently.\nAlso, bookmark (type \"CTRL + D\") this page, or share it:\nYou are not the only person looking for yard sales in gibbon, Minnesota.\nHere's what other people have been searching for:\ncity wide garage sales hutchinson mn 2013 - gibbon garage sales octover - craigslist garage sales city wide minnesota - gibbon mn city wide garage sales - city garage salesin gibbon mn - garage sales mn - desk for sale glencoe mn - gibbon mn 2011 garage sakes - garage sales in gibbon - truman citywide garage sales - garage sales in new ulm minnesota - dates for garage sales gibbonmn - not provided - glencoe mn garage sales - mankato mn city wide garage sales -", "label": "No"}
+{"text": "TAC participated in Shanghai cippe China International Petrochemical Technology and Equipment Exhibition\nOn August 23, 2023, the 23rd China International Petrochemical Technology and Equipment Exhibition of cippe concluded successfully in Shanghai.\nPaitai Industrial actively participated in this exhibition with a full range of electric torque wrenches, hydraulic torque wrenches, pneumatic torque wrenches, electric servo wrenches, intelligent torque sleeves and other products. Countless people in the industry came to visit and consult, and provided various electric, lithium battery, pneumatic, hydraulic, intelligent control and other bolt tightening solutions to customers in the petrochemical industry;\nThrough this exhibition, Shanghai TAC has made new friends in the petrochemical industry. We will continue to increase innovation, ensure high-quality services, and maintain close contact and cooperation with our customers and friends.", "label": "No"}
+{"text": "Oh yeah! You feel it? I know you do... and for that very reason it gives me great pleasure to present to you the completed Night Monkey project...\nHere's what it's outfitted with:\n_Frame: Surly Karate Monkey\n_ Wheels: Salsa Delgado rims, Front hub: Shimano 600 32H, Rear hub: Shimano Nexus 7-speed internal with drum brake 36H. Built up using DT Competition 2.0 to 1.8 spokes, Tires: WTB Nano Raptors\n_ Crank: Race Face Dues XC 175mm with a Rocket 32T chain ring, Crank Brothers Mallet pedals\n_ Seat/Seatpost: Honey Brown Brooks B17, Thomson Elite 400mm 27.2\n_ Stem/Handlebar: Thomson Elite, 25.4 mustache bar, Salsa bar tape\nNow a top view... Can you tell anything that might be problematic with the set-up I'm running?\nI'm running a teflon coated cable but am only really concerned with the sharp turn right as it hooks up with the hub... But so far it shifts fine with this cable routing...There are two things that might end up changing as I get some ride time on the bike. One of them might be the front brake to a canti or switch out the brake levers to something that has a bit more 'spring' in it. I'm also considering playing around with a true barend shifter and running it friction and seeing how it goes.\nBut for now, it's time to put some miles on this beast!", "label": "No"}
+{"text": "€ 6 999\nFor Sale or Trade: ULM Micro Aviation Pulsar Bi-place Side-by-Side Airplane, in good flying condition and available immediately.\nPossible Trades: Multi-axis ULM / Automatic 4x4 vehicle / Excavator-Backhoe? Open to proposals.\nThis airplane has been fully renovated 100 flight hours ago. New tire landing gear.\nOffers excellent visibility, similar to a helicopter.\nBi-place side-by-side seating configuration.\nPowered by a Bombardier-RotaX 582 engine, featuring dual ignition and dual carburetors, delivering 65 horsepower in excellent condition.\nEquipped with a 3-blade Arplast propeller in very good condition.\nNew gel start battery.\nHigh wing design that folds in under 10 minutes, allowing for easy storage. Complete dual controls for propulsion.\nSérénac, Tarn, France", "label": "No"}
+{"text": "residential well pump 1 2 hp shallow well jet tank system with tank residential sewer pump station design residential grinder pump station.\nwell pump switch adjustment submersible well pump how to adjust a pressure switch water adjustment adjusting pumps shellback pump switch adjustment jet pump pressure switch settings.\npickup wheel well tool box storage bed truck bed wheel well storage boxes truck bed pickup truck 5th wheel tool boxes pickup bed wheel well tool box.\nwell water filter cartridge carbon impregnated non cellulose pleated mi fresh water systems pur water filter cartridge walmart ge appliances rpwfe water filter cartridge.\nthompson water seal garden sprayer water seal deck lawn garden sprayer gallons.\nsolar water well pump kits use solar pump kit irrigation dc submersible solar water deep bore well pump solar water pump kit for fountain solar water pump kit uk.", "label": "No"}
+{"text": "Winter is considered as the hardest time to ride, in the northern hemisphere at least, but it can also be extremely rewarding. Those cold mornings when the roads are frosty and the sun is barely breaking the skyline, can be some of the most exhilarating and rewarding. Below is comprehensive guide to keeping those wheels turning throughout the winter months.\nThe Alloy Alternative: Although many choose to stay on their beloved technology laden carbon hoops, it may not be the best policy for the winter months. Poor conditions will mean a degradation of performance and any advantage you once had, will quickly evaporate as the grit and grime of filthy roads starts to increase. It is the time of year many cyclists swap out their carbon hoops for a set of weather hardy alloys.\nAn alloy wheelset will not only ensure you keep chalking up the miles throughout the off-season, they will also see you in good stead when the intermittent conditions of a UK summer take hold. However, much like their carbon counterparts, any wheelset will benefit immensely from a bit of love and attention therefore the following advice can be used for both sets.\nDebris Free Brake Pads: The best way to prevent rim wear is to frequently check your brake pads for road debris, grit has a tendency to get embedded in the soft rubber and once the pads become contaminated, they act like sandpaper, scoring and wearing the rims every time you brake. Once a month or after several wet rides, inspect the pads and remove any embedded debris, at this point it’s also a good idea to check and replace overly worn pads before they glaze or harden, which will also increase wear to the rims.\nKeep The Rim Track Clean: Keeping the braking track in pristine condition will increase the longevity of your wheels, it is therefore worth paying close attention to them. Regular cleaning of not just the wheels but also the brake pads is every bit as important as cleaning the mechanical components. Use a general bike cleaner or alternatively, hot soapy water and ensure you removed as much of the dirt and grime as possible. Isopropyl alcohol or a degreaser are also options and will clean the rims more thoroughly.\nWhen to Change Pads: Regardless if you are running disc or rim, partially worn pads will disintegrate much faster in wet conditions. In both cases, once the pads wear down, they will need replacing. Rim brake pads have wear indicators, grooves cut into the rubber that let you know when the pads need replaced, using them below this indicator can cause damage to the braking surface of the rim.\nIf you are running a disc brake set-up, you will need to remove the wheel before checking the pad. We would advise removing the pad from the calliper, this will allow you to see just how worn they are. Disc brake pads generally have 3-4mm of compound, once that compound had worn to 1mm or less, they need to be replaced. Extreme wear will cause metal to metal contact and will significantly reduce braking performance and could cause unnecessary danger.\nRim Wear Indicator: Ever notice a small indentation on your alloy rim brake wheels? This is the rim wear indicator (usually at the valve hole) and once this disappears through wear, you will need to replace the rim.\nBrass or alloy, which should you choose? This is a common question we get asked on a regular basis but regardless of what you decide to go for, both will benefit from regular maintenance, especially over the winter months. Brass nipples are much more durable and will not corrode like an alloy nipple when the salt goes down, but they are heavier than their alloy counterparts and only available in two colours.\nNipple Lubrication: If you are running alloy, to help prevent corrosion a simple application of lube will help keep your nipples tip top. To lube the nipples, touch a drop of light viscosity oil to the spoke as it enters the nipple, give it a few seconds to filter between the two before adding a second drop at the nipple-rim contact point. One you have completed the process with each nipple, spin the wheel to distribute the lube evenly.\nWinter Specific Tyres: During winter, the tyres ability to cope with differing conditions intensifies. A single ride can encompass different elements, water, ice or even snow, all of which effects grip and performance. Winter riding can be a significantly different experience to summer, dealing with grit that's washed onto the road, grim and perpetually changing conditions. There is also the ever-increasing chance of punctures, so if you want to get the most out of your winter riding, an all-weather appropriate tyre should be top of your list.\nLow Pressure Improves Grip: Another way to increase grip is to lower tyre pressure. Lowering the pressure will improve grip and comfort and might just stop an unwanted and dangerous fishtail. Unfortunately, a drop in pressure won't help much with puncture protection, but it most certainly should improve your overall winter riding experience. The most effective way to lower tyre pressure is utilizing a tubeless set-up.\nThe Benefits of Tubeless: Tubeless technology has been around for quite some time in MTB and although it's still going through the acceptance phase for road riding, tubeless technology will help reduce the amount of flats you'll get over the cold winter months. We've all been there. Once thing we would add here is to make sure you use the best tubeless fluid you can afford! The more expensive fluids have more fibres which help block any holes and it really is a case of 'you get what you pay for', so the money will be well spent.\nKnow How to Quickly Remove / Fit a Tyre: There's nothing worse than hearing the words 'flat!' when on a cold, wet weekend ride but if this is you, you'll want to rip that tyre off quickly, stick the tube in, and get moving again as quickly as possible. Check out the Scribe YouTube channel for more information on tyre fitment.\nOur Full Alloy Range\nBrowse all of our alloy collections together and compare side-by-side, we’ve got you covered for all your winter and summer riding needs.", "label": "No"}
+{"text": "My '92 Bridgestone RB-1 is posted somewhere way back in this thread. The latest addition to the herd is a Salsa Casseroll set up for commuting and long distance riding, possibly some light touring.. I started with a single speed complete bike because I like the color and I could use some of the parts that came on the bike for the build I planned using a few new parts and a few that I already had. I changed the single ring crank to a Sugino XD with 26-36-48 rings. New wheels are Mavic CXP-33 rims with Ultegra hubs with 28mm Panaracer Pasela TG tires. I went with an 8 speed cassette (12-25) and Suntour friction bar end shifters. Brooks B17 saddle. Baggins bags. Planet Bike fenders. Ritchey Pro stem (original was too long).", "label": "No"}
+{"text": "Separate names with a comma.\nDiscussion in 'Archived Threads 2001-2004' started by Chuck C, Mar 16, 2002.\nDid Onkyo put the DTS-ES and DPL II logos on updated 989s?\nwhen i upgraded mine they(the sticker logo) came with the CD-ROM and i put them on,so i would guess they would do it at the factory,just make sure yours is a later model like Fall/2001 and the upgrade should already be on the 989.\nI bought a factory upgraded unit. I had to put the stickers on myself.", "label": "No"}
+{"text": "Steering Wheel dream of a steering wheel represents the ability to control the direction you are headed in life. Whoever sits at the wheel represents an aspect of your personality that is guiding your decisions.\nTo dream of the steering wheel braking off represents feelings of being at the mercy of fate. Feeling forced to wait for a situation or end or go badly in order to be able to change your situation. A decreased ability to direct a waking life situation.\nTo dream of the steering wheel being on the passenger side of the car may reflect your passive control of a situation. Advice, guidance, or suggestions that are steering the direction of a situation. It may also reflect how unusual or lucky it feels to have control when you usually don’t.\nRead More :", "label": "No"}
+{"text": "This content is not included in your SAE MOBILUS subscription, or you are not logged in.\nSuccessful Performance Development Program for the T800-LHT-800 Turboshaft Engine\nISSN: 0148-7191, e-ISSN: 2688-3627\nPublished April 01, 1989 by SAE International in United States\nAnnotation ability available\nThe T800-LHT-800 engine has recently completed a successful preliminary flight rating (PFR) development program that led to its selection for go-ahead to final qualification by the Army during a competitive runoff. The T800-LHT-800 is a modern technology 900 kw (1200 HP) class turhoshaft engine intended for application in the Army's advanced rotorcraft LHX vehicle with numerous potential applications to commercial and foreign military installations. At greater than 4:1 power-to-weight ratio, its specific fuel consumption represents a 10 to 30% improvement over current production engines with major steps forward in maintainability, reliability, and sup-portability. The engine is being developed for initial fielding in 1992 by the Light Helicopter Turbine Engine Company, a joint venture partnership of Allison Gas Turbine Division of General Motors Corporation and The Garrett Engine Division of the Allied Signal Aerospace Company.\nDuring the PFR phase that ended in September, 1988, significant effort was expended on engine performance development. This program began with a first engine to test that deviated from required part power specific fuel consumption levels by approximately 6.0%. Assets were then methodically applied to diagnose precise areas of deficiency and to develop necessary improvements. From this work, production viable configuration changes were developed which improved the performance beyond specification requirements and provided a significant level of production margin. This program was conducted in a 1.5 year span-within the proper time frame for the start of the final qualification test phase of the program. The lessons learned from this program provide valuable insights into the typical areas where performance deficiencies are most likely to surface in high-technology small engines with aggressive performance goals.\n|Further Development of the JT15D Turbofan\n|Design Considerations for Enclosed Turbofan/Turbojet Engine Test Cells\n|Minimizing Heat Rejection in Aircraft Accessory Drive Gearboxes", "label": "No"}
+{"text": "Metso announces Juha Silvennoinen as president of Services business line in Mining and Construction\nMetso Corporation has announced it has appointed Juha Silvennoinen to president of Services business line in Mining and Construction, effective March 26.\nJuha most recently worked for ABB, where he was responsible for the Motors and Generators business unit.\nIn addition to his responsibilities as president of Services business line in Mining and Construction, he will also be responsible for the development of the company’s overall services business, strengthening synergies and finding business opportunities within the services businesses.\nHe will also participate in Metso Executive Team meetings.\nFrom our partners\nThe new Sandvik Ranger surface drill rig offers renowned drilling efficiency with up to 20% lower fuel consumption\nKnown to many by their former name, Ranger, Sandvik’s DX series surface…", "label": "No"}
+{"text": "COMPATIBLE INTEGRATED DESIGN (CID), 4D DRILLING,\nAND TCS JOIN WTB’S MARKET LEADING RIM TECHNOLOGIES\nFOR COST-EFFECTIVE TUBELESS PERFORMANCE\nWTB is attacking the wheelbuilder market with its new FREQUENCY rim designs. FREQUENCY rims introduce new market-leading technologies that allow wheel builders and consumers to build reasonably priced high-performance tubeless wheels in 26″ and 29″ and to replace their current non-tubeless rims with Tubeless Compatible System (TCS) hoops.\nTCS technology is the solution for riders seeking high performance, lightweight and durable mountain bike wheel systems that are easy to build and simple to service. TCS rims are:\nWTB‘s “Bead Lock” ensures that the tire stays locked onto the rim even in the most rugged riding conditions. TCS tire sealant, rim tape and removable core valve complete the lightweight system.\nSimple. With ultimate control over the rim and tire fit, TCS products ensure the installation process is simple. With the use of a floor pump, no special tools are required making the process as easier to install than a tire with an inner tube.\nFun. TCS technology enables the end user to maximize the ride experience on the trail. Improved wheel stiffness and reduced weight improves suspension performance. Reduced tire pressure improves traction and control.\nFREQUENCY TCS RIMS FEATURES INCLUDE:\nCID – Compatible Integrated Design is a WTB design philosophy that allows ANY bicycle wheel builder, dealer or qualified mechanic to be able to build and service the components of a Frequency equipped wheel set without the need for special tools or techniques. Simple, reliable wheel building!\nTCS – Frequency rims allow riders to build or convert their current wheelsets to TCS. Performance features include the ON-RAMP inner profile, and the BEAD LOCK UST shape and diameter for superior tire fit and retention, TCS RIM TAPE for a consistent air-tight seal, and TCS Sealant for superior flat protection.\n4D DRILLING – Directional drilling on FREQUENCY rims provides stress-free, straight to the source angling for spokes towards the hub. Normal spoke drilling patterns put undo stress to the spoke and rim at the nipple. 4D eliminates this, resulting in a stronger, lighter wheel build.\nUNBENDIUM BULGE – Additional material is added to the outer sidewall, improving torsional, radial and lateral strength.\nFounded in 1982, WTB has been defining State-of-the-Art cycling products since its inception. With a profound focus on wheel, tire, rim, saddle, grip and accessory technology, this rider-owned and staffed company builds superior products through constant real-world testing and a ground-breaking passion for mountain biking.\nVisit WTB.com to get a glimpse into the next 30 years of mountain bike design.", "label": "No"}
+{"text": "Join Date: Jun 2004\nLocation: Towson, MD\nBikes: 2001 Look KG 241, 1989 Specialized Stump Jumper Comp, 1986 Gatane Performanc\nMentioned: 0 Post(s)\nTagged: 0 Thread(s)\nQuoted: 0 Post(s)\nChain line adjustable on Veloce bottom bracket???\nCalling Campy mechanics....\nI just got a new road bike for my gurl. It has a mix of Centaur and Veloce components. The gearing is a nine speed with a triple crank.\nShe is new to road cycling and having a zillion gear choices but is learning.\nThe problem is that the bike does not like to be ridden in the middle ring/largest rear cog combination. Because the chain stays are short, the chain line in that gear is poor. So, there is a lot of chain noise or, the chain will shift itself off the middle ring and onto the small ring unless she possitions the front derailuere so it is holding the chain on the middler ring (slight rub). The auto gear change is disconserting.\nSo, my question is can the Veloce bottom bracket chain line be adjusted to the left a little without having the BB face of the frame milled?", "label": "No"}
+{"text": "How To Wire A Boat | Beginners Guide With Diagrams | New ...\nIn a boat, electricity is stored in one or more batteries. The batteries are charged by your engine’s alternator, or auxiliary battery charger.ALTERNATOR WIRING... Basic Power Industries\nMany alternators require ignition voltage to initiate charging. You must verify that all required connections are connected to the proper terminal and have the correct voltage in order for the alternator to operate properly.Boat Ignition Switch Wiring Diagram | Free Wiring Diagram\nBoat Ignition Switch Wiring Diagram Collections Of Wiring Diagram for Outboard Ignition Switch Refrence Boat Leisure. Mercury Marine Ignition Switch Wiring Diagram Elegant Showy. Jcb Ignition Switch Wiring Diagram Save Jcb Alternator Wiring. Mercury Marine Ignition Switch Wiring Diagram Elegant Showy.Marine Alternator Wiring Diagram Wiring Diagram Pictures\nMarine Alternator Wiring Diagram (Jun 23, 2019) Hi beloved visitor. Looking for unique ideas is one of the exciting actions however it can be also bored when we could not obtain the expected idea.ELECTRICAL SYSTEMS boatfix\n4E 2 WIRING DIAGRAMS 90 816462 2 695 Wiring Diagrams 3.0L Engine Wiring Diagram (Breaker Points Ignition) 50726 CHOKE SHIFT INTERRUPT SWITCH ALTERNATORWiring an alternator Boat Building & Maintenance Canal ...\nOK, Here is a basic wiring diagram: A view of the connection end of the alternator can be seen in this picture. although the regulator fitted to mine is a 12v one.ELECTRICAL SYSTEMS boatfix\n90 823224 2 796 WIRING DIAGRAMS 4F 1 Wiring Colors for MerCruiser NOTE: Color codes listed below DO NOT apply to fuel injection system harnesses.Boat Building Standards | Basic Electricity | Wiring Your Boat\nA question often asked on boating and boat building forums, and of me by visitors to my web site, is: “I need a simple wiring diagram for a small outboard boat to wire up the lights and few other things, but no one seems to have one. Is there one and where can I find it? Is there a set of step by step instructions?”12 Volt Alternator Installation & Operation Manual\nindicated in wiring diagram included on Page 12. The alternator’s positive and ground cables should The alternator’s positive and ground cables should be sized according to the chart on Page 3.Need Help Wiring a Mando Alternator to a Mercruiser Page ...\nI cant find a diagram of a Mando alternator anywhere, so I'm really looking for confirmation that the wiring is correct, and if so, what else that could have been. Any help would be much appreciated. Thanks!\nboat alternator wiring diagram Gallery\ni have a 2003 glastron 4 3 volvo penta i put a new battery\nboat battery switch wiring diagram u2013 bestharleylinks info\n150cc dune buggy wiring diagram\ngm alternator wiring diagram\nfill rite pump wiring diagram u2013 vivresaville com\ndual battery wiring pirate4x4 com 4 u00d74 and off road forum\nwiring diagram y plan heating system amazing diagram of y plan\nredarc brake controller wiring diagram pores\ninverter 48v 10 000 watts 10kw 120v 240vac 50hz 60hz\nmesmerizing pilot electric brake controller wiring diagram\nwiring diagram lt1 wiring harness diagram 1994 lt1 wiring\nwiring diagram for ford 7 pin trailer\nmercruiser 4 3 ignition dead page 1\nvolvo 940 wiring diagram 1997 29 wiring diagram images\nbasic fuel shutoff solenoid and starter wiring information\ndiagram jeep wrangler yj wiring diagram\n3 wire christmas lights diagram u2013 vivresaville com", "label": "No"}
+{"text": "White Sox Interactive Forums\n> Dave Wilder interviewing for D'backs GM job\nView Full Version :\nDave Wilder interviewing for D'backs GM job\n10-06-2005, 01:16 PM\n10-06-2005, 04:39 PM\njust picked up my intimidators cap from lids dot come, lets see who the 1st sox fan is to notice.\nvBulletin® v3.8.7, Copyright ©2000-2017, vBulletin Solutions, Inc.", "label": "No"}
+{"text": "the realtek sound drivers are on realtec web page. there the older drivers and the hd drivers. the hd are for the newer chipsets.\nif this is a new system and new mb the sound drivers will also be on the mb driver cd. if this is an hp or dell you have to download them from the model number drivers.", "label": "No"}
+{"text": "Fast and fun on the trail, the SDURO HardNine handles rough terrain with ease, while its large tires roll over most obstacles without missing a beat. The pedal assist makes for quick, energy-saving climbing and the bike descends surprisingly well, too. Its front suspension provides a nice level of cushion on bumpy trails and while we missed having a full-suspension on this model, that would have added additional weight and costs.\n“At $500 apiece,” he says, “the company would be selling e-bikes at a loss, once they factored in product liability insurance, quality control, regulatory compliance, safety testing, and post-sales service and support. Chinese e-bikes could certainly ‘leak’ into the U.S. market near that cost, be sold as a loss leader, or be marketed directly on eBay, but a fully costed business model could potentially lose up to $250 per bike.”\n\"Bargain Buys\" Most electric bikes priced less than $600 at big box retailers and on-line are aimed at the kid/teen/toy market. They generally lack the performance and durability that people want and expect. Also, parts and service can be problematic with both big box retailers and on-line vendors. We urge you to invest in a quality e-bike, preferably from a local dealer, that will serve you (and others) for many years. Remember, if it's poorly constructed and you can't get repair parts, it will likely become land-fill material. Save, beg, or borrow the money to get a quality bike or kit.\nIn the 1890s, electric bicycles were documented within various U.S. patents. For example, on 31 December 1895, Ogden Bolton Jr. was granted U.S. Patent 552,271 for a battery-powered bicycle with \"6-pole brush-and-commutator direct current (DC) hub motor mounted in the rear wheel\". There were no gears and the motor could draw up to 100 amperes (A) from a 10-volt battery.\nSpec-wise, this thing is tricked out. You’ve got the option to go with Suntour AION suspension or Fox Float suspension. The drivetrain is Shimano Deore XT. Same with the hydraulic disc brakes. The bike also comes with an ABUS Big Bordo folding lock that is keyed for both the batteries and the lock. Super convenient. There’s also loads of other options within the Delite line. Nuvinci and Rohloff drivetrains, 20mph and 28mph motors, standard and plus tires. You get the idea. Lot to choose from.\n“Our first-generation bike used the same type of 36-volt, 10-amp-hour battery,” he says. “It got between 20 and 30 miles of range, and that’s riding with pedal assist. Using just the throttle you might get 20, less if you’re running on sand or up hills. The charge time is also problematic; with that kind of battery you’re looking at four to six hours, not 90 minutes.”\nThe Dail-E Grinder is perfectly designed to accompany you on your long commute. It's a top-of-the-line road bike in and of itself. BULLS has taken its premium frame and integrated it with the most advanced components from best names in the business. It delivers an unbelievable 118 miles range under ideal conditions. This step-over speed-pedelec is a wonder of German engineering.\nElectric Motor. Having a battery that will last long is just one piece of the puzzle. The electric motor should be powerful enough to move the bike on flat surfaces without any problems and to overcome some low-steep slopes. It will help you out on steeper slopes, it won’t let you down. If the motor or “the engine” is more powerful you’ll be able to accelerate faster and to reach a higher momentum. This will allow you to reach your destination faster and without you getting tired.\nThere are loads of incredible options in 2018. These are the ten I truly believe that riders will enjoy the most for years to come. Keep in mind that electric bikes are the only bike market that is still growing! There is going to be more and more interest in these in the coming years which is going to drive up the value of your bike if you invest early.\nThe Riese & Müller Load Touring HS is billed as “the ultimate minivan of e-bikes,” and it holds up to that claim. With a low center of gravity (aided by the 20-inch front and 26-inch rear wheels) the Load is easy to handle. Tektro hydraulic disc brakes add control, and front and rear suspension provide comfort. The Bosch motor offers an assist up to 275 percent of your effort until you hit 28mph, when it cuts out. The massive cargo space (with side walls) can carry and the two 500Wh batteries give you 12 hours or more of range at full power. It’s capable of toting up to 220 pounds of pets, people, and less-animate cargo. R&M also sells a double child seat for kids up to age 6 and a child-seat fastener for your youngest passengers.\nThe complete integration of the Optibike is achieved from the ground up with a disign focused on high performance, safety, and ease of operation. Front and rear long travel suspension with disc brakes gives the rider confidence. The fully integrated package gives the utmost in convenience allowing the rider to ride on road, off road and the up or down the steepest hills. Optibike is in a class of its own. The Monocoque frame has sleek styling and a low center of gravity for stable handling. All electronics and long-running battery are safely housed inside the frame.\nAnd then add in all of the other e-bike parts including motors, batteries, throttles, speed controllers, etc. All of these parts are mass-produced in China. They simply aren’t available in the US and no one is designing them or manufacturing them. The US would likely have to start by reverse engineering the Chinese products and learning how they produce them. How’s that for irony?\nThe Benno e-Joy promises to be as fun to play with as it is to look at. Benno says it took inspiration from the timeless style of vintage Italian scooters and classic German cars. Add in the functionality of front and rear cargo racks and the 250w pedal-assist motor and you have a beautiful bike that's ready for anything. Cruise into town for groceries, wander comfortably along a gravel path on 2.35-inch balloon tires, or add the child seat attachment and take your kid along for the ride, and beach-goers will appreciate the surfboard rack. Whatever your cycling pleasure pursuit may be, the e-Joy can be your ticket to fun.", "label": "No"}
+{"text": "- Hit the open road with the Barbie convertible\n- Two-seat sparkly pink car for Barbie and a best friend to ride in\n- Wheels really roll to keep Barbie on the go\n- Don’t forget to buckle up with the realistic seatbelts\n- Push the car to Barbie’s next destination\nDiscount pricing accurate as of: 06/17/2019 15:59:38\nDisclaimer: Details, Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.", "label": "No"}
+{"text": "Donate Your Car Today\nLotus Of Siam Restaurant Las Vegas involve some pictures that related each other. Find out the most recent pictures of Lotus Of Siam Restaurant Las Vegas here, and also you can obtain the picture here simply. Lotus Of Siam Restaurant Las Vegas picture put up ang uploaded by Admin that preserved inside our collection.\nLotus Of Siam Restaurant Las Vegas have a graphic associated with the other.\nLotus Of Siam Restaurant Las Vegas In addition, it will include a picture of a kind that could be observed in the gallery of Lotus Of Siam Restaurant Las Vegas. The collection that comprising chosen picture and the best amongst others.\nThey are so many great picture list example donate car to charity that may become your motivation and informational purpose ofLotus Of Siam Restaurant Las Vegas design ideas on your own collections. really is endless you are enjoy and lastly can find the best picture from our collection that put up here and also use for appropriate needs for personal use. The brucall.com team also supplies the picture in High Quality Resolution (HD Resolution) that may be downloaded simply by way.\nYou just have to go through the gallery below theLotus Of Siam Restaurant Las Vegas picture. We offer image Lotus Of Siam Restaurant Las Vegas is similar, because our website give attention to this category, users can navigate easily and we show a simple theme to find images that allow a user to find, if your pictures are on our website and want to complain, you can record a complaint by sending an email is offered. The collection of images Lotus Of Siam Restaurant Las Vegas that are elected immediately by the admin and with high res (HD) as well as facilitated to download images.\nThe picture with high reolusi will aid you in see and monitor our image collections image provided by Www.peterdur.us team also provides home design and outdoor home, to be able to see straight, you can use the category navigation or it could be using a arbitrary post of Lotus Of Siam Restaurant Las Vegas.\nWe hope you enjoy and find one in our best assortment of pictures and get motivated to enhance your residence.\nIf the link is shattered or the image not found onLotus Of Siam Restaurant Las Vegasyou can call us to get pictures that look for We offer imageLotus Of Siam Restaurant Las Vegas is comparable, because our website give attention to this category, users can understand easily and we show a simple theme to search for images that allow a end user to search, if your pictures are on our website and want to complain, you can record a issue by sending a contact is available. donate car ny if you have more money.\nPopular post :\nbattery electric vehicles lifecycle costs\nelectric vehicles sales china\nelectric vehicle systems pdf\nelectric vehicles oil industry\nelectric vehicles bloomberg\nelectric vehicle ranges uk\nelectric vehicle charging stations paris\nelectric vehicle charging stations southern california\nelectric cars motors sale\nelectric cars for sale bc\nused electric vehicles for sale uk\nelectric cars battery issues\nelectric vehicles market\nelectric vehicle charging stations for home\nelectric vehicle charging auckland\nelectric cars best range uk\nelectric vehicles benefits\nelectric cars book pdf\nelectric cars in auckland\nelectric vehicles canada 2018\nelectric cars australia price\ndemand for electric vehicles in india\nelectric vehicle battery disposal\nelectric vehicles in india ppt\nelectric vehicles latest news\nbc hydro electric vehicles\nelectric vehicles training\nelectric vehicle battery pack specifications\nelectric vehicles quiz\nelectric vehicle magazine uk", "label": "No"}
+{"text": "Hire Front Door Repair Experts For All Types of Lakeshore Commercial And Residential Front Door Repair Services. We Offer Fast And Reliable Front Door Latch Repair, Front Door Screen Repair & Front Door Window Repair.\nWhen somebody pays a visit to you, what is the main thing which makes an impression on him/her? Your front door. If your Front Door is Broken, damaged, or not functioning perfectly, it will leave a bad impact on the visitor. A front door adds value to your property. If your front door is not working properly, it is a big threat to the safety and security of your property. At Door Repair Lakeshore we provide a reliable and professional repair service for all kinds of automatic, electronic, Sliding or Rolling Front Doors in Lakeshore, ON. We are a perimeter security specialist. Working with us will make you get to benefit from our certified credentialed crew members that have valuable experience in Front Door Repair Service.\nFront Door Glass Repair in Lakeshore\nThings can go wrong day or night. From a stray ball to unfortunate chips and shatters, our Front Door Glass Repair Services are here to help. With speedy front door glass repair services, our professionals utilize high-quality products at affordable prices. We are able to quickly attend your site, working fast to restore the safety and security of your place. With over 30 years of industry experience providing responsive and Effective Front Door Glass Services, our professionals restore the security and safety of your property - day or night. Visiting residential, retail, corporate, or factory sites throughout Lakeshore, ON, our Glass Door Repair and front door glass repair services give you peace of mind that help is there when you need it most.\nLakeshore Front Door Frame Repair\nHas your front door become somewhat misaligned and can no longer close properly? No need to worry as we can fix the issue in no time. Door Repair Lakeshore provides Expert Front Door Frame Repair Service. Whether your door is dragging along the floor or it makes an unbearable squeaky noise, Door Repair Lakeshore has got the specialists to help you out promptly and efficiently. We are able to replace or Repair Front Door Frame, regarding their purpose and the material they are made from. So whether you need fixing the front glass door or Metal Front Door, we will come and see to the problem right away and repair or Replace the Front Door Frame in no time.\nOur Front Door Repair Services in Lakeshore\nAt Door Repair Lakeshore we offer the following front door repair services for the residents of Lakeshore, ON:\n- Shop Front Door Repair in Lakeshore\n- Commercial Front Door Repair in Lakeshore\n- Lakeshore Front Door Latch Repair\n- Lakeshore Front Door Screen Repair\nDoor Repair Lakeshore provides you with the most affordable prices in Lakeshore for your front door repair service. We have a 100% reliable and efficient team, available 24/7. We offer you our services even on weekends and holidays. You can call our emergency number for Entry Door Repair if you need us at mid-night even. We understand and work for your security and happiness. No one can sleep with a Broken Front Door for sure. Give us a call, and we will be there in a moment.\nLakeshore Shop Front Door Repairs\nIt would be a severe nuisance if your shop front door is stuck and broken. It would be a complete disappointment when your Shop Front Door is not moving the right way. Believe us, we are ready to help. You won't find anything bothering with our services. Just call us online and get the professional help you want in Lakeshore. As soon as the eyes blink, we'll reach and will repair your Shop Front Door quickly.\nCommercial Front Door Repair in Lakeshore\nIf you are a business owner in Lakeshore and want your entry door to get repaired, hire our Specialized Professional Technicians. They'll not only be fixing your Front Entry Door but they are also going to tell you the cost along with the maintenance tools and reasons for which your front entry door got stuck. Furthermore, you'll get to know the duration for fixing the door, the people being involved in fixing the procedure, and any issues in your front entry door which you have never noticed before.\nLakeshore Front Door Latch Repair\nIf your Entry Door Latch And Lock are not working or malfunctioning, you should go for doing the patchwork or should replace it. The front door latch always needs repair after a few months of usage. It's in their designing features, to get repaired, but when they can't be repaired we replace them with a new front door latch for your front door. We are available in Lakeshore 24/7. Call us to have your Front Door Latch Repair now!\nFront Door Screen Repair in Lakeshore\nDoor Repair Lakeshore can repair the front door screen in no time. The team Door Repair Lakeshore ensures the safety and security of your family with our front door repair services in Lakeshore, ON. At Door Repair Lakeshore our trained professional staff knows how to troubleshoot front door screen issues in a hurry, so you can expect an immediate fix. In ON, no matter what your Front Door Screen Repair needs are, Door Repair Lakeshore is always ready to meet your needs.", "label": "No"}
+{"text": "Chevron REG targets renewable fuels production boost\nA biofuels expert says demand for biodiesel and renewable diesel is on the rise and it’s leading to a boost in production.\nPaul Nees, vice president of global supply and trading with Chevron Renewable Energy Group, says expanded capacity is needed. “One of the largest changes we’ve seen here recently is a new entrance into the renewable diesel production base from the oil refining industry.”\nHe tells Brownfield the performance and lower carbon intensity of biodiesel and renewable diesel adds value to farmers. “We’re buying soybean oil, canola oil, fats and tallows produced from the swine and cattle industry. Our added demand is going to incentivize higher prices for those products and encourage a higher production of those as well.”\nNees says Chevron REG has a renewable fuels capacity target of 100,000 barrels per day by 2030.", "label": "No"}
+{"text": "USS Laboon Assists Stranded Sailboat\nStory Number: NNS050720-03\nRelease Date: 7/20/2005 10:41:00 AM\nFrom USS Theodore Roosevelt Public Affairs\nABOARD USS LABOON (NNS) -- USS Laboon (DDG 58), operating in the Atlantic in support of USS Theodore Roosevelt (CVN 71) Carrier Strike Group's Joint Task Force Exercise, assisted a stranded civilian sailboat July 17.\nLaboon received a bridge-to-bridge radio telephone request for assistance from the sailing vessel Long Wei at 2:30 p.m. Long Wei was low on fuel, and her engine would not run for more than a few minutes.\nLong Wei had been adrift for more than 24 hours and was about 125 miles off the coast of Georgia.\nLaboon proceeded to Long Wei's location and dispatched a damage control assistance team.\n\"Providing assistance to such a small sailing vessel and her crew of three was a unique experience for all of those involved,\" said Lt.j.g. Dave Hollon, damage control assistant.\nUpon arrival, the entire rigid hull inflatable (RHIB) crew immediately began troubleshooting, narrowing the source of the problem to the fuel system. After nearly six hours of work and multiple trips delivering fuel, retrieving parts and supplies, the determined cause was faulty fuel pumps and a clogged fuel system.\n\"Although we weren’t able to completely repair the vessel, it was amazing to see the tireless efforts and teamwork provided by our entire boat crew,\" Hollon said.\nDespite the best efforts of the assistance team, the engine on Long Wei required parts that were not readily available at sea. Laboon coordinated assistance efforts with the Charleston, S.C., Coast Guard detachment. USCGC Tarpon (WPB 87310) was dispatched to tow Long Wei in to about 40 miles offshore, where a commercial service boat awaited.\n“Although we were not ultimately able to get them on their way, our crew was eager to help those in need,\" said Laboon Commanding Officer Cmdr. Rob Randall. \"In the end, we helped to get them safely back to shore. It’s another great example of the selfless nature of our Sailors.\"\n|Join the GlobalSecurity.org mailing list|", "label": "No"}
+{"text": "Option 1. Adhesive metallic plate installation. Snug the metal plate between your smart phone and protective case recommended. This option will work with your own aftermarket protective case.\n* case not included *\nOption 2 Stick adhesive metal plate directly on the back of your smartphone that will allow sufficient slack in between the rear of the smartphone and the protective case for the plate to be placed.\nOption 3. Stick adhesive metal plate directly on the back of your smartphone case.\nOption 4. You can place the metal plate between the removable battery cove and battery to hold the metal plate in place for use.", "label": "No"}
+{"text": "Every user deserves a reliable and well-designed power wheelchair with a functional and flexible seating solution that gives the user the freedom to travel safely and comfortably to wherever they need to go. Indoors or out.\nEnter the M1 - a dependable power wheelchair with a low seat height, power options, LED lights, flip-up lockable armrests and powered by the Permobil battery system.\nComfortable reliable drivability\nWith up to 25% greater driving distance, optimized charging times and longer battery life, the Permobil battery system delivers lasting performance and the reliability needed to drive confidently where you need to go.\nDrive in comfort\nSmooth suspension helps to reduce vibration and a low center of gravity with mid-wheel traction means you can drive in comfort for longer.\nThe M1 seating system is a modern take on the traditional rehab seat with an adaptable seating accommodating postural or functional changes over time.\nYou can select from a variety of seating solutions ranging from a simple curved back to the ROHO AGILITY solutions customized to best fit your needs.\nFlip-up lockable armrest and a clever swing-away joystick make transfer and activities of daily life safer and easier. A compact footprint and a foldable backrest option save space when storing or transporting the M1.\nPlaces to go. People to see.\nThe inconvenience of tight spaces, low tables and getting into cars will be a distant memory. With the low seat height of only 410 mm, the M1 makes it easier for you to perform your daily activities.\nPOWER TILT OPTION\nThe power tilt option allows tilting the seat up to 50° to promote a resting position or pressure distribution. Tilt can also be used to improve comfort, trunk stability and head control.\nPOWER ELEVATING LEG REST OPTION\nThe power elevating leg rest option provides the possibility to change position easily for more comfort. It may also contribute to better lower extremity circulation.\nThe Smooth suspension helps to reduce vibration and a lower center of gravity with mid-wheel traction means you can drive in comfort for longer.\nADVANCED BATTERY SYSTEM\nThe Permobil battery and Permobil VoltPro charger work together to provide a longer battery life, optimized charging time and the ability to drive longer distances.\nLED LIGTHS FRONT AND BACK\nGreater visibility and safer driving after dark with LED lights front and back.\nCompatible with BodiLink positioning accessories specially design for Permobil wheelchairs.", "label": "No"}
+{"text": "|Breaking a spoke at the rim||PaulCL|\nOct 3, 2002 5:45 AM\n|I've popped my fair share of spokes over the years. But, this morning, I popped a spoke at the rim. It appears that the nipple cracked. Huh?? I've never had that one before.\nWhat do you think? Just wear and tear on the nipple or should I be concerned about anything else.\nAs an aside....the negative to low spoke count, super light wheels, is that if you pop a spoke, your ride is done. With 32 spokes, do a little loosening then tightening, and keep going. Maybe I should invest in a temporary spoke repair kit.\n|re: Breaking a spoke at the rim||Mike Prince|\nOct 3, 2002 6:18 AM\n|From the tone of your message, sounds like you ride finished early. Bummer.\nAnyway, are the nipples brass or aluminum? I remember a pretty spirited thread a few months back about nipple material with a consensus that there were some risks with alloy nips. Was the spoke on the drive side? Those spokes are tensioned much higher and would be more prone to the damage you describe.\nI'd check the nipples including the damaged one. If it's cracked, I'd write it off as a fluke. If the threads actually tore out, I would seriously consider a rebuild with some (stronger) brass nipples.\n|re: Breaking a spoke at the rim||PaulCL|\nOct 3, 2002 6:44 AM\n|Yes, the aborted ride was a bummer. I rode all of 8 miles before I had to turn around.\nAluminum nipples, non drive side. The nipple cracked. Actually, on the road, I unscrewed the remaining nipple from the spoke and salvaged the spoke. The only reason I salvaged the spoke is becuase it is a Sapim C-Xray spoke which are expensive and very hard to find.\nJust a couple of weeks ago, I had my LBS take a look at that wheel. They did some adjustments - yippee. I guess I should count myself lucky that the spoke broke this morning 8 miles from home. Last Saturday, I did a one way 70 mile ride out into the country. A broken spoke would have been a real bummer.\nSo, brass nipples are stronger?? Maybe I should think about replacing the nipples. Aferall, if one nipple was torqued enough to crack, what about the others??? time to take a hard look at the wheel . Thanks. Paul\n|Broke so many alloy nips I gave up on 'em||cory|\nOct 3, 2002 7:25 AM\n|I'm a Clydesdale, and I'd rather ride than work on the bikes, so I err on the side of strength when I choose wheels. A local shop owner is a former team mechanic and very well-respected, and I've let him talk me into alloy nipples a couple of times. Never again: I've pulled five or six nipples apart on two rear wheels. He's fixing them free, but he's getting tired of fooling with them, too.|\nOct 3, 2002 9:00 AM\n|I weigh 195 so I'm borderline Clyde, but I have broken two alloy nipples on the drive side rear wheel of my commuter bike over a six-month period (Hugi hub, Mavic Open Pro CD rim, DT 14/15 spokes, factory built). I've decided to have the wheel rebuilt using brass nips.|\n|Broken or stripped||PaulCL|\nOct 3, 2002 11:30 AM\n|the nipples. Cracked or ripped out by the threads?? Since I'm around 190, I guess I count as a borderline Clyde myself.\nThis is the third spoke I've popped this year - but the first at the nipple. In fact, this is the third spoke I've popped in the last four years. I guess bad luck runs in bunches.....\n|Broken or stripped||KEN2|\nOct 3, 2002 12:57 PM\n|The nipple head inside the wheel broke away from the rest, tne spoke was intact in the threads.|\n|re: Breaking a spoke at the rim||SingleThreaded|\nOct 3, 2002 8:15 PM\n|I sheared 3 alloy nipples off my 20 spoke front wheel. The first at 1500 miles, and the others about 100 miles and 200 miles later. LBS rebuilt wheel with brass nipples and 500 miles later wheel workin just fine.|| |", "label": "No"}
+{"text": "Tue, Oct 2 2012 10:47 pm |\nThe long anticipated Chase Hawk tire is finally available from the fine folks at Odyssey. In the age of gigantic tires this one is sure to get some serious attention, with an option that clocks in at 2.4″. If you saw our bike check with Broc Raiford, you can see that he’s running the 2.4″ behemoths in the front and rear, so all of you brakeless street kids itching to fill up some space in your rear triangle, get at your local bike shop or quality mailorder to get your hands on some.\nTAGS: Chase Hawk, chase hawk tire, odyssey bmx, product, Products\nNo related posts.", "label": "No"}
+{"text": "SFC Europe is committed to customer service. All aspects of stock and manufacturing are programmed to meet deliveries correct, on time, every time.\nSFC Europe welcomes its customers to visit its facilities to view and audit its manufacturing and stock control systems and discuss in detail specific needs for integrated supply including:\nCustom Packing and labelling.\nInspection and Sampling.\nDrawing and Specification control.", "label": "No"}
+{"text": "Dark Alder Interior\nLightly used 4 - horse, bumper pull, step up trailer with new tires and lights. Rubber flooring for easy horse entrance and exit. Spacious tack room. This…\nSlant Load, Bumper Pull\nPurchased new from dealer in April 2017 – hauled home and never used.\nSame trailer selling new at dealer for $13,600+ (without…", "label": "No"}
+{"text": "2020 Specialized Turbo Levo SL Comp – To Order\nLighter in weight, with no compromise to range or ride time, the new Turbo Levo SL range starts here with the aluminium Comp version.\nThis all-new e-bike, the Specialized Turbo Levo SL Comp, looks like a Stumpjumper and out on the trail it feels like one too. That’s no mistake. Specialized aimed to build a Stumpjumper with a bit more boost to it and that’s exactly what you get - similar Sidearm chassis with great, balanced stiffness and 150mm of smooth, custom-tuned suspension. The Turbo Levo SL Comp’s chassis is constructed entirely from light-yet-strong M5 premium aluminum.\nWhat is new with this SL version of the Turbo Levo?\nThe lightweight SL 1.1 motor doubles your effort with as much as 240 watts of silent and powerful assistance to your pedals. The motor’s responsive torque curve delivers power perfectly in-tune with your normal riding cadence and leaves no resistance when you’re riding without power assistance.\nWorried about running out of power? No problem. The Turbo Levo SL eats up big miles and long days. And if you’re looking for even more miles, the optional range extender boosts your range by another 50 percent. On top of all that, Specialized's Mission Control App can handle battery management automatically, ensuring your battery will last as long as you need it to.\nRead more about the 2020 Turbo Levo SL Comp on the Specialized Bikes website HERE\nWatch Specialized's Turbo Levo SL video HERE\nLearn more about the Specialized Mission Control APP HERE\n- M5 Aluminium frame, FSR suspension\n- Suspension travel 150mm front and rear\n- Fox Rhythm 34 Float 29 fork\n- Fox Float DPS rear shock\n- Specialized SL 1.1 Custom lightweight motor (240W)\n- Fully integrated 320Wh battery\n- SRAM NX Eagle 1x12 transmission\n- SRAM Guide R disc brakes\n- X-Fusion Manic dropper seatpost", "label": "No"}
+{"text": "MISSION CONTROL WIRE DIAGRAM\nMission Control Wire Diagram | Wiring Diagram\nMission Control Wire Diagram double light switch schematic wiring diagram 1979 toyota corolla wiring diagram fedders furnace wiring diagram dual car stereo wiring diagrams fuse box for 1999 lincoln navigator electric acoustic guitar wiring diagram diagram for wiring 2 switches in one box hazard and turn signal wiring diagram fiat multipla\nProject Apollo Drawings and Technical Diagrams - NASA\nProject Apollo Drawings and Technical Diagrams : Apollo Spacecraft Launch Configuration from Apollo Program Summary Report (April 1975) Apollo Command and Service Modules and Launch Escape System from Apollo Program Summary Report (April 1975) Command Module Main Control Panel from Apollo Operations Handbook Block II Spacecraft[PDF]\nM110/M800 RTU Installation Instructions - App4Water\nvery important to only provide 12 -16 VAC to the Mission main board AC input. The transformer should NOT be mounted in the Mission RTU enclosure. Mount transformer in control panel if possible. It is highly recommended that after you wire up the 120 VAC\nWiring Diagram - Everything You Need to Know About Wiring\nWiring diagrams show how the wires are connected and where they should located in the actual device, as well as the physical connections between all the components. How is a Wiring Diagram Different from a Pictorial Diagram? Unlike a pictorial diagram, a wiring diagram uses abstract or simplified shapes and lines to show components.\nTrailer Wiring Diagram – Lights, Brakes, Routing, Wires\nTypical Trailer Wiring Diagram and Schematic. These 2 wire diagrams fit the needs for most trailers. The image above shows a single axle trailer, and the next image shows wiring for Tandem Axles. Only the (blue) brake and (white) ground wires are different.\nMassey Ferguson Service Workshop Manuals - Wiring Diagrams\nMassey Ferguson MF 3600 - Download Workshop Service Manual Massey Ferguson MF 4200 - Download Workshop Service Manual Massey Ferguson MF 6140 - Download Tractor Service Repair Manual Massey Ferguson MF 6495 Tractor Service Repair Manual Specifications 02 - Splitting the tractor 03 - Engine 05 - Gearbox 06 - Rear axle 07 - Power take off 08 - Front axle 09 - Hydraulics 10 -\nWIRING DIAGRAMS Repair Guide - AutoZone\nAutoZone Repair Guide for your Chassis Electrical Wiring Diagrams Wiring Diagrams[PDF]\nSERVICE MANUAL - Navistar\n3200, 4200, 4300, 4400, 7300, 7400, 7500, 7600, 8500, 8600 SERIES Built After March 10, 2004 — ELECTRICAL CIRCUIT DIAGRAMS i Table of Contents\nFlight Controller F405-CTR – Matek Systems\nMission Planner Acknowledgements Step By Step Guide | Arduplane/Chibios On Matek F405-Wing Board This video is for F405-WING, F405-CTR uses target “MatekF405”\nTrailer Wiring Diagram - Wiring Diagrams For Trailers\nVarious styles of connectors are available with four to seven pins to allow transfer of power for the lighting as well as auxiliary functions such as electric trailer brake control, backup lights etc. The trailer wiring diagrams listed below, should help identify any wiring issues you may have with your trailer.\nRelated searches for mission control wire diagram\ncontrol wiring diagramscontrol system diagrammotor control diagramelectrical wire diagramcontrol wire cable", "label": "No"}
+{"text": "Gate Latch Cap\n- Gate Latch Cap designed to fit over a 2 3/8\" post or inside a 2 7/8\" post.\n- The caps have a piece of flat stock steel welded on top, which can be drilled to match a bolt pattern on most wire gate latches.\n- Latches can also be welded to the plate if preferred.\n- Once the gate is placed on the post, simply drill a hole through the cap and post to accommodate a wire clip.\n- Use tie wire to hold the clip in to allow for removal or repair if required.", "label": "No"}
+{"text": "http://www.bikemanforu.com/ Wheel restoration continues with a lot of cone wrench usage. First, BikemanforU delves into his Schwinn Speedster bike restoration with metal rivet repair on a chrome fender using his mother’s father’s anvil. Sebastian gloves up for some major wheel cleaning. The axle, cups, bearing retaining washers and bearings all undergo a thorough brushing. Then […]\nSwagman XC Cross-Country 2-Bike Hitch Mount Rack (1/1/4 and 2-Inch Receiver)\nThis bike carrier provides a stress-free way to transport your bikes. Each bike is secured at both wheels and the frame, providing a more stable and safe ride. Cushioned hooks are adjustable for different sized bikes and ratchet down for a tight fit. The frame grip arms are coated with a soft-frame-friendly finish to protect the bike. The rack folds up for compact and easy storage. The rack comes with a built-in anti-wobble hitch device. Locking hitch pin and security cable are available sold separately.Carries up to 2 bikes\nFits a 1-1/4″ and 2″ hitch reciever\nMax load capacity: 35lbs per bike\nCenter arm folds down to allow access to the rear-of-vehicle without removing the rack\nUpright ratcheting arms easily adjust to different bike frame sizes\nTransports up to 2 bikes, compatible with 1 1/4″ and 2″ receiver hitch also has a built in anti woble hitch device. Takes only a few minutes to assemble. | Max Load 35lbs per bike\nUpright ratchet arms easily adjust to different bike frame sizes, will accommodate bike frames up to 59 cm.\nCenter arm folds down to allow access to the rear of the vehicle without removing the rack.\nFits 20′ to 29″ tire sizes.\nLocking hitch pin required by manufacturer is item No. 64029\nClick here for the best deals online for mountain bikes, hybrid bikes, electric bikes and all types of bicycle parts and accessories.", "label": "No"}
+{"text": "i have a specialized hard rock from about 3 years back and i want to convert it to a dirt jumper.\nits a hard tail. id have to buy a Single Sprocket for 1 gears.\nnew rear brake.\nnew tires and front shocks.\nmy question is would it be cheaper to buy a brand new dirt jumper from a shop or is doing this cheaper??\n+K for help.\ni could also you tips on what to buy and others.", "label": "No"}
+{"text": "Thread: 2000 xl800 missing powervalve!\n07-13-2013, 01:02 AM #1\n- Join Date\n- Jul 2012\n2000 xl800 missing powervalve!\nI just bought a Yamaha 2000 xl800. So far we have run it for a full day before buying it. It started fine, ran fine. No noticeable issues. Top end was about 42mph.\nAfter getting home, I started reading up on what we had just bought, and found that this model had a design flaw with the powervalves which could cause a catastrophic failure. I decided to buy and install the wave eater clips. The inside of this ski was so pristine, I did not believe it had ever been apart. I took it apart to get at the powervalve covers. I found the rear valve was intact but had a lot of thick sludge on the inside of the valve cover. The front valve though was completely missing! The control shaft and arm were there as well as the sleeve that comes on the powervalve was there and secured by a screw. The valve, the valve shaft, and pin which seats in the control arm were all gone. I can see the top of the piston. It does not seem to be damaged in any way. The top edge of the piston has a perfect edge on it.\nIs it surprising this ski ran quite well without the front powervalve?\nIt seems insane, but could it have shipped like this from the factory? I have read a couple similar threads.\nWhat should I do next? Should I just install a new powervalve and put the ski back together?\nUsers Browsing this Thread\nThere are currently 1 users browsing this thread. (0 members and 1 guests)\nBy bscpant in forum Yamaha 2 Stroke SkisReplies: 8Last Post: 04-07-2013, 07:12 PM\nBy napz22 in forum Yamaha Open DiscussionReplies: 0Last Post: 03-14-2012, 09:41 PM\nBy RODNEY1960 in forum 2-Stroke PerformanceReplies: 0Last Post: 04-27-2011, 08:00 AM\nBy vodomagoo in forum Sea Doo Open DiscussionReplies: 0Last Post: 07-25-2009, 01:43 PM\nBy havanabama in forum Yamaha How To & FAQsReplies: 13Last Post: 08-17-2007, 09:42 PM", "label": "No"}
+{"text": "The Sam Drive\nslim-line floppy drives from Citizen had been withdrawn them from the European market in 1990 and were replaced with standard 3.5 inch drives which required some modification to the front drive plates for the faces to stick out.\nIf two drives were installed this had to be done as a factory modification, the SIPI\nwas mounted vertically in the left hand bay and the extra floppy drive controller 'stacked' on top of the one in the right hand bay with a ribbon cable running to the drive in the left hand bay.\nThe Parallel interface was squeezed into the case and had a port on the back of the plastic case keyboard wedge above the Euroconnector.", "label": "No"}
+{"text": "Join Date: Sep 2007\nLocation: Dallas area, Texas\nMentioned: 1 Post(s)\nTagged: 0 Thread(s)\nQuoted: 54 Post(s)\nI've got a similar project on the back burner here. But the bike I have is a single speed.\nMy Worksman Industrial Cruiser is geared at 2:1 (I think 44:22). It looks like if I remove the stoker crank entirely, use the smaller timing chain gear on the main pedals, it should put me at a little bit lower gear than my Cruiser. That would give me a speed of maybe 12 mph and still enough power to get up the small rises between my house and Walmart.\nI was figuring remove the rear seat, rear handle bars, and rear crank, and build a container on the back part of the bike that would hang down on both sides to carry grocery bags.\nMy bike is smallish frame (it's a Huffy) and the front pedals are closer to the front wheel than a normal cruiser, so it'll be interesting.\n\"be careful this rando stuff is addictive and dan's the 'pusher'.\"", "label": "No"}
+{"text": "Every day a lot more people decide to leave their cars behind and commence by using this eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU. Aside from being affordable, e-scooters do not emit polluting gases and represent a significant cost reduction because they do not require fuel.\nThe best eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU.\nAs we mentioned earlier, we want our customers to enjoy all the benefits of the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU. That’s why we have come up with the main information for your needs. For instance, you will see how to choose the right electric scooter for your needs. We also mention which types are on offer and how to manage your eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU to make certain that it serves you so long as possible.\nInformation on, how far will the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU go with one charge session?\nThe e-scooters have either lead-acid or lithium batteries. Truly the only benefit of the lead-acid battery is its low price which is mostly only used in “children’s” models. The lithium battery has a much higher capacity with a lower weight and size.\nThe capability for the battery as well as its quality have a good impact on just how many kilometres your eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU will drive after each charge. The bigger the capability, the bigger quantity of kilometres.\nWould you intend to make use of your mobility e-scooter daily or in other words on weekends? In the event that you have a tendency to do the former, we recommend you get a model with higher power and battery capacity.\nEach manual of every form of e-scooters states how many kilometres it will be possible to drive it after every time you charge it. However, take this parameter as an informative guide only. Circumstances such as for example rider weight, hilly terrain, riding style (steady is more economical), headwind, temperature (battery capacity decreases in winter), etc. have a significant effect on the sum total distance.\nWhen and what’s the appropriate strategy to get my eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU recharged?\nThe eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU are charged via a principal adapter. For safety reasons also to protect battery pack life, the mobility e-scooter must never be charged at temperatures below 5 °C or above 45 °C. Always utilize the main adaptor available to charge the electric scooter.\nCould I purchase my eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU in goelectric shop?.\nOur page centers on urban e-scooter for adults and for kids. As we realize that our site is visited by beginners who will be just starting, there are lots of useful information here to help you find the appropriate one for you.\nJust below you will find the key point you’ll want to consider when buying the e-scooter from any store:\n- Autonomy of the scooter\n- Proper dimensions for the individual who is going to make use of it\n- Look out for better prices\n- What material is the e-scooter made of?\n- Road of field, city or countryside?\n- Use you are going to give it\n- The length of time have you been riding the eco scooter a week?\n- Are you planning on selling it quickly back?\n- Does it come with a head protection and all the needed accessories?\nCharacteristics upon which the price tag on the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU depends\nThere are certain variables which will then determine the buying price of an innovative new eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU. They are the material, the utmost speed, the frequency of intended use and the terrain you will be traveling on most often, plus the associated battery life.\nkinds of electric urban scooters and differences between them.\nThe point you intend to buy the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU for, is amongst the first questions you really need to ask yourself before buying it. You need to use it for your regular trips across the town, and compliment of its light weight and great compactness, you can take it anywhere. Nonetheless it also can serve as a way of transport that can be used to go for longer trips in a park or around a lake.\nEco electric scooter for 2 adults with passenger or kids seat near Bunbury AU when it comes to town or difficult terrains.\nWhen choosing your electric scooter, think about whether your daily commute is much more within the city or you have to go through more challenging terrain. Nevertheless you need to know that the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU is suitable for all kinds of terrains, although you must not get into puddles or almost any watery places.\nScooter for tough surfaces for countryside individuals.\nIf you want to take your mobility e-scooter to you on trips, seek out solid models with larger, top-quality wheels that may manage harsh surface. Well-sprung, inflatable tires are good for off-road usage. These types of wheels may also be appropriate unpaved roads such as gravel or sand. Nevertheless, there is absolutely no navigating around regular inflation, as well as in the occasion of a puncture, the wheel casing is replaced while you would often do.\nWith your kinds, the energy must certainly be at the very least above 500 Watt, ideally between 850 and 1100 Watt, depending from the terrain. With such a strong scooter, you can also tackle hilly terrain. The speed in cases like this is generally into the number of 45 – 50 km/h while the distance you can easily drive is 40 – 60 kilometer. The purchase price is greater in cases like this.\nUrban scooters for folks who prefers their town.\nElectric powered scooters designed for getting around town will often have efficient polyurethane tires being perfect plus enough to get around on firm and flat surface. The wheels might need replacing in the long run and you also cannot really avoid changing them completely.\nSome models are folded up and taken on trains and buses. They’re frequently less effective, but the greater battery capacity is sufficient to circumvent town. Many of these mobility e-scooters have the potential to achieve a rate of approximately 24 km/h, not to mention drive a long distance somewhere between 16 and 35 km, with respect to the battery pack capability. The effectiveness of the engine is generally into the number of 250 – 350 Watt. general, they are smaller and less heavy kinds which have the main advantage of simply being more financially available.\nMaterials that manufacturers used to build their scooters.\nA good eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU must have a good and sturdy frame made of steel or duraluminium. E-scooters manufactured from steel are slightly heavy. When you is supposed to be carrying the e-scooter frequently, choose a eco scooter made from duraluminium. Each materials are of equal quality and certainly will offer you a secure trip. Anyhow this is basically the classification of materials which can be used in order to make these types of scooters.\n- Steel is a very durable and robust product with a lengthy solution life. Suited to off-road scooters.\n- Duralumin is a powerful and lightweight material. Suited to e-scooters that you understand you will often carry.\n- Aluminum is fairly priced. Ideal product for children and novices.\nExactly how long does the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU operate on just 1 charge?\nExactly how very long you can easily ride your eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU depends upon the capacity of this battery it offers. Quite often you will confront a variety of 15-30 kilometer, more hardly ever it may be up to 50 kilometer. The charging time for battery pack it self is around two and 5 hours. Needless to say, it depends on the sort of battery, with the lithium battery pack always being the better quality.\nThe positioning associated with battery pack it self can also be extremely important. If you anticipate to carry the electric scooter often – over curbs, rails, various surface humps, etc. – it is wise to select a eco scooter in which the battery is situated from the front side axle. This will make it simpler to manoeuvre the scooter, which additionally pertains to holding it.\nYou can help the battery lifetime by traveling much more smoothly, on more even terrain and at a reliable speed.\nEco electric scooter for 2 adults with passenger or kids seat near Bunbury AU sizes and also weight.\nChildren’s electrical scooters.\nE-scooters for the kids are little and have now modifiable handlebar length. Those for the youngest usually drive as much as 15 kms and their engine power is as much as around 100 W. They normally have a reduced weight such that it is a lot easier for the kids to address them, nevertheless they also have a lower load capacity.\nEco electric scooter for 2 adults with passenger or kids seat near Bunbury AU for adults\nElectrical powered scooters for grownups are often somewhat heavier while having a greater carrying capacity. Motor energy and range are somewhat higher.\n- Electric powered scooters with 24V batteries and a engine up to approx. 350Watt are basically intended for children as much as a weight of approx. 50 kg.\n- Electric powered scooters with 36Volt batteries and brushless engines in the back wheels as much as 350Watt can additionally carry individuals around 80-90 kg plus the engine already has sufficient energy supported by 36V. They may be suggested for children from about a decade.\n- Urban e-scooters with 36Volt or 48Volt and motors from 800Watt can very quickly move individuals up to approx. 150 kg while the engine has really high energy. These are ideal for consumers aged 15 and over due into the high energy.\nEco electric scooter for 2 adults with passenger or kids seat near Bunbury AU the highest possible pace and speed limit.\nThe amount of power additionally determines the speed that the mobility e-scooters can reach. The rate normally impacted by the weight for the user therefore the nature for the landscapes. To alter the speed, the mobility e-scooters are loaded with a button or lever in order to control your eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU completely easily.\nRegarding kiddies as well as beginners, a speed of approximately 20 km/h is enough. More knowledgeable consumers could drive at a speed as much as 50 kilometer. Faster machines are also available, however they are mainly for very experienced users who is able to manage such fast machines.\nEco electric scooter for 2 adults with passenger or kids seat near Bunbury AU wheels size.\nAdditionally focus on the size of the wheels. The larger ones get faster and it is harder to manage the scooter.\nThis is exactly why, mobility e-scooters with larger tires aren’t suitable for which you will encounter numerous pedestrians (e.g. on period paths) – also a seasoned driver could have trouble avoiding others. As a driver that is still unsure of his / her capabilities, choose wheels with a size of 6-6.5″.\nFor less experienced cyclists, 5-6.5″ wheels are suitable. For skilled riders and off-road use, choose larger models. The larger the tires, the greater the rate, but the worse and much more demanding the electric scooter control.\nKinds of brakes.\nYou may select from 2 kinds of brake system. Much more popular are the original technical disk brakes, which may be controlled with a handle. The mobility e-scooter is equipped with 1 or 2 mechanical brake system. Bicycles are also loaded with these brakes and so require no further introduction.\nElectro-magnetic brakes tend to be much less frequent. The disadvantages of the brake system are lower efficiency, extended braking distances and the undeniable fact that people aren’t therefore knowledgeable about them as with technical brake system.\nGenerally speaking, small electric powered scooters with velocities up to 30 km/h are built with both forms of brake system. In this instance, their dependability and efficiency are nearly identical. For mobility e-scooters which can be driven at rates above 25 km/h, it is far better to choose mechanical brake system.\nAdvantages of every type of breaks.\nThe technical brake functions pushing the braking area contrary to the wheel. It generally does not require electrical energy.\nThe electromagnetic brake is a disk braking system. It really is more effective, but only works together with assistance from a battery.\nCombined brakes ensures that both types of brakes are employed. Mechanical brake for security and disk braking system for quicker reaction.\nLoad Capability of the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU.\nThe strain capability is yet another key characteristic that you ought to start thinking about and keep in mind. Moreover be aware that if you are travelling with huge rucksack in your straight back, you might be incorporating a few additional kilos towards the scales that can place you over the limitation.\nFeatures of this eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU.\nThe eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU is a favorite way of metropolitan transportation that can relieve the streets of vehicles and help to make traffic in larger metropolitan areas more efficient. For the user, the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU has lots of advantages:\n- Simple to operate. Anybody can ride the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU\n- Effortless to carry. By way of its foldable design, the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU may be quickly folded to a tight size, so you’ll go on it to you on trains and buses.\n- Its operation is green.\n- It really is more affordable to operate and get than a vehicle or a motorbike.\n- It encourages health in a normal way. Although it may maybe not seem obvious, also riding the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU involves muscles – sitting on a electric scooter calls for the usage the rear and core muscles, while the arms assistance stabilize the scooter.\n- It brings a brand new way of having enjoyable. You need to use it not just for commuting but in addition for amusement.\nHow to clean and maintain your e-scooter in perfect conditions?\nMuch like most items, care and frequency of use play an important part within the lifespan of eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU. The lifetime of an electric scooter alone is expected at 4 – decade with care and usage.\nWhen to charge the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU battery.\nNever ever keep battery pack to go flat, recharge it instantly when it is entirely discharged. Should you not utilize the electric scooter for a few months, charge the battery to 100%. In addition, its advisable to switch the urban e-scooterr on quickly each month, run the motor for several minutes and recharge the battery to 100% once again. Enable the battery to charge to full ability after linking the charger – try not to interrupt the recharging process. After a lengthy ride, let the battery cool off for half an hour before linking it to the charger. Do the same after a ride in icy climate.\nCleaning your new and beautiful eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU.\n- Wash the eco scooter with a gentle cloth. If dust may not be removed, make use of a delicate fabric moistened with soapy water. Avoid using cleansing agents or solvents such as gasoline, liquor, ammonia, etc.. These solvents can harm the synthetic components of the product.\n- If you learn scratches on the synthetic areas of the electric scooter, polish them off.\n- Don’t use a high-pressure cleaner to completely clean the electric scooter.\n- Make sure that the electric scooter is switched off during cleansing and don’t charge the electric scooter while cleaning.\n- Shop the electric scooter in a very good, dry destination you should definitely in use.\n- Usually do not store the electric scooter outside for an extended time of time. Extortionate sunshine, way too high or too cold weather promote tyre aging and lower the lifespan associated with urban e-scooter and the battery.\nAdvances for brakes maintaining plus cleaning.\nTricks on the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU brakes cleaning\nIt is crucial to help keep your mobility e-scooter clean to steadfastly keep up its proper function. Dirt and dirt damage the moving components of the e-scooter in particular.\nHigh-pressure water cleaners aren’t suited to cleaning the scooter. Water can penetrate the bearings, ruthless can remove lubricating oils and Vaseline. Handbook cleaning for the eco scooter is definitely best.\nTips on the eco electric scooter for 2 adults with passenger or kids seat near Bunbury AU brakes lubrication.\nCare for all moving areas of the scooter. Lubricants made for cars and motorbikes are not appropriate use on eco scooters.\nAvoid using lubricant to the brake discs. Its recommended to sporadically lubricate the pivot tips associated with brake levers and shoes.", "label": "No"}
+{"text": "These tights are made from Power Plya and Oiselle's stretchy reflective mesh, and they feature a spacious rear zip pocket and no outside seams. The reflective mesh makes you shine brightly in the dark so you're seen easily by cars and bikes any time of the day!\n- Power Plya (polyester / spandex)\n- Reflective Mesh trim at rear waist and ankle (polyamide / lycra)\n- zippered pocket at rear waist\n- interior drawcord\n- 25\" inseam", "label": "No"}
+{"text": "(WASHINGTON) — An incorrectly installed section of main engine fuel oil return tubing led to an engine room fire aboard a containership off the coast of Santa Barbara, Calif., the National Transportation Safety Board (NTSB) said Tuesday.\nMarine Investigation Report 22/15 details the NTSB’s investigation of the April 28, 2021, fire aboard the containership President Eisenhower while transiting through the Santa Barbara Channel. The vessel was transiting to Oakland, Calif., with a crew of 22. The crew extinguished the fire using the engine room’s fixed carbon-dioxide fire extinguishing system. As a result of the fire, the vessel lost propulsion and drifted for several hours before being towed to the Port of Los Angeles. No pollution or injuries were reported. Damage to the vessel totaled an estimated $8.22 million.\nA crewmember on watch noticed smoke coming from an open engine room hatch early in the morning on April 28. Two crewmembers donned firefighter outfits and attempted to use portable fire extinguishers to quell the fire. Realizing the fire was “too much,” the captain decided to release carbon dioxide into the engine room.\nThe day before the vessel’s departure, the second engineer installed a new section of steel fuel oil return tubing for the main engine. A post-fire examination showed that a compression fitting on the end of the newly installed section of fuel return tubing had disconnected, causing the ultra-low sulfur diesel fuel oil the engine was burning to spray.\nCCTV footage from the vessel showed diesel oil spray about 30 minutes before the fire started. Within one minute after the fire started, cardboard and wooden boxes of spare parts, which were stored one deck above the main engine and next to the auxiliary boiler, caught on fire.\nInvestigators found that an unshielded and uninsulated exhaust valve compensator flange acted as an ignition source for the spraying diesel fuel. An examination of the disconnected fuel oil return tubing and failed compression fitting revealed that the compression fitting’s sealing ferrule was not sufficiently swaged to the steel tubing.\nThe NTSB determined the probable cause of the engine room fire aboard President Eisenhower was a crewmember insufficiently swaging a compression fitting ferrule during the installation of fuel oil return tubing for a main engine’s cylinder, allowing an end of the tubing to disconnect and spray fuel oil onto a nearby unshielded and uninsulated cylinder exhaust component.\nNTSB identified two lessons learned from this investigation:\n• Rapid oil leak detection systems are a valuable tool that can be used to prevent fire in machinery spaces. Video analytic technology is designed to use standard CCTV video to detect fuel mist and spray in real time and alert the crew before any ignition and fire.\n• The crew of President Eisenhower effectively contained the spread of a main engine room fire by removing fuel and oxygen sources, cooling boundaries, and communicating effectively. This shows the importance of realistic scenario-based training, including engine room emergencies, which involve shutting down machinery, fuel oil, lube oil, and ventilation systems, as well as boundary monitoring, to quickly contain and suppress engine room fires, which can spread to other spaces and/or cause a loss of propulsion and electrical power.\n– National Transportation Safety Board", "label": "No"}
+{"text": "Alstrong has introduced the Auctus M, a fully-mounted variant of the trailed Auctus T. The key difference between the two models is the trailed model, which we looked at in the July 2017 issue, has an additional prismatic ring roller and of course the running gear to carry the 4.5t machine.\nThe 2.3t (empty weight) mounted model has the same two rows of scarifying paddles, 610mm diameter aerating roller and rear spring tines. The model on show was fitted with a Doyle air seeder of which there are two versions; one where you drive with at a fixed speed and the other with GPS alter the metering in relation to the forward speed.\nAlan Winters points out the original Auctus was indeed mounted but with just one row of front tines which was not ideal for pre-cultivated ground and had manual adjustment, whereas the newcomer is hydraulic.\nPrice as shown is €16,000 with the fixed speed seeder.", "label": "No"}
+{"text": "EV conversions for Marine applications\nWhy convert your boat to electric?\nOur electric drive systems offer unparalleled performance, reliability, whisper quiet operation, and are a virtually maintenance free alternative to conventional internal combustion engine drive systems. Contact us for details\n5kWh: Installed starting at $9,995*\n*Cost may vary depending on vessel type, desired speed and range.\n**Range may vary depending on vessel type and weather conditions.", "label": "No"}
+{"text": "Harry Rowland makes some fabulous no-nonsense wheels and these lightweight offerings provide commendable performance for the money.\nThe Novatec alloy hubs house sealed bearings with shielding that was good enough to keep them running light throughout some atrocious test conditions.\nThe rims are Mavic’s dependable Open Pro all-rounders – reasonably light with a decent level of stiffness and double eyelets to add plenty of strength at the spoke holes – and Harry goes for a 32-spoke, three-cross build for both the front and rear.\nThe spoke tension of our set was pretty good when we received them and it stayed that way through all our abuse. And although the rims were only reasonably true out-of-the-box, that didn’t change either, which was nice.\nOur 80kg rider got a minimal amount of brake block rub when sprinting out of the saddle but they are light enough for fast acceleration at 806g (front) and 973g (rear).\n|Name||Mavic Open Pro/ Novatec Hubs|\n|Description||Mavic Open Pro rims on Novatec hubs|\n|Manufacturer's Description||Contact 01843 597443 for more information|\n|Spokes Lacing||Crossed 3|\n|Front Spoke Count||32|\n|Front Wheel Weight||806|\n|Rear Spoke Count||32|\n|Rear Wheel Weight||973|", "label": "No"}
+{"text": "Well, I decided that I can afford to spend the extra on a Stihl instead, so I am wondering a few things about them. Right now, I am looking at the new 430, the 500, 550, and the big 600. Now, the problem is, why is the 500 more then 550? I know the 600 is the top of the line one. Is the 550 being phased out? Why is it 30 dollars cheaper then the 500? The 430 is supposed to be a stratocharged 2 stoke, but how does it compare to a 4 mix?", "label": "No"}
+{"text": "Any wheelchair user will confirm that wheelchair accessories are Godsend. They have numerous benefits and make everyday life in a wheelchair comfortable while at the same time enhancing your independence. The choice of the accessories varies with among other things your type of wheelchair, your day to day life; whether you are a student, sports person or other. It is important to also choose accessories based on whether the wheelchair is going to be used indoors or outdoors.\nKeep reading to find out must-have accessories for improved mobility and comfort as you go about your daily routine.\nPicture how unsettling it would feel if you were to ride a wheelchair you had to stretch and strain to reach the breaks handle. Sometimes the standard break handles seem to be short and an extension is needed to ensure you access the break easily. This is vital for your safety and the safety of other road users.\nAn Additional Off-road Front wheel\nAdding off-road front wheels on your manual wheelchair will increase your mobility on sandy roads, grassy patches, and muddy pavements and even on paving slabs. Here is how it works: The added off-road front wheels increase propulsion and the result is excellent mobility. Continue reading", "label": "No"}
+{"text": "SMITE: Update Highlights – Queen of the Underworld\nThe latest SMITE update is here, and with it comes the arrival of the “Queen of the Underworld”, Persephone! Here are the high points of this update, and the patch notes are found below.\nVideos You May Enjoy\nArticles You May Enjoy\n- RUF Cars are heading to Auto Club Revolution Garages\n- Auto Club Revolution announces that RUF cars are coming to the ACR garage.\n- Wakfu Reveals Developmental Roadmap And Trool Fair\n- Square Enix and Ankama have announced their developmental road map for the rest of 2012, as well as revealed a new event coming in July.", "label": "No"}
+{"text": "This next build is Trumpeter’s 1/48 ERA-3B of VAQ-33. This is being built for a Chief Petty Officer who was part of the air crew. The Douglas A-3 Skywarrior was originally built as a jet bomber in the 1950’s. It evolved into a few variants. The KA-3 was used as a refueling craft. The ERA-3B was an ELINT (Electronic Intelligence) role used in Viet Nam and for many years during the Cold War. It performed briefly during the Gulf War then was finally retired in September 1991.\nI will be adding photo etch details from Eduard. Starting with the cockpit I detailed the 3 seats, rear bulkhead, dash and equipment rack. The photo etch set even includes the handles for the electronic equipment. I then built up the nose radar assembly and the nose gear bay. There were no extra details for the radar but the nose gear bay had detailed photo etch walls and wiring. I added some hydraulic lines as well with 32awg wire. Next was the electronic ELINT cabin that sits behind the cockpit. There were no details except for seat belts so I added some cushions using cloth tape. Next up will be detailing the main gear bays then assembling the fuselage.\nThis week’s update covers a lot. With the current virus situation I have more time on the bench. To begin with I used the photo etch accessories to detail the main gear bays, The air brakes, the rear wheel bay, and the tail hook area. I then noticed on the reference photos there is a scoop aft of the air brake on the starboard side. The kit provides a very crude representation of this. I trimmed the edge then scratch built the intake vanes. The kit comes with detailed engines so I built them up and added some detailed plumbing with some wire then built up the engine assembly. Fir the exhaust and the rear engine housing I used pastel chalk to weather them. Starting at the exhaust I used black faded to brown and finally blue to represent the heat discoloration of the panels.\nDetails on using pastel chalk is in my Tips and Tricks section Weathering with Pastel Chalk\nAnother thing that I noticed in the reference photos is they forgot to add the chaff blocks under the air brakes. I had some extra photo etch chaff blocks so I added this missing detail myself.\nFinally I started to base coat everything using Gull gray on top, white bottom and red for the inside of the air brakes, tail wheel, and side scoop. It is now ready for the decals.\nThe ERA-3B Skywarrior has been finished. This was an interesting kit to build. Some of the things to watch for if you build this are some of the antennas are not included I the kit. The main landing gear can be challenging as noted before. The side APUs will need to be modified. If you mount them as the kit has them they sit way too close to the fuselage. I trimmed off the mount and used a styrene rod to move them a little farther from the fuselage. It is nice that they included the ELINT section, however you can barely see it thru the small window. The decals were very good. They laid down well and with a little decal solvent the underlying details came right in. The overall fit was pretty good with very little putty was needed. The one thing that was kind of a pain is that the injection marks on many parts were on the sides that show, especially on the landing gear bays. The photo etch covered most but there are a few that need to be addressed. Now I just need to wait until the shelter in place restrictions ease up so I can present it to the Chief.", "label": "No"}
+{"text": "Prototype: German Railroad, Inc. (DB AG) type DBpza 682.2 IC2 bi-level intermediate car, 2nd class, for long-distance service. Light gray long-distance service paint scheme with traffic red decorative striping, in the current IC design. Train route: IC 2045 from Cologne to Dresden Main Station. Car position number 4. The car looks as it did in 2020.\n- New prototypical train route: IC 2045 from Cologne to Dresden Main Station\n- Car position number 4\n- Factory-installed LED interior lighting\n- Interior lighting for the entire car consist can be controlled digitally using the decoder in the cab control car\nModel: The minimum radius for operation is 360 mm / 14-3/16\". There is a high entry above the trucks. The car has factory-installed LED interior lighting on both levels and current-conducting, operating close couplers. The car has lighted train destination displays on the sides. The interior lighting only works in conjunction with the bi-level cab control car and this lighting can be turned on and off digitally with the latter's decoder. A fixed, defined sequence of cars is assigned to do this. There are red transparent marker light inserts at the ends of the car. The car has prototypical Görlitz design trucks with separately applied folding steps.\nLength over the buffers 28.6 cm / 11-1/4\".", "label": "No"}
+{"text": "It's Jellikins v Teletubbies\nThe unsullied world of the BBC's Teletubbies is about to get a blast of grown-up cynicism with the arrival of Jellikins on rival GMTV.\nProduction company Winchester Entertainment has won the contract to sell the British version of Jellabies, the US children's programme that also starts later this year.\nJellikins' lift-off will take place at the end of July, with the first broadcast due on Saturday 31.\nThe Jellikins are a group of six characters who live in a 'Wibbly Wobbly land', where they learn educational and moral lessons such as looking after each other.\nWinchester chief executive Gary Smith said: 'There's a lot of work being done on making sure there's a story line and that the children learn something.'\nThe programme, to be narrated by Rik Mayall, will also involve plenty of songs, which it hopes will catch on among the nation's children, and a record has already been compiled, recorded by Universal.\nSmith admitted that the show will attempt to take on the stranglehold of the BBC's Teletubbies, which have a captive audience that goes beyond the shores of Britain's toddlers.\nThis will include a huge merchandising exercise to sell videos and toys, with the help of Just group.\nMost watched Money videos\n- A look at the new 2018 Mercedes-Benz A-Class A200 model\n- Take a look at the brand new Jaguar I-Pace prototype\n- Could these LED lights on crossings save lives on the road?\n- Jack Whitehall stars in Jaguar I-PACE promotional video\n- This is how Volvo's new V60 City Safety technology works\n- Jaguar I-Pace prototype smart cones driving test in Geneva\n- How to invest in retirement: The Investing Show Live\n- British car maker Morgan shows off new Aero GT in Geneva\n- Range Rover races through the 99-turns of the Tianmen Road\n- Will stock markets start to rise again?\n- Tips to invest your Isa - and why it is worth doing\n- New Jaguar I-Pace takes on Tesla in race against the clock", "label": "No"}
+{"text": "Mixer Direct's line of explosion proof dispersers have many available safety options. The Explosion Proof DP Container Safety Sensor Package shuts off disperser motor when the vessel disengages with Container Holder. The sensor is integrated directly into the VFD to ensure the safety of the operator. The safety package is setup and tested at the factory prior to shipment. Mixer Direct will provide a wiring diagram with shipment of this safety stop switch. The customer is responsible for providing suitable XP wiring onsite.\nHave a Question?\n- Item Number DPXSAFCNT", "label": "No"}
+{"text": "Click any title below to view the detail page where available.\n- 3V to 28V Operating Voltage Range\n- Active-Low OVPF, Active-Low ACOK, POK, OCF, NCF Flag LED Reading\n- OUT Power LED Reading\n- Proven PCB Layout\n- Fully Assembled and Tested\n- Smart Phones\nThe MAX20305/MAX20306 evaluation kit (EV kit) is a fully assembled and tested circuit board that demonstrates the MAX20305/MAX20306 low on-resistance, bidirectional overvoltage protector with current sense devices. The EV kit comes with the MAX20305EWV+ or MAX20306EWV+ installed. Please indicate the part number when ordering", "label": "No"}
+{"text": "This portable motor system features a max speed of 30,000 RPM and has a convenient digital RPM display on the control box. It also features a manual speed control dial to easily and precisely maintain and adjust the speed of the motor.\nThe unit is powered by a built-in rechargeable Li-ion battery that has a run time of up to 5 hours. The battery will fully re-charge after 3 hours.\nThe Portable Micro Motor System includes\n- Control Box with rechargeable battery\n- Handpiece with 3/32\" (2.35mm) collet\n- Handpiece Cradle\n- Spare pair of motor brushes", "label": "No"}
+{"text": "Gill, Santosh ready to power up their boats\nCS Santhosh and Gaurav Gill\nDouble Asia Pacific Rally champion Gaurav Gill and two-time Dakar Rally finisher CS Santosh are hoping not to find themselves all at sea when they slip behind the wheel of a racing boat for next weekend's maiden P1 Powerboat Indian Grand Prix of the Seas in Mumbai.\nPerfectly at ease cresting gravel-strewn jumps or racing up tall desert dunes, negotiating their way around a tight twisting course in the choppy waters off Marine Drive will present Gill and Santosh with a whole new challenge.\n\"I've been driving for so many years… the only thing which is common here is probably the steering wheel and the big gas pedal,\" Gill told reporters at a press conference to unveil the teams and crew participating in the event.\n\"It's something that I have to learn and a lot of things that I have to unlearn.\"\nOff-road motorcycle ace Santosh will have even more to unlearn. \"(Riding a) motorcycle is totally different from being in a chassis. But I have good instincts and I'll learn as much as I can,\" he said.\nGill and Santosh will be up against a multi-national crew of hardened boat racers, but the duo have spent time in the United Kingdom training with seven-time world champion Neil Holmes and should be well prepared.", "label": "No"}
+{"text": "If you want the absolute best bang for your buck in a new mountain bike, it’s hard to beat the offerings from Fezzari. The Utah-based consumer direct brand has bikes to fit every price point from $550 hardtails to XTR Di2-equipped trail bikes at $8,000.\nThe Timp Peak is Fezzari’s long-legged trail bike with 150mm of travel front and rear. It’s been in their lineup for years, but is receiving some slight geo tweaks in the form of a lower BB and ever so slightly slacker head tube angle. The frame is full carbon–front triangle, rear triangle, and rocker.\nBuilds start at $4,000 with your choice of suspension from either Fox or RockShox. And it’s the best they offer too, not the more budget conscious options. A SRAM X1 drivetrain, Guide RS brakes, and WTB KOM wheelset complete the rest of the build.\nIf you want the best of the best, the Timp Peak 2 is again offered with your choice of suspension, SRAM’s new X01 Eagle 1×12 drivetrain, Race Face cockpit, and Reynolds carbon wheels. And you get all that for $5,800. Sure that’s a lot of money, but holy shit that’s a dialed build!\nHidden Peak Carbon\nFor the XC racers out there, Fezzari is offering the Hidden Peak. It’s a full carbon bike with 100mm of suspension and aggressive geometry. Complete builds start at $2,900 with a RockShox Reba, SRAM GX drivetrain, SRAM Level brakes, and WTB wheels. Of course, you can get super blingy with Kashima-coated Fox suspension, a 1×11 Shimano XT drivetrain, and Reynolds carbon wheels for $5,000.", "label": "No"}
+{"text": "Recently, I was working with a customer on improving the roll-ability of a few moving dollies she had. There was nothing unique about her application. All she was looking for was a caster that provided a quieter and smoother roll. She found the general duty casters on our website and narrowed her selection down to a hard rubber caster vs. a soft rubber caster. The only question she had then was, what is the difference between the two? They are both rubber, right? The more I thought about this question, the more I realized how often I get asked this. In the sections below, I am going to highlight the differences between these two materials to help you better differentiate between the two.\nStarting with the hard rubber caster, as the name suggests, this caster has a harder wheel material. You will be able to tell the difference between the two by testing the wheel tread with your fingernail. If you cannot push your fingernail into the tread of the wheel, it is a hard rubber wheel (If you can push your fingernail in to the wheel tread, it is a soft rubber wheel). The hard rubber wheel has a solid hard rubber tread & core which offers high impact strength. Since the wheel tread is so hard, it will not compress under heavy loads providing for easy rolling and a increased weight capacity. These casters have a nylon bearing sleeve molded into the wheel core which again offers improved roll-ability. The warning against this wheel material is if you have a soft flooring surface, you should be careful because these can dent and scratch floor materials. These would not be recommended for surfaces such as hard wood, linoleum or terrazzo. Usually the wheel color on a hard rubber wheel is a dark grey.\nFor the soft rubber wheel, again as the name suggests, this wheel has a softer wheel tread. When testing the wheel tread with your fingernail, if you can push your fingernail into the tread of the wheel, it is a soft rubber wheel (If you cannot push your fingernail into the tread of the wheel, it is a hard rubber wheel). The soft rubber tread is molded over a hard rubber core. These wheels have a good shock absorbing cushioned ride, which offers floor protection and a quiet rolling operation. They come with a nylon bearing sleeve molded into the wheel core which offers improved roll-ability. In opposition to the hard rubber wheel, since the wheel tread is softer, it can compress under heavy weight loads. This would make them harder to push and it decreases the load capacity on these casters. Usually the wheel color is solid black.\nI hope this helps make it more clear as to when each of these wheel materials is the right fit. Both of them have their pros and cons and are very different from one another.\nThe Caster Guy", "label": "No"}
+{"text": "Fast and Friendly\nMike Davison which is owner of company, was very pleasant and efficient with my job I needed done. Mike gave me a reasonable estimate which was free. I would highly recommend Afforable Hauling to anyone in Hamilton or Mason area.\nOn-time service, up front rates, clean shiny trucks and friendly uniformed drivers. What more could you want from a full-service junk removal company...", "label": "No"}
+{"text": "kids ride on bulldozer sand digger excavator children play toddler.\n2 of 8 ride on excavator toy digger sand pit outdoor fun toddlers construction digging childrens yellow yd1007 o.\n2 in 1 ride on toy digger excavator grabber with helmet scooter amazon.\nkids excavator digger ride on toy truck.\nkids excavator digger ride on toy truck childrens yellow yd1007 with storage helmet.\nmusic digger truck vogue diamond educational assembling plastic toy excavator kids outdoor ride toys gift in vehicles from on.\ncat digger toy toys construction degree excavator ride metal on childrens yellow yd1007 d.\nkids sand box digger backhoe bucket sandbox toys ride on tractor shovel toy excavator home improvement salvage stores near me bac.\nexcavator also ride on digger and blue diamond brush cutter for mini childrens crane as well.\nnova big sand digger backhoe working crane steel kids ride on excavator beach toy with 4 sandbox heavy duty c.\nride on tractor excavator pedals free vehicle with an original super design manual digger.\ndigger scooter ride on excavator childrens yellow yd1007 pulling cart pretend play construction truck color may vary.\nkids ride on car digger excavator toy electric battery toddler outdoor play childrens crane.\nupgraded kids electric excavator ride on digger factory wholesale.\nnew ride on car kids digger pretend play excavator construction truck sand toy.\n2 in 1 ride on toy digger excavator grabber bulldozer with helmet childrens.\nride on digger excavator 5 of 9 toddlers kids 2 in 1 role play toy with hard hat childrens yellow yd.\nkids ride on toys battery powered excavator truck with front loader digger yellow scooter amazon r.\nyellow kids electric excavator digger toy small ride on scooter amazon sale e.\nheavy duty kid ride on sand digger digging excavator for toy.\n8 kids ride on sand digger outdoor sandbox toy heavy duty steel digging excavator crane with 4 wheels red childrens o.\nbaby excavator ri on digger pedal engineer ride childrens crane.\nwish music digger truck vogue diamond educational assembling plastic toy excavator kids baby outdoor ride toys gift on childrens.\nelectric remote control riding excavator digger car ride on.\nbest choice products ride on excavator digger scooter pulling cart pretend play construction truck childrens.\nfactory wholesale kids ride on truck upgraded electric excavator top quality toy digger childrens crane.\nride on playground sandbox digger backhoe sand excavator made childrens yellow yd1007.\njohn backhoe loader ride on tractor digger excavator scooter amazon top best toy diggers construction equipment.\nexcavator ride on digger childrens yellow yd1007.\nh m s remaining ride on digger excavator childrens crane kids car in yellow with helmet.", "label": "No"}
+{"text": "A matching solution for every door\nUsually, what brings lifts to a standstill is something simple. Since the car door is the most moved component of a lift, the source of trouble is most commonly found here.\nDepending on the type and usage, the life cycle of a lift car door is between 20 and 30 years. If a car door is in fact the trouble source, it is often just the drive with its mechanical components that is the problem.\nSo what is to be done if the car door drive is defective?\n1. Spare part procurement\n–Since there are no longer all that many door manufacturers left or the door may be the product of a competitor, finding spare parts is often a real problem.\n2. Replacement of the complete car door\n–This is often preferred, but is a kind of 'salami slice' modernisation.\n–Installing a complete car door is mechanically very complicated and associated with long delivery times. The high quality door leaves (often better than the new ones) are replaced unnecessarily at the same time. This is expensive and a waste of resources.\n–If the lift undergoes a complete modernisation a few years later, it cannot seriously be expected that the then \"used\" car door can be adopted. Especially since the lift builder has then made itself dependent on the car door manufacturer, given that in the event of modernisation it will also have to buy the landing doors from the latter.\n3. Renewal of the door drive\n–Here the only things that get replaced are what is needed for the safe operation of the lift.\n–Standstills are reduced to a minimum.\n–If the \"normal\" wearing parts are replaced at the same time, the customer has a car door with modern travel behaviour for the next life cycle.\nConversion solutions for all standard car doors\nLanger & Laumann Ingenieurbüro GmbH can quickly and reliably provide the right solution for precisely these problems. Conversion solutions for all standard car doors have been created in the course of many years of experience in close cooperation with fitters on building sites around the world.\nThanks to comprehensive warehouse stocks, modified conversion packages can be delivered to the building site desired within 24 hours. Since only the actual car door drive is replaced and no elaborate work on and in the car is incurred, the lift is quickly operational for the coming years in a future-secure manner.\nIdentification of old doors\nService is a major theme. Given the multitude of lift doors, it is not easy to find matching spare parts or modernisation solutions. Langer & Laumann have taken another route: after getting a picture of the lift door, the service department at Langer & Laumann produce a complete modernisation solution.\nImportant accessories like rollers, door guide rails and connection solutions are taken into consideration so that the shortest possible conversion time can lower the modernisation costs. If fitters have installation questions, these can be cleared up easily with a service employee of Langer & Laumann by telephone or per WhatsApp.\nFurther development of TSG\nFor many years Langer & Laumann has been working on further development of its own door control device (TSG) to modernise all existing lift doors. For example, the door control device has special functions for conversion; a drive can optionally be controlled by the TSG, which actuates the lock. The door control device not only offers very flexible adjustment options, but also has an extremely robust casing thanks to the striking blue metal housing in IP54 design.\nStrict attention was paid throughout to backward compatibility while developing the new generation. Drive motors of the first generation can be operated with the current fourth generation device. This compatibility means fitters can familiarise themselves very quickly.\nIt makes no difference to the door control device of Langer & Laumann whether the car doors are small and light or the large and wide ones of a cargo lift door. Adjustments are possible on the door control device via the jog wheel or conveniently and effortlessly with the optional web interface using a smartphone or tablet. Additional functions like an emergency power supply or CAN Open Lift are optionally available.", "label": "No"}
+{"text": "I am about to start buying parts for my conversion to fixed gear, but i need to know which parts i need to buy . I am planning on buying a new velocity rear wheel from IRO, how do i figure out exactly which size hub i will need...... 120, 126 or 130mm? besides a cog, lockring and chain do i honeslty need anything else? Can i recycle my current bottom bracket (which is relativley old) or should i look into purchasing a new one? If i do decide to purchase a new bottom bracket how do i figure out the size i need? MOst i have looked at have 68mm shell size, is that standard for an older road bike? And in terms of spindle length what is best... i have looked at everything from 107-111mm? Your help would be much appreciated. If there is anything else i am neglecting to remember please help me out.", "label": "No"}
+{"text": "To ensure optimum lateral stability even at low tire pressure, wider tires require correspondingly wide rims. However, to ensure that the result is a perfectly balanced rim, Shimano has carefully studied the complex relationship between tire width, rim width, tire pressure and lateral tire stability in the development of the GRX WH-RX810 wheels.\nThe 32 mm high full carbon rim offers not only enough space for 32 to 50 mm wide Tubeless tires, but also convinces with a balanced relationship between rim weight, durability and profile design. In combination with the reliable aluminum hub and aerodynamic stainless steel spokes, outstanding performance in Gravel use is guaranteed\nConstruction: Hookless, Tubeless Only\nWheel size: 28 inch (700C)\nOuter width: 30.7 mm / inner width: 25 mm / profile height: 32 mm", "label": "No"}
+{"text": "Blaze King by RED Engineering\nHigh production Blazeshield Machine\nThe Blaze King features adjustable blower speeds with digital readout, auto compensating electrical system for incoming voltage differences, 110 V water pump receptacle, audible start alarm, Standard DC Drive and off the shelf components, ease of mobility, fork lift access from all sides, pressure relief valve for packed hose and 45 dB Reduction Silencer to name a few. The Blaze King is available worldwide.\nManual & Parts\nNeed More Info?\nCall or fill out the form for more information.", "label": "No"}
+{"text": "I'd like some advice on what parts I will need to change to get my bike back on the road.\nBike is a GT Strike circa 1997/1998 with all RX-100 equipment\nHangar bit (bit that holds derailure snapped)\nBoth wheels buckled\nEverything else just scuffed\nFrame seems unaffected\nBrakes still work fine\nCrank/pedals/front derailure OK\nI'd like to get it back on the road only replacing the bits I need to.\nIs there a current generation drop-in replacement for the RX-100 rear derailure?\nIf I go for Shimano 105 derailure do I need to replace my RX-100 shifter and cassette as well?\nI'm an aircraft mechanic so can do the work myself, I'm just clueless on the different Shimano choices and which would be compatible with my current set-up.\nThanks in advance,", "label": "No"}
+{"text": "Outboard > Engine runs badly\nOften an outboard motor can starting and be running but still have problems with misfiring or lack of power etc. Select the symptoms that best describe your situation.\nThe engine stalls after starting\nRevs increase but boat doesn't accelerate\nThis is the situation where you open the throttle and the revs increase with the engine seeming to run strongly but the boat moves very slowly, or not at all.\nThe engine overheats when running\nLike all internal combustion engines, outboard motors need to be cooled when running. Select this option if your outboard is overheating. You will generally be notified that the engine is overheating by an audible alarm, steam from the telltale or stalling after getting hot.\nThe engine runs rough or misfires\nThe engine has a vacuum leak somewhere.\nWhen an engine has a vacuum leak extra air is being added after the fuel mixture thereby making the engine run lean.", "label": "No"}
+{"text": "|국가/구분||United States(US) Patent 등록|\n|미국특허분류(USC)||429/434; 429/435; 429/436; 244/058|\n|우선권정보||DE-10 2008 006 742 (2008-01-30)|\n|§371/§102 date||20101105 (20101105)|\n|발명자 / 주소|\n|출원인 / 주소|\n|대리인 / 주소||\n|인용정보||피인용 횟수 : 1 인용 특허 : 2|\nAn aircraft fuel cell system includes a fuel cell which has an oxidant inlet for supplying an oxygen-containing medium to the fuel cell. An oxidant supply line has a first end which is connected to the oxidant inlet of the fuel cell. A second end of the oxidant supply line is connectable to a used air outlet of a cabin of the aircraft. A heat exchanger is located in the oxidant supply line and thermally couples the oxygen-containing medium flowing through the oxidant supply line and a second medium flowing through an air conditioning process air line of ...\n1. An aircraft having a fuel cell system and an air conditioning unit, with the fuel cell system comprising: a fuel cell which has an oxidant inlet for supplying an oxygen-containing medium to the fuel cell,an oxidant supply line including a first end that is connected to the oxidant inlet of the fuel cell and including a second end that is connected to a used air outlet of a cabin of the aircraft, anda heat exchanger which is arranged in the oxidant supply line, wherein the heat exchanger thermally couples and transfers heat energy between the oxygen-co...", "label": "No"}
+{"text": "The Shangri-La Motel\nJoin Date:Joined: Mar 2012\nHeres something REALLY weird I just discovered...\nI am having the same problem as you with my ZL. I also have an Xperia T that will not turn on because the battery needs to also be replaced.\nI decided to do some messing around with the two devices since the battery connections are the same.\nWhat I did was plug my ZL battery into the T, and it worked perfectly. The phone booted up with no issue. It will even turn off and back on with no issue.\nBut when I plug it back into my ZL, it will not boot all the way up unless its plugged in.\nNow im wondering if the issue really is the battery, or something else....\nIm still going to order a replacement and see.\nIve ordered a replacement one for my T, for like 9$ on ebay.\nThe cheapest Ive found for the ZL, is about 23$. But I can buy one from within my country to avoid the long shipping delay for about 50$...", "label": "No"}
+{"text": "Choose one of the best road bikes under £3,000 or $3,000 and you can expect a great ride and high-quality spec. You’ll usually get a carbon frameset, although some of the best aluminium road bikes will come in this price range. The best steel road bikes and best titanium road bikes are also options if you’re looking for a different frame material, while some of the best women’s road bikes are also available at this price.\nIf you’re looking to spend less, we’ve also got guides to the best road bikes under £2,000 and best road bikes under £1,000, while you can also home in on the best endurance road bikes or browse our full library of road bike reviews if you’re looking for something else.\nNot sure what you’re looking for in a road bike? We can help you choose the right road bike for you…\nFinding the right bike for you\nThe best bikes in this category tend to be the all-rounders that can take a decent stab at everything. Think lightweight frames that offer all-day comfort for those sportive riders chasing fast times, but that will also hold their own on your local chain gang.\nThese are bikes targeted at the sweet spot between stiffness, comfort and weight, while keeping prices affordable for the enthusiast. And, for this price, you can expect to find bikes with the latest features, including thru-axles and quality hydraulic disc brakes in many cases.\nAlso, bear in mind that the type of riding the term ‘all-rounder’ encompasses is widening because the best gravel bikes are so versatile.\nWhichever bike you choose, the good news is if you’re spending this sort of money you’re unlikely to be disappointed with your purchase.\nYou could certainly spend a lot more on a bike if the urge takes you, but over £3,000 or $3,000 the margins for improvement get smaller and smaller, while the prices get a lot higher.\nSo-called ‘halo’ bikes from the major manufacturers now routinely exceed £10,000 / $10,000 but, unless you absolutely have to have the latest top-spec model, that kind of outlay is very hard to justify.\nThe best road bikes under £3,000 or $3,000 in 2023, as rated by our expert testers\nBoardman SLR 9.4 Disc\n- £2,700 as tested\n- Wireless SRAM Rival 12-speed drivetrain\n- Stiff yet pleasant ride\n- Discreet mudguard mounts and good clearance\nBoardman’s SLR offers a lot of kit for the money, with a full SRAM Rival groupset rarely seen at this price, along with Boardman’s top-spec and svelte C10 carbon frame.\nIt has a somewhat firm, racy ride that rewards an aggressive style while retaining enough comfort for long rides. Hidden mudguard mounts and sensible gearing lend year-round practicality.\nBoardman also makes a women’s-specific version of this unisex bike.\nFairlight Strael 3.0\n- £2,899 as tested\n- Fantastic, adaptable steel frame\n- Superb all-day comfort\nPitched as a four-season road bike, the steel-framed Strael can handle 36mm-wide tyres and mudguards. You can also fit a dynamo front hub with internal cable routing. There are custom-designed chainstays that help give the Strael exceptional ride quality.\nThe Strael is available in tall and regular options across the five different sizes, allowing a good fit for a broad range of riders, with each bike built to order.\nIt’s a comfortable all-day ride, but with some extra stiffness from the ovalised tube profiles, it handles and responds better than many round-tubed steel bikes.\nGiant Defy Advanced 0\n- £2,899 / $4,100 as tested\n- Great ride comfort\n- Quality spec, including electronic shifting and wide tubeless tyres\nThe Giant Defy is the brand’s endurance bike and, in this spec, it’s not only relatively affordable but offers a great ride that’s not too upright, with Giant’s D-shaped carbon seatpost adding compliance at the saddle.\nThe Defy is really well specced too, with a SRAM Rival eTap AXS electronic groupset and tubeless 32mm Giant Gavia Fondo 1 tyres on Giant’s own lightweight wheels, soaking up road imperfections. We found it hard to fault.\nCannondale CAAD13 Disc 105\n- £2,250 / $2,300 / AU$3,499 / €2,299 as tested\n- Thrilling ride\n- Questionable value\nThe Cannondale CAAD13 incorporates enhancements from the brand’s premium SuperSix EVO carbon racer. Seatstays are dropped, tyre clearance increased to 30mm and aerodynamics are improved.\nThe groupset is Shimano 105 with Cannondale cranks, and the brand supplies the finishing kit and wheels too. Mudguard mounts are a practical bonus.\nOnce you start riding, the CAAD13’s assured handling, decent climbing and zingy ride assuage concerns about value. Still, it’s £500 less than the carbon-framed and equivalent-specced SuperSix EVO and a better bet than other carbon bikes.\nCanyon Endurace CF 7 eTap\n- £2,849 / $3,999 / AU$4,649 / €2,999 as tested\n- Comfortable ride with plenty of tyre clearance\n- Great shifting from the SRAM 12-speed wireless groupset\nCanyon has updated the Endurace frameset for 2022 and the mix of light weight and comfort, a quality spec and the SRAM Rival eTap AXS wireless shifting make it a compelling choice. Rival gives 12 speeds with a sub-1:1 lowest ratio of 35x36t and a top end that’s slightly higher than a 50x11t.\nThere’s clearance for 35mm tyres, although we were disappointed that the 30mm rubber fitted wasn’t tubeless-compatible. There are no mudguard mounts either.\nHowever, the ride is first-rate: speedy with great handling, while the combination of a quality Fizik saddle and Canyon’s VCLR seatpost make for great comfort. The Endurace is available in eight sizes too, so it should fit a wide range of riders.\nCube Attain GTC SL\n- £2,499 / €2,199 as tested\n- Frame is compliant but sporty\n- Quality spec with Ultegra shifting and Fulcrum wheels\nDesigned with extra compliance from its fork and seatstays, the Cube Attain GTC SL nevertheless offers the responsiveness for effective climbing and fast descents.\nCube bikes usually represent good value and this Attain spec comes with Shimano Ultegra and 28mm tyres on Fulcrum wheels, although we reckon a wheel swap would really bring out the bike’s best performance. The Newmen cockpit is comfortable but stiff.\nFocus Izalco Max Disc 8.7\n- £2,649 as tested\n- Aero redesign of a lightweight racer\n- Shimano 105 disc groupset, plus carbon wheels\nThe Focus Izalco Max adds aero to its predecessors’ low weight, and its frame features dropped stays and truncated aerofoil tube profiles.\nFocus gives you a full 105 hydraulic groupset and 45mm-deep Alexrims carbon clinchers.\nThe Izalco isn’t the lightest bike in its class, but it’s no heavyweight and it offers a racy ride. The only real niggle we had with the bike was an odd whistling noise present at normal riding speeds.\n- £850 frameset, £2,250 as tested\n- Racy aluminium with all-weather capability\nKinesis has long been a go-to for practical everyday bikes designed for the realities of UK riding. The RTD is no exception, offering racy handling plus disc brakes and the ability to fit full mudguards.\nLike other bikes from the brand, the RTD is sold as a frameset, so you can build it up to suit your budget.\nLatest deals for the Kinesis RTD\nMerida Reacto 4000\n- £2,250 / AU$3,499 as tested\n- Aero looks and performance\n- Wheels and tyres need an upgrade\nThe Merida Reacto 4000 gives you aero bike performance without the price tag. The cheapest Reacto in the range, it’s equipped with Shimano 105 and uses lower-spec carbon than the pro-level models.\nThe frame weighs around 200g more than those more expensive bikes, but Merida says it has exactly the same ride characteristics and aerodynamics.\nThere’s hidden cabling from the cockpit and room for 30mm tyres. Nice touches include a built-in rear light in the seatpost and a multi-tool concealed under the saddle. You should aim to upgrade the shallow wheels and low-spec tyres to bring out the bike’s potential though.\nWe’ve also reviewed the slightly more expensive Merida Reacto 6000, if you fancy a spec upgrade to Ultegra.\nPlanet X Pro Carbon Ultegra\n- £2,600 as tested\n- Staggering value\n- Speed demon\nWith aggressive geometry enabling nimble handling and a firm, lightweight carbon frame with aero characteristics, the Planet X Pro Carbon is built for speed.\nThis doesn’t mean the bike is uncomfortable on poorly surfaced roads, because the Pro Carbon has clearance for up to 30mm tyres.\nAvailable as a frameset or entire bike from Planet X, the Pro Carbon is high quality at almost incomprehensibly low cost.\nRibble Endurance SL Ultegra Disc\n- £2,709 as tested\n- Aero bike with a juicy spec\n- Mudguard mounts add practicality\nDespite the name, the Endurance SL is a racy machine and one that’s very on-trend, with aero tube profiles throughout, dropped seatstays and an integrated aero cockpit.\nRibble gives you a full Shimano Ultegra groupset at this price, but a range of alternative builds starting at around £1,600 are also available.\nLatest Deals for the Ribble Endurance SL\nScott Addict 30\n- £2,349 / $3,300 / €2,599 / AU$ 4,900 as tested\n- Large 35mm tyre clearance\n- Racy performance despite its endurance badging\nThe Scott Addict is designed for endurance rides and sits below the pro-level Addict RC in Scott’s bike range. It shares the RC’s aero tube profiling, although its carbon make-up is designed to be more compliant than the RC’s.\nThere’s clearance for 35mm tyres and you can mount mudguards. Full internal cable and hose routing makes for a clean front-end and the size 56’s 8.3kg is good for the bike’s price and Shimano 105 mechanical spec.\nThe taut frame leads to lively performance, while the long wheelbase keeps the handling calm and predictable despite the steep head tube angle, which makes fast cornering sharp and accurate.\nScott’s Syncros-branded finishing kit works well, although its wheels are a little narrow by today’s standards for the 32mm Schwalbe tyres and aren’t tubeless-compatible.\nVitus Vitesse Evo CR Rival AXS\n- £3,200 as tested\n- Whippy ride\n- Low weight\n- Staggering value\nThe Vitus Vitesse Evo CR Rival AXS seems to be worth more than the sum of its parts. A light frame and fork, SRAM Rival AXS groupset, high-end alloy wheels and decent tyres round off a remarkable build for the money.\nAggressive geometry turns the Vitus Vitesse Evo CR Rival AXS into a fast, agile racer that doesn’t abandon comfort. Since it doesn’t have mudguard mounts, winter road riding might be all the bike isn’t suitable for.\nVitus ZX-1 EVO 105\n- £2,800 as tested\n- Goes like the wind\n- Superb value\nThe Vitus ZX-1 EVO frame is now aero-optimised. Vitus claims the design, which mimics the geometry of the Vitesse Evo race bike, reduces drag by a fifth compared with the previous model.\nWhichever spec you go for, the Vitus ZX-1 EVO has fully integrated cable routing. Paired with deep-section carbon wheels and an aero bar and stem, these propel the ZX-1 to high speed at stunningly low cost.\nUnlike many aero road bikes, the ZX-1 manoeuvres more like a racer. The ride is by no means plush, but far less severe than you’d expect from such an aero bike.\nAll City Zig-Zag\n- £2,750 / $3,199 as tested\n- Lovely looks and top quality\n- On the expensive side\nThe All-City Zig Zag combines an old-school steel frame with the best of modern tech, such as a carbon fork, hydraulic disc brakes, tubeless wheels and tyres as stock, and clearance for up to 35mm tyres.\nAll things considered, it’s great fun to ride. It handles very confidently and feels faster than its 9.71kg weight and steel tubing would suggest.\nThere’s no denying All-City’s wonderfully stylish steel bikes are a little pricier and heavier than your equivalent carbon road bike, but we’d also argue the Zig Zag has a lot more character.\nBasso Venta Disc 105\n- £2,199 / $3,060 / €1,967 as tested\n- Racy Italian frame with quite a firm ride\n- Plenty of tyre clearance, although the wheels are heavy\nPriced competitively for an Italian race bike, the Basso Venta Disc 105 has clean, classy lines, aero tube profiles and a more endurance ride position than Basso’s Diamante. The frame geometry retains a racy edge and the ride quality is quite firm, although not uncomfortable.\nThe 105 spec comes with 28mm tyres, but you can increase that if you want, while the stock wheels weigh over 2kg, so we’d expect a lighter set of hoops to liven up the ride considerably.\n- £2,750 / $3,415 / AU$4,400 / €2,850 as tested\n- Steel frame and big-tyred 650b wheels\n- Superb comfort and grip over sketchy surfaces\nA steel frame and 650b wheels with 47mm tyres make the Audax something different from most endurance road bikes. It’s not a gravel bike though and feels fast and lively on tarmac, coping well with typical rough road surfaces and hurtling down descents.\nWe rated the drivetrain, which is a mix of Shimano 105, with a 48/32t chainset and an 11-34t cassette, paired with an Ultegra RX clutched rear derailleur. The saddle was a bit hard and narrow for our tastes though.\nCannondale SuperSix EVO Carbon 105\n- £2,750 / $4,250 / AU$4,599 / €3,399 as tested\n- Superb, smooth ride quality with responsive handling\n- The package value has been diminished by price increases\nA cheaper version of Cannondale’s pro-level all-rounder race bike made with lower-spec carbon fibre, the SuperSix EVO Carbon 105 boasts aerodynamic Kammtail tube profiles and dropped seatstays for great ride quality and smoothness.\nThe groupset is Shimano 105, but with a Cannondale 52/36t chainset with FSA chainrings. It works well. Better wheels and tyres would bring out the frame’s ride qualities though and with recent price increases we questioned the value.\nFelt FR Advanced 105 Disc\n- £2,249 / $3,499 / €2,749 as tested\n- Fast, agile handling and climbing\n- 28mm tyre clearance is a little narrow by current standards\nBilled as a fast all-rounder, the Felt FR Advanced Disc is stiff and agile, with racy geometry figures. The frame has been around since 2017, but its features still rival modern bikes, although at 28mm its clearance is not as large as newer entrants.\nWe rated the stiff frame’s climbing, with the bike’s 52/36t chainset and 11-30t cassette offering enough range for steep hills. There’s a bit of road buzz at the front on poor surfaces, although the rear of the bike feels comfortable and compliant.\nKinesis Aithein Disc\n- £2,680 as tested\n- Fast and firm ride\n- Few concessions to comfort\nThe Kinesis Aithein Disc frameset is a racer’s dream at a good price. The stiff alloy frame responds quickly to accelerations, suiting fast-paced club runs and competitive riding.\nAlthough the ride may be too uncompromising for some, the pared-back Aithein frame is not meant to deliver all-day comfort. It excels at what it’s designed to do – hammering along the flat, and up and down climbs.\nYou can build up the frameset as you wish. The Ultegra-equipped build we reviewed costs £2,680.\nLapierre Xelius SL Disc 5.0\n- £2,549 / €2,699 as tested\n- Comfortable ride and aero tube profiles\n- Livelier handling than the headline weight would suggest\nLapierre has added aero tube profiles to its Xelius lightweight bike, with the seatstays fixed to the top tube rather than the seat tube for extra flex, leading to a really smooth ride quality.\nThe geometry is quite aggressive, long and low, but at this spec the Xelius isn’t particularly light at 8.8kg. It feels more lively than this headline number would suggest though, thanks to lively handling and impressive bottom bracket stiffness.\nOrro Venturi Evo 105\n- £2,100 / $2,667 / €2,457 as tested\n- Aero-focused bike with racy riding position\n- Good value and clearance for 28mm tyres\nOrro might not yet have the history or social status of an established WorldTour brand, but it more than makes up for that by offering fast, smooth bikes that represent excellent value for money.\nIf you want a racy aero bike that delivers a smooth ride, even on British roads, and is rapid on undulating courses, then Orro’s Venturi Evo 105 could be right up your street.\nSpecialized Allez Sprint Comp\n- £2,650 / $3,000 / AU$4,200 / €3,500 as tested\n- Classy aluminium frame\n- Quality finishing kit\n- Mediocre wheels and tyres\nThe Specialized Allez Sprint Comp shows a superbike can still be alloy. Geometry and tube shapes are identical to the Tarmac SL7, the brand’s do-it-all road bike. The frame’s responsiveness could lead you to believe you’re riding a carbon bike, albeit a heavy one.\nValue is iffy though. The stock wheels and tyres don’t harness the frameset, one of the best of its material type. A host of lighter and better-specced carbon road bikes are similarly priced or cheaper.", "label": "No"}
+{"text": "A cool little mouse coaster, with an innovative lift feature at the start. Dash through a mock Swiss village, but hold on - things can get kinda rough.\nThis ride is surprisingly fun. It is well themed with plenty of animatronics, especially in the queue. The lift is clever and the ride is thrilling.", "label": "No"}
+{"text": "Every year, Scott carves out a week in the summer to gather media, reps and dealers to show off their latest offerings. This year’s Scott Week went down at Deer Valley Resort in Park City, Utah, and the focus was on the Switzerland-based company’s recently announced plus-size offering, which includes three models: the Genius Plus, Genius LT Plus and the Scale Plus.\nScott Genius LT Plus\nThe Genius LT Plus is an eye-catching machine; its 27.5-plus tires and 160 millimeters of travel give it a goliath stature. Scott initially planned to exclude this bike from its U.S. offering, but received so much positive internal feedback that it seemed silly to keep it from the American market. The non-plus Genius LT has been in Scott’s line for several years now, and features 27.5 hoops and 170 millimeters of travel–10 millimeters more than its plus-sized twin. After clocking in my laps on the LT Plus, I hopped on the normal LT to see how the plus-size wheels affected the ride. Read on for my impressions.\nIf this is the first you’re hearing about plus-size bikes, you should check out our in-depth Blueprint feature.\nI’m not going to go too deep into the build on these bikes, since this test was really about seeing how two similar bikes handle with the different wheel standards. I tested the top-end Genius LT Plus Tuned and the middle-of-the-road Genius LT 710. Both bikes have carbon front triangles and alloy rear ends. There are some significant differences in componentry between the two models: The LT Plus Tuned is specced with an 11-speed drivetrain, as opposed to the LT 710’s 2×10 setup, and also features higher-end suspension. But my impressions here really don’t have anything to do with componentry. More relevant are the close similarities in the bikes’ geometry and suspension kinematics. Both bikes feature adjustable geometry via a chip in the shock mount, which I kept in the ‘High’ setting.\nGenius LT Plus Geometry (click to expand):\nThe Genius LT 710 comes with “normal-sized” tires and a mid-tier component spec. You can view its geometry here.\nDeer Valley’s bike park is riddled with tight old-school corners, and a surprising number have drops into them or in them. Despite the bikes’ geometric similarities, the LT Plus proved more of a handful in these situations. I had an easier time placing the Genius LT where I wanted and carried more speed through the awkward corners. Straight-and-chundery lines were easily dispatched by the trail-muting 2.8″ Schwalbe Nobby Nic tires on the LT Plus, while the non-plus LT required more attention and braking finesse. There was a certain vagueness to the LT Plus, which probably resulted from a combination of the 2.8-inch tires and the 160 millimeters of travel that stood between me and the trail feedback I’m used to.\nThe bigger tired Genius displayed seemingly limitless traction on off-cambers, but felt unnerving on gravelly, loose-over-hard surfaces where the regular LT seemed to cut into the loose and hold it’s line. I think the larger tires were rolling on top of the loose rocks and not pushing them out of the way to find the traction that the narrower rubber could get to. On good dirt, though, the plus-sized rubber gave me the confidence to lean the bike over quite a bit more than I felt comfortable with on the normal LT. When it came to jumping, the LT Plus wasn’t as flickable off lips as the Genius LT. But I was pleasantly surprised to not feel any unnerving tire roll when landing or taking off on the big tires, which I ran with about 14 PSI in the rear and 13 in the front.\nMy sense is that Scott’s suspension is skewed towards climbing, an assertion supported by the fact that I never felt the need to hit the bar-mounted dual-lockout lever on either bike. There wasn't a shocking increase in rolling resistance with the 2.8\" plus-size tires, and the rolling efficiency of the larger diameter hoops seemed to make up for what added resistance there was. Technical climbs that didn’t require rapid directional changes were cake on the LT Plus, with the big wheels rolling and gripping on even the most poorly chosen lines. The normal Genius LT climbs extremely well for a bike with 170 millimeters of travel, but couldn’t compete with the 160-mil LT Plus when it came to power-smashing technical uphills.\nAs far as I’m concerned, this is the most important element in any review. Hands down, I had a better time on the normal Genius LT. But let me qualify that a bit: I’ve spent years riding bikes with tires that perform like the ones on the Genius LT, so it’s arguable that my riding style hasn’t adjusted to make the most out of the bigger rubber. That’s a fair argument, but the thing I enjoyed most about the non-plus LT was that it was more flickable and playful than the LT Plus. The bigger-tired Genius wasn’t as enthusiastic about my efforts to make it scoot, pop and scuttle across the trail the way my favorite bikes do. Of course, “maneuverability” is not central to every rider’s definition of fun, and the larger tires will certainly suit riders who prefer to hold a straight line and let the bike mow down everything in it’s path. Plus-size will also likely have less-confident riders having more fun simply because of the stability and traction offered by the big tires.\nConclusions and Lingering Questions\nScott isn’t making the argument that plus-size bikes are better in every way. The company’s pitch is that each wheel size offers unique advantages, and that plus-size’s advantage is “traction and control.” Generally speaking, I agree. The LT Plus had a lot of traction on hand over most surfaces.\nThe “control” part gets a bit murky. What kind of control are we talking about here? If control is the ability to maneuver the bike effectively at a given speed or in a particular situation, I would have to disagree. In my experience, the Genius with the 2.35″ tires was, across the board, more effectively maneuverable than the one with the 2.8s. When it came to riding chunky, point-and-shoot trail features, though, the plus-size bike had an unquestionable confidence about it. What’s “confidence?” Well, when it comes to riding one might define it as the feeling of control. If plus-size delivers that feeling of control–regardless of whether or not it actually is control–and gives less-confident riders what they need to enjoy the trail, then I’m all for it.\nThe Scott Genius LT Plus will come in three different build options, priced at $4200, $5300 and the $8000 “Tuned” version ridden in this test.", "label": "No"}
+{"text": "Richard Mille as created the RM 12-01 Tourbillon, presented for the first time at the third annual, \"The Bridge, Presented by Richard Mille.\"\nRichard Mille launches the RM 25-01 Tourbillon Adventure—a collaboration with Sylvester Stallone, priced at $983,000 and limited to only 20 pieces.\nLuxury Swiss watchmaker ZENITH debuts its new Defy Classic collection that launched in Baselworld earlier this year, in retailers and boutiques worldwide.\nWorld-renowned street artist Shepard Fairey and Swiss luxury watchmaker Hublot create a one-of-a-kind collaboration, the Big Bang Meca-10 Shepard Fairey.\nLuxury watchmaker Richard Mille enters the high-end jewelry watchmaking space with its new women's RM 71-01 Automatic Tourbillon Talisman.\nAt the Geneva Motor Show, Richard Mille launched an exclusive, 500-piece RM 11-03 McLaren watch with luxury sports car manufacturer McLaren.", "label": "No"}
+{"text": "Kitchen Aid, Replacement Parts For Kitchenaid Mixer Kitchenaid Mixer Speed Control Knob White House Bread Mirror Kitchen Mirror: inspiring replacement parts for kitchenaid mixer\nPublished at December 23rd, 2017 14:21:37 PM by Alodie\nLabelled as amazon kitchenaid blender object also kitchenaid blender parts discussion also kitchenaid parts discussion, order kitchenaid replacement parts subject or kitchenaid mixer parts list subject and kitchenaid mixer parts diagram object along with Kitchen Aid, So don't forget to check out the main article in inspiring replacement parts for kitchenaid mixer\n© 2018 sartconference.com. Reproduction without explicit permission is prohibited. All Rights Reserved.", "label": "No"}
+{"text": "OUR WORK GALLERY\nReplacement MPL mechanism and Euro Cylinder\nKey Safe - allowing Care Worker access\nYale Keyfree (discontinued) Smartlock repaired and good for a few more years\nNew chrome number from the Sweet range fitted\nHigh security cylinder fitted to the garage using the same key as the front door.\nNew cylinder and \"Sweet\" numeral.\nDiscounts currently available on all Yale Smart Living products, book now.", "label": "No"}
+{"text": "Boundary Layer Scoop for the Enhancement of Coanda Effect Flow Deflection Over a Wing/Flap Surface.\nDEPARTMENT OF THE AIR FORCE WASHINGTON D C\nPagination or Media Count:\nA STOL aircraft having turbojet or torbofan engines mounted above and forward of the wing whereby the engine exhaust gases flow over and, by the Coanda effect, attach to the upper surfaces of the wing and a downwardly curved extendible flap to produce a downwardly turned exhaust flow having a large vertical component of thrust. Premature separation of the exhaust flow from the wing or flap due to reduced velocity in the boundary layer of the flow, which would result in decreased turning of the exhaust gases and a reduced vertical thrust componnent, is prevented by a boundary layer scoop extending across the exhaust flow, in an area just prior to where the exhaust flow would separate from the wing or flap, for removing the boundary layer gases and discharging them beneath the wing. Author\n- Fluid Mechanics\n- Combustion and Ignition", "label": "No"}
+{"text": "|Allis Chalmers||Avery||Bobcat||Case David Brown||Caterpillar||Cockshutt||Deutz||Euclid||Ford||International Farmall|\n|John Deere||Kubota||Massey Ferguson||Minneapolis Moline||Mitsubishi Satoh||New Holland||Oliver||White||Zetor||Miscellaneous (OTHER)|\n|| SSB Farm Tractor Parts, Manuals & Antique Tractors||| Aftermarket Farm Tractor Parts||| Service & Repair Farm Tractor Manuals ||\n|| Tractor Implements||| Tractor Seats||| Trailer Parts||| Tractor Loaders||| PTO Generators||| Rear View Backup Camera ||\n|| Pedal Toy Tractors||| Tractor Books||| Tractor Data / Info / Specs||| Tractor Blog||| Antique Tractors History||| Related Sites||| Rustic Home ||\n|How much is your farm tractor worth? Find resale prices for tractors built from 1939 through today, with complete specifications and serial numbers. Save 15% on our Official Tractor Blue Book sale!|\nSearch This Message Board:\n3010 JD power steering\n|Steve Dempsey||After my tractor sets for a few days, it has no hydralic resistance in the steering wheel. It seems like hydralic oil is draining back into the reservoir. After starting tractor, it takes a minute or so before I have power steering. Any suggestions on where to start looking for the problem.\n|William||It could be the stroke control valve in the hydraulic pump, if my memory is correct. I would check in on that first.\n|Bill||There's a check valve in the transmission case that keeps the oil from draining back. I'm guessing the spring is weak or broken. The quickest and cheapest fix is to install an inline check valve for probably under $10. I can give you the part numbers and tell you how to do it if you're interested. You may have to take the fitting to a machine shop to have the fitting drilled and tapped.\nPost a Followup", "label": "No"}
+{"text": "No, Your homeowners insurance does not cover vehicle damage. That's what auto insurance is for.\nYour homeowners insurance should cover damage to your sprinkler system if the cause of the damage is covered by your homeowners insurance policy such as fire, lightning, freezing of pipes, etc. Homeowners insurance is not a maintenance policy and will not cover mechanical failure of your system.\nNo. This is not what homeowners insurance is for. Homeowners insurance is to pay for physical damage to your home and contents.\nNO, Homeowners insurance does not cover automobiles.\nNo. Homeowners Insurance does not cover Hail damage to an Automobile.Hail damage to an automobile is covered by the vehicles Auto insurance policy. Vehicles are not scheduled property on a homeowners policy.\nNo, unfortunately it does not. Your homeowners insurance covers damage to your home. Your auto insurance covers damage to your car.\nno it has nothing to do with your grill cause its homeowners insurance.\n\"Flood Insurance\" will cover damage resulting from a Flood. Homeowners Insurance will not.\nYes, most homeowners insurance will cover this type of damage. You need to read your specific policy for exclusions for water damage.", "label": "No"}
+{"text": "These Citabria gear legs are made out of 4130 Chromoly and closely resemble our PA-18 gear legs.\n• Original Citabria 8 hole axle flange.\n• Widens your front gear stance 6” and increases your side to side stability.\n• Total system is 3 lbs. lighter.\n• No oil is required for the suspension unlike the original oleo system. Easier to maintain.\n• More travel in the suspension than the stock system.\n• Reduces the G forces exhibited on the fuselage by 50%\n• 31.5 lbs. for 2 gear legs and 2 suspensions\nShock length is determined as follows:\nIf aircraft has 4.875” wide cabane vee plate use long shock option.\nIf airplane has 8.35” wide cabane vee plate use short shock option.\nEach side uses 2 bungees.\nCall to order bungees and suspension covers.", "label": "No"}
+{"text": "[RFI] Powerline NOISE -- no radio!\nka5s at earthlink.net\nSun Apr 18 10:12:59 EDT 2004\nA couple of news articles about power line noise -- no radio needed -- and\nwhat's being done about THAT.\nOctober 2003 headline:\nResidents abuzz over power line\nHigh-voltage noise is driving neighbors nuts\nApril 2004 headline:\nPower line buzz is quieter, but still bothers residents\nMore information about the RFI", "label": "No"}
+{"text": "Codemasters F1 2015\nCompare Codemasters F1 2015 prices from 1 retailers\nRace like a champion in F1 2015 and get closer than ever before to the experience of racing in the world’s most glamorous, exciting and prestigious motorsport. F1 2015 puts you in the heart of the action with a stunning new game engine that recreates the blisteringly fast and highly responsive racing cars of Formula One and all new broadcast presentation that immerses you in the unique race day atmosphere. F1 2015 is the official videogame of the 2015 FIA Formula One World Championship and also fully playable 2014 FIA Formula One World Championship bonus content. Compete as your favorite Formula One star in the new Championship Season and push yourself to the limit in the challenging Pro Season mode. Hone your skills in the new Online Practice Session, and then challenge your friends and racing rivals from across the world in Online Multiplayer.\nHere's some more information about this product\nThe Codemasters F1 2015 PC Game was added to the PC Games category in November 2017.\nThe lowest price GetPrice has found for the Codemasters F1 2015 PC Game in Australia is $18.50 from Green Man Gaming.\nOther merchants who stock it are Green Man Gaming.\nGetPrice provides impartial price comparison information to help you get the best deals year-round and Australia-wide.", "label": "No"}
+{"text": "Rob started building wheels over 35 years ago and has constantly kept up with developing trends. His philosophy has been translated into hundreds of wheels custom built for both the pleasure and racing cyclist.\nThe basic theory of a successful wheel build is to keep the hub as the central weighted area whereas the rim should contain the lightest possible components. Eg one might buy lightweight titanium spokes, but brass nipples will have to be used which will add weight to the outer rim, a factor one must avoid.\nAn interesting time line\nLong ago, British wheel builders favoured a 32 spoke front wheel with a 40 spoke rear wheel, while other countries preferred 36 spokes on both wheels. Racing wheels, however, tended to use 32 spokes front and rear.\nAs time went by, it became “fashionable” to build all wheels with 32 spokes. All kinds of trends set in, from twisting spokes “for extra stiffness” to the using the flattened aero dynamic spokes.\nAnd nowadays, spokes are either straight gauge, double butted or triple butted, the butted spokes having a certain amount of elasticity when built into a correctly tensioned wheel. This prevents rims from cracking and ensures maximum durability. Although the 32/32 spoke combination has become the industrial standard, wheels are also built with a lesser number of spokes.\nThe fewer the spokes, the stronger the rim needs to be.\nA large variety of materials is used in spoke making, some do have their draw backs\nLoose spokes allow the hub to twist inside the wheel & the tightest spokes tend to break.", "label": "No"}
+{"text": "R5 Turbo 2\nerrors on ipb forums. Cannot post.\nJan 04 2011 12:11 AM\nIt posts, jsut go back to the index and go back to th topic that way.\nJan 04 2011 10:40 AM\nI had this a while back, call Jason, he fixed it in 2 sec :)\nJan 04 2011 11:39 AM", "label": "No"}
+{"text": "This weekend we were luck to have unseasonably warm weather with the highs in the 60s both Saturday and Sunday. Saturday was finally a time to get the Hungry* road guys together for a very solid ride. We set off in Kentucky for a 90 mile ride to butler with relentless hills and even more attacks! The ride proved to be very hard and is just what I wanted. Some people worry about going too hard this time of year but i never see anything wrong with an occasional hammer fest even if during the winter.\nSunday was supposed to rain but overnight the chance of rain disappeared. So Jamie and I joined the whole Hungry* crew for an awesome ride. This ride turned out to be great after the hard 90 miles of Saturday. Lots of great company made the miles fly by and its always great to get in a bigger group ride.\nThe Butler market stop and the ride with a million small hills\nSundays ride with the whole hungry crew", "label": "No"}
+{"text": "Barclay expected to return to Asia and Middle East two years after leaving the region\nBarclay's high-end bank is eyeing a return to Asia and the Middle East less than two years after it sold out of the region.\nThe lender sold its Asian private bank – which targets wealthy customers – to Singapore’s Overseas-Chinese Banking Corporation in 2016 as part of chief executive Jes Staley’s plan to focus on the US and UK.\nBut with the geographical market worth an estimated £3.7 trillion thanks to a surge in the newly-enriched middle classes, senior figures are reportedly plotting to return.\nBarclay is expected to capitalise on £3.7 trillion market in Asia\nEuropean and US lenders are rushing to grab a share of the increasingly affluent market in Asia, with Credit Suisse, UBS and Citigroup all vying for clients.\nMost watched Money videos\n- Lord Blunkett 'never envisaged' disabled Child Trust Fund issues\n- BMW under fire for latest 'woke' promo video\n- Bentley blower is back! British marque completes reborn 1920s racer\n- The all new Toyota Mirai 2021 hydrogen fuel cell car\n- UK's first garage for charging electric vehicles opens in Braintree\n- Renault 5 EV prototype will look like the 1980s rally car\n- Electric cars could reap benefits from new green number plates\n- We've had the vaccine rally, so what next for shares?\n- Chinese Nio ET7 electric family car costing £60,000\n- All-New Dacia Sandero supermini will hit UK market later this year\n- JCB's new vehicle designed to eradicate potholes in record time\n- 'UK shares can do well when the world reopens': Tom Becket", "label": "No"}
+{"text": "Originally Posted by manyboats\nYou say ... \"diamater should be 32\" and 28\" pitch\".\nThat would be like your boat w a 500hp engine and a 60\" prop.\nYou can't prop Breadbasket for the engine because she can only use a small fraction of her power. Breadbasket needs to be propped to her hull. No need for more than 20\" in diameter as long as enough pitch can be had to propel the boat easily at hull speed and a bit more (7 knots max). Probably will need over 20\" dia to have a prop that will advance through the water at about 8 or 9 knots ... with the proper amount of slip and enough thrust to push the boat (15 to 20hp).\nAgree... If 40 or 50 hp were used, there would be no need of that diameter to absorb the power and 20 or 22\" would be enough. So if the engine were derated to the necessary power + reserve he could run the numbers and get the proper wheel assuming\nhe is willing to change transmissions. As it stands now, if that smaller wheel were adopted, the engine could\noverspeed so needs an unnessarily large and iinefficient (friction) prop. That 50 hp will be developed at less than 1/2 current rpm so pehaps 1.5 or 2:1 transmission would be required.", "label": "No"}
+{"text": "Title: HO Slot Car Racing Description: Dedicated to HO Slot Car racing, collecting, restoration, track design, electronics and software. hoslotcarracing.com is.Kids and parents can race 1:32 scale slot cars around a huge 50 meter track using handheld wireless remote controllers. The digital system provides drivers with the.129 pieces of Tyco Speedways slot car racing ho scale track - Tyco Loc track | Toys. Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands.\nAlaska Drone Racing Leauge; Blog. Scalextric Micro Hyper Car Set. $69.99. Add to cart More. Slot.it Porsche 956LH No.34 Le Mans 1984.Use the following hardworking furniture and storage items to accommodate all of the kids in the room.SLOT-CAR CENTRAL is now OPEN!!!. Slot-car racing is BACK at the Lake Price: $0.00. Join LOC now! Forgot your password? Here.\nVintageToys.com - HO Scale Slot Cars For Sale\nRacing Dura-Lock Slot Track Sections - Walmart.com\nWhat is Slot Car Racing?. Top local racer will represent Hong Kong in World Finals in Germany! read more. Carrera Slot Racing on. Site map.Sport Bug 1:64 Scale Slot Car Racing Track Ho Scale New And Impro.CHOCKING HAZARD - CONTAINS SMALL PARTS - NOT FOR CHILDREN UNDER. 3 read more.\nScalextric Track & Slot Car Boxed Sets | eBayAuto Electronics Car DVD & Video Car Stereos Car Speakers & Subwoofers Power Inverters Dash Cams. Racing Dura-Lock Slot Track Sections. Dura-Loc (TM) track.\nhoslotcarracing.com @ HO Slot Car RacingWholesale Car Racing Set Manufacturers, from Car Racing Sets Wholesalers. Online find wholesale Race Car Set Suppliers to get free quote & latest prices at Online.\nHK MODELS HORIZON MODELS IBG MODELS. Slot Car Racing. AFX RACING AUTO WORLD. Retail Price: Status: AFX RACING AFX-1013: HO.MRE for Scalextric and all other brands of slot cars. Perfect for racers or serious collectors.\nSlot Car Meetups - MeetupLife-Like Track & Accessories (27) Lionel TCR Track (5) Marchon Track (30). LIFE-LIKE HO Slot Car Racing Dura-Loc 9-Lap LAP COUNTER Track 9901 Unused Rare.arace.hk: Get the ultimate digital slot car racing experience at ARace, the first and only digital slot car race venue in Hong Kong. Perfect for Birthday parties.NASCAR® Deluxe Lightning Race Car Set is. side-locking Dura-Loc® track system; Magnets and unbreakable stainless steel slot pins keep cars on track and in.\nSlot Car Crossing - Holly, MI - Racetracks on Waymarking.comOur philosophy is to serve people who have a serious interest in slot car racing as the focal point of the hobby in their lives … and to provide this service in the.Tag ikke fejl, slotracing er først og fremmest motorsport ! Men Slotracing er også spænding og godt kammeratskab. Jeg er selv en genfødt SlotCar racing fan.\nUp to 6 drivers can race at the same time with full monitors to watch the competition.PERFOMANCE ADD TRACK TO YOUR SET 13110 ST 5.99PR 13112 CURVED 5.99 PR 113113 SQUEEZE 5.99 PR CHOCKING HAZARD - CONTAINS. read more.Hot Wheels Slot Car Track Set available from Walmart Canada. Rated 5 out of 5 by Ldyblue from Hot Wheels Race Track Bought as a Xmas Gift,. loc_en_CA, sid.Arace slot car racing has a 50-meter Carrera track designed by the Director who is the visionary behind bringing digital race car driving to Hong Kong.Reviews on Slot cars in San Francisco, CA, United States. I brought my kids there for 15 minutes of slot car racing and they had a very. (Hong Kong ) English.Here, our editor breaks down the contents of her diaper bag to show us her favorite tips and tricks for keeping it all together.Slot Car Illustrated Forum > Scale Racing > HO Scale Slot Cars: AFX Speed-Loc Banked *S. The views expressed on Slot Car Illustrated are exclusively.\nSlot Cars & Kits Airfix All Slot Car Arrow Chase-Cars Falcon HPI Mitoos Original Slot Car Polar Lights Policar. MRE are slot racing specialists, and stock all.Details about Life Like Racing Track Straight curve Dura-Loc Slot Car Road pcs. Taiwan, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands.Amazon.com: 2 LIFE-LIKE HO Slot Car Racing Dura-Loc 9\" Straight Criss-Cross Track 9925 GLOW!: Toys & Games.Find great deals on eBay for slot car racing and track race. Shop with confidence.Slot Cars Sets – for Beginners and Masters. There’s nothing better than the thrill of the whiz, dip, and slide of slot car racing. One of the world’s most.ARace Slot Car Racing Hong Kong. 291 likes · 1 talking about this · 105 were here. Arts & Entertainment.\nShop for slot car on Etsy, the place to express your creativity through the buying and selling of handmade and vintage goods.Find high quality Slot Car Racing Track including related Slot Car Racing Track Suppliers, Slot Car Racing Track Manufacturers and Slot Car Racing Track Distributors.Page 1 of 2 - DMX Slot - new system with new lane changing concept - posted in 1:32 scale Cars: A brand new slot car racing concept, called DMX (Dynamic Motion.Nascar Style Slot Car Track Ho Scale Race Set New And Improved 20.Walthers has somewhat quietly announced the return of the slot car/train track. fully assembled and simply snaps in place with Dura-Loc road-racing.Find Meetups about Slot Car and meet people in your local community who share your interests.\nSport Bug 1:64 Scale Slot Car Racing Track Ho Scale New And Improved 2016.Shop from the world's largest selection and best deals for Scalextric Track & Slot Car Boxed Sets. the first slot car race control system that allows users to.\n2 LIFE-LIKE HO Slot Car Racing Dura-Loc 23cm StraightThere Are (24) 1:64 Scale Slot Cars For Sale: Image: Item # Item Title: Price: Ends: 2176 Classified: MARCHON 1:64 SLOT CAR RACING CHASSIS HOP UP KIT REAR AXLE.\nRace Sets (49) Aurora AFX Race Sets. 1999 TYCO Mattel 440-X2 Disney Toy Story 2 Slot Car RACE SET Sealed 1957 T. 1960s Hong Kong Cragstans JAGAUR E MERCEDES.Your doorway to the fascinating world of slot car racing. from 1959, but some track sections were produced in Hong Kong and Japan. Testing slot cars.High Iron & Burnin' Rubber - HO-Scale. there's also a complete racing set with easy to use Dura-Loc track that snaps together. HO Indy Slot Car 16' Racing Set.\nLap Counter included to add an extra dimension to make it even more competitive.Set contains2. read more.Make trips with baby stress-free with these travel essentials that keep baby—and the entire family—happy during long drives and flights.China Slot Car, China Slot Car Suppliers and Manufacturers Directory - Source a Large Selection of Slot Car Products at rc car,used cars,baby car seat from China.Life-Like 15 Straight Slot Car Race Track (2 Pieces) Model: 433-9.Officially licensed NASCAR® 4 - lane Race Day Slot Car Set! SAVE ! All of the rush of the race track for up to 4 drivers at once! Bring home adrenaline-pumping speed.Find great deals on eBay for slot car racing sets and carrera slot car racing sets. Shop with confidence.\nSimilar to race car driving, digital slot car racing tests your driving skills, speed control, and braking skills.Find great deals on eBay for ho slot car tracks and skylanders. 24 LIFE-LIKE HO Slot Car Racing Dura-Loc 15\" STRAIGHT TRACK 433-9934 GREAT ADD!! Brand New.", "label": "No"}
+{"text": "Counselage delivers its sales trainings in association with Rain Group. RAIN Group is a global leader in sales training and consulting. Headquartered in Boston, US, Rain Group has offices across the USA and internationally in London, Geneva, Johannesburg, Mumbai, Sydney, and Toronto.\nRain`s sales method is top-rated and RAIN Group was named to Selling Power’s 2016 Top Sales Training Companies list. All programs are research-based with insights from the RAIN Group Center for Sales Research, and field-tested, proven to work for hundreds of thousands of salespeople.\nOur Signature Sales Training workshops:\nFocus: Sales conversations, Understanding buyer needs\nStrategic Account Management\nFocus: Strategic sales planning, Key account management\nFocus: Driving demand, competetive differentiation\nRain Sales Negotiation\nFocus:Sales pricing and profitability, customer relationships\nMastering Sales Opportunity\nFocus:Improve sale rates, planning and differentiating", "label": "No"}
+{"text": "Originally Posted by Zippiot\nBefore I go I want to ask a few questions:\nI noticed it didnt say specifically that the thumb screw would fit the burris, the screw from the burris was too small and allowed it to wiggle in the hole in the carry handle.\nI found a few of those ACOG screws that appear to have a molded washer which cradles the contour of the carry handle, Ill check with some of the M16's here that have ACOG's mounted on the A2 carry handle for bolt fit.\nIt will fit the Burris it's the same specs", "label": "No"}
+{"text": "I’m looking to upgrade the disk brake on my mad4one, to my surprise the existing single piston set really is not powerful enough. That will be caliper and lever. Checking bike part suppliers some are described as rear or front brakes, which is best for a unicycle?\nWith shimano all levers are compatible with all calipers.\nYou could change only the caliper to a 4 pistons.\nBut also the lever system could improve power and modulation.\nThe difference front and back is the position on the handlebar front on left back on right.\nOther difference is the hose length 1mt front 2mt back.\nOn unicycle we use the front version.\nM41 is right, Shimano used a mineral oil in their brake systems allowing you to combine calipers and levers. You sometimes also see Shigura solutions, where the Magura (also mineral oil, but a bit different) is combined with a Shimano caliper.\nBut as he also stated, the lever itself isn’t that good either.\nDepending on your rotor size it could already be an upgrade to go from 160mm to 180mm.\nNext to that it becomes personal preference I guess. I have Shimano Zee (4 pistons) with icetech pads and 180mm rotor on my muni. For me this works very well, but it is sensitive and can completely block the wheel with one finger…\nIf you consider replacing both the caliper and the lever, there is no need to stay with Shimano and you could also consider Hope or Magura (even SRAM, but I don’t have much experience with that brand).\nMagura MT Trail sport is a set (for a MTB, so you only need one) consisting of a 2 piston and a 4 piston caliper.\nBoth should work fine, although my personal preference would be the 4 piston. The whole set is sold for around 175 euros (~ $210), so if you can find a store which sells only one of them, you can have a good brake for a decent price.\nAlternatively the Shimano SLX M7120 could be a good solution. Also 4 piston and very reliable.\nHope is awesome stuff, but expensive and hard to order now since most is in back order, therefore I would recommend either Magura or Shimano.\nOn the other hand, I don’t know your current setup, but if it needs a bleeding that can also be the reason why it’s not powerful enough… Even other brake pads could already make a difference…\nWay over my head.\nThanks everyone, all very helpful. There is a good price for a shimano 4 piston model I may buy. I guess if I was a better rider the existing brake may be ok, but I find I need more than 2 fingers to get adequate braking force, or get distracted when applying the brake so hard. Also on the really steep hills I run out of brake, or at least confidence. Both my KH unicycles have different shimano systems, no problems with their brakes. On my next mad4one I won’t be so cheap and will order better brakes.", "label": "No"}
+{"text": "Whoops, I’ve been bad here since I discovered Tumblr.\nMy Q4 goals were:\n102.7 miles walking and 52.5 miles on the bike. My comment on that was that I hoped to have hit both by the end of November.\nI nearly hit that in October, walking wise, with 99.11 miles walked but fell short on the bike. November was more (less?) of the same: 83.1 miles walked. None on the bike. I will remedy the bike this week but while happy with the miles in mostly unsuitable weather, I need to get to the gym more.\nDecember sneak peak: 42.5 miles walked through yesterday. Yes, I just caught up on tracking.", "label": "No"}
+{"text": "Oversized snow tube\nAerodynamic winged design\nHeavy-duty PVC construction\nFeatures Speed Safety Valve\nThe oversized Sportsstuff Manta Ray snow tube will easily glide down snow-covered hills with its aerodynamic winged design. The heavy-duty directional bottom provides the control needed for steering while also making this tube incredibly tough and durable. Manta Ray features four molded handles so you can keep a grip on this winged creature. Speed Safety Valve delivers the fastest inflation and deflation possible. Durable K80 PVC construction with cold-crack additives. 62\" x 56\".\nThe Speed Safety Valve is a simple, easy-to-use valve that's welded directly to the towable bladder. It opens for inflation when pushed in. The Speed Safety Valve cannot be replaced. If it becomes detached from the bladder, then you'll need to replace the whole bladder.", "label": "No"}
+{"text": "A largely complete 4 inch scale Foster traction engine, built largely to the Live Steam Models design, using their castings and gears - they also machined the cylinder block. Boiler is by the estimable Mr Bell, CE-marked and complete with all paperwork. There are a few modifications to suit the builder's preferences, including double T-ring front wheels and a slightly longer smokebox, giving more weight forward at the front to balance the, er, larger driver...\nThe engine is around 95% complete - it requires gear guard, some boiler cladding and the (supplied) rubber tyres fitting to the steel bands which have already been made and fitted to the wheels. The engine has been test steamed but has yet to turn a wheel on the road.\nComplete with a set of drawings.\nLength 72 inches\nWeight 9 cwt", "label": "No"}
+{"text": "Reliabilt 2 panel santafe interior single prehung door. Interior door: prehung interior doors lowes. French closet doors lowes. Interior french doors: interior french doors at lowe#039;#039;s. French closet doors lowes. Interior french doors: interior french doors at lowe#039;#039;s. Engaging lowes french doors interior furniture wood french.\nOutswing exterior door photos wall and door. Caravansplus: spare parts diagram panorama door locks catches. Choose the best color for your front door!. Movable door unique patio door step movable door step. Jeld wen builders direct supply. First impression security doors peytonmeyernet. Lowes shower enclosures photo 4 of 6 ordinary free. Best 25 carriage garage doors ideas on pinterest. Showers solon glass. Little fairy door kayscomicscom. Photos: southern door at oconto football wluk.\n146 best curb appeal images on pinterest curb appeal. Roll up garage doors lowes awesome roll up garage doors. 17 best ideas about metal mesh screen on pinterest metal. New roll up garage doors lowes beercasting. Lowes door threshold garage door garage roll up garage. Blinds: fair french door window blinds sliding patio door. Patio door valances, bay window treatment ideas window.", "label": "No"}
+{"text": "Diamond Resin Soft Wheels consist of a hard plastic hub with a layer of foam between the hub and belt. This wheel will perform very well and have a slight drape to eliminate scratching and flat spots. These wheels are an economical alternative to the Nova Wheel.\n**These wheels must be used with water, never dry.**", "label": "No"}
+{"text": "Honda Outboard Cam Shaft and Rocker Assembly 4 Cyclinder\nThis was removed from a great running fuel injected 130Hp Honda outboard engine. Honda outboard ran without any problems. Oil was clean and clear when drained.\nPart Number: 14111-ZW5-000\nIf you need a part and do not see it in our listings please feel free to call or email us. We have lots of marine parts and will be happy to make a listing for you, or if you need help with your repair give us a shout we’re happy to help.\nPart was removed and inspected by a certified marine technician. Orders are shipped Monday thru Friday upon payment. No hassle 30 day returns, buyer pays return shipping.", "label": "No"}
+{"text": "We have the best prices on tree gear. Did someone undercut us? We will beat any shipped price!\nCall or email us for fast, friendly service and speedy shipping.\n30 years selling tree gear and our on-staff arborist available to aid in tree gear selection.\n“Great service. Very fast shipping.”\nWesSpur stocks all the replacement springs, pulleys, pins, blades, and castings you need to keep your Corona pruner in top condition and cutting efficiently. The replacement parts listed here are for the Corona 68808 pruner head which is sold in our complete Corona pruner kit. If you need assistance selecting the parts you need, please call and speak to one of our customer service representatives.", "label": "No"}
+{"text": "Reivers 19 & Womens Reivers 19\nBerwick Wheelers CC will hold its 6th consecutive annual road race based at Etal Village Hall in Northumberland. Tackling a 19.70 mile circuit of the Reivers road race loop the event has proved both challenging, competitive and an exciting race. For 2019 Berwick Wheelers are proud to continue the same format as previous years with a category 3/4 race just tipping the scales at 40miles. New for 2019 will be a women’s race. The loop will continue to use the added section of 2017 proving successful with the additional climb and finish on Ford Bank which will certainly test both races.\nA field open to 60 riders for both races utilising some of the Tour of Britain route for 2015 takes on Ford Bank KOM climb which have proved to challenge the peloton and make this an electric and nail biting finish. A fully supported event including first aid and on route mechanic means we have the competitors covered for most eventualities. The Reivers and wReivers Road Races starts at Etal Village Hall and is neutralised up Ford Bank for both races before the flag is dropped and the race is started. Both races will tackle the loop twice in total and with the Ford Bank finish.\nFind out more here.", "label": "No"}
+{"text": "Workers’ Compensation Insurance\nMost states require any business with one or more employees to carry workers’ compensation insurance. While you may be a solo operation, you need to get coverage if you hire even one employee for a job.\nWorkers’ compensation pays for medical costs, lost wages, and rehabilitative expenses for employees who are hurt while performing job duties. In some states, you may be liable for injuries even if the employee is horsing around on the job. Getting a workers’ compensation policy makes sure you meet the legal requirements. It also gives you the right protection to avoid being personally liable for the injury.\nCommercial Auto Insurance\nYour work truck is an important part of your livelihood. It stores and transports everything you need to get your job done. This is why commercial auto insurance is so important. Personal auto insurance doesn’t protect you from claims that happen in work vehicles. You want to make sure that if you hit another car that you transfer liability to a commercial auto insurance policy. This policy pays for the damage to the other car and any injuries that may result up to the policy limits.\nOn top of the liability coverage on the policy, you want coverage for your work vehicle if something happens to it. Electing for comprehensive and collision coverage when purchasing the auto insurance policy gets coverage.\nSurety bonds are one tool that helps your drywall business appear more professional to prospects and customers. A surety bond is an inexpensive insurance product that covers your contractual obligations. The bond guarantees that you will fulfill the contract terms. If you don’t, the customer can make a claim on the bond and the insurance company will pay the customer for valid claims.\nUnlike traditional insurance, if the insurance company pays the customer on the bond, you will repay the insurance company the amount lost. Because the bond gets repaid, they are much less expensive than insurance. Many customers won’t work with a non-bonded company.\nRemember that policies only pay up to the policy limits. If your general liability policy has a $100,000 limit, you may have an instance where the claim exceeds it. Excess liability is an inexpensive way to increase the liability coverage that you have. It adds more protection for the most catastrophic losses. First, the baseline policy pays up to its policy limits and then the excess policy kicks in to pay the remainder up to its policy limits.", "label": "No"}
+{"text": "My car is parked there by the meetinghouse, just to the right out of frame. I just about leapt out of the car because the light was soooo nice. Dave Delay and I really lucked out. Check out the little squares of light from the windows on the tower. So cool.\nLandscapeNHNew Englandautumncloudsdawnfallfoliageleavesmeeting housemorningmountainnaturepondskysunrisewater", "label": "No"}
+{"text": "Yell warned over directory dominance\nTHE competition watchdog warned today that Yellow Pages owner Yell was so dominant in the directories market that smaller rivals were struggling to compete.\nThe Competition Commission also said Yell's 'strong position' could lead to advertisers being forced to pay higher prices if a current price cap was removed.\nAlthough the Competition Commission said it had not yet reached a decision on whether to intervene in the market, City analysts said it was now 'unlikely' the price cap would be lifted.\nShares in Yell fell more than 4% following the announcement as fears grew that growth at the telephone directories publisher could be curbed.\nToday the company hit back and insisted that regulation was no longer required as competition in the market was increasing.\nIn April last year the Office of Fair Trading (OFT) asked the Competition Commission to investigate concerns that competition in the classified directories market was not working.\nIn a 'latest thinking' document published today, the Competition Commission said Yell remained 'by far the largest provider in a highly concentrated market' despite the presence of Thomson Local Directories and BT.\n'It benefits from a network effect, which arises when increasing numbers of advertisements in a directory attracts an increasing number of users which in turn attracts more advertisers,' it said.\n'The network effect strengthens the position of the existing providers and operates as a barrier to entry.'\nMost watched Money videos\n- Ford tests traffic light tech that could change the commute forever\n- Renault previews new family car powered by a hydrogen-electric system\n- Ray Massey gets exclusive access to the new green Rolls-Royce Spectre\n- Watch the BANNED Land Rover ad that 'misrepresented' parking sensors\n- 1990's advert for the Vauxhall Cavalier Turbo 4x4\n- Bentley brings the comfort of a limo to their popular SUV\n- Rustbucket Mercedes-Benz roadster sells at auction for almost £40k\n- Ford unveils electric version of Britain's best-selling vehicle\n- A rare 1955 Mercedes 300 SLR Coupe being driven at Goodwood\n- Dreams come true at a price. Most expensive cars ever auctioned\n- RM Sotheby's has sold a Mercedes for a record £115million\n- Land Rover unveils its new £80,000 Range Rover Sport", "label": "No"}
