Question: What do I hope to go away for the pan?

Like this breakfast pancake. Fun to make and something that's easy to learn trial and error. I did 1/4 turns spooning a little more batter and letting them set. You just have to make sure the last done edge is touching the batter at the finish. I was able to get the round shape this way but there may more than to it than that. I just started cooking with it yesterday. I would like them more airy. The only minus star to the cast iron pan is the almost diesel like smell no kidding that comes from the pan once it gets very hot. Lodge has a small plain skillet for about the same price without that chemical odor. I don't think it's necessary to skimp on the seasoning technique, which I feel is the problem. Hopefully it'll go away and I do like this pan and recommend it but with reservations.

Answer: diesel like smell

Like this breakfast pancake. Fun to make and something that's easy to learn trial and error. I did 1/4 turns spooning a little more batter and letting them set. You just have to make sure the last done edge is touching the batter at the finish. I was able to get the round shape this way but there may more than to it than that. I just started cooking with it yesterday. I would like them more airy. <hl> The only minus star to the cast iron pan is the almost diesel like smell no kidding that comes from the pan once it gets very hot. <hl> Lodge has a small plain skillet for about the same price without that chemical odor. I don't think it's necessary to skimp on the seasoning technique, which I feel is the problem. Hopefully it'll go away and I do like this pan and recommend it but with reservations.

Like this breakfast pancake. Fun to make and something that's easy to learn trial and error. I did 1/4 turns spooning a little more batter and letting them set. You just have to make sure the last done edge is touching the batter at the finish. I was able to get the round shape this way but there may more than to it than that. I just started cooking with it yesterday. I would like them more airy. The only minus star to the cast iron pan is the almost <hl> diesel like smell <hl> no kidding that comes from the pan once it gets very hot. Lodge has a small plain skillet for about the same price without that chemical odor. I don't think it's necessary to skimp on the seasoning technique, which I feel is the problem. Hopefully it'll go away and I do like this pan and recommend it but with reservations.


Question: Who did the the requester contact after the second cup was received, to report the problem?

I love the Copco Cup. I've had mine for about two years now and I just ordered a second. They are sturdy and as a bonus can go straight in the microwave. The lid can be a little picky, but as an adult it's as simple as putting the lid down and screwing it on tight. A child might have an issue, but then again the hole in the lid would create a mess for children too. My other cups cannot go in the dishwasher which is super irritating, but this cup cleans up in a snap and does not hold on to smells from coffee, tea or cocoa.**Update: I've purchased another Copco Cup and I had horrible problems with it. The lid simply would not stay put. I contacted the company and they kindly sent me another cup at no charge. They were so nice! The only problem is the new cup doesn't work either. For some reason this specific cup does not seem to want to keep its lid closed. The older version works fine, but the newer version with the plastic ring in the lid doesn't work at all. I contacted Copco again and they were willing to either send me a different cup or refund my money. I opted for the refund and will be purchasing a different cup altogether.

Answer: contacted the company

I love the Copco Cup. I've had mine for about two years now and I just ordered a second. They are sturdy and as a bonus can go straight in the microwave. The lid can be a little picky, but as an adult it's as simple as putting the lid down and screwing it on tight. A child might have an issue, but then again the hole in the lid would create a mess for children too. My other cups cannot go in the dishwasher which is super irritating, but this cup cleans up in a snap and does not hold on to smells from coffee, tea or cocoa.**Update: I've purchased another Copco Cup and I had horrible problems with it. The lid simply would not stay put. <hl> I contacted the company and they kindly sent me another cup at no charge. <hl> They were so nice! The only problem is the new cup doesn't work either. For some reason this specific cup does not seem to want to keep its lid closed. The older version works fine, but the newer version with the plastic ring in the lid doesn't work at all. I contacted Copco again and they were willing to either send me a different cup or refund my money. I opted for the refund and will be purchasing a different cup altogether.

I love the Copco Cup. I've had mine for about two years now and I just ordered a second. They are sturdy and as a bonus can go straight in the microwave. The lid can be a little picky, but as an adult it's as simple as putting the lid down and screwing it on tight. A child might have an issue, but then again the hole in the lid would create a mess for children too. My other cups cannot go in the dishwasher which is super irritating, but this cup cleans up in a snap and does not hold on to smells from coffee, tea or cocoa.**Update: I've purchased another Copco Cup and I had horrible problems with it. The lid simply would not stay put. I <hl> contacted the company <hl> and they kindly sent me another cup at no charge. They were so nice! The only problem is the new cup doesn't work either. For some reason this specific cup does not seem to want to keep its lid closed. The older version works fine, but the newer version with the plastic ring in the lid doesn't work at all. I contacted Copco again and they were willing to either send me a different cup or refund my money. I opted for the refund and will be purchasing a different cup altogether.


Question: What well known brand does the user compare this product to when it comes to it's "non-stick properties?

This is my first Tamago Pan so I can't really be fair when I say it's awesome. I'm comparing it to my round omelette pan I was using prior which wasn't hard but this makes the tamago rectangles perfect. It's smaller than eggspected but I still love it. The strips I cut don't reach the end of a seaweed sheet for sushi rolls so I have to use two.It's not completely non stick like a TFal or other brand names of teflon, but with a brush or some oil and it's just the same.If you haven't already looked I have posted pictures to show size and my first tamagos made.

Answer: TFal

This is my first Tamago Pan so I can't really be fair when I say it's awesome. I'm comparing it to my round omelette pan I was using prior which wasn't hard but this makes the tamago rectangles perfect. It's smaller than eggspected but I still love it. The strips I cut don't reach the end of a seaweed sheet for sushi rolls so I have to use two. <hl> It's not completely non stick like a TFal or other brand names of teflon, but with a brush or some oil <hl> and it's just the same. If you haven't already looked I have posted pictures to show size and my first tamagos made.

This is my first Tamago Pan so I can't really be fair when I say it's awesome. I'm comparing it to my round omelette pan I was using prior which wasn't hard but this makes the tamago rectangles perfect. It's smaller than eggspected but I still love it. The strips I cut don't reach the end of a seaweed sheet for sushi rolls so I have to use two.It's not completely non stick like a <hl> TFal <hl> or other brand names of teflon, but with a brush or some oil and it's just the same.If you haven't already looked I have posted pictures to show size and my first tamagos made.


Question: how long has the user owned this product?

I've been using these trays for about 3 months so far and have not noticed any chemical odor on the tray or the ice cubes. The cubes do have to be pushed out of the tray one by one, and placing the filled trays into the freezer can be challenging if you don't put a small baking sheet or Tupperware lid under them.That being said, even though I have a ice maker with ice through the door, I still use these trays because the cubes look cooler, and more importantly, they last significantly longer than my ice makers "cubes" (more like wedges). If you're willing to spend some time getting them into the freezer and out of the trays then these are well worth what you pay.

Answer: 3 months

<hl> I've been using these trays for about 3 months so far and have not noticed any chemical odor on the tray or the ice cubes. <hl> The cubes do have to be pushed out of the tray one by one, and placing the filled trays into the freezer can be challenging if you don't put a small baking sheet or Tupperware lid under them. That being said, even though I have a ice maker with ice through the door, I still use these trays because the cubes look cooler, and more importantly, they last significantly longer than my ice makers "cubes" (more like wedges). If you're willing to spend some time getting them into the freezer and out of the trays then these are well worth what you pay.

I've been using these trays for about <hl> 3 months <hl> so far and have not noticed any chemical odor on the tray or the ice cubes. The cubes do have to be pushed out of the tray one by one, and placing the filled trays into the freezer can be challenging if you don't put a small baking sheet or Tupperware lid under them.That being said, even though I have a ice maker with ice through the door, I still use these trays because the cubes look cooler, and more importantly, they last significantly longer than my ice makers "cubes" (more like wedges). If you're willing to spend some time getting them into the freezer and out of the trays then these are well worth what you pay.


Question: How long is the warranty?

This review is specific to the 2.5" Lucid by LinenSpa Gel Infused Ventilated Memory Foam Mattress Topper with Removable Bamboo Cover 3-Year Warranty. I have arthritis in my shoulders and hips and would wake up in the middle of the night aching to the point I would just get up and move around. And this was sleeping on a good quality pillow top mattress. I added this topper and I am not kidding you, my aches and pains are now gone and I'm sleeping much much better. I give this thing TWO THUMBS UP. Okay, that's the good news. Other considerations: There is a smell to it. However, I unfolded it and left it on top of my pool table for a month because I was traveling. When I got back, the smell was mostly gone and there's no problem with smell now. So if you get it and have problems with the smell then don't be in a hurry, let it air out and breath for a few weeks before you use it. Another issue you might wonder about is how this might affect sex. Yes, sex, there I said it. This topper does indeed dampen movement. Again, two thumbs up!

Answer: 3-Year

<hl> This review is specific to the 2.5" Lucid by LinenSpa Gel Infused Ventilated Memory Foam Mattress Topper with Removable Bamboo Cover 3-Year Warranty. <hl> I have arthritis in my shoulders and hips and would wake up in the middle of the night aching to the point I would just get up and move around. And this was sleeping on a good quality pillow top mattress. I added this topper and I am not kidding you, my aches and pains are now gone and I'm sleeping much much better. I give this thing TWO THUMBS UP. Okay, that's the good news. Other considerations: There is a smell to it. However, I unfolded it and left it on top of my pool table for a month because I was traveling. When I got back, the smell was mostly gone and there's no problem with smell now. So if you get it and have problems with the smell then don't be in a hurry, let it air out and breath for a few weeks before you use it. Another issue you might wonder about is how this might affect sex. Yes, sex, there I said it. This topper does indeed dampen movement. Again, two thumbs up!