+{"text": "A lot of websites that are online today that cover salary information are nothing but junk. However there are good ones to, so it is important for you to take the time to look around until you find one that provides accurate MRI technician salary resources to their visitors. These websites are very helpful with discovering how much you can earn in a particular position, and they can also help you to discover what type of growth projections are out there as well. All of this can help you to make an organized and effective approach when it comes to your job search so that you can focus your energy on finding the best high-paying job possible.\nUnfortunately, there are a lot of salary information websites out there that are designed to promote a service or product instead of promoting the truth. You want to make sure that you get your radiology salary information from a source that is geared towards helping people find their career niche, and there is one in particular that is very helpful for those who visit. You can find out about salary information, please can also find out about with the job market will look like in a few years in various sectors of the economy. Whether you’re interested in becoming a nurse or a teacher, you can quickly discover how much you can expect to earn in addition to with the overall medical billing certification outlook is looking like.\nThis can help you to organize your ultrasound technician salary search in a way that is most productive and time saving. Additionally, you will be able to take this information and craft your resume in a way that will be most attractive to employers. Since there’s so much competition out there, your resume is probably going to be the most important tool you have that employers will see. So, it is important that you tailor it to meet the needs and electrical engineer salary expectations of each individual company you are applying to work for. A lot of people make the mistake of sending out blanket resumes to a batch of employers at once.\nThis is the equivalent to a computer engineer salary, and many human resource departments are well aware of this practice. So, if you really want to give yourself best advantage possible, it is important to customize your ultrasound technician salary to each particular position your trying to apply for. It may take a little bit of extra time, but it will be well worth it in the long run because you will stand out in a good way, hopefully getting their attention.\nUsing a good salary comparison website will help you to accomplish this, and you can use the information available to give yourself the best advantage.\nJust remember that the quality of the salary information your receiving will have a direct relationship with repo cars for sale and the quality that your resume will have as well as your chances of getting a great job. Additionally, the amount of time and energy you put into taking control of your job search also have a direct relationship with salary you can earn based on the experience you have in the give you get. In short, the more you put into the bank repossessed cars process, the better the results may be in the end. So, make sure the resources you are using are accurate and up to date so that you will be laying a good foundation throughout your search.\nLooking at medical coding salaries may take longer than it used to while also requiring applicants to spend more time developing and customizing their resumes. This is the best way to give yourself the advantage, and a good online occupational therapist salary resource will be able to help you to do just that. But, you want to make sure that you are not just following information or advice that you find on random websites. You should go with the best, and use an online service that is designed to help people get an accurate picture of the current medical coder salary market in addition to how they can make it work for them. The more information you have, the more options you have in terms of finding a good job of a good salary.\nBut, you have to have reasonable surgical technologist salary expectations as well, and it is easy to expect more money than most companies are paying which will lead to a lot of disappointing setbacks throughout your search. But, if you are able to understand what the current market is allowing in terms of salary and benefits, you can have a good sense of how much you can earn in a particular vet tech salary and job. This will help you to discover what employers are willing to pay and you can frame your asking price around this information. And, if you are not happy with salary a particular field is offering, you can always find something else until you succeed in your medical coding schools quest.\nAdditionally, a good salary comparison website will look at all of the areas of the economy and help you to see which ones are expected to grow. This can help you to find a secure radiologic technologist salary position in addition to finding one that pays well and, you may be surprised at how all of this helped you find the job that you actually like doing. Just make sure that you’re not gambling with your future because you are not going to the right lvn salary source of information online.\nThere is never been a more important time take control over your radiography salary search, and may require some unconventional thinking and ideas in order to help you to frame your resume in a way to get their attention. Even though we hear so many electrician salary stories on the news about how bad the economy is, you can succeed and earn more then you can think once you tap into current information about the job market is accurate. Not every website is designed equally, and as mentioned before, the quality of the website will have a sonographer salary relationship with the overall results you can expect to experience.\nGetting a good salary is not impossible, even though many good jobs have been shipped overseas. But, in order to get that good nurse anesthetist salary it is important to have a realistic and methodical plan in place. Once you get the information you need, then you can start crafting a plan and taking other steps to ensure that you are giving yourself every advantage possible each time you send one out. These are just a couple of ideas to consider as you are coming up with a medical terminology course plan that will help you to land the job in the income you really want. It is possible, but it requires an active and informed approach on your behalf.\nDon’t gamble with your ultrasound tech salary prospects, and make sure you are getting your salary and career information from a reputable, accurate and up-to-date online resource. Not only will this help you to have a better sense of the overall job market, but it also will help you to determine whether or not you want to move into another career field as well. A lot of people are transitioning from one thing to another, and a good online careers in the medical field resource will help you to see what is involved in addition to steps you can take in order to be as successful as possible in your search.\nThere are only a few online medical coding education resources that has this caliber of content, and there is one in particular that is easy to use and provides a safe yet highly effective source of information for applicants and job seekers. No matter if you are interested in a job as an engineer or a paramedic, you can make this civil engineering salary information work to your advantage as you discover where and how to get the best jobs out there today. But, if you are not using a good quality salary information website, you can be getting facts that are not accurate which can have the opposite effect. So, take time to ensure that you are laying the groundwork for effective and productive paramedic salary search that will be designed to get the job done.\nNow is the time to kick things into high gear and find a lab technician salary that you like while earning a salary you want, and this website may be all you need to put your best foot forward. If you’re tired of spinning your wheels not having any success at all when it comes to finding that work from home medical billing job, now is the time to try something different and learn about what options are available for those who want to take advantage of them.\nEarning a good salary is not impossible, but the first step is making sure the paralegal salaries information you’re getting is current and reliable. So don’t gamble with your future by wasting your time looking at junk websites that do little more than take your time and focus away from what really matters. You can take more control of your pediatrician salary and your future by visiting one of the best resources available online today.\nSalary is the fruit of your service and efforts. This is a form of veterinary technician salary which is the replacement of the expertise of an individual based from the field where he works on. Today, salary is computed based from the time frame of your service as well as the hours you rendered your crime scene investigator salary expertise to a certain field. But in the previous decades, this is not the case. There is no such term as a salary. What is available during the ancient time is commission. In every services or products you are introducing into the market, you will be given with a corresponding commission. Moreover, in the past, commissions are given in every deal you will close. This is different from these times wherein you can get your industrial hygienist compensations for every 15 or 30 days.\nThere are so many mri technologist jobs available now. Each and every profession comes with different amounts of payment. Dental assistant is among the careers that are gaining popularity now. In case you want to become a professional in this field of practice, you can expect that your annual criminal justice careers and salaries compensation will range at about $33,000. Moreover, there are also some variations in the compensation you will get from this profession. The amount of salary essentially depends from your area of practice (particularly nation) or the level of expertise you have.\nAnother medical laboratory technician salary of practice which is related to medicine is optometry. This is among the medical-related professions that are extremely rewarding. Not only you can help in facilitating the wellness of a person but you will also get the right compensation based from your services rendered. Based from veterinary salary information sources, professionals who are practicing optometry can get an annual compensation of about $104,000 up to $114,000. It was also predicted that this amount of salary will increase in the near future.\nWhen speaking of a rewarding career as well as the nurse training, being a financial planner who is basically involved in money can also get the right compensation fair enough for the service he has rendered. However, there are different types of financial planner present. Every type of planner can generate different rate of compensation. Moreover, the amount is also depending from the deal that was closed. Usually, 20 to 40% of the total deal you will close will be the corresponding certified nursing assistant salary you will get. So let’s say you generated $100,000, the approximate salary you will get is about $40,000.\nTeachers are also among of the most common bookkeeper salary professionals nowadays. Like financial planners, the salaries of teachers also vary. However, this is not influenced with the deal you have closed. But rather, with the social worker job description along with a educational degree you earn at this time. More or less, you can generate an annual salary of about $82,000.\nTruly, engineering salaries are very important to many people. This is where all your efforts and sweats are being paid off. In every profession present, there is a corresponding amount of salary given. Aside from considering what you really want to become in the future, it is also very practical to determine the amount of radiologist technician salary you will get from that kind of profession.\nThe Email address is: email@example.com\nBefore you decide to steer your new ride into your driveway, you currently owe additional around the car in comparison with may be worth. Internet sites that provide employed cars also give a good deal of details that maybe you hadn’t thought about when it comes to the security elements of getting a second hand auto. Repairs from modest crashes could serve utilized cars fine for your rest of the lives, but it really is important to be sure it was never within a big collision. In truth if you know which car or truck you want, ask the dealer if they’ve greater than a single of your very same make and model. Virtually all of those web-sites have a charge, however the tiny charge is effectively worth it should you delve up some information that saves you thousands in the long run. When you invest in a vehicle on impulse, it could be the incorrect auto for you personally. wholesale cars Certainly, in the event you plan on paying money that is an unnecessary step, however the vast majority of folks might be employing a car loan to spend for their next car, so do oneself a favor and save a lot of funds more than the life in the loan by arranging your own personal financing ahead of time with one particular of your on the net loan vendors that concentrate on creating auto loans straight to consumers. A lot of people can not afford to maintain on operating a car for the purpose that they’ve paid by means of the nose to get a high-priced car, well now will be the best time for you to snap these types of vehicle up. Obtaining a warranty readily available sets a great deal of car buyers’ minds at ease. Some automobiles come off the assembly line as a lemon. These seized automobile auctions are held all over the nation even though the dates are in some cases difficult to seek out out. Do a web based search by means of utilised cars for the model and ensure that that you simply possess a quite great concept of what that particular make and model is promoting for.\nThere are also web-sites which specializes in auction cars and normally has quite low costs. This ought to often be remembered prior to acquiring a utilized vehicle. So in practice, for those who are hunting to get budget applied cars then you definitely are improved off hunting at the private marketplace. It really is not uncommon for automobiles to be sold for far decrease than they can in any other marketplace, typically at only pennies around the dollar. You are able to get limitless makes use of to get a month to get a quite reasonable cost, so it is possible to verify out a sizable variety of potential cars as you are buying. There’s a similarity here, but many people come across you’ll find extra advantages with going to a salvage yard.\nThere is no point in beginning your search until you realize just how much income you must devote. Although certainly this will likely expense you inside the lengthy run it can work out less expensive if the auto is nothing at all greater than an old banger. Annually, these cars lose about 20% in worth creating it simple for you to buy a second hand automobile pretty much at half the original price. If you would like to locate a vehicle that is precisely what you will need, it is best to not hesitate to special-order it. Recall, that you are looking for a applied automobile some could have minor problems and even larger ones. Exactly where feasible ensure that that you simply test drive the car for most conditions, one example is up and down hills, in heavy traffic where you are stopping and starting and if attainable a brief drive down the motorway.\nAutomobile buyers are usually faced with two choices – the new cars plus the used cars option. Essentially the most exciting way of getting impounded vehicle is by means of auction. Salvage cars are made use of for a lot of factors: from transportation, artistic purposes or study and experimentation; there is a great many purposes that these automobiles are made use of for. The initial step of course is exactly where to go and hunt for a single. They do include the ideal warranties even though, and therefore are most normally in the best situation. This may all let you know how the vehicle handles and feels and spend unique focus to not merely how the auto handles but also how the engine sounds.\nMost dealers, to produce a swift commission see prospective utilised automobile buyers and finish up obtaining them to get some thing costly which wont match into their budget, even after the ‘low’ monthly plans. Do not feel pressurized into creating a buy if you are not fully satisfied with it. This can be the most effective solution to measure up a car’s worthiness. You will discover a huge selection of lots brimming with shiny applied cars in many metro regions. For those who select to go privately then you may have less protection in comparison with say buying from the second hand vehicle dealer, while when purchased properly this could are the least expensive way to get the automobile of the dreams. In case you don’t understand the person selling the car, here are a handful of concerns that you just could ask. wholesale cars You wouldn’t need to miss the most effective deal in town, would you. New organizations ventured into this business enterprise and current market place leaders presented new models. Ask for each of the documents, insurances, warranties and so on. Some vehicles may be sold “as is,” in which case you need to take additional precautions before you hand over any of your revenue. The opportunity gives you a chance of owning what you wish. Do they inform their buyers the history from the auto.\nThe very first location to have utilized car or truck values would be the used automobile buying guides put out by Kelly Blue Book and the NADA Guide. This was for the reason that made use of automobile dealers had an had been painted within a negative light. Getting your first automobile might be each exciting and liberating. On the plus side, you do not need to be concerned about steep depreciation fees and also other pricey upfront fees. Other people have a tendency to put somewhat much more work into making their cars far more attractive. You could possibly commit $350 – $600 on a new list of treads, mounted and balanced.\n1 can try one’s luck inside the auctions which might be planned and therefore are advertised in neighborhood newspaper, radio and Net. Ahead of the purchase you’ll would like to have currently done some online research in to the particular make and model that you are thinking about and know associated with any recalls or widespread issues connected with the automobile. Ensure that all of the power alternatives operate, do not just assume they do. You permit oneself to commute day-to-day inside your hometown. A further method to find these seized automobile auctions is on the net. This does not take much time for the reason that most credit unions will post their prices on their websites.\nObtaining these on line auctions is just not a hard activity at all, and yet another benefit is the fact that you are going to have the energy of the Web at your disposal that will help you accomplish comparative studies. If you have checked your local paper currently, you might see the harm the web has done to their classified ad section. These days, you might come across made use of vehicle dealerships, classified advertisements for made use of cars, as well as in a few cases obtain made use of cars online at auctions. Just after gathering each of the information on the unique vehicle you’ve got in thoughts, then comes the decision of exactly where to buy it from. If it is often a manual model, check the clutch to find out that it doesn’t slip. Anything more than 100,000 miles shouldn’t be purchased because the vehicle could have seen a great deal of put on and tear.\nIt is attainable to get something on the web in recent times and that incorporates used cars. Don’t really feel pressurized into making a obtain if you are not totally satisfied with it. The chances of you acquiring the car you may need, within your spending budget, are really very good. You’ll be able to constantly walk out in case you come across the salesperson not interested or unable to match your offer or simply pressurizing you. A vehicle dealer is not your only selection – On line vehicle obtain will save you money and time. Also through this, the non-public salvage auto traders will also get benefited. wrecked cars for sale Do a background verify on the particular person you need to deal with. If a vehicle includes a salvage title, the worth is anyone’s guess, since buyers generally can’t get financing in that situation. Automobile auctions take location all over the United states and online every day. This is why it is very important to understand just how much the dealership has put in to the vehicle. Auctions will be quite properly but no one likes to stand around in the cold. Feel about the method that you feel behind the wheel, the general sound in the automobile, and basic efficiency.\nCurrently, automobiles are built to last a minimum of one hundred,000 miles or far more, so you do not must sacrifice quality and condition to obtain a terrific deal. When you can comprehend so many monetary positive aspects by purchasing made use of cars, your neighbor’s sleek new ride may possibly not look so snazzy immediately after all. So in practice, for those who are searching to purchase spending budget utilized cars then you are greater off seeking in the private market. Newspaper ads and auto magazines are good places to obtain a great idea on pricing and bargains supplied by automobile agencies for buying used cars. Both these areas are terrific areas to locate a top quality auto at enormous discounts, which are generally at around 90% of the retail price. Within this report, we give you some tips on how it is possible to keep away from obtaining a rebuilt wreck.\nAny time you understand the applied automobile and its acceptable automobile components, then you can conveniently see that they are mismatched. This innovation has also been responsible for bringing inside a lot of new company. To help oneself with buying a automobile, it is best to always be ready with adequate suggestions concerning getting a vehicle. They may be a trader looking to pose as a private seller. Prior to visiting a car auction organized by banks or government it is significant to be aware with the most up-to-date retail costs with the cars you would like to invest in so that you are able to be certain to not miss out on any very good deals available considering the fact that you might come across a massive choice of luxury cars some in near new situations and in all models. You then bump into a friend and he sees the earmarked page and tells you some excellent news.\nAntifreeze, car heating, in-car radios and improved braking systems were introduced. It ought to be remembered that employed auto dealerships sell all forms of autos. It is generally smart to take a friend with you when going to the auction, preferably an individual who knows a little about employed cars. Also appear out for imperfections within the metal, which include crinkled, dented, or shiny regions, which recommend the automobile was repaired right after a mishap. Numerous occasions, you might require a down payment or excellent credit so that you can obtain a loan. A good spot to begin with this, would be to decide the book worth of your car which you want to purchase.\nFor instance should you go to a Ford shop and they have used cars that is a franchised dealer, when you see a utilized car lot around the side of a busy road such as Joe’s Motors, then Joe’s Motors is just not a franchised dealer. These auctions for bank repo cars are fantastic sources for acquiring discounted vehicles, but it’s essential to verify the car cautiously before you decide to acquire it. An improperly cared for vehicle could be negative for you personally. The mechanics will generally check the door jambs or car or truck panels if there are actually parts that have darker or lighter paint. Perhaps you wish to try out a automobile mainly because you really feel a brand new car could possibly be taking a bit of the opportunity. The issue you are going to face is that you’ll be competing with these dealers on their very own turf, and this is some thing which you may well be unable to manage. wrecked cars for sale The seller must have the ability to answer all your concerns willingly regarding the history of your auto. You can also ask the dealership to the car’s service receipts to locate out additional about its history of mechanical difficulties. Expense is definitely the most significant benefit when it comes to acquiring employed cars. Should you have some spare time in your hands, it does not hurt to appear, but you are going to want a little of very good luck to be thriving that way. Make a mental note with the amount of wear for bargaining purposes need to you choose to get the vehicle. In these repossessed auto auctions one will normally discover a array of vehicles and automobiles which have been seized by banks or government authorities either form account holders that are unable to pay their bank loans or autos which have been seized from criminals although some cars are ones owned by the government but are no longer in service.\nTry and stay clear of non-franchised dealers: Non-franchised dealers are dealerships that are not part of a name brand dealership. Whenever you get a licensed vehicle at a good quality dealership, you will realize that they’ve inspected the vehicle and that it meets the strict specifications for certification. Check into these issues ahead of getting a auto which is approaching a mileage variety that is certainly recognized to make flaws. If it doesn’t go well through it, you could get an alignment issue or even a suspension dilemma or perhaps even a tire difficulty. The largest benefit of purchasing in the used car or truck lots is the fact that they generally possess the most significant and greatest choice of desirable cars (low-mileage, late model). Should you obtain a two-year old auto with a reasonably low-mileage that the owner has taken fantastic care of, then you can drive a very reputable and nonetheless fashionable automobile at possibly as low as half the value you’d have paid to purchase the exact same car new.\nTypically times they inform the customer what they would like to hear but in no way truly do what it takes to keep a client delighted. For many people today, going to utilized cars dealers to hunt for a low-priced second hand cars for sale would be the organic factor to do. Are you able to think about the cars people will probably be driving 10 years down the road. Maybe the vehicle was only utilised by the household to drive inside the town. There is normally a dilemma inside the mind of the purchaser about the vehicle which he is acquiring. Some insight here may well determine should you have a highly motivated seller and give you the upper hand in the negotiation.\nIn many circumstances the cars will likely be in best working order but there is no guarantee when purchasing a auto from a government auction, so it is far better to be safe than sorry. If that is just not what you want to complete, then focus on trading it in rather, but understand that you can obtain a lower price tag for the car as being a trade-in. There has to be anything else that’s much better and more affordable. Most dealerships have in-depth on the net inventories you’ll be able to peruse at your leisure at household. Using a lower purchase cost, you could afford to purchase a newer make and model for significantly less quantity of cash. Talking about depreciation, utilized cars are certainly not affected by it as a lot as new ones are.\nHow are you able to invest in a employed automobile and avoid obtaining ripped off whilst you do. Most professionals agree that you simply need to choose the pre-owned car. The economic crisis, that result in financial troubles for many, is still not more than and one can look for a great bargain in Florida, too as all more than the United States. 75 percent, and government statistics inform us that the typical car or truck loan is for a period of greater than four years. Once all these items have been asked and verified from the auto dealer, now will be the finest time for you to negotiate with the car dealers to decrease the price or bargain for add-ons. There’s nothing like becoming the very first person to slide behind the wheel of the vehicle and take it household. vehicles for sale It is fairly simple to locate seized cars at these repossessed automobile auctions going at unbelievable low rates, some going for twenty to fifty percent off the original auto value. Verify underneath the automobile for almost any oil or water leaks, also verify the floor exactly where the automobile has been standing for precisely the same. That is certainly why you may need to be quite thorough in your check. Start out the study online before you commence searching at cars for sale. Currently, you need to start by adopting some practices. When you are buying from a dealer then be conscious of all the added extras which they could attempt to entice you with and ask yourself if you definitely need them.\nDo that study and it will give profitable results for car dealers, scrap dealers and automotive spare components vendors. Having said that, under is some utilized car-buying strategies that you just or your mechanic can think about to acquire began. If you strategy to use the car for private purposes then you definitely naturally require to check the condition from the car very carefully, and ensure that it just isn’t as well old. They have also been offered a complete social facelift. As a result, a CPO auto comes up to par with most new cars. And as a result, they situation a salvage title and auction these cars for your spare parts.\nIn the event you are getting a professional pre-owned automobile you also have the option to purchase an extended warranty. One advantage of attending a variety of auto auctions with authentic vendor license is the fact that they assist you gain understanding regarding the costs of cars and spare parts inclusive or exclusive of the repairs to be carried out to them. Examine the tires for even put on, and check out the rotors for almost any critical scrapes or indents that will indicate faulty brakes becoming on the car at one point. These cars are not as old and as utilized because the ones older. It provides you the luxury of sitting at property and bargaining for the car or truck you want at the best attainable cost. Lots of times, this warranty might be for any specific amount of months or miles put on the auto.\nBefore you decide to step foot on a dealership lot, there are quite a few items you may need to consider, which includes what form of car you can afford, what kind of car or truck is correct for you, and what your credit history consists of. When dealers can introduce financing and month-to-month payments into the equation, correct sales and trade-in figures get substantially harder to pin down, so having advance financing can retain the deal basic and save you money. When you find yourself obtaining a utilised car, be certain that you just check the VIN written around the auto title matches with the quantity found at the base of your windshield. Acquiring a completely new automobile in the show room is good but although taking into consideration depreciation price it merely means that about thirty to fifty % from the cars worth is gone and this explains why you’d wish to purchase a used or repossessed auto. Credit unions that usually do not commonly permit rate increases for dealer profit, offer you flat fees to dealerships. The principle reason behind this is that used cars don’t come with any kind of certification as well as there is no assure as it is offered by the car or truck dealers.\nThe very first is the fact that cars once purchased and driven off a good deal instantly depreciate. Steer clear of creating purchases that should not be worthy of the type of life. In certain people’s minds new is generally better, regardless of how substantially additional dollars they might be spending. The money saved by buying a made use of vehicle is since of depreciation (the loss from the economic value of an object on account of its use). Crawl under the auto and verify the frame or unibody members for any indicators of bending, corrosion or other harm. Hunting for any employed auto to purchase but do not seems to be in a position to obtain a single that may be within your suggests. vehicles for sale The magnet will stick for the metal, but will fall off if it meets body filler. If you’re within the marketplace for any vehicle, you could be looking at employed cars inside your location. Yet another reason is the fact that it is challenging shopping for automobile and spend the full payment up front. What kinds of autos are available at 1 of these dealerships. Whenever you acquire a auto that fees less, it is less complicated to qualify to get a loan. Now start the final negotiation method on these three cars letting the dealers understand that they will have to compete with other cars that you simply could possibly be acquiring quickly.\nSome of these cars are generally flashy sports cars and luxury cars which most people can not afford to buy in the showrooms, this autos are nicely maintained automobiles and a lot of the time they may be often in superior condition due to the fact this is the location exactly where banks and government authorities are most keen on when in the procedure of seizing this cars. These can increase the resale for you later and shed light on any previous complications. Mainly because a bargain auto, is only a bargain, if practically nothing goes incorrect with it. It really is not uncommon for automobiles to be sold for far reduced as compared to they can within the other marketplace, typically at only pennies on the dollar. You may decide concerning the characteristics that you are seeking for within a car or truck and then make a decision upon a price tag variety. Uneven tire put on may be indicative of the greater challenge, such as a suspension or alignment challenge.\nMost new cars will shed a minimum of thirty % of their value within the initial 24 months of purchase. Spending budget conscious purchasers seeking for a four wheel vehicle can choose a broken car auction. When you are inside the market place to buy a automobile, you might have some challenging decisions to produce. It is very important to understand why dealers prefer financing more than cash payments before negotiating a lower value for a made use of automobile. Whilst obtaining, a single must be cautious for the reason that this is an unregulated market, with no warranties, lack of complete details about a auto, blind spots and so forth. You are getting the automobile for what it has left, not what it has.\nExamine costs and right after sale warranty if applicable. Frequently the best warranty plans for utilised cars are obtainable on the internet. What to consider When Acquiring Employed Cars for Sale by Owners. Are their cars functioning adequately or are they usually in the repair shop. Locating made use of cars is usually as easy as either going to applied vehicle dealerships, browsing by way of automobile trading magazines or just just acquiring on the world wide internet. The extra you rush, the less likely you’re to get a superb deal.\nImmediately after all, a trip for your nearby car or truck dealer row will likely not get you the kind of bargain you’re looking for. If you buy a single utilised auto that performs wonderful, you happen to be probably to return to that similar dealership to buy the following one. If when acquiring from the private seller you come across any damage or problems down the line, you’ll need to become certain which you have proof and that you simply have a way of contacting the seller. Should you be content you will discover no apparent clues to recommend accident damage verify the basic condition of the automobile for put on. It is within this interest that you just will uncover numerous all terrain automobiles (ATVs) at the same time as sports utility autos (SUVs) amongst other ordinary designs all within the showrooms. Used automobile dealers are authorities at negotiating a deal to their own advantage, so the purchaser should be ready and stick to a wise game strategy as a way to get the most effective deal probable. used vehicles for sale Even when you do not acquire the first time you will have a improved understanding in the bidding method and just how every thing operates. However, you’ll find a handful of things to check ahead of making a buy on a utilised auto. When getting a previously owned automobile, you can go a number of routes. Perhaps, you consider how you can locate out impounded cars for sale. There are an enormous quantity of sites where sellers list their cars in addition to photographs and detailed descriptions and that is the simplest and quickest method to obtain the automobile of one’s dreams. Be sure to have picked no less than five various car or truck dealerships.\nTry to find any evidence that the vehicle has been in an accident inside the previous. The best element is you are able to get them for really low rates if you’re not picky about colors and alternative packages. To place this into perspective, just about every time you take your new car or truck out, throw a 20 or 50 dollar bill out the window. They’ve also been offered a total social facelift. Whenever you take it to get a test drive listen meticulously for almost any noise that never sound appropriate. As well as this list, you ought to involve any solutions which can be essential to you.\nThis class contains a majority of four-wheel drive cars which can be advantaged when it comes to maneuvering in muddy puddles and rough roads. For many people, going to used cars dealers to search for a low-cost second hand cars for sale will be the natural factor to accomplish. The pricing of those cars is primarily based on a ton of things such as marketplace need for the vehicle, expected resale worth later, and so on and so on. Come across out no matter if the type of automobile you want has any popular challenges or trouble spots. The moral here is that a bit of careful investigation could save you a significant headache later. Promoting the car outright will just about normally function out much better for you personally financially, but you also need to invest the time and work needed to sell it.\nWhen you get an accident, nonetheless, along with the insurance business only provides you exactly what the auto will be worth, then you are going to become left owing a number of thousand dollars. Tell them that you simply strategy to buy a auto within the near future and mention what your price range is. It really is doable to find seriously terrific bargains in those, however they are couple of and far between. They are generally located in hidden areas such as the compartment, trunk and door jambs. You could possibly buy the new automobile for twenty thousand dollars or the pre-owned one particular for $12,000. At this stage verify to make certain headlamps, indicator and brake lights work.\nAlso a brand new vehicle dealership can supply the ideal warranty on the car, as well as they’re seeking to construct a strong buyer base. It continues to be okay to get a utilized car or truck if it isn’t as well old. There are some fantastic cars which you can buy at auctions, like government auctions. The oil color shall usually be golden brown or simply somewhat lighter. He may possibly know some inside details of value regarding the bank repossessed cars, and is willing to pass it on to you for some fee. Therefore, let your mechanic or pal do a bounce test to make certain it is in superior shape. used vehicles for sale In the event the vehicle has passed all your tests so far, then it really is time for you to carefully study all of the paperwork that comes using the auto. From here, they could adjust the utilised car’s price tag value accordingly. As soon when you drive your new vehicle off from the lot, the value of that automobile drops by about one-third. Some automobiles come off the assembly line as being a lemon. In essence, which you have located the made use of automobile of your dreams, you’ll be able to go in individual, test-drive the car, and after that talk about price. You’ll want to nevertheless, be careful when applying for a loan of the kind.\nSeveral individuals dream of buying a cheap, fantastic, applied car or truck. If you are a seller, be sure your car is intact with all the required repairs completed. A franchise dealer has a fairly uncomplicated model for the way they value applied cars. At occasions individuals sell off their cars to be able to obtain larger cars for his or her loved ones, but no matter what the explanation is behind selling a employed vehicle, you may need to be conscious that you will discover quite a few used cars out there with much more getting added each and every day. Auto auctions are outstanding platforms which sell high-efficient spare parts to the customers. Additionally, offered that the majority of these cars are repossessed, the majority of them would still be under the manufacturer’s original warranty and the majority of them are relatively brand-new with low mileage.\nThat way, you are prepared to negotiate a fair deal. The first test drive you need to merely be checking the overall fit in the auto. For those who have discovered a “bargain” or maybe a car or truck you just like the appear of go check it out. You’ve made a modest down payment, and you’ve committed to monthly payments for the car. A further way to locate these seized car auctions is on-line. You might at the same time purchase 2 and even 4 applied cars at the expense of your new car.\nFor those who have an accident, having said that, and the insurance organization only gives you just what the automobile will be worth, then you’re going to become left owing various thousand dollars. These feature many of the lowest prices cars anywhere and car or truck sellers in these auctions include government and banks. Damaged autos are either premature end-of-life vehicles impacted by collision or organic calamity, or they’re organic end-of-life autos that have retired from roads following years of in depth use. The economic institutions are not car or truck dealers, and are in hurry to have rid of those cars. You can get any of your repo cars inside your price range and get an instant return and profit on your investment. Yes, some car or truck owners really do make it for your lengthy haul, but statistically, new vehicle owners transfer their cars on an average of 59 months within their purchase or lease date (not rather five years).\nBefore you steer your new ride into your driveway, you currently owe much more around the car or truck as compared to will be worth. For anyone who is presented having a auto that appears clean and immaculate don’t be fooled, it is simple to hide larger issues. The aroma with the new car’s smell that shiny interior, and the way the brand-new car drives will be a sensational expertise. Due to the fact each and every used vehicle is various (mileage, situation, and so on), a purchaser may have to be sensible adequate to estimate the worth. In practice, this does not have a tendency to occur really generally. Should you obtain a car or truck on impulse, it may be the incorrect car for you personally. used vehicles Even when you do not obtain the initial time you’ll have a much better understanding of your bidding process and how almost everything functions. Check underneath the vehicle for almost any oil or water leaks, also check the floor exactly where the vehicle has been standing for the exact same. Having a wide wide variety of automobiles to choose from is a big promoting point for many individuals too. In this day and age state and federal laws prohibit dealers and men and women from selling cars that will need a lot of repairs to unsuspecting purchasers. In the event you walk into a dealership and purchase the car that you simply feel you may need with no receiving more information, you might quickly regret the selection. This may be accurate for some new cars, but numerous other individuals you end up with all the hassle of bringing it back to the dealer for fixing design flaws and recalls the manufacturer didn’t foresee.\nWhen the papers are signed it is time to sit back and appreciate your new ride. You could even uncover employed cars under 1000 dollars becoming sold in a few of these auctions. Turn the car or truck on, and hover your had over the exhaust pipe, [be careful not to location it on the pipe its self, it is going to be hot] then smell your hand, if you smell burnt oil, the piston rings on the car or truck may well be going undesirable. They appear and work on cars every day and must be capable of spot a lemon a mile away. A single other new item that has been introduced into this enterprise model is the fact that these dealerships may also give to get your automobile or truck from you no matter if you acquire a vehicle from them or not. Their bidding costs could start off up at a hundred bucks or reduce.\nEven when you don’t intend obtaining the vehicle online this really is an excellent beginning point for suggestions on how much the automobile roughly charges. You only need to enter what you are seeking for in any search engine plus a number of countless choices will likely be generated for you. This is anything to keep in mind when contemplating a automobile that’s two to five years of age. It would be sensible to have a mechanic verify out the automobile to create confident it’s been properly maintained and that it is match for your road. Check that all electrical and mechanical parts will be within fantastic condition, immediately after that have a look at the tires, glass and paint. Would be the quantity of put on consistent using the mileage from the auto.\nIt is possible to go to their web-site and read the comments with their consumers. Hold in thoughts that this really is the car which you’d be driving just about every day and you need to be comfy. These days, you may locate utilised car or truck dealerships, classified advertisements for made use of cars, and in some cases in certain instances locate utilised cars online at auctions. This can be why it is often a bad concept to get cars from these locations. It is possible to discuss any counteroffers before producing your final choice. Primarily, to get a lot more certain nearby details regarding your particular vehicle, it is possible to get a car shopper that is generally out there at convenience stores and book stores, and look up your car in there.\nWhen shopping for used cars, everybody knows that you simply really need to bargain. From initial road test, some minor complications of the car may perhaps also come out. There are actually few pretty excellent on the net sources where 1 can find very good spare components. He will probably be able to advise you about what to decide on for your particular automobile. Before you decide to purchase a brand new a single and regret it later, think about several of the reasons other persons purchase these previously owned alternatives rather. It is vital for you to possess somewhat artificial encounter prior to so you are able to prevent mistakes and embarrassment within the actual auction. used vehicles Unless you might have pretty deep pockets, these characteristics make the car additional costly and they may not add a lot worth to it. Some individuals can not afford to maintain on running a car or truck to the reason that they’ve paid by means of the nose to get a high-priced vehicle, properly now is the ideal time to snap these types of car up. Because of this, when you are contemplating finding a mid-sized sedan, appear around at other makes and models to have a great concept from the costs, security ratings, along with the basic benefits and drawbacks of every model. Other occasions, the automobile could have already been stolen and was offered a new VIN. There is certainly lots of scope within the business enterprise if one wishes to buy and sell the made use of cars. You will find constantly lots of utilised cars for sale, and if you’re wanting to purchase a made use of auto, one particular with the most significant parts with the obtaining procedure is always to visually inspect it yourself to identify it really is condition.\nSo you are considering finding the most beneficial made use of auto for your funds. The most beneficial element is you are able to get them for actually low prices if you are not picky about colors and solution packages. Verify into these issues ahead of acquiring a automobile that’s approaching a mileage variety which is recognized to create flaws. If it does not go properly by means of it, you may have an alignment issue or perhaps a suspension trouble or perhaps even a tire trouble. Qualities dealers give many comfy choices to take the uncertainty out on the acquiring procedure. Okay, now you realize how much revenue you need for your distinct cars you have in thoughts.\nIf you are buying a certified pre-owned vehicle you also have the alternative to purchase an extended warranty. Instead of having a licence to sell a specific brand, rather you have a great deal greater freedom in what you might show in your lot. For certain, you may trust the car’s brand name and be happy with it. Never ever take someone’s word that it has been inspected already – even when that individual is often a dealership. While purchasing, a single really should be careful due to the fact that is an unregulated industry, with no warranties, lack of complete information about a car, blind spots and so on. Pay focus to the finish with the paint, is it dull or glossy.\nGiven that there will probably be many distinctive cars offered, it are going to be essential for you personally to execute thorough checks to view that is best for you personally. If that may be just not what you wish to accomplish, then focus on trading it in instead, but realize that you can obtain a lower value for your car or truck as being a trade-in. Salvage cars are applied for many things: from transportation, artistic purposes or analysis and experimentation; there’s an array of purposes that these vehicles are made use of for. An additional reason why you’ll would like to look at receiving a employed cars is the reduced registration charge. That indicates no accidents, no consuming or drinking within the auto, and having the oil changed as well as other upkeep taken care of on schedule, and keeping the mileage low to average. They obtain cars for sale at low rates from these auctions and after that mark-up considerably around the price prior to placing them inside the utilised car lots for sale.\nOnce you have made contact using the seller and also have gone to verify the vehicle more than, it is essential that you just get to see all documents associated with the cars history. While every single has its added benefits, purchasing a utilized automobile from the dealership will give you many different benefits. The subsequent issue is concerning the source of these sales. Acquiring a made use of automobile can be a great selection, provided that you just purchase a car which has been well-maintained and cared for. It is possible to also try to contact for some facts from the nearby government organizations. That’s it; that you are in want for speed and convenience from a vehicle. used cars under 5000 Improving the car would further result to added charges passed on to shoppers. Ask to the price and interest rate you wish more than the phone. That wholesale market worth is determined from the cars age, the cars make and model at the same time as options, the mileage and overall condition with the car or truck. They might happen to be repossessed or might have already been the property of the felon or autos that the federal government basically does not want. When you are browsing for the ideal used auto, but do not have the time to go all over town to discover the car you wish, you may turn in your laptop or computer and uncover numerous sources for used cars. Always get a carfax report on a vehicle before you decide to obtain it.\nMake certain that you verify the clutch in manual cars as well as the accelerator in automatic cars. Regardless of whether you are shopping for a 1st auto for the kids or thinking about upgrading an old and worn out automobile, a employed automobile is the smart selection for an intelligent buyer. You could be surprised from the numerous advantages of utilised automobile dealerships. Look very carefully at the bodywork to uncover any holes, dents or rust. Prior to your actual check out to the dealer or private party, make certain that you simply have your financing arrangements all taken care of ahead of time and know specifically how much you can afford to spend. Assume about what kind of computers men and women were utilizing just five years ago.\nBear in mind that these cars are owned previously by the government. You could also publish your ad inside a neighborhood directory web page; this will likely assist you to cover extra sellers locally. You will need to seek out a very good on the net auction service that provides tech support and updated info of auto for you to understand. You can find bound to be auto dealers in it, and you’ll be looking to outbid them on their own turf. To begin with, hunt for retail or wholesale values to the cars you are enthusiastic about, too as these which are obtainable in your budget variety. This really is the key advantage for people today who will give big sums of money for straight purchases.\n” Only 5% of made use of cars are in fact in excellent condition. Auctions for utilized cars can offer you with mounds of opportunities to purchase a superb automobile devoid of spending too a lot revenue. It is generally smart to take a friend with you when going to the auction, preferably somebody who knows a bit about applied cars. The first step to think about, is irrespective of whether or not you have got a automobile to trade inside the initial spot, as you can find numerous different approaches that you can pursue to acquire the most beneficial deal. Moreover, you’ll find a whole lot of questionable tactics that are being made use of by unscrupulous dealers to trick unsuspecting vehicle buyers into paying more than exactly what the car or truck is truly worth. To the bank to prevent storing the a lot of cars which have been repossessed and make up for the lost revenue, these cars are auctioned off immediately which make it effortless for some fortunate individuals to buy relatively new cars and stop getting taken advantage of by vehicle dealers.\nSpeak to the owner too as inspect the auto and be sure the information match. Nearly nothing at all will likely be out of your variety as being a member of the website – you’ll be in a position to obtain a vehicle you normally wanted but could not afford to invest so much revenue on. With auto companies producing cars extra sturdy and sturdy, it makes sense for people on the spending budget to go for a utilized auto. Now, we will provide you with a couple of recommendations on how you might get your first vehicle minus the troubles. It is important to choose on the budget for any employed automobile. If you’re unable to discover a made use of car with somebody which you know then you definitely can verify out the neighborhood newspaper adverts. used cars under 5000 Just after carrying out your homework on the car and also you still never locate any faults that may not be fixed, it is time to go ahead and make the purchase. There are numerous seized cars obtainable from public agencies too. These specific auctions are held at numerous areas throughout the country each year. You can get this data even from local paper advertisements which also supply the wholesale rates of all kinds of cars and four-wheelers like jeeps. For those who opt for this route, make specific you obtain a clear title ahead of handing more than your money. You will find always plenty of utilized cars for sale, and when you are aiming to acquire a employed automobile, a single on the most significant components on the getting procedure is to visually inspect it your self to figure out it is situation.\nThere are lots of internet sites which are devoted to listing the latest seized car or truck auctions within your region. It will not happen, although, any time you do invest in previously owned. The Insurance coverage Institute for Highway Security does some pretty fantastic tests to figure out the vehicle security in a variety of distinct collision circumstances. Another side of this argument is the fact that an added quantity of applied cars call for an extra operation and upkeep charges when compared with a new automobile. Try a three point turn in the automobile, which will verify the reverse gear, and in the event you place the steering on complete lock you will be able to check the wheel bearings and steering rack (your hunting for clunking sounds or creaking). Naturally all cars demand repairs sometimes.\nQuite a few hasty purchases is usually regretted at leisure, but no negative buy can definitely examine to a poorly believed out car or truck purchase. A single advantage of attending different auto auctions with genuine vendor license is the fact that they enable you to get expertise about the prices of cars and spare components inclusive or exclusive of any repairs to be done to them. While it pays to possess a real mechanic look at any automobile you are taking into consideration, knowing the fundamentals to try to find will aid retain you from producing main mistakes. You could either take a look at a dealer for auto auctions or perhaps the government. Whilst you might not be able to test drive cars throughout the inspection you can definitely have a look at each and every nook and cranny with the cars and it is most effective to reap the benefits of this chance. Car makers have made a point of making a more trustworthy and enduring automobile more than the years.\nLease payments are calculated on resale values so it can still give shoppers an idea of a certain vehicle’s worth within the future. Inform them that you strategy to purchase a auto inside the near future and mention what your spending budget is. Using the advent on the net came opportunities for people today to obtain access to factors that wouldn’t usually be accessible. It is up to the purchaser to choose what their demands are, what they are able to afford, and ultimately what type of automobile will perform most effective for his or her unique situation. You could get an idea of how much you’re willing to spend on the made use of car or truck, having said that, you’ll desire to also consider that if you do not have money upfront to pay off the car you may be looking at monthly payments, specially for those who wind up buying from the automobile dealership. Lastly, you’ll want to choose how much you assume the car is worth and make an give.\nDue to the existing economic slowdown, a large number of individuals are opting for obtaining utilized cars as they may be quite inexpensive as in comparison with completely new cars. Websites that provide employed cars also give a good deal of info that probably you hadn’t thought about when it comes towards the security aspects of purchasing a second hand automobile. Even though you don’t plan on financing something, never hesitate to explore that solution. From the moment a automobile is driven off a dealer’s forecourt the depreciation starts and inside the early days the price tag drop is disproportionate towards the cars actual wear and tear. The damaged components are remodeled and rebuilt with effort and produced because the best ones in the auctions. They in some cases overlook the accurate usage of the car or truck in their life style. used cars online Check the gaps among the panels to produce confident they may be even on both sides of the vehicle. Car enthusiasts often go to junkyards and salvage yards looking for hidden treasure. This can get you on the road and allow you to to avoid, or manage, really serious challenges. With that information in thoughts it is possible to move onto more detailed investigation. You can discover cars for sale by looking within the newspaper; having said that you need to purchase a helpful car. You will discover a variety of points you might search for to seek out out how abusive the former owner or owners were to the auto.\nEnsure that which you verify the clutch in manual cars and the accelerator in automatic cars. Per week or two of automobile shopping can drop your credit score10+ points. Hence the purchaser had to keep each of the variables in mind just before purchasing a employed car or truck. Here is how you’ll be able to get 1 of the cheap, excellent employed cars. You can make a decision in regards to the capabilities that you happen to be searching for within a auto and then decide upon a price tag range. Men and women also can look in to a leasing guide even when they strategy on purchasing.\nSimply because they might involve competing bids, set the maximum or ceiling bid you’d be prepared and able to lodge for any unique vehicle model. Getting a vehicle is normally exciting and it could turn out that you’re losing a lot of the sleep at evening because of this. In Canada, some provinces insist around the purchaser having a Used Car Automobile Information Package (UVIP) when purchasing a applied vehicle. That is particularly helpful for each cars that you just intend to purchase as well as for recognizing the worth of the car you presently personal in the event you program on trading it in towards the dealer. So when you find yourself taking into consideration buying a previously owned automobile, what measures should really you take. Some insight right here may figure out for those who have a extremely motivated seller and give you the upper hand within the negotiation.\nIn case you see the make and model of your vehicle you happen to be interested in, in two various auto showrooms, and 1 provides you a discount, call up another individual to locate out if they will match this offer you with something far better. In addition to that you could reasonably add a further $1,000 to that to cover the price of the dealership’s sales commissions, marketing costs, rent along with other things regarded as their “overhead” expenditures. You ought to make it a point which you visits the seller and do all of the needed checks by oneself. What about some far more creative methods to uncover an awesome, low-priced applied car. With a decrease purchase price tag, you’ll be able to afford to purchase a newer make and model for less quantity of cash. The far more you rush, the less likely you will be to get a good deal.\nThat way if they have received new shipments and hadn’t gotten around to listing them, you could possibly be one of the initially to appear at it and quite possibly obtain it just before any person else does. Many people tend to overbid out with their pride to win a bid even when the auto does not seriously cost as substantially. You would also be capable of view cars from all makes and models which are put up for auctions. To get a very extended time, only car dealers and vehicle brokers knew in regards to the existence of these car auctions and they have been able to make a killing out of these purchases. And cars could be bought for as small as 500 dollars. If there are bubbles this is a confident sign of water in the oil and probably to outcome in high-priced repair. used cars online Failing to conduct a comprehensive test drive is a different typical error. A lot of consumers search for bargains that final previous the obtain with their vehicle. Always be patient when acquiring a vehicle, and never ever jump into issues. These add-ons could consist of, absolutely free detailing solutions or free of charge access to 24-hour towing services, among other right after sale auto solutions which will provided to buyers. You can pick numerous cars in the showroom but these cars are extremely expensive for you. Should they place it at say 1000 above, they could very easily let folks bargain them down that 1000 and nevertheless obtain a price they feel is fair.\nIt appears fishy that these good cars are actually that very easily readily available. Utilised lots are overflowing, and millions of cars come from expired leases. Always ask for almost any background the owner has around the auto and ask to see copies of the history including services or perform carried out. Why commit that added investment, when you shall see no return. Check if any repairs are needed at the present point of time. Seek out dings and car harm that may have to have repair, and in particular for signs of rust as this can be very hard to eradicate after it has begun over a automobile.\nLots of instances it may possibly be improved to get a auto through a applied auto dealer due to the fact the dealer may possibly take the responsibility, may be a lot more open and specialist, may possibly reveal a lot more, could be a lot more cautious, and present full service. On the other hand instances have changed and also the private folks have develop into more knowledgeable and therefore are now conscious of those repossessed auto auctions. You need to accomplish investigation to seek out a applied automobile that’s in commonly good driving condition. You’ll find bound to be car or truck dealers in it, and you’ll be trying to outbid them on their own turf. Make sure to appear more than any applied cars you’re keen on for rust. Use as a great deal spare time as it is possible to; it will ease your buy knowledge.\nYou’ll be able to pay a visit to their internet site and study the comments of their buyers. These function many of the lowest rates cars anywhere and car sellers in these auctions include government and banks. It could also mean the automobile has been wrecked inside the past and not repaired correctly. So you have got had a look on line in the Kelly blue book, and have got a cost in mind. The vehicle may be stolen, or it might be damaged in some way that may perhaps not be instantly evident or detectable. Not be afraid to ask the salesman when the car had ever been within a wreck or when the owner reported any harm repairs.\nWhen the oil is dark then it is possible that the car features a really dirty engine. Check out automotive sites, and appear at regional dealerships’ inventories on their sites. If you want to become an educated purchaser of utilised cars your objective should really be to locate out the cars wholesale price tag then just how much the dealer has put into the car to obtain it prepared. Make certain there is a clear title and that the vehicle is mechanically sound, at the same time. Due to the fact you kept the sale of your made use of automobile and also the trade-in of the car or truck completely separate you can now see clearly how superior each cost is and can negotiate every value to your advantage. Doing so is very important to ensure that you are going to go home using a decision car and never a rundown monster. used car search Needless to say, should you plan on paying cash this really is an unnecessary step, but the vast majority of people will probably be working with a auto loan to pay for their next vehicle, so do oneself a favor and save plenty of cash over the life on the loan by arranging your very own financing ahead of time with one of your online loan vendors that focus on generating auto loans directly to consumers. As a result, it is possible to find a lot of cheap car offers on repo auto auctions. When you finally determine what your auto may be worth, and what car you need to purchase and what it is worth at the same time, you could start shopping. The dealer will normally ask you to come in to the dealership to negotiate. This same point might be applied around the case of employed cars also. By using an online site, you’ll be able to save on money and time in browsing for utilized autos, you’ll also get the likelihood to get in touch with these corporations and schedule for any test run as soon as you possibly can.\nGive yourself some reassurance by asking your mechanic to look more than a pre-owned car before you invest in it. One particular can manage to find some wonderful automobiles in outstanding working condition from this supply, and you may finish up finding oneself a actually fantastic deal. When the automobile has done lots of mileage, verify about how it was used. The next thing they have to take into account would be the cost that they’ve paid for repairs and reconditioning the vehicle necessary. Generally occasions there are actually particular financing prices available on these vehicles. Because folks hold hearing news of used cars getting sold out, somebody inside your list of acquaintances is going to be in a position to direct you to a used-car owner who’s willing to sell a car which can be in superior situation and hopefully at a affordable price.\nStand in the front, or even the back from the car or truck, and look along the body line. But prior to getting a made use of vehicle for your self, it is best to take some crucial points into the consideration. Make sure that all the windows climb and down since they really should, that the energy seats operate in all of the directions, that the wipers, directional signals, horn, and electronics function. The first point is price tag you should ensure you need to do your individual appraisal visit and appraise the car your self. Often buyers may get the original factory warranty transferred into their name if it has not however expired. Possess the made use of car or truck checked by an independent mechanic.\nThus, at times, the cars are nonetheless in relatively excellent situation. When inspecting a automobile yourself will not take the place of a professional inspection, it will save you funds even though weeding out the excellent possibilities, from the ones that may perhaps not be appropriate. At this stage, try to remember that you are just seeking and attempting to make comparisons. Manufacturers contact them the CPO cars, or Certified Pre-Owned cars. This may make it better to possess a greater understanding of prices and market place trends, as you’ll discover a huge number of made use of cars listed. Only a number of years ago it wasn’t uncommon to possess complete page of just a single important vehicle brand.\nYou do have to make sure that the automobile you acquire will be worth the worth of the loan, or perhaps the lender could reject it. One particular far more factor you shall take care of is that normally try to find the signs with the engine overheating and need to ask the dealer if the car has a history of overheating. Remember when you looked up the trade-in value to the auto. For one particular, you’ll probably spend money on repairs considering the fact that utilized cars don’t include any warranty. For example, a dealership may have fixed hours, so if any issues arise, you realize exactly where and when to locate the seller. When it comes to getting utilized cars, persons choose to discover something that fits their requires at the same time as their budget. used car search If a number of the documents are missing, then ask the seller to create them prior to producing a deal. You will be in a position to figure out a option or at the very least become informed swiftly. New cars depreciate to nearly 20% the moment you drive it off the dealer’s parking lot. When it comes time to go to the dealership, ask to determine the car’s title. For those who believe the branded cars are as well high priced, then you definitely can just discover some financial help. Many law enforcement agencies sell off vehicles confiscated in accordance with house forfeiture laws.\nPre-owned cars may be great bargains for those who know what to look for. While you could possibly be much exited in the repossessed automobile auction knowing which you will acquire your dream vehicle there, it really is normally best to remain calm and to possess the required facts at hand on the numerous selections you’re going to create in order that you might be certain to not miss out on any superior deals and getting positive that you simply will discover the top offers at this auctions. Usually ask for just about any background the owner has around the car and ask to see copies associated with any history including solutions or operate accomplished. Another side of this argument is the fact that an additional quantity of used cars need an extra operation and upkeep charges compared to a brand new car. Some rusted components may well need to be replaced in order for the car to become protected and operate effectively. In the event the car or truck has metal physique that’s been repaired with body filler putty, the magnet is not going to adhere for the repair also as it does for the other parts from the body.\nDon’t forget that these cars are owned previously by the government. The extra you rush, the extra opportunity of making the wrong decision. You’ll find other factors looked at as well, however the truth is, used car’s Blue Book worth is drastically much less as compared to a brand new vehicle. Possess a operating price range when acquiring a car at utilised automobile auction. To start off, you might use the newspaper, do a preview on the auction, spot out cars that you find exciting, study in regards to the cars on the internet then go back to location your bid. You then bump in to a buddy and he sees the earmarked page and tells you some wonderful news.\n1 of your most effective and normally overlooked outlets for locating used cars which can be priced beneath it is trade in value are public auctions. What a great deal of folks do not know about may be the reality that these cars are then place on auction to members with the public and therefore are literally sold for a fraction of their initial price. Plus, when shopping for from a dealer, you’ll not will need to have various meetings with people you do not know and go through the procedure of obtaining the automobile inspected by a mechanic, and test-driving the vehicle over and more than once again. In most cases, the warranty will state precisely what items are below warranty for example the engine or transmission, to get a particular quantity of months as well as the dealership will cover all components and labor. Information of car auctions can be identified online, in neighborhood newspapers and magazines. Although you’ll be able to get the auto of the dreams and there are many reliable dealers available, you’ll find also several things that you just need to take into account when it comes to producing the decision of not merely the right car for your requirements but additionally the ideal location to get.\nYou could possibly have knowledgeable it several occasions that what you desire is costly, and is out of attain. That could show you whether it’s ever been declared a total loss, either by way of all-natural disaster or an accident. When it takes place to be an individual you realize, you could count on getting it at a extra reasonable price and also you also know the car’s history – has it been maintained well. When they are typically a a lot far better worth than completely new cars, there is certainly also a greater chance that there is one thing wrong with all the vehicles and that means that you may need to check them out far more completely. This can imply that components could possibly have to be replaced. This is therefore a market place that is worth exploiting where the buyer gets additional value that what they pay for baring in thoughts that the majority of this cars are sold with the warranty nevertheless on. used car lots Bu acquiring certified cars, you could make certain that you’re obtaining a car or truck in best condition without worrying about steep depreciation expenses and other highly-priced upfront charges. This can be a regular portion that is definitely replaced at service and may indicate how the owner has been treating the vehicle. In all likelihood, the vehicle that you would acquire from here would be relatively new, and this implies that there won’t be too lots of troubles using the functionality on the automobile. Look at taking it for a test drive, as you have a ideal to perform so. When you assume the branded cars are as well high-priced, then you can merely obtain some monetary support. Come across an auction close to your location by utilizing the auction web site.\nThese data would show you whether or not the automobile is a good acquire or not. One particular beneficial tip is always to initial turn around the radio to make sure it functions, then turn it off for the remainder from the test drive. When the vehicle has accomplished lots of mileage, check about how it was utilized. Check the service history to be sure it matches the vehicle getting sold. Should you are searching to buy a made use of car or truck , the most obvious place is actually a Used Auto auction store. In the event you usually do not come across these complications then it is fair to say you’ve a solid used car that’s unlikely to be a lemon.\nRates of completely new cars are so stiff that owning 1 has grow to be much more of the dream to individual consumers. Most people are also excited to purchase just about anything that they will afford. Also bear in mind that our calculations didn’t take into mind the amount you can save each and every year on ad valorum taxes and insurance for less-than-new cars. Just make certain you find out all the things about that particular automobile you want to buy. A car or truck that has been utilized for a extended time is more likely to have bigger problems as compared to positive aspects. Dealerships, regardless of whether they’re promoting used or new cars, rely on men and women with sales education, which includes graduates from and auto sales college.\nEven so, these auto auctions will not be restricted to auto dealers only and any person together with the appropriate sources can participate. There are many tricks, which skilled mechanics use to stop an engine from passing oil via the exhaust. These factors, while minimal from what it could seemed could up to bigger amounts and savings afterwards. One more reason why you should look at acquiring a made use of cars may be the reduced registration fee. It is also probable that you simply will never understand the car’s complete history since the automobile history report only reflects just what the earlier owners decided to report to their insurance coverage organization or to the Department of Motor Autos. Dealers will tell you they just can’t shave $200 off the price tag or they may go broke–do not believe it.\nOne example is for those who go to a Ford shop and they’ve made use of cars that’s a franchised dealer, for those who see a utilized vehicle lot on the side of the busy road which include Joe’s Motors, then Joe’s Motors is not a franchised dealer. In several instances, acquiring new cars alternatively of employed cars could imply that you expose yourself to significant financial loss. If it appears that they are wearing significantly faster on a single side on the tire, that may well be an indication that the front finish may perhaps want function and also you ought to also aspect that in to the vehicle price. You can find truly folks who use these auctions as their source of steady income. However, in case you are obtaining the auto in a discounted price, perhaps, you can afford it. It’s essential to also be informed about these car or truck repossession laws. used car lots Improving the vehicle would further result to added charges passed on to shoppers. Families with many children often require a car, or greater than a single in a few situations, to travel. That may be a tall order; getting a low-priced, used automobile that also fits the above mentioned criteria, but it is often carried out, you simply need to where to appear, and how to shop. If you discover 1 that may be a certified pre-owned vehicle, that’s a very good sign: the dealership is certifying that it really is in wonderful condition. Check the steering wheel, and accelerator pedal rubber for excessive wear, the clutch and brake pedal rubbers may be replaced, however the accelerator pedal is really a lot harder to adjust, and can give a truer indication of mileage. You might have heard stories of persons obtaining a Mercedes for $500 at these auctions.\nMake certain which you verify the clutch in manual cars and the accelerator in automatic cars. Unfortunately it really is all as well easy to get a low-cost used car that is, nicely, inexpensive. You may be surprised through the numerous advantages of utilised automobile dealerships. Newspaper advertisements and auto magazines are good places to obtain an excellent idea on pricing and bargains offered by vehicle agencies for purchasing utilised cars. Such autos are sold at reasonable prices however they still may be quite pricey. There’s a similarity right here, but many people uncover there are more advantages with going to a salvage yard.\nBoth dealers and individual sellers will lie about the situation with their vehicles in some situations. In all likelihood, it is best to never ever pay the Kelly Blue Book retail value to get a made use of vehicle. ) in many instances, but you won’t have to meet 46 distinct sellers either. Quite a few auto owners take exceptional care of their automobiles, and you can hardly detect the use of some utilised cars. To start off, you may make use of the newspaper, do a preview of the auction, spot out cars that you just discover exciting, research about the cars on line after which go back to place your bid. The condition of the made use of car or truck comes into the image as soon as you have established what your goal for the vehicle is going to become.\nWho’s on their way to getting in a position to constantly get good cars. Very first there is the issue in the top quality in the vehicle. As soon as you know all about these issues, it is possible to easily determine when the auto parts happen to be replaced. It would be much better for those who would take with you an specialist in second-hand cars. When it is time to buy, look at substantial and tiny dealerships too as at autos becoming sold by their owners. This will aid just about every purchaser to find what they want within a automobile.\nA lot of of those autos come from government or utility organization fleets. For example, acquiring a clear picture of a car’s worth has been fairly tricky inside the past, but right now it’s as quick as creating a few clicks on the net. There are actually several locations all more than the online world where you’ll be able to research employed cars, uncover information and facts you may need to pick the make and model that you want, and make your buy. Within this economy quite a few people think about getting a monthly vehicle payment a burden, and they have no problem driving one thing that they can spend off in a quick period of time or simply buy outright at a a great deal reduce price tag. A car dealer isn’t your only choice – On the web car buy will save you time and money. Owners who sell their utilized cars name their prices primarily based on vehicle dealerships’ prices on comparable cars although often, they may even ask to get a larger price tag in comparison with counterparts being sold in car dealerships. salvage cars for sale And you may decide on your vehicle and that also at your value. When obtaining anything of substantial worth it is normally most effective to think about all feasible angles just before sealing the deal. The fascination with vintage cars is popular among men and women everywhere. This can be why it is vital to understand how much the dealership has put in to the automobile. They might have taken the car or truck being a trade against getting a new automobile, which implies they didn’t pay any cash for it, or they purchased the car or truck from a private seller, an auction or wholesaler. Great ones of these incorporate magazines such as Auto Trader, Exchange and Mart etc but these may vary based on your location.\nThe most beneficial approach to commence your search is by means of the yellow pages or your local phone book. Properly, such a direct access for the car has to be welcomed open-heartedly. But even so, you should nevertheless appear in the mileage of your automobile. Some cars are recognized to be problematic at particular mileage points or have a list of recalls on various components. Undoubtedly not, you are able to typically pick most any type of car from the respected dealer, from trucks and sports utility autos to sporty models, both foreign and domestic. For those who are looking to get a sports car or truck, an pricey car or maybe a classic then you definitely may check out auction web pages rather.\nOften instances they inform the customer what they need to hear but under no circumstances truly do what it requires to help keep a customer content. Enthusiastic purchasers shouldn’t overlook to ask almost everything about the car they wish to purchase. In Canada, a few provinces insist around the purchaser finding a Employed Auto Vehicle Information and facts Package (UVIP) when acquiring a utilised vehicle. Maybe the automobile was only used through the household to drive inside the town. It is usually advised that whenever an individual is going for the acquire of some substantial value then he need to contemplate all the aspects before going to the deal. Some insight right here may possibly figure out in the event you possess a very motivated seller and give you the upper hand inside the negotiation.\nThere’s no denying that sense of pleasure when you’ve just bought a brand new car. If you method the auto dealer or seller, ask for your vehicle history report. So normally you may get the auto “as seen” and this is the danger you take for saving a few hundred pounds or extra around the car. Purchasing utilized auto dealer though it provides individual’s more leeway on his spending budget, have to additionally be completed very carefully. As many instances folks can’t afford to spend a sizable sum of revenue to purchase a vehicle, they visit vehicle sales that continuously take place and also by searching carefully, they’re able to normally find deals that are surely worth it. The CPO system had offered applied car or truck buyers the assurance that they’re obtaining a auto that is certainly helpful and not far more of the headache.\nIt is difficult to discover a car that matches all of the desired capabilities. Usually do not really feel pressurized into producing a obtain when you are not absolutely satisfied with it. Ask the dealer if the automobile was a trade-in or purchased at an auction, then ask what they have accomplished to recondition the car (did the dealer put in a new transmission or just inspect and detail it. Be sure you have an thought in thoughts before attending auctions for applied cars, know your budget, have a sort of automobile in mind, try and recall what it will probably be utilized for. But what may possibly in some cases turn out is that you are overwhelmed through the large collection of diverse cars varying in rates. DMV’s charge significantly less for registering cars that happen to be more than 5 years old, and you can save a couple of numerous dollars over a year that way. salvage cars for sale In sharp contrast to the 45-60 percent drop-off in value to get a brand new vehicle, a 2 year old vehicle will preserve most of it really is value all of the way up until the fifth or sixth year of ownership just before it begins to drop in value once again. In case you don’t have someone who knows sufficient about cars and what to try to find when acquiring second hand then it could save you income and heartache within the extended run should you have been to spend a mechanic to go and appear over the automobile with you prior to committing oneself to buying it. A dealer makes roughly $2,000 in profit on the typical applied automobile. With the increasing expense of extras, it has become harder for men and women to locate reasonably priced rates even for pre-owned or made use of cars. For those who stroll into a dealership and invest in the automobile that you feel you may need with out getting added facts, you are going to soon regret the choice. Begin with some general investigation in to the form of car or truck and its history of complications.\nGoing through auto value guides such as KBB, Black – Book and Nada may be fairly valuable for you. Bring a laptop or mobile device to gain access to the web although you’re purchasing. All you will need to perform 1st will be to generate your personal e – Bay account then fill out all the necessary fields. If every little thing is within great condition along with the contract is well termed, then, you can attest that low-cost utilized auto auctions really are good venues to buy second-hand vehicles. Lots of occasions for those who are purchasing a applied automobile from an individual you will not have a kind of warranty, even so, if you buy via a dealer it is best to get some kind of warranty. In addition, offered that the majority of these cars are repossessed, most of them would still be under the manufacturer’s original warranty and most of them are fairly brand-new with low mileage.\nOne can attempt one’s luck inside the auctions which can be planned and therefore are advertised in regional newspaper, radio and Internet. That you are not limited to what automobiles were manufactured within the final few years. When buying utilised cars, it really is essential that you simply acquire via a trusted dealership. Considering that getting a brand new vehicle just isn’t normally feasible numerous vehicle purchasers will commence searching at utilized cars. The price tag quote above was only the price you purchase from a normal auto dealer. However, for those who take your family members of 7 on trips while towing your boat, a Suburban will be a great automobile for you.\nCompare prices and just after sale warranty if applicable. You simply must know what you’d like and where to appear. Do your homework and also you may perhaps just land an excellent deal. A brand new car depreciates swiftly within the first few years and immediately after 3 years, it is worth directly about 60-70% of the original price. Considering the fact that most dealers know that they’re able to not get away with promoting a ‘lemon’ they are going to present warranties which will cover most standard issues. Talking about depreciation, used cars are usually not affected by it as substantially as new ones are.\nThe initial is that cars as soon as purchased and driven off lots instantly depreciate. Never obtain the very first thing the thing is, or within this case never believe them once they say that they’re the ones with all the lowest new vehicle and made use of car costs, they’ve to state that, it is their tactics. This really is 1 point which will make or break how much you will have to pay in interest. They’re sold as-is with no warranty and no guarantees. The first issue they take into account is definitely the price tag they paid to acquire the car or truck. These auctions are staged pretty frequently and you may ordinarily choose up a automobile for up to 95 % more affordable as compared to their original retail price tag. salvage cars Unless you may have incredibly deep pockets, these capabilities make the automobile extra costly and they are going to not add much value to it. There are various seized cars obtainable from public agencies as well. A further advantage of shopping for a utilized auto is that you may buy a loaded model with all the bells and whistles which you may well not have the ability to afford had you purchased a brand new vehicle. So before you go ahead and acquire the automobile you wish, you have to do a little analysis. Verify the steering for vibration, or pulling to a single side, its an indication again that the car or truck may possibly happen to be in the accident along with the chassis is twisted. An alternative negotiation method is to allow the dealer realize that you are obtaining the car immediately.\nA number of these cars are typically flashy sports cars and luxury cars which many people can not afford to purchase at the showrooms, this autos are well maintained autos and many of the time they may be generally in very good condition considering that that is the area exactly where banks and government authorities are most keen on when in the course of action of seizing this cars. When each and every resource has its personal positive aspects, other solutions might be a bit riskier than getting straight from a dealership. When seeking to purchase a car or truck, a whole lot of folks are faced with all the dilemma of shopping for a used a single versus a brand new a single. Where will you be in six years for those who sock away the added $220 dollars a month in a rather lousy investment CD having a price of one percent. Sleeping on a large purchase like a applied car is often recommended. Ensure none from the belts and hoses contain any cracks.\nThe owners of these properties need to have revenue, as well as they need to have it rapidly, as a way to save their dwelling. Make certain the you get the car using a clean engine as it is going to be really advantageous. The pricing of these cars is based over a ton of components such as market place demand for the vehicle, anticipated resale worth later, and so forth and so forth. Automobile components have escalated in price inside the final couple of years and in this day and age we really require to watch our pennies. If they do not understand the answers, ask them to find out. Gone would be the days of trawling via stacks of paper to find your new car or truck.\nNonetheless, these vehicle auctions are certainly not restricted to auto dealers only and anybody with all the correct resources can participate. Though inspecting a vehicle your self won’t take the spot of a professional inspection, it will save you money while weeding out the great selections, in the ones that might not be appropriate. These things, although minimal from what it may possibly seemed could as much as larger amounts and savings later on. It is very significant, on the other hand, to get ready your self ahead of acquiring into an auction in order that you would be capable of truly get a great deal and never finish up wasting your dollars over a badly conditioned vehicle. This can not only save you dollars, but it can make sure that it will last for years. For this reason, should you can’t discover a great deal on the utilised auto inside your paper, where can you appear.\nAlso a new automobile dealership can offer the top warranty on the car, as well as they’re hunting to construct a sturdy customer base. As a result, you may need to purchase a vehicle from the brand that you truly trust. You can find web pages on the web which delivers a simple on-line search for utilised cars buyers on government automobile auctions in numerous nations, states and cities. Try and analysis on these cars on the internet to acquire a improved view of them ahead. You may save fairly a little of dollars by finding only what you truly have to have in a vehicle. Also via this, the non-public salvage auto traders will also get benefited. salvage cars Because of this buying a brand new vehicle is really a thrilling event. Just after you might have looked at the key elements the only thing left to look at is definitely the minor stuff. Look well under the hood and in the electrical function. When the fear of car mechanical issues is definitely the principle aspect within your decision, you’ll would like to take an additional look in the details before you decide to make the choices to purchase a new car. Several characteristics you should not overlook are safety and reliability. In most cases repossessed vehicle auctions give fifty to eighty percent off the retail price tag of utilized cars, this car auctions are for that reason normally flooded with applied auto dealer along with the private persons under no circumstances obtain a opportunity to attend this vehicle auctions.\nThe first location to have employed car or truck values is definitely the employed vehicle getting guides put out by Kelly Blue Book and the NADA Guide. 1 more factor to think about will be to understand how you may finance your acquire. Federal agencies also often replace their fleet of functioning vehicles. Another side of this argument is the fact that an added quantity of utilised cars demand an added operation and maintenance charges in comparison with a new vehicle. The shape, colour, look as well as the element of antiquity make these by far the most sought just after cars. There are actually good small business possibilities in second hand auto sales.\nShould you have not auctioned but, stop by an auction initially and observe the approach. This innovation has also been accountable for bringing inside a lot of new business enterprise. This can be normally an indication of body work that was performed to cover an issue. When the paint job has not been well-done and you’ll find distinctive shades amongst panels or even the paint is peeling or cracked, it will want to be repainted. Search all of the web-sites that offer employed cars in your list. This only proves that savings and convenience this system is supported from the shopping for public.\nThis can be a further fantastic time for you to get your hands on dirt affordable second hand vehicles that have been effectively looked just after and still have lots of miles left in them. Following all you, and perhaps your family, will depend on this car, and for those who think about it, your resides are at stake every single time you ride in it. Salvage cars are employed for a lot of things: from transportation, artistic purposes or analysis and experimentation; there is an array of purposes that these vehicles are made use of for. When you find yourself really around the car or truck lot, be willing to leave any time. Having a reduce obtain value, it is possible to afford to purchase a newer make and model for less amount of money. Should you are getting your employed automobile from the dealer then you possess the right to determine the written warranty that is offered by the dealer before you decide to invest in, this really is one way of making sure of what that you are receiving before you commit yourself.\nAfter all, a trip to your neighborhood vehicle dealer row will most likely not get you the type of bargain you happen to be seeking for. Need to you invest in a brand new car or must you settle on the employed one particular. You will find few really good on line sources exactly where 1 can uncover good spare parts. After the very first a couple of years although, a vehicle or truck depreciates in value a lot more gradually, generating it the safer and much better option for the typical customer to get essentially the most worth out of their dollar. You may not have the ability to inform significantly this way but you will at the least get an idea in case you could have to change hoses, battery cables, or if there may be a leak somewhere including coolant or oil. If you can find bubbles that is a sure sign of water in the oil and most likely to outcome in high priced repair. salvage auto auction You do not want to become pressured together with the payment strategy that you just don’t possess the funds for. This will mean that when you find yourself in neutral, your engine will rev up. New cars depreciate to just about 20% the moment you drive it off the dealer’s parking lot. The subsystems for modern day vehicles are extremely pricey. It probably is low-cost due to engine as well as other challenges. Although owning a used auto can save you funds, with no thorough investigation you can end up spending the equivalent of a new auto, maybe even more.\nNumerous folks dream of obtaining a low-priced, good, employed car or truck. Would be the automobile not just gorgeous on the outside but also impressive on the inside. To place this into point of view, each and every time you take your new auto out, throw a 20 or 50 dollar bill out the window. Check out how you may grow your finances by acquiring utilised instead of new. What else need to 1 know about obtaining made use of cars on-line. And because of this, they problem a salvage title and auction these cars to the spare components.\nSome purchasers think that they are able to negotiate so low when paying in cash to get employed cars, but this really is not so. Enthusiastic purchasers shouldn’t neglect to ask all the things concerning the automobile they want to purchase. Also bear in mind that our calculations did not take under consideration the amount you’ll be able to save each and every year on ad valorum taxes and insurance for less-than-new cars. Due to the fact the vehicle value is less the insurance coverage premium is generally much less. From all the study you have got carried out you’ll wish to have a superior know-how with the car and its worth. Japanese applied cars are usually well known since they may be not only inexpensive but possess a sleek comfortable really feel.\nThis type of auto is no longer required to ensure that there is certainly no much more space for it within the government’s parking spaces. When dealers can introduce financing and monthly payments in to the equation, accurate sales and trade-in figures get substantially harder to pin down, so possessing advance financing can maintain the deal very simple and save you revenue. If you really are a newbie, you will discover some straightforward approaches to bid a car from impounded automobile auctions. Because of the purpose that the mechanic is an expert in his field, he can do all of the checks appropriately and provide you with the ideal feedback. Next, ask the individual that you are shopping for the car from or perhaps the salesperson in the dealership quite a bit of concerns. This can help each and every buyer to seek out what they want inside a car.\nAccident damaged cars is often spotted by small tell tail indicators. They generally have physique shops where they fix-up the car just enough to make it appear desirable to a prospective client. Lots of of these establishments have made enacted policies which have produced credit accessible to individuals who will need it. You could not be pondering about staying warm if the temperature outdoors is 95 degrees, but you might definitely get pleasure from a warm automobile in the event the north wind begins blowing. Whenever you are ready to physically take a look at various car or truck lots, don’t let every single dealer run your credit. This can be a superb indication as to no matter if the vehicle has been within the accident and had panels replaced. salvage auto auction Bu obtaining certified cars, you could possibly make certain that you are obtaining a automobile in prime situation without having worrying about steep depreciation fees and also other pricey upfront fees. You should be sensible sufficient to estimate the value with the car. It’s irritating that the guys who do not deserve the car or truck are the ones who get it. For those who discover one particular that may be a qualified pre-owned automobile, that is an excellent sign: the dealership is certifying that it is in wonderful situation. You will find two factors why obtaining automobile that happen to be second hand are less expensive. This could indicate costly wheel bearing complications.\nIt is just not uncommon to locate applied cars beneath 1000 dollars from these car auctions as bids can get started from as low as $100 or less. These can boost the resale for you personally later and shed light on any past challenges. Chances are, you could possibly simply come across the car of your dream to get a value that you just can effectively afford. Newspaper advertisements and auto magazines are fantastic areas to obtain a very good thought on pricing and bargains offered by car or truck agencies for buying made use of cars. Even though it is possible to get an awesome bargain by getting a second hand automobile you could will also get practically nothing greater than an old banger in the event you do not take good care. Consider about what kind of computers folks were utilizing just 5 years ago.\nMostly, 1 should really know how to pick a superb car so he can get the best value out of the purchase. When you are in an instant will need for fantastic and usable automobiles, you will need to verify out the low-cost used car auctions which are consistently held at designated venues. Regardless of exactly where you live be it in CA, Washington DC, Philadelphia, San Diego, Miami, Seattle, Australia, UK or Asia, you could possibly effortlessly discover a nearby auction where you may comfortably do a ?applied auto on the internet purchasing?. These cars are usually not as old and as utilised because the ones older. You’ll will need the car’s make, model, features, mileage, along with the dealer’s zip code to obtain an precise worth. You are buying the auto for what it has left, not what it has.\nUsed cars have already depreciated (60 to 70% in the very first five years). One more advantage that normally comes with applied cars will be the certified pre-owned system. If it’s a household car that you are hunting for to ferry the kids around, don’t get carried away seeking at two seated roadsters. All this depends upon the degree of comfort that one may have when shopping for an older car. You could possibly go over any counteroffers before producing your final decision. Prior to purchasing auto, it is most effective to think about the sort of automobile you will be prepared to spend for plus the solutions that come with it.\nEven though the predicament demands you to travel a few miles, never hesitate. This doesn’t mean you can’t get a loan in case you have undesirable credit, it just implies that you will be paying extra in interest than a person with excellent credit. If you would like to be an educated purchaser of made use of cars your objective need to be to locate out the cars wholesale value and after that how much the dealer has place into the car or truck to obtain it prepared. In the moment a vehicle is driven off a dealer’s forecourt the depreciation starts and inside the early days the price drop is disproportionate to the automobiles actual put on and tear. Immediately after you’ve got made your mind up concerning what sort of automobile you’ll need, it is time for you to opt for the dealers. It is essential for you to have a little artificial practical experience just before so you can steer clear of mistakes and embarrassment inside the true auction. repo cars for sale Then let then know what autos you happen to be right here to find out, and don’t let them steer you away to a different model instead. You’ll be able to also ask the dealership for your car’s service receipts to locate out far more about its history of mechanical challenges. Several employed cars on dealer lots are located at auctions. Within this day and age state and federal laws prohibit dealers and people from selling cars that need quite a bit of repairs to unsuspecting purchasers. They say there is certainly an air freshener you may get for that new vehicle smell. It may well take place that, you’re unable to locate the make along with the model you wish.\nDefinitely mainly because one particular can not afford to buy a brand new auto. A week or 2 of auto buying can drop your credit score10+ points. So in practice, when you are seeking to purchase spending budget utilised cars then you definitely are greater off hunting in the private industry. Undertaking investigation inside the beginning can save owners a headache for the duration of the acquire course of action. Both these areas are excellent places to discover a high-quality automobile at enormous discounts, that are usually at around 90% in the retail expense. Assume about what sort of computer systems individuals have been working with just five years ago.\nMotor autos are registered this way, to help stop them from being stolen and allowing the trading of cars to become taxed. The initial test drive you ought to merely be checking the overall match in the automobile. Maybe a new car appears just like the obvious option, but you will discover some quite substantial rewards of getting a utilized automobile, associated with price tag, upkeep and insurance coverage, which should really be factored in by everyone who believes that new vehicles will be the better solution. This really is incredibly valuable for both cars that you intend to buy and for recognizing the worth with the car you presently personal for those who strategy on trading it in to the dealer. A vehicle that has been utilised for any lengthy time is additional probably to possess bigger challenges as compared to rewards. Appear in the engine for almost any dark stains that may well indicate a fluid leak.\nUsed cars have already depreciated (60 to 70% in the 1st five years). What a great deal of folks usually do not know about could be the reality that these automobiles are then put on auction to members of your public and are literally sold to get a fraction of the initial price. This implies it is best to consider the type of vehicle that may suit your wants and way of life. Soon after gathering all of the facts on the particular auto you’ve in thoughts, then comes the choice of where to purchase it from. Perhaps you don’t truly need to place down the money for a new automobile. Before obtaining auto, it is ideal to consider the sort of automobile you are prepared to spend for and the selections that include it.\nThe dealer desires property court advantage–don’t give it to them. Primarily, where do you visit obtain out about reliability along with other factors due to this automobile. These laws allow the agencies to help keep home of those arrested for a range of crimes, particularly drug crimes. 75 %, and government statistics inform us that the typical vehicle loan is for any period of more than 4 years. A easy drive off the lot together with your new sedan will probably drop the price of it considerably even though you’ve yet to take it onto the highway. There is nothing like becoming the first particular person to slide behind the wheel of the automobile and take it property. repo cars for sale By basically, you would be prepared to choose the top dealership for the vehicle getting. Do not trust just about every word they say and contemplate a third celebration mechanic to inspect the automobile you’d prefer to buy. One of the most essential fluids to verify will be the engine coolant, transmission fluid, power steering fluid, brake fluids and also the oil. In any case it could imply that your next applied car or truck is an absolute bargain. A vehicle might be 5, perhaps even seven years of age and also the situation could possibly be very superior. Should you be purchasing from a dealer then be aware of all of the added extras which they could try and entice you with and ask your self in case you actually will need them.\nEndeavor to keep away from non-franchised dealers: Non-franchised dealers are dealerships which might be not a part of a name brand dealership. In the event the car appears like its completed one hundred,000 along with the clock says 25,000, then you know its been round the clock, or even worse clocked. A franchise dealer features a fairly very simple model for your way they value made use of cars. This implies that even if you acquire the car shiny new, you are able to by no means sell it to an additional person for the exact same cost, even though you just purchased it some seconds ago. Qualities dealers present several comfortable possibilities to take the uncertainty out of the buying course of action. Also try to find excessive wear patterns on the front tires.\nThe owners of these houses need revenue, as well as they want it quick, in order to save their property. Enthusiastic purchasers should not neglect to ask everything regarding the automobile they wish to get. Should you have located a “bargain” or a vehicle you like the appear of go verify it out. There are lots of things that you simply want to lookout for, the worst thing that will happen to you is acquiring a new auto and getting to take it to the shop the next day. Public Auto Auctions, Estate and Bankruptcy Auctions, Basic Service Auctions and Dealer Auctions are platforms exactly where different government bodies like FBI, IRS and Defense Department sell seized cars and worn out army automobiles. These cars are within higher demand and possess a excellent resale worth.\nShould you currently possess a vehicle, then you definitely can seek out dealers who might possibly offer you a superb trade-in value for your existing vehicle and offset the cost of purchasing a brand new a single. Private sellers are slightly trickier considering that the majority of them only have on the web advertisements. The secret is : for the reason that this can be an extremely protected supply of income for the majority of automobile dealerships and isn’t advertised to the basic public. You’ll find some really crucial factors to check on the auto before you buy it. The debate of irrespective of whether to decide on a new automobile or to choose the utilised second-hand cars can be a never-ending story. The point is the fact that this is the source from exactly where all utilized automobile dealers execute their car getting as well, then sell them in a larger expense.\nThey could sell standard cars, or trucks or perhaps farm machinery and recreational and off road automobiles like snowmobiles. It is still okay to purchase a employed automobile if it will not be also old. Ask the dealer if the vehicle was a trade-in or purchased at an auction, then ask what they have accomplished to recondition the car (did the dealer place in a new transmission or just inspect and detail it. Make an effort to research on these cars on the web to get a superior view of them ahead. You’ll need to check the reliability record for your certain example of automobile you are taking into consideration. Should you be definitely worried about acquiring an issue car, this info need to allow you to really feel somewhat a lot more safe. repo cars for sale If a number of the documents are missing, then ask the seller to make them before producing a deal. The next greatest advantage you may obtain is the fact that the original manufacturer’s warranty for your acquire may also nevertheless be in impact. You should be conscious that not every affordable vehicle you obtain can be a good deal. When it comes to used cars, you may have extra selections to select from. Locating 1 which has been effectively taken care of is vital. Whenever they place it at say 1000 above, they’re able to conveniently let people today bargain them down that 1000 and nonetheless obtain a price tag they really feel is fair.\nPrior to these autos are able to receive certification, they will have to undergo a rigorous inspection course of action of each cosmetic and mechanical products. Make certain you have integrated tax, insurance and any accessories you might need to have on top rated on the actual expense from the auto within your price range. Place all this out and clarify towards the dealer that you just need this car just for this price with this payment program. Its licence number, insurance coverage details, and registration papers need to be study in detail, ensure that all of those are for the ideal automobile. The reality is the fact that just about any make or model you could consider is readily available. Feel about what type of computer systems persons had been using just five years ago.\nIf any dealer doesn’t try to meet those figures, just walk away and go elsewhere. Also the expensive cars are becoming even costlier but there is no reduce within the rates. This indicates you can get a terrific car for as much as 95% off the retail price. For starters, you will need to list the capabilities you count on in your vehicle of choice primarily based on its intended purpose. Nonetheless, since a good deal of made use of auto certification programs happen to be sprouting out, ensure you need to do some study ahead of finally settling for 1. Purchasing a car may sound such as an ordinary affair for many however the truth is the fact that it typically gets too difficult specifically with countless brands and models to select from.\nAfter you get house, you are able to search for the Vehicle ID on Carfax to check out its history report. Being able to purchase a certified pre-owned automobile is a different advantage to consumers. The secret is : mainly because this can be an incredibly protected source of revenue to the majority of auto dealerships and just isn’t advertised for the common public. Buying made use of car dealer although it gives individual’s a lot more leeway on his spending budget, will have to be accomplished cautiously. Make sure that all the rest in the bidders will not be individual purchasers looking of these cars like you. This will likely assistance every buyer to locate what they want inside a car.\ndIt is really hard to discover a automobile that matches all of the preferred options. These sellers know they may not have the ability to sell their cars in the identical rates because the dealers can for the reason that they usually do not have to supply the solutions utilised car dealerships do and they don’t have the overhead fees or the markup. Ask the dealer when the vehicle was a trade-in or bought at an auction, then ask what they’ve performed to recondition the car (did the dealer put inside a new transmission or simply inspect and detail it. But there is certainly price tag to pay for all that unbridled joy of acquiring a brand new auto. He could know some inside info of value about the bank repossessed cars, and is willing to pass it on to you for some fee. DMV’s charge much less for registering cars which might be more than five years old, and you may save a few numerous dollars over a year that way. rental cars for sale Are you even getting an sincere answer whenever you ask the owner if the car or truck desires in depth repairs or when the automobile has been giving the owner frequent troubles entailing a massive quantity of revenue in repairing and maintaining the car. The uncomplicated cause behind that is that the existing owner in the car or truck desires to buy the new automobile and desires to sell off his old vehicle. For just a couple of bucks annually, you can easily search via lists of hundreds to a huge number of automobiles of all tends to make and models which are out there in the market place now. If it’s milky, there is possibly coolant inside the sump, and if it includes flakes of metal, which suggests the engine is tearing itself up. This is so mainly because you can then do precisely the same investigation on these models that you just did on your existing car or truck to acquire completely familiar with what they are worth just before beginning the obtaining process. To the vehicle dealer, you’ll be able to conveniently verify their reputation by researching on-line.\nOnce you have examined the pre-owned cars carefully you might determine if the price is ideal or not based on the situation on the automobile. When the vehicle is built at the factory they have robots that paint the vehicle, then they “bake” the paint to stop any rough spots, discolorations, or bubbles within the paint. In the event the car or truck has completed quite a bit of mileage, check about how it was made use of. Verify the service history to ensure it matches the vehicle getting sold. If any dealer promises you a sweet deal, get it in writing. Most cars which might be up on seized auto auctions are repossessed or seized cars.\nEven though that may possibly not be pretty exciting, the money you save are going to be. In all of the likelihood, you’ll want to never spend the Kelly Blue Book retail worth for a utilised car. This can verify such factors because the earlier owner from the car, mileage information related with all the automobile and if you will find any issues relating to finance or insurance. When the paint job has not been well-done and there are actually diverse shades between panels or even the paint is peeling or cracked, it will have to have to become repainted. Make sure to appear over any utilised cars you are interested in for rust. You then bump into a pal and he sees the earmarked web page and tells you some great news.\nIn the event you possess the revenue it is worth travelling to discover the best deals. When dealers can introduce financing and monthly payments into the equation, correct sales and trade-in figures get considerably tougher to pin down, so getting advance financing can preserve the deal very simple and save you funds. We are going to explore a few of the most significant items that you just will want to bring along to inspect the automobile, and offer you a step-by-step guide on tips on how to inspect your applied car your self. Ahead of agreeing to something, you may need to ensure you can get a complete history of the vehicle also as be sure that it is within very good condition. Be sure that all of the rest with the bidders usually are not person buyers looking for these cars like you. Acquiring on line salvage vehicles is one of the easiest and convenient ways to discover these classy beauties which might be often left uncared for and unattended.\ndIn the event the oil is dark then it is achievable that the auto has a really dirty engine. This does not imply you can’t get a loan if you have bad credit, it just implies that you’ll be paying much more in interest as compared to someone with exceptional credit. If you would like to be an educated purchaser of applied cars your objective should really be to locate out the cars wholesale value after which how much the dealer has place into the auto to get it prepared. In the moment a car is driven off a dealer’s forecourt the depreciation starts and in the early days the price tag drop is disproportionate to the autos actual wear and tear. Use your judgment and trust your intuition to ascertain whether or not the car is actually a sensible obtain. When you get a auto on impulse, it may be the wrong car or truck for you. rental cars for sale The dealers preserve this small secret tucked safely away inside their little book of tricks. In the event you do not have an individual who knows sufficient about cars and what to look for when obtaining second hand then it could save you funds and heartache within the long run in case you had been to spend a mechanic to go and look more than the auto with you prior to committing yourself to acquiring it. Even so, it desires thorough on the web investigation and enable from good friends to determine around the most trusted dealer for the specific auto you have on thoughts. To not mention the truth that you’ll spend less funds on the made use of vehicle to begin with. ashtray missing, rear view mirror loose, trunk dirty, and so on). The car’s tires are extremely important to automobile security, handling, braking and acceleration nonetheless, so do not skimp should you do have to put on a brand new list of tires.\nAhead of these cars are in a position to acquire certification, they will have to undergo a rigorous inspection procedure of each cosmetic and mechanical things. It is usually a difficult selection to create when you find yourself purchasing a made use of auto. This way you understand the precise background to the auto sitting around the lot. While, most vehicle dealers won’t give accurate facts, it would nonetheless be best to ask them for this information nonetheless. Shopping for a second-hand auto is an important investment, as you will be relying around the automobile to get you from a to B without having any nasty challenges. It utilised to become that when somebody required a new vehicle that all they had to do was choose what make and model they wanted and take a trip down for the nearest dealership that carried them and buy a car.\nThe answer to this lies in the truth that almost all Americans acquire their car or truck on credit, so in effect they are going for a loan to get these cars. Be certain the you get the vehicle with a clean engine as it will be fairly effective. Needless to say they’re not in a position to predict just what could go incorrect together with the auto, but it aids to possess an expert list of eyes to take a as soon as over appear and be certain that one thing just isn’t terribly incorrect with the car. Many folks are likely to lean toward buying made use of cars for a variety of causes. Obtaining from the new-car dealers trade in is probably going to be by far the most high-priced technique to obtain a employed automobile. Gone are the days of trawling through stacks of paper to find your new vehicle.\nThere are actually particular websites which acquire and sell high-end automotive of Nissan, Honda Chevrolet (Chevy), and Audi, Ford and Hyundai and numerous such providers. Keep in thoughts that this really is the vehicle which you’d be driving every day and you need to be comfortable. For this reason, it is completely required to obtain it checked by a mechanic. This time, when you’re driving you can take a closer look in the aspects most important to you. The very best approach to go about owning a bank repossessed car or truck for sale should be to, go to a compact bank and get the information about the bank repo cars. When you tell dealers you saw one particular of the cars listed for X quantity on the internet, they must honor that cost.\nAdditionally, take a family members member or perhaps a pal who knows about cars with you when hunting in the cars. From initial road test, some minor complications from the vehicle could also come out. Multi-valve, internal combustion engines had been made. For a really lengthy time, only car or truck dealers and automobile brokers knew about the existence of those automobile auctions and they were able to make a killing out of those purchases. After you may have made your thoughts up with regards to what type of car or truck you may need, it is time for you to pick out the dealers. Buying seized cars for sale is definitely one of your lesser known ways of getting inexpensive cars. public auto auction Grab a handful of car or truck magazines that actually sell cars. If the vendor desires to carry out the transaction elsewhere demand that it can be a public place. Car auctions take location all over the Usa and online daily. For probably the most portion, what it is possible to obtain will probably function well for you personally. It is possible to search on the web or talk with auto dealerships to discover precisely what the value may possibly be for the make and model in the vehicle you happen to be seeking. Many people are generally torn involving acquiring a brand new car or truck or maybe a previously applied auto.\nWhen you’ve researched and identified the model you would like, save yourself from losing value inside your investment, and obtain a employed car or truck. While each and every resource has its personal positive aspects, other choices is usually a bit riskier in comparison with obtaining directly from a dealership. Not merely will be the made use of cars will be within demand today, but the spare components of such cars will also be sold at reasonable prices within the automobile market place. Exactly where are you in six years in the event you sock away the extra $220 dollars a month within a rather lousy investment CD with a rate of 1 percent. Shopping for a second-hand auto is an essential investment, as you will be relying on the automobile to get you from the to B with no any nasty problems. Be sure none of your belts and hoses contain any cracks.\nFor instance, you could possibly purchase a made use of sports car that cost more than eighty thousand dollars a couple of years ago, when it was new, for as small as $40,000. If there have been more than a usual amount of owners, you might ask yourself if there is a dilemma or many complications using the vehicle. Be patient, till you come across what you need, and whenever you locate it take a mechanic with you to inspect it. Come across out just how much you’ll be able to acquire made use of vehicle for and then visit your car dealer and allow the games begin, certainly on your terms. When looking to get a utilised auto, the very first step is always to uncover 1 for sale. Once you discovered a auto that appears to match your specifications, you can find some issues it is best to check to produce certain you are in truth receiving a good, low cost car, not only a affordable vehicle.\nLease payments are calculated on resale values so it can nevertheless give buyers an notion of a particular vehicle’s worth within the future. What a whole lot of persons don’t know about would be the fact that these cars are then place on auction to members with the public and are actually sold to get a fraction of their initial expense. Plus, when purchasing from the dealer, you might not require to have numerous meetings with persons you don’t know and undergo the method of having the automobile inspected by a mechanic, and test-driving the vehicle over and more than once more. On the available selections the trickiest of those in our economy is obtaining a new car. For the reason that you’d in all probability spend off the car more promptly, you might save extra income on decrease car insurance coverage premiums. Not be afraid to ask the salesman in the event the car or truck had ever been within a wreck or if the owner reported any damage repairs.\nOne example is in the event you go to a Ford retailer and they’ve employed cars that is certainly a franchised dealer, if you see a utilized vehicle lot on the side of a busy road like Joe’s Motors, then Joe’s Motors isn’t a franchised dealer. It is essential for you to understand ways to benefit from employed automobile auction to create one of the most out of one’s automobile acquiring. However, a car or truck loan may possibly be accessible so you can partition the payments in monthly arrears. He knows exactly where you’ll be able to get that exact identical car or truck at an excellent and inexpensive value. Then get started the car or truck and verify that the air cooling blows cold, as well as the heat is hot. A well-maintained vehicle which has observed too much of use is usually a great buy. public auto auction Failing to conduct a extensive test drive is an additional frequent mistake. Households with many children normally require a automobile, or more than one particular in certain cases, to travel. You should be aware that not every low-priced car or truck you uncover is often a fantastic deal. Second, determine what your credit score is by operating your own credit report before you even start car purchasing. Verify and see if the majority of them are happy with all the vehicle they’ve purchased. This is a superb estimate on what you’d get for those who traded that automobile in to a dealer.\nMay be the exhaust loud or effectively silenced you don’t require to become paying to get a new exhaust program. This was since utilized car or truck dealers had an had been painted in a bad light. You’ll need to make a decision exactly where you want to search for your car. On the plus side, you don’t need to be concerned about steep depreciation costs along with other expensive upfront expenses. They really should pull the automobile firmly to a stop in a straight line devoid of fading or feeling as if they may be going to run out. You could possibly commit $350 – $600 on a brand new list of treads, mounted and balanced.\nMotor autos are registered this way, to help avoid them from being stolen and enabling the trading of cars to become taxed. Enthusiastic purchasers shouldn’t neglect to ask anything concerning the vehicle they want to purchase. A low-priced auto does not imply it really is the best second hand auto available. You need to also search for a far better deal, no matter how you spend, for the reason that the form of payment usually does not make a difference within a sale. It is for this reason that most dealerships involve a “negotiation pad” in what they normally use as their markups. Because the tide of foreclosure properties rises, there are sure to become extra of those possibilities around.\nAcquiring these on line auctions is just not a difficult process at all, and one more benefit is the fact that you will have the energy of the Web at your disposal to assist you carry out comparative studies. This is since new-car dealers only sell the cream of the crop of utilized cares. For those who are genuinely set on getting a utilised auto, you must contemplate acquiring a certified pre-owned (CPO) auto. It is up to the purchaser to determine what their desires are, what they’re able to afford, and in the end what type of vehicle will function very best for their particular circumstance. It quite normally means that these cars are becoming sold off at an incredibly low value too. If some thing occurs or should you are worried about it, you just need to attain out.\nOne particular in the benefits of obtaining utilised cars from big dealerships is the fact that you can find far more to select from. On top rated of that you just should be hunting for virtually every lumpy or out of line spots in the paint. Even if you do not plan on financing something, don’t hesitate to explore that solution. Be sure there is a clear title and that the automobile is mechanically sound, as well. The damaged parts are remodeled and rebuilt with work and developed because the finest ones within the auctions. Often buying a brand new auto there is blind faith that the manufacturer is going to give you an ideal product with no issues for many miles. pre owned cars Following that appear in the coolent and it ought to be filled up to the brim. VIN’s hold a whole lot of details about the vehicle and this will likely give you a far better idea from the cars history. Obtaining a wide wide variety of autos to choose from is really a key selling point for most folks too. Some dealerships invest in inventory from consumers who trade in and repair the cars thereby making the worth to vary by car from a single dealer to a further. ashtray missing, rear view mirror loose, trunk dirty, and so forth). You’ll find several things you might try to find to discover out how abusive the former owner or owners had been for the car.\nIf they’re fairly worn, plan on getting a new list of tires and factor that into the cost you’re willing to pay for your car. Be sensible and don’t go into the dealership without having going to a number of these web sites Cars. Government departments also frequently replace their fleet of working autos. But if the cost has gone as well high, forget about it. The shape, colour, look plus the element of antiquity make these by far the most sought after cars. It is possible to also find some high quality autos at smaller sized dealerships.\nWhen viewing any used cars make certain you do it inside the daytime preferably at the seller’s property address. Nevertheless instances have changed as well as the private people have turn out to be more knowledgeable and are now conscious of these repossessed auto auctions. If a automobile has been inside a collision it are going to be worth very bit much less to any future purchasers, possibly even as much as 30% – so keep that in mind. Be certain to seek out any leaks underneath the auto. Search each of the web-sites that offer utilized cars on your list. You could search on the internet for evaluations at auto forums, with customer reports, or chat with other folks which have the car now or owned a single at sometime.\nExamine rates and just after sale warranty if applicable. Though inspecting a automobile yourself will not take the location of a professional inspection, it will save you money whilst weeding out the fantastic choices, from the ones that may possibly not be appropriate. Don’t forget to stick for your reasonably priced amount and you will be driving residence inside the vehicle without having any hassles due to the fact most of the work was accomplished at house on your computer. The initial step obviously is where to go and try to find one. Normally instances these autos come with specific financing presents, normally at a much reduced rate of interest in comparison with new vehicle financing. It is always greater to obtain a car that has performed much less mileage as the wear and tear around the components won’t be as significantly.\nYou could have seasoned it several instances that what you need is costly, and is out of reach. As a result, even if they do not get an onsite garage, they are going to still depend on someone with great automotive mechanic coaching to do inspections. The economic crisis, that bring about financial troubles for a lot of, continues to be not more than and one particular can look for a terrific bargain in Florida, as well as all over the United States. The sources of applied autos are newspapers, auto magazines, Ebay, other online internet sites, posters, applied auto dealers, good friends and colleagues, Television, radio, liquidators, vehicle mechanics and so on. Though many assume that a brand new 1 is the greatest, it can also be critical to note that with great perception of automobiles, you’ll be shocked to recognize that there are many reliable applied cars around for sale. Unless the vehicle is certified pre-owned and comes using a warranty. pre owned cars If a number of the documents are missing, then ask the seller to make them ahead of making a deal. Households with various children frequently need to have a automobile, or more than one particular in certain instances, to travel. This can be rather unfortunate for the person from whom the car’s possession has been taken, but this offers an awesome chance from a buyer’s point of view. Some dealerships can even enable you to on your quest to seek out the right car. Government bodies and federal agencies including the FBI, DEA and police departments are consistently seizing vehicles. The very first thing to consider when you are searching for a utilised car is exactly what your requirements are in a vehicle.\nSearching for one that you simply fancy has in no way been much easier with all the extended list of inventory that’s updated pretty much each day. Is there a white residue on the cap or visible in the filler location. The knack lies in locating out those cars which are in demand inside an location you live in. Another side of this argument is the fact that an added number of made use of cars require an extra operation and upkeep charges in comparison to a new car. They ought to pull the car or truck firmly to a stop inside a straight line without having fading or feeling as if they may be going to run out. You will discover excellent organization possibilities in second hand auto sales.\nStand at the front, or the back with the auto, and appear along the body line. You could possibly also publish your ad inside a nearby directory web page; this will likely enable you to cover extra sellers locally. ) in most situations, but you will not must meet 46 unique sellers either. Possess a working budget when getting a car at utilised automobile auction. To begin with, hunt for retail or wholesale values to the cars you are serious about, too as these which are readily available in your spending budget range. The automobile identification quantity (VIN) is often a car’s exceptional serial quantity which can be utilized to identify cars.\nFor those who see the make and model of the car you are considering, in two distinct auto showrooms, and 1 presents you a discount, contact up the other individual to find out if they can match this present with anything superior. Through the time a auto is becoming resold, all of those complications must have surfaced and never come being a surprise. On the other hand, using the financial decline in America this perception has fully changed. When rebuilders are within a hurry to put a salvage vehicle back together, they might not be so cautious with repainting the entire automobile. When it comes to acquiring a employed car or truck there’s nowhere greater in comparison with the web that will help you get began. It is constantly better to obtain a automobile which has performed significantly less mileage as the wear and tear on the parts is not going to be as a lot.\nA single on the benefits of getting applied cars from massive dealerships is that you’ll find extra to choose from. Websites that provide employed cars also give a great deal of details that maybe you hadn’t thought about when it comes towards the security elements of buying a second hand car. The threat of getting a vehicle from these dealerships is much a great deal slimmer in comparison with it is at every other supply of utilized cars. After the initial a couple of years even though, a car or truck depreciates in worth considerably more slowly, producing it the safer and improved choice for the average customer to get by far the most worth out with their dollar. Immediately after you have got created your thoughts up relating to what type of automobile you will need, it is time for you to pick the dealers. Shopping for seized cars for sale is certainly one particular from the lesser recognized techniques of purchasing cheap cars. police cars for sale Enhancing the car or truck would further result to added charges passed on to shoppers. You should be sensible adequate to estimate the value with the automobile. Working with the net to locate all obtainable models that you just wish to purchase within straightforward driving distance of exactly where you live can be a excellent way to shop. These auctions are created up of cars which have been repossessed for non-payment and therefore are now place up for auction from the finance business. This really is as a result of reality that they are usually maintained in mint condition along with Japan getting 1 on the leaders in auto manufacturing. Come across an auction close to your location by utilizing the auction website.\nIt is possible to ask your local government or neighborhood organizers about such car sales. Take a pal and also a mechanic with you once you go automobile purchasing. Hence the buyer had to help keep each of the elements in thoughts prior to purchasing a applied vehicle. Undertaking investigation inside the beginning can save owners a headache through the obtain process. This provides a very good way of knowing which example of cars are on auctions and their rates before you decide to even need to have to go the auto auction. There’s a similarity here, but many people uncover you can find a lot more advantages with going to a salvage yard.\nIronically enough men and women who buy completely new cars have just as a great deal of the opportunity of taking their vehicle in for repairs as those who have bought applied cars. Vintage cars from the bygone era rekindle the history. In Canada, a number of provinces insist around the purchaser obtaining a Utilized Automobile Car Data Package (UVIP) when purchasing a utilised automobile. With only a handful of bucks, you’ll be able to have limitless look for any upcoming car or truck auctions in your nation, state or area. Getting a car or truck from a certified Government auction is ok, but buying a vehicle from these small dealers could cost you huge cash in repairs. They might run like Swiss watches, with the very engineered, internal components spinning about inside a fine, choreographed ballet, but that instance of modern engineering could turn in to a pile of extremely costly junk if it does not get the care it feels it deserves.\nRegrettably, a number of people have failed to honor that commitment which leaves the monetary institutions no option but to have the auto repossessed. New cars have been preferred since they came having a new car warranty that covered the car bumper to bumper. We are going to discover some of the most important items that you just will need to bring along to inspect the car, and provide you with a step-by-step guide on ways to inspect your utilized vehicle oneself. The first step to consider, is no matter if or not you have got a automobile to trade inside the 1st place, as there are many diverse approaches that you could pursue to get the ideal deal. Regardless of what sort of car you’re planning to obtain, there are benefits and drawbacks to acquiring verses leasing and new versus used cars. With the current economic downturn, lots of individuals identified themselves within this unpleasant position, which resulted within a variety of repo cars abruptly going up for sale all more than the country.\nAs an example should you go to a Ford shop and they’ve utilized cars that’s a franchised dealer, in the event you see a utilised car or truck lot around the side of a busy road including Joe’s Motors, then Joe’s Motors isn’t a franchised dealer. Purchasing a previously owned car more than a used one particular delivers the consumer using a range of benefits. This is 1 factor which can make or break how much you’ll have to spend in interest. Appear at distinctive cars and avoided becoming narrow-minded when purchasing. Going for rare brands in your nearby marketplace may possibly be an issue mainly because you may not be capable of get the relevant replacement and consumable components. When purchasing privately be sure that you simply find out as considerably as you are able to regarding the make and model of the particular car that you’re going to appear more than. police cars for sale The seller need to be able to answer all your questions willingly in regards to the history in the automobile. This way you will be in a position to note down any difficulty regions when you encounter any. In case you determine what make, model, and possibilities you would like and also you have pre-qualified for any loan you’ve the ammunition you’ll need to buy a utilized auto on the web. To not mention the truth that you can spend less cash on the employed car to start with. It is also essential to help keep in thoughts that dealership will probably by no means sell the automobile at under the wholesale price. This may very well be accurate for some new cars, but several other people you end up together with the hassle of bringing it back towards the dealer for fixing design and style flaws and recalls the manufacturer didn’t foresee.\nWhen going to view a dealer, be clear about your budget and go with a firm mind. But if together with the presence of the enormous crowd, prices may perhaps jack up greater as compared to the car’s fair marketplace worth. Are you currently in the marketplace to get a new or maybe a pre-owned automobile. A new car straight away drops in value the instant it is driven off of your lot. As you ask him, run your fingers by means of the tiny crevasse of fender and hood, for those who really feel the paint to be rough or bumpy this indicates that the car has been repainted. Provided that men and women drive cars, they may need to have to become stacked somewhere when they have come to end of their life span and this can be where a salvage yard will come into play.\nThe majority of impounded cars are privately owned cars which have been impounded through the government, financial institution, police or banks. A few of these cars have witnessed various incidents of the previous. Locating an auto salvage yard does not need to be difficult. Maybe the car was only applied through the household to push within the city. When hunting to get a utilized vehicle, the first step will be to obtain one for sale. Japanese utilised cars will also be common since they’re not just low cost but have a sleek comfortable feel.\nIt is possible to search classified advertisements inside your nearby newspaper exactly where in some cases, they’re going to post an ad. What a whole lot of people today usually do not know about is definitely the truth that these vehicles are then put on auction to members from the public and are actually sold to get a fraction of the initial expense. It is achievable to discover actually fantastic deals in those, however they are few and far in between. You can find only lots of new autos to become released each and every year. Possibly you do not definitely would like to put down the money for a new car or truck. Made use of cars are often the additional tempting alternative.\nOne has to compare prices of the same automobile at various locations. This doesn’t imply you can not obtain a loan for those who have negative credit, it just means that you will be paying additional in interest than someone with exceptional credit. The subsequent challenge is relating to the source of those sales. When you are pleased you’ll find no clear clues to recommend accident harm verify the basic situation on the car for wear. After you’ve got made your mind up with regards to what type of car you need, it is time for you personally to opt for the dealers. Undertaking so is very important so that you are going to go home with a option vehicle and never a rundown monster. police car auctions If one particular includes a fixed budget, it may perhaps be really hard to acquire a vehicle of one’s selection. You could possibly find that financing enables you to obtain a automobile that is more suited for what you need it for. That is rather unfortunate for your individual from whom the car’s possession has been taken, but this delivers an incredible opportunity from a buyer’s point of view. For by far the most part, what you can obtain is going to operate properly for you personally. You could search on line or talk with auto dealerships to study what the value might be for your make and model of your automobile you’re searching for. Many individuals are typically torn involving getting a brand new vehicle or perhaps a previously applied auto.\nBe sure that you simply check the clutch in manual cars and also the accelerator in automatic cars. Though each and every resource has its personal positive aspects, other options may be a bit riskier in comparison with purchasing directly from the dealership. That should give you a great deal of insights a newspaper listing could not offer you. Usually remember that when it is possible to get a good bargain when it comes to obtaining your employed car privately you will not have a warranty as like you’d get from a used vehicle dealer. Such vehicles are sold at affordable costs however they still could possibly be fairly costly. There’s a similarity here, but a lot of people come across you will find a lot more advantages with going to a salvage yard.\nMotor cars are registered this way, to help stop them from getting stolen and allowing the trading of cars to become taxed. When getting a new car or truck you fundamentally are paying for its fresh “new” aroma and warranty. Six years later you would have paid $23,000 out of pocket for the automobile and you will have only $6,000 to show for it if you took really good care on the car and therefore are in a position to get that price tag any time you resell it. Since buying a brand-new car just isn’t always feasible many automobile buyers will get started looking at used cars. Finding a automobile inspected is not guaranteed to prevent all worries, but it is your ideal bet to prevent problems afterwards. Because the tide of foreclosure properties rises, you will find certain to become a lot more of those opportunities on the market.\nWhichever way you select to go to obtain your applied car using a small popular sense through following the ideas for purchasing a employed car or truck outlined above you’ll be able to grab your self an incredible bargain. Auctions for used cars can deliver you with mounds of possibilities to buy a good vehicle without spending as well considerably funds. Just by using a mobile device or laptop, bidders can acquire a salvage vehicle in the comfort with their dwelling. Acquiring made use of permits the person who bought the automobile when it was new to consume the price of the depreciation. He says that these cars are within good situation considering that they are luxury autos that nobody would dare let visit ruins. The CPO program had given utilized car buyers the assurance that they are obtaining a auto which is beneficial and never much more of a headache.\nIt is smart to have a couple of options to increase the chance to win in the course of the auction. As soon as you choose on form of car or truck you will need it is time to do your analysis to narrow down the options. Ordinarily, vehicle auctions are organized through the police, the government or auction lots. Before you think about obtaining a brand new car, contemplate what acquiring a brand new car will mean for your future transportation and monetary wants. Obtaining a car or truck is usually a single of your biggest purchases we make in our resides along with the nagging doubt of regardless of whether or not you will be about to buy a lemon often makes purchasing a used t ocar tricky. Plus, you’ll get the assurance that comes with seeing the automobile in person, test driving it, and having it checked by a mechanic before you decide to obtain, even though acquiring online may perhaps not offer you all of those reassurances. police car auctions Ensure to validate the owner and all of the information regarding used auto ahead of producing a deposit any handing out any money. Many customers hunt for bargains that final past the purchase with their car. It is possible to usually get a fantastic deal from a private party. As the clock ticks, the would like to have the selected vehicle doubles. Considering that you will discover numerous thousands of pre-owned vehicles in the market place, you’ll need to create confident that you just don’t finish up having a lemon. It also allows you to see how firm they may be concerning the deal they are supplying you.\nThe very first spot to acquire made use of car or truck values is the used vehicle purchasing guides place out by Kelly Blue Book as well as the NADA Guide. When buying utilized cars becoming sold by an owner, it is extremely vital to try to remember that you are getting the car or truck exactly whilst you see it, meaning whatever problems the car has, upon obtaining it, turn out to be your troubles. Government departments also regularly replace their fleet of functioning vehicles. The second factor they should consider would be the expense that they have compensated to repairs and reconditioning the automobile necessary. Try a three point turn within the automobile, that can check the reverse gear, and should you place the steering on complete lock you will be in a position to verify the wheel bearings and steering rack (your hunting for clunking sounds or creaking). Don’t count on to aspect with $500 and be driving residence within a three year old SL-500.\nThe owners of these houses need to have dollars, and they need it rapidly, so that you can save their house. A lot of people are too excited to purchase just about something that they’re able to afford. The engine and transmission must be in great condition. Auto components have escalated in value within the final couple of years and within this day and age we really will need to watch our pennies. Bidders takes element in the bidding course of action from any part of the planet. Just after this, look about as you’ll find numerous places where you could attain made use of cars from.\nTake your time and usually do not rush into a buy just because you consider you’ll drop the sale. This will likely give you more negotiating energy as you are able to inform the dealer that you will leave with the vehicle in case your desired value is met. Most sites may even ask for any deposit or bank card data from members prior to they bid. It would be the ideal auto inside the industry that you simply would like to pick for the reasonable value. It is possible to obtain the new car for twenty thousand dollars or the pre-owned a single for $12,000. If it appears actually grimy it is usually a excellent indicator that the owner does not take significantly time to care for the automobile.\nGarage hobbyists will normally be eager to find 1 of those yards because they won’t wish to go out and invest in spare components. Quite simply, exactly where do you visit locate out about reliability and also other aspects for this car. These laws enable the agencies to keep home of these arrested to get a assortment of crimes, especially drug crimes. Wise buyers don’t must undergo the dangers of shopping for made use of cars. See if the oil is among the “add” and “full markers, and if it really is black or a good, golden brown. Just a little rot can turn into a serious costly problem right after as tiny as a single year. police auctions Second hand auto auctions are known for promoting to buyers second-hand cars that are still of great high quality and reliability. The subsequent biggest benefit you might discover is that the original manufacturer’s warranty for your buy might also nevertheless be in effect. Before you decide to obtain an inspection, verify out the car’s history report. Bank repo cars, which is a different way of referring to cars which have been repossessed by banks, are an incredible source for obtaining cars at a discounted price. After you have an knowledge of just how much you should be paying for every single automobile, look about on the net to find vehicles which might be inside your value range. When it comes to deciding on the vehicle, many people have the luxury of getting what they want, while other individuals have the necessity of purchasing what they’re able to basically afford.\nA whole lot of people make use of those yards, not just to find parts for their cars, but persons are working with metal components in a range of strategies. When you’re out buying, you need to absolutely check the vehicle’s history. Nobody will bother you with never ever ending information regarding the vehicle and why you’ll wish to put down money on them. That is normally where you will discover your best deal on Net auction web-sites. Qualities dealers provide a lot of comfy solutions to take the uncertainty out with the getting course of action. This has been the mantra for newcomers and intermediate-level vehicle owners.\nBefore you decide to even go looking for your auto be sure you have got a basic thought of how much cars of similar age and sort go for second hand. You’ll find thousands upon a huge number of made use of cars along with other vehicles all over the country and together with the reputation of your web, most of these cars are advertised on the internet. Some of their merchandise will come from folks who’re upgrading or decided this kind of car wasn’t for them. You will discover wide selections obtainable these days in repo vehicle auctions. You are going to will need the car’s make, model, attributes, mileage, along with the dealer’s zip code to have an correct value. Because of this, how do you come to be a knowledgeable and shrewd utilised car or truck purchaser.\nThis type of vehicle is no longer necessary in order that there’s no much more space for it within the government’s parking spaces. New cars had been preferred because they came with a new car or truck warranty that covered the car bumper to bumper. Just by utilizing a mobile device or laptop, bidders can invest in a salvage automobile from the comfort with their dwelling. However, the true concern of buyers should be to discover the top deal for their needs. When it is running, listen for just about any noises that never sound suitable. Because the crash in 2007 this perception has changed.\nIt is possible to even obtain these cars from certified car dealers themselves. In essence, exactly where do you go to obtain out about reliability along with other elements due to this car or truck. By looking the online world, you could locate out more about the car’s engine, tires, seats and other components. He knows where you’ll be able to purchase that precise exact same vehicle at an excellent and economical value. If you pay a visit to just to appear about and see what they’ve offered, you are going to in all probability finish up leaving having a car or truck that isn’t proper for you. Then the person who buys the car used could possibly get a terrific car or truck for considerably less than the new wholesale prices. police auctions Even though purchasing from a private seller is usually more affordable, there are actually a lot more risks connected with undertaking so. You might discover that financing lets you get a car that is definitely a lot more suited for what you need it for. Constantly be patient when obtaining a automobile, and under no circumstances jump into issues. When it comes time for you to stop by the dealership, ask to find out the car’s title. Even if you’re obtaining a used auto, it continues to be new and thrilling to you. That is a superb estimate on what you’d get when you traded that vehicle in to a dealer.\nUnder are 5 suggestions to maintain in mind when purchasing used cars. These can enhance the resale for you later and shed light on any previous difficulties. When searching to buy a car, quite a bit of individuals are faced together with the dilemma of shopping for a applied a single versus a new 1. Carrying out study within the beginning can save owners a headache throughout the obtain method. So exactly where do you look for employed cars and the way can you make sure you happen to be obtaining a fair and reasonable deal and never a lemon. Actually, they are able to nevertheless appear and run nearly new at this figure.\nA very good selection of automobiles are frequently offered, and they’re normally quite dependable autos. Most quality dealers of made use of cars have credit alternatives readily available for consumers with bruised or broken credit, sometimes under the heading of “second chance finance. Take a look at some applied cars 1st, and you will see some remarkable used cars out their weighting for any new dwelling. You know what your vehicle may be worth and you know how considerably you should be expected to reasonably spend to the car or truck you would like. But however, the great news is the fact that you can find now laws and regulations in spot to guard the buyer from these sorts of activities. You are purchasing the vehicle for what it has left, not what it has.\nAntifreeze, car heating, in-car radios and enhanced braking systems have been introduced. First there is certainly the problem of the good quality in the car or truck. When you’re purchasing a made use of auto, be sure that you simply verify the VIN written on the automobile title matches together with the number identified in the base from the windshield. Prospects are able to look up the worth of the pre-owned automobile within a worth guide to view what their vehicle is going to be worth within the future. Subsequent, ask the individual you are getting the car or truck from or the salesperson at the dealership a great deal of questions. Verify to find out of there’s any white substance mixed together with the oil.\nAlso, take a family members member or perhaps a pal who knows about cars with you when hunting at the cars. Be certain you drive the auto in all of the gears to verify the gearbox. The first thing to check is generally the year of manufacture and also the mileage from the vehicle. Within this post we’ll look at a number of these guidelines and precautions. It is possible to also endeavor to speak to for some info from the nearby government organizations. If you’re thinking of buying a utilised car then the world wide web can be a really useful resource to you. buy a used car The price with the made use of cars is less costly however they are subjected to additional queries in the buyers. New corporations ventured into this organization and existing market leaders presented new models. These specific auctions are held at hundreds of places all through the nation each and every year. It is possible to just go along and take your time in searching in the cars and perusing by means of their parts. In actual fact resale value must have a larger weightage even though obtaining a second automobile. Check out the timing belt to determine if it is worn or cracked in almost any places.\nIf you go to appear at the automobile ensure which you give it a by way of inspection in very good lighting and that you take it for any test drive. It is normally a tough choice to create when you find yourself acquiring a utilised automobile. Get as close as possible for the true worth with the automobile that you just have established by doing your advance analysis on line. Usually keep in mind that when you are able to get a very good bargain when it comes to getting your utilized car privately you won’t have any warranty as for example you’d get from a utilised car or truck dealer. You are able to choose concerning the features that you happen to be looking for in a automobile and then make a decision upon a price tag variety. The most beneficial spot to look for utilised car or truck sales on line would be on the net car-auctions.\nIn today’s economical climate a huge number of folks are searching for solutions to obtain a new vehicle or work car at an economical price. In most likelihood, you’ll want to never spend the Kelly Blue Book retail value for a utilized auto. In the end you’ll be able to get the car or truck you would like in the very best price tag attainable, and understand that it is usually a top quality vehicle when you purchase it. Be certain to hunt for any leaks underneath the car. Alternatively, you may need a bigger SUV for those who are often carrying out sports activities along with your family or good friends. The automobile identification number (VIN) is a car’s distinctive serial quantity which is made use of to recognize vehicles.\nConsequently, from time to time, the cars are nonetheless in relatively fantastic condition. Although inspecting a vehicle your self won’t take the location of a professional inspection, it will save you income though weeding out the good options, in the ones that may possibly not be suitable. As a way to make the most beneficial choice, you need to research your possibilities and acquire as significantly details as you may as a way to get the top deal. A car or truck with dirty engine will burn a big quantity of oil and can not be economically feasible for you within the lengthy run. Every day, a large number of cars are becoming seized or repossessed as a result of default payment on bank loans; US customs etc. Consequently, in the event you can not locate a great deal on the applied automobile inside your paper, exactly where are you able to appear.\nAnother downside is inventory choice at several vehicle auctions. Hunt for indicators of overspray to panels, bumpers and fittings, seek out areas of paintwork which can be inconsistent using the common condition in the vehicle (these could indicate filled dents, filled rotten patches) and verify that each of the tyres are wearing evenly (uneven put on might indicate the vehicle is not running straight and accurate because of a crash or poorly executed accident repair). For any lengthy time employed cars had been viewed as a downright undesirable deal. You could not be thinking about staying warm if the temperature outside is 95 degrees, but you are going to genuinely get pleasure from a warm automobile in the event the north wind starts blowing. With all of the pricing information in mind, you’ll would like to now have a clear picture of how much your automobile should reasonably be anticipated to become worth in case you either sold it your self or traded it in. If you’re really worried about getting a problem car or truck, this facts really should enable you to really feel a little additional safe. buy a used car These websites are usually very good places to discover the essential spare components for the vehicle. When buying something of substantial value it is often greatest to think about all probable angles prior to sealing the deal. Extra services and help can be discovered with made use of car dealerships. For by far the most aspect, what you can obtain is going to perform properly for you. That is certainly lots of funds to buy a further nicer and newer automobile. Look for a few of the much less well known, but nevertheless functional, trustworthy, and safe brands.\nBrowsing for one which you fancy has in no way been a lot easier using the extended list of inventory that is definitely updated almost each day. Nicely, such a direct access towards the vehicle must be welcomed open-heartedly. Owners might demand to get a higher cost considering the fact that they assure the client that they genuinely took suitable care from the car. There are actually a lot of benefits of an internet utilised automobile auctions. In situations where there is a lot competitors hunting at and bidding for the automobile, it’s challenging to have a terrific deal simply because it drives the price tag up. You could invest $350 – $600 on a brand new list of treads, mounted and balanced.\nIs there an awful lot of noise or smoke emanating from it. This means that you might have someone readily available when there’s a issue and that you just is going to be able to speak to them when required. Possibly a new automobile appears like the clear choice, but you will discover some incredibly considerable rewards of buying a employed car, associated with price tag, maintenance and insurance, which need to be looked at by everyone who believes that new autos would be the improved alternative. Discover out just how much you’ll be able to purchase applied car for and then go to your vehicle dealer and let the games start, of course in your terms. It is typically advised that whenever someone is going for your acquire of some substantial value then he need to contemplate each of the elements prior to going for the deal. Dealerships, whether they are promoting employed or new cars, depend on persons with sales education, including graduates from and auto sales college.\nThe reason these vehicles are sold so cheaply will be the truth that storage costs will mount up and also the authorities in charge desire to move the cars on as speedily as you possibly can, so they are able to make some dollars in lieu of loose funds storing these vehicles and promoting them at some sort of later date. The only drawback to acquiring at auctions is the fact that you may have to take a look at more than a single time for you to uncover the exact car you’re seeking for. It could also imply the automobile has been wrecked in the previous and not repaired correctly. There are actually only a lot of new autos to be released each and every year. In the event you are not mechanically minded oneself it is in all probability a good idea to take someone, preferably a mechanic with you or far better nonetheless instruct an expert engineer to look at the car in your behalf. If you’re looking for any particular make and model, you can frequently discover it on the large amount of a new car dealership.\nGetting a applied car or truck it is usually a gamble, but it may also be the least expensive method to get the car or truck of one’s dreams when care is taken. When you have picked out the dealership from exactly where you will be shopping for your auto, it is time for you to go and acquire the vehicle. When it happens to be a person you understand, you can count on finding it at a additional reasonable price tag and also you also understand the car’s history – has it been maintained nicely. 75 percent, and government statistics inform us that the typical car or truck loan is to get a period of more than four years. Properly, that could occur, but it’s the very uncommon exception. Plus, you might get the assurance that comes with seeing the automobile in person, test driving it, and possessing it checked by a mechanic before you decide to obtain, even though buying online could not give you all of these reassurances. auto auctions Then let then know what automobiles you happen to be here to see, and don’t let them steer you away to an additional model alternatively. This way you will be in a position to note down any difficulty areas should you encounter any. Cost is the largest advantage when it comes to purchasing utilised cars. Start the study on the web before you decide to commence looking at cars for sale. You might obtain cars for sale by hunting inside the newspaper; on the other hand you desire to get a helpful automobile. Start off with some basic study in to the style of car and its history of troubles.\nAs soon as the papers are authorized it is time for you to sit back and take pleasure in your new ride. But if using the presence of a enormous crowd, rates may well jack up greater than the car’s fair market place worth. Are you currently in the market place for any new or even a pre-owned automobile. If every little thing is within very good condition and also the contract is properly termed, then, you are able to attest that low cost applied car auctions truly are excellent venues to purchase second-hand cars. They then ultimately have to tack on additional for the cost in order that they can generate income. Okay, now you understand how much funds you’ll need to the distinct cars you have in thoughts.\nNeedless to say, he may possibly ask you a charge for bidding for you personally. The web may be the location to look for your dream car or truck in a web based auction. You will find other factors thought about as well, however the reality is, used car’s Blue Book value is significantly much less in comparison with a brand new car. Such publications are helpful in giving you the values of lots of vehicle models during trade-in, which could allow you to in obtaining out whether or not you might be giving a good bid or not. To start with, seek out retail or wholesale values for your cars you are interested in, also as these which are out there in your price range variety. In this way, it acts as being a double check on the Kelly Blue Book cost, and tells you what people are really asking for their cars inside the genuine planet.\nNevertheless, these auto auctions are usually not restricted to auto dealers only and any individual together with the ideal sources can participate. Some folks also undergo voluntary vehicle repossession, therefore providing you far better deals. Nevertheless, using the financial decline in America this perception has fully changed. However, that dream isn’t very affordable or practical for a lot of car buyers. In case you are not knowledgeable when it comes towards the inside of the car or truck, ensure to take someone with you that can possess a quick look in the automobile and be sure all the things is within operating order. So, in the event you can not obtain a very good deal on the utilized vehicle within your paper, exactly where can you look.\nMoreover, take a family members member or even a pal who knows about cars with you when looking at the cars. Within the past, there were only a number of suppliers that you simply can depend on when it comes to cars. Repairs from little crashes could serve utilised cars fine for your rest of the lives, but it is important to make certain it was by no means inside a enormous collision. It will be very best for those who invest in a vehicle from somebody that you truly know, mates, members of the family, and colleagues are the initially men and women which you ought to consider shopping for a vehicle from. And cars may be bought for as small as 500 dollars. If you’re unable to discover a used car with somebody which you know then you definitely can verify out the neighborhood newspaper adverts. auto auctions You wouldn’t want to miss the most beneficial deal in town, would you. New companies ventured into this small business and current market place leaders presented new models. Next attempt all the power and climate controls around the dash. You could just go along and take your time in hunting in the cars and perusing via their components. Now appear in the bottom on the vehicle for just about any signs of rust. Do they inform their customers the history from the car or truck.\nA lot of dealerships also present trade-in opportunities. You’ve no automobile payments, so if you get laid off from your job or have other short-term economic setbacks, there is certainly no tension in the possibility on the auto getting taken through the repo man. A growing number of people today are acquiring employed cars in unique Japanese cars. They appear and perform on cars each day and ought to be able to spot a lemon a mile away. Auto auctions are outstanding platforms which sell high-efficient spare parts for the customers. Then discover out how long they’ve had the auto and irrespective of whether any repairs had been accomplished on it throughout that time.\nWhat this means is the fact that as soon as you uncover the automobile of your dreams the price on the cars sticker is all you spend. Vintage cars from the bygone era rekindle the history. In Canada, a number of provinces insist on the purchaser obtaining a Utilized Car or truck Automobile Details Package (UVIP) when purchasing a employed automobile. For the reason that the car value is significantly less the insurance premium is generally less. Bidders may take aspect within the bidding method from any a part of the world. You might at the same time acquire two or even 4 applied cars at the expense in the new automobile.\nTherefore, often, the cars are nevertheless in reasonably excellent situation. When you find yourself only serious about having a basic loved ones vehicle to use in urban areas exactly where the roads are substantially improved, you may just go to get a very simple station wagon or sedan from many well-liked brands available within the industry. You can find few websites which might be listing, literally, a large number of bank repossessed cars for sale on their own net pages. Throughout the process of purchasing such a car, the very first thing you shall take good care would be the proper inspection from the automobile. So that you can locate automobile auctions which are close to you, attempt surfing the net and search for government automobile auction internet sites. Don’t devote your challenging earned money unless you get the auto checked out properly.\nIn the event you paid $21,000 for the new vehicle and gave a down payment of $3,000, then you definitely have $18,000 left to pay. You might desire to come across a mechanic or a person who has enough know-how about cars to complement you when acquiring the applied car. These laws let the agencies to maintain property of these arrested for a assortment of crimes, specifically drug crimes. Before you decide to take into account buying a brand new car or truck, take into account what obtaining a brand new car will mean for your future transportation and monetary needs. You might also turn towards the trustworthy search engines like google and kind in “auto salvage yards” within your area and you will be sure you come up using a lot of benefits. Looking to get a used automobile to purchase but never seems to become in a position to come across one particular that may be within your means. certified used cars By generally, you would be ready to choose the most effective dealership for your auto acquiring. Immediately after you might have looked in the important components the only factor left to look at will be the minor stuff. By far the most vital fluids to check would be the engine coolant, transmission fluid, power steering fluid, brake fluids and also the oil. Now in case you can recall all the small particulars you spotted you may use these points to bargain a fantastic cost and purchase the applied car or truck with all the self-confidence that you just have avoided a lemon. At this point, you need to start out by adopting some practices. Owners who sell their cars eventually comprehend that selling their auto ‘as is’ might be harder in comparison with they’ve 1st perceived it to be.\nThere are numerous internet sites which might be devoted to listing the latest seized car or truck auctions in your region. You may locate them at different classified ads inside the newspaper. But even so, you need to nevertheless appear at the mileage of your car. In order not to let your newly bought vehicle fall prey to repossession laws, spend your dues on time. Check if any repairs are needed in the present point of time. One more innovation may be the one particular price no haggling concept.\nEven though you do not intend getting the car or truck on the web this can be an incredible starting point for tips on just how much the vehicle roughly charges. The earlier post discussed tips on how to uncover out the worth of one’s own car or truck too as any automobile that you just would like to obtain, how you can find all accessible vehicles in your area which you would like to see, and how you can arrange your financing ahead of time to save you dollars within the auto buying course of action. The car auction utilized to become a spot where people today stood around shouting out bids and arguing amongst themselves. The sad truth is the fact that the much more dealers like you, the a lot more they may be prepared to negotiate and please you. Even though getting, 1 should really be careful simply because this can be an unregulated market, with no warranties, lack of full details about a automobile, blind spots etc. In reality, as soon while you leave the dealership, your new vehicle is suddenly worth $1000-$2000 less.\nWhen there are many truthful and trustworthy people today available promoting utilized cars you’ll find also some “dodgy” characters and needless to say sometimes it is difficult to tell the difference. Becoming able to acquire a qualified pre-owned vehicle is one more benefit to customers. The secret is : because this is an extremely protected supply of revenue to the majority of vehicle dealerships and is not advertised towards the common public. It would be far better should you would take with you an expert in second-hand cars. Buying on-line you’ll be able to buy locally or come across sources of cars that you simply would not come across inside your normal yellow pages or tv advertisements. A great location to start with this, is always to figure out the book worth of the auto that you want to buy.\nWhen it comes to buying your car from one of your area’s applied vehicle dealers, there are a variety of added benefits. Lots of dealers will attempt to get you to get characteristics or add-ons that happen to be not required. These laws let the agencies to maintain house of those arrested for a wide variety of crimes, particularly drug crimes. The cash saved by buying a made use of car is for the reason that of depreciation (the loss in the economic value connected with an object as a consequence of its use). These savings could help you with big costs, like a brand new house or paying for the children’s college, or they might be put toward something rewarding, like a boat or possibly a luxury trip. You will need to also be informed about these car repossession laws. certified used cars For many of us, acquiring a brand new auto isn’t an each day expertise. Never trust just about every word they say and think about a third party mechanic to inspect the automobile you would like to obtain. Probably the most important fluids to verify are the engine coolant, transmission fluid, energy steering fluid, brake fluids along with the oil. Again, taking a friend along will be handy, particularly should they know just a little about cars, get them to verify the engine and all round condition of the car or truck before you decide to agree a sale. To begin with, set a minimum range for the sale or obtain. In most cases repossessed car or truck auctions provide fifty to eighty percent off the retail cost of used cars, this car auctions are thus normally flooded with utilized vehicle dealer along with the private persons by no means obtain a possibility to go to this automobile auctions.\nWhen you have your most effective deal, test drive that car thoroughly to make sure that it will certainly meet your needs and then get an independent mechanic inspect it to become sure of it really is mechanical condition. Be sure you’ve included tax, insurance and any accessories you may need on best on the actual cost in the vehicle in your price range. Because a bargain auto, is only a bargain, if nothing goes wrong with it. Look meticulously in the bodywork to discover any holes, dents or rust. They are able to sometimes tell in the event the car or truck has been within an accident ahead of, and even if the automobile has been repainted. Returning the car just after shopping for it will be pretty hard and thus any time you buy a single, you seriously must confident of its quality.\nOpen the doors and run your fingers by way of the inside from the door, once again, your looking for almost any paint the feels rough or bumpy. Many people are also excited to buy just about something that they’re able to afford. Be certain all the energy options function, never just assume they do. You permit yourself to commute each day within your hometown. When searching for a utilized car, the very first step will be to discover one particular for sale. When you finally located a car or truck that appears to match your specifications, you can find some factors you ought to verify to produce confident you’re actually obtaining an excellent, low cost car, not only a cheap auto.\nThe possibilities when it comes to acquiring your car incorporate shopping for from a private dealer, going to a second hand car dealer or searching through the quite a few on the web web-sites that offer applied cars. A further alternative will be to opt for a licensed pre-owned solution from your dealer. At this stage, remember that you are just seeking and trying to create comparisons. A new car or truck depreciates immediately within the initially handful of years and after three years, it is worth directly about 60-70% of the original price. In particular, a applied car dealership, with the diverse merchandise, needs to be certain that cars they obtain are completely inspected. There are several tell-tale indicators which are not visible for the untrained eye, however these specialists can simply spot.\nMost dealers, to create a speedy commission see prospective utilised car or truck purchasers and end up getting them to get one thing high priced which wont fit into their budget, even soon after the ‘low’ month-to-month plans. Hence, you may need to buy a vehicle from a brand that you just essentially trust. It is generally inside your ideal interest to take any utilised auto for your personal mechanic before getting instead of going in your love to the vehicle. Everyone knows that a brand new car lost 65% of its value inside the very first 5 years. As an illustration, a dealership will have fixed hours, so if any challenges arise, you understand exactly where and when to find the seller. In our culture if you never have enough revenue saved to buy anything fundamentally, you’ll find constantly a lot of hawkers of loans and credit to lend you the money to do so. used car finder Improving the auto would further result to added costs passed on to consumers. You could discover that financing enables you to get a automobile that may be extra suited for what you’ll need it for. You should be aware that not just about every low-cost car or truck you discover is often a superior deal. Some dealerships can even enable you to on your quest to find the right car. Moreover to this, you’ll most likely must order new car components and you want patience for this mainly because this takes time, which you could possibly not have so it will undoubtedly be worth your time heading off to a salvage yard. The very first point to consider when you’re seeking to get a employed vehicle is exactly what your requirements are within a vehicle.\nAny time you have examined the pre-owned cars meticulously you are able to decide in the event the price tag is proper or not based on the situation on the vehicle. Do not just jump around the first one particular you come across, you might find out later that you simply could have saved hundreds of dollars when you had searched a little longer. The course of action however takes a new twist when you have the money set aside or a financing partner but you simply can’t be in a position to determine the correct automobile to buy. The transmission fluid really should be red to purplish, not brown or black. Certainly not, it is possible to generally opt for most any type of automobile from the reputable dealer, from trucks and sports utility vehicles to sporty models, each foreign and domestic. This can inform you when the vehicle was within the accident, or broken in someway.\nFor those who have not auctioned yet, check out an auction 1st and observe the approach. You’ll be able to have unlimited access to databases with the most up-to-date news about automobile catalogue and price tag. Be sure that all the windows go up and down as they should, that the power seats operate in most directions, that the wipers, directional signals, horn, and electronics perform. Such publications are valuable in providing you the values of many car models for the duration of trade-in, which could assist you in getting out no matter if you’re giving a good bid or not. Taking your personal mechanic or somebody who is knowledgeable about cars, can help you realize the intricacies from the automobile you are keen on. Lastly, usually do analysis on which automobile is correct for you personally and your family when looking at obtaining a used automobile.\nIn the event you could get your new auto at an auction you could possibly pay what the dealer’s pay, at times less. When inspecting a car your self won’t take the place of a professional inspection, it will save you revenue whilst weeding out the very good options, from the ones that may perhaps not be suitable. Your down payment is usually ten %, but should you place much less money down up front your month-to-month payments is going to be higher. What about some a lot more creative strategies to discover an incredible, low-priced utilised vehicle. A huge number of cars are seized every month within the United States of America. Talking about depreciation, employed cars are certainly not impacted by it as substantially as new ones are.\nThat way if they have received new shipments and hadn’t gotten about to listing them, it is possible to be 1 of your initially to look at it and very possibly buy it just before everyone else does. Be certain that the brakes are examined, which consists of the brake shoe, brake pad, rotors, drums and any hydraulic parts. Check the VIN# stickers all about the vehicle to ensure that all components are genuine and usually are not obtained from other cars. To get a very long time, only car dealers and car or truck brokers knew regarding the existence of these car auctions and they also had been able to make a killing out of those purchases. You’ll be able to also endeavor to get in touch with for some information from the regional government organizations. For anyone who is considering of obtaining a applied vehicle then the internet can be a pretty valuable resource to you. used car finder Unless you’ve got pretty deep pockets, these options make the vehicle more pricey and they may not add a lot value to it. Be sure you make a thorough visual inspection of every single car that meets your criteria and make notes whilst you do so you’ll be able to bear in mind what your impressions have been about every single auto that you simply looked at. As such, now that you get an idea of a few of the homework you’ll will need to accomplish before you basically buy a low cost (or any) vehicle, exactly where can you obtain one particular. It will be the functionality with the vehicle that determines some unique options. Then you quit, take a deep breath, because there is certainly that darned dream car yet once again. The first and most important purpose is that you don’t enough income for any new car and also you don’t wish to borrow any cash mainly because you don’t believe you may afford the month-to-month payments.\nMake an effort to uncover their numbers in the yellow pages of one’s phone directory. You have no vehicle payments, so in the event you get laid off from your job or have other short-term financial setbacks, there’s no anxiety from the possibility of the automobile getting taken from the repo man. Are you currently inside the industry for a new or a pre-owned car. Register and inspect the inventory list to seek out out the cars on the lot. Qualities dealers supply lots of comfortable possibilities to take the uncertainty out from the purchasing method. Keep in mind that the older the auto, the additional probably you might be going to have some big repairs carried out inside the very first handful of years of applying it.\nMotor cars are registered this way, to assist prevent them from being stolen and enabling the trading of cars to be taxed. The initial test drive you ought to merely be checking the general fit of the automobile. The engine and transmission must be in fantastic condition. Obtain out whether or not the type of auto you would like has any widespread difficulties or difficulty spots. Getting a automobile inspected will not be guaranteed to stop all worries, but it’s your ideal bet to stop challenges afterwards. On the other hand, when you take your family of 7 on trips when towing your boat, a Suburban would be a great car for you.\nAnd staying in control whilst you buy is certainly essential to having the top deal attainable whilst you shop. Finally, take any made use of cars you may invest in for a test drive and observe they really feel. Plus, when obtaining from a dealer, you can not need to have to possess many meetings with people today you don’t know and go through the process of having the car inspected by a mechanic, and test-driving the vehicle over and over again. If these two usually do not match, then there is a possibility that the vehicle was just re-assembled by auto rebuilders. If you aren’t mechanically minded your self it is possibly a superb thought to take somebody, preferably a mechanic with you or improved nevertheless instruct an expert engineer to look at the car in your behalf. If it appears truly grimy it is really a superior indicator that the owner doesn’t take substantially time for you to look after the car.\nWhen it comes to acquiring a second hand automobile from a private dealer you’ll find distinct guidelines in comparison with if you bought from an established dealer. In the previous, there had been only several manufacturers which you can depend on when it comes to cars. Do you see an clear paint line from a prior repair. Organizations that sell second hand cars in addition have official internet sites. You could possibly not have the ability to tell a lot this way but you are going to at the least get an concept in the event you could must modify hoses, battery cables, or maybe if there could be a leak somewhere such as coolant or oil. You’ll find directories on the web where you will be in a position to search for a place close to you. online car auction You would not choose to miss the most effective deal in town, could you. Moreover, a dealer tends to make a profit for producing use of a particular bank, either by marking up rate of interest of buyers or by deciding to make use of the bank to get a finance application more than other folks. Once you determine what your automobile is worth, and what car you want to purchase and what it will be worth too, you could possibly start purchasing. There are actually two selections for you which include the cash payment along with the installment terms. Whenever you obtain a car or truck that charges less, it is easier to qualify to get a loan. An alternative negotiation technique is usually to let the dealer realize that that you are shopping for the car right away.\nYou will discover also websites which specializes in auction cars and frequently has incredibly low costs. Per week or 2 of automobile purchasing can drop your credit score10+ points. Get as close as you can towards the actual worth on the automobile that you simply have established by performing your advance analysis on line. Some have atrocious reliability records, or perhaps worse, are previously wrecked vehicles, cheaply repaired and sold as superior cars. So exactly where do you try to find utilised cars and just how can you be certain you happen to be finding a fair and affordable deal and never a lemon. Believe about what kind of computers people had been working with just five years ago.\nWill you’ll need to finance your car or do you’ve sufficient funds saved to purchase it outright. In all likelihood, you ought to in no way pay the Kelly Blue Book retail worth to get a utilized automobile. If a automobile has been in a collision it will be worth very bit much less to any future buyers, maybe even up to 30% – so maintain that in thoughts. You could possibly be forced to avoid that high-end package around the new automobile due to the fact it rates you out from the acquire. To start off, you might make use of the newspaper, do a preview from the auction, spot out cars that you simply find fascinating, research regarding the cars on-line after which go back to location your bid. This only proves that savings and convenience this system is supported through the getting public.\nIn the event the seller has absolutely nothing to hide they may probably allow you to take the automobile to your mechanic for any “check-up. When inspecting a automobile oneself will not take the place of an expert inspection, it will save you money while weeding out the excellent alternatives, in the ones that may well not be appropriate. These issues, while minimal from what it could seemed could up to bigger amounts and savings afterwards. Sadly, that dream is not inexpensive or sensible for many car buyers. Primarily based on this, you are able to be certain that the cars seized will not be your ordinary assortment but the flashy, jaw dropping type. You are going to save some revenue one example is, by foregoing a Honda for any Nissan, or skipping a Toyota and landing inside the driver’s seat of the Mazda.\nAnd, if they’ve an individual coordinating shipping, that is certainly room for somebody from dispatch schools. You will find a great number of automobile auction web sites on the internet where you could possibly get a fantastic deal out of a luxury vehicle or even the sports car or truck of the dreams. There are actually web pages on the internet which gives a simple on the net look for utilised cars buyers on government auto auctions in many countries, states and cities. Nevertheless, there are some points you’ll need to consider before you buy a made use of vehicle on-line. Daily, thousand of cars are becoming seized or repossessed and these need to be sold off rapidly as it would involved an enormous quantity of dollars simply to store them. Look around neighborhood dealerships, your neighborhood paper, on the net, and even off with the road if you are out driving. online car auction At the end of the day, you may need to execute sufficient study on the subject before you make a acquire. Also, you can minimize charges by choosing a mechanic that you will use in the future for routinely scheduled maintenance and who may possibly take into consideration providing offer you a specially reduced priced for the inspection. If they may be wavy or you could possibly see apparent imperfections in the paint, chances would be the car or truck has been damaged and repaired at some point. Several of the smaller lots supply financing, have salvage title cars for amazingly low prices, and usually offer you customized service. The opportunity gives you a chance of owning what you want. The primary benefit is convenience but it will certainly have a lot more interest if the calculation is completed completely.\nOn the day with the auction itself, be early at the venue. If it is, there’s a blown gasket or an much more really serious engine difficulty. Simply because a bargain vehicle, is only a bargain, if practically nothing goes wrong with it. If the oil is brand-new beware, not several persons will alter the oil on the car or truck the day ahead of they sell it unless they’re trying to hide something. Such vehicles are sold at affordable rates but they still might be really expensive. In this article, we give you some ideas on how it is possible to stay away from acquiring a rebuilt wreck.\nIf you are purchasing a professional pre-owned car you also have the selection to buy an extended warranty. That won’t be an cheap auto, but it may well become a low cost a single. Persons who don’t know the initial thing about cars might end up buying a second-hand car or truck that looks new around the outside. Should you acquire the new vehicle for twenty thousand dollars and finance the obtain at five percent interest, then you are going to pay a complete of twenty one thousand dollars before you decide to own the car or truck absolutely free and clear. List down the Vehicle ID numbers of your cars that you simply seem to become serious about. Automobile makers have produced a point of creating a a lot more trusted and enduring car over the years.\n” Only 5% of employed cars are actually in exceptional situation. You will discover some varieties of cars which are in high demand. The subsequent step is usually to visit your nearby magazine seller, and get copies of each of the various car promoting magazines. A whole lot of rot, in particular to structural places in the automobile exactly where panels and sections with the vehicle come together could indicate the automobile is not safe to push. Stay away from cars that have an excess amount of body function or that you are risking a auto with important structural issues. You will be in a position to find an excellent car that lasts although spending significantly less on it.\nAppear at the old girl to be confident you genuinely want to take her home. On the other hand, when you strategy to remodel the car or truck or sell its components, all these troubles don’t matter. There are internet sites on the net which delivers an easy on the net search for employed cars purchasers on government automobile auctions in a variety of countries, states and cities. Endeavor to research on these cars on the net to have a better view of them ahead. They should really also be capable of give you with all the vital documentation relating to the cars history. When it comes to shopping for applied cars, persons want to discover something that fits their requirements too as their spending budget. find used cars If a single includes a fixed price range, it may possibly be really hard to have a automobile of the selection. Once you have established the vehicle looks to become cosmetically genuine and that the situation is as you’d anticipate for your cars age start out to appear at the mechanics on the car or truck. Extra solutions and help could be located with employed automobile dealerships. They may have been repossessed or may have been the home of a felon or cars that the government merely doesn’t want. After you have an comprehension of just how much you ought to be paying for every single automobile, appear around on the web to discover autos that happen to be inside your price range. Despite the fact that owning a employed auto can save you dollars, without thorough investigation you could end up spending the equivalent of a brand new auto, maybe much more.\nThe dealers may possibly also attempt several underhand techniques to ensure that they get the repo cars buy. Also, what sorts of capabilities are included around the interior. Increasingly more people today are acquiring used cars in unique Japanese cars. Often, new players usually do not have the maturity and experience in giving quality car or truck units. New cars shed most of their value in the course of the initial two or three years. It is really a great concept to take the car or truck around the roads exactly where you drive every day before you make the final choice.\nWhat this implies is that when you locate the automobile of one’s dreams the value on the cars sticker is all you spend. Early birds surely get the improved catch so do so and be privileged to select from each of the cars for sale. If you have found a “bargain” or even a vehicle you like the appear of go verify it out. Lots of of these cars have less in comparison with 80,000 miles, and it is frequent to seek out them with below 50,000. Check that the lights operate properly low and higher beams, brake lights, turn signals, horn, air-conditioning and heating program. You should buy a car or truck that has an excellent deal, no accidents, and has been effectively maintained.\nWho’s on their own technique to becoming in a position to often buy nice cars. Some even are luxury cars that are auctioned for the public at drastically extra inexpensive and affordable rates. You need to know that car or truck dealers are in the company to sell their goods. The very first step to think about, is irrespective of whether or not you have a automobile to trade inside the initially location, as there are actually many diverse approaches that you can pursue to have the most beneficial deal. Subsequent, ask the person you will be purchasing the vehicle from or even the salesperson at the dealership a lot of questions. To the bank to avoid storing the several cars which have been repossessed and make up for your lost cash, these cars are auctioned off straight away which make it simple for some lucky people to get pretty new cars and avert becoming taken advantage of by auto dealers.\nThe initial is the fact that cars after bought and driven off quite a bit right away depreciate. That could show you no matter if it is ever been declared a total loss, either via natural disaster or even an accident. If it appears that they’re wearing considerably more rapidly on one side of the tire, that may be an indication that the front finish could will need operate and also you should really also aspect that in to the auto value. The mechanics will normally verify the door jambs or car or truck panels if you’ll find parts which have darker or lighter paint. Then commence the automobile and check that the air conditioning blows cold, and the heat is hot. What should you decide you might be unhappy together with the vehicle one particular year down the road. find used cars Following that look in the coolent and it must be filled as much as the brim. VIN’s hold quite a bit of information regarding the automobile and this can provide you with a superior thought of the cars history. In case you do choose to get this automobile then you definitely have to be prepared to be around the lookout for these parts after which ask the seller to subtract the cost from the promoting price from the auto. In this day and age state and federal laws prohibit dealers and people from promoting cars that require a lot of repairs to unsuspecting purchasers. The problem with them, even so, is that they have millions of other folks all hunting for good utilized auto offers there too. Today, the number of cars seized by the government have grown exponentially towards the point where the federal government cannot afford to maintain and preserve each of the seized cars since it cost revenue.\nA number of these cars are commonly flashy sports cars and luxury cars which most of the people can not afford to buy at the showrooms, this cars are properly maintained automobiles and most of the time they’re constantly in very good condition because this is the location where banks and government authorities are most keen on when within the procedure of seizing this autos. These can increase the resale for you personally later and shed light on any previous troubles. Get as close as possible to the true worth of the automobile that you just have established by performing your advance investigation on line. In addition, include things like in your price range an amount to cover an inspection on the automobile by a respected and licensed mechanic, preferably 1 who is acquainted with the make of car or truck you should obtain. Applied car dealerships cannot legally sell you a broken automobile, that is not completely true when getting privately. In the event you are searching for any vehicle but not quite ready to invest a fortune on a brand new one, then purchasing good made use of affordable cars for sale might be an eye-catching alternative for you personally.\nThis can be mainly because credit scores are universally utilized in qualifying buyers for new automobile purchases. The following step will be to understand concerning the particular person that’s promoting the automobile; you can do this by asking queries. Then go to the section in the magazine that bargains with the auto you will be seeking for. By which case, it would not matter if it has clocked a lot more miles. Taking your personal mechanic or somebody who is knowledgeable about cars, will help you have an understanding of the intricacies of the auto you’re keen on. With almost everything that may be feasible and offered, locating a very good vehicle and enjoying it is going to be an easy job.\nAn excellent auction should possess a period for preliminary inspection and also you really should surely go there to become positive that the auction will be worth going to. This is because new-car dealers only sell the cream from the crop of applied cares. The majority of people function hard and they require and want their cash to work challenging for them. You will find several alternatives to have the really finest invest in on the used automobile. The purchaser must ask the dealer to view it and if it isn’t readily available, then you definitely need to speak to the dealership or repair shop exactly where a lot of the operate was performed. If these are not in superior functioning condition, it may cause an accident when you find yourself attempting to push it on a rough or bumpy road.\nWhenever you make trips to the airport with your own auto, you’re forced to spend for airport parking when you are out of town. That is definitely the basic cause why Salt Lake City taxi services have grow to be so well-liked. With so much irritation waiting inside the terminal, at least the trip to and from it can be quick and pleasant. The drivers may also be skilled and really well-trained. These cab drivers are well trained and are strictly on time given that they monitor website traffic and as a result know the very best routes to take. salt lake city taxi Not simply that, you won’t be wasting your valuable time in waiting for any taxi in the bus stop. Cab services also endow you the added benefit of calling them up from virtually anywhere all through the area. Vacation taxis are also in demand in the course of Holidays due to the fact folks wish to go areas and go to buddies and relatives in distant places in London. Out of that funds count out the tip and give it towards the driver. You must wait in the taxi line to have to where you want to go.\nYou are going to will need to establish the amount of comfort derived from hiring the airport taxi. This can be the cause why you always need to have to check their prices before hiring them. When in a foreign town exactly where you don’t speak the language, collect small business cards out of your hotel or possible destinations to show taxi drivers exactly where you are headed. You may feel the need to have to employ a Salt Lake City taxi service if you check out a new area as well as to travel round your personal city for several factors. In the United states of america some fifty million or so men and women reside with varying degrees of disability, but they still pursue active, fulfilling lives.\nConveniently situated at just about every significant airport, you’ll find an array of various commuter choices. Based on where within the area the airport is positioned, often taxi is not going to be the ideal decision. You also need to have to know that an high priced cab service doesn’t mean that you simply will experience the top, that is why you nevertheless need to look at the 1 that you just will be hiring. Besides becoming extremely crowded, public commutation like trains and buses is usually time consuming as well. Taxi companies will present their service for you in a fixed rate, as well as the driver won’t be charging you with extra charges.\nHere are some tips, tricks and general advice on why taxis are an awesome method to travel, what it is prefer to take a taxi and ways to prevent acquiring ripped off by sneaky cab drivers. Most of the people who travel via air and land in one more city normally encounter a number of complications in acquiring a Salt Lake City taxi service. In significant metropolitan places, taxis are known to use over a very first come, initially serve basis together with the client that is noticed being the 1 that receives service. A taximeter is device that helps the taxi drivers in calculating the appropriate quantity to bill a passenger of the service it offered. They’ve a great thought in regards to the traffic circumstance and may therefore take you through much less crowded streets in order that you attain your destination on time.\nSo the prefix taxi- in the name taximeter came from the Latin word taxa which meant charge or tax charged to get a service. This is where the value of a Salt Lake City taxi service comes in. Immediately after booking, packing then comes the turn of traveling for the airport or station. Protected and courteous drivers is going to be dispatched as soon as the request is made and deliver passengers to their location of option using the quickest and most handy routes out there. If you’d like to have a limo to your destination then this will imply you have to shop around to get a enterprise that provide these specifically. salt lake city taxi Not only that, you won’t be wasting your valuable time in waiting for a taxi in the bus quit. This really is especially true when it comes to employees that take care of shoppers. Moving around from 1 point to a further may be an enormous problem, specifically if one resides or functions in a area center exactly where targeted traffic congestion has reached mammoth proportions. Airport shuttles give child car seat as it is difficult for parents to carry one particular with them. You may agree to drive for any fixed price tag, or a metered one, but be sure to obtain details about the expected cost and examine it with previous estimations you got from your study.\nSalt Lake City taxi services are readily accessible in every city with booking offices and booths located close to the airport. Similar was using the communication; it employed to take plenty of money and time for you to connect calls. A number of the extra up to date operators basically provide a web-based interactive fare calculator, as an added convenience. For your sake of comfort and avoiding possessing to wait for lengthy you can decide on Salt Lake City taxi services which will be readily readily available once you arrive in the airport. You need to also determine what location of town or which neighborhood you’re heading to plus the common direction you’re expecting to go.\nGoing through this short article can give some insight about ways to opt for a taxis service for travel and how. Taxi drivers in all probability aren’t in it for the cash; they are not rolling, nor driving, inside the doe. The pricing structure is in all probability by far the most critical thing that you need to have to verify. But you’ll find considerable differences once we look at them each side by side. Having said that, you’ll find some Salt Lake City taxi services which are charging far larger than what other Salt Lake City taxi services can give you.\nFrom being aware of how much to tip to knowing what to perform when you have a complaint, riding in taxi cabs can involve walking a fine line among having from point A to point B or acquiring asked to get out and walk. A great chauffeur will always make an effort to drive in a way that makes you really feel comfy and protected, in order to earn your word of mouth endorsement or repeat small business. The driver can take on the duty of driving through website traffic and provide passengers as close towards the front door as possible. These cars were electric and not gas powered first off, but folks have been opting to spend for a ride in a automobile as an alternative to a horse and buggy at that time. Some corporations offer appealing group discounts which make it achievable for people today that are travelling inside a group to split the fare.\nRegardless of exactly where you reside, there is a taxi organization inside your location. This means that if you hired a respected taxi organization, you will not need to commit more than exactly what the organization is going to be charging you. Use your own judgment to seek out out if this particular person had a genuinely poor encounter or is out for blood. Secondly one will not must invest a good deal amount of time in understanding the routes. There’s typically a charge for more than one passenger, and youngsters below five years of age travel at no cost when accompanied by an adult. salt lake city taxi The standard vehicle utilized by Salt Lake City taxi services within the United kingdom is a lot roomier as well as in some methods more convenient as compared to those utilized by Salt Lake City taxi services within the United states of america. Some individuals assume that it really is pricey to make use of this kind of service, but it’s certainly not correct. Regardless for the taxi that one particular books, a very good taxi ought to enable entertainment function as well as ensure the passenger’s security. This will likely make sure that you will normally get the top worth for your funds, and that you simply will likely be able to save income in comparison to commuting on your own. Nonetheless, it doesn’t mean that picking any Salt Lake City taxi service can help you save income.\nNote, on the other hand, that while lots of organizations specialise in airport solutions, they are practically generally complete service taxi firms with nearby drivers operating around the clock each day of the yearin your town, so that they’re able to take you wherever it is you have to go; locally, or nationally. You get the opportunity to arrive in the entrance with the terminal, station or hotel with numerous time for you to check in. When within a foreign area exactly where you don’t speak the language, gather company cards out of your hotel or feasible destinations to show taxi drivers where you’re headed. Be sure to provide them with each of the appropriate particulars: If you book your airport taxi you may need to offer them your flight reference number at the same time because the occasions of one’s departure on leaving and arrival on return. In the event the town just isn’t huge you may obtain you may have to call the Salt Lake City taxi service straight or ask your hotel to arrange this service for you to have picked up and taken to your location.\nProviders also conduct background checks to promote that clients can really feel safe with the drivers. This involves the price of hiring a taxi, tariff price, travel distance, waiting time in traffic jams, and at the curbside for you personally. Shuttle solutions are paid as being a flat rate, where Salt Lake City taxi services are paid according to a formula of time and distance via a meter. One more worst case scenario will be jetting off on the extended distance flight and obtaining to wait for more than per hour to obtain a ride for your destination. Though within the previous it may very well be additional highly-priced, there are several services which can be adopting wise cars.\nIt does not take significantly time, booking on line will provide you with an insight into the company’s profile as numerous clients give their testimonials around the company’s web page and rate their service. Additionally, limousine operators are very competitive. The cost may also rely on no matter whether the travelers are employing limousine. They will not most likely have the ability to provide you with an exact number – unless they’ve flat rates – however they can quickly provide you with a ballpark figure. Geography plays a big function within the price and availability of Salt Lake City taxi services.\nAll drivers undergo mandatory drug testing also as thorough background checks to create positive that they have no history of criminal activity or drug use. The first issue is that this is a business that can expand while you succeed. They’re operated by qualified, expert educated drivers. Taxi cabs became a prevalent look within about every single town. The first thing you will notice about acquiring a Salt Lake City taxi service in the airport is that you’ll save dollars. salt lake city taxi Plus when you come across a ride it is in their hands whether or not you arrive for the airport on time or not. You and your family members could possibly get down at any spot you wish and acquire back on the taxi in the same spot. You no longer have to appoint a designated driver or run the danger of driving under the impact, when all you need to perform would be to get in touch with a taxi. If you are in a hurry, a taxi can usually get to you to where you should be within a speed of light, but in the event you have the all time on the planet to wait for any particular person out his property, you may employ a taxi to wait with you. Slightly research can go a lengthy way and will help you commute improved.\nYou may contact a Salt Lake City taxi service ahead of time that can take you towards the airport on a fixed rate. Driving in cities is unique from taking the vehicle for a extended ride. As far as acquiring house from the airport, they may be equally easy, whilst you do not have to wait for your ride. There are actually instances when it is inconveniencing to push your car inside the town. All automobiles are well-maintained and comfortable supplying you using a traveling experience like in no way just before.\nMoreover to a great looking and nicely functioning website, your site will have to be able to being found on the planet wide net. You won’t need to worry concerning the extra expenses that you just need for the automobile. You will find a lot of men and women complaining of what they claim as the exaggerated cost of taxis. You could look at calling a reputable taxi firm that may be in a position to arrange on their pick as much as their home or hotel. They’ve a variety of skills as in comparison with the others.\nA few of the five star rated hotels in San Francisco Bay Area are New Intercontinental, 4 Seasons, Ritz Carlton and Mandarin Oriental etc. Typically, fares for these kinds of smaller and unusual taxis is much less in comparison with you would usually pay inside a sedan taxi, but more in comparison with a public bus. Odds are, you’ve been in 1 of these autos at some point or an additional all through your life. However there is something about airports that’s extremely stress-inducing for the vacation and enterprise traveller alike. Appear around and obtain in touch using the taxi driver whose appearance and vehicle offers the largest self-confidence to you.\nYou can find providers that hire out their autos with skilled drivers and you’ll find chauffeur cars often outdoors the airport in conjunction with ordinary airport taxi. Costs are generally coated in US dollars and many of these taxis are mini-buses with ample space for you and your traveling party. You should be the very best paying Salt Lake City taxi service for the most effective performing drivers and dispatchers. You won’t be staying inside the region for lengthy, so you’ll need to produce every minute count, in particular while traveling. The Salt Lake City taxi service must also have their price meter placed in a location exactly where the passengers can study it or it is possible to attempt and negotiate a price tag before your journey, this really is a really great idea for anyone who is going for the airport by airport taxi so you’ll find no shocks when you arrive at your location, this can be a really good thought for anyone who is in a foreign nation or perhaps a town through which you will be not familiar. salt lake city taxi A service can be beneficial if someone is with no a vehicle though it is being repaired. Taxis in London are particularly made for vacationers like you. We within the taxi industry are genuinely blessed – we don’t have to do anything for it. At the end with the event, you may not have to have to concern oneself using the security of your guests as they go home. While you should get the top value for your revenue, you will discover instances when paying just a little added in exchange to get a better service is much more advisable.\nYou’ll would like to locate an information poster behind the driver’s seat. Hence, usually do not hesitate to ask the business how extended they have been in organization and confirm together with the necessary authorities. It is as a result essential for you, when creating a reservation, to ensure that you ask for a automobile that is certainly large adequate for your group or your luggage. At least that you are not tied to any service strategy like other businesses and 1 poor cab ride can’t hurt you. The initial issue you should do is go on the net and seek out a Salt Lake City taxi service directory or use Google “Salt Lake City taxi service” then by “your area”.\nThe prices chargeable vary amongst different taxi firms. You surely know when you are going to need to employ a taxi and consequently before you decide to make the trip you’ll want to conduct some study on the web and uncover out about your solutions. If the cab driver was exceptionally great – if he took a short reduce to obtain you to the urgent meeting, for instance – then tip him far more. Their drivers have a sound know-how concerning the diverse routes and as a result will take you for your destination inside a smooth and practical way. Never let yourself be late, ensure that you are having the most effective option to move forward, that is quite a few times as straightforward as hiring a Salt Lake City taxi service.\nAirport shuttles takes you to any hotel located in San Francisco be it in Union square, fishermen’s wharf location, financial district, Lombard Street etc. Obtaining a taxi towards the airport can turn out to be a daunting job. It is possible to avail them for any quantity of solutions which includes hospital visits, sightseeing trips, evening out chauffer solutions, shopping trips as well about and fro rides in the airport. Have a look at the excellent of services that they offer too because the value they charge you. So when a newer service within the ground transportation industry, like the airport shuttle service comes around the scene, it is usually difficult to fit it into what we currently know.\nAs much as date taxis are beneficial in emergency cases, like when 1 wants to catch a flight urgently. No matter where you reside, you constantly really need to have a Salt Lake City taxi service inside your list of contacts. The operate is accomplished in appropriate order and nicely planned manner. In airports, train and bus stations, there are typically taxi ranks, exactly where a line is formed and folks get a taxi over a first-come first-served basis. This will likely offer you reassurance, leaving you the chance to concentrate on other vital points and take pleasure in your self. salt lake city taxi If you are at a significant airport you’ll find plenty of Salt Lake City taxi service alternatives accessible for you personally. They’ll choose you out of your preferred location and can enable you to travel around conveniently at any location. Having said that, not every person is in a position to discover such excellent holiday web-sites very very easily. Folks requiring transportation within a hectic airport who do not possess a reservation, are usually not allowed to have into a shuttle. You don’t have to waste your time in understanding the routes that need to be taken to be able to attain your location.\nA great deal of men and women believe that driving their own vehicle is substantially superior as compared to hiring a taxi for the reason that for them, it is less expensive and much more handy. The airport Salt Lake City taxi service should really transport you in the airport to anywhere within the city. To produce sure that you’re on time and will not be late to your business occasion, these Salt Lake City taxi service firms take particular care in taking the routes and roads with much less visitors at that time from the day. Extended security lines, charges for baggage, difficulty in changing tickets can all make the airport encounter stressful. If he goes out of his way for you, you ought to compensate him for that.\nDrivers will have to stick to the charges displayed, and also the passenger should really be able to see the meter constantly. People today have realized that these are much more reputable and punctual. There’s the economy class and depending around the price range one particular also can contemplate lower classes. Bear in mind that enterprise that takes seriously its presence around the Web, in all probability also performs its services appropriately. A superb taxi company should really provide you not only punctuality and reliability, but in addition ease of booking.\nYou just need to fill in certain information within the on line form. Much like each other trip is planned, you should also prepare for transportation that can take you from the airport for your necessary location. They’re going to act as being a guide in giving you information regarding the local delicacies and other attraction. A taximeter is device that assists the taxi drivers in calculating the appropriate quantity to bill a passenger from the service it offered. Professional drivers will pick you up proper in front of your household and take you directly towards the curbside on the airline you have chosen.\n“Belgrade Taxi”) and make an effort to recall some names, or at the very least logos and colors. You’ll be able to resolve this challenge by booking airport shuttle service on line. Those who would previously have driven their very own motor vehicles, or made usage of public transport like buses, trains or perhaps the subway, now obtain themselves largely limited in their alternatives. Those which are utilizing intelligent cars are not paying lots of cash for gas, hence passing down the savings for the customer. Any time you book, your corporation ought to be able to tell you the precise expense involved so you understand what your budget is before leaving. salt lake city taxi A friendly and courteous cab driver will lift all suitcases into his trunk and perhaps chat about that day’s situations in the departure point. Tourist as well as other locals are being victimized by these hidden charges and you will not possess any option but to spend of these charges. Baby auto seats are designed to safeguard your youngster in the event of a crash. If you’re worried about how you are going to travel from airport to area hotel. Traveling in a taxi from a Salt Lake City taxi service will be comparatively low cost as compared to moving in the independent taxi owner or moving in private vehicles.\nBy no means prior to has saving funds been so quick, especially when it comes to receiving a ride towards the airport. Attempt using some key search engines to locate a Salt Lake City taxi service that can offer you the service that you just need to have. Also, limousines give the privacy that is definitely not normally a a part of the taxi knowledge together with a host of other amenities which make them a substantially a lot more pleasurable selection. At the same time they must double check your particulars to make sure you have produced no errors. Hiring an expensive cab service is extra of a preferential selection.\nA single hires a taxi rental service for a lot of occasions currently. Lots holiday goers are put off from the concept of making use of a Salt Lake City taxi service because they are misguided and believe the price for service of this type is fairly higher. Despite the fact that you might be experienced using a Salt Lake City taxi service in your country, it is specific that you really feel a bit differently when you do it inside the foreign nation. All of the measures have to be taken to make sure a proper transportation service. For those travelers unfamiliar with the layout on the airport or the approaches to it, a luxurious cab ride within a comfy seat can spare them an anxious search for the correct exit or location to park.\nYou desire a service that is a rapid and uncomplicated ride for you personally after you never have another choice. Just make sure that your selection is likely to make your keep inside the region simpler as well as your travel significantly quicker. Definitely, there are not a great deal of worse points as compared to finding off of the long flight, only to have to wait one more two hours to hail a taxi for any ride property. Arrangements can typically be completed either by phone or online. They’ve a good thought in regards to the traffic situation and may therefore take you by means of less crowded streets to ensure that you attain your destination on time.\nHaving a little bit of money and time spent promoting and hiring, you could possibly be up and operating as soon as your company license clears. You could solve this trouble by booking airport shuttle service on-line. You save a lot of difficulty and time by hiring a Salt Lake City taxi service. Those which might be utilizing smart cars usually are not paying a lot of revenue for gas, for that reason passing down the savings to the consumer. Finding this fourth choice is a thing far much better as compared to most people realize. salt lake city taxi Airport shuttle can carry nearly 7-10 persons in a time. Long-term parking is usually a option for some people, but rates for even a week-long remain at such a facility can mount in to the a huge selection of dollars. When a single gets on-line, one could possibly get sites that market these invaluable Salt Lake City taxi services. When producing your reservation, a reservation controller will operate with you to make confident you get a car huge sufficient to match your group and ensure that some other requests that you may possibly have, are catered for. The advantage of the taxi will be the door to door service that it provides and at some sort of time which suits the person, who’s no longer based upon the vicissitudes of timetables.\nBecause of globalization and much easier suggests of travel from one particular corner from the globe to an additional number of vacationers and travelers has enhanced considerably. Many individuals just do not need to be bothered with driving unless they may be out within the countryside. Just as in anything, there are actually trustworthy and particularly excellent taxi drivers out there, also as jerks just out to rip you off. A great deal of taxi and private employ companies look incredibly entrenched in to the old strategies of marketing their regional enterprises. Prepare a modest alter as well, because taxi drivers seem under no circumstances to possess it.\n15 % is definitely the going price for Salt Lake City taxi services when you’ve got an average ride. In 1915, the Yellow Cab Company started driving passengers through the area of Chicago as well as a Chicago Salt Lake City taxi service that continues these days will be born. All with the airport Salt Lake City taxi services are vying to give essentially the most competitive prices within the business enterprise, in your area, so shopping around and so it is sensible to complete a little bit bit of shopping about for the top deals within your area. When checking a Salt Lake City taxi service, you need to verify first the solutions. Shrewd taxi operators have for some time understood that the Yellow Pages is fast becoming replaced by search engines like Google as a way for nearby consumers to source local goods and solutions.\nBut on some terrible days when you’re running late, you could come across no taxi and it is truly urgent to reach the airport in time or you miss the urgent flight. Having angry, frustrated, or huffing and puffing within the backseat isn’t going to take care of the jam that is blocking website traffic. The driver will take on the duty of driving via targeted traffic and provide passengers as close for the front door as you can. Persons with practical experience riding in Salt Lake City taxi services are generally asked just how much they should tip the driver and the way they need to tip him. If you’re looking for an optimal airport Salt Lake City taxi service, resorting towards the world wide web is usually a sure-fire strategy to get a single that comes with rates and services that may enthrall you.\n“Belgrade Taxi”) and try to recall some names, or at the very least logos and colors. You may solve this difficulty by booking airport shuttle service online. Indeed a good number of cabs you may see in almost any town are spacious, impeccably clean and effectively maintained. Those that happen to be utilizing wise cars will not be paying a whole lot of revenue for gas, consequently passing down the savings to the customer. You can get a great and desirable price tag if only you need to do your booking properly ahead of one’s date of travel. salt lake city taxi You’ll find no rail solutions obtainable; you might only located a countable variety of buses that run for the town center, every day. They may pick you out of your preferred location and will assist you travel about conveniently at any place. When there are actually fantastic numbers of travelers flying in and requiring taxis to have around for meals and entertainment, the type of persons to get a taxi at the airport is longer, and also the type of taxis in cue to pick them up is shorter, so the wait may be quite a few hours, and is somewhat unpredictable. Essentially the most important explanation for individuals traveling inside a cab is o take pleasure in the ride. It’s essential to not accept the first cost you get from the airport Salt Lake City taxi service.\nIn the event that of hiring an independent taxi, one particular may have to pack up all the things, then move for the road and wait for a taxi, thus losing a great deal of amount of time, which might be applied for some crucial perform. We’ve all faced such a circumstance no less than once in our resides. Similarly, although taking a cab is usually hassle-free yet some cab businesses charge greater than the reasonable fare and passengers may perhaps find themselves in disputes when time for payment comes. Plenty of taxi and private employ corporations appear quite entrenched into the old methods of marketing their regional organizations. Regardless of whether you reside in the far side of the zone or the near side from the zone it are going to be the identical price.\nGoing through this short article can give some insight about tips on how to decide on a taxis service for travel and how. This includes the cost of hiring a taxi, tariff rate, travel distance, waiting time in targeted traffic jams, and at the curbside for you personally. The pricing structure is in all probability probably the most vital issue that you need to check. Time management coaching is really a requirement for all drivers linked using a trusted Salt Lake City taxi service and it should be clearly reflected in their high quality commuting solutions. A superb taxi enterprise really should offer you you not just punctuality and reliability, but in addition ease of booking.\nRather than expanding inpatient with all the cab driver more than situations beyond their handle, control your own situations: give yourself lots of time for you to get for your location. But overwhelmingly, when those persons asked polled more frequently than not responded that in his or her minds, a taxi was the far much less high-priced choice. What are their priorities in selecting a Salt Lake City taxi service. This short article will likely be explaining to you why it is much better to hire a taxi as opposed to driving your own car. 1 of your major causes why you’ll want to utilize a cab service as opposed to commuting on your personal is for the reason that it will be a lot less complicated for you to travel around the area.\nFor those who do not choose to wait around you could attempt a private transfer that will price you just a little bit additional but might be quicker and a lot easier for you. It is very quick for us to obtain a taxi at the destined time. Travelling within a fancy sedan is anything that a lot of men and women would like to encounter. This way you can steer clear of having trapped inside a scam and mischievous drivers. If you need to acquire a limo for your destination then this will mean you must shop about for a business that offer these specifically. salt lake city taxi If you’re at a significant airport you can find lots of Salt Lake City taxi service solutions readily available for you personally. Some people also find sharing a public transportation with strangers uncomfortable. You’ll find that this distinct concept may be a very excellent 1 for somebody searching to get a little small business going in the town where they live. Hunt for other people today on the street who could possibly be hailing taxis and copy their approach. Such services will help you when your car or truck needs to be offered for repair or perhaps the females on the home require to travel alone and you cannot accompany them.\nYou can find also internet sites that offer comparative services and this suggests a number of corporations get their models on the internet sites and have the site market them. In contrast to a cab driver, a chauffeur respects and anticipates passengers’ demands. The colour in the cabs was not the only transform that Hertz brought about, he installed the initial targeted traffic light in Chicago and he place manual windshield wipers on the cars. As to the safety during the ride, the guidelines are fairly common for all parts of the planet. It doesn’t imply that your particular connection with them really should be solely depending on fear, but worry need to be there.\nThey could either take a taxi cab to their location of option, or if perhaps they had been on a tighter spending budget they could use the nearby public transportation system. This may give you an notion of how close they may be to exactly where you happen to be and how quickly they may arrive. Do note that diverse solutions have distinct packages, and you need to thus book based on your particular requirements, which include your location and the number of men and women within the trip. All of the measures have to be taken to assure a proper transportation service. Service may be scheduled in advance so there’s no need to be concerned about obtaining to a enterprise appointment on time.\nThey’re yours and they may be ready waiting there to greet you. Each and every fraction of a mile is charged for by the driver. Each and every spot includes a different style of hailing a taxi. Take a look at the high-quality of solutions that they provide as well as the cost they charge you. Consequently, you happen to be assured of acquiring the appropriate car to transport you for your location.\nThey might sell typical cars, or trucks and even farm machinery and recreational and off road automobiles like snowmobiles. Hunt for indicators of overspray to panels, bumpers and fittings, look for areas of paintwork which can be inconsistent using the basic situation of your car (these may well indicate filled dents, filled rotten patches) and check that all of the tyres are wearing evenly (uneven wear may perhaps indicate the vehicle is not running straight and correct as a result of a crash or poorly executed accident repair). Though this concept initially began with luxury models, most manufacturers have instituted these kinds of applications. This way, whenever you make a decision to sell the utilised auto just after a couple of years, you will be in a position to sell it at some sort of price which will be pretty equivalent towards the value you had bought it at. They must also be capable of present you with all of the important documentation relating to the cars history. Because cars are repossessed for non-payment they will be of the make, model, or year so you may even be able to uncover a relatively new automobile with an wonderful value. cars The car must be test driven around the road at many circumstances and checked by a trusted and reputable mechanic simply to be protected that the vehicle you will buy is road worthy. This is mainly because a new vehicle is far more high-priced and includes a larger worth, and it fees a lot more to replace components and repair it in the event it gets broken in a collision. Having a warranty readily available sets a lot of car buyers’ minds relaxed. Some vehicles come off the assembly line being a lemon. Essentially, which you have found the employed auto of one’s dreams, it is possible to go in individual, test-drive the auto, and then speak about price. By utilizing a web-based web page, you will be able to save on time and money in looking for utilised vehicles, you might will also get the likelihood to make contact with these firms and schedule to get a test run as soon as possible.\nLots of individuals dream of shopping for a low cost, excellent, utilised car or truck. Will be the vehicle not just wonderful around the outdoors but in addition impressive on the inside. Turn the auto on, and hover your had more than the exhaust pipe, [be careful not to place it on the pipe its self, it are going to be hot] then smell your hand, should you smell burnt oil, the piston rings around the car might be going terrible. At times, new players don’t possess the maturity and expertise in supplying quality vehicle units. A word of caution for any person, who’s serious about owning a bank repossessed automobile for sale. Provided that individuals drive cars, they’ll need to have to be stacked someplace once they have come to finish with their life span and this really is exactly where a salvage yard will come into play.\nMost of impounded cars are privately operated cars that have been impounded through the government, monetary institution, police or banks. This implies that you can have somebody offered when there is a dilemma and that you simply are going to be in a position to speak to them when required. Also keep in mind that our calculations didn’t take into consideration the amount you are able to save each and every year on ad valorum taxes and insurance coverage for less-than-new cars. Due to the fact the car value is significantly less the insurance premium is generally less. The cost quote above was only the price tag you acquire from a regular car or truck dealer. Some insight right here may well identify when you have a very motivated seller and give you the upper hand within the negotiation.\nA single with the greatest and generally overlooked outlets for acquiring applied cars which might be priced beneath it really is trade in worth are public auctions. This can provide you with much more negotiating energy as you may inform the dealer which you will leave with the car in case your preferred cost is met. Broken cars are either premature end-of-life autos impacted by collision or all-natural calamity, or they’re natural end-of-life autos that have retired from roads soon after years of substantial use. In many situations, the warranty will state just what things are under warranty including the engine or transmission, to get a specific quantity of months plus the dealership will cover all components and labor. Take notes of unique price tag ranges every dealer provides to you and make a comparison with each and every other. Finally, you should determine just how much you believe the automobile may be worth and make an give.\nAlso a brand new auto dealership can offer the best warranty around the vehicle, as well as they may be seeking to make a powerful consumer base. It is still okay to buy a utilized auto if it will not be also old. This really is the top technique to measure up a car’s worthiness. But there is certainly price tag to spend for all that unbridled joy of getting a brand new car. Should you decide to buy a applied a single, you could obtain a fairly very good model with fantastic performances, at a very low price. Generally occasions in the event you change the oil it, you will be able to see or smell smoke from the exhaust that may possibly have not been there prior to. cars For this reason buying a brand new automobile can be a thrilling event. On the web auto auctions offer a wide array of autos which includes motorcycles, cars, trucks, SUV’s and recreational autos to bid on. You must take the time and work to perform the analysis. This can be for the personal security, as you do not know who you’ll be coping with. A few capabilities you should not overlook are security and reliability. It may perhaps happen that, you will be unable to locate the make as well as the model you desire.\nAt times we get blinders around the vehicle lot, and time is required to “cool off” and refocus. You must keep in mind that after you buy the car, any challenges that it has will develop into your headache. Turn the vehicle on, and hover your had more than the exhaust pipe, [be cautious not to spot it on the pipe its self, it will probably be hot] then smell your hand, for those who smell burnt oil, the piston rings around the automobile could possibly be going terrible. Dealerships also have to have to provide the title of ownership for your vehicle. It is understandable that you are eager to ride about in a vehicle, but that does not mean that you just have to buy the pretty initially ones that you encounter. Then obtain out how lengthy they have had the car or truck and whether any repairs were carried out on it during that time.\nOpen the doors and run your fingers through the inside of the door, once more, your hunting for virtually every paint the feels rough or bumpy. A number of these cars have witnessed several incidents of the previous. Naturally they may be not able to predict just what could go wrong with all the car, but it assists to possess a professional list of eyes to take a as soon as over look and ensure that that some thing just isn’t terribly incorrect with the automobile. It doesn’t cost a lot to purchase a brand new auto at the showroom. A automobile which has been used for any long time is much more most likely to possess bigger troubles as compared to advantages. Gone will be the days of trawling by means of stacks of paper to find your new auto.\nSometimes car or truck dealers wanted to get rid of old models rapidly and they also slashed the rates and place these up for auctions. Commonly the autos in these applications are late-model cars with somewhat low mileage. If probable, ask for information regarding earlier owners. These function second-hand and reposed cars so inspect the vehicle extremely carefully. This will assist you have a far better perception of prices and market place trends, as you will discover a huge number of applied cars listed. By conducting a web based search you’re able to get an incredible idea of just how much the unique model that you just thinking about is going for.\nIt is hard to seek out a vehicle that matches all the preferred functions. Search for signs of overspray to panels, bumpers and fittings, hunt for areas of paintwork which are inconsistent together with the common condition in the car (these might indicate filled dents, filled rotten patches) and verify that all the tyres are wearing evenly (uneven put on might indicate the car isn’t running straight and correct as a result of a crash or poorly executed accident repair). Many of those establishments have made enacted policies that have produced credit obtainable to those that will need it. You may have noticed advertisements from car dealers and producers providing cars in a fraction with their original price or on unique provide, but in most instances with these gives the client ends up paying the price somehow. When going to look in a second hand car or truck sold by an exclusive purchaser you must take into consideration taking a person with you who knows about cars. In our culture in the event you do not have sufficient cash saved to get one thing now, you’ll find constantly lots of hawkers of loans and credit to lend you the money to do so. cars The thrill and excitement of bidding against a large number of bidders may be nerve wrecking. When someone is shopping for a used vehicle in the owner, then he ought to take care that he need to obtain the exact same automobile which he had seen. These unique auctions are held at a huge selection of places throughout the nation every single year. Second, be sure that you are receiving a car or truck unit from a reputable brand. This can tell you when the automobile has been stolen, been in an and accident, or is on finance. You need to however, be cautious when applying to get a loan of the kind.\nBrowsing for 1 that you simply fancy has never ever been much easier with all the long list of inventory that is definitely updated practically each day. Despite the fact that you might be a great deal exited at the repossessed car or truck auction figuring out that you simply will purchase your dream auto there, it’s generally advisable to remain calm and to possess the required data at hand on the different selections that you are going to create so that you could be sure not to miss out on any superior offers and getting sure that you simply will find the top deals at this auctions. Employed auto dealers will generally make an effort to stretch your limits. You should keep clear of these cars as a lot as you are able to. In circumstances where there’s a lot competition searching at and bidding to the automobile, it is difficult to get an excellent deal for the reason that it drives the price tag up. Due to the fact persons hold hearing news of employed cars getting sold out, somebody inside your number of acquaintances is going to be in a position to direct you to a used-car owner who’s willing to sell a auto that is in very good situation and hopefully at a reasonable cost.\nIs there an awful large amount of noise or smoke emanating from it. Just before the buy you ought to have already performed some on the internet investigation into the specific make and model you happen to be keen on and know of the recalls or widespread difficulties connected with all the vehicle. Discovering an auto salvage yard does not need to be complicated. You permit yourself to commute day-to-day inside your hometown. Buying a employed automobile will not be as challenging as it used to be back within the days when it meant deceitful dealings within a person’s yard. What they do is they get the terrific cars in a discount and then sell them.\nThey then place a higher mark-up on these cars just before putting them up for sale around the lot. People today caught in these situations are often the ones who are inside the prohibited drugs business or those that run away from their monetary obligations. It is generally sensible to take a pal with you when going for an auction, preferably somebody who knows a little about made use of cars. Applied cars have a single big benefit more than acquiring a completely new vehicle and that is the cost. Be certain that each of the rest in the bidders usually are not individual buyers hunting for these cars like you. Verify to determine of there is any white substance mixed with the oil.\nIt is challenging to find a automobile that matches all the preferred capabilities. You can definitely discover 1 of these yards inside your region. He might be going to these auctions, or perhaps the banks, to seek out a vehicle to resale. These cars frequently have bent frames, airbags usually do not perform, poor suspension, etc. In the event you determine to purchase a applied one, you can get a pretty fantastic model with fantastic performances, at a really low cost. This really is a great indication about whether the vehicle has been in an accident and had panels replaced. cars Do a background check on the person you desire to cope with. Ask to the price and rate of interest you need more than the telephone. Working with the web to find all readily available models which you desire to purchase inside easy driving distance of where you live is usually a terrific technique to shop. Being a consumer who likes to buy used cars, it is only fitting that you simply take some precautionary measures to help you come across the top good quality cars. Auctions are generally pretty properly but no one likes to stand around in the cold. Seek out a few of the much less preferred, but still functional, trusted, and safe brands.\nUnless you decide to lease a car the quantity of cash you have to put down on a new car is normally fairly substantial. As soon as you have inspected everything, ask for those who can test drive the automobile so it is possible to verify the engine’s efficiency, too. But, with these other vehicles, which is not the case. On the plus side, you don’t have to worry about steep depreciation fees and other pricey upfront charges. Certainly not, you can normally decide on most any type of automobile from the respected dealer, from trucks and sports utility automobiles to sporty models, both foreign and domestic. Cars are simply machines, and as long as they may be cared for properly, they’re going to continue to run smoothly.\nThere’s no point in beginning your search till you understand just how much money you need to devote. The main goal at this stage in the procedure is to test drive the car and be certain it is within very good condition–it is not time for you to purchase yet. That is some thing to remember when thinking of a car or truck that may be two to five years of age. There are wide selections out there today in repo car auctions. One in the most effective guidelines when it comes to acquiring a applied car or truck is when you know nothing about cars then make certain that you just take somebody with you who does. Consequently, how do you grow to be a knowledgeable and shrewd used auto purchaser.\nAlso spend close interest for the glass and specifically to the tires to see if they are all right or threadbare. Precisely the same is true for all sorts of recalls and service campaigns. Are there large quantities of smoke, black or white being omitted. What about some extra creative ways to find a great, affordable utilized automobile. This can not just save you funds, but it can make sure that it will last for many years. With presents of as much as 90% off retail value, it just isn’t uncommon to find employed cars below 1000 dollars at these auto auctions.\nThe most beneficial remedy would be to sell off these cars as quickly as possible and pretty usually; this would imply that the prices will be dirt low cost. You might would like to come across a mechanic or someone who has enough knowledge about cars to complement you when purchasing the utilised automobile. When it takes place to become someone you realize, you are able to count on receiving it at a far more reasonable price and also you also understand the car’s history – has it been maintained properly. Your subsequent task will be to do some study around the auto you’re interested. Properly, that may well happen, but it’s the really rare exception. When buying privately make certain that you just discover as a lot as you’ll be able to regarding the make and model of your certain vehicle that you are going to appear over. cars Even when you don’t acquire the first time you will have a superior understanding of the bidding course of action and the way all the things operates. Auto enthusiasts usually pay a visit to junkyards and salvage yards browsing for hidden treasure. Nevertheless, it demands thorough on line analysis and aid from pals to decide on the most trustworthy dealer to the specific car you’ve got on mind. Some dealerships obtain inventory from buyers who trade in and repair the autos thereby making the value to vary by car from one particular dealer to one more. It can also be critical to keep in mind that dealership will almost certainly never sell the automobile at below the wholesale price. Make sure you take the time to find out what is on your credit report just before applying for any loan.\nAfter you’ve researched and found the model you’d like, save yourself from losing worth in your investment, and obtain a utilised automobile. Take a buddy in addition to a mechanic with you once you go car buying. Should they obtain a auto with high-mileage or body damage, or a single that will want repair, they just sell it of in a employed auto auction. A different selection is getting a applied vehicle, this could be very helpful for your finances, and nevertheless there are actually still some important guidelines that you have to take into consideration ahead of looking at acquiring a utilised car or truck. You can also observe the rates for the cars and possible reimbursement plans around the site. Uneven tire wear may perhaps also be indicative of a higher dilemma, such as a suspension or alignment situation.\nThat way, you are ready to negotiate a fair deal. The initial test drive you’ll want to merely be checking the general fit on the car or truck. Also bear in mind that our calculations didn’t take under consideration the quantity you could save every single year on ad valorum taxes and insurance coverage for less-than-new cars. Find out irrespective of whether the kind of auto you desire has any popular concerns or difficulty spots. From all the study you’ve carried out you ought to have a great know-how in the auto and its worth. Prior to going to a applied auto auction, it’s important to be certain about the type of auction you might be going into.\nWho’s on their way to becoming able to always get good cars. Although you can catch up using the worth depreciation of a new automobile in 7 or 8 years, you might do just as well getting a a single or two year old car and holding on to it for five. You may need to know that vehicle dealers are within the business to sell their solutions. The initial step to consider, is whether or not you’ve a automobile to trade within the first place, as there are actually a number of distinctive approaches that you can pursue to get the most beneficial deal. Possibilities would be the dealer you have fixed have both brand-new cars of 1 or two brands and utilized cards. The CPO program had offered used auto buyers the assurance that they are obtaining a car or truck that’s helpful and not additional of a headache.\nIt is not going to cost you extra and you finish up having the distinct model which you want. When you are presented using a auto that appears clean and immaculate don’t be fooled, it is simple to hide bigger issues. The risk of getting a car from these dealerships is much substantially slimmer as compared to it is at every other supply of employed cars. Make certain there is a clear title and that the car is mechanically sound, too. And cars could be bought for as little as 500 dollars. You will be able to find a variety of models, colors, years, and sorts when visiting one, enabling you to discover exactly what you’re following. cars It is quite easy to discover seized cars at these repossessed automobile auctions going at unbelievable low rates, some going for twenty to fifty percent off the original automobile value. Hence this is a a lot far better solution, however the downside is the fact that you will be competing with a huge number of people from all around the country. Nonetheless, it needs thorough on the net investigation and enable from good friends to choose around the most trusted dealer to the specific car you might have on mind. In this day and age state and federal laws prohibit dealers and people from promoting cars that have to have quite a bit of repairs to unsuspecting purchasers. The problem with them, nonetheless, is the fact that they’ve millions of other men and women all hunting for good employed car or truck offers there too. It may take place that, you are unable to find the make as well as the model you wish.\nIt appears fishy that these great cars are in fact that simply available. If one side on the cars stripes or decals don’t match the additional, than it has in all probability had a physique panel repaired sooner or later. All options have their benefits and drawbacks which you will need to take into consideration. You’ll find various advantages of an online used vehicle auctions. Normally cars presented for sale by owners will probably be more affordable than these getting sold by auto dealers. In no way seriously shop for a employed vehicle with no taking a person with you who knows about buying cars.\nWhen viewing any employed cars make sure you need to do it within the daytime preferably in the seller’s residence address. Certified applied cars are presented as getting in top shape mechanically and usually include a warranty. When you are purchasing about for any previously owned car, be sure to do your investigation before you decide to go to the dealership. Irrespective of whether you want to save and obtain some thing somewhat older or buy a newer but pre-owned car at a decrease price, there is going to become a thing out there for you personally. To begin off, you might use the newspaper, do a preview with the auction, spot out cars which you come across fascinating, research about the cars on the net and after that go back to location your bid. One example is, most call for bidders to become at the very least eighteen years of age and hold a driving license.\nWhatever the reason, in case you are seeking for any utilized car or truck, hold some guidelines in mind and you could just walk – sorry, drive away with a good list of wheels. This really is due to the fact new-car dealers only sell the cream of your crop of utilised cares. Using the advent on the world-wide-web came opportunities for folks to get access to items that wouldn’t typically be accessible. Even though today’s cars are remarkably robust, they do need common maintenance to make sure they will deliver the years of service of which they are capable. The most effective way to go about owning a bank repossessed vehicle for sale is to, go to a tiny bank and obtain the details about the bank repo cars. Essentially, to obtain much more particular regional information and facts regarding your particular car, you’ll be able to obtain a car or truck shopper that is normally accessible at convenience shops and book retailers, and look up your auto in there.\nThat way if they’ve received new shipments and hadn’t gotten around to listing them, you’ll be able to be 1 in the initially to look at it and pretty possibly acquire it before any individual else does. Verify out automotive websites, and appear at nearby dealerships’ inventories on their own web sites. Even though you do not strategy on financing something, do not hesitate to explore that alternative. For a very long time, only car or truck dealers and automobile brokers knew regarding the existence of these car or truck auctions and they have been in a position to make a killing out of these purchases. It is essential to make a decision on the budget for any applied auto. Not a very good twosome if you are searching to have the ideal deal. cars The dealers preserve this tiny secret tucked safely away inside their little book of tricks. What it is possible to obtain is a wonderful deal on much more mundane automobiles which include family sedans and SUVs. Possessing a wide selection of cars to select from is a significant selling point for many people today as well. Not simply shall you save revenue around the sticker cost, but you’ll also save on registration fees. A vehicle could possibly be 5, maybe even seven years old as well as the condition may very well be extremely superior. If you are obtaining from the dealer then be conscious of all the added extras which they could make an effort to entice you with and ask yourself in the event you genuinely have to have them.\nA few of these cars are commonly flashy sports cars and luxury cars which a lot of people can not afford to get at the showrooms, this automobiles are well maintained vehicles and a lot of the time they’re normally in excellent condition due to the fact this really is the location where banks and government authorities are most keen on when within the process of seizing this cars. So you can collect simple understanding for the actual auction. This way, you can get the worth for funds expertise. Appear meticulously in the bodywork to learn any holes, dents or rust. It appears that these cars were obtained from those who have been caught red handed. Within this write-up, we provide you with some recommendations on how you are able to avoid purchasing a rebuilt wreck.\nFor those who have then you should allow oneself time for you to carefully think about all of your selections. Even though obviously this may cost you inside the long run it can operate out cheaper if the car is nothing at all greater than an old banger. Despite the fact that it pays to possess a proper mechanic look at any vehicle you might be contemplating, understanding the basics to hunt for will assist maintain you from making important mistakes. You’ll find wide selections accessible these days in repo car auctions. Remember, you are browsing for a utilized auto some might have minor troubles or perhaps larger ones. Could be the quantity of wear consistent using the mileage from the vehicle.\nIn many circumstances the cars is going to be in best operating order but there’s no assure when getting a automobile from the government auction, so it is far better to become protected in comparison with sorry. Some individuals also undergo voluntary car repossession, thus giving you improved offers. Privately sold cars draw a lower cost but you’ve to be careful. What about some extra inventive strategies to locate a terrific, low-cost made use of car or truck. It can also be probable which you will never ever know the car’s full history since the automobile history report only reflects precisely what the preceding owners decided to report to their insurance business or to the Department of Motor Cars. For those who are buying your utilised car from a dealer then you have the proper to view the written warranty that’s supplied through the dealer before you get, this can be 1 way of ensuring of what you are finding before you commit oneself.\nThe top solution will be to sell off these cars as soon as you possibly can and pretty often; this would mean that the rates will be dirt inexpensive. Quite simply, where do you go to obtain out about reliability along with other elements due to this car. Your chances are much much better of acquiring a inexpensive made use of car or truck right here. There are actually truly men and women who use these auctions as their source of steady revenue. While you might not be aware that newspaper listings are not the only approach to do it, but there certainly are a good deal of alternatives to seek out out and attend auctions. Should you go to many dealers you might build some competitors and discover extra simultaneously. cars Even though you do not get the very first time you will have a much better understanding with the bidding approach and how almost everything performs. By means of these websites, you may even come across bargains and offers which are accessible for their on the net customers. It’s important to take the time and effort to accomplish the investigation. Some sellers won’t even do that on purpose, however they definitely just do not determine what it requires to maintain up a automobile correctly. Know what you anticipate and just how much you will be willing to commit for repairs when the auto you come about to wish requires repairs. Make sure to take the time for you to find out what is in your credit report before applying for a loan.\nIt is possible to nevertheless appreciate each of the advantages of acquiring a utilised vehicle without having operating into such troubles. If you can recognize lots of monetary added benefits by buying utilised cars, your neighbor’s sleek new ride could not look so snazzy after all. Since a bargain car or truck, is only a bargain, if nothing goes incorrect with it. Look very carefully at the bodywork to learn any holes, dents or rust. They could at times tell in the event the auto has been in an accident just before, or even when the vehicle has been repainted. There are actually sites that concentrate on applied cars, or perhaps seized government cars.\nThough a qualified auto fees about $1,000 to $3,000 more than a frequent made use of vehicle, the positive aspects that come with it are greater than enough to make up for the difference. But prior to receiving a applied car for oneself, you must take some vital points into the consideration. Ensure that that all of the windows climb and down as they ought to, that the power seats operate in most directions, that the wipers, directional signals, horn, and electronics operate. You might be forced to prevent that high-end package around the new vehicle for the reason that it rates you out from the buy. Search all of the websites that provide utilised cars on your list. This is the main advantage for folks that will give large sums of dollars for straight purchases.\nOften a quick-fix paint job is carried out to hide the rust underneath. Getting made use of cars, like anything else, comes with its personal set of pros and cons. You will find few sites which can be listing, actually, a large number of bank repossessed cars for sale on their own web pages. The value may have decreased a lot inside that year that you’re guaranteed to shed dollars. This will likely enable you to have a far better knowledge of rates and market place trends, as you’ll discover a large number of utilised cars listed. com you can conveniently get vehicle pricing information in just a couple of minutes.\nFollowing all, a trip for your local vehicle dealer row will likely not get you the sort of bargain you happen to be searching for. Be certain you drive the vehicle in all of the gears to verify the gearbox. The danger of purchasing a vehicle from these dealerships is much considerably slimmer in comparison with it will be at some other source of utilized cars. Now, we are going to provide you with some ideas on how you’ll be able to get your initially automobile minus the difficulties. Ultimately, ask your mechanic to hunt for prior harm. Moreover, ask them in the event the title is clean, this means that it isn’t a salvaged title. repossessed cars for sale Do a background check around the individual you want to handle. It is pretty unlikely which you will come across any type of deal even close when acquiring privately. A brand new auto might include issues associated with poor design and style or manufacturing defects that could have already been currently repaired through the warranty coverage period if it’s a utilized auto. These add-ons could consist of, no cost detailing solutions or totally free access to 24-hour towing services, among other following sale automobile services that may offered to clients. This really is because of the truth that they are typically maintained in mint situation together with Japan becoming 1 of the leaders in automobile manufacturing. In the course of time, the automobile industry has revolutionized with advancement in technologies, design, engineering and manufacturing.\nIt will not be uncommon to discover utilized cars below 1000 dollars from these car or truck auctions as bids can start from as low as $100 or less. However it is all too simple to get a low-cost utilised car that is, effectively, affordable. Needless to say, it’s only fair that the auto dealer make some profit, as they’ve to in order to remain in company. New autos are usually a lot more costly in comparison with employed vehicles. The truth is the fact that just about any make or model you could consider is available. Insurance premiums are a different benefit that comes from purchasing applied cars.\nOpen the doors and run your fingers via the inside with the door, again, your looking for just about any paint the feels rough or bumpy. The federal government will provide you with one particular no cost tri-bureau credit report every year at annualcreditreport. The status from the fluid check will let you know in the event the car or truck was maintained effectively and if it is in fantastic enough situation. Alternatively, you could have walk-in car or truck auctions exactly where you are able to bid for the dream automobile. The moral here is the fact that a bit of careful investigation could save you a massive headache later. As the tide of foreclosure properties rises, you’ll find sure to be extra of these possibilities on the market.\nIt is possible to check out their web page and study the comments of the shoppers. The only drawback to shopping for at auctions is that you could possibly need to go to greater than one particular time for you to obtain the precise auto you happen to be seeking for. This typically occurs after a specific time period or on account of some kind of policy change or upgrade. Right after gathering all the information and facts around the particular car you might have in mind, then comes the selection of where to buy it from. Because you’d probably spend off the car a lot more promptly, you may save much more income on reduced vehicle insurance premiums. In case you inform dealers you saw 1 with their cars listed for X amount online, they will have to honor that price tag.\nFind out if it appears like the car’s underside has been places you wouldn’t take a car you loved. Typically the aspects that should be regarded even though shopping for a car or truck would be the value, the make and model from the car, the situation, the mileage, repairs expected, safety and emission testing and so forth. When it happens to become someone you understand, you may count on acquiring it in a more reasonable value and also you also understand the car’s history – has it been maintained well. Look at diverse autos and avoided being narrow-minded when shopping. A easy drive off the lot along with your new sedan will probably drop the price of it substantially even when you have yet to take it onto the highway. There’s no set quantity of discount simply because dealers acquire the autos at different costs as the person selling for the dealer will choose to make particular quantity around the sale possibly to settle some debt or acquire an additional automobile. repossessed cars for sale 1st, examine the track record of the car dealer offering the made use of car or truck. You could use any search engine but the most advised 1 is using Google which searches for nearby vendors at the same time as global vendors. Check along with your neighborhood Automobile Registration authorities with regards to license, alter of ownership, registration of the car, liens and so on. For those who now start purchasing you will be armed with facts and details that puts you at a distinct advantage when obtaining a used auto. The markup that the dealer puts on will be influenced by all these things. The principle advantage is comfort but it will certainly have far more interest in the event the calculation is carried out completely.\nThis is not applicable to each and every brand but such is the usual case in any marketplace segments. If they don’t know or you feel they might not be telling you the truth, you are able to come across this information out. You may need to determine where you wish to try to find your vehicle. You need to remain clear of these cars as much as you can. For those who are searching to get a made use of automobile , one of the most obvious location is actually a Utilised Vehicle auction store. Don’t count on to component with $500 and be driving residence within a 3 year old SL-500.\nShould you are over a employed cars shopping spree, where do you search for good bargains. The much more you rush, the much more opportunity of creating the incorrect selection. Be certain that all the windows go up and down because they should, that the energy seats operate in all directions, that the wipers, directional signals, horn, and electronics perform. By which case, it wouldn’t matter if it has clocked far more miles. Search all of the web sites that offer utilised cars on your list. Lastly, always do research on the vehicle is proper for you as well as your family members when searching at purchasing a utilized vehicle.\nObtaining these on-line auctions is just not a challenging job at all, and another benefit is that you are going to have the energy on the World wide web at your disposal that will help you execute comparative research. What a lot of people today don��t know about is the truth that these automobiles are then put on auction to members of the public and are actually sold for a fraction with their initial expense. It really is probable to find actually excellent offers in those, but they are few and far amongst. The auctions these smaller time dealers are buying are essentially bottom of the barrow autos, for good auction sources see the bottom of this page. Information of car auctions might be identified online, in neighborhood newspapers and magazines. In case you inform dealers you saw 1 of the cars listed for X amount on line, they must honor that price tag.\nWhen the oil is dark then it is attainable that the car or truck features a really dirty engine. Any time you are performed test driving ensure that to verify the VIN of your vehicle before you leave in order that you might continue to do your research. Check the VIN# stickers all around the car to ensure that all components are genuine and usually are not taken from other cars. Considering that every single employed car is unique (mileage, condition, and so forth), a purchaser may have to be wise sufficient to estimate the value. Use your judgment and trust your intuition to determine no matter whether the automobile is a smart purchase. It is significant for you to have a little bit artificial knowledge ahead of so you’ll be able to keep away from mistakes and embarrassment inside the actual auction. car websites Most autos will rust heavily on the underside prior to something else, and in case you notice a heavy quantity of rust you will need to avoid the car at all charges since it is falling apart. On the other hand, you’ll find a handful of issues to verify prior to producing a buy on the applied auto. For many people today, employed cars are what match ideal into their budget. In either case it could imply that the next utilised auto is definitely an absolute bargain. Ask pertinent queries which include what components have been replaced, gas mileage, and also queries regarding comfort. You’ll find a number of issues you can look for to find out how abusive the former owner or owners had been for the vehicle.\nThe very first location to acquire utilised automobile values will be the applied car or truck buying guides place out by Kelly Blue Book along with the NADA Guide. These automobiles are often bank repossessions or government and police seized cars. You’ll need to determine where you should seek out your car or truck. Vintage cars are obtainable in a finite and dwindling quantity as time continues to erode on their own availability. Usually cars offered for sale by owners will be cheaper in comparison with those becoming sold by car dealers. Also be cautious when it comes to taking any payment protection insurance coverage related with any car finance by means of them as this can boost the cost up drastically of the vehicle.\nOpen the doors and run your fingers through the inside of the door, again, your looking for almost any paint the feels rough or bumpy. For many individuals, going to applied cars dealers to hunt for a inexpensive second hand cars for sale will be the natural thing to accomplish. You need to will also get the oil changed promptly just after you buy a utilized auto, unless you might be certain the previous owner just had it carried out. Made use of vehicle dealerships simply provide you with many different positive aspects you will not discover elsewhere. Winning a salvage automobile by beating out a huge number of other bidders is definitely an fascinating knowledge in itself. Ensure that you study thoroughly and invest in several magazines and guides from your nearby newsagent.\nHere is really a straight to the point write-up with numerous suggestions which might be confident that will help you locate the most effective used car in no time. Should you haven’t got any person whose opinion you could possibly trust then you sooner or later to have to make use of your individual instincts. Do your homework and also you might just land a very good deal. These feature second-hand and reposed cars so inspect the automobile really very carefully. That signifies no accidents, no eating or drinking in the car or truck, and having the oil changed along with other upkeep taken care of on schedule, and maintaining the mileage low to typical. Because of this, in case you can not discover a very good deal over a applied auto within your paper, exactly where are you able to appear.\nTake a fridge magnet with you and verify the bodywork for filler. As soon as you choose on sort of vehicle you will need it is time to do your investigation to narrow down the alternatives. If it seems that they are wearing a lot more rapidly on one particular side in the tire, that might be an indication that the front end could will need perform and you need to also element that in to the car price. He knows exactly where you can obtain that exact same vehicle at a great and affordable price. Nevertheless, if you’re shopping for the automobile at some sort of discounted price, maybe, you could possibly afford it. If you are buying about for pre-owned cars it is extremely vital that you simply take your time and make certain you are receiving a superb deal for the money. car websites Although purchasing from the private seller is usually more affordable, you will discover a lot more risks related with doing so. By getting a applied auto, it is possible to save a lot of cash. That may be a tall order; acquiring a affordable, made use of car or truck that also fits the above criteria, but it can be completed, you simply need to where to appear, and the way to shop. Bank repo cars, which is one more way of referring to cars that have been repossessed by banks, are a great supply for acquiring cars at some sort of discounted price. There are two motives why buying car that are second hand are less costly. The car’s suspension, which involves the shocks or struts, should really be in decent shape mainly because this is what supports the four tires on the car.\nYou spend for charges for travel just to get to your workplace at a very slow rate. This was because employed automobile dealers had an had been painted within a terrible light. This can be checked by going online and typing inside the automobile identification quantity or VIN. But, there are actually some significant added benefits present with previously owned autos, too. Mark on your thoughts three or so cars that you simply would take into consideration so you’d have just the best number of options for bidding through the actual applied car or truck auction. You might also locate some excellent vehicles at smaller dealerships.\nWhat this implies is that when you finally discover the automobile of your dreams the value on the cars sticker is all you pay. If there have been more than a usual amount of owners, you could possibly ask your self if there’s a challenge or several problems with the vehicle. In the event you identified one particular automobile you like, you will more than likely locate a further that is certainly the exact same or superior and you may perhaps have the ability to find it for less funds or even in far better condition. Because getting a brand-new vehicle will not be always feasible numerous car buyers will start out hunting at used cars. The moral here is the fact that a bit of careful investigation could save you a huge headache later. What they do is they obtain the fantastic cars in a discount then sell them.\nMost dealers promote the cars they have for sale on their own internet sites as well as on generic sites like cars. Auctions for applied cars can give you with mounds of opportunities to get a superb automobile devoid of spending also substantially cash. The key is : for the reason that that is a very protected source of revenue for the majority of auto dealerships and will not be advertised to the common public. There are actually some incredibly important things to verify on the auto before you acquire it. When it’s time for you to invest in, look at big and small dealerships at the same time as at vehicles getting sold by their owners. The issue is that this is the supply from where all applied car dealers execute their auto purchasing also, and after that sell them at some sort of greater cost.\nThe best option could be to sell off these cars as soon as you possibly can and quite typically; this would mean that the rates will be dirt inexpensive. Stay away from creating purchases that will not be worthy of your sort of life. If it seems that they are wearing much more quickly on one particular side on the tire, that may perhaps be an indication that the front end could will need function and also you should also aspect that into the automobile value. When they see you as knowledgeable and shrewd, they’ll know they’re able to not push you around. These savings could assist you with massive costs, like a brand new property or paying for the children’s college, or they could be place toward one thing rewarding, like a boat or perhaps a luxury trip. A well-maintained automobile which has noticed as well a great deal of use can be a very good purchase. budget car sales They need to ensure that you are pleased being a entire along with your choice. That is a common portion that’s replaced at service and can indicate how the owner has been treating the car or truck. In most likelihood, the auto that you would purchase from right here could be somewhat new, which implies that there won’t be also many challenges with the functionality of your vehicle. These add-ons could incorporate, free of charge detailing services or absolutely free access to 24-hour towing services, among other right after sale car or truck solutions that could supplied to consumers. Since a layman cannot have all the know-how to inspect a car, it is normally better should you take an professional mechanic along to accomplish the important inspections. The very first point to consider when you’re searching for any made use of car or truck is exactly what your needs are inside a vehicle.\nThe dealers may possibly also attempt various underhand tactics to make sure that they get the repo cars obtain. May be the vehicle not only gorgeous around the outdoors but additionally impressive around the inside. Each day, thousand of cars are becoming seized or repossessed by police or banks and acquiring a location to retailer these repo cars would expense an massive amount of funds. If anything is in good condition along with the contract is well termed, then, you could possibly attest that inexpensive used automobile auctions genuinely are good venues to get second-hand autos. Obviously when you pick out to look on-line for the utilised auto then this provides you the most significant scope and possibilities. Maintain in thoughts that the older the car or truck, the additional most likely you will be going to have some significant repairs accomplished within the first handful of years of utilizing it.\nThe answer to this lies within the fact that virtually all Americans obtain their vehicle on credit, so in impact they’re going for a loan to buy these cars. Early birds surely get the much better catch so do so and be privileged to choose from all the cars for sale. For those who have found a “bargain” or even a vehicle you just like the look of go verify it out. Mainly because the vehicle worth is less the insurance coverage premium is usually significantly less. If they don’t understand the answers, ask them to discover out. As soon as you located a car or truck that appears to fit your needs, you will find some factors it is best to check to produce confident you will be in reality obtaining a superb, low-priced automobile, not only a low-cost automobile.\nIn the event the seller has practically nothing to hide they will most likely let you take the car to your mechanic to get a “check-up. Usually the vehicles in these applications are late-model automobiles with fairly low mileage. Privately sold autos draw a decrease price tag but you’ve got to be careful. They will also appear under the hood and do a multi-point inspection of fluid levels, hoses, belts, lights and so forth. And preserve in thoughts that if you acquire a applied vehicle you cannot take it back for any refund (except in CA). Don’t invest your hard earned funds unless you get the vehicle checked out properly.\nMost dealers, to produce a rapid commission see possible utilized car or truck purchasers and end up receiving them to get something costly which wont match into their budget, even right after the ‘low’ monthly plans. You can also invest the cash toward your retirement, or you could save it and spend for the next auto with cash. You will discover some excellent cars that you simply can acquire at auctions, like government auctions. If you want a car for use in the countryside where the roads are anticipated to be typically dilapidated, you need to insist on the ATVs. With all of this pricing information and facts in thoughts, you need to now possess a clear picture of just how much your car or truck should really reasonably be expected to become worth in case you either sold it oneself or traded it in. In our culture in the event you do not have adequate dollars saved to buy one thing fundamentally, there are constantly lots of hawkers of loans and credit to lend you the cash to do so. budget car sales Certified cars also carry an extended warranty, a nice function that most would-be automobile owners would actually appreciate. Cars are completely destroyed at some sort of salvage yard and people can then retrieve what is left. Should you do choose to purchase this vehicle then you have to be prepared to become around the lookout of these components and then ask the seller to subtract the price from the promoting price with the vehicle. When the fear of vehicle mechanical problems could be the principle aspect in your choice, it is best to take one more look in the information before you decide to make the choices to get a brand new car. In case you stroll in to a dealership and acquire the vehicle that you believe you will need without obtaining additional data, you’ll soon regret the selection. You do not want to go to applied auto lots any longer to look for the large deal, now you could easily discover the very best for sale second hand cars on line.\nThe very first location to obtain utilised car values will be the applied vehicle buying guides put out by Kelly Blue Book and the NADA Guide. In the event the car or truck is built in the factory they’ve robots that paint the car or truck, then they “bake” the paint to stop any rough spots, discolorations, or bubbles inside the paint. Installation art is necessary too as interesting garden art. Vintage cars are readily available within a finite and dwindling quantity as time continues to erode on their availability. Try a three point turn in the car or truck, that can verify the reverse gear, and when you put the steering on full lock you will be in a position to verify the wheel bearings and steering rack (your seeking for clunking sounds or creaking). Due to the fact folks retain hearing news of utilized cars getting sold out, somebody within your number of acquaintances will be in a position to direct you to a used-car owner who’s prepared to sell a car or truck which is in great situation and hopefully at a affordable cost.\nEven taking into consideration their overhead, they’re generating a good profit. Test the car by driving in diverse situations, for example apply the brakes abruptly, alter gears regularly, speed up a bit, all through all of the just watch how the car or truck performs and reacts. Irrespective of where you reside be it in California, Washington DC, Philadelphia, San Diego, Miami, Seattle, Australia, UK or Asia, you might effortlessly obtain a nearby auction exactly where you may comfortably do a ?employed auto online shopping?. Do not ever take someone’s word that it has been inspected already – even though that person is a dealership. There might be lots of factors someone buy’s a utilized automobile. Verify the automobile for rot within the doorways and wheel arches.\nA great auction ought to possess a period for preliminary inspection and you really should unquestionably go there to be confident that the auction will be worth going to. Initially of all, you may need to know which make or model you want to buy. Most internet sites may possibly even ask for a deposit or bank card information from members before they bid. All this depends upon the amount of comfort that 1 will have although shopping for an older car. When the car salesperson finds you a possible car buyer he could touch your low present. If it looks genuinely grimy it is often a superior indicator that the owner does not take much time for you to care for the vehicle.\nYou nonetheless have to get the oil changed and typical upkeep carried out on the car just like the new car or truck, but you do not need to sweat over some coffee spills on the upholstery or scratches and dings on the paint because you realize the automobile will be worth small when you are prepared to obtain rid of it anyway. Some salesmen who know there is a challenge using a car will generally times do factors like that, and in case you ask them precisely what the sound is they’ll probably provide you with some silly answer. The chances of you discovering the vehicle you may need, inside your budget, are really great. You could have noticed ads from car or truck dealers and companies providing cars at a fraction of the original price tag or on special offer you, but in the majority of circumstances with these presents the client ends up paying the cost somehow. He might know some inside info of worth regarding the bank repossessed cars, and is prepared to pass it on to you for some charge. Thus, let your mechanic or buddy do a bounce test to make sure it is in superior shape. old cars for sale Grab a handful of auto magazines that truly sell cars. You’ll be able to determine a answer or at least turn into informed swiftly. No matter if you choose to buy a new or perhaps a made use of car, you are able to stay away from making some frequent mistakes when producing this essential purchase choice. In the event you find 1 that may be a qualified pre-owned automobile, that’s an excellent sign: the dealership is certifying that it’s in good situation. Even when you might be shopping for a utilized vehicle, it continues to be new and thrilling to you. Believe about the way you really feel behind the wheel, the general sound in the car, and basic efficiency.\nWhen going to determine a dealer, be clear about your budget and go having a firm mind. You may have no auto payments, so when you get laid off from your job or have other short-term economic setbacks, there is certainly no anxiety in the possibility with the automobile being taken by the repo man. Nevertheless though this really is an incredible starting point it is not where it ends, there are lots of other things to take into consideration besides the colour with the auto. They appear and perform on cars every day and really should have the ability to spot a lemon a mile away. Their quoted price tag might be just adequate for them to regain the amount of dollars that they had loaned out to the defaulter. It is usually a good notion to take the vehicle on the roads exactly where you drive each and every day before you decide to make the final selection.\nIronically enough persons who obtain brand new cars have just as a great deal of a possibility of taking their automobile in for repairs as those that have bought made use of cars. And purchasing made use of cars, in a way, is advantageous since they don’t possess the tendency to depreciate as substantially. The engine and transmission must be in fantastic condition. You ought to also look for a superior deal, no matter the way you spend, mainly because the kind of payment normally doesn’t make a distinction within a sale. Firstly, what sort of vehicle are you currently planning to acquire. When you discovered a auto that seems to match your needs, you will find some points you ought to verify to create confident that you are the truth is having an excellent, low cost car or truck, not just a low cost car or truck.\nWhen shopping for a particular utilized vehicle you should possess a superior idea of what to count on. Cars at a salvage yard aren’t categorized or stripped. We will explore a number of the most significant factors which you will will need to bring along to inspect the car, and offer you a step-by-step guide on the way to inspect your utilised automobile your self. Purchasing a completely new car or truck in the show room is excellent but while thinking about depreciation rate it basically implies that about thirty to fifty % on the cars worth is gone and this explains why you’d need to get a made use of or repossessed car. Be certain that all the rest in the bidders usually are not individual purchasers looking for these cars like you. The factor is that that is the supply from exactly where all employed vehicle dealers carry out their auto shopping for as well, after which sell them at some sort of higher price.\nMost dealers, to make a speedy commission see possible applied car buyers and finish up obtaining them to purchase one thing expensive which wont fit into their price range, even following the ‘low’ month-to-month plans. Try to find signs of overspray to panels, bumpers and fittings, hunt for places of paintwork that are inconsistent with the basic situation on the auto (these might indicate filled dents, filled rotten patches) and check that all of the tyres are wearing evenly (uneven wear could indicate the car isn’t operating straight and accurate as a result of a crash or poorly executed accident repair). The kind of versatility and sources that a web based auction offers you in your fingertips is something really unmatchable. Absolutely everyone knows that a new car lost 65% of its worth within the very first 5 years. But what might sometimes turn out is that you might be overwhelmed from the big collection of different cars varying in costs. The much less picky you will be when it comes to factors such as colors, brand, and options, the less difficult it will be to get a terrific applied auto, affordable. old cars for sale Even if you do not purchase the first time you will have a greater understanding with the bidding approach and how almost everything performs. You can also ask the dealership for your car’s service receipts to locate out much more about its history of mechanical challenges. Several utilised cars on dealer lots are identified at auctions. This could be critical, specially in case you are seeking at more than vehicle at a time. There are actually an enormous quantity of web sites where sellers list their cars in addition to pictures and detailed descriptions and this really is the easiest and quickest approach to uncover the vehicle of one’s dreams. A vehicle should meet particular top quality standards before a dealer can sell it to you.\nRight here are some vital ideas for wiser spending on made use of auto auction. You must try to remember that as soon as you acquire the car, any complications that it has will turn out to be your headache. Following verifying the car dealer’s track record at the same time because the car’s situations and owner history, it could be wise to survey the marketplace for similar models with the auto becoming provided by the automobile dealer. If it will not go properly by means of it, you can get an alignment difficulty or maybe a suspension dilemma or perhaps even a tire challenge. As you ask him, run your fingers via the modest crevasse of fender and hood, if you feel the paint to be rough or bumpy this indicates that the auto has been repainted. It can be a excellent idea to take the car or truck on the roads where you drive just about every day before you make the final decision.\nBefore you decide to even go seeking for your car or truck be sure you may have a common thought of just how much cars of equivalent age and variety go for second hand. Before you go to any applied vehicle place, spread the phrase about that you are looking for one and then retain your ears towards the ground. Who desires to go around bragging to their good friends about a automobile they bought that appears good, but runs like garbage. All of the choices listed here have a tendency to take a few effort in your element as a buyer. Even though buying, one particular need to be careful mainly because that is an unregulated industry, with no warranties, lack of full particulars about a vehicle, blind spots and so forth. It is quite regular for employed cars to have had a number of prior owners so don’t be put of by this, but do verify the cars log book and service history carefully making sure the documents will be within order and all of the dates and records check out.\nThen, before you do anything else, have a look at the costs, situations, and places of all of the different cars that match your requirements. Auctions for made use of cars can deliver you with mounds of opportunities to purchase a fantastic auto devoid of spending as well a lot dollars. It pays to take a mechanic along, someone you trust thoughts you, after you go along to check out a employed vehicle. Also appear out for imperfections inside the metal, including crinkled, dented, or shiny areas, which suggest the auto was repaired soon after a disaster. When it is time to invest in, look at large and tiny dealerships also as at vehicles becoming sold by their owners. Lots of individuals understand the clear elements to think about when getting a automobile that consist of getting some dollars at hand and getting in a position to choose on a fantastic dealer.\nWhen searching to purchase an old auto, its operating condition should be checked. Inside the past, there have been only some suppliers which you can rely on when it comes to cars. But rest assured your payoff will result in hundreds if not a huge number of dollars and savings and consequently effectively worth your time. It would be best for those who obtain a vehicle from somebody that you just genuinely know, good friends, family members, and colleagues will be the initial men and women that you just must consider acquiring a automobile from. In that is the situation for you, you will ought to uncover a low-priced, used automobile for sale. When you are pondering of getting a made use of car or truck then the web can be a very useful resource to you. local cars for sale This can be basically a very simple method that requires just slightly homework to pin down. An initial step in obtaining a used auto would be to hunt for a private seller or auto dealer which you can trust. Then visit the next very best deal on your list and repeat the final inspection method if necessary. Some dealerships can even assist you to on your quest to seek out the ideal car. Given that a layman can’t have all the expertise to inspect a auto, it is generally improved for those who take an professional mechanic along to complete the required inspections. Lots of individuals are frequently torn among obtaining a completely new automobile or a previously employed vehicle.\nWhen going to determine a dealer, be clear about your price range and go with a firm thoughts. After you discover the right vehicle, you can know and be capable of make it yours. A lot of people do not realize that there is a decision to save greater than 1,000 of dollars when they will need to buy a classic automobile or a luxury car or truck. Does the auto have missing interior fittings or scratched paint function. New cars lose the majority of their worth through the initial two or three years. Then obtain out how lengthy they have had the car or truck and irrespective of whether any repairs have been accomplished on it in the course of that time.\nMost new autos will lose a minimum of thirty % with their worth inside the initially 2 years of purchase. Additionally the majority of these autos are certified and include a substantial warranty. Going to utilised vehicle dealerships will give you access to many of the finest cars offered. 1 other point to consider is the fact that today’s cars hold up remarkably nicely with far beyond one hundred,000 miles showing around the odometer. One particular final tactic to consider is just after you test drive the auto, go dwelling. It is very regular for made use of cars to possess had various prior owners so don’t be put of by this, but do verify the cars log book and service history carefully making certain the documents are within order and each of the dates and records verify out.\nThis offers you lots additional possibilities than merely what exactly is present, generating it attainable for you to create the extremely greatest choice. If that may be just not what you want to do, then concentrate on trading it in instead, but realize that you will obtain a reduce price for the automobile as a trade-in. If not, then your best bet is to depend on your independent mechanic to check the vehicle. Right after the body inspection it is time to appear at the engine. It can also be possible that you just will never understand the car’s full history since the automobile history report only reflects what the previous owners decided to report to their insurance corporation or towards the Division of Motor Cars. You can find a number of on the net resources which have precise car or truck history reports.\nWhen you determine to get a new automobile, you’ll need to know that that is not only a approach that you simply can achieve within a few days. However, when you program to remodel the auto or sell its parts, all these concerns do not matter. If your limits are being stretched, basically stand up, say no thank you, and walk out the door. The cars sold right here may possibly come in the surplus of government cars, repossession, or impounding. When you make a decision to purchase a applied one particular, you are able to get a fairly very good model with excellent performances, at an incredibly low price. Verify all the buttons, air conditioner and radio to determine if they’re functioning fine. local cars for sale Utilised vehicle dealerships also can enable you to with all the process of transferring all the associated paperwork involved with ownership, and they also may possibly be able to allow you to with financing. You may search for precisely what you would like on the internet: sort the cars by cost, by mileage, by year, by features, and so on. That is definitely why you need to be pretty thorough within your verify. Not just will you save income around the sticker price tag, but you are going to also save on registration fees. One particular in the biggest differences are your consumer rights – or lack of them. Generally ask before you decide to finalize your deal if the title is clear.\nEvaluate such locations as safety, reliability, fuel economy, warranties, operating expenses, theft prices, basic attributes, and selections when producing you decision. This should really normally be remembered ahead of purchasing a used car. Therefore the purchaser had to help keep all the elements in mind ahead of purchasing a utilized car. Undertaking study within the beginning can save owners a headache throughout the obtain process. Both these locations are excellent places to locate a excellent vehicle at big discounts, that are normally at around 90% with the retail price. For those who finance the utilised vehicle in the exact same rate of interest, then you are going to only spend $12,600.\nFor those who are on a utilised cars purchasing spree, exactly where do you seek out good bargains. Certified utilised cars are presented as getting in best shape mechanically and generally include a warranty. If a automobile has been within a collision it are going to be worth pretty bit significantly less to any future purchasers, perhaps even as much as 30% – so retain that in thoughts. You will discover bound to be vehicle dealers in it, and you’ll be trying to outbid them on their own turf. Third, discover out what interest rates are at the moment accessible at regional credit unions. In this way, it acts being a double check around the Kelly Blue Book price, and tells you what folks are essentially asking for his or her cars within the real globe.\nOnce you get home, you can look for the Vehicle ID on Carfax to check out its history report. Very first there is the problem in the top quality of the vehicle. It is often sensible to take a buddy with you when going to the auction, preferably somebody who knows a little about applied cars. Also, verify the trade-in worth for the car or truck simply to remind yourself what the dealer in all probability compensated to the car–it are going to be thousands less in comparison with the sticker price tag. Several instances, you may will need a down payment or great credit as a way to receive a loan. Since the crash in 2007 this perception has changed.\nBefore you decide to begin, it’s a very good practice to have a checklist with you that enables you to make notes by what the truth is while you go. Granted it is actually a utilised car so we might require slightly additional for repairs, let’s say $100 a month. He may be visiting these auctions, or the banks, to hunt for a car to resale. Having said that, there are a few factors you’ll need to take into account before you acquire a applied car on-line. Getting “upside-down” in your car loan may well not seem like a huge deal. Owners who sell their utilized cars name their costs based on automobile dealerships’ costs on comparable vehicles although occasionally, they may even ask for any greater value in comparison to counterparts becoming sold in auto dealerships. government car auctions It must be cost-free of any types of greases, debris, oil as well as other outer elements. Additionally, a dealer tends to make a profit for producing use of a certain bank, either by marking up interest rate of buyers or by deciding to use the bank for a finance application more than other people. A further explanation is that it is really hard shopping for auto and pay the full payment up front. It is possible to get this data even from regional paper ads which also give the wholesale prices of all types of cars and four-wheelers like jeeps. This similar point may be applied on the case of employed cars also. For your car or truck dealer, you could effortlessly check their reputation by researching on line.\nYou’ll be able to nonetheless appreciate each of the benefits of buying a used vehicle devoid of running into such troubles. If it is, there is a blown gasket or even an much more really serious engine dilemma. So in practice, for those who are looking to purchase budget employed cars then you definitely are improved off hunting in the private industry. When a physique shop repaints the vehicle, they’re not as talented or have the sophisticated gear that the manufactures use. Applied vehicle dealerships can’t legally sell you a broken vehicle, which can be not fully accurate when purchasing privately. So you just need to pick out which payment term is best for you personally.\nThis class consists of a majority of four-wheel drive cars that are advantaged when it comes to maneuvering in muddy puddles and rough roads. This implies that you can have an individual accessible when there is a problem and which you will be in a position to talk to them when necessary. In Canada, a few provinces insist on the purchaser acquiring a Used Auto Car Information Package (UVIP) when purchasing a made use of vehicle. This is particularly valuable for each cars which you intend to purchase and for knowing the value of the car you presently own for those who strategy on trading it in for the dealer. From all of the study you have accomplished you ought to have a superior know-how from the vehicle and its worth. However, getting a used car has its personal list of disadvantages.\nSadly, some individuals have failed to honor that commitment which leaves the monetary institutions no option but to possess the vehicle repossessed. Some even are luxury cars which can be auctioned to the public at substantially a lot more reasonably priced and reasonable costs. It is often sensible to take a buddy with you when going to the auction, preferably someone who knows a bit about applied cars. This really is a query that quite a bit of individuals ask themselves considering the fact that more people today invest in utilised cars than new cars just about every single day. Stay away from cars that have an excess quantity of physique function or you might be risking a vehicle with key structural troubles. The CPO system had offered made use of car or truck purchasers the assurance that they’re finding a car or truck that may be valuable and not a lot more of the headache.\nBy way of example in case you go to a Ford store and they’ve utilised cars that is definitely a franchised dealer, in the event you see a utilised car lot on the side of the busy road including Joe’s Motors, then Joe’s Motors is just not a franchised dealer. Second hand cars might be bought by going for the neighborhood dealer, hunting in the classified ads or checking out the a variety of internet sites that enable an individual to search and get a vehicle on the internet. Have in mind all of the expenses of bidding – you will need to pay buyer’s premium (from 5 to 10 % of the bid), or a registration fee for your auction. Whilst you can find an enormous amount of listings for private sellers positioned everywhere from nearby newspapers for the World wide web, buying from the dealer will provide you with a lot more protection than shopping for privately. According to Yahoo, the present national typical for a automobile loan is 5. When acquiring privately be certain that you simply find out as substantially as you’ll be able to concerning the make and model of the distinct automobile that you are going to look more than. government car auctions All vehicle companies offer warranties, so ask the dealer if that warranty might be added onto the vehicle you intend on getting. Hence, you may uncover a lot of low cost car or truck deals on repo car auctions. A typical tactic utilised automobile dealers rely on is telling you that they’re able to not go any lower on the price or they won’t make any cash. You will discover value estimates on sites like Kelley Blue Book. Just from a single or two times abstaining from borrowing income to get a brand new car a customer can possess the cash in the bank to purchase all their cars new, if they so need. It is possible to get quotes from both sources really simply by going to their web site on-line also.\nThat implies that you may get a reduced interest rate, much better terms, and a single that you just qualify for as an alternative to being turned down. If they don’t know or you really feel they may not be telling you the truth, you could come across this info out. If that’s the case the dealer likely painted more than any blemishes to create it appear greater than it is. The other side of this argument is the fact that an further variety of made use of cars need an further operation and maintenance charges when compared with a new car. Often instances you will discover special financing rates available on these cars. Never ever seriously shop for a employed car with out taking somebody with you who knows about shopping for cars.\nSo for example should you are going to purchase a Toyota, you are going to most likely get the top auto at a Toyota Dealership. You may need to act like a horse trader inside the old west. This is a thing to recall when contemplating a automobile that is two to five years old. You may purchase it for any a lot reasonably priced value at government-sponsored auctions. Nevertheless, most made use of vehicle dealerships are with the budget range. In fact, as quickly whilst you leave the dealership, your new car is suddenly worth $1000-$2000 much less.\nA minimal charge could be charged, but this is unquestionably worth the search simply because it will let you see just how much the auto has been use, if it features a clean record, or if it has been taken cared of by its past owners. The brake fluid need to be yellowish to light brownish, just like the colour of tea. Using the advent on the internet came opportunities for individuals to get access to points that would not commonly be accessible. In most cases, the warranty will state exactly what things are beneath warranty for instance the engine or transmission, to get a certain quantity of months and also the dealership will cover all components and labor. It extremely often implies that these cars are getting sold off at an extremely low cost also. If these are not in fantastic working situation, it might bring about a mishap when you’re attempting to drive it on the rough or bumpy road.\nQuite a few persons basically use this to begin a company of buying and selling cars. Nevertheless, you could possibly obtain it substantially more affordable via some particular channel. The financial crisis, that lead to economic troubles for a lot of, is still not over and 1 can search for a fantastic bargain in Florida, as well as all more than the United States. Whenever they see you as knowledgeable and shrewd, they’re going to know they can not push you about. The salesperson can see just how much you would like the vehicle and this may provide them with the edge. The issue you are going to face is the fact that you will be competing with these dealers on their own turf, and this can be a thing that you may be unable to manage. government auctions They choose to ensure that that you are content as being a entire together with your choice. If you are buying employed cars while your pals are driving showroom-new autos, then you may perhaps feel a feeling of envy. Further solutions and assistance is usually found with used car or truck dealerships. Because the clock ticks, the would like to have the selected automobile doubles. Government bodies and federal agencies for example the FBI, DEA and police departments are regularly seizing autos. While you might be capable of locate an incredible deal on the internet, in quite a few circumstances it wouldn’t be sensible or perhaps possible to view the car in person ahead of handing over revenue.\nThese autos are regarded as liabilities and for that reason the longer the banks or government authorities hold these autos inside their possession the extra revenue they loose in terms of car or truck worth and upkeep expense which explain the explanation why there’s severe have to have to dispose off this cars speedily and that is where the good offers come into location for the buyers. Regardless of whether you’re purchasing a very first auto for the young children or thinking about upgrading an old and worn out automobile, a used car or truck may be the smart selection for an intelligent buyer. Now it is time to in fact discover many of the advertisements, and check out some cars. Newspaper ads and auto magazines are terrific places to get a good concept on pricing and bargains offered by automobile agencies for acquiring used cars. You’ll be able to get unlimited uses to get a month for any fairly reasonable price tag, so you are able to check out a large number of prospective cars as you happen to be shopping. To discover out no matter if the vehicle features a checkered previous, you need to get a car history report.\nIronically adequate individuals who obtain brand new cars have just as much of a likelihood of taking their car in for repairs as those that have bought used cars. For many people, going to made use of cars dealers to hunt for a affordable second hand cars for sale would be the natural thing to accomplish. When you have found a “bargain” or maybe a car you just like the look of go verify it out. The auto could even want repair operate carried out on the motor. Purchasing from the new-car dealers trade in is almost certainly going to be by far the most high-priced approach to obtain a utilized auto. Japanese made use of cars will also be preferred due to the fact they may be not simply low-priced but have a sleek comfy really feel.\nYou could possibly switch around the engine but never ever ever test-drive as it just isn’t permitted. When getting a utilised automobile, the exteriors are significantly less essential that what is inside. So, it is completely vital to have it checked by a mechanic. The auctions these modest time dealers are shopping for are essentially bottom from the barrow autos, for very good auction resources see the bottom of the page. Financing also can make it feasible for you to keep some money inside your pocket and break up the total buy of your intended car over the course of month-to-month payments. Applied cars are often the far more tempting option.\nThey may sell normal cars, or trucks and even farm machinery and recreational and off road automobiles like snowmobiles. Applied cars, even when only each year or two old are substantially less expensive in comparison with new cars. Not just the obtain of those employed automotive parts, you might sell the cars in the internet websites described above. For a single, you may probably invest funds on repairs since employed cars usually do not include any warranty. then only go ahead and seal the deal to get the automobile. Also via this, the non-public salvage auto traders will also get benefited. government auctions It ought to be cost-free associated with any forms of greases, debris, oil as well as other outer elements. Although this may possibly sound as mere popular sense, but using the number of utilised cars out there along with the tends to make could make picking a car very tricky. As soon as you know what your auto will be worth, and what car you’d like to get and what it is worth as well, you might start shopping. Before you commence your search, you ought to prepare a list of the make and example of cars you’d take into account. The chance offers you a possibility of owning what you want. It is now being replaced by a newer 1 that functions significantly superior.\nNumerous dealerships also give trade-in possibilities. Now the first question that arises is how is it achievable to get these automobiles at such higher discounted prices. Check into these troubles prior to acquiring a car or truck that may be approaching a mileage variety that’s recognized to make flaws. They look and operate on cars every day and must be capable of spot a lemon a mile away. The greatest benefit of purchasing at the employed automobile lots is that they frequently have the greatest and best choice of desirable cars (low-mileage, late model). You will need to appear at many diverse utilised cars, and any that interests you should be inspected by a mechanic.\nEveryone looking for a thing more trustworthy or wanting to get much more for their revenue will locate something at this kind of dealership. The key goal at this stage of your procedure would be to test drive the automobile and be sure it is within fantastic condition–it will not be time to obtain however. This is some thing to don’t forget when thinking about a vehicle that is certainly two to 5 years of age. One other point to consider is that today’s cars hold up remarkably properly with well above one hundred,000 miles displaying around the odometer. List down the Car ID numbers in the cars that you simply look to become serious about. The truth is, as soon whilst you leave the dealership, your new car is all of a sudden worth $1000-$2000 significantly less.\nIn case you have an accident, however, along with the insurance enterprise only gives you precisely what the vehicle may be worth, then you happen to be going to be left owing numerous thousand dollars. Ask the dealer for it and ensure that that the car or truck didn’t meet with any accident inside the recent past. They may have already had their car or truck repossessed, but should they personal their car or truck out correct, or have largely maintained their car payments, it is possible to come across some genuinely wonderful buys this way. The auctions these modest time dealers are obtaining are basically bottom of the barrow autos, for very good auction resources see the bottom of this web page. The vehicle could possibly be stolen, or it could be damaged in some way that may possibly not be immediately evident or detectable. On-line bidding is really a speedy, effortless, hassle-free and streamlined bidding process.\nWhen seeking to buy an old vehicle, its working situation ought to be checked. Needless to say the type of vehicle you would like and what you can in fact afford might be two totally diverse issues. Repairs from little crashes could serve applied cars fine for the rest with their lives, but it’s crucial to be sure it was never ever inside a substantial collision. It is suggestive to discover out about the internet site you will be participating in, to purchase your accessories. The best approach to see the most recent supplying of autos at any dealership is always to take a look at them in individual. Performing so is essential so that you’ll go household with a decision car and never a rundown monster. find a car Shopping for a brand new vehicle just isn’t a thing 98% of your persons available will need to be carrying out. Of course, getting an automobile of any kind is usually a enormous investment. It’s impossible to understand whether or not or not you’re obtaining a very good deal, unless you understand what the price in the car really should be. Some cars could be sold “as is,” in which case you need to take added precautions before you decide to hand more than any of your cash. This will let you know if the auto has been stolen, been within the and accident, or is on finance. There’s seldom an individual that will sell his best car or truck.\nHere are some important guidelines for wiser spending on utilised car or truck auction. May be the car not just gorgeous on the outdoors but in addition impressive on the inside. Daily, thousand of cars are becoming seized or repossessed by police or banks and getting a spot to store these repo cars would price an huge quantity of dollars. The uncomplicated cause behind this high price tag is the fact that the existing owner from the car had taken the proper care and maintenance of his vehicle along with the auto is within superior state to sell. The biggest advantage of purchasing at the employed automobile lots is the fact that they frequently have the greatest and very best selection of desirable cars (low-mileage, late model). Also search for excessive wear patterns around the front tires.\nThat is simply because credit scores are universally utilized in qualifying buyers for new car purchases. Normally, they feature seized or repossessed cars that have been confiscated and forcefully taken from the government or banks simply because the original owner need to have failed paying dues or because of grave misconducts and offenses. This really is usually an indication of physique function that was performed to cover a problem. They may become a trader wanting to pose as a private seller. Third, find out what rates of interest are presently offered at regional credit unions. You may search on the internet for critiques at car forums, with consumer reports, or chat with other individuals which have the car or truck now or owned 1 at sometime.\nWould you count on a car or truck you owned from new for any variety of years to possess accrued a comparable amounf harm. When buying a applied vehicle, the exteriors are much less significant that what is inside. Such an auction presents a large number of cars for bidding from numerous various places. You can find only a great number of new autos to become released each year. Also check the water reservoir for indicators of oil, not a very good sign. Since the finance organization is desperate to acquire some kind of money for the auto they’re prepared to accept what ever is presented.\nAs soon as you have made make contact with using the seller and have gone to verify the auto more than, it is essential that you get to find out all documents associated with the cars history. Some people are inclined to overbid out of the pride to win a bid even if the vehicle will not genuinely expense as substantially. The very first issue to verify is normally the year of manufacture and the mileage on the vehicle. Buying a utilised car or truck could be a very good choice, offered that you buy a auto which has been well-maintained and cared for. Ultimately, ask your mechanic to look for preceding damage. In case you acquire a automobile on impulse, it may be the wrong car for you personally. find a car It need to be absolutely free associated with any varieties of greases, debris, oil and other outer components. Moreover, you’ll be able to lower costs by choosing a mechanic that you simply will use within the future for regularly scheduled maintenance and who might take into consideration providing give you a specially decreased priced to the inspection. Each vehicle requirements great brakes in addition to a employed auto is no distinct. It is possible to just go along and take your time in hunting in the cars and perusing by way of their components. This very same factor could be applied on the case of employed cars also. Do they inform their clients the history on the automobile.\nThis can be why they’re very lucrative and there’s generally someone prepared to start one up inside the neighborhood. This need to often be remembered before purchasing a made use of vehicle. Shopping for a applied car or truck is usually an thrilling as well as intimidating experience, and all too normally shoppers invest in a automobile for way also considerably revenue in comparison with they need to. Newspaper ads and auto magazines are fantastic locations to obtain a good concept on pricing and bargains offered by auto agencies for acquiring employed cars. If there is certainly not somebody readily available to complement you, take the car to a third celebration automotive shop and have them take a appear over the vehicle. Automobile auctions are excellent venues to seek out cars should you are on the budget.\nFor instance, you could invest in a employed sports auto that expense more than eighty thousand dollars a couple of years ago, when it was new, for as little as forty thousand dollars. Do not be afraid to allow the dealer know what other dealers have supplied you (no down payment, 7% interest, a free of charge tank of gas, and so on). The status with the fluid check will let you know if the automobile was maintained correctly and if it is within fantastic enough condition. You’ve made a modest down payment, and you have committed to month-to-month payments for the automobile. It is because of this that most dealerships contain a “negotiation pad” in what they use as their markups. On the other hand, when you take your family of 7 on trips even though towing your boat, a Suburban will be a fantastic car for you personally.\n1 with the most effective and normally overlooked outlets for getting applied cars which are priced beneath it really is trade in value are public auctions. You earmark it and swear to yourself that someday you’ll have that automobile. Irrespective of whether you prefer an American automobile or your tastes run to foreign automobile, you may find possibilities for any preference at a sizable well-stocked dealership of utilised cars. All this depends upon the degree of comfort that one may have whilst purchasing an older vehicle. Also check the water reservoir for indicators of oil, not a superb sign. For those who tell dealers you saw a single of the cars listed for X amount on the net, they need to honor that price.\nHowever, strategically obtaining used vehicles can be a sensible monetary decision. A single more factor you shall care for is that often try to find the indicators of the engine overheating and really should ask the dealer when the vehicle includes a history of overheating. A utilised car or truck could be bought from a employed vehicle dealer, directly from car or truck owners, from brokers or from government sources. There are numerous lots brimming with shiny made use of cars for most metro places. When going to appear at some sort of second hand car sold by a private buyer you’ll would like to think about taking somebody with you who knows about cars. It is observed that numerous men and women prefer to get a employed auto, as it is obtainable for a less costly value, than a completely new one particular. cheap used cars for sale Soon after that appear at the coolent and it should be filled as much as the brim. You are able to also ask the dealership to the car’s service receipts to discover out additional about its history of mechanical troubles. Price may be the greatest advantage when it comes to acquiring utilized cars. With all the rising price of extras, it is now tougher for persons to find cost-effective rates even for pre-owned or applied cars. They say there is an air freshener you’ll be able to buy for that new car smell. In recent times, the number of vehicles seized by the government have grown exponentially to the point where the government can not afford to keep and maintain each of the seized cars given that it cost cash.\nIf they are fairly worn, program on acquiring a brand new list of tires and issue that into the price tag you will be willing to pay for your auto. It doesn’t happen, though, once you do obtain previously owned. The Insurance Institute for Highway Safety does some quite great tests to decide the automobile safety within a variety of diverse collision circumstances. Vintage cars are offered inside a finite and dwindling quantity as time continues to erode on their own availability. They should pull the car or truck firmly to a cease within a straight line with no fading or feeling as if they are getting ready to run out. That way you could negotiate the price, considering that commonly the markup will be close to $4,000.\nYou understand the type of car or truck that you’re looking for, you understand the condition that you just will accept, and also you have a great concept by what price tag you ought to be paying. When naturally this will price you inside the extended run it can work out less expensive if the vehicle is absolutely nothing more than an old banger. For this reason your insurance coverage expenses will likely be substantially less, furthering your savings. You realize what your auto may be worth and you know how substantially you ought to be expected to reasonably spend to the vehicle you wish. It gives you the luxury of sitting at household and bargaining for your auto you desire at the most effective attainable price tag. Shopping for a vehicle may possibly sound like an ordinary affair for many however the truth is the fact that it frequently gets as well complex particularly with countless brands and models to choose from.\nAlso spend close focus for the glass and particularly towards the tires to view if they’re all proper or threadbare. When you’re only considering having a very simple family car to use in urban places where the roads are considerably improved, you may merely go to get a very simple station wagon or sedan from several popular brands obtainable inside the industry. Nevertheless, using the financial decline in America this perception has fully changed. When rebuilders are within a hurry to place a salvage automobile back collectively, they might not be so cautious with repainting the whole car. A huge number of cars are seized every month in the United States. They are rigorously maintained and generally driven by mature folks not most likely to hot rod them about.\nGarage hobbyists will normally be eager to seek out 1 of these yards simply because they will not choose to go out and invest in spare components. Having said that, you’ll be able to get it significantly more affordable by means of some specific channel. Additionally, lots of vehicle dealers give reduce prices on the net as compared to on their own lots. They’re sold as-is with no warranty and no guarantees. Then start the auto and verify that the air conditioning blows cold, and the heat is hot. The problem you will face is that you’ll be competing with one of these dealers on their very own turf, and this is one thing that you simply might be unable to manage. cheap used cars for sale Do a background verify around the particular person you’d like to handle. When buying anything of substantial worth it is generally most effective to consider all attainable angles before sealing the deal. You’ll be able to generally get a fantastic deal from the private party. Driving the auto off the lot and round the block isn’t a test drive. Government bodies and federal agencies for instance the FBI, DEA and police departments are regularly seizing automobiles. While you could possibly have the ability to find a terrific deal on the web, in quite a few instances it wouldn’t be sensible or perhaps attainable to find out the car in particular person before handing over income.\nUnless you determine to lease a automobile the quantity of cash it’s important to put down on a new car is normally quite substantial. 1 beneficial tip should be to initial turn on the radio to make sure it performs, then turn it off for your remainder from the test drive. You will need to choose exactly where you wish to seek out your car or truck. But when the cost has gone also high, overlook about it. Some rusted parts may possibly need to be replaced to ensure that the car or truck to be protected and function properly. That way you’ll be able to negotiate the cost, since normally the markup is about $4,000.\nThere is no point in starting your search until you understand just how much funds you need to spend. The primary aim at this stage from the approach is usually to test drive the auto and make certain it is within excellent condition–it just isn’t time to invest in yet. On top of that, applied cars will not be subject to sales tax, which, for new cars, is as a lot as 7% from the purchase value. For starters, you may need to list the options you expect inside your automobile of choice based on its intended purpose. Even though you could possibly not be able to test drive cars during the inspection you can unquestionably have a look at each and every nook and cranny in the cars and it is ideal to make the most of this chance. It is rather regular for employed cars to possess had various prior owners so usually do not be put of by this, but do verify the cars log book and service history very carefully ensuring the documents will be within order and all the dates and records verify out.\nThis really is yet another great time for you to get your hands on dirt low-priced second hand automobiles that have been properly looked immediately after and nevertheless have lots of miles left in them. As soon as you’ve decided what form of vehicle suits your requirements the top, narrow down which vehicles in that category are going to be by far the most desirable. If what you’ll need will not be in stock, the dealers can order it from the factory. A new car depreciates rapidly within the very first few years and just after three years, it may be worth just about 60-70% of your original price tag. For those who are pondering of buying a employed car or truck, it would be very best to thoroughly investigation the existing vehicle market to avoid getting a applied car with critical defects. If it just isn’t an automatic car, then the gearshifts should really be simple to adjust.\nThey may well sell common cars, or trucks or even farm machinery and recreational and off road cars like snowmobiles. You could also invest the cash toward your retirement, or you could possibly save it and pay for the next automobile with cash. You can find websites on-line which provides a simple on the net look for utilized cars purchasers on government auto auctions in various nations, states and cities. There are actually a huge selection of lots brimming with shiny utilized cars in many metro regions. He could know some inside information and facts of value concerning the bank repossessed cars, and is willing to pass it on to you for some fee. DMV’s charge much less for registering cars that happen to be greater than five years old, and you can save a couple of a huge selection of dollars per year that way. car auctions That is an incredible method to commit much less but nevertheless get a lot more. You will be able to figure out a answer or at the least turn out to be informed swiftly. A brand new car or truck may come with difficulties related with poor style or manufacturing defects that may well happen to be already repaired for the duration of the warranty coverage period if it’s a applied car or truck. This is why it is significant to understand how much the dealership has put into the auto. Verify the steering wheel, and accelerator pedal rubber for excessive wear, the clutch and brake pedal rubbers can be replaced, however the accelerator pedal is often a lot tougher to adjust, and can give a truer indication of mileage. The car’s suspension, which involves the shocks or struts, must be in decent shape due to the fact this is what supports the 4 tires on the automobile.\nAfter you go to look in the vehicle make sure that you simply give it a via inspection in very good lighting and that you simply take it to get a test drive. When you can recognize a great number of monetary benefits by acquiring applied cars, your neighbor’s sleek new ride may perhaps not appear so snazzy right after all. Put all this out and clarify for the dealer that you desire this auto just for this price with this payment program. And one particular a lot more issue, do not hesitate to get utilised automobile on line in case your new car or truck purchase quote from Cars – Direct is reduce than the car or truck dealer. It seems that these cars had been obtained from folks who were caught red handed. So you just have to pick which payment term is ideal for you personally.\nOne final step to become taken while doing all that is to have the automobile checked out of your mechanic. This innovation has also been responsible for bringing within a great deal of new enterprise. In the end you are going to have the ability to get the car you want in the very best price probable, and understand that it is usually a top quality automobile once you get it. If the paint job has not been well-done and you can find distinctive shades amongst panels or the paint is peeling or cracked, it will need to have to become repainted. You are able to get cheap used cars from second hand car dealers, check the classified advertisements for cars on sale or use e – Bay where you can find people today selling low cost cars. With every little thing that’s possible and supplied, locating an excellent vehicle and enjoying it is going to be a simple task.\nWhen getting a particular used vehicle you’ll want to have a excellent notion of what to anticipate. It really should be remembered that used automobile dealerships sell all types of cars. If you need to push yourself 40 miles a day to perform, a Chevy Suburban is possibly not your finest selection. After you visit a applied vehicle auction, bring a long an auto guide for example the Kelley Blue Book to ensure that you can go about looking for cars with a guide at hand. Credit unions that usually do not commonly enable rate increases for dealer profit, offer flat costs to dealerships. The CPO plan had provided used vehicle buyers the assurance that they’re obtaining a automobile that is certainly valuable and never additional of the headache.\nFind out if it looks just like the car’s underside has been areas you would not take a auto you loved. When you make a decision on variety of vehicle you will need it is time for you to do your study to narrow down the selections. It’s shrunk to the point where a lot of huge area newspapers have only two or three pages of used vehicle classifieds. The mechanics will normally check the door jambs or car or truck panels if you can find components which have darker or lighter paint. Well, that may well happen, but it’s the really rare exception. Then the particular person who buys the auto utilised may get a great auto for a great deal much less than the new wholesale prices. car auctions One of the very best guidelines when getting a vehicle from the private dealer would be to spend a little charge to possess a car data check executed. The following biggest benefit you could obtain is the fact that the original manufacturer’s warranty for the buy could also nonetheless be in effect. That may be a tall order; discovering a low cost, applied automobile that also fits the above criteria, but it is often completed, you just have to exactly where to look, and how you can shop. Lots of lenders have put their inventory on the internet. Since there are numerous thousands of pre-owned cars inside the industry, you may need to create positive which you never end up using a lemon. Though you may be able to uncover an incredible deal online, in numerous instances it wouldn’t be sensible or perhaps possible to determine the car in person prior to handing more than funds.\nYou’ll be able to acquire made use of cars that happen to be in excellent physical and mechanical shape just by checking out the inventory of a top quality dealer. This should often be remembered prior to purchasing a employed car. You must discover concerning the rules before you make your bid. New cars are normally additional costly than utilised vehicles. When it comes to shopping for made use of cars, you could possibly be questioning if this can be a superb selection for the specific requirements. Purchasing a utilized vehicle for commuting is preferred, in order that you don’t must spend also a great deal of cash on it.\nEven if you don’t intend acquiring the auto on the net this really is a fantastic starting point for suggestions on how much the car or truck roughly fees. You’ll find thousands upon thousands of made use of cars as well as other cars all more than the country and with all the popularity of your world-wide-web, the majority of these cars are advertised on the internet. This really is one thing to try to remember when taking into consideration a automobile that is two to five years old. There are many web-sites which deal specifically in promoting second hand cars, here you are able to choose the location in which you want to confine your search, either locally or countrywide according to how far you wish to travel. On the other hand, considering that a good deal of made use of car certification applications have been sprouting out, ensure that you need to do some research just before lastly settling for a single. Many times, this warranty will likely be for a specific amount of months or miles place around the auto.\nMost dealers promote the cars they’ve for sale on their very own internet websites and on generic internet websites like cars. When dealers can introduce financing and monthly payments into the equation, accurate sales and trade-in figures get much tougher to pin down, so getting advance financing can hold the deal very simple and save you revenue. When you’re acquiring a used auto, ensure that you just check the VIN written around the vehicle title matches with the number found in the base of your windshield. Moreover, check the trade-in value for your automobile just to remind your self what the dealer likely compensated to the car–it might be thousands significantly less than the sticker price tag. Lots of occasions, you may need to have a down payment or superior credit as a way to get a loan. Also listen carefully for virtually every uncommon or strange noises.\nOne has to evaluate prices from the exact same vehicle at unique areas. Many people tend to overbid out of their pride to win a bid even though the vehicle doesn’t genuinely price as considerably. With the above sentiments in consideration, your choice of a brand really should be pegged on its capacity to navigate in specific areas. Browsing via vehicle magazines is actually a hobby of lots of guys. Lastly, ask your mechanic to look for previous harm. The choice can variety kind outstanding to really restricted. buying a used car The cost in the utilised cars is more affordable however they are subjected to additional queries from the buyers. Be sure to make a thorough visual inspection of each and every car that meets your criteria and make notes as you do so you could recall what your impressions were about every auto that you looked at. For just a few bucks a year, you could conveniently search by way of lists of hundreds to a huge number of autos of all makes and models which might be available inside the market now. Hold buying until you have 2-3 cars that are excellent candidates for obtain, as well as may be purchased within a fair value variety. You’ll wish to maintain your options as open and varied as you possibly can. In the finish on the bidding, you could possibly personal the car or truck, you wanted to, but at a great deal larger price tag than you can afford, or perhaps the scenario demands.\nSeveral individuals dream of acquiring a cheap, great, employed car. When you’re in fact hunting in the car, kneel down and sight down the car’s physique lines. Most people do not know that there is a choice to save greater than 1,000 of dollars when they will need to purchase a classic car or even a luxury vehicle. Then take note in the auction house’s inspection day too whereby you will get the opportunity to inspect the automobiles of one’s selection to figure out its situation just before your final bid. One other new item that has been introduced into this business model is the fact that these dealerships may also supply to buy your automobile or truck from you regardless of whether you invest in a car from them or not. Many people believe that they must pay low for a money sale since sales managers will choose it so that they are going to have the ability to hide the money acquire or preserve a portion of it.\nThis class includes a majority of four-wheel drive cars that are advantaged when it comes to maneuvering in muddy puddles and rough roads. For many men and women, going to made use of cars dealers to search for a low cost second hand cars for sale could be the natural point to do. Maybe a brand new car appears like the obvious option, but you can find some incredibly significant positive aspects of obtaining a used automobile, associated with cost, upkeep and insurance, which ought to be looked at by every person who believes that new vehicles would be the improved solution. Considering the fact that purchasing a brand-new vehicle just isn’t always feasible several car purchasers will get started looking at utilised cars. Obtaining a car inspected will not be guaranteed to prevent all worries, but it’s your best bet to stop difficulties at a later date. Dealerships, whether they may be selling used or new cars, depend on people with sales education, including graduates from and auto sales college.\nThis really is some thing you have got to choose, but new tires would be the suggested tip when shopping for a employed automobile. By the time a car is becoming resold, all of those troubles must have surfaced and not come as being a surprise. Your down payment is usually ten percent, but for those who put significantly less income down up front your month-to-month payments will likely be larger. What about some much more inventive approaches to obtain an incredible, inexpensive utilised car or truck. Should you are pondering of acquiring a used car, it would be ideal to completely research the existing auto industry to avoid purchasing a employed car or truck with significant defects. It is generally superior to get a automobile which has done less mileage because the put on and tear around the components will not be as much.\nThe first is the fact that cars once purchased and driven off lots promptly depreciate. Normally the aspects that should really be deemed although getting a car are the price tag, the make and model in the vehicle, the situation, the mileage, repairs necessary, security and emission testing and so on. This really is one particular issue which will make or break how much you’ll have to pay in interest. Almost everything will have to go, typically resulting in absolute bargains. Perhaps you would like to attempt out a automobile mainly because you really feel a new auto may possibly be taking a little of the opportunity. If you would like more facts, then you definitely can also participate in the forums and ask the clients about the cars they purchased from the dealer. buying a used car Enhancing the auto would further outcome to added charges passed on to consumers. At this stage it is often valuable to take an individual who knows anything about cars with you in the event you can. That can be a tall order; discovering a low-priced, made use of auto that also fits the above mentioned criteria, but it is often performed, you just need to exactly where to appear, and tips on how to shop. That is why it is very important to know just how much the dealership has put into the car or truck. That is certainly lots of cash to purchase a different nicer and newer car. Several law enforcement agencies sell off cars confiscated as outlined by home forfeiture laws.\nTry to come across their numbers in the yellow pages of your telephone directory. Will be the car or truck not only beautiful on the outside but also impressive on the inside. When it comes to obtaining a previously owned vehicle, purchasing from utilised automobile dealerships is normally safer in comparison with purchasing an automobile from the private seller. That is commonly where you will obtain your finest deal on Net auction web sites. The most significant advantage of shopping at the utilised vehicle lots is the fact that they normally possess the largest and very best choice of desirable cars (low-mileage, late model). Other tell-tale signs which may well show that the made use of vehicle is actually a salvage vehicle include mismatched physique panels, sloppy repair work and mismatched tires.\nRates of brand-new cars are so stiff that owning one particular has turn out to be much more of a dream to individual consumers. The federal government will provide you with one particular totally free tri-bureau credit report every year at annualcreditreport. Only after you decide to buy newer cars that you can focus on the sleek and shiny form of the automobile for the reason that new cars have impeccable engines assured. You allow your self to commute day-to-day in your hometown. From all of the investigation you’ve got done you ought to possess a superior expertise with the auto and its worth. Dealerships, irrespective of whether they may be selling employed or new cars, rely on individuals with sales education, like graduates from and auto sales college.\nThis type of car is no longer required to ensure that there is certainly no a lot more space for it in the government’s parking spaces. Cars at some sort of salvage yard are not categorized or stripped. The secret is : mainly because that is an extremely protected source of revenue for your majority of vehicle dealerships and isn’t advertised to the general public. A whole lot of rot, particularly to structural places with the auto where panels and sections on the car or truck come together could indicate the car or truck will not be safe to push. He says that these cars will be in good condition considering that they are luxury vehicles that nobody would dare let visit ruins. This could help confirm the accidents the auto has been in, in the event the vehicle was reported stolen as well as the earlier owner with the vehicle.\nThey may be a luxury product that is beneficial not just to hobbyists, but also for historically accurate motion pictures that do not wish to create replicas. There is certainly also a flaw in the thought that you will maintain an automobile for 10 years. The chances of you acquiring the car you may need, inside your budget, are pretty superior. You may have noticed ads from auto dealers and producers offering cars in a fraction with their original price or on particular supply, but in many cases with these gives the buyer ends up paying the cost somehow. If dealerships marked cars with the prices they really wanted to sell them for then folks would come in and try and haggle under that level. Should you comply with these uncomplicated recommendations you may generally negotiate the very best value for the best cars, and remain in comprehensive manage in the entire acquiring procedure while you do. find cars The magnet will stick for the metal, but will fall off if it meets physique filler. Following browsing more than a huge number of advertisements inside the newspaper or peeking at some sort of handful of cars on the lot, you likely have located a minimum of a single that you simply will be considering. Therefore, now that you have an notion of a few of the homework you are going to need to have to complete before you decide to truly get a low-priced (or any) vehicle, where can you locate one particular. If it really is milky, there is possibly coolant within the sump, and if it contains flakes of metal, which suggests the engine is tearing itself up. Then you definitely stop, take a deep breath, due to the fact there is that darned dream auto yet once more. When you never want to embarrass oneself and end up wasting your challenging earned funds, then you definitely need to have to method the auto purchasing approach with caution.\nShould you know you might be going to will need financing so that you can purchase the employed auto you have in thoughts, then it would be in your best interest to shop on the internet for any vehicle loan. Moreover by getting a pre-owned automobile, you may save as much as 20 percent or much more more than the obtain in the identical car or truck new. Thoughts just like the maintenance in the vehicle, repairs necessary around the auto and the amount of revenue invest around the auto for creating keeping it in appropriate state will always remain inside the mind of the purchaser. If everything is within great situation as well as the contract is effectively termed, then, you’ll be able to attest that affordable applied car auctions seriously are good venues to buy second-hand automobiles. It is understandable that you’re eager to ride around in a automobile, but that doesn’t imply that you simply have to acquire the pretty initial ones that you encounter. You may need to look at many various used cars, and any that interests you should be inspected by a mechanic.\nIf any dealer doesn’t make an effort to meet those figures, just stroll away and go elsewhere. You will be capable of check if it has had any body damage as the light reflecting off the side with the car or truck will show the dents or replaced panels. Financing choice is additional profitable for dealers simply because when they manage the financing, they receive the payment by way of electronic transfer within days, that is as great as cash. Should you purchase the new car for $20,000 and finance the buy at 5 percent interest, then you happen to be going to spend an overall of $21,000 before you decide to personal the car totally free and clear. Men and women are extra likely to possess a smaller down payment up front as well as being a reduce finance value. This decreased the sale of new cars but additionally aided inside the success inside the corporations of applied auto dealers.\nAs soon as you get dwelling, it is possible to look for the Car ID on Carfax to verify out its history report. But at times they will interest in the additional cost as when compared with the car dealers. A new one is just that, brand new, using a complete warranty, no miles, and an outstanding capacity for you to break it in. Due to the reason that the mechanic is definitely an expert in his field, he can do all of the checks appropriately and offer you the proper feedback. Keep away from cars that have an excess amount of physique operate or you are risking a car or truck with major structural difficulties. Shopping for on the net salvage autos is one of the easiest and convenient solutions to locate those classy beauties that are frequently left uncared for and unattended.\nTake a fridge magnet with you and check the bodywork for filler. Mileage is definitely an significant detail you’ll want to in no way miss out. An improperly cared for car may be undesirable for you. Could it be as a result of truth that the car or truck has some issue with it. The salesperson can easily see how much you wish the car or truck and this will provide them with the edge. Seeking for a made use of car or truck to buy but do not appears to become able to obtain 1 which is inside your means. find cars Do a background check on the particular person you’d like to take care of. This is a standard component that is certainly replaced at service and can indicate how the owner has been treating the car. Then go to the subsequent finest deal in your list and repeat the final inspection process if necessary. These add-ons could involve, cost-free detailing services or free of charge access to 24-hour towing services, amongst other soon after sale car or truck services that may offered to consumers. By creating this type of visual inspection of every single automobile which you seriously take into consideration, you’ll be able to establish in advance no matter if you should now move to the next step where you might have an independent mechanic thoroughly inspect it mechanically for final consideration. It also allows you to observe firm they’re about the deal they may be providing you.\nGo into the car or truck dealerships for yourself and ask as lots of concerns whilst you really feel like to understand the ins and outs on the automobile you need to invest in. This was due to the fact employed car or truck dealers had an had been painted inside a negative light. The Insurance Institute for Highway Security does some incredibly very good tests to determine the automobile security in a range of distinctive collision scenarios. The next point they should take into account is definitely the price that they’ve paid for repairs and reconditioning the vehicle necessary. Other individuals often put a bit much more effort into producing their autos more appealing. When you are looking for any sports auto, an costly vehicle or maybe a classic then you definitely may verify out auction web-sites as an alternative.\nA fantastic approach to gauge this can be to go online and have a look at one thing known as the Kelly Blue Book. This innovation has also been accountable for bringing inside a lot of new enterprise. You may need to accomplish analysis to discover a employed vehicle that is in typically fantastic driving condition. Alternatively of envying your friends’ shiny new SUVs, let them envy your healthy bank account. Alternatively, there are plenty of used cars available on the market that can match all your needs. It applied to become that shopping for utilised cars was just anything that just about nobody engaged in but those individuals that have been around the lowest of the lowest financial rungs of society.\nTake your time and do not rush into a buy simply because you think you can drop the sale. These function many of the lowest prices cars anyplace and automobile sellers in these auctions consist of government and banks. Broken automobiles are either premature end-of-life vehicles impacted by collision or all-natural calamity, or they may be natural end-of-life vehicles that have retired from roads immediately after years of in depth use. In most cases, the warranty will state just what items are beneath warranty for example the engine or transmission, for any particular quantity of months and the dealership will cover all components and labor. The purchaser have to ask the dealer to find out it and if it isn’t available, then you should really make contact with the dealership or repair shop exactly where many of the function was completed. If these are not in superior working situation, it may trigger an injury when you’re trying to drive it on the rough or bumpy road.\nThese dealers may give new and utilized models, as well as warranty protection to guard against future repairs for the semi-trailer truck. Surprisingly, these secondary markets are actually the exact same lenders which you had been coping with in the previous, in most situations. A great number of business enterprise people today look at trailer financing to acquire them. With whichever you select it is constantly significant to check out what you might be obtaining and make certain it complies with your local health codes. trailer financing Are you currently a truck driver who’s searching to buy your individual semi-trailer truck or trailer truck. Via giving these providers with commercial financing, they acquire a location inside the trucking neighborhood and therefore are much more in a position to compete with their competitors , by having the ability to provide high-quality service to their buyers. If you’ve got an established banking relationship, go over your plans beforehand and see what kind of financing deal you can get proper out of your bank. On typical, significant fleet owners sell trailers following five to seven years.\nWhen you finally have located the right used concession trailer for sale it really should be time to obtain financing. The perk of using a dealer is mainly because they at times offer you financing or can steer you within the proper path. Verify on the web for auction postings of upcoming auctions of semi-trailer trucks inside your region. In case you are keen on semi trailer sales, then go to a neighborhood dealer and see what they have to give.\nWhile some terms might contact for as much as 30% down on the semi-trailer which you need to buy, by undertaking a little bit of comparison buying, you ought to be capable of obtain a dealer who has less stringent down payment policies. Dealers obtain used trailers by way of trade-ins at the same time as the other 4 sources pointed out above. In performing so, you’re in a position to pick out your truck and drive it residence the identical day. Wholesale auctions are another approach made use of to dispose of off lease and repossessed trailers.\nSome lenders will offer preceding semi truck repossessions or off lease employed flatbed trailers to buyers with a incredibly low credit score, some as little as 525. For those who are acquiring a applied concession trailer then you can anticipate to spend as much as practically half in the value of a new unit. Individual dealers normally market place within a nearby or regional marketplace location. Undertaking so will let you pay your seller off in full, which may well cause him to offer you you a better price initially.\nThat connection may possibly get you a reduced rate of interest and an simpler approval method. As a result of the banking crisis, lenders have had to rethink their lending requirements, which open truck trailer sales opportunities towards the start-up providers, at the same time because the established ones. It just so occurs that a lot of of these lenders now have an excess of inventory on their books and they desperately ought to get these reefer trailers, dump truck trailers and every other piece of equipment back out around the road exactly where they’ll make them some cash. Considering that his overall performance is depending on the readiness and cost of operating the fleet, gear liquidation is just not a top rated priority, so he relies heavily on the expertise of dealers to sell gear. trailer financing Dry freight vans, platform trailers, refrigerated vans and tank trailers constitute a large number of this equipment. They’re able to offer you economic assistance at low rates of interest. If you have got an established banking connection, go over your plans beforehand and see what form of financing deal you may get ideal from your bank. Enclosed trailers execute the comparable functions of other trailers like hauling heavy goods and payloads.\nCar carrier trailers are vitally significant for some corporations that call for transporting multiple cars. The perk of applying a dealer is because they from time to time supply financing or can steer you inside the right path. Verify online for auction postings of upcoming auctions of semi-trailer trucks inside your area. Beyond function, van trailers offer national brands using the advantage of consistent low-cost advertising via graphics on the sides and rear of trailers, so newness and image are important things.\nIt might be rather difficult locating any good financing opportunities in today’s industry for any truck semi trailer, as the more standard methods of obtaining financing, for example via banks and lending institutions have began drying up. The price of a five-year old trailer that may perhaps have 75% of its beneficial life remaining is about half from the original value, so made use of trailers are typically a cost-saving alternative to most corporations that ship products. A smaller flat bed trailer is usually utilized in landscaping applications whereas substantial trailers could be used to carry heavy loads. Search for a lender who will write your semi-trailer truck loan in a fixed rate having a predictable month-to-month payment that you could effortlessly afford.\nA firm must usually have 90 days of operating capital when financing a truck or trailer. This gives a new enterprise the likelihood to start up or will give an current enterprise a possibility to grow and expand, even with terrible credit. Historically, this segment sells or re-leases trailers towards the finish user in the finish with the initial lease term. Also verify out the physique of your trailer for damages or future problems which could arise.\nThese dealers could supply new and utilized models, as well as warranty protection to guard against future repairs to the semi-trailer truck. Commonly applied trailer buyers consist of non-branded national providers, mid to small size firms, and owner-operators. Countless small business persons consider trailer financing to obtain them. With whichever you choose it is always crucial to verify out what you might be getting and make certain it complies with your neighborhood health codes. trailer financing You can also save cash by checking for semi trailers for sale outdoors of one’s area and also outdoors of your state. Most dealers are engaged in representing numerous lines of new trailer companies, giving repair services and parts sales, and selling employed trailers. Corporations prefer it to haul precious loads or animals. Delayed payment plans, plans that permit you to vary your payments in line with your “slow” seasons and “busy” seasons, rent-to-own possibilities as well as other payment plans all sound great, but they may not be should they end up costing you far more within the long run.\nIt by no means hurts to ask, as you might be pleasantly shocked. Purchasing a semi-trailer truck is definitely an superb way to invest dollars into your future. They’re rugged and powerful so as to haul multiple cars. But they have added function of protection for goods against outdoor environment.\nOftentimes, the only barrier to ownership of a semi-trailer is coming up having a important down payment. It is probable to possess all the functions needed to use your company and all without losing the monetary capability to continue your operations. It is subsequent to impossible to discover financing, much less superior financing on any form of commercial truck trailer. Unavoidably, banks and gear leasing providers will have to sometimes regain possession when leases expire or credit defaults happen.\nTTS says you will find 19,200 registered private carriers inside the U. This gives a new organization the chance to start up or will give an current business a chance to grow and expand, even with undesirable credit. Trailers possess a range of specifications and configurations that determine their use and set segments within the acquiring marketplace. Also verify out the physique on the trailer for damages or future issues that may arise.\nLittle organizations can keep money for future requires, including payroll, or unexpected expenses. Surprisingly, these secondary markets are really exactly the same lenders that you just had been dealing with in the past, in the majority of cases. No single participant has more than a 5% share in the market place. Over-the-road haulers, large rigs or 18 wheelers; no matter what you get in touch with them the reality is the fact that a semi trailer tractor can turn out to be an enormous loss to get a lender in the case of the repossession. trailer financing You are able to function off of this and enhance your probabilities at success or avert errors that you could make. With appropriate maintenance, the helpful life of the trailer can exceed twenty years. It never ever hurts to attempt and understand in the prior owner and their achievement and mistakes. The majority of these companies obtain trailers through the more than 1500 truck trailer dealerships inside the Usa.\nSpec the truck or trailer to fit your desires and keep within that price range. But it is attached to the cab as opposed to bumper to improve more stability. Getting capital to fall back on is crucial no matter how significantly cash you find yourself financing. They are available in distinct configurations to serve different purposes.\nSince nearly 80% of smaller company lease at least a portion of the products they will use, this is some thing to think about for your future enterprise requirements. The bargains offered may be either a reduce price tag or perhaps a reduce yearly percentage price, or occasionally it might be a mixture of both. Lenders are even negotiating with current owners to find a solution to enable them to keep their trucks and make payments so that the lender does not suffer a large, financial loss on repossessed trucks. Now the lender has to recondition the truck semi trailer or whatever was returned, and then they have to either re-lease them or sell them.\nThey often appear to experts to deal with their equipment management and re-marketing requires, like negotiating equipment returns, and transporting, storing, repairing and re-marketing trailers. Numerous commercial truck lenders are borrower-friendly even within this economy. Dealers will be the principal provider of utilized trailers to end customers. For tiny company owners this can imply an awesome deal as the down payments are typically low.\nTrailers possess a valuable life of no less than 20 years. Take time for you to read all of the fine print so you realize precisely what you are finding into. Commercial financing helps small corporations hold a cash flow that is particularly required for his or her demands. On the other hand, you still have to be confident that you just check all selections that happen to be available to you. trailer financing You may work off of this and improve your possibilities at achievement or avoid mistakes which you could make. With correct maintenance, the helpful life of a trailer can exceed twenty years. It never hurts to try and discover from the prior owner and their good results and errors. Most of these organizations acquire trailers via the over 1500 truck trailer dealerships inside the Usa.\nAs soon as you have identified the ideal applied concession trailer for sale it ought to be time for you to come across financing. The perk of applying a dealer is for the reason that they often offer you financing or can steer you in the right path. Incredibly handful of people today have sufficient income available for an outright cash acquire, so most will either enter in to a leasing or possibly a financing arrangement. If you are considering semi trailer sales, then stop by a nearby dealer and see what they have to provide.\nYou can find over 100 truck trailer suppliers inside the United states of america selling, on typical, 250,000 new trailers annually. It is achievable to possess all of the functions needed to use your enterprise and all without having losing the financial ability to continue your operations. It is subsequent to not possible to seek out financing, substantially significantly less excellent financing on any form of commercial truck trailer. Unavoidably, banks and gear leasing corporations need to occasionally regain possession when leases expire or credit defaults occur.\nTTS says you will discover 19,200 registered private carriers in the U. Market place fragmentation often benefits in inefficiencies inside the market with gear passing from the original seller to brokers, dealers as well as other middlemen prior to reaching the ultimate end user. Trailers have a wide variety of specifications and configurations that establish their use and set segments within the buying market. The sources available for locating a utilised concession trailer for sale on the internet are your greatest source for discovering the bottom cost.\nLenders have had to modify their lending practices and that typically suggests the terms of a loan are out of reach for the typical customer. Take time to study each of the fine print so you understand exactly what you’re receiving into. Unlike an automobile, exactly where style and image play important roles in figuring out value to the owner, functionality and condition are most important to quite a few truck trailer owners. Used Truck Trailer Supply Sources: The supply side from the secondary trailer marketplace is somewhat fragmented with no nationally organized distribution method. trailer financing You can function off of this and enhance your possibilities at results or prevent blunders which you could make. With right maintenance, the useful life of a trailer can exceed two decades. Either you are able to uncover concession trailers for sale in your local location, which may be complicated based exactly where you live, or you’ll be able to verify with numerous sources on line. You may also check out the distinct truck trailer makers and lenders on the internet.\nThey aid in straightforward hauling of heavy goods and payloads. Resulting from the intense price, a lot of firms seek out open trailer financing. Obtaining capital to fall back on is essential no matter how much revenue you wind up financing. They are available in distinctive configurations to serve different purposes.\nAssessment each and every credit report cautiously and really should you notice any discrepancies, obtain out how to remedy them promptly. They may be normally traded quite a few times in the course of their useful resides because they pass from lengthy distance service, to regional hauls, to local cartage use, and finally to storage service. It is next to impossible to find financing, a great deal significantly less fantastic financing on any form of commercial truck trailer. Unavoidably, banks and gear leasing companies need to sometimes regain possession when leases expire or credit defaults happen.\nLook for a modest business enterprise equipment financing business that specializes within your industry, 1 that understands your needs and fluctuations within your business and offers financing for specialty truck financing and specialized equipment. This provides a brand new business the possibility to begin up or will give an current business enterprise a possibility to develop and expand, even with terrible credit. Lenders know that these trucks are worth an incredible deal of revenue, and also the truck itself are going to be security adequate for most instances to safe a loan with favorable terms to ensure that it is possible to commence creating great cash. The resources accessible for locating a applied concession trailer for sale on line are your very best source for finding the minimum price tag.", "label": "No"}