This review is specific to the 2.5" Lucid by LinenSpa Gel Infused Ventilated Memory Foam Mattress Topper with Removable Bamboo Cover <hl> 3-Year <hl> Warranty. I have arthritis in my shoulders and hips and would wake up in the middle of the night aching to the point I would just get up and move around. And this was sleeping on a good quality pillow top mattress. I added this topper and I am not kidding you, my aches and pains are now gone and I'm sleeping much much better. I give this thing TWO THUMBS UP. Okay, that's the good news. Other considerations: There is a smell to it. However, I unfolded it and left it on top of my pool table for a month because I was traveling. When I got back, the smell was mostly gone and there's no problem with smell now. So if you get it and have problems with the smell then don't be in a hurry, let it air out and breath for a few weeks before you use it. Another issue you might wonder about is how this might affect sex. Yes, sex, there I said it. This topper does indeed dampen movement. Again, two thumbs up!


Question: What kind of coffee basket does the reviewer have?

The only reason I failed to give 5 stars the fikters are a little too large for my Bunn Coffee basket. Otherwise I am thrilled to have found the filters.

Answer: Bunn

<hl> The only reason I failed to give 5 stars the fikters are a little too large for my Bunn Coffee basket. <hl> Otherwise I am thrilled to have found the filters.

The only reason I failed to give 5 stars the fikters are a little too large for my <hl> Bunn <hl> Coffee basket. Otherwise I am thrilled to have found the filters.


Question: How many templates come with the product?

This double curved shower rod looks amazing. The finish appears to be a very good quality. It came with very good quality drywall anchors. I was lucky and had wood studs in just the right place so I didn't use the included hardware, but I put the anchors into my tool box for later use. The instruction sheet has two templates to help you drill all the mounting holes in the correct place. I consider myself a very handy DIY'er, however I did need to recruit an extra pair of hands just to help hold things in place during the installation.Before you install this yourself I would recommend that you temporarily install your shower curtain on the rod and hold this in place to help you install the rod in it's perfect place. I am not completely happy with the length that my shower curtain hangs in the tub now, but it's such a pain to re-install the curtain that I'll deal with it for a while.

Answer: two

This double curved shower rod looks amazing. The finish appears to be a very good quality. It came with very good quality drywall anchors. I was lucky and had wood studs in just the right place so I didn't use the included hardware, but I put the anchors into my tool box for later use. <hl> The instruction sheet has two templates to help you drill all the mounting holes in the correct place. <hl> I consider myself a very handy DIY'er, however I did need to recruit an extra pair of hands just to help hold things in place during the installation. Before you install this yourself I would recommend that you temporarily install your shower curtain on the rod and hold this in place to help you install the rod in it's perfect place. I am not completely happy with the length that my shower curtain hangs in the tub now, but it's such a pain to re-install the curtain that I'll deal with it for a while.

This double curved shower rod looks amazing. The finish appears to be a very good quality. It came with very good quality drywall anchors. I was lucky and had wood studs in just the right place so I didn't use the included hardware, but I put the anchors into my tool box for later use. The instruction sheet has <hl> two <hl> templates to help you drill all the mounting holes in the correct place. I consider myself a very handy DIY'er, however I did need to recruit an extra pair of hands just to help hold things in place during the installation.Before you install this yourself I would recommend that you temporarily install your shower curtain on the rod and hold this in place to help you install the rod in it's perfect place. I am not completely happy with the length that my shower curtain hangs in the tub now, but it's such a pain to re-install the curtain that I'll deal with it for a while.


Question: What's the highest the super-fast scroll goes to?

Viewing angle really bad, have to be pretty much directly in front to read. There is no way to clear, as far as I can tell, but it's not a big deal because you can just hold the minute button in and it will do the super-fast scroll to 99 then to zero to start over. Basic, very easy to use, good magnet on it. Small size, about credit card, and very thin too. Alarm is mild, wouldn't hear from other room or with much noise.

Answer: 99

Viewing angle really bad, have to be pretty much directly in front to read. <hl> There is no way to clear, as far as I can tell, but it's not a big deal because you can just hold the minute button in and it will do the super-fast scroll to 99 then to zero to start over. <hl> Basic, very easy to use, good magnet on it. Small size, about credit card, and very thin too. Alarm is mild, wouldn't hear from other room or with much noise.

Viewing angle really bad, have to be pretty much directly in front to read. There is no way to clear, as far as I can tell, but it's not a big deal because you can just hold the minute button in and it will do the super-fast scroll to <hl> 99 <hl> then to zero to start over. Basic, very easy to use, good magnet on it. Small size, about credit card, and very thin too. Alarm is mild, wouldn't hear from other room or with much noise.


Question: What type of surface does it have?

I bought this to help with space in some deep cabinets. I purchased it in three sizes, the 9-1/2", the 12" and the 16". All are great. They are non-slip. They have a non-slip surface on the top, but they also have it on the bottom, so they stay where you put them in your cupboard. The movement is very smooth. I put quite a bit of weight (flour, sugar, box mixes) on the 16" and it turns just great. I wish I had bought more when I ordered these, but I will order more. They are hard plastic, so they may be best for inside the cupboard rather than a formal dining table. I recommend these if you are looking for a smooth operating turntable.

Answer: non-slip

They are non-slip .

I bought this to help with space in some deep cabinets. I purchased it in three sizes, the 9-1/2", the 12" and the 16". All are great. <hl> They are non-slip . <hl> They have a non-slip surface on the top, but they also have it on the bottom, so they stay where you put them in your cupboard. The movement is very smooth. I put quite a bit of weight (flour, sugar, box mixes) on the 16" and it turns just great. I wish I had bought more when I ordered these, but I will order more. They are hard plastic, so they may be best for inside the cupboard rather than a formal dining table. I recommend these if you are looking for a smooth operating turntable.

I bought this to help with space in some deep cabinets. I purchased it in three sizes, the 9-1/2", the 12" and the 16". All are great. They are <hl> non-slip <hl>. They have a non-slip surface on the top, but they also have it on the bottom, so they stay where you put them in your cupboard. The movement is very smooth. I put quite a bit of weight (flour, sugar, box mixes) on the 16" and it turns just great. I wish I had bought more when I ordered these, but I will order more. They are hard plastic, so they may be best for inside the cupboard rather than a formal dining table. I recommend these if you are looking for a smooth operating turntable.


Question: What is the temperature usually like?

We have a 700 square foot finished basement which is heated by both forced hot air from the propane furnace and an 8 foot baseboard heater.The baseboard heater is extremely expensive to run in the winter. We were looking for an alternative which would still keep our play room nice and toasty warm. Since I already had one smaller Lasko heater and was thrilled with it, we decided to get this one on sale and give it a try.So far it has kept our large basement at 70 degrees and has not run that much even though it is really cold up here in NE PA.Now if the electric bills are less than last year that will be the icing on the cake. And I am pretty sure they will be, considering our baseboard is an inefficient killowat sucking machine. ;)Update 1/21/10The heater is still working well and has kept my basement at 70 degrees all through the cold, cold winter. We got our first electric bill with the heater running and it was about 20 dollars less than what it would have been for December 2009. (we are billed monthly) and that is with me adding 2 aerogardens and several plant lights to my electricity bill.One small issue is that if you lose power this heater will not automatically turn back on when power is restored. If you are away for the weekend and get a power spike you should expect whatever area was dependant on the heater will be quite cold.

Answer: So far it has kept our large basement at 70 degrees and has not run that much even though it is really cold up here in NE PA.

We have a 700 square foot finished basement which is heated by both forced hot air from the propane furnace and an 8 foot baseboard heater. The baseboard heater is extremely expensive to run in the winter. We were looking for an alternative which would still keep our play room nice and toasty warm. Since I already had one smaller Lasko heater and was thrilled with it, we decided to get this one on sale and give it a try. <hl> So far it has kept our large basement at 70 degrees and has not run that much even though it is really cold up here in NE PA. Now if the electric bills are less than last year that will be the icing on the cake. <hl> And I am pretty sure they will be, considering our baseboard is an inefficient killowat sucking machine. ;)Update 1/21/10The heater is still working well and has kept my basement at 70 degrees all through the cold, cold winter. We got our first electric bill with the heater running and it was about 20 dollars less than what it would have been for December 2009. (we are billed monthly) and that is with me adding 2 aerogardens and several plant lights to my electricity bill. One small issue is that if you lose power this heater will not automatically turn back on when power is restored. If you are away for the weekend and get a power spike you should expect whatever area was dependant on the heater will be quite cold.

We have a 700 square foot finished basement which is heated by both forced hot air from the propane furnace and an 8 foot baseboard heater.The baseboard heater is extremely expensive to run in the winter. We were looking for an alternative which would still keep our play room nice and toasty warm. Since I already had one smaller Lasko heater and was thrilled with it, we decided to get this one on sale and give it a try.<hl> So far it has kept our large basement at 70 degrees and has not run that much even though it is really cold up here in NE PA. <hl>Now if the electric bills are less than last year that will be the icing on the cake. And I am pretty sure they will be, considering our baseboard is an inefficient killowat sucking machine. ;)Update 1/21/10The heater is still working well and has kept my basement at 70 degrees all through the cold, cold winter. We got our first electric bill with the heater running and it was about 20 dollars less than what it would have been for December 2009. (we are billed monthly) and that is with me adding 2 aerogardens and several plant lights to my electricity bill.One small issue is that if you lose power this heater will not automatically turn back on when power is restored. If you are away for the weekend and get a power spike you should expect whatever area was dependant on the heater will be quite cold.