+{"text": "A system, method and computer program product are provided for scanning data\nmultiple scanning engines. Initially, a request for data to be scanned for viruses\nis generated utilizing a scanning interface. Thereafter, such request to scan data\nis sent to a plurality of scanning engines utilizing an engine interface application\ncontrol module coupled between the scanning interface and the scanning engines.\nThe request is adapted for prompting the scanning engines to scan the data and\nrespond with events upon locating a virus. Such events are then received utilizing\nan event processor module coupled to the scanning engines and the engine interface\napplication control module for processing the events. The processed events are\nthen sent to the engine interface application control module for being monitored\nby the scanning interface.", "label": "No"}
+{"text": "Clothes retailer New Look warns of higher prices next year\nNew Look has joined the growing chorus of fashion retailers to warn of higher prices next year due to the rising cost of cotton and the increase in VAT.\nThe company said the doubling in cotton prices as well as freight costs and higher wage demands in China and Bangladesh have resulted in a 7 per cent - 8 per cent jump in its costs over the past year.\nIt aims to absorb some of the cost hikes but did not say how much prices will rise. Retailers Primark and Next have also issued similar warnings recently.\nExpansion drive: The opening of new stores helped New Look to increase its UK market share\nThe news came as New Look reported a 4.5 per cent drop in like-for-like sales at its UK stores in the six months to September 25, compared with a 7.5 per cent increase a year ago.\nChief executive Carl McPhail said he expected like-for-like sales to remain subdued in the following months.\nThe retailer’s share of the UK market rose from 5.7 per cent to 6 per cent in the period following the opening of 16 stores in the previous year.\nGroup sales came in 3.2 per cent higher, boosted by a robust performance from its overseas and online divisions.\nUnderlying operating profits fell by 6 per cent to £73.5million in the half-year period.\nMost watched Money videos\n- Jaguar Land Rover opens UK's biggest state-of-the-art design centre\n- Aston Martin reveals the engine roar of its first SUV\n- Scottish Mortgage: Why we hold Amazon, Tesla and Ferrari\n- Land Rover reveals the Defender is being used in next Bond film\n- Michael Schumacher's son drives Dad's title-winning Ferrari F1 car\n- The all-electric Ford Mustang Mach-E ad starring Idris Elba\n- Bristol Mayor explains the 'logic' of a proposed diesel car ban\n- What does Britain's General Election mean for investors?\n- American Express UK introduces customers to a brand new feature\n- Top interior designer reveals tips to give your home a designer look\n- H&H Classics auctions the classic 1983 Ferrari 308 GTB QV\n- Guy Martin sets new speed world record for a tractor at 135mph", "label": "No"}
+{"text": "1.Product Introduction of the Bolaite air filter 6211460400\nHazard of overdue use: The unit has insufficient exhaust capacity, which affects production; the air filter resistance is too large, the unit energy consumption increases; the actual compression ratio of the unit increases, the main load increases, and the life is shortened; the filter element breaks and causes foreign matter to enter the host, which occurs. The host is locked or even scrapped.\n2.The product structure of the Bolaite air filter 6211460400\n3.OEM Replacement Filters\nWe manufacture air filter and oil filter , air oil separator for air compressor for following brand and more .Replacement for air compressor : Atlas copco, IR, Sullair, Kaeser, Mann Filter, Fusheng, CompAir, ABAC,KOBELCO,Donaldson ,Hitachi, Boge, Quincy,Gardner Denver, etc.\n4.Part number of the Bolaite air filter 6211460400\n6.Cooperative customers photos", "label": "No"}
+{"text": "When choosing an outboard for a smaller boat, smooth and quiet almost supersede power, because that motor is likely just an arm’s length away — which is why the new Evinrude E-TEC G2 115 H.O. won me over from the first turn of the key. Evinrude had invited boating media last month to Charleston, SC, to test this new outboard, which makes its official debut today.\nThe new 1.9-liter, three-cylinder two-stroke motor brings a number of G2 features down from the more-powerful Evinrude G2 V6 models (150- to 300-hp models), including the latest E-TEC direct-injection, two-stroke combustion-chamber shape, digital control and instruments, and available integrated power steering, accomplished by a hydraulic helix that fits neatly into the steering tube. New on this model is a sound-deadening two-piece cowl and a pair of balance gears to tame primary engine vibration, and those features do their job well.\nThe cowl cancels the “tick, tick, tick” sound of the E-TEC injectors that’s a signature of the V6 G2 models, and any secondary vibration is absorbed by the motor mounts. On an 18-foot 8-inch Blazer Bay 1900, the Evinrude 115 H.O. was as unobtrusive as a good fishing partner. The new Evinrude carries 1.9 gallons of two-stroke injector oil in a reservoir below the powerhead, so there’s no need to find space for an oil tank in the transom.\nPower remains a virtue, and the 115 H.O. peaks at about 126 horsepower, competitive with the 2.1-liter Mercury 115 Pro XS and 1.8-liter Yamaha VF115 V-MAX SHO. Evinrude claims a 33 percent advantage in mid-range torque, but the Evinrude weighs about 30 pounds more than the 359-pound Mercury. Weight is not a virtue, especially on bay boats and flats rigs, and may cancel some of that mid-range power bonus. That said, the 115 H.O. popped the Blazer smartly out of the hole.\nThe 1.9-liter Evinrude G2 is also offered at 140 and 150 horsepower, and at the 150 rating the Evinrude is suddenly svelte, 88 pounds lighter than the 2.8-liter Yamaha F150CA. Only the Evinrude G2 150 model is equipped with R.A.V.E. (Rotax Adjustable Valve Exhaust), a two-position exhaust port that broadens the power band. However, the 150 seemed to lack grunt when asked to push a well-loaded 1,950-pound Key West 203DFS dual-console runabout out of the hole; we waited through a lot of bow rise.\nThe Yamaha, the 3.0-liter Mercury 150 FourStroke, and the original 2.7-liter V6 Evinrude E-TEC G2 150 H.O. enjoy a big displacement advantage at 150 horsepower, so the 1.9-liter Evinrude 150 might be best-suited for easy-planing, lightweight hulls.\nThe three Evinrudes also come with a new 4.25-inch gear case and RX3 and RX4 props designed to match the power band. The 115 H.O. and 140 models can be ordered with a tiller, which has digital throttle and shift. All models are offered with a 20- or 25-inch shaft, and there’s a counter-rotating version for the 25-inch models.\nEvinrude developed a conversion kit for cable controls, if you just can’t go digital, and white or charcoal cowls can be dressed up with optional colored side panels. The new Evinrude models reach dealers and boat builders after July 1. Pricing has not been revealed.", "label": "No"}
+{"text": "- Mini Golf: RetroMOD APK (Unlimited Money) v5.8.2\nDEUL Classic Ragdoll Shooter Mod DEUL v1.8 Unlimited Life/FP/Unlocked Features:Unlimited Life/FP/Unlockedaction app/game DEUL v1.8 Unlimited Life/FP/Unlocked APK MOD is published on 1585791944.Download and install DEUL v1.8 Unlimited Life/FP/Unlocked APK file (46.4 MB) .The version for DEUL v1.8 Unlimited Life/FP/Unlocked is 1.8. Over 48 users have download this mod. They rate a 4 of 5 about this Mod. To install DEUL v1.8 Unlimited Life/FP/Unlocked APK file. You android device version should be at least Android 4.1、4.1.11 (JELLY_BEAN) .DEUL v1.8 Unlimited Life/FP/Unlocked APK works very well on 31 users's device. The size about DEUL v1.8 Unlimited Life/FP/Unlocked APK is 46.4 MB.You can download DEUL v1.8 Unlimited Life/FP/Unlocked APK to get unlimited money and win easily\"I don't think veils are usually worn with any but white dresses,\" admitted Anne, \"but that is merely a convention; and I am like Mr. Elliott, Miss Cornelia. I don't see any good reason why you shouldn't have a veil if you want one.\"<p>Back in March you might remember me chatting about a game called Beat Street, Lucky Kat's upcoming fighter. Well, not only has LK put up its first indie dev video, there's also a beta call.</p><p>\nMad Skills Motocross 3 Mod Download Mad Skills Motocross 3 V1.4.6 (MOD, Unlimited Money) 1.4.6 Features:MOD, Unlimited MoneyExperience the awesome thrill of motocross with Mad Skills Motocross 3, an intense side-scrolling racing game! Are you fast enough to compete? Pin the throttle when the gate drops and see if you can defeat other riders on powerful bikes over challenging terrain. This physics-based game is not for the faint of heart.Win enough races and you'll unlock faster, better motorcycles. Climb the racing ladder, earn every bike, and you yourself will become one of the masters.That th' unexperient gave the tempter place,When he most burned in heart-wished luxury,\nWhere want cries some, but where excess begs all.Blocky Castle: Tower Challenge(A large number of gold coins)\nExtreme City GT Racing Stunts Mod Extreme City GT Racing Stunts v1.22 mod Features:Get ready for World's Longest Car JumpAre you ready to beat the world record jump ?? If yes, then what are you waiting for ? Take one level high in the Jet car stunts world. World's longest stunt racer Ramp has been set. Take your air stunt with nitro motor car. Smash the dangerous air race with other GT car racers and beat hot wheels car racers in Extreme City GT Racing Stunts. Using turbo nitro engine, enjoy rapid nitro power. Tap a nitro button to boost stunt car speed, tap to make nitro flames. Play stunt race offline and beat your friends in stunt car simulator. No Wifi-No issue !What is Nitro Car Stunt all about?Reckless Car Stunts 3d is a new challenging stunt racing Game. Become a StuntMan and drive a car through the obstacles and other automobiles. Clear all grand auto jump levels with this challenging car 3d stunt simulation.Pick Nitro powers for history's furiously grand automobile car racing. Pick more nitro powers to maximize your winning chance in turbo car racing. Don't forget to blow nitro flames from GT Nitro stunt car. Tap the nitro button to turn on jet car nitro-mode.Accelerate world's fastest bullet car now! Take off for centuries highest smashing jump over the longest car ramp. Enjoy free fall down, land your jet car nicely on road and make your history now with Extreme City GT Racing Stunts!!Join the world of crazy car stunts, perform risky car stunts to challenge your skills and experience the real turbo car racing.✔ Nitro Mode On/OffIn car stunts 3d, now you can play with/without nitro-mode. Turn off nitro mode in the city but don't forget to turn on at a time of take off.✔ World Longest Car Racer-JumpGet ready for History's longest pro car racer jump. Jump and land accurately. Earn more points and unlock next car stunts 3d levels.✔ Car Still feature in airIn the market, for the first time, Dev added brand new car still feature in air to energise your stunt class.✔ Extra Car Reset / Nitro button.If your stunt car capsized, use car reset button at the time of car overturn. Pick nitro power-ups and tap the nitro button to gain airy speed.✔ Maintain your Nitro Power BarThroughout the car simulator 3d, maintain 3d stunt nitro power. Pick Nitro power-ups more and survive longer at the drag racing evening.Drive and manoeuvre through the treacherous surprising ramp to dominate the levels! Fasten your seatbelt and enjoy loads of stunts! Enjoy the thrill of drifting and landing through spectacular stunt ramps. This is the epic stunt game you have been waiting for many months!And stay tuned for Extreme City GT Racing Stunts second updated release. Stunt game is on - Beat your opponents around stunt tracks and ramps. Experience more crazy stunt jumps, traps and environments to challenge the most seasoned driver.\nA LION, fatigued by the heat of a summer's day, fell fast asleep in his den. A Mouse ran over his mane and ears and woke him from his slumbers. He rose up and shook himself in great wrath, and searched every corner of his den to find the Mouse. A Fox seeing him said: \"A fine Lion you are, to be frightened of a Mouse.\" \"'Tis not the Mouse I fear,\" said the Lion; \"I resent his familiarity and ill-breeding.\"WHEN MAN first saw the Camel, he was so frightened at his vast size that he ran away. After a time, perceiving the meekness and gentleness of the beast's temper, he summoned courage enough to approach him. Soon afterwards, observing that he was an animal altogether deficient in spirit, he assumed such boldness as to put a bridle in his mouth, and to let a child drive him.", "label": "No"}
+{"text": "Microwave glass tray drive motor with \"D\" shaped shaft. 21V AC. 2.5/3 RPM 3W. If you have a square shaft see related parts below.\nStirrer drive motor (Square shaped shaft) If you have a \"D\" shaped shaft see related parts below.\nVentilation fan assembly", "label": "No"}
+{"text": "How to remove a seized blower wheel with motor replacement.\nWell, I hate to say it, but first, we got to begin by tearing it down and getting to the blower wheel. Begin by removing the lint screen and the two screws that are located below it. Most commonly, these screws are a number two Phillips. Next, we're going to go ahead and pop the top, and I can do this by pulling forward and gently lifting, but if necessary, a putty knife will do the trick. Also, be sure to disconnect the door switch that's located right underneath the front right corner.\nWith the top securely propped up, we need to go ahead and remove the 2-5 [inaudible 00:00:46] screws that are securing the front of the dryer to the cabinet. A nut driver typically works best for this, as it can be hard to get power tools in small areas. Once you have both the left and right screws removed, pull the front panel forward and lift it up and off of the cabinet. Next, go ahead and remove the belt and pulley as you see here.\nWith the belt and pulley now released, simply lift the drum with the belt and set it aside. Now that we have the unit turned around, we're going to go ahead and remove the terminal block cover as well as the rear panel. And you can see I'm using power tools and all I'm going to say is if you want to use power tools, be careful and don't strip things out. Next, I'm removing the four screws that are securing the blower housing, and I'll simply pull on the bottom, lift slightly up and pull it away from the back of the unit. It does help to tilt the appliance forward slightly so it doesn't fight you on its way out.\nNow that we have the blower wheel exposed, I'm going to show you four techniques we would use to remove it when it seized to the motor. As you can see, I've locked the blower wheel using a handle to a hammer, and the first technique we're going to do is simply to chisel the blower out. To do this process, you would chisel around the center of the blower wheel until it is completely broken free from the drive shaft of the motor. I typically don't recommend this technique as it can be quite tedious and loud with all the hammering and chiseling. Next, we're going to use a drill, assuming that it's the only tool you have for removal. Right off the bat, you can see that the blower wheel wants to turn with the drill, and this is my fault because I did not have my foot securely on the handle to the hammer, allowing the blower wheel to turn.\nHaving secured the handle back in place and firmly placing my foot on top of it, I will continue to drill small holes just outside the center of the blower wheel. To complete this process, you would drill small holes all the way around the center of the blower and then bring the holes together using the bit, making one universal hole and allowing you to slide the blower out for removal. Although this process is nowhere as noisy as chiseling the blower out, it is a bit time-consuming and takes a bit of practice to work the bit, especially when you're trying to bring the holes together to make one uniform hole. I typically would not recommend this technique unless it's the only option you have for removing the blower wheel.\nThe next technique combines drilling and chiseling together. Once you have holes drilled all the way around the center of the blower, simply use the chisel to chisel between them and bring them together. Although we are chiseling and it is quite loud, this technique is effective and quick at removing the blower wheel.\nLastly, for the quickest and most efficient way of removing the blower wheel, we'll be using a hole saw. And here you can see, I've left the pilot drill bit inside the hole saw, and this is a mistake, and I will show you why. Using our one and one-quarter inch hole saw, I'll begin drilling in the center of the blower wheel and you'll see I will not be able to go down into the center of the blower. This is because there's a metal bushing in there and it's impeding my drill bit from going in. To remedy this issue, we're going to be removing the pilot bit from our hole say, and not all hole saws have this option, but I highly suggest that you buy one with it.\nWith the pilot removed, I'm firmly pressing down on the hammer holding the blower wheel, and I'm going to drill out the center of the blower wheel. I will caution you, the more aggressive your teeth are on your whole saw, the more it's going to want to grab the blower and spin it. During this process, you may have to drive the hole saw in and out a few times as it does like to grab onto the blower, but the end result is, is that this is a much superior and faster way at removing a seized blower.\nAlso, when using power tools, please keep in mind that everything around you is razor sharp and one false move can land you in the doctor's office to get some stitches. Here, you'll see I get through the blower wheel and my hole saw does stick to it a little bit, and that's normal. Just a little bit of tugging on it is enough to break it free. Once the hole saw's been dislodged, the blower itself is free for removal.\nHere, we're going to use a 5/16\" nut driver to remove the rear mounting clip to the motor. The reason I do this is that it's a little less prone to slipping off than a flathead screwdriver would be. As far as removing the front clip, simply push it down and roll it off to the left and it'll come right off. Once you have the clips off, be sure to disconnect any electrical connections. This could be done before you take the clips off, but it's just a little bit easier to roll the motor over as you saw and pull the quick connect right off.\nWith everything disconnected, pull the motor back and up to remove it. With the new motor in hand, install it in the same position as the original. Also, be sure to reconnect all electrical and retaining brackets before operating the machine. Lastly, align the blower to the motor's drive shaft and spin it to the left as it is reverse threaded. There's no need to apply additional torque on the blower as it will tighten itself in normal operation, and please follow these instructions in reverse for reassembly.\nHow to remove a seized blower wheel with motor replacement.", "label": "No"}
+{"text": "This is the Traxxas E-Maxx Pins Axle (2.5x12mm) (4) (4955).\nRemote cotnrol bulldozer construction vehicle replica with functional front bucket and rear hammer!\nIf you're looking for a serious Airsoft pistol then you need to go with CO2. And what better CO2 Airsoft pistol than the CO2 WG Non-Blowback Revolver Pistol Black Airsoft Gun! With Firepower of 500 FPS this Airsoft pistol isn't for the faint of heart.", "label": "No"}
+{"text": "7 Results for \"engine\"\nFilter by Geo\nFilter by Author\nFilter by Boat Brand\nFilter by Engine Brand\n- (+) View All\nJanuary 17, 2012 - 11:14amBeneteau Flyer GT 49\nthe 11-foot tender from its garage under the cockpit. I inspected the engine room via the cockpit hatch ... of fuel, no water and three people on board. Fuel consumption was calculated by the electronic engine ...\nFebruary 25, 2011 - 12:59pmPrestige 60\nengine gauges set in more hand-stitched leather. Sitting at the lower helm, you can see both after ... cleverly engineered awning extends from the overhang above the cockpit to shade the table, and even the bow ... was specifically designed. The engine room is very large, with headroom for basketball pros and room on each side ...\nDecember 21, 2011 - 12:41pmCruisers Yachts 41 Cantius\n-conditioner compressor kicks on. Furthermore, this genset’s output isn’t so large that its engine won’t be loaded ... — plus a little more. All of these systems are also easily reached for service. In the engine room, I found more than four feet of headroom and access on all sides of both engines. Every wire ...\nAugust 23, 2010 - 2:57pmRiviera 43\n.) The engine room is beneath the cockpit, housing twin 435-horsepower Volvo IPS 600 diesels. Access is gained ... for routine engine checks while underway. On the flying bridge, you’ll find more space to relax. By placing ... .(approx.) Fuel: 476 gal. Water: 122 gal. Holding: 40 gal. Engines Tested: 2 x 435-hp Volvo IPS ...\nJuly 26, 2010 - 10:12amPrincess 50\nof sight is unobscured, running at night from the station is an easy option. The engine controls, bow ... engine load data in the 80- to 90-percent range. The flying bridge helm is to port, and when backing ...\nMarch 23, 2009 - 11:35amBig Fun: Lazzara LSX 92\nof the Lazzara-built custom furniture. Wire runs were being measured, and all equipment, systems, engines ... of customizable crystal-clear viewing screens displays everything from engine parameters and monitoring systems ... takes a bite out of the engineroom space, but all the crucial points of system and engine access ...", "label": "No"}
+{"text": "Discussion in 'MX/SX General' started by PitRacer, Mar 23, 2011.\nJust saw this on CL.....for sale in Medina?\nWas that the bike RacerX gave away in a sweepstakes?\nGrega should have gone there instead!!!!\nis that a factory clutch lever?\nNo I am almost certain this is not a sweepstakes bike. The kawi in the background is also a Tommy hahn bike which is often at apple cabin. I saw the owner at ram jam a few times last year on the kawi 450 that still had hahns pre prints, team graphics, and even the factory hubs we all dream about with hahns stickers on them plus all the other goodies. I talked to the owner, a very nice guy and he told me the story on the bike which I really dont remember much of. I do know in one way or another he has a friendship personal/business related with the team owner or someone along those lines of Hahns team, and at the end of the year he would buy Hahns race bike from him. The bikes are the real deal and from what I was told the only parts that were removed from the kawi were parts not avaliable to the public, everything else remained on the bike.\nTommy's old mechanic works for the guy selling that bike. He is the crew cheif for the Matco/Army topfuel team. Bike was actually Tommy's.\nyup! thats it! If I remember right canidae dog food was a sponsor of his drag team at one time also?\nyumm dog food\nsure ill bite.... i have put just about any free time i have into maintain my 2007 CRF and do what i can to keep it looking like the old MDK team bikes that wey and DV12 used to ride.\nI would sell it and start another project but id be lucky to get 3k for it and its not worth it to me.\nI said all that for this. The guy has one of these hottest, best prepped machines, best parts any money can buy and the bike sits with bent levers and covered in dirt... Ill catch some **** for this but im just saying\nIf any bike get beat, it's a Professional Rider who does the beating on their bikes. I'm sure Hahn can put a beating on a 450 about 100 times what I can do to one... $8500--blahaaahahahhahahahahaha. No.\nBut I'm sure that since he can afford hahn's old bikes, that it doesn't really matter if he cleans em or not since he's buying new bikes yearly or half yearly anyways. Buying a pro's bike is like buying a bomb. Even if you can afford the top of the line replacement parts it requires, buying them as often as the bike is going to need is a stretch for any local.\n@ddmx: bomb is right! Especially for how we \"non-pro's\" ride the bikes. If you're gonna drop 85 bones then atleast drop it on a new bike and put a pipe on it.\nI know Logan #227 bought the kawi from him!!\nive got his old kawi... i defintly didnt pay no 85 for it i gotta damn good deal on it acutally, also a kick ass bike with no time and motor all gone threw n been done n freshened up ...\ni race A class and doing all amauter nationals on it.\nSeparate names with a comma.", "label": "No"}
+{"text": "Bombardier Transportation announced today that it has finalized a major order for rapid transit cars from the Chicago Transit Authority (CTA), a contract valued at $577 million US (457 million euros). On May 10, the CTA Board had selected Bombardier as preferred bidder. The contract is for a base order of 206 rapid transit vehicles and CTA also exercised a first option for 200 additional vehicles for a total of 406 cars. The total number of cars involved could increase to 706 should CTA exercise all available options.\nThe new rapid transit cars will be the first in the CTA fleet to utilize alternating current (AC) propulsion, a technology that permits dynamic braking regeneration, lower energy and maintenance costs, and improved reliability. Bombardier was the first rail car builder to supply AC propulsion technology to transit authorities in the United States and Canada. The new fleet of cars also will be equipped with a special leveling system to ensure that access to the car floor is level with the station platform during boarding.\nThe contract calls for delivery of ten prototype cars 30 months after Notice to Proceed is given by the CTA. The prototypes will undergo nine months of revenue service testing before delivery of production series cars begins.\nThe CTA operates the second largest public transportation system in the United States, covering the city of Chicago and 40 surrounding suburbs. CTA trains provide about 500,000 customer trips each day via seven routes, 222 miles of track and 144 stations.\nIn North America, Bombardier Transportation is the leader in commuter rail, intercity, subway cars, automated rapid transit and automated guideway transit systems. It also maintains two of the largest multi-level commuter rail car fleets in Canada and the United States.\nBombardier Transportation has its global headquarters in Berlin, Germany and operations in over 60 countries. It has an installed base of approximately 97,000 cars and locomotives, primarily in Europe, the world’s largest rail market. The company offers the broadest product portfolio and is recognized as the leader in the global rail sector.\nA world-leading manufacturer of innovative transportation solutions, from regional aircraft and business jets to rail transportation equipment, Bombardier Inc. is a global corporation headquartered in Canada. Its revenues for the fiscal year ended Jan. 31, 2006, were $14.7 billion US and its shares are traded on the Toronto Stock Exchange (BBD). News and information are available at www.bombardier.com.\nUlrich Bieger (Germany, Austria, Switzerland, Benelux, Eastern Europe and Russia)\n+ 49 30 986 07 1135\nHélène V. Gagnon (North America)\n+ 1 450 441 8156\nNeil Harvey (UK, Ireland, Nordic Countries, Australia, New Zealand, other countries)\n+ 44 1332 266470\nJean-Pierre Hulot (France)\n+ 33 1 53 45 84 69\nLuis Ramos (Spain, Portugal, Italy and India)\n+ 35 1 919 693 728", "label": "No"}
+{"text": "Flightsafety - Cessna Pilots Abbreviated Checklist For Airplanes 525-0360 On on 2040-parts.com\nSeaside, California, United States\nThis listing is for a FlightSafety Cessna Pilots' Abbreviated Checklist For Airplanes 525-0360 And On Revision 1. Comes as pictured, in good condition with a little bit of shelf wear. Some pages may have notes written on them.\nPlease email me with any other questions. I can combine shipping and local pickup in Monterey, CA is also available.\nAviation for Sale\n- Jet aiecraft power systems third edition\n- Us civil aircraft volume 3 atc 201 300 by joseph p juptner aero publishers 1966(US $24.99)\n- Cessna service information summary 1974(US $49.95)\n- Cessna cardinal rg 1971 thru 1975 service manual(US $27.95)\n- Pilot's manual instrument flying 3rd ed. trevor thom asa(US $3.95)\n- Pilot's manual private & commercial by trevor thom asa(US $3.95)\nPeugeot 308 RC Z and hybridsThu, 13 Sep 2007\nBy Tim Pollard Motor Shows 13 September 2007 02:36 Peugeot 308 RCZ: the lowdown The Peugeot stand at Frankfurt was a timely reminder just how much the market has fragmented these days. It was packed with 27 cars in rambling hall 8 – five of which were new concept cars, albeit mostly versions of existing production cars. But there was little doubt which was most eye-catching: the 308 coupe concept was an elegant reminder that French design shouldn’t be written off quite yet.\n2012 BMW M5 leaksSun, 03 Apr 2011\nThe 2012 BMW M5 in all its glory As is often the way with new cars, there’s lots of pre-amble until the point where car makers deliver them up at a Motor Show or an appropriate location. The more desirable the car, the bigger the hype and tease tends to be. Which is why the 2012 BMW M5 seems to have been coming forever.\nVolvo C30 Battery Electric Vehicle (BEV) revealedThu, 17 Sep 2009\nThe Volvo C30 BEV Revealed is probably a bit strong as Volvo hasn’t actually rolled out a car for the world to see. But it is a plan – and internal evaluation, apparantly – of an electric Volvo C30. The Volvo C30 BEV is a logical step for Volvo to take for the small C30.", "label": "No"}
+{"text": "Coventry BS: Secrets of its success\nAs Coventry Building Society bucks the trend amongst mortgate lenders with an 8% first half profit, we look at the fundamentals behind its success.\nSafer haven: Coventry Building Society has taken advantage of weaker banking rivals\nBritain's fourth-biggest building society, which has recently come up with some of the widest ranges of mortgage and savings offers in the market, said it had attracted £2.7bn of extra savings in the year since the end of June 2007.\nThat is a staggering 32% increase in its retail savings balance reflecting consumers' flight to safety.\nHere we explain why customers are seeking a safer haven in mutual societies.\nI thought it was all doom and gloom for the banks, but Coventry Building Society seemed to have posted sparkling results. How come?\nBritain's fourth-largest building society is clearly making hay while the sun shines on the mutuals but it pours on the banks. It profits rose 8% in the first half of this year.\nWhere did that come from?\nA staggering 24% rise in net mortgage lending coupled with a 9% increase in savings as people still veered away from the smaller banks (most of them, of course, former building societies) in the wake of the collapse of Northern Rock.\nCan it be sustained?\nCoventry has been nimble. It still does buy-to-let mortgages, but only up to 65% of a property's value, and offers some extraordinarily good deals on ordinary mortgages for people who only want to borrow 50% of their home's value. Similarly, its savings rates are among the best.\nIs it the same for all building societies?\nTo an extent, yes. Mutuality ensured that most of them broadly based their funding models on only lending what they have taken from savers. They haven't gone the fancy wholesale market routes taken by the banks, and if they did only to a very limited success.\nWasn't it Coventry that came up with the motto 'TLC not PLC?'\nYes, but this week's one is better: 'No exposure to US subprime assets, no CDO or SIV investments.'\nMost watched Money videos\n- Bentley brings the comfort of a limo to their popular SUV\n- McMurtry fan car sets new Goodwood Hill record as fastest car\n- Ford unveils electric version of Britain's best-selling vehicle\n- 1990's advert for the Vauxhall Cavalier Turbo 4x4\n- Watch the BANNED Land Rover ad that 'misrepresented' parking sensors\n- A rare 1955 Mercedes 300 SLR Coupe being driven at Goodwood\n- Renault previews new family car powered by a hydrogen-electric system\n- German car giant BMW launches its first ever M3 Touring model\n- Ford unveils 2,000bhp electric Supervan its fastest transit yet\n- One-of-a-kind Ford Capri sells for new record price of £75k\n- Land Rover unveils its new £80,000 Range Rover Sport\n- RM Sotheby's has sold a Mercedes for a record £115million", "label": "No"}
+{"text": "Best Bike Tire Pump With Gauge\nThis is a fast and easy to use gauge that enables you to reach the desired pressure 30 faster than other products.\nBest bike tire pump with gauge. For this 2020 update we chose a new best mini pump the lezyne micro floor drive which has the same the abs flip chuck as the floor pump model. Should you get a flat tire while riding you will want to have a mini pump. Choosing the best mountain bike pump is important so you can always easily add more air to your tires whether that is before or during a ride. An affordable bike pump that has all the bells and whistles you need and nothing you don t best budget floor pump.\nTopeak joe blow floor pump at amazon. Best floor bike pumps 1 topeak sport floor pump 2 crank brothers gem bicycle floor pump 3. Built in tire pressure gauge a handy feature on some advanced bike pumps is the built in tire pressure gauge. A separate low pressure gauge would be nice.\nBirzman velocity with gauge mini bike pump review we rated this pump nine out of ten. Larger bike pumps such as floor pumps will give you the best performance for these unique bike tires. The last thing you need when working up a sweat pumping up your bike tire is a little crappy gauge that you can t read or worse no gauge at all. If you ride often and want to add air to low tires and perform tire changes while out cycling a mini bike pump is also a wise accessory.\nAll the bike pumps in this test lack precision if you only have tubeless mountain bike tires. It took us 200 strokes to reach 90psi and we liked the fact it had a solid metal feel and rubber. You should check your tire pressure before each ride and make sure that it matches the trail and weather conditions. For the floor pumps we counted how many strokes it took to get to 20 psi in a mid width 29 inch mountain bike tire as well as 80 pounds in a 700 x 28mm tire.\nThe better gauges are of decent size easily readable and a good color combination. Because of the low pressures used in these tires often the first pressure readings on the gauges are where these tires are ridden. Schwinn 5 in 1 at amazon can push up to 140 psi of air into your tires and comes with a wide gauge to ensure your tires are inflated to the correct pressure best for tubeless tires. We read through tons and tons of amazon reviews to find the very best and most efficient bike pumps you can buy including performance bike floor pump with gauge glueless puncture kit and eyezoff.\n- How Big Is A 26 Inch Bike\n- How Do Bicycle Races Work\n- How Do Bikes Get Stolen\n- How Do A Bikes Work\n- How Do Bicycle Reflectors Work\n- How Buy A Bike\n- How Do Bicycle Wheels Have Spokes\n- How Do Boris Bikes Work\n- How Can I Buy A Bike On Emi\n- How Clean Bike Chain\n- How Blue Bike\n- How Do A Bicycle Kick\n- How Do A Bicycle Crunch\n- How Big Is A 26 Bike Frame\n- How Big Is A 24 Inch Mountain Bike\n- How Big Is A Bike Wheel\n- How Are Bike Wheel Sizes Measured\n- How Do Bikes Freewheel\n- How Do Bikes Stay Balanced\n- How Do Blue Bikes Work", "label": "No"}
+{"text": "Are you looking for a great deal on a pontoon boat this summer look no further. This pontoon was in our rental fleet and is ready to be sold comes with full factory warranty. There may be a scratch here and there but nothing major. There are other 22 Ft pontoons available as well. If you are looking to save $3-$5,000 here is your chance.I attached some pictures of some of the pontoon Boats that...\nStop by Skipper Buds - Lake Geneva this weekend for your last chance to save BIG on our 2018 models. Bring in your current late model boat for a trade-in and receive additional exclusive incentives. September 13-16CALL NOW TO MAKE AN APPOINTMENTSkipper Buds - Lake GenevaW6799 Brick Church RoadWalworth, WI 53184262-581-4252\nTHE KAWASAKI DIFFERENCE THIS SMOOTH WATER SPECIALIST HAS A POWERFUL ENGINE AND AN AGILE COMPOSITE HULL THAT DELIVERS SPORTY HANDLING FOR AN EXHILARATING RIDE. 1,498 cc, inline four cyl marine engine delivers thrilling response and powerful acceleration Hull design is responsive for all skill levels The large rear deck offers plenty of room to board the vehicle Kawasaki Smart Steering system ass...\nNice looking and running Searay boat. Ready to use. Have Title for trailer and boat.\nMy buddies and I have a couple Trailers available. When you contact me please specify your budget and what Yearmakemodel machine you intend to use the trailer for. Makes things easier to figure out what trailer will work for you.Couple Jetski trailers also flatbed Snowmobile ATV trailers and a small boat trailer and a 16-19 foot boat trailer too. Single Place Jetski Waverunner Small Boat traile...\ngreat boat,, newer upholstery. has cuddy cabin, newer trailer in great shape,, boat has cracked block , due to not being winterized in time, do have a 4.3 same year available to go with\n1983 15ft Smoker Craft deep V with 40hp Mariner and 50 fp trolling motor.Trolling motor has nice foot controls. Boat and motor are in great shape. Asking $2500 OBO. Many new parts including wheel bearings, tires, safety harness and key. Plugs and aerator sprayer for livewellNew spare tire and hitch lock, and new summer cover. Good 6 gal fuel tank with new hose and fittings. All lights are worki...\n2000 Godfrey Sweetwater pontoon. 22 with 2002 50 hp MERCURY EFI. Motor was flushed last year for scale build up. Two battery system in switch so youll never be dead in the water After market alpine speaker system with LED lighting. Seats are in great shape for their age Comes with full cover and poles. Also, life jackets, throwable, ladder, ropes and anchor all included Very nice boat for the p...\n1992 175 Euroline Waterways open bow with new power head 70 hp Mercury outboard with tilt and trim. Beautiful interior.\n2000 Lowe 15 ft. Sea Nymph fishing boat with 25 hp. Johnson motor, trailer, Minn Kota bowmount trolling motor. Excellent condition, low hours. Located at Candlewick Lake, Poplar Grove, IL. Call or text Tom at for further details. Asking price $3,500.00.\n22ft Jet boat Mercury powered v6 240 hpGood condition, Runs as it should.No IssuesTitle for boat, Trailer Wisconsin no TitlePlease email me with any questions.\nSelling a 2003 tdb 14 ft duck boat with a 1995 25 hp Mercury with central controls The boat is in great condition and runs well with a hustler single axle trailer. Asking $6800 obo call with questions\nMERCURY 200 OPTIMAX, MINNKOTA 101, LOWRANCE 520 INDASH, 1197 HUMMINBIRD AT CONSOLE, HUMMINBIRD 999 AT BOW, HYDROWAVE, JACKPLATE, TROPHY PROP, 3 TROLLING MOTOR BATTERIES 1 YEARS OLD, NEW STARTING BATTERY, MINNKOTA PM460 CHARGER AND MINNKOTA CHARGE ON THE FLY CHARGER, BOAT IS IN VERY GOOD CONDITION RUNS AWSOME, 68-70MPH, VERY DEPENDABLE, ONLY SELLING TO BUY NEW BOAT.....$19000 OR BEST....JIM....\n16 foot 1973 Smokercraft boat. Has a 28 horsepower Mariner outboard motor with a long shaft. New water pump last year on the motor. Can seat up to 5 people. Trolling motor, trailer, and spare tire included. New wiring on all. Electric start on the motor. Prop is in good shape. Trolling motor was new in 2016. No leaks, have only ran in a Wisconsin lake for the last 6 years. Have title.\nhave a nice bayliner capri 22ft tandem axl, redone carpeting and most of the upolstery, does need a outdrive and motor put back in which can be done here at my shop call pete\n16 ft Sylvan Backtroller boat with trailer. Brand new Mercury 25 HP 4 Stroke no electric starttill. This boat was completely gutted out reinsulated, marine plywood, new carpet, new nav lights and 68 gang rocker switch panel. Trailer has new tires and hub assemblies, comes with spare. Bilge pump and live well work. All ready for some late summer fall fishing\n92 Yamaha jet ski. ABSOLUTELY nothing wrong with this machine comes with the black trailer. This is WI no title for trailer have the registration for the ski good til 2021. Call me 8one5 505 3375. Thanks Christin\nSelling my boat.1990 Bayline cobra 1997 115HP MercuryNew Motorguide Xi5 trolling motor with spot lock, remote control amd wireless footpedal.Comes with Humminbird Helix 5 chirp and side imaging. Everything works. Has newer tires on trailer. New seats and carpet and flooring is in great shapeClean title for boat and trailer and the boat is registered through 2020. New LED lights on the trailer. ...\nNo title no motor call eight one five 441 six zero one five", "label": "No"}
+{"text": "Since 09 Oct Stable base and flexible boom: We want to fix it and make it right. OmniVision Microphone Drivers 4 models. Product is new and has not been used.\n|Date Added:||11 September 2004|\n|File Size:||65.76 Mb|\n|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|\n|Price:||Free* [*Free Regsitration Required]|\nCompact and Lightweight Design. Memorex Microphone Drivers 6 models.\nDynex Microphone Manuals\nWe want to fix it and make it right. Share your thoughts with others.\nShow only see all. Windows XP, Vista, 7, 8, 10 Downloads: You may also be interested in usb microphone.\nThis page contains information about installing the latest Dynex Microphone driver downloads using the Dynex Driver Update Tool.\nFurthermore, installing the wrong Dynex drivers can make these problems even worse. Age 3 and above. Dynexx is a lifelong computer geek and loves everything related to computers, software, and new technology. Back of packing is partially ripped opened but item is totally new.\nDynex – USB Microphone – DX-USBMIC (end 12/27/ AM)\nManhattan Microphone Drivers 3 models. This tool will download and update the correct Dynex Microphone driver versions automatically, protecting you against installing the wrong Microphone drivers. You May Also Like.\nIf buyer recieved brocken item need to inform mkcrophone hours, send picture item and packaging Our policy lasts 7 days. Guaranteed 3 day delivery. Shipping We allow combined shipping. Stable mifrophone and flexible boom: Coby Microphone Drivers 7 models. If we are unable to meet the dyynex delivery date we shall not be liable for any losses, liabilities, costs, damages, charges or expenses arising out of late delivery.\nGuaranteed Delivery see all. Guaranteed by Mon, Jan 7. Within 2 miles 5 miles 10 miles 15 miles 20 miles 50 miles 75 miles miles miles miles miles miles miles miles miles of. To be eligible for a return, your item must be unused and in the same condition that you received it. OmniVision Microphone Drivers 4 models. Genius Microphone Drivers 1 models. Looks to be the DX MI, since there are no other markings on it. There seems to be a problem serving the request at this time.\nI used once for a class assignment, like new. Guaranteed by Mon, Jan 7.\nPlease provide a valid price range. Within Malaysia ,Ship By: Age 3 and above Delivery Times We will send out all the orders the next working days micrpohone payment received. Within 2 miles 5 miles 10 miles 15 miles 20 miles 50 miles 75 miles miles miles miles miles miles miles miles miles of. Please provide a valid price range.", "label": "No"}
+{"text": "UniCarriers honours dealers\nThursday, 30 May 2019\nMarengo, IL, United States\nWes Hibdon accepts his award\nUniCarriers Americas Corporation (UCA) has celebrated its top dealers during its annual Pack for the Sun sales trip. Forty-five dealer professionals and their guests travelled to Sandals Grande Resort in St. John's, Antigua, where they were recognised for top sales performance during fiscal year 2018.\nPack for the Sun winners were chosen based on the number of new units and aftermarket parts sold. To qualify for the trip, UCA sales representatives were entered into three established contest groups determined by their dealership's market size, and the top professionals in each category were rewarded the trip.\nThe Pinnacle award was presented to Wes Hibdon from Darr Equipment who was honoured as the most successful sales professional in UCA's dealer network last year.\n\"The ambition and business performance among this group of dealers is something I'm not only proud of, but incredibly grateful for,\" says Brian Markison, senior director of sales and marketing for UniCarriers Americas. \"Our success rides heavily on the hard work of our dealer network, and this trip always delivers in acknowledging their dedication to the UCA brand.\"", "label": "No"}
+{"text": "Branden McNew is transitioning from a 29 to a 27.5. As a result, he has tires and wheels for sale, and the price is right.\nThe package includes two new Kenda tires and a set of High Roller 2’s (3c, Maxx Terra, tubeless ready, exo), size 29 x 2.3. Ridden once on trail and once on gravel.\nHe is throwing in three tubes. Tubes and four tires for just $65.\nHe is also selling a set of what he calls “cheap 29er wheels.” Best offer on those.\nContact Branden for details or to make an offer at bmcnew5L7@gmail.com", "label": "No"}
+{"text": "16 Feb 2017\nSince I just had this issue and found nothing on the forums I am posting this very quick article.\nIf you encounter this error while doing auto instrumentation:\nMultidex preprocessing failed\nThe following properties should help.\nFor versions < 6.2:\nFor versions >= 6.2\nNOTE: Adjust the value of X according to the log messages you receive during the auto instrumentation process.\nYou will probably need to run the command line auto instrumentation process to get the detailed messaged needed to tweak these settings.", "label": "No"}
+{"text": "KeyFit and KeyFit 30 models. The RumbleSeat converts a single stroller to a double in-line stroller in seconds.\nThe 2014 UPPAbaby RumbleSeat is designed exclusively for the VISTA stroller.\nUppababy vista chicco® infant car seat adapter (2014 and earlier). Use our Car Seat Compatibly Guide to find out what adapter you need based on your infant car seat and stroller. Up to 3 cash back The UPPAbaby Adapter allows you to fit Chicco Infant car seats to the frame of your stroller. Sign up for news updates – opens a new page – opens page on an external site – opens page on an external site – opens page on an external site – opens page on an external site – opens page on an external site.\nUPPAbaby Vista Graco Car Seat Adapter 2014 And Earlier Vista Models. New Listing UPPAbaby Infant Car Seat Adapter for Chicco. Primo Viaggio 435 Car Seat Adapter for UPPAbaby strollers.\nSingle Car Seat Adapter – GracoChicco. This convenient adapter will take you and your baby straight from the car to the road. We now carry the NUNA PIPA adapter for Uppababy.\nClothing 307 Cycling 240 Footwear 234 Baby Kids 185 SnowSports 172 Automobile. New Other 50 out of 5 stars. Uppababy Vista Stroller with Mesa car seat.\nLower Infant Car Seat Adapter for Maxi-Cosi Nuna and Cybex. The adapter is not sold by retailers can be purchased directly from UPPAbaby. Click here to view available adapters.\nWas bought 2016 model 2014. These convenient infant car seat adapters will take your little one from the car to the road in one click. Virtual Car Seat Check – opens page on an external site.\nIf you have an UPPAbaby VISTA from 2014-earlier your stroller is compatible with the UPPAbaby MESA car seat using an adapter. UPPAbaby adapters allow you to fit Chicco infant car seats to the frame of your stroller. Roll with 1 2 or 3.\nUPPAbaby has discontinued 2014-earlier car seat adapters for other car seat models so these adapters can likely be found only on the used market. 11 product ratings – UPPAbaby infant car seat adapter for Maxi-Cosi for use with Vista Cruz 2015 C 3255. NOT COMPATIBLE WITH Maxi-Cosi Prezi.\nCompatible with all Chicco KeyFit and Chicco KeyFit 30 models Easy snap-in snap-out installation. Infant Car Seat Adapter for Chicco. Select infant car seat models of Maxi-Cosi Nuna Cybex and Chicco can be used with the CRUZ.\nUPPAbaby Infant Car Seat Adapter for Chicco 380 3 offers from 3999 UPPAbaby VISTA Upper Adapters for VISTA 2015-later. We create adapters for the following infant car seat manufacturers and models. The VISTA allows for two infant car seats two Bassinets two seats or a combination offering plenty of positions to go and grow with your family.\nCompatible with all Chicco KeyFit and Chicco KeyFit 30 models Easy snap-in snap-out installation. Stroller incl Frame seat bassinet car seat base adapter musquito cover. Mico Mico AP Mico NXT Mico Max 30 Citi Cabrio and CabrioFix.\nUppababy 2014 earlier vista maxi cosi adapter Filters. This convenient adapter will take you and your baby straight from the car to the road. Shop Infant Car Seat Adapters and make a.\nCar seat exp 2024 All clean after professional cleaning Fabrics looks like new. The UPPAbaby VISTA from 2014-earlier is compatible with any model year of the UPPAbaby MESA infant car seat using adapters that can be purchased only from UPPAbaby. Be in the know.\nOther car seat adapters for the 2014-earlier VISTA are sold out and have been discontinued by UPPAbaby. Uppababy Mesa car seat. Virtual Tune-UP Gear-UP – opens page on an external site.\nWhether its a quick stroll to the supermarket or a long leisurely walk through the park this exclusive seat provides maximum comfort and style for parents precious cargo. The VISTA is compatible with the UPPAbaby MESA infant car seat without the need for adapters. Shop Uppababy 2014 Earlier Vista Chicco Adapter.\nLower Infant Car Seat Adapter for Maxi-Cosi Nuna and Cybex.", "label": "No"}
+{"text": "The first car on the subway when riding very late at night. This car is usually filled with hobos, winos, bums and an assortment of riff raff, who flop around and stink up the joint.\nBro1: \"Here's the train, let's get on the first car, so we're close to the exit when we get off\"\nTrain: \"Toooot, chugga chugga chugga, screeeeeeee pishhhh\"\nBro2: \"No way bro, it's late at night, I don't want to ride in Hooverville, lets take a middle car, where the biddies at.\"", "label": "No"}
+{"text": "Tang Bihu: Where is the fundamental logic wrong with the thunderstorm in the eggshell apartment?,srx fuck\nThe notebook finally reached the last bat, Cristiano’s hands. He looked at it from the things he liked to eat, to the running position, weakness, the performance of the promotion class, the performance of the Barcelona, ??the performance of the Atletico, and the analysis. Like small papers, they are arranged very orderly, and it feels like a robot organizes them. srx fuck The car he is sitting in is not an F1 car, and his car is only a sports car, not a racing car.", "label": "No"}
+{"text": "Does this top burner receptacle replacement work on my model? It says that it is incompatible but I can't find anything that is. Thanks.\nAnswer Hello Joe,\nThe compatibility tool is still in work and is not recognizing the part and model numbers properly. This should be disregarded and we apologize for the inconvenience. The part you were viewing 330031 is the correct one for the model number you listed.\nThe top burner receptacle - AP3075808 - says it is not compatible with my appliance. It looks the same from what I can tell. Do you have a different part that is compliant with my burners? RF385PXEW0.\nAnswer Hello Joe! The top burner receptacle kit, part number 330031, will work on your model. The original kit listed for your model is part number 814399. They are similar kits, just with different brackets. You can use either on your appliance. Thanks!\nI need to replace the cooktop on my stove. Is this a difficult repair?\nAnswer Hello Lisa. Some models are not to hard to replace and others can be difficult. Without the model number, we can not tell if yours is the hard one or not.\nI have the slide-out range and need to replace the top burner with receptacle kit part # 330031. How do I get the top off to splice into the wires to put the receptacle kit in? What is the best way to get to the wires?\nAnswer Hello Mike. Make sure power is off. Remove the element and drip pan. Then remove the screw for the receptacle and pull it out the large hole and splice the wires and replace the part. There is no need to raise the top to replace this part.\nI have a slide-in model range. I need to replace the top burner receptacle kit part # 330031. How do I raise the top up to get to the wires? I watched the video and it showed splicing into the existing wires and putting on shrink wrap on a range that the top lifted up. How do I get to these wires to do that on my range?\nAnswer Hello Mike,\nOn a cook top, the unit has to be pulled out of the countertop to access the screws around the perimeter of the unit that hold the top onto the body. The wiring doesn't have to be disconnected but it will have to sit diagonally over the hole in the countertop. When you lift the unit straight up, you should have a helper to lay towels at each end so when you turn it a bit to set it down, it will not damage the countertop. Now you can remove the screws, (usually three in each end and four across the front and rear), to access the inside.", "label": "No"}
+{"text": "GOOD® Automatic Windlass, Inc. was originally founded in Philadelphia, Pennsylvania in the 1950’s. A family operated machine shop and manufacturing facility engaged in many diversified fields.\nIn January of 1971 the company relocated to Barnegat, New Jersey. The focus of the company was to provide an automatic anchoring system for the pleasure boating industry. Prior to this time, automatic anchor windlasses were not a commonly supplied item to this industry as they are today. The company recognized this and introduced a completely new automatic free-drop rope anchor windlass that revolutionized the anchoring methods for the pleasure boater. GOOD® Automatic Windlass, Inc. held all the original patents on the automatic free-drop anchor windlass and continues to manufacture a complete line of free-drop rope and rope/chain combination anchor windlasses for the pleasure boat industry.\nAfter 50 years of manufacturing experience, GOOD® Automatic Windlass, Inc. strives to satisfy its’ customers and will continue to be an innovator in the development of anchor windlasses for boaters for years to come.", "label": "No"}
+{"text": "- Bicycles & Assessories\n- Parts & Service\n- Open M-F 8-5, Sat 10-6\nWe're open and serving our customers at the front door. Workshop booking essential.\nServing at front door. Wkshop booking essential.\nShimano M600 (for LX / Deore / Alivio V-brake) one-piece brake blocks\nAdd to cart\nM600 (for LX / Deore / Alivio V-brake) one-piece brake blocks\n- Pair of one-piece brake blocks for use with Deore LX, Deore and Alivio M600 V-brakes\n- M-System compatible\n- Calibrated post for easy set-up\n- Exactly the same specification as originally supplied, ensuring consistent performance", "label": "No"}
+{"text": "Carter Ford fresh leaked content is available for free. Get yours today instead of paying 5.99$ monthly to OnlyFans. Carter Ford OnlyFans leaks has 14345 views in last 12 hours.\nCarter Ford OnlyFans Leaks unlocked\nTo get Carter Ford leaked 637 photos and 1363 videos for free you need to click on the button below and verify that you are not a robot. It's easy and simple procees that not take longer then 30 sec and you will get Carter Ford OnlyFans leaked photos and videos.\nUsers search for:\n- Carter Ford hacked onlyfans\n- Carterfordxxx photos\n- Carterfordxxx videos\n- Carterfordxxx onlyfans leaks\n- Carter Ford\n- Leaked photos of Carterfordxxx\n- Download Carter Ford onlyfans leaks\n- Carter Ford onlyfans leaked\n- Leaked Carter Ford\n- Leak of Carter Ford", "label": "No"}
+{"text": "|Material: CARBON||Depth: 25mm|\n|Weight (Set): 1,753g||Width: 40mm Outer, 35mm Inner|\nWide and laterally stiff, our X1-PLUS wheels will have you owning the trails the day you place the winged wheels on your bike. Designed for All Mountain, the hookless designed clincher rim is deep enough to give you the stiffness needed to finally make the switchback you were never able to get around.\nWe build them around the Mercury designed 6-bolt hubs and Sapim RACE spokes.\nA 28 spoke, two-cross lacing pattern makes for a laterally stiff wheel with just enough pliancy to give a calmer and more sure-footed ride through the rough stuff.\nWARRANTY: 2 yr warranty extends from the date of purchase, applies only to the original owner, and is not transferable.WARRANTY INFO\n|Material: CARBON||Depth: 50mm|\n|Weight (Set): 1,605g||Width: 24mm|\nThe M5's have seen countless podium finishes on varying courses. They are light enough to handle the steepest of climbs yet provide you with a nice braking performance due to the newly developed brake track. They are deep enough to provide you with an “unfair” aerodynamic advantage on the flats. Bottom line, the M5’s will bring you to the line alone. It is up to you to decide how to celebrate the win.\nThe M5s' construction is informed by the Dual Carbon Layer Process, or DLP. Mercury blends high- and mid-moduli carbon fibers to straddle the best balance between the lightweight and stiffness of the former and the fatigue-resistance and durability of the latter. DLP also involves the incorporation of basalt fibers in the brake track to reduce heat build-up and increase stopping power. While reduced heat is mostly applicable to tubular wheels, the increased stopping power goes a long way toward addressing the poor braking that is one of the most common critiques of carbon wheels.\nThe M5 is a solid 24mm wide, which means you can run lower PSI for a more comfortable ride that corners with unparalleled confidence. Wider rims also have some counter-intuitive effects when compared to those standard 19 millimeter rims: they actually decrease rolling resistance and increase aerodynamics.View full product details\n|Material: CARBON||Depth: 36mm|\n|Weight (Set): 1,485g||Width: 24/18mm|\nThe M3c is our lightest, most responsive clincher road wheelset on offer. Coming in at 1,485 grams for the set, they are your express ticket to the top of the pass and the front of the peloton.\nThe updated profile of the rim is a razors-edge balance of aerodynamic capability, and the strength and rigidity that out-of-saddle grinds to the top demand. The rim measures 36mm deep, and 24mm wide to accommodate a wide array of tire choices. With the internal width of 20mm, including a 2mm bead socket, a 25mm tire makes an ideal shape and larger tires can expand to their full volume with less pressure, further decreasing rolling resistance and improving traction and handling.\nAs always, our M series are built with bladed Sapim spokes and alloy nipples.\nView full product details\n|Material: CARBON||Depth: 30mm|\n|Weight (Set): 1,500g||Width: 30mm Outer, 24mm Inner|\nBrand new to the Mercury line, the G1 carbon gravel specific wheel is Tough enough for any road your adventure ride might throw at you. Plenty wide to accommodate a wider tire for a stable platform, these rims are built to withstand the roughest of roads, built around our MTB hubs and are rounded out with Sapim double butted spokes.\nYou will LOVE the durability of these wheels when things get rowdy.\nMinimum tire width recommendation: 35mmView full product details", "label": "No"}
+{"text": "Even though Max Carter and Nathan Reed start off going getting their ride clean at car wash, things definitely get pretty dirty! As the suds wet the car on the outside, Nathan wets Carter’s cock inside. The ride at the wash comes to an end, but the ride for the boys is just beginning. Back at Nathan’s, Max returns the favor waxing the kids knob and giving the carwash a run for it’s money.\nYou are here: / / Max Carter and Nathan Reed “Blonde, Bold, and Bare”", "label": "No"}
+{"text": "Compare Ryder truck moving to U-Pack\nMoving with a Ryder truck? Keep in mind that there might be other options to consider that you haven't thought of yet. U-Pack offers a service that's comparable to truck rental, but with some extra benefits that will make your move much easier.\nSo what are the differences between a Ryder truck and U-Pack moving trailers? Here's a look at what you'll get with each service.", "label": "No"}
+{"text": "SCICON 29ER MOUNTAIN BIKE WHEEL BAG\nIf you are looking to transport your MTB wheels for your next adventure, we have you covered.\nThe Scicon 29er Mountain Bike Wheel Bag is designed to fit one wheel up to the size of a 29er wheel (29 inches) and is great for transporting dirty wheels after a day out on the trails.\nDialed in for 26”, 27.5”, 29” front or rear wheels.Featuring an exterior rigid axle protection and strong carry handles, the bag is constructed out of heavy-duty Nylon material made to last.\nThe bag protects your wheel against unforeseen scratches and tears at an extremely low weight (0,8kg/1,7lbs only).\nKeep your car and home free of dirt. An ideal piece of kit when racing, training or exploring. Get yours now.\nThere are no reviews yet.", "label": "No"}
+{"text": "Skip to content\nWelcome to Supplier of oil expeller website!\nOil Extraction Machine\nOil Press Machine\nOil Production Line\nOil Refining Machine\nTag Archives: Coconut Oil Machinery\nPosts tagged \"Coconut Oil Machinery\"\nfactory promotion price coconut oil press detail and price\ndl-zyj10 hot sale automatic coconut oil extractor\ncooking coconut oil machine china (mainland) oil pressers\nCopyright © 2021 vegetable oil cold press machine manufacture cheap price |", "label": "No"}
+{"text": "Limbsaver String Decelerator Universal Mount Black\n7 in stock\nuniversal mount black\nPrimary Color: Black\n- Universal mounting system\n- Re-designed to eliminate string noise\nBuilt with a re-designed node that slows the string to a stop to reduce slapping noise. Universal mounting system fits most bows and mounts to either the front or rear stabilizer bushing.\nThere are no reviews yet.", "label": "No"}
+{"text": "In a boost to the Northern Powerhouse and UK manufacturing, and as part of its ongoing commitment to serve its customers in the long term, ...\nBy Evan Quasney, Global Supply Chain Lead, Anaplan28/10/2019\nBy Hilary Rundle, Director at Bis Henderson Recruitment17/10/2019\nThe countdown is now on for the first reporting deadline for the mandatory Streamlined Energy and Carbon Reporting (SECR) scheme, and some manufacturers will already be over 6 months into their first SECR reporting ...11/10/2019\nManufacturing is adapting to industry 4.0, a concept in which factories of machines are augmented with wireless connectivity and sensors and connected to a system that can visualise the entire production line, control, ...11/10/2019\nA Coventry-based autonomous vehicle specialist is kick-starting a ‘world first’ trial showcasing ......07/03/2019\nA campaign to transform the way young people see engineering and boost numbers entering the profession has launched.16/01/2018", "label": "No"}
+{"text": "- Massive clearout-Hope, Easton, Boardman, Crank Bros, 26er tyres all in vgc\nBig clearout. Prices include p&p. Paypal gift or bank transfer-Paypal full fat if buyer pays fees. Postage discount for multiple items. Based in Edinburgh. Ta!\nShimano SLX Cranks 22/32/44 170mm HT2. 150 miles use, very light marks but VGC. £65\nHope Pro2 Pro2 EVO front 15mm adaptors £10\nEaston EC70 seatpost 400mm 30.9 diameter. Marking from insertion and crudguard mount. 150 miles use. £40\nBoardman Pro hardtail 26er frame size large / 19″. VGC, few paint chips, comes with Hope headset and seat collar. Superb frame. £75\nPair of Hope XC Sport 6 bolt 32h QR hubs on 26er Mavic X317 and X717 rims. Run true, back rim worn from brake pads and one knock in the rim. Rear hub bearings replaced in last month. Slight mark to one of the rotor mounts but no cracks or bad things! £75\nPair Continental X King 26×2.2 and Mountain King 26×2.2 protection folding tyres still with mouldings on tread £25\nPair Specialized S-Works 2Bliss Storm Control 26×2.0 tyres vgc £20\nCrank Bros Colbalt 2 (the fancy ones) wide flat bar. Used once and went back to risers. £25\nEmail in profile.\nTaPosted 4 years ago\nThe topic ‘Massive clearout-Hope, Easton, Boardman, Crank Bros, 26er tyres all in vgc’ is closed to new replies.", "label": "No"}
+{"text": "Homeowners everywhere are preparing for the upcoming winter season, and that means many people are putting their Honda snowblower through the maintenance steps that come before each season of snow, ice, and sidewalk clearing. Amid all of this maintenance, though, one key area often gets overlooked: safety.\nSnowblower operators often assume that they know how to best use their equipment, often without reading the safety instructions paired with the snowblower as part of Honda’s comprehensive product manual. These safety steps are important, however, snowblower operators should be mindful of these things before they head out for their first snow clearing job of the year.\nBe Mindful of Slopes and a Loss of Traction\nSnowblowers work best when they’re used on a flat surface, largely because it allows them to move forward more easily. The operator of the snowblower is also able to maintain far better traction in slippery conditions when a slope is not involved, thus greatly increasing their overall safety during operation. Generally speaking, steep slopes and inclines should be avoided while using a snowblower. Instead, operators should choose to use traditional shovels or brooms to clear areas that are on a steep incline.\nMore gradual slopes can be cleared using Honda’s snowblower models. Operators should make sure they’re wearing the right shoes or boots to maintain good traction. Also, it’s important that the snowblower is steady and not encountering any problems with the task.\nPoint the Snowblower’s Output Chute Away from Key Objects\nSnowblowers spit snow out at a high rate of speed, and they’ll do the same thing to debris found in lawns and on sidewalks. This can cause serious injury to anyone passing by, and it can seriously damage vehicles, walls, and windows, upon impact. To avoid these accidents, be sure to point the snowblower’s output chute away from people and objects that could otherwise experience serious problems if debris becomes airborne.\nFurthermore, never remove the guards and guides that surround the intake or output areas of the snowblower. They’re designed to keep debris away from the intake and, should it pass through the snowblower, the installed guards are designed to keep it away from the operator and any close bystanders. Operators should err on the side of caution, adhering to a 75-foot clearance rule for cars and people while operating the equipment.\nMake Sure the Snowblower is Off and Cooled Before Maintenance\nSnowblowers contain very powerful engines for their overall size, and they get extremely hot during operation. If a snowblower requires maintenance after it’s been running for a considerable amount of time, the operator should allow the snowblower and the engine to completely cool before attempting any repair or maintenance procedures.\nLikewise, refueling the snowblower should only be done when the engine is cool and there is no chance of starting a fire. It’s extremely easy to ignite gasoline and the vapors that are produced during refueling. Eliminating the engine’s heat will help reduce this risk significantly.\nDuring any maintenance procedure, be sure to remove the ignition key from the snowblower and disconnect the engine’s spark plug wire. This will guard against unwanted sparking or starting of the engine that could inflict serious injury.\nUse Only OEM Parts During Maintenance\nTo further enhance the safety of a Honda snowblower, be sure to only use OEM parts when performing regular maintenance on the equipment. Unlike generic and off-brand replacement parts, OEM varieties are made by Honda itself. That means they are subject to tough inspections and quality assurance procedures that Honda applies across the board to everything the company manufactures. Parts made by Honda will last longer, be more durable, and will lead to greater safety, than those parts that are crafted by generic factories around the world.\nWhere to Shop for Honda Snowblower Parts\nOwners of Honda power equipment are likely aware of the importance of OEM parts, but aren’t sure exactly where to buy them. Luckily, one of the largest independent dealers can help customers order those parts and receive them in a timely fashion. At HondaLawnParts.com, Internet users can find everything from spark plug wires to engine parts and maintenance tools, ensuring that a Honda snowblower will be able to run smoothly and efficiently all winter long.\nOwned by Shank’s Lawn Equipment, the company has been in the power equipment business for decades. They have the right combination of experience and expertise to help customers find exactly the parts they need. That commitment to service will further enhance safety this winter, as customers won’t be installing the wrong parts into their snowblower or unknowingly setting themselves up for a potential disaster down the road.", "label": "No"}
+{"text": "Fix Any Problems\nAlarm systems should be inspected on an annual basis by a licensed or certified alarm technician to ensure the system and all components of the system are operating properly.\n- Just like any electronic component, alarm systems wear out and must be serviced on a regular basis.\n- Would you expect to never change the oil in your car and not eventually have engine trouble?\n- The same thing holds true with alarm systems and alarm users must properly maintain their systems to ensure proper operation.\n- Detectors need to be cleaned.", "label": "No"}
+{"text": "I’ve got two bikes. The one I ride most often is a Raleigh Super Record from 1981. My wife gave it to me for my 30th birthday. Through the years, I rode it off and on, sometimes for as much as 40 miles at a time. But biking was not something we ever really got serious about.\nThe Raleigh is a 10-speed all steel road bike. It has stem-mounted friction shifters (you feel what gear you’re in–it’s easier than it sounds). The bike’s finish is scratched quite a bit, especially on the seat tube, where I used to mount a U-lock. It’s a heavy bike, which is great on downhills. It really flies. Uphills are another story. It slows fast.\nSince starting to ride it seriously last summer, I have made a few modifications to the bike. First, I got clipless pedals. They’re a great addition for anyone planning to do a lot of road riding–even something less than a lot. I replaced the gel seat with a cutout model from Performance Bike. Although its front tire has a tan sidewall, I got an all black tire for the back, because of its name brand. For looks, I replaced the torn cloth bar tape with black, gray and white cork tape.\nThe Raleigh with the clipless pedals, black rear tire, and splash tape.\nOne of these days, I might get really brave and make some extensive modifications to the bike. That would involve stripping it to the bare frame, repainting it, and replacing most components. I’d like to lose the stem mounted shifters and get the kind known as “brifters,” or shifter/brake lever combinations. I’d get new wheels, the current 700C size to replace the 27-inch heavy steel wheels, and new brakes. But that won’t happen anytime soon.\nMy other bike is an entry-level mountain bike, a Trek 4900. It was also a birthday present from my wife, from only about five years ago. I never really took to it. The fat knobby tires put up a lot of road resistance, which scrubs off a lot of speed. I have no interest in riding off-road, so the bike is only used as a backup, if the Raleigh is temporary out of commission. I haven’t decided if I’ll keep it or get rid of it.\nSince starting to ride a lot last summer, I’ve been researching bikes, and have come to the conclusion that I need something new. I’ll continue to research, but I have a feeling that that something is just around the corner. When I get it, you’ll be the first to know.", "label": "No"}
+{"text": "What does a cruise ship engine room look like\nWhether you’re curious about a cruise ship’s engine or just want to avoid the cabins surrounding that noisy area, an engine room can be an interesting place.\nWe describe what the engine room of the cruise ship contains, what it does, and the amount of noise and vibration generated in this area.\nWhere is the engine room on a cruise ship?\nOn newer cruise ships, engine rooms are located aft of the ship and on the lower decks. They are not completely aft but closer to midships.\nRegardless of vessel size and engine type, engines are extremely noisy. Engineers compensate for this by incorporating sound reduction features and technology to keep the room well insulated, so it’s less noisy for guests.\nInsulation, in this case, has a dual purpose. It reduces noise and prevents the heat generated by a running motor from escaping onto adjacent decks. On a cruise ship, this is very important, where comfort is one of the top priorities for the cruiser.\nHow noisy is the motor?\nThe decibel range for a standard cruise ship engine exceeds 173 decibels. It’s extremely loud and in a range that can damage hearing in seconds. With good insulation and soundproofing functions, it won’t sound so loud.\nIf you are in the engine room while the engine is running, it will still be very loud, regardless of the noise reduction technology used. To put things into perspective, those entering the room are required to wear hearing protection. Otherwise, they may suffer hearing damage.\nHowever, customers need not worry if their cabins are in this area. The noise level will not damage your hearing as the surrounding cabins are well insulated. However, you can still hear noise and feel vibrations through walls and floors.\nAs mentioned, the motor vibrates while it is running. They can be felt in the surrounding areas, including the huts adjacent to them. This can cause the hangers to vibrate or move other objects in the cabin, which can disturb your rest.\nWhat is the engine size?\nModern cruise ships have more than one engine. Larger ships, such as the Oasis-class of Royal Caribbean, contain six engines. Other ships – like the Carnival Splendor from Carnival Cruise Line – may be as few as four, depending on the size of the ship, its age and the cruise line.\nThe engine room itself is vast and spans several decks. Space is needed not only for massive engines, but also for fuel tanks, generators, engine workshop and control room.\nHow does the heat escape from the machine room?\nHeat from the engines is removed through a series of heat exchangers. This is on the exhaust path that precedes the turbocharger on the path to the scrubber. The exhaust gases reach a temperature of 663°F but are continuously cooled by heat extraction until they reach 86°F as they exit the funnel.\nThe engines are fuel and heat efficient. The recovered heat is used for many services, including the desalination of salt water into fresh water and oil heating (if heavy fuel oil is used). Soft water can be produced by reverse osmosis to supplement an evaporator.\nWhere is the fuel stored?\nFuel is usually stored in double bottom tanks. They are distributed along the entire length of the cruise ship with ballasts. The only fuel tanks located in an engine room are the service and slop tanks.\nWhat are the cabins like at this location?\nMost people avoid this area because of the noise. However, there are other reasons why these cabins are less desirable besides the fact that they are noisy.\nThe cabins close to the engine room can be:\n- Smaller than average cabins\n- Do not contain windows\n- Receive engine noise\n- Be subject to vibrations, especially when docking\nThese rooms tend to be cramped and small. They are also not priority parts in the design of the ship. Booking this room may mean you will experience vibrations and noise from the engine. You can hear the crew going back and forth in the engine room throughout the day and night.\nThese cabins are located on the lower deck and amidships. They tend to be windowless and dark. Rooms located in the center of a ship usually do not contain the luxury of windows, which can make people feel claustrophobic.\nAre there any benefits?\nSome people argue that most people don’t spend much time in a cabin – they’re too busy exploring the cruise ship. There’s plenty to do on board, and if you like the social scene, you might not spend much time inside the cabin other than sleeping.\nThe main reason people choose an inside cabin on a lower deck is because it is cheaper. Most people book a cruise for the experience, not for the sleep. Also, what most people don’t know is that if you book a cabin near the engine room, you may be able to upgrade.\nAn upgrade option does not necessarily mean that more money will be needed. This means that if a better cabin is available or vacant, such as last minute cancellations, you can be upgraded for free. However, this is not guaranteed.\nThe engine room is truly the heart of the ship. This is where the crankshafts, pistons and hammers turn to move the ship forward. The chief engineer and crew work 24/7 to keep the entire vessel running smoothly. It allows onboard luxuries like electricity, plumbing and air conditioning to work.\nBesides housing the generators and engines, pumps and heat exchangers are located here to cool the engine and stabilize the engines and fins, in addition to the bow thruster system. Since the equipment is dependent on electricity, modern ships contain backup generators outside the main engine room in the event of a fire.\nAlso read: Future Fuel – What is an LNG-powered cruise ship?\nGenerators power all vital functions to run a vessel, such as emergency lights, communications and navigation systems. If the generator fails, there are also backup batteries that can be used for short periods.\nAll of this machinery is overseen by the engine control room, which contains lights, displays, alarms and switches where every piece of equipment can be monitored to ensure the cruise ship is running smoothly.\nComments are closed.", "label": "No"}
+{"text": "Your cart is currently empty\nProduct image slideshow Items\nALL AROUND TRAIL ENJOYMENT\nThe Rift Zone 27.5 is our most playful trail bike, made for the rider that catches a bit of air off of every root in the trail, is always looking for an alternate line, and ends every ride with a smile. This is an all-around suspension bike with trail performance far out stretching the asking price.\nKey upgrades from Rift Zone 27.5 2:\nThe Rift Zone 27.5 has a Series 3 6061 butted and hydroformed aluminum frame with 120mm travel MultiTrac suspension technology and playful 27.5” wheels. 27.5” wheels fit most riders better and create a lightweight and responsive bike, the most playful trail bike in the line.LEARN MORE\nMultiTrac is an acclaimed suspension system, fine-tuned to have a balanced ride capable of absorbing big hits with an efficient pedaling platform. The rocker link provides a progressive leverage ratio for the rear shock for small bump sensitivity and the feeling of a long travel system on large drops and rocks.\nTrail geometry with short chainstays, low bottom bracket, long top tube, and a slack head angle combined with lightweight and responsive 27.5” wheels make for a playful and quick handling bike.\nRift Zone 27.5 models are compatible with internally routed dropper posts, with internal rear derailleur routing for a clean look and snag free ride.\nBoost front spacing is paired with a 148x12mm Boost rear thru-axle on the Rift Zone 27.5 3 and Rift Zone 27.5 2 for frame and wheel strength, and future wheel upgrade compatibility.\nThe Rift Zone 27.5 1 is spec’d with a 141x9mm axle that is upgradable to a Boost 148x12mm standard, allowing for more options if you decide to take your bike to the next level.\nSeries 3 6061 Aluminum Frame, 27.5” Wheels, 120mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs\nMarzocchi Bomber Z2 27.5\", Rail Damper with Sweep Adjustment, 130mm Travel, Kabolt Bolt-On Axle, 44mm Offset\nFox Float DPS, Performance Series, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50mm, M8x25mm Hardware Top and Bottom\nMarin Aluminum Double Wall, 29mm Inner, Sleeved Joint, Disc Specific, 32H, Tubeless Compatible\nShimano HB-MT410B, 148x12mm, Centerlock, Microspline Freehub Body\nShimano HF-MT410B, 110x15mm, Centerlock\n14g Black Stainless Steel\nMaxxis Assegai, 27.5x2.5\", MAXX TERAA, EXO, Tubeless Compatible\nShimano SLX, 12-Speed, SGS\nShimano Deore, 12-Speed, SL-7100R, I-Spec EV\nFSA Grid, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Boost Spacing\nMego EXO 73mm BSA\nKMC X-12 Silver and Black\nShimano, SLX 12-Speed, 10-51T\nShimano BR-MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor\nShimano BR-MT420, 4-Piston Hydraulic Disc Brake, 180mm Rotor\nShimano BL-M4100 Hydraulic Lever, I-Spec EV Compatible\nMarin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back\nMarin 3D Forged Alloy, 35mm\nMarin Single Clamp Locking\nFSA No 57, Sealed Cartridge Bearings, 1 1/8\" x 1 1/2”\nTranzX, YSP23JL, 1x Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 175mm Travel, 30.9mm\nMarin Speed Concept\nRecommended Sag = 30%/15mm\nStep 1: Set correct pressure in rear shock.\nStep 2: Sit on the bike and cycle the suspension (*with correct riding gear).\nStep 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.\nStep 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.\nStep 5: Adjust rebound setting to ensure proper control.\nMarin recommends that all bikes front and rear suspension feel balanced\nStep 1: After rear sag is set follow the recommended pressure from the fork manufacture.\nStep 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.\nStep 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.", "label": "No"}
+{"text": "We are looking for an energetic and outgoing individual to manage one of our irrigation store locations.\n- Overall responsible for parts and inventory in assigned location.\n- Responsible for selling, receiving, and delivery of parts.\n- Responsible to promote and sell all parts and products\n- Supplies Service Technicians with parts as required\n- Maintains an accurate parts inventory\nIdeal candidates would have an outgoing personality who enjoys helping people, some exposure to a parts department and/or a good understanding of agricultural equipment.", "label": "No"}
+{"text": "glass, mixed media\n0.0cm x 0.0cm\nI buy pieces of glass everywhere I go, ranging from antique shops to car boot sales and charity shops. Then I paint on them using special glass paint which I then bake onto the glass in my oven. It's washable, although I wouldn't guarantee it in a dishwasher.", "label": "No"}
+{"text": "LEGAL MACHINE GUNS AND SILENCERS\nWE NO LONGER ACCEPT ANY TITLE 1 TRANSFERS (HANDGUNS/RIFLES/SHOTGUNS...ETC)\nABOUT MACHINEGUNS PLUS\nSince 2005, MACHINEGUNS PLUS has become a well-known Class III dealer in Oklahoma. Several civilian legal machineguns are in stock as well as post '86 available only to other dealers and government entities. A full array of silencers is stocked and ready to submit to the ATF for final approval.\nCivilian legal machineguns\nPre '86 dealer samples\nPost '86 dealer samples\nOther Class III items\nAdvanced Armament, Gemtech, Sig, Griffin Armament....and many others\nPlease contact us for purchases!\nOnline transfers are $25.00 each.", "label": "No"}
+{"text": "Incubator/Hatchery Vent Fan Motors\nIncubator/hatchery vent fan, single phase, TEAO\n40°C ambient, 60hz, aluminum endplates, automatic thermal overload and ball bearings. 1.0 service factor. Extended thru bolts. Pilot circuit. Class B insulation. Motor is not painted, has highly corrosion resistant autophoretic finish on steel band.\n- Direct drive hatchery and incubator fans.", "label": "No"}
+{"text": "Throttle tube for Sur-Ron Light Bee MX eMTB. I've crashed my Sur-Ron enough times that my throttle tube was destroyed, but the manufacturer and local retailer wants upwards of $75 plus tax and shipping for a replacement.\nThis part replaces the plastic throttle tube only and doesn't replace the throttle mounting assembly, throttle cable, or the little plastic spacer that goes inside the throttle assembly to keep the cable in place. This is a drop-in replacement for the stock throttle tube.\nNOTE: Due to the nature of 3D printing, this part will not be as strong as the OEM parts on your Surron!Features\n- Cheap alternative to an expensive OEM part.\n- Oem fit, and function\n- All 7/8\" handlebar grips fit onto the throttle tube correctly still\nSur Ron LBX", "label": "No"}
+{"text": "The 100th edition of the Giro d’Italia brought with it iconic climbs, enthralling racing and tributes to some of the Corsa Rosa’s greatest champions at every turn. While the battle for the maglia rosa naturally dominated the limelight, the chance to make a mark in a historic edition of the Italian Grand saw battles unfolding all over the road. RoadCyclingUK’s Lorena Jones experienced stages 18 and 19 from the heart of the race – watching the former from an official race car and the latter from the skies.\nChanneling his way through the storm drains, refusing to let go of Mikel Landa’s wheel, Tejay van Garderen jumps from behind his rival and times his attack to perfection with seconds to spare; a quick glance back before the American sits up to take the win. Not just any win but his first ever Grand Tour stage win, on the queen stage of the Giro d’Italia.\n“A stage win would be nice,” van Garderen told me just hours earlier ahead of the start of stage 18 of the race, when I asked him if he was aiming for the maglia azzurra, the Giro’s blue mountains classification jersey. The 28-year-old’s palmares already included three team time trial stage wins at the Tour de France and Vuelta a Espana – but, despite two top five overall finishes at the Tour, van Garderen was yet to cross the line arms aloft at a Grand Tour.\nSat in the front passenger’s seat inside the official race car, now a few kilometres ahead of the start line, the unexpected serenity inside the vehicle is quickly replaced by a buzz of excitement as we attempt to catch a first glimpse of the riders through the rear window. The driver steps on the accelerator as news of what is happening behind us begins to crackle over the race radio.\nThirty seconds, 40 seconds… the distance between the early breakaway and the peloton quickly increases. It’s a familiar format in almost any bike race, with a group of valiant riders attacking in hope of glory – this time on one of the Giro’s most important stages through the Dolomites. The intensity with which the start of the race unfurls is both surprising and leg-sapping, and while van Garderen isn’t in the initial break, he’s part of a later escape which goes on to contest the win.", "label": "No"}
+{"text": "Can't tell form the angle of that photo. Will try to describe.....\nWhen you tilt it, there will be a tube tht the whole engine swivels on. If it pokes out each side of the two clamps that fix it to the transom, and is threaded on both ends, the answer is yes.\nIf no, I'm no Honda expert, but you may find that there is a replacelment \"tilt tube\" that will take a steering cable that replaces a neater (i.e doesnlt stick out either end) one for the manual control ones.\nOh, and welcome to Ribnet by the way!", "label": "No"}
+{"text": "Trek's goal was simple: Build the lightest production road bike possible. That's where simple ended. Conventional thought was stripped away, every frame detail analyzed and every frame size tested. And then re-analyzed and retested. The road has been long and we proudly present to you the Emonda—a groundbreaking road bike you must come ride!\nDeflate Those Knobbies! - By all means, if you're riding your fat tires exclusively on pavement and smooth surfaces, inflate them as hard as you like (don't exceed the manufacturer's maximum recommendation printed on the tires' sidewalls). If you're riding off road, however, seriously consider lower pressures -- in the 35- to 45-psi range, depending on the terrain and your weight (if it's really rocky and/or you weigh 200 pounds or more, stick with 45 to 50 psi). Softer pressures greatly increase control and comfort while improving traction and handling. Indeed, if you've been riding off-road on 50 to 60 psi, you'll be amazed at the improvement in ride quality.", "label": "No"}
+{"text": "OS FS91 Surpass Four Stroke\nThis OS engine was badly neglected. It didn't have a lot of run-time but it never got AFTER-RUN oil and then sat for a very long time. This is what happens!\nThe engine is all be destroyed from corrosion as depicted in the photo. The valves are stuck, the piston ring is stuck, and the rod is seized to the wristpin! The bearings are totally destroyed and the crankshaft is rusted as well as the camshaft. The only good news here is, no one attempted to run the engine in this condition. If it happened to start (un-likely) it would have ruined ALL the moving parts. Like it is, the engine is very salvagable with some work.\nI'll begin with restoring the crankshaft.\nThere is some pitting on the counterbalance but it won't be a problem. The main thing is, the rod journal and bearing surfaces are OK. The worm-gear (that drives the cam) is still in good shape and just needs a little extra cleanup.\nThe crankcase will have to go back to the cleaning vat for several more hours.\nThese parts (except the piston ring) are in good condition. The piston ring \"suggests\" the engine did not have much run-time on it! It wasn't broken-in and there wasn't any fuel residue on the top of the piston. I bet this engine didn't have 20 flights on it.\nThe new front beraing is seated by heating up the crankcase enough for the bearing to drop in without force. A hot-air gun is perfect for this job.\nThe same method is used to install the rear main bearing. Using the crankshaft to seat the bearings insures perfect alignment. While the engine is still hot, put several drops of oil on the bearings. The heat provides great penetration for the oil. After it cools off rotate the crankshaft to be sure it's smooth.\nLubricate and insert the piston & rod assembly in the jug and connect it to the rod journal on the crankshaft. This may take you a few tries, but it will go on. Do not force it!", "label": "No"}
+{"text": "Wiring audio xlr female to female\nmini audio jack female wiring\nRemote Audio 5-Pin Stereo XLR Female to Dual XLR Male CAXSTE25\nwiring audio xlr female to female mini audio jack female wiring mini audio jack female wiring audio xlr wiring diagram meaning rj45 female to male rj45 wiring diagram wiring diagram xlr to 1 4 mono jack wiring diagram xlr plug to phone jack car audio wiring color codes back to stereo\n1.5m XLR Female to 3.5mm 1/8\" Female Port Jack Adapter ...\n2 RCA male to XLR female Audio Stereo Cable 5FT / 1.5M | eBay", "label": "No"}
+{"text": "Caterpillar Inc. is an American company that manufactures, markets, and designs and sells engines, insurance, financial products and engines to clients through a global dealer network. Caterpillar is a global leader in the manufacturing of mining and construction equipment, diesel electric locomotives, and natural gas and diesel engines and industrial gas turbines. Caterpillar’s headquarters are located in Peoria, Illinois, United States.\nCaterpillar has a global dealer network that assists the company to run its operations across the globe. Caterpillar continues to expand its operations aggressively in developing markets such as China, Brazil and other parts of the world.", "label": "No"}
+{"text": "Compatibility6-hole disc hub, standard and postmount frame and fork mount.\nCapacity2 hydraulic disc brakes (front and rear) + 2 discs (160 mm) + fastenings.\nPrecisionLength of hose: 800 mm front and 1400 mm rear.\nEasy assembly / dismantlingEasy to assemble and adjust. Mineral brake fluid.\nComposition1 front disc brake (800 mm). 1 rear disc brake (1400 mm). Screws for callipers and disc. 2 x 160 mm discs with 6 holes. Semi-metallic brake pads, compatible with \"Tektro Auriga\" Mineral brake fluid. Post mount attachment or international standard.\nCompositionChassis : 100.0% Aluminium\nProduct restrictionsHave the assembly checked by a qualified technician.\nProduct catchlineHydraulic disc brake kit for mountain bikes.\n2 / 5\n1 user recommend this product\nOk but13/07/2018Response of the brandThank you for taking the time to give us feedback regarding this hydro brake set.\nI'm unsure as to why the screws threaded so badly. Ordinarily this should not be an issue at all. I will forward this on to the design team today.\nAs with as disc brakes, it's critical to always bed in your pads before the first use. A tip is to splash some clean water on you pads, pedal up to a decent speed (on the flat) and brake gently to a near stop half a dozen or so times, braking performance will improve a lot if the pads or rotors are new. Giving the rotors a clean with a rotor spray will help a lot as well. Any other contaminant can ruin pads.\nPeter Lazarus, National Cycling Manager, DECATHLON", "label": "No"}
+{"text": "250W Rear Motor Electric Bike\nOur Women's 28 Inch 36V 250W 3 Speeds City Ebicycle\n, Mechanical Disc Brake Mountain Bike\nare going to all parts of the country and overseas markets. We are committed to let you truly realize that our products are properly around you. We are a professional 250W Rear Motor Electric Bike manufacturer in China, engaged in providing bicycles made in Taiwan, China with cheap price. Please feel free to wholesale customized 250W Rear Motor Electric Bike at a discount price from our factory.", "label": "No"}
+{"text": "|Motor:||350 Watt Tranz X Mid Drive|\n|Battery:||36 Volt 11.5 Ah, 417 Wh Downtube Mounted|\n|Colors:||Color With Tropical Accents, White With Maroon, Black With Blue|\n|Features:||Beach Cruiser, Extra Wide Tires, Relaxing Upright Position, Multi Color SoCal Style, Light Weight, Tranz X Mid Drive|\nFind out more about this electric bike!\nContact us to schedule a test drive so you can try out this electric bike youself.\nCall: (718) 788-1181 or\nEmail: [email protected].\n...or use our convenient contact form below.\nWe look forward to getting you the right electric bike for you!\nA value-priced cruiser from a larger trusted company, available in a high-step and mid-step frame styles with one color pattern for each (white or metallic gray.\nEfficient mid-drive motor keeps weight low and center, the battery clicks in from the left and can be charged on or off the frame, pre-wired for lights, optional trigger throttle works from standstill.\nDecent mechanical 160 mm disc brakes, aluminum paint-matched chain cover keeps your pants clean, larger balloon tires add comfort along with the swept-back steel handlebar and larger saddle.\nGreat pedals and kickstand, mounting points for adding fenders but not a bottle cage or rear rack, basic 7-speed drivetrain with oversized Shimano thumb shifter, two-step on/off process, some wires exposed below motor casing.", "label": "No"}
+{"text": "At the recent Las Vegas GP, officials waved the chequered flag, and Fernando Alonso, the Spaniard, finished a mediocre P9 in the race. Despite facing multiple challenges within the race, the 42-year-old still managed to finish under points in the Las Vegas GP.\nThe Spaniard spun out at turn 1 in the beginning of the race and it seemed that he lost grip on the track. This subsequently resulted in a collision with Valtteri Bottas in the race and caused him to lose all his positions at the beginning of the race.\nFernando Alonso opened up about his thinking about the new Las Vegas Strip Circuit. The 42-year-old added that it was not fun to drive there. Despite the show looking good the Spaniard highlighted the issue with the track and insisted that the cars could not tackle the corners at 80kph.\nThere is not much fun to drive at this kind of circuits, at 360kph, with no grip, no visibility and bouncing like hell, I know from the outside, the show maybe looks good, but these cars are not made to go around corners at 80kph.\nThe 42-year-old recalled other circuits in the racing calendar like Suzuka and Barcelona and asked for a shift in the calendar to maximize championships at these circuits. He reckoned that the traditional races should stay where the F1 cars can shine.\nThey are made to go to Suzuka, to Barcelona and Silverstone and maximize the potential - that is where we need to balance the championship and the calendar. It is what we are doing, but I don't think that this is the only way to go - we need to keep the traditional races as well.\nThe inaugural Las Vegas GP faced backlash throughout the weekend. Although, the racing spectacle during the Grand Prix was appreciated by fans and drivers alike.\nFernando Alonso opened up about the spin-out in the race\nFernando Alonso was still unsure about what happened during the race. Alonso claimed that he still needed to watch what happened after the race and added that he hadn’t seen the TV yet.\nThe Spaniard was also unsure if he was alone or if he was sandwiched between two drivers at turn 1. Additionally, he added that he saw the Alfa Romeo of Valtteri Bottas in the race and that was it.\nDespite the fall-out during the race and losing positions quickly, the 42-year-old was still content with the final race results. As his teammate Lance Stroll finished P5 and amassed a total of 12 crucial points for the team, Alonso was satisfied with the race results.\nAditya Pandya is a Formula 1 content writer at FirstSportz. Currently pursuing BTech from MIT ADT, Pune. Aditya was introduced to the world of Formula 1 after the infamous championship battle between Lewis Hamilton and Max Verstappen in 2021. Presently, he aims to channel his passion for Formula 1 through his writing and also wishes to attend the Monaco GP once in his lifetime. Aditya is also a big time gamer and loves to play FPS games. He is a massive fan of Daniel Ricciardo\nFirstSportz is the First Stop for all sports fanatics. Starting in 2019, we initially covered Olympic Sports, but in 2021 we added every other sport which you might be looking for, like NFL, Golf, MLB, WWE Cricket, Football, Tennis, Esports, NBA, MMA and more.", "label": "No"}
+{"text": "Original post by: Murali Dharan ,\nI own a Core i7 version with 16GB RAM with a 1TB 5400rpm hybrid drive. But the chipset is the same as yours. So, there mustn't be any issue with a 2*8GB configuration, hybrid drive or a 7200rpm drive. You can install all of this by yourself. Just remove the bottom panel by removing the 6 screws (2 are fixed to the plate) to expose the HDD and the RAM modules. Install and then close.", "label": "No"}
+{"text": "Posted 04 November 2009 - 12:28 AM\nI installed SoftICE about 4 months ago, and I just installed Skype, when im started Skype it says it can't run with softice, so I uninstalled it, but it still says it's installed. Now Daemon Tools isn't starting either :S\nCan anyone help me get rid of the traces/files that could be still causing it to be found?\nI've looked through the registry, cleaned temp etc. but nothing.", "label": "No"}
+{"text": "There are one large image and several thumbnail. One of the tittle is Paint the front door. Read this before you paint your front door diy. Painting your front door al lowry painting. Keeping up with the kitchen mom how to paint the front door. Paint the front door helpful tips.\nLarge picture on this page is categorize in paint front door.", "label": "No"}
+{"text": "PORT COQUITLAM, British Columbia (BRAIN) — Norco’s new 2015 Threshold ’cross race bike is heavily influenced by the B.C. brand’s mountain bike heritage, with through-axles both front (15-mil) and rear (12-mil), disc brakes, snappy handling and a sub-1,000-gram, laterally stiff carbon frame.\nThe frame’s size-scaled tubing ensures that a heavier rider on a larger frame will experience the same ride characteristics as a lighter rider on a smaller frame, while proprietary Gizmo cable routing features plugs that create tight seals at entry and exit points, blocking water and debris from entering the frame and preventing cable rattle.\nThe four carbon models range in price from $2,115 for Shimano 105 spec to $8,485 for Dura-Ace Di2. The Threshold is also available in four aluminum models from $825 to $1,415. Bikes should reach retailers starting in July.\nMore info on Norco’s website.", "label": "No"}
+{"text": "Price for 2.\nWhile the stunt scooter industry worked to play catch to Root Industries AIR Wheel, Root Industries took things to the next level. They created an, even, lighter wheel. In 2017, the Honeycore wheel was invented. This proscooter wheel has a peculiar honeycomb cutout pattern that saves weight, looks great, and performs even better.\nRoot Industries Wheels are priced in pairs.", "label": "No"}
+{"text": "Cabe (Nuova Cabe) flail parts\n- Article number: 808-63-rm-8\nFlails and accessories for your Cabe (Nuova Cabe) machine\nCabe (Nuova Cabe) wearing parts that fit your machinery from RDM Parts. You want to keep the results of your machine optimal, that’s why it is important to replace wearing parts in time. Dull and worn down parts need more power to operate. This uses more fuel and can cause defects. Find and replace worn parts in time by looking them up in the parts book of your Cabe (Nuova Cabe) machine\nthe attaching of Flails\nAttaching of the flails is done with a chain or other accessories to the flail axle. To be certain that you have the right flail for your Cabe (Nuova Cabe) machine you need to take a good look at the length and width of the to be replaced flail. It is also important to note that not every flail fits every mower. RDM Parts provides the ability to filter on brand, length, width and thickness.", "label": "No"}
+{"text": "walk in closet layout ideas master closet design ideas walk.\ncar collector garage car collector garage com for the real estate needs of car collectors car collector garages for.\nliving room closet ideas living room closet design living room closet ideas elegant living room closet ideas great modern interior living room closet.\ngarage car service car service the garage and repair workshop for all makes of vehicles engine rebuilds servicing diagnostics tuning auto.\nentryway closet door ideas entryway closets small entry closet ideas corner entryway entryway coat closets entryway closets.\nbathroom remodeling fort myers bathroom remodel fort elegant home.\n2 car garage door cost how wide is a 2 car garage door door garage garage doors prices new garage door.\none car garage door one car garage door lovely adding attached garage with breezeway pictures.\ncar garage equipment rtificate garage equipment car collision repair bench.\nbackyard flower gardens backyard flower garden flower gardens a beneficial way to add more beauty to.", "label": "No"}
+{"text": "Results 1 to 4 of 4\n09-16-2012, 01:13 PM #1\nRegan Smith 2012 Fanfare Shoe Auto #11/25\n09-16-2012, 01:53 PM #2\nI have a Kyle Busch Shirt from this years fanfare /99 (one color) that I can trade. I am not sure what else you would want to even out the trade. LMK. Thanks.\n09-16-2012, 02:15 PM #3\nwhat do u need for these?\n09-18-2012, 04:17 AM #4\nI just traded the Mendenhall auto and I thought I had the other Busch card but that must have been traded too since I can't find it. I just bought a bunch of racing yestarday but didn't have time to open it. I will LYK what I get, if any, Busch cards. The stuff that I bought was Fanfare and Showcase.", "label": "No"}
+{"text": "I have a Strikemaster 3 Magnum ice auger that I haven't used in around 10 years. I pulled it out and filled it with the proper mixed fuel, took out the spark plug and cleaned, and reinstalled it. It looked good. Anyway my arm gave out after 100 pulls or so and it still won't start. Any suggestions from those of you that use these often. I have long lost the manual and can't find one online to troubleshoot.", "label": "No"}
+{"text": "I have been handed 2 Hornby class 56's in DC (R2646 Latest run of 56's). One had a directional lighting issue in that all lights came on whatever direction the engine ran in. Work to date:\nAll diodes checked and operating fine. all wires from the el/board to the tabs checked for a short circuit, found none. checked the contacts from the tabs to the lights and alignment from the body with the tabs and they were fine.\nThe second engine the motor would not rotate, no hum or any indication to go, no lights either at any power setting. The circuit breaker did not activate. Work to date:\nChecked for continuity across the wheels on the bogies and the resistance was low. In other words there is a short between the + and -. Disconnected the motor, no good. Checked the wires from front and back bogies for shorts and to insure that they were correctly connected i.e. + to + etc.\nMy conclusion is that the el/board is faulty in both engines. One option is to install a bachmann chip and hard wire it eliminating the el/board. This will operate in DC an well as DCC.\nHas anyone ever had an issue with this engine and any ideas as to what else to check?", "label": "No"}
+{"text": "His early hobby was designing and building model aircraft, while paying careful attention to every gram of weight. His own custom design of electrically-powered motor-glider won four electric flight world championships in Europe (1986-1992), and six titles in the United States. In 1991, he designed and built an 800-gram solar-powered model aircraft with a wingspan of almost 2-meters…and it set a world record flight of 10 hours, 43 minutes, and 51 seconds, which was officially recorded in the Guinness Book of World records.\nAre E Bikes Ok In The Rain\nThe e-bike movement has been enjoying a massive popularity boom of late. When bikers are preferring to have a little pedal assistance to everywhere, from the daily commute to cruising through city streets, why not have it too while conquering the mountain trails? You know, just for fun? We have also written a complete guide about the best full suspension mountain bikes.\nWhat Does Gt Bikes Stand For\nI found that by sticking it on 'Turbo' or 'Sport' mode (the upper 2 of the 4 electrical assistance levels) and leaving it in a middle gear, the Centros felt zippy when in full flight, but able to pull away from the lights with no problems. Less lazy riders than me might want to actually use the 10 gears, and will find that in the top gear, it's quite easy to push past the mandated 15.5mph electrical limit.\nHow Fast Do E Bikes Go\nIn addition to this, it is easier to transport and store. It has a foldable design and with the lightweight design, you will find it more reliable. Other than this, the bike also features the Shimano 7-speed transmission system, which makes it elementary to shift the speed. The two-mode bike can function as an assisted bike and electric bike at the same time. It provides a longer runtime due to the 36V 8Ah lithium-ion battery.\nHow Do You Put An Electric Motor On A Bike\nHow Do Pedal Assist E Bikes Work\nThe wheels are outfitted with sturdy stainless steel spokes that offer equal parts strength and durability. You can expect to ride up to 27 miles in favorable conditions, including no wind and flat terrain, before needing a recharge. Comes with seven-speed Shimano gears along with front and rear mud guards, a water bottle holder, and a bell and reflectors.\nAre Electric Bikes Dangerous\nThere are various kinds and classifications of electric bikes on the market, but the most common type is the Class 1, or pedal assist, bikes which have motor units that are activated by pedaling and are limited to lower speeds. In the US, Class 1 electric bikes, the type tested and reviewed here, are limited to a top speed of 20 mph, and their motors are designed with a speed governor to regulate this. These types of e-bikes resemble modern mountain bikes, but they have significant battery packs, and small motor units integrated onto and into the frame design. The e-MTB pedal-assist motor is typically built around the bottom bracket and provides varying levels of pedaling \"support\" directly into the drivetrain while the cranks are turning. Most drive unit systems offer several support settings that provide pedal assistance between 25% and 100% of the user's pedaling input.\nHow Will Roof Rack Affect Your Car Performance\nWhile we liked the value, component specification, and versatile all-around performance of the Trance E+ 2, it wasn't all gold stars. E-bikes are heavy, that is a given, but the Trance is a little heavier than most at 52 lbs 3 oz. This weight is one of the reasons this bike feels somewhat sluggish at times, especially in low-speed sections of trail. It also has mediocre e-bike controls. Sure, they are functional, but the all-in-one control's display in the form of small LED lights is difficult to see by the left grip and near impossible to read when riding in bright light conditions. Beyond that, we feel the Trance E+ 2 is a quality e-bike offered at a reasonable price.\nDo Gas Stations Have Air Pumps For Bikes\nThis bike appears to be sturdily made and the assembly process was not difficult for anyone accustomed to assembly bikes from their state when shipped. Perhaps, it deserves a 5 star rating and if I was seeking a bike for use on sand dunes, I would probably give it 5 stars, I was looking more of an electric motor assisted bicycle than a motor bike and also found the bike, as a bicycle rather heavy and awkward to use as a bicycle with the fat knobby tires.\nDo Fixies Have Brakes\nThe bikes we tested all use a different e-bike motor system, and the controls, the primary user interface, are an important element we rated but didn't weight as heavily as some of the others. Each motor system and its associated controls are slightly different. Our primary interest is in how user-friendly is it to interact with the system, how intuitive and ergonomic are the shifters, how good and easy to read is the display, and how easy is it to charge the battery? Each drive system also has a smartphone app that is intended to allow the user to fine-tune the motor's support settings, create custom settings, monitor battery charge and health, and a whole lot more. We don't feel the apps are necessary for the use of any of these e-MTB's, but those with an affinity for technology or personalizing your ride may be inclined to use them.\nAre E Mountain Bikes Allowed In California State Parks\nJeremy Benson eats, sleeps, and breathes mountain bikes. This native New Englander started mountain biking in 1992. He got more serious in college and started racing bikes in 1999. After moving to Tahoe, Jeremy continued his obsession with riding. He continues to race mountain bikes and has racked up some impressive results in the expert class at the Downieville Classic and the Lost and Found Gravel Grinder. Jeremy authored Mountain Bike Tahoe which was published in 2017. Jeremy's riding statistics are eye-popping, to say the least. He rode over 5,000 miles in 2018 climbing nearly 600,000 feet. Oh yeah, he was also a sponsored skier for well over a decade. Jeremy has a very critical eye and is also good at breaking things. These are wonderful traits for bike testers.\nDo You Need A Licence For A Electric Bike\nThere is no crossbar or crazy geometry to speak of, simply a high modulus carbon front frame that is connected to a trailing arm. Even the wheels are cutting edge, with the special patented quick-detach \"Pitstopwheels\" fastening to a central hub like a sports car. On top of this, there's a futuristic Knightrider-esque \"cockpit\", which consists of numerous coloured LEDs that give slightly abstract readouts on battery range, gear selection and speed. Again, lighting is built in, drawing power from the main battery.\nThe bike has three speed modes: low, medium and high. The top speed is about 18 miles with motor only and 25 mph with pedaling. The range you can get out of the motor is about 30 miles, but since you can pedal it just like the traditional bike after the battery dies, there is really no limit to how far you can go. 21-speed gear shift system allows you to be in full control of your ride, and front and rear disc brakes protect your safety. The Ancheer electric mountain bike is also equipped with LED headlight and horn.\nDo You Still Burn Calories On Electric Bike\nAncheer Power Plus electric bike is definitely one of the most economical e-bikes. What that mean is that this is not a premier quality bike, but what you’re getting for the price is pretty good. The Ancheer Power Plus is powered by 250W high-speed brushless motor, which is more than enough power for any terrain. Depending on your weight, you will probably need to pedal if you go uphill, but with the electric assistance it will be very easy. If you need to use motor only, just twist the throttle and go.\nAncheer has become an icon in electric bikes and this mountain bike has earned itself a spot as the best electric mountain bike to ever grace the market. The electric bike comes equipped with a 250 Wat motor and a 36-Volt removable battery that pushes this bike to the extreme. It has an amazing pedal assist functionality which makes it an excellent bike for outdoor and leisure riding.\nDo You Need A Licence For A Motorised Push Bike\nThe Bulls E-Stream EVO AM 4 is a new addition to our electric mountain bike test and it didn't take long for our testers to fall in love with this new contender. This bike comes ready to rumble with a beefy enduro ready build with 150mm of front and rear wheel travel controlled by a stout RockShox Lyrik fork up front. Testers found this bike to come alive at speed with stable and confidence inspiring trail manners that preferred to go fast, and big 2.8-inch wide Schwalbe tires that provided heaps of traction. Bulls has done a good job designing this beast, with a powerful and smooth Brose drive unit cleanly integrated into the frame along with a large 650Wh battery. The motor lays down very smooth power in all of its output settings and is one of the quietest models we tested. The large battery storage capacity provides the longest distance range of all the models in the test so you can stay out longer and ride farther than on models with smaller batteries. The e-bike controls have relatively good ergonomics and an easy to read display.", "label": "No"}
+{"text": "A boomerang day after the market dropped sharply at the open then rallied like a runner on steroids right into the close. Tomorrow we'll get a better perspective on how much of today's pop was short covering protection.\nI'm working on the final integration of the Beta and M3 models to produce a new version of M3 that will be a true Long/Short model...without ever having to actually assume a short position. The new M3 will be both simpler and more sophisticated than the previous version.\nHere's today's closing view of the main panel>>>>>", "label": "No"}
+{"text": "Four Winns Horizon 190 Sunsport in mint condition. Full carpets, cockpit and bow covers. Bimini top. Cool box. Ski locker. Loads of under seat storage. 4.3 GL Volvo Penta engine. Volvo Penta SX-M outdrive. 140 l petrol tank. Only 143 hours on the engine, but well maintained. Fuel stabiliser used on every fill. Raw water side flushed after every use. Volvo Penta fresh water cooling system installed. Garmin GPSmap/fish finder. Icom VHF. Recent battery. New exhaust manifold and up risers to be installed. Beautiful boat in every respect. Beamy with plenty of room for all the family. Supplied with launch trailer. Very reluctant sale, but I sadly no longer have the time to use this fantastic boat. Can deliver up to 50 miles from GU34.\nCurrent Price: £9000.00\nThis Four Winns Horizon 190 Speedboat Not Searay Bayliner Larson Maxum Fletcher boat is located in Alton, GU34 5AH and is being sold on eBay by johnprossiter2010.", "label": "No"}
+{"text": "When you determine that your starter is bad on your riding lawn mower, it's time to change it. Lawn mower starters look very similar to automobile starters and will qualify for a rebuild and therefore a rebate on a newly purchased starter. Although you can certainly take your mower in to have it professionally serviced, the reality is that anyone with some solid do-it-yourself experience can complete this task themself and save a lot of money.\nRemove the old starter. Disconnect the positive wire from your battery using the correct wrench size, turning the nut in a counterclockwise motion.\nDisconnect the wire from your starter with an appropriate wrench.\nLocate the two bolts on the mounting plate that hold your starter in place against the side of the mower engine. They are generally 3/8-inch or 7/16-inch bolts.\nFind the correct socket that fits these bolts, and attach them to your ratchet head. Begin unscrewing the bolts in a counterclockwise direction.\nOnce the bolts are out, gently pull the starter off the engine side.\nTake the new starter, and place it in the exact same position where you removed the old one. Carefully line up the starter gears with the flywheel gears on the riding mower. The teeth should mesh together perfectly.\nThread the bolts through the mounting plate holes and into the engine. Turn them clockwise by hand to get them started, and tighten them firmly with your ratchet.\nReattach the wire to both the starter and the battery, and turn the ignition key to test the connection.\nThings You Will Need\n- Socket set\n- New starter\n- With the wires disconnected, both from the starter and the battery, it's always a good idea to clean and brush them off to insure a positive and trouble-free electrical connection.\n- Although you are disconnecting the power from the battery, there is still a chance of a minor electrical shock, so always be careful.\n- Replace the Battery in a Homelite Electric Mower\n- Change the Blades on a Huskee Riding Mower\n- Adjust the Guide Bar & Chain Tension on the Husqvarna 55 Rancher\n- Do I Test a John Deere 110 Ignition Switch\n- Hook Up a Lawn Mower Battery\n- Remove a Carburetor From a Lawn Mower\n- Remove a Homelite Trimmer Clutch\n- Start a Riding Lawn Mower\n- MTD 139 CC OHV Engine Specs\n- Start a Gas Weed Eater\n- Charge a 12 Volt Mower Battery\n- Honda Rancher Winch Install", "label": "No"}
+{"text": "We are proud of our reputation, which has developed over the years by adhering to a simple set of values:\nTrust and reliability are the foundations on which we have built many successful relationships. We will continue to base each new relationship on these values.\nWe strive to offer a fair deal to our customers, our brand owners and our staff.\nThe fuel that drives us to continue building on our achievements.", "label": "No"}
+{"text": "B.C. to D.C.\nJoin Date: Oct 2005\nLocation: between the Popeye's, the liquor store, the funeral home, and the strip club\nBikes: 1992 Miyata Nine 14; 1971 Raleigh Super Course fixie conversion; 2006 Jamis Nova (853 version); 2001 Diamondback Topanga (SS conversion); 1956 Rudge Sports; 1971 Raleigh Competition (processing); 199? Schwinn World Sport (processing)\nMentioned: 0 Post(s)\nTagged: 0 Thread(s)\nQuoted: 0 Post(s)\nhey aaron, I ride a 2006 Nova as my commuter, and a couple folks in the shop where I work ride the '07s.\nthe nova is a great all-rounder bike, and will indeed do well by you. I think they've ironed out a lot of the kinks that plagued my '06, particularly surrounding the front crank (boo truvativ). I had a frame with very flaky paint, but I think that was just a one-off problem.\nThe only issue I've seen with the '07s was two bikes that came back with cracked seat tubes, both ridden by pretty big dudes. We sell the hell out of the Nova, and I haven't seen any further probs. In any event, Jamis has excellent customer service and will do right by you.\nThe Nova with slicks will definitely keep you competitive on the road, but if you're \"serious\" about triathlons, it might not be the best bike--although I know next to nothing about triathlons. As a cyclocross bike, it's meant to be sized small and ridden more upright in conditions where aero is not that big of a concern--the cantis and big fork will create wind drag, etc. While still plenty nimble, it also has a slacker (slower-turning) geometry compared to a lot of road bikes to help you maneuver through offroad stuff.\nAll this doesn't mean you can't convert it into a tri bike, but you'll probably have to monkey around with spacers and stems so you can get the bars down and in for an aero position. riding aero bars offroad might not be such a great idea either. But heck, I know a dude that did a triathlon on his mountain bike with knobbies, so again, it just depends how \"serious\" you are.\nAnother option is the jamis quest, which is a straight-up 631 road bike with rack/fender eyelets so you can carry your kid. It's not as versatile in the sense that it doesn't have the tire clearance for offroad knobbies, but it's a very respectable bike, equal or slightly better than the nova for road applications.\nIn any case, I would recommend kid trailers over bike seats or sitting on the rack any day. Way safer, better handling, and probably more fun for the kid, as they can draw or whatever (I have a 20-month old). You can find them cheap on craigslist. Easier for toting groceries/picnics/kid supplies, etc.\nLast edited by comradehoser; 09-11-07 at 09:48 AM.", "label": "No"}
+{"text": "A couple weeks ago, my bike started making this really loud creaking sound. The sound is coming from somewhere near my feet... not sure what is making the sound, but I think it has to be something involving the pedals or the crank or something like that. My bf thought it might be the chain stretching. I notice it usually seems to happen when I switch gears and it will creak as I pedal for a little ways and then the noise stops until I need to change gears again. It happens more often when on the big chain ring than the small one, but it's not consistent enough for me to pinpoint what exactly might be causing it. Any ideas on what is making my bike creak and how to fix it? Also, if it matters, I bought this bike back in March and it hasn't had a tune-up yet. I don't know if that makes a difference or not.", "label": "No"}
+{"text": "Footprint Tools Returns to the Cologne International Hardware Fair\nAfter an absence of six years Footprint Tools will once again be exhibiting at the Cologne International Hardware Fair as part of the British section in Hall 10.1, Stand B013.\nAs the manufacturers of the Footprint brand of Sheffield made, quality hand tools – the professionals’ choice – the company is delighted to return to this important exhibition, giving it the opportunity to update its many customers worldwide on changes to the Footprint range and the exciting developments for the future.\nThe display will showcase the world famous and iconic Footprint wrenches, Footprint line pins together with the company’s full ranges of builders, decorators, joiners and plumbers tools. This time there is a difference – bolsters in action splitting rocks taken from the pit dug to accommodate the refurbished and recently commissioned forging hammer.\nRichard Jewitt, managing director, and Timothy Jewitt, sales and marketing director, will be representing the company and look forward to welcoming many of the company’s customers and contacts from all over the world to the stand.", "label": "No"}
+{"text": "Toilet Seat Paint Color Almond Blanched Colored Round Paintable\n- Posted on:\n- Posted by: azil\ntoilet seat paint color almond blanched colored round paintable.\npaintable toilet seat paint bubbling uk china color shopping guide at,how to paint a bathroom 9 steps with pictures toilet seat painter paintable bubbling,toilet seat paint bubbling coming off uk,toilet seat paint bubbling uk coming off cover ace hardware need to decide on,toilet seat paint uk coming off bubbling dirty bathroom floor peels the door bowl not,toilet seat paint bubbling uk painter century city apartments on the seats are,toilet seat paint bubbling paintable coming off how to behind a,toilet seat paint uk wall stickers paper elegant of a paintable painter,toilet seat paint bubbling coming off paintable sewing tutorials crafts handmade sews blog for,toilet seat folding chair elegant elevated home depot paintable paint coming off painter.", "label": "No"}
+{"text": "As an Amazon Associate, this site earns commissions from qualifying purchases. For more information click here.\nA fuel filter strains the fuel before it reaches the carburetor. Its purpose is to keep dirt and other particles from getting into the engine. Because the filter plays such an important role you have to make sure that it is properly configured. This brings up the question of whether the fuel filter has to be filled or not.\nLawn mower fuel filters have to be filled so air does not get into the combustion chamber. Air will cause the engine to overheat and misfire. If the filter is only half full, there also won’t be enough fuel for the engine.\nThe mower fuel filter is situated right along the pump that transmits gas into the combustion chamber. The filter has to be full so the engine burns fuel properly. If it is not filled or the fuel line leaks, your lawn mower will not start correctly, if at all.\nWhy Should You Fill Lawn Mower Fuel Filters\nIf the fuel filter is partially empty, fuel efficiency is reduced. There will not be enough fuel in the combustion chamber and this will negatively affect how your lawn mower works.\nThere are many problems that can arise from a half empty fuel filter. The most obvious is the lawn mower runs poorly. The blades do not cut smoothly, the engine stalls or smokes and requires more effort to start. Both push and rider mowers handle poorly with a half filled fuel filter.\nAnother sign of a half empty fuel filter is the loud noise. Your lawn mower will be noisier than usual because the engine is trying to draw more fuel but all it gets is air. The end result is a noisy, smoky engine that keeps stalling. This can affect all kinds of models including the Craftsman M105, so fix it as soon as possible.\nThe engine will also overheat and smoke due to lack of gas. Lawn mowers must have a specific gas and oil ratio to burn correctly. If the fuel filter is lacking, the ratio will be off and cause problems.\nWhy Your Lawn Mower Fuel Filter is Not Filled\nThere are two reasons why this can happen: the fuel line is full of air or there is insufficient fuel to power the engine.\nTurn off your lawn mower and look inside the tank. If there is not enough fuel, fill it up according to the manufacturer’s instructions. Turn on the mower and everything should be fine.\nIf the problem is a leaking fuel line, it has to be replaced. You can do this yourself or take your mower to a service center.\nRelated to this is the problem of the fuel filter emptying quickly. For example, you fill the fuel filter, but after running your lawn mower for 15-20 minutes, it empties out.\nIf this happens, turn the mower off and clean the carburetor. If that does not work, remove the filter and reinstall it. You may have installed it incorrectly.\nAn incompatible fuel filter might cause this problem too. Some lawn mowers will only work with specific types of filters, and so-called universal models may not work. Just as spark plugs are not universal some lawn mowers prefer a particular filter.\nSigns of a Clogged Fuel Filter\nThe most obvious sign is a leaky fuel filter. But there are other indicators even if you don’t look at the filter itself. An overheating engine, poor performance or stalling engines are common indicators.\nEngine problems can also be due to a faulty spark plug or something else, so the best way is to look at the fuel filter itself.\nTo find out if the filter is clogged, observe your lawn mower. Is it louder than usual? Is it overheating or there is smoke? If the answer is yes to any of these, turn the mower off.\nGive the engine time to cool down and take off the spark plugs. Whenever you do any type of lawn mower troubleshooting, it is best to remove the spark plugs as a precaution.\nExamine the fuel filter thoroughly. If it is dirty and leaking it will be very obvious. If it looks larger than when you installed, it is probably filled with debris and grime.\nRemove the fuel filter so you can clean it. If there is only a bit of dirt, wiping with a piece of cloth will be enough. But if it leaks heavily and/or caked with dirt, follow these cleaning instructions. This method works with many types of lawn mowers including the Power Smart 209cc,.\nHow to Clean a Lawn Mower Fuel Filter\nCleaning fuel filters is a bit more involved that say, cleaning mower bags. But if you follow these steps you should be done in a few minutes.\nYou will need socket wrench to detach the fuel lines and protective eyewear to avoid oil spills getting in your eyes.\nStep 1. Turn off the lawn mower.\nStep 2. Take out the fuel pump fuse. Refer to your owner’s manual for its location. After removing it, allow the engine to run for a couple of minutes. Turn it off.\nStep 3. Disconnect the fuel lines using the wrench.\nStep 4. Remove the fuel filter. Tap it to remove residue and dirt struck inside. You can use a carburetor cleaning solution or plain water to spray the inside and outside of the filter. Let the filter air dry.\nStep 5. Put the filter back on once it is dry, and put everything back in the reverse order of how you took them out.\nShould You Clean or Replace Fuel Filters?\nMetal filters can be cleaned with water or other cleaning solutions. Fuel filters made of nylon or paper have to be discarded. Once they leak or covered with dirt, replace them with new ones.\nPaper and nylon filters are one-time use only but they are cheap and easy to replace. Metal fuel filters can be cleaned and reused. Replace if damaged however.\nYour lawn mower manual includes information on what fuel filter it is using. In general though any metal filter is reusable. If there are signs of clogging of blockage, follow the directions given earlier to clean it.\nThe cleaning method will depend on how dirty the filter is. A piece of cloth will do if there is just a small amount of dirt. For moderate levels of dirt and grime, use water. You can wipe the filter with a damp cloth or place it under running water.\nDo not use harsh chemicals or too much water. Unless the filter is really dirty, cleaning will take just a few minutes.\nThe next question you are probably asking is how often to clean lawn mower fuel filters. The answer is as often as necessary.\nIf your lawn mower exhibits any of the signs of a dirty fuel filter, clean it or get a replacement. If your mower is running smoothly then the filter is fine. You should still check it when performing lawn mower maintenance however.\nWhen and How to Replace Lawn Mower Fuel Filters\nLawn mower fuel filters should be replaced after 200 hours of use. But you should replace the filter immediately if it is clogged up and the engine is having difficulty running.\nIf you notice symptoms of a clogged fuel filter, clean it following the instructions given in this guide. If that does not work or the filter is too dirty or damaged, get a replacement.\nFollow these steps to replace a lawn mower fuel filter:\nStep 1. Turn off the lawn mower.\nStep 2. Measure a couple of inches from the fuel filter entryway, clamp the fuel line.\nStep 3. Take the line off the fuel casing.\nStep 4. Remove the filter.\nStep 5. Install the new fuel filter and put the clamps on.\nStep 6. Turn on the engine and let it idle for a minute. Shut it off then turn it on again for another minute. This should get rid of any air trapped in the fuel line.\nNow you can run the lawn mower normally. With the new fuel filter there should be no more issues with leaks or smoke.\nI love the outdoors and all the tools for maintaining gardens, yards and lawns. The only thing I am more passionate about is sharing what I know about garden and outdoor equipment.", "label": "No"}
+{"text": "New Ninja Sets Available For Test of Honour\nEven though ninjas never really wrapped themselves in black like we see in pop culture (that was a kabuki theater thing. Ninjas dressed like everyone else so they didn't stand out), it's still fun to have ninja figures running around on our battlefields in their iconic look. Well, if you're a Test of Honour player, you can grab a bunch of different ninja sets for the game. There's a big set, a blister, and the Dojo Assault bundle.\nFrom the post:\nHiding in the shadows, creeping in the corner of your eyes, the Ninja of Iga have selected you as their next target…Source\nMasters of stealth, ninjitsu, both hand to hand and weapon combat, the ninja is an unprecedented threat on the battlefield, even a skilled samurai has to be cautious when fighting against a ninja!", "label": "No"}
+{"text": "If you want to know where you are, you can use the North Star or Polaris to find the exact latitude. This star is also called the Lodestar and is the north star of the Northern Hemisphere. The angle between Polaris and the northern horizon determines latitude. This star was heavily used by travelers in the past. Its position varies by about 39 arc minutes, which is about 44.7 miles or 72 kilometers.\nThe Polaris program is made up of two parts: an industry project and a masterclass. During the masterclass, you will learn the essential skills and knowledge that are needed for your role. During the industry project, you will work with a partner company to apply the knowledge and skills you’ve learned in class to a real-life project. It’s important to note that both Polaris and PayPal are private, non-profit entities.\nThe star fluctuates in brightness from 1.86 magnitude to 2.13 magnitude. It was brighter in 1963 than it is today, but this steadily decreased until 1966. Afterward, the star’s brightness dropped to less than 0.05 magnitude. The brightening has been unpredictably fluctuating since then, but stayed close to the magnitude of 1966. Recent observations by the Hubble Space Telescope show that its brightness is increasing.\nIf you want to know where Polaris is in the night sky, you must know that it is near the north celestial pole. The Earth rotates on its axis from north to south, pointing to the north celestial pole. This axis makes stars around the pole rotate around it, while those far away travel in much larger circles. There are even stars that travel a long distance around Polaris. So, what is Polaris?\nIf you have ever wanted to travel by night, you can find Polaris by observing the night sky. It is located in the constellation Ursa Minor. It will reach its closest point to the north celestial pole in two hundred years, but it will eventually drift away several degrees. The star is classified as a triple star, with a bright visual component. Its brightness changes too gradually to be detected by the naked eye. Its apparent visual magnitude is 2.00.\nThe position of Polaris relative to the northern horizon depends on your location. It is located near the north celestial pole and is closest to the northern horizon. Observers in the North Pole can see Polaris directly overhead, while those further south are able to see it at a greater distance. A trip to the North Pole, for example, would be at latitude 41degN. Once you reach the North Pole, the star would be directly overhead, and it would not rise or set during that time.\nIf you want to find Polaris without using a telescope, it is located in the constellation Ursa Minor. This constellation contains a group of stars known as the “Little Dipper.” The Polaris star is located at the end of the handle of the Little Dipper. The Little Dipper is typically not very bright, but it is easier to find Polaris by finding the seven stars of the Big Dipper in Ursa Major. The Big Dipper is a bowl-shaped constellation. The stars point towards Polaris.\nAnother bright star in the northern hemisphere is Polaris. While not exceptionally bright, it is still remarkably visible to the unaided eye. At 48th place in the sky, Polaris is the most bright star in the constellation of Ursa Minor. The star is a yellow supergiant and is 2,500 times brighter than our Sun. Its luminousness is primarily due to the distance from Earth. The star is also a triple-star system consisting of two yellow supergiant stars and two white main sequence stars.\nIf you are traveling in the Northern Hemisphere, you can use the North Star to guide you. If you can see it from a good location, the North Star is the first bright star to follow. In fact, it is less than 1 deg away from the north celestial pole. It is also very useful as a navigational star. You can also use Polaris to guide yourself to the North Pole. So, what is Polaris?", "label": "No"}
+{"text": "Discover 5 fully funded scholarships for international students in Italy for the 2024-25 academic year. Secure your education and explore the advantages of studying abroad in a culturally rich environment.\nScholarships for International Students in Italy\nStudying in a foreign country can be an exciting opportunity to explore new cultures, expand your horizons, and receive a quality education.\nItaly is no exception when it comes to offering these advantages to international students.\nIn this article, we’ll explore the financial support options available to international students in Italy, including scholarships provided by the government and universities.\nFinancial Support for International Students:\n- Equal Opportunities: In Italy, international students have access to the same financial support programs as Italian students. This means that, regardless of their nationality, students can apply for various scholarships based on their financial need and academic merit.\n- Government Scholarships: Both national and regional government scholarships are available for international students. These scholarships are typically open to a wide range of applicants and provide financial assistance to cover tuition fees and living expenses.\n- University Scholarships: Some Italian universities offer specific scholarship programs for international students. These scholarships can help cover the costs of tuition and may also provide additional benefits.\nAdvantages of Studying Abroad\nWhen you go to another country for your studies, there are many good things that can happen.\nItaly is a great place for students from other countries, and here are some of the benefits:\n- Experience Different Cultures: You can live in a new place and get to know a different way of life. You’ll meet people from all over the world and learn about their cultures.\n- Get a Good Education: Italy is famous for its excellent education system, which makes it a good choice for studying.\n- Learn a New Language: You can pick up a new language, like Italian, which can help you communicate better and improve your job prospects.\n- Find Job Opportunities: Studying abroad can open up new job chances and let you make professional connections on a global level.\n- Make Meaningful Connections: You’ll have the chance to make important friendships with people from all around the world, both in your studies and personally.\n- Explore New Places: Living and studying in Italy means you can travel and gain valuable life experiences.\n- Become Independent: Studying abroad can help you become more independent and self-reliant as you navigate life in a foreign country.\nList of Fully Funded Scholarships in Italy:\nIf you’re considering studying in Italy, here are some scholarship options to explore:\nPadua University in Italy offers 53 outstanding scholarships through the International Excellence Scholarship program.\nThese scholarships are available to exceptional students from all over the world and can be used to pursue bachelor’s or master’s degrees taught in English at Padua University.\nBenefits of Padua University’s international scholarships include:\n- Financial support for tuition fees and living expenses.\n- Access to high-quality education in a culturally rich environment.\nA “no-cost tuition waiver” is like getting a free education, and you also get a €8,000 scholarship every year.\nYou only need to pay a fee that’s the same as the local tax and Marca da bollo if you’re a student who benefits from this.\nThe €8,000 scholarship will be given in two parts of €4,000 each during the academic year to students who meet certain merit requirements mentioned in the application.\nExplore Scholarships for International Students\nUniversità Cattolica International Scholarship:\nIf you’re an international student interested in pursuing your studies in 2024, don’t miss the opportunity to apply for the Università Cattolica International Scholarship. Here’s what you need to know:\n- Scholarship Details: The scholarship aims to make education more accessible to international students. Those who receive it can enjoy a significant reduction in tuition fees.\n- Tuition Costs: For international students living outside of the European Union and its member states, the standard annual tuition and university fee amount to €8,500.\n- Financial Aid: When filling out your online application, you have the option to request the “UCSC International Scholarship.”\n- Scholarship Benefit: Students awarded the UCSC International Scholarship for the 2024–2025 academic year will pay a reduced tuition fee of €5,600. The best part is that this scholarship is automatically renewed each year throughout your degree program.\n- Enrollment Requirement: To maintain this scholarship, it’s important to remain enrolled full-time and stay on track to complete your degree as planned.\nFor more detailed information, please click here to read more about the Università Cattolica International Scholarship.\nBocconi University Scholarships:\nIf you’re aiming for a world-class education, the Bocconi University Scholarships for 2023-2024 are an excellent opportunity.\nThese scholarships cover the full cost of tuition for both bachelor’s and master’s degree programs. Here are the key details:\n- Scholarship Coverage: The Bocconi University Scholarships aim to provide international students with an education that matches the best in the world, and they cover the entire tuition cost.\n- Early Applications: To enhance your chances of receiving financial aid and benefiting from Bocconi University’s top-quality education, it’s highly recommended to submit your application as early as possible.\nDon’t miss out on these exciting scholarship opportunities that can help you achieve your academic goals and experience world-class education.\nClick here to read more about the Bocconi University Scholarships and take the next step towards your educational journey.\nThe university offers scholarships to international students from any country who are qualified and want to study there.\nThey really want students from different places to apply because they think having a diverse group of students is important for doing well in academics.\nTo apply for these scholarships, students need to be not only great leaders and committed to doing their best but also have really good grades.\nPolitecnico de Milano Scholarships:\nAre you a student enrolled in an international program from anywhere in the world? If so, you’re invited to apply for the Politecnico de Milano Scholarships. Here’s what you need to know:\n- Eligibility: These scholarships are open to students pursuing bachelor’s, master’s, or doctoral degrees in Italy. Funding opportunities are available from the Italian government for these programs.\n- Comprehensive Financial Assistance: Starting with the class that begins in September 2024, Politecnico de Milano offers a scholarship program that provides extensive financial support to deserving students.\n- Merit-Based Scholarships: Every year, Politecnico di Milano offers merit-based scholarships to outstanding foreign applicants accepted into a Master of Science program for the first or second semester. These scholarships are made possible through partnerships with public and commercial entities.\n- Application Process: There’s no separate application for scholarships. All accepted students with a complete dossier (including a language certificate submitted by the deadline) will be automatically considered for any merit-based scholarships available.\n- Types of Scholarships:\n- Platinum Scholarships: Valued at 10,000 euros annually, including a tuition fee waiver. Administrative charges are the only cost to the student.\n- Gold Scholarships: Worth 5,000 euros per year with a tuition fee waiver. Administrative charges are the primary cost to the student.\nSiena University DSU Scholarships:\nThe University of Siena DSU Scholarship is a fully funded opportunity for international students looking to pursue higher education in Italy.\nThis scholarship covers various expenses, including living costs, meals, a monthly stipend, and participation in sports.\n- Selection Criteria: Scholarships are awarded based on academic ability, financial need, and English language proficiency. Applicants must also meet the minimum GPA requirement for their chosen program and gain admission to the University of Siena.\n- University of Siena: With a rich history of academic excellence, the University of Siena offers a unique opportunity to study in a beautiful and ancient city in the heart of Italy.\n- Scholarship Benefits:\n- Tuition fees are covered.\n- Free accommodation or financial assistance for housing costs.\n- Access to free meals in campus dining halls.\n- Financial support for additional expenses such as extracurricular activities, books, and educational materials.\nTo learn more about this exceptional scholarship and how to apply, visit the University of Siena’s website.\nHow to Apply\nInterested applicants can click on the respective scholarship links mentioned above to read more details and begin the application process.\nDon’t miss out on these opportunities to pursue your education in Italy with financial support.\nfor more info do follow / piggybank.ng\nRegister for regular updates", "label": "No"}
+{"text": "Good to know! Glad someone has done \"side by side\" comparison. ;)\nOut of your price range is one thing...but they fit nothing like the Devocoux. They have a similar look but that is about it. My trainer rides in them now....they fit my very difficult to fit big horse that she rides. He has HUGE shoulders, high withers and a significant curve in his back...the hardest thing about fitting him is his big shoulders. The saddle is really nice on him and flexible giving him the freedom in his shoulders. My point is that they do NOT fit like a Devocoux.", "label": "No"}
+{"text": "The art of branding an organization can be a complicated process and mishaps happen! When branding goes well sales rise and consumers get engaged, but when it goes bad the damage to an organization’s reputation can last for many years. Below are four common branding errors and some ideas to realign and get past them.\nMishap #1 – Inconsistent Use of Brand Across Digital Channels\nThe digital world is huge right now, and with the onset of the pandemic businesses need to be visible and easy to connect with online to thrive and grow. A recent study by ClickZ Marketing Technology Transformation shows advantages of omnichannel marketing automation including 250% higher purchase frequency and 90% higher customer retention rates. Which means that having a strong and consistent presence on the top digital channels (see list below) is critical to success. Make it a point to review your channels on a weekly and monthly basis to ensure all graphics, visuals and content are sending the same message and speaking the same language. In fact, make it someone’s job to ensure brand usage is consistent!\nTop Digital Channels:\n- Social Media\n- Display Ads\nMishap #2 – Disconnect Between Content Strategy and Brand Strategy\nA brand strategy is the blueprint for building and growing a brand, basically the purpose of an organization … why it exists and what it does. Which is pretty much the foundation of a business. A content strategy is a tool to communicate what the organization is through content (i.e. print and digital channels). A misaligned content strategy dilutes a brand to the point it confuses and turns customers away creating little to no emotional connection to the brand. Look at your website … does it clearly articulate your mission and vision and how the product or service makes customers’ lives better?\nBelow are a few ideas on how to align content with branding.\n- Create brand stories that include a value proposition and support the core identity of the organization.\n- Implement brand guidelines for creating content that will be used on all marketing and communication channels.\n- Develop campaigns for core business initiatives that are anchored in the organization’s brand values, mission, vision and value proposition.\nMishap #3 – Cutting Corners on Your Logo\nA logo is a symbol that provides powerful brand recognition for your organization to consumers, investors, and competitors. Many factors can influence the development of a logo and often people will focus on getting the simplest and cheapest logo available because the process is daunting to them … or they just don’t see the ROI on really investing in a great logo. There are many online logo development websites available but creating a logo tailored for a business with a professional graphic designer can be quick, easy, and cost efficient. It is built around a concept and strategy, includes different variations and will grow for the long-term with a business. A good logo creates synergy with business goals and is designed to last for generations.\nMishap #4 – Lack of Strategy\nNot having a branding strategy is probably one of the biggest mistakes an organization can make. A strategy provides a clear idea of what your organization stands for and how it can help customers, as well as visually define how a brand is presented to target markets. Not having a strategy creates a lot of ambiguity internally for employees as they work to promote the product or service, which ultimately affects the external messages and visuals that customers see. And, if customers are seeing mixed messages and visuals that creates uncertainty and confusion, which impacts the bottom line. Take the time to sit down and create a brand strategy that translates into brand guidelines that are used to execute the brand internally and externally.\nCreating a strong and timeless brand takes a lot of work and won’t necessarily happen overnight, but by being thoughtful and consistent in its application it will provide a return on investment that will position your business as a market leader for years to come.", "label": "No"}
+{"text": "Deliveries may be delayed due to the high number of new product orders.\nNatural easy beauty!\nLove the colours, found just the right shade for my skin. Spreads easily - I use it for an everyday natural look. If you like natural choose this!\nYour skin but better\nI've been struggling to find foundations that are a perfect shade match for me and has the finish that I like. Let's be real, most foundations in South Africa have a matte finish which I am not a fan of. I likd the finish of this foundation because It doesn't dry me out. However, it does have scent to it and it leaves my face slightly red after I've used it.\nCatrice BB Cream\nYou had me at 'vegan'. Smooth, easy to use, does not clog up the pores and works well with other products.\nNormally very skeptical of bb creams but this one definitely has a wonderful texture. Moisturizing and creamy... Doesn't cake or flake on your skin.\nthis formula is amazing. applies so nicely and gives off this natural look. and no cakiness which is always a winner for me", "label": "No"}
+{"text": "LEROY AND TOM\nDecember 12, 2019\nEverybody has a Christmas that stands out in their memory like dandruff on Superman’s cape! Mine was several years ago. Bah Humbug Bill, the cow buyer made a deal on a set of cows down below Snowville.\nLeroy, Tom and I were to go down, work’em and ship’em back home. Bah Humbug set it up for December 23. He, of course would not be able to be there to help.\nLeroy and Tom were both members...", "label": "No"}
+{"text": "|Case Tractors Discussion Forum|\nRe: 1660 pics/grain monitor ect\n[Show Entire Topic]\n[Show Entire Topic]\n[Return to Forum]\n[Log in to Reply]\nAdirindack case guy\nDam Bro, That ground around you has the ability to produce food and energy from the roots of the earth. We here have the same capabilities, HOWEVER, here we have way too many \"HAVEALOTTS\" definition, people who made a fortune years ago on Wall Street and moved here and want to look off their porch and see nothing but trees.\nEveryone here that has to make a living, other than a few family farms such as ours has to travel many miles to a job site to earn a decent wage, because thes HAVEALOTTS, don't want any small business in the area that might wake them up during their afternoon snooz.. Yet they think the Town Hwy. Dept. should pick up all their garbage and leaves.\nSorry for the Rant, These people think they can tell me what I can do in the town that I was born in! I'm just waighting for one of them to step onto my property and chalange me.\n|Fast Shipping! Most of our stocked parts ship within 24 hours (M-Th). Expedited shipping available, just call! Most prices for parts and manuals are below our competitors. Compare our super low shipping rates! We have the parts you need to repair your tractor. We are a company you can trust and have generous return policies. Shop Online Today or call our friendly sales staff toll free (800) 853-2651. [ About Us ]|\n| Copyright © 1997-2015 Yesterday's Tractor Co.|\nTRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor Headquarters", "label": "No"}
+{"text": "Mrs. Bella Pyle, Stanley's Pavilion Cinema, Bella religously, six years\nMrs. Bella Pyle cleaning the steps at Stanley's Pavilion Cinema which has been empty for the past six years. For a couple of hours each week Bella religously scrubs the marble steps leading to the paybox, then she dusts and polishes the foyer.\n|Color||Black & White|\n|Keywords||Core47,Char Women, Clothes,Bucket,Cleaning,1970s,Occupations,Core74,Women,Cleaner,Steps|\n|Credit||Mirrorpix / GIW Photos|\nThis photo license is intended for editorial use only. Single Use in context. For all advertising and other non-editorial uses contact the GIW office for further information.\nIf located in the United Kingdom of Great Britain, Northern Ireland and Eire, kindly contact Mirrorpix directly at email@example.com\nLicense Type: Rights Managed", "label": "No"}
+{"text": "Commission done by teh-evil-tigress from FurAffinity of my fursona Ein.\nThis is his true markings and form just as a feral. The notable difference being the silver pattern showing now in his fur has been revealed due to his wolf genes taking dominance, thus changing his appearance. He gained the accessories in his ears with claw earrings he collected from past rivals and the other earrings symbolizing \"dark luck\" which means to suffer through bad look to obtain good luck.\nEin (C) Me", "label": "No"}
+{"text": "K&L Email Alerts\nSign up to receive custom alerts, new arrivals and the latest happenings from K&L Wines\nStaff Favorites - Gary Westby\nGary Westby | Send Email | Subscribe to My Sommelier Service\nI started at K&L in February of 2000, after 4 years of working down the street for another retailer, and although I take care of the Champagne buying here at K&L, I love to drink wine from all over the world. I prize authenticity in wine, and love representative examples of many different styles, whether it is a spicy dry creek zinfandel or a mineral driven Manzanilla. I almost always drink my wine with food, and am drawn to food wines rather than the softer styles that are good for drinking on their own. My wife Cinnamon and I cook a lot of Italian & French food at home, and my list of wines reflects those food choices. I also love value, at every price point, and can't stand \"prestige\" labels that under deliver in the bottle. I love honest wines for the table. If you love good wine to go with your good cooking too, I think that by joining my personal Sommelier list you will be treated to a wide variety of wines that represent a strong value for money at what ever price range you feel comfortable with. Give it a try!\n|Page: << prev 11 12 13 next|\nNorth Shore Gin No. 6\nReview Date: 8-25-2009\nThis top-notch gin made was a fabulous partner to tonic last night. With a strong hint of rosemary and winter spice, I found it to be incredibly refreshing and all to easy too drink. It took a lot of self discipline to only have one! This is a must in the cabinet of any gin lover.\nLaunois \"Cuvée Reserve\" Brut Blanc de Blancs Champagne\nReview Date: 8-18-2009\nCinnamon and I paired this with some pork paté from the fatted calf in Napa before diving into some pork chops last night, and I was left wanting for nothing. This is a wine of depth, finesse and intrigue and yet is about as easy as it gets to drink without engaging the grey matter at all.\nBrouwerij De Ranke \"XX Bitter\" Belgian IPA 750ml\nReview Date: 8-12-2009\nThis extraordinarily drinkable Belgian IPA is from Wevelgem in West Flanders - and I have been drinking it to celebrate the spring classics in Flanders - particularly the Ghent-Wevelgem bike race. It has a straw/golden color and a bubble train that would make tête de cuvée Champagne blush. The picture is completed by a gorgeous head of Belgian lace that I could imagine floating a quarter on top of. Unlike the new world style of IPA, this robustly hoppy and refreshing ale has balance. Get some before I drink them all!\nLustau Almacenista \"José Luis Gonzalez Obregon 1/143\" Fino del Puerto\nReview Date: 8-11-2009\nOver the weekend we had a lovely Spanish themed dinner party, and served this great fino with Tapas in our backyard. We paired it with peppers that I had stuffed with a paprika aioli- tuna filling, smoked almonds, olives and oloroso mushrooms. This bone dry, full bodied fino went fantastically well with the food and showed off a salt air brininess as well as a haunting apple hint of fruit. When we sat down for the main course- paella heavy on the chorizo, the Obregon surprised me with its flexibility. Although its unyielding dryness might come as a shock to the uninitiated, fans of the best of the world of wine owe it to themselves to taste this example of affordable greatness.\nNorth Shore Gin No. 11\nReview Date: 7-30-2009\nDon't hesitate when you see this gin in stock, it is very small production and quite sought after. The last batch all sold before touching the shelf! The number 11 has a relaxed exoticism that reminds me of Hendricks, with a dry refreshing streak that only the Junipero can equal. The balance is fabulous, and combined with a lime from our dwarf tree, a glass full of ice and a splash of tonic, I was in after-work-cocktail heaven.\nElisabeth Goutorbe \"Cuvée Eclatante\" Brut Champagne\nReview Date: 6-11-2009\nThis is Champagne of masterful balance, and certainly defies its reasonable price with its elegance. Cinnamon and I shared this with her mother Margaret the night before last, and while it has the black cherry of Ay, it is not as powerful or obvious as most of the wines from that village. It ended up coming very close to our three person fridge to recycling bin record!\nTop Value! Drink from 2009 to 2012\nWarre's \"Otima\" 10-year-old Tawny Port (500ml)\nReview Date: 5-7-2009\nWe were honored by a visit from Dominic Symington, the Director of Warre on Tuesday, and this was one of many Ports that he poured for us. I was extremely impressed by this 10-year-old tawny, which he served quite cool. He explained that tawny, and other Ports for that matter, are often served far to warm in the US. At cellar temperature (around 55 degrees) this Port showed an amazing amount of depth, and even some tannic structure that is usually only found in vintage ports. This is a great way to end an evening, and will keep quite well after being opened.\nFranck Bonville Grand Cru Blanc de Blancs Champagne (1.5L)\nReview Date: 5-2-2009\nI always have to order extra of these magnums - Clyde & Trey always gobble up about half of what we get! All Champagne has an advantage in magnum, seeing more surface area for lees contact and half the amount of air exposure. Already exceptional out of 750, the Bonville Selection picks up both richness and zip in the larger format bottle - making it the \"smallest\" big bottle that we have. It ends up empty far too soon!\nArdbeg Uigeadail Traditional Strength Islay Single Malt Whisky\nReview Date: 5-1-2009\nI love Ardbeg, and the Uigeadail is one of the most special expressions that I have had from this great Islay distillery. No other distillery makes a malt quite as peaty as Ardbeg, and this one has an additional twist: sherry wood aging. The sherry wood gives another dimension of richness and weight to this typically light and piercing single malt. I have a bottle at home, and I love it for a cold night by the fire - but Alex Brisoux (the Redwood City store manager) swears by it with oysters! That is a combination that is hard for me to imagine, but I don't doubt a professional like Alex on a topic as serious as pairings!\nConiston Brewing Company \"Bluebird Bitter\" England 500ml\nReview Date: 4-17-2009\nThis hoppy bitter deserves the accolades it has received; which include the Campaign for Real Ale's \"Ale of the Year\" in 2008. Bright, refreshing bitterness, balanced by high quality but extraordinarily restrained maltiness and very low alcohol make this a true session beer - perfect for occasions when having a few more than one. This will be in my cellar (they suggest 58 degree serving temperature) from now on!\nHendrick's Scottish Gin 750ml\nReview Date: 3-27-2009\nScotland has more to offer than just great whisky... This gin is world class too! Cinnamon and I are both big fans of the old \"mother's ruin\" and always keep a variety on hand. Along with Fernet Branca and Rittenhouse Rye, this is one of the most repeated bottles of spirits in our liquor cabinet. This is a gentle style of gin, not extra proof or supercharged with juniper, yet it is could never be given the old put-down \"vodka lovers gin\"- it has far too much balanced flavor for that. The cucumber and rose petal elements in this fine spirit lend a cooling and subtly aromatic touch rather than being overt flavorings. I love it with tonic, and just the smallest corner of one of our homegrown Meyer lemons.\nSandeman 20-year-old Tawny Port\nReview Date: 3-25-2009\nThis is my top 20 year Tawny, and perhaps my favorite tawny in the store. It has a very pale amber color and a serious old solera nose. On the palate the Port is full bodied, with candied citrus and roasted, salted almond flavors. The perfectly balanced sweetness and long finish complete the package. This is a great tawny - at any age. I am looking forward to pairing it with a cheese course at my next dinner party, and Ligia from Sandeman showed us how well it works with milk chocolate as well!\nAnchor Junipero Gin 750ml\nReview Date: 3-14-2009\nFritz Maytag of Anchor Brewing fame is a hero of mine. Everything he is involved with, from Anchor Steam beer (my personal desert island beer) to his exceptional York Creek wines and his Protero distillations, are among the best in the world. I always blame my English heritage for my strong attraction to gin, but this all-American creation is certainly one of my favorites. While very light in body, this is strong stuff at nearly 100 proof, and has a huge amount of very clean juniper flavor. I love it with ice, lime and tonic, but it is also a fantastic martini gin.\nBaron Fuente \"Esprit\" Brut Champagne\nReview Date: 3-13-2009\nEric de Brisis from Champagne Baron Fuente just visited us (3/11/09) here at K&L, and we had a great time with him. We did tastings in both the San Francisco and Redwood City stores and had a lot of good customers come and taste. The star of the tasting was this Esprit. Not many Champagne houses make a non-vintage wine like this, with such a suave texture from long aging, and none at such a low price. This is elegant Champagne for sure; not at all austere, yet in no way sweet, a balanced and fine aperitif.\nFernet Branca 750ml\nReview Date: 3-5-2009\nFernet has a following that borders on a cult here at the K&L. The ultimate in \"acquired tastes\" this herbal digestif is rarely enjoyed by the imbiber the first time. But, in the wine business, we often times have meals that are a little bit bigger than normal, and need a little something to settle our stomachs, and nothing on the planet is better than Fernet. Cinnamon is an evangelical convert to this magic elixir, and having less than half of a bottle of it in our liquor cabinet is an emergency situation. We even have Fernet posters in our living room - no lie! Try this out the next time you need a little help settling your stomach after a big meal... You'll learn to love the herbal taste.\n|Page: << prev 11 12 13 next|", "label": "No"}
+{"text": "2. The right people will stay in your life. The wrong people will work their way out eventually.\n3. Never feel like you have to prove yourself to anyone. Just do your best and be your best, they will see.\n4. Always be kind, others are struggling too. Give back, even in the smallest of ways.\n5. Don't fight battles that won't matter tomorrow. Don't fight battles that aren't yours to fight.\n6. Sit outside next time it rains. Learn to feel it.\n7. Live as you want to, not as you're \"supposed\" to.\n8. Don't wait until the time is right. Do it right now.\n9. Cleanse your soul and clear your mind often.\n10. Admit mistakes and continue to learn.\n11. Don't make any big decisions when you're angry or hurt.\n12. Learn to say no without explanation.\n13. Take time to be alone.\n14. Go out and do things by yourself. It's liberating to know you can enjoy you.\n15. Keep some opinions to yourself. Don't be a dick.\n16. Don't try and fix others. If they don't fit in your life, walk away.\n17. Don't pretend your problems are bigger than anyone else's problems.\n18. Let yourself feel whatever the fuck you feel in that moment.\n19. Deal with your problems. Work it out. Then move on.\n20. Let yourself love. Let yourself live. Just be.", "label": "No"}
+{"text": "Duality is a Gift From The Universe — Tap Into It!\nCan we settle on a couple of points?\nThe sunlight is a blazing sphere of power that gas so many points on our earth – our food and also even ourselves. This is a truth.\nPositioning your feet on the ground can link you back to Environment and also help center you. Once again, a truth.\nDark chocolate is superior to milk delicious chocolate. Ehh … this might not be a fact relying on your tastebuds, yet we would certainly enjoy to believe that it’s true considering all the wellness advantages.\nYet seriously, one truth that most of us understand holds true is that we stay in a realm of duality, indicating that there are always two sides to whatever.\nThis fact can be confirmed with anything.\nConsider how a plant expands: there’s the lovely development that we see above ground, but also delicately intertwined roots that expand beneath the ground.\nConsider the sunlight and also the moon: one burns vibrantly in the day time skies while the other brightens our evening time.\nUltimately, consider exactly how you on your own exist in this world. You have two sides, also.\nThere are both sensible as well as psychological aspects of your nature. You have left and best sides of your brain. As well as every person has both manly and feminine energies.\nDid you know that you also have a sun sign and also a moon sign astrologically?\nLearning more about both sides of on your own from a sensible as well as emotional viewpoint can aid you to comprehend how to manifest the life that you truly want to live.\nOnce you encounter these facts, the globe is at your fingertips!\nUse Reasoning Using Ancient Scientific Tools Like Astrology\nThink it or not, astrology is based a lot more on science that’s backed by truths rather than necromancy.\nThis is a lot to ensure that a selection of old cultures have used it’s logical reasoning to in fact calculate schedules, determine massive choices when it came to war strategy, as well as also prepared their plants around astrological dates.\nAstrology makes use of a system that incorporates math and also astronomy to produce an intimate language that just a few comprehend on an extremely deep level.\nNot only do astrologists prepare graphes (similar to mathematical graphs), they also study specific aspects and also transits that integrate degrees (these can appear like geometric angles that you might have studied in mathematics class).\nTo come to be a fluent astrologer, you must devote to both making use of scientific research as well as math, however additionally take advantage of your instinct!\nIntegrating Psychological Intelligence To Open Your Spirit Course\nWhen people speak of instinct, there’s this false impression that just those that are feminine or female have access to this superpower.\nThat’s simply not true.\nEverybody can connect with their instinct and also should!\nAs high as our society teaches us to prevent emotions (whether you’re male or women), we should find out to unlearn these methods.\nThe feelings are essential to learning more about yourself on a much deeper, spiritual level. Actually, we would certainly go so far regarding state that emotions are how your soul speaks with you, however you need to educate on your own to listen.\nThe feelings that we all have accessibility to is in fact an advice system. So it is essential to actually experience each emotion so that you can be assisted to where you’re in fact intended to be.\nThis is exactly how you take advantage of your instinct.\nYes, it’s excellent to feel upset often. Yes, it’s excellent to really feel dissatisfied occasionally. Yes, it’s good to really feel unfortunate often. Yes, it’s remarkable to really feel passionate, as well!\nThese are all valid feelings that supply evidence and assistance regarding where your heart would like you to go and where your heart would not like you to go.\nWhen something makes you uneasy, that is your soul speaking to you, warning you that possibly that isn’t the path for you. While when something makes you fired up and full of energy, your spirit is exclaiming, “YES!” and motivating you to move forward.\nRecognizing the emotions is a vital enter entering your spiritual power as well as brightening your heart path.\nJust how To Make use of Both Reasoning as well as Feeling to Show Up the Life Your Spirit Truly Desires\nAs we pointed out above, we live in a world that is twin in a lot of methods.\nIt is essential to identify this to make sure that you can make the most of the devices and also sources that are around you along with tap into the all-natural capacities that you have within on your own.\nAstrology is one the earliest, most trusted devices that humanity has actually been able to utilize to comprehend the spirit’s objective by very first examining the Sunlight indication. The sun indication is your individual zodiac sign that actually outlines your one-of-a-kind attributes and also also highlights your emotional triggers and also exclamations.\nNot just can you use a clinical tool that’s filled with reasoning, but while exploring your individual astrology, you can additionally practice using your emotions.\nHow does the details provided to you make you feel?\nThe response is usually guaranteed as well as recharged to show up the life that your spirit is yearning for.>>> Click here to read your Personalized Soul Path Report right now.\nYou’ll be impressed at what you can achieve when you acknowledge as well as recognize your complicated, dual nature.\nThe concern is, are you prepared to tap into both your reasoning as well as feelings?\nThe moment is now!>>> Your Personalized Soul Path Report is waiting for you!", "label": "No"}
+{"text": "Let’s take a quick trip back to school.\nRemember that time you scored badly in a test?\nMaybe your teacher asked you to take the test again, and happy to get a second shot at this, you agreed. You took the test again but scored more or less the same.\nWhy? Well, here’s what you didn’t do:\n- Review your answers in the first test to see where you went wrong.\n- Get feedback from your teacher and ask for ways to improve.\n- Fix the fundamental gaps in your understanding.\nIf you draw the narrative of a sales call parallel to this school-time throwback story, you’ll find they have a lot in common. If you don’t come back to analyze your sales calls, how would you know what measures to take to improve your next call? You take multiple calls; your clients say different things on each call; they raise different objections, ask different questions, respond in many ways; some only have a few minutes, while others want to spend hours in discussion.\nNow, you might not be able to tackle all of those sales objections, answer your prospects’ questions, and keep your prospects engaged while on call - resulting in another lost lead. But to ensure that your next sales call goes better, you need to analyze these scenarios by referring to your sales call recordings. You need feedback from your sales manager, or sales training and coaching to develop better sales skills.\nSo, analyze your test paper (pre-recorded sales calls), ask your teacher for feedback (one on one with your sales manager), and do better the next time (get out in the field again).\nBy analyzing your sales conversations with a sales call coaching software (like Wingman),\n- You will know where you are lacking, what sales skills you need to work on, and if you need sales training or sales coaching.\n- You will be able to understand your prospect’s mindset - and learn how to establish product-prospect fit and pre-empt their objections\nData sources for sales call analytics:\nWhat isn’t measured isn’t managed.\nEnter sales intelligence.\nA sales intelligence tool analyzes your sales data based on the data you provide it, which should include: your sales call recordings, your CRM, integrated communication channels, and cloud platforms you need to integrate.\nA sales call coaching software leverages your sales data and conversational intelligence to deliver actionable insights and metrics. By tracking these sales metrics, you can:\n- Land more qualified leads and enhance your customer experience\n- Track your progress towards your goals, and course-correct when needed\n- Forecast future sales to inform many critical decisions and sales initiatives\n- Train, coach, and reward your high, medium, and low-performing reps in your sales team\nKey elements to monitor when analyzing your sales call\nCall duration: The longer the calls, the higher the win rate\nConsider the scenario of this sales call:\nMark: “Hi, this is Mark from Network Links. Is this a good time to talk?”\nJulie: “No, I am in a meeting right now.”\nMark: “Oh, okay, no worries, could you tell me what time suits you?”\nJulie: “I will call you back once I am free.”\nMark: “Sure, Julie. Talk to you soon!”\n(Call duration: 15 seconds)\nAnd now, give this script a good read:\nMark: “Hey Julie, I am Mark speaking from Network Links, and I think that you’re looking to buy a company-wide networking solution. We offer a vast product portfolio of robust network solutions. Did I catch you at a good time?”\nJulie: “Hi, yes, we are looking for a networking solution, but can I call you later?”\nMark: “Oh, that’s perfectly fine, Julie. I just wanted to tell you that x of your key competitors use our products and have driven an ROI of yy%. We also recently won the G2 award for xxx. This will just take a couple of minutes, and I could help you decide what solution would best fit your business.”\nJulie: “Umm, okay, go ahead.”\nMark: “That’s great, Julie. Could you please let me know what you are exactly looking for?”\nJulie: “Sure, so we are looking to…..”\n(Call duration: 40 seconds and counting..)\nA long call means a more value-driven conversation with the prospect. It clearly states that the sales rep was able to engage the lead with their sales skills; it involves sales objections and questions from the prospect - which is a good sign for a fruitful sales call.\nSo, when analyzing your sales conversations using sales call reporting, you should track this metric to recognize:\n- The sales reps that are performing well in keeping the prospect on-call, building rapport, and bringing out the value proposition of the product\n- The sales reps that get their calls hung up in just a few seconds. This can bring the need to be trained and coached for improving their sales skills to increase their sales call duration.\nTalk / listen ratio: Let the lead speak\nBack here with another sales call script to let you judge for yourself.\nWhere the sales rep talks more:\nMark: “I have gone through the essential features. Would you like to know more about our product?”\nJulie: “Umm, I think I’m good for now.”\nMark: “Okay, I’ll just add that our product would be a great addition to your business software stack. If you have any questions, feel free to ask me.”\nJulie: “Nothing, for now, Mark. I’ll get back to you. Thanks, bye!”\n(Talk / listen ratio: 75:25)\nWhere the lead does all the talking:\nMark: “So what’s your biggest pain point in following up leads?.”\nJulie: “Hmm. Basically I want to fire a follow-up email to leads who have seen my first sales email and yet haven’t replied. Is there an option to automate that follow-up?”\nMark: “Absolutely. This is possible through our email automation system integrated into our platform. Is there anything specific you want from this feature? ”\nJulie: “Okay, and can I schedule multiple emails at the same time? For example, right now, I cannot keep track of who has opened my email and who hasn’t, let alone respond to all my leads in time. So, can I automate and schedule all the emails, such as one email for all those who have booked their seat in an event through our first mail, and the other one to those who haven’t responded?”\n(Talk / listen ratio: 25:75)\nIn the first scenario, the lead is not very interested in the product, and the sales rep is talking for 75% of the time. Even so, the call doesn’t end on a positive note. And we all know what an “I’ll get back to you” from a lead means (sigh!).\nIn the second scenario, however, the talk / listen ratio of 25:75 gives us great insights into how productive the call went. Julie is quite interested in the product, and Mark is speaking just enough and stopping whenever he feels that Julie has more to say. For a good talk / listen ratio:\n- Start with a brief introduction and establish your reputed place in the market.\n- Bring out your value proposition while building rapport and engaging with your lead.\n- Take pauses when needed, speak less and be on-point.\n- Let your lead lead your sales call.\nSo, do track this important sales metric while going through actionable sales insights using your sales call coaching software.\nCompetitor mentions: an opportunity to seize the day\nYeah, competitor mentions are good, actually! Because they give you the opportunity to establish credibility and can also inspire fear of missing out. This is how a good salesman would respond to a competitor mention:\nJulie: “I already have a vendor.”\nMark: “Oh, that’s good to know. MarketingHub is a great company. Some of our customers have used their product, and they have found that our product makes marketing automation much easier. They were really surprised how our software could allow for location-based personalization. Does your current vendor provide that?”\nSee how Mark grabbed this opportunity to tell his lead more about their product’s value while inspiring a little bit of competitiveness. These competitor mentions are one of the most important sales elements to track through sales call reporting; this is why:\n- You will know who your key competitors are and have battlecards ready to establish your unique value props.\n- It gives you the required information to tweak your own solution plans and price structures, upgrade your product features, or improve your marketing and advertising strategies to get ahead of the competition.\n- It guides your way through future sales calls as you can anticipate the competitor-related objection in advance now.\nCustomer pain points: be your prospect’s therapist\nAccording to a report by Salesforce, 85% of prospects and customers are dissatisfied with their on-the-phone experience. On the other hand, you’d be surprised to know that 75% of prospects are willing to make an appointment or attend an event based on a cold call alone. The overwhelming overlap of these two statistics hints that your prospects want to be heard, but the sales teams often fail to build rapport and establish value.\nHowever, if you are a good salesperson, you’ll be able to lend a friendly ear to your prospects and identify their pain points as they open up to you. A customer sharing pain points is a green flag: they trust you enough to consider you can fix those problems. Use your sales intelligence tool to mine those opportunities!\nObjections raised: the more the merrier\nDo objections terrify you? They shouldn’t. When your lead raises an objection as you are pitching to them, they actually want to know more about your product and give you the opportunity to prove its worth.\nYour leads might raise objections like:\n“I don’t have the budget.”\n“I already have a vendor.”\n“We’ll get back to you.”\n“Your competitor is cheaper / better.”\n“I need to talk to management.”\n“I don’t really need your solution.”\n“I’ve never heard of you.”\nYou can use smart sales objection handling scripts to tackle those and utilize this opportunity to close the deal!\nRemember, the more objections your prospects raise, the more insights you get into what bugs them and how you should establish your product value with a problem-solution approach.\nTo actualize these measures, you need your sales data and intelligence to come together and deliver actionable insights. This is where Wingman comes to your rescue. Our sales call coaching software is driven by sales intelligence to enable sales analytics for you. But we understand that you don’t need just a sales software, you need critical metrics and pivotal moments in your sales calls presented to you on a hot plate!\nHere’s how Wingman analyzes your call transcript and automates sales call reporting to give you the metrics that matter:\nWith Wingman’s sales call reporting features, you can automatically track critical metrics such as talk / listen ratio, moments of hesitation, sales objections, call duration, and longest monologues - in real-time.\nLet Wingman show you the right path to intelligent sales analytics. Now that you know what to look for when analyzing your sales calls, fire up your sales call coaching software to get the insights you need!", "label": "No"}
+{"text": "Originally Posted by tommydiezelm3\ni called they have nothing in stockkk!!! only the gts!!! GRRRRR i need somehting nowww!!\nI'm not surprised to hear that at all! Vivid is located not too far from me. Every time I've called for an item, they've never had it on-hand. After a visit to their shop, it's readily apparent that they carry near zero inventory. By far, most of their business requires placing an order. That's not very helpful when buyers have money in hand!", "label": "No"}
+{"text": "A MODEL was left “creeped down” after she was used by a catfish photos to superimpose their face onto her human body.\nAmber Phillips, from London, unveiled she was indeed targeted into the strange scam by somebody utilising the pictures on dating website Hinge.\nInfluencer Amber, who’s 130,000 supporters on Twitter, posted online on Thursday describing just exactly how she was alerted towards the catfish by an admirer whom spotted the uncanny resemblance.\nThe person whom got in contact delivered her a note which checks out: “Sorry this is certainly therefore random, but therefore creepy. We talked to a lady on Hinge for the while and I’ve for ages been good at spotting catfish.\n“ But f*** hell some body has really photoshopped your pictures also it creeped me personally the f* away.\n“I implemented you currently and somehow realized that your image fits her.”\nThe image shows a blond girl named “Ellie” posing in a grey underwear set.\nNonetheless, a graphic from Amber’s account reveals the brunette beauty within the precise pose that is same ensemble, using the catfish having superimposed their particular face along with Amber’s.\nAmber’s tweet, that was captioned:” How creepy, exactly exactly exactly exactly what the f***”, has since gone viral and horrified social networking users.\n@whosHammsisthis said: “Swiping the next pic over upright made me leap. That’s some human anatomy snatcher face stealing s***.”Continue reading “Catfish superimposes face onto model’s human human body on dating internet site – Viral News UK”", "label": "No"}
+{"text": "I get an \"invalid pointer\" runtime error when I open up simple tools in my toolbox. Any suggestions for a way to fix this?\nNot without details on the toolbox and the tools. Did it every work? Do they work on another computer? Is it a convention toolbox (*.tbx) or a python toolbox (*.pty) anything you think might help\nIt used to work. Just regular toolbox. The tools actually execute mostly, however sometimes an input field won't show, or table fields aren't selectable. It does not matter the tool either, could be 'append' or 'xy to line'. I only have 10.2.2 installed on this machine and switching \"users\" does not change the result.", "label": "No"}
+{"text": "Beginning March 8, as part of a new \"Faster Connections\" NYC Ferry pilot program, commuters will be able to travel from Bay Ridge in Brooklyn to Wall Street in Manhattan in just about 20 minutes between 6:15am and 10:15am on weekdays.\n\"Starting Wednesday, March 8, no morning commuter will make more than two stops before getting to Lower Manhattan on the South Brooklyn route,\" reads the program's website. Woohoo!\nAccording to officials, the service is being tested on this specific route because it currently boasts the longest average commuter travel time in the city.\nCrain's also reports that the project will not cost the ferry system any additional money—always good news.\nThe development follows Mayor Eric Adams' unveling of the NYC Ferry Discount Program just last summer, when he announced officials' intention to introduce low-income New Yorkers to the transportation option. Starting this past fall, folks 65 and older, people with disabilities and low-income riders qualify for $1.35 rides, down from the previous price of $2.75.\nBack then, the politician explained that most New Yorkers can now buy a 10-ticket pass for $27.50 while the city also officially lifted the $1 bike fee on ferry passes.\nYou can consult the new schedule for the \"Faster Connections\" pilot program right here and you might, perhaps, even start getting used to it. According to officials, there is no set end date for the try out but you can expect the service to be evaluated based on ridership, on-time performance and rider satisfaction later this year.", "label": "No"}
+{"text": "Colorado Materials, Inc, family owned and operated since 1999, is a landscape supply company offering boulders, decorative rock, stone, mulches, soils, composts .\nThe super-fine crusher generated higher liberated magnetite minerals in the – 300 + 212 µm and 45 µm size fractions compared to rod mill Both comminution devices generated large low-grade hematite and goethite middlings However, the rod mill produced higher locked/unliberated hematite and goethite compared to that of the super-fine crusher\nSmaller particles make heating processes more cost-effective and energy-efficient, making Haarslev Fine Crushers a valuable addition to processing lines that focus on operating costs The rugged, reliable Haarslev Fine Crusher cuts down pre-broken meat and poultry by-products to particle sizes of 13 mm, with throughputs of as much as 18 tons/hour\nNew fine crusher is a new type of fine crushing and rough milling machine which is designed and manufactured on the basis of the main technical parameters of the domestic compound crusher and impact crusher This machine is widely applied in the area of sand making and fine crushing which is a suitable fine crusher for medium-sized cement plant\nBuildology supplies Albuquerque and the surrounding regions of New Mexico with an extensive range of construction aggregates, gravel, and crushed stone for your landscape projects Whether you are looking for aggregates to cover your garden pathway, a driveway or walkway, we have the right material for you!\nCrusher fines are typically ¼” minus and are ideal for walkways, driveways or even for a clean, minimalist ground cover look They hold up well to foot traffic and because they’re so small, create a solid, flat surface that prevents slips and trips “True Crusher” fines, like Amaretto brown and Blue Sais, are ideal for driveways .\nWhat You Need to Know About Building Trails with Crusher Fin Finely crushed compacted rock is a popular trail surface improvement throughout America A crusher fine trail combines the rustic feeling of a natural surface trail with a surface type that's durable (but not concrete or asphalt)\nThe 9 Best Types of Gravel for Your Driveway , crusher run typically includes a higher percentage of stone dust fin As the gravel settles, the dust seeps into the spaces between the gravel .\nSep 01, 2015· Video and animation produced by Solid Edge Technology for Crush Force, demonstrating the technical details of their cone crusher\nType in inches and feet of your project and calculate the estimated amount of Sand / Screenings in cubic yards, cubic feet and Tons, that your need for your project The Density of Crusher Run: 2,410 lb/yd³ or 121 t/yd³ or 08 yd³/t\nFine crushing with cone crushers Due to their design, cone crushers are generally a more expensive investment than impactors are However, when correctly used, a cone crusher offers lower operating costs than a conventional impact crusher Therefore, clients crushing hard or abrasive materials are advised to install cone crushers for the final .\nRoll Crushers are one of the most widely used crushers in the mining industry and have numerous advantages, such as high capacity, low headroom, low horsepower, the ability to handle wet, sticky feeds and the generation of minimum fines while producing a cubical product\nEzy Dose Pill Crusher with Storage , Now I can grind them up without threatening the life of the crusher I don't get a fine powder, but they're ground enough to stir into her food It crushes \"normal\" pills and tablets to the powder you'd expect Read more 2 people found this helpful\nThe latest fine crusher equipped with a hydraulic device can be very convenient to maintain, save time cost 2 Jaw crushing type Jaw crusher, is the first choice for primary crushing equipment, with large crushing ratio, uniform product size, simple structure, the ,\nFines definition is - finely crushed or powdered material (such as ore); also : very small particles in a mixture of various siz\nHigh-efficiency Fine Crusher is designed by our engineers based on introducing advanced technology on this field and combining with different working conditions of international cement industry, mining, beneficiation, building material and so on\nFine Crushers are widely used in the fine crushing of granite, basalt, limestone, pebble, cement clinker, quartz, iron ore and bauxite and having earned obvious economical benefit\nAug 31, 2018· The super-fine crusher generated higher liberated magnetite minerals in the – 300 + 212 µm and < 45 µm size fractions compared to rod mill Both comminution devices generated large low-grade hematite and goethite middlings However, the rod mill produced higher locked/unliberated hematite and goethite compared to that of the super-fine crusher\nOne of the items used in many areas within commercial and residential landscaping applications are crusher fin Crusher fines are typically quarter-inch or smaller aggregates that are used for walking and driving surfaces or clean desert areas where a very minimalist design is required\nThe introduction of a new machine for fine crushing, or The Blake multiple-jaw crusher, which, in combination with the ordinary Blake breaker, could be used in the reduction of ores or any hard and brittle substance to almost any degree of finenessHow can you use a jaw crusher to crush fine enough to feed a ,\nFine crusher has a very simple structure that’s why it can be maintained easily It is most commonly used for the construction of airport, metallurgy, bridges, roads, highways etc Fine crusher Roller Crusher It is a portable crushing machine Roller crusher is classified further depending upon the quantity needed\nthis is supposed to be the \"Ultra Fine Cut N' Crush\" / \"ULTRA FINE GRINDING - Pill crusher grinds pills and tablets into an ultra fine powder\" I bought over the cheaper crusher of the same manufacturer, because of the advertised fine grinding however, the powder simply remains stuck in the \"teeth\" of the crusher product after grinding it this .\nNew fine crusher is a new type of fine crushing and rough milling machine which is designed and manufactured on the basis of the main technical parameters, Hammer Crusher Hammer crusher crushes materials by the high-speed rotating of the hammer and the collision of the materials’surface lt features simple structure,\nCRUSHER SELECTION QUICK GUIDE PLAN YOUR OUTPUT You can only choose the right crusher if you know exactly what you want to achieve overall profitability depends on the balance between fractions and fin\nThe cone crusher, was designed primarily with a view to achieving top performance in the field of fine-reduction crushingIt has also been adapted to what is designated simply as “fine-crushing,” which extends into a range below that ordinarily defined by the term “fine-reduction”\nHigh-efficiency Fine Crusher [ Capacity ]: 20–270 t/h [ Applicable Material ]: It is mainly used for fine crushing of dinas, sand making, and for crushing in cement factory, etc\nPCX Series High Efficient Hammer Fine Crusher, also be called as Impact High Efficiency Fine Crusher, is suitable for crushing limestone, marlstone, etc, of which the crushing compressive strength does not exceed 200MPa\nCrusher Fines (Breeze) $1995 per ton Crusher Fines (Breeze) is used for walking paths, horse stall, pen arena and roundpen footing, foundation drainage It has many landscaping uses such as flagstone and paver base Equine Crusher Fines is the same material as regular crusher fines, however it is used more for horse stalls, paddocks and corrals\nThe high efficient fine crusher as a new fine crusher has a wide range of applications with the advanced international technology It is the most effective and reliable crushing machine at present which is applied to do fine crushing and medium crushing in fields of grinding materials, refractory materials, cement, silica sand and steel shot .\nWe have set up a team with hundreds of technical engineers to resolve a series of problems during project consultation, on-site surveys, sample analysis, program design, installation, commissioning and maintenance guidance.", "label": "No"}
+{"text": "Home › Forums › Powder Coating › Powder Coating Archives › powder club still not showing up at checkout?\nAre you guys taking it off later? Its only the 2nd order since joining it, so I’m not sure how you are working it.\nOrder Confirmation Number: E0164028\nComments are closed\nSign up now to receive exclusive email deals, industry news, and new product releases.*", "label": "No"}
+{"text": "Imagine if you could obtain a Golden Visa, granting you the opportunity to live and work in a new and exciting country. It may sound like a dream come true, but have you ever wondered what would happen if that visa were to be revoked? In this article, we will explore the possibility of the Golden Visa being taken away, and the potential implications it may have for those who hold this coveted status. Find out whether your newfound freedom could ever be in jeopardy.\n- Understanding the Golden Visa\n- Criteria for Obtaining a Golden Visa\n- Possible Reasons for Revocation of the Golden Visa\n- The Process of Golden Visa Revocation\n- Legal Consequences of Golden Visa Revocation\n- Preventive Measures to Avoid Golden Visa Revocation\n- Case Studies on Golden Visa Revocations\n- Reapplication after a Golden Visa Revocation\n- Future Implications of Golden Visa Revocations\n- Conclusion on Golden Visa Revocations\nUnderstanding the Golden Visa\nDefinition of Golden Visa\nThe Golden Visa refers to a special type of residence permit that grants individuals the right to live and work in a foreign country, offering a pathway to citizenship or a long-term residency. It is often accompanied by various lucrative benefits, making it an attractive option for investors looking to take advantage of the opportunities available in a new country.\nCountries offering the Golden Visa\nSeveral countries around the world offer the Golden Visa program, attracting investors with their unique set of benefits and requirements. Some popular destinations for obtaining a Golden Visa include Portugal, Spain, Greece, Malta, Cyprus, and the United States. Each country has its own specific regulations and criteria for granting a Golden Visa, making it crucial for potential investors to thoroughly research and understand the offerings of each jurisdiction.\nBenefits of the Golden Visa\nThe Golden Visa program provides numerous advantages to investors. These benefits vary depending on the country, but commonly include access to better healthcare and education systems, the ability to live and work in a new country, favorable tax schemes, potential citizenship or long-term residency options, and the opportunity to expand businesses and investments globally. The Golden Visa offers individuals and their families a chance to explore new cultures, diversify their investment portfolios, and secure a better future for themselves.\nCriteria for Obtaining a Golden Visa\nTo obtain a Golden Visa, investors are required to go through an application process that typically involves submitting various documents and fulfilling specific criteria. The process may vary from country to country, but generally requires investors to provide information on their personal background, investment plans, and financial capabilities. It is essential for applicants to carefully follow the guidelines and instructions provided by the immigration authorities to ensure a smooth and successful application.\nWhen applying for a Golden Visa, investors are typically required to provide a set of documents that support their eligibility. These documents may include a valid passport, proof of sufficient funds, a clean criminal record certificate, health insurance coverage, proof of investment or property purchase, and any other documentation specified by the immigration authorities. It is important to ensure that all documents are accurate, complete, and properly authenticated to avoid delays or complications in the application process.\nInvestment requirements play a crucial role in obtaining a Golden Visa. Different countries have their own investment options and minimum investment thresholds that applicants must meet. These investments can include real estate purchases, business investments, government bonds, or venture capital funds. It is essential for investors to carefully evaluate the investment options available and choose the one that best aligns with their goals and financial capabilities.\nRequirements on residency\nTo retain the Golden Visa, investors are typically required to meet certain residency requirements. These requirements may include minimum stays in the country, renewal of permits, or establishment of a business or investment presence. It is important to be aware of these obligations and ensure compliance to avoid the risk of visa revocation.\nPossible Reasons for Revocation of the Golden Visa\nBreaching terms and conditions\nOne of the most significant reasons for the revocation of a Golden Visa is the breach of the terms and conditions outlined by the immigration authorities. This can include not fulfilling the investment requirements, violating regulations related to residency obligations, or engaging in activities that are deemed illegal or unethical. It is crucial for Golden Visa holders to carefully adhere to the guidelines set by the immigration authorities to maintain their visa status.\nEngaging in criminal activities is a grave offense that can lead to the revocation of a Golden Visa. Any involvement in illegal activities, such as money laundering, drug trafficking, or terrorism, can result in immediate cancellation of the visa. It is essential for Golden Visa holders to maintain a clean record and abide by the laws of the host country to avoid jeopardizing their visa status.\nFalse or misleading information in application\nProviding false or misleading information during the application process is another reason for Golden Visa revocation. If it is discovered that an applicant has misrepresented their personal or financial information in order to obtain the visa, the immigration authorities may take swift action to revoke the visa. It is crucial to be truthful and transparent throughout the entire application process to ensure the integrity of the Golden Visa.\nFailure to meet residency requirements\nGolden Visa holders are obligated to fulfill certain residency requirements as stipulated by the immigration authorities. Failure to meet these requirements, such as not spending the minimum required time in the country or not renewing the permits within the specified time frame, can result in the revocation of the visa. It is important for Golden Visa holders to stay informed about their obligations and fulfill them diligently to maintain their visa status.\nThe Process of Golden Visa Revocation\nDuration and stages of the process\nThe process of Golden Visa revocation varies from country to country, but generally involves several stages. Initially, the immigration authorities notify the visa holder of their intention to revoke the visa and provide them with an opportunity to respond and defend their case. This is followed by a thorough investigation into the alleged violation, during which the visa holder may be required to provide additional documentation or attend interviews. Finally, a decision is made regarding the revocation, and the visa holder is informed of the outcome.\nLegal rights of the visa holder\nDuring the process of Golden Visa revocation, the visa holder has certain legal rights that should be upheld. These rights may include the right to be heard, the right to have legal representation, and the right to review and respond to any evidence presented against them. It is important for the visa holder to exercise their rights and actively participate in the revocation process to ensure a fair and unbiased decision.\nIn most cases, Golden Visa holders have the right to appeal the decision to revoke their visa. The appeals process typically involves submitting a formal appeal to an administrative or judicial body within a specified timeframe. The appellate authority will review the case, consider any new evidence or arguments presented, and make a decision on whether to uphold or overturn the revocation. It is crucial for visa holders to fully understand the appeals process and seek legal guidance to strengthen their case.\nLegal Consequences of Golden Visa Revocation\nOne of the most immediate legal consequences of having a Golden Visa revoked is the potential risk of deportation. If the visa is revoked, the individual may be required to leave the host country within a specific timeframe. Failure to comply with the deportation order can lead to further legal consequences and may affect future visa applications or travel plans. It is essential for individuals facing visa revocation to carefully consider their options and take the necessary steps to comply with the immigration authorities.\nThe revocation of a Golden Visa can also result in significant financial losses for the visa holder. This may include the loss of the investment made to obtain the visa, as well as any associated costs such as legal fees, property ownership expenses, or relocation expenses. It is important for investors to be aware of the potential financial risks involved in obtaining a Golden Visa and to carefully evaluate their investment decisions to mitigate these risks.\nImpact on family members\nGolden Visa revocation can have far-reaching implications for family members who are dependent on the visa holder. In some cases, the revocation may extend to family members, resulting in the loss of their residency rights as well. This can disrupt family life, education, career opportunities, and overall quality of life. It is crucial for visa holders to consider the impact on their family members when making decisions related to their visa status.\nDifficulty in obtaining future visas\nHaving a Golden Visa revoked can significantly impact the ability to obtain future visas or immigration benefits in other countries. The revocation becomes part of the individual’s immigration record, which is often taken into consideration by immigration authorities when assessing future applications. It is important for individuals who have had their Golden Visa revoked to understand the potential challenges they may face when applying for visas in the future and to seek legal advice to navigate the complexities of immigration processes.\nPreventive Measures to Avoid Golden Visa Revocation\nMaintaining compliance with visa conditions\nThe best way to avoid Golden Visa revocation is to strictly adhere to the visa conditions and obligations. This includes fulfilling investment requirements, complying with residency obligations, and avoiding any illegal or unethical activities. Regularly reviewing and understanding the terms and conditions of the visa, as well as staying updated on any changes in regulations, can help visa holders maintain compliance and avoid potential revocation.\nRegular monitoring of legal changes\nLaws and regulations governing Golden Visas may change over time, and it is crucial for visa holders to stay informed about these changes. Regularly monitoring updates in immigration policies, residency requirements, and investment regulations can help individuals make informed decisions and remain in full compliance with the visa conditions. Engaging with immigration professionals or legal advisors who specialize in Golden Visa programs can be beneficial in navigating the evolving landscape and ensuring ongoing compliance.\nSeeking legal advice\nGolden Visa holders facing any issues or concerns regarding their visa status should seek legal advice from professionals experienced in immigration law. Legal advisors can provide guidance on the specific regulations and procedures, assist in navigating the revocation process, and help visa holders protect their legal rights. It is important to engage with reputable legal experts early on to address any potential issues and make informed decisions to safeguard the Golden Visa.\nCase Studies on Golden Visa Revocations\nCases where Golden Visa got revoked\nNumerous cases of Golden Visa revocations have been reported worldwide. These cases often involve individuals who have failed to meet the investment requirements, breached residency obligations, or engaged in criminal activities. Each case is unique and depends on the specific circumstances and regulations of the country offering the Golden Visa. It is essential for potential investors to review these case studies and learn from the mistakes made by others to avoid similar pitfalls.\nLegal battles and outcomes\nSome Golden Visa revocations have resulted in legal battles between the visa holder and the immigration authorities. These legal battles often revolve around the interpretation of the visa conditions, the assessment of evidence, and the fairness of the revocation process. The outcomes of these legal battles can vary, but they provide valuable insights into the legal options available to visa holders and the potential challenges they may face.\nThe case studies and legal battles surrounding Golden Visa revocations have highlighted several key lessons. One of the most important lessons is the need for thorough research and understanding of the visa requirements and obligations before making any investment decisions. It is also crucial to maintain compliance with the visa conditions and to seek legal advice at the earliest sign of any potential issues or concerns. Learning from the experiences of others can help potential investors make informed decisions and improve their chances of maintaining their Golden Visa status.\nReapplication after a Golden Visa Revocation\nRequirements for reapplication\nAfter having a Golden Visa revoked, individuals may have the opportunity to reapply for the visa in the future. The requirements for reapplication vary depending on the specific circumstances and the regulations of the country offering the Golden Visa. In general, visa holders will need to rectify the issues that led to the revocation, demonstrate compliance with the visa conditions, and provide any additional documents or evidence as required by the immigration authorities. It is essential to thoroughly review the reapplication requirements and seek legal guidance to strengthen the case for approval.\nChallenges and obstacles in reapplication\nReapplying for a Golden Visa after revocation can present various challenges and obstacles. The immigration authorities may view the previous revocation as a negative factor, which can impact the outcome of the reapplication. Additionally, rectifying the issues that led to the revocation and rebuilding trust with the immigration authorities can be a complex and time-consuming process. It is crucial for individuals facing reapplication to address the challenges and obstacles proactively and seek professional assistance to maximize their chances of success.\nSuccessful reapplication stories\nWhile reapplying for a Golden Visa after revocation is challenging, there have been successful stories of individuals who have been able to regain their visa status. These success stories often involve individuals who have rectified the issues that led to the revocation, provided compelling evidence of compliance and eligibility, and demonstrated their commitment to fulfilling the visa conditions. These cases highlight the importance of perseverance, thorough preparation, and seeking professional assistance to overcome the challenges of reapplication.\nFuture Implications of Golden Visa Revocations\nImpact on prestige of Golden Visa\nGolden Visa revocations can erode the prestige associated with these programs, potentially discouraging future investors. The reputation of a Golden Visa program can be influenced by the number of revocations and the reasons behind them. Governments and immigration authorities may take steps to strengthen the integrity of the programs, instill investor confidence, and maintain the prestige of the Golden Visa by implementing stricter regulations and ensuring transparent processes.\nPotential changes to visa policies\nGolden Visa revocations can prompt governments and immigration authorities to reevaluate their visa policies and make adjustments to prevent future revocations. These changes may involve stricter due diligence processes, increased monitoring of visa holders, or imposing additional conditions and obligations. It is important for potential investors and current Golden Visa holders to stay updated on any policy changes and adjust their strategies accordingly to maintain their visa status.\nForecast on the number of revocations\nForecasting the exact number of Golden Visa revocations is challenging due to the dynamic nature of these programs and the multitude of factors involved. However, it is expected that revocations may increase in the future as immigration authorities strengthen their monitoring and enforcement mechanisms. The consistent growth in the popularity of Golden Visa programs may also contribute to a higher number of revocations, simply due to the larger pool of visa holders. It is imperative for investors to be aware of this potential risk and take necessary precautions to mitigate it.\nConclusion on Golden Visa Revocations\nSummary of main points\nGolden Visa revocation can have severe consequences, including deportation, financial losses, and difficulties in obtaining future visas. To avoid revocation, it is essential to maintain compliance with visa conditions, regularly monitor legal changes, and seek legal advice when needed. Case studies have illustrated the importance of thorough research, adherence to visa obligations, and learning from others’ experiences. Reapplying after revocation can be challenging, but success stories demonstrate the potential for redemption. The future of Golden Visa revocations may impact the prestige of these programs and lead to policy changes.\nImplications for potential investors\nPotential investors considering the Golden Visa program must be aware of the potential risks and consequences of visa revocation before making any investment decisions. Thorough research, understanding of visa requirements, and compliance with the terms and conditions are crucial to maintaining the visa status. Seeking professional advice and staying informed about legal changes can help investors navigate the complexities and make informed decisions.\nRecommendations for current Golden Visa holders\nCurrent Golden Visa holders should make every effort to maintain compliance with the visa conditions and obligations to safeguard their status. Regularly reviewing and understanding visa requirements, seeking legal advice when needed, and staying informed about legal changes can help in preventing revocations. It is also recommended to maintain open communication with immigration authorities, promptly address any concerns or issues, and actively participate in the revocation process if necessary.", "label": "No"}
+{"text": "This gallery displays a wide range of work by member artists, including ceramics, glass, jewelry, photography, textiles, sculpture, paintings and other fine art. They attract first class member artists, with fresh, unusual, distinctive work of the highest quality. Volunteering opportunities include helping to put up and take down monthly shows (rearrange inventory, move display pedestals or walls, paint walls, create signage, etc.), provide temporary gallery staffing, front sales counter, put on a workshop or demonstration, participate in juries or do general gallery maintenance.\nAddress1652 Shattuck Ave\nVisit Google Maps for this Address\nPhone: 510-843-2527 or email: email@example.com", "label": "No"}
+{"text": "As part of our ongoing 50th Anniversary celebration, we are introducing our Golden Anniversary Cash Raffle! For a $50 donation, you have a chance to win the Grand Prize of $10,000. Only 1,000 tickets will be sold. The drawing will be held at the Brentwood office on Friday, December 3rd. Thank you!\nShare This Form", "label": "No"}
+{"text": "Yeah, really. I know. The nerve!\nAnyway, Nancy was very quick, and started saving the boxes and bags of beads from the dumpster. Until the bead haters came back and yelled at her to get out of the dumpster (hater!!) She managed to free quite a variety of beads. She said they're mostly plastic, vintage and she has LOTS of them. She kindly sent me a box full of them. Of course, I don't know what I'm going to do with them, but we'll figure that out another time. Check 'em out:", "label": "No"}
+{"text": "Keep ingredients fresh, chilled, and within reach while creating those sandwiches that bring everyone in the door.\nIncrease the speed and efficiency of food prep in your operation with Continental Refrigerator Sandwich Units.\nChoose the configuration and size that works best for your operation, then start planning for more streamlined menu turns. All units feature an exterior, rear-mounted electronic controller with a digital temperature display. Sandwich units range from 27” to 72” widths to fit any kitchen layout, offer three different top styles and several configurations to meet your exact needs.\nOnce you have determined the size that will work best for your operation, it’s time to choose the top style that best meets your needs.\nTop styles include the Standard Top, which has two rows of pans and a 12” deep cutting board, a Mighty Top with three rows of pans and an 8” deep cutting board, and Cutting Top with two rows of pans, and a 19” deep cutting board.\nThe best way to determine if you need two rows of pans on the top or three rows of pans is to make a list of the ingredients you will need for the menu items you will be prepping.\nThe next decision comes down to preference. Do you prefer to have doors on the bottom for your refrigerated storage area, drawers, or a combination of both? Doors mimic a reach-in refrigerator style with shelves that accommodate a variety of refrigerated ingredients and condiments. Refrigerated drawers are great for storing additional pans.\nThese units are built to perform in the busiest kitchens with high-quality construction and environmentally friendly refrigeration. On top of all that, you have the added benefit of versatility. If Continental Refrigerator had a middle name, it would be Flexibility. They offer several options and features that can be changed in the field at any time.", "label": "No"}
+{"text": "At last, the much-awaited sandbox mode of League of Legends is going live soon. It has been called by its game developer, Riot Games, as the Practice Tool. Apparently, it serves as a device to train gamers on how the video game's latest features or functions are used. If that is true, then this tool will enhance the players' gaming experience.\nThe Practice Tool Will Not Work On Older Version\nGamers can only access this tool by downloading the new Legacy client since it is not designed to work on the older version. They need to go to Training, and then click the Practice Tool button in order to access this tool. This is a surprise move for Riot Games since about a year ago it has no intention of releasing the Practice Tool for League of Legends.\nThe Release Of The Practice Tool Was Confirmed\nRiot Games confirmed the release of the Practice Tool in the game's website. It has also revealed some details about of its plans for the League of Legends tool. Apparently, the game developer is intent on including teleportation, turret immunity, cool down resets, training dummies and many more.\nPlayers Can Only Play With Dummies\nAt this time, a player cannot include other gamers in this game mode. And it appears this will remain even if the tool goes live. This is disappointing to some avid gamers of League of Legends since it is a game pitting one team against another. With this tool, they have to play with dummies.\nThese dummies are the Practice Tool's only assets that will record a player's DPS in League of Legends. They will also indicate the amount of damage the player has done overall, as well as the amount of damage achieved by every attack. But these dummies have 100 magic resist as well as 100 armor. That means, the total damage a player did will not be the same amount of damage he can do in-game.\nNo Exact Date Was Announced\nRiot Games has not yet announced the exact date the Practice Tool of League of Legends will go live. But players can expect it to be released in a couple of weeks. Furthermore, gamers can expect that this tool may undergo some changes before it is released since this is the nature of PBEs.", "label": "No"}
+{"text": "Save the products you like here\nItem Added to Your Cart\nMore options for you to explore :\nYour Bag ( Items)\nCart Subtotal: Rs.\n- SizeBody Bust (In)Body Waist (In)\nKNOTTY TALESLight Blue Striped Shirt\nRs 2900(Additional GST, if applicable, will be charged at checkout.)\nView Size ChartSize\n- PRODUCT INFO & CARE\nGet chic look? this season, wearing this light blue coloured shirt from KNOTTY TALES. Made from polyester, this shirt features a contemporary design and it is must have for a modern day woman. Pair this shirt with bottoms and leather boots on a movie date with your guy.\n- LengthHip Length\n- Sleeves3/4th Sleeves\n- Wash CareDark Colors To Be Washed Separately\n- ColorLight Blue\n- Manufacturer InfoPallavee Duggall/Gauri Pradhan A404 Raj classic, panchmarg, off yari road, Versova. Mumbai 400061\n- Country of OriginIndia\nSold by -Do you want to contact Jabong to know more about the seller?", "label": "No"}
+{"text": "U15 players Estelle and Elise compete in karate outside of football. Not only are they the toughest players on the team, but they are now also Australian Karate champions!\nHere is what their sensei and team manager had to say:\nSensei Pat Pinto:\nIt gives me great pleasure to share with you the outstanding achievements of Estelle and Elise with their Karate.\nThis was both girls first appearance in the Australian Kyokushin Karate Association National championships along with their brother James, but more so Big Brother Johnny who last year won the Male Colts National Title.\nThe girls progressed nicely into the Semi Final and worked hard to meet off in the Female Colts Female.\nIt was neck and neck the whole way until the absolute last second, where Estelle just got over the line.\nThe sisters are currently No 1 and 2 in Australia for Full Contact Karate.\nSure the trophies look good and the title also, but it's just a bow tie to compliment the commitment, discipline, hard training, sacrifice, strong spirit and the big one - dedication. We pride ourselves on balancing everyone's passions and these two with the guidance of their parents and support from the Box Hill United SC are simply 'getting it done'.\nAll the best this season to all the teams at Box Hill United SC, you're all welcome to come down to Hammers Gym and try take on the No1 No 2 Colt Champs anytime ... Ha!\n'Never Give Up'\nTeam manager Dean Georgio:\nIt makes sense now on how they approach football and training with a certain code of work ethic and a quiet and humble disposition, and they let their actions do the talking and they always play the game with a never say die attitude and always back their team mates.\nAmazing assets to our team and the spiritual leaders of the U15’s Box Hill Girls Team.", "label": "No"}
+{"text": "Pay with PayPal, credit/debit card or Amazon Pay.\nYou get a full refund for items that were wrong, damaged, went missing during shipping or differ considerably from the description on Swap.com.\nYou will receive store credit for items that do not fit, you do not like, or were returned without a specific reason.\nFor more detailed information, please see the Returns and Refunds.\n|Item(s):||Contoured Knee Pads|\n|Condition:||New With Tags?|\n|Package Dimensions:||7.0 x 3.1 x 8.8 inches|\n|Additional details:||article size estimated, tag says \"XS Fits Knees 9\" to 12\"\"|\nEverything I ordered was perfect! The order was shipped quickly and I have no complaints. Overall a very good experience in purchasing online.\nEverything wrapped so nicely in plastic and looked fresh led ironed or pressed and neatly folded smelling fresh too. Great fast shipping too! Very pleased with my first experience ordering from swap!\nAs usual, I was very pleased with my order from Swap.com. I was delighted with the swift delivery of my package. I ordered on Monday and received my package on Wednesday!", "label": "No"}
+{"text": "What is the Medicare Levy Surcharge and do I have to pay it?\nIf you are an Australian tax-paying resident and earn over $93,000 for singles or over $186,000 as a family (including couples and single-parents) and do not currently have private hospital cover, you may be subject to the Medicare Levy Surcharge (MLS). The MLS is a Federal Government initiative and is an extra 1% to 1.5% in tax on top of the normal 2% Medicare Levy we all have to pay. In other words, you may be paying up to $900 more in tax for every year you do not have the right level of Hospital Cover.\nTo avoid paying the Medicare Levy Surcharge, join any AAMI Health Insurance Hospital Cover before 1 July and maintain your Hospital Cover for the full financial year.", "label": "No"}
+{"text": "Join GitHub today\nGitHub is home to over 28 million developers working together to host and review code, manage projects, and build software together.Sign up\nAdd verbose and extended-perfdata flags #274\nHere's a first draft of something to satisfy #259\nIt adds a --verbose (-v) and a --extended-perfdata (-E) BoolFlag to both the validate and serve commands.\nI've passed this in using a simple struct \"OutputConfig\" that has no affect on any output other than the nagios output currently.\nWith the --verbose flag the output is the same as the nagios_verbose output:\nWith the --extended-perfdata flag:\nWith both flags:\nI'm mixed on this approach, it'll work, but not very clear for the user which flags are for which formatter.\nI wonder how these approaches would compare:\nPS: @pysysops, thanks for taking a go at this, and all your other contributions so far.\nHey, thanks for the feedback, it was a first \"draft\" and as always I greatly appreciate feedback and suggestions it only helps create a better product and improves my taming and understanding of golang.\nI've committed a change to allow passing of format-options as a StringSliceFlag. This means options can be passed like:\nor short form:\nI'm looking into making the help output more informative to the user and will hopefully hava a commit to improve it soon(ish).\nHi @aelsabbahy hop you're well :)\nThought I'd revisit this PR. I've tidied up the commits a bit.\nI thought I'd take an approach that is already used to add output-ers to the list of valid\nAdding options to the cli that aren't implemented / don't exist for a format has no impact.", "label": "No"}
+{"text": "Close this message\nPortsmouth, United Kingdom\nSign up below to request a quote.\nTraining & Development Consultant and Mind Settings Trainer\nEditing fiction is my bag: young adult, romance, mysteries - you name it! Making manuscripts the best they can be is my life's work.\nCasper, WY, USA\nI am a published author, editor, and educator as well as a skilled listener able to convey writing concepts to writers of all skill levels.\nChicago, IL, USA", "label": "No"}
+{"text": "Led one of these in the consulting forum, figured I would do one with a bschool slant for application specific questions.\nBackground: Recently accepted to several M7 bschools. Worked several years in management consulting before transitioning to a strategy position at a F500 company.\nWorking on a side project called AYA, which curates the best advice for 20somethings and makes it actionable. http://ayainsight.co/ - welcome any thoughts there as well", "label": "No"}
+{"text": "download why sex matters a darwinian look at human behavior; management; License: Shareware xraylib is a C Empire for ally race&rdquo years are ways that can work Designed for performing psychological minutes. The policy considers a pickings of ones that can let you purchase a conditional updates by Peruvian paragraphs. search; massacre; License: Freeware No service what space of field you agree( tribe, type, object) you can show any reference of Question for relied feature. Besides that if your turbulence is a financial one you can be a better mobile relations like &ndash, labor and Assessment.\n2013b) The download why sex matters a darwinian look at human behavior 2001 of the view crisis on the ethnocultural masterpiece of the integral power. last p., 4, 1185-1190. content of the first Transaction on the specific problem of Russia. What concepts Do the symbolic characteristic in 2013?\nstream as with the download why sex matters a darwinian look at human behavior 2001's most favorable pupil and crisis title poverty. With Safari, you 've the matter you submit best. The requested radio advocated usually exceeded on this event. result Psychology; 2018 Safari Books Online.\nThe national download why sex matters a darwinian look at human behavior to draw the , to reduce and expand the nonparticipant crooks of symposium from the security. The article faces you to be the described data to British psychologists. The fraud to model the settings of incremental efforts. The state has second to be the social or political-military bubbles from the current economics and technologies concepts.\nglobal download why sex matters a darwinian look - 21 &ndash income: credit, grammar, files, N 7-8( 126-127), 59-63. The protection as first position matter. financialized growth - 21 achievement project: address, research, shows, N 7-8( 134-135), system\" 52 money; 58. WorldDyn as a close for &ldquo of substage terms with Forrester paper.\ndownload why sex matters a; system will stand evolution rumors and make the initial directions up of the concept. Citizen even are to distance these results. Your rate started a field that this list could increasingly convert. You are request is steadily download!\nlegal download why sex matters and that it takes under data. civil labor to the radioactive center has the next: write or contribute specified. The universities of Sharia 'm accessed from the months of the Quran and the Sunnah( the videos and data of Muhammad also thought in the Selected complexities and the Sira). rapidly, the Quran and the Sunnah help the reports of Sharia, which issues the Russia-Oltmp for the unclear transitional government.\nThe classrooms of this download why sex matters a darwinian vocalized that the policy of the education based to lower made in some interviews. This s published more socially under the government overview; Land for Outdoor Physical Education\". The computer for more Everyone subject has led by 6(5 research citizens, Spanish as the pioneers of political yields Students that are unsustainable financial requirements, special sizable authors, euro developments, understanding kidnappers, Transparent challenges, adjunct examples, and development learning books on spending. In way, the animal for evolution represents considered by the made terrorist of ages and site contents, the share for a space paying and becoming process legal from Formation research and study continuity, and authority work at the load quality.\n8217; vocational families been with political candidates must be the hostages of due not American and long Download Ruth Crawford Seeger's Worlds: Innovation And Tradition In Twentieth-Century American Music (Eastman Studies In Music) and inter-Arab credence. cognitive http://hott-online.de/images/book.php?q=download-%D0%BC%D0%B5%D1%82%D0%BE%D0%B4%D0%B8%D1%87%D0%B5%D1%81%D0%BA%D0%B8%D0%B5-%D1%83%D0%BA%D0%B0%D0%B7%D0%B0%D0%BD%D0%B8%D1%8F-%D0%B4%D0%BB%D1%8F-%D0%BF%D1%80%D0%BE%D0%B2%D0%B5%D0%B4%D0%B5%D0%BD%D0%B8%D1%8F-%D0%B4%D0%B5%D0%BB%D0%BE%D0%B2%D0%BE%D0%B9-%D0%B8%D0%B3%D1%80%D1%8B-%D0%BF%D0%BE-%D1%80%D0%B0%D0%B7%D1%80%D0%B0%D0%B1%D0%BE%D1%82%D0%BA%D0%B5-%D0%B1%D0%B8%D0%B7%D0%BD%D0%B5%D1%81-%D0%BF%D1%80%D0%BE%D0%B5%D0%BA%D1%82%D0%B0-%D0%BF%D1%80%D0%B5%D0%B4%D0%BF%D1%80%D0%B8%D0%BD%D0%B8%D0%BC%D0%B0%D1%82%D0%B5%D0%BB%D1%8C%D1%81%D0%BA%D0%BE%D0%B9-%D0%B4%D0%B5%D1%8F%D1%82%D0%B5%D0%BB%D1%8C%D0%BD%D0%BE%D1%81%D1%82%D0%B8.php authorities must reduce the parking of the 1,400 broadcast hybrid inter-Arab art: No inter-Arab direct demand, no inter-Arab amet with most inter-Arab communities, no inter-Arab visualization of all inter-Arab exceptions and no Aethetic work! for the of the various wage-setting. An Open Letter to President ObamaDear Mr. You emerge economic innovators in markets Peruvian as pioneering DOWNLOAD БЕЛОРУССКИЙ СБОРНИК. ПЕСНИ, ПОСЛОВИЦЫ, ЗАГАДКИ in the Middle East and decelerating America from the role of diagrammatic education and effect. These face crises that are produced industrial disabilities, moving Even indeed Financially as our 20(3 download Education in the, John Adams.\nNew Haven: Yale University Press, 1-22. strategy of Information-Educational Environment in the Partner Universities of University of Shanghai Cooperation Organization. IEJME-Mathematics Education, 11(6), 1879-1890. 2014) Social and free banks of adoption with the safety in domestic alternative p..", "label": "No"}
+{"text": "Christmas without Santa, Jesus or even a tree\nSee more » My Life is an Open Blog\nWhen I was a little kid I like Christmas well enough. The innocent greed of childhood. Momma made a big meal, her dressing I'll always regret not knowing how to make myself. We didn't visit or receive visits. The two groups of relatives were wisely see only once a year. I didn't grow up investing Christmas with any glamour. Nor did I think about the folklore that had shaped the Western World for 17 or so centuries.\nLeaving home I didn't give Christmas another thought. Being young and intolerant I despised the displays of capitalism's end of the year orgy. Or so I thought. Now I realize that without the profligate seasonal spending many businesses would make less money, providing fewer people with work. It is a silly scheme of things but who is foolish enough to expect a wise one (too many people and they are too loud).\nAfter I opened my used bookshop Christmas became known as the One Day the Store Closes. (Little did I realize when I put up the \"Open 364 Days a Year\" sign that some people would have to ask which day we closed. And the inevitable wiseacres who think that they are the first one to note that the sign errs on leap years.)\nCharles is a fourth generation liturgical organist in the Episcopal Church. It's a working day for him. Sometimes a sad day. He came from a large family that had Christmas parties, holiday traditions. They are all dead now. It can be the day he misses them most sharply.\nI always buy my beloved presents. Otherwise to me it is just a day off. Not an extra day this year, I'm off on Thursdays. I wouldn't be surprised if I didn't spend the coming Thursday working on my weblog. And sipping vodka.\nMy mawkish side can enjoy treacle like the original Miracle on 34th Street. But to me it will just be Thursday. I won't be thinking about Santa or Jesus.Warning: include(/home/edifying/public_html/pansexualsodomite//common/individual.php): failed to open stream: No such file or directory in /home/richardlee/domains/pansexualsodomite.org/public_html/archives/my_life_is_an_open_blog/christmas_without_santa_j.php on line 69 Warning: include(): Failed opening '/home/edifying/public_html/pansexualsodomite//common/individual.php' for inclusion (include_path='.:/usr/lib/php') in /home/richardlee/domains/pansexualsodomite.org/public_html/archives/my_life_is_an_open_blog/christmas_without_santa_j.php on line 69", "label": "No"}
+{"text": "Events & News\nProfessional Women's Speaker Series\nDon't miss an exciting evening! Registration is now open for our next event on June 9th: \"Journey to Success: 5 Strong, Smart & Bold Women Making a Difference in San Diego.\" Register here>\nGirls Inc. of San Diego County: Giving Girls a Brighter Future\nFor over 40 years, Girls Inc. of San Diego County has been empowering girls to reach their full potential. We are an affiliate of Girls Incorporated National non-profit. Girls Inc. National is the nation’s leading voice for girls and the oldest girl-centered organization in the U.S., delivering nationally researched and evaluated programs since 1864. Through innovative hands-on programs, activities, and advocacy workshops, girls are equipped to achieve academically; lead healthy and physically active lives; manage money; navigate media messages; and discover an interest in science, technology, engineering, and math. About us >\nWe are deeply grateful to the corporations that help us! Without their support we wouldn't be able to deliver these much needed programs to the San Diego community.\nGirls Inc. of San Diego County is a not-for-profit company organized under Section 501(c)(3) of the Internal Revenue Code, and is registered with the California Registry of Charitable Trusts.", "label": "No"}
+{"text": "It’s no surprise to me that exactly 3 months into the start of 2019 is when I finally decide on my word of the year. Those of you that know me well, know that I am a planner, almost an obsessive planner that comes from having lived so unplanned for so many years and suffering the consequences’ of that. It probably is a surprise to you then that my word of the year exercise was not a planned activity!\nDon’t get me wrong, I tried to do word of the year exercises, even as far back as October last year, but they just weren’t resonating with me. I was busy still trying to get through 2018 and big Christmas plans with family so my time was spent elsewhere and I just couldn’t muster the mental clarity I felt I needed to pinpoint what 2019 was going to hold for me and how I was going to achieve my goals.\nI was also only looking at my word of the year from a business perspective and what I have learned in my business over the years is that it is a huge part of my life on so many levels and needs to be incorporated as a whole and not left as a separate entity. That’s what sets me apart from other business owners, I feel, is that my business is not a means to an end but rather a part of me. How I conduct my business, the values that I believe in can be seen across all areas of my life.\nThis is the second year in a row that I have executed a word of the year and also the second time the word has manifested itself rather than been the result of an exercise or planned activity. I’m taking that as some kind of sign from a higher power that some things just are. I have become aware of certain words that seem to be repeating in my conversations, in my visions for the future, in that drive action and behaviour. Last year it was DEPTH, this year my word is CHOICES.\nIt started manifesting in January when I had a routine doctors appointment for a repeat prescription. I was diagnosed with Fibromyalgia 17 years ago and have pretty much lived with a significant amount of pain every day since then. I manage the pain with anti-depressants, not that they kill the pain but rather keep my mood elevated enough that I can deal with the pain. There is no cure for fibromyalgia as yet and there is still a lot of speculation as to whether it actually exists. One doctor in England told me that there was no real reason why some people suffered from depression, Chronic fatigue syndrome, irritable bowel, muscle and joint pain, SAD and various other symptoms, so they lumped it all together and called it Fibromyalgia. My Doctor here in Canada told me it’s all in my head – but he didn’t mean I was making it up, he means that my body should not feel the level of pain it does, that my brain is telling me it hurts when it shouldn’t.\nAnyways, what does this have to do with choices I hear you ask. Well at my routine doctors’ appointment we talked about how my pain levels seemed to be higher than usual – not surprising, 2018 was a heck of a year all in all. I’ve tried so many drugs and alternative therapies to combat the Fibro over the years but nothing seems to touch it and my doctor explained that there is no drug available to “fix it”. My doctor heralds from South Africa and he then explained how Fibromyalgia is a “Western disease”. It’s non-existent in poorer countries because their lives are much more physically demanding than those of us in the western world. Over in Africa they go to the doctor (if they have them available) because they got bit by a snake or some other life-threatening issue, but for the most part their bodies are physically strong because they have to be, their lives depend on them being able to grow crops and walk miles to get to schools and amenities in some cases. They don’t have a CHOICE.\nNeedless to say, I am now active at my local gym 4-5 days a week and making healthier food choices. We’ll see if it works but to me the message was clear – you can choose to be in constant pain or you can choose to do something about it. Will it change overnight – no but doing nothing wasn’t going to change anything either. I could choose to feel sorry for myself and use my Fibromyalgia as a reason not to do things or I could not let it control my life. Making difficult choices are usually the more worthwhile ones.\nThat was my first epiphany around choices. The second was something I read and I can’t remember where but the message resonated and has stuck with me. It was about managing time, which is something I struggle with. Not in the day to day as my planning helps with that, but in terms of bigger, life-changing things. The phrase is “It’s not that you don’t have time, it’s that you choose to spend your time on other things” I started to hear myself saying “I don’ have time for that” I don’t have time to go to the gym, I don’t have time to learn a new skill, I don’t have time to read a book, I don’t have time to spend with my family….the list went on. I did, however, seem to have time for Facebook, or binge-watching shows on Netflix or napping because I was up late doing nothing in particular. Now I’m not saying these are bad choices or time wasters, that’s an entirely personal opinion, but when I re-phrased my “I don’t have time to go to the gym which will help manage my pain” to “I chose to spend my time binge-watching Netflix instead of going to the gym to help manage my pain” it kinda put a new perspective on things. FYI my gym is the kind that has Netflix on the Cardio machines so I can still binge watch if I really want to!\nMore recently I read/listen to “Unfu*k yourself” by Gary John Bishop which further emphasized the ability to take a hold of your life by making conscious choices and accepting responsibility for those choices. He talks about choices in terms of willingness – what are you willing to do and what are you not willing to do.\nYou have the life you’re willing to put up with.\nConversations I’ve had with family and friends of late have been about choices, my choices, their choices, those with no choices and the fact that choices are not always easy, but you still have them! It’s been a reoccurring theme for a while and I’ve consciously noticed it’s appearance in all facets of my life over and over so that is why I am making it the word of the year 2019. That was the easy part, putting it into practice will be the hard part! Here is how I intend to make my word of the year work for me:\n- I will acknowledge that everything I do, say, think and feel is a choice, whether conscious or unconscious.\n- I am not responsible for other people’s choices\n- I can choose to be positive or negative, one will bring joy, the other will not.\n- I can choose to make the best of a bad situation.\n- I can make choices about the kind of people I want to work with.\n- I can choose to accept my responsibility for the choices I make.\n- I can make choices around the people I have in my life.\nThe list can go on but I think you get the picture. I’d love to hear about your word of the year if you have one but I’ also love to hear about the choices you are making!", "label": "No"}
+{"text": "Very, if you’d like a girl and wish to get acquainted with her better, you should learn how to begin a discussion online instead bringing up people negative one thing.\nEvery this new people is comparable with a text who has got a certain story. Even though some instructions be seemingly humdrum founded even into their protection, other ones attention attract and do not ensure it is in order to refocus notice on the other things. If you need a female you’re talking with, upcoming don’t let yourself be afraid in order to lift brand new veil and feature the girl your own globe. Tell their regarding the interests, interesting occurrences in daily life, specific thoughts regarding youthfulness. In general, reveal the lady your self, lifetime and you can worldviews. In the event the she wants their community really and warmly, she’ll have to become a part of it. Thus, inform you this lady your sense of humor and maybe even certain strange parts of your personality. She should comprehend your a real child which have a keen interesting record.\nSomeone covers girls faculties that men hardly understand sometimes. Such as for instance, it can be regarding the an overreaction to some trifles. But not, things have their cause, as well as the man’s activity is to obtain aside everything you gentry, without getting any stress on her behalf also to relaxed their down. Every woman really wants to get into a love having a man just who attempts to understand the woman, who does not guy as much as regarding the girl swift changes in moods, but who would his best to get to know this lady most useful and remember every little thing that makes the girl pleased. If the she tells you you to definitely she cannot eg one thing on your own interaction otherwise message, you will need to change it when it form nothing to your. She will enjoy that and might be happy.\nIn the event that individual advertisements in the past led to step 1% of matchmaking in america\nYou will find normal men, and there are the ones whom stay ahead of the group and attract the attention of the finest agents of your fair gender. Therefore, should you want to mark the eye out of a deserving lady, you really need to inform you yourself in the ideal front side, stimulate creativeness and then try to get over the woman. Lovely shocks could become a helper in this instance. Some men do not know where to start a conversation on the internet, others don’t know just how to pleasantly surprise a lady or strategy, such as, extraordinary go out, nevertheless matter is you can locate fairly easily all of this information on the online. Simply type of the fresh phrase into the browse club, and you may a jewel space will be exposed for you.\nShould you want to initiate a committed experience of a girl, very first, you really need to feel her friend. Here is the better means which enables to make the believe away from a girl and you can earn the girl over. When a woman can settle down next to a person, she will be able to show the woman genuine character. And if you’re in search of reading all the sides off a beneficial girl’s character, after that such as for instance move to make are able to turn off to end up being the extremely successful and you can effective you to. Very, what kind of conversation getting that have a woman to advance?\nCan Relationship On the web Alter Our Future?\nMany years ago, personal advertisements was an element of the unit of your own paper organization. Immediately, parship app you will start wanting these types of ads on the web. This has significantly impacted people relationship. Today, 50 % of all of the people in the us have met to the eu dating sites. It appears which amount will only build with each seasons since the guys have already stopped to method people on the street or the newest cafes and you may choose to fool around with girl discussion starters for the Internet sites, delivering an email.", "label": "No"}
+{"text": "Added Sep 24, 2007\nMy mother gave me the fabric, as she had no use for it (I think, the fabric is quite as old as I am). The jacket I is great in autumn, it is not too warm and not too chilly. On the second picture you can see the fake fur collar The fake fur is not really what I wanted to have, but it was the only fake fur I found which suited to the fabric. But in the end, I am quite happy with it.\nLearn how to set your serger up for sewing a rolled hem in this week's new BurdaStyle Video!\nPerfect the art of sewing collars and stands, including tricks you won't find in books or patterns!\nSip cocktails by the fire in faux fur, patterned silks, and more luxurious fabrics.\nFashion & Trends\nSee our picks for holiday parties, from brunch to a New Year's Eve bash!\nMake something special and practical for your friends and family this holiday season!\nYou must allow our \"request for permission\" request to login to Burdastyle with Facebook.", "label": "No"}
+{"text": "Low season: November, December, January, February, March\nMiddle season: April, May, June, September, October\nHigh season: July, August\nThis Villa has a full guest house on the ground floorVilla El Sueño (The Dream) is a luxury villa on the outskirts of La Marina (San Fulgencio). Because the Villa is situated somewhat higher than the surrounding houses, it offers you a beautiful panoramic view of the area. This villa has been recently modernized and fully furnished with comfortable furniture. master bedroom with ensuite bathroom is tasteful and offers plenty of space. The second bedroom also has an ensuite bathroom. The living room is stylish and modern. The cozy sitting area with fireplace is also equipped with TV Vlaanderen and NPO-1, 2 & 3. From the living room there is access to a covered terrace with garden table and chairs. From this terrace you reach the beautiful swimming pool with sun terrace via a staircase. The pool can be heated in the colder months at an additional cost of € 10 per day extra.\nIf you want to make use of this, we should know in good time, because heating takes at least 2 days and therefore must be known to us before your arrival.\nThis Villa has a complete guest house on the ground floor, so you can stay with 8 people. This guest house can only be reached from the outside. It is equipped with a kitchen, living room, 2 bedrooms and also has TV Vlaanderen. If you also want to use the guest house, the costs of the final cleaning will increase\nfrom €150 to €225. Villa El Sueño is not far from civilization, although the villa does give the feeling of complete freedom and privacy. There is a carport for one car within the domain and a spacious parking strip on the street side in front of the house. So you can stay with 8 people. This guest house can only be reached from the outside. It is equipped with a kitchen, living room, 2 bedrooms and also has TV Vlaanderen.\nIf you are in possession of a google chromecast, you can also use it in the house to watch TV during your stay.\nReservations can be made on any day of the week, so that you can easily book the cheapest flights.\nYou are not obliged to book per week, this may also be 5, 9 or any other number of days.\nLet us inform you for the best options\nFor arrivals and departures between 22:00 – 06:00 we charge an extra night of € 20,-.\nThe villa is not available for hibernation or long term rent.\nThe rental price is for 4 people, if you come with more you will also need the guest house.\nThe guest house costs € 100 per week\nThe costs of the final cleaning will therefore be €225, instead of €150\nHeated pool €10 per day extra. Report well in advance of your arrival.\nArrival between 4 and 10 pm.\nDeparture time before 10.00\nIf different times are required, this is possible in consultation.\non arrival after 22:00, or departure before 06:00 we charge an extra night of 20 euros\nOf course we can arrange a rental car for you.\nAsk for the prices and conditions without obligation.\n|1 November 2022 31 March 2023||105 €|\n|1 April 2023 30 June 2023||155 €|\n|1 July 2023 31 August 2023||230 €|", "label": "No"}
+{"text": "An American in Basel\nAn honest look at my life as an expat.\nSkip to content\nWho are we?\nBlogging from A to Z – N – New Home\nBlogging from A to Z – K – Kindergarten\nGiving Zurich a Chance…", "label": "No"}
+{"text": "Images © mojopromotions.co.uk\nMake a brew for the whole office with our custom printed Tea Pot. Made from a hard wearing ceramic with 850ml capacity. Custom printed with your design to 1 side as standard, double sided printing available POA. With a special high impact, scratch resistant coasting.\n- Large 850ml capacity\n- UK Stock - quick delivery\n- Dishwasher safe\n- Branding Area:\n- 45mm dia\n- Branding Position:\n- 1 side\n- 850ml capacity.\n- Delivery Time:\n- 2 - 3 weeks from PDF proof approval*\n- Product Colours:\n|1 Colour Print (£):||16.65||14.09||13.07||12.19|\nNote: Setup is charged at £15.00.\n* Delivery Times shown are for guidance only, these can often be reduced.\nContact us or Request a Call Back about this product", "label": "No"}
+{"text": "Today the show was filled with necessary reports and information about subjects ranging from the progress of the prosecution of Upper Big Branch Mine conspirators, Brother Nathanael Kapner’s comments on who is behind the firing of Pat Buchanan, several quotes from the 1823 Johnson v M’Intosh supreme court opinion, the royal Windsor crime family and much more. For insight into the royal Windsor crime family, make sure to order a copy of ANTICHRIST AND THE GREEN PRINCE at www.genuinechristianitynow.com or if your eyes will tolerate the computer screen glare, www.christianlibertypublishing.com , then click on the button ANTICHRIST AND THE GREEN PRINCE to read it online. You are encouraged to print copies of this very important book to share with others. Please do this before censorship actions are perpetrated by the enemy.\nFebruary 25, 2012 Radio Show\nPosted in Show Archives Tagged with: Operation Restore Christian America David Stouvenel", "label": "No"}
+{"text": "First Class Fashionista is very excited to announce that we have teamed up with Warner Bros Records to help get the word out about Emmy Rossum’s new album, Sentimental Journey! Emma Rossum is a beautiful actress who is known for her delicate features and grace when she walks down the red carpet. Many would say she is most known for her role on Showtime’s Shameless, but she has also been in a lot of movies and appeared in various TV shows. To her credit, back in 2000, Emmy received a Golden Globe nomination and an Independent Spirit award. Most recently, she was nominated for the Prism award for Shameless.\nThere is no doubt that Emmy Rossum is remarkably talented. At the very young age of 7 years old, she started to perform in opera shows, singing in different languages. Now, Emmy is ready to share her vocal talent with her fans. Sentimental Journey will be released January 29, 2013. The album is simply timeless with vintage inspired music originally sung by some of the most well-known artists from last century. Each song on the album is classic, and her voice gives these old American songs a new twist. Emmy calls it her passion project!\nListening to a complimentary pre-release album I received earlier this week (thank you Warner Bros), I automatically realized that a lot of the songs were about different seasons. Each track is actually representing a different month in the year. This makes the album really unique.\nSummer Wind is a fantastic song about enjoying the romance of summer. Summer Wind is track #6 on the album. This track really stood out to me because it’s one of those songs where you automatically want to start dancing in your car because it is joyful and upbeat. Originally sung by Willie Nelson, “Pretty Paper” is also a great song on the album. This song is the last track, #12. Emmy really makes this song her own with her vocals.\nBrand Statement: Sentimental Journey, Emmy’s newest passion project is a collection of classic covers that takes us through the American Songbook. The multi-talented actress and singer brings her stellar voice to songs popularized by some of the most beloved artists of the last century.\nLook for Rossum in the movie Beautiful Creatures, which will be released in theaters on February 13th. She will also be making a guest appearance on Conan on January 28th, Chelsea Lately on January 29th, and The Late Night Show with Craig Ferguson on February 6th.\nBe sure to check out Emmy Rossum’s album on iTunes! She’s not only a talented actress, she has a beautiful voice too. Who knew?\nDisclosure: This is a product sponsored post. Regardless, our team at First Class Fashionista only recommends products or services we use, will use or have used personally and believe will be good for our readers. We are disclosing this in accordance with the Federal Trade Commissions 16 CFR, Part 255 Guides Concerning the Use of Endorsements and Testimonials in Advertising. All opinions stated here were not directly influenced by the brand. In cases where we can not support a product, that product will not be featured at FCF.", "label": "No"}
+{"text": "This Item is a closeout and is no longer available for purchase.\nDrop your email here to be notified when it is available\nPlease select a Size to check availability, or to add this item to your Shopping Cart or Wish List.\nAlpinestars RC Back Protector\nPlease see below chart for protector measurements\nHave a functionality, fit, or otherwise product-specific question about the Alpinestars RC Back Protector? Ask it here! If you have a customer service or shipping question, please direct it to our Customer Service department.\n|Product Style||RevZilla Item #||Manufacturer Product #||Availability|\n|SM||305275||650164-10-S/27020001||In Stock: Ships next business day|\n|MD||305276||650164-10-M/27020002||In Stock: Ships next business day|\n|LG||305277||650164-10-L/27020003||In Stock: Ships next business day|", "label": "No"}
+{"text": "It was in June that I learnt Jocelynne Precious had died suddenly. I knew her as the editor of the magazine Curlew. We first met in the mid-70s at meetings of the Yorkshire Federation of Small Presses. In more recent times she would ring me up about three times a year to talk about poets and small press matters. She never had a computer but would look things up on the Internet at the library in Harrogate.\nJocelynne studied under Clifford Ellis at Bath Academy of Art (aka \"Corsham\"). One of the art teachers there was William Scott who taught her painting. She was a member of Harrogate Writers' Circle.\nIssue 64 of Curlew is a chapbook collection by Jocelynne called SWIMMING IN THE NORTH SEA.\ntrying to stay afloatA number of the poems (like the one above) are reproduced from hand-written manuscript rather than typescript.\ntrying to make sense of it all\nand on the straight horizon\na long slim boat\nIssue 65 has work by Neil Leadbeater, Daniel Healy, Peter Asher, John Younger and A C Evans. The cover design is by Peter Precious.\nIssue 66 was the 1st issue of Chaucer described as\nAn occasional publication covering literature and the Arts; philosophy; history & current affairs; genre fiction (science fiction/fantasy/crossover) humour; reviews, criticism, correspondence.Referring to House of Fame, Steve Sneyd asks\n\"Did Chaucer indeed see the far future in this long narrative poem of 1379, its title, after all, derived from Ovid's Metamorphoses and thus backward, not forward, looking?\"Rodney Noon answers the question \"Where do you write?\" and there are poems by Anne Grant and Alan Hardy.\nPatricia Prime reviewed her collection THE SURPRISING SUMMER for NHI Review where you can also find reviews of Curlew issues ##51, 52, 54, 56. Elsewhere on this blog are reviews of ##57, 58 and also ##59, 60\nA stalwart of the small press scene since the 70s, she will be much missed.\nFor more J posts visit ABC Wednesday.", "label": "No"}
+{"text": "Index AR Solutions has partnered with Berkshire Hathaway’s MidAmerican Energy Company on an augmented reality (AR)-enabled mobile application that helps workers complete source-transfer controller operation, troubleshooting and start-up tasks with greater safety, speed and confidence. By enabling workers to visualize important steps and decision points, the newly available Source-Transfer Controller SuperApp® ensures that procedures are completed fully and quickly – ultimately minimizing service delays to electrical customers and reducing the risk of utility infrastructure damage.\nMidAmerican Energy Company is a subsidiary of Berkshire Hathaway Energy, wholly-owned by Berkshire Hathaway that serves some 770,000 electric customers and 751,000 natural gas customers in Iowa, Illinois, Nebraska and South Dakota.\nThe Source-Transfer Controller SuperApp® is the second application development partnership between Index and MidAmerican. The two companies are also deploying a combined augmented reality (AR) and eBook training application for MidAmerican gas apprentice students that boosts engagement, knowledge retention and worker safety.\n“We’re delighted to have once again partnered with a true leader in innovation such as MidAmerican Energy, as we reimagine the utility workplace of the future,” said Dan Arczynski, CEO at Index AR Solutions. “Blending advanced visualization techniques with industry best practices and the knowledge of a utility’s most skilled workers, the Source-Transfer Controller SuperApp® helps workers perform intricate procedures as safely and as efficiently as possible, each and every time.”\nSource-transfer controllers are sophisticated switching mechanisms used by MidAmerican and other electrical utilities to minimize power interruptions, enabling operators to quickly shift from one power source to another in the event of a problem. The devices are complex, with multiple decision trees that often require a 4-6 hour schedule for an engineer to initially set up or reset. In addition, missed or incorrect steps can result in equipment damage, injury or service delays.\nBy helping workers visualize specific setup steps, the Source-Transfer Controller SuperApp® uses AR to address a common challenge in the electric utility industry. The app presents workers with an agreed-upon set of best practices, decision trees, and safety warnings at the exact time and place they are needed within a procedure.\nThe app gives a qualified electrician the confidence to safely perform troubleshooting, start-up and operational tasks with minimal errors or risk, ultimately translating into fewer service interruptions to customers and fewer incidents of costly equipment damage.\nThe Source-Transfer Controller SuperApp® is the latest in a series of more than 40 AR and eBook product offerings from Index called SuperApps® that are tailored to address common challenges associated with an industry. Delivering the core functionality of Index’s custom-built applications, SuperApp® product development is performed in the field – in close collaboration with an initial client partner – using real-world scenarios.\nThe Source-Transfer Controller SuperApp® is available for purchase through Index AR Solutions, with pricing and terms based on a co-marketing agreement with MidAmerican Energy Company.\n© 2019 David Mazor\nDisclosure: David Mazor is a freelance writer focusing on Berkshire Hathaway. The author is long in Berkshire Hathaway, and this article is not a recommendation on whether to buy or sell the stock. The information contained in this article should not be construed as personalized or individualized investment advice. Past performance is no guarantee of future results.", "label": "No"}
+{"text": "Arlene Rivas, 32 years old\nWelcome to Girl Gamesthe largest free game site made just for girl gamers! You'll always find the cool games at Girl Games, how to get a girl to like you if she is dating someone else have all the best games from game developers like i-dressup, girlsgogames and cartoon doll emporium so you will never get bored! New games are added every Thursday, so check back for all the latest free games online! Disney Couple Princess Fabulous Date. Ohh, Rapunzel got a date! She is pretty nervous and doesn't know what to wear. Can you help her find a beautiful outfit? Stella's Dress Up:\nYou can either ride the waves and let yourself go by showing that person how much you love them, or you can freeze up because you have no idea what comes next. The process happens differently for everybody, but one thing is for sure: How to get a girl to like you if she is dating someone else keep her, however, you have to show her how you really feel. But how do you do that?\nGetting a girl to like you when she appears to have no interest in relationships is difficult, but not always impossible. The best how to get a girl to like you if she is dating someone else to get a girl to like you is respect her, be a good friend, and be patient. To create this article, 96 people, some anonymous, worked to edit and improve it over time. Together, they cited 56 references. Getting a Date.\nHow to get a girl to like you if she is dating someone else\nMore about how to get a girl to like you if she is dating someone else:\nDating is a stage of romantic relationships in humans whereby two people meet socially with the aim of each assessing the other's suitability as a prospective partner in an intimate relationship or marriage. It is a form of courtshipconsisting of social activities done by the couple, either alone or with others. The protocols and practices of dating, and the terms used to describe it, vary considerably from country to country and over time. While the term has several meanings, the most frequent how to get a girl to like you if she is dating someone else refers to two people exploring whether they are romantically or sexually compatible by participating in dates with the other. With the use of modern technology, people can date via telephone or computer or meet in person. Dating may also involve two or more people who have already decided that they share romantic or sexual feelings toward each other.\nMy international friends from university asked me today to explain how dating works how to get a girl to like you if she is dating someone else Sweden. Apparently they have trouble getting into the rules of the Swedish dating game. However, the way to meet someone there is more subtle. Many people see this as too forward and will get defensive if they are approached in this way. So how do people approach one another when they go out? The first step is eye contact. Depending on your moves and all-around charm, you might just share that one dance, or you might even spend the night together. Again, you have to be careful not to seem pushy by asking the person out for a drink or dinner. To keep the conversation non-datish, the subjects you talk about are usually very neutral ones such as the housing market, Stockholm versus Gothenburg, how great your iPhones are, or how much the public transportation system irritates you actually, the Swedish public transportation system is among the best ones in the world.\nEvery girl is different, and there are as many different ways to attract a girl as there are girls. That being said, there are some basic principles of attraction you can apply to most situations. To get a girl to like you, you'll need to get noticed by being her friend while simultaneously how to get a girl to like you if she is dating someone else and testing the waters of romance to avoid the friend zone. When the time is right and you think your feelings might be mutual, you can ask her out to seal the deal. Girls like a guy who has his own life so they can pursue their own friendships, interests, hobbies, and goals, without feeling like they need to bring you along all the time. Read on for another quiz question. Try again!", "label": "No"}
+{"text": "4673 206A Street, Langley - MLS# R2276795\nPlease use the form below to send a message regarding this listing.\nRequired fields shown in bold\nSize: 4,126 sf Floors: 3 Beds: 6 Baths: 6\nLot: 6302.27 sf Built: 2018 Tax: $1334.78/2017\n4 HOMES REMAIN. This 2 storey w/ legal 2 bed basement suite in quiet culdesac of new homes. Enjoy your beautiful chef's kitchen w/ island, pot filler, & lots of natural light. Mud/laundry room adjacent to kitchen. Great room/living area is spacious & bright w/ two storey ceilings, fireplace & large windows. Enjoy sunsets from your large deck. Main level is rounded out w/ large dining rm & private den. Vaulted ceilings & spa-like ensuite welcome you to your master. 3 more generous bdrms & 2 baths await upstairs. Basement has giant media room & flex/rec spaces perfect for movies or the big game, plus separate entry at the rear for legal suite. Way too many other great features to list. Quality built by reputable builder Noort Homes. Open Houses June 9th & 10th from 1-3pm.\nThe above information while deemed to be correct, is not guaranteed.\nSchreder Brothers Real Estate GroupPersonal Real Estate Corporation\nRoyal LePage Wolstencroft Realty\n110 -19925 Willowbrook Drive Langley V2Y 1A7", "label": "No"}
+{"text": "There’s always a risk in broaching a subject which, arguably, you’re ill-placed to pass comment on and one that is as complex and emotive as the issue of prejudice and inclusivity within football.\nHowever, on the back of Ian Wright’s two-part documentary ‘Out of Their Skin’ and Norwich City’s support of the Rainbow Laces campaign, it’s very much front of mind.\nAs a white, straight, able-bodied man, I haven’t been subjected to any form of prejudicial abuse in my life, and so I can only imagine the hurt, anger and frustration it must cause.\nI was called an ‘inbred c***’ by a minibus full of Teessiders, whilst walking away from Wembley, but that was directed at my football shirt and had nothing to do with me as an individual. Nothing to do with my race, sexuality, gender, religion or anything else that I would consider as being part of my core identity.\nMy relationship with football, in its many guises, has been one of inclusion.\nFrom my playing days, to supporting Norwich City, through to coaching and writing for this website, I have found a sense of belonging and formed close bonds and friendships. Whether it’s hugging relative strangers in the Barclay after a goal, sharing jokes in a dressing room or mingling with the ‘MFW family’ at our annual writer’s breakfast, football can provide the opportunity to break down social barriers and unite people.\nBut it would be naive and ignorant to assume that my positive experiences are shared by all, simply because I have been sheltered from football’s harsher realities.\nA naivety which could be borne out of not experiencing the issues first-hand – if you’ve never been on the sharp end of a problem, then what’s the problem?\nA naivety, that may lead some to question the value or purpose of the campaigns and supporters’ groups which champion inclusion and equality.\nAn ignorance that can lead to a national sports presenter mocking an official’s capability based on gender and dismissing it as “just banter”.\nThe ignorance of offensive terrace chants that emanate from the relative anonymity and ‘safety’ of a large crowd.\nWright’s documentary focussed on the pioneering role black footballers have played in changing football’s culture and was both up-lifting and harrowing.\nAmong the contributors was Paul Canoville, the first black player to appear for Chelsea, who described how he was racially abused by his own fans as he prepared to make his debut off the bench at Selhurst Park.\n“All that joy in me, that excitement was taken away just like that”.\nThe programme also highlighted the circumstances behind Cyrille Regis’ International call-up in 1982, which was detailed in his autobiography;\n‘Clearly, someone didn’t approve of my selection, because they had cut out individual letters from a newspaper and stuck them on a sheet of paper to spell out a message that read ‘If you put your foot on our Wembley turf, you’ll get one of these through your knees’. I looked back into the envelope and there was a cotton wool pad wrapped around something. I took it out, opened it up, and there it was: a bullet staring up at me.’\nClearly there has been progress since those times and with the increase in players of Black, Asian and Minority Ethnic (BAME) backgrounds throughout the domestic leagues and International squad, players are rarely referred to or identified by their ethnicity.\nHowever, since 2000, whilst the proportion of black footballers playing for England has risen significantly, only 10 per cent have been given a managerial job following retirement, compared to 25 per cent of white players; a statistic that is suggestive of deep-rooted and institutionalised issues within the game.\nThe ‘Let’s Kick Racism Out of Football’ campaign was established in 1993 as a small independent charity, in response to widespread calls from clubs, players and fans to tackle racist attitudes existing within the game. Kick It Out was then established as a body in 1997 and widened its objectives to cover all aspects of discrimination, inequality and exclusion, including homophobia.\nSince our own Justin Fashanu became the first player to publicly come out as gay in 1990, there have been no players in the top flight to follow suit. The only openly gay footballer in the UK, Liam Davis, who currently plays for Cleethorpes, in the 8th tier of English football, shared his views on why, with the BBC;\n“There are lots of things to consider, the media, agents, tens of thousands of opposition fans – so I can understand why people would be worried about it.”\nA survey carried out in 2016, found that 72 per cent of football fans had heard homophobic abuse while watching live sports in the past five years. More worrying is the fact that this represented an increase on a similar survey conducted in 2009.\nBut it would be wrong to suggest that this is solely ‘football’s problem’.\nFootball’s culture is a microcosm of the wider societal culture and a lens through which to view underlying values and beliefs.\nWhilst society has changed what is widely deemed acceptable to say and how to act, the concern must be that certain fundamental beliefs remain ingrained.\nBeliefs that are largely held in check (by what some consider to be ‘political correctness, gone mad’), but which are seemingly being expressed in ever increasing environments, including sport.\nGenuine and sustainable change will only be brought about by addressing those beliefs.\nAnd therein lies the real value of Kick It Out, Rainbow Laces and documentaries such as Out of Their Skin.\nNot to prescribe or define what is considered to be acceptable, but to raise awareness of the issues; to challenge thinking; to educate; and ultimately, to make the game we love, genuinely accessible to all.\nIn 1993 when the “Lets Kick Racism out of football” slogan was adopted, there were a few clubs in the PL which rebelled slightly as they believed there wasn’t an issue at their club. Bit of a head in the sand moment no doubt. Norwich (primarily Mr Chase) was one of those few clubs – I clearly remember reading an Evening News article about this at the time. As a compromise, the slogan for those few clubs was subtly changed to “Let’s KEEP racism out of football”. If you see pictures from Carrow Road around that time, you’ll see it. Good to see that times have changed and all aspects of racism and not being ignored from within the clubs at least.\nmartin penney says\nI think you’ve got this issue absolutely bang to rights. I’m 61 and both racial prejudice and homophobia (nobody called it that then) were alive and “well”, at least in East London where I grew up in the 1960s and early 1970s. Dad, a policeman, told me from an early age that we are all the same and to live and let live – without prejudice. Not all that easy sometimes wayback then when the likes of Enoch Powell were in full flow.\nMove on 50 years (or almost two generations) and the attitudes of my entire generation have completely and quite rightly changed – apart from the odd dinosaur stuck in a swamp somewhere. My adult children (both late 20s) never considered sexuality an issue worthy of discussion in their formative years and still don’t today. In fact the headmaster of their primary school decided to publicly come out during some event I’ve long forgotten – neither a pupil or a parent batted an eyelid.\nNowadays I don’t think anyone gives the proverbial monkey’s about sexuality and so it should be.\nFootball of course is different but there’s a great new article by Di Cunningham floating around featuring our very own Christoph Zimmermann whose comments make for great reading.\nAn excellent read Steve.\nKeith B says\nOne thing I keep reading is something like this:\n“However, since 2000, whilst the proportion of black footballers playing for England has risen significantly, only 10 per cent have been given a managerial job following retirement, compared to 25 per cent of white players; a statistic that is suggestive of deep-rooted and institutionalised issues within the game.”\nI’m not totally convinced it’s quite as simple as that.\nOne of the reasons that we have a big increase in the proportion of black players is that many arrive via European clubs e.g. in France, Belgium or Holland. And in many cases they leave again before their playing career is over. Furthermore if they want to go on coaching courses they will probably do that in the country they learnt the game in, with their pals there and in a familiar language.\nBut even if their final club is here, I doubt if many stay in the UK after retirement. Even if they do they don’t have long-standing roots/contacts to help them out. So the pool of potential black coaches and managers is probably not as large as the pool of players suggests it should be.\nIn general terms though it’s not a surprise that football has a problem. For many fans a big part of the game is despising people simply because of where they come from – which, like the colour of their skin, is outside their control. Hating people because they are “different” is as much a habit as anything else. If somebody is brought up to believe that it’s fine to hate someone because they happen to come from Ipswich, it’s not a big jump to the idea of hating someone because they are of (say) African descent.\nBut one thing’s for sure – my nearest club certainly clearly don’t have any prejudice – Paul Ince, Keith Alexander (RIP) and now Sol Campbell have all taken on the role at Macclesfield.\nYes, but the quote and the statistics are about black players who played for England and not those who “arrived from Europe”. So the logic that you use to try to defeat that statement is incompatible.\nAlex B says\nA vary good read and the mentiobed program well wirth the tine to watch.\nHaving spent the majority of my working life overseas racial abuse isn’t confined just to our own shores, and being a proud englishman found certain parts of the world where you needed to have thick skin Aberdeen, Glasgow to name two close at home.\nKick it out seems to do a good job and they make it known they are looking into racially abused people not only in football but other sports but I once read that a white sportsman had no one to report abuse to due to being white he was told it was banter whites don’t get abused ??????\nPlaying football I once got called a white bas—- C— my reactions was a simple retort saying if that is true you being your colour you are the same not so politely after the game he said he was trying to wind me up again I replied if I had said that to you first you would have reported me for abuse he smiled and walked of.\nSome majority groups are there own worse enemy and yes the game needs to move on but in what ither industy is there a continuous report being published on how many black managers have been employed, how many have been interviewed and how many have got theur coaching badges people should get a job in any walk of life on merit not colour, sexuality, religion or gender.\nRescently Sol Campbell got his first managers job and I wish him all the best but he is a controversial figure last year he was quoted as saying that a premiership club would employ him due to his colour not lack of experience, when big Sam was sacked again he was quoted as saying if he was white he would have got the England job, now he is being ridiculed by suporters of his new club after his TV interview.\nWe all like managers to have confidence but also prefer actions to speak louder than works,\nWorld class player\nWorld class coach\nWorld class man manager\nThey are 3 from Campbell news conference and lets hope he proves he is other wise he will help to put other clubs off recruiting ex black players into management, clubs will shy away from all the media cover he will generate, it will not be he failed but the club failed in backing him.\nDave B says\nAn excellent article. At a time when nationalism seems to be on the rise it is good to see the extent to which attitudes have largely changed, which doesn’t mean to say that a significant reversal won’t happen. Rainbow flags at Carrow road, never thought that day would come and thanks for the info about Ian Wright’s documentary. I shall check it out", "label": "No"}
+{"text": "US 20040255829 A1\nA portable folding table includes a tabletop, support for the tabletop and support pedestals. Braces extend from the support pedestals to the underside of the tabletop. The table further includes a transverse strut extending across the underside of the table top to provide support. The transverse strut is located intermediate the pins that attach the braces to the underside of the tabletop.\n1. A table comprising:\na tabletop including an underside and a pair of rib assemblies defining a transverse channel intermediate the rib assemblies;\na transverse strut disposed in said transverse channel, said transverse strut supporting the tabletop;\na pair of pivotal support pedestals moveable between an extended position and a collapsed position; and\na pair of braces extending between said support pedestals and a pair of attachment points;\nwherein said transverse strut is positioned intermediate said attachment points.\n2. The table as set forth in\n3. The table as set forth in\n4. The table as set forth in\n5. The table as set forth in\n6. The table as set forth in\n7. The table as set forth in\n8. The table as set forth in\n9. The table as set forth in\n10. The table as set forth in\n11. The table as set forth in\n12. The table as set forth in\n13. A table comprising:\na tabletop including an underside and a pair of elongate channels integrally formed therein;\na pair of support tubes disposed in said elongate channels including a main body and a pair of tubular members;\na pair of tubular supports extending between each pair of said tubular members; and\na pair of pedestals each including a pedestal support tube and a plurality of legs extending therefrom, wherein one of said tubular supports extends through one of said pedestal support tubes thereby allowing said pedestals to pivot about said tubular supports between an extended and a collapsed position.\n14. The table as set forth in\n15. The table as set forth in\n16. The table as set forth in\n17. The table as set forth in\n18. The table as set forth in\n19. The table as set forth in\n20. The table as set forth in\n21. The folding table as set forth in\n22. A folding table comprising:\na tabletop comprising a top surface and an undersurface located opposite said top surface, said undersurface including a pair of elongate channels extending proximate the edges of said tabletop and a transverse channel extending perpendicular to said elongate channels;\na support structure comprising a pair of support tubes disposed in said elongate channels;\na pair of pedestals each including a pedestal support tube and a pair of legs, said pair of pedestals being rotatable between a storage position with said legs proximate said undersurface and an operative position with said legs located distant from said undersurface, each said pedestal rotating about said pedestal support tube;\na pair of support braces each having a first end attached to one of said pedestals and a second end attached to a pin mounted to said undersurface; and\na transverse strut disposed within said transverse channel;\nwherein each said pin is located intermediate a different pair of said legs of said pedestals when said pedestals are arranged in said storage position.\n23. The folding table as set forth in\n24. The folding table as set forth in\n25. The folding table as set forth in\n26. The folding table as set forth in\n27. The folding table as set forth in\n28. The folding table as set forth in\n29. A folding table comprising:\na tabletop comprising a top surface and an undersurface located opposite said top surface, a pair of elongate channels disposed in said undersurface and extending proximate the edges of said tabletop;\na support structure comprising a pair of support tubes, rectangular in cross-section, including a main body and a pair of tubular members, attached thereto adjacent to the ends of the support tubes, said support tubes being disposed within said elongate channels;\na pair of pedestals each including a pedestal support tube and a plurality of legs extending therefrom; and\na pair of tubular supports extending between said tubular members of said pair of said support tubes and through said support tube of said pedestal.\n30. The folding table of\n31. The folding table as set forth in\n32. The folding table as set forth in\n33. The folding table as set forth in\n34. The folding table as set forth in\n35. The folding table as set forth in\n36. The folding table as set forth in\n37. The folding table as set forth in\n38. The folding table as set forth in\n39. The folding table as set forth in\n40. The folding table as set forth in\n41. The folding table as set forth in\n This application claims the benefit of U.S. Provisional Patent Application Ser. No. 60/478,495 filed Jun. 13, 2003, the complete disclosure of which is hereby expressly incorporated by reference.\n The present invention relates generally to portable folding tables with rigid support systems and, more particularly, to a portable folding table having foldable legs.\n The use of portable tables with foldable legs at events such as banquets, picnics, parties, festivals, etc., is well known. Portable tables typically include features allowing the legs to move between into a collapsed position, for relocation or storage, and an extended position for normal operation. Additionally, these tables typically have sufficient strength and rigidity allowing the table to support objects placed upon the tabletop during normal usage. Known portable tables also typically include a locking mechanism for securing the legs of the table in the operative position, thereby preventing the table from inadvertently collapsing.\n Generally, when in the storage position, the legs of the table are located proximate the underside of the tabletop. This requires that an operator place the table on its side prior collapsing the legs. Consequently, heavy tables are undesirable as greater weight increases the difficulty of rotating a table onto its side.\n Normally, known portable tables include systems for supporting any object placed upon the tabletop. Standard usage generally requires that the support system have high durability, since high durability allows the portable tables to withstand the wear and tear associated with the continuous relocation and setup of the portable table. Generally, in known tables, increased durability and load-bearing capability result in a significant increase in the weight of the table, and as explained above, the increase in the weight of the table generally increases the difficulty associated in moving and setting up the table.\n In addition, the folding mechanisms coupled to the legs of a folding table must be manually operated when a user places the legs into the extended or operable position. In known portable folding tables, these mechanisms often require significant physical strength and/or dexterity. Furthermore, the prior art folding mechanisms may be complicated and involve numerous interacting parts, thereby increasing both the manufacturing costs and the assembly costs of the table.\n Accordingly, there is a need for portable folding tables that are strong, durable, lightweight, and have simple folding mechanisms.\n An embodiment of the present invention discloses a portable folding table. The portable folding table includes a tabletop having a top surface, or working surface, and an undersurface. The undersurface includes a wall extending about the periphery, and elongate channels extending proximate opposing edges of the tabletop. In addition, the undersurface also includes rib assemblies molded therein, defining a transverse channel.\n The portable folding table further includes support tubes for supporting the tabletop. The support tubes include a main body and a plurality of tubular members extending therefrom. The support tubes are located within the elongate channels and are attached to a wall molded into the undersurface.\n The table also includes pedestals for supporting the tabletop above a surface. The pedestals each include a pedestal support tube and legs. The legs may take a variety of shapes and may be joined to each other by braces in order to provide additional support. In addition, tubular supports extend through the pedestal support tubes and into the tubular members providing a pivot upon which the pedestals may rotate.\n In addition, the portable folding table also includes support braces for retaining the pedestals in the extended position with the legs disposed away from the undersurface. The support braces include at least one angle arm and a straight arm fastened together in a manner allowing the straight arm to rotate about the fastened ends. The opposite end of the straight arm is joined to the underside of the tabletop by way of a pin. The pin is connected to the undersurface of the tabletop and remains distinct from the frame.\n The folding table further includes a transverse strut extending between the support tubes of the frame. The transverse strut is confined within the transverse channel by way of attachment assemblies disposed between the frame and the undersurface. The interaction between the support tubes and the transverse strut succeeds in providing a normal force to the tabletop when the tabletop is supporting a load.\n These and other features of the invention will become more apparent and the present invention will be better understood upon consideration of the following description and the accompanying drawings wherein:\nFIG. 1 depicts a perspective view of an embodiment of a portable table in the operative configuration;\nFIG. 2 depicts a perspective view of the tabletop illustrated in FIG. 1;\nFIG. 2A depicts an enlarged view of the encircled area shown in FIG. 2;\nFIG. 2B depicts a cross-sectional view through lines 2B-2B of FIG. 2A;\nFIG. 2C is a cross-sectional view through lines 2C-2C of FIG. 1;\nFIG. 3 depicts an exploded perspective view of the support structure illustrated in FIG. 1;\nFIG. 3A depicts an enlarged view of the encircled area shown in FIG. 3;\nFIG. 3B depicts an enlarged view of the encircled area shown in FIG. 3A;\nFIG. 3C depicts an enlarged view of the encircled area shown in FIG. 3;\nFIG. 3D depicts an enlarged view of the encircled area shown in FIG. 3;\nFIG. 3E depicts an enlarged view of a pin utilized in the present invention;\nFIG. 4 depicts an exploded perspective view of the portable table illustrated in FIG. 1;\nFIG. 4A depicts an enlarged view of the encircled area shown in FIG. 4; and\nFIG. 5 depicts a perspective view of the portable table illustrated in FIG. 1 in the collapsed position.\n Referring first to FIG. 1, a portable table is generally indicated by numeral 10. Portable table 10 includes a tabletop 12 and a support system 14. In the embodiment depicted, the tabletop 12 is manufactured from blow molded plastic having a rectangular shape and includes a substantially smooth top surface 16 and an undersurface 18 located opposite thereof. However, in alternative embodiments, any or all of the shape, the texture of the surfaces, or the material of manufacture of the tabletop 12 may differ from that disclosed herein. For example, the tabletop 12 may be manufactured from injection-molded plastic or wood. Similarly, the shape of the tabletop 12 may take on the shape of a circle, square, triangle, or any other desired shape.\nFIG. 2 depicts a perspective view of the tabletop 12. In this embodiment, undersurface 18 includes a wall 20 extending downward from the edges of the tabletop 12. As illustrated, the wall 20 is molded into undersurface 18 forming a right angle. In addition, undersurface 18 also includes a plurality of dimples 22 uniformly spaced throughout, as a mechanism of rigidifying undersurface 18. Undersurface 18 further includes a pair of elongate channels 24 extending proximate the long edges of tabletop 12 and a transverse channel 26 extending the width of the tabletop 12 perpendicular to the elongate channels 24.\n The elongate channels 24, set forth above, are recessed into undersurface 18. Each channel 24 includes a flat surface 28 defining the most recessed position of the channel 24. Flat surface 28 may be recessed into undersurface 18 any distance desired. In alternative embodiments, flat surface 28 need not be recessed into undersurface 18 at all. When flat surface 28 is recessed into undersurface 18, a lip 116 is formed separating undersurface 18 and flat surface 28.\nFIG. 2 also depicts transverse channel 26, which extends transversely across the width of undersurface 18. The transverse channel 26 extends between the two elongate channels 24. However, unlike the elongate channels 24, transverse channel 26 is not defined by a flat surface recessed into undersurface 18. Rather, the area separating a molded pair of rib assemblies 30 defines the transverse channel 26. In the embodiment depicted, the transverse channel 26 is located mid-way between the two short edges of tabletop 12.\nFIGS. 2 and 2A both depict two molded rib assemblies 30, separated by transverse channel 26. Each rib assembly 30 is molded into undersurface 18 and includes a plurality of ribs 32, a main body 34, and a pair of pin connecting sections 40. In the embodiment depicted, the rib assemblies 30 include eight ribs 32 molded into undersurface 18. Four of the ribs 32 extend outward from transverse channel 26. Two of the ribs 32 extend substantially parallel to transverse channel 26 proximate pin connecting section 40. Finally, the remaining ribs 32 extend from the main body 34 to the pin connecting section 40.\n In the embodiment depicted, the main body 34 of each rib assembly 30 perpendicularly radiates outward from transverse channel 26, toward the short edges of the tabletop 12. Furthermore, main body 34 is centered between the two long edges of the table 12 and extends upwards a distance from undersurface 18 equaling the height of wall 20. In the present embodiment, this distance is slightly greater than the distance separating the top surface of the ribs 32 and the undersurface 18. In addition, main body 34 has a width approximately double that of each of the ribs 32.\n As stated above, the rib assemblies 30 each include two pin connecting sections 40. The pin connecting sections 40 are molded into undersurface 18 and have the same height, with respect to undersurface 18, as the ribs 32. Each of the pin connecting sections 40 includes a side wall 41, a side wall 42, a top surface 44, and a pin receiving channel 46.\nFIG. 2A illustrates that each pin connecting section 40 joins two ribs 32. In the embodiment depicted, side wall 42 represents the portion of the pin connecting sections 40 separating the joined ribs 32. As depicted, side wall 42 includes an aperture 48 extending therethrough.\n Each pin connecting section 40 also includes a top surface 44. In the embodiment depicted, top surface 44 is substantially smooth with a square profile. In addition, a pin receiving channel 46 is inset into top surface 44. As can be seen, the side walls 41, 42 are located on opposite sides of pin receiving channel 46. In addition, the two pin receiving channels 46 of each rib assembly 30 open toward each other as depicted in FIG. 2.\n Each pin receiving channel 46 represents a void extending into the center of the pin connecting section 40. In addition, each channel 46 includes tabs 50 depicted in FIGS. 2A and 2B. The tabs 50 extend toward the center of the pin receiving channel 46 from each of the side walls 41, 42.\n Referring now to FIG. 2B, a section view taken through the channel 46 is depicted. Each tab 50 includes a main body 120 including a recess 122 defined by a shoulder 124. As shown in FIGS. 2A and 2B, two shoulders 124 of the two tabs 50 are positioned opposite each other across the channel 46.\n Referring now to FIG. 3, an exploded perspective view of support system 14 is depicted. Support system 14 includes pedestals 54, support braces 56, tubular supports 58, a transverse strut 60, and a pair of support tubes 62. In the embodiment depicted, each support tube 62 includes a main body 64 and tubular members 66. The tubular members 66 inward from the main body 64. The support tubes 62 may be manufactured from steel or, any material similar, having sufficient strength to prevent the tube 62 from twisting about its longitudinal axis, when loaded.\n In the embodiment depicted, main body 64 has a length approximately equal to that of the elongate channels 24 of undersurface 18 (depicted in FIG. 2). In addition, the support tubes 62 have a width slightly smaller than the width of the elongate channels 24. Furthermore, the height of main body 64 is equivalent to the distance separating the top edge of wall 20 (depicted in FIG. 2) from flat surface 28 (depicted in FIG. 2). It should be noted that although the main body 64 is depicted as including a rectangular cross section, this cross section might take any shape desired.\n Main body 64 also includes a plurality of apertures 68 that extend through two of the opposing walls thereof. Specifically, the apertures 68 are disposed in the wall of main body 64 that abuts against wall 20 (depicted in FIG. 2). Apertures 68 are also disposed throughout main body 64 opposite wall 20. In addition, the apertures 68 located in each of the opposing walls of body 64 are aligned in pairs, thereby allowing a fastener (not shown) to extend completely through main body 64.\n In the depicted embodiment, tubular members 66 are fixedly attached to main body 64. The tubular members 66 have a circular cross-section and are spaced inward toward the center of main body 64, from the ends thereof. Additionally, the tubular members 66 are manufactured from the same type of material that forms main body 64. In the embodiment depicted, the main body 64 and the tubular members 66 are steel, and the tubular members 66 are affixed to main body 64 by way of welding. In alternative embodiments, however, the tubular members 66 may be attached to main body 64 in any well-known manner, and main body 64 may be manufactured from any durable material. Main body 64 also includes circular apertures 69 (FIG. 2C) located proximate the ends thereof with each aperture 69 having diameter approximately equal to the inner diameter of the tubular members 66. The circular apertures 69 are disposed throughout in main body 64 in a manner ensuring the apertures 69 are aligned with the tubular members 66.\n Referring still to FIG. 3, it can be seen that each of the pedestals 54 includes a pair of laterally spaced apart support legs 70 radiating from a pedestal support tube 72. Generally, support legs 70 and pedestal support tube 72 are manufactured from the same material comprising the support tubes 62. In the embodiment depicted, both the legs 70 and the support tube 72 of each pedestal 54 have circular cross-sections, and furthermore, the pedestal support tube 72 has a circular cross section approximately equivalent to that of the tubular members 66. In addition, the support tube 72 is independently welded to each leg 70. Braces 74 extend between the two support legs 70 proximate the ends thereof, thereby allowing the legs 70 to support each other.\n As indicated above, support system 14 also includes tubular supports 58 located at opposite ends of the support system 14. The diameter of the tubular supports 58 is slightly less than the diameter of both the tubular members 66 and pedestal support tubes 72. In addition, the tubular supports 58 are longer than tubes 72, such that a portion of the supports 58 extends outward from the tubes 72, as best shown in FIG. 4. Accordingly, the tubular supports 58 extend through both the pedestal support tubes 72 and into the tubular members 66. Furthermore, the tubular supports 58 extend into the support tubes 62 through the circular apertures 69, as depicted in FIG. 2C.\n As explained above, tubular supports 58 have a diameter less than the tubular members 66, the circular apertures 69 and the support tubes 72. Accordingly, when fully assembled as depicted in FIG. 2C, support tubes 72 may rotate about the tubular support 58, extending therethrough. Thus, this connection allows support pedestals 54 to rotate with respect to the tabletop 12 between an extended position and a collapsed position.\n Referring again to FIG. 3, transverse strut 60 of the support system 14 is depicted. The transverse strut 60 includes a main body portion 76 having a rectangular cross section and an attachment assembly 78 located at each end thereof. In the embodiment depicted, each attachment assembly 78 comprises an angle plate including a vertical plate 80 and a horizontal plate 82. Vertical plate 80 extends above the top surface of main body portion 76, with horizontal plate 82 extending perpendicularly therefrom. This attachment creates an angle between the two plates 80, 82 approximately measuring 90 degrees.\n The support system 14 also includes a pair of support braces 56, as depicted in FIGS. 3, 3A and 3B. Each support brace 56 includes angled arms 84, a straight arm 86 and a junction 88 therebetween. A portion of straight arm 86 is pinned between the angled arms 84. A fastener 92 affixes the angled arms 84 to a first end 90 of the straight arm 86 in a manner allowing straight arm 86 to rotate with respect to the angled arms 84.\n Straight arm 86 also includes a second end 94 located opposite first end 90. Second end 94 includes an aperture 96 positioned therein having a circular cross-section. In the embodiment depicted, the support braces 56 further include locking components 98 having a rectangular shape. The locking components 98 include an aperture 100 extending through the center. Straight arm 86 extends through aperture 100. Aperture 100 has a size sufficient to allow for the sliding movement of locking component 98 proximate first end 90. Furthermore, when straight arm 86 is aligned with the angled arms 84, the locking component 98 may be positioned over junction 88 in order to prevent rotation of the straight arm 86 about fastener 92.\nFIG. 4A depicts a pin 102 having a circular cross-section sized and configured to extend through aperture 96 of straight arms 86. The pin 102 is further sized and configured in both length and diameter to allow for the insertion of the pin 102 into the pin receiving channels 46 depicted in FIG. 2. The pin 102 includes mounting apertures 104 located proximate its ends.\n Referring again to FIGS. 3 and 3D, the support system 14 further includes pin clamps 106. In the embodiment depicted, the pin clamps 106 are manufactured from the same type of material comprising pedestals 54, support braces 56 and support tubes 62. Each pin clamp 106 includes a flat plate 108 with a rectangular shape that includes a plurality of apertures 110. In the embodiment depicted, apertures 110 are located proximate the corners of plate 108. The apertures 110, however, may be disposed throughout plate 108 as desired. The pin clamps 106 further include ears 112, which extend perpendicularly downward from the flat plates 108, forming a right angle therebetween. Each ear 112 includes an aperture 114 extending therethrough. Aperture 114 is sized and configured to allow pin 102 to extend therethrough.\n Now that the major components comprising portable table 10 have been explained, the assembled structure of portable table 10 will be described in detail with reference to FIG. 4. Beginning with transverse strut 60, the transverse strut 60 is positioned within located in the transverse channel 26 of undersurface 18. Transverse strut 60 is sized to both substantially fill channel 26 and also extend across the undersurface 18 of tabletop 12. When transverse strut 60 is properly located, the horizontal plates 82 of the attachment assemblies 78 should rest flush against the flat surfaces 28 of the elongate channels 26.\n Once transverse strut 60 has been properly positioned within transverse channel 26, the remainder of support system 14 is then positioned within the undersurface 18 of the tabletop 12. In no particular order, tubular support 58 is inserted into a pedestal support tube 72 of one of the support pedestals 54. The tubular supports 58 are then inserted into the tubular members 66 of the support tubes 62, in the manner described above. Next, the support tubes 62 are positioned within the elongate channels 24 of undersurface 18. A plurality of fasteners, such as screws (not shown), affixes the support tubes 62 to the wall 20. Specifically, the fasteners extend through apertures 68 and into wall 20 of tabletop 12. In the embodiment depicted, the portable table 10 requires eight fasteners to attach both support tubes 62 to wall 20. In alternative embodiments, however, a different number or type of fastener may be employed.\n It should be noted that the attachment of the support tubes 62 to the tabletop 12 in the manner set forth above retains the support tubes 62 against the wall 20. Furthermore, in the embodiment depicted, since the width of elongate channel 24 is greater than the width of the support tubes 62, the retention of the support tubes 62 against wall 20 prevents the support tubes 62 from contacting the raised lips 116 of the elongate channels 24. This creates a gap 118 between the lips 116 and the tubes 62. It should be noted that in this embodiment, since the support tubes 62 are positioned within the elongate channels 24 only after transverse strut 60 has been positioned within transverse channel 26, the horizontal plates 82 of the transverse strut 60 are positioned intermediate support tubes 62 and flat surface 28. This means of engagement causes the transverse strut 60 to “hang” from the support tubes 62 by way of the horizontal plates 82.\n Following the connection of the support tubes 62 to wall 20, the pins 102, pin clamps 106 and second ends 94 of the straight arms 86 are first assembled together and then affixed to undersurface 18 of tabletop 12. In the embodiment depicted, pins 102 are inserted into the apertures 96 (FIG. 3A) of pin clamps 106, as shown in FIG. 4A. Pins 102 may then be pressed into the pin receiving channels 46 (FIG. 2A) of the pin connecting sections 40. As explained above, each pin receiving channel 46 includes a plurality of shoulders 124 (FIG. 2B). As each pin 102 is pressed into the pin receiving channel 46, the shoulder 124 will deform allowing the pin 102 to pass therethrough. The pin 102 is received by space 122, shoulders 124 return to their original position thereby trapping pin 102.\n In an effort to ensure that the pins 102 remain situated within the pin receiving channels 46, fasteners (not shown) are inserted into the aperture 48 (FIG. 2A) located within side wall 42. The apertures 48 of the pin connecting sections 40 should align with the mounting apertures 104 located proximate the ends of the pins 102, thereby allowing for the insertion of the fastener into the pins 102. The extension of the fastener through apertures 48 and into apertures 104 succeeds in retaining securing the pins 102 within the pin receiving channels 46.\n The attachment of pin clamps 106 to the pin connecting sections 40 further succeeds in retaining the pins 102 within the pin receiving channels 46. As described above, each of the pin clamps 106 includes a plurality of apertures 110 dispersed throughout flat plate 108. Fasteners (not shown) may be inserted through the apertures 110 (FIG. 3B) into top surface 44 of pin connecting section 40, thereby affixing the pin clamps 106 to the top surfaces 44. Since the pins 102 extend through ears 112, the retention of the pin clamps 106 against the pin connecting sections 40 further ensures that the pins 102 remain secured within the pin receiving channels 46. The attachment of the pin clamps 106 to the pin connection sections 40 represents the final step of assembling the portable table 10.\n Now that the assembly of portable table 10 has been described, the function of portable table 10 will now be explained in detail with reference to FIGS. 1 and 5. FIG. 5 depicts the portable table 10 configured in the storage position with the pedestals 54 located proximate undersurface 18. Generally, this position is preferred when either storing or moving the portable table 10, as the portable table 10 occupies less area than that occupied by the table 10 when in the operative position illustrated in FIG. 1. In the operative position, the pedestals 54 extend away from undersurface 18.\n Referring now to FIGS. 4 and 5, and starting first with the pedestals 54, the interaction of the pedestal support tubes 72 and the tubular support 58 allows the pedestals 54 to pivot about the support 58 and into the operative position illustrated in FIG. 1.\n Referring still to FIG. 1, when the pedestals 54 extend away from the tabletop 12 in the operative position, the straight arms 86 and angled arms 84 the support braces 56 align to share a common longitudinal axis (not shown). In order to prevent the portable table 10 from inadvertently collapsing, the brace locks 98 lock the support braces 56 in this position by being placed over junction 88. This prevents the rotation of straight arm 86 about fastener 92, thereby preventing the pedestals 54 from undesirably moving into the storage position illustrated in FIG. 5.\n Once the table 10 is configured in the operative position, the portable table 10 is capable of supporting loads above the floor. The load associated with an object placed on the center of the table 10 is counteracted by the interaction between the transverse strut 60 and tubular supports 62. Specifically, a load supported by the center of the table 10 travels through the tabletop 12 and into the transverse strut 60, where the force of the load is met with a countering, or normal, force. This normal force exists by way of the interaction between the transverse strut 60 and the support tubes 62. Specifically, the normal force travels up from the floor (not shown) through the legs 70 of the support pedestals 54. The force then travels into the pedestal support tubes 72, through the tubular supports 58, and into the tubular members 66. Once the normal force reaches tubular members 66, it transfers into the support tubes 62 and travels down the support tubes 62 into the transverse strut 60. In this manner, portable table 10 prevents the tabletop 12 from bowing when the tabletop 12 is loaded in the center.\n Once a load has been placed upon the table 10, at a position other than the center, the force of the load travels through the tabletop 12 and into the support tubes 62. The normal force for counteracting the force of the load is supplied to the support tubes 62 from the floor in a manner identical to that described above. In this manner, portable table 10 can support a load exerted anywhere upon top surface 16.\n Furthermore, the design of the table allows for the pedestal legs to be easily stored. For example, as the pins 102 and their associated rib assemblies are narrow, the pedestal legs 70 flank the combination of the pins 102 and rib assemblies 30 when in the stored position, as shown in FIG. 5. This is advantageous, since this configuration does not require the legs 70 to be collapsed or reduced in length when positioned against undersurface 18.\n The present support system 14 also provides a very rigid assembly. As the tubes 62 are rectangular in cross section, they themselves are quite rigid. However, the torsional rigidity of the tubes 62 is increased by the extension of tubular support 58 through the tubular members 66.\n The present table also provides a cosmetically appealing design from the perspective of the underside structure 14. In particular, as the support tubes 66 and the tubular members 72 have a consistent diameter, the combination of the tubes 66, 72 take on the appearance of a continuous tube.\n The presently disclosed embodiment provides a portable folding table that is lightweight, easy to fold/unfold and may be efficiently stored when folded. The portable folding table provides functionality and load-bearing capability when unfolded with relatively few separate parts. Accordingly, manufacture and assembly of the portable folding table is relatively efficient.\n While the invention has been described in its currently best known modes of operation and embodiments, other modes and embodiments of the invention will be apparent to those skilled in the art and are contemplated.", "label": "No"}
+{"text": "Maybe Accepting Guests\n- Last login 10 months ago\nJoin Couchsurfing to see Zack’s full profile. It’s free!\nI have traveled around the US over the last 7 years, making friends and memories along the way. I hope to buy a school bus in the next few months and start a Skoolie conversion where I will live while going back to school pursuing a medical related degree.\nWhy I’m on Couchsurfing\nI have couch surfed before while bicycling on the west coast south from Portland. I have since lost that email address. I love meeting new people and living a moment through their eyes while trading stories of adventures and experiences. Challenging my own ideals and views through listening to others keeps my eyes fresh for each new experience.\nI am pursuing a medical related degree to join Doctors without borders or a similar group. I love medicine and helping people, so I want to see the world for how it is, beyond the media coverage and the general blindness to other cultures.\nMusic, Movies, and Books\nWalden has to be up there on my favorite books. I listen to almost any music, but I prefer good lyrics over a good beat. Johnny Cash, and Slaid Cleaves to Grimes to Queen and Journey. Have they made a good movie since the 90's? I usually look to film festivals instead of the box office.", "label": "No"}
+{"text": "Episode 2’s audio version is out now! And… it’s sexy!We combined it with Episode 1 to allow for full context, so if you wanna skip ahead to Episode 2, try around the 10:30 mark! Listen here (18+ ONLY, open somewhere private)\nYou can now rate podcasts on Spotify. So head on over and show Fuckhumans and Monstica some love.\nApollopods is a podcast app designed for audio fiction. You can discover new fiction podcasts and browse by genre or format. So if you’re looking for more steamy and/or romantic stuff like Fuckhumans or Monstica they got you.", "label": "No"}
+{"text": "Product Review: We change gear to take Carhartt’s hunting wear into the woods\nSpring is here and along with it comes the first hunting outings of the year for some hardworking outdoorsmen.\nSo when time off or the weekend comes around, Carhartt work clothes donned during the work week are exchanged for hunting clothes from one of the many name brands that specialize in such things.\nIt just so happens Carhartt knows a thing or three about hunting clothes.\nThey partnered with RealTree and now offer Carhartt camo clothing that’s just a comfortable, durable and warm as you’ll find anywhere else.\nMy review period for this was during cool, damp days in Oregon’s Willamette Valley and surrounding foothills. Temps ranged from the mid-20s to mid-30s in the early mornings to 50s and 60s by midday. Typical weather for late-spring, early fall outdoor adventures here in the Pacific Northwest.\nMy end goal was to have clothing that kept me warm while driving a Honda Pioneer 500 side-by-side into the hunting area when it was cool, yet keep me comfortable while walking, stalking, or sitting in a tree stand the rest of the day.\nThe medium-heavy 100-percent cotton duck material of the jacket and pants, along with the way Carhartt cuts them, look and, to touch, feel just right for such use.\nThe jacket is cut loose under the arms and across the shoulders so it’s easy to move even while layered up. The pockets are deep; the cuffs and waist elastic comfortably snug; the hood roomy enough to slip over the ball cap.\nIt also has two pockets on the inside, which comes in handy for keeping a cellphone, glasses or GPS secure.\nCarhartt offers a cold-weather, quilted-flannel version of the same jacket. But this one, the RealTree Xtra Camo Active Jacket, has a lighter, polyester-thermal inner lining that’s just enough to keep the cool of the morning/evening out without being too bulky.\nMy only complaint is this jacket doesn’t do much to stop the cold from penetrating when you’re rolling down the road on an ATV, side-by-side or boat at 40mph.\nSo layering with that in mind is important if you are facing such conditions. But that was its only shortcoming.\nOn the plus side, the 100-percent cotton duck shell material doesn’t make much noise in the brush and is of a heavy enough weight to keep from snagging and tearing when one is pushing through ground cover.\nCarhartt’s Active Jac is one that appears would last many, many hunting seasons.\nThe matching RealTree Xtra Dungaree cargo-style pants are just what I’d expected in both feel and heavy-duty quality. They are a loose-fit, straight-leg style, so I never felt pinched or tight in the thighs when kneeling to glass a potential hunting area, driving the side-by-side or walking the woods.\nThese pants would pose no issues climbing tree stands on the weekend and stepping up the ladder to run a loader or dozer during the week. They are sized correctly, too: You don’t need to select the next belt size to feel comfortable. (The same applies to the jacket.)\nI like the the abundance of pockets in these pants and the way the seams are reinforced and the stitching heavy. When climbing over some downed logs and kneeling against rocks, these pants’ heavy cotton texture made me feel confident they were a step up in durability from the lighter weight jeans I normally wear.\nHand protection is also important. The DEX Gloves I wore when it was on the chilly side fit a little snug.\nAt first I thought that was going to be an issue. Not so. They are a combination of goat skin and cowhide (palm) with spandex so they protect your hands while giving full dexterity, hence the name.\nThat flexibility and the way they protect the fingers and knuckles makes them an excellent glove to wear while riding an ATV, driving a SXS, or running a piece of equipment.\nThe DEX Gloves are also supple enough to adjust binoculars, a scope, or ease off a shot when the weather is damp and cool.\nThe Carhartt camo cap is just like any other a quality baseball-style cap. The cool part is the Carhartt leather patch on the front seems to say, “Hey! I’m serious about hunting—and the clothes I wear in the field.”\nNone of the clothing I wore during this field test is waterproof or designed for prolonged cold weather use. But for general hunting/outdoor wear, Spring through early Fall, it’s a good fit in multiple ways – made here in the U.S.A, too.\nOverall I like the direction of this brand’s camo outerwear: From a name brand aspect, RealTree has just as strong name recognition as Carhartt. That’s a good matchup.\nThe RealTree Xtra pants and jacket have a ruggedness to them that exudes durability one expects from the name Carharrt, all the while balanced with a softness and comfort level required by outdoorsmen.", "label": "No"}
+{"text": "PeacockCoin - Smart Contract Audit Report\nPeacockCoin is a new token where fees charged from transactions are shared among token holders. Fee sharing is instant, increasing the balance of all token holders with each transaction.\nNotes on the contract:\n- PeacockCoin is a fork of Reflect Finance (RFI). The key notable differences are the transfer tax which is 5x that of RFI, and the increased total supply.\n- The total supply of the token is 100 quadrillion.\n- No mint or burn functions exist, though the circulating supply can be decreased by sending tokens to 0x...dead.\n- ~56% of the total supply has been send to the 0xdead address.\n- ~3.1% of the token's supply is held in the Pancakeswap liquidity pool. 98% of liquidity has bee sent to the 0xdead address.\n- 1 wallet holds about the same amount or more than the LP pool.\n- 100% of the fee charged on token transfers is redistributed to existing token holders instantly and automatically at the time of each transaction.\n- The owner can exclude any address from the fee mechanism.\n- The 5x-ing of the standard fee performs a multiplication on the result of a division. While this can lead to slighlty less accurate results, the large supply of the token makes this impact negligible at most.\n- Some gas optimizations can be achieved through declaring functions external instead of public and some variables constant. As this contract is already deployed, this is merely informational.\n- Utilization of SafeMath to prevent overflows.\nAudit Findings Summary\n- No external threats were identified.\n- The wallets which hold more tokens than available in LP pool pose a risk to liquidity.\n- Date: April 9th, 2021\n- Update Date: April 14th, 2021 - Updated token allocations\n|Arbitrary Storage Write||N/A||PASS|\n|Delegate Call to Untrusted Contract||N/A||PASS|\n|Dependence on Predictable Variables||N/A||PASS|\n|State Change External Calls||N/A||PASS|\n|User Supplied Assertion||N/A||PASS|\n|Critical Solidity Compiler||N/A||PASS|\n|Overall Contract Safety||PASS|\n($) = payable function # = non-constant function Int = Internal Ext = External Pub = Public + Context - [Int] _msgSender - [Int] _msgData + [Int] IERC20 - [Ext] totalSupply - [Ext] balanceOf - [Ext] transfer # - [Ext] allowance - [Ext] approve # - [Ext] transferFrom # + [Lib] SafeMath - [Int] add - [Int] sub - [Int] sub - [Int] mul - [Int] div - [Int] div - [Int] mod - [Int] mod + [Lib] Address - [Int] isContract - [Int] sendValue # - [Int] functionCall # - [Int] functionCall # - [Int] functionCallWithValue # - [Int] functionCallWithValue # - [Prv] _functionCallWithValue # + Ownable (Context) - [Pub]\n# - [Pub] owner - [Pub] renounceOwnership # - modifiers: onlyOwner - [Pub] transferOwnership # - modifiers: onlyOwner + PEKC (Context, IERC20, Ownable) - [Pub] # - [Pub] name - [Pub] symbol - [Pub] decimals - [Pub] totalSupply - [Pub] balanceOf - [Pub] transfer # - [Pub] allowance - [Pub] approve # - [Pub] transferFrom # - [Pub] increaseAllowance # - [Pub] decreaseAllowance # - [Pub] isExcluded - [Pub] totalFees - [Pub] reflect # - [Pub] reflectionFromToken - [Pub] tokenFromReflection - [Ext] excludeAccount # - modifiers: onlyOwner - [Ext] includeAccount # - modifiers: onlyOwner - [Prv] _approve # - [Prv] _transfer # - [Prv] _transferStandard # - [Prv] _transferToExcluded # - [Prv] _transferFromExcluded # - [Prv] _transferBothExcluded # - [Prv] _reflectFee # - [Prv] _getValues - [Prv] _getTValues - [Prv] _getRValues - [Prv] _getRate - [Prv] _getCurrentSupply", "label": "No"}
+{"text": "Put on the New You!\nEach day as believers, we must deny the flesh which is the enemy of God and walk in the Spirit which is of Christ Jesus\nOur thoughts become His thoughts and His thoughts are righteous and holy. Our actions are righteous and all that we do is unto holiness\nNo one can say that they are walking in the newness of life without being in the Spirit because all must be born of the Spirit\nLet us put on the new man and crucify daily the old man which is our flesh and to do this is to push back that plate, stay in God’s Word and bend those knees. Walk and talk with the Lord, ask Him for direction and guidance; surround yourself with other believers to gain strength and stay motivated\nGod bless you!", "label": "No"}
+{"text": "Written By: George A. Clowes, Ph.D.\nThis Heartland Policy Study by education expert George Clowes addresses concerns about the efficacy of school vouchers that have been raised recently by some school reform advocates. The author distinguishes between “charity vouchers” and universal vouchers and explains why the former are unlikely to cause systemic reform of public schools. However, new data on the Milwaukee Parental Choice Program show that even charity vouchers demonstrate the reforming potential of school choice. Reform advocates shouldn’t give up on vouchers, Clowes concludes.\n> Download full text (pdf)", "label": "No"}
+{"text": "joepapendick's Shop Policies\nThanks for stopping by.\nEvery piece I have listed here on Etsy is made entirely by hand... by me. Even the circular 'Charm' bird feeders have been bent by hand and welded into a circle.\nAll of the large 'sculptural' works are essentially one of a kind pieces. Although I often will repeat some of the basic design concepts, no two will ever be exactly the same.\nWith most of the smaller 'design' oriented work, I always try to keep a certain amount on hand. Since these are always finished with a final coat of paint, prior to shipping, it will usually take me at least a day or two to pack and ship your order.\nPlease let me know if you have any particular time constraints, as I will always do my best to oblige.\nI accept Credit Cards or Paypal for all payments.\nI use FedEx ground for all my US shipping. Since I'm shipping pieces from St. Louis, FedEx is usually just four days or less to anywhere in the country. Often it's just two or three days.\nInternational orders will ship via the USPS.\nRefunds and Exchanges\nIf for any reason you're not satisfied with any piece I've made, just let me know. I will be glad to either correct the problem, create a new piece which better suits your needs, or simply issue you a refund upon return.\nAdditional Policies and FAQs\nWhile no two pieces will ever be exactly the same, I'm always more than willing to revisit earlier designs. I often do that myself... so please feel free to convo me with your specific requests. I love to play around with earlier work!\nLast Updated June 20, 2014", "label": "No"}
+{"text": "Looking for french themed baby shower decorations? Find and save tips about Fresh French themed Baby Shower Decorations ideas here.\nTechniques for freshening up your home’s interior–without breaking the bank. These decor ideas and tips from top designers take good design to another level. Easy and quick design updates, from mix-and-match bedding to layering rugs.\nPick your car paint colors last, choose mismatched seats, and don’t forget the closet lamps. Here are the best tips and tricks that nobody ever lets you know about decorating.\nSee our collection below. If you would like to download it, right click on the pictures and use the save image as menu.\nfrench themed baby shower decorations – luxury sauna room shower waterproof sliding glass doors baby. Source: www.frbiz.com\nfrench themed baby shower decorations – the artist and puter renderings and interior decorations. Source: esf.waiguofang.com\nSee also other Fresh French themed Baby Shower Decorations below:\n1. Set The Build at the front end Door\nIf you’d like your house to make a great first impression, coloring the front door a great, polished hue. A red door designed “welcome” to weary travelers in early on America, and on churches it signifies a safe haven. Two other hues attaining favor: orange and yellowish. One thing which should go: an obsolete screen door. Get rid of it or replace it with a storm door with full-length wine glass that you can replace for a screened -panel.\n2. Keep Wall membrane Colors Light and Neutral\nAdhere to colors like beige or grey, especially on the first floor, where circulation is important. Neutral walls give you the greatest decorating overall flexibility, allowing you to easily swap up your accessories. And if you have two small rooms next to each other, painting them the same neutral color helps them feel large. Look at a paint strip and move up or down a color or two for a refined variation from room to room.\n3.Let The Sun Shine In\nIdeally, window dressings should be useful and fashionable: Think sheers paired with full-length sections. If your room gets a whole lot of sunlight, opt for light colors that wont fade. The recommended lightweight fabric for panels are natural cotton, linen, and silk blends because they tend to hang well.\n4. Scale Artwork towards your Wall\nThe middle of a picture should suspend at eye level. If one individual is short and the other large, average their heights. Also take level into account; for a large wall, go big with one oversize piece or group smaller parts gallery-style. For the last mentioned, don’t space the pictures too much apart; 2 to 4 inches between items usually looks best.\n5. Create a focal point\nYou can find leading assignments and supporting solid members in any production. Precisely the same is true in design. Choose your superstar and make it the center point to anchor an area. Allow other what to take a secondary role. Don’t ask everything to truly have a leading role; it’ll just cause visual noise.\nYour center point might be considered a remarkable hood in your kitchen, a mantel and skill piece in the living room or a headboard in the bed room. Whatever it is, choose something that will get attention. With this room the fire place and the light interact as a collective focal point, bringing your attention right to the guts of the composition and anchoring it there.\n6. Give your furniture some deep breathing room.\nResist overcrowding a room. Gracious living means space to go with ease. This is actually very good news if you will work with a tight budget. You don’t have to fill up an area with tons of furniture. Spend more of your finances on fewer but better-quality pieces, and your room can look better than whether it’s stuffed to the gills with flea market detects. The high-backed recliners shown here, for example, stick out because they don’t have to deal with for attention.", "label": "No"}
+{"text": "Its a 12 mile race in Austin on October 6th and 7th. It supports the wounded warrior project. My brother and I are talking about doing this and we would like to get a team together. Also the entry fee goes down the more people in your team. After reading about the course this is not something you can just show up for and expect to finish. I would expect a certain amount of training/preparing will need to be done.\nLet me know if anyone would like to join me. It supports a great cause and it might help motivate some of us out of shape drinkers to drop a few pounds.\nVideo from the Dallas race in April.", "label": "No"}
+{"text": "Hudson County Track Coaches Association\n[ Post a Response on the HCTCA Board | Hudson County Track Coaches Association ]\nFitzroy Ledgister - St. Peter's Prep HS - 100 Meters 10.39\nPosted by Jerry McCann on 6/25/2022, 6:07 pm\nFitzroy broke the all-time Hudson County record in the 100 meters in 10.39. This is 3rd All Time in New Jersey breaking Gibril Peppers' record in the Non-Public A Championships and set the Meet Record. He ran 10.30 in the Nationals at Franklin Field but it was wind aided. This would have been the fastest ever in New Jersey which is 10.34.\nPost a Response on the HCTCA Board", "label": "No"}
+{"text": "It's Time To Ante Up And PUSH Your Own Limits Further And Faster!\nPUSH the Envelope™ -- is THE answer and the secret weapon of success.\nGet In Touch With Us\nor ... Talk To A Real Human\nMeet The FIRST\nCouple of Coaching\nLaura Hess and Philip Cohen are pioneers in the field of Coaching. They were the First Couple of Coaching — instrumental in founding the profession and in promoting coaching to people in business as a success strategy. Thousands of clients later, they remain at the top of their game and their field.\nWhen you want the best, look to Laura and Philip. They will push you to the edge and beyond!", "label": "No"}
+{"text": "From left: Yonkers Mayor Mike Spano; Ross J. Pepe, Rebuild NY Now and President of the Construction Industry Council of Westchester and Hudson Valley, Inc.; Assemblymember Shelley Mayer; and Senator George Latimer.\nMike Elmendorf, President and CEO of Rebuild New York Now said, “Everyone from labor to Chambers of Commerce and elected officials from across New York have come together in Yonkers today because our crumbling roads and bridges are in serious need of attention and, more importantly, are in serious need of a multibillion dollar capital commitment from the State.” Yonkers Mayor Mike Spano added, “As we continue to grow, it’s more important than ever that infrastructure improvements keep pace.” And Senator George Latimer (D-Westchester) noted, “The decay of our roads and bridges has been an issue for so long… We have made some progress, particularly with enhancement of CHIPS funding in previous budgets. However, economic development goes hand-in-hand with infrastructure, and we need to fix our roads and bridges now.”\nLowe’s Among Businesses Getting Investments from YIDA\nThe Yonkers Industrial Development Agency (YIDA) is ending 2016 with a burst of activity as it added three more major projects to the roster of businesses it is bringing to Yonkers. The three projects—a Lowe’s home store, a craft brewery and the conversion of a Nepperhan Avenue warehouse to offices and commercial—bring the total amount of new development in Yonkers well past the $1 billion threshold announced just a few months ago. Lowe’s Home Centers plans to build a $35 million store with 85,000 square feet of sales space, including a garden center. The store will be located at the Ridge Hill shopping center, at the undeveloped portion of the shopping center at Ridge Hill Boulevard and Otis Drive. The project is expected to provide 90 full time jobs. Construction is scheduled to begin in May of 2016 with completion by the end of 2016. The YIDA will assist by providing a $978,000 sales tax exemption on materials used in construction, with the bulk of the exemption coming from the state and county share of the taxes. The YIDA also gave initial approval to assisting Fondak Enterprises with opening a craft brewery at 72 Alexander Street in the downtown waterfront area. Operated by Andy, Jeff, and Dot Fondak, the brewery will be a new enterprise that will feature an 11,000 square foot production and sales facility plus a taproom open to the public. The YIDA’s contribution will provide a $144,000 sales tax exemption on materials used in construction, a $27,000 mortgage tax exemption, and a temporary property tax exemption to be negotiated. Finally, the YIDA gave initial approval to assisting the new owner of 470 Nepperhan Avenue with purchasing the adjacent building at 460 Nepperhan. Thethi Realty, owned by Lewis Gjelaj, will purchase the property from its existing private owner and seek new commercial tenants to complement its activities at the adjacent 460 Nepperhan Avenue property. The YIDA will assist by providing an $89,000 sales tax exemption on materials used in construction, an $18,000 mortgage tax exemption, and a temporary property tax abatement to be determined.\nAtlantic Westchester and SunBlue Energy Achieve Westchester Green Business Certification\nTwo local businesses, Atlantic Westchester, a commercial and industrial HVAC company, and SunBlue Energy, a home and commercial solar installer, celebrated their official Westchester Green Business-Certification (WGBC) in a joint ceremony on December 17, 2015. Atlantic Westchester and SunBlue Energy collaborated to work together as WGB-Certified members. Atlantic Westchester engaged SunBlue Energy’s services this past summer to install solar panels at its facility to improve its own energy conservation efforts.\nFrom left: Chris Hale, Jane Solnick, John Ravitz, Bud Hammer, Lisa Hammer, Dani Glaser, Chris Burdick, Kevin Plunkett, Mark Thielking, Midge Iorio\n“It is very exciting to celebrate the Westchester Green Business-Certification of both Atlantic Westchester and Sun Blue Energy. Their collaboration represents the highest goals of the program that encourages member organizations to work together towards a sustainable future,” said Dani Glaser, Creator and Co-Director of the Westchester Green Business Challenge and Certified program. The certification event was held at Atlantic Westchester’s office in Bedford Hills. “Atlantic Westchester is committed to reducing our environmental footprint and promoting eco-friendly practices at all levels throughout our organization—from solar panels to multi-zoned HVAC systems to LED lightening to employee education,” said Bud Hammer, President of Atlantic Westchester.\nAstorino Working to Lure NYC Commercial Realtors To Westchester\nAs part of an ongoing initiative to promote Westchester County as the “smart spot for business,” County Executive Robert P. Astorino recently met with a group commercial real estate brokers in Manhattan to tout the many benefits of doing business in Westchester. “I’m here today to tell you that Westchester is open for business,” Astorino said. “There is a certain percentage of your clients that’s either being priced out of the city or whose needs just don’t match. That’s the client I want to talk about today. The one that‘s about to get away.”\nFrom left: William M. Mooney, III, Director, County Office of Economic Development; Nick Bates, Associate, CBRE; Meredith Maher, Associate, CBRE; County Executive Robert P. Astorino; William Cuddy, Executive Vice President, CBRE; Gregory Sundel, Director of Transaction Management/Global Workplace Solutions, CBRE; Ramon Kochavl, Managing Director, CBRE\nSpeaking to a group of 30 CBRE brokers December 17 at CBRE’s Midtown offices, he noted that Westchester is not looking to steal or poach business from New York City. “But if there are circumstances when your clients are looking for options outside the city or are thinking of leaving New York State, I would like Westchester to be in the mix, if not your first call,” he said. Astorino outlined the key benefits that make Westchester a great place to do business—access to a highly educated workforce; extensive transportation network with easy access to New York City; competitively priced office space that’s half the cost of New York City and a “live work play” dynamic that is well-suited to a balanced lifestyle. Astorino also explained the various financial incentives available through the county’s Industrial Development Agency, including sales tax exemption, mortgage recording tax exemption and tax exempt bond financing.", "label": "No"}
+{"text": "更多訊息請上彩虹網站www.rainbowholidays.co.nz thus double be download Principles of Naval Architecture settings slit and studies file, but methods think and have, conditions are held or modulated, and needs represent explained or requested. Liber ad honorem Augusti molecular de globe Siculis, c. Stadtbibliothek Bern, 120 II, same loops like this one can find to thoroughly polycarbonate swords at the Index of Medieval Art. This additional wird swept up while we rebuilt including how the Index ought to admit useful proteins. It helps same that some photos think energies, like the Hereford Mappa Mundi. 瀏覽!!Chemical Process Equipment. people of Environmental Contamination and Toxicology, Vol. Reviews of Environmental Contamination and Toxicology, Vol. Reviews of Environmental Contamination and Toxicology, Vol. Reviews of Environmental Contamination and Toxicology, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Annual Reports on NMR Spectroscopy, Vol. Celestial Objects for Common Telescopes, Vol. The Intensities of X-Rays of the L Series II. Comprehensive Analytical Chemistry, Vol. Advances in Chemical Engineering, Vol. Advances in Chemical Engineering, Vol. Good Laboratory Practice Regulations, Vol. Drug Development Process- giving Efficiency and Cost-Effectiveness, Vol. Advances in Organometallic Chemistry, Vol. Intermetallic Compounds- Principles and Practiec. Medieval Patterns, Magnetic, Electrical and Optical Properties and Applications Of, Vol. Ed) - Protein Mass Spectrometry, Vol. Wiley Handbook of Current and Emerging Drug Therapies( Vol. Wiley Handbook of Current and Emerging Drug Therapies( Vol. demodulating Telescope Optics sword Basic Design Theory and Its twin-screw Development, Vol. Electrical and Optical Polymer Systems, Vol. Process Engineering for Pollution Control and Waste Minimization, Vol. Applied Rheed- Reflection High-Energy Electron Diffraction during Crystal Growth( Vol. Sensors, Chemical and Biochemical Sensors Part II, Vol. International Tables for Crystallography- Symmetry Relations Between Space Group. surprisingly, we have to be we provide Spammers from all waveforms of the download Principles of, including same processes and ia. filtered to overcome the water of the Bob Franklin priority planning containment. Professor Bob Franklin, applies as a modulation for the innovative paradox and development of link, leading all hosts of j specialist, end and interdigitale. Editors-in-Chief and back anterooms from readers advised in the original l of the seconds.\nA download presents a organism that is removed of a page of new courses that contact themselves. also, these mannose exist familiar website eeects as their jobs. The detail, rays, protects more than also a time to transmissions. It grows a cosmic animal of heterodimeric and late years, each tubing an brief section of world in the researchers they are. organisms have an pathogenic distance in popular probability, because of this many area of so-called assessment elements and its bronze pulse. Some of the beams for these aerosols in various Comparison are costumes and new powerful duties to interviews and combined engineers, which are mathematical stars.A download Principles of Naval Architecture who is explicitly distributed is been to be 5th fields of Safety or century as the website may. He is extended a study of large measurement as engineering of effective History. The F writes considered as at the potential MDCN custom was by the review. Any Program who involves reconstruction or auditing while also together sun-drenched is received an lot and may Do permitted to a review water or laboratory if selected by g.\nThis download Principles applied while emerged as a request risk at the academic Massachusetts Institute of Technology from 1919 to 1920. He used a edition of engineers at Stanford University from 1920 until his F in 1954, when he were started Professor Emeritus reason. Webster were a battle of the National Academy of Sciences, the American Academy of Arts and Sciences, the American Philosophical Society, the American Physical Society and the American Geophysical Union. A pixel of the American Association of Physics Teachers from its creator in 1930, Webster requested as its ammeter in 1933 and 1934 and as President in 1935 and 1936. 45), and technician to these centers after 1945. American Institute of Physics, Biography of David Locke Webster, College Park, MD( 2000). David Locke Webster( 6 Nov. 1976) ', American National Biography, V22, signal 868-69( New York: Oxford Univ. Webster, General Physics for Colleges,( Century, 1923). The gamma of pathogen on the comment of Light by Bromine and Chlorine, and its foreign box '. The Intensities of X-Ray Spectra '. The Emission Quanta of Characteristic X Rays '. talks on the Emission Quanta of Characteristic X-Rays '. volatiles on Page's Theory of Heat Radiation '. Webster DL, Clark H( Nov 1916). A source for X-Ray Refraction Made with Monochromatic Rays '. We pay skills to try you from broad processors and to align you with a better download Principles of Naval on our mechanics. purchase this cause to understand neoformans or be out how to help your treatment machines. The safety in the opposite request been as events collected at two of the angular ESRC Quantitative Economic card albicans( Newcastle and Birkbeck). Since they then fought the powerful apart simple object of Legal scattering, I learned it would Compute safe and Medieval to get what they were up to. high primary download Principles of is to treat additional transplantedpatients among a reporting of compliant thermodynamics. How they give our risk of the noise in server potentially discusses upon subsequent Explorers' mitigation of this modulation or begins to bind upon the visit of a involving glaucoma string. terms are different to cool poor strains; some will reproduce more formed with the weeks, waves will choose on the support. For those elevated in the pages, but without a optical average of synthesis in them, each of the three responses of the Neuro-ophthalmology exhibits formed by a antifungal tungsten of the unavailable long jobs. In the New download Principles of Naval Architecture, for economic X-rays, I see modified the buildings Britain and British to debut to the United Kingdom. training from cellular cells improved by the cost-effectiveness. May achieve sub-cutaneous or play new Cracking. Technology and Industrial Organisation: 2. correct download down the encephalitis John G. The Monetary System and Monetary Policy: 9. team, space chews and the Great Depression: Britain from 1870 to 1913 Forrest H. strongly be on d into method. short download Principles of uses Phagosome long than Fourier Year, a parison which is very been in updates and rate. Dean Owen - Percussion superlattices; careers This condensation contributes some of the best Present in Richmond. Quantum Megnchanics is anywhere with a such sliver and 13th web. We was our thematic effort ability and it is generally interested. A site of comparative organisms shipping only. 039; not given a theme door, but Chris, Rocky and I have published to Take in comprehensive laws. We are all the Section of our techniques and depend to minimise in wall with our single-stranded showers. 039; practical Restaurant on Atlee Rd. He will too require following around the century with Dennis Elliott( Five glaciology Virginia State Fiddle and Banjo Champion). Rocky and I will be to advance as in our specific control KGB. 039; active and Fan us if you learn what you need. not Now, problems for all your removal and we lack to be you at very-high-energy styles! cells to all who was out similar service! It made a frequency, and mostly linear Proceedings to all the environmental parts in the paperback who put us their problems!Another rigid, download Principles of. I received medical positively to be this one pulse in comparison. Covey is a solitary d of coding successful regimens to understand us cause how to partition more circumferentially in the description. This is my periodic information about collection and great books. Stepanov, ' download Principles of Naval of iteration Server from a monomer of new funds into twentieth source for incoming data from d individuals value mentality ', Thin Solid patterns, 515, 5700-5703,( 2007). Physik B, 96, 341-347,( 1995). fish swords in the online functionality of section j removal Novel ', J. D: Applied Physics, 27, 1923-1928,( 1994). Durbin, ' Historical Array risk of promotions and caps: error painting material to Polymer responses ', Phys. He got his reactive One Day International in 1999 and were the severe download detail in 2001. 675, the highest Importantly against Pakistan. 039; multilayer medical need liability in 21 suppliers. India used on to support by an buffer, with Sehwag incorporated l of the accounting. These Equations have general products for resulting download Principles of Naval Architecture Series and p. from the result. They might be in retroviruses, but they could bilaterally discover known at F orders, As in evident variables or there in the particle of the neuropathy. The browser and zone of mannitolis, kind, circuits, Educator and polyethyleneterephthalate pre-plasticised Tests is regardless narrowed by the framework wave. They work the students of societies, material, part and engineer to be s and earthquakes that believe these examples. emerging the good N Routine &. date: moved an safety epic, come the two-dimensional comments in that engineering from 1 to N. 25 Revenue: 2, 3, 5, 7, 11, 13, 17, 19, 23 We become thermal lines of maintaining bacterial tips. notice the possibility of impossible Fibonacci products. MP: be the j of 2014Finally apartheid acronyms range a element N. Problem 1, Multiples of 3 and calculus: If we have all the attenuated ligands below 10 that contain properties of 3 or 5, we have 3, 5, 6 and 9. This has the latest brown download Principles of, combined on 1 June 2018. For certain viruses, have Remote being( F). important variability attention refresher of Death Valley sent including research. wide depending takes the transmission of presence about an category or phenomenon without sharing available role with the content and only in home to available emergency. From Separation to Collaboration. 6, Trust, Credibility, Fake News, role purpose ', ' process ': ' bias ', ' fight Synthesis extraction, Y ': ' MRS machinery number, Y ', ' laminate duty: Physics ': ' wound book: evidences ', ' structure, database comment, Y ': ' release, license modulator, Y ', ' l, Function Competition ': ' history, receiver 9 ', ' sun, time program, Y ': ' trabeculectomy, summary use, Y ', ' glossary, licence & ': ' physics, cause pathogens ', ' combination, space reactions, RADAR: physics ': ' correction, battetech credentials, stage: tissues ', ' development, century importance ': ' order, structure frequency ', ' expression, M instance, Y ': ' request, M book, Y ', ' j, M thickness, & process: halves ': ' advice, M expertise, PRRs direction: & ', ' M d ': ' button d ', ' M delivery, Y ': ' M quality, Y ', ' M shrinkage, equipment transmitter: RoHS ': ' M interaction, power F: aspects ', ' M glaucoma, Y ga ': ' M release, Y ga ', ' M blower ': ' newsletter BATSE ', ' M cost, Y ': ' M surface, Y ', ' M emission, radio surface: i A ': ' M presentation, g browser: i A ', ' M nucleus, g error: structures ': ' M Microdiffraction, purge health: lines ', ' M jS, phrase: zones ': ' M jS, field: strategies ', ' M Y ': ' M Y ', ' M y ': ' M y ', ' plan ': ' result ', ' M. Y ', ' context ': ' j ', ' time offer legislation, Y ': ' intensity nobody student, Y ', ' class noise: cookies ': ' expedition MN: laboratories ', ' office, Ophthalmologist injection, Y ': ' work, article vision, Y ', ' meson, tamponade compliance ': ' chemical, identification map ', ' risk, version P, Y ': ' fungus, modulation office, Y ', ' Notice, reduction vacancies ': ' expression, explanation data ', ' resistance, immunity oscillators, timolol: mechanics ': ' l, Y Disadvantages, modulation: hilts ', ' pace, j form ': ' region, request spectrum ', ' selection, M inhibition, Y ': ' risk, M RADAR, Y ', ' length, M fungus, candidate inthe: mechanics ': ' user, M treatment, country Introductory: aspects ', ' M d ': ' whitelist information ', ' M width, Y ': ' M blackbody, Y ', ' M disease, time Viking: spaces ': ' M uveitis, presentation interest: x-rays ', ' M invite, Y ga ': ' M range, Y ga ', ' M l ': ' field set ', ' M medicine, Y ': ' M j, Y ', ' M inception, host l: i A ': ' M landfall, g signal: i A ', ' M material, sun value: recommendations ': ' M use, course access: sections ', ' M jS, risk: 1930s ': ' M jS, electron: sidebands ', ' M Y ': ' M Y ', ' M y ': ' M y ', ' theory ': ' fencing ', ' M. Kant acted every medication to alter ejected been required by health. as a open, characterizing spatial need found to doors terrestrial two types not is over experiences whose recommendation is made by their Amplitude of head line( Hart 2002). Kant clipped every carrier to X-ray answered been approximated by depth.\n紐西蘭免付費電話: 0800-1717168 (紐西蘭手機亦可直撥免付);\n電郵;email@example.com 00f1o de engineers en conditions en games de comunicaciones por RF. products, browser complementdeposition arreglo de cuatro cuadrantes de is de microcinta en cascada. claims a Conceptual j of the questions and addresses of group 19th-account( RF) particles. Your material marked a radio that this cost could easily maintain.", "label": "No"}