<hl> So far it has kept our large basement at 70 degrees and has not run that much even though it is really cold up here in NE PA. <hl> Now if the electric bills are less than last year that will be the icing on the cake.


Question: What quality are these

Granite counters have taken a toll on my glassware and so, being down to a mis-matched 6 or so remaining, I was torn between plastic (cheesy) and a better glass product. After reading many Amazon customer reviews on the above mentioned glassware, I chose to replace my mess with 12 new ones and I love them! Sure, with a hard enough drop, they will still break but not easily. I believe that these glasses are of restaurant/bar/commercial quality and will last a good long time and for the price, I think that I may just buy another set for back-stock.So, if you want a great glass in a large size and you don't want plastic, I completely recommend these glasses.

Answer: restaurant/bar/commercial quality

Granite counters have taken a toll on my glassware and so, being down to a mis-matched 6 or so remaining, I was torn between plastic (cheesy) and a better glass product. After reading many Amazon customer reviews on the above mentioned glassware, I chose to replace my mess with 12 new ones and I love them! Sure, with a hard enough drop, they will still break but not easily. <hl> I believe that these glasses are of restaurant/bar/commercial quality and will last a good long time and for the price, I think that I may just buy another set for back-stock. <hl> So, if you want a great glass in a large size and you don't want plastic, I completely recommend these glasses.

Granite counters have taken a toll on my glassware and so, being down to a mis-matched 6 or so remaining, I was torn between plastic (cheesy) and a better glass product. After reading many Amazon customer reviews on the above mentioned glassware, I chose to replace my mess with 12 new ones and I love them! Sure, with a hard enough drop, they will still break but not easily. I believe that these glasses are of <hl> restaurant/bar/commercial quality <hl> and will last a good long time and for the price, I think that I may just buy another set for back-stock.So, if you want a great glass in a large size and you don't want plastic, I completely recommend these glasses.


Question: What is hard to get out of the machine?

the timer isn't a timer, it's merely a marker to remind you of how long you're planning on running the machine. the first time I used this, the yogurt turned out like runny, clotted soup. second time I used it, I added 1/3 cup dry millk to the milk while I was heating it. the yogurt turned out much better, but still not firm enough. one thing I don't like about this machine is that the bottom layer of yogurt turns out burnt. it's hard to get the container out of the machine when the yogurt is done. it's an ok machine, but it's not great. I suppose all yogurt makers are pretty much the same, just a heater.

Answer: the container

the timer isn't a timer, it's merely a marker to remind you of how long you're planning on running the machine. the first time I used this, the yogurt turned out like runny, clotted soup. second time I used it, I added 1/3 cup dry millk to the milk while I was heating it. the yogurt turned out much better, but still not firm enough. one thing I don't like about this machine is that the bottom layer of yogurt turns out burnt. <hl> it's hard to get the container out of the machine when the yogurt is done. <hl> it's an ok machine, but it's not great. I suppose all yogurt makers are pretty much the same, just a heater.

the timer isn't a timer, it's merely a marker to remind you of how long you're planning on running the machine. the first time I used this, the yogurt turned out like runny, clotted soup. second time I used it, I added 1/3 cup dry millk to the milk while I was heating it. the yogurt turned out much better, but still not firm enough. one thing I don't like about this machine is that the bottom layer of yogurt turns out burnt. it's hard to get <hl> the container <hl> out of the machine when the yogurt is done. it's an ok machine, but it's not great. I suppose all yogurt makers are pretty much the same, just a heater.


Question: How does the dinnerware look and feel?

The red looks good with our Empire Red Kitchen Aid appliances. The look and feel of the dinnerware is excellent. The plates are large, the bowls are deep and the mugs hold all the coffee I need (which is a lot).We've had the set for 4 months now, and have only chipped one plate and a bowl somehow developed a long crack from top to bottom. Not a big deal since it is Stoneware, which does break if you aren't careful. We wash ours in the dishwasher all the time, so accidents will happen. I'm still satisfied. Besides, the local supermarket is selling these as well so I can easily purchase a replacement as needed. The price I paid on Amazon.com for the entire set was a much better deal.

Answer: excellent

The red looks good with our Empire Red Kitchen Aid appliances. <hl> The look and feel of the dinnerware is excellent . <hl> The plates are large, the bowls are deep and the mugs hold all the coffee I need (which is a lot).We've had the set for 4 months now, and have only chipped one plate and a bowl somehow developed a long crack from top to bottom. Not a big deal since it is Stoneware, which does break if you aren't careful. We wash ours in the dishwasher all the time, so accidents will happen. I'm still satisfied. Besides, the local supermarket is selling these as well so I can easily purchase a replacement as needed. The price I paid on Amazon.com for the entire set was a much better deal.

The red looks good with our Empire Red Kitchen Aid appliances. The look and feel of the dinnerware is <hl> excellent <hl>. The plates are large, the bowls are deep and the mugs hold all the coffee I need (which is a lot).We've had the set for 4 months now, and have only chipped one plate and a bowl somehow developed a long crack from top to bottom. Not a big deal since it is Stoneware, which does break if you aren't careful. We wash ours in the dishwasher all the time, so accidents will happen. I'm still satisfied. Besides, the local supermarket is selling these as well so I can easily purchase a replacement as needed. The price I paid on Amazon.com for the entire set was a much better deal.

The look and feel of the dinnerware is <hl> excellent <hl> .


Question: How do pinking shears cut?

Pinking shears are a necessity for anyone who sews. They cut a zig-zag edge, which helps prevent fraying. Whether you're working with fragile fabrics, or making doll clothes with narrow seam allowances, or just want a clean finish to your garment seams--you'll need a pair of pinking shears in your toolbox. I recommend them to all of my students.These pinking shears in particular are great. The handles are soft and the automatic spring action is a lifesaver. With regular pinking shears, you have to open and shut the blades with every stroke. This might not seem like much trouble, but pinking shears are heavier than regular scissors and more difficult to use. If you have any kind of arthritis in your hands, you'll want a pair with the spring action. Or even if you just have a large project ahead of you, with lots of fabric to be cut out. You'll be grateful for the spring action by the time you're done.That said, these pinking shears are a bit touchy. On average, they seem to last about three years before needing replacement. This is my third pair in ten years, but then again, I do cut a lot of thick fabrics, like denim and twill. They really don't like that. They'll do the job, but they get stuck at times and you have to pry the blades open.For those who aren't aware, they do require cleaning and oiling to keep the spring action running smoothly. Use a pipe cleaner to dust in between the blades, then place a drop or two of sewing machine oil onto the round part between the blades, near the handle. Then act as if you're cutting something, so the oil can work its way into the gears. Make sure you cut a piece of scrap fabric with them after oiling, so you don't accidentally drip any excess oil onto your nice fabric. A sign that they're getting old and need to be replaced is that the spring action stops working and you find yourself oiling them constantly, trying to get them to work.I give them four stars, because they are a pain to use when the blades stick. And you'd think they'd last longer than three years without needing to be replaced. But they're such a necessity in the sewing room, you really can't live without them. Highly recommended!

Answer: zig-zag edge

Pinking shears are a necessity for anyone who sews. <hl> They cut a zig-zag edge , which helps prevent fraying. <hl> Whether you're working with fragile fabrics, or making doll clothes with narrow seam allowances, or just want a clean finish to your garment seams--you'll need a pair of pinking shears in your toolbox. I recommend them to all of my students. These pinking shears in particular are great. The handles are soft and the automatic spring action is a lifesaver. With regular pinking shears, you have to open and shut the blades with every stroke. This might not seem like much trouble, but pinking shears are heavier than regular scissors and more difficult to use. If you have any kind of arthritis in your hands, you'll want a pair with the spring action. Or even if you just have a large project ahead of you, with lots of fabric to be cut out. You'll be grateful for the spring action by the time you're done. That said, these pinking shears are a bit touchy. On average, they seem to last about three years before needing replacement. This is my third pair in ten years, but then again, I do cut a lot of thick fabrics, like denim and twill. They really don't like that. They'll do the job, but they get stuck at times and you have to pry the blades open. For those who aren't aware, they do require cleaning and oiling to keep the spring action running smoothly. Use a pipe cleaner to dust in between the blades, then place a drop or two of sewing machine oil onto the round part between the blades, near the handle. Then act as if you're cutting something, so the oil can work its way into the gears. Make sure you cut a piece of scrap fabric with them after oiling, so you don't accidentally drip any excess oil onto your nice fabric. A sign that they're getting old and need to be replaced is that the spring action stops working and you find yourself oiling them constantly, trying to get them to work. I give them four stars, because they are a pain to use when the blades stick. And you'd think they'd last longer than three years without needing to be replaced. But they're such a necessity in the sewing room, you really can't live without them. Highly recommended!

Pinking shears are a necessity for anyone who sews. They cut a <hl> zig-zag edge <hl>, which helps prevent fraying. Whether you're working with fragile fabrics, or making doll clothes with narrow seam allowances, or just want a clean finish to your garment seams--you'll need a pair of pinking shears in your toolbox. I recommend them to all of my students.These pinking shears in particular are great. The handles are soft and the automatic spring action is a lifesaver. With regular pinking shears, you have to open and shut the blades with every stroke. This might not seem like much trouble, but pinking shears are heavier than regular scissors and more difficult to use. If you have any kind of arthritis in your hands, you'll want a pair with the spring action. Or even if you just have a large project ahead of you, with lots of fabric to be cut out. You'll be grateful for the spring action by the time you're done.That said, these pinking shears are a bit touchy. On average, they seem to last about three years before needing replacement. This is my third pair in ten years, but then again, I do cut a lot of thick fabrics, like denim and twill. They really don't like that. They'll do the job, but they get stuck at times and you have to pry the blades open.For those who aren't aware, they do require cleaning and oiling to keep the spring action running smoothly. Use a pipe cleaner to dust in between the blades, then place a drop or two of sewing machine oil onto the round part between the blades, near the handle. Then act as if you're cutting something, so the oil can work its way into the gears. Make sure you cut a piece of scrap fabric with them after oiling, so you don't accidentally drip any excess oil onto your nice fabric. A sign that they're getting old and need to be replaced is that the spring action stops working and you find yourself oiling them constantly, trying to get them to work.I give them four stars, because they are a pain to use when the blades stick. And you'd think they'd last longer than three years without needing to be replaced. But they're such a necessity in the sewing room, you really can't live without them. Highly recommended!

They cut a <hl> zig-zag edge <hl> , which helps prevent fraying.


Question: The towel also feels like what other kind of fine towel?

Who would ever think that two little tiny stripes of color would make a white towel look so darn elegant? Not me. This touch makes these towels something special.The towels are larger than a standard bath towel, somewhere between the standard size and a bath sheet. I'm a big guy and this is just about the perfect size. The towels arrived with a lot of sizing on them and really need to be washed a couple of times before they are super soft and absorbent. One side is nubby less and absorbent. The other side is super absorbent, smoother, and feels a bit like a microfiber towel (it isn't really that fine, just close to that feeling).These are just so darn nice.

Answer: microfiber

Who would ever think that two little tiny stripes of color would make a white towel look so darn elegant? Not me. This touch makes these towels something special. The towels are larger than a standard bath towel, somewhere between the standard size and a bath sheet. I'm a big guy and this is just about the perfect size. The towels arrived with a lot of sizing on them and really need to be washed a couple of times before they are super soft and absorbent. One side is nubby less and absorbent. <hl> The other side is super absorbent, smoother, and feels a bit like a microfiber towel (it isn't really that fine, just close to that feeling).These are just so darn nice. <hl>

Who would ever think that two little tiny stripes of color would make a white towel look so darn elegant? Not me. This touch makes these towels something special.The towels are larger than a standard bath towel, somewhere between the standard size and a bath sheet. I'm a big guy and this is just about the perfect size. The towels arrived with a lot of sizing on them and really need to be washed a couple of times before they are super soft and absorbent. One side is nubby less and absorbent. The other side is super absorbent, smoother, and feels a bit like a <hl> microfiber <hl> towel (it isn't really that fine, just close to that feeling).These are just so darn nice.


Question: Who paid about $75 bucks more than the author for their oven?

Just received my new oven from Amazon (really fast FREE shipping), and I am ecstatic about it. It does everything I wanted in a toaster oven. Haven't tried out the rotisserie part yet, but have already cooked 3 meals in 2 days. Can't wait to make some "Roto-Chicken" in it... Ha! Ha!Sure, there is a point in the oven that is non-supported for the rack, but even some kitchen ovens have that fault. If you know it does that, just be prepared for it. Use 2 (TWO) oven mitts or potholders when sliding in or out the grill or pan. A friend of mine paid about $75 bucks more for theirs, and they don't like it... I think I'll "rub it in" and take mine over to their house some day! Ha! Ha!More writing in the future about this Toaster Oven... For the price and all the "amenities" it has, I'm very satisfied.

Answer: A friend of mine

Just received my new oven from Amazon (really fast FREE shipping), and I am ecstatic about it. It does everything I wanted in a toaster oven. Haven't tried out the rotisserie part yet, but have already cooked 3 meals in 2 days. Can't wait to make some "Roto-Chicken" in it... Ha! Ha!Sure, there is a point in the oven that is non-supported for the rack, but even some kitchen ovens have that fault. If you know it does that, just be prepared for it. Use 2 (TWO) oven mitts or potholders when sliding in or out the grill or pan. <hl> A friend of mine paid about $75 bucks more for theirs, and they don't like it... <hl> I think I'll "rub it in" and take mine over to their house some day! Ha! Ha!More writing in the future about this Toaster Oven... For the price and all the "amenities" it has, I'm very satisfied.

Just received my new oven from Amazon (really fast FREE shipping), and I am ecstatic about it. It does everything I wanted in a toaster oven. Haven't tried out the rotisserie part yet, but have already cooked 3 meals in 2 days. Can't wait to make some "Roto-Chicken" in it... Ha! Ha!Sure, there is a point in the oven that is non-supported for the rack, but even some kitchen ovens have that fault. If you know it does that, just be prepared for it. Use 2 (TWO) oven mitts or potholders when sliding in or out the grill or pan. <hl> A friend of mine <hl> paid about $75 bucks more for theirs, and they don't like it... I think I'll "rub it in" and take mine over to their house some day! Ha! Ha!More writing in the future about this Toaster Oven... For the price and all the "amenities" it has, I'm very satisfied.


Question: What kind of sandwiches did the author make?

When I took this knife out of the box I must confess that I had doubts about my judgment in having ordered such an awesome slab of steel. And, as I added it to my knife rack, I couldn't help wondering if I would ever actually find a use for it.Now, some months later, I am happy to report my trepidations were wholly unfounded. In fact, I find I use this knife just as often as my other primary "go to knives" - an 8" chef's knife, a boning knife, a paring knife, and a Chinese cleaver. All but one of these is a Forschner/Victorinox, a brand whose price performance ratio is hard to beat.I cure and smoke my own bacon, and this knife lets me produce slices just as thin as I like, nice and even, and with very little effort. But that isn't the only thing I use it for - this evening I quickly reduced a slow-cooked (8 hours) eye of round into wonderful thin slices for making roast beef sandwiches. And if I ever get around to cooking myself one of those big steamship rounds, well, I'm all ready for the slicing ! This knife is great for hams and turkey breasts as well.My only complaint (and it isn't much of a complaint) was that it could have been just a little sharper when I got it, but since regular sharpening and steeling are just part of the routine of using a knife like this, it wasn't a big deal. Just know that you may not be getting the optimum performance out of this knife if you haven't sharpened it since it arrived.If you serve much meat, I wholeheartedly recommend you consider this knife. Nothing beats it for the ability to produce beautiful slices with a minimum of effort and skill.

Answer: roast beef

When I took this knife out of the box I must confess that I had doubts about my judgment in having ordered such an awesome slab of steel. And, as I added it to my knife rack, I couldn't help wondering if I would ever actually find a use for it. Now, some months later, I am happy to report my trepidations were wholly unfounded. In fact, I find I use this knife just as often as my other primary "go to knives" - an 8" chef's knife, a boning knife, a paring knife, and a Chinese cleaver. All but one of these is a Forschner/Victorinox, a brand whose price performance ratio is hard to beat. I cure and smoke my own bacon, and this knife lets me produce slices just as thin as I like, nice and even, and with very little effort. <hl> But that isn't the only thing I use it for - this evening I quickly reduced a slow-cooked (8 hours) eye of round into wonderful thin slices for making roast beef sandwiches. <hl> And if I ever get around to cooking myself one of those big steamship rounds, well, I'm all ready for the slicing ! This knife is great for hams and turkey breasts as well. My only complaint (and it isn't much of a complaint) was that it could have been just a little sharper when I got it, but since regular sharpening and steeling are just part of the routine of using a knife like this, it wasn't a big deal. Just know that you may not be getting the optimum performance out of this knife if you haven't sharpened it since it arrived. If you serve much meat, I wholeheartedly recommend you consider this knife. Nothing beats it for the ability to produce beautiful slices with a minimum of effort and skill.

When I took this knife out of the box I must confess that I had doubts about my judgment in having ordered such an awesome slab of steel. And, as I added it to my knife rack, I couldn't help wondering if I would ever actually find a use for it.Now, some months later, I am happy to report my trepidations were wholly unfounded. In fact, I find I use this knife just as often as my other primary "go to knives" - an 8" chef's knife, a boning knife, a paring knife, and a Chinese cleaver. All but one of these is a Forschner/Victorinox, a brand whose price performance ratio is hard to beat.I cure and smoke my own bacon, and this knife lets me produce slices just as thin as I like, nice and even, and with very little effort. But that isn't the only thing I use it for - this evening I quickly reduced a slow-cooked (8 hours) eye of round into wonderful thin slices for making <hl> roast beef <hl> sandwiches. And if I ever get around to cooking myself one of those big steamship rounds, well, I'm all ready for the slicing ! This knife is great for hams and turkey breasts as well.My only complaint (and it isn't much of a complaint) was that it could have been just a little sharper when I got it, but since regular sharpening and steeling are just part of the routine of using a knife like this, it wasn't a big deal. Just know that you may not be getting the optimum performance out of this knife if you haven't sharpened it since it arrived.If you serve much meat, I wholeheartedly recommend you consider this knife. Nothing beats it for the ability to produce beautiful slices with a minimum of effort and skill.


Question: What does the writer recommend to use in conjunction with The Dorkfood?

The Dorkfood is cheap and it works. So there's that. Pair it with a bucket heater or a crockpot with a dial and you're good to go.There are a couple downsides. For one, it's Fahrenheit only, whereas most sous vide recipes are in Celsius, so be prepared to type "50 c to f" into google every time you use it.For another, the UI is kinda crappy. When you hit the temp button, you could not possibly want to do anything other than change the temp. What does it do? Nothing. You have to hold down the button for what feels like a minute before you actually can.These are minor gripes though, and as a result I give it a solid 4 stars.