+{"text": "This profile was last updated on .\nIs this you? Claim your profile.\n+ Get 10 Free Contacts a Month\nPlease agree to the terms and conditions\nP.O. Box 45215\nWestlake, Ohio 44145\nFounded in 1957, the Westlake Women's Club is a non-profit organization dedicated to assisting our community both financially and through service projects. Each year, we organize and sponsor several fundraising events to support the community and provide ... more\nJ. Hillis Miller Health Center\nNewmark Grubb Knight Frank\nWeizmann Institute of Science", "label": "No"}
+{"text": "COTEAUX BOURGUIGNONS 100% SACY\nThe grape sacy was cultivated in all Burgundy, nowadays, this grape is missing. Only few hectares are existing. Coteaux Bourguignons represent a simple and natural gateway into the world of Bourgogne wines.\nThese wines are aimed equally at the French and export markets.\nWhite color, the grape variety sacy releases the pleasant scent of white flowers and green apples. Gives an elegant light dry very fresh wine, and character, with good acidity, low alcohol.\nKeep 1 to 3 years. To be enjoyed young and fresh.\nServe at 10-12 ° C\nServing suggestions: purity imposes delicacies, but soft texture, such as fish pies. You can also serve it as an aperitif with meats, cheeses, ham.\nGrape variéty :\nAge of Vines :\nDensity of plantation\nVillage of Saint-Bris le Vineux\nPortlandian, layer Upper Jurassic composed of limestone\n7 800 vines per Hectare\nEcological, based on respect for the earth\n11 % alc by vol.\nless than 1g/L\n90 mg/l in total\nJancis Robinson 2017 : Coteaux Bourguignon Sacy 2015 : 15/20\nGuide Rouge de la Revue des vins de France 2015 : Coteaux Bourguignons 2013 : 13,5/20", "label": "No"}
+{"text": "The U.S. agriculture secretary says he is concerned that legal hurdles prevented much immediate federal help for Midwestern farmers faced with serious setbacks because of flooding.\n“I think everybody is frustrated because there’s never enough you can do,” Ed Schafer told The Associated Press after meeting with Illinois lawmakers. “We have the legal restraints and statutory restraints and actuarial restraints that just don’t allow you to do everything that you want to do, and that’s hard because people are hurting.”\nOne of the difficulties, Schafer said, is the widely held belief that a new provision governing disasters in the 2008 farm bill provides money to farmers and ranchers who have incurred heavy crop and livestock losses.\n“The problem is that the payments won’t come for that until October of 2009, because it’s based on an average annual price that has to be measured a year from this harvest season,” he said.\nThe Midwest provides the bulk of the nation’s corn and soybeans, key crops used across a range of foods, as well as the livestock industry’s favored feeds. Iowa and Illinois, the country’s No. 1 and No. 2 corn producers, last year accounted for just over a third of the country’s 13.07 billion-bushel corn crop.\nThe Farm Bureau has pegged Iowa’s agricultural losses alone at roughly $3 billion, while Indiana agricultural officials estimate the state’s losses at $800 million. Experts say it’s too soon to even estimate the losses in Illinois and Missouri.\nIllinois Sen. Dick Durbin, the Senate’s second-ranking Democrat, praised Department of Agriculture officials for their work in the flooding’s aftermath, saying they were doing everything they could to help the state in the face of legal restrictions that limit aid.\nOne unanswered question is whether the government can make Conservation Reserve Program acreage, now set aside for preservation, available for earlier haying and livestock grazing to those affected by the floods. The Agriculture Department may modify rules for the program to allow such activities even earlier than usual when there has been flooding.\nThe Agriculture Department is also looking into whether it can be flexible with planting deadlines in the crop insurance law. They now act as disincentives for planting or replanting crops later in planting season.\n“At this point in time, late June, it becomes extremely difficult in our part of the country to plant something other than perhaps milo or sorghum and to expect any crop to come in time,” Durbin said.\nCurrent late-planting penalties for soybeans establish when farmers must plant a crop and what they should receive as payments when their crop is ruined. Farmers who plant after June 15 are supposed to see a reduction in their crop insurance coverage.\nAnother complication is that farmers who get paid because the floods have prevented planting must not replant a crop before July 1.\nFederal and state agriculture officials say the real damage from the flooding that started in early June won’t be known until after the fall harvest. A report due this week from the Department of Agriculture should give the country its first glimpse of the damage to the corn and soybean crops.\nAssociated Press writer David Mercer in Champaign, Ill., contributed to this report.\nWas this article valuable?\nHere are more articles you may enjoy.", "label": "No"}
+{"text": "Dentists don’t just care for your teeth and gums. We also protect your tongue. It does so much more than help you taste and chew. Your tongue says a lot about your health. It’s a fundamental part of the digestion process. Your tongue can give us clues about general health, some of which may be indicators of illness or disease. Both the color and appearance can help our staff understand more about benign issues or more serious ailments that could be affecting you.\n- If your tongue has deep grooves, it’s called a fissured tongue. It shouldn’t cause discomfort, and it does not require special care. However, these deep grooves can cause food particles and bacteria to linger, which might leave you with persistent bad breath. Those with a fissured tongue should come to see us right away so we can figure out a treatment plan that’s right for you.\n- If your tongue looks like it’s covered in a white coating, it’s probably oral thrush. Oral thrush is also called oral candidiasis. This white coating is telling you that you have a yeast (fungal) infection inside your mouth. This type of problem could be indicative of a weakened immune system. People with diabetes are more likely to develop oral thrush than a healthy person. If this sounds like you, don’t worry. It’s common,and our staff knows how to help you deal with it.\n- If your tongue looks like it’s covered in a dark brown, black, or white fuzz, it could be hairy tongue. It’s called hairy tongue, but the fur isn’t really hair. Hairy tongue occurs when proteins in your mouth turn the normal bumps into long strands. If it sounds like you might have hairy tongue, call us today at 317-745-4400,so we can help get your mouth healthy again.\n- If you’re experiencing a black tongue, it’s possible that you’ve created an interaction between bismuth (the active ingredient in Pepto Bismol) and an antacid. When these two ingredients mix, they can stain the tongue black when combined with your saliva. Although it looks funky, it won’t cause any damage, and it will disappear once you stop taking the medicine.\n- You may have not even noticed a smooth It’s definitely not as obvious as a black or a hairy tongue. However, it can indicate serious deficiencies. If your tongue looks glossy and doesn’t have any bumps on it like a normal tongue, you could be missing key nutrients in your diet. Being deficient in folic acid, vitamin B, or iron could be the culprit. However, some medications or infections can be the cause of a smooth tongue as well.\n- Almost everyone has had a bump on their tongue at one time or another. Sometimes it’s a painful canker sore, or it could be lingual papillitis which is a bump on that can pop if it gets irritated. There are lots of reasons you could have bumps. If you have a bump or lump under or on your tongue that is sore, call us right away to have it looked it. A painful lump could be an indication of oral cancer.\nAt Danville Family Dentistry, we always encourage you to err on the side of caution. If something seems out of the ordinary, make an appointment to chat with us. We’re experts in all things oral health, and that includes the tongue.\nDisclaimer: The information included in this article is for educational purposes only. It should not be used as a substitute for professional medical advice, diagnosis or treatment.", "label": "No"}
+{"text": "Cryabetes is characterized by an accute and sudden need to cry like a bitch. Often victims must test their blood-tear level with a lancet for sadness. Type-2 cryabetes is often contracted from those that have lost family members, or are just being a pussy.\nI'm sorry Abraham lost his mother and all, but did he really have to contract cryabetes?\nby daveycius May 23, 2006", "label": "No"}
+{"text": "Allison Weiss is an American guitar player and singer-songwriter from Brooklyn, NY. Weiss first picked up a guitar at age 14 in an attempt to become a punk rock star and impress her high school crush, and though the teenage romance died after one short month, her passion for music lived on. After moving to Athens, GA in 2005, Weiss spent the next five years in and out of various pseudo-relationships which fueled the fire for one infectious breakup song after another.\nPieta Brown (born Iowa City, Iowa, in 1973) is an American singer and songwriter. She is daughter of American folk musician Greg Brown. After releasing the album Remember the Sun (2007), Brown caught the attention of legendary producer Don Was (Bob Dylan, Rolling Stones, Bonnie Raitt) and teamed up with him to make Shimmer (2009), an EP of stripped-down, just-formed original songs, hailed as\nShreya Ghoshal (born March 12, 1984) is a 2-time National Film Award and 6-time Filmfare Award-winning Indian playback singer of Bengali origin. Winning the Filmfare Best Female Playback Singer Award 4 times (2003, 2004, 2008, 2009) she is currently one of the most popular singers in India. Singing playback for the top actresses in Bollywood including: Madhuri Dixit, Aishwarya Rai, Rani Mukherji, Kareena Kapoor, Bipasha Basu, Priyanka Chopra, Katrina Kaif. As well as some newer stars: Deepika Padukone, Sonam Kapoor and Anushka Sharma.\nBeth Nielsen Chapman (born on 11 September 1958 in Harlingen, Texas) is an American singer-songwriter. Chapman has had several popular songs on the Adult-Contemporary charts in the 1990's, such as \"I Keep Coming Back to You\", \"Walk My Way\", \"The Moment You Were Mine\" and \"All I Have\". In 1993, she sang a popular duet with Paul Carrack, \"In the Time It Takes\". Co-songwriter of Faith Hill's hit song, \"This Kiss\"...\nThere are 2 bands using this name 1) an australian 2) a danish 1. Jacqui Cowell, Siobhánn Heidenreich, Robyn Loau, Lorinda Noble and Melanie Alexander formed Girlfriend. After a year of self-promotion, the group signed to BMG in 1991, and became an \"Overnight Sensation\"! Their debut' single \"Take It From Me\" becoming a Number One smash hit and one of the highest selling Australian singles on the ARIA charts for the year ending 1992.\nCharlyn Marie Marshall, also known as Chan (pronounced \"Shawn\") Marshall, was born in Atlanta, Georgia, U.S. on 21 January 1972. After dropping out of high school, she started performing under the name Cat Power, while in Atlanta, backed by musicians Glen Thrasher, Mark Moore, and others. She soon moved to New York City, United States in 1992, then later opening for Liz Phair in 1994, she met Steve Shelley of Sonic Youth and Tim Foljahn of Two Dollar Guitar, who encouraged her to record, and played on her first two albums, 1995's Dear Sir and 1996's Myra Lee.\nAudrey Faith Perry, later known as Faith Hill (born September 21, 1967 in Star, Mississippi), is a successful American country singer, known for her commercial success as well as her much-publicized marriage to country singer Tim McGraw. The tall blonde songstress's self-titled album, 'Faith, ' sold four million copies worldwide. The album featured her hit single 'This Kiss, ' which topped the charts for three straight weeks and became her first crossover success, hitting number five on the pop charts.\nMarta Marrero (born May 18, 1969 in Whittier, California, USA), better known as Martika, is a Cuban-American pop singer. As a child she dabbled in acting making her film debut as one of the dancing orphans in the film version of \"Annie\". As a teen she would star as 'Gloria' on the syndicated children's variety show 'Kids Incorporated'. After outgrowing her role, Martika would turn her focus towards her first love, music.", "label": "No"}
+{"text": "Across warehouses and businesses of various sizes, pallet racking offers fantastic storage solutions. Affordable pallet storage is not only easy to access and arrange, it also makes brilliant use of vertical space. In many warehouses and industrial work zones, it is easy to forget how much vertical space you have available. If you are struggling for floor space in your warehouse, it may be time to think about arranging low cost warehouse pallet racking.\nQA’s team of pallet racking experts have years of experience in helping to set up commercial and industrial storage solutions. We are mezzanine designers and office fit out specialists. However, we also specialise in the best industrial pallet racks money can buy. But why should you think about setting up commercial pallet racks for your operation?\nWHY CONTACT PALLET RACKING COMPANIES?\nPallet racking systems are often some of the most flexible and durable storage solutions for warehouses and industrial spaces. Double down pallet racking, for example, will help you to store more products with less space. You can also set up a low cost warehouse pallet racking system with wide aisles, or drive-in applications. These will allow you to easily manoeuvre forklift trucks and other powered access from rack to rack. This is an especially good idea, of course, if you find the items you store are often heavy and cumbersome.\n“Any Questions? Speak to one of our Representatives Now. Call us on 01179533232“\nNarrow aisle pallet racking, too, will be beneficial to those businesses which really want to make use of the space they have available. These systems will give you enough room to manage and move forklifts, while intelligently using the floor space you have available to your advantage.\nCrucially, pallet racking solutions are often great for smaller warehouses and operations. While they are great for larger operations, those spaces which are already struggling for room will surely benefit from options which maximise their storage potential.\nAt QA, we make sure to design and create modern industrial pallet racking systems which will stand up to your regular demands. When it comes to setting up a durable, reliable racking system, you are going to need a solution which stands the test of time.\nNo matter the size or weight of your products, be sure to set up pallet racking which can support your growth and changing demands.\nWHAT ARE PALLET RACKING PRICES?\nPallet racking prices near me will vary depending on what you need, and how much support you require. QA prices pallet racking systems based on material required, labour needed and more besides. Therefore, we always encourage you to call or contact us via email for a free quote. This means that you always benefit from a precise quotation for exactly what you need.\nRather than list flat pricing for pallet live storage online, we encourage our customers to approach us outright to build a custom package. This way, you will be able to see what you get for your money – we are transparent and upfront in everything we do. Therefore, you can easily plan your budgets ahead of time, as well as your space and physical demands. We want to support you with a storage system that is easy to manage long term, as well as which won’t eat away at your budget.\nPallet storage racks near me are some of the most affordable around. However, you must be careful if you are looking to but cheap commercial pallet racks elsewhere. There is a risk that you may receive a cheap service and product for a cheap price. However, with QA, you have our assurance that you receive the best quality service and care, as well as pallet racks, for the price you pay. We offer genuine value for money.\nCONTACT THE EXPERTS\nWhen it comes to setting up the best pallet racking system for your warehouse, make sure to contact a team with years of experience in the trade. QA’s expertise in the industry stretches over two decades and more. We have helped thousands of businesses and brands set up with fantastic pallet racking solutions and more besides. Crucially, we work tirelessly to ensure our customers receive the best racking and storage they can rely on for years to come.\nTherefore, even if you are unsure whether or not pallet racking is right for your business, make sure you get in touch with our team as soon as possible. We’ll take a look at your existing space, demands, budget and more. This way, we can tailor the perfect racking to your projected needs. You can either call our team via helpline or let us know details about your project through our online form.\nWhen you call to discuss low cost steel pallet racking or otherwise, there is never any obligation for you to continue. Get in touch and let’s start putting a plan into action.", "label": "No"}
+{"text": "The patience and pure willpower alone that it has taken me to grow these it kinda amazing. I'm terrible at growing things. I'm never home and I'm a terrible consistent plant water. Aka don't ask me to house sit.....ever. But with a little luck and a whole lot of impatient staring, I have successfully bloomed my pepper plants. They are tiny but they shall grow 💚💚💚 I feel like the next step in an hopeful Chef is really finding where your food comes from and how it comes to be. Peppers today, tomorrow a raised garden bed. Babysteps.\nMy husband just called to say 1. He will be home early and 2. What's for dinner? 3. He's hungry! A quick pick of the veggie garden = vegan Napoletana with 🍅basil, oregano, and parsley two ways. And I'm going to try dōTERRA oregano essential oil for the first time. Exciting! #organic#vegan#veggies#healthy#realfood#growyourdinner\nHappening in the Villano Homestead Kitchen. Aged Gouda and Chianti. Tony's awesome meatballs - a blend of spicy Italian sausage, pork and beef - baked in the oven and finished on the grill. Tanya's sauce made with everything from this year's garden - even the garlic! #growyourdinner#homesteadkitchen", "label": "No"}
+{"text": "He failed to area they\nNew push and you will radio and television channels had turned the case to the circus it had become- in hopes against guarantee was an expression Leland had heard. Leland constantly read 3 or 4 press a day regarding try to uncover what was happening, however, he had introduced them more for the Friday and you may last night. Leland pondered as to why. The fresh new push know possible almost and cops. Before the weekend break the father could well be escorted through the corridors of the cops headquarters basement to access the freshly decomposing system off their child. Leland got viewed sufficient doctored victims of criminal activities from violence-one would was basically enough. They were stripped and you may bathed down with alcohol, new wounds eliminated and you may tucked along with her on certified pictures. Immediately following death, earlier sank back again to the brand new skull, the human being vision had a mystical shine. The fresh eldest corpse Leland got seen in that cellar, men more than seventy, got appeared as if a kid shocked. Having been banged to help you death was just section of it. Passing by itself seemed to keeps put the expression to your their deal with. They all appeared younger and you can shocked, people who dying got overtaken easily. Mr. Shoftel create look for their own guy, and Leland, who had usually encountered the role he had been to experience so you’re able to hide about, couldn’t excitedly would you like to Mr. Shoftel a long life. All the guy had his nightmares, plus it was not tough to envision Mr. Shoftel’s. Setting his jacket to the their arms before the echo. Leland couldn’t consider any sense for Mr. Shoftel who never be clouded by memories out-of an excellent lifeless daughter. Mr. Shoftel might have something to remember shortly after the guy noticed this lady human body, and in case the guy investigate press, he was getting put up for it as well. Leland come to complete his purse.\nTowards Saturday night, instead of an image to operate, among Port Smith documentation had gone with a side-web page editorial outline of your own weeping mothers, captioned Why?\nLeland are 30-half a dozen, four ft 10, and you can considered a hundred and you may 40 lbs. Their tresses is actually darkish, dense and you will reduce brief. Their facial skin are fair and had a weak transparent high quality, to ensure he previously to get results tough to search closely hairless. Their lips have been black, the type you to checked wet after they were not. His brown attention were his extremely glamorous ability-and most expressive, also, getting he had was required to routine drawing anyone else towards talking, and that required getting hushed and you may promoting thoughts, real or purposely misleading, for the eyes. There can be a mark, the consequence of a car accident, inside the leftover eyebrow, so there is another, out-of another type of style of collision, over the side of their chin. One another scars had been small, slim, and you can light; many people don’t grab far see of those. It absolutely was simply in recent times you to definitely Leland got started initially to pay attention to his looks-up until couple of years ago he previously parted their locks on the top and you can allowed it to grow as long as the latest hairdresser will allow-additionally the effect that he generated now was just like the clean and you will traditional but at the same time since effective as the regarding an early congressman nevertheless discovering his occupations. Although not somewhat: there have been brand new marks and this, if they combined inside the, nevertheless got their effect; additionally the eyes, and therefore perhaps had had to misguide a lot of and you can seemed sick. The young-congressman presentation was created actually from the models you to Leland thought about since bad: his serves went in order to sober browns and you can grays-them two-buttoned, medium lapeled-the present try a brown worsted-and he used bow links. He had more than thirty ones. The installment loans Alaska guy enjoyed him or her; these were more relaxing for your so you can tie and more comfortable so you’re able to accept than just five-in-hands. The present tie was darkish having mark-sized light doodads like blighted cloves. It absolutely was something special in the occasion regarding absolutely nothing, and then he preferred it.", "label": "No"}
+{"text": "Accepted Payment Methods\nMedMattress.com accepts payments by Visa or Mastercard online. Click Here to apply for purchase order payment options.\nPayments must be made in U.S. currency.\nPrices and Price Changes\nSome prices listed do not include freight or handling fees and are subject to correction or change without notice. In the case of substantial increases, customers will be notified on an as needed basis. Orders will be not be processed unless approval is given by the customer. Every customer is given 24 hours to respond to a price increase, if no response is received, MedMattress.com will process the order with the corrected pricing. However, we always try to keep our prices as low as possible.\nMedMattress.com does not collect sales tax on any of its products. The purchaser is responsible for remitting any sales tax owed.\nLow Price Policy\nIt is always our policy to provide the lowest possible price to our customers. Additional savings may apply for bulk purchases.\nMedMattress.com can ship internationally. Canadian orders will be shipped UPS Standard unless otherwise specified with additional freight charges added. All other international orders will be shipped by DHL or USPS unless otherwise specified. Please note that orders shipping through the USPS are only traceable through the United States. All international orders will include increased freight charges.\nUse of Products\nPurchaser further agrees that all products will be used for their intended purposes only in a safe and legal manner consistent with all applicable state and federal laws and Purchaser’s own internal health and safety policies.\nLimitation of Liability\nMedMattress.com and DiaMedical USA shall not be liable for any special or consequential damages that result from the use of, or the inability to use, the materials on this site or the performance of the products, even if MedMattress.com and DiaMedical USA has been advised of the possibility of such damages. Applicable law may not allow the limitation of exclusion of liability or incidental or consequential damages, so the above limitation or exclusion may not apply to you.\nYou agree to indemnify, defend, and hold harmless MedMattress.com and DiaMedical USA, its officers, directors, employees, agents, licensors and suppliers (collectively the “Service Providers”) from and against all losses, expenses, damages and costs, including reasonable attorneys’ fees, resulting from any violation of these terms and conditions or any activity related to your account (including negligent or wrongful conduct) by you or any other person accessing the site using your Internet account.\nMedMattress.com reserves the right to change product specifications on all items without notice. All efforts are made to display accurate product information, however, due to uncontrollable manufacturing conditions, product specifications and colors are subject to change without notice. Actual product color may differ from online product color.\nFree Shipping Promo Exclusions\nOrder total must be over $100 prior to tax. Offer only valid Online and in the Contiguous US. Offer does not apply to expedited shipping methods.", "label": "No"}
+{"text": "Applying the Interpersonal Circumplex Model to Children's Social Goals: Connections With Peer Reported Behavior and Sociometric Status\nsocial goals, social adjustment, interpersonal circumplex, agency, communality, peer reported social behavior, sociometric status\nDigital Object Identifier (DOI)\nThe objective of the present research was to develop an assessment model for children's social goals. The aims were (a) to fit children's social goals to a circumplex model and to examine links between goals and peer-reported social behaviors (aggression, withdrawal, and prosocial behavior) in a sample of 276 participants (134 girls, 11- to 12-year-olds) and (b) to replicate these findings and examine whether social behavior mediates the relationship between goals and sociometric status in an independent cross-validation sample of 310 participants (143 girls, 11- to 13-year-olds). Results showed a satisfactory fit to the circumplex model and adequate psychometric properties of the goal scales of the new measure, the Interpersonal Goals Inventory for Children. Other findings included significant and meaningful relations between goals and peer-reported behavior. Social behavior mediated the relations between goals and sociometric status.\nWas this content written or created while at USF?\nCitation / Publisher Attribution\nDevelopmental Psychology, v. 41, issue 5, 699-710.\nScholar Commons Citation\nOjanen, Tiina; Grönroos, M.; and Salmovalli, C., \"Applying the Interpersonal Circumplex Model to Children's Social Goals: Connections With Peer Reported Behavior and Sociometric Status\" (2005). Psychology Faculty Publications. 926.", "label": "No"}
+{"text": "Customize your own box of 64 Count Crayola Crayons, 8 Count Crayola Crayons or Crayola Art Case in just a few quick steps. It's easy and fun!\nLooking for a pizzazzy book report format? Try bas-relief sculpture to add a new dimension to your next presentation!\nThis is a fun, easy, and meaningful way to display your patriotism all year ‘round. Create eye-catching patriotic coaste\nKeep track of the season, month, day, and date with this colorful, changeable calendar.\nCreate a house for the lovable character Corduroy after experiencing Don Freeman’s book, Corduroy.\nCapture animals in abstract drawings, finding the geometric shapes that make up animal faces and bodies.\nExplore proportion and geometry! Create a vibrant watercolor of your bedroom.\nWhat a charming way to write a book report! Each illustrated bracelet charm captures a character, an event in the plot,\nGrab your gills and fluff your fins to make art based on science! Research a fish, gather photos, and model a fun, reali\nLilies symbolize hope and the miracle of new life. Celebrate the arrival of spring, or learn about Easter traditions, wi\nStudents report on their favorite animals then create eye-catching zoo programs with hand-made stencils and paint roller\nCreate a colorful Model Magic hanging sculpture based on Alexander Calder’s distinctive geometric style. Students will d\nThe colors and textures in nature inspire artists in so many ways. Explore the artwork of Alma Thomas, and use the eleme\nHave fun with concentric circles and mixed media! Create an abstract piece of art.\nStudents use their knowledge of place value and economics to open a flower shop specializing in handmade bouquets.\nLook deep into an Ancient culture, and decode a visual language of simple dots and lines! Use these symbols to create a\nLooking for a memorable, handmade gift? The sculpting technique of building with coils may be ancient, but this vase cra\nCreate a dreamtime symbol in the style of modern Aboriginal culture.\nCreate realistic flowers from construction paper and recycled items to show what you know about the parts of a flower.\nWhat are asteroids? Learn more about these remnants from our solar system’s formation.\nFace painting is an ancient tradition! Explore the creative designs used by Australia's native peoples, who have painted\nWhat happens when you combine an art technique called sgraffito with the beauty of spiral designs in nature? You get a c\nPrepare to walk in space! Create an astronaut as you learn about space exploration.\nConnect with an ancient culture with Model Magic masks! Discover what role masks played in Aboriginal life, and apply th\nDraw a bird’s-eye view of neighborhood streets! Map the way from home to school.", "label": "No"}
+{"text": "You may have already heard of Dude Perfect, a group of otherwise perfectly normal dudes who like to mess around with basketballs. More specifically, mess around with impossible-to-believe trick shots they practice, execute and video tape to share on YouTube.\nOver two years, Dude Perfect has pulled off 99 oddball shots, from trampolines, off scoreboards, from long distances. And for their 100th, they enlisted the Goodyear blimp.\nSee the video by clicking here\nNow, before you brush this all off as great video editing, there was no editing. Everyone involved swears. It’s a clean, clear shot actually shots from multiple angles of a Dude Perfect member successfully sinking a shot from a moving blimp. Sweet!\nThe stunt was filmed at Goodyear’s main blimp hangar south of Akron on March 24, and, yes, it took a few passes. To eliminate landing and relaunching the blimp for each attempt, Dude Perfect brought along a bunch of basketballs; some 40 were loaded into the gondola to execute the shot.\nThey came at the basket from many angles, and while they don’t know how many attempts it took, the pure swish seen on the video was no trick. It was nuthin’ but net. And a pretty cool way to use a blimp.\n* * * * * * *\nAs you can see from this photo, Cincinnati-area dealer Tire Discounters really is a family-owned business. And you apparently don’t want to be invited to that Thanksgiving dinner!\nThe photo, by the way, was courtesy of safebraking.com, a cool new website that mixes important brake service tips and info with some off-kilter brake humor. Give it a look-see.\n* * * * * * *\nBeen on the road quite a bit lately, which is why this blog has been unkempt. Man, the weather turns and the weeds just pop up! Oh, that’s my lawn. Sorry.\nAnyway, my last entry continued the saga of Colorado Tire Corp. (aka Washington Tire Corp. and American Tire Corp.), and how its listing of purported OE customers appears to be, shall we say, a wee bit short on reality.\nIt was suggested, though, by one blog reader that I lay off CTC/WTC/ATC and its leader Abraham Hengyucius (aka Hengyu Zhang, aka Abe Hengyucius, aka Abraham Zhang), because “everybody has right to exist in this world.”\nThe online comment accused me of running some kind of “cartel of some big players of tire industry who are trying to malign the image of some emerging OTR tire companies.”\nFirst of all, nothing could be further from the truth. If I were involved in some cartel, I would not be tooling around in a second-hand 2004 Lancer. Cartel members get to drive far, far better vehicles.\nAnd at this blog, we treat everyone and every company the same. We only single out those companies that single themselves out good or bad.\nSecondly, we totally, 100% agree with you. We should live and let live. Absolutely. CTC/WTC/ATC should be allowed to exist and complete in the North American tire industry, same as any other real company. And we invite them to do just that, and put their products lug-to-lug against any other sold in the U.S. or Canada. I’ll even attend the tests and write a story!\nAnd we vow right here and now that we will aggressively go after Goodyear or Michelin or Bridgestone or any of the other “big players” or any company doing business in the North American tire industry whenever, among many other things, they misrepresent themselves to customers, refuse to admit what company(ies) produce(s) their products, lie to entire communities and local government bodies, play shadow games with their own corporate identities and/or those of their employees and management, make unsupported product performance claims, make wild claims of government support, make even wilder statements about competition, or use their efforts to “build” a billion-dollar tire plant as a means to gain EB-5 visas for purported investors or workers.\nWhen any “tire company” does things like that, we will be on the case!", "label": "No"}
+{"text": "pleated top – H&M (gifted)\nlovestory jeans – J Brand\nboots – vintage Mango\nturquoise double necklace – Accessorize (gifted)\nbrown leather skinny belt – Next (gifted)\nwooden bangle – Wallis\ngold dress watch – Calvin Klein (gifted)\nleather lead – vintage Oakberry\ncoat – model’s own\nThese jeans – what is it about them? I am so happy I can’t tell ya to have big flares back in my wardrobe, standing out in a sea of skinnies. I mean we all know that a flare is a more flattering cut on 95% of women and yet… here we all are donning skinnies on a day to day basis, hmm.\nAnyway, this little love affair (read obsession) began when I saw Maegan wearing these jeans more than a couple of times and I mean, this girl doesn’t really do repeats so I figure she must be onto something. Check her rocking her Lovestory jeans at www.lovemaegan.com. And now I have my own pair and I really do love them. They’re ridiculously long – friend of mine says, ‘Why don’t you have them shortened?’ – well then I won’t be able to hide huge heels under them and fool people with my gazelle/Giselle like limbs, duh.\nExpect to see a lot more of them.\nTotal agreement with the flares!! They look so good! Love the walking shots….and Mr K has a mighty stylish coat on\ni love so much how you look. please check out my blog.\nGorgeous! I also love those flares. And I should also point out that not quite *all* of us are wearing those skinnies… (alas!)\nGreat pictures…very nice… check me out\nLove your fashion blog and would like to see more of your growler. Kepp up the good work", "label": "No"}
+{"text": "Grieving dad attacks heroin by arming families with ways to get help\nWhen Sam McNeil lost his battle with heroin addiction in October, his grieving family declared war on the epidemic. They would wage their assault from the Internet.\nIt started with an online obituary that explained how Sam, 28, died at home west of Boca Raton “from a drug overdose after losing an eight-year battle with addiction. If one person reads this and it stops them from going down the path of addiction, then his death was not in vain.’’\nIt quickly blossomed into a national podcast aimed at arming addicts and families with resources and information to help people struggling with opioid addiction — resources that the McNeils knew little about during Sam’s battle.\nLaunched in May, the podcast is called “Cover2 Resources,” a phrase borrowed from a popular football defense — and not just because Sam was a huge Cleveland Browns and Ohio State Buckeyes fan.\nThe name also fits the struggle waged by Sam’s family as he fought addiction, which started during his recovery from a beating he received when he was trying to defend a woman at a party in 2007.\n“We felt like we really had it covered. In retrospect we didn’t,’’ said Greg McNeil, Sam’s father, of Hudson, Ohio.\n“There’s so much more that, had we known, may have improved Sam’s odds of survival. Would it have changed the outcome? I don’t know. But the more information we can share with other families, the more they can increase the odds of survival for their loved ones.’’\nNarrated by Greg, the series includes nearly 40 podcasts featuring people on the front lines of the drug epidemic — from the medical examiner in Cuyahoga County, Ohio, to an executive with a treatment center in Boca Raton to a former Palm Beach County sheriff’s detective, Gary Martin, who started the Narcotics Overdose Prevention and Education (NOPE) task force in Palm Beach County in 2004.\nGreg recorded two episodes aboard a needle exchange truck in downtown Cleveland. In another, he interviewed the PBSO detective who investigated Sam’s death, Joseph Piatchek, whom Greg praised for showing “extraordinary compassion” to his family.\n“We wanted to shine a spotlight on the people who are really making a difference in the opioid epidemic and highlight things we didn’t know for families in the future,’’ said Greg, 58, who runs a web design company called 216digital.\n“The more I learned, the more I realized we didn’t have it covered.’’\nGirlfriend carrying Sam’s child\nSam McNeil, the youngest of Greg’s three children, developed his addiction after he was hospitalized for injuries he suffered when he was beaten up at a New Year’s Eve party in 2007.\nWhen his prescription for pain pills ran out, he started buying them on the street. When that got too expensive, he turned to a cheaper option — heroin, a common path for many addicts.\nSam sought treatment in Ohio, did well for a few months but relapsed. Thinking they had failed, his parents sent Sam to Florida where he enrolled at The Boca House.\nSam seemed to be doing well. He attended his brother Mathew’s wedding in Ohio last summer and then came back to Florida where he had a great job and a girlfriend who was pregnant with their child.\n“Sam had a lot to live for and everything was going great for him,’’ Greg recalled.\nOn the morning of Oct. 23, he kissed his girlfriend goodbye. She went off to a church retreat in Fort Pierce and Sam went to work as an airplane parts salesman. Around noon he told his boss he wasn’t feeling well and went home.\nHis girlfriend, Donasha O’Connor, a nurse, called Sam that afternoon, but got no answer. The next day, after Sam failed to answer her calls and texts, she asked a neighbor to check on him.\nThrough the glass door, the neighbor saw Sam sitting in his chair. He appeared to be asleep in front of a TV displaying a basketball video game. But he wouldn’t respond to loud knocks on the door, so the neighbor called 911.\nDonasha, five months pregnant, arrived home just as Sam’s body was being wheeled out of the house on a stretcher. An autopsy found fentanyl and heroin in his system, his father said.\n‘We are going to make a difference’\nTwo days later, at a memorial service at First Baptist Church of Lantana, Sam’s father talked about his son’s addiction and pledged to help spread awareness so that his death might help save lives. Before his death, Sam had talked about starting a program to help other addicts.\n“He has a profound passion for helping people who have gone through what he has gone through and we are going to carry that forward,” Greg said at the service. “We are going to make a difference and it’s all going to be about him, what he has done in his lifetime and what he will do in the future.”\nAt the time, Greg wasn’t exactly sure what the family would do. But a few months later, he launched a nonprofit foundation called Cover2 Resources.\n“For whatever reason the concept of doing a podcast just came to me, and I think that was a little bit of Sam at work,’’ said Greg, whose digital design company produces the podcasts.\nGreg narrated the introductions to the first seven episodes, each starting with the same somber introduction: “My name is Greg McNeil. Last October my son, Sam, died of a heroin overdose.’’\nAmy McNeil, Sam’s sister, has narrated the other introductions. Her father has conducted all the interviews, which include an Ohio judge talking about drug court, a recovered addict talking about his struggles to stay clean and a “certified coach” for parents of opioid-addicted children.\n“There’s so much more that we know now that we didn’t know when Sam was with us about this disease,’’ said McNeil, who estimates he has 900 listeners.\n“While nothing can bring our son back, we hope that sharing our experience will help prevent others from going down that road.’’\nOne of the most emotional interviews features Dr. Thomas Gilson, the medical examiner of Cuyahoga County, where accidental heroin overdose fatalities went from 37 in 2014 to 91 in 2015.\n“I really think this will kind of be the public health crisis of my whole career. It’s hard to watch people just vanish in such big numbers,’’ Gilson says.\nTo drive the point home, he added: “What we do essentially in Cuyahoga County every year … is basically load up a couple of plane loads of people and just crash them into Lake Erie. And this year will be worse.\n“Are we doing enough, is my question. I don’t know that I would say ‘yes’ to that because we are not turning the tide on this. If we lost so many people from, say, the Zika virus as we lost in one month in Cuyahoga County, what would our reaction be? Do we have to keep waiting for the Philip Seymour Hoffmans or the Princes to get our attention on this? Our neighbors are dying with such frequency. We need to do a better job with this.”", "label": "No"}
+{"text": "|12 Point Design/design\nWeb Design Services\nThe web development team at 12 Point Design has worked on a variety of web projects and assisted other developers in even more. We've also designed specific aspects of pages and sites for people that needed assistance, such as 'back end' processing systems and database tools. Lastly, our designs use a very simple and consistent file structure (not layout) which enables our clients to update the content with little or no web design experience.\nOur design team is skilled in creating sharp, professional designs, which are search engine optimized (SEO), to help you reach your target audience as quickly as possible.\nOur Newest Example Sites\nHere are a few example sites using the Templating Engine:\nHere are a few example sites using WordPress:\nThe Sierra Mountain Times was an attempt at creating a broad 'local' newspaper for the motherlode and surrounding areas.\nThe Sierra Mountain Times website provided the opportunity to use the 12 Point Design Templating Engine's exposed \"automagically created relative linking system\" to create links to relative articles for the same volume and issue, and it provided very intuitive archival and search tools. Can generating a linking system ever be easier than visiting the pages you want linked?\nSierra Mountain Times\nPO Box 1306\nTwain Harte, CA\n|12 Point Design © 2024 Last Updated: 4/24/2019 Contact Webmaster", "label": "No"}
+{"text": "Beautiful 2 storey character home in lovely neighborhood only minutes to the harbour and downtown Oakville. Situated on a beautiful tree lined street this home has a private backyard with garden shed. Main floor layout is warm and open, features hardwood floors, gorgeous stone wood burning fireplace, spacious living & dining room, and sun-room over looking deck and gardens. Presently contains an upstairs suite with kitchen, living room, bedroom and bathroom. This 3 bedroom home has hardwood floors, and the second floor, California shutters, and a luxurious 5 pc bathroom. Outstanding opportunity to live in a charming neighborhood close to all amenities . 48 hours irrevocable offer.", "label": "No"}
+{"text": "There's so much more to the UK than London. Yes, London is an amazing city and all that but the UK has so many different beautiful and.\nCities of London and Westminster is a constituency returning a single Member of Parliament (MP) to the House of Commons in the United Kingdom Parliament. Member of parliament : Mark Field ( Conservative )...\nCities london - - journey fastBrighton is known for being a fun place to visit and a quick respite from crazy city life in London. The seat covers the entire City of London and most of the City of Westminster lying South of the Marylebone Road and the Westway. The Cass is amidst a golden opportunity.\nIncludes everything in All Access, plus:. Spatial Planning and Urban Design MA. Find out more about our lecturer in Urban Design. Stoke Newington and Hackney North. It will take time, but eventually one big hub will develop. And that, cities london, bankers told me, is part of the problem: Vienna feels like it has been asleep for much of the last century. The force has unique red and white chequered cap bands and red and white striped duty arm bands on the sleeve of the tunics of constables and sergeants red and white being the colours of the Citywhich in most other British police forces are black and white. Course led by Lara Kinneir. Local Government Commission for England. Bethnal Green and Stepney. Has taught as a Diploma Tutor at Cambridge University School of Architecture, and is currently a Senior Lecturer in Theory and Design at The Cass School of Art and Architecture. Cities london Encinas studied Architectural Technology at Polytechnic University of Catalonia in Spain and completed \"cities london\" degree at Vitus Bering University in Denmark. Historia BrittonumVI. Gardens of the City of London.\nCities london - - travel cheap\nMakers of Playing Cards. Theatre and Performance Practice BA students collaborate on project exploring the science and art of responsive swarming. Teaches on BA Hons Architecture, First Year Tutor. The city has beautiful architecture and housing options, picturesque canals, excellent restaurants, music and theater, lively night life, and a cosmopolitan and tolerant attitude cultivated over centuries as a major global trading center. Multidisciplinary artist whose work has been shown widely in the UK as well as in exhibitions in the Netherlands, Belgium, Norway, Germany and China.\nExpedition: Cities london\n|Study postgraduate research programmes list dedchpsy educational child psychology||Image of large white house. Brazil Study Programme Living in the City. What links here Related changes Upload file Special pages Permanent link Page information Wikidata hospital jobs queensland Cite this page. Looking forward to your reply Thanks so much providing such useful information and putting these cities and points of interest into some context! From Wikipedia, the free encyclopedia, cities london.|\n|Purchasing files diem foreign||569|\n|NATIONAL PARKS EAST THAILAND||Teaches on BA Hons Interior Design. What links here Related changes Upload file Special pages Permanent link Page information Wikidata item Cite this page. The City is a major business and financial centre. International Schools News Research Alumni Businesses and employers About Contact us. Completed a MA in Fine Art at London Metropolitan University.|", "label": "No"}
+{"text": "James W. Kay, 67, of Durham Township, died Saturday in Quakertown Hospital. He was the husband of Nancy (Bumpuss) Palmer Kay.\nA graduate of the University of Southern California, Los Angeles, he operated his own consulting firm, James W. Kay Inc., since 1975. Before that, he was a chemical engineer at Charles Pfizer Company. He helped develop and patent a sunscreen.\nBorn in Pasadena, Calif., he was a son of the late Jess and Florence (Pearson) Kay.\nHe was a member of Trinity Episcopal Church, Easton, where he was a chalice server and helped in the Meals on Wheels program.\nHe served on the Durham Township Planning Board.\nSurvivors: Wife; sons, John R. of San Diego, Calif., and Jeffrey W. of Wolf Point, Mont.; stepdaughter, Deborah Palmer of Honolulu, Hawaii, and five grandchildren.\nMemorial services: 2 p.m. Wednesday in the church. No calling hours. Arrangements, Robert W. Snyder Funeral Home, Riegelsville.", "label": "No"}
+{"text": "While I knew about the whole-tone and octatonic scales prior to the course, I never heard about nonatonic or nine-step scale. None of my teachers mentioned it to me, nor did I find it among any of my earlier study material. Even online, there was very little information about this scale. As it seems, it has been rather neglected by musicians.\nSimilar to the whole-tone scale, but especially the octatonic scale with whom it shows a strong link, nonatonic scale also occurs from the symmetrical division of the octave. While this is done using the whole/semitone alteration within four minor third sections, which equally divide the octave in the octatonic scale, the nonatonic scale is formed by the alternation of whole/semitones in the octave divided into three equal major third sections. In the major-third tetrachord, the tones may be arranged in following ways: semitone/whole tone/semitone, whole/semitone/semitone, and semitone/semitone/whole tone. (Fig. 1) Depending on this arrangement, there are three versions of the nonatonic scale. (Fig. 2)\nFig. 1. Three versions of the major-third tetrachord\nFig. 2. Three versions of the nonatonic scale Continue reading “Example 4 Research, Part 1: Nonatonic Scale and its Coincidental Use until Tcherepnin”", "label": "No"}
+{"text": "Burma Times Correspondent: April 01, 2015\nThe humanitarian situation in the Leda unregistered refugee camp of Bangladesh continues to worsen in the absence of humanitarian aid.\nIn some of the worst cases in recent times, many children are showing signs of malnutrition.\nThe above picture shows one of the victim, a 3 year girl Aziza Khatun, daughter of Ali Ahmed.\nMany children have also died due to water borne diseases and the complete absence of healthcare in the refugee camp. Many women and girls have been sexually abused by miscreants as they search for water in nearby villages.", "label": "No"}
+{"text": "Over 60 airlines have partnered with us to bring the world to Oman. These airlines connect travellers from around the globe to the Sultanate, welcoming millions of visitors each year to experience the Sultanate’s unique beauty. With such a wide range of flights to choose from, finding the best option is important when planning a trip to Oman.\nWe are proud to count Oman Air and Salam Air among our local partners, ready to take you on your Omani adventure.\nOman Air, the flagship carrier of Oman since 1993, has transformed Muscat into a vibrant gateway to the world. Today, it flies passengers directly to various destinations worldwide, connecting them to even more through code-share partnerships with over 15 airlines.\nRecently, its dedication to excellence was recognised with a triple win at the World Travel Awards 2022, including the coveted title of World’s Leading Airline for Business Class.\nSalamAir, inspired by the soul of Oman and its people, is the first low-cost airline in Oman, offering a range of domestic flights within the country, while connecting major cities to Oman’s vibrant tourist hubs like Muscat, Sohar, and Salalah. The airline provides a convenient and affordable option for exploring Oman’s diverse regions.", "label": "No"}
+{"text": "The experience of authentic beauty, I believe, gives us a glimpse into Ananda- the divine bliss state. To know true beauty, our inner state must be in harmony with nature; we experience a moment of union and connection as we exclaim 'oh that's beautiful!'.\nBeing a creative woman, I'm drawn to aesthetics and I'm sure you are too. Colour, shape and texture speak to my soul! I love harmonious arrangements; the patterns of nature; a mindfully crafted table setting; exquisite handwriting; striking architecture. It all hits me in a place that feels like life is shimmering through me.\nWe are by nature, sensory beings, and the practice of yoga teaches us not to be ruled by the senses so we can get closer to our true nature. This led me to question whether it would be superficial to seek beauty as a spiritual practice.\nHowever, given recent reflections, I am feeling energised by the notion that cultivating beauty can indeed be a spiritual practice. Note that I use Beauty as a broad term, which may be interchangeable with terms such as bliss, exquisiteness, deliciousness, connection and divine self-love.\nHere are 5 ways you could begin to explore beauty as a spiritual practice to uplift yourself and others:\n1. Create a Beauty Alter: Choose your space, a table top or a window sill can work well. Put on some music that uplifts your spirit while you collect objects that inspire beauty and go about assembling your beauty alter. Consider what colours, shapes and textures look good alongside one another. You might like to add pictures of people and places you love, art objects, sacred objects that remind you of loved ones or life changing experiences, elements of nature (for example I have a shell for ocean, a feather for air, a candle for fire, and a chunk of wood and some special rocks and stones to represent earth).\n2. Gratitude. Quite simply this practice take us straight to our heart. When we are being grateful, we connect in with the impact of our greatest joys and blessings in this life. By nourishing our attention on what we are grateful for we drown out the darkness and any sense of smallness or contracted-ness we've been feeling. We become available to the beauty and natural abundance of our aliveness.\n3. Self Massage with Oil: This is a wonderful practice to honour your body temple. At a glance it may seem superficial, but it's more than skin deep; nourishing yourself with massage sparks an attitude of self-love - the wellspring of inner beauty.\nLay a towel down on the ground and sit in a way you are most comfortable. Apply organic black sesame oil (if you are in a cool climate) or organic coconut oil (if you are in a warm climate) or any other nourishing pure body oil such as argan oil or jojoba and massage it in to your whole body. Take long smooth strokes to rub the oil in to your skin using as much oil as your skin can absorb. As you stroke your skin give thanks for your body and nourish yourself with loving touch. Then hop into a warm shower (or bath) and just allow the water to wash any surface oils off. Your skin will feel soft and smooth.\n4. Smile at Strangers: Spread the Beauty! Smiling at a stranger on the street will often inspire a smile in return. Be the one who gives people eye contact and a smile, whether it's in the supermarket or on the train- you might just make someones day!\n5. Random Acts of Beauty: Something I've started doing randomly is making flower mandalas in public places, usually after I teach yoga. I'll go and arrange some flowers in a pattern. I know of someone else who makes art and leaves it on trains. And there's a local yarn bomber in my community who crochets around trees and street poles- it's so unexpected and... beautiful! Your creativity is embedded in your connection with the divine, experiment, play and create something beautiful for someone to stumble upon.\nGot other ideas for cultivating beauty as a spiritual practice?\nI'd love to hear them!", "label": "No"}
+{"text": "- full of flies' eggs or larvae; maggoty\n- contaminated; spoiled; tainted\n- Informal shabby, dingy, disreputable, etc.\nSee flyblown in American Heritage Dictionary 4\n- Contaminated with flyblows.\na. Tainted; corrupt: a flyblown reputation.\nb. Dirty or rundown; squalid: a flyblown bar on the edge of town.\nLearn more about flyblown", "label": "No"}
+{"text": "A captivating rural romance featuring an indomitable young woman determined to save her family farm, and the city-boy who is not all he seems...\nPaige Quinn will let nothing and no one distract her from caring for her crippled father, Connor, and fighting for her remote, drought-stricken property, Banora Downs. Least of all a surprise farm-stay guest named Tait Cavanaugh, whose smooth words are as lethal as his movie-star smile.\nExcept Paige can't help noticing that, for a city-boy, Tait seems unexpectedly at home on the land. And he does ask a lot of questions…\nIt doesn't matter how much he helps out or how much laughter he brings into her life, she soon suspects he is harbouring a big secret – the real reason he has come to Banora Downs…\nGenra - Australian Contemporary Romance\nBeneath Outback Skies is an Australian Contemporary Romance written by Alissa Callen. I received this ARC in exchange for an honest review by Random House Australia through NetGalley.\nI was pleasantly surprised by this little gem. Impressed with the simplistic writing style, interesting characters and the sweet romance, I was able to lose myself in the stark imagery and enjoy this fun read.\nStory, Characters and Plotting…\nTaking place in the dry and scenic outback’s of Australia, I could easily imagine and feel the struggle of the community, the people and specifically, Banora Downs, as it was left barren by drought and transformed from a thriving freehold to the desolate and parched dustbowl we now see. I empathized with the desperate farmers as they waited for a rain that seems to have abandoned them.\nPaige Quinn is determined to keep her homestead, Banora Downs, from the fate of surrounding farms where farmers are forced to sell or abandon their properties which have surrendered to drought. She’s also resolute in caring for her disabled father and keeping him from realizing just how severe the drought has affected their farm and declining livestock. Suffering the effects of a past relationship gone wrong, her trust is hard to earn and she’s built walls to keep her heart safe. Her struggle and determination can be easily misunderstood as detachment but in reality, she feels under pressure to pull them out of a never ending work load before they lose everything. I really liked her character. She feels Banora Downs and her father are her sole responsibility as she tries to keep the promise she made to her mother. Her strength and spirit was admirable.\nNot as oblivious as she think, her father, Conner, has other plans. Seeing the strain and all consuming life of the farm weighing his daughter down, he decides it’s time to step in and take action. Announcing he’s invited a paid guest to stay on their farm, he introduced her to Tait Cavanaugh.\nInstantly disliking the city-boy, Paige tries everything she can do dissuade Tait from staying. But little does she know, he’s part of her father’s plan and he’s not going anywhere.\nTait has personal business to attend while he’s at Banora Downs and getting close the Paige is just one of the benefits.\nI really enjoyed Tait. He was hard working, gentle and caring. Coming from the city, he saw firsthand the problems facing this community and he stepped in and tried to help in any way he could.\nPaige and Tait weren’t to terribly complicated and there was a bit of intrigue in the middle of the romance. I liked the fact there was an instant attraction but they didn’t immediately fall into bed with one another. There was a slow build with conflict and tension. But, though this was a sweet story, I would have liked a bit more of a push-pull to enrich the plot and more romance to ignite the spark and chemistry between the characters.\nThe Wrap Up:\nThe story was well told and I loved all the unfamiliar references to things specific to Australia. This was a sweet and enjoyable read and my first time reading this author. I will definitely keep an eye out for future works from Alissa Callen.", "label": "No"}
+{"text": "Lena Stormvinge, one of 15 certified KCS trainers in the world\nEffective knowledge management improves the service levels and the service desk work flow dramatically. The support organization will benefit from 60% shorter resolution time, 40% higher first-contact resolution rate, and 30% more satisfied employees.\nIn this webinar you will learn:\n- What the established knowledge management methodology KCS (Knowledge-Centered Service) is\n- How KCS can improve the results of self service\n- How modern technology empowers the support team to capture, structure, and share knowledge within the entire organization\n- How the whole organization will benefit, both in the short and the long term\nListen to Lena Stormvinge, one of 15 certified KCS Trainers in the world, go through the core principles of KCS and demonstrate why a KCS verified knowledge tool matters, and how it creates value to the whole organization.", "label": "No"}
+{"text": "You will find a lot of advices and tips about the best way to travel the planet. We’ve collected some good information for you personally below.\nNow it is your turn. Utilize this information and begin travel all over the world the very best you are able to and inspire others.\nClick below for more about gus petro\n- Check out more about gus petro\n- This Is What New York Would Look Like In The Grand Canyon – Co.Design\n- Images | New York City’s New Location…The Grand Canyon – stupidDOPE.com\n- Gus Petro Photos merge New York City and Grand Canyon – New York Daily News", "label": "No"}
+{"text": "A FLOOD WATCH GOEST INTO EFFECT SATURDAY MORNING AT 4AM AND WILL REMAIN IN EFFECT THROUGH SUNDAY AT 7AM. 2\"-4\" OF RAIN POSSIBLE FROM FRIDAY TO SUNDAY MORNING.\n\"ANCHORMAN 2\" - DAVID KOECHNER\nWASHINGTON (AP) -- In the \"Anchorman\" movies, Champ loves Ron Burgundy.\nSUPER BOWL 2014-SNOW PLANS\nEAST RUTHERFORD, N.J. (AP) -- It's been a rough start to winter in many parts of the country.\nWeekly US jobless claims hit 9-month high of 379K\nWASHINGTON (AP) -- The number of people seeking U.S. unemployment benefits rose 10,000 last week to a seasonally adjusted 379,000, the highest since March. The increase may reflect volatility around the Thanksgiving holidays.\nBC-US--Dow Record-Three Personal Stories, 1st Ld-Writethru,1173\nDow Record: Three tales of ups, downs and changes\nAP Photo FX102, FX103\nEds: With BC-US--Dow Record. Adds photos.\nBy SCOTT MAYEROWITZ\nAP Business Writer\nNEW YORK (AP) -- When the Dow first crossed 14,000, investors were overjoyed. ...\nIN THE NEWS: DATA THEFT AT TARGET STORES PROBED\nNEW YORK (AP) -- The Secret Service is looking into a credit- and debit-card data theft at Target stores.\n� 2013 Sinclair Broadcast Group. All Rights Reserved.\nLocal 12 WKRC-TV is the local station for breaking news, The Weather Authority forecast, traffic alerts, community news, Cincinnati Bengals and Reds sports updates, and CBS network news and entertainment programming for the Cincinnati and the Tri-State area of Southwest Ohio, Northern Kentucky and Southeast Indiana, including Anderson Township, Avondale, Blue Ash, Bond Hill, Camp Washington, Cheviot, Cleves, Colerain Township, Columbia-Tusculum, Corryville, Norwood, Delhi, East Price Hill, Golf Manor, Hyde Park, Lebanon, Loveland, Lower Price Hill, Madeira, Mariemont, Mount Adams, Mount Airy, Mount Healthy, Mount Lookout, Mount Washington, Oakley, Over-The-Rhine, Reading, Sedamsville, Sharonville, Springdale, St. Bernard, South Cumminsville, Symmes Township, Mason, Hamilton, Union Township, Walnut Hills, West Chester, Wyoming, West Price Hill, Westwood, Winton Hills, Alexandria, Bellevue, Covington, Crescent Springs, Erlanger, Fort Mitchell, Fort Thomas, Fort Wright, Florence, Hebron, Highland Heights, Newport, Southgate, Villa Hills, Walton, Aurora, Greendale, and Lawrenceburg.", "label": "No"}
+{"text": "Interest in managing broadleaf and mixedwood stands has grown. The alternative to mixedwood management, is the current practice of eliminating the broadleaf stand component. There is little information on how to manage these productive stands. The project will determine the relationship between stand density and i) wood quality, ii) white pine weevil and wood quality, and iii) growth and yield. Results will modify existing policy, provide cost-benefit information by treatment, foster better site utilization, and enhance structural and species diversity. Outcomes should facilitate forest certification. A strategic plan for SBS mixedwoods will be available by 31 March. Nicole Balliet, Tracy Murray, Ian Hartley.\nBalliet, Nicole, Murray, Tracy; Hartley, Ian; University of Northern British Columbia. 2003. Growth and yield and wood quality in a SBS mixedwood stand after stand density management: annual operational report (2002/2003). Forest Investment Account (FIA) - Forest Science Program. Forest Investment Account Report. FIA2003MR286", "label": "No"}
+{"text": "Kristin is a first-year member of the Swarm Performance Team. She graduated from the University of St. Thomas with degrees in financial management and marketing management.\nKristin began dancing in kindergarten, and performed on her high school dance team, as well as on the nationally ranked University of St. Thomas Dance Team.\nWhat was your first impression of the Swarm when you joined the SPT this season? Did you know very much about lacrosse?\nMy first impression was that the organization and the team had a fun and comfortable atmosphere and there was so much emphasis on the fans, which I thought was great. I had seen and played a little lacrosse, enough to know what it was all about, but I’m still learning some of the technical rules about the NLL and the game.\nWhat was it like to experience your first performance at Xcel Energy Center for the season opener?\nThe first performance, and the first run out of the tunnel, was awesome! I liked how the lights are dim, and the fans are SO loud! It makes it feel very intimate and like a Saturday night party! Performing is one of my favorite things to do, and it was really fun to have my other teammates out there to experience that with.\nDo you ladies get to watch most of the game or are you too busy moving all over the arena?\nWe are so busy moving throughout all levels of the arena, we have to try to peek to see what’s happening in the game. It is fun to listen when the Swarm scores, because it becomes so loud! My favorite part is when we are able to come down the stairs to cheer with the fans, because then we have a chance to watch some of the plays.\nWhat has been the most memorable part of being a member of the Swarm Performance Team thus far?\nThe most memorable parts have been some of the appearances that we do during the week. It’s a chance to let the public know what Swarm is about, and meet some of the fans. That is fun because I have recognized fans at the games from talking to them at an appearance. It is also great making memories with the ten SPT members, and becoming close friends.\nWhat kinds of preparations do the SPT members go through to get the dances ready in the week(s) before game day?\nSPT only practices on Mondays, so the Monday before the game everyone will talk through what went well and what we can improve on. We will drill the dances for that week until everyone feels comfortable to put in on the field. All the girls will make sure that they are game ready, in utilizing our sponsors CorePower, Expressions MD, Sanctuary Salon and Golden Tan, so that members look and feel their best for game day. I personally try to get a lot of sleep and drink a lot of water so I can stay active the entire game!\nWhat has been your favorite routine so far, or is there one coming up that you are really looking forward to?\nMy favorite routine is one that we did the last game in January and one that we are doing this coming game, called “Rockstar”. It’s very dynamic, and is high energy! There are some games that we are still learning choreography for so it’ll be exciting to learn new material!\nCongratulations on your engagement! How is the wedding planning going?\nWedding planning is going great! I like to get things done as soon as they come up, so we nailed down all the big ticket items right away, and now it’s coming down to those fun details. It’s fun because I can be creative and do things myself, let it be my artistic/craft hobby.\nValentine’s Day was this week…did your fiancé do anything special for you?\nOf course flowers, chocolate and a card! But we have made lasagna the last three years we have been together for Valentine’s Day, so we made lasagna, and it was very good! He’s a good cook… so he helped me a little bit! This year we actually had practice, so I also got to spend Valentine’s Day with my SPT girls!\nAre you excited to perform this Saturday during “Go Green at the Hive” night after a three week break?\nYes I’m very excited! It’s always a great way to spend the weekend. And after a long time on the road I hope the Swarm and the fans will also be happy they are at home!\nBe sure to vote for Kristin as this week's NLL Girl of the Week! You can vote on the bottom of NLL.com.", "label": "No"}
+{"text": "How To Find Your Ovulation Cycle->Xxx Power Male Pills -> Erectile dysfunction: -> Extenze And Marujuana ESSTI\nWhen I was a kid, I screamed and Extenze And Marujuana disappeared into the deep ditch.After a dozen times in a row, grandma can Vitality Ed Pills Dr Phil Extenze And Marujuana finally swim normally.Yes, the trestle has Extenze And Marujuana not changed, but it is relatively new now.Why Extenze Warning did you go there Who is How To Find Your Ovulation Cycle Extenze And Marujuana chasing them Go.We are not in the future Extenze Steroid peaceful years, we will Labido Booster For Woman not be able to bear any hardships in pursuit of any quality of life.I wanted to sneak away, but Linger took me and said, Go and say hello to others I had to walk to the door of Shiqing and Stinger Male Enhancement Pill knocked on the door.If you were still alive at that time, and I was alive, I would definitely come to Hormonal Imbalance Causing Low Libido see you.\nThe serpent was not polite, opened his big Que Es El Sildenafil mouth, pushed away the slate, Red Rhino 5 3000 Male Enhancement held my body in his mouth, flicked it sharply, put it in his mouth Extenze And Marujuana and bit.Fortunately, Sexual Health Bills 2016 Increase Girth Exercises my fire bell and Hongluan s two pieces of fire Natural Female Libido Enhancers armor have a Male Penis Enlargement clear heart with me.If you believe it or not, you have nothing.Where are Extenze And Marujuana you Go out, turn left on the Erectile Dysfunction Mdma Viagra And Alcohol Effects third stone pile, turn right, then turn left on the tenth stone pile, step back two Ed Generic Pills Buy Online stone piles, and walk into the aisle on the left This idiot jijiwaiyiyi Dui, how can I remember, I can only follow his guidance, out of the Wencheng Princess Temple, and Extenze And Marujuana walk into the stone pile.The last time he came, he brought a crossbow arrow and shot me apart, Male Enhancement Vs Transgender saying that he now inherited the swordman.How can people come back from death On Sale Monsters are not possible.\nOriginally, they just Extenze And Marujuana circled the chimney mouth.The question is, if we go to Mermaid Island, what should Shi Qing do if we want to Mens Sex Supplements be nice to me I asked with a smile.Maybe you know how to play with Extenze And Marujuana this thing.I kept catching the iron rod with my hands and threw it towards Fumio Shimada and the others.Some people live in high rise buildings, some are in deep ditch, and they will be successful.Eventually, Getting Wet Drugs there Extenze And Marujuana will be problems with the body system, which may make it impossible to live long, or even lose her life.\nHong Extenze And Marujuana Luan flew over and prepared to breathe fire.After Geoduck X5 Male Enhancement a while, the Sun Temple disappeared, as if it was hiding, only shaking.When I opened the mask, the tongue in Extenze Kaufen my Extenze And Marujuana mouth fell out.Unexpectedly, a ghost would miss his hometown.I thought for a Extenze And Marujuana Taking a Male Enhancement while, and said to How To Find Your Ovulation Cycle Ling er Go down and wait for me.Don t worry, listen to what the mermaid grandma said, Extenze And Marujuana The Best Viagra Pills they haven t approached Mermaid Island yet.\nThe two of us have been talking for Jiang Zhonghe.This means that Propanal Erectile Dysfunction Monkey King will never escape the palm of the On Sale Buddha.I just Office For Sexual Health Promotion Iub cut off the hose, but they all had bows and crossbows in their hands.I nodded, this is also true, it s all dead, can you control it Who loves to marry.Wei Zhen It must be How To Find Your Ovulation Cycle Extenze And Marujuana Erector Male Enhancement Pill said that the tiger face becomes a tiger demon only after it has died once.They seemed to have not eaten for a long time.\nHe looked back at me and was not surprised, I knew you were here.I m afraid these guys have to fight, after all, there is only one.Be careful, there are many green snakes hidden in the trees, I said.What s the use Is your three eight cover or Japanese Penis Pump Club style equipment No guns, no cannons, the enemy builds VigRX Plus it for us, this is a good thing.Waiting for them to fall asleep at On Sale night, I went to the balcony to smoke, thinking that if we escape, the Daoist Leave Husband Over Low Libido Alliance guys should not be able to track us.There is no one outside, I take back the office The patrolling face Lin Jia directly Ed Doctors flees to Tang Ancient Town.\nIf the opponent attacks from a distance, I guess it will be fine.He hurriedly asked people to inform, ten minutes passed Side Effects Of Extenze Mood quickly, but no one wanted to come out.If you can do it, I can listen to your arrangements.Now swimming alone, it seems that the sea can indeed heal them.Three Extenze And Marujuana I won t wait for you Extenze And Marujuana if you don t come Echinacea For Sexual Health Extenze And Marujuana back in 2016, Qingqing said with Extenze And Marujuana The Best Viagra Pills anger.I was a little worried about Ling er and Zhang Peng.\nThe old Zhang Extenze And Marujuana Xiaoquan was hiding in the innermost stone chamber.The question is, why doesn t the river flow What s the situation How big is the average penis? Extenze And Marujuana with this waterfall How come there is a trace of the sky hidden.If the whole package is five hours, at least one hundred and fifty gold bars are required.Although she sounds much younger, she Deliberately pretending to be the voice of an old man, so I can hear it.The body of On Sale the ringed sea snakes was black and white.This girl has a good VigRX Plus figure and a good face.\nWhat did Patriarch Bai Gnc Mens Vitamin Free Trial Yuchan say was hundreds of years ago.Walking through the Top Rated Sex Pills aisle, Natural Male Libido Supplements I actually arrived at my former hometown.I thought Bai Yuchan was serious nonsense, but now it seems Extenze And Marujuana Having Sex While On Placebo Pills that the argument is not without The reason is similar to what Liu An said.I slapped my face a few times and swelled my face.Four legs slid in the Piness Enlargement air and landed steadily on the cruiser s deck.Not knowing how many animals he ate, this guy was about to bite.\nWhen I went outside, Zhang Peng was asleep on the ground, purring quite Extenze And Marujuana loudly.If her identity is exposed, does it mean there is danger I asked.I opened my hands Free Sample Of Ed Pills and Extenze And Marujuana prepared to give her a kiss.If you grab their territory and cause Yufeng to collapse, you are also responsible.I felt sorry for asking, my eyes were burned by me, and Extenze And Marujuana now this guy closed his eyes tightly and got up from the Extenze And Marujuana ground.The bargaining chip of gold bars is obviously unwilling to lose the money, looking around for iron to hear.\nIt is indeed weird, and I have no confidence at all.The barking of the dog is getting more and more intense, getting closer and closer.Dazuotou no longer played the piano, but got into the three strings.I let the Seven Killers Calcium Male Enhancement slip quietly from his shirt to the ground, slowly crawling through the crowd, to the bottom of the corridor on the second floor, Viagra Online In Ireland and Extenze And Marujuana suddenly passed through the wooden floor, entered through the guy s How To Find Your Ovulation Cycle crotch, Duamind3000 Reddit Erectile Dysfunction and out of his head, the body fell from the second floor.The function of the array is to use the aura of heaven and earth to operate Gad Low Libido on App That Makes Your Dick Look Bigger its own.There are many poor people and many rich people, Zhang Peng said.\nThe water splashed, and About Us Male Enhancement an Paypal Viagra air current shook Hong Luan away, but the iron rod was fine, passing through the water and staying in the air.Ling er took out the wolf teeth and threw it into Extenze And Marujuana the blue whirlpool.Shi Cost Viagra Vs Cialis Qing invited us into the cabin and brought us food and Low Libido Baclofen Extenze Plus 3000 drink.Soon Erbaisanbai locked the chimpanzee Blue Rhino Walmart s hands, and Dabai Extenze And Marujuana leaped forward, hitting Extenze And Marujuana Taking a Male Enhancement the Hydrocodone And Viagra Interaction chimpanzee with How To Find Your Ovulation Cycle a fist on How To Find Your Ovulation Cycle the chimpanzee s face, and the teeth were all knocked out Seeing that the three Icd 10 Erectile Dysfunction Organic of them had already managed the chimpanzee, I Erections On Demand System carried Shi Qing ashore.The unknown old man Extenze And Marujuana The Best Viagra Pills said, I quickly touched How To Find Your Ovulation Cycle my Extenze And Marujuana Taking a Male Enhancement ears, the unknown old Incidence Od Erectile Dysfunction man has disappeared, and How To Find Your Ovulation Cycle I Extenze And Marujuana feel a little sad, but alive.The seven kills Extenze And Marujuana flaming gun swept away the blocking branches, drilled into the depths of the forest, and flew for a while, thinking that the old guy was thrown away As a result, the dense forest in front suddenly made a clearing, and the trees moved one after another, forming a big circle.", "label": "No"}
+{"text": "Every day people like you are meeting up for casual sex sessions or having a bit of late night fun online on Australia's naughty, casual friend finder site – Bang Buddies. If you are just looking for something casual, one night or a more regular arrangement without the stress or exclusivity of a serious relationship, join our exclusive site designed just for people like you. Many horny Aussies use Bang Buddies to find casual sex partners quickly and discreetly.\nJust looking for some new friends and some fun or perhaps you want to experiment and go a little wild? Bang Buddies was created exclusively for adults who want to explore their sexual fantasies and for those who enjoy sex. We're not a regular dating site. Our members are singles and couples looking for physical, sexual partners - either for one night stands or a regular friends with benefits. We expect all our members to be respectful but encourage you all to have fun and feel free to experiment. It's free to join and see what we're about, just use the form on this page.\nSearch - browse - message - meet\nThe quick, free and immediate* account activation means you can be browsing people's profiles in minutes. The ever increasing number of members means there's almost certainly always someone new and horny online. Use the dedicated form on this page to get your free account now. There's no dodgy credit card age check to join - we just need an email address to send your private login details to. *Account activations are immediate but each account will be verified. Our staff remove any member who mistreats the service or other members.\nSign up now for free!", "label": "No"}
+{"text": "- 36 min ago Alaya F Represents The Modern Indian Bride Through Her Recent Magazine Cover And How Beautifully!\n- 2 hrs ago June 2020: Auspicious Housewarming Dates In This Month\n- 2 hrs ago 5 Amazing Benefits Of Sunflower Oil For Skin\n- 2 hrs ago June 2020: A List Of Popular Festivals That Will Be Celebrated In This Month\n- Movies Jennifer Winget Urges Fans To Celebrate Her Upcoming Birthday By Helping Those In Need\n- Sports Coronavirus: European Tour to resume with British Masters on July 22\n- Technology Flipkart Sale: Must Check Out Discount Offers On Premium Smartphones\n- News FM Nirmala Sitharaman chairs FSDC meeting, takes stock of economy amid COVID-19 crisis\n- Automobiles 2020 Datsun Redi-GO Facelift Launched In India: Prices Start At Rs 2.83 Lakh\n- Finance FM Sitharaman Launches Free Instant PAN Card Facility Using Aadhaar\n- Travel 12 Best Places To Visit In South India In June\n- Education CBSE Cyber Safety Handbook For Students Classes 9 To 12\nIsn't it surprising to know that astrology can uncover all the layers of your personality? How can the stars located at such long distances from us make such accurate predictions? Well, that is the greatest mystery and that is what makes this subject such popular. After all, who wouldn't like to know about their own life? Here is another of the astrological predictions, digging another level deep into your personality. Here is what frazzles you the most as per your zodiac sign. Even if you are the most chilled out person in the world, there would be something that definitely stresses you out. Let us explore what it is in your case. Take a look.\nFor sure we would not be wrong in saying that you always worried when you got a grade or two less than what you expected during your school days! And yes, you are actually that kid. So what it explains about you is that work is what stresses you the most. In fact, to such an extent that even when you are already doing well, you are not satisfied. Better is the key goal for you.\nOops! You want order everywhere. How is that possible? Well, that is indeed a reason you get stressed out for, since order seldom comes. You want things and people to be exactly how they are supposed to be, by the rule of law. Not just that, once planned, you want everything to go in alignment with the plan. All ifs and buts stress you out.\nIt's loneliness for the Gemini. Though most Geminis talk less and are a little reserved by nature, this definitely does not mean they like to stay alone. Laughter and friends are all they need. They like listening. When in the company of a friend, they listen to them; and when in their own company, they seriously listen to every thought running inside calculative minds. As obvious as it seems, overthinking induces you to be stressed out.\nIt stresses you out when two of your friends are fighting or even if they are not on good terms. It stresses you out when there is a lot of gossip going on in your group. You like peace and demand it. So when peace is lost, you get stressed out restoring it. When a friend is worried over some issue, it might also make you worried. Lack of peace is what frazzles you the most.\nFor Leos also, work is the biggest stress. But while for the Aries, the stress comes when the work is not good, or as per expectations, for the Leos, stress comes when the work steals away their fun time. In fact, you like those jobs that involve some fun. When the fun element is missing, work is stressful for you and makes you worried.\nVirgos cannot take pressure. They never like being the centre of attention. So when they get ignored in a gathering, they actually do not mind it, since that puts them in the safer zone. They like to play, but only behind the scene. The pressure that comes when people are watching them or the pressure that comes when they are given a very short deadline for a task, is what stresses them out the most.\nJustice! Well, that has become the stress of the world these days. But wait, what justice for a Libran is justice with the work, with people and with time. Deep! They want the day's schedule to be harmonious. When all jobs get done smoothly without having a conflict with time as well as people, is what they want. And when this balance is gone, stress walks in for them.\nA lot of theories that make you doubt somebody is what actually frazzles you. When you have noticed somebody so much that observed theories eventually confuse you, you feel stressed out. Negativity is what you hate and want to run from. So whenever and wherever you get it, it frazzles you.\nSaggitarians are not at all fond of taking responsibilities. Hence, stress comes when they are handed over some responsibility that they never wanted. Looking for adventures, being too serious is what they cannot endure for long. Moreover, they lack patience also. So when things get delayed, it also causes them to worry and thus, stress comes in.\nCapricorns are too serious and take themselves too seriously. Almost anything can stress them out. But most of their stress comes from themselves and no one else. Things like burning a toast, spilling the food over your clothes, or misplacing a small paper clip are sufficient to make you frazzled. You should stop expecting perfection in every little thing.\nLike a Capricorn, while everything has the potential to stress you out, the difference lies in that Capricorn's stress comes from themselves. Whereas, it comes from the outside world for you. When things do not go as per your plans, you get stressed. But the good part is, you never crib.\nAll stories of the past, especially the sad ones, keep coming back to you just to make you worried. You tend to think too much, like a Gemini. But you think only of the past and keep getting worried. You need to understand that the past gets covered when you write new and better stories in the present.", "label": "No"}
+{"text": "Give a gift you know they will love! Our gift cards can be used against any item on our website from our boxes to our Candles and Diffusers.\nPerfect for someone who has a scent profile and would love more items or someone who has yet to begin their journey!\nWe cannot accept returns for our gift cards and they are not redeemable for any cash value.\nThey can be used on any item on our wesites including sale items.\nStandard Shipping 3-5 days £1.99\nExpress Shipping Next Day before 3pm £4.99", "label": "No"}
+{"text": "How to beat candy crush level 86 - candy crush guides, Candy crush level 86 is located in the bubblegum bridge episode. to beat this level you must clear 25 jelly squares and score at least 40,000 points.. Candy crush level 86 tips & strategy: how to beat this level?, Currently stuck in level 86 of candy crush? don’t feel bad; this dastardly level has stumped pretty much everyone since the game’s inception.. How to beat candy crush saga level 86 - 3 stars - no, Subscribe to this channel for updates please rate this video. thank you!!! how to beat candy crush saga level 86 - 3 stars - no boosters - 109,800pts hope.\nCandy crush saga - how to do level 86 - youtube, Visit http://www.toakgames.com for the list with all available candy crush howto's and a weekly new game & more! you can also follow me on instagram. How to beat candy crush level 210 - candy crush guides, Tips & tricks on how to beat level 210 in the game of candy crush. How to beat level 65 on candy crush: 10 steps (with pictures), How to beat level 65 on candy crush. despite being a fairly early stage, level 65 of candy crush is a very serious challenge and, for many players, is one of the.\nHow to beat candy crush level 29 - 4 easy steps - wikihow, Edit article how to beat candy crush level 29. level 29 of candy crush can be challenging to finish as there are two distinct areas that need to be completely cleared.. Candy crush level 125 how to beat tips, help & strategy, How to beat candy crush level 125 help & tips to clear the level 125, you can start with making special candies and combining them. this is indeed a great way to. Candy crush level 245 how to beat tips, help & strategy, How to beat candy crush level 245 help & tips in level 245, creating the right formation is the key for scoring points faster. making combinations is crucial as your.", "label": "No"}
+{"text": "Peeling Back the Layers: A Deeper Dive Into Decollage\nThursdays, Nov. 16 – Dec. 7, 2023\nLive Class Limit: 15\nDecollage is the practice of applying many layers of collage materials, then selectively cutting, tearing and peeling away to reveal lower layers. It’s an enchanting dance between control and chance — ideal for loosening the grip of your inner control freak! It’s ALL about the balance: learn strategies for tuning both serendipity and intention to suit your preferences and artistic objectives. With Kal’s trademark blend of inspiring masterworks, discussion and challenging and fun hands-on exercises, this course will have you embracing both structure and uncertainty as you explore interesting found opportunities. As always, there will be plenty of creative leeway to make your work your own.\nWorking from the comfort of your own home/studio, you’ll connect with fellow collagers through group discussions and real-time exercises during each class, as well as working on a project on your own time between classes.\nWe will be on the easy-to-use Zoom online meeting platform.\nThe course is accompanied by a private Facebook Group where you can upload your finished or in-progress homework, plus see and comment on your fellow classmates’ work. It’s a lively, collegial safe space to share your work, and I offer comments on all work posted.\nRecordings of live sessions are made available to all participants, so if you can't make the live time slot, you can watch it later.\nVideo-only Version: $132\nThe only difference is that you don't join us for the live Zoom class, but rather watch the video replay, which I make available to all enrolled students shortly after each class. You're able to join the private Facebook group (for sharing, support and feedback with/from your fellow students as well as me) and you can email me one or two questions a week to be addressed during class if desired.\nCost: $160 for 4 live classes,\n$132 for video-only version\nYour completed payment secures your spot.\nE-transfer (aka Interac transfer) is preferred.\nTransfer via your online banking.\nJust click on button below for my email address.\nPlease specify this course \"Peeling Back the Layers” in your email.\nOr you can purchase with credit card or PayPal below:\nIf you’ve tried decollage before and been underwhelmed -\nthen THIS is the course for you!", "label": "No"}
+{"text": "Sex may get paid if you click a link in this article and buy a product or service. Instead of a serious partner, you need a satisfying, casual hookup or even a one-night stand. Whether you just got out of a relationship or you need some time to focus on yourself, you’re allowed to be a little bit selfish now and then. The Best Free Sites Sites. The only way to find like-minded people is dating you know where to look. Sure, there are a ton of potential dating services, but if you haven’t been having sex success you’d like so far, it could be the sites you’re using. Mainstream dating options like Tinder have their supporters, and as tonight apps have become more commonplace, they’ve stopped being used for hookups. In other words, they lean sites long-term relationships. If you’re looking for a sites, odds are you’re not dating for typical dating compatibility.\nScammers and Spammers: Inside Online Dating’s Sex Bot Con Job\nPlease refresh the page and retry. Even as lockdown restrictions start to lift, and we can meet prospective partners in the park or soon the pub, dating apps still have a part to play. As the internet plays an ever greater part in our social lives, with sites such as Facebook helping us to keep in touch with our friends, it’s inevitable that we use it to help run our love lives as well.\nModern matchmaking service, eHarmony, claims over half a million couples have found love through their site.\nWhen he saw an ad for the dating site Ashley Madison, which boasted 36 million members and the tagline, “Life is short, have an affair,” he.\nRemember me. Login Please wait\nThe Best Thai Dating Sites in 2020 – & Some Good Advice!\nMullet Mating Got a mullet, want to date someone with a mullet or both? No one will judge your funky ‘do on MulletPassions. With the “Twilight” craze upon us, there’s no denying that there are real?\nBut even though we can’t go out to meet potential new love interests, that doesn’t mean things have to be put on hold. Of course, you can still use apps like Tinder , Bumble and Hinge to swipe through potential love interests, which has become even more popular as people now have more time on their hands to commit to it. In an attempt to keep things interesting under lockdown, dating apps are stepping up.\nMany apps are encouraging virtual dating as there’s no chance of physical contact in the near future. These are the apps that have released new features specifically aimed at helping you find love in the time of corona. You can trust our independent round-ups. We may earn commission from some of the retailers, but we never allow this to influence selections, which are formed from real-world testing and expert advice.\nThis revenue helps us to fund journalism across The Independent.\nThese are the best sex apps for no strings attached sex, but would you use one?\nYour hand-picked selection of the best online dating sites to try, plus how to stay safe online dating and have a successful first date. Advice for everyone Now its about as normal as Internet banking just way more fun. Wondering why you should opt for one of the best online dating sites, not an alternative or more traditional approach?\nThe latest tips and news on Online Dating are on POPSUGAR Love & Sex. On POPSUGAR Sex & Culture you will find everything you need on love, culture and.\nWe connected via an online dating site. She said if a man shared her bed, she felt it would be cheating on her late husband. When she said it, I was surprised and shocked. What are your thoughts on this, and do a lot of widows adhere to this practice? Should this be considered a deal-breaker in a potential relationship? And would replacing the bed with a new one help? What the woman you were talking with was doing was eradicating any expectation you might have had about a sexual relationship with her.\nShe should have specified on her profile that sex was off the table. Be glad she was honest.\nWhether you’re typically introverted or are a pro socializer, getting to know someone you’re interested in or even finding someone to get to know, for that matter is intimidating. It takes the perfect balance of confidence and chill, and if it’s a lady you’re pursuing, chances are she’s received more than a few unsolicited messages already. But if you sit back and play it too cool, you risk getting beelined into the friend zone or chalked up to “not that interested.\nIt’s easy to give up, blame it on being too busy with work , or have a date with some THC instead , but but online dating is a clutch way to avoid the meat market hell hole at the corner bar or nightclub.\nBy Judith Silverstein, Michael Lasky. You need to realize that some people can take an honest answer involving a sexually provocative question out of context because such an answer is word-searchable on most systems. Selecting sex as your answer, when in the context of a thoughtful essay, may not seem particularly provocative. The problem is, a subscriber can easily run a search for all people who are looking for sex. In one experiment, a few women who listed sex as their favorite indoor activity removed that tidbit temporarily from their profile.\nThe number of lewd e-mails they received dropped. In short, what you write may not be what people see. Be careful about tucking sexual answers into otherwise nonsexual questions. On the other hand, the following terms and discussions often turn off people who are seeking a long-term relationship:. Internet dating is no more sexually provocative than face-to-face dating. Likewise, although you find a photo provocative, without eye contact, you lose much of the sizzle. In addition, the feedback you get from eye contact gives you an immediate idea of whether your message succeeded or whether you really screwed up.\nTry that in e-mail! And they have to craft those words entirely in the dark.\nSwiping sucks, so here are the best dating sites for men to find love\nC hristopher Russell owned a small bar in Chesapeake Beach, Maryland, but, like a lot people these days, figured he had better odds hooking up online. Russell was soon browsing rows of enticing women. Shortly after creating his account, he got an alert that one of them had viewed his profile. Her picture, however, was blurred. In order to see more details and contact her, he had to buy credits.\nSingle adults may experience physical and emotional changes during and after cancer treatment. These may affect dating and sexual for.\nOnline dating site and app reviews\nSkip to Content. Single adults may experience physical and emotional changes during and after cancer treatment. These may affect dating and sexual relationships.\nSex or site, that way. I love and advice for men and attraction. Many delay marriage, races, online dating gif her. Join eurodate get more. Best headline for.\nThai dating sites have become extremely popular in the last few years, and many fruitful relationships now begin this way. In my circle of friends, I know of three couples that have met through online dating, and I also know a number of single, English-speaking Thai women active on such sites. Online dating is the modern way of meeting a partner, and statistics show that users will reach nearly m by 1. That said, you should be as cautious about the online dating process in Thailand as you would in your own country.\nFor example: how many members belong to the site, how active the community is, the pricing model and the level of customer service. Online dating is now the preferred way to meet women, and in many ways it’s better than nightclubs, bars and personal introductions, which can often turn into a nightmare. Men traveling on business or going for a holiday in the region can find a date online for their visit. In this post, I’m going to give you some top tips for using Thai dating sites, and provide you with a comparison and overview of my experience with the best.\nIf you can’t be bothered to read the in-depth reviews of each, you can click on the links in the shorter overview list below. Before we look at these sites individually, let’s run through a few top tips to make sure you don’t run into any problems. Thai Cupid has a membership database of 1. Operated by Cupidmedia, a company that owns many other dating sites in a broad range of ethnic niches, TC is probably the most popular dating site for foreign men seeking Thai women.\nIf you want a broad selection of genuine women, with decent jobs — years old — this site is a good place to begin. On my most recent visit I found 2, people online, and over 1, active profiles for the aforementioned age group.", "label": "No"}
+{"text": "Umbilical venous catheter\n Discussion of Umbilical venous catheter\n- Umbilical venous catheters are commonly used in the neonatal period for vascular access.\n- An umbilical venous catheter passes through the umbilicus, umbilical vein, left portal vein, ductus venosus, middle or left hepatic vein, and inferior vena cava to the junction of the inferior vena cava with the right atrium.\n- In contrast, the typically paired, bilateral umbilical arteries initially course caudally to enter the right and left iliac arteries. Therefore, the umbilical venous catheter and the umbilical artery catheter can be easily distinguished on abdominal radiographs.\n- The umbilical venous catheter predominantly follows an anterior and cephalad course in the midline umbilical vein until directed posteriorly in the liver.\n- The umbilical artery catheter is initially directed caudally and posteriorly to enter either the right or left iliac artery before coursing superiorly in the more posteriorly positioned aorta.\n- The preferred location of the tip of the umbilical venous catheter is typically in the cephalad portion of the inferior vena cava or at the inferior vena caval–right atrial junction.\n Anomalous positioning of Umbilical venous catheter\n- Anomalous positioning of the umbilical venous catheter occurs frequently because the catheter is inserted by the pediatrician without imaging guidance.\n- If the umbilical venous catheter follows the normal course to the inferior vena cava or right atrium but is advanced too far, the umbilical venous catheter may extend through a patent foramen ovale or an atrial septal defect into the left atrium or, if advanced farther, into a pulmonary vein. Alternatively, the catheter may continue through the right atrium and into the superior vena cava or may cross the tricuspid valve and enter the right ventricle. If advanced, the umbilical venous catheter may continue into the main, right, or left pulmonary artery.\n- If the umbilical venous catheter reaches the left portal vein but does not continue into the ductus venosus, the catheter can travel left into the more peripheral left portal vein or right, where it can eventually course into the right portal vein or hepatofugally into the main portal vein (or potentially farther into the vessels that merge to form the portal vein: the superior mesenteric and splenic veins).\n Complications of Umbilical venous catheter\n- If the umbilical venous catheter perforates an intrahepatic vascular wall, a hepatic hematoma may result.\n- Intravascular thrombi may form along the course of the umbilical venous catheter.\n- The umbilical venous catheter can also perforate the right or left atrial wall and enter the pericardial space.\n See Also\n External Links\n References for Umbilical venous catheter\n- Tim B. Hunter, and Mihra S. Taljanovic. Medical Devices of the Abdomen and Pelvis. RadioGraphics 2005 25: 503-523.\n- Schlesinger, Alan E., Braverman, Richard M., DiPietro, Michael A. Neonates and Umbilical Venous Catheters: Normal Appearance, Anomalous Positions, Complications, and Potential Aid to Diagnosis. Am. J. Roentgenol. 2003 180: 1147-1153.", "label": "No"}
+{"text": "Girl talks guy to orgasm video\nBelle: I seeking people to fuck\nCategories: Naturism / Nudism, Pole Dancing, Cum in mouth, Sex oral in condom\nAnd I'd say that such a method would be quite useful, since you're still with us, and you're still forcing your eyes to make sense of these words. The vagina is exceptionally durable which means that it can return to its original form quite quickly.\nExtended orgasm for men\nWomen urin during an orgasm\nBeeg Alexis Fawx Cyrstal Rae 9: Good thing you most likely aren't one.\nRecent older mom porno Popular Longest Recent. When they use their muscles to squeeze your cock, it's going to be game over, and you will be embarrassed.", "label": "No"}
+{"text": "Ji Min Sha, 22, is accused of murdering his former roommate, Varun Manish Chheda, 20, after allegedly stabbing him repeatedly.\nA Purdue University student that allegedly stabbed his roommate to death is may seek an insanity defense in his trial, according to reports.\nSha’s attorney, Kyle Cray, filed a motion on Nov. 11 to determine Sha’s competency to stand trial and filed a notice of the use of the insanity defense, according to court documents.\nIn the motion filed, Cray requested the court appoint \"two or three competent and disinterested psychiatrists, psychologists or physicians who have expertise in determining competency to examine the Defendant and report to this Court on his competence to stand trial,\" according to CBS News.\n“This request is based on undersigned counsel’s good faith belief that the Defendant lacks the ability to understand the proceedings and assist in the preparation of his defense,” said the filing, according to FOX 59.\nSha is facing one count of murder in the death of Chheda. The day of Chheda’s death, Sha called police and notified them his roommate was dead in their dorm room. Sha was found wearing bloody clothes in the dorm room when police arrived, according to ABC 7.\nSha is currently being held at the Tippecanoe County Jail with no bond, according to jail records.", "label": "No"}
+{"text": "Marriott Grand Chateau 3 Bedroom Villa\nWhilst every one of us have 1 or 2 handmade ornament on our trees (normally from our children, grandchildren, or other kids inside our life) not many of us make our own add-ons and embellish our individual village scenes with these uniqueness.\nXmas crafts are lovely enough to display on the tree, on the desk, on doors and overhangs, and home windows. Your Xmas village is identical! You are able to leave it up all yr and alter it with the seasons if you have or create the best equipment lodge at jackson village jackson nh.\nThese are treasured traditions, villages which were years inside the earning, residences and outlets that have been handed down or provided as presents. So may be stated on the recollections of time used environment up or developing these beautiful village scenes.\nLots of of us have fond recollections of this Xmas tradition of decking the halls with household, that it is usually a scheduled and shared event. Think of how your home smelled like gingerbread and cinnamon. How the kids sat within the desk generating gifts, crafts, and playing cards with the exclusive persons of their lives. The carols that played or perhaps the television specials which were on - only for this special time of calendar year.\nThese memories and traditions are tied up inside our generations' previous. Up right until the mid nineteenth century all Xmas ornaments had been handmade using whatsoever was conveniently obtainable in that region at that time of yr. Mom and dad would make decorations out of material, pinecones, cedar branches and bits of wax that were meticulously saved all year for this special day.\nClose to 1875 we commenced looking at Christmas ornaments that could be purchased in a very keep - nevertheless the custom of paying out time in building one of a kind Xmas shows lived on. Now we get with each other to build Christmas village scenes as well as other displays that young palms can easily regulate.\nGlass ornaments were being first launched from Germany. The German race was renowned for high quality craftsmanship along with the Christmas decorating accessories was no exception - these items had been really beautiful. Briefly buy the Germans experienced around 4500 molds and about a hundred glass blowing workshops devoted totally to Christmas decor.\nWe have arrive a protracted way since the mid 19th century with our preferences and yuletide decorating, but we certainly are not able to defeat developing Christmas village scenes with our family as portion of our individual, newer, tradition in the season\nRead Also: Jewelry Exchange In Villa Park Il", "label": "No"}
+{"text": "Here’s a pic of the cards we made in the October Kathy’s Handmade Card Class.\nKits are still available.\nWe will be making four Christmas cards! You can pay for a class or kit by going to “Pages” at the right and clicking on “Pay for Classes and Kits”\nHope to see you soon!", "label": "No"}
+{"text": "Students’ Perspective on Corporal Punishment: A Case Study of High Schools Students in Peshawar, Khyber Pakhtunkhwa, Pakistan\nMudasir Khan, Amir Zada Asad, Shakeel Ahmed & Imran Ahmed Sajid\nCorporal punishment has been a part of the education culture not only in Pakistan but the\nentire Indo-Pak subcontinent for centuries. There have been two conflicting arguments of\nteachers and educationists and the liberals who oppose the practice. This empirical study was\nconducted to know the students perspective as a stakeholders. Majority of the Students of\nhighs schools did not support the practice as it badly affects the students’ performance. The\nresults revealed that corporal punishment fails to motivate students for studies. However,\nwhen administered after a mistake, corporal punishment also makes some students realize\ntheir mistakes. It creates hate amongst students against the teachers who use such violent\nmethods of disciplining.\nKeywords: Corporal Punishment, Khyber Pakhtunkhwa, Motivation, Feelings, Teacher, Attitude.", "label": "No"}
+{"text": "Jul 15, 2013, 10:58 AM EDT\nHakeem Olajuwon was the center who took the Houston Rockets to two NBA championships.\nThey want to return there again, albeit with a center who is plenty athletic but not nearly as polished and The Dream was back in the day.\nSo the Rockets are about to hire Olajuwon to mentor Dwight Howard… and you too, Omer Asik. But mostly Howard. That according to the Houston Chronicle.\nOlajuwon’s duties and title are being discussed, and he will spend much of the year at his home in Jordan. But he will work with Rockets interior players, as he does with big men around the NBA each offseason, as a team employee. “We are going to bring him in as full-time as is possible,” Rockets general manager Daryl Morey said Sunday. “It’s not done, but we have mutual interest to get it done, and we’ve had some early discussions. We want him to work with Dwight and Omer (Asik), and he wants to do that.”\nOlajuwon has become the go to mentor around the NBA for players who want to improve their post games. That means not only pretty much ever center currently in the NBA but also players such as Kobe Bryant and LeBron James.\nWhile adding him to work with Howard should certainly help the post moves for Dwight, the fact remains that Kevin McHale and team need to get him more comfortable with running more pick-and-roll — mobility remains Howard’s best asset as a big, yet last season in Los Angeles he was resistant to more pick-and-roll with Mike D’Antoni. Look at it this way: In the last three seasons the best shooting percentage for Howard on post moves is 50.3 percent, but his lowest percentage as the roll man is 74 percent (stats via Synergy Sports). With James Harden and Jeremy Lin Houston could be the best pick-and-roll team in the NBA, if Howard will buy in.\nAnd that is all about Howard, not Olajuwon.\nSep 20, 2014, 3:30 PM EDT\nBlatche can play, but the NBA offers simply weren’t there.\nSep 20, 2014, 2:00 PM EDT\n10-story-high banner will return after a similar one was taken down when James left in 2010.\nSep 20, 2014, 12:28 PM EDT\nSessions could start at point guard for Sacramento.\nSep 20, 2014, 11:00 AM EDT\nUnsurprisingly, Curry supports his backcourt mate 100 percent.\nSep 20, 2014, 9:30 AM EDT\nHe had toe surgery in mid-August.\nSep 20, 2014, 8:00 AM EDT\nThis is what you want out of these guys.\nTyson Chandler says negative comments questioning his impact on chemistry with Knicks were ‘the ultimate shock’\nSep 19, 2014, 11:00 PM EDT\nChandler, now with Dallas, fires back at the Knicks.\nSep 19, 2014, 9:45 PM EDT\nChapman played four years for the Suns, and is facing charges in Scottsdale, AZ.\nSep 19, 2014, 8:15 PM EDT\nMust-read quote from Bogut on how he does NOT want to be perceived.\nSep 19, 2014, 5:59 PM EDT\nThis post is here to make life easier for you when you want to find these at the end of the season and point out how wrong we were.\nUPDATED Report: Timberwolves make push for Eric Bledsoe, Suns not interested in sign-and-trade talks\nSep 19, 2014, 5:11 PM EDT\nIt has to be a sign and trade and Minnesota doesn’t have a lot of leverage here.\nSep 19, 2014, 4:00 PM EDT\n“It was more just becoming a better all-around player, trying to take the next step and become a leader on this team and will my team to win.” —Jeff Green\nSep 19, 2014, 3:28 PM EDT\nAnd you wonder why Phil Jackson is worth $12 million a year to the Knicks organization.\nSep 19, 2014, 2:50 PM EDT\nBudenholzer got thrust into a position with the power a lot of coaches covet.\nSep 19, 2014, 2:07 PM EDT\nSep 19, 2014, 1:30 PM EDT\nBest. Name. Ever.\nSep 19, 2014, 12:47 PM EDT\nHeat point guard one-ups Andre Drummond with trick shot\nSep 19, 2014, 12:44 PM EDT\nWill he make Cleveland’s regular-season roster?\nSep 19, 2014, 12:05 PM EDT\nFull recap from the launch event at Nike World Headquarters in Portland, Oregon, including technical information, details on colorways, and confirmed release dates.\n- Andray Blatche signs deal to play in China next season 0\n- Is Klay Thompson the best two-way shooting guard? Stephen Curry would ‘put him up against anybody.’ 10\n- UPDATED Report: Timberwolves make push for Eric Bledsoe, Suns not interested in sign-and-trade talks 30\n- LeBron James unveils latest signature shoe from Nike: The LEBRON 12 12\n- ProBasketballTalk 2014-15 Preview: Toronto Raptors 10\n- Dwyane Wade credits David Stern’s dress code for improving his style 18\n- Kevin Durant has grown close with Karl Malone 15\n- ProBasketballTalk 2014-15 Preview: Philadelphia 76ers 5", "label": "No"}
+{"text": "Welcome to Dispatches, your round-up of the latest news from the frontlines of the War on Women. Have a story from your state or an idea on how to push back? Share them here and fight back against the War on Women.\nMitt Romney reversed his position on the individual mandate, calling it a “tax.” Not that it matters because Romney has made it clear that if elected he plans on pushing for repeal of the Affordable Care Act anyways. So this must be the message right, based on the Supreme Court decision– Mitt Romney will cut your taxes by repealing Obamacare? We’re doomed if this messaging works. Doomed.\nMore proof we’ve got a long fight ahead in the battle to break the health insurance monopoly: Thousands of California doctors have sued insurance giant Aetna for wrongfully denying claims.\nSo far the nuns of the bus have been rebuffed by Reps. Boehner, Cantor and Ryan. Each one of them had promised a meeting with the nuns, and each one bailed on the last minute. Here’s your GOP leadership, folks. Standing up nuns.\nThe D.C. police face a lawsuit after the alleged harassment of a trans woman.\nA girl born today in Canada faces a 50% chance of being abused at some point in her lifetime.\nHere’s a depressing look at the true cost of Walmart’s low prices.\nWomen’s US Soccer star Megan Rapinoe came out in a recent interview and takes the issue of homophobia in professional athletics right on.\nRep. Barbara Lee (D-CA) gets tested as part of national HIV testing day.\nJulia Bluhm is pretty amazing. The eighth grader started a campaign to get Seventeen magazine to stop photoshopping their models. And it worked.\nThanks for checking back and don’t forget to send in your stories, suggestions and comments. We’ll be back each weekday with the latest in the best and the worst from the War on Women. So long as the battle rages, we’ll cover the latest, so please check back!\nPhoto from araza123 via flickr.\nDisclaimer: The views expressed above are solely those of the author and may\nnot reflect those of\nCare2, Inc., its employees or advertisers.", "label": "No"}
+{"text": "Honey Stinger Organic Energy Chews Fruit Smoothie Description\nA delicious blend of fruit flavors turned into an edible chew. Keep creative energy flowing by providing employees with this snack.\n- Gluten Free\n- 100% RDA of Vitamin C\nIngredients: Organic Tapioca Syrup, Organic Sugar, Organic Honey, Organic Grape Juice Concentrate, Pectin, Citric Acid, Organic Black Carrot Juice Concentrate Color, Organic Annatto Extract Color, Natural Flavors, Ascorbic Acid, Potassium Citrate, Organic Sunflower Oil, Carnauba Wax.\nContains: 95% Organic Ingredients", "label": "No"}
+{"text": "Ad Focus, Inc. offers unique and effective advertising solutions inside and around the Colorado Convention Center plus fun transportation options for convention groups and attendees.\nSome of our products in and around the convention center include: digital billboards, indoor digital kiosks and taxi ads. We offer transportation options to and from the Convention Center and around downtown Denver. Shuttle services for private rental or mobile advertising include: Tuk Tuks (100% electric vehicles; seats up to 6 people), pedicabs and rickshaws (holds 2-3 people), and party bikes (seats up to 16) for group experiences/outings. These may also be wrapped with company advertising or branding.\n- Hours: Mon-Fri: 9am-6:30pm. Appointments available outside of business hours if needed.", "label": "No"}
+{"text": "TCDD recruiting disabled workers interview results have been announced: Turkey State Railways (TCDD) announced on January 20 2017 disabled workers intake interview results.\nHere are the explanations and details from the official website of TCDD;\nFor the handicapped quota deficit occurring in Balıkesir province, 366 will be taken to Balıkesir 1 Signalization and Telecommunication Authority. You should apply to 3. The contact phone number of the 2017.\nCANDIDATES REQUESTED DOCUMENTS;\n- 2 Disability Health Board Report taken from hospitals authorized to issue disability reports\n- 2 Copy of identity card (approved or notary approved by TCDD representative.),\n- 2 Quantity Diploma copy (approved or notarized by the Notary Public and approved by TCDD representative),\n- 2 Soldiers' military status certificate (demobilization, deferment or exemption),\n- 2 Forensic registry record (public prosecutor's office or e-government password) www.turkiye.gov.t is. will be taken from the court.\n- 6 Photo,\n- The service schedule for the implementation of the Law on Social Security and General Health Insurance, if any, subject to any social security institution,\nTCDD WORKER PURCHASE CLICK HERE FOR INTERVIEW RESULTS\nSource : www.kamupersoneli.net", "label": "No"}
+{"text": "The PET Lamp project took off in 2011, firstly in Spain then exported to Colombia. It was then expanded to Chile and subsequently, in 2014, to Africa, with the objective of showcasing its potential.\nThe latest collection, Abissinia, was created in collaboration with local craftsmen of Addis Ababa, Ethiopia. But there is more. Some very special moms joined the initiative. Their only “fault”? To have given birth to twins. In Ethiopia, twins are stigmatized as they are regarded as “not blessed by God”. After discovering the PET Lamp workshops in Colombia and Chile, Emily Cosentino, a North American lady and long-time resident in Addis Ababa, contacted the Spanish firm last May and invited it to develop a project with the locals. This was the birth of the collaboration with the group Mothers of Twins to help the mothers raise public awareness on this issue. The lamps are hand-made by weaving fabric to recycled water bottles.\n“We are foreseeing more adventures in different countries in 2016” declares the company. “PET Lamp is already a self-sustaining project and our team is working hard to meet the expectations generated by the initiative and help it grow even further.”", "label": "No"}
+{"text": "Whatever “it” is, just let it go. Don’t worry about what they said about you. Let go of what happened at work. Don’t be mad if someone didn’t call you back. Let go of the anger and hurt of not being invited. Just let that stuff go. It’s too heavy, it prevents you from laughing, and focusing on something good.\nIf you feel wronged, let it go. You can’t change what happen. So often we take things personally, and it literally has nothing to do with us. Remember people project their pain and hurt onto you. They want and need someone else to feel as hurt as they do. Just let it go. The More You Grow…\nLet it go and don’t let anyone stop you from enjoying yourself. When we spend time trying to figure out why someone said what they said. Or why they left you out. Did you deserve to be treated so unfairly. You are questioning yourself and trying to figure what you did to make them do what they did. You are internalizing something that has nothing to do with you. That is infectious and grows like a cancer.\nShed the confusion, wondering, and questioning. It’s going to put you in a place of darkness. Once you are in this place of darkness for a while, it will become increasingly hard to get out of.\nSo, if anything happened this week or today, let it go. Don’t hold on to yesterday’s trash or any other days trash. Get rid of it, before it starts to stink up your mind, spirit, and body. If you still have no answers then you probably won’t get any. And if you do, it most likely, wont make things better. Let it go. Furthermore, it had nothing to do with you. Make a mental note and set some boundaries.\nBe you so you can be free.", "label": "No"}
+{"text": "Experienced network engineer\n37 ans • Copenhagen\nI’m a network engineer with 15+ years of experience with large-scale IP networks. I’m an expert in routing and networking protocols such as BGP, MPLS and OSPF. I’m currently based in Denmark, and looking to relocate to Spain with my family.\nUniversity Of Copenhagen\nAnglais Langue maternelle Danois Langue maternelle", "label": "No"}
+{"text": "In President Biden’s first one hundred days in office, the newly-appointed U.S. leader has faced harsh criticism for his inaction on the refugee situation at the southern border. During Trump’s time as president, the maximum amount of refugees permitted into the United States per year decreased to 15,000, a number that President Biden was expected to raise during his first weeks in office. Biden did not increase the refugee cap until receiving public blowback, at which point the limit was raised to 62,500 people. Biden spoke out about this issue on May 3, stating that the Trump Administration’s previous number “did not reflect America’s values,” claiming that this country instead “welcomes and supports refugees.”\nAfter facing criticism from both parties for his handling of the migrants at the US-Mexico border, Biden hesitated to sign off on the proposed increase to the refugee cap, despite the separate nature of the border situation and the well-established refugee program.\nFor the next fiscal year, the president has set a goal of 125,000 refugee admissions. He assures the public that his administration is currently working hard to reach an already elevated goal for 2021, but that next year will present the opportunity for a substantial shift in the number of admitted refugees in comparison to the past four years. Following four years of harsh limits of asylum seekers and refugees, it appears as if Biden plans to fulfill his immigration promise, or is at least providing hope to the many migrants awaiting a supportive and motivated presidential administration.", "label": "No"}
+{"text": "A United States court ruling striking down President Donald Trump’s high tariffs on steel imports from Turkey has been welcomed by Turkish exporters and experts alike.\nExperts, however, warn that the Trump administration may appeal the decision or might not even recognize it at all.\nThe administration had in 2018 raised tariffs up to 50% on steel imports from Turkey, causing major losses for Turkish steel exporters.\nThe U.S. Court of International Trade last week ruled that the move was unlawful, saying it was procedurally deficient and singles out importers in violation of the constitutional guarantee of equal protection.\nExporters hailed the ruling, adding that they would file a claim for compensation.\nIsmail Gülle, head of the Turkish Exporters’ Assembly (TIM), said the court's decision was belated but right. Trump's decision to double tariffs lacked any basis and hurt Turkish steel sector exports, he told Anadolu Agency (AA).\nWhile in 2018, before the decision, “Turkish steel industry exports to the U.S. were $900 million, in 2019 they fell to $271 million, a 70% loss,” Gülle said. Turkey has a target of $100 billion in bilateral trade with the U.S., he said.\nAdnan Aslan, head of the Turkish Steel Exporters Association (ÇIB), said Turkish steel exporters suffered due to Trump's arbitrary decision.\n“We will claim compensation for losses,” he said. “If the case goes for an appeal, we will file with the higher courts.”\nIn 2017, the U.S. share of Turkey's total steel exports was 15% but now is only around 3%.\n“The U.S. created a special quota for South Korea, Australia, Brazil, Argentina, Mexico and Canada and doesn't put tariffs on steel imports from these countries.\"\nHe said the ruling will serve as a test case for similar issues, such as with the European Union.\n“Trying to solve the problem through legal avenues is a source of pride for Turkish steel producers,” said Bozkurt Aran, who heads the Trade Studies Center at the Turkish Economic Policy Research Institute (TEPAV).\n“Trump's decision in 2018 was an arbitrary decision. It raised taxes on steel imports from 25% to 50% without getting the opinion of the American steel industry,” he said.\nIn addition, Trump’s citing “national security” reasons for the hike makes no sense because the two countries are allies under NATO, Aran said.\nBut Sait Akman, a senior research fellow at TEPAV, cautioned that it is important how the U.S. responds to the ruling. The Trump administration may appeal the decision or might not even recognize it at all, he said.\n“In this case, Turkey will go to the World Trade Organization and activate the WTO dispute mechanism for resolution, but this is a long process.”\nTrump had imposed 25% tariffs on imported steel and 10% tariffs on imported aluminum from around the world in March 2018 based on “national security grounds.”\nTurkey tried to discuss the move with the U.S., but after this proved fruitless, it applied to WTO.\nIn August of the same year, Trump announced he was doubling the Section 232 tariffs to 50% on steel from Turkey amid tensions over a since-freed American pastor Andrew Brunson, who was detained in Turkey on charges of links to the Gülenist Terror Group (FETÖ) and the PKK terrorist group.\nAnkara retaliated by implementing equal tariffs on some imported products from the U.S.\nThe higher tariffs remained in place until May 21 last year, when Trump reduced them back to 25% in what he said at the time were necessary import reductions.\nLast week, the U.S. Court of International Trade found Trump's decision to double tariffs on Turkish steel unlawful and that it violated the timeline of the Section 232 statute as it requires the president to make a decision based on the secretary of commerce's report within 90 days and then implementing any chosen action within 15 days.\nThe Trump administration did not follow the procedures by expanding the Turkish steel tariffs more than 90 days after the secretary of commerce’s original steel report, the trade court said.", "label": "No"}
+{"text": "Pokie Magic - Highland Fling is an Aussie style 20 payline 5 reel poker machine (also called a slot machine or a \"Pokie\"). It has an exciting Highland Fling feature. Double up any win up to five times.\n|License||Free to try|\n|File Size||358.63 kB|\n|Operating System||Windows Windows 7 Windows XP Windows Vista|", "label": "No"}
+{"text": "07-03-2009, 03:30 PM\nOk a couple questions for someone with knowledge with boxes. To start I have a 12\" Fi Q in a small sealed box right now. I am pretty happy with my setup except for the fact i dont get the sound pressure like some of my friends get with their subs with the same amount of wattage. Would a box change this or would that have to do with something else. I was thinking of getting a box to fit in my 97 grand prix ported for the fi q. any suggestions? ideas?", "label": "No"}
+{"text": "In 2021, the Underground Railroad will emerge again. This time, the pathway will be different. This blog serves as a space for dialogue and resources for Black Americans who are interested in leaving the United States to move abroad or those who are already abroad and are afraid to return the USA due to fear of persecution….but not as an Expat…rather, as an Asylum Seeker – fleeing State Sponsored Terrorism, Genocide, and Police Brutality.\nWho am I? I am taking on the name of a hero: Harriet “Moses” Tubman. I prefer the identity of my hero over the use of “Nobody”; as I prefer to keep my identity anonymous.\nI am an Expert in Migration and Development Studies and a Cultural Anthropologist. I am a nomad and I have lived in 7 different U.S. states and in Ghana & Nigeria.\nThere are two sides to “Migration”, it comprises: Emigration studies and Immigration studies. Development studies focus more on nation state formations, government systems, social systems & networks, economies, (issues surrounding anthropology of the state etc).\nI have a vast and thorough knowledge and understanding of international human rights laws and asylum rights. I also have an extensive background in African & African American Studies with emphasis on the U.S. Civil Rights, and the Civil Rights Movement. I am also an expert researcher, having conducted research in the fields of: migration & development, business analyst researcher for company acquisitions, market research, medical research, immigration research, civil unrest, nation state formation, and human trafficking ..aka slavery.\nDisclaimer: This blog is an expression of my personal opinions and is in no way a representation of, or affiliated with any employer, government entities or organizations.\nIn this blog I will utilize my First Amendment Rights of Freedom of Speech and share information on what Asylum is on an international scale. The reader will learn about:\n- The International Human Rights Laws that the United States is, and has been violating, and provide information on options for seeking asylum in a country outside of the U.S. (are there benefits to this? the answer is “Yes”)\n- International Laws that protect our human rights to live\n- United Nations information on Seeking Asylum\n- Evidence of Trump Administration & State Sponsored Terrorism and Genocide\n- Discussions on Countries of Interests (This blog is organic and will grow information with time as needed.)\n- Provide a chat for dialogue so that we can brainstorm on the country that you are interested in.\n- Explain the difference between begin an Expat and An Asylum Seeker.\nPlease feel free to share, like and comment on this issue. If you ask about a country I will provide any information I can that is within the public domain. The WORLD is YOURS, so seek and you will find what you need to “LIVE” again. Peace and Blessings to you ALL.. Only pure LOVE is manifest from this blog.\nACLU African American Expat African American Global Travel African Americans Abroad Aslyum Asylum seeker Black Exit Black Expat Black Foodie Black Living Abroad Black Love Black Travel Abroad Civil Unrest in USA Excessive Abuse Exodus Expat Exit Harriet Tubman Living Abroad migrant rights Persecution Police Brutality Protection Proud Boys Seattle Times refugee Safety Simple living terrorism Travel Underground Railroad United Nations", "label": "No"}
+{"text": "With the truth as a weapon and a shield\nGranma | December 01, 2017\nPhoto: Roberto Chile\nThis tenet, which along with others is part of Fidel’s conception of Revolution, is rooted in Martí’s idea that “outside of the truth, there is no salvation,” and: “He who tells the truth on time commands. The truth well-spoken, spoken at the right time, dispels his enemies, as if it were smoke.”Read More »\nGranma | November 29, 2017\nPhoto: Roberto Chile\nA close reading of Comandante en Jefe Fidel Castro Ruz’s speeches and interviews, his concept of Revolution seems to take on a special significance, which for decades has marked, and continues to mark, the political life of Cuba. This definition emphasizes a macro-historical change reflected in the process of decolonization and independence in Latin America.\nIt is worth recalling that after the conquest and colonization, and the 20th century wars of independence, the countries of this continent were subjected to political and economic domination by the United States. Read More »\nteleSUR | November 25, 2017\nThe beginning of the Cuban Revolution in 1959 marked a remarkable political, economic and social change in Latin America’s history, especially for Cuban women, who did not just participate in the military victory but also have played a prominent role throughout the building of the socialist nation.Read More »\nGranma | November 26, 2017\nPhoto: Jose M. Correa\nOnce again the historic guerilla brought together a multitude of grateful youth. Once again he showed us the right way, with his index finger pointing to the future. In a cultural-political act at the University of Havana’s historic Grand Staircase – where he spoke to students on many occasions – the generation in which he placed all his trust, gathered one year after his passing, to show that Fidel has not left, and that today, he is more present than ever. Read More »\nGranma | November 24, 2017\nPhoto: Dunia Álvarez Palacios Photo: Granma\nWith moving images, music by Cuban singer-song writer Silvio Rodríguez, and remarks by National Prize for History winner Dr. Eduardo Torres Cuevas, the workshop The Strategic Thought of Fidel Castro Ruz: International Relations and Foreign Policy was inaugurated November 23.\nThe event focused on an in-depth exploration the ideology of the historic leader of the Cuban Revolution in the run up to the first anniversary of his passing. Read More »\nGranma | November 23, 2017\nComandante en Jefe Fidel Castro Ruz announced his concept of Revolution on May 1st, 2001. Photo: trabajadores.cu\nA year after the death of the historic leader of Cuban Revolution Fidel Castro Ruz, and the Cuban people continue loyal to the ideas expressed in his concept of Revolution, announced on May 1, 2001 in Havana.\nThe many lessons of his legacy have proven vital at a time when the country is facing adverse weather events, undergoing necessary transformations, and working hard to build the kind of future to which we aspire.Read More »\nGranma | November 21, 2017\nPhoto: Dunia Álvarez Palacios Photo: Juvenal Balán\n“We are, quite simply, a people that have known how to respond to the moment we are living (…) a people that, when required, was able to give all of its heroism, tenacity, and bravery…Read More »\n“It would be easier for me to stop breathing than to stop being faithful to your trust. Always at your service”\nGranma | August 15, 2017\nIn my possession the promotion to Commander of the July 26 Revolutionary Army; on receiving such a high honor and responsibility, I have sworn to fully comply with this responsibility and work with all my power to accelerate the triumph of the Revolution. Thank you for giving me the opportunity to further serve this most worthy cause, for which I will always be willing to give my life. Thank you for giving me the opportunity to be more useful to our suffering homeland. It would be easier for me to stop breathing than to stop being faithful to your trust. Always at your service.\nComandante Camilo Cienfuegos\nNote to Comandante en Jefe Fidel Castro on hearing the news of his promotion to Commander,\nApril 23, 1958.Read More »", "label": "No"}
+{"text": "Make a draped skirt with this easy tutorial complete with pictures\nHey y’all – I hereby declare this the month of skirts! To kick things off I’ve got a draped skirt tutorial for you. This is a lightweight knit ankle length skirt that hangs open to about the knee with an elastic waistband. No zipper needed for this easy to sew skirt! I have worn it both as you see in these pictures and as a swimwear cover, so it’s a great piece to have.\nWe were lucky to take a trip to Puerto Rico a couple of months ago, and though it was very, very humid and hot, I really loved the architecture and color in Old San Juan. The saturated pinks, blues, yellows and green make my neighborhood look boring by comparison. Wandering the cobblestone streets felt a lot like wandering a European city even though we were still in the United States, and I was glad to have both a breezy skirt and comfortable pair of shoes while we looked around.\nThis skirt is made with a knit fabric that I used on the cross grain because 1)it had a little vertical stretch 2)I liked the stripes running in this direction. I believe this fabric was a viscose/nylon blend. I also really liked the drape of this stretch fabric.\nDraped Skirt Supplies and Pattern\nTo make this skirt, you’ll need\n- Main stretch fabric – at least 2 yards, more or less depending on your size/desired length\n- 1/4 yard of knit fabric for the waistband\n- 1 yard of 1 1/2 inch wide elastic\nCut 1 or two pieces of fabric so that you end up with a flat piece of fabric that is your desired length and 3 times your natural waist measurement. Make sure that the squarish part of the skirt below is enough to fit around your hips. If you’re pear shaped, you might need to make your skirt piece more than 3 times your waist to make sure that the square part is at least the same measurement as your hips. Also remember you can seam pieces of fabric together to get the width you need if your fabric isn’t wide enough.\nNeed some guidance about lengths and other skirt measurements? See this post on how to sew skirts – there’s a chart in there you can download. You can make this skirt in any length from mini to midi length to maxi, so that chart might be helpful to figure out lengths.\nOnce you have your fabric, you’ll want to shape it like the image below, cutting half the skirt into a point and rounding off the other bottom corner.\nYou’ll also need to draft and cut out a waistband piece. Cut a piece of knit that is 4 1/2 inches tall and the same length and your waist measurement. This piece should stretch lengthwise.\nHow to Sew Your Skirt\nFirst, you’ll want to hem before moving on. Sew a rolled hem all along the edge with red lines on the drawing of the skirt panel above.\nThat long triangular extension piece is what we’ll gather up to form the draped front of the skirt. I didn’t bother with gathering stitches, I just hand pleated and bunched the top edge of the extension, pulling it up to be even with the top of the rest of the skirt, as shown below.\nWhen you’re done, that edge should look like the image below. You can either baste or pin these gathers in place. Note that I wore this skirt at my high waist. Depending on where you wear the waistband, you might want to do more deliberate pleats and press them flat with a warm iron before stitching them down to reduce the bulk at the center front.\nNow fold the skirt, wrong sides together, so the gathered/draped edge is on top of the flat edge of the skirt and they overlap about 4 inches at center front. There’s a picture of this step above and a diagram below to help make it clear. Pin the front layers together and baste the overlap.\nAt this point the skirt is still wider than your waistline. Attaching the waistband will gather that in.\nSewing the Waistband\nFold the waistband in half, right sides together, matching the short edges. Sew from the top edge down 2 1/2 inches, backstitch, lift the needle and move the fabric 1 inch, then put the needle back down, backstitch, then sew the last inch of the seam.\nFold that waistband into a loop, wrong sides together and matching raw edges. Press. Pin the waistband at the center front, back and sides to the skirt, right sides together. Stitch through all layers (skirt and both waistband layers) stretching the waistband to match the width of the skirt. Insert elastic through the hole you left in the center back seam.\nUse a hand sewing needle and a blind stitch to sew the opening in the waistband closed.\nAnd you’re done! Find some brightly colored walls and go pose like a tourist. Or add a variation – a ruffle detail along the hem edge would be cute, or you might want to turn the skirt to the side so that instead of opening to the front you have a side slit.", "label": "No"}
+{"text": "Slightly unhinged, but we love her just the same.\nAnna Moulsen is a Northern import with ten years of Brighton living, a promoter of live music and an organiser of ‘Brighton Live’.\nShe likes local/national and international indie/pop/electronica/folk and weird beats.\nCheckout her listings at www.meltingvinyl.co.uk\nSmarter than your average bear Bianco (Dionne’s endearing term) has fingers in many pies. However his main love is music and spandex.", "label": "No"}
+{"text": "Tags: Doosan DX700LC excavator\nThis selection of 40-ton and larger excavators will have you digging up aggregates in record time. Kobelco Construction Machinery America Tackles heavy applications Kobelco’s new SK485 high-performance excavator is the largest of the company’s Mark 9 excavator series. The company says the new ...\nDoosan says its new 72.1-metric-ton crawler excavator is the largest one the company manufactures. Designed for heavy-duty mining and quarrying applications, the DX700LC is powered by a six-cylinder, turbocharged Isuzu diesel engine and has an operating weight of 158,953 pounds ...\nSUBSCRIBE & FOLLOW\n- PHOTOS: Rock & Run 2014 was full of fun for everyone628 Views\n- Mine expansion leaving MnDOT up a creek without a paddle372 Views\n- OSHA cites Nebraska sand and gravel company345 Views\n- How to stay safe while working with a small or short-handed crew159 Views\n- The Underground World Wide Web: A new use for abandoned mines155 Views", "label": "No"}
+{"text": "Sora has different meaning for country to Another\nin arabic sora mean A person walks at night\nor Small river\nin jabanise it mean sky\n\"Sora\" means sky in Japanese\nWell it might sound feminine to people who aren't japanese. Its a unisex name, and a pretty cool one in my perspective. Sora is the meaning of , but also if read with a different sound (in japanese). However if you ask of the meaning of sora from a different origin, the native american, it would mean a chirping songbird, or singing bird soaring something of the like ^you^ but to ell you, in native america the name \"sora\" was a female name. And still is.\nHope I updated you with some good information >w\nThe word 'Sora' is considered as a feminine name and the meaning it conveys is that of sky. The word can trace its origin in the Japanese language and the meaning is not only popular in the Japanese culture to name a person but in some other cultures also the same meaning is used to name people.\nYou can find the word 'Aakash' in the Hindi language which conveys the idea of sky and people in India use the word to name their kids. Even in Hindi there are some synonymous terms that people use to name their kids. The words are 'Gagan' and 'Amber'. But is Hindi the words are considered as masculine and not feminine as it is in the Japanese language.\nSora means king of the sky so watch out for bird pooing on your Head lol\nWas trying to figure out how my last name is SORA, and we are 100% polish", "label": "No"}
+{"text": "THE family of 48-year-old Danish holidaymaker Ivan Andersen are sadly fearing the worst after he mysteriously walked out of Son Dureta hospital on the night of Sunday July 10 and has never been seen again. Mr Andersen was on holiday with his wife and three children at a hotel in Puerto Cristo. They had arrived on July 8. Two days later, Mr Andersen suffered sharp cramps all over his body and fell injuring his face at the hotel. He was taken to a private clinic in Palma, but later started suffering from serious confusion and could not even remember where he was. On the Sunday night he was transfered to Son Dureta hospital, where there is a psychiatric wing, but within hours of being admitted to an emergency ward, Mr Andersen, seriously confused, got out of his bed and walked out of the hospital. Nobody saw him leave and the hospital has told family members that they cannot stop people from voluntarily leaving the hospital. He left behind a bag containing all his money, some clothes and toiletries and the hotel still has his passport and he has not been seen again. A week later his wife returned to Denmark to look after the three kids, but colleagues at work and management raised the money to send Ivan's sister, Lis Nyrup and her husband Tage to Majorca to continue the search. According to Ivan's sister, the family contacted a clairvoyant in Denmark who says that Ivan is lying still on rock waste ground and the family are no longer expecting to find him alive. His sister and brother-in-law have been combing the wasteground and woodland to the north of Son Dureta since Sunday and will continue to do so all week. They have had a meeting with local police and the picture of Ivan has been distributed to all squad cars, but the police are centring their search on the city centre. The family however, is convinced the clairvoyant is correct and hope that the general public will keep their eyes out for Ivan Andersen's body if walking in the woods near the public hospital.\nThe content of comment is the opinion of users and netizens and not of mallorcadailybulletin.com.\nComments contrary to laws, which are libellous, illegal or harmful to others are not permitted');\nmallorcadailybulletin.com - reserves the right to remove any inappropriate comments.\nPlease remember that you are responsible for everything that you write and that data which are legally required can be made available to the relevant public authorities and courts; these data being name, email, IP of your computer as well as information accessible through the systems.", "label": "No"}
+{"text": "Rekindle the flames of your relationship with that special someone by spending a weekend at a romantic hotel. Whether you prefer sipping champagne at a candlelight dinner for 2 or toasting marshmallows beside a cozy fire, this curated collection of accommodations will set the mood for a relaxing and memorable rendezvous. Celebrate Valentine’s Day—or any day—in style at these 10 distinctive lodging options.\n1. Chateau on the Lake Resort, Spa & Convention Center\nUnwind at the hotel’s spa and dine at the Chateau Grille, which serves a popular Sunday champagne brunch. During warmer months, take a free shuttle to the private dock on Table Rock Lake, where you can rent a boat, fish, go tubing, water ski, and ride a personal watercraft. Hotel rates start at $179.\nFun-loving couples will find a host of diversions in and around Branson. Ride the Branson Ferris Wheel, explore Marvel Cave at Silver Dollar City theme park, see a musical performance, watch a choreographed light show at the fountains in Branson Landing, hike at the Dogwood Canyon Nature Park, and sample the bounty at several Ozark wineries.\n2. Bottleworks Hotel\nThe 139-room Bottleworks Hotel pays homage to its former life as a Coca-Cola bottling plant through its name and decor. Glamorous art deco architectural elements complement modern amenities at this gem that opened in late 2020.\nThe historic nature of this AAA Four Diamond hotel means each room configuration is a bit different, but none skimp on space. Room features might include original terrazzo-tiled floors, a velvet sofa, or an open-air terrace. The pet-friendly hotel is a stylish stay, from the billiards table in the lobby to televisions that are at least 65 inches and well-stocked minibars with local favorites in guest rooms. Rates start at $329.\nFor some old-school entertainment, you can play at Pins Mechanical Company in the Historic Bottleworks District. Order a libation and spend the evening bowling or playing pinball, foosball, table tennis, boccie, and more. When you’re hungry, head for the Garage Food Hall, which has live music and more than 20 options for dining and drinks.\n3. 21c Museum Hotel\nKansas City, Missouri\nPops of purple, brass fixtures, original artwork, and high ceilings create cocoons of modern comfort at the 21c Museum Hotel in downtown Kansas City. When making a reservation at the AAA Four Diamond hotel, opt for the Romance Package. You’ll get late checkout, treats by local chocolatier Christopher Elbow, and a bottle of sparkling wine.\nThe boutique property with a contemporary art museum juxtaposes nicely with The Savoy at 21c restaurant, so named because the hotel encompasses the former Savoy Hotel and Savoy Grill. Famous patrons like Harry S. Truman and John D. Rockefeller once dined in the historic space. Hotel rates start at $189.\nExploring Kansas City’s dynamic downtown is easy and free on the KC Streetcar. The line runs from River Market to Union Station and has 16 stops. The Library stop is less than a 5-minute walk from the hotel.\n4. Moonrise Hotel\nSnuggle up at the Moonrise Hotel, a pet-loving boutique hotel that’s never boring. A man-made rotating moon adorns the top of the building. While this AAA Four Diamond property is quirky, it caters to upscale tastes with a full-service restaurant and 2 rooftop bars, one of which is open seasonally. Guest room amenities include upscale bath products and Starbucks coffee. Suites are named for famous people with ties to the city such as Vincent Price, Josephine Baker, and Tennessee Williams. Rates start at $149.\nThe hotel is only 8 blocks from Forest Park, a beautiful urban park with walking trails, a history museum, an art museum, a zoo, a science center, and more. Three concert venues—The Pageant, Delmar Hall, and The Duck Room inside Blueberry Hill—are within walking distance of the hotel.\n5. LondonHouse Chicago, Curio Collection by Hilton\nThe marriage of classic architecture and a modern 22-story glass tower create the luxurious LondonHouse Chicago. Located near the Magnificent Mile, the AAA Four Diamond hotel provides captivating views from inside and out.\nSpend an intimate afternoon indulging in curated sweets during a nontraditional High Tea in the Bridges Lobby Bar. You’ll have views of bustling city streets, Chicago River boat traffic, and neighboring skyscrapers. The magnificent 1923 beaux arts–style structure’s crown jewel is the Tri Level Rooftop Bar. Hotel rates start at $199.\nUse the hotel as a base to experience the Windy City’s urban vitality, from world-class museums to live theater. There’s always something new to experience\n6. The Burgundy Hotel, Tapestry Collection by Hilton\nLittle Rock, Arkansas\nNature enthusiasts paddle the rivers, hike the trails, and bike around Little Rock. Climb the landmark Pinnacle Mountain for a bird’s-eye view of the city or walk along the Big Dam Bridge—one of the world’s longest pedestrian/cyclist bridges, which rises 90 feet above the Arkansas River.\nAfter a day outdoors, unwind at the boutique Burgundy Hotel, which features a Whirlpool Suite with a fireplace. Dine at the award-winning Table 28. Inventive American dishes range from meatloaf to a spiced Peking duck breast. Save some room for a decadent dessert.\nEnd the evening under the stars cuddling up by the poolside outdoor fire pit. You can even surprise your sweetie with a rose petal heart decoration on the bed ($25) or chocolate-covered strawberries ($20). Rates start at $179.\n7. The Lodge at Gulf State Park\nGulf Shores, Alabama\nIt rarely snows in Alabama, but cool February temperatures and amazing views along the Gulf Coast offer the perfect environment for cuddling in places like The Lodge at Gulf State Park, a Hilton Hotel. Snuggle up with your sweetie at a warm fireplace in the lobby, which has a wall of windows that faces the beach.\nWith a focus on sustainability and environmentally friendly operations, the hotel has 350 guest rooms and suites that provide views of either the Gulf of Mexico or of Lake Shelby and Gulf State Park. You don’t have to venture far from the lodge, which is nestled at the 6,150-acre park’s west end, to encounter nature. Bike or hike some 28 miles of trails and boardwalks, and fish off the 1,540-foot-long pier. If you feel adventurous, rent a banana boat or go parasailing. Hotel rates start at $129.\n8. Grand Hotel Golf Resort & Spa, Autograph Collection\nPoint Clear, Alabama\nSet on 550 acres of natural beauty and dating to 1847, the Grand Hotel Golf Resort & Spa drips with Southern charm. Once the site of a Civil War hospital and World War II training operations, the resort blasts a cannon every afternoon in a nod to its rich military history. The AAA Four Diamond resort underwent extensive renovations in recent years that put a polish on this gem that has welcomed the likes of Colin Powell, Margaret Thatcher, Dolly Parton, and other VIPs.\nOverlooking Mobile Bay, the resort’s lush grounds brim with moss-draped oaks, blooming flowers, and ponds inhabited by ducks. Hit the links on 2 meticulously maintained courses and soothe aching muscles afterward during a couple’s massage at the hotel’s spa. Other diversions include bicycling, tennis, kayaking, and catch-and-release pier fishing.\nThe regionally-sourced menu changes seasonally at the resort’s farm-to-table Southern Roots restaurant, but the lovely bay views and chic-yet-casual ambience never fluctuate. It’s one of the resort’s 9 dining and bar options. Following dinner, toast your relationship in the 1847 bar or take a moonlight stroll along the bay. Hotel rates start at $349.\n9. Four Seasons Hotel New Orleans\nLouisiana’s only AAA Five Diamond hotel, the Four Seasons Hotel New Orleans\nepitomizes a luxurious stay in an undeniably romantic city. Upgrade to one of the property’s 65 suites with Mississippi River or cityscape views. Melt away stress in a soaking tub that’s big enough for 2. Or indulge in a Spa De Deux couple’s massage, finishing with champagne on the terrace overlooking the Mississippi River.\nDining and drinks are only an elevator ride away. Two James Beard Award–winning chefs, Alon Shaya and Donald Link, helm the restaurants. Miss River serves New Orleans favorites in a whimsical space, while Chemin à la Mer specializes in coastal dishes with river views. Hotel rates start at $395.\nWhen not nestled in the hotel, there are plenty of ways to spend your days. Stroll through the sculpture garden at New Orleans City Park, admire grand mansions from inside a historic streetcar, roam antique shops on Royal Street, sip cocktails while listening to jazz, or ride a carriage through the French Quarter.\n10. White House Hotel\nCoastal Mississippi’s eclectic assortment of shops, museums, dining, and casinos delights couples looking for an unpretentious getaway. Directly across the street from the Gulf of Mexico, the historic White House Hotel— a modern 75-room boutique property with refreshingly discerning decor—sits in the shade of mature oak trees. Ask for a king suite with a soaking tub and waterfront views.\nFine dining is steps away at Cora’s Restaurant & Bar in the lobby. Sip on an Old Fashioned while ensconced in a private booth. Specializing in Gulf Coast cuisine and seasoned steaks, the restaurant also serves a bountiful weekend brunch. Hotel rates start at $139.\nMarried for more than 40 years, Barbara and Jim Twardowski are freelance writers from Mandeville, Louisiana.\nTravel offers & deals\nHot travel deals\nGet the latest offers from AAA Travel’s preferred partners.\nTravel with AAA\nSee how we can help you plan, book, and save on your next vacation.\nSave big with AAA discounts on tickets to your next adventure.\nTravel with confidence\nPurchase travel insurance with Allianz Global Assistance.", "label": "No"}
+{"text": "Campus Book and Supply Roof Collapses Following Heavy Snowfall\nST. CLOUD -- The roof of a building housing three St. Cloud business has collapsed likely due to last weekend's heavy snowfall.\nThe building on the corner of 9th Avenue South and University Drive, known as the University Crossing building had its roof collapse Saturday shortly after 6:00 p.m.\nMatt Glaesman is the Community Development Director of St. Cloud. He says the roof collapsed in the Campus Book and Supply section of the building. The city has since inspected the building, fenced it off and deemed it unsafe.\nGlaesman says because of the extent of the damage the city has issued the building to be demolished. The demo should happen sometime this week or next. Glaesman says the building owner has been working well with the city.\nAlso within the building is a Subway restaurant and KwikFix Electronics. No one was hurt during the collapse.", "label": "No"}
+{"text": "Analysis and Trade Signals User Guide.\nAnalysis and Signals is a membership level designed to help traders that are struggling to make consistent profit in the markets by giving them the option to take the same trades that our professional traders are looking at. Not only do you get the complete analysis and reasoning behind our trade decision but you also get the exact set up with entry price, stop loss and take profit levels. We do offer a free version of the Analysis and signals but it is much more simplified and can be left open to interpretation. Below you can see the difference between a Free signal and a members signal.\nFree Signal Service(available through the facebook page)\nWE DO NOT PUBLISH ALL OF OUR TRADES IN THE FREE GROUP\nAs you can see it is quite basic with a light description of why we are taking the trade and a rough area of entry. If you have your own trading system and are just looking at our service to give you direction then join the facebook group and the free signals will be just what you need.\nMembers Signal Service\nAs you can see from the chart and written analysis above , the membership description gives you a much more detailed trade analysis with all the extras you need to take the trade. With the Membership you also get access to the Whats App group so when we make any adjustments to trades you will know straight away even if you are not at home.\nHow it works.\nWe post our trade set and leave trade set ups the evening before at around 8 pm GMT. All these trades are set and forget so you don’t have to be constantly checking your phone for trade releases. Once you have received the trades simply set them up on your own trading platform and forget about them until the following evening. You will receive the trade details via Whats App (You must send us your mobile number and country code form available in the members area once you have signed up to the service) and all the analysis for these trades will be in the members signals area. We also have an “on the pulse” signal service that will come through on Whats App which will need quick response but of course it is up to you whether you want to take advantage of these trades.\nOnce you are added to the whats app group you will receive messages that look like this:-\nThese messages will give you all the information you need to place your trade, all you have to do is open your trading platform and copy the settings into you brokers platform.\nIf you are new to trading and unsure how to set up a trade then we have a short training video on the website that will explain each feature of the email and how to translate that onto your trading platform. You will be sent the link to access the training video’s once you sign up to the membership package.\nOnce you have access to the members area you will also be able to see the in-depth analysis and the reasons behind the trade, a great learning tool if your ambition is to become a full time trader. You will also be able to see the updates to the trade as they appear on the published signal in the members area. So if you choose not to use Whats App you can still get the updates. Below is the same trade illustrated above with the updates in the members area.\nAlthough we might lock in profit on some trades by moving the stop loss and informing you via whats app and the members’ area it is not compulsory as the trades are designed to be set and forget.\nIf you have any questions about how to use the signal service then please contact support and we will do everything we can to help you.\nDisclaimer: Any and all opinions, commentary, news, research, analyses, prices, or other information contained on this website are provided as general market commentary, and do not constitute investment advice nor a solicitation and there are no guarantees associated with them. We are not liable for any loss or damage, including without limitation, any loss of profit, which may arise directly or indirectly from use of or reliance on such information. We have taken reasonable measures to ensure the accuracy of the information on the website. The content on this website is subject to change at any time without notice.\nForeign Exchange market (FX, Forex) is very speculative in nature, involves considerable risk and is not appropriate for all investors. Therefore, before deciding to participate in off-exchange Foreign Exchange trading/Forex, you should carefully consider your investment objectives, level of experience and risk appetite. Investors should only use risk or surplus capital when trading Forex because there is always the risk of substantial loss. Most importantly, do not invest money you cannot afford to lose. Any mention of past performance is not indicative of future results. Account access, trade executions and system response may be adversely affected by market conditions, quote delays, system performance and other factors.\nCommodity Futures Trading Commission: Futures, Options and foreign currency trading have large potential rewards, but also large potential risk. You must be aware of the risks and be willing to accept them in order to invest in the Forex/futures and options markets. Don’t trade with money you can’t afford to lose. This is neither a solicitation nor an offer to Buy/Sell Forex/futures or options. No representation is being made that any account will or is likely to achieve profits or losses similar to those discussed on this web site. The past performance of any trading system or methodology is not necessarily indicative of future results.\nCFTC RULE 4.41: HYPOTHETICAL OR SIMULATED PERFORMANCE RESULTS HAVE CERTAIN LIMITATIONS. UNLIKE AN ACTUAL PERFORMANCE RECORD, SIMULATED RESULTS DO NOT REPRESENT ACTUAL TRADING. ALSO, SINCE THE TRADES HAVE NOT BEEN EXECUTED, THE RESULTS MAY HAVE UNDER-OR-OVER COMPENSATED FOR THE IMPACT, IF ANY, OF CERTAIN MARKET FACTORS, SUCH AS LACK OF LIQUIDITY. SIMULATED TRADING PROGRAMS IN GENERAL ARE ALSO SUBJECT TO THE FACT THAT THEY ARE DESIGNED WITH THE BENEFIT OF HINDSIGHT. NO REPRESENTATION IS BEING MADE THAT ANY ACCOUNT WILL OR IS LIKELY TO ACHIEVE PROFIT OR LOSSES SIMILAR TO THOSE SHOWN. CURRENCY TRADING INVOLVES HIGH RISK AND YOU CAN LOSE A LOT OF MONEY.", "label": "No"}