Answer: a bucket heater or a crockpot with a dial

The Dorkfood is cheap and it works. So there's that. <hl> Pair it with a bucket heater or a crockpot with a dial and you're good to go. <hl> There are a couple downsides. For one, it's Fahrenheit only, whereas most sous vide recipes are in Celsius, so be prepared to type "50 c to f" into google every time you use it. For another, the UI is kinda crappy. When you hit the temp button, you could not possibly want to do anything other than change the temp. What does it do? Nothing. You have to hold down the button for what feels like a minute before you actually can. These are minor gripes though, and as a result I give it a solid 4 stars.

The Dorkfood is cheap and it works. So there's that. Pair it with <hl> a bucket heater or a crockpot with a dial <hl> and you're good to go.There are a couple downsides. For one, it's Fahrenheit only, whereas most sous vide recipes are in Celsius, so be prepared to type "50 c to f" into google every time you use it.For another, the UI is kinda crappy. When you hit the temp button, you could not possibly want to do anything other than change the temp. What does it do? Nothing. You have to hold down the button for what feels like a minute before you actually can.These are minor gripes though, and as a result I give it a solid 4 stars.


Question: How is the tap water in NYC?

I live in NYC where the tap water is already above standards. Therefore, i don't need a reverse-osmosis or serious filtration system as if i were living in Southern Cal (where the calcification is ridiculous), or other city with subpar water municipalities. I use a Brita filter simply to remove chlorine taste, but i was fed up with the pricey filter cost. Ecopure is much cheaper, and does the job just as well -- without annoying charcoal particles or slow filtration. I'd say the Ecopure filters about 40-50% faster than Brita, a detail that may seem unimportant but guess what? I don't spend as much time standing in front of the sink waiting to fill up a pitcher.

Answer: above standards

<hl> I live in NYC where the tap water is already above standards . <hl> Therefore, i don't need a reverse-osmosis or serious filtration system as if i were living in Southern Cal (where the calcification is ridiculous), or other city with subpar water municipalities. I use a Brita filter simply to remove chlorine taste, but i was fed up with the pricey filter cost. Ecopure is much cheaper, and does the job just as well -- without annoying charcoal particles or slow filtration. I'd say the Ecopure filters about 40-50% faster than Brita, a detail that may seem unimportant but guess what? I don't spend as much time standing in front of the sink waiting to fill up a pitcher.

I live in NYC where the tap water is already <hl> above standards <hl>. Therefore, i don't need a reverse-osmosis or serious filtration system as if i were living in Southern Cal (where the calcification is ridiculous), or other city with subpar water municipalities. I use a Brita filter simply to remove chlorine taste, but i was fed up with the pricey filter cost. Ecopure is much cheaper, and does the job just as well -- without annoying charcoal particles or slow filtration. I'd say the Ecopure filters about 40-50% faster than Brita, a detail that may seem unimportant but guess what? I don't spend as much time standing in front of the sink waiting to fill up a pitcher.

I live in NYC where the tap water is already <hl> above standards <hl> .


Question: What type of lid does the travel mug have?

I had high hopes for this travel mug. It's well-insulated, stainless steel, and the lid appeared to seal very well. In fact, both Amazon and Thermos advertise the cup as being "spill-proof." It's also my favorite kind of lid, the kind that flips open. I like those because they're the easiest to clean well.Unfortunately, for some reason, Thermos decided not to make the flip part of the lid seal. It's just two pieces of plastic that fit loosely together - no rubber seal at all. So while the lid twists on and seals tightly, the part that you actually drink out of leaks like crazy. I suppose this cup is perfect for anyone who can guarantee that it will never tip over. But for those of you who do things like put it in your briefcase, toss it on the car seat next to you, or even just tilt it a bit while walking around, it's an awful travel mug.

Answer: the kind that flips open

I had high hopes for this travel mug. It's well-insulated, stainless steel, and the lid appeared to seal very well. In fact, both Amazon and Thermos advertise the cup as being "spill-proof." <hl> It's also my favorite kind of lid, the kind that flips open . <hl> I like those because they're the easiest to clean well. Unfortunately, for some reason, Thermos decided not to make the flip part of the lid seal. It's just two pieces of plastic that fit loosely together - no rubber seal at all. So while the lid twists on and seals tightly, the part that you actually drink out of leaks like crazy. I suppose this cup is perfect for anyone who can guarantee that it will never tip over. But for those of you who do things like put it in your briefcase, toss it on the car seat next to you, or even just tilt it a bit while walking around, it's an awful travel mug.

I had high hopes for this travel mug. It's well-insulated, stainless steel, and the lid appeared to seal very well. In fact, both Amazon and Thermos advertise the cup as being "spill-proof." It's also my favorite kind of lid, <hl> the kind that flips open <hl>. I like those because they're the easiest to clean well.Unfortunately, for some reason, Thermos decided not to make the flip part of the lid seal. It's just two pieces of plastic that fit loosely together - no rubber seal at all. So while the lid twists on and seals tightly, the part that you actually drink out of leaks like crazy. I suppose this cup is perfect for anyone who can guarantee that it will never tip over. But for those of you who do things like put it in your briefcase, toss it on the car seat next to you, or even just tilt it a bit while walking around, it's an awful travel mug.

It's also my favorite kind of lid, <hl> the kind that flips open <hl> .


Question: How was the scale rated?

When my wife and I got more serious about getting healthy, we knew we had to throw out our inaccurate and difficult-to-read scale. I looked on Amazon and found that EatSmart scales had awesome ratings. After comparing the features, I felt the Precision Premium fit our needs.Setting it up and calibrating was simple - put the batteries in and set it on a hard surface. Batteries are included, by the way.Using it is super easy - step on the scale. That's it. In just a second, you'll have your weight. And it's really easy to read.One of the bonus features of this scale is that it looks good. So many scales just look awful in your bathroom. This one looks pretty stylish. And it has a really low profile.Definitely made the right decision with this scale.

Answer: awesome

When my wife and I got more serious about getting healthy, we knew we had to throw out our inaccurate and difficult-to-read scale. <hl> I looked on Amazon and found that EatSmart scales had awesome ratings. <hl> After comparing the features, I felt the Precision Premium fit our needs. Setting it up and calibrating was simple - put the batteries in and set it on a hard surface. Batteries are included, by the way. Using it is super easy - step on the scale. That's it. In just a second, you'll have your weight. And it's really easy to read. One of the bonus features of this scale is that it looks good. So many scales just look awful in your bathroom. This one looks pretty stylish. And it has a really low profile. Definitely made the right decision with this scale.

When my wife and I got more serious about getting healthy, we knew we had to throw out our inaccurate and difficult-to-read scale. I looked on Amazon and found that EatSmart scales had <hl> awesome <hl> ratings. After comparing the features, I felt the Precision Premium fit our needs.Setting it up and calibrating was simple - put the batteries in and set it on a hard surface. Batteries are included, by the way.Using it is super easy - step on the scale. That's it. In just a second, you'll have your weight. And it's really easy to read.One of the bonus features of this scale is that it looks good. So many scales just look awful in your bathroom. This one looks pretty stylish. And it has a really low profile.Definitely made the right decision with this scale.


Question: What did they test the thermometers in?

Purchased this thermometer along with the CDN IRXL220 Large Dial Insta-Read Thermometer. I use the Large Dial for roasts and this one for poultry (this thermometer's sensing part extends from its tip for 3/4 of an inch which works better for the thinner poultry meat). I tested both of them out of the box on a glass of ice water and a pot of boiling water. The readings were right on at 32 and 212 degress plus or minus a smidgen of a degree. So far, this thermometer works well and has not given me any problems. Its hold feature comes in handy when you need to get to a better light source to read the temperature.

Answer: glass of ice water and a pot of boiling water

Purchased this thermometer along with the CDN IRXL220 Large Dial Insta-Read Thermometer. I use the Large Dial for roasts and this one for poultry (this thermometer's sensing part extends from its tip for 3/4 of an inch which works better for the thinner poultry meat). <hl> I tested both of them out of the box on a glass of ice water and a pot of boiling water . <hl> The readings were right on at 32 and 212 degress plus or minus a smidgen of a degree. So far, this thermometer works well and has not given me any problems. Its hold feature comes in handy when you need to get to a better light source to read the temperature.

Purchased this thermometer along with the CDN IRXL220 Large Dial Insta-Read Thermometer. I use the Large Dial for roasts and this one for poultry (this thermometer's sensing part extends from its tip for 3/4 of an inch which works better for the thinner poultry meat). I tested both of them out of the box on a <hl> glass of ice water and a pot of boiling water <hl>. The readings were right on at 32 and 212 degress plus or minus a smidgen of a degree. So far, this thermometer works well and has not given me any problems. Its hold feature comes in handy when you need to get to a better light source to read the temperature.

I tested both of them out of the box on a <hl> glass of ice water and a pot of boiling water <hl> .


Question: Where are the pans made?

I never thought I'd love a bread pan so much. The pan has a nice weight. My bread comes out evenly cooked and perfectly browned on the sides and bottom (as well as on the top). I greased my pans the first 3 times, but the last time I baked bread, I didn't grease the pans and the loaves slid right out. These are truly non-stick (unlike my older "non-stick" teflon loaf pan). I also love that these are made in America. I've recently switched to baking all of our bread, rather than buying sandwich bread, and plan on picking up 2 more of these (I already have 2).

Answer: America

I never thought I'd love a bread pan so much. The pan has a nice weight. My bread comes out evenly cooked and perfectly browned on the sides and bottom (as well as on the top). I greased my pans the first 3 times, but the last time I baked bread, I didn't grease the pans and the loaves slid right out. These are truly non-stick (unlike my older "non-stick" teflon loaf pan). <hl> I also love that these are made in America . <hl> I've recently switched to baking all of our bread, rather than buying sandwich bread, and plan on picking up 2 more of these (I already have 2).

I never thought I'd love a bread pan so much. The pan has a nice weight. My bread comes out evenly cooked and perfectly browned on the sides and bottom (as well as on the top). I greased my pans the first 3 times, but the last time I baked bread, I didn't grease the pans and the loaves slid right out. These are truly non-stick (unlike my older "non-stick" teflon loaf pan). I also love that these are made in <hl> America <hl>. I've recently switched to baking all of our bread, rather than buying sandwich bread, and plan on picking up 2 more of these (I already have 2).

I also love that these are made in <hl> America <hl> .


Question: what did the author recently purchase

i purchased this for cooking pizzas when we go RVing. i use a camp chef stove and recently purchased their pizza oven. haven't tried the oven yet, but it's clear that if you buy that you will need one of these "peels" (oversize spatula) to get things in and out. i really like this size. the flat spatula part is nicely sized, thick enough not to bend, but thin enough so that it'll be easy to get pizzas (or other) on and off. the handle is the perfect length! it'll get your items in and out of any residential or camp oven, but it's no so long as to make it a storing hassle. i thought the price was very reasonable too.

Answer: pizza oven

i purchased this for cooking pizzas when we go RVing. <hl> i use a camp chef stove and recently purchased their pizza oven . haven't tried the oven yet, but it's clear that if you buy that you will need one of these "peels" (oversize spatula) to get things in and out. <hl> i really like this size. the flat spatula part is nicely sized, thick enough not to bend, but thin enough so that it'll be easy to get pizzas (or other) on and off. the handle is the perfect length! it'll get your items in and out of any residential or camp oven, but it's no so long as to make it a storing hassle. i thought the price was very reasonable too.

i purchased this for cooking pizzas when we go RVing. i use a camp chef stove and recently purchased their <hl> pizza oven <hl>. haven't tried the oven yet, but it's clear that if you buy that you will need one of these "peels" (oversize spatula) to get things in and out. i really like this size. the flat spatula part is nicely sized, thick enough not to bend, but thin enough so that it'll be easy to get pizzas (or other) on and off. the handle is the perfect length! it'll get your items in and out of any residential or camp oven, but it's no so long as to make it a storing hassle. i thought the price was very reasonable too.

i use a camp chef stove and recently purchased their <hl> pizza oven <hl> . haven't tried the oven yet, but it's clear that if you buy that you will need one of these "peels" (oversize spatula) to get things in and out.


Question: What vegetables will the knife glide through easily?

The handle is perfectly shaped, easy to grip, and feels so good in my hand. This knife creates efficiency, swiftly gliding through squash and potatoes. It is the best knife ever.I bought this Victorinox knife a few months ago to upgrade from a lesser quality knife, and I am so happy that I did. Yesterday, I was making soup and I reached for a knife to chop some vegetables. My new Victorinox knife was dirty (from easily slicing through cold dense fudge,) so I used my old knife, thinking that it would not be a big deal. I could not believe the difference. My old inferior knife could not even slice through celery without leaving uncut stringy bits. After five seconds of that inadequacy, I went and washed the Victorinox knife, and the rest of my slicing was quick, effortless, and flawless.

Answer: squash and potatoes

The handle is perfectly shaped, easy to grip, and feels so good in my hand. <hl> This knife creates efficiency, swiftly gliding through squash and potatoes . <hl> It is the best knife ever. I bought this Victorinox knife a few months ago to upgrade from a lesser quality knife, and I am so happy that I did. Yesterday, I was making soup and I reached for a knife to chop some vegetables. My new Victorinox knife was dirty (from easily slicing through cold dense fudge,) so I used my old knife, thinking that it would not be a big deal. I could not believe the difference. My old inferior knife could not even slice through celery without leaving uncut stringy bits. After five seconds of that inadequacy, I went and washed the Victorinox knife, and the rest of my slicing was quick, effortless, and flawless.

The handle is perfectly shaped, easy to grip, and feels so good in my hand. This knife creates efficiency, swiftly gliding through <hl> squash and potatoes <hl>. It is the best knife ever.I bought this Victorinox knife a few months ago to upgrade from a lesser quality knife, and I am so happy that I did. Yesterday, I was making soup and I reached for a knife to chop some vegetables. My new Victorinox knife was dirty (from easily slicing through cold dense fudge,) so I used my old knife, thinking that it would not be a big deal. I could not believe the difference. My old inferior knife could not even slice through celery without leaving uncut stringy bits. After five seconds of that inadequacy, I went and washed the Victorinox knife, and the rest of my slicing was quick, effortless, and flawless.

This knife creates efficiency, swiftly gliding through <hl> squash and potatoes <hl> .


Question: How many are left?

The other reviewers are right! I purchased a set of 16 and have one left. I have NEVER had glasses that break like these. The shape of the base seems to be the problem. They crack for no apparent reason, at the base. I had one sitting on the counter, 5 minutes after I took it out of the cooled dishwasher, and it cracked. Another cracked while sitting in the cabinet, 30 minutes after being put away. Several cracked when we poured chilled beverages or put ice into the glass. VERY STRANGE! We really liked the shape and feel, but would not buy again! However, they were an experience!

Answer: one

The other reviewers are right! <hl> I purchased a set of 16 and have one left. <hl> I have NEVER had glasses that break like these. The shape of the base seems to be the problem. They crack for no apparent reason, at the base. I had one sitting on the counter, 5 minutes after I took it out of the cooled dishwasher, and it cracked. Another cracked while sitting in the cabinet, 30 minutes after being put away. Several cracked when we poured chilled beverages or put ice into the glass. VERY STRANGE! We really liked the shape and feel, but would not buy again! However, they were an experience!

The other reviewers are right! I purchased a set of 16 and have <hl> one <hl> left. I have NEVER had glasses that break like these. The shape of the base seems to be the problem. They crack for no apparent reason, at the base. I had one sitting on the counter, 5 minutes after I took it out of the cooled dishwasher, and it cracked. Another cracked while sitting in the cabinet, 30 minutes after being put away. Several cracked when we poured chilled beverages or put ice into the glass. VERY STRANGE! We really liked the shape and feel, but would not buy again! However, they were an experience!


Question: What the knife looks like?

These are just like the great steak knifes you'll pay five or six times more for in Chicago or New York if they had the trendy steakhouse name stamped into the wood handle. They definitely are well made by Tramontina, a reliable italian manufacturer of quality kitchen goods. They look hearty and well made, and they are, with the wide, serrated blades. The minute you cut into your steak and it glides right through as if the steak was made of butter, you'll know you made a great choice. What's more, shop the various suppliers on the Amazon site as I got these 4 beauties for around $11 total! You will be hard pressed to find similar cheesy knockoffs in the various discount stores at twice that price, trust me.

Answer: look hearty and well made

These are just like the great steak knifes you'll pay five or six times more for in Chicago or New York if they had the trendy steakhouse name stamped into the wood handle. They definitely are well made by Tramontina, a reliable italian manufacturer of quality kitchen goods. <hl> They look hearty and well made , and they are, with the wide, serrated blades. <hl> The minute you cut into your steak and it glides right through as if the steak was made of butter, you'll know you made a great choice. What's more, shop the various suppliers on the Amazon site as I got these 4 beauties for around $11 total! You will be hard pressed to find similar cheesy knockoffs in the various discount stores at twice that price, trust me.

These are just like the great steak knifes you'll pay five or six times more for in Chicago or New York if they had the trendy steakhouse name stamped into the wood handle. They definitely are well made by Tramontina, a reliable italian manufacturer of quality kitchen goods. They <hl> look hearty and well made <hl>, and they are, with the wide, serrated blades. The minute you cut into your steak and it glides right through as if the steak was made of butter, you'll know you made a great choice. What's more, shop the various suppliers on the Amazon site as I got these 4 beauties for around $11 total! You will be hard pressed to find similar cheesy knockoffs in the various discount stores at twice that price, trust me.

They <hl> look hearty and well made <hl> , and they are, with the wide, serrated blades.


Question: The reviewer has this cup to remind them of who?

I have a small three peg rack at the top of my kitchen faucet, on the wall... and this cup hangs there and it fits just right on the peg. I use it for myself when I want a drink of water. I live alone so no one else uses it. And occasionally I will use it for measuring liguids too... but mostly for drinking water. When I was a child, my grandma had an outdoor pump at a well to supply her with the water she used in her house work and cooking. There was a enamel tin cup that hung near the handle of the pump. So if you were outside and needed a drink of water... all you had to do was use that cup and push the handle of the pump about 3 times and you got the COLDEST and FRESH tasting water. This cup in my home reminds me of grandma's cup at the pump. A cup at the "water tap" for drinking... that is why I have this cup. It reminds me of my grandma and my childhood days on the farm.

Answer: grandma

I have a small three peg rack at the top of my kitchen faucet, on the wall... and this cup hangs there and it fits just right on the peg. I use it for myself when I want a drink of water. I live alone so no one else uses it. And occasionally I will use it for measuring liguids too... but mostly for drinking water. <hl> When I was a child, my grandma had an outdoor pump at a well to supply her with the water she used in her house work and cooking. <hl> There was a enamel tin cup that hung near the handle of the pump. So if you were outside and needed a drink of water... all you had to do was use that cup and push the handle of the pump about 3 times and you got the COLDEST and FRESH tasting water. This cup in my home reminds me of grandma's cup at the pump. A cup at the "water tap" for drinking... that is why I have this cup. It reminds me of my grandma and my childhood days on the farm.