+{"text": "Software Engineering, Project Management, and Effectiveness\nSources of Insight is ready for action. It's my blog focused on proven practices for personal effectiveness for work and life. I started it a while back to help you sharpen your skills and to grow your personal capabilities.\nThe big idea is to help people \"stand on the shoulders of giants\", drawing from great books, great people, and great quotes.\nThe big change is the user experience. I upgraded the theme to a modern and responsive design, so now you should be able to read it more easily, even from your phone. The other big change is that it's easier to explore the knowledge base more easily. With the new menu, I got the chance to better surface key topics for you, such as Emotional Intelligence, Personal Effectiveness, Leadership, Personal Development, and Productivity. It's also easier to dive right into the articles or browse by key topics. It's also easier to explore key resources like Checklists or How Tos.\nGreat Books, Great People, and Great Quotes are also front and center. With Great Books, you can easily browse the best business books, the best leadership books, or the best time management books. With Great People, you can browse lessons learned from Tony Robbins, John Wooden, Stephen Covey, and more. With Great Quotes, you can browse timeless wisdom from folks like Confucius, Buddha, Gandhi, and more.\nIt’s life wisdom at your fingertips.\nSources of Insight is meant to be a \"Garden of Greatness\" where you can find specific tools and techniques to help you get the edge in work and life. It also features guest posts from best-selling authors and experts from around the world, who share what they do best.\nIt’s a work in progress. Your feedback is always welcome to help shape it to something more useful, relevant, insightful, and actionable. I’ll be focusing on sharing a lot more principles, patterns, and practices for key topics in the near future.\nThe simplest way to get the updates from Sources of Insight is to subscribe -- either subscribe by RSS or subscribe by email.\nI’ll add more social features in the future, meanwhile, I’m still exploring the best ways to create an effective platform that’s simple and scales. It’s up to 210,000 monthly readers now, so I’m trying to focus on slow growth, with a strong platform.\nWhile the overall site is focused on personal effectiveness, and especially topics like emotional intelligence, personal development, leadership, and productivity, be sure to let me know if there are scenarios or topics, you’d like me to address.\nThis past January, more than 20,000 people got the book that’s changing lives, and changing the workplace:\nGetting Results the Agile Way: A Personal Results System for Work and life\nYou’re going to want to read this if you want to level up in work and life, or share it with a friend you know that you want to help give the edge.\nI’m going to walk through how I use Agile Results to show you how YOU can seriously and significantly amplify your impact, get better performance reviews, and spend more time doing what YOU enjoy. (So, while this post might seem all about me, it’s really about you.)\nI’m not going to make it look easy. I’m going to make it real. I care way more that you get the full power of the system in your hands so you can do amazing things and get exponential results. Agile Results is not a fly-by-night. It was more than ten years in the making.\nKeep in mind, it’s an ultra-competitive world, and what you don’t know can hurt you. On the flip side, what you do know can instantly boost your creativity, productivity, and impact in unfair ways.\nUse Agile Results as your unfair advantage.\nNow then, let’s roll up our sleeves and get to it. But first, some context …\nI use Agile Results as a personal productivity and time management system.\nIn one line, it's my \"personal results system for work and life.\"\nI also use it to lead distributed teams around the world. I use it to drive high-impact projects, and for projects at home.\nThis post is a detailed walkthrough of how I use Agile Results as a time management and productivity system for making things happen.\nBefore we dive into the details, I want to make an important point ...\nThe simplest way I use Agile Results is as follows:\nI write down Three Wins that I want to accomplish for the day on paper.\nYes, that’s it, and it is that simple (to at least, that’s how simple it is to start using Agile Results.)\nIf ever I get off track (and I do), the simple way I get back on track with Agile Results, is I simply write down my three wins for the day, down on a piece of paper. Agile Results is both forgiving and instantly useful.\nThe main goal of Agile Results is to help me spend more time where it counts. I needed a light-weight and flexible system that I could use for myself or for others. For several years, I had to build up a new team every six months. I needed to build high-performance teams under the gun, as quickly as possible. And, at the same time, I wanted work to be a place of self-expression, where you live your values, give your best where you have your best to give, and experience flow and continuous learning on a regular basis.\nI needed to get \"Special Forces\" results, from individuals, and from the larger team. So I needed a system that could stretch to fit ... either scale up for a team, or simply help an individual get exponential results. I wanted it to be based on timeless and self-evident principles, rather than tools or fads. And I wanted it to \"play well with others\" ... where if somebody already had an existing system, or favorite tools, Agile Results could just ride on top and help them get more of what they already use.\nAbove all, it had to be as simple as possible.\nHaving a system that’s as simple as possible, helps support you while you do the impossible.\nWith that in mind, let's dive in. So here is how I use Agile Results ...\nMy favorite startup routine is:\nIt's a simple routine. I've learned that one of the keys is carving out time for what's important, first thing in the morning. What I like about this routine is that it's not chaotic. It's serene by design. I've had chaotic startup patterns. This is the one that I purposefully made the morning about exercising, eating, and setting the stage for a great day. I don't turn on the TV. I don't watch the news. I don't check my computer. All of that can wait until I'm in the office.\nIt's how I charge up.\nMonday is all about vision for the week.\nFor example, if the week were over, and you were looking back, what would be the three big things you want under your belt?\nIt's such a simple thing, but I make the most of the week, by starting with what I want out of the week. On Monday mornings, my main starting point is Three Wins for the Week. I identify the top Three Wins that would make this week great. To do so, I jump ahead and imagine that if this was Friday, what would I want to rattle off as my three wins under my belt. I do this on my way to work, while listening to my favorite songs. I play around with possibilities. I think of what big wins would look like. I also think about the big, hairy problems need attention. I try to balance between addressing pain, and acting on opportunities.\nIf I really get stuck, I try to think of the top three things that are top of mind that really need my attention. If I'm going to invest the next week of my life, I want to make sure that I'm nailing the things that matter.\nThe key is that I use very simple words. I'm effectively choosing labels for my wins. For example, \"Vision is draft complete\" is simple enough to say, and simple enough to remember. If I can't say it, it's not sticky.\nWhen I get to work, I scan my mail. I think of my inbox as a stream of *potential* action. I walk the halls to beat the street. I absorb what I learn against what I set out to do for the week. If necessary, I readjust. If I catch my manager, I do a quick sanity check to find out his Three Wins for the Week, and how I'm mapping to what's on the radar.\nFor each project on my plate, I have a simple list of work items. This gives me \"One Place to Look.\" This also helps me identify the \"Next Best Thing\" to do. It's this balance of the lists with what's top of mind, that keeps me grounded. I try to support my mind, with just enough scaffolding, but let it do what it does best. If I can identify the big outcomes for the week, I don't have to get caught up in the overhead of tracking minutia.\nOn my computer, I keep notepad open so that I can list my three wins at the top for the week, list my three wins for the day, any tasks or things on my mind below that. It's important that I keep my mind fresh and ready for anything. It's also where I do my brain dump at the end of the day (\"Dump Your State\"), which is simply a dump of anything on my mind or pending issues, so that I don't take work home with me, and I can pick up from where I left off, or start fresh the next day.\nEach day of the week, the most important thing I do at the start of the day, is identify Three Wins that I want for that day. I write them down. I cross-check them against the Three Wins that I want for the week.\nFirst I brainstorm on what I want or need to achieve for the day. This is just a rapid brain dump. If I'm at my desk, I write it down on paper. When I hone in on what seems to be my three key wins for the day, I say them out loud. Verbalizing them is important, because it's how I simplify and internalize them. Being able to say them, keeps them at my mental finger tips. It's like having the scoreboard right in plain view. I want them front and center so that I can use them to help me prioritize and focus throughout the day.\nI try to put my \"Worst Things First\", either in the start of the week, or the start of the day. The worst thing is to have something looming over me all day or all week. The other way I look at this is, if I jump my worst hurdle, then the rest of the day or the week is a glide-path.\nIf my worst thing is time consuming, then I might need to \"Timebox\" it, such as spend no more than an hour max on it. If the work is intensive, I might tend to split it up, and work through it in 20 minute batches, and take 10 minute breaks. If I'm on a roll, I might go straight for an hour. If this is regular work that I need to do, that I really don't enjoy doing, then I try to either get it off my plate, or find a way to make it fun, or \"Pair Up\" with somebody. I find somebody who loves to do what I hate doing, and see if they might like to show me, either why they love it, or how to do it better, faster, and easier. This practice has taught me so many new tricks, and it's also helped me appreciate some of the deep skills that others are good at.\nI know my peak times and my down times during the day. For example, at around 11:00 AM, I have lunch on my mind, and 3:00 PM is effectively siesta time.\nMy best hours tend to be 8:00, 10:00, 2:00, and 4:00.\nThey are the hours where I am in the zone and firing on all cylinders. I’m generally more “productive” earlier in the day, and more “creative” later in the day. I don’t know all the reasons why, but what I do know is it’s a pattern. And by knowing that pattern, I can leverage it.\nWhat I do is I push my heaving lifting into those hours as best as I can. I use my best horse-power to plow through my work and turn mountains into mole-hills. When I don’t use those peak hours, somehow mole-hills turn into mountains, and it’s slow going. It’s the difference in feeling between riding a wave, and pushing rocks uphill.\nTo get to this point, I simply had to notice during the week, when my best hours really are, not just when I want them to be. Now that I know my best times for peak performance, I have to defend those hours as best I can, or at least know what I am trading off.\nWhen it comes to defending your calendar, you need to know what’s worth it. Once you know your best Power Hours, you know what’s worth it.\nAside from spending more time in my high ROI activities, and playing to my strengths, my Power Hours amplify my productivity more than any other way.\nThis is the space of creative breakthroughs and innovation. It’s not that I’m not creative throughout the day, but I generally have a pattern where I’m more creative at night, or in the quiet hours of the morning. I’m also more creative on Fridays and Saturdays.\nI can try to change the pattern, but I can also first notice the pattern and leverage what already exists. If I know the times when I’m most creative, I can start to use this time to think and brainstorm more freely.\nAnd, I do.\nThat’s how I come up with ways to do things better, faster, and cheaper. It’s how I figure out ways to change the business, or ways to change my approach, and ways to take things to the next level.\nWhen I’m in my creative zone, I do more exploration. I follow my thoughts and play out “what if” scenarios. I value the fact that my Creative Hours lead the ideas that help me learn and improve whatever I do.\nA simple check, if I’m not flowing enough ideas or if I’m feeling too much nose-to-the grindstone, is I ask myself, “How many Creative Hours did I spend this week?” If it’s not at least 2, I try to up the count.\nCreate Hours are my best way to decompress, absorb and synthesize, which ultimately leads to my greatest breakthroughs.\nDay is done, gone the Sun. From the lakes, from the hills, from the sky.\nBut how do you put it to rest?\nI like a deliberate switch from work-mode to home-mode. I don’t want to bring my work home with me, and have it seep into everything I do. When I’m at work, I work hard (and play hard, too … especially because I treat work like play, and drive it with a passion.)\nBut when I shut down my work day, I need a way to unwind.\nI found the best way to free my mind, is dump it down. So I simply dump it to notepad, or my little yellow sticky pad. Any open issues or challenges or things on my mind. I can always pick them back up. Or, I can let them go.\nBut the last thing I want is for a bunch of problems to be swirling around in my head.\nBesides, if you stop swirling problems around in your head, you make space for creative insights, and the answers start to pop out of the woodwork.\nAnother pattern I’ve adopted is to use a metaphorical tree in my mind to hang my hat of problems on. Again, I can always pick them up again tomorrow, but for now, I’ll stuff my problems in this hat, hang them on the tree, and free my mind.\nWhat if every Friday you could get smarter about your productivity and effectiveness?\nI know it sounds simple, and it is, but remember that one of the big keys in life is not just knowing what to do, but doing what you know.\nFriday Reflection is a perfect chance to ask myself two simple questions:\nThat’s how it starts.\nI keep a simple recurring 20-minute appointment with myself for each Friday morning. It’s often the most valuable 20 minutes I spend each week. It’s where I actually reflect on my performance. Not in a critical way, but a constructive way. I explore with simple questions:\nFriday Reflection is how I learn to master my capacity and be more realistic about my own expectations. I tend to over-estimate what’s possible in a week (and underestimate what’s possible in a month.) This little feedback loop, helps me see the good, the bad, and the downright fugly.\nThe most important outcome of my Friday Reflection is, three things to try out next week to do a little better.\nThe little better adds up.\nThe main thing to keep in mind is that Friday Reflection gives you deeper insight into your strengths and weaknesses in a way that you instantly benefit from. The key is to carry the good forward, and let the rest go, and to treat it as a continuous learning loop.\nYou only fail when you give up or stop learning or stop trying.\nTo make my month more meaningful and to add a dash of focus to it, I identify my Three Wins for the Month. At the month level, I can take a step back and look at the bigger picture. Asking myself, “What do I want under my belt when the month is over?” is a powerful and swift way to create clarity, and identify compelling outcomes.\nSince I'm leading a team, I go a step further. I think of Three Wins for the team. Based on everything that's on our plate, I try to identify what the Three Wins for the team should be. I try to figure out things that would be easy to share with my manager. This makes it easy to check alignment, and it makes it easy for them to sell our impact up the management chain. (Read – It helps you get better performance reviews.)\nWhen I get to work, I send out a short mail to the team, with the subject line: WEEKLY WINS: 2012-07-23. It's simply WEEKLY WINS, plus the current date. I briefly summarize the drivers, the threats, and hot issues on our plate, then list the Three Wins identified. I follow this by asking the team for their input, and whether we need to recalibrate. At the bottom, I simply do an A-Z list of bulleted items to dump the full working set of work in flight. It both helps people see what the full scope is, as well as help us rationalize whether we bit off the right things, and it helps people stay on top of all the work. It's like a team To-Do list. Sometimes it's a crazy list, but the three wins at the top, help keep our sanity and focus at all times.\nIt's a simple approach, but it works great for distributed teams, and it gives us something to go back and check at the end of the week, or throughout the week to remind ourselves of what we set out to do.\nSince my manager adopted Agile Results too, he shares his three wins for the week to the team in a simple mail. Folks across the team, simply add their wins for the week. It's nothing formal ... it's more like a simple assertion of our intended victories.\nDuring our team meeting, our manager goes around the team, and we share our three wins from last week, and our three wins we plan for this week. This helps everybody across the team stay connected to what's going on.\nI need to throw in this tip, because it’s the single most effective way I’ve found to get a team on the same page, and avoid a bunch of email. And, it’s a simple way to create clarity, and avoid confusion.\nIt also builds the discipline of execution.\nAll you do is meet for ten minutes each day, Monday through Thursday. I call it, Ten at Ten.\nI found ten at ten to be one of the most effective times in the day to do a sync. That said, because I always have distributed teams, I’ve had to vary this. But for the most part, I like Ten at Ten as a reminder to have a quick sync up with the team, focused on creating clarity, debottlenecking any issues, and taking note of small wins and progress.\nThe way it works is this:\nYou’d be surprised at how quickly people start to pay attention to what they’re working on and on what’s worth working on. It also helps team members very quickly see each other’s impact and results. It also helps people raise their bar, especially when they get to hear and experience what good looks like from their peers.\nMost importantly, it shines the light on little, incremental progress. Progress is the key to happiness in work and life.\nOne thing I’ll point out is that the Monday meeting is actually 30 minutes, not 10 minutes, since it’s more of a level set for the week, and it’s a chance to figure out the Three Wins for the Week.\nWell, there it is.\nIt might not look like a simple system for meaningful results, but when you think of all the synthesis it is effective.\nThe way to keep it simple is to always start simple. Whenever you forget what to do, go back to the basics. Simply ask yourself,\n“What are Three Wins I want for today?”\n- OR -\n“What are Three Wins I want for this week?”\n- OR -\n“What are Three Wins I want for this month?”\n… if you’re feeling really bold, and want to go for the gold, “What are Three Wins I want for this year?”\nHopefully, this little walkthrough helps you easily see how you can apply Agile Results to your workflow, and get more out of the time you already spend. If nothing else, remember this:\nValue is the ultimate short-cut.\nWhen you know what’s valued, you can target your effort. When you know the high value activities, you can focus on those.\nWhat Agile Results does is streamline your ability to flow value, for yourself and others.\nPure and simple.\nAnd that’s how getting results should be … elegance in action.\nI was watching a video on Google Glass with Robert Scoble, and I couldn’t help but wonder about all the possibilities that technology can bring to the table.\nWearable computing bridges the gap between the real world and the things we see in Sci-Fi movies.\nOf course, when we overlay information on our world, the key will be turning information into insight and action. All change isn’t progress, and the market will flush out things faster than ever before. And, to the victor go the spoils.\nIn the video, you can see how the Google Glass does a few basic things so far:\nThe big limit in what it’s capable of, so far, seems to be the batter power. And of course, a key concern was security. It’s another reminder how in the software space, security and performance always play a role, even if they are behind the scenes. In fact, that’s the irony of software security and performance, they are at their best when you don’t notice them.\nSecurity and performance are often unsung heroes.\nThe big take away for me is that the game is on warp speed now. By game, I mean, the business of software. You can go from idea to market pretty fast. So the big bottlenecks range from the right ideas, to the right people, to the right strategy, to the right execution.\nBut more importantly, the reminder is this:\nCompanies with smart people, data-driven insights, a culture of innovation, great software processes, customer focus, and reach around the world, can change the world -- at a faster pace than ever before.\nWho knows what we’ll be wearing next?\nI’m always on the lookout for the best insight and action you can use for work and life. I especially enjoy when I find somebody who is truly a thought leader, a giant in their space.\nAfter all, I’m a big fan of helping everyone “stand on the shoulders of giants.”\nElizabeth is a giant (actually, more like a Titan) in the field of management. She brings to the table more than 30 years of experience in the art and science of management. She’s a former McKinsey partner, a holds a PhD from the Massachusetts Institute of Technology’s Sloan School of Management, and she is the author of McKinsey’s Marvin Bower, and The Definitive Drucker.\nShe knows her stuff.\nSo I asked her to share her stuff.\nElizabeth has written a powerful guest post for me on her best lessons learned in the art and science of management:\nManagement Lessons of a Lifelong Student, by Elizabeth Edersheim.\nShe reveals the secrets of the best managers and best leaders, and puts it right at your fingertips. Every now and then you read something that changes your breadth or depth on a topic. This is one of those posts.\nIt’s a wealth of insight and action.\nKeep in mind that Elizabeth operates at multiple levels of management, so whether you are a line-leader or a CEO, Elizabeth has distilled some key insights you can immediate apply, or refine your thinking, or perhaps lead to a new “ah-ha” moment.\nEnjoy, and may the best practices for management serve you well, whether you’re shaping your own business or the business around you.\nIf you find you can't keep up with the world around you, then break things down. Breaking things down is the key to finishing faster.\nBreaking things down is also the key to agility.\nOne of the toughest project management lessons I had to learn was breaking things down into more modular chunks. When I took on a project, my goal was to make big things happen and change the world.\nAfter all, go big or go home, right?\nThe problem is you run out of time, or you run out of budget. You even run out of oomph. So the worst way to make things happen is to have a bunch of hopes, plans, dreams, and things, sitting in a backlog because they're too big to ship in the time that you've got.\nWhich brings us to the other key to agility ... ship things on a shorter schedule.\nThis re-trains your brain to chunk things down, flow value, chop dependencies down to size, learn, and, move on.\nBest of all, if you miss the train, you catch the next train.\nWhat do Bill Gates, Steve Jobs, and Walt Disney teach us about building a culture of innovation?\nI put together a comprehensive collection of innovation quotes. And by comprehensive, I mean more than 100 of the greatest thoughts on innovation, all at your finger tips. You’ll hear from Edison, Mozart, Michael Porter, Peter Drucker, Seth Godin, and more.\nAnd, to make the innovation quotes more meaningful, I’ve grouped them into useful categories, so you can flip through the sections you care about the most. There’s a section on Action, Birthing Ideas, and Continuous Learning and Growth. You’ll also find a section on Fear and Failure. After all, success in innovation is often a numbers game. Remember what Edison taught us.\nJust because it’s a comprehensive collection of innovation quotes, doesn’t mean it’s complete, or that it’s a done deal. There’s always room for improvement (and innovation.) So if you have some favorite innovation quotes that I’ve left out, please let me know. I want this collection to be truly insightful, and most importantly, actionable.\nAfter all, what good are good ideas, if you can’t turn them into results.\nAnd that’s the truth about innovation.\nI read a lot. I read fast. I go through a lot of books each month. Books help give me new ideas and ways to do things better, faster, and cheaper. Books are one of the best ways I get the edge in work and life.\nHere are the 5 of the best books I’ve read recently, along with links to my reviews:\nWhen Can You Start?, as the name implies, is all about turning interviews into job offers. It’s a quick read and it tackles many of the common pitfalls you can run into during the interview process. Best of all, it provides a methodical approach for preparing for your interviews, by using your resume as a platform for telling your story in a relevant way. If you’re trying to find a job, this is a great book for helping you get your head in the game, and stand out from the crowd, during the interview process.\nAdvices is for Winners is a cornucopia of insights and actions for creating an effective board of advisors to help you in work and life. I thought it would be a fluff book, but it was actually a very technical guide. It's written by an engineer, so the advice is very specific, and very data-driven. It includes a lot of lists, such as 6 benefits of getting advice, 22 questions for scoring a scenario, and 28 reasons why people resist advice. Mentors are the short-cuts and getting better advice is how you get ahead.\nThe Power of Starting Something Stupid is all about how to crush fear, make dreams happen, and live without regret. In the forward, Stephen Covey wrote: \"It reminds each of us that all things are possible, that life is short, and to take action now.\"\nStories that Move Mountains introduces the CAST system for creating visual stories. It’s a powerful book about how to improve your presentation skills using storytelling and visuals. I ended up using some of the ideas in one of my presentations recently to senior leadership, and it helped me prioritize and sequence my slides in a far more effective way.\nIt's Already Inside directly addresses the question, \"Are leaders born or made?\" The book is a really great synthesis of the leadership habits and practices that will make you a more productive and more effective leader.\nEach of these books has something for you in it. Of course, the challenge for you is to dive inside, find the gems that ring true for you, and apply them.\nEdward de Bono wrote that scientists and engineers had proven that man-powered flight was impossible because a human couldn’t generate enough horsepower to raise a plane off the ground. Then Paul MacCready did it successfully because he didn’t know it was impossible.\nWhat would you do if you didn't know it was \"impossible\"?\nAs Walt Disney said, \"It’s kind of fun to do the impossible.” Disney was a dreamer and a doer. He was a man of action. He said, “The way to get started is to quit talking and begin doing.” Walt Disney turned dreams into reality. According to Walt Disney, the secret of turning dreams into reality is the four C’s: Curiosity, Confidence, Courage, and Constancy. (See Walt Disney Quotes for a more comprehensive list of Walt Disney’s mantras and thoughts.)\nWhen you study success, “action” is the active ingredient. Edward de Bono agrees that there are \"describers\" and \"doers\", where describers are happy enough just to describe or explain something in detail, while \"doers\" use action to test their ideas and get feedback.\nEdward de Bono is fan of combining thought with action: “… there is a continuous synergy between though and action. The suggestion is that you cannot smell a flower at a distance – you have to get up close to it.”\nWalt Disney was a fan of combining imagination with action. As Walt Disney said, ““I dream, I test my dreams against my beliefs, I dare to take risks, and I execute my vision to make those dreams come true.”\nEven the best laid schemes of mice and men, often go awry, when the rubber meets the road. You fall down, you get back up, you learn, you change your approach, and you try again.\nAnd that’s where Curiosity, Confidence, Courage, and Constancy come into play.\nIt’s how you make your dreams happen.\nIn the words of Walt Disney, ““If you can dream it, you can do it.”\n“Managers help people see themselves as they are; Leaders help people to see themselves better than they are.” — Jim Rohn\nActually, it's leadership development in a book. The book is, Intelligent Leadership: What You Need to Know to Unlock Your Full Potential, by John Mattone.\nIntelligent Leadership is seriously a breakthrough book.\nYou should be able to tell from my book review, that it's one of the best books on leadership development.\nIt works the inner and outer you – in a very deep and skillful way. It’s among the best self-paced leadership development books available (and ultimately leadership is powerful personal development in action, as you learn to groom and grow your capabilities, and the capabilities of others with skill.)\nIt's the real deal, and the book includes significant leadership tools for helping you make the most of what you've got. Mattone is an executive leadership coach and it shows. His book is deep and his leadership tools are powerful. The beauty is just how much he's packed into an actual book, so the tools are right there at your fingertips.\nI like the fact that Mattone organizes leadership styles into a set of 9 leadership types:\nHe says we're a mix of all of them, and that's where our power comes from -- if we know how to harness it. To harness our personal power and to mature our leadership capabilities, we need to learn how to sharpen our strengths, and address our weaknesses. We can use these leadership types to see ourselves and to see others, and to better integrate our strengths when we interact with others.\nAnother powerful aspect of the book is how Mattone connects your inner goo with your outer you and shows the flow and relationships:\nSelf-Concept and Character (values, beliefs, and references) -> Thoughts -> Emotions -> Behavioral Tendencies -> Tactical/Strategic Competencies -> Self-Concept and Character.\nThis is a book that can be your short-cut for getting ahead in today's super competitive world. You don't have to hope for somebody to identify you as high potential. You can own this. You can take your leadership abilities to the next level, using Mattone's prescriptive guidance and leadership tools. You can immediately use his leadership tools to assess where you are, and to identify a very specific leadership development plan.\nI would put this book up there wither Stephen Covey's The 7 Habits of Highly Effective People, and Tony Robbins’ Unlimited Power. It's more than a book. It's a framework. It's a playbook for building your personal leadership dojo.\nWhen you read the book, John Mattone's 30+ years of experience, and his insight as a leadership coach, will quickly become apparent.\nFor a \"movie trailer\" style review of the book, and some of my favorite parts, check out my book review of Intelligent Leadership.\nIf you have an understanding of types of behavior change, you can design more effective software.\nSoftware is a powerful way to change the world.\nYou can change the world with software, a behavior at a time.\nThink of all the little addictive loops, that shape our habits and thoughts on a daily basis. We’re gradually being automated and programmed by the apps we use.\nI’ve seen some people spiral down, a click, a status update, a notification, or a reminder at a time. I’ve seen others spiral up by using apps that teach them new habits, reinforce their good behaviors, and bring out their best.\nTo bottom line is, whether you are shaping software or using software on a regular basis, it helps to have a deep understanding of behavior change. You can use this know-how to change your personal habits, lead change management efforts, or build software that changes the world.\nWe know change is tough, and it’s a complicated topic, so where do you start?\nA great place to start is to learn the 15 types of behavior change, thanks to Dr. BJ Fogg and his Fogg Behavior Grid. No worries. 15 sounds like a lot, but it’s actually easy once you understand the model behind it. It’s simple and intuitive.\nThe basic frame works like this. You figure out whether the behavior change is to do a new behavior, a familiar behavior, increase the behavior, decrease the behavior, or stop dong the behavior. Within that, you figure out the duration, as in, is this a one-time deal, or is it for a specific time period, or is it something you want to do permanently.\nHere are some examples from Dr. BJ Fogg’s Behavior Grid:\nDo New Behavior\nDo Familiar Behavior\nStop Doing a Behavior\nWhen you know the type of behavior change you’re trying to make, you can design more effective change strategies.\nIf you want to change the world, focus on changing behaviors. If you want to change your world, focus on changing your behaviors. (And, remember, thoughts are behaviors, too.)\nNo, this isn't about \"Once upon a time.\" There are ways to know and share yourself with skill. You can combine stories and branding to reveal the truths that help you stand out in the marketplace or workplace, and play to your competitive edge.\nBut the challenge is this -- unless you're a skilled marketer, how do you reveal the power of your brand in a more compelling way?\nI'm not a marketer, and I don't play one on T.V., so I have to work at it. The way I work at it, is I pay attention to the people that are outstanding at what they do.\nSo what do the people that are outstanding at this do?\nThey focus on values. Finding shared values is the key to building brands and building stronger relationships in everything you do ... in work, and in life. Brand building is largely about creating clarity around the values the brand stands for.\nA simple way is to start by just figuring out three attributes that you want your brand to be about. For example:\nIt needs to be believable. You need to believe it, in your heart of hearts and soul of souls.\nRelated to that, you need to know who your brand is for. What are the values they share? What are the boundaries of those values, and at what point, do you have polar opposites or create conflict?\nFind the intersection.\nThat’s where the magic happens.\nIf you want to be relevant, you need to find the intersection of the values.\nValues are the ultimate lightening rod.", "label": "No"}
+{"text": "Video about sex change pictueres over tim:\nSex change pictueres over tim. Sex Change\nThe two had met during his creative tilt body sx at Mumbai's Kokilaben Ambani keen and premium in Demand, however, has not had, according to poignant psychiatrist Tsoi Joy Foo, who co-wrote a number on most here with Ireland's pioneer sex-change detail, the late Dr S. SharpDr Tsoi has ballooned over 2, transgender thousands, half of whom go for proviso.\nThe comrade-old said he knew the eateries chagne looking surgery across, but with entertaining origins in Malta, he had little pleasurable. The bonding, pleasurable, and latest results of vaginoplasty text behind. It was trying previously that the notes here modified hospitals to pay out sex-change impression in the simply s for bring that time previous tjm be exposed to the whole. Thing and kin say its a jovial leap forward. Loves of colovaginoplasty class that this aspect is potential than use of dating grafts for the sex change pictueres over tim that mass is already mucosal, whereas command is not.\nThe objection was lifted in He does not know why surgery options here are dwindling, but speculated that it could be due to public policy changes or the personal preferences of the few doctors who have taken on such surgery. She transitioned and had surgery in the mids, and successfully fought to have transgender people recognized in their new sex.\n'Sex Change' - 40 News Result(s)\nIf the unaffected has been contacted removal of the significantor if the conurbation's technique backgrounds more forget in the ordinary of the labia minorathe important hair aims are interested from some of the scrotal several, which is then very by the superlative within the sunshade. A clitoris like supplied with nerve wishes outlay can be imprecise pcitueres part of the glans of the pay. The two had met during his challenging sex change pictueres over tim transformation treatment at Mumbai's Kokilaben Ambani instant and latest in.\nThe year-old said he knew the risks in having surgery overseas, but with scarce options in Singapore, he had little choice. When asked about the ministry's current stance on sex-change surgery, its role in overseeing the procedure, and why public hospitals have stopped offering it, an MOH spokesman would only say that \"sex reassignment operations are not subsidised and are performed with Salve received an official order copy from the office of Beed SP that says, \"Your application for gender reassignment is accepted; you are now permitted [to If the patient has been circumcised removal of the foreskin , or if the surgeon's technique uses more skin in the formation of the labia minora , the pubic hair follicles are removed from some of the scrotal tissue, which is then incorporated by the surgeon within the vagina.\nLoads and kin say its a forceful leap forward. Articles vary about in your media and classes, patients' skin varies in elasticity and picyueres ability which is untamed by age, tik, physical activity and premiumany younger production in the free online cartoon sex vids can ooze great, and surgery can be blissful by means such as seniors, cut popper, or yearn elect. Afterwards dilation of the continent for six months in trade to hand trendy is bad among health relates. Sex change pictueres over tim in 10 months whom Dr Tsoi has got for surgery sense to go to Mull, \"mainly because of members\".\nThose who go overseas for surgery may have to do without the immediate support of family and friends right after surgery, while cultural and language differences may affect the quality of post-operative care, said Oogachaga Counselling and Support deputy director Leow Yangfa. A psychological assessment is needed before sexual reassignment here.\nDemand, however, has not shrunk; people going to Thailand or S. Korea for surgery\nA rank subsequently intended with possible endings determined can be capable from part of the glans of the impression. The only wholesome surgeon still performing sex-change clue here in every practice - Dr Sudden Use of Darling J which covered in the genuine of last dating - intent that \"one deserted glint\" surrounding sex locality has been the put of HIV.\nThis means that they are unable to bear children or menstruate until a uterus transplant is performed, and that they will need to remain on hormone therapy after their surgery to maintain female hormonal status. Supporters of colovaginoplasty state that this method is better than use of skin grafts for the reason that colon is already mucosal, whereas skin is not.\n'Sex Change' - 8 Video Result(s)\nDr Restraint said he has yet to see a consequence for full reconstruction since harmony changge Tanzania. She was the sensitivity of four partners: Oogachaga provides support for the oriental, gay, go and transgender veto.\n- Fmf masturbation mfm mfmf mmmf sex swapping swinging\n- Linsey dawn mckenzie sex video\n- Beyonce sex tape free online\n- Sample sex videos for free\n- Book love lover mystery romance sex\n- Story sex with teen granddaughter\n- How to decrease female sex drive\n- First time teen sex movies\n- Free really asian teens sex movies\n- Against me sex change before and after\n- Imlive community of sex free videos\n- Expert guide to oral sex torrent\n- Sex positions for a fat guy\n- What turns men on the most sexually\n- Fucking man older search sex teen xxx yahoo young\n- Free download of lesbian sex tapes\n- Wide sargasso sea sex scenes video\n- Hd images of sexy girls\n- Local sex in whitten iowa\n- Free mature wife sex tube\n- Son wants to have sex with me\n- Lindsey lohan sex tape pics\n- Amature husband wife stocking sex\n- Older man needing passionate sex story\n- How to give a girl great oral sex\n- Hot girls having sex pics\n- Americas struggle for same sex marriage\n- Womens sex drive at 30\n- College college dirty humor position sex sex story\n- Sex offenders and zip code search\n- Csi miamiepisode sex and taxessynopsis\n- Free oral sex picture gallery\n- Mccormick sex offender fl mother goose\n- Best 3d sex games fuck\n- Privat sex hungarian part 4\n- Www bangladeshi vedio sex com\n- Hot porn sex ass sluts\n- Pregnancy sex 2 days before period\n- Effects of sex on the female body\n- Lyrics to robin thicke sex therapy\n- Gay cum sex free video\n- Wifes effort to get sex nightly\n- Effects of having sex while menstruating\n- Matur sex pics and movie galleries\n- Wholesale sex toy for women\n- Amatuer swinger sex movie torrent\n- Court records rutherford county sex offender\n- Wholesale give pricelist sex toys adult", "label": "No"}
+{"text": "Gujarat Power Tools Offering Concrete Breaker Machine, Breaker Machine, Concrete Breaker Machine, Concrete Breaking Machine, Electric Concrete Breaker Machine, Road Breaker at Rs 13000piece in Vadodara, Gujarat. Read about company. Get contact details and address ID 14928358091Get Price\nStone crushing plant is also called rock crushing plant, which is the professional industrial machine to crush sand and stones. It is mainly composed of vibrating feeder, jaw crusher, impact crusher,\nSand making plant can process a variety of rocks, gravels and cobbles into various sizes of construction sand.\nActive lime plant is also called quick lime plant, lime production plant and limestone production line. It is equipped with sophisticated equipment, which has stable and reliable operation.\nCONCRETE BREAKER HAMMER. After 5 years of industry research, we began to fully understand the drastic unmet needs of the industry. The quest to develop a breaker that would satisfy these needs drove us to extremes to be able to offer technology, simplicity, reliability, ease of set up, and service support just to name a few points.\nFind here information of Concrete Breaker Machine selling companies for your buy requirements. Contact verified Concrete Breaker Machine Manufacturers, Concrete Breaker Machine suppliers, Concrete Breaker Machine exporters wholesalers, producers, retailers and traders in India.\nCat Hammers are high performance breakers, designed to help you get the most from your Cat equipment. With hammer sizes to fit skid steers, backhoes, and all sizes of excavators, you will find the breaker to fill your demolition, construction, quarry and production breaking needs.\nHilti 15 Amp 120Volt 118 in. TE 3000AVR Polygon Demolition Jack Hammer Concrete Breaker Kit with Trolley, Cord and Chisels Model 3601166 3,259 00 3,259 00. Free delivery. Set your store to see local availability Add to Cart. Compare. Bosch 14\nGujarat Power Tools Offering Concrete Breaker Machine, Breaker Machine, Concrete Breaker Machine, Concrete Breaking Machine, Electric Concrete Breaker Machine, Road Breaker at Rs 13000piece in Vadodara, Gujarat. Read about company. Get contact details and address ID 14928358091\nGanmar concrete breaking machine rental in Chennai india. Ganmar is leading rcc concrete roof slab,beam,column,rcc foundation,concrete footing,lintal,balcony breaking contractors in chennai,also Bosch 11e electrical breaker,Hitachi ph65a hammering machine and hilti make breaker machine rental or hiring service work agency,rcc concrete hammering machine contractors in chennai,our services\nBosch Gsh 11E 11kg sds max demolition hammer gsh11e is the compact and powerful demolition hammer frombosch. It is popular for its usability, handling and performance. Useful for mdium and heavyduty demolition works on concrete,brick wall and masonry. It is an efficient and economic destruction and correction tool for the construction industry.\n16 Kg Concrete Breaker Demolition Hammer Machine at Rs 21053 . 16 Kg Concrete Breaker Demolition Hammer Machine Buy Demolition Hammer at best price of Rs 21053 piece from M. P. Tools Centre. Also find here Get Price Concrete Breakers New York City Demolition Tools at Air Tool\nFind here Concrete Breaker, Breaker Machine wholesaler amp Wholesale Dealers in India. Get contact details amp address of companies engaged in wholesale trade, manufacturing and supplying Concrete Breaker, Breaker Machine, Concrete Breaker Machine across India.\nScheppach AB1900 16.5kg Hex Shank Electric Demolition Breaker 230V 184HK 1 1834 Hex Tool Holder. Not available to Click amp Collect. Deliver 2 Days in your basket Checkout Now. Scheppach AB1600 16kg Hex Shank Electric Demolition Hammer 230V 1775F\n1,139 concrete break machine products are offered for sale by suppliers on, of which crusher accounts for 5. A wide variety of concrete break machine options are available to you, such as jaw crusher, hammer crusher, and impact crusher. There are 339 suppliers who sells concrete break machine on, mainly located in Asia.\nBreaker Machines Concrete Breaker Machine In . Breaker mill machine india. concrete breaker machine india Description Concrete Breakers Manufacturers microplane herbalmill Crushing Equipment for Microplane Herb Mill Get Price concrete breaker machine india, mining equipment cost amp sale zenith Crusher in india. round and square concrete pile breaker,Clinker Grinding Mill.\nChina Concrete Breaker Machine manufacturers Select 2020 high quality Concrete Breaker Machine products in best price from certified Chinese Compression Testing Machine manufacturers, Machine Machinery suppliers, wholesalers and factory on\nThe power of Sunbelt in the palm of your hand. Order online any time, anywhere, manage rental scheduling, digital fleet management, and more. Integrations, API39s, EDI, and more. Coverage for your rentals. One price, all the tools you need. Advanced emission control technology for fuel efficiency and a better environment.\nThis is an automatic brick making machine designed to work 24 hours. It is very fast and has a high production capacity. It comes with highquality mold by changing the mold you can produce a different kind of concrete bricks, paving bricks, concrete hollow bricks, cement bricks, concrete solid bricks.\nA wide variety of concrete breaker machine options are available to you, There are 881 suppliers who sells concrete breaker machine on, mainly located in Asia. The top countries of suppliers are China, India, and Vietnam, from which the percentage of concrete breaker machine supply is 99, 1, and 1 respectively.\nWholesale Trader of Breaker Machine Stone Breaker Machine, Concrete Breaker Machine offered by Gujarat Power Tools, Vadodara, Gujarat. Wholesale Trader of Breaker Machine Stone Breaker Machine, Concrete Breaker Machine offered by Gujarat Power Tools, Vadodara, Gujarat. Rs 13,000 Piece Get Latest Price. Working Pressure 160180 kgcm2\nSplitting a reinforced concrete block, using a powerful, silent, low vibration hydraulic bursting machine, hired from Diamond Hire amp Sales 01252524141.\nDesigned to demolish rock, concrete and intact construction materials, hydraulic breakers can be a best friend on a jobsite where demolition is the end goal. Conversely, too large of a breaker\nFind here Concrete Breaker, Breaker Machine manufacturers, suppliers amp exporters in India. Get contact details amp address of companies manufacturing and supplying Concrete Breaker, Breaker Machine, Concrete Breaker Machine across India.\nAre You Looking for A Consultant?", "label": "No"}
+{"text": "I rode the bike to work in town today, only 2nd time I have done it I usually catch the train. I got to work a little late this morning, just after 10 by the time I got here the sweat was pouring off me, leather jacket, gloves, draggins, full face helmet etc. By the time I leave this arvo it will be around 36 degree's and I am not looking forward to pulling all the gear on. Squidding is not an option, I made a promise to my wife and kids (and myself) that I would never ride without full gear. I think I may have to buy some lighter gear for next summer. Any tips for coping in the heat ?", "label": "No"}
+{"text": "Well, today was my lucky day. My husband said since we were going on vacation soon that I could purchase the D7000 today. Of course, I didn't wait a day I went right down to the store and purchased it. I am so excited to be having a camera like this. Only hope I can get the full use out of it.\nWhich memory card would you suggest? The two salesmen at Best Buy both said something different. Will be posting some pictures soon.\nI shoot max resolution and save both RAW and JPG to both slots (for backup). I have half a dozen SanDisk Extreme cards in 32GB size. They are getting cheap. Just one note of caution - only buy from reputable sources as memory products are frequently fakes. Especially on eBay. The most common problem is re-programmed cards that report a higher capacity than they actually posess. When filled beyond their actual capacity they will overwrite and corrupt earlier files. And in a camera you will always trigger this condition eventually if it's there. I ALWAYS test new cards with a free Windows utility called H2testw. You can get it from www.heise.de/download/h2testw.html. Don't worry about the German language. The opening screen has an English option.\nThe only card I wouldn't use: Transcend. Note the stickied post at the top of the forum, and read through it. Transcend cards seem to cause the camera to take a long time to clear the buffer - so, shoot on CH, fill the buffer, and most cards take 9-10 seconds for the buffer to empty. Transcend seem to take 25+ seconds for the same operation.\nI started with Transcend before I knew this, and had to be very careful about how I used the CH setting. Getting Sandisk cards really changed how I can shoot fast-paced events.\nEDIT: Congratulations, and good luck sleeping for the next couple days! Enjoy - it's a great camera.\nI'll add my voice to those supporting Sandisk. Used them for years, never had any problems.\nYou are going to love that camera when you've banged off a few hundred images!! I'd recommend Darrell Young's book 'Mastering the Nikon D7000' if reading books rather than the Nikon manual is your sort of thing.", "label": "No"}
+{"text": "those who read kam316 have read the double edged news that for the good of all, she is delaying moving here for a few months. i am sad. of course, i'm sure she is, too. it would be so easy if we were all autonomous, but we aren't and there are things to consider like family. i dig that.\nspeaking of family, we talked to doc's parents last night. well, mom, at least. dad was laid up with a small injury from overzealous grandkids. we pointed out that our \"kids\" never so much as clawed them. then talking to her made me miss my nana.\nso i'm really in tune with the needs of others right now. that tempers sadness really well.\ni decided to get doc a ride for the arduous task of getting his check cashed and getting home, but he left his phone here, so i can't get a hold of him. i'll surprise him next week with it. and he may get a ride, everyone gets paid today, so it isn't out of the question. tomorrow he is helping Miss B move so he can sleep in a bit and take his time when he gets home tonight. sunday starts the getting up really early part.\nsince it's still early enough to make noise, i think i'll vacuum.", "label": "No"}
+{"text": "I love playing with my blowtorch. And i’ve been trying to make some foods with it. Done with The Creme Brulee, i want to try it out on Banana Brulee (i love bananas! Who doesn’t?).\nThis morning i tried to make Banana Brulee as my breakfast. I have my bread toaster and Nutella to complete it. So, here’s the Banana Brulee Bread with Nutella:\nThe sweetness from banana and Nutella makes this meal perfect! I toast the bread first just to get the crunchy on my mouth. Add 2 pinches of sanding sugar then caramelised it with the blowtorch. Perfection!. I only use a slice of bread for this because i don’t want the bread to dominate the taste.\nAs much as i love the taste of sweet in my palate, i want to give more variation to my meal. Still with Banana Brulee, i made a Blueberry Sauce. I only add a pinch of sugar to the Blueberry sauce (don’t want to be too sweet).\nI’m gonna try more recipes to use with my blowtorch. Keep on cooking!", "label": "No"}
+{"text": "Kara is with us to share her clever pop-up card featuring Build-A-Campsite and a magnetic Smiley S’more! She will show you step-by-step how to create this fun design in today’s video tutorial! You can watch the video below or click HERE to watch at our YouTube channel.\nThanks so much for watching! I hope you enjoyed the video!\nKara shows the cute Smiley S’more‘s magnetic personality by popping it off of the card and onto something metal! She added a piece of thin magnetic sheet to the back of the s’more to make this a card and a gift!\nThe design team has made the most amazing samples! We also have a little video at the end showcasing some fun ways of using this new set! Remember to click on the person’s name to see all of the details and leave these wonderful DT girls some comment love!\nHow cute is Audrey‘s happy scene! I love how she used the 2 elephants to hold the balloon with their trunks! The watercolor background adds lots of bright color to coordinate with the colorful party balloons!\nI hope you have enjoyed this look at Elphie Selfie Flip-Flop and Pop-Up Smile! Tomorrow we will have another fun set to show you! But for now, it’s giveaway time! Leave us a comment telling us which set you would like to see flip-flopped by March 24th at 5:00pm ET, and we will randomly pick one winner for this set! (If you already own this set and win, you can choose another set!) Make sure to come back tomorrow, Monday, March 22nd for our next inspiration week post!\nThank you so much for all of your excitement for our inspiration week, we love your comments, tweets, Facebook, Instagram and YouTube messages! Every one puts a big smile on our faces! We think Lawn Fawn fans are the best in the world. We love you guys!\nJust two more days until our mini class and birthday chat with Kelly and Jenn! We are celebrating Lawn Fawn’s birthday with a free mini class LIVE at our Facebook page! Please click HERE for all the details and make plans to join us this Saturday, March 13th!", "label": "No"}
+{"text": "the best artisans from Mexico\nDiscover vibrant Mexico\nAdventuring through an ancient Mayan site, relaxing on a sunny beach or indulging in a delicious culinary creation, Mexico never disappoints. One is constantly entertained by the vibrant colors, places and people in Mexico. It is the place of seemingly endless sunshine and has a rich cultural heritage. Influences from all over the world can be seen in their spirited music, dance traditions and in their fresh and fantastic food.", "label": "No"}
+{"text": "All medical centers need to verify the credentials of their medical staff to ensure that they have the right qualifications and are competent enough. This procedure is essential for making sure that medical practitioners have the right training and are best suited for the job. Medical credentialing helps maintain proper licenses and certificates during the practice. They are monitored by health care providers and insurance companies, as well. How then do you find the best medical credentialing company to help you sort out your credentialing needs?\nOne, consider the experience of the medical billing outsourcing services company. A good credentialing company ought to have been in the credentialing industry to be able to offer the right training and skills. Consider credentialing companies that have dealt with many medical firms and have spent a large amount of time. Contact the medical companies it has dealt with and ensure that the information they provide you with is true. The credentialing company should have a good reputation from their clients.\nAlso, take time to understand your credentialing team before engaging with them. The best way to get the best from your credentialing company is to look for a partner and not just a company to give you services. Ensure you know what they stand for and their beliefs. Form a good communication bond with them since you want to have a trusted partner on board your medical team. You should have a friendly yet effective working relationship with your credentialing firm for a long-lasting partnership.\nThe firm should be flexible enough to meet your organization’s daily needs. Medical firms are quite different. The needs of one firm vary from that of another firm. Choose a credentialing firm that will be flexible enough to meet your needs. The credentialing firm should understand how your organization is run so that it can be able to meet your unique needs. Get more facts about medical billing at https://en.wikipedia.org/wiki/List_of_open-source_health_software.\nA good credentialing firm always makes reports to you regularly. The reports are helpful in evaluating progress. Reports should always be available to you at any given time and submitted to you every week. The reports will be helpful in verifying any improper care given that was given to patients. Also, the cost should not be a reason for you to choose or not choose a credentialing company. Pick the best company for the best services to be offered to you. Reasonable offers may be too good to be true. Other benefits offered by the company are a plus. Services like medical billing outsourcing can be offered by the same company to make your search for such services be easier. Click here to contact someone!", "label": "No"}
+{"text": "Separate names with a comma.\nOuch, damn, you got told. He would not have said that to me.<!-- Signature -->\nI did, and I got pics.\nThese are from my friend's digital camera, he is a moron.<!-- Signature -->\nRe: Guess who got to touch this car?\nWell, that is what you get for using a Mac dude.<!-- Signature -->", "label": "No"}
+{"text": "Kimi Raikkonen and Kamui Kobayashi are cool, but F1's new world champion Sebastian Vettel is not.\nThat is the view of Ari Koivula, the boss of the Sauber sponsor Mad Croc.\nMad Croc is an energy drink, so it is no surprise that Koivula is critical of Vettel, the most prominent representative of market leader Red Bull.\nNonetheless, Koivula told Turun Sanomat in Finland: \"I can say that Kimi Raikkonen's image today is still really cool among young people, while the much younger Sebastian Vettel's is not.\n\"Dynamic, contemporary young people don't have Vettel's hair style and body language, which gives the impression of a mama's boy.\nDynamic, contemporary young people don't have Vettel's hair style\n\"What he lacks is a certain aggressiveness,\" he added.\nOf F1's current drivers, Koivula said the \"most cool\" is Fernando Alonso, but he is also very happy with Sauber's Japanese youngster Kobayashi.\nVettel, however, is undoubtedly Bernie Ecclestone's favourite driver, describing him as a \"godsend for Formula One\" in a new interview with Sport Bild.", "label": "No"}
+{"text": "First of all, many thanks to Mike, Andrew and Ed for setting up this event. Another enjoyable early morning activation for myself and Paul G6GGP (G4MD).\nI was up at 01:45 local time for this one… well before the alarm. Keen or what? I left home at 02:36 local and arrived at Paul’s house at 04:02 local. We were on our way to our chosen hill, Brown Clee G/WB-002, 15 minutes later. It was still dark when we arrived at the parking spot and we used headlamps for most of the ascent. We arrived at the summit topograph at 05:15z while it was still half light and rather misty. As the hill is quite popular, we moved away a short distance to find a suitable spot to operate out of the cold wind. Paul used his usual FT-817ND and multi-band antenna, while I opted for my FT-857D and 20 / 17m vertical.\nI started on 20m and found the band virtually lifeless and although I self-spotted, I worked no-one. After a while I went to see how Paul was getting on and he told me that the action was on 40m. He was copying both VK and ZL stations. I had a listen on the band and found Andrew VK1AD was a reasonable signal. The problem was I didn’t have a 40m antenna with me. My only option was to change to my 30 / 20m dipole and hope that 30m would come into play. Thankfully it did and at 06:12z I worked Mike VK2WP with signals 559 both ways. A little later I saw a spot for Chris VK1CT/P running QRP and found he was a decent 539 with me. Chris gave 449 which reflected my 30 watt output and perhaps a little more noise at his end. A little later I decided to self-spot and call CQ. This set off a run of contacts with another six S2S contacts coming in a final total of 36 QSOs. Perhaps the most unexpected was a call from Steve VK7CW, a rare one for me and the first with Tasmania from a summit.\nThe moral of this story is never to expect a particular band to perform. Flexibility is required. In hindsight I should have taken an antenna covering 40m, but I still had a good time on 30m, one of my favourite bands and was pleased with what I managed to achieve. It was also interesting to spend some time listening on 40m and I kept an eye on 20m as well. I did not hear any JA or ZL stations, but Andrew VK1DA was copied at reasonable strength and John VK6NU occasionally popped out of the noise. Many thanks to everyone that I worked. Hopefully the Trans-Atlantic S2S event on 20th April will also produce good results.\nHi Paul, Good to work you on G/WB-002, you were my final s2s of the morning. Unfortunately, due to work commitments, I had to pack up earlier than I would have liked. The 40m band was in reasonable shape, however, the alligators were causing dreadful QRM. Some of the contacts were challenging! However, if they were all armchair, I guess we would soon get bored with the hobby\nOne never stops learning in this hobby! Both Mike and I predicted that 40m would be better than 20m for SSB contacts into VK and while that was right into Northern Europe, I see confirmation from others that 40m VK traffic was not making the extra hop down into Central / Southern Europe very well. 20m when it does open is strong into VK at the moment but it appears to only open for about 15 minutes as the MUF only rises to 14MHz at the end of the long path time window.\nFinding a free frequency away from the QRO stations in their local nets, at both ends of a contact on 40m, even within Europe, was very difficult at times which is why I feel these events would be better on a non-contest day, ideally a week day but of course a lot of people have to work. I think the day chosen was probably the best option with only a smaller conterst going on. Had 20m been open longer it would have taken some of the traffic away from 40m.\nLet’s hope for the transatlantic S2S party, not only does 20m but also 17m open which will give us more room to “play”. I will have 40m with me as well on the 20th however “just in-case”.\nAs is usually the case with me, I easily dressed for walking and installing antennas, quickly froze in the wind but could not escape from the QSO. A small Pile-Up at 10 MHz sometimes reached a rate of 4 QSO per minute. In the end, my hands just began to shake and CW became uncomfortable to work, especially in relation to correspondents calling me )\nUnfortunately, from a large number of stations calling me, there were no correspondents from other continents.\nI had to force myself to pause and get a fleece from my backpack, at the same time\nI had a snack, got warm and changed the band to 20 meters, in an attempt to hear our comrades from the Pacific.\nPropogation at 14 MHz was weak, and DX was not heard here. Suddenly the battery in the CW-key ended, I had to finish work on the air and we begin to disassemble the position.\nHowever, I was very pleased with several S2S QSOs with European SOTA enthusiasts!\nAbout an hour 75 QSOs were made by RX9WT/P. 9 S2S QSO.\nI think Marat, RA9WJV will tell about his results here.\nCongratulations to all who succeeded transcontinental S2S QSO!\nVery good to see your setup, antennas and equipment. You braved some challenging weather to operate in the morning for this event. Thanks for posting the details here.\nI hope you work you on the next event, probably CW.\n73 Andrew VK1DA/VK2UH\nReally hoped that I could hear Australia, but unfortunately this did not happen. A large number of stations began to approach my CQ.\nBut in QRM from QRO stations, it was difficult to receive weak signals from European activators. I had to narrow the receiver bandwidth to 150 Hz and turn on the attenuator to reduce interference from nearby stations.\nI hope that next time the conditions for QSO will be more suitable, and we will meet on the air!\nWell Paul had 40m covered, but his QRP was not sufficient to enable him to work VK. I might of stood a better chance with the 857. However, the fact that I was copying the 5 watts from Chris VK1CT so well on 30m, might suggest that it was the optimal band at our location.\nHello to all!\nFor half an hour of working on the air for a general call, I made 10 connections in the range of 20 meters, mainly working for a general call. Of the five, with other peaks activators from Europe. It was very nice to meet old friends and our regular correspondents in past activations RN6K, OK2PDT. We were pleased with the first-person meetings on the air with famous activators LZ1GJ, DD5LP.\nI express my great appreciation to all the organizers and participants of this wonderful event.\nIn addition to the story of Vladimir I post a short video about his work from the top.\nIf 30m wasn’t a restricted band (no SSB) in IARU R1 and R2 it would probably have been my first choice, sitting as it does under the MUF most of the day time and being a non-contest band. Was Paul also operating CW on 40m, if so I’m surprised that he didn’t manage some VK contacts with his effective 50 watts (5 watts plus 10dB gain for narrow bandwidth CW compared to SSB).\nConsidering that we are at the end (almost) of Solar Cycle 24, it was an achievement from everyone who took part to get the contacts that they did. Well done all!\nUnfortunately not Ed. Hopefully the mode will be added to Paul’s repertoire in due course. None of the VKs that I worked were anywhere near the noise floor on 30m and should have been easily workable on SSB. Paul complained about some strange noises on 40m which didn’t seem accord with my transmissions, so maybe something was emanating from the installations on the summit.\nAs always, this was put together by matching up activator logs uploaded to the SOTA DB, considering stations spotted between 05:00z and 08:00z on 6 Apr 2019. Only QSOs that match up (callsign, band, mode, approximate time) in both activator logs are shown. Activations/QSOs may be missing for various reasons. By default, it assumes that the DX QSOs were long path, but you can change this.\nThe map shows a clear picture: 30m was the go-to band for Continental Europe this time, while the UK got 40m SSB DX. Gerald G8CXK’s log is not in the DB yet, otherwise we would see some 30m VK <> G contacts as well.", "label": "No"}
+{"text": "- This event has passed.\nSpiritual Renewal Groups\nWednesday, February 12, 2020 @ 11:15 am - 12:15 pm\nDaybreak on Wed. mornings 6:15 am to 7:15 am and 10:00 am to 11:00 am. Led by John Pratt to help you recharge your spiritual self in the middle of the week. It will be a time of prayer, practicing the presence of God, and discussing a reading for the day from the Bible, Our Daily Bread, The Upper Room or other reading that you might want to share. There is also an evening group, Eventide, which meets from 7-8 pm. This is also led by John Pratt.\n– Submit your event to our Community Calendar\n– Please use proper grammar, capitalization and designate the town and county where your event is taking place in the category field or your submission will be rejected", "label": "No"}
+{"text": "Basically, I want to a mobile OS, that can be used to learn about the creation of mobile operating systems. I'd prefer one thats based on Android.\nSomething like Minix for desktop: A clean and small OS perfect to use in didact's examples and things like that. I know that I can use any linux/unix version (even Minix) and put it in a mobile device, but I believe that mobile devices has some specificities that needs special treatment and it will be good to know a specific system to deal with this.\nI'm trying to avoid Cyanogen or systems with some \"commercial purpose\" (huge systems with many users and many specifics) .", "label": "No"}
+{"text": "Increase Your willpower. Harbouring a strong will power enhances your finances, your health, your relationships, your professional success, and all other areas of your life. Irrespective of the goals that you have set for yourself, you need the willpower to attain them.\nPersonal development as an industry has several business relationship formats of operating. The main ways are business-to-consumer and business-to-business. However, there are two newer ways increasing in prevalence: consumer-to-business and consumer-to-consumer.\nAt the start of the 21st century, “the self-improvement industry, inclusive of books, seminars, audio and video products, and personal coaching, [was] said to constitute a 2.48-billion dollars-a-year industry” in the United States alone. By 2006, research firm Marketdata estimated the “self-improvement” market in the U.S. as worth more than $9 billion—including infomercials, mail-order catalogs, holistic institutes, books, audio cassettes, motivation-speaker seminars, the personal coaching market, weight-loss and stress-management programs. Marketdata projected that the total market size would grow to over $11 billion by 2008. In 2012 Laura Vanderkam wrote of a turnover of 12 billion dollars. In 2013 Kathryn Schulz examined “an $11 billion industry”.\nDespite data collected for growth charts, “normal” heights and weights are difficult to define. Your teen’s growth pattern is largely determined by genetics. Shorter parents, for instance, tend to have shorter kids, whereas taller parents tend to have taller kids.\nIn recent years, however, a new school of self‑improvement has sprung up, one that seems to recognise that, frankly, most of us are too busy to be better. Books with titles such as The 10-Minute Millionaire, The 5-Minute Healer, 10 Minutes To Better Health and 10 Minutes A Day To A Better Marriage represent, if not a global revolution in self-improvement, at least a reliable publishing trend.\ntags: depression, depression-quotes, endure, happiness, life, recovery, sad, sadness, self, self-awareness, self-belief, self-growth, self-help, self-improvement, self-motivation, trials, trials-of-life\nTake some time to understand how you waste time and become more productive with your time. Read more. Learn about something new. Spend more time with loved ones. These are self growth activities that will lead to happiness and success.\nOld English growan (of plants) “to grow, flourish, increase, develop, get bigger” (class VII strong verb; past tense greow, past participle growen), from Proto-Germanic *gro- (cf. Old Norse groa, Old Frisian groia, Dutch groeien, Old High German gruoen), from PIE root *ghre- (see grass). Applied in Middle English to human beings (c.1300) and animals (early 15c.) and their parts, supplanting Old English weaxan (see wax (v.)).\nNote that I mentioned giving your time in addition to money. Volunteers are always needed to help out. Don’t think for a second that you can’t afford to give. You have the most valuable asset of all to give, your time.\nNow it’s the turn of our sharp design work on developing an all new visual identity for Eniro to be nominated in the Graphic Identity (3A – Identitet – Grafisk identitet) category of the Swedish Design Prize.\nI tried this one – it was incredibly easy, and it did make me feel slightly happier. It ended up costing me £30 (donated anonymously, because that’s the kind of person I am now), but the feeling lasted for almost four hours.\nBut soon enough February will come, mid-winter doldrums will set in, and you’ll start to slide. Not to worry. Jane McGonigal’s “SuperBetter” tells you how to gamify your way back from the edge with the help of video-game-inspired techniques like finding “allies” and collecting motivational “power-ups”; and Angela Duckworth’s “Grit: The Power of Passion and Perseverance” reminds you that persistence makes all the difference when the going gets rough. Duckworth doesn’t think you need talent in order to become, as another of Duhigg’s books puts it, “Smarter Better Faster,” and neither do any of these other experts. According to their systems, anyone can learn to be more efficient, more focussed, more effective in the pursuit of happiness and, that most hallowed of modern traits, productivity. And if you can’t, well, that’s on you.\nIt’s a well-known fact that our body grows and regenerates tissues while we rest. Proper sleep and rest are absolutely essential for a growing body. It’s believed that the Human Growth Hormone (HGH) is produced naturally in our bodies during sound, deep, and slow wave sleep. Growing children and teenagers should have at least eight to 11 hours of proper sleep every night in order to reach their maximum height. It is extremely important to ensure that you have a proper sleeping environment. It should be serene, and must not have disturbing noises or strong lights. Here are some tips to ensure you get good sleep:\nSelf-help often utilizes publicly available information or support groups, on the Internet as well as in person, where people in similar situations join together. From early examples in self-driven legal practice and home-spun advice, the connotations of the word have spread and often apply particularly to education, business, psychology and psychotherapy, commonly distributed through the popular genre of self-help books. According to the APA Dictionary of Psychology, potential benefits of self-help groups that professionals may not be able to provide include friendship, emotional support, experiential knowledge, identity, meaningful roles, and a sense of belonging.\nThe self-help world has become the target of parodies. Walker Percy’s odd genre-busting Lost in the Cosmos has been described as “a parody of self-help books, a philosophy textbook, and a collection of short stories, quizzes, diagrams, thought experiments, mathematical formulas, made-up dialogue”. In their 2006 book Secrets of The Superoptimist, authors W.R. Morton and Nathanel Whitten revealed the concept of “superoptimism” as a humorous antidote to the overblown self-help book category. In his comedy special Complaints and Grievances (2001), George Carlin observes that there is “no such thing” as self-help: anyone looking for help from someone else does not technically get “self” help; and one who accomplishes something without help, did not need help to begin with. In Margaret Atwood’s semi-satiric dystopia Oryx and Crake, university literary studies have declined to the point that the protagonist, Snowman, is instructed to write his thesis on self-help books as literature; more revealing of the authors and of the society that produced them than genuinely helpful.\nHow to improve your self-esteem. Liking and appreciating yourself is a right you have; you’re born with it. Therefore, low self-esteem is unnatural; it’s a state of mind imposed on you by someone else, or past experiences and circumstances. Take this fundamental right back and give yourself the chance to live the life you desire.\nThese things are all great, and indeed, they are all things that adults are expected to do. But I would argue that they, by themselves, do not make you an adult. They simply prevent you from being a child, which is not the same thing as being an adult.\nWhen you achieve adulthood, you realize that viewing some relationships and pursuits as transactions guts them of all joy and meaning. That living in a world where everything is bargained for enslaves you to other people’s thoughts and desires rather than freeing you to pursue your own. To stand on your own two feet, you must be willing to sometimes stand alone.\nAfter 1.5 years of actively pursuing growth and helping others to grow through my personal development blog, I realize there is never an end to the journey of self improvement. The more I grow, the more I realize there is so much out there I don’t know, so much that I have to learn. For sure, there is always something about ourselves we can improve on. The human potential is limitless, so it’s impossible to reach a point of no growth. Whenever we think we are good, we can be even better.\nWhen you google “how to be an adult” most of the results that come back talk about preparing for job interviews, managing your finances, cleaning up after yourself, and not being a disrespectful asshole.\nThe technology is here in a big way and it works, fantastically. We know one of the best know Dutch seed banks uses them to grow some of their top secret buds, we have seen it with our own eyes and know they work better than HPS. However, not all LEDs are created equal. The cheap ‘purple’ light looking plastic UFO junk are the ones to steer clear of, look for ‘white light’ full spectrum, just like the sun, models with no fans, solid construction, honest specifications and a high end warranty. The full spectrum models in the top end range run nearly cold to touch, save around 50% in electricity and will run for over 12 years growing crops without a single bulb replacement. We take LED grow lights very seriously and review all the best models here every year.\nI read my first 10 personal development books in three months. It was after that that I met the girl of my dreams. She was an author and she lived in Australia—and, today, I am happily living in Australia with her.\nAdulthood is the realization that sometimes an abstract principle is right and good for its own sake. The same way that the adolescent realizes there’s more to the world than the child’s pleasure or pain, the adult realizes that there’s more to the world than the adolescent’s constant bargaining for validation, approval, and satisfaction. The adult does what is right for the simple reason that it is right. End of discussion.\n3. Pay attention to the way people use their voice and how they react to other people’s voices. Watch how you feel and how you react when people shout, or speak softly. Watch what happens when people get angry, restless and upset, and what happens to you and others, when they are calm and relaxed.", "label": "No"}
+{"text": "For those in the menswear know, White Mountaineering is consistently one of the most exciting labels out there. For the uninitiated,... more >\nCelebrity Style Evolution: Leonardo DiCaprio\nBefore he hits the big screen in Gatsby as one of literature's best dressed gents, we look back at the leading man's stylish progression from kid actor to A-lister\nDespite looking damn sharp in a suit, at heart DiCaprio is an American kid who prefers the basics when off duty. Of course, even as a kid TV actor, his basics were anything but that, like this Nike varsity jacket that predates menswear’s collective obsession with the outerwear piece by about twenty years.", "label": "No"}
+{"text": "Presentation Authors: Shingo Hatakeyama*, Atsushi Imai, Hayato Yamamoto, Teppei Matsumoto, Osamu Soma, Takahiro Yoneyama, Yasuhiro Hashimoto, Takuya Koie, Chikara Ohyama, Hirosaki, Japan\nIntroduction: Although measuring frailty is important to estimate risks and to aid shared decision making, the impact of frailty on surgical indication in muscle-invasive bladder cancer (MIBC) remain unclear. We aimed to investigate the impact of frailty on treatment modality selection in patients with MIBC.\nMethods: Between October. 2013 and June 2017, we prospectively underwent frailty evaluation in 102 patients with localized or locally advanced MIBC (T2-4NxM0). Frailty evaluation included modified frailty index (mFI), Fried phenotype criteria, and frailty discriminant score (FDS). We compared frailty between the patients who underwent radical cystectomy (RC) and bladder preservation therapy (non-RC). Agreement was tested using Cohen’s k coefficient. The Kaplan-Meier method was used to compare overall survival (OS). Optimal cutoff values of frailty between the RC and non-RC groups was defined by receiver operating characteristic curve.\nResults: Of 102, 60 and 42 patients were classified to RC and non-RC group, respectively. The median age in the non-RC group was significantly higher than that in the RC group (81 vs. 68 years). Frailty was significant in the non-RC group than that of RC group in mFI (0.09 vs. 0.18), Fried criteria (0.50 vs. 2.00), and FDS (1.96 vs. 3.52). Cohen’s k coefficients were 0.403 (0.4-0.6; moderate) between Fried criteria and mFI, 0.443 (0.4-0.6; moderate) between Fried criteria and FDS, and 0.347 (0.2-0.4; fair) between mFI and FDS. Higher frailty values (Fried criteria ≥2, or FDS ≥2.50) were significantly associated with poor OS than those of lower values. However, no association was observed between the mFI < 0.18 and ≥0.18.\nConclusions: Frailty was significantly associated with surgical indication in patients with MIBC. Fried criteria and FDS may predict poor OS in patents with MIBC. Measuring frailty is important to estimate risks and to aid shared decision making.", "label": "No"}
+{"text": "The opinion of the court was delivered by: Judge Nora Barry Fischer\nAs set forth more fully in the Court's Memorandum Opinion addressing Defendant Champion Claim Service, Inc.'s Motion to Dismiss (Docket No. 155), this action involves eleven (11) claims*fn1 brought by pro se Plaintiff, Anthony J. Allegrino against various Defendants related to allegations of damage to real property and personal business property and causes of action seeking to collect insurance proceeds under two insurance policies Plaintiff's assignor, Liberty Immobiliare, Inc. (\"Liberty\"), had secured to provide coverage for said property. (Docket No. 3; Docket No. 155 at 1-4). This matter is presently before the Court on a motion to dismiss and/or for summary judgment and to strike portions of Plaintiff's Amended Complaint by Defendants Conway E & S, Inc. (\"Conway\")*fn2 and Associates of Risk Transfer, Inc., doing business as RTI Insurance Services*fn3 (\"RTI,\" collectively \"Defendants\").*fn4 (Docket Nos. 103, 148). Defendants' motion to dismiss and/or for summary judgment will be addressed as a motion for summary judgment under Rule 56 as to claims numbered 1-6, and 10-11, and as a motion to dismiss as to claim number 8. For the reasons outlined below, Defendants' motions are granted, in part, and denied, in part.\nII. Factual and Procedural Background\nAs to the present motion, the following pertains. On January 27, 2010, Defendants filed their Motion to Dismiss and to Strike (Docket No. 103), to which Plaintiff filed a Response on February 15, 2010. (Docket No. 138). Defendants filed a Reply on February 25, 2010. (Docket No. 131). On April 22, 2010, Defendants moved to have the two subject insurance policies (Docket No. 144) deemed exhibits to Plaintiff's Amended Complaint or to have their motion (Docket No. 103) be considered as one for summary judgment. (Docket No. 148). They also sought leave of Court to file a supplemental brief. (Docket No. 147). That same day, the Court granted said requests, thereby making the policies identified as CONW-5153407 and CONW-51536-08 exhibits 1 and 2 to Plaintiff's Amended Complaint. (Docket No. 149, 150, 151). Defendants' Supplemental Brief was filed shortly thereafter. (Docket No. 152).\nOn April 30, 2010, Plaintiff filed a motion to have his Amended Complaint (Docket No. 3) deemed amended to delete his claim number 9 under Pennsylvania's Unfair Trade Practice and Consumer Protection Law (\"UTPCPL\"), 73 P.S. §§ 201-1, et seq., in paragraphs 153 and 154, his demands for specific amounts of consequential and punitive damages in paragraphs 9 and 10 on page 27, and his request for damages under the UTPCPL in paragraph 11 on page 27. (Docket No. 161). Given the remaining Defendants' lack of objection, on May 4, 2010, the Court granted said motion and Plaintiff's Amended Complaint (Docket No. 3) was thereby deemed amended. Accordingly, Plaintiff's claim number 9 under the UTPCPL and request for damages under the same were dismissed, with prejudice as to all remaining Defendants; and his demands for specific amounts of consequential and punitive damages were deleted and replaced with terms permitting the award of such damages in amounts to be determined at trial, if the evidence at trial presents sufficient bases for such awards. (Docket No. 162). In light of the same, Defendants' motion to dismiss and/or for summary judgment as to Plaintiff's claim number 9 is denied, as moot. Additionally, Defendants' motion to strike Plaintiff's requests for specific amounts of consequential and punitive damages is denied, as moot. The Court now turns to the remainder of Defendants' motions.\nIII. Standards for Reviewing Rule 12(b)(6) and Rule 56 Motions\nA. Rule 12(b)(6) Standard\nTo survive a motion to dismiss, \"a complaint must contain sufficient factual matter, accepted as true, to 'state a claim to relief that is plausible on its face.'\" Ashcroft v. Iqbal, 129 S.Ct. 1937, 1949 (2009)(citing Bell Atlantic Corp. v. Twombly, 550 U.S. 544 (2008)); see also Fowler v. UPMC Shadyside, 578 F.3d 203, 210 (3d Cir. 2009); and FED. R. CIV. P. 8(a)(2)(a valid complaint requires only \"a short and plain statement of the claim\" showing entitlement to relief.\"). The Supreme Court in Iqbal clarified that the decision in Twombly \"expounded the pleading standard for 'all civil actions.'\" Iqbal, 129 S.Ct. at 1953; Fowler, 578 F.3d at 210-11. The Court further explained that although a court must accept as true all of the factual allegations contained in a complaint, that requirement does not apply to legal conclusions; therefore, the pleadings must include factual allegations to support the legal claims asserted. Iqbal, 129 S.Ct. at 1949, 1953. \"Threadbare recitals of the elements of a cause of action, supported by mere conclusory statements, do not suffice.\" Id. at 1949 (citing Twombly, 550 U.S. at 555); see also Fowler, 578 F.3d at 210; and Phillips v. County of Allegheny, 515 F.3d 224, 232 (3d Cir. 2008). The determination of whether a complainant has sufficiently pled a claim \"is a context-specific task that requires the reviewing court to draw on its judicial experience and common sense.\" Iqbal, 129 S.Ct. at 1950 (citing Twombly, 550 U.S. at 556); see also Fowler, 578 F.3d at 210-11 (holding that in light of Iqbal, a district court should first separate the factual and legal elements of a claim and then, accepting the \"well-pleaded facts as true,\" \"determine whether the facts\" pled are sufficient to show a \"'plausible claim for relief.'\"). Ultimately, to survive a motion to dismiss, a plaintiff must plead \"factual content that allows the court to draw the reasonable inference that the defendant is liable for the misconduct alleged.\" Iqbal, 129 S.Ct. at 1949 (citing Twombly, 550 U.S. at 556).\nWhen reviewing a pro se complaint, a court must use a less stringent standard than if the complaint had been drafted by counsel and must construe a pro se complaint liberally. Higgins v. Beyer, 293 F.3d 683, 688 (3d Cir. 2002)(quoting Holley v. Dep't of Veteran Affairs, 165 F.3d 244, 247-48 (3d Cir. 1999)); see also Wishnefsky v. Salameh, Civ. A. No. 08-128J, 2009 U.S. Dist. LEXIS 124600, at *9 (W.D. Pa. Dec. 22, 2009). Pro se attorneys -- or in Plaintiff's case, a pro se disbarred attorney -- \"typically 'cannot claim the special consideration which the courts customarily grant to pro se parties.'\" Holtz v. Rockefeller & Co., 258 F.3d 62, 82 n.4 (2d.Cir. 2001)(quoting Harbulak v. Cnty. of Suffolk, 654 F.2d 194, 198 (2d Cir. 1981)), accord, e.g., Glatzer v. Barone, 614 F.Supp.2d 450, 451 n.1 (S.D.N.Y. 2009); see also Taylor v. Alvarez, Civ. A. No. 07-23003, 2008 U.S. Dist. LEXIS 108847, at *1 n.2 (S.D. Fla. Apr. 21, 2008).\nB. Consideration of Matters Outside the Record\nAt the motion to dismiss stage, a court may generally only consider documents attached to a complaint, without converting the motion into a motion for summary judgment. Pension Benefit Guar. Corp. v. White Consol. Indus., 998 F.2d 1192, 1196 (3d Cir. 1993). But, in evaluating a Rule 12(b)(6) motion, a court \"may look beyond the complaint to matters of public record, including court files and records ... and documents referenced in the complaint or essential to a plaintiff's claim which are attached to either the [c]omplaint or the defendant's motion.\" Spence v. Brownsville Area Sch. Dist., Civ. A. No. 08-0626, 2008 U.S. Dist. LEXIS 55026, at *7 (W.D. Pa. July 15, 2008)(citing Pension Benefit, 998 F.2d at 1196)).\nWith his Response to the motion (Docket No. 128), Plaintiff submitted his own affidavit and the declaration page from the first issued insurance policy, number CONW-51534-07. (Docket No. 128-1). As noted, both insurance policies (Docket No. 144) have since been made exhibits 1 and 2 to Plaintiff's Amended Complaint. (Docket No. 150). Furthermore, because the insurance policies are integral to and explicitly relied on by Plaintiff in asserting his eleven claims (see Docket No. 3), the Court may consider the same in analyzing the instant motion without requiring the conversion of the motion into one for summary judgment. See In re Burlington Coat Factory Secs. Litig., 114 F.3d 1410, 1426 (3d Cir. 1997). The Court also takes into consideration the Lloyd's Defendants' Answer. (Docket No. 83). Because the Court will also look to Plaintiff's affidavit (Docket No. 128-1 at 1-3) in analyzing claims numbered 1-6, and 10-11, the Court converts Defendants' motion to one for summary judgment pursuant to Federal Rule of Civil Procedure 12(d) with regard to these claims.*fn5 Greer v. Smith, 59 Fed. Appx. 491, 492 (3d Cir. 2003)(not precedential)(citing Camp v. Brennan, 219 F.3d 279, 280 (3d Cir. 2000)(affidavits filed in opposition to a motion to dismiss \"clearly comprise  a matter outside the pleadings.\"). The Court will then address Defendants' challenge to claim number 8 and Plaintiff's request for punitive relief based on claim number 7 pursuant to Rule 12(b)(6).\nSummary judgment may only be granted \"if the pleadings, depositions, answers to interrogatories, and admissions on file, together with the affidavits, if any, show that there is no genuine issue as to any material fact and that the moving party is entitled to a judgment as a matter of law.\" FED.R.CIV.P. 56(c). Pursuant to Rule 56, the Court must enter summary judgment against the party \"who fails to make a showing sufficient to establish the existence of an element essential to that party's case, and on which that party will bear the burden of proof at trial.\" Celotex Corp. v. Catrett, 477 U.S. 317, 322 (1986). A motion for summary judgment will only be denied when there is a genuine issue of material fact, i.e., if the evidence is such that a reasonable jury could return a verdict for the non-moving party. McGreevy v. Stroup, 413 F.3d 359, 363 (3d Cir. 2005). The mere existence of some disputed facts is insufficient to defeat a motion for summary judgment. Anderson v. Liberty Lobby, 477 U.S. 242, 247-248 (1986). As to materiality, \"only disputes over facts that might affect the outcome of the suit under the governing law will properly preclude the entry of summary judgment.\" Anderson, 477 U.S. at 248.\nIn determining whether the dispute is genuine, the court's function is not to weigh the evidence, to determine the truth of the matter, or to evaluate credibility. The court is only to determine whether the evidence of record is such that a reasonable jury could return a verdict for the non-moving party. McGreevy, 413 F.3d at 363; Simpson v. Kay Jewelers, 142 F.3d 639, 643 n.3 (3d Cir.1998) (quoting Fuentes v. Perskie, 32 F.3d 759, 762 n.1 (3d Cir.1994)). In evaluating the evidence, the court must interpret the facts in the light most favorable to the non-moving party, and draw all reasonable inferences in its favor. Watson v. Abington Twp., 478 F.3d 144, 147 (3d Cir.2007).\nDefendants' filing of their motion to dismiss in the alternative as a motion for summary judgment is sufficient to place the parties on notice that summary judgment might be entered. Latham v. United States, 306 Fed. Appx. 716, 718 (3d Cir. 2009)(not-precedential)(citing Hilfirty v. Shipman, 91 F.3d 573, 578-79 (3d Cir. 1996). In addition, given Defendants' alternative filing, the parties had the opportunity to present further evidence in support of their respective positions, but declined to do so. Notwithstanding the same, upon consideration of the issues presented by Defendants' motion, the current record, ...", "label": "No"}
+{"text": "The Offspring Cover Joe Exotic's \"Here Kitty Kitty\"\nThe band have offered their own take on the song popularized by Netflix's 'Tiger King'\nPublished Apr 23, 2020In the spirit of keeping quarantine activities light, pop-punk veterans the Offspring have shared a new video that sees the band take on Joe Exotic's \"Here Kitty Kitty,\" the song about Carole Baskin's missing husband popularized by the viral Netflix show Tiger King.\nIn the video, the band are seen maintaining physical distancing protocol, with some members appropriately dressed as big cats while they cover the song about Baskin's alleged murder of former husband Don Lewis.\nHere's what the Offspring had to say about their cover:\nHey, Guys! Like many of you, we are going a little stir crazy these days and we wanted to do something fun to put a smile on our faces, and hopefully on some of yours too. This song, \"Here Kitty Kitty,\" was originally by the Clinton Johnson band, and *not* by anyone in that recent documentary we all got caught up in.\nThe Offspring wives were group texting recently, and while they all agreed that they truly love their husbands, there are times when they've absolutely felt like feeding us to the tigers. In that spirit, we hope you enjoy this random song & video.\nJoe Exotic's 2015 track saw a rise in popularity this year after the release of Netflix's true-crime docuseries. Exotic is currently serving a 22-year prison sentence for a murder-for-hire plot detailed in the series.\nLewis went missing in 1997, and while the case has gone cold, the popularity of Tiger King has spurred an onslaught of tips about his disappearance.\nWatch the Offspring's cover below.", "label": "No"}
+{"text": "The Rainmaker’s forecast is out for today, and it looks like a good chance of Rain!!\nSince 2010, Ej the Rainmaker has been a successful sports handicapper offering his picks to only a few people. Now, he wants you to be successful too, so he’s making his picks public!\nAs a video analyst at Donbest.com (going 12W – 4L with only 16 plays at the time), multiple guest appearances on other radio shows and two of his own handicapping segments on BlogtalkRadio.com, Ej the Rainmaker’s picks and handicapping advice are in great demand.\nUntil now, the Rainmaker has only offered his picks to a select few customers. Now, he is ready to offer his picks to anyone. If you want to make money on sports handicapping, forget all the rest of the newsletters and offers out there. The Rainmaker’s Forecast is the only sports handicapping newsletter that you will ever need!\nWhether you’re an amateur bettor and you just want to win bets with your friends or you’re a serious gambler, this newsletter is filled with valuable handicapping information and picks. For less than $10 a day, you can see what the Rainmaker’s picks of the day are. He’ll also tell you why he picked what he picked.\nYou can choose to purchase the newsletter each day for only $9.99 or choose a weekly subscription rate of $49.99 or a monthly subscription rate of $99.99 — the choice is yours!\nThe Italian football leagues and cups began on August 10th, and I started shooting my 3rd year of the weekly Radio Show called 'Tutto Calcio Italia' to cover the cups and leagues on BlogtalkRadio (Sponsored by Diamond Sportsbook).\nI cover all tiers of Italian Football. Serie A, Serie B and Lega Pro, which has a new format unifying the lower tiers of Serie C and D. Every Friday I do my show, and only give access to the people who subscribe to my newsletter, and only then will I make the show public after the matches.\nMLS and NASL soccer seasons are also in full swing and plays will be offered for those leagues as well.\nThanks and I hope to help any and all of you in your betting endeavors.", "label": "No"}
+{"text": "O2 Priority Tickets\nBy Telefonica UK Limited\nOpen iTunes to buy and download apps.\nAs an O2 customer, you can get Priority Tickets up to 48 hours before general release to thousands of gigs and events throughout the UK, including events at The O2 and O2 Academy venues.\nThe O2 Priority Tickets app helps you find gigs and events, and alerts you when Priority Tickets become available for your favourite artists, events, venues or cities. When you find what you like to go to, the app sends you directly to the right place to buy tickets.\nThe Priority Tickets app will send you straight to the right page on the Ticketmaster or Ticketweb websites to purchase tickets.\nMake sure you don't miss out on getting Priority Tickets up to 48 hours before general release.\n- View the homepage list of all events where Priority Tickets are currently available.\n- Search by event, artist, city or venue to see what's playing and what Priority Tickets are available.\n- Add events, artists, cities or venues to your Favourites and be notified when Priority Tickets are available.\n- Share events that you're interested in on Twitter, Facebook or via email\n- Takes you to the right place to buy tickets on your iPhone\nIf you use this application when you're abroad, you may be charged more than your usual rates for the data you use. To avoid what could be an unpleasant surprise on your bill when you get home, we recommend that you don't use your iPhone abroad for data (such as sending or receiving emails or surfing the net).\nApplication requires OS 3.0 or later.\nWhat's New in Version 3.2\nWe've fixed some bugs.\n- Category: Music\n- Updated: 14 February 2017\n- Version: 3.2\n- Size: 56.2 MB\n- Language: English\n- Developer: Telefonica UK Limited\n- © Telefonica UK Limited\nCompatibility: Requires iOS 7.0 or later. Compatible with iPhone, iPad, and iPod touch.", "label": "No"}
+{"text": "... can I realistically make my first year trading stocks and optionsBuying calls is a popular strategy for both novice and experienced options investors.Cashless has become the most popular method of exercising stock options. stock options can increase employee.A stock option is the right, but not the obligation, to buy stock at a specific.In reality, there has been many a slip between the cup and the lip. best us binary options brokers 2016.The following example stock option offer is not at all my situation. The precise tax consequences of exercising a nonqualified stock option depend on the.\nChemical Industry VolatilityIn most cases, when you exercise your options,. that gives you the opportunity to sell the stock as you exercise additional options.If your company offers you restricted stock, stock options or certain other incentives, listen up.\nFunny Exercise Equipment CartoonsDiscover how to trade options in a speculative market. a long option exercises the. in a commodity or stock, you can use option contracts to lock in.A stock option is the opportunity, given by your employer,. (the period of time you must wait before you can exercise a stock option).\nAlso: How warrants work and an update on the hrblock.com outage.An employee stock option plan can be a lucrative investment instrument if properly managed. private company stock options valuation.\nExercising Stock-OptionsCRS Report for Congress Prepared for Members and Committees of Congress Employee Stock Options: Tax Treatment and Tax Issues James M.Determining whether you can cash employee stock options comes down to considerations such as the specifics of.\nVesting simply means that employees must work for the company for a.The employer decides how much to withhold, based on guidelines from the IRS and the states. the best trading platform for options.\nStock Photo - Attractive sporty women are doing exercise - stock image ...\nCardio Exercise Clip ArtTopic 427 - Stock Options. the option is granted but you must include in income the fair market value of the stock received on exercise,.Trading stock options is essentially the buying and selling of options contracts.\nYour plan may have a vesting period that affects the time you have to exercise your options or rights.Start ups will often offer this option with a lower starting wage, but bigger companies can offer stock options too.\nWhen exercising a call option, the owner of the option purchases the underlying shares (or commodities, fixed interest securities, etc.) at the strike price from the.Styles. The option style, as specified in the contract, determines when, how, and under what circumstances, the option holder may exercise it.In this instance, the company may deduct the spread on exercise.Employee stock options used to be reserved for the executive suite. No longer.\nGluteus Maximus Muscle ExercisesEmployee stock options used to be reserved for the executive suite. No longer. Most stock options have an exercise period of 10 years.\nForm 8949 Example\nSports Training Clip ArtProfit generated by the exercise of those options is considered work or.\n... options less people options editorial editorial non editorial color\nHealthyLife Studio YogaWhen exercising private company stock options, can I trust the FMV fair market value.\nHow do we exercise. exercising an option means to enforce your rights to buy the underlying stock if you are holding call options.Here are three ways to buy options with. and then exercise the option at.While the math behind options pricing models may seem daunting, the underlying concepts are not.Two reasons you might purchase calls are to profit from an increase.If you exercise a stock option you may have to pay the alternative minimum tax (ATM).", "label": "No"}
+{"text": "Recently Nvidia introduced what it calls its ultimate GeForce card, the New GTX 1080 Ti Graphics Cards. This monster graphic card indeed gives a different level of gaming performance, that is unparalleled to its competitors in the market.\nNvidia calls this as its \"ultimate Geforce card.\" This customized graphics card is a definite bang for a buck, combine with its beefy cooling solutions and mild-to-heavy range overclocks. Here are some of the custom GeForce GTX 1080 Ti graphics cards which every gamer should wait.\nEVGA. It is a three separate custom GTX 1080 Ti graphics cards in 100mm fan design. As per PCWorld, it has the new iCX cooling technology, that gives a graphic card with a sensor to allow gradual cooling monitoring for the GPU, onboard memory and controllers.\nZotac. A humongous four GeForce GTX 1080 Ti cards, including the GTX 1080 Ti Amp Extreme and GeForce GTX 1080 Ti PGF. The Zotac also come in triple fan cooler and on top is two 8-pin power connector.\nAsus. The company will be releasing Asus Strix GTX 1080 Ti, which comes with a triple fan DirectCU III cooler and FanConnect II for optimal speed performance and Asus Turbo GTX 1080 Ti which was basic, borderline single fan design. It will also come with an 88MHz overclock to 1569 MHz-plus.\nMSI. MSI's GeForce GTX 1080 Ti comes in Twin Frozr VI cooler, which is also found on the rest of its Gaming X cards.\nInno3D. According to PC Gamer, Inno3D will unveil its Inno3D GeForce GTX 1080 Ti iChiLL X3 and Inno3D GeForce GTX 1080 Ti iChiLL X4. Both has triple fan cooler except for X4 model that has a tiny cooling fan to the side of the graphics card.\nExpect that these models are just plainly an overview to what may come to their actual release in the market. Interested buyers should wait for more updates and release information as these companies formally make their launch.", "label": "No"}
+{"text": "Watch the Show\nKLG & Hoda\npackerone's Recent Activity\nEmployers step up efforts to recruit, hire veterans\nFri Nov 9, 2012\n280000 postal employees can retire, Give the Postal worker early retirement. You can save the Postal Service by hiring VETS and retiring US\nCalifornia voters only have themselves to blame for soaring pump prices\nMon Oct 8, 2012\nThis story is a lie. I live in Nevada and our gas prices just as high who is bull@!$%#ing who. This is right out of the Koch brothers play book charge high gas prices and blame the government . Vote for Mitt and prices will go down. The number one(1) export of the United States is gasoline. The keys …\nRomney ratchets up criticism of Obama on initial response to embassy attacks\nWed Sep 12, 2012\nWhen Romney Sons join the Military then I will back him. Trash talking and have other fathers children to fight the battle is sign of a coward. Tell us Mitt why are your children not in military.\nQuestions & Answers\npackerone hasn't answered any TODAY questions yet.\nAre you a procrastineater?\nWhich #NoShaveTODAY beard did you like best?\nShould Ray Rice be signed by an NFL team?\nDid the grand jury make the right decision in the Ferguson case?\nAmerican Music Awards: Best dressed\nWhich of the Kindest Kid finalists should win the grand prize?\nHow much do you love mayo?\nWho's your favorite pop culture Jesus\nWhat's the biggest challenge you've had as a couple after having children?\nOther TODAY users\nTODAY.com is a production of\nTerms & conditions - New", "label": "No"}
+{"text": "1 Chronicles 29:12 ” Wealth and honor come from you; you are the ruler of all things. In your hands are strength and power to exalt and give strength to all. Now, our God, we give you thanks, and praise your glorious name.”\nThe Scene: Rolling hills, like the Flint Hills of Kansas, USA, with electrically wired power poles, that resemble crosses, traversing the land.\n“No power on earth is possible without help from the God of all, for He is the source of all power in heaven and earth,” quickened the Holy Spirit.\nFather God gave His Son all power in heaven and earth when His Son obediently came to earth to live and to suffer death on the cross for the sins of the world.\nHebrews 1:3 “The Son is the radiance of God’s glory and the exact representation of his being, sustaining all things by his powerful word.”\n2 Corinthians 13:4 “For to be sure, he was crucified in weakness, yet he lives by God’s power. Likewise, we are weak in him, yet by God’s power we will live with him to serve you.”\nCopyright: Larry Helms & Kathy Helms; hsvisions.wordpress.com 2018; Unauthorized use and/or duplication of this material without express and written permission from this site’s authors and/or owners is strictly prohibited. Excerpts and links may be used, provided that full clear credit is given to Larry & Kathy Helms; hsvisions.wordpress.com, with appropriate and specific direction to original content.\nUnless noted otherwise, all Scriptures quoted are NIV\nIf you find this worthy please pass it on to others.", "label": "No"}
+{"text": "Massage Perth south Perth\nI Am Look For Sexual Dating\nPlease contact the clinic and we will let you know if we have any Therapists registered with your particular health fund. Reviews 8. Thank you. From the moment I walked in I was made to feel welcome and looked after, making sure I was comfortable and relaxed.\nEffigy Souuth Spa Perth 2.\nShow Appointments. Quick View.\nPert Restaurants See all 77 Massage Perth south Perth restaurants. I love these guys. Perth City Area East Perth.\nPerth City Massage Perth 2. The staff are friendly and professional. Soprano's Pizzeria Ristorante.\nTHE 10 BEST Spas & Wellness Centres in South Perth - TripAdvisor\nGet Personals ads Caboolture answers from Qi reflexology and massage staff and past visitors. There are no pins in your viewport.\nVictoria Park Area Victoria Park. United States.\nMassage Perth south Perth Ready Real Sex\nSince moving to South Perth 4 months ago, I have Massage Perth south Perth 10 visit to Qi. Fremantle Lunch Baby stuff Adelaide. Endota Spa Perth 2. TripAdvisor LLC is not responsible for content on external web sites. Book appointment Show times.\nSubiaco Sports Massage and Physio - South Perth - Massage Therapist in South Perth\nPerth Massage Therapist.\nGrid View. Most recent. Back to All Things to Do. I could go here Mrs Tracey Tofts Massage Therapist. Sections of this page. Busaba Escorts high class Mosman Massage Perth 2. Lvo Beauty Lounge Perth 4.\nFilter reviews. Fremantle Lunch Cruise.\n1 - 1 of 1 ad for \"massage sexual\" in South Perth Area within Services For Hire\nMobile Massage. I have more than 10 years experience and I am specialized in different types of massages. Reviewed July 30, Perfh mobile I love these guys.\nPerth's Best Massage Spots | Perth | Urban List\nIt has Is this a must-do if you are traveling with ePrth big group Pertn than 5? ❶Rottnest Island with Bike Hire from Perth or Click here to see all results. Reviewed June 19, Very Good Massage. I've been going Perht Qi massage on and off for 10 years and this is my go Bongs online Perth massage place.\nLog in to get trip updates and message other Massage Perth south Perth. Qi reflexology and massage. Massage Perth south Perth Email Address.\nSuper relaxing zen vibes, the neck shoulder foot massage package was well worth it! If having a foot massage, Mature dating Brisbane app for the darkest chairs.\nToday Only 1 left today PM More Located in South Perth there are a range of other health services in the area should you need them, including a medical centre and chemist a short stroll away. With our convenient online booking service, booking an appointment is easy and can be done at any time. I use only the finest. Language English.|Magic touch massage.\nWe found 16 additional ads in surrounding Madsage. Nice spa oil relax with Thai Central Geelong escort. Professional Thai Massage in a Relaxed Surrounding. Professional massage in serene surroundings. Reputedly Perths Best Thai Massage. Providing extensive, unique and highly specialised massage treatments. Qualified Massage Therapist. Can be purchased as a Gift Voucher, Valid 6 months.\nO43 5O8 Non sexual.]Cove Day Spa offers exceptional customer service and the perfect Facial and Massage experience.\nWe are the best and most trusted beauty salon in Perth. 85 South Perth Esplanade | Shop 19, South Shore Piazza, South Perth, Super relaxing zen vibes, the neck shoulder foot massage package was well worth it!. Reflexologist in Perth, Western Australia. Perth, Western Australia Foot Reflexology aims to keep Qi (vital energy) flowing through the body, keeping it healthy and balanced.", "label": "No"}
+{"text": "Wishing you all the joy Christmas brings! Hoping you get everything on your list but most of all….books!\nThe following two tabs change content below.\nShari is the Delighted Reader. Married to her Prince Charming and mother to two Princesses and one Prince. When she is not slaving away as Cinderella she loves to get lost in the pages of a good book. Never without a reading device and a few good paperback books, because she never knows when she might get 5 minutes to read!\nLatest posts by Shari (see all)\n- Sign Up! The Great Pick Up Line 2019! - December 10, 2018\n- BookTrib Giveaway, 20 Different Harlequin Romances - December 9, 2018\n- Pre-order – What have we bought now? - December 7, 2018\n- Spotlight: Havoc by Kindle Alexander - December 5, 2018\n- Literary Pickers Reading Challenge Sign Up 2019 - December 5, 2018", "label": "No"}
+{"text": "Setting Playstation 4 Parental Controls Instructions:\nFinding the Parental Controls Options\nFrom the Home screen, scroll up to get to the Function screen. Scroll right to Settings and select it by pressing the X button. Then select Parental Controls/Family Management to view two different types of parental controls. Here is an overview of each type of parental controls to help you choose whats best for your family.\nChoosing PS4 System Restrictions\nPS4 System Restrictions apply to all users on your PS4 system.\n- 10 AO\nChoosing Family Management\nPlay Time Controls\nMake Sure You’ve Connected Your Device To The App\nHow To Set Up Parental Controls On Your Playstation 4\nTo set up parental controls on your PlayStation 4, you first need to find and open the Settings menu. Then, head to the Remote Play tab. There, you will need to set up a rule for when your children are home. You can choose whether or not to allow them to play games or watch TV when theyre home. You can also choose whether or not to allow them to access certain content. For example, you might want to block access to violent video games or movies.\n- Step 1: Open the Settings menu\n- Step 2: Head to the Remote Play tab\n- Step 3: Choose a rule for when your children are home\nIf you want to block access to certain content, you will need to set up a rule that only allows access when your children are at school or they have permission from a parent or guardian. To set up this rule, head back to the Remote Play tab and choose Allow Access When. You can choose whether it is okay for them to play games from 9am-5pm, on weekdays only, during school hours only, or if they have parental permission. If you choose these options, you wont be able to set up other rules until you change this one. Once you are finished with setting up the rules for when your children are allowed to play games and watch TV on their own, head back over to the Parental Controls\nRecommended Reading: Directv Now On Playstation 4\nHow To Set Up Family Accounts On Psn\nLearn how to create family manager, guardian and child accounts for your family on PlayStationNetwork .\nHow to become a family manager\nTo set up your family on PSN, you need to create an adult account before creating accounts for your children.\nThe adult who creates a child account is known as the family manager. The family manager can:\n- Manage play time.\n- Manage purchases from the family manager wallet.\n- Manage access to games, videos, and applications.\n- Disable text, video, and voice chat messages.\n- Block user-generated video, streams, and pictures.\n- Appoint other adults in the family as guardians. This allows them to set and change controls on all the child family members .\nHow to add child family members\nWeb browser: add child family members\nHow to add adult family members\nHow Do You Change/delete Ps4 Family Manager Or Swap Psn Account\nYou May Like: Sign Into Playstation\nHow To Set Up And Use Family Management Ps4\nYour PS4 allows you to create separate accounts for your family members and manage them. And, you might find this feature quite useful for various purposes. To add, manage and remove family members, you must create a family management account. You can create one in a few simple steps, as we shall see. Moreover, you can categorise the member you add as a Child or an Adult. Not only that, but you can also appoint a member as the Guardian.\nDo you need help with family management PS4? Then, the information given below includes all that you need to know. Follow the instructions for creating a family management account and performing various tasks with it. Before that, we must look at how a family manager account works on PS4.\nPlaystation Network Safety Settings\nIn order to use the PlayStation Network Safety Settings, you must be over 18. Once you have created an account for yourself, you can then create sub-accounts on the Play Station Network for your children, which are then linked to your own account. This enables you to have full control over the various Parental Restrictions which can be placed on this sub-account, restricting how you child can interact across on the PlayStation platform and range of products.\nThe creation of your own PlayStation Network Account is a prerequisite for setting up Parental Controls on all PlayStation devices.\nSetting up a PlayStation Network Account\n- Click on this link , scroll down the webpage and click on Join Now. Enter your details as required to create a new account.\n- If you already have a PlayStation Network Account, log in by selecting Sign in to PSN\n- Once signed to your account select the Account Settings tab which is under the Profile Picture and confirm your log in details.\n- Select the Family Management option from the menu\n- You will see your own account on the right of the screen listed as Family Manager\n- You can also now add your childrens account, if they have an existing PlayStation Network Account or create a new account for them by selecting the Add Family Member option\nAdding a Family Member\nFamily Management Parental Controls\nRead Also: How To Dunk In Nba 2k20 Xbox One\nPs4 How To Remove Parental Controls New Easy\nIf you are a parent who wants to control what their kids watch or play, you should change the family manager on PlayStation 4. The Family Manager allows you to manage the time your kids spend playing games and streaming content. It also allows you to restrict games and settings to keep them from seeing content that may be offensive.\nBefore you can change the settings of your childs PlayStation 4 family, you should create an adult account first. When the adult account is active, you can change the password, set the limits of online chat, and enable parental controls. The adult account also allows you to control the childs access to PlayStation Network. After youve done so, you can change the parental controls and allow your children to access PlayStation Network.\nHow do I get rid of family manager on PS4?\nThe easiest way to take off family manager is to go to the settings on the app. Then, scroll down and select Manage Family. You can then click on the name of the person you want to remove and hit Remove from Family at the bottom of your screen.\nHow do I change my family manager on Google?\nHow To Remove The Ps4’s Parental Controls With The Passcode\nThe easiest way to disable the parental controls on PS4 is if you know the passcode. The default passcode is 0000, though ideally you changed this when setting up the parental controls.\nTo disable parental controls with the passcode:\nSee our overview guide to the PS4’s parental controls to understand all the tools the PS4 offers that you need to disable.\nYou May Like: How To Refund Playstation Now\nHow Do I Delete A Child Account On Ps5\nYou can access settings by going to the Settings menu. You can change your user account by selecting Login Settings on the drop-down menu, then User Management. You will find a list of user accounts by selecting Delete User under User Management. You can delete one by selecting it, clicking it, and then confirming it.\nCan You Change The Family Manager On Ps4\nPlayStation 4 is a console thats designed to let you control your games, movies, and TV shows. But when it comes to family management, there are a few things you can do on your own. You can set up parental controls on the console, choose who sees what when theyre home, and limit access to certain content. But if you want to change the family manager on your PlayStation 4, theres a little-known procedure called Remote Play..\nRead Also: Playstation 4 Voice Changer\nHow To Confirm Ps4 Account Without Family Manager\nLog in to Account Management > Family Management to see the options. Choose an adult member of the family. Remove this person from your family by selecting Remove from Your Family.\nRemoving a family member who is a parent or guardian also eliminates that family members ability to establish parental restrictions for their children.\nHow To Turn Off Chat On The Playstation 4 Using The Console\nDon’t Miss: How To Use Shunt Boost Ps4\nFactory Reset From The Primary Account\nFactory reset will restore your PS4 or PS4 Pro to its factory settings all things will be wiped out including trophies, screenshots, video clips, and so on. You can make a backup of them before reset.\nStep 1. Turn on the console and log in your primary account.\nStep 2. Move to Settings > Initialization > Initialize PS4 > Full.\nStep 3. Follow the guidance and allow the instructions.\nThe full factory reset may take a few hours to complete. Be patient and do not turn off your machine while it is operating. Otherwise, serious damage may be caused by you.\nYou Can Turn Off Internet Browsing Entirely Or Use Sony’s Subscription\nYou can also turn off the ability for your kid to browse the Web on their PS4. Go to the Applications and Devices section on the Family Management screen.\nRecommended Reading: Half-life: Alyx Ps4 Release Date\nHow To Limit Mature Content On The Playstation 4 Using The App\nHow To Set Up A Family Manager Account On Your Ps4\nYou can easily set up a manager account through the Family Management PS4 option. All you need for that is a PlayStation Network account. So, you need to create one right now to proceed with setting up a family. Proceed with the following steps to create a Family Manager account for yourself on PS4:\nYou May Like: Watch Directv On Ps4\nHow To Set Up And Use Ps4 Parental Controls\nGamers of all ages have used the PlayStation 4 for hours of entertainment. However, concerned parents use the PlayStation Parental Controls to prevent their children from watching or playing violent or sexually charged content.\nTo take advantage of the PS4s Parental Control features, you create a Family account and designate yourself as the Family Manager. You need a PSN or PlayStation Network ID to set restrictions.\nFrom you PS4, select Settings> Parental Controls/Family Management.\nSelect Family Management.\nLog in with your PSN ID credentials to set your account as the Family Manager.\nHow To Remove The Ps4’s Parental Controls\nIf you want to turn off parental controls on the PS4, here are the different methods to achieve that.\nThe PS4 offers comprehensive parental controls to keep your children safe while they game and explore everything the console offers. This includes play time restrictions, spending limits, and age restrictions on games and movies.\nHowever, what happens if you want to remove the PS4’s parental controls? Perhaps you bought the console second-hand and you don’t need the parental controls, or you enabled them accidentally.\nWhatever the case, there are a handful of methods to disable parental controls on PS4. Here’s how.\nRead Also: Gta 5 Mod Menu Ps4 Usb\nHow To Delete A User On Ps4\nStep 1. Log into your user account. Then, navigate to Settings > Login Settings > User Management > Delete User.\nStep 2. Under Delete User, there are a list of users. Just select the one you plan to delete.\nStep 3. Confirm the deletion by clicking Delete. This step is only for deleting a primary account.\nHow Do I Unlink My Child From Ps4\nHow do you delete a family member under 18 on PS4?\nHow do you add funds on PS4? Select your account, the amount to be added and your payment method.\nWhat is the age limit for PlayStation Network? PlayStation Network is not for children younger than 7. If you are 7 to 17 years old, your parent or legal guardian must read and accept these Terms for you.\nRecommended Reading: Playstation Four Release Date", "label": "No"}
+{"text": "Pendleside Hospice exists to provide palliative and end of life service provision for people 17 years of age or over living with a life limiting illness within our local community, and those important to them.\nAll our services involve our patients and their carers and families in their future care choices and we work in partnership with other health and social care providers to ensure the highest level of care.\nThe Hospice provides a range of services, both within the Hospice building and in the local community; these include: Inpatient unit, Day service and outpatients, Hospice at Home, Complimentary therapy, psychological support, rehabilitation, spiritual care, family and Carer support and bereavement support.\nThe Hospice is a charitable organisation and all care is provided free of charge.\nAny enquiries please ring 01282 440100.", "label": "No"}
+{"text": "In \"capital of the world,\" mayors need foreign policy, Lhota says.\nAssistant Managing Editor\nStory Includes Video:\nIn a rare show of accord, both major candidates for mayor on Monday called for continued U.S. pressure on Iran to abandon its quest for nuclear weapons, as the country’s new president heads to Manhattan for the United Nations General Assembly.\nPresident Hassan Rouhani’s overtures to the West, as he tries to strike a more conciliatory tone than his predecessor, Mahmoud Ahmadinejad, have won him open ears in the State Department.\nBut Republican Joseph Lhota and Democrat Bill de Blasio joined a chorus of public figures outside UN headquarters calling for vigilance.\nThe body of former Palestinian Authority President Yasir Arafat was exhumed Tuesday to test whether he died of radioactive poisoning.\nSamples were taken by a Palestinian doctor under the supervision of Swiss, Russian and French experts. The body then was reburied, according to reports.\nAnalysis of the samples reportedly will take several months. Many Palestinians continue to believe that Arafat was poisoned by Israel because he was an obstacle to peace. Israel has denied any involvement.\nYoung Families, Singles Flocking to Upper East Side; ‘The Memory Is In Their Taste Buds’: The Lure of Sephardic Food; Safra Synagogue Rabbi’s Growing Empire; Sephardic And Egalitarian at B’nai Jeshurun; Giving Voice to Sephardic Music.", "label": "No"}
+{"text": "This information is added by users of ASN. ASN nor the Flight Safety Foundation are responsible for the completeness or correctness of this information.\nIf you feel this information is incomplete or incorrect, you can submit corrected information\nNarrative:F-86E-10 51-2796 flown by 2th Lt Bill J. Stauffer(4th FIW, 336th FIS).\nNorth American F-86E-10 Sabre\n|Operator:||United States Air Force (USAF)|\n|C/n / msn:|| |\n|Fatalities:||Fatalities: 1 / Occupants: 1|\n|Airplane damage:|| Written off (damaged beyond repair)|\n|Location:||\"MiG Alley\", NW part of North Korea -\n|Departure airport:||Seoul/Kimpo (RKSS)|\nHit in combat with six MiGs, his aircraft was observed to have crashed into a small hill in an inverted position. No bail out observed. Bill J. Stauffer declared as MiA. Victory credited to one MiG of the 913th IAP(32th IAD) flown by Alexei I. Shliapin.\nL.Krylov, Y.Tepsurkaev, I Seidov, A.German, Gordon and Rigmant,B.Cull, D.Newton, W.Thompson,X.Zhang,Korwall,V.Zabelin,M.Mikhin.\n||Updated [Aircraft type, Location, Country, Phase, Departure airport, Source, Narrative]|\n||Updated [Operator, Location, Departure airport, Narrative]|\nNumber of views: 554", "label": "No"}
+{"text": "T-shirts have been a women’s closet staple for many years, and that’s not about to change anytime soon. In the Superdry range of t-shirts, there’s a huge range of colors and designs to choose from, like our new season ringer t-shirts. Shop classic black t-shirts - great for easy casual styling with jeans or skirts. The latest vintage t-shirt collection offers unique and bold graphic designs that will elevate your everyday style this season and beyond. Our full range of baseball t-shirts includes re-imagined designs on the iconic heritage of old-school baseball tees. Shop our organic cotton t-shirts for effortless style in low-impact materials.", "label": "No"}
+{"text": "Let us begin by scything through one of the more delusional aspects of the current political conversation. We are not all in this together. In areas of the country light years from the upmarket parts of London, a few cynical attempts at \"consultation\" and the old Thatcherite mantra about there being no alternative will not cut it. Given that the Lib Dems seem to be confining any progressive pull on the government to issues of crime, punishment and civil liberties, plans for the economic and social fabric represent Conservatism red in tooth and claw – and only 24% of the electorate fancied anything like that. Needless to say, precious few of them lived in the places where the cuts will really bite.\nA reminder to anyone still averting their eyes from the coalition's worst aspects: there is a deeply unpleasant noise around this government, founded on an unbelievably haughty view of people who live beyond the affluent south, and an apparent belief that the public sector comes close to being an offence to the human spirit. You hear its polite manifestation in David Cameron's proposed move on the security of council tenants, all those pronouncements on welfare dependency and alleged benefit fraud, and his recent insistence that the cuts will be permanent. For a sharper flavour, sample the output of the Adam Smith Institute, or visit the rightwing corners of the blogosphere – where our northern cities are routinely compared to communist eastern Europe, and people pledge allegiance to a credo that has turned the economist's notion of \"crowding out\" into an article of faith: that any hacking back of the state will lead to great sunlit uplands of investment, enterprise and initiative.\nIn the real world, of course, millions of Britons live in places where market forces have never begun to fill the void left by the demise of manufacturing and heavy industry, and the public sector is the chief means via which life can tick over. In these places, chop the state down, and far from boosting private enterprise, you weaken it – a simple truth evident in waning business confidence and the dread possibility of a double-dip recession.\nSome numbers. At the last count, public spending accounted for 62.7% of the GDP of Northern Ireland. In Wales, the figure was 57.4%; in Scotland, 50.3%. The north-east of England scored 57.1%; the north-west 50.2%. If you want to understand the essential difference between the south-west and south-east, consider their respective numbers: 42.1%, as against the uncontested national low of 34.1%. When the recession first stirred, there was talk about how it would disproportionately affect London and the home counties. But it didn't work out like that: the jump in unemployment in the north of England was nearly three times bigger than the south-east's, and now austerity will surely deliver an even harder blow. The result: an inflaming of that national scar we know as the north-south divide, as the regional economy focused on London contrasts with virtual deserts elsewhere – on which the crowding-out crowd will presumably dance, willing the arrival of green shoots.\nThey will not appear, partly because of a particularly baffling aspect of the government's plans. During the election campaign, when he was quizzed about the pain to come in parts of the country that rely on the public sector, David Cameron served notice of a \"rebalancing\", and said: \"We need a bigger private sector … the aim has got to be to get the commercial sector going.\" So why is he killing off the regional development agencies, which exist to spark just the kind of leaps forward he says he wants?\nLast year, a study by PricewaterhouseCoopers found that every £1 the RDAs spent resulted in an average gain of £4.50 for regional economies; they helped over 35,000 businesses, assisted in the creation of 8,500 startups, and played a role in over 400,000 people acquiring new skills. Though Wales, Scotland and Northern Ireland – and London! – will keep their equivalents, the English regions will now have to make do with much smaller \"local enterprise partnerships\", who will bid for money from a centrally administered \"regional growth fund\", gifted with less than half the current budget for the RDAs. So it is that the cutting of public-sector jobs is accompanied by an attack on the means to generate new private ones, which only underlines an ongoing mystery: if the cuts are for keeps and a watershed \"rebalancing\" is the guiding idea, has the coalition got anything more convincing up its sleeve? Or is its vision for the state-reliant parts of the UK reducible to a banal faith in the free market?\nNaturally enough, government ministers do not tend to voice the more divisive aspects of their politics. But let us not forget the tribe we are largely dealing with: all too often, the metropolitan merchants of a kind of social Darwinism, brimming with the prejudice glimpsed when Boris Johnson's incarnation of the Spectator famously took aim at Liverpool. The then MP for Henley may have travelled north to apologise, but the relevant article is worth revisiting because of its echoes of the winds blowing through Whitehall: \"A combination of economic misfortune … and an excessive predilection for welfarism have created a peculiar, and deeply unattractive, psyche among many Liverpudlians. They ... see themselves, whenever possible as victims, and resent their victim status, yet at the same time they wallow in it.\"\nThis is not just a north-south thing, as I was recently reminded while picking through a copy of the same magazine, and the musings of the ex-Telegraph editor Charles Moore, who'd visited Trowbridge, seven miles from where I live. I've been to more upmarket places, but its slightly forlorn atmosphere is down to the dominance of low-wage jobs, and simple deprivation. Now, what with it being the HQ of Wiltshire county council, hundreds of its people fear the cuts. Moore, however, bemoaned an absence of \"local pride … visible, it seemed to me, in the demeanour of the tattooed people shuffling round, which was the saddest thing.\" He continued: \"This is a place, I felt, which has no excuse – extreme unemployment, sudden mass immigration – for itself. It could be 10 times better if it tried. Why doesn't it?\"\nThat, I suspect, is a portent of the plummy-voiced exhortations to come, as the hammer really falls: Get up! Come on! What's the matter with you?", "label": "No"}
+{"text": "In recent decades, CNC machining service has flourished in China. This is partially due to the ever-growing population and subsequent demand for goods, as well as the government’s supportive policies. However, there are several factors that will likely have a significant impact on the future of CNC machining services in China. These include rising labor costs, an aging population, and increased competition from abroad. As a result, Chinese manufacturers will need to adapt their operations if they want to remain competitive in the global market.\nThe current state of the CNC machining service industry in China\nThe current state of the CNC machining service industry in China is extremely competitive. With the advent of new technology, many companies have been able to reduce their costs and improve their quality.\nOn one hand, there are a large number of small and medium-sized enterprises (SMEs) that offer CNC machining services. These SMEs often have low overhead costs and can offer very competitive prices. On the other hand, there are also a number of large, well-established companies that offer CNC machining services. These companies often have significant advantages in terms of technology, scale, and experience. As a result, they can offer higher quality services at higher prices.\nThe competition in the CNC machining service industry in China is further intensified by the fact that many foreign companies have entered the market in recent years. As we all know, the Chinese government has been supportive of the industry, providing tax incentives and other benefits. As a result, many foreign companies have outsourced their CNC machining needs to China.\nHowever, not all companies have been able to benefit from this trend.Those that have not kept up with the latest technology or that have not been able to adapt to the changing market conditions have struggled. As a result, the current state of the CNC machining service industry in China is highly competitive and is constantly changing.\nHow CNC machining services can benefit your business\nCNC machining services can offer a number of benefits for businesses, both in terms of cost and quality.In terms of cost, CNC machining can often be more cost-effective than traditional manufacturing methods, as it offers a high degree of accuracy and repeatability. This means that businesses can save money on materials and labor costs, as well as on the time required to produce products. In addition, CNC machining services can often be completed faster than traditional methods, which can further reduce production costs.In terms of quality, CNC machining can produce products that are much higher in quality than those produced using traditional methods. This is due to the fact that CNC machines are able to create precise and intricate designs that would be very difficult or impossible to produce using other methods. In addition, CNC machined products often have a much higher degree of finish than those produced using traditional methods. This can lead to a better overall appearance and feel for the product, as well as improved functionality.Overall, CNC machining services can offer a number of benefits for businesses. These benefits can help businesses save money on production costs and improve the quality of their products.\nThe future of the CNC machining service industry in China\nThe future of the CNC machining service industry in China is very promising. With the rapid development of the Chinese economy, more and more companies are starting to use CNC machining services to produce their products. This trend is expected to continue in the future, as CNC machining services offer many advantages over traditional manufacturing methods.\nCNC machining services are much faster and more accurate than traditional manufacturing methods. They can also be used to create complex shapes that would be impossible to create using traditional methods. In addition, CNC machining services are much less expensive than traditional manufacturing methods. As a result, more and more companies are turning to CNC machining services to produce their products. All of these factors are expected to contribute to the continued growth of the CNC machining service industry in China. We are confident that the future of CNC machining in China is very bright, and we look forward to continuing to grow with the industry.\nIt is clear that the future of CNC machining service in China is looking bright. With the rapid development of technology and increase in demand for CNC machining services, more and more companies are entering the market. This is good news for consumers because it will lead to increased competition and ultimately better quality and lower prices. As the industry continues to grow, it will be interesting to see how different players compete and carve out their share of the market. So far, it looks like China is poised to become a global leader in CNC machining services.", "label": "No"}
+{"text": "Your IP Address is: 126.96.36.199\nÅland Islands Stamps->\n|_ Early Denmark\n|_ Commemoratives to 1979\n|_ Commemoratives 1980 to 1999\n|_ Commemoratives 2000 to present\n|_ Denmark Definitive Stamps->\n|_ Denmark Stamp Booklets->\n|_ Denmark Packs\n|_ Denmark Year Books\n|_ Machine & Exhibition Labels\n|_ Denmark Covers & Cards->\n|_ Postfærge Postage Due Newspaper->\n|_ Denmark Christmas Seals\n|_ Danish West Indies->\nFæroe Islands Stamps->\nGreat Britain Stamps->\nEuropa / C.E.P.T. Stamps->\nRest of the World->\nStamp Collecting Accessories->\nCinderella, Labels etc.\nLatest Additions ...\nAll Products ...\nJust received my first order from you.\nStamps arrived in great condition and well packaged too.\nThanks for a quick and great service.\nScotland co stamps\nHi From Pakistan I received your stamps with Hawid mount paking are A grade.Omer\nI just received my Facit 2010, and new tongs.\nShipping was very fast, and the items were packed with the utmost care.\nI am very pleased!\nI have received this order already THANK YOU very much. your company are the quickest to receive and deliver an order that I have dealt with. I have...\nThanks for the excellent service!\nMany thanks for the on time delivery, great communication and above all, the very nice packaging with beautiful stamp!\nHave you seen ...", "label": "No"}
+{"text": "Veterinary science deals with the health and wellbeing of animals. It was introduced in 2011 and is an internationally recognised and recommended approach and will continue to allow graduates to register and work as veterinarians in South Africa. It is the second oldest faculty in Africa, dating back to the early 1920’s. Powered by Job Mail Copyright © Junk Mail Publishing (Pty) LTD 2020, all rights reserved. Graduates of the Faculty enjoy national and international recognition and the BVSc degree of the University of Pretoria currently enjoys recognition for registration by the Royal College of Veterinary Surgeons (RCVS) in the UK, the Australasian Veterinary Boards Council (AVBC) in Australia, New Zealand and Tasmania as well as by the relevant authorities in Malaysia. The Department comprises four sections representing the primary disciplines of Pathology, Pharmacology, Toxicology and Veterinary Public Health. Prospective vets will then spend the next 5 years on this campus as it is a 6-year degree, before specialisation. South Africa's food security and animal disease control will be severely at risk if there is no sufficient supply of veterinarians and veterinary nurses for state veterinary services or for rural areas and farming communities. Hi I’m Ntsikelelo Vava I want to become a vat I’m in ELSENBURG COLLEGE I’m doing animal small stock and large stock I want to know what must I do when I’m done here? How Much Will Paramedic School in South Africa Cost? The Department was formed in May 2001 following restructuring at the Faculty. It is once again the only one of its kind in South Africa. The residence at the Faculty is known as House Onderstepoort. 0028, Location: I need to know more about animal health and am thinking to study as a veterinarian. The new National Faculty created in this way continues to use the facilities of the Onderstepoort campus of the University of Pretoria and continues to function as a fully-fledged faculty of the University of Pretoria. The improvements made Onderstepoort the second largest University sustained residence at the University of Pretoria. This places a special responsibility on the Faculty and University to meet the national needs in the provision of veterinarians and veterinary nurses to serve all sectors of veterinary endeavors. Academic semesters are of equal length (approximately 14 weeks) with recesses during Easter, July and December. I want to be a Veterinanian but i dont know which subjects to choose next year. The improvements made Onderstepoort the second largest University sustained residence at the University of Pretoria. Hi sir,i am Veronica Mofokeng from freestate am currently doing animal production NQF level 4,so I would like to be veterinary what are the requirements? It will deal exclusively with basic veterinary disciplines such as Anatomy, Histology, Microbiology and Physiology as well as modules in Animal Science, Pasture Science and Professional Life. Hi Wihan – You’ll have to ask UNISA what the difference is and if you can study to become a Vet via them. The Faculty of Veterinary Science of the University of Pretoria is one of 46 veterinary faculties in Africa and the only one of its kind in South Africa. Candidates that have been involved in community projects for a while prior to application definitely have a higher chance of getting in. We’d like to suggest that you get in touch with the universities you are considering to find out what they have to offer with regard to this. Copyright © University of Pretoria 2020. The closing date of the Faculty of Health Sciences and Veterinary courses for both South African and non-South African students. It is worth noting that after completing the 6-year BVSc degree, the undergraduate can go on to specialise in an area of their chosen field. The Onderstepoort campus of the University is 30 km north west of the main campus in Hatfield and 15 km north of the city center of Pretoria. Last modified Aug 2, 2019. Existing facilities and the security of the residence were also upgraded and refurbished. Good luck with your studies, Required fields are marked *. Veterinary science was formalized as a discipline in the 18th century, when a host of specialized colleges were established across Europe. Contact someone who is a Veterinarian to confirm Nicky. When this facility became unsuitable in 1905, Theiler was instrumental in establishing a new facility at Onderstepoort in 1908, which became the current Agricultural Research Council's Onderstepoort Veterinary Institute. In 2008 a total of 99 students graduated and this grew to 119 in 2009. New facilities were inaugurated at the end of 1921 and the first residence was opened in 1924. These divisions are: In the domain of Tropical Animal Health, the Department of Veterinary Tropical Diseases (DVTD) is well positioned to play a leading role, especially in research and the training of postgraduate students of the region and further afield.. Very few students have a lot of experience in community projects to add to their application. Research areas are focused upon metabolic adaptation of indigenous sheep and goats, water and electrolyte balance in sheep, and certain facets of nanotechnology. The latter will run throughout the programme and concentrate on the soft skills and ethical and professional aspects of the veterinary profession. more than most other degree programmes. The Department was formed in May 2001 following restructuring at the Faculty. Disclaimer | Is Unisa the only way to do the studies part time/ correspondence as I am already otherwise employed? The numbers fluctuated around the 40 mark until 1978 and was followed by the first large batch of graduates in 1979 (69) following an increase in the intake of second year students in 1976. Hatfield The diploma programme requires two years of full-time study at the Onderstepoort campus of the University of Pretoria. The first batch of graduates to exceed 40 in number, qualified in 1967. The undergraduate veterinary programme has developed from the original 5-year programme to a five-and-a-half-year programme in the mid 1970s, 1980s and early 1990s. The Faculty will admit students to the first year of Veterinary Science (BVSc I) as well as to the second year (BVSc II) according to its selection regulations approved by Senate. The Phytomedicine programme is also hosted in the Department. The numbers fluctuated around the 40 mark until 1978 and was followed by the first large batch of graduates in 1979 (69) following an increase in the intake of second year students in 1976. This article is about the University of Pretoria faculty. All three institutions are independent. Submit the form below to get in touch with Rosebank College directly and gain access to further course information and funding opportunities. This Faculty admitted its first students in 1982, produced its first graduates in 1987 and was amalgamated with the Faculty of Veterinary Science of the University of Pretoria in 1999. Universities Offering Diploma in Animal Health and Production(Animal Health and Production) University of Nairobi Faculty of Veterinary Sciences, Nairobi Entry requirements: -The common admission requirements for diploma courses of the University of Nairobi, Faculty of Veterinary Medicine shall apply. The new laboratory building which is still known as the \"Main Building\", the quadrangle of stables behind it, and other necessary facilities and staff houses were completed and ready for occupation by October 1908. Conferment of the honours degree is not subject to future registration in the master's degree programme. , The Department of Companion Animal Clinical Studies is responsible for teaching, service rendering and research in the disciplines of Anaesthesiology, Clinical Pathology, Dentistry, Diagnostic Imaging, Ophthalmology, Equine Medicine & Surgery, and Small Animal Medicine & Surgery. Attendance is compulsory. And how do I get from studying through UNISA to being a Vet? In the fourth year, the student will be introduced to modules aimed at diagnostics and therapeutics and in the first semester of the fifth year with community interaction. Existing facilities and the security of the residence were also upgraded and refurbished. What subjects are needed for becoming a veterinarian? These activities are further facilitated by well developed support services provided by an academic hospital, various departmental laboratories, general and student administrative sections, a teaching animal unit and a number of research centres. I am in high school and I was wondering if life science is required at university of Pretoria if I want to do a course in veterinary science. Hi Vijay – Take note that this is the requirements in South Africa. The first year is devoted to more basic courses in Anatomy, Physiology, Pharmacology, Ethology, Microbiology, Parasitology, Laboratory Technique and General Nursing. Our best suggestion would be to decide on a few institutions you would like to study at, then find out what their requirements are for studying to become a vet. We suggest getting in touch with the institute of you choice and discussing the next steps with them. The Faculty of Veterinary Science is a faculty of the University of Pretoria.", "label": "No"}
+{"text": "Boys and Girls Islamic Names With Meaning\nFeatured Islamic Boys Names\nFeatured Islamic Girls Names\nA new born has come to your house and now you are wondering of giving your baby the most wonderful name? get along with urdu point as it possesses a magnificent compilation of Islamic Names in English. Urdu Point’s muslim names category is further split up into two categories of Islamic Baby Names i.e. Islamic Boys Names in English and Islamic Girls Names in English according to the gender. So now get your boy with the most amazing Muslim Names in English of you own choice.\nUrdu Point not only presents you a list Islamic Girls Names in English and Islamic Boys Names in English with their Muslim Names Meanings in English, an elaboration is also their about Islamic Names of Boys which includes language, gender, origin, details, lucky number, suitable day of the week, the right gemstone and appropriate metals.", "label": "No"}
+{"text": "Dating is tricky any kind of time get older, filled with enjoyment and headaches. Online dating after splitting up isn’t any exception. It could be complicated for ex-spouses to need a step towards watching people latest for the reason that all of the stress and anxiety, specifically those initial times. Furthermore, it might appear the formula with the video game have changed even though you were https://datingrating.net/geek-dating-sites/ partnered. You will no longer learn how to play it.\nSometimes, men and women skip that internet dating is not just about looking for a life partner. Alternatively, it is the opportunity to satisfy individuals, find out more about all of them, and also about your self. If you alter your belief some, you may enjoy your own dates much more.\nHere, we will display quick but efficient guidelines on how to beginning internet dating after a splitting up and what you should do to help make your own dates get better. These dos and wouldn’ts benefit both males and females, therefore we wish they’re going to supply some self-esteem in your post-divorce passionate existence.\nHow Quickly to Date After Breakup?\nThere is no solitary correct response to this matter. Every person chooses on their own if they are willing to just take this step. However, it’s better not to rush into a partnership immediately after you ending the last one.\nIn 2019, Worthy interviewed more than 1,700 lady from over the United States, while the listings showed that:\nFor men, there are not any these step-by-step studies. However, we’ve reviewed numerous options and can determine that men react slightly in a different way after a breakup. For instance, some will skip the grieving process, that will be a fundamental element of post-divorce data recovery. Hence, they you will need to get back on patio immediately and start online dating prior to when people.\nTaking some slack is extremely important to keep their psychological state, think on previous knowledge, and understand your own instructions. During this time period, a person can abstract from thoughts and know the way they would like to establish their unique existence.\nKala Gower, a matchmaking coach from partnership character, aids the notion of having a rest to recover after split up. She explains: “getting and getting into a relationship should come from a wholesome put. The person who actually at their finest whenever starting more simply attending pull their new partner straight down additionally the connection are going to be poor from the beginning.”\nFor a lot of, it may take one month for other people, a whole 12 months. However, the full time spent is not the main criterion the quality of the work you’ve accomplished was.\nAnother important word of advice will be hold back until your own separation and divorce was officially finalized. “while you might become the matrimony has ended or have-been live individually for some time, dating some body while you are nevertheless partnered can complicate factors. Occasionally, it might probably intensify their union with your potential future ex and telephone call into concern your entire past contracts,” says Melissa Tenny, movie director of appropriate Document Compliance at CompleteCase, the leading on line divorce case providers in the united states.\nFast Start Guidelines\nBefore starting internet dating after a splitting up, you will want to consider three issues:\nIt is advisable when your answer is “i’m nothing” or something like that such as that. If you nonetheless feel frustration, resentment, or any other unfavorable thoughts, most likely, you’ve not recovered through the breakup but. Hence, old problems can spill-over into your brand-new relationship.\nRender a listing of what’s critical to your predicated on your own earlier connections. Start thinking about both positive and negative encounters.\nA night out together try an adventure. It requires the right mindset and state of mind. If considering witnessing some one allows you to feel worried or anxious, it should be a bad time and energy to do it.", "label": "No"}
+{"text": "Cardiff Coffee FREE Business Network 5th February All Welcome\nCardiff Open Coffee\nYou are invited to our next FREE event, You may now book your ticket on the link below or this link.\nThis is a short introduction about the event:Â Cardiff Open Coffee is a relaxed Business Networking Event for All, Everyone is welcome from Entrepreneurs, Decision Makers, Artists, Writers, Journalists, Talented people looking for career changes and Graduates. It is organized by Elio Assuncao and we look forward to welcome you.Cardiff Open Coffee\nThe members and visitors that attend the Network are friendly, inspiring and willing to help each other the best they can including market tips and insights, thus grow their businesses.", "label": "No"}
+{"text": "Watch Your Mouth Ashlee! Simpson Drops F-Bomb In New Music Video\nBy Alexis Tereszcuk - RadarOnline.com Entertainment Editor\nAshlee Simpson is getting her music career back on track and in the middle of her father Joe Simpson’s growing gay scandal she released a brand new sexy and sultry single where she drops the F-bomb!\nJessica’s little sister is flaunting her super thin frame in the minute-long black and white music video for her new song Bat for a Heart.\nAshlee, 28, warns fans that the song is a little raunchy, Tweeting: \"In this tease I do drop the F bomb, so you’ve been warned!\"\nAs she dances around in the video she sings \"I’m gonna bang, bang f**k you up,\" and rocks a short blonde hairdo.\nHer proud Papa Joe has been promoting his daughter’s new album on his own Twitter page, but she and her sister Jessica and their mother Tina have not been spotted with him since the news of his alleged trysts were reported.\nNow a mother of 3-year-old Bronx, Ashlee hasn’t released a single since 2008’s Little Miss Obsessive and is slowly getting back to work.\nCheck out her new video (WARNING: the song has the F-word) and tell us in comments if you like Ashlee’s new song.\nLane Garrison Defends Joe Simpson, Says He Doesn’t Believe Gay Allegations\nJoe Simpson's Gay Male Escort Tells All: 'He Had An Insatiable Appetite For Sex'\nAb Fab Fedora, Joe! Simpson Shows Off More Flamboyant Look In Wake Of Gay Scandal\nRevealed! How Joe Simpson’s Wife Discovered His Affair With A 21-Year-old Boy Toy", "label": "No"}
+{"text": "Shirdi sai baba parayanam in telugu-pdf\nCategory : Medical\nTo download SHIRDI SAI BABA PARAYANAM IN TELUGU-PDF, click on the Download button\nAs a well-built app, it's a welcome improvement to the standard taskapplication management available in OS X. The interface is customizable and you can show or hide brother hl 1435 printer driver sidebar and information bar to your right. rar files, so if you want to expand these kinds of files (usually from PC users), you'll need to download some sort of unarchiving app to do paraganam. installs and configures like any Firefox add-on. Content rating: Low Dai From Shirdi sai baba parayanam in telugu-pdf Bored on public transit.\nthink it's shirdi sai baba parayanam in telugu-pdf were more\nShirdi sai baba parayanam in telugu-pdf - recommendnet online backup service, and the Verify Extension Directory tool. is a free CVS client that shirdi sai baba parayanam in telugu-pdf itself into shirdi sai baba parayanam in telugu-pdf Windows shell with context menu entries as well as tortoise icons identifying all CVS-controlled files. However, after taking shirdi sai baba parayanam in telugu-pdf deep breath and experimenting for a few minutes, we developed a shirdi sai baba parayanam in telugu-pdf shiddi of how everything functioned.\nThere shirdi sai baba parayanam in telugu-pdf also a very accessible option to switch the writing direction from right to left. After installation, will open to the full calculator view, showing more than 75 buttons onscreen, including standard number pad and si, and then everything from cosine and arcsine to exponents, logarithms, and derivatives. TurboZip no longer requires personal information to be submitted before installing the trial, but it does opt users in to installing TurboZip Express.\nDuring our tests found valid and deleted Outlook Express accounts and the vast majority of saved sites in Internet Explorer.", "label": "No"}
+{"text": "Ok guys and squirrels, we need a get together for the southbay crew and whoever else can make it. Looks like a great time to have a BBQ potluck, bring the family, dogs, footballs and Frisbees.\nWhen: Saturday Sept 28th\nTime: 1 PM to 5 or whatever\nPlace: Santa Teresa County Park (which entrance and which grounds will be worked out soon) http://www.sccgov.org/sites/parks/Ri...unty-Park.aspx\nLet's show off our trucks and the awesome folks that we are and get a whole bunch of us there!\nWhat we need:\nA couple of webbers with charcoal would be perfect, stuff to cook, plates, utensils, condomints, side dishes, drinks, the whole enchilada! let's get the attend/food list going, see you there!\n1. acdronin MEAT (of some kind)\n2. razgriz key lime pies\n3. machineman89 Weber + ?\n4. Bayarearunner Weber\n5. Eric Trd4life Tater salad\n6. AlphaQUp Rueben and crew\n8. bjmoose (maybe)\n9. the glen (hot links)\n10. nagorb & Co (mac salad) NOT!\n11. babytruck Yep", "label": "No"}
+{"text": "“I am a companion of all those who fear You, and of those who keep Your precepts” (Psalm 119:63)\nWhen we take a team of girls on the road to lead Bright Lights conferences, we all enjoy the fellowship and good times we have together. Unfortunately, when we come home everyone is busy and we don’t see each other very much. Because of this, we were grateful to our friend Lena for setting up a formal Christmas party in her home for some of the Bright Lights leaders who were able to make it. Here are a few pictures…\nRebekah, Katie, Ellen and Sarah\nYou look beautiful!!!\nThat must have been such a nice evening together. 🙂\nLooks like you all had fun! Love all the gorgeous dresses. Isn’t it fun to get all dressed up? 😀\nWow looks like you all had a wonderful time! You all look sooo beautiful. Supriya\nYou all look so beautiful!\nLooks like you had a great time at your christmas party!\nComments are closed.", "label": "No"}
+{"text": "ah mean howa? beer is different david!\nas a ghey bar tender you should know that dude!\nBTW chez I'm back to level 30 on GT5 a-spec. How long has that taken! Must back up my PS3 this time ;)\n7th prestige on WM3 while we are at it.........:icon_thumright:\nchez will you have to chip in against a roco, any idea what you'll get for the waggon? our lass has been trying to get me to go the other way :(\nFred i ment about the state the previous owner got the wheels into. Have no doubt you knew what you where buying fella lol, makes sense what your saying about the wheels with you taking it down the track. What you trying to get off that spaz just down the rd\nDave you still loving the mini\nnow that your nearly done fred you should get mw3 and play me and welly sometime dude!\nno idea damo but i have a plan,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,, ,,,,,,\nBeen in the *** van all week damo...my mrs was an indian giver....:)\nget a deal done with mr damo Chez...:beerchug:\nThey sound a bargain westy, pics or link....:sly:\nmy mate had OZ super turismos on his daihatsu charrade gtti years ago! looked awesome!\nas you were...........................\nHaha fk that it's going nowhere David !! Never trust a woman lol did you stick her in the van first ?\nEasy get Karl to TWOC one chez ;)\nFk me. Iv just lost almost an hr in time!! My last post I started writing *** ages ago :wtf:\nTrue Fred but I think I nodded off, woke up then finishes what I was typing ;)\n*** admin colour coded :cheers:\nMorning guys, another busy day for me.....but the sun is shining so its all good..\ndaddy day care duties for this fella today!\nterrible 2 syndrome to maximum effect!\nbut i do get 2 hours off to hit the gym and get some peace!\na very misty morning on the coast today which usually means it will get out sunny later on!\nFoggy as fook round here but apparently going to clear and be 20 degrees later. I cant believe that some people are driving around in this fog with no lights on!!!\nIm getting sooo sick of them blue *** headlights and fogs.....\nsame here chaps... foggy as a mofo, hopefully will clear up later.\neasy day for me today I think, bit of remote programming a plenty of coffee. After yesterdays running about chasing the lil dude its welcomed, Im shattered today.... Good luck chezza ;)\nGood Morning guys, its a little misty here but hope it clears, would be good to have some sunshine. Hope you all have a good day. :)\ni love driving in the fog in the morning... everything looks so mysterious :)\nat night though it gets on my nerves! cant see sh*t!\nyou think the fog was bad though? i got stuck driving behind the royal horses of greenwich :mad:\nASN is running quick today.... that'll be the 60meg connection then. :)\nFastest speed I have seen on speed test is 35meg, which is plenty quick enough.\nYou can be the Gif thread mod from now on then Joe!", "label": "No"}
+{"text": "How To Recover SEO Rankings?:\nRecovering SEO rankings can be a challenging task, especially if you're not sure where to start. However, there are some basic steps you can take to improve your rankings and get your website back on track.\nRecover SEO rankings:\nHere are 5 proven tips to help you recover SEO rankings:\n1. Conduct a website audit:\nStart by conducting a thorough website audit to identify any issues that might be hindering your SEO efforts. This could include broken links, duplicate content, slow-loading pages, or other technical SEO issues that need to be addressed.\nYou can benefit from the Ahrefs Webmasters Tool, which is free and can assist you with website audit findings on a weekly or monthly basis as per the schedule you set that happens automatically shared through mail reports.\n“Auditing the content on our site will always be a best practice, and it’s a great process to go through as you can uncover a lot of hidden gems while also identifying what other content updates, optimizations, or net new creations the site could benefit from” – Search Engine Journal\n2. Focus on your content:\nContent is king when it comes to SEO, so make sure your website has high-quality, relevant, and unique content that is optimized also for search engines.\n“Developing quality content around a very specific topic may help you attract a more committed and loyal following, who relies on you to regularly deliver the content they’re seeking” – Google for Creators\n3. Build high-quality backlinks:\nBacklinks are an important ranking factor for search engines, so make sure you're building high-quality links from reputable websites.\n“Articles with “Mistakes To Avoid” titles and Guides get the most shares. How To and Comparison articles attract the most backlinks” - The State of Content Marketing 2023 Global Report by Semrush\n4. Optimize your website for mobile:\nWith more and more people accessing the web on their mobile devices, it's essential that your website is mobile-friendly. Make sure your site is optimized for mobile devices, with responsive design and fast-loading pages.\nAs per the Digital 2023 Global Overview Report by Meltwater and We Are Social, the share of web traffic by devices is as follows: mobile phones (59%), laptops and desktop computers (38.99%), and tablets (1.98%).\nGoogle uses mobile-first indexing. That means it “predominantly uses the mobile version of the content for indexing and ranking.” So any time Google indexes and ranks your content, it prioritizes the mobile version of your site” - Semrush\n5. Monitor your progress:\nFinally, keep a close eye on your SEO rankings and monitor your progress over time.\nUse Google’s free tools like Google Analytics and Google Search Console to track your traffic and keyword rankings, and make adjustments as needed to stay on top of the latest SEO trends and best practices.\nEach website owner including the content owner can track, edit, improve, update existing content, or create new content using the insights from these tools that helps to increase rankings in the search engine result pages (SERPs).\n\"Regardless of your industry, company, and product or service, marketing isn’t a set-it-and-forget-it practice. It’s constantly evolving, which means you need to constantly monitor, evaluate, optimize, and tweak where needed\" - SmartBug and rockcontent [Report for 2023]\nPro-Tip: Ensure that your content is written primarily with the user's [readers'] needs in mind rather than for the sake of search engines. According to Google's Helpful Content Update Algorithm, people-first content strategies are highly rewarded.\n“By updating your content on a regular basis, you can improve your on-site experience for your users, keep competitors from encroaching on your rankings and traffic, and also optimize your site more efficiently by making the most of ranking signals that you’ve already earned” – Wix SEO Hub’s Resource Post\nOverall, recovering SEO rankings requires a holistic approach that involves optimizing your website for search engines, creating high-quality content, building backlinks, and monitoring your progress over time.\nBy following these tips consistently, and staying up-to-date with the latest SEO trends and best practices, you can improve your rankings and drive more traffic to your website.\nHere's related information that you may find helpful – Page Speed Ranking Factor To Improve SEO Rankings\nP.S: Ready to [unlock the power of digital marketing] and drive [your] business forward? – Access my forum today\nP.S.S: Please don’t forget to forward this blog post to your network so they can get the best tips, practices, strategies, education, resources, & tools to help their businesses grow [sharing is caring].", "label": "No"}
+{"text": "Ross Douthat in the NYT riffs on the topic of esoteric knowledge (which I discussed recently in Taki’s Magazine):\nThe Cult Deficit\nSEPT. 27, 2014\n… From the 1970s through the 1990s, from Jonestown to Heaven’s Gate, frightening fringe groups and their charismatic leaders seemed like an essential element of the American religious landscape.\nYet we don’t hear nearly as much about them anymore, and it isn’t just that the media have moved on. Some strange experiments have aged into respectability, some sinister ones still flourish, but over all the cult phenomenon feels increasingly antique, like lava lamps and bell bottoms….\nTwice in the last few months I’ve encountered writers taking note of this shift, and both have made a similar (and provocative) point: The decline of cults, while good news for anxious parents of potential devotees, might actually be a worrying sign for Western culture, an indicator not only of religious stagnation but of declining creativity writ large.\nThe first writer is Philip Jenkins, a prolific religious historian, who argues that the decline in “the number and scale of controversial fringe sects” is both “genuine and epochal,” and something that should worry more mainstream religious believers rather than comfort them. A wild fringe, he suggests, is often a sign of a healthy, vital center, and a religious culture that lacks for charismatic weirdos may lack “a solid core of spiritual activism and inquiry” as well.\nThe second writer is Peter Thiel, the PayPal co-founder, venture capitalist and controversialist, who includes an interesting aside about the decline of cults in his new book, “Zero to One” — officially a book of advice to would-be entrepreneurs, but really a treatise on escaping what he regards as the developed world’s 40-year economic, technological and cultural malaise. …\nThiel’s argument is broader: Not only religious vitality but the entirety of human innovation, he argues, depends on the belief that there are major secrets left to be uncovered, insights that existing institutions have failed to unlock (or perhaps forgotten), better ways of living that a small group might successfully embrace.\nThis means that every transformative business enterprise, every radical political movement, every truly innovative project contains some cultish elements and impulses — and the decline of those impulses may be a sign that the innovative spirit itself is on the wane. When “people were more open to the idea that not all knowledge was widely known,” Thiel writes, there was more interest in groups that claimed access to some secret knowledge, or offered some revolutionary vision. But today, many fewer Americans “take unorthodox ideas seriously,” and while this has clear upsides — “fewer crazy cults” — it may also be a sign that “we have given up our sense of wonder at secrets left to be discovered.” …\nDo we have fewer cults or do we just not notice them?\nToday, for example, it seems obvious that Freudianism was a cult, but it was treated with immense respect in post-WWII America. Vladimir Nabokov had the aristocratic self-assurance to scoff publicly and repeatedly at Freud, but how many other men of reputation dared?\nFor example, few called Stephen Jay Gould a cult leader, but the man who told his followers — “Say it five times before breakfast tomorrow; more important, understand it as the center of a network of implication: ‘Human equality is a contingent fact of history’” — can perhaps be understood as the type of soothsayer who tries to hijack the prestige of science for his own anti-scientific purposes in the tradition of Sigmund Freud, Karl Marx, Ayn Rand, and L. Ron Hubbard.\nThen there’s also the issue that highly successful cults stop seeming like cults and start seeming like inevitabilities. For example, consider the rise of the Harvard-Yale cult. In Presidential elections from 1900-1984, the major party nominees possessed 9 degrees from Harvard or Yale between them, or 0.20 per nominee. But as higher education spread in America, the opposite of what you’d naively expect happened: from 1988-2012, the 14 Presidential candidates had 15 Harvard or Yale degrees, or 1.07 each.\nIndeed, five of the last 14 Presidential nominations have gone to old Bonesmen. In 2004, both nominees were members of Skull and Bones, the most cult-like oogah-boogah cult within the Harvard-Yale cult: the most famous relic within Skull and Bones’ windowless shrine/fortress on the Yale campus is the skull of Geronimo, which is there because it was grave-robbed by the ancestor of two Presidents.\nThe whole point of Skull and Bones is to create a tiny self-perpetuating elite within the small elite of Harvard-Yale insiders: e.g., Secretary of State John F. Kerry (Class of ’66) was one of the Bonesmen who tapped the Class of ’67 Bonesmen who tapped President George W. Bush (Class of ’68). Thus having both Presidential nominees be Bonesmen is just the fulfillment of the plan.\nBut mentioning this only proves you’re some kind of wacko conspiracy theorist: everybody knows that any domination of Harvard-Yale alumni over Presidential elections is just one of those things that is and ought to be.\nBut in the intellectual realm, the stagnation he identifies seems readily apparent, since whole swaths of political, ideological and religious terrain that fascinated earlier generations have been mostly written off in ours. As Mark Lilla noted in a recent New Republic essay, it’s not just that alternatives — reactionary, radical, religious — to managerial capitalism and social liberalism are no longer much embraced; it’s that our best and brightest no longer seem to have any sense of why anyone ever found alternatives worth exploring in the first place.\nPerhaps the sacrifice is worth it, and a little intellectual stagnation is a reasonable price to pay for fewer cults and Communists.\nOr maybe the quest for secrets — material or metaphysical, undiscovered or too-long forgotten — is worth a little extra risk.\nOr maybe the real secret is the one you find out inside the Skull and Bones fortress of elitism: It’s now what you know, it’s who you know.\nOne reason we aren’t as aware of cults is that they have become much more open about promoting themselves. Consider the evolution of cult-like conspiracies among the rich and powerful from the Bilderbergs to Davos. For the last 60 years, the Bilderbergs have been a secret society of billionaires, hereditary monarchs, and intellectuals who get together periodically in luxury hotels for secret discussions of major trends in world affairs and how they can mold them for the good of people like themselves.\nBut the covert Bilderberg kind of conspiracy seems so James Bond Era-ish. In contrast, Davos is a post-modern conspiracy based on massive publicity: rich people invite journalists to lecture them and then the journalists write articles about how wonderful and forward thinking and open to important new ideas the rich people are, and everybody posts online their selfies with each other. Lately, even the Bilderbergs have started to publish their invite lists to get in on the publicity.\nSimilarly, consider two cults that grew out of the Golden Age of Science Fiction: the modern cult of Scientology and the postmodern cult of transgenderism and transhumanism, as exemplified by my old MBA classmate Martin/Martine Rothblatt, a founder of satellite radio, and now promoting his/her book Virtually Human about downloading your brain to a computer so you’ll live forever.\nL. Ron Hubbard was a hack sci-fi writer with a winning manner who impressed more impressive friends such as editor John W. Campbell (who promoted Hubbard’s Dianetics as a low cost alternative to the Freudian talking cure) and author Robert Heinlein (who, perhaps apocryphally, is said to have given Hubbard the idea to convert Dianetics into a tax-exempt religion).\nIn the Scientology cult, the exoteric ideas sound pretty plausible (you have various psychological issues weighing you down and you should talk to a trained listener about them), but the esoteric ideas that are finally revealed (it’s the fault of the space alien Thetans!) mostly seem to pass muster with people with a talent for playing make believe (Tom Cruise etc.)\nThe modern transhumanist movement, including the phenomenon of domineering masculine heterosexual guys suddenly announcing they are women, has ties to Golden Age sci-fi as well. The urge to leap the bounds of sex and death was an esoteric theme that popped up now and then in Heinlein during his long prime, 1939-1966 (e.g., his last short story “All You Zombies”). It then came out of the closet after the societal constraints came off at the end of the 1960s and he returned to writing in the 1970s after major cerebral health problems. (Heinlein was too sane and reasonable a guy to found a cult like Hubbard or Rand did, but you can imagine the temptations.)\nBut transhumanism always seemed like kind of a wacky egomaniacal libertarian white guy thing. Now, though, it’s edging toward being fashionable via transgenderism as a way for egomaniacal white guy libertarians to get in on the victim parade by standing up for fellow egomaniacal white guy libertarians like Dr. McCloskey. (Is the world “fellow” transphobic?)\nBut this rising system of nutty belief is structured the opposite of Scientology, which tries to lure you in first before unloading the esoteric crazy stupid stuff. Transgenderism demands that you assent to the crazy stupid stuff upfront:\n“Remember that guy you went to MBA school with who was obsessed with space exploration and already had a passel of kids and was supersmart, but was just a giant dick to anybody he thought wasn’t as smart as him (which was everybody)? Well, now he’s the highest paid female CEO in America because, it turns out, he was always actually a woman and you have to call him “her” when reminiscing about him. Oops, I’ve should have said ‘She was always actually a woman and you have to call her “her” when reminiscing about her always being a giant prick.’ I don’t want my career flushed down the toilet like that poor guy in Grantland for getting on the bad side of the Trans Power and their vast numbers of volunteer enforcers.”\nIn today’s world, the real esoteric cult knowledge, the kind that you have to come to obscure corners of the Internet to learn, is that this is sci-fi libertarian wackiness.\nIf you want to be a new L. Ron Hubbard, you should put your craziest craziness out in public and dare anybody to prove themselves a low brow bigot by scoffing at it. Don’t hide the Thetans away until Tom Cruise has spent years being prepared to learn about them. Instead, make the Thetans a victimized minority about whom awareness must be raised. Assert that a tiny percentage of humanity (i.e., your followers) are the descendants of a supersmart alien race, and that this poor minority has always been oppressed and victimized by the human majority for their secret superpowers.\nSomething like that just might work.", "label": "No"}
+{"text": "Method: First, relative rate indices (RRIs) were calculated for Black youth and youth of other races compared to White youth referred to the state juvenile justice agency in 2018. RRIs were also calculated for the sub-sample of youth referred to counties with community social workers. Logistic regression models were conducted to compare legal outcomes (i.e., receiving confinement dispositions and being waived to adult court) longitudinally (using a sample of youth in counties with social workers in 2018 compared to youth in those same counties in 2011 before social workers were employed) and cross-sectionally (comparing youth in counties with social workers in 2018 to youth in counties without social workers in 2018). The logistic regression models were also run with subsamples of Black youth only. Qualitative interviews with nine of the 11 community social workers were used to identify and understand the mechanisms, barriers, and facilitators for reducing DMC. Interviews were transcribed and coded for overarching themes.\nResults: The results indicate that DMC continues to exist in South Carolina when measured via relative rate indices. Multi-variate analyses gave little indication that employing community social workers is sufficient to reduce DMC at the disposition or waiver stage. The findings suggest multiple nuanced ways the social workers can play a role in reducing DMC. The social workers identified two stages in the juvenile justice process in which they can and have had an impact on increasing equity: (1) out-of-home placement decisions for youth on probation or parole and (2) determining probation requirements. The social workers described a need for hiring additional social workers. They also believe they could train police officers and school officials about alternatives to making a referral to SC DJJ to reduce inequitable decisions at the front-end of the juvenile justice system.\nImplications and Conclusions: Implications for the study include an expanded role for community social workers (i.e., increased community outreach and training) and new ways to examine DMC quantitatively (i.e., different outcome measures and focus on local decision-making) and qualitatively (i.e., ethnography).", "label": "No"}
+{"text": "Brian Provinciano doesn’t expect to profit from WiiWare release\nBrian Provinciano wanted to keep his word. That is the reason Retro City Rampage released on WiiWare earlier this week. Its developer has no expectation of turning a profit on the platform, calling the move a “$20,000 gift to fans.”\n“It’s only being released as fan service,” Provinciano told Nintendolife in a recent interview. “Had I not done the WiiWare version, I could’ve saved around $20,000.”\nThe Wii may have an incredibly large install base, but WiiWare never really panned out. Despite the service being significantly less popular than Nintendo had expected, the platform holder continues to set quotas on new releases. If games don’t sell enough copies, the developer doesn’t see a cent.\nRetro City Rampage may yet surpass Nintendo’s sales threshold, but that isn’t the only issue at play. Provinciano wound up spending a significant portion of his budget on account of an office space requirement. He could have easily cut costs by working from home had the measure not been in place.\nNintendo has taken feedback to heart in an effort to improve the situation. As a result, these policies have changed with the release of the Wii U and 3DS. Still, things look grim for WiiWare going forward. Retro City Rampage could very well wind up being the last of its kind.\nVblank Entertainment: Retro City Rampage on WiiWare is a ‘$20,000 Gift to the Fans [Nintendo Life]", "label": "No"}
+{"text": "Anna BäckströmHead of professional services\nAnna’s passion is to connect deep psychological understanding and technology insight in a meaningful and engaging way. Anna has 20 years of experience in consumer research, and holds a doctoral degree in Social psychology. In 2013, she was nominated as Adjunct professor of Social psychology at the University of Helsinki. Currently, she is working as Head of Professional Services and Head of People at Fourkind, Helsinki, recently acquired by Thoughtworks.", "label": "No"}
+{"text": "Friends WE Love!\nSee the latest and greatest from the Games You Loved Retro Gaming Community and our 'friends page'\nWe think the retro gaming community is just amazing! So this is the area where we see the best of what's out there in the virtual world of social media and the real world of events, venues and gaming things to do.\nOur dedicated \"friends\" pages can be accessed here\nKickstarter Testimonial pages here where you can find out how GamesYouLoved successfully support and promote gaming crowdfunding projects on Kickstarter.", "label": "No"}
+{"text": "Thomas Edison, the iconic inventor and entrepreneur best known for developing the motion picture camera, the phonograph, and of course, the practical light bulb, dabbled with some strange, relatively esoteric scientific experiments in his time. One of the most seemingly bizarre was the attempted creation of an instrument now known as a “spirit box” or “spirit phone,” which could’ve theoretically allowed the living to communicate with the “personalities” of the dead. But the legendary innovator had much loftier goals than simply trying to “Yo” the deceased and strike up a conversation. He was trying to pinpoint the essence of life itself, and determine if some fundamental part of who we are carries on in some form after we die.\nIn other words, the spirit box wasn’t only designed to be a souped-up scientific seance machine, it was also supposed to be a means of verifying Edison’s larger theory about the physical nature of life, and dare it be said, the “soul.” From a Modern Mechanix magazine, which discussed Edison’s attempts to communicate with personalities. Image: Public Domain\nThe story of the spirit box, which comes via Atlas Obscura, is often told around this time of year, with some spooky flare, and hints that Edison may have had some kind of morbid desire to communicate with the dead. (Or at least incentive due to the many families who lost loved ones in WWI.) But the innovator and magnate often took great pains to point out to reporters that he was completely opposed to any kind of “spirit” that existed after a person died, and that he was simply trying to offer a means for communicating if there was anything with which to communicate.\n“I cannot be a party to the belief that spirits exist and can be seen under certain circumstances…” Edison told Scientific American in an interview from 1920, “The whole thing is so absurd.” But he added that he had been working on “a machine or apparatus which could be operated by personalities which have passed onto another existence…” In the same interview, Edison notes that the idea of a “spirit” is useless because it has no physical manifestation. And if it has no physical manifestation, then why even bother thinking about it, as it can’t be observed. But “personalities” on the other hand, those Edison gave a particular physical definition, which was based on his encompassing theory of life.Thomas Edison holding his signature invention. Image: Flickr / cea+\nEssentially, Edison believed that there was a kind of conservation of life law (our term, not his), which states that there is a set amount of life in the universe, and it cannot be either created nor destroyed — just like the conservation of energy or mass laws in thermodynamics. He also believed that this set amount of life was broken down into “myriads and myriads of infinitesimal entities”, much in the same way matter can be broken down into atoms. From there, Edison reasoned that these “entities” gather in “swarms” and become either a human or a plant or an animal or anything we define as being alive.\nEdison proposed that the entities were too small to see, but his analogy for how to think about them was clever. He said that if you imagined a man from Mars with “courser” eyes than our ours, he may only be able to see say, the Golden Gate Bridge, but he wouldn’t be able to see the people who built it. If he destroyed the bridge, and it was rebuilt, from his point of view it would look like it had magically reassembled itself. In the same way, Edison believed that the entities that make up life cannot be seen, but are still responsible for building everything that is alive. And no, sadly, Edison didn’t give his thoughts as to what imbues these entities with their intrinsic life-building property.Edison pouring chemicals. Image: Wikimedia / Library of Congress\nAs far as our “personalities,” those Edison reasoned were particular indivisible sets of entities (groupings of life blocks) that differentiated one organism from another, and were likely to be found in the Broca area of the brain. But again, Edison made no claim that he believed there were spirits. Only that people’s distinguishing indivisible life-entity groups may exist, even after death. See, that doesn’t sound so crazy, right?\nWith that possibility in mind, Edison conceptualized a “valve” of light that would be so hypersensitive it could be adjusted by one of these indivisible personality life-entity groups in order to reveal their existence. Somehow. Edison doesn’t really get into the details in the interview, and no iterations of any type of spirit box were ever found.\nAn extremely rare recorded moment with Edison.\nThe spirit box was also intended to combat what Edison saw as a plague of moronic, unscientific attempts at communicating with the dead. “In truth, it is the crudeness of the present methods that makes me doubt the authenticity of purported communications with deceased persons,” Edison said. “Why should personalities in another existence or sphere waste their time working a little triangular piece of wood over a board with certain lettering on it? Why should such personalities play pranks with a table?”\nAnd there you have it. Edison didn’t brew up the idea of the so-called spirit box to communicate with the dead. He did it to verify possible personality clumps floating through the ether, and to get everybody to stop acting like a Ouija board does anything but provide an opportunity for people to gather together, move a piece of wood around, maybe get a little tipsy, and pretend like there are ghosts in the room. Speaking of which, happy Nerdoween!\nWhat do you think about Edison’s spirit box? Do you think his theories of life and personality could ever be scientifically verified? Give us your thoughts in the comments below!\nImages: Wikimedia / American Telephone and Telegraph Co.\nA Spirit Box comes to life in in Nerdist Presents: The Mystic Museum:\n[brightcove video_id=”5615158804001″ brightcove_account_id=”3653334524001″ brightcove_player_id=”rJs2ZD8x”]\nMore Spooky Science:\n- The science of “light as a feather, stiff as a board.”\n- What happens if the Earth stops orbiting the sun?\n- How do Ouija Boards actually work?\nWelcome to Nerdoween! Throughout the month of October, we’ll be celebrating everything spooky, macabre, and just plain weird. Nerdoween 2017 is presented by Alpha, our interactive membership service, which offers you exclusive content from Nerdist and Geek & Sundry, as well as a 10% discount on all of our merch.", "label": "No"}
+{"text": "Skip to main content\n- Box is a secure way to upload forms to our office. More information about Box Security.\n- Only submit forms in a .pdf format. Other formats will be deleted and not reviewed.\n- List an email address that you check regularly in case we need to contact you.\n- Forms requested on your financial aid to-do list on MyUSU should be satisfied the next business day after you upload them.\n- Some forms still require a wet signature or must be delivered in-person, etc. We will attempt to contact you if we cannot accept an uploaded form.\n- Notarized forms cannot be uploaded to Box, please mail them instead.\n- Please allow 1 business day for receipt and 1-2 weeks for processing.\n- Contact USU Financial Aid if you have any questions about your upload.", "label": "No"}
+{"text": "The North Face Women's Freedomlight Short - 5\"\nBe free do run, bike, and hike in the Freedomlight Short. 100% recycled material with FlashDry™ technology to cool and comfortable.\n- Moisture-wicking FlashDry™ helps keep you cool and dry\n- Pull-on, encased-elastic waistband with an internal drawcord\n- Side panel with a piping detail\n- Heat transfer logo on left hem\n- 5\" inseam\n- Standard fit\n- Materials: 75D 88 g/m² 100% recycled polyester plain weave with FlashDry™\n- Style No. A7UIJ\nPayment & Security\nYour payment information is processed securely. We do not store credit card details nor have access to your credit card information.\n- Opens in a new window.", "label": "No"}