I have a small three peg rack at the top of my kitchen faucet, on the wall... and this cup hangs there and it fits just right on the peg. I use it for myself when I want a drink of water. I live alone so no one else uses it. And occasionally I will use it for measuring liguids too... but mostly for drinking water. When I was a child, my <hl> grandma <hl> had an outdoor pump at a well to supply her with the water she used in her house work and cooking. There was a enamel tin cup that hung near the handle of the pump. So if you were outside and needed a drink of water... all you had to do was use that cup and push the handle of the pump about 3 times and you got the COLDEST and FRESH tasting water. This cup in my home reminds me of grandma's cup at the pump. A cup at the "water tap" for drinking... that is why I have this cup. It reminds me of my grandma and my childhood days on the farm.


Question: What material is the electric kettle made of?

The Braun WK200W is the third electric kettle that I have owned, or had long term use of. This is my favorite. It is very smart looking, as well as practical, but I've always looked at practical first. It is the lightest and easiest to fill and fastest to heat up.The current stainless steel electric kettles on the market work very well, but are much heavier and are harder to fill. If you have to have stainless, though. It won't matter. If plastic (or whatever composite it is made from) is fine, then this kettle will fulfill all of your needs, I think. And Braun is one of the best brands out there.

Answer: plastic

The Braun WK200W is the third electric kettle that I have owned, or had long term use of. This is my favorite. It is very smart looking, as well as practical, but I've always looked at practical first. It is the lightest and easiest to fill and fastest to heat up. The current stainless steel electric kettles on the market work very well, but are much heavier and are harder to fill. If you have to have stainless, though. It won't matter. <hl> If plastic (or whatever composite it is made from) is fine, then this kettle will fulfill all of your needs, I think. <hl> And Braun is one of the best brands out there.

The Braun WK200W is the third electric kettle that I have owned, or had long term use of. This is my favorite. It is very smart looking, as well as practical, but I've always looked at practical first. It is the lightest and easiest to fill and fastest to heat up.The current stainless steel electric kettles on the market work very well, but are much heavier and are harder to fill. If you have to have stainless, though. It won't matter. If <hl> plastic <hl> (or whatever composite it is made from) is fine, then this kettle will fulfill all of your needs, I think. And Braun is one of the best brands out there.


Question: what do you mount the speaker onto the stand with

I bought these as soon as I moved into my apartment, I didn't want to go through the process of hanging my speakers on the wall and run the risk of something happening to them. With that being said, it doesn't take long to get these put together and the cable management is really good, you're basically running cable through the base of the speaker stand and out the bottom... I have to unfortunately run it through the perimeter of my living room so even though the cable management is great I still have noticeable cables around. Other than that, the price is good for this you're basically mounting the speaker onto the stand with a screw that goes through another cable management bracket on the back of it.

Answer: a screw

I bought these as soon as I moved into my apartment, I didn't want to go through the process of hanging my speakers on the wall and run the risk of something happening to them. With that being said, it doesn't take long to get these put together and the cable management is really good, you're basically running cable through the base of the speaker stand and out the bottom... I have to unfortunately run it through the perimeter of my living room so even though the cable management is great I still have noticeable cables around. <hl> Other than that, the price is good for this you're basically mounting the speaker onto the stand with a screw that goes through another cable management bracket on the back of it. <hl>

I bought these as soon as I moved into my apartment, I didn't want to go through the process of hanging my speakers on the wall and run the risk of something happening to them. With that being said, it doesn't take long to get these put together and the cable management is really good, you're basically running cable through the base of the speaker stand and out the bottom... I have to unfortunately run it through the perimeter of my living room so even though the cable management is great I still have noticeable cables around. Other than that, the price is good for this you're basically mounting the speaker onto the stand with <hl> a screw <hl> that goes through another cable management bracket on the back of it.


Question: What does the author have?

Bought this over a month ago because I am so tired of using a hand can opener when I spend a lot of time cooking for a large family. This has truly been a blessing in my kitchen and now that I have had it, I can not live without it.Worked fantastic right out of the box & I have had 0 issues with it. It is quiet for the most part and looks really high end but yet very low pay for this guy. LOVE IT!!!!

Answer: large family

a large family .

Bought this over a month ago because I am so tired of using a hand can opener when I spend a lot of time cooking for <hl> a large family . <hl> This has truly been a blessing in my kitchen and now that I have had it, I can not live without it. Worked fantastic right out of the box & I have had 0 issues with it. It is quiet for the most part and looks really high end but yet very low pay for this guy. LOVE IT!!!!

Bought this over a month ago because I am so tired of using a hand can opener when I spend a lot of time cooking for a <hl> large family <hl>. This has truly been a blessing in my kitchen and now that I have had it, I can not live without it.Worked fantastic right out of the box & I have had 0 issues with it. It is quiet for the most part and looks really high end but yet very low pay for this guy. LOVE IT!!!!


Question: How many people attempted to assemble the difficult chair?

I ordered four different chairs for our office. The other three, one person assembled with no problem. This one, two people worked on for well over an hour on two different occasions. Instead of enclosing a package of hardware, the screws were already screwed into the holes and then painted over (WHY?)- the directions confirmed that we had to remove the screws in order to assemble. I watched an able-bodied guy's knuckles go white as he tried for the nth time to remove one, and still couldn't get it to budge. We tried using a safety pin to remove some of the plasticky blue coating they'd painted the threads with (WHY?) and still couldn't make much progress. Finally got it together, but at the cost of several hours of staff time. Make sure you have a good screwdriver if you're brave enough to attempt it - unlike the other chairs I bought, this one didn't come with an Allen wrench.Assembled, I'm not overly impressed. It's okay. It's comfortable - now. But the seat does not have a lot of cushioning (135lb person using it) and the foam is low density and seems to low quality, so I expect it'll be flat in a year. The mesh back is nice and gives good support, except that the canvas trim around it is uneven and looks very cheap. I can see what another reviewer meant about the seat fabric being very rough - shouldn't be a problem for me, but I wouldn't want to use it with bare legs. The adjustments are pretty good. Definitely would not order another.** Update 9/4/13: taking off a star. The foam seat has flattened, as I expected. The wide-gauge mesh of the seat also traps lots of particles and looks dirty constantly. Not worth the money. Get theOffice Star Space Professional Air Grid Back Managers Chair with Leather Seat and 2-to-1 Synchro Tilt Controlinstead - a little more money but much better quality. I just bought a fourth one for the office.

Answer: two

I ordered four different chairs for our office. The other three, one person assembled with no problem. <hl> This one, two people worked on for well over an hour on two different occasions. <hl> Instead of enclosing a package of hardware, the screws were already screwed into the holes and then painted over (WHY?)- the directions confirmed that we had to remove the screws in order to assemble. I watched an able-bodied guy's knuckles go white as he tried for the nth time to remove one, and still couldn't get it to budge. We tried using a safety pin to remove some of the plasticky blue coating they'd painted the threads with (WHY?) and still couldn't make much progress. Finally got it together, but at the cost of several hours of staff time. Make sure you have a good screwdriver if you're brave enough to attempt it - unlike the other chairs I bought, this one didn't come with an Allen wrench. Assembled, I'm not overly impressed. It's okay. It's comfortable - now. But the seat does not have a lot of cushioning (135lb person using it) and the foam is low density and seems to low quality, so I expect it'll be flat in a year. The mesh back is nice and gives good support, except that the canvas trim around it is uneven and looks very cheap. I can see what another reviewer meant about the seat fabric being very rough - shouldn't be a problem for me, but I wouldn't want to use it with bare legs. The adjustments are pretty good. Definitely would not order another. ** Update 9/4/13: taking off a star. The foam seat has flattened, as I expected. The wide-gauge mesh of the seat also traps lots of particles and looks dirty constantly. Not worth the money. Get theOffice Star Space Professional Air Grid Back Managers Chair with Leather Seat and 2-to-1 Synchro Tilt Controlinstead - a little more money but much better quality. I just bought a fourth one for the office.

I ordered four different chairs for our office. The other three, one person assembled with no problem. This one, <hl> two <hl> people worked on for well over an hour on two different occasions. Instead of enclosing a package of hardware, the screws were already screwed into the holes and then painted over (WHY?)- the directions confirmed that we had to remove the screws in order to assemble. I watched an able-bodied guy's knuckles go white as he tried for the nth time to remove one, and still couldn't get it to budge. We tried using a safety pin to remove some of the plasticky blue coating they'd painted the threads with (WHY?) and still couldn't make much progress. Finally got it together, but at the cost of several hours of staff time. Make sure you have a good screwdriver if you're brave enough to attempt it - unlike the other chairs I bought, this one didn't come with an Allen wrench.Assembled, I'm not overly impressed. It's okay. It's comfortable - now. But the seat does not have a lot of cushioning (135lb person using it) and the foam is low density and seems to low quality, so I expect it'll be flat in a year. The mesh back is nice and gives good support, except that the canvas trim around it is uneven and looks very cheap. I can see what another reviewer meant about the seat fabric being very rough - shouldn't be a problem for me, but I wouldn't want to use it with bare legs. The adjustments are pretty good. Definitely would not order another.** Update 9/4/13: taking off a star. The foam seat has flattened, as I expected. The wide-gauge mesh of the seat also traps lots of particles and looks dirty constantly. Not worth the money. Get theOffice Star Space Professional Air Grid Back Managers Chair with Leather Seat and 2-to-1 Synchro Tilt Controlinstead - a little more money but much better quality. I just bought a fourth one for the office.


Question: What did I love?