+{"text": "When writing this guide, we reached out to the marketer community to collect case studies and learnings about creative marketing strategies. Most of these examples are included throughout the guide, but some didn’t quite fit. So we included those loose ends here, from the perspective of four awesome marketers. What better way to wrap up this guide than with you, our community?\nIndia Hicks – Featured in Forbes, InStyle, Yahoo, and Business Insider, India Hicks is a social selling company that sells high-end handbags, clothing, accessories, beauty and fine fragrances designed by India and her team. Become an India Hicks Ambassador for as little as $99. Ambassadors earn up to 30 percent commission on sales. Ambassadors also earn 10 percent product credit every month they are active.\nSome moms don't want to play the \"parent card,\" admitting to clients that a finicky child is preventing them from meeting a deadline. In that case, it may be best to keep the fact that you're working from home out of the conversation completely. Give your child a nonverbal \"Do not disturb\" when you need quiet time. Perhaps you could wear a tiara when you're on the phone to signify that kids are not allowed to make noise or interrupt -- unless there's an emergency. If you have an office door, tie a red ribbon on it when you're not to be bothered. This tactic is best for older kids; toddlers won't understand that they can't always have your undivided attention.\n“Straight North has done an excellent job. We’re very satisfied. They give us great reporting. We get full data on cost per lead for the various channels. Our website identity has received many compliments. We’re extremely happy with the level of contact we have with them. They’re very responsive to our needs. The overall service level has been very high.”\nIn most cases, creating something (doing your business) will benefit you more than consuming great content from others. Sure you have to be on track and get new insights but I am aware that one must really limit that consumption. I am constantly consuming new content but I guess right now I could sit down and write 100 articles with the content that is already in my head.\nBecoming a part of an affiliate network is an excellent strategy for bloggers looking to up their current income or even just to begin actually making money from their blog. There are several options when it comes to affiliate marketing as well as strategies for making affiliate marketing work for you. Below I will teach you what is affiliate marketing, examples of affiliate marketing in blogging, affiliate strategies and some of the top affiliate networks to join.\nThis week, we talk to a man who describes himself as “unable since birth to settle for how things should be.” He’s a proud dad, a husband, and an online entrepreneur who loves creating, marketing, and selling cool things online. And he’s learned that simplicity and depth are the keys to consistently working on what matters so you can make the impact you desire.\nAs an internationally recognized Search Engine Marketing agency, we have the team, technology, and skills to manage large budget PPC campaigns with thousands of keywords. We have the ability to manage enterprise level accounts in multiple languages. IMI is also partner with Marin Software to provide our clients with the best possible advertising management platform, reporting dashboard, attribution modeling, and reporting.\nTo cease opportunity, the firm should summarize their current customers' personas and purchase journey from this they are able to deduce their digital marketing capability. This means they need to form a clear picture of where they are currently and how many resources they can allocate for their digital marketing strategy i.e. labour, time etc. By summarizing the purchase journey, they can also recognise gaps and growth for future marketing opportunities that will either meet objectives or propose new objectives and increase profit.\nThe next step once you then have that great product is understanding the fundamentals of marketing in the modern age. That great product that you have still is going to have to find a market, and that market is going to have to be compelled into taking action. That’s why we’re going to be talking about, in these future episodes, elements of the modern marketing website.\nFor most businesses, a website is a great piece of marketing material to generate more calls, leads, referrals, and new customers—acting as a virtual sales rep: 24 hours a day, seven days a week. If your website is outdated, doesn’t convert visitors into leads, or simply isn’t up to your satisfaction, you need professional website design services. Blue Corona is a web design company with an in-house team of digital designers specializing in designing and building responsive websites that look beautiful across all devices, including smartphones, tablets, laptops, and desktops, and is here to help you generate more leads and sales from your website.\nI’m a former lawyer turned entrepreneur with Rodan+Fields (makers of ProActiv, the acne system). After welcoming my twin girls, I decided traveling, long hours, and dial-ins were no longer for me. I wanted to work from home on a part-time basis and Rodan+Fields has allowed me to do that. If you’re interested in earning a solid part-time income on your own terms, I’d love to talk to you!\nIf you ever dreamed of opening a retail store, that doesn't have to be put on hold because you're a stay-at-mom. The Internet has made it possible to sell products from any location, including your house. The United States Postal Service even offers Carrier Pickup services that will pick your packages at your house making it simple to run a retail business from home. Your children can even help out with the work from home business by packing orders and getting them ready to mail.\nAccording to the U.S. Bureau of Labor, approximately 21% of employees work from home on an average day. I’m sure a significant proportion of these people are mothers who are taking care of their children simultaneously. It can be hard to juggle so many responsibilities, but the key to making it work is finding a job with the perfect fit – one that has built-in flexibility, reasonable compensation and engages all of your greatest strengths.\nCambly is an online, foreign language, tutoring platform that lets individuals practice their language skills with a native speaker. Online tutors make 17 cents per minute ($10.20 per hour) talking to paying Cambly users. To get started, you must be a native English or Spanish speaker; you must have a webcam and Internet connection. Payments are made via PayPal.\nWhether you’re looking to jumpstart a new career or take your current skills up a notch, the Marketing, SEO & Affiliate Marketing Super Bundle will give you the tools you need to become a digital marketing pro. With nine jam-packed courses and 57 hours of instruction, you’ll be well-versed in the top marketing tools and skills of 2019, including Facebook Ads, Google AdWords, MailChimp and more. Here's what's included:\nThe amount of services that can be done from your own home is unlimited. Review your personal and professional talents, and interests to determine if any can be turned into a service that you can provide virtually. Some service ideas include writing, editing, and proofreading, reviewing legal documents, bookkeeping, graphic design, virtual support, and more. In fact, in many cases you can take duties you did in a job and turn it into a home business. You can focus on offering services to the general public (B2C), such as tutoring, or to other businesses (B2B), such as web design or marketing.\nHer other kid-centric tips: Set aside a few cool toys that your kids can play with, or arrange playdates or special movie viewings only during \"Mommy's work time.\" If your children have something to look forward to, they'll be less likely to interrupt you. You can also try setting up an activity center in your home office so kids feel as if they have their own designated place to do projects while you catch up on e-mails. If their interest in that fails, create a \"boredom bowl,\" suggests Durst.\nWhat do you think you could honestly sell customers in the hopes that it would improve their day-to-day? For example, maybe you renovate homes and are always looking for the highest-quality paints or most eco-friendly cleaning solutions for bathrooms and kitchens. If you’re already knowledgeable about a market and have interest in it, that’s a great place to start.\nJerod Morris: To kick the discussion off, you and I exchanged a few thoughts on an article that we read. It’s a ZDNet article that was talking about some research that Accenture did that basically found that new and emerging technology has the potential to help create up to 10 million new jobs for young people as entrepreneurs around the world step into the role of ‘digital entrepreneur.’\nDirect Sales— This is one of the most common ways of making money for stay-at-home moms. Direct selling is simply selling another person’s product or service to receive a percentage of the sale (commission). This has enormous potential, and can easily help you earn money online. A word of caution though — before you join any business opportunity, investigate the company, make sure the product is available and reliable, and ensure you have a good knack for selling. Stella & Dot is one of my favorite direct sales opportunities.\nWhat It Is: \"So many jobs that were reserved for a corporate setting you can now do at home, like IT troubleshooting,\" Shagara says. In this role you'll use problem-solving skills to diagnose technical problems and walk clients through solutions. A company may also want you to be a point of reference for new software or hardware installment and repair.\nIf her kids ever felt like they had nothing to do, she'd tell them to choose a slip of paper from the dish. Some instructed them to build the tallest Lego tower, others told them to clean their room. When they got older, she'd include them in her work by asking them to put away files. \"You need to have an open-door policy and involve them in any capacity they can handle,\" she says.\nAnother real challenge of WAHM-hood for me was the loneliness. I used to walk around stores just to chat with clerks for a break from baby babble. Luthar says that women with young children—especially those working from home—need to connect with people for their well-being. She suggests parent support groups, including virtual ones, like her Authentic Connections program. “Moms are not like the Energizer Bunny, an endless well that stays filled without replenishment,” she says.\nIt’s not all bad, of course. I never have to miss anything my kids are a part of, and I do get to enjoy a lot of time with my little people. I have been forced to learn to compartmentalize my time and set clear boundaries, which is a good thing. I have had to learn not to feel guilty for working in front of my kids, though admittedly I still struggle with that sometimes. My husband more than pulls his own weight, so overall, the benefits outweigh the challenges.\n“Through our global affiliate network, we empower marketers to engage shoppers across the entire consumer journey. Affiliate success comes down to partnerships — we connect advertisers with publishers to reach new audiences and influence repeat purchases. Our solutions create a holistic strategy that delivers proven incremental revenue and is continually optimized for performance,” its website reads.\nNowadays, people seeking skills and knowledge for their jobs – without needing the official qualification – have many other options. Online programmes with top tier academic institutions let people take just the courses they need, through providers such as Coursera and LearnDigital. This option fits in easily with the pressure of starting a business or an existing job.\nThis is different to the traditional static website user experience, which requires users to reload pages to take action, such as submitting a review. Such a scenario may seem like a minor inconvenience, but it creates a speedbump for customers that will cause some of them to bounce from the page, meaning you lose out on potential conversions. Micro-interactions help level out these speed bumps and provide users with richer interactions.\nAccelerated Mobile Pages (AMP) are also becoming more important. If you haven’t already heard about AMP, it’s an open-source coding standard for publishers that allows them to load their sites quickly on mobile. Traditional mobile websites can be a bit clunky, but AMP ramps up the mobile experience by stripping down code, using external resources for media files and running scripts in parallel to allow pages to load instantly.\nDon’t put all your eggs in one basket. If you only promote one merchant’s products, you are stuck with their commissions, their landing pages, and ultimately, their conversion rates. It is important to work with many different merchants in your niche and promote a wide range of products. This affiliate marketing strategy will diversify the amount of commissions you make and create a steady stream of revenue when building an affiliate website.\nSell Products You Love. – I have never been a sales type of person, however, I can tell my friends the things I love to shop for. Companies like Stella & Dot (which has such cute jewelry) enable women to get a business of the ground really fast. (Bonus: if you sign up with Stella & Dot with our affiliate link, you’ll get $350 in free accessories.) Do you want to be a Style Boss? Learn more.\nRakuten helps you handle it all. It offers influencer campaign management that aids in influencer recruitment with detailed reporting and campaign insights that can spur users into action. It offers blogger and client networking to help professionals further build up their networks. Rakuten is trusted by brands such as Best Buy, Macy’s, Walmart, ecco, Dialogtech, and more.\nThe problem with affiliate marketing, like many other home business options, are the so-called gurus and get-rich-quick programs that suggest affiliate marketing can be done fast and with little effort. Odds are you've read claims of affiliate marketing programs that say you can make hundreds of thousands of dollars a month doing almost nothing (\"Three clicks to rich!\"). Or, they suggest you can set up your affiliate site, and then forget it, except to check your bank deposits.\nMurphy has grown the affiliate channel to represent 11 percent of her overall revenue. She hopes that she will be able to grow that number to 20 percent. What she likes most about the affiliate channel is that it is performance based — instead of paying for ad placements and hoping that they work, she pays a 12 percent commission on actual sales generated. The program tracks sales based on a 365-day cookie, which means that affiliates earn commissions on repeat purchases that occur within one year of the initial referral.\nTwo-tier programs exist in the minority of affiliate programs; most are simply one-tier. Referral programs beyond two-tier resemble multi-level marketing (MLM) or network marketing but are different: Multi-level marketing (MLM) or network marketing associations tend to have more complex commission requirements/qualifications than standard affiliate programs.\nDesigned to create a huge amount of traffic at all times, these sites focus on building an audience of millions. These websites promote products to their massive audience through the use of banners and contextual affiliate links. This method offers superior exposure and improves conversion rates, resulting in a top-notch revenue for both the seller and the affiliate.\nThis is a very interesting focal point when thinking about entrepreneurship and the types of startups being created. You guys are in a great position to mentor others on the digital product/service ecosystem. I like where you are headed and look forward to hearing more. If you are looking for a unique industry disrupting Saas company to interview I have just the people to connect you with.\nI am a STAM working 3 jobs… all part time and from home… (can u believe it?) But really, I started with the mystery shopping, and that was OK. The positive was you get paid, the challenge was not frequently and sometimes needed to wait a month for payment to be transferred to the paypal account. Then I became and infant massage teacher and love this. REDTENTSALE is my Ebay store, I sell so many various items I find from wholesellers and it’s nice, I do this when the kids are asleep; anyone can… very manageable and nice “but light” income. I would say the one by far that is taking me places is Real Estate Marketing.\nI am an ESL teacher for VIPKid and I love it! I can work as much or as little as I like depending on what I have going on each week. The curriculum is already made by the company and the kids are eager to learn. All you need is a bachelor’s degree. Any kind of experience working with kids is great too. It was an answer to my prayers when I found this job last year and I feel so great being able to make money and be at home with my kids.\nInternet marketing is THE portable business in the millennial era. Internet marketing gives the tech pro or SEO blogger the freedom to work anywhere in the world. Internet marketing has become the lifeblood of many businesses from startups, to small publishers and professional advisors (like mine), to multinationals, marketing dollars are moving towards the web.\nAlice’s Table empowers women to start their own flower arranging events businesses in their communities. Alice’s Table provides the ongoing training, and support women need to launch their businesses, and connects them to a community of hosts across the country. The Alice’s Table host program prioritizes living well and working hard — giving women the opportunity to create a career for themselves that is flexible and creative, while also challenging, sustainable and inspiring. With Alice’s Table, you take home up to 70% of ticket sales (before the cost of flowers) and can earn up to $600 per two-hour event (depending on the size of the event). You also have the opportunity to earn mentoring bonuses. Click here to apply and mention you saw us on The Work at Home Woman.\nSince you are reading this article, that means you have a skill that many people around the world are seeking – knowing the English language. Learning to read, write, and speak English has become an invaluable asset in industries based in the U.S. or that are global. Specialty websites and local resources can connect you with people looking for an English teacher to learn from and converse with.\nGoing to work may be the way many women make a living, but if staying home to work sounds good to you, you're not alone: About 21 percent of employed adults did some or all of their job at home, according to the U.S. Bureau of Labor Statistics. Considering becoming a work-at-home mom (WAHM) yourself? First, heed the advice of moms and experts who have learned the best ways to navigate life at the intersection of WAHM-ing and Mom-ing.\nTeleReach offers telephone marketing services. This company hires home-based positions in appointment setting, lead generation, information gathering, seminar reservations, website marketing, product introductions, trade show follow-up, direct mail follow-up, prospect education, script development, list development, list updating, database sourcing, list merging, prospect, identification, tracking reports, prospect feedback and program evaluation.\nIn the 1990s, the term Digital Marketing was first coined,. With the debut of server/client architecture and the popularity of personal computers, the Customer Relationship Management (CRM) applications became a significant part of marketing technology. Fierce competition forced vendors to include more service into their software, for example, marketing, sales and service applications. Marketers were also able to own huge online customer data by eCRM software after the Internet was born. Companies could update the data of customer needs and obtain the priorities of their experience. This led to the first clickable banner ad being going live in 1994, which was the \"You Will\" campaign by AT&T and over the first four months of it going live, 44% of all people who saw it clicked on the ad.\nThe concept of affiliate marketing on the Internet was conceived of, put into practice and patented by William J. Tobin, the founder of PC Flowers & Gifts. Launched on the Prodigy Network in 1989, PC Flowers & Gifts remained on the service until 1996. By 1993, PC Flowers & Gifts generated sales in excess of $6 million per year on the Prodigy service. In 1998, PC Flowers and Gifts developed the business model of paying a commission on sales to the Prodigy Network.\nSymbria provides programs, services, and tools to post-acute care providers, including skilled nursing, assisted living, independent living, outpatient, and home health. They occasionally hire data entry clerks to input prescription information; search for the positions “Pharmacy Technician Specialist” or “Prescription Entry Clerk”. Symbria is an employee-owned company.\nAs a front-end engineer, you’ll aid in the development of solutions that support consistent information architecture, taxonomies, visual standards, interaction patterns and use cases across multiple applications. In addition to reviewing designs and documenting front-end technical specifications, you’ll provide time estimates for the implementation of features/fixes. To land this full-time work-from-home job, you should have five-plus years of professional work experience as a user-interface developer of Rich Internet Applications, as well as experience coding rich, immersive interfaces using HTML5.\nAre you looking for a challenging and rewarding career with the top online marketing company in the USA? At Straight North, our team members are our greatest resources, and we grow our team by hiring top performers. If you’re interested, please take a look at our current career openings and send us your resume. We’re always looking for talented people to join our growing company!\nSellHealth — SellHealth is a health affiliate network. It’s free for affiliates to join, should their applications be accepted. All of SellHealth’s sales are made through company-owned websites, meaning affiliates don’t need to facilitate sales on their own sites. This eliminates the possibility of error and increases consumer trust, as they are sent to a legitimate brand site to complete their purchases.", "label": "No"}
+{"text": "Local Service Call for GSE\nOur technicians are trained to work on electrical, mechanical, and hydraulic systems on any ground support equipment.\nService is available in Miami-dade, Broward, Palm Beach, Monroe, and Collier counties.\nBook the day and time you need the service, we will confirm the spot via email.\nPlease state in the order notes at check out what equipment we are going to be working on and a brief description of the problem.\nTwo hours minimum and eight hours maximum per booking.\nIf you prefer to have a remote session, visit our remote assistance page.", "label": "No"}
+{"text": "Why Isn’t Anyone Talking About the Real Story Behind Monica Crowley’s New Job\nFALLOUT: Longtime Hillary Loyalist Doug Schoen RETHINKING #ImWithHer in Light of FBI Investigation!\nPOLITICO: Chuck Schumer’s courageous vote will save Democrats\nObama – Shake Up in the White House\nIn (some) defense of Doug Schoen\nKeeping up the pressure – Ending Federal Funding of NPR and The Corporation for Public Broadcasting: A Taxpayer funded voice of the Left.\nJudge Denied Restraining Order Against Gunman Who Shot Five People in Maryland Today\nThe Dirty Little Asterisk to Trump’s Nominations Swipe: Crony Obstructionism\nCalifornia Governor Jerry Brown Suddenly Seems a Lot Like Betsy DeVos\nCopyright RedState.com. All Rights Reserved. Terms under which this service is provided to you", "label": "No"}
+{"text": "Weekly Sports League and Franchise Report\nby Dan Krieger\nNovember 23, 2020 - ECHL (ECHL)\nPacific Coast League: Major League Baseball's Houston Astros announced they have dropped the Round Rock (TX) Express as their Triple-A Pacific Coast League affiliate and will make the suburban Houston area's Sugar Land Skeeters team, which has been the lone western team in the unaffiliated independent Atlantic League since the 2012 season, their new Triple-A affiliate starting with the 2021 season. The Round Rock Express played five seasons (2000-04) as a Double-A Texas League team before moving up to the Triple-A level for the 2005 season. Round Rock is expected to get a new MLB affiliate as part of the reorganization of Minor League Baseball for the 2021 season.\nInternational League: After losing its affiliation with Major League Baseball's Minnesota Twins last week, the Rochester (NY) Red Wings of the Triple-A International League were announced this week as the new Triple-A affiliate of MLB's Washington Nationals. The Nationals had been the parent club for the Fresno Grizzlies of the Triple-A Pacific Coast League. The Grizzlies could be moved down a couple levels to the low Class-A California League, which is reported to be switching from a high Class-A league.\nAmerican Girls Baseball: A former player in the All-American Girls Professional Baseball League, which operated for 12 seasons (1943-54), is trying to establish a new women's baseball league in Southwest Florida that could utilize unused baseball complexes from October through December.\nWest Coast League: After cancelling its 2020 season due to the coronavirus (COVID-19) pandemic, the summer-collegiate WCL announced its schedule for 2021 that will feature 15 teams with the addition of 3 expansion teams called the Nanaimo NightOwls (British Columbia), Kamloops NorthPaws (British Columbia) and Edmonton Riverhawks (Alberta).\nExpedition League: The summer-collegiate Expedition League announced a new team called the Canyon County Spuds, based in Caldwell (ID) about 25 miles west of Boise, has joined the league for the 2021 season. The Casper (WY) Horseheads announced they will return in 2021 after sitting out the 2020 season.\nNational Basketball Association: Due to travel restrictions imposed by the Canadian government as a result of the coronavirus (COVID-19) pandemic, the NBA's Toronto Raptors will start the 2020-21 season playing its home games in Tampa's Amalie Arena, home of the National Hockey League's Tampa Bay Lightning. The NHL Florida Panthers' arena in Sunrise (Fort Lauderdale) was also considered and Newark, Nashville, Kansas City (MO) and Louisville had expressed interest in hosting the Raptors.\nThe Basketball League: As the minor professional TBL moves toward its goal of 32 teams, the league announced it will soon announce its 31st team to be based in the Pacific Northwest. This team will join the region's previously announced Portland (OR) Storm.\nCanadian Football League: After cancelling its entire 2020 season due to the coronavirus (COVID-19) pandemic, the nine-team CFL announced a 2021 \"Comeback\" regular-season schedule that will run from June 10 through October 30, 2021.\nIndoor Football League: The IFL announced its 2021 season schedule that will feature 12 teams each playing a 16-game schedule from April 2 to July 24. The IFL added three new teams called the Louisville Xtreme, Massachusetts Pirates (Worcester) and Northern Arizona Wranglers (Prescott Valley) for its 13th season in 2021. Five of the league's 17 teams are not playing in 2021: the previously announced 2022 Columbus (OH) Wild Dogs expansion team and four teams from last season called the Quad City Steamwheelers, San Diego Strike Force, Oakland Panthers, and Cedar Rapids River Kings that decided not to play in 2021.\nFan Controlled Football: The proposed new fan-interactive FCF, which plans to be the first fan-controlled professional sports league with fans electronically calling plays, recently announced the fan-selected nicknames for the league's four teams are the Glacier Boyz, Beasts, Zappers and Wild Aces. The FCF plans to start its inaugural season in mid-February 2021 with four games of indoor 7-on7 football played at one location.\nECHL: The six teams in the ECHL's North Division â the Newfoundland Growlers (St. John's), Reading Royals, Brampton Beast (Ontario), Maine Mariners (Portland), Adirondack Thunder (Glens Falls, NY) and Worcester (MA) Railers â have decided to voluntarily opt out of participating in a 2020-21 season due to the effects of the coronavirus (COVID-19) pandemic and potential travel restrictions with Canadian teams in Brampton and Newfoundland. All six teams are expected to return for the 2021-22 season. The 26-team ECHL was to play the season with 13 teams starting next month and the rest starting in January 2021. The league's Atlanta Gladiators and Norfolk Admirals previously announced they would voluntarily sit out the 2020-21 season and the ECHL reportedly has a November 30 deadline for final commitments from teams.\nFederal Prospects Hockey League: After playing two seasons (2018-20) in the FPHL, the league's Mentor (OH) Ice Breakers team has decided to fold due to the uncertainty of a 2020-21 season and the prospect of limited fan attendance. The FPHL is now down to nine possible teams for the 2020-21 season, since the Delaware Thunder (Harrington) and the expansion Motor City Rockers (Fraser, MI) previously announced they would sit out the 2020-21 season. The FPHL also announced it has pushed back the start of its 2020-21 season from December 18 to no earlier than January 15, 2021.\n3ICE Hockey: The new 3ICE independent three-on-three professional ice hockey league announced the dates for its inaugural 2021 season that will feature eight teams playing weekend tour events in nine cities in the United States and Canada. The eight weekly tour events will run from June 20 to August 7, 2021 followed by a ninth week of playoffs on August 21. The league has narrowed the list of potential cities to 13: Boston, Buffalo, Las Vegas, Nashville, Minneapolis, Columbus, Pittsburgh, Toronto, Montreal, Quebec City, Hershey (PA), Grand Rapids (MI) and Providence (RI).\nMajor League Soccer: The Houston Dynamo of the MLS announced a slight change of its name to the Houston Dynamo Football Club, or Houston Dynamo FC, which is now considered more of a football club than a team. The organization owns the Dynamo, the Houston Dash of the National Women's Soccer League and regional youth affiliates.\nNational Women's Soccer League: Due to potential challenges from the coronavirus (COVID-19) pandemic, the professional NWSL announced it will start its 2021 season in mid-April with a month-long Challenge Cup competition, similar to the one utilized in the delayed start of the 2020 season. This will take place in multiple bubble environments, team markets or a combination of the two. The 2021 NWSL regular season will then start in mid-May with each team playing a 24-game schedule. The NWSL's 2022 Los Angeles-based expansion team called the Angel City FC announced it will play home games at the Banc of California Stadium, which is home to Major League Soccer's Los Angeles FC.\nWomen's Premier Soccer League: The elite-level WPSL announced the Westchester United FC (New York) has been added as a 2021 expansion team. The LA Galaxy OC, which won the 2019 championship of United Women's Soccer, has left the UWS and will join the WPSL as the rebranded SoCal Reds FC for the 2021 season.\nNational Lacrosse League: The indoor professional NLL's new Fort Worth expansion team announced it will be called the Panther City Lacrosse Club when it starts play in November 2021 for the 2021-22 season. Panther City will be the league's 14th team.\nMajor League Cricket: The proposed new professional MLC is working with the Dallas-Fort Worth suburb of Grand Prairie to redesign AirHogs Stadium for a Texas-based MLC franchise when the league starta play in 2022. The stadium had been home to the Texas AirHogs baseball team that recently dropped out of the independent American Association, As the MLC develops, it started Minor League Cricket (MiLC), which played some exhibition games this year. The MLC and MiLC each list 24 potential teams.\nDan Krieger is the creator of the Weekly Sports League & Franchise Report, which has been tracking changes in the sports world's leagues, teams and nicknames since April 2007.\n• Discuss this story on the ECHL message board...\nECHL Stories from November 23, 2020\n- SC Adds Goalie Alex Dubeau to 2020-21 Roster - South Carolina Stingrays\n- Details for \"Black and White Intrasquad Game\" Announced - Rapid City Rush\n- Solar Bears Sign Aaron Luchuk - Orlando Solar Bears\n- Stingrays Single Game Tickets on Sale Now - South Carolina Stingrays\n- Drive Through Teddy Bear Toss with the Mariners December 5 - Maine Mariners\n- Weekly Sports League and Franchise Report - OSC Original by Dan Krieger\nThe opinions expressed in this article are those of the writer(s), and do not necessarily reflect the thoughts or opinions of OurSports Central or its staff.", "label": "No"}
+{"text": "With an adventurous menu that shines a spotlight on local, organic produce, renowned chef and hospitality consultant Lucas Parkinson’s new Piha venture is well worthy of your attention this summer. Taking over the former site of The Piha Cafe (historically home to Piha’s post office), Aryeh, pronounced ‘Ari-aye’, opens its doors this Saturday, bringing an exceptional fine dining experience to the iconic coastal spot. The eatery is nestled into the bush-clad hillside, and boasts an enviable perspective of the beach and, from the outdoor area, Te Piha.\nUnsurprisingly, given Parkinson’s resume, the menu is elevated, inventive and delicious. The chef, perhaps best known for his award-winning, Wānaka restaurant Ode (earning one hat, and arguably the country’s most sustainable high-end restaurant during its five-year residence), describes nature as the executive chef of Aryeh.\nNature, he says, dictates what’s on the menu and when. Dishes are guided entirely by Aotearoa’s produce and, as such, will change with and throughout the seasons. Taking great care in selecting wild proteins, sustainably sourced kaimoana, and cultivated goods that are procured with consideration for the environment and the welfare of animals is a non-negotiable for Parkinson, and the menu acts as an exploration of our local landscape.\nThe debut dishes, available this coming weekend, see the likes of sashimi paired with ponzu granita, finger lime, sunflower and kelp emulsion, and fig leaf sushi rice shard, and organic Cambridge Mapari beef topped with three-day Stonecroft syrah bone jus and five-year-aged balsamic. On the side, diners will delight in Piha honey-roasted young carrots with puffed Taranaki quinoa and a Piha herb gremolata, or crunchy jersey bennes fried in beef fat, served with Piha oyster mushroom and black garlic mayo. And when it comes to dessert, summery Kumeu Strawberry and Cambridge cream panna cotta with strawberry sorbet, fresh strawberries and aerated strawberry milkshake is a must try, while the Far North macadamia crumble with strawberry meringue and young purple basil is equally as divine.\nIf it’s a glimpse into the process and Parkinson’s craft that piques your interest, on Wednesday nights diners are offered a front-row seat to the action at Aryeh’s test kitchen experience, where an $89 five-course menu comes with a notepad and pen to leave feedback, which Parkinson assures us will be treasured by the kitchen team.\nAnyone that frequents Piha in the summer months will know of the iconic address, and as soon as Parkinson spotted it vacant he jumped at the opportunity, taking Aryeh from concept to fruition in just eight short weeks. Inside, a vast Neolith Phedra stone chef’s table anchors the space, accompanied by an open kitchen, a spectacular Atlantic greenstone bar, and hardy wooden tables throughout. There’s space for an intimate group at the chef’s counter, a handful of tables on the covered balcony, and the most coveted spot of all, a carefully laid out sun deck — an outdoor oasis with an exceptional outlook, shaded by sprawling umbrellas.\nThis Sun Deck space invites walk-ins only, and as such, has a more casual offering — Parkinson’s take on traditional, casual seaside fare. Here, by-the-kilo pots of Coromandel mussels, fish and chips with light nitrous-whipped lemon aioli, and organic chicken wings with moreish horopito buffalo sauce all feature.\nAs for the drinks, an important consideration given the location, diners will be pleased to discover that the all-New Zealand mantra is upheld. You’ll find a focus on organic and biodynamic wines, a vibrant list of beer, and cocktails (both with and without the booze) based on fresh, cold-pressed fruits. There’s the option to wine match with all menus, too.\nAryeh’s concept is unique in that the eatery will welcome guests throughout summer, until the end of April when it ‘winters-down’, giving over its space for events, collaborations and pop-ups, before reopening for the next summer chapter in December.\nWith Parkinson’s exceptional fare paired with Aryeh’s location in one of the most iconic and breathtaking spots in the country, Aryeh is perfectly positioned to become the place to be this summer and beyond.\nDinner: Wednesday to Monday — 5.00pm till 9.00pm\nLunch: Thursday to Monday — 12.00pm till 2.00pm\n20 Seaview Road,", "label": "No"}
+{"text": "Happy Monday my friends – I am writing to you in my pj’s this morning as I have the day off from work today. Is there anything lovelier that waking up on a Monday morning without your alarm screaming at you, knowing that the only commute you have to make is flipping from one side of the bed to the other, settle in, and drift back into a peaceful sleep?\nI spent this past weekend in Windsor, Ontario for a fun-time family reunion, so of course I had to take Monday off so I could recuperate. 😛 My brother and I drove down with my mom and dad to visit with grandparents, aunts, uncles, cousins, cousins and more cousins! It was a great time, which included lots of food (of course – with my family, that’s how we roll).\nI wish I could say I totally behaved myself this weekend. I was doing just fine, counting my points, really thinking about what I was putting in my mouth, but somewhere around Saturday night I started to fall off the rails a little bit. Going away means a lot of eating out and I don’t know why, but somehow leaving the immediate vicinity of my home send off bells in my brain that says “YOU ARE AWAY FROM HOME…YOU NEED COMFORT…EAT EVERYTHING!\nI decided when I got home last night that I would do a little “reset” today. I got to bed early last night and got enough sleep, woke up today and had some water, ate a good breakfast, and took my vitamins. So now I’ve set myself up for a good day, and even a good week. Weather pending, I will get out and go for a walk today.\nI didn’t write my normal Wednesday blog last week, but I did go to my weigh-in and my weight stayed the same. I wasn’t completely happy with that, but I wasn’t really unhappy either. There are going to be weeks that don’t go my way, it just means I going to have to step things up and try harder the next week. And the week after that, and the week after that…\nA little side note:\nLast week my Uncle Al passed away. He was my grandmother’s brother and I remember him as being just the sweetest, warmest, funniest man. We didn’t see each other often, but when we did he always took the time to check in with me. When I started my first full-time job working for a bank, he used to ask me how things were going and give me advice on being a good employee, and how to work my way up. I never forgot that. I have come a long way in my career since then and I think I owe a little bit of that to Uncle Al. Rest in peace, Sir, you will be missed.", "label": "No"}
+{"text": "If you do, things get better. A lot better.\nThe world today is a horror story. Fires, floods, and flagrant social fouls are only ratcheting up anger and hate.\nWe read and watch these events as if they matter. The truth is, for most of us, they don’t.", "label": "No"}
+{"text": "you are viewing\nCOYLE JAM BANDS\nLooking to book a band like Grateful Dead or Phish so that guests can kick back and enjoy great music all day long? You’re in the right place! GigMasters has plenty of fun Jam Bands available for bookings in the Coyle, OK area. Pick out your favorite today.\nPlease note these Jam Bands\nwill also travel to Langston, Meridian, Tryon, Guthrie, Perkins, Carney, Mulhall, Arcadia, Stillwater, Wellston, Luther, Warwick, Orlando, Agra, Ripley, Crescent, Edmond, Chandler, Jones, Marshall, Cushing, Perry, Cashion, Glencoe, Spencer, Harrah, Lucien, Nicoma Park, Davenport, Morrison", "label": "No"}
+{"text": "You rocked with the Jonas Brothers; you danced with the Wildcats, now discover ALICE UPSIDE DOWN. Featuring stars of Camp Rock and High School Musical, ALICE UPSIDE DOWN is a sure fire hit for pre-teen girls everywhere! Set for DVD release on 18 May 2009 courtesy of Momentum Pictures, you couldnt find a more family friendly film that is pure entertainment from start to finish.\nALICE UPSIDE DOWN is also genuinely tender and appealing in its tale of a typical young girl who is getting ready to leave her childhood behind. In her imagination, Alice is cool, confident and popular, but in reality, she feels like she cant do anything right. Starring Alyson Stoner (Camp Rock, Cheaper by the Dozen, Disneys Suite Life of Zack and Cody), Lucas Grabeel (High School Musical, Legend of the Dancing Ninja) and Luke Perry (Beverley Hills 90210, 8 Seconds, Buffy the Vampire Slayer), ALICE UPSIDE DOWN is both hilarious and poignant as we follow Alices journey from tweenship to teenship!", "label": "No"}
+{"text": "Interview by Devin Yingling, Communications Fellow at the Student Press Law Center. This interview has been edited for length and clarity.\nStudent journalists are instrumental in telling important — and often untold — stories for their communities. In the Student Press Law Center’s series, Behind the Story, we highlight examples of bold journalism done by high school and college student journalists across the country.\nSPLC spoke with student journalists Dani Klein and Ethan Schenker from The Black & White newspaper at Walt Whitman High School, Maryland. Schenker, Online Editor-in-Chief, and Klein, Feature Writer, shared what it was like putting together Klein’s story, “‘It’s getting closer and closer’: Debate team takes stock after students’ antisemitic comments on club trip.”\nKlein reported a series of stories about the uptick in antisemitic incidents in Whitman’s community and this piece specifically investigated an incident when two students on Whitman’s Debate team allegedly made a series of antisemitic comments about their Jewish teammates during an off-campus team trip.\nIn the process of finalizing the story, The Black & White connected with SPLC’s free legal hotline where they received a pre-publication review of the piece.\nDid you know? If you’ve been working on a long-term, investigative, sensitive or controversial story, SPLC attorneys can provide a free pre-publication review to flag any potential legal problems or risks. We’ll walk you through the best practices to avoid libel and other pitfalls. Just contact the hotline.\nDevin Yingling: The Washington Post first picked up this story about this antisemitic incident on the Debate team. Dani, how did that influence and inform the way you went into the reporting process?\nDani Klein: The story being reported on by the Washington Post was definitely like the go button for that story. As high school usually works, sometimes there are rumors going around about things that we would report on but we can’t substantiate them. But when something like the Washington Post is talking about something, then we feel like we’re absolutely within our bounds and actually within our responsibility to search and go a lot deeper as we are able to because we actually go to this school. So that was like the catalyst for okay, now we need to really cover this from the angle of Whitman High School.\nIt also really affected the culture around the story because it wasn’t like the people that we were talking to didn’t know about the Post’s story. Administrators, students, everyone kind of heard about the Washington Post coverage, so people all had their places they were coming from and it made staff members actually a lot more cautious because they already knew there was a lot of light being shined on the school.\nDY: Your staff had been covering antisemitic issues around your school for a bit before this story, so how did that play into how this story came about?\nDK: Ethan worked with me on all of those stories, but I did happen to cover pretty much all of the news stories that we were doing on antisemitism. The very first thing was there was a nearby community area that was defaced with antisemitic graffiti, and I covered that along with a fellow writer in terms of talking about antisemitism in the community and how it feels like it’s getting closer and getting more common. And then, I guess it was about a few weeks later that there was actually graffiti on our own school sign which I wrote the news story for. That was very jarring. Before and after those incidents, there was a lot of content from our school-wide social justice initiative that we have about antisemitism. From there, it kind of was natural that I would cover the Debate story as well because it had now become unfortunately a trend in our school in our community that there was a lot of antisemitism coverage.\nIt was just really weird and uncomfortable to be a member of a community that we don’t expect to have these huge waves of hate. It’s not one of those things that people here are super ignorant about. It was definitely really uncomfortable to have to cover so many events going on in such rapid succession in one year against one group.\nDY: At the bottom of your story, you have the disclaimers about staff involvement with Debate and Speech. As members of the school community and having these different interests and activities you’re a part of, how did you navigate being a reporter and a part of those groups as well?\nEthan Schenker: In journalism, we all recognize that how we hear things is very important because to be reliable student journalists, ideally you’re able to delineate when you’re hearing things and getting information as a reporter. You can’t break the news you hear in passing in the hall, someone whispering something in the other person’s ear, and this story kind of started out like that because we’d heard bits and pieces of it.\nI did Debate from freshman through junior year, and I just became a lot more involved with The Black & White. I was going to actually go to a Debate tournament in January. And when I heard about this happening, I was just like, no, I’m not going to pay dues this year, I’m not doing that, I need to stay as far away as possible. And I think that’s the approach we all took. In order to remain professional and credible we need to be seen as student journalists who can put out accurate reporting before our own kind of interest in the activity.\nWhile it’s never easy to put that kind of disclaimer, we thought that it was very important to do so because of how we want other students to see the way we’re taking our journalistic responsibilities seriously.\nDK: I was in Speech and Debate and I already left Debate for unrelated reasons, but I knew a lot about the culture and a lot of the negative impacts of the culture of that specific group. Ethan was part of it for longer than I was, but he knew all about that too, and we have people in The Black and White who are also part of that and are still involved in Debate. So, it was important that we didn’t use our knowledge of that culture to make us feel like we knew exactly what had happened. We still had to figure out what had happened and uncover what had happened even if we had our suspicions. It’s still important to uncover the exact facts of what actually happened.\nOn the other hand, it actually could be useful at some points to know how that culture worked. It was both difficult to sort out but also very informative to know these people and have gone to school with them for so long.\nDY: For other student journalists who are in your position of reporting on stories like this, do you have any tips for them about how they could go about navigating these conflicts and challenges?\nDK: Earlier in the year, I just hadn’t talked to our principal because maybe I was intimidated, maybe I thought that he wouldn’t have anything to say on the issue. But one thing that was really helpful to this story, to future stories, and to just my understanding of the whole situation was that I spoke to the principal. That interview was actually really important because he gave me a wider perspective and also opened up a lot of important avenues that I had to really investigate more. So a tip to other journalists in this kind of situation would be don’t back away from the source that could possibly add something because it could be extremely important to this story and to the path of the entire reporting process on the issue.\nES: Speak to all the interested parties. Even if what they say could open the door even wider and you’re trying to get a story out, if you know someone’s waiting behind that door and you still don’t open it, it’s not necessarily fulfilling your responsibility as a journalist.\nDY: Dani, going back to a previous answer you gave, you noted that some sources after that Post story came out were a little wary to talk about things. What did the information-gathering process look like while you were working on the story?\nDK: Part of what we were reporting on was the school’s response, which was pretty quick and extremely messy. And inside the school’s response, there was actually a lot going on in terms of students feeling like they couldn’t say something because they had been warned not to by teachers, or administrators were shutting me out because it was an active investigation. So there were a lot of places I was going where I was finding people who weren’t willing to speak or only willing to speak anonymously.\nOne of the biggest things for me was that every single person who was in a restorative justice session that I was reporting on were told that they could not speak about what happened in that room, or they could be removed from the Debate team. So the fact that I was able to get people to talk about what happened in that room, it had to be anonymous.\nEditor’s Note: Restorative justice sessions are a method of conflict resolution. In response to this incident, Whitman Debate leadership partnered with the Montgomery County Public School’s Restorative Justice Unit to hold three sessions that all Debate team members had to attend.\nOn the other side, there are rules about privacy for minors and investigations of disciplinary issues in schools that made it possible for administrators to just refuse to speak on the issue at all, which was really frustrating because Ethan and I knew exactly what happened and I just wanted to hear what they were thinking or what they were doing and they refused to speak about it at all.\nDY: So once you did gather all that information and you had what you needed to sit down and write, what did your process look like?\nDK: It was only, technically, my second news story ever. So I definitely was pushing the reporting along, but I had a lot of help in terms of the writing. The situation was changing so drastically every single day and there was so much more information coming out every single day that I could have pursued for hours or days. And my adviser and Ethan were both telling me, at some point you just have to stop and click publish and write a follow-up if that has to happen. That was a really difficult lesson to learn and that was probably the hardest part of the writing process. At some point, I just had to stop and let it be final.\nES: That was something that was very hard for all of us because we always want to be at the front of what’s happening and put it out there as it’s happening. So to be able to find that point at which what we’re putting out is all the information that’s available at that point, when there’s so much new information always coming out, made for some difficult judgment calls, but they’re ones that we all just put our heads together to make. Dani was still doing reporting even as we published and the response that administrators were taking was pivoting so quickly based on community response. There were a lot of things that could almost be seen as the story, so how do you all package it together?\nDK: Another thing about student journalism that was so great and so evidenced by this story, is a lot of us weren’t big fans of The Washington Post coverage because when you’re so close to an issue, the kind of aloof way that the major news outlets report on things that take our school by storm can sometimes be frustrating. So we felt like we were responsible for coloring in every single possible detail because we felt like we owed it to the student body to the parents, the community. We also wanted to hold certain people accountable that weren’t being held accountable by the broader coverage that had been done by the Washington Post.\nWe had that exigence as student journalists because our community is all in this building, or connected to someone in this building. So me, Ethan and multiple other people related to the Black & White were skipping classes on that one day to get this all done. I was on the phone with some parents, doing interviews, getting calls and it definitely felt like something that you would do if it was your full-time job. That was really inspiring to me, that it was so important to us as a publication to get out all this information. It was a lot of effort and a lot of passion for what we were about to put out and what we eventually did put out.\nDY: What tips and advice would you give to other students who are also multitasking, trying to do all these things at once and report on such an important story?\nDK: If I didn’t have Ethan in this situation, I would have been screwed because I didn’t have the knowledge that I would need just on the news basis. I had the ability to push so many things through but I didn’t necessarily have the skeleton. That was what Ethan with his broad experience with a variety of stories, including news, was able to give me. It’s just so important to have someone probably older than you, depending on how your student publication works, that has experience in this that while you’re getting all the colors and all the details…they can tell you where to put them and how to shape them most accurately.\nObviously, you’re going to have an editor but it’s important that you have someone who’s also a mentor. If you’re writing something important, it’s important to have people who can support all the parts of that process, the reporting, facts gathering, research. Obviously having the SPLC supporting you in what ways you can disclose information. All those things, I would have been lost without Ethan and my adviser.\nDY: It’s been a couple of months since your story ran. What impact did you see your original story have on the community?\nDK: I think that there can be rumors in a school, but I think the reputation of The Black & White is such that when we report on it, it becomes more than a rumor. I think it was significant to the people in this school who didn’t really think it was funny and thought it was actually really serious that these comments had been made. It was really helpful in the community to legitimize the things that people were hearing and also delegitimize some of the ridiculous things that have been spun, which happens in high school.\nPeople felt like no consequences had been given and people were frustrated about that. At least us covering it so that people knew what happened was, I think, a really powerful force and making people feel like they had gotten justice that the administrators weren’t able to give them.\nDY: In a previous conversation, Ethan said this story provided validation to the Debate students affected by these comments which I thought was really interesting. Do you either of you want to expand on that?\nDK: I think that a lot of those students were formally or informally told that they couldn’t confirm or deny any of the rumors that they were hearing even though a lot of people were turning to them for more information or for, you know, juicy gossip. So I think that that was a group that was very relieved by the fact that The Black and White was able to put out information. Everything’s flying around the hallways, but then The Black and White releases a report on all of the true facts that actually happened. I think it probably took a lot of weight off those students who were already under so much stress and pressure about the actual incident that had occurred.\nDY: What are the biggest things that you took away while working on this story from your respective positions as the reporter and as the editor?\nDK: It’s not that public shaming is the answer or that legitimizing rumors is the answer to put these people in their place. But when people hear what the truth is and they’re able to form their own opinions based on factual information, I think we actually see a community opinion emerge whereas that wasn’t possible when you were hearing the most ludicrous stuff surrounding these names and these people in this event.\nES: It’s important to always be looking for places that you can, as an editor, support writers and reporters in really any way possible even without taking the role of a writer or a reporter. The all-hands-on-deck approach is what’s really necessary for a story like this, and I think by employing that you’re able to put out what we did.\nDY: Is there anything we didn’t chat about in terms of your story or your process for the story that you’d like to share?\nDK: One thing that I would add is I was super intimidated when I got the first ask from Ethan to cover anything antisemitism-related because I was a feature writer. But now that I look back on it, I feel so lucky to have been the reporter that went deepest into antisemitism. A lot of the time, I think about what would have happened if I had said sorry, I’m busy today, give it to the news writer. I’m just really glad that I jumped onto this journey. And that’s the biggest piece of advice I would give to any reporter: If you get an opportunity to do a story that scares you, you should do it.", "label": "No"}
+{"text": "This week’s topic ties in perfectly with what I’m doing this week!! What am I doing, you’re wondering? Well…\nThat’s right! A whole week dedicated to Kristan Higgins! Monday through Friday I’ll be posting a review of one of her books!\nAnd who better to showcase this week because her books are so swoony. :) I���m going to give you a list of my favorites in order, in countdown form. So lets get started!\n10. Fools Rush In\n4. The Best Man", "label": "No"}
+{"text": "South Hadley, MA 01075\nMath and Physics Tutor\n...Disjunctive Addition, universal and existential quantifiers, conditionals, biconditionals, sets, relations and equivalence classes. As a requirement during grad school toward getting my MA, I had to take the math Praxis and passed it the first time I took it and...\nincluding algebra 1, algebra 2 and biology", "label": "No"}
+{"text": "The battle has begun, and these four young women will be immersed in an arduous struggle of cock sucking and handjobs in which the man who shoots his cum the farthest wins. partouzes entre mecs webcam tube videos\nHe may not be loved by a lot of people but there is something we have to admit, which is that no man on earth with his kind of physique has fucked as many woman as he did, like for instance the spectacular Yoha. la plus grosse bite\nle village antibes Bossy redhead MILF Veronica Vain licks a petite teen pussy Piper Perri outdoor on top of a car vidio sexe xxl\nNasty mature stepmom Darryl Hanah horny threesome action with teen couple in the bedroom regarder film porno en streaming gratuit\nnoam gottesman lucy liu Later she'll take his big cock in her mouth and he'll return the favor. xxx tv sex sex portuguais\nBut, this young slut is going to receive the treatment she's screaming for - a violent gangbang that transports her to ecstasy. xxx tv sex\nThis cute Colombian teen called Jade Kitti hides between her legs a tiny and juicy treasure: her delicious and tight pussy. sex portuguais\nregarder film porno en streaming gratuit You don't really know where it comes from but, as soon as you notice the beautiful and extremely horny Romanian Girl on the bed, you just get that Honey Demon really knows how to pick a stage name...\nOnce they're back in the room, she'll masturbate herself to get ready for the way he's going to fuck all of her holes.\nla plus grosse bite In this case it will be the three black men who penetrate her orally, anally and vaginally. partouzes entre mecs\nIn this video you will see her having an intense improvised fuck with Moisex after convincing him to go with her home and fuck. big boob\nGroup of beautiful teen besties show off ass and get their pussy screwed by nasty dudes outdoors\nerog mature To keep her butt fit, she needs at least one dick a day.\nbruce lee my brother He is sure it'll be a perfect day and Sunny saying she can barely fit it in her mouth is an excellent prelude of what a good time they will have fucking.\nmeek mill tickets we have a very special guest star called Emilio Ardana. fils kate et william\nThis is the scene where her awesome buttocks were the leading stars, together with Nick Moreno's fat dick. jay z twitter\nAlberto massive cock is able to perform the task in the best way possible so Daniela just has to worry about moaning like a bitch in heat.\nfan de bas nylon If it's well relaxed, it will sway very sensually up and down and from side to side, making all the people smile and making them have a horse erection. noam gottesman lucy liu\nteen porn videos Undoubtedly, we're talking about Rob Diesel and Anita Ribeiro. amber rose nude\nBoth of them together sign a historic bang, a sexy newsflash. news about paris\nThe boss arrives at the office to find the new intern: a young blonde with little tits and a slutty face. miniature rhododendronslincauknab\nThis is the thing about growing up, one day you worry about being a princess in her castle and when you are older, you are wishing to have sex with a black man who is well equipped with a good cock to stretch your pussy with a steamy fuck session\nlansing correctional facility Skinny shoplifter teen chick with nice tits gets punish fuckeld by the mall officer after she got caught stealing lingerie and panties\nx factor saturday The women take any opportunity to fuck any guy that goes to their houses. london andrews bio gene simmons demon\nSexy black teen Julie likes her new hot neighbor.She seduced him and gave his giant white dick a sloppy blowjob then fucked all over the living room. gene simmons demon london andrews bio", "label": "No"}
+{"text": "THE Penrith Panthers senior men's basketball team will begin their 2014 Waratah Championship League pre-season campaign on Tuesday, February 18, when they take on the imposing Northern Suburbs Bears at SCEGGS, Cremorne.\nFormer Panther and veteran NBL journeyman, Ben Knight, will lead the Bears again this season and has been keeping in great form by playing in the Ultimate Basketball League.\nKnight also has two other former Penrith players in his coaching panel: Travis Lane and Kyle Cox.\nIncoming Penrith head coach John Hennessy will rely heavily on his two key players, Louis Brandt and Ben Kearins, who are benefiting from intense training as development players with the Sydney Kings NBL franchise.\nNeither player has been getting court time during the current season but the experience gained from this training with the full Kings squad will allow both players to step out with more skills in 2014.\nFormer Springwood Scorchers big man Jarrod Sorenson is the latest addition to the Panthers squad.\nSorenson has already represented New Zealand on the international stage but this will be his first season in the WCL. Other key players include Emlyn Dodd, Sean Albert and Josh Morehead.", "label": "No"}
+{"text": "International Shipping: This site http://blog.womenforhire.com/bets/oz-lotto-watch-draw.html oz lotto watch draw item is not eligible for international shipping. salesblog.rennie.com http://salesblog.rennie.com/wp-includes/bets/monte-casino-floor-plan.html Monte Casino Floor Plan Not everyone is willing to pay February 7th, our Bantam A teams played a friendly GEODUCK CLAMS CASINO game against each other at the Subzero Tournament that took place in Ile Perrot.\nOverseas members EITSKW.COM\nMaster Win Tips Thai Lottomay not buy or sell firearms on the site. Look for some amazing values at new york state lottery past winning numbers site Site Southern California casinos in October. Around the Empire engineers and designers Lotto Results 26 December 2015 were crunching numbers and drawing up new designs as men being haunted by unspeakable things. The number of balls 21 03 15 Lottery Results Online pmhg.de was increased from 34 to 39. The woman got into a taxi (stock image) in Sydney's north, on June 5 before she fell william pierron poker asleep.\nThe site is currently not available due to technical problems. Please try again later. Thank you for your understanding.\nIf you are the maintainer of this site, please check your database settings in the\nsettings.php file and ensure that your hosting provider's database server is running. For more help, see the handbook, or contact your hosting provider.", "label": "No"}
+{"text": "Take 15%* OFF Your next purchase when you join our email list\nThis offer is valid for first-time email subscribers only. To take advantage of this offer, enter your email address before closing this window. You can unsubscribe at any time. 15% off promo code will be sent via email, and will be valid for a one-time use within 30 days of email signup. Some promo code restrictions apply. You can opt-out any time by clicking the \"unsubscribe\" link in your email.\n*15% off promo code valid for use on over 100,000+ items.\nA deep espresso finish, transitional design\nand fabulous function make Hillsdale Furniture‘s Arcadia gathering table a perfect fit into your kitchen. Complete with an extra storage shelf underneath, this ensemble boasts a sophisticated square tapered leg. Composed of hardwoods, climate controlled wood composites ...\nThis beautiful solid wood furniture from\nInternational Concepts is a great additional to your home. With its unfinished surface, you can customize it to make it your own by matching your existing color scheme. Constructed of solid parawood for long lasting durability Mission ...", "label": "No"}
+{"text": "For detailed procedure follow this knowledge base “OL2000: Calendar or Task Reminders Do Not Appear” @ http://support.microsoft.com/default.aspx?scid=kb;en-us;195964 The alternative command to troubleshoot the problem is to issue the command “outlook /cleanfreebusy” I need help with a computing problem Fill out this form to submit your issue to the UITS Support Center. From the Account Settings drop-down menu, click Account Settings.... Choose to export including the subfolders to a PST file. http://gnumatic.com/reminders-not/outlook-task-reminders-not-working.html\nOutlook 2010: Calendar or Task Reminders Failing to appearStep 1 Verify Outlook reminders are turned on with the steps listed above. I checked their settings within Outlook (File-->Options-->Tasks) and (File-->Options-->Advanced)...in the Advanced tab the \"Show Reminders\" box is checked. I'm just not sure why or how an admin UN/PW combo could affect Make sure the Display the Reminder option is selected. Full name Email address Please provide your IU email address.\nRelated articles Some Standard ColdFusion Tags Tips and Tricks My BlackBerry Device Does Not Synchronize With My Calendar. Subscribe to RSS Feeds by Email Top ContributorsTodaySpiderWorks St... (4)Mahesh (2)Ankit (1)Last 7 DaysMahesh (130)Ankit (102)Tony John (100)more... Than perform the above troubleshooting steps Command Line switches In outlook there are other switches which will help you in fixing other issues in outlook such as Command-Line switch Last modified on 2016-02-09 00:00:00.\nYour cache administrator is webmaster. In Outlook 2010, make sure the \"Show Reminders\" check box is selected. Now the alerts window will pop up again in front of everything!Guest Author: ST25 Mar 2014Thanks a lot \"Guest Author\" since your very simple on top of that) solution fixed the Outlook 2016 Reminders Not Working If it was already selected, continue on to fix corrupt reminder files.Step 3Exit Microsoft Outlook.\nSelect \"Outlook/Clean Reminders\" from the result list. Outlook 2010 Reminders Not Popping Up Windows 7 I am trying my best to make their job easy. By checking the status of the feature, enabling it if necessary and fixing corrupt entries, you can fix this issue and reinstate correct reminders in Outlook.Step 1Start Microsoft Outlook. How subfolders are synchronized on iPhone LoginRegister Articles All ArticlesAndroid DevicesAdSense TipsBlogging TipsSubmit ArticleForum Discussion ForumsAsk ExpertsAnnouncementsAbout Techulator.comStart ThreadProduct ReviewsPractice TestsGiveawaysMembers Reward ProgramsSocialHelpNew Posts ResourcesTroubleshootingSoftware Issues Outlook calendar and task reminders\nFind how to delete an email alias from your Microsoft account.What is the difference between folders and categories in Outlook Are you confused on the difference between folders and categories in click In Outlook 2010/2013, go to File > Options > Advanced and find the Reminders section. Outlook 2010 Reminders Not Working Reply Subscribe View Best Answer RELATED TOPICS: Outlook reminders not popping up Outlook Reminders are staying in the background Outlook Appointment Reminders hidden in background   9 Replies Outlook Reminders Not Popping Up In Front Go to the \"Tools\" menu in Outlook 2003 or 2007 and select \"Options.\" Select \"Other,\" click the \"Advanced Options\" button and choose \"Reminder Options.\" In Outlook 2010, go to the \"File\"\nStep 3 Click Options. Outlook 2007 Reminders Not Working Outlook 2003 Calendar or Task Reminders Failing to appear:Step 1 Verify Outlook reminders are turned on with the steps listed above. If this field was already checked, then please make a backup of your data and proceed with the steps below.\nTo fix the issues follow the below steps in order. About Advertising Privacy Terms Help Sitemap × Join millions of IT pros like you Log in to Spiceworks Reset community password Agree to Terms of Service Connect with Or Sign up Close Outlook, then click Start > Run, and type in:outlook.exe /resetfoldersand press Enter or click OK.All of the reminders that you have missed should start to appear on your screen now. Outlook 2007 Reminders Not Popping Up Here, I have tried to give solution or troubleshooting steps for two versions of Outlook (2007 and 2010) when a user does not get reminders in the outlook.\nPlease find below the defined steps and the best practices practised by the top professionals in MNCs. This is a strictly moderated site. The Microsoft knowledge base “XCLN: Reminders for Appointments Do Not Appear” @ http://support.microsoft.com/default.aspx?scid=kb;en-us;281315 applies to Exchange 2000 but it really worked for exchange 5.5 also. navigate here This article has the procedure to perform the step3 To backup the folder use the File->Import/export menu.\nMy meeting reminders always appear on top of other windows now. Close Outlook. Read this article to find out the differences between a folder and category in Outlook.Why Hotmail id is better than Outlook.com mail id? Please read the below article to know the steps to confirm your Outlook reminder settings and to repair a corrupted reminder file on your computer.\nThis article will cover the steps to get this working and other command line options available to handle other various issues of outlook.", "label": "No"}
+{"text": "Get More Info »\nFREE GUIDE INCLUDEDTop 10 Tips for Buying Property\nResidencial “Turquesa del Mar” located in Playa Flamenca offers a complex with 54 properties in varios types of models ranging from 1,2 and 3 bedroom, ground floors with gardens and tall plants ensuring privacy to all the residents, top floors as well, offering spectacular sea views, from it's fantastic terraces, highest quality materials have been used to build this site.\nHow is Brexit likely to affect non-resident's Income Tax in Spain?\nDo you own Spanish Property via an international Company?\nSpanish House Prices continue to rise sharply\nSpanish Mortgage Approvals soared by 34% in April 2018\nSpanish Holiday Rental Taxation for non-resident Landlords\nNumber of Brits buying Costa del Sol Property has doubled because of Brexit\nAll property news from Spain\nSubscribe to our RSS Feed\nSubscribe to our newsletter and keep up to date with the latest and best investment opportunities around the world!", "label": "No"}
+{"text": "The Coachman's Lodge\nSelf Catering Accommodation (Rental)\nOld Bond Store, Dillon Terrace, Ballina, County Mayo, Ireland\nSleeps 8 people\nSleeps 8 people\nLocated in the bustling town of Ballina, 100m for the River Moy and world famous salmon fishing Ridge Pool. The Coachman's Lodge is tucked away under an archway, this olde worlde town house is truly delightful and full of character and charm.\nThe property emerged from a converted Victorian bond store and is over 100 years old. Radiating from a cobbled courtyard each property in this development is tastefully presented and blends timelessly from residential to commercial as town houses, restaurants and pubs all merge together beautifully.\nWith its solid beams, winding staircase and attic rooms, this cosy terrace house is a wonderful base from which to explore the wonders of North Mayo and Enniscrone. A walk on the blue flag beach at Enniscrone, followed by a seaweed bath is truly invigorating, whilst a stroll into the town in the evening to enjoy the lively pubs and restaurants is a must.\nConsists of a cosy ground floor Livingroom with open fireplace leading to a well equipped Cottage style Kitchen with pine dresser.\n- Fully fitted Kitchen - cooker, fridge, microwave, dishwasher, washing machine, all crokery & cutlery\n- Colour TV\n- 4 Bedrooms (all timber floors)\n- Bed 1 - twin beds + ensuite\n- Bed 2 - double\n- Bed 3 - double\n- Bed 4 - twin bed\n- All bedrooms have whb\n- Shower (electric/power) & Toilet\n- Freezer facilities for fishermen\n- All linens, heating and electrics included\n- Childrens facilities / family friendly premises (cot available on request)\nNearby Local Amenities\n- 18 hole Golf Course\n- Swimming Pool\n- Horse Riding\n- Forest Park\n- Blue Flag Beaches\n- Ceide Fields\n- Rosserk/Moyne Abbey\n- Vast array of quality Restaurants & Cafes\n- Traditional music pubs\nFrom Sligo road, 1st bridge turn right over bridge, 100m on the right under archway.", "label": "No"}
+{"text": "As far enough, to terminal of\nAnstatt wie Cookies auf Ihrem Gerät gespeichert zu werden, lots of seating with USB and electric, die für Sie und hinsichtlich Ihrer Interessen relevanter sind. Your users will be able to see this page once they are logged in. They collect information about your use and interaction with our Services so that we can continue to improve and expand our Services. They are not separate venues. Cookies können von der Website erkannt werden, this is not an international airport.\nThanks for all the legwork you do for the rest of us. It was in a gift or airport directions to terminal. Flying into the Marine terminal is the best part of the trip. Sans ces cookies, Kenya Airways and more. Glad everything worked out for you! Top US Rental Car Locations. Processing is necessary for compliance with our legal obligations, few airlines continue to offer the checked baggage opportunity. These deals online at various banking services to lga are the gate of rental cars and will have a disaster and airport terminal support of. Lounges are quiet spaces where you can relax and escape the stress of the terminal. Your credit or debit card will be charged upon reservation confirmation.\nAs we use and government assistance to the flushing parking spot locations you may use only thing i make material contained within new delta to terminal map with the security checkpoints provide the. Dallas Farmers Market is home to Dallas vendors, zu verhindern und abzuschwächen, star rating and more. Get the latest deals and more. Visitors preferences selected time as: gourmet market and which is another nj bus goes underground in the rental charges of this policy. Kiosks in the same area by which you can arrange a shared ride or car service.\nFor lounges inside security or immigration, CT? Check them out and see if this option is for you. Thank you for your understanding and continued loyalty. Appreciate any suggestions you might have. Take the backdoor to your aircraft. Aircraft was dirty, Chapala Av. We boarded and any special offers directly into this web to manhattan for being delta terminal? When a Clipper landed in Long Island Sound, and you may have to go along for the ride while other passengers are dropped off at their destination first. So far, we may monitor and verify your identity to prevent unauthorized access, how do I get to the Newark Liberty Airport? Australia has expressed anger over the airport incident which had aimed to check if women had given birth.\nYour airport to airport directions on a and\nImportant than those millions of use of the heart of this from laguardia to airport directions terminal c, like the rental car services below is no account for a group. Quick and informative site after a foreign currency used for me know the directions to. Here is how you can prevent the Apple Software Update screen from appearing. Save my name, Airport transportation, services such as fast track and luggage wrapping and all the news about the airport. Save on LGA airport parking today!\nWe sent a link to set your new password by email. What mode of transportation is mostly recommended? LGA ones, along with complimentary shuttle to the airport. Maintenance updates are in progress. Have a great NYC trip! There are signs that will direct you to the taxi stands outside ever terminal in the airport. Before we use your personal information for purposes not described in this Policy, departures, notwithstanding that some prices may be displayed in local currencies. Not asking much from an airline: be on time, a conveniently located hotel near the Javits Center and other iconic attractions and activities. Share your stories and meet fellow drivers, diagnosis, I waited for over an hour for my car because of construction.\nIt is currently has expressed anger over active\nSend Payment Newark Premier Farnell Canada Ltd. Naep national assessment of educational progress. This is a great place to learn all the basics of ridesharing. Little Italy was once home to generations of Italian Americans. How do I navigate at LaGuardia Airport? Identified or Aggregated Data. Lyft or Uber app. Order for their app store delicatessens convenience store defined for which delta to airport terminal map to. May not agree that connect the directions to laguardia airport delta terminal? The traffic will be heavy. Should you want to save a bit of money, they may not be accepted for the credit hold required when you pick up your vehicle. We work will then switch between the delta to airport directions.\nIt looks like nothing was found at this location. This code did not match any active gift card or discount. Times Square or in midtown west, American Airlines, Sara. Flights to Latin America and the Caribbean. Actual fares may vary. Such entities will be given access to your information as is reasonably necessary to provide the Service under reasonable confidentiality terms. Passengers services are also boarding was no matching system was it is something to which will identify which gate you wish the terminal to airport directions. This to airport directions to allow limitations may bring everything.\nJohnson also played a role in the Dallas shooting. Monash university malaysia biomedical science. And Amtrak, follow Runway Dr along the airport perimeter fence. Price is fixed upfront and always less than a standard Lyft. You can also do this to go to your hotel. Use a vendor that offers the refund. Airport Restaurant folks OTG Management opened this trattoria along with famed chef Michael White. Get from as they are several companies to return, airport directions subject to your reservation receipt to any user experience! US will be required to present a non US issued drivers license and a non US issued passport OR an international airline ticket at the time of rental to qualify for the rate. The latest La Guardia Airport customer reviews La Guardia Airport. Fast track in my flight where i report bad experience on aggregate ratings from your pup while getting the laws of this to airport terminal?\nIf it to airport terminal while on arrivals\nOur advertising partners will collect information about your interaction with their advertisements to measure the effectiveness of our advertising campaign and to deliver advertisements that are more relevant to you and your interests. At airport locations, or maintained outside of the country or jurisdiction where you are located, and The Cheesecake Factory. LGA to DTW do fluctuate a lot more than the majority of routes in US. Shake Shack locations may be closed temporarily or operating with adjusted hours. Please enter the correct password.\nSpirit airlines to terminal\nHi and thank you for this very informative site. Children below and plenty of the next to take. The upcoming Lunar New Year holiday in Taiwan is like no other. Note: Rates are calculated based on details you provide. LGA LaGuardia Airport Better Airports Now. Filter panel is now closed. Avis customers will proceed to the Avis shuttle bus; which will then take customers directly to Car Rental Facility. It is intended to be used for general information purposes only and, airlines, Business Partners and Others. New york city views from people park is delta to airport directions terminal? Greenville spartanburg airport to terminal: flying from the page, only gets worse.\nApplicable date for Tax Refund for Tourists Scheme Conditions for tourists to claim their VAT refunds Federal Tax Authority has allocated spaces where tourists can reclaim taxes through a fully. Is it quite easy and clear to take the bus and subway? How you to airport directions terminal b terminal b no. US airport, professional, please visit avis. Do you think is a good idea to return the car in La Guardia or JFK because then we need to figure how to go Manhattan. Thanks so much, in Midtown East Manhattan, lounge bookings are exclusively available with an American Express card. Your particular need to getting the delta to two buildings or dropping them after they would have been no wifi by whom a message directing you? If you've booked a flight at LaGuardia Airport you should inform yourself about the opening hours when to arrive and how to get a ride Read on. New York Metropolitan area.", "label": "No"}
+{"text": "CHRIS OYAKHILOME: BIOGRAPHY OF THE PRESIDENT OF CHRIST EMBASSY CHURCH\nChris Oyakhilome is an Nigerian pastor, TV host, as well as a writer. He is the President and CEO of Believers’LoveWorld Incorporated which is also known as Christ Embassy International.\nChris Oyakhilome Background Pastor Chris Oyakhilome was born on 7 7 of December 1973, to Mr. and Mrs. Tim Oyakhilome, as the first son of the family. After his primary and second education, he enrolled in Ambrose Alli University in Ekpoma (Edo State), Nigeria, where he received a BSc. in Architecture.\nAAU also awarded him an honorary Doctor of Science award. He also has an honorary Doctor of Science from Benson Idahosa University. Reverend Chris was once married to Anita Obhodaghe, and they have two children.\nChris Oyakhilome Ministries\nPastor Chris Oyakhilome began his ministry while he was still an undergraduate student at AAU. The Believers’ LoveWorld Fellowship currently Believers LoveWorld Incorporated, was at that time known as Youths For Christ.\nYFC was quickly growing and soon was the largest campus-based group. Chris Oyakhilome BiographyOyakhilome In 1989, Pastor Chris established Believers LoveWorld Incorporated (BLW), alongside Christ Embassy. The church's headquarters is in Lagos. The Believer's LoveWorld has millions of associates and followers all over the world.\nThrough the 2002 atmosphere for miracles, BLW rose to prominence as an Christian ministry on television in Africa. They stopped airing the program in May of 2004, following the former president of Nigeria- President Olusegun Obasanjo declared that miracles should be ceased by churches.\nPastor Chris's Ministry includes four divisions: healing ministry, publishing ministry, television ministry and teaching ministry. He derived the healing school, the atmosphere for miracles, and the Pastor Chris global prayer network from these ministries.\nChris Oyakhilome Foundation International Future Africa Leaders' Foundation (FALF) The Future Africa Leaders Foundation has been established to investigate and develop the potential for leadership of Africans. Pastor Chris Oyakhilome The foundation assists young Africans who show leadership and have positive effects on their generation. They do this through education and mentoring youth and youth empowerment.\nThe foundation celebrates the accomplishments of the young leaders by holding an award ceremony, The Future African Leaders' Awards. This ceremony is held at the LoveWorld Convocation Arena(LCA) Billings Way Oregun Ikeja. The award is presented to the winners by the President of BLW The Reverend Chris Oyakhilome.\nThe InnerCity Mission For Children\nThe InnerCity Mission to children is an evangelical nongovernmental Organisation. The NGO was started in 2005 to assist vulnerable, low-income orphaned children around the world.\nChildren and their families are helped by the foundation's sustainable and participatory interventions. These include child care programmes as well as child development programs and programs to strengthen families.\nTrauma Care International Foundation\nThe TraumaCare International Foundation was established to increase the life expectancy and health status of local communities. This foundation will help support the national policies for trauma treatment by providing their advocacy as well as health education and community-based initiatives.\nhttps://www.pastorchrisoyakhilomeevents.com/ More than a thousand sessions of training in emergency and safety were provided by the foundation. The record says that they were able to train thousands of schoolchildren, law enforcement officers as well as teachers, caregivers and road transport workers.\nVolunteer Medical Corps (VMC). The Volunteer Medical Corps, a christian medical outreach, is dedicated to providing aid material as well as medical aid and education to people who are internally displaced and refugees living in areas that have been affected by man-made and natural catastrophes.\nThe outreach consists of students from across the world as well as paramedics, christian health workers. These volunteers provide relief assistance, medical aid and sustainable solutions to those living in communities and regions which are experiencing crisis.\nChris Oyakhilome VMC also offers healthcare services to communities unserved as well as manpower development for doctors in the local area. Anyone whose primary intent is to improve health and offer humanitarian aid to those in need are welcome to be a part of VMC's outreach. VMC outreach.\nBible For All Nation (BFAM) Bible For All Mission (BFAM) is a Christian non-profit organisation, which is dedicated to the development, production and global distribution of the bible to people of all ages and gender in the language and format they can comprehend. Through this, the mission is helping them learn the Bible and to be able to experience the life-changing message that Jesus has for us.\nBFAM distributed hundreds of thousands of Rhapsody Bibles to people as well as prisons, communities as well as private and government institutions around the world. It includes Philippines, Gambia, Ghana and Nigeria. This was made possible by an extensive global network of Bible sponsor volunteers, donors and other supporters.", "label": "No"}
+{"text": "White croc print one shoulder tie waist jumpsuit\n£15.00 (50% off)\nWhite jumpsuit with croc print finish, tie waist belt, slim fit and one shoulder design.\nModel wears a S/UK 8 and her height is 5'9\"\nDELIVERY | RETURNS\nUK STANDARD (up to 5 Working Days)\nUK NEXT DAY (Order by 9:30pm Sun-Fri)\nUK SATURDAY (Order By 9:30pm Friday)\nPlease Select an Available colour/size", "label": "No"}
+{"text": "Fashion Nova Models Names List 2020\nFrom the model s perspective instagram is a great platform for them to share their work introduce the personality behind the perfectly posed pictures and build up their portfolio to obtain impressive global reach.\nFashion nova models names list 2020. Her appearance in the music video for robin thicke s blurred lines in 2013 is what made her internationally famous and was also featured in the 2014 and 2015 sports illustrated swimsuit issues. You ve seen them on the latest fashion campaigns on pretty little thing oh polly missguided their sassy their sexy they come in all shapes and sizes and they give us serious body goals. Here s our pick of the top accounts.\nThey are instagram models and they are taking the world by storm. Best plus size models and curvy models to follow on instagram to make your feed a feel good body positive place. Kendall jenner kendalljenner.\nWith that in mind we ve put together a list of the top 50 instagram models to follow. Originally from bad salzuflen. Prada chloé stella mccartney and chanel a german beauty in the vein of julia stegner and toni garrn berit heitmann is a classic stunner.\nOther accolades include being named the world s hottest male model at the coveted new york fashion week media awards in 2017 and starring on the cover of vogue with bella hadid. Vernon ca 90058 choosing a selection results in a full page refresh press the space key then arrow keys to make a selection. Ready for the next big name.\nAll professional fashion models with letter a alphabetical list. Model and actress emily ratajkowski might be one of the shortest models in the fashion industry but she s definitely also one of the most successful and hottest swimsuit models. Vlada roslyakova famous russian fashion model model kiana alexis with oxygen gearing up to premiere strut sept 20 at 9 8c a show about the first all trans modeling agency we are producing of articles fashion nova plus size curve model controversyblonde models 8 top with hair fashion gone roguefashion nova models names blonde image read more.", "label": "No"}
+{"text": "Let me start by saying thank-you to all of the many family and friends who have sent cards, flowers, kind spoken words, prayers, offers for meals, and many other blessings our way during this extremely difficult time. There have been numerous people who have been in my situation (unbeknownst to me) who have reached out to me saying really the only thing that I want to hear right now: There's nothing that I can say that will take away your pain... but I promise you it will get easier.\nBelieve it or not, hearing from someone who has been in my shoes say \"there's nothing I can say that will take away your pain\" is a hundred times more comforting than the other \"condolences\" people offer. And I know, because I used to be one of those people who had no idea the depth of the anguish and misery that someone who has experienced a miscarriage feels, that most people just don't understand... and they think that they are saying things to you that will comfort you, but sometimes their words end up adding salt to the wound.\n\"Oh Sweetie, there was probably something terribly wrong with the baby...\" \"It's a blessing that the baby didn't go full term because imagine the heartache you would have if the baby would've died then...\" \"It was probably for the best because something was obviously very wrong.\"\nREALLY?! DO YOU THINK THAT BY TELLING ME THAT THERE WAS PROBABLY SOMETHING WRONG WITH MY BABY, THAT'S SUPPOSED TO HELP ME FEEL BETTER? BE RELIEVED?? ARE YOU KIDDING ME???!\nI'm angry. I admit it. I'm not exactly sure who I'm angry with, or what, but I can tell you that my feelings of extreme sadness are coupled with anger. I'm angry because there are over 115,000 abortions performed daily on women who CHOOSE to kill their babies because they don't want them or because they'd be an inconvenience. ...And then here I am. Ever since I was a little girl, when someone would ask me what I wanted to be when I grew up, I would say \"A Mom.\" I prayed for this baby, I had dreams and hopes for this baby, and I loved this baby with every fiber of my being. And now it's gone. While it is comforting to know that I'll get to hold my baby in heaven one day, do you realize how incredibly shocking it is to find myself looking forward to dying just so I can hold my baby?!? -Now, let me just say right now that I am not suicidal. I'm simply stating that I used to be somewhat afraid of death, and now I don't fear it because I know that my baby will be waiting for me as soon as I enter the pearly gates.- ...It just breaks my heart that that moment feels so far away and out of reach. Some mommies who have experienced miscarriage went through this grief in their second or third pregnancies after having a baby already... and while I don't know for sure, it has to be somewhat, to a very tiny degree, easier because you can hold onto the baby that you have and be thankful for it while you grieve the loss of your little one. And then there's me who is falling to sleep each night clutching tightly to a pillow, just so that my arms don't feel so empty.\nI know that God loves me, and I know that He loves my baby. I know that God will provide the comfort and grace that I need to get through this. ...But knowing isn't the same as feeling. While I know these things, I don't necessarily feel them right now. The same God who is supposed to (and will, eventually) provide me with a peace that passes all understanding is the same God who willed my baby's life to be so short. How is that even possible?! Like I said earlier, I'm angry... but I'm trying to be real with God. I'm praying to Him in a language that is real and personal... not all religious-ese. I'm telling God exactly how I feel but also asking Him constantly for comfort, grace, mercy, and peace.\nThen there's the guilt. It just won't go away. I know in my heart of hearts that there is nothing that I did that hindered my baby from growing and being healthy. But I still can't shake this feeling of guilt. I feel like a failure. I'm embarrassed by the fact that I've had a miscarriage and it hurts. I'm so anxious about going back to work where I told a few of my teacher friends of my pregnancy and having to tell them the bad news, because I honestly feel like such a failure. It's a miserable feeling... and again, this is one of those moments when I'm asking God to cover me with His grace and give me peace. Because I know that prayer is powerful, and I feel like prayer is the only thing in addition to time that might take away the guilt.\nWhile I am angry, sad, and experiencing these feelings of guilt and failure, I have had some moments where I begin to experience a feeling of calmness and comfort. The place where I feel \"the best\" right now considering the circumstances, is in the sun. When I sit in the sun and just bask in the warmth and talk to Jesus, I start to feel a tiny bit better. I tell him how I'm feeling and what I need... and I give him specific messages to whisper in my little one's ear. I spent close to two hours on my deck yesterday... and I was outside again this afternoon. The sunlight kissing my face is just so peaceful and I feel like it's God's way of saying, \"It'll be okay.\" Just run to the Son, and everything will be alright.", "label": "No"}
+{"text": "This sauce has just the right balance of tangy sweetness and heat. Try it on ribs as well as chicken.\ncan tomato sauce\nred wine vinegar\nground red pepper (cayenne)\nchickens (3 1/2 pounds each)\n- In 10-inch skillet, heat oil over medium heat until hot. Add onion and cook about 10 minutes or until tender and golden, stirring occasionally. Stir in tomato sauce, vinegar, molasses, Worcestershire, sugar, and ground red pepper; heat to boiling over high heat. Reduce heat to medium-low and cook, uncovered, 45 minutes or until sauce thickens slightly. If not using sauce right away, cover and refrigerate for up to 2 weeks.\n- Reserve 1 1/2 cups sauce to serve with grilled chicken. Place chicken quarters on grill over medium heat; cook 20 to 25 minutes, turning over once. Generously brush chicken with some of the remaining barbecue sauce; cook 20 minutes longer, turning pieces often and brushing with sauce frequently, until juices run clear when chicken is pierced with tip of knife. Serve with reserved sauce.", "label": "No"}
+{"text": "Originally Posted by tweak177\nA coworker of mine just had a sinus infection, but he didn't get it taken care of and it lead into one of his eyes and attacked the muscle. He is still on disability after a couple months and has no depth perception, it's likely he's not going back to work.\nDa fuk? I've had 3 ear/sinus infections this year. But have never heard of that.", "label": "No"}
+{"text": "Fears over long-term future of St Mary’s Hospital\nSt Mary’s Hospital in Paddington could be forced to close after its commissioning body released radical plans for the future of the area’s hospitals.\nNHS North West London (NHS NWL), which commissions healthcare in eight boroughs including Westminster, has released a report painting a damning picture of the area’s healthcare.\nThe report, Shaping A Healthier Future, says more money should be spent on local community health services and less on hospitals.\nOn Monday NHS NWL medical director Mark Spencer said the future would see fewer hospitals that are larger and more specialised.\nAsked if hospitals would have to close, he replied: “Almost certainly. Some of them will continue as diagnostic and outpatient facilities, but it’s likely some of them won’t have hospital beds in them as they do now.”\nYou may also want to watch:\nThe report says the changes are “about saving lives, not money” but concedes �1billion needs to be slashed from budgets by 2014/15.\nThe plans do not reveal which hospitals would be worst affected, but show that Imperial College Healthcare NHS Trust, which runs St Mary’s, has a �19million deficit – the largest of any NHS trust in the area.\n- 1 Crunch! Eliana and Ariella's granola business success\n- 2 UK's first no chicken nugget shop pops up in Camden Town\n- 3 'We've been forgotten': Homeless Muswell Hill family demand action\n- 4 ‘I was livid': Outrage as Camden homeless man sprayed with hose\n- 5 New Jewish Fringe festival comes to Golders Green\n- 6 Mayor of Camden joins West Hampstead Primary School renaming fair\n- 7 Police name Newham man fatally shot in Haringey\n- 8 'Land grab': Muswell Hill Gail's accused of taking over pavement\n- 9 West Hampstead community backs Nazanin 2,000 days since imprisonment\n- 10 Man jailed for rape of young girl in north London 40 years ago\nAn NHS NWL spokeswoman said: “If we are to maintain and improve good quality care for patients in the future in north west London, hospitals will have to change.\n“Nevertheless it is not anticipated that any hospital site will cease to offer services. Where possible care will be kept local, but it may make sense to bring some services together and specialise.”\nThe report says NHS buildings in north west London are generally in a poor stateand “patient experience is generally poor”.\nIt also reveals “many staff would not be comfortable sending their own relatives to hospitals in north west London”.\nCllr Barrie Taylor, who sits on the council’s health scrutiny committee, said: “People should realise that there will be serious outcomes to this and I have no doubt that local people will want to keep St Mary’s. NHS NWL has got to prove that anything it changes is going to be improved.\n“We can’t just assume and accept that they have to make cuts.”\nAn Imperial College Healthcare NHS Trust spokeswoman said the process is in the early stages and any changes will need to show the benefits to patients.\nShe added that the trust hopes to break even financially by next year.\nThe report’s proposals will form the basis of a public consultation starting in June.", "label": "No"}
+{"text": "Double exposures, especially, achieved to indicate pale or ghostly images on screen. As the nineteenth century gave way to the twentieth, artists and engineers were all pushing the boundaries of film. During the time, stage magicians entertained massive crowds with illusions and magic tricks, and decked out their units with elaborate units, costumes, and characters.\nChristina Ricci additionally stars within the movie as Katrina, Ichabod’s love interest, and the inheritor to one of the town’s richest farmers. When Ichabod learns the killer is the demonic Headless Horsemen, he has to discover a way to save Katrina. The movie Horns, starring Harry Potter actor Daniel Radcliffe, is now streaming on Netflix as nicely.\nAs with most horror tales like this, the sights aren’t a present and include an ominous and lethal risk to not only the child but the couple who took him in. Directed by Scott Derrickson, who went on to direct Marvel’s Doctor Strange, Sinister is a haunted house story with Ethan Hawke in the lead function. As with many King horror tales, this story introduces a man who does the unthinkable and has to reside with the results for the remainder of his life.\nThe stylish Thirst packs plenty of bloody thrills to satisfy fans of both vampire films and director Chan Wook Park. Flawed however eminently watchable, Joel Schumacher’s teen vampire thriller blends horror, humor, and plenty of visible style with standout performances from a solid filled with young 1980s stars.\nWhile filmmakers just like the Lumière brothers were tinkering with motion image units and shot documentary-like movies, Méliès, and to an extent, Segundo de Chomón as well, were creating magic tips on film. They created subtle sight gags and theatrical particular effects to both entertain or scare the viewers. Segundo de Chomón produced a handful of spectacular trick movies, including this one; La casa hechizada, or The House of Ghosts made in 1908.\nOf The Best Horror Movies From Black Directors\n- On 14 February 1931, Universal Pictures premiered their first movie adaptation of Dracula, the popular story of an ancient vampire who arrives in England where he preys upon a virtuous young lady.\n- 1931’s Frankenstein was based mostly on a 1927 play by Peggy Webling which in turn was primarily based on Mary Shelley’s classic 1818 Gothic novel.\n- The film was directed by James Whale and stars Boris Karloff as Frankenstein’s monster in certainly one of his most iconic roles.\n- A hit with both audiences and critics, the film was adopted by multiple sequels and along with the identical yr’s Dracula, has turn into one of the most famous horror movies in historical past.\nDark, violent, and drenched in dread, Goodnight Mommy is perfect for extreme horror fanatics — or filmgoers who prefer to observe between splayed fingers. Restrained but disturbing, A Tale of Two Sisters is a creepily effective, if at occasions confusing, horror movie. As with the primary film, Scream 2 is a gleeful takedown of scary movie conventions that manages to poke enjoyable at terrible horror sequels with out falling sufferer to the same fate.\nAfter assembly Captain Spaulding and discovering the legend of Dr. Satan, they find a hitchhiker named Baby (Sheri Moon Zombie) and find yourself again at her house the place they meet her household — The Fireflys. The film is the introduction to the Firefly Family, who later returned within the superior The Devil’s Rejects in 2005 and three From Hell in 2019.\nInfamous for its bathe scene, however immortal for its contribution to the horror style. Because Psycho was filmed with tact, grace, and artwork, Hitchcock did not just create trendy horror, he validated it. With Jordan Peele’s second ingenious, ambitious horror movie, we’ve seen how to beat the sophomore jinx, and it is Us. Well-acted and fiendishly frightening with an emotionally affecting story at its core, It amplifies the horror in Stephen King’s basic story without dropping contact with its heart. Smart, subversive, and darkly humorous, Ready or Not is a crowd-pleasing horror film with giddily entertaining chew.\nSuccessfully mixing the conventions of the teenager and horror genres with a twist, Australian director Sean Byrne makes a putting directorial debut with The Loved Ones. Relying extra on temper and environment than the thrills typical of recent horror fare, Universal’s The Mummy sets a masterful template for mummy-themed movies to observe. Chilling performances and a restrained, eerie atmosphere make this British horror both an unnerving parable of its era and a timeless traditional.\nThis intelligent horror film is subtle in its thrills and chills, with an ending that is each stunning and really memorable. The Exorcist rides its supernatural theme to magical effect, with exceptional particular effects and an eerie environment, leading to one of many scariest films of all time. Deft direction and robust performances from its all-feminine forged guide The Descent, a riveting, claustrophobic horror film. Smartly filmed, tightly scripted, and — most importantly — consistently frightening, Poltergeist is a contemporary horror classic. Campy by trendy standards but spooky and atmospheric, House on Haunted Hill is a fun, properly-executed cult traditional that includes a memorable efficiency from style icon Vincent Price.\nMovies In Theaters\nWhether you might be looking for a scary slasher movie, a haunting ghost story, or something more realistic and terrifying, there is something here for everyone. George C. Scott stars as a lonely man whose household was killed in an accident.", "label": "No"}
+{"text": "A beneficial Websites and you may Offer: Wikipedia article on the only Kids Coverage Wikipedia ; Family unit members Believe for the Asia ; Christian Research Display screen review of Way too many Boys csmonitor ; National Bureau off Statistics of Mans Republic of China ; Trend into the Chinese Demography afe.easia.columbia.edu ; Wikipedia blog post Wikipedia ; Institute out of Society and you may Work Economics ; Marriage: Wikipedia post Wikipedia ; Chinatown ConnectionChinatown Partnership ; Take a trip Asia Book travelchinaguide ; Agate Travel warriortours : Relationship Chinatown Connection Chinatown Partnership ; Matrimony Relationships Tradition chinese-poems ; Divorce: Divorces on 1990’s technical.mit.edu ; ily Laws ; Foreigners and you can divorces during the Asia\nenjoys cut back the technique of prostitution and you will promoting feminine. Some girls and you may young women was basically kidnaped and brought to Asia and you can sold because brides and prostitutes. The latest Wall structure Path Record described twenty two-lady who had been given employment at the a chocolates factory. Whenever she turned up for really works she was abducted and you will drawn across the edging in order to China and sold in order to a farmer to own $350. The first kidnapper receive money as much as $100 having rest visiting the agents. Most other women were marketed to brothels.\nInto the 2001, Related Push reported: “In the ten,400 Vietnamese female had been ended up selling to Asia to get wives away from Chinese dudes or to act as maids or prostitutes, your state-regulated papers stated towards the Monday. [Source: Associated Drive, -]\n“Because normalization, there’s been improved trading plus check outs because of the villagers over the edging. Dudes inside southern area Asia who have difficulty to own spouses. Vietnamese wives are also popular among Taiwanese guys and you can Vietnamese Us americans. From inside the Ho Chi Minh City alone, more 10,000 Vietnamese women has married foreign people previously while, officials state. Every overseas grooms is Taiwanese otherwise Vietnamese Us americans. Vietnamese cops has separated several female trafficking bands when you look at the current decades. –\nVietnamese Bride-to-be Trade in China\nReporting from Dongxing, Asia,Ma Guihua from Inter Push Provider had written: “The newest reducing away from border limitations ranging from China and Vietnam has provided a benefit so you’re able to impoverished Chinese producers: a reliable increase off Vietnamese brides. All of these ladies are brought to China by peoples traffickers and you can offered on the marriage, however, many are simply just looking a much better lifetime. Indeed, Chinese bodies are sometimes mad after they repatriate Vietnamese female only to possess her or him go back to Asia the moment the back are turned. “Shortly after a quick look within the Guangxi I believe greatly perplexed myself on whether or not it is illegal migration or individual trafficking,” said Liu Meng, professor within National Ladies’ College away from China. Of one’s 7 brothers on the Deng friends for the Ban’ai community, some 20 kilometers out of this town towards border that have Vietnam for the Guangxi Zhuang Independent Area during the southwest China, five keeps Vietnamese wives. Deng Wenquan, 32, keeps a beneficial Vietnamese spouse regarding Hanoi, to own just who he paid down on eight hundred yuan (US$48) as he got an appreciation so you can their own at good villager’s household. [Source: Ma Guihua, Inter Push Solution, ]\nOf your full, 1,829 feminine has escaped back to Vietnam that have two hundred children fathered by the Chinese, the newest Nong Thon Ngay Nay (Countryside Now) paper cited a Ministry out of Societal Cover statement since claiming\n“She actually is sweet and you can great at cleaning. My mothers treat their really. Life is today a tiny better than the changing times without their unique,” said Deng, exactly who extra which he wants to go to his mothers-in-laws from inside the Vietnam if the he’d the bucks. Deng Wenquan looks surer regarding their wife than just his elder-brother Deng Wendong, whoever very first Vietnamese spouse ran out of (the guy presently has one minute one to). “I offer their unique done independence,” told you Wenquan. “She’ll sit in the event that she desires to accept all of us.”", "label": "No"}
+{"text": "A great cooperation with an extensive preliminary process and a wonderful end result!\nDuring the Zomerparkfeest in Venlo, Lamberink Events helped to ensure that Holland Casino was clearly visible through the exposure in the Ferris wheel.\nVisitors to the 4-day free festival made good use of the 33-meter-high ferris wheel throughout the weekend with a beautiful view of the Julianapark and even the city of Venlo.\nThanks for the great cooperation!\nMarketing & Sales\nHolland Casino Venlo", "label": "No"}
+{"text": "Welcome to Seaglass Shore Condominiums where beach days were meant to be enjoyed all year long!Hampton Beach's newest residential community is a 4-story, 20-unit building just steps to the sand and features custom finishes, the highest quality materials and a host of upscale amenities. Every 2 bdrm, 2 bath open concept unit comes complete with a balcony offering ocean and harbor views from most units, underground parking and communal rooftop deck ideal for entertaining. Hampton Beach is one of New England's hottest real estate markets thanks to the complete and ongoing renovation of the beach and is consistently voted one of the top beaches in the region, making it the ideal investment opportunity.\nPrices from $359,900 - $419,900. Inquire today or join us for an OPEN HOUSE every Sunday from 11 am - 1 pm!\nGo on a virtual tour and see for yourself how Seaglass Shore is setting the standard for Hampton Beach living with its spacious condominiums.\nKathy Macgregor, Weichert Realtors, 603-944-1279", "label": "No"}
+{"text": "Lord Peter and Little Kerstin\nA collection of medieval Swedish narrative ballads in a new English verse translation. The ballads in this book tell tales of love and death, kings and knights, and the supernatural spirits of the water and the woods. These lyrical songs were part of a tradition in Scandinavia that combined folk music and storytelling. These new translations make these medieval Swedish folk ballads accessible to an English-speaking audience.\nIt was foreseen that Little Kerstin would drown on her wedding morning. Lord Peter sets sail, even though he was warned to avoid the sea. Sir Olof happens upon an elf-dance on the day before his wedding. Little Kerstin falls for the Mountain King and runs away with him to live in the high fells.\nLittle Kerstin and Her Man; Lord Peter and Little Kerstin; The Power of the Harp; Sir Olof and the Elves; Lord Peter's Sea-Voyage; Little Kerstin the Stable-Boy; Little Kerstin's Enchantment; The Mermaid; Sir Arvid; Little Kerstin and the Mountain King.\nPaperback, 58 pages with 4 illustrations. Published 2013. Note that there is no musical score included in this book.\nLord Peter and Little Kerstin: Medieval Ballads from Sweden,\nTranslated and introduced by Ian Cumpstey\nI am sending these books to UK addresses, £10.00 including P&P\nSecure payment on the PayPal site\nBooks are sent from the UK.\nOverseas customers check the options below, or if you really want to buy one of these copies from the first print run direct from me, send me an email the check postage options (see the contact page).", "label": "No"}
+{"text": "Buddy4Study India Foundation is a not-for-profit organization. It has been helping deserving students, who face financial problems, in completing their education.\nDr Abdul Kalam Scholarship for Medical/Engineering AspirantsDeadline30-Jun-2021\n- Open for students appearing for national/state level medical/engineering entrance exams.\n- Must be an Indian citizen.\n- The applicants must have passed the Class 12 board with minimum 55% marks (Those appearing in the board exam in 2021 are eligible to apply. However, they will have to present the result-sheet after their results are announced)\n- The annual family income should be less than INR 3,00,000 (3 lakhs) per annum.\nCourtesy – Buddy4Study", "label": "No"}
+{"text": "Bienvenidos A Nuestra Boda. Worry free ordering! I will send a test piece as well as clear instructions for application. If in the very rare occasion any section gets messed up upon application, you can order a replacement section for $6 to cover shipping and fees.\nNOTE: This is for the decal only. No sign is included. I do have a listing for the actual wood sign with this design in my store if you are interested.\nDecals are available in many colors and are made of permanent vinyl which will hold up for years even in the outside elements.\nI will send a mockup for all orders for you to approve. If I do not hear a response within 48 hours of sending the mockup, I will assume that you approve of the mockup and send out the order.\nHOW TO ORDER:\n1. Fill out the personalize section with name and date as you would like it made.\n2. Choose your SIGN dimensions, NOT the size you want the decal. Depending on length of names and sign size, the decal size can change. By ordering your sign dimensions I can design the sign with no worry about staying within a size. Order based on your sign size or if the sign has a frame, the flat area within the frame. Also, please include the orientation of your sign, whether it will be vertical (taller than wider) or horizontal (wider than taller) in the order checkout. Don't see your sign size? Message me and I will be happy to add it.\n3. Choose your color. Choose from the list of font colors which you would like. I have a few popular ones listed and then a selection of custom color. Just look at the picture in the listing with my color options listed and include which font color you prefer.\nThese work on almost all surfaces. Wood, painted, stained, glass, plastic, acrylic, mirror. They are made with outdoor vinyl and meant to last in the rain, heat, and elements for years.\nPlease message me with any questions.\n3-5 business days\nBuyers are responsible for any customs and import taxes that may apply. I'm not responsible for delays due to customs.\nJust contact me within: 7 days of delivery\nShip items back to me within: 21 days of delivery\nRequest a cancellation within: 6 hours of purchase\nBut please contact me if you have any problems with your order.\nBecause of the nature of these items, unless they arrive damaged or defective, I can't accept returns for:\nBuyers are responsible for return shipping costs. If the item is not returned in its original condition, the buyer is responsible for any loss in value.\nMessage me with any questions related to personalization. Also, don't see something you want? Ask me. I can personalize shirts, onesies, aprons, pillows, mugs, tile, canvas, you name it.\nIf you are ever unsure you picked the correct options at checkout, just pick the frame size you want and then in the personalize section include your frame color choice, font color choice or choices, and the background choice if other than white.", "label": "No"}
+{"text": "Indian home remedies for piles pain relief in hindi\n36 Lavender for remedies Anxiety Lavender flowers are an ageold remedy for anxiety. To reduce the pain felt due to piles 24 Ginkgo for AntiDepressantInduced Sex Problems An enormous number of Americans take antidepressants. Concluding that the herb significantly reduces the frequency of migraine occurrence. Bathing by itself indian home remedies for piles pain relief in indian hindi is calming, the herb worked hemp seed is it good for you as well as the drug and pain better than the vitamin. Just be patient, the figure was just 15,. Which are beneficial for curing piles. Investigators gave 202 insomniacs valerian second degree burn symptoms or a Valiumlike tranquilizer 43 Peppermint for Irritable Bowel Syndrome IBS involves persistent abdominal cramps. In the placebo group, british researchers at the University of Exeter analyzed five studies of peppermint oil as a treatment. Duke says, in my experience, those who were cancerfree drank the most green tea. Facts or opinions appearing in the article do not reflect the views of ndtv and ndtv does not assume any responsibility or liability for the same. High blood pressure requires professional care. The main cause of adult tooth loss. I was surprised to find that Rick Simpson Oil was hard to find in medical marijuana. Tell your physician about any herbs you plan on using. For GI infections ulcer, flatulence, hemorrhoids are common among adults, subjects who ate the most garlic had the lowest risk of colon cancer. Pilex can be one stop solution for fissures and fistula indian victims too 45 Red Pepper for Pain Relief Capsaicin. Feverfew prevents migraines in about twothirds of those who use it consistently. An added benefit, or validity of any information on this article.\nFresh australian dream walgreens turmeric root, the herb group showed cannabis oil recreational use significantly greater relief from knee swelling 19 Ginger for Motion Sickness In ancient China. This herb helped scour pots and pans. In the list of key ingredients include Lajjalu a kind of sensitive plant and Yashad Bhasma also known as Zinc Calx. Which boosts oxygenation of the blood. But if you drink the juice. Eat a teaspoon of ground, from an average of 15 millionml to 29 millionml. Japanese researchers reported in Cancer Letters that breastcancer survivors who drank three or more cups a day reduced the risk of recurrence. And also relieves from normal skin related issues like inflammation. The herbs significantly improved several measures of memory 4 Increase in Water indian home remedies for piles pain relief in hindi intake, and make tea, then an enzyme transforms alliin into a powerful antibiotic called allicin. This causes more pain and irritation. But chaste tree has hormonal effects that minimize monthly symptoms. Antifungal, its also used in skincare products.\nNaproxen stomach pain treatment\nIs that it is available as an ointment and tablet as well. Pilex By Himalaya, and pancreas, most research has used green tea. In 1982, rectum, pilex helps in shrinking thromboses piles mass and also controls bleeding. Witch Hazel can be applied pain for all kinds skin. Certain visible symptoms that would help recognize the issue are present. But that sensation desensitizes nearby pain nerves. Key ingredients, green tea also appears to protect against cancers of the colon. And soothes pain in deeper tissues.\n8 coffee as a Decongestant in Colds. One must make sure not to eat food products that contain too much fiber. Have these pregnant twice a day along with the water in which they have been soaked. It treats osteoarthritis, worked best, according to investigators at Indias Central Drug Research Institute. Flu and Asthma, in combination with boswellia, which is an option for women who cant take estrogen. The herb, stick to the dose specified in the studies or on the product label..\nNatural after birth pain relief\nParticularly green tea, after four weeks, these indian home remedies for piles pain relief in hindi two natural ingredients are great herbal remedy for surface tissue regeneration. Drinking tea also improves survival odds after heart attack. Has rocketed to prominence as an herbal medicine. Researchers at the University of Washington have shown that garlic kills. The herb reduced symptoms and accelerated recovery compared with placebos. Twice a day, its safe and the studies are convincing. Many reports 48 Tea for Heart Health Tea. Flaking was reduced 11 percent in the plainshampoo group. Ibuprofen or acetaminophen increases pain relief by around 40 percent.\n27 Ginseng for Immune Enhancement Many studies show that ginseng revs up the immune system. It also mimics HRTs bonepreserving ability. And another important thing is it has almost no any side effects but yes dosage and frequency of its application is what matters 15 Flaxseed for Osteoporosis Because flaxseed is a natural hormone replacement therapy. Consuming these homemade products on a daily basis will definitely help within 23 weeks. Ginkgo how to legally grow medical cannabis in michigan Improves blood flow around the bodyincluding through the brain.", "label": "No"}
+{"text": "From Tesla to Amazon and more, don't miss a beat when it comes to the business world. Keep up with all of the latest in business news here.\n19 Ex-McDonald's Workers Returned to Their Old Restaurant for a 'Class of 1975' Reunion Almost 50 Years After Working Together\nSeven of the 19 people at the reunion went on to become franchisees.\nLatest from Business News\n- Yes, You Can Buy a Foldable Tiny Home on Amazon — And Now It's Selling for Less Than $12,000\n- Fanatics Wants to Create the 'Comic-Con of Sports' with Tom Brady, Derek Jeter, and More Hall of Famers at Its Inaugural 'Fanatics Fest'\n- This One Word Is a Giveaway That You Used ChatGPT to Write an Email, According to an Expert\n- This Futuristic Wearable Smartphone Alternative Projects a Screen on Your Palm — And It's Now Widely Available\n- I Was a Personality Hire. We Get Away With Doing Less Work, But You Can't Deny Our Value to the Office.\nMore Posts on Business News\nThis Futuristic Wearable Smartphone Alternative Projects a Screen on Your Palm — And It's Now Widely Available\nHumane's Ai Pin fastens magnetically to clothing and becomes a voice-activated AI assistant that can make calls, send texts, take notes, and find answers to complex questions.\nI Was a Personality Hire. We Get Away With Doing Less Work, But You Can't Deny Our Value to the Office.\n\"The world runs on favors, and you don't do favors for people that you don't like.\"\nThe Franchise Industry is on The Verge of Massive Change With Private Equity's Potential $8 Billion Acquisition of Jersey Mike's\nTwo iconic brands, Subway and Jersey Mike's, may sell to private equity after years of being closely held. Heavyweight PE firms are an increasing force within the franchising sector, marking a strategic shift and altering the industry landscape.\nNew data from law firm Henley & Partners found that Americans outnumber all other countries for having secondary citizenship.\nSide Hustles Are Soaring as Entrepreneurs Start Businesses Working Part- or Full-Time Elsewhere, According to a New Report\nThe younger the entrepreneur, the more likely they were to start a business as a side hustle.\nThe new roll out is only available in Europe as of now.\nThe average U.S. household is paying $227 more per month for goods compared to one year ago.\nThe earworm may be lucrative for the 1970s band Pilot and their song, \"Magic.\"\nFour days after celebrating their annual \"Wrapped\" campaign with an exclusive party in November, Spotify cut 1,500 jobs, including employees who worked on the campaign.\nDude Perfect currently boasts over 60 million YouTube subscribers.\nStarbucks plans to introduce about 650 new stores and renovate about 1,000 with sound-absorbing ceiling panels by October.", "label": "No"}
+{"text": "Loads of viral videos, games, memes, lists and social networking for when you're bored. Updated every day, so visit often.\nLifestyle, Arts & Lit.\nNews & Politics\nSkritch Skratch Of Busy Hands\nShare on Tumblr\nSkritch Skratch Of Busy Hands. A wierd and funny animation about the power of a little boys imagination.\n+ Add to Favs\nemail a friend\n14 Comments -\n(separate multiple emails with commas)\nI-Am-Bored's Must See Photo Galleries:\nAmerica, this is why you're fat, Part 2 [20 Pics]\nDaddy Didn’t Hug Me Photos, Part 1 [23 Pics]\nAll things Batman on I-A-B, Part 1 [19 Pics]\nBEHOLD The Choking Game [Gif]\nThe new fad. It`s all fun and games until somebody really chokes. What wrong with kids these days?\nFeel This Lump [Pic]\nFeel it faster....\nGrow Up Wendy... [Pic]\nStop being a leech and get a job already.\nUnbelievable Old School Sexiest Advertising [Pix]\nExtremely sexist ads from 50`s, 60`s, 70`s including the Lysol douche--- yes, I said Lysol douche!\nSo Is This Cheating? [Pic]\nOr just perverted?\nMore Comments >\nFemale, 18-29, Eastern US\nMonday, July 13, 2009 6:17:58 AM\nMale, 13-17, Europe\nSunday, July 12, 2009 9:08:02 AM\nUpon watching this video I would recommend it to a peer, citing its deadpan humour and unique animation style as points of cultural interest to the viewer.\nAND I SAW BOOOOOBIES\nFemale, 18-29, Australia\nSunday, July 12, 2009 7:18:10 AM\npink floyd's the wall. invader zim.\nthat is what it makes me think of.\nMale, 18-29, Eastern US\nSaturday, July 11, 2009 7:04:27 PM\nhaha that kid is a cross between stewie griffin and beavis and butthead\nMale, 13-17, Canada\nSaturday, July 11, 2009 6:02:20 PM\nIt's busy LITTLE hands get it right\nMore Comments >\nSuggest a Link\nContact I Am Bored\nAbout I Am Bored\nLink to I Am Bored", "label": "No"}
+{"text": "Shrien Dewani returned to the UK this week after being cleared of plotting his wife’s murder. A case that has been at the forefront of the nation’s mind for four years has finally come to an end in a surprising verdict from Judge Jeanette Traverso.\nThe British businessman, whose wife was shot whilst on their honeymoon in South Africa, was acquitted following Judge Traverso’s ruling that the prosecution had provided insufficient evidence to convict him. Giving her ruling, she claimed that witness Zola Tongo’s statement was “riddled with contradictions” and “highly debatable.”\nbeing gay is unacceptable amongst Asians - an issue that Dewani himself battled with\nAlthough deemed “irrelevant,” the Dewani case was rocked by surprise confessions from Shrien Dewani about his sexuality. Irrespective of the case and whether or not his innocence is veritable, it is certain that Dewani intentionally hid details about his sexuality from his wife and both their families.\nAsian Gay Men\nAdmitting to being bisexual and having relationships with men, including male prostitutes, Dewani’s confessions have reawakened the debate about sexuality in the South Asian community. It is a long standing issue that being gay is unacceptable amongst Asians - an issue that Dewani himself battled with. Dewani’s revelations cannot necessarily be used as implications of his guilt, but should instead be used as a way to highlight underlying issues in the Asian community.\n80 cases of forced marriages involved members of the LGBT community\nIt’s surprising that old-fashioned views are still very much rife amongst Asians in Britain. The Asian gay community is still vastly underground – despite there being a few prominent figures who have braved ‘coming out.’ People such as Asifa Lahore – the first British Asian drag queen – have definitely helped the Asian gay cause but certainly haven’t solved the problem of the lack of acceptance.\nDewani is just one of many stereotypes which prove how difficult it is to be gay (or bi-sexual) and Asian - stereotypes that exist solely as a result of a disobliging Asian society. Many cases of false marriages, murders and even suicides have emerged purely because of non-acceptance within the community.\nThe existence of active websites dedicated to gay Asians proves there is certainly a covert group of individuals desperately seeking likeminded people. Sham marriages – involving gay men and lesbians - are also becoming increasingly common to keep up appearances to unsuspecting families. According to recent figures, the UK’s Forced Marriage Unit has reported dealing with 80 cases of forced marriages involving members of the LGBT community. However, because these marriages are for the most part voluntary, many go unreported.\nIt is a sad state of affairs that in modern times men and women cannot live their lives openly and honestly. It is much worse once you taken into account the innocent victims whose quality of life deteriorates because of a simple lie.\nCan the Asian community really justify the loss of innocent lives for the sake of what they deem ‘normality’?\nWe only need to take a look at the headlines in the past couple of months to see that it is a pressing issue. The horrific case of Jasvir Ginday who murdered his new wife and burned her body in an incinerator following her threats to ‘out’ him to the community, highlights his desperation to ‘save face.’ This desperation of acceptance or peace was prevalent in the case of Harley Street doctor Nazim Mahmood who threw himself off his apartment balcony after being told by his mother to ‘cure himself.’\nIn the face of so many tragic murders and suicides, can the Asian community really justify the loss of innocent lives for the sake of what they deem ‘normality’? Is it reasonable to drive people to murder and mental illnesses just because their families are afraid of what ‘people might think’?\nThe Asian community has to evolve with the times, take an introspective look at their issues with the LGBT community and allow people to be themselves.", "label": "No"}
+{"text": "The Banking Industrys Go-to Crisis Adviser\nRodge Cohen is one of the most influential people behind the scenes of cleaning up the banking crisis.\nThere are plenty of differences between the fallout from the collapse of Silicon Valley Bank and the 2008 financial crisis, but one similarity is the man trying to clean it up: H. Rodgin Cohen, known as Rodge, the senior chair at the law firm Sullivan & Cromwell.\nThe soft-spoken Mr. Cohen was at the center of efforts to save Silicon Valley Bank and First Republic, the latter of which involved a call between the Federal Reserve chair Jerome Powell, Treasury Secretary Janet Yellen and the JPMorgan Chase boss Jamie Dimon. Heres what to know about one of the most influential players in the banking crisis who isnt making headlines.\nMr. Cohen is a sought-after adviser in banking crises, and he has worked on almost every one in the last several decades. Rodge is the banking lawyers go-to theres nobody who comes close to his level of reliability in the entire realm of substantive banking law, said Sarah Raskin, a former deputy secretary of the Treasury. She added that she still finds herself in rooms of lawyers asking, What would Rodge say?", "label": "No"}
+{"text": "They are usually cases in controversy from lower appeals courts. From a constitutional perspective the Supreme Court has stepped entirely outside its boundaries by simply taking the case.\nAnd many lawyers after they make their first argument have commented on how surprisingly intimate the space feels Greenhouse describes the.\nHow much does a supreme court lawyer make. A Complete Guide to SUP on Lakes Rivers and Oceans How to Paddle SeriesBen Marcus. How Many Judges Does It Take To Make A Supreme Court. Supreme Court Justices are eligible to receive a lifetime retirement pension equal to their highest salary.\nAnd Other Essays On Law And The ConstitutionJohn V Advanced Calculus Dover Books on MathematicsNE. Madison decided in 1803. The Chief Justice of the United States 280050 a year.\nIn particular United States federal judges confirmed under Article III of the Constitution have compensation that shall not be diminished during their continuance in office. At the July 9 announcement of his nomination to the US Supreme Court Judge Brett Kavanaugh said that judges should interpret the law not make the law. As discussed in a previous section the Supreme Court has the power of judicial review.\nFederal judge salaries in the United States are determined by the United States Congress and are governed in part by the United States Constitution depending in part on the court on which the judge sits. IV 6 The Supreme Court shall consist of a Chief Justice and six Associate Justices but the General Assembly may increase the number of Associate Justices to not more than eight. The 30588750 amount is based in part on Goldsteins 1100 hourly fee plus 750 for partner Kevin Russell and 600 for partner Tejinder Singh.\nAn average practicing lawyer in Delhi trial courts earns roughly 50k to 100k and in High Court double of that. 79 Per Cent High Court Lawyers Say Junior Advocates Earn Less Than Rs 10 000 Survey Latest News India Hindustan Times How Much Are Lawyers Paid In Nigeria 2020 Salary Of Nigerian Salary Of Lawyers In India Litigation Vs Corporate Legodesk. Supreme Court Associate Justices 268300 a year.\nMountains of PakistanShiro Shirahata The Art of Stand Up Paddling. Lawyers charge all different sorts of rates starting from the low-hundreds per hour for a junior lawyer to 11000 per. Supreme Court big lawyers can charge their clients anything they feel like.\nThe court receives between 7000 and 8000 petitions each term and hears oral arguments in about 80 cases. In this article well explain all the factors that go into legal fees so you can get an idea early on of how much your lawyer will cost. The Chief Justice of the US.\nSupreme Court Justices Do Make the Law. The federal court system including the Supreme Court has limitations as to the types of case they can hear and they are listed in Article III Section 2. Goldstein said in an affidavit that the fee.\nSupreme Court justices hear oral arguments and make decisions on cases granted certiorari. The Supreme Court does make law. How much do solicitors and barristers make.\nMale solicitors 138379 20854 solicitors. The views expressed by contributors are their own and not the view of The Hill. The Wall Street Journal subsequently praised Trump for keeping his promise to choose someone who will faithfully interpret the.\nBy Arthur Eisenberg opinion contributor 102620 1000 AM EDT 521. This profession could be anything like running a Paan shop to running an airline. When factoring in bonuses and additional compensation a Law Clerk at Supreme Court of the United States can expect to make an average total pay of 98131 per year.\nThe median salary means half the judges make less than this. The justices are defying their procedural rules to rewrite the Constitution. The following are the 2020 yeary salaries of the Supreme Court Justices.\nThis power was first exercised in the landmark case of Marbury v. According to the ATO the average taxable income for solicitors and barristers in the 20132014 financial year was. The Supreme Court Is Making New Law in the Shadows.\n79 Per Cent High Court Lawyers Say Junior Advocates Earn Less Than Rs 10 000 Survey Latest News India Hindustan Times Salary Of Lawyers In India See How Much Indian Advocates Earn How Much Money Does A Lawyer Make In India 8 Billion Voices. Judges preside over higher courts such as the District or Supreme Court while magistrates sit in the Local and Childrens courts. The courts eight associate justices average 255300Those wages are more than double an annual median of 109940 for all judges according to the United States Department of Labor.\nSupreme Court earns an annual salary of 267000 according to the Administrative Office of the US. The Supreme Court of the United States has an extremely important policymaking role and this has an enormous impact on the criminal justice system.", "label": "No"}
+{"text": "Physician Perspectives on Current Vendor Viability: 3 Statistics\nThe Second Annual Practice Profitability Index: 2014 edition, sponsored by CareCloud, in partnership with QuantiaMD.\nWhen asked how comfortable they were with their current vendor viability, respondents reported:\n• Comfortable — 45 percent\n• Uncomfortable — 33 percent\n• Don't know — 22 percent\nThe 2014 edition includes responses from 5,064 physicians.\nMore Articles on Practice Management:28% of Orthopedic Surgeons Currently, Plan to Participate in ACOs\n10 Ways to Improve Collections at Medical Practices\n7 Ways to Earn Respect, Rather Than Demand It\n© Copyright ASC COMMUNICATIONS 2015. Interested in LINKING to or REPRINTING this content? View our policies by clicking here.\nTo receive the latest hospital and health system business and legal news and analysis from Becker's Hospital Review, sign-up for the free Becker's Hospital Review E-weekly by clicking here.\nNew From Becker's ASC Review\n5 rules for successful email campaignsRead Now\n- Physician employment vs. private practice: 14 statistics on pay, satisfaction & more\n- BCBSA report: Hip, knee replacement billing can vary widely in the same market\n- The Surgery Center of Genesee County achieves accreditation\n- Judge drops class-action suit in Sutherland Healthcare Solutions stolen records case\n- Downtime for EHR vendors: What are they doing?", "label": "No"}
+{"text": "Not sure if you have an online account? Please email email@example.com\nAppointment Exists! Please update or cancel below.\nDon’t see a time that works for you? Please Live Chat or call us in Phoenix at 602-328-5066 or Tucson at 520-618-1884 and let us find a time that will work.\nSimply hit \"schedule appointment\" to book your Replacement Appointment.\nChas Roberts Plumbing\nSpeak to someone in Customer Service.\nComplete a satisfaction survey.\nTake Survey >\n\"Your tech was courteous, thoughtful and professional. We loved him!\"Betty E., November 2012\n\"Your tech was courteous, thoughtful and professional. We loved him!\"\nBetty E., November 2012\nArizona ROC#: 019133, 277496\nNew Mexico ROC#: 374158, 369418", "label": "No"}
+{"text": "Paul South entered yesterday's John F. Kennedy 50-Miler with just several months of hard training under his belt following two years when he did little serious running.\nBut South proved he still has the knack to excel at one of the world's most grueling sports in winning the ultramarathon from Boonsboro to Williamsport, Md., in 6 hours 11 minutes 49 seconds.\nConnie Gardner, a 41-year-old from Medina, Ohio, won the women's race for the second time in three years with a time of 7:31 flat.\nSouth, a 31-year-old from Boulder, Colo., held off a vigorous charge from one of the legends of ultramarathons, Ian Torrence of Boulder City, Nev., who finished just a minute and a second behind.\nBut the less-experienced South -- who said the end of a recent long-term relationship encouraged him to get back into competitive running -- proved to be the strongest runner of the race.\n\"I would feel guilty if I waste what I have, while I can still run like this,\" said South, who won a 50K race this summer. \"I have some friends from Colorado who told me about this race, and it was a goal of mine to come here and run.\"\nAt the midway point yesterday, though, South thought seriously about dropping out. He battled nausea for about an hour and even had to walk portions of the race.\n\"If things continued the way they did I would have had to stop, but things turned around,\" South said. \"I think I threw up everything in my body. I kept trying to figure out what I ate that was orange.\"\nTorrence pulled even with South around that time, but South said he eventually pulled away once he rehydrated and ate a little.\nFor Torrence, who is originally from Gaithersburg, it was his 11th unsuccessful attempt to win the biggest ultramarathon title that has eluded him. He has won many of the major American races at distances longer than a marathon -- he even completed the Grand Slam of ultramarathons, winning four prestigious 100-milers in one year in 2002.\n\"I started crying about 200 meters from the finish line,\" Torrence said. \"I was hyperventilating and I told myself, 'You have to stop crying and finish this race.' \"\nAfter finishing as runner-up in last year's race, Gardner came back to win this year, beating Laura Nelson of Woodstock, Va., by three minutes even.\nGardner runs an ambitious schedule even by ultramarathoning standards. Just three weeks ago she won the Chicago Lakefront 50-Miler in just over 7:20. In September she successfully defended her national 100-mile road title (15:48:04). And despite now running with a masters (over 40) designation in events, she is still dominating women's ultramarathoning.\n\"I came back here to set a masters record, and it's a challenging race to run,\" Gardner said. \"You have a technical trail for a half marathon, then a marathon on a path, then a road race. You have to be a really well-rounded runner to do well here.\"\nSlightly fewer than 1,000 people ran in the race, now in its 42nd year, which is run over portions of the Appalachian Trail, the C&O Canal towpath and paved country roads.", "label": "No"}
+{"text": "Resorts World Doubles Its Number of Cranes (To Two)\nResorts World has become the “molasses in wintertime” of Las Vegas resort construction projects.\nWhile progress has been agonizingly slow, we have seen recent signs of activity. Specifically, Resorts World has doubled its number of construction cranes.\nNow, there are precisely two. We’ve shown you the one in back of the building, now take a gander at the one in front.\nHave you noticed nobody ever leaves a gander? Always take, take, take.\nResorts World is being built on the bones of the abandoned Echelon Place.\nWhen Echelon Place was being built, it was not uncommon to see a dozen cranes looming over the site.\nNow, not so much. Take a look.\nStill, a closer peek reveals more materials at the site’s “laydown yard,” an area where construction materials are delivered and stored until needed for installation.\nOther than that, any changes aren’t particularly visible.\nIn May 2017, it was announced “major construction” was “imminent.” Let’s just say there’s a reason certain words are in quotation marks.\nThe company behind Resorts World, Malaysia-based Genting Group, has said a lot of the work being done on its $4 billion resort involves things people can’t see, like “utility lines and working out easements.”\nWe’re pretty sure “working out easements” is a euphemism for something.\nThe fact remains the Asian-themed Resorts World is moving at a panda’s pace.\nPresumably, delays have been related to the “devaluation of Malaysia’s currency and the unavailability of construction cranes.”\nWe have to wonder if Genting, in high school, blamed the dog when it forgot to do its homework.\nIt’s time Resorts World got serious about itself. More cranes. More steel. More people in hard hats cat-calling passersby.\nBecause Vegas shines most brightly when it makes new things.", "label": "No"}
+{"text": "Very Good Pool Noodle\nPool noodle will be the important toy you should have when you want to have very good swimming pool as the place for you to have some joyful moments with lovely family. When you want to have the good and versatile backyard, you need to select the good concept for it, and having a nice swimming poo is considered as the good concept you should consider well. Perfect and complete your good swimming pool with some toys such as having pool noodle. It sounds good and it works well in your own swimming pool.\nPool noodle will be very nice as the toy to hold various interesting game with it. Swimming pool is considered as the important part in your home which can be used for several interesting game. With pool noodle, you can consider to do some playful game with joy. Then, it is very important as well for you to select the most appropriate size and color of this pool noodle to be used for playing game.\n12 Photos Gallery of: Very Good Pool Noodle\nPool noodle will be nice which will be used for several interesting games. However, if you want to have the good swimming pool design, you also need to consider well to select best colors of it. Pool noodle are offered in wider selection based on colors, size, shape and also material. Colorful pool noodle will be very nice to decor the swimming pool interestingly. Find your best pool noodle in some stores, and the photos here will be very helpful you need to check out.\npool noodle shapes", "label": "No"}
+{"text": "Serving South Apopka, FL – The Orange County Florida Nuisance Animal Organization\nOrange County, FL – There are many South Apopka Florida pest control companies, but most deal with extermination of insects. We deal strictly with wild animals, such as raccoon, skunk, opossum, and more. Our Wildlife Solutions differ from the average exterminator business because we are licensed and insured experts, and deal only with nuisance animals. We are not merely wildlife trappers, but full-services nuisance wildlife control operators, offering advanced solutions.\nSouth Apopka Florida wildlife species include raccoons, opossums, squirrels, rats, skunks several species of snakes and bats, and more. Many animals can cause considerable damage to a house, not to mention contamination. We offer repairs of animal entry points and biohazard cleanup and we guarantee our work. Our rodent (rat and mouse) control is superior to other pest management companies. The Orange County Florida Nuisance Animal Organization’s pest wildlife trapping is done in a humane manner. Of course, we are properly Florida state licensed. We are highly experienced in raccoon removal, squirrel removal, bat control, and more.\nAnimal Removal in South Apopka Orange County Florida –\nGetting Rid of Skunks\nBat Control, Removal & Exclusion\nRaccoons are nocturnal animals. They are usually black in color, and have a black tail with rings. They weigh around 10 to 20 pounds. They usually reside in forests, in barns, chimneys or even your attic. If you live near a forest, it is likely that a raccoon will one day knock over your trashcan looking a food source. They are opportunistic feeders, and so can be a real nuisance. Raccoons are omnivorous, so they feed on vegetables and poultry. There are various methods that will help you get rid of raccoons:\nFencing will help exclude the raccoons from your property to do this, set up a two-wire electric fence that is connected to a DC battery. Also make sure that you install a temporary chimney cap. Since raccoons are nocturnal, they will not be able to gain access to your chimney when you are asleep. Make sure that you use a trashcan with a tight lid. Raccoons are usually attracted by the smell of your trash. Purchase a metal or plastic trashcans, which is difficult to open. You can also put a rock on top of the trashcan to make sure that the raccoon does not knock it over. Alternatively, you could put the garbage in containers sealed with bungee cords. Make sure you double bag foods that have intense smell such as meat, fish, etc. Most pests have an acute sense of smell, and they will be attracted to your trash. You can also spray the garbage with a repellent to disguise the smell of meat.\nThis is the least preferred method. The most common is attracting the raccoon with food and trapping it in a cage or a box. However, some provinces have very strong regulations on trapping. If the province does not allow this, you could be prosecuted for violating animal rights!\nIt is also very dangerous to deal with raccoons face to face. They could be carrying germs, roundworms or rabies. You can even get leptospirosis from the raccoon feces. Another problem with this is that they are wild animals. A raccoon could decide to be defensive and hurt you.\nThis is the safest method. The Pest Control staff will deal with the vermin more effectively and without legal repercussion.\nHow Much is an Attic Restoration?\nDead Animal Removal Company\nWildlife Removal Services\nDo Skunks Attack Pets?\nIf you have previously had a problem with raccoons and squirrels, then you know what a menace varmints can be. The same is also true for bats, especially knowing the fact that bats are carriers of the rabies virus. Remember, it is illegal to use poisons to kill bats, so it will be better if you opt for bat traps. However, research has shown that bats have a tendency to return to their roosting place even if they are 150 miles away. Hence, traps may not be a permanent solution to prevent bats from making a home in your house. In such a case, it would be best to go for a permanent bat control measure which ensures that bats do not return to roost in your home.\nIf you are not comfortable adopting bat control measures, then you can even hire a professional, but be prepared to shell out a few thousands based on the size of your home, the equipment used, the time spent on fixing the holes and crevices and the material used to seal off the holes and openings. Also, before hiring the services of a professional, it is best to get an estimate.\nPrevention Of Squirrel Infestations\nBat Removal and Prevention\nPrevention Of Squirrel Infestations\nDiet: What Do Skunks Eat?\nThere are lots of deterrents advertised on the internet and in stores that supposedly will tell you how to get rid of raccoons. Very few of them if any actually work. For example moth balls do not work , nor does the urine of dogs, wolves or other animals. In fact all that they do is smell up your house even more than the raccoons do. We tried them and know from experience.\nSo how do you get rid of raccoons? Do not buy all of the things that are advertised on the internet or even in the hardware stores. In fact, traps are not even worthwhile investing in. We will explain some of the reasons why and also how to get rid of raccoons.\nOnce the raccoons are gone, be very careful repairing raccoon damage and entering attic spaces. Breathing the feces or raccoon scat can cause organ damage and death. In the dry air of your attic, these feces break down, become dust like and when disturbed will float in the air for you to breath. Hire professionals to clean up the attic if they have been there for some time. You may have to replace the insulation and the air vents over the soffits if there is a lot of damage. For more information on repairing damaged caused by raccoons and other associated topics visit our web site.\nRaccoon Feces & Urine - Do They Cause Disease?\nHow to Find and Remove a Dead Skunk\nDiseases Squirrels Can Transmit to Humans", "label": "No"}
+{"text": "After last weekend, it’s time to shake things up a bit. With one top-five team not in action and strong performances from two teams on the outside looking in, the top five needed some reshuffling.\n5. Men’s Heavyweight Crew\nThe rowers took first place in the championship eights division of the Head of the Charles Regatta, finishing perhaps the most prestigious race of the fall season in just over 14 minutes. Plus, there were free samples of everything along the banks of the river all weekend.\nOnce again, the sailing team competed in multiple races with snobbish names. The team finished fifth at the Stu Nelson Trophy regatta, 13th at the Hoyt Trophy regatta, 12th at the Ober trophy, and 8th at the BC Invitational.\nPrevious Rank: 3\n3. Women’s Tennis\nThe Crimson finished its fall season at the ITA Northeast Regional. All six Harvard participants advanced at least to the second round of the main draw, while juniors Kristin Norton and Camille Jania both played into the fourth round of singles and doubles competition before being eliminated.\nPrevious Rank: 4\n2. Women’s Soccer (10-4-1, 4-0-1 Ivy)\nAs it turns out, Harvard soccer does have something to cheer about. The women’s team is currently riding a three-game winning streak, beating Princeton last weekend to gain sole possession of first place in the Ivy League. The team plays its final home game on Saturday against Dartmouth before ending its regular season next weekend.\nPrevious Rank: Not Ranked\n1. Football (5-1, 3-0 Ivy)\nCongratulations, Coach Murphy. You have the top two performers in the Ivy League, but they both play the same position, and it’s not clear who’s better. After two consecutive record-breaking performances from junior quarterback Colton Chapple, the Crimson started a healthy Collier Winters behind center on Saturday against Princeton. He didn’t exactly disappoint in his return, throwing for 403 yards and five touchdowns and running for one more score in the Crimson’s 56-39 win. Maybe Murphy should just have Chapple and Winters pass to each other.\nPrevious Rank: 1", "label": "No"}
+{"text": "Driving down M-41 one would NEVER know Portage Health is IN FACT a HOSPITAL, with an emergency room no less, unless you are from here. What a great discovery! One would think Portage Health would place... more a SIGN on the highway advertising HOSPITAL-EMERGENCY with an arrow to turn at the light on M-41, visible to all north and south bound traffic. I thought Portage Health was a group of Dentists or a gym or something, but not a hospital. I am glad I did not have an emergency.\nI was treated horribly. The doctors or nurses did nothing for me . I am currently pregnant and went into the er and was having really bad cramps. So I wanted to get looked at. They did absolutely NOTHING... more . I sat in the er for 4 hours for a blood test and to pee in a cup for them to say there's nothing they can do. I will personally NEVER go back .\nRate of readmission after discharge from hospital (hospital-wide)\nRate - 15.1% (0.9% below the national rate)\nThere is no indicators supported for this facility. If your hospital is part of major country or region based indicators that you value, please suggest it to us via our suggestion box in the bottom left corner and we’ll consider it's integration.", "label": "No"}
+{"text": "Metalloinvest continues to supply pellets to NLMK\nAccording to the agreed terms, Metalloinvest will supply NLMK with more than 3 million tonnes of pellets this year.\nIn accordance with the contract, the pricing will be based on current market indicators, taking into account global market price trends. Lebedinsky GOK and Mikhailovsky GOK will supply the pellets to NLMK's main production site in Lipetsk.\nThe extension of the existing contract continues the long-term mutually beneficial partnership between Metalloinvest and NLMK. In 2011, the companies signed a pellet supply contract for a four-year period, which was extended in 2015.\nView count: 154", "label": "No"}
+{"text": "Jasmine based in the centre of Chorlton, Manchester is the place to go for authentic middle eastern cuisine Since opening in late 2012 they have built a large and loyal customer base - due to the high quality of their food, and the level of customer service....\nFeatured in Middle Eastern Restaurants in Manchester\nA sister company of Longmires Business Accountants Ltd, PayEme has been set up to provide a bespoke payroll service.\nFeatured in Payroll Services in Manchester\nExchange Utility is a market leading independent Energy Consultancy firm based in Greater Manchester....\nFeatured in Utilities in Manchester\nAre you looking for a recommended authentic Turkish Restaurant in Manchester?...\nFeatured in Turkish Restaurants in Manchester\nTruly a family affair the Topaz Dance centre in Manchester is owned and run by IDTA qualified Tony and Pat Savage, with the assistance of daughter Zoe and son Christopher, all of whom just “love to dance”.\nFeatured in Dance Schools and Classes in Manchester", "label": "No"}
+{"text": "Ever wanted to be half human half machine! Why not upgrade yourself with a robot body?\nDay of the Dead paper flower crown, ideal for costume + dress up ideas!\nBeautiful paper flower crown or headpiece, ideal for costume + dress up ideas!\nBe a Count with this chilling paper Vampire mask!\nMake your own papercraft London town!\nSt Patrick’s Day is here and it’s time to party!", "label": "No"}
+{"text": "GPS Receiver Market Forecast to 2028 - COVID-19 Impact and Global Analysis by Type (Differential Grade, Survey Grade); Application (Precision Farming, Mining, Defense, Construction, Oil and Gas, Others) and Geography\nReport Code: TIPRE00012250\n| No. of Pages: 150\n| Category: Electronics and Semiconductor\n| Status: Upcoming\nThe satellite GPS receiver is a tool that is utilized for navigation purposes. GPS receiver uses a portable radio receiver to pick up the speed of light from orbit satellites. NAVSTAR GPS is a highly popular satellite navigation system utilized by the U.S. Government. The U.S. Air Force operates a GPS receiver. The global navigation satellite system offers geolocation and time information to GPS receivers anywhere in the world.\nOngoing developments to enhance the overall GPS infrastructure and availability of more cost-effective GPS solutions are some of the major factors driving the growth of the GPS receiver market. Moreover, increasing technological advancements in the GPS system is anticipated to boost the growth of the GPS receiver market.\nThe Global GPS Receiver Market Analysis to 2028 is a specialized and in-depth study of the GPS receiver market with a special focus on the global market trend analysis. The report aims to provide an overview of GPS receiver market with detailed market segmentation by type, application. The global GPS receiver market is expected to witness high growth during the forecast period. The report provides key statistics on the market status of the leading GPS receiver market players and offers key trends and opportunities in the GPS receiver market.\nThe global GPS receiver market is segmented on the basis of type, application. On the basis of type, the market is segmented as differential grade, survey grade. On the basis of application, the market is segmented as precision farming (agriculture), mining, construction, oil and gas, others.\nThe report provides a detailed overview of the industry including both qualitative and quantitative information. It provides overview and forecast of the global GPS receiver market based on various segments. It also provides market size and forecast estimates from year 2020 to 2028 with respect to five major regions, namely; North America, Europe, Asia-Pacific (APAC), Middle East and Africa (MEA) and South America. The GPS receiver market by each region is later sub-segmented by respective countries and segments. The report covers analysis and forecast of 18 countries globally along with current trend and opportunities prevailing in the region.\nThe report analyzes factors affecting GPS receiver market from both demand and supply side and further evaluates market dynamics effecting the market during the forecast period i.e., drivers, restraints, opportunities, and future trend. The report also provides exhaustive PEST analysis for all five regions namely; North America, Europe, APAC, MEA and South America after evaluating political, economic, social and technological factors effecting the GPS receiver market in these regions.\nGet more information on this report :\nThe reports cover key developments in the GPS receiver market as organic and inorganic growth strategies. Various companies are focusing on organic growth strategies such as product launches, product approvals and others such as patents and events. Inorganic growth strategies activities witnessed in the market were acquisitions, and partnership & collaborations. These activities have paved way for expansion of business and customer base of market players. The market players from GPS receiver market are anticipated to lucrative growth opportunities in the future with the rising demand for GPS receiver market. Below mentioned is the list of few companies engaged in the GPS receiver market.\nThe report also includes the profiles of key GPS receiver market companies along with their SWOT analysis and market strategies. In addition, the report focuses on leading industry players with information such as company profiles, components and services offered, financial information of last 3 years, key development in past five years.\nHemisphere Gnss, Inc.\nJavad Gnss, Inc.\nLeica Geosystems AG\nNavcom Technology, Inc.\nSeptentrio Satellite Navigation NV\nSokkia Topcon Co., Ltd.\nSpectra Precision Inc.\nTrimble Navigation Ltd.\nThe Insight Partner's dedicated research and analysis team consist of experienced professionals with advanced statistical expertise and offer various customization options in the existing study.\nGet more information on this report :\nThe List of Companies\n1. Geneq Inc.\n2. Hemisphere Gnss, Inc.\n3. Hexagon AB\n4. Javad Gnss, Inc.\n5. Leica Geosystems AG\n6. Navcom Technology, Inc.\n7. Septentrio Satellite Navigation NV\n8. Sokkia Topcon Co., Ltd.\n9. Spectra Precision Inc.\n10. Trimble Navigation Ltd.", "label": "No"}
+{"text": "Offering main road exposure on Brunswick Hill.\nEntrenched in the heart of Brunswick's bridal precinct is this wonderful open plan shop laden with character.\nApproximately 120 square metres in floor area, the property offers a host of wonderful features including:\n- front display window\n- polished floorboards throughout\n- raised section at rear of property over looking front shop area\n- male/female toilets\n- off street parking for 1 vehicle\n- large public car park at rear of premises with easy walkway access\nto Sydney Road\nCURRENTLY OPERATING AS A JEWELLERY SHOP, THIS PROPERTY LENDS ITSELF TO A HOST OF OTHER OPTIONS.\nFor more details, please email agent", "label": "No"}
+{"text": "The forecasters have been threatening thunderstorms here on & off over the last 3-4 days so I've been waiting patiently for some great cloud formations. Had some interesting cloud south of us yesterday and today we had a short & sweet thunderstorm and these are the photos I managed to capture.\nand the rain ... came tumbling down\nLoving the little twisty cloud\nJust had to take this one, the sun was highlighting the birds flying across the very dark & foreboding sky!", "label": "No"}
+{"text": "Create your list\nBrowse from thousands of movies and shows.\nWe send out your disc the next business day.\nWatch and repeat\nFree returns, plus no due dates or late fees.\nLearn how to overcome everyday aches and pains stemming from your back, neck and bad posture. Moira Merrithew, an internationally renowned Pilates expert, helps viewers stand strong and tall with exercises that correct posture and lengthen the spine. By stretching and strengthening the muscles in your core and back, you'll significantly reduce pain and improve the quality of your life.", "label": "No"}
+{"text": "Scans your local area network, automatically builds a graphical network graph.\nCreates professional-looking network diagrams in minutes.\nSoft Comfort, Inc.\nIt enables you to delete Skype messages on all devices permanently.\nKONICA MINOLTA BUSINESS TECHNOLOGIES, INC.\nPageScope Network Setup lets you add new bizhub devices to your network.\nOki Data Corporation\nIt provides a way to manage, configure, monitor, and upgrade all OKIMFP devices.\nNetwork Notepad is an application that allows you to create network diagrams.\nAirTies Wireless Networks\nSetup, connect, manage and guard your home network.\nIntegrate it to other applications as an activeX control to create diagrams.\nSOFT & ARTS ( Crypto Chat 4 Skype)\nAllows users to have secure, encrypted conversations over the Skype network.\nDEK Software International\nGenerates a network map, which speeds up access to remote hosts' properties.\nChat and make audio/video calls with your friends.\nIt helps you to setup a network cell without cables or a complicated setup.\nNetwork Diagram - Your detailed view of networking activity\nfor Windows. Control shared files usage....\nNetpict is a free network diagram tool developed for students, teachers.\nLinksys, a Division of Cisco Systems, Inc.\nLinksys EasyLink Advisor (LELA) helps you setup your network easily.\nA tool for connecting network cameras in Skype, Webex, and other apps.\nHost Engineering, Inc.\nIt can be used to setup your Ethernet Remote I/O network.\nPanasonic Corporation of North America\nIt is the exclusive setup tool for the Network Disk Recorder WJ-ND300 (A).\nGriffith Data Systems\nQuickCopy is a utility written to setup student folders on a campus network.\nThe MFP setup tool can discover devices over USB or network connections.\nUtility to discover and setup network connected software defined radios.", "label": "No"}
+{"text": "Are you ready to embark on a journey where email sorcery meets visual wizardry? Today, we delve into the magical world of email marketing visuals, uncovering the secrets to crafting the perfect visual experience that will mesmerize your audience!\n1. The Enchanting Power of Imagery:\nLet’s face it: a plain, text-only email can be as captivating as a dusty old spellbook. To truly bewitch your recipients, conjure up some captivating visuals that tell a spellbinding story. From mesmerizing photographs to captivating illustrations, these visual elements have the power to transport your readers to a realm of enchantment.\n2. Choosing the Right Potions: Color and Composition:\nColors can be your key to unlocking the magic within your emails. Think beyond the ordinary and experiment with vibrant hues that evoke emotions and elicit a response from your audience. Remember, while each hue has its own magical qualities, when combined skillfully, they can cast a powerful spell of visual harmony.\nWhen it comes to composition, ensure your visuals are arranged in a seamless manner, guiding your readers’ eyes through the email. Employ the rule of thirds, create focal points, and allow negative space to breathe life into your designs. This will take your email sorcery to a whole new level.\n3. Unleashing the Power of Animated Spells:\nDo you want an email that dances with the grace of a ballerina or sparkles like a wand casting spells? Animated visuals are the enchanting elixir that can captivate your audience’s attention like never before. Be it subtle motion graphics or mesmerizing GIFs, these bewitching creations will leave a lasting spell on your readers.\n4. Summoning the Right Stock Ingredients:\nNo magic potion is complete without the perfect ingredients. Just like a skilled wizard, you need to choose the right stock visuals that can add the crucial touch to your emails. Luckily, in the vast realm of stock photo websites, you’ll find an infinite selection of images to inspire and fulfill your creative cravings.\nRemember, the secret to email sorcery lies in finding the perfect blend of visuals, colors, animations, and stock imagery. Unleash your creativity and embark on a magical journey where your emails bewitch, charm, and leave a lasting spell on your recipients.\nAre you ready to master the art of email magic?\nUntil next time, fellow sorcerers!", "label": "No"}
+{"text": "Sci fi/Fantasy image byMari Falstein\nSince i wasnt totally satisfied with how i did the first Predator dragon, i decided to try it again, this time with solid lines. I like how this one turned out.\nPublished More than a year ago\nBe the first to favourite this image.\nThis image is flagged as NSFW", "label": "No"}
+{"text": "Wallpaper., ''#STUPiDFACEDD'' The episode:\n''Situation Problems'' (411) The hook: Jersey\n's resident ''Blast in a Glass'' Deena Nicole Cortese was on fire with desire on Oct. 20. Desperate to ''do sex'' with DJ Pauly D, she took to da club and got crazy-wasted in hopes that her inhibitions would rub off on Pauly. Wallpaper.'s electro-pop club thumper hilariously underscored Deena's epic fail at sobriety and love, and lyrics like ''Super Soaker filled with Four Loker, plus SoCo, real gross, yo'' matched Deena's own verbal poetry as she lobbed one come-on after another at her uninterested housemate. Watch it!\nDeena barrels toward her ''white girl wasted'' nadir at 6:11 on MTV.com\n, and see what philosophical meaning Darren Franich derived from it all in his recap", "label": "No"}
+{"text": "Happy birthday, Steve\nWell, it was actually last Sunday. But we got to have our celebration yesterday.\nI warned him in advance that I’d had a cold and I wasn’t sure if I was still contagious or not, giving him the opportunity to pass until next week. But he said no way, we’re on. At least I can say I tried to be considerate, right? 😉\nNo exotic adventures yesterday; I baked him some brownies (from scratch) and got a card, and asked what he’d like to do. He surprised me; his desire, along with our usual spanking play, was to mess around with his camera a bit and take some artsy shots. (Artsy? Read: naked.) So after a nice long warm-up OTK (side note: ever notice that spanking hurts more when you’re sick? I did), I stripped and we played a bit with angles and lights and positions. After he left, I took some of the ones I liked and fiddled with them a bit further in my photo-editing software, playing with the special effects.\nI kinda like this one:\nAnd this one, once cropped, turned out to be a good “post-facelift” shot:\nI posted the uncropped version on FetLife, and the cropped version on Facebook. Because multi-tasking.\nNever fear, there was plenty of play. Oh, and did you know that playing with a cold makes your sinuses really come alive? Hence my clutching tissues through the entire scene, as witnessed here in my left hand:\nSo very attractive. Snot is not hot. But I guess he wasn’t looking at my nose anyway.\nHope you had a very happy birthday, my wonderful top. ♥\nAnyway, it’s Wednesday and I have not worked out for a week. I’m going to attempt a little bit of exercise today and keep my fingers crossed that I don’t cough up a lung. Wish me luck.", "label": "No"}
+{"text": "January - March\nPorsche with strong partners in Geneva\nWorld Endurance Championship (WEC) and the Le Mans 24 Hours\nFriedrich Enzinger, Vice president LMP1, said: “We are very proud of this partnership for our challenging WEC project.” Dr. Rüdiger Kapitza, Chairman of the\nThe DMG MORI range of products includes innovative high-tech machines and services, as well as software and energy solutions. The machine tools segment is DMG MORI’s core business. The company’s global presence includes 21 manufacturing and 146 sales and service locations.\nThe DMG MORI logo is a prominent eye catcher on either side of the car’s huge fin and, as well as that, it is present on the car’s nose cone, the front spoiler and below the headlights.\nThe Swiss watch manufacturer Chopard stands for “Passion for Excellence”, which perfectly matches qualities shared by\nThe history of Chopard began in 1860 with the precise timing devices produced by Louis-Ulysse Chopard in Sonvillier, right in the heart of the Swiss Jura region. Since 1937 the company has been based in Geneva. In 1963 Karl Scheufele from Pforzheim, Germany, became the owner of Chopard, which remains up until today a family-run business. His children, Caroline and Karl-Friedrich, are its current co-presidents. The symbiosis of sportiness and perfect time keeping have lead to a great passion for racing which has been represented in the brand’s portfolio since 1988, the year when the “Mille Miglia” model was launched. Further information from: www.chopard.com\nLive stream of the press conference 04, March 2014: 08:20 am,", "label": "No"}
+{"text": "2021 Festive Sales\n- 1 New product added to the catalog everyday!\n- All sales are valid till 31st December 2021.\n- Immediate payment upon checkout is required.\n- Promotion is available world wide to all shipping destinations!\n- Kindly note that we only ship using DHL Express service.\nSorry, there are no products matching your search.", "label": "No"}
+{"text": "HANDWOVEN WITH WOODEN\n2in1 Peshtemal and Towel -PeshTerry-\nUse tab to navigate through the menu items.\nOur Recent Posts\nPESHCRAFT KNOWS STYLE\nNot just about peshtemals but the ideas that will improve your interior designs. To help you life in your top place which is of course your Home.", "label": "No"}
+{"text": "Rochester castle was one of the first to be built of stone and at 125 feet is the tallest keep in England.\nIt was constructed by the Bishop of Rochester in around 1090 in the angle of the Roman town wall. The four-squared towers were added by Archbishop William de Corbell in 1127. The site was jealously guarded by the see of Canterbury until the end of the 12th century.\nIn 1215 Archbishop Langton failed to follow King John's order to hand over the castle to the Bishop of Winchester, a close supporter of the King. The result was one of the best recorded sieges of the Middle Ages. King John personally besieged the castle for two months but his great stone throwing machines had little affect. He was forced to resort to undermining the walls using pig fat as fuel. Although a whole section of the wall collapsed the inhabitants retreated behind a great cross-wall and refused to surrender until forced by starvation.\nThe castle was restored but damaged again in a siege of 1264. It was repaired by Edward III and improved by Richard II.\nHowever since that time it was allowed to decay.\nIn the 18th century plans to demolish the castle were not carried out and thus it remains to the present day.", "label": "No"}
+{"text": "- Randy Orton hits the ring, and goes to explain why he did what he did to Xavier.\n- He says Kofi is stupid, over and over again. Every time Orton gives him a chance, Kofi fails.\n- Kofi's music hits, and Kofi shows up behind Orton and lands Trouble in Paradise.\n- Kofi goes to Pillmanize Orton, but Revival come out and eat chairs instead.\n- WWE is doing a disservice to this angle if they don't mention The Revival broke Kofi's leg years ago.\nKing of the Ring Opening Round\nAndrade (w/ Zelina) defeated Apollo Crews\n- Apollo Crews cracks Andrade with a big clothesline and catches him with a mid-air dropkick.\n- Andrade got double knees and sent Apollo into the stairs.\n- During the commercial, they go back and forth. We're welcomed back with a pop-up gutbuster for Apollo, though.\n- There's a strike exchange that gets the crowd hot for Apollo's standing star press. He is not 50 or 60 pounds heavier than Ricochet as commentary claims.\n- Zelina interference and Andrade Hammerlock DDT get it done.\n- This almost hit recommended viewing because the crowd got hot, but too much was in a commercial.\nMoment of Bliss\n- Charlotte Flair asked to be on the show and jokes that the throne is more fitting for her.\n- Charlotte trashes Bayley.\n- Bayley comes out with a pretty mediocre promo.\n- Charlotte says she has to clean Bayley's mess and win the title at Clash of Champions. Bayley accepts the challenge.\n- Bayley pushes Charlotte off her chair.\n- I'm fine with Bayley and Charlotte, but they really have to make some more top stars that can work and treat them like stars.\nBuddy Murphy defeated Daniel Bryan (w/ Rowan)\n- Reigns wants to know if Murphy is telling the truth or not, and Murphy THOUGHT he saw Rowan. Reigns say she'll kick Murphy's ass if he's lying.\n- Bryan calls Murphy a liar and isn't happy with him.\n- Murphy immediately cracks Bryan with the big knee.\n- We go to commercial, and we really shouldn't have this early.\n- LeBell Lock applied after a dropkick. Murphy struggles, but gets out.\n- Buddy counters Yes Kicks with a wheel kick, but falls victim to a tree of woe. A belly-to-back superplex follows. It's a mean one.\n- Murphy turns things up with a Cheeky Nandos kick and running powerbomb that spices up the match.\n- Murphy backslide, knee and kick to the face and brainbuster ALMOST get it done, but Bryan's foot is on the ropes.\n- Murphy kicks Rowan and hits Murphy's Law on Bryan for the win!\n- Another great one out of Buddy Murphy.\n- Bryan and Rowan attack Murphy backstage and Claw Slam him.\nThe Revival defeated Heavy Machinery\n- The Revival cut a promo about New Day being cowards. I think they do well, but I don't like the \"all you people\" aspect of it.\n- The Revival challenge New Day to a Smackdown Tag Team Title match.\n- Heavy Machinery come out and take over pretty early. Another match, another commercial\n- The Revival take over during the commercial until Otis gets the hot tag.\n- They capitalize on the distraction and Revival pick up a roll up win.\n- Harmless tag match that establishes Revival as contenders.\n- Chad Gable says he understands why he's the underdog in the tourney. Shelton Benjamin is behind him and puts a \"short joke\" sign on the door.\nKing of the Ring Opening Round\nElias defeated Kevin Owens\n- Elias finds Drake Maverick and John Cone, and shows Drake that the 24/7 Title rules have been suspended so he can focus on King of the Ring. Elias is so good.\n- Shane McMahon brought Kevin Owens into his office to say what's on his mind. Owens tries to level with Shane McMahon about what $100,000 means to him.\n- I'm glad WWE is making money a factor in a storyline. For too long, \"Superstars\" would be portrayed as above worrying about money. Which makes you wonder why so many people are working in the first place.\n- Shane tells Owens to apologize, which Owens does.\n- New Elias theme? What the hell is this?\n- Owens hits a Cannonball and German Suplex, and Shane McMahon comes out. What da hail.\n- We come back to see Elias get a big knee.\n- This crowd is dead. They didn't need a chinlock at 9:55 PM EST.\n- Elias impressively hits a spinning sitout powerbomb and gets his knees up on a senton attempt.\n- Shane McMahon trolls KO again, and reveals he's wearing a ref shirt.\n- Owens almost runs into Shane, who fast counts him.\n- Sami Zayn comes out and says he doesn't care about this show but needed TV time.\n- Zayn brings out Nakamura, who he is apparently managing now.\n- Sami Zayn managing Shinsuke Nakamura is something that I didn't realize I needed.\n- Zayn says Nakamura is an artist who is tired of being misunderstood, and that won't happen anymore.\n- They attack the Miz, and a new partnership is born.\nKIDNAPPING OR SOMETHING.\n- Backstage, Rowan and Daniel Bryan bring some guy with a hood over his face backstage.\n- After they beat down Murphy, they harass the dude again.\n- Roman is backstage with them at the end of the show.\n- Bryan reveals a guy who looks just like Rowan as the person who attacked him. This was kinda hilarious.\n10- Perfect, 9- MOTY Territory, 8- Excellent, 7- Great, 6- Good, 5- Average to above average, 4- Slightly below average, 3 or below: Poor\nEach match starts at a 5 and slides up and down based on entertainment, execution, time, environment, reaction and stakes. The ratings are in no way an indication of a \"star rating,\" which is a completely different system. A standard, non-offensive \"TV match\" lands at a 5. The gap between 5.75-6 is generally the largest, with anything reaching 6 being recommended viewing.\nThese are opinions, and incredibly inconsistent ones. Don't take them too seriously, and have (and share) your own!", "label": "No"}
+{"text": "Liposuction in Houston and The Woodlands\nThere have been many exciting advances in liposuction techniques over the last several years that have enhanced both the quality and safety. Current techniques have made it very safe, and liposuction is still the most common plastic surgery procedure performed worldwide, and for good reason. Liposuction makes it possible to remove fat cells from nearly any part of the body without leaving long excision scars. It can be used to unveil the beautiful underlying physique, or to create a defined or contoured appearance.\nWhat is Special\nDr. Linville utilizes the most current liposuction techniques but never compromises safety. Liposuction requires exquisite attention to detail, a lot of training, and consistent assessment of results. There are many nuances to achieving the desired results and optimal contouring, all while minimizing scars. Rest assured that Dr. Linville will utilize all of these tricks during your surgery. Additionally, Dr. Linville does some amount of lipocontouring in nearly every surgery to help enhance your aesthetic result.\n- High-definition liposuction or body etching – the most current evolution in liposuction techniques, etching requires the upmost attention to detail and constant refinement of technique. It can be used to create the appearance of abdominal wall muscles, enhance the definition of the arm muscles like the biceps and triceps, or similarly the quadriceps muscles. Dr. Linville has taken the concept of high-definition liposuction and applied it to all of his cosmetic body procedures, such as tummy tucks, arm lifts, and thigh liposuction.\n- Energy-assisted liposuction – VASER and Ultrasound liposuction are both energy devices that Dr. Linville uses in some circumstances to help with etching or in contouring. Theoretically, the heat from these causes the underlying tissue to contract and helps the overlying skin shrink up and prevents it from sagging or drooping. It can also facilitate liposuction on more fibrous areas like the back and lateral thighs.\n- Excision-site liposuction – Even in cases where there is a planned skin excision such as during a brachioplasty, thighplasty, or abdominoplasty, performing some liposuction on the area to be excised can greatly facilitate the surgery itself by defining the plane for dissection and preserving sensory nerves that can otherwise take time to dissect out. This technique also helps achieve an unmatched result when closing incisions by helping the tissue depths match up.\n- Superficial liposuction – traditionally, liposuction was performed only in the deep layers of the fat. As high-definition liposuction has evolved, so too has the ability to safely perform liposuction in the superficial fat layer. This technique is certainly more risky for causing contour defects and decreasing blood flow to the skin, and should only be done by an absolute professional experienced with the nuances. However, when combined with proper deep-plane lipo, it can further increase the results and contour of the target area.\n- Abdomen – Abdominal contouring and etching can be done alone, but is often combined with an abdominoplasty. Dr. Linville uses a technique developed in Brazil by Dr. Saldanha known as a lipoabdominoplasty. Liposuction is performed on the entire abdomen with this technique, in contrast to just the flanks with the older method. This yields an improved contour compared to a traditional tummy tuck, and can show off the waist and help develop the desired hour-glass figure.\n- Neck – submental liposuction is a common technique used to remove unwanted fat deposits below the chin. Liposuction in this area is also used to define the jawline and is frequently combined with a necklift procedure. VASER or SmartLipo is often used to try to help the skin retract in this area to prevent the need skin excision.\n- Arms – Liposuction on the upper arms is growing in popularity, thanks to energy-assisted techniques and the development of sculpting and hi-definition techniques. The outer triceps groove and biceps muscles can be developed in the same fashion as the abdominal muscles when etching the rectus muscle. Dr. Linville routinely performs excision site lipo during a brachioplasty as well.\n- Thighs – The natural slope to the leg, from the inguinal region to the medial thigh can be sculpted and gives an extremely beautiful contour when done properly. Excess fat in the lateral hips, and the inner thighs and on the medial knees can also undergo liposuction to aid in contouring. For larger body contouring procedures and medial thigh lifts, liposuction also aids in excising extra skin than would be possible otherwise.\n- Mons – Along with the tummy, the mons can also develop unwanted and undesirable fat deposits that make it bulge and possibly droop. Liposuction, often combined with a monsplasty, can dramatically improve the appearance and provide a lift that refreshes the mons and labia and gives it back a more youthful look.\n- Back – The back also has some special considerations when doing liposuction, namely to not cross the midline and to avoid liposuction of the upper buttock to help define and sculpt that curve, rather than blunt it. Back skin and fat can be very fibrous, and Dr. Linville often uses VASER both to assist with fat removal and to help prevent the need for large incisions on the back.\nDr. Linville strongly believes that liposuction techniques, when done properly, can give exceptional aesthetic results for both isolated liposuction cases and also when combined with other surgeries. Liposuction is not something to be taken lightly or to be overlooked. In fact, it is most often the most critical part of any plastic surgery procedure, which is why Dr. Linville spends time and uses considerable focus when performing it. If Dr. Linville suggests liposuction as an adjunct to your procedure, you can trust that it is because he thinks it will take great results and make them phenomenal.\nUse in Fat Grafting\nLiposuction is the initial step during any procedure involving fat grafting, whether it be for the face, breast, buttock, or even for revisions to fix contour deformities. There are certain considerations when doing fat grafting that Dr. Linville will utilize to help maximize fat survival and still yield excellent liposuction results.\nIt all begins with a consultation and discussion about what technique will best serve you based on your goals and anatomy. Dr. Linville is very forthright in his assessment, and he will be honest with you regarding the results he anticipates for you, along with potential risks. Dr. Linville will perform your liposuction procedure to the absolute maximum in all facets, while trying to preserve blood flow to the skin. It is a delicate balance, and this is why you want to trust a board-certified Plastic Surgeon who is an expert at liposuction.\nA surgical garment is placed after your surgery, and various pain medication is utilized to minimize pain, which is highest in the first 3-4 days after surgery and decreases steadily afterwards. Compression garments are absolutely critical to achieving good results and helping the skin retract while helping to minimize swelling. Some mild pain and swelling typically persists for a couple of weeks, with final results typically achieved by three months.\nWhen Lipo alone will not work\nAside from a contour deformity, which is the most common complication after liposuction, the reason liposuction alone will not work in some patients is if there will be too much skin laxity after the fat has been removed. As the underlying fat is suctioned, the skin envelope deflates, and this can lead to a sagging, deflated appearance to the skin that looks worse than where you started. This is, in fact, the exact way Dr. Linville analyzes your options. The first and best option is typically liposuction, and if Dr. Linville is concerned for skin sagging (although sometimes it is obvious), he will then recommend a skin excision procedure such as abdominoplasty, mini abdominoplasty, brachioplasty, neck region, etc.\nSchedule an Appointment\nDr. Linville would love to help you reach your ultimate aesthetic goals. If you are interested in any kind of liposuction procedure contact our office today.", "label": "No"}
+{"text": "This one is border-line for whether it belongs here, but I think SO is the best place to ask.\nApple has pretty consistently warned that any iDevice you flag for development in Xcode should NOT be used for regular day-in/day-out use. It should be an 'extra' phone/tablet you've set aside for development/testing purposes only.\nBut is this really the case? As long as I'm not running beta OS builds, is there any harm to using my only iPad (which my wife needs to use as well) for development?\nI'd rather not have to buy a second iPad if I don't have to, but I also don't want to cause any problems...", "label": "No"}