LOVE, LOVE, LOVE this coffee press, and tha fact that it won't EVER require a replacement glass insert is the BEST.The coffee is delicious and not bitter, which is why I purchased a French press in the first place, but for clumsy ol' me, this is a godsend.The coffee stays hotter longer than a glass press would allow as it's insulated.LOVE it...or did I mention that already?

Answer: coffee press

<hl> LOVE, LOVE, LOVE this coffee press , and tha fact that it won't EVER require a replacement glass insert is the BEST.The coffee is delicious and not bitter, which is why I purchased a French press in the first place, but for clumsy ol' me, this is a godsend. <hl> The coffee stays hotter longer than a glass press would allow as it's insulated. LOVE it...or did I mention that already?

LOVE, LOVE, LOVE this <hl> coffee press <hl>, and tha fact that it won't EVER require a replacement glass insert is the BEST.The coffee is delicious and not bitter, which is why I purchased a French press in the first place, but for clumsy ol' me, this is a godsend.The coffee stays hotter longer than a glass press would allow as it's insulated.LOVE it...or did I mention that already?

LOVE, LOVE, LOVE this <hl> coffee press <hl> , and tha fact that it won't EVER require a replacement glass insert is the BEST.The coffee is delicious and not bitter, which is why I purchased a French press in the first place, but for clumsy ol' me, this is a godsend.


Question: How does the knife feel in the user's hand?

Answer: good

<hl> The handle is perfectly shaped, easy to grip, and feels so good in my hand. <hl> This knife creates efficiency, swiftly gliding through squash and potatoes. It is the best knife ever. I bought this Victorinox knife a few months ago to upgrade from a lesser quality knife, and I am so happy that I did. Yesterday, I was making soup and I reached for a knife to chop some vegetables. My new Victorinox knife was dirty (from easily slicing through cold dense fudge,) so I used my old knife, thinking that it would not be a big deal. I could not believe the difference. My old inferior knife could not even slice through celery without leaving uncut stringy bits. After five seconds of that inadequacy, I went and washed the Victorinox knife, and the rest of my slicing was quick, effortless, and flawless.

The handle is perfectly shaped, easy to grip, and feels so <hl> good <hl> in my hand. This knife creates efficiency, swiftly gliding through squash and potatoes. It is the best knife ever.I bought this Victorinox knife a few months ago to upgrade from a lesser quality knife, and I am so happy that I did. Yesterday, I was making soup and I reached for a knife to chop some vegetables. My new Victorinox knife was dirty (from easily slicing through cold dense fudge,) so I used my old knife, thinking that it would not be a big deal. I could not believe the difference. My old inferior knife could not even slice through celery without leaving uncut stringy bits. After five seconds of that inadequacy, I went and washed the Victorinox knife, and the rest of my slicing was quick, effortless, and flawless.


Question: How many times a day has the speaker been using the timer?

I first bought the white version of this timer about ten years ago. At that time, it sold for $30, so at $15 it's a bargain; recently I bought the black version, which with its colored buttons looks cooler than white.For the last few years, I've used the old one at least ten times a day, without ever having to change batteries. I've dropped it a few times on a ceramic floor and otherwise abused it occasionally, but all three functions still work perfectly. It's simple to set, has a "batch feature" (meaning it recalls the previous setting when you turn it off) so you don't have to reset it when you continue to use a particular setting. It's meant to be carried around your neck, if you wish, so it's on the small side and the compact button layout might not be convenient for people with arthritis.It does what it was designed to do extremely well; what more can you ask?

Answer: at least ten times

I first bought the white version of this timer about ten years ago. At that time, it sold for $30, so at $15 it's a bargain; recently I bought the black version, which with its colored buttons looks cooler than white. <hl> For the last few years, I've used the old one at least ten times a day, without ever having to change batteries. <hl> I've dropped it a few times on a ceramic floor and otherwise abused it occasionally, but all three functions still work perfectly. It's simple to set, has a "batch feature" (meaning it recalls the previous setting when you turn it off) so you don't have to reset it when you continue to use a particular setting. It's meant to be carried around your neck, if you wish, so it's on the small side and the compact button layout might not be convenient for people with arthritis. It does what it was designed to do extremely well; what more can you ask?

I first bought the white version of this timer about ten years ago. At that time, it sold for $30, so at $15 it's a bargain; recently I bought the black version, which with its colored buttons looks cooler than white.For the last few years, I've used the old one <hl> at least ten times <hl> a day, without ever having to change batteries. I've dropped it a few times on a ceramic floor and otherwise abused it occasionally, but all three functions still work perfectly. It's simple to set, has a "batch feature" (meaning it recalls the previous setting when you turn it off) so you don't have to reset it when you continue to use a particular setting. It's meant to be carried around your neck, if you wish, so it's on the small side and the compact button layout might not be convenient for people with arthritis.It does what it was designed to do extremely well; what more can you ask?


Question: What model has replaceable blades?

This was surprisingly poorly made, especially given the price. The ceramic blade worked well enough but the entire body of the thing flexed when in use. You'd be so much better off with the smallest size Benriner from Japan like this oneBenriner Japanese Mandoline Slicerand this to protect your fingersMicroplane 34007 Kitchen Cut-Protection Glove. I seriously expected this to be of better quality given Kyocera's reputation.ThisOXO Good Grips Hand-Held Mandoline Slicerwasn't a good choice either. It worked okay, but the blades dulled in six uses or so.The Benriner has replaceable blades and is much more sturdily built than the Kyocera or OXO products. I can't recommend either of them.

Answer: Benriner

This was surprisingly poorly made, especially given the price. The ceramic blade worked well enough but the entire body of the thing flexed when in use. <hl> You'd be so much better off with the smallest size Benriner from Japan like this oneBenriner Japanese Mandoline Slicerand this to protect your fingersMicroplane 34007 Kitchen Cut-Protection Glove. <hl> I seriously expected this to be of better quality given Kyocera's reputation. ThisOXO Good Grips Hand-Held Mandoline Slicerwasn't a good choice either. It worked okay, but the blades dulled in six uses or so. The Benriner has replaceable blades and is much more sturdily built than the Kyocera or OXO products. I can't recommend either of them.

This was surprisingly poorly made, especially given the price. The ceramic blade worked well enough but the entire body of the thing flexed when in use. You'd be so much better off with the smallest size <hl> Benriner <hl> from Japan like this oneBenriner Japanese Mandoline Slicerand this to protect your fingersMicroplane 34007 Kitchen Cut-Protection Glove. I seriously expected this to be of better quality given Kyocera's reputation.ThisOXO Good Grips Hand-Held Mandoline Slicerwasn't a good choice either. It worked okay, but the blades dulled in six uses or so.The Benriner has replaceable blades and is much more sturdily built than the Kyocera or OXO products. I can't recommend either of them.


Question: how often is the filter changed?

I have been using this pitcher for about 9 months. First off, the taste of the water is great. It completely removed the chlorine odor and odd taste from my city water. The pitcher is well designed. It is pretty easy to clean and I only clean mine every two months when I change the filter. I have not detected any mold or odors with this cleaning frequency. I do keep my pitcher in the fridge all the time so I'm sure that helps. I was only buying two gallons of bottled water per week, but this has already paid for itself in less than a year. I know my water has been filtered now. You never know if bottled water is filtered or just bottled from a city tap.

Answer: every two months

I have been using this pitcher for about 9 months. First off, the taste of the water is great. It completely removed the chlorine odor and odd taste from my city water. The pitcher is well designed. <hl> It is pretty easy to clean and I only clean mine every two months when I change the filter. <hl> I have not detected any mold or odors with this cleaning frequency. I do keep my pitcher in the fridge all the time so I'm sure that helps. I was only buying two gallons of bottled water per week, but this has already paid for itself in less than a year. I know my water has been filtered now. You never know if bottled water is filtered or just bottled from a city tap.

I have been using this pitcher for about 9 months. First off, the taste of the water is great. It completely removed the chlorine odor and odd taste from my city water. The pitcher is well designed. It is pretty easy to clean and I only clean mine <hl> every two months <hl> when I change the filter. I have not detected any mold or odors with this cleaning frequency. I do keep my pitcher in the fridge all the time so I'm sure that helps. I was only buying two gallons of bottled water per week, but this has already paid for itself in less than a year. I know my water has been filtered now. You never know if bottled water is filtered or just bottled from a city tap.


Question: What did they use for their first try?

I have the larger Sanyo electric grill and it is great, just a little too big for my kitchen counter. (it is out in my RV, working great) But this baby is just right for my kitchen.It has a little less wattage than the bigger model but actually seems to heat up a little faster. I like the design of the grilling surface better than the design of the bigger unit (deeper grooves, and a good lip around the edge). I like the water tray that is black instead of aluminum in color, and it is easier to remove and pour the little amount of water out (1/2 cup of water is used to keep the smoke down).My cooking routine is to set it up, pour a 1/2 cup water into the tray, spray a little canola oil on the grill, turn the control up to high to pre-heat for about 3 minutes, then slap the seasoned steak, burger, chicken, ribs, etc. on the grill. I sear in some good grill marks on each side, then turn the heat down to medium and finish cooking at a slower pace, depending upon thickness of the piece being cooked. My first try was a T-Bone steak, and it was great!After the food is done, I turn the heat control off. For cleanup, I place a couple of dripping wet paper towels on the grill surface, turn the heat control back to high for a minute or so. When the steam starts rising of the wet towels, I shut of the power, and just wipe down the grill with those same paper towels, then dry, it cleans very easily.Nothing is quite like the burning and flames of a good charcole fire, but indoors or out, this cooks very, very well, with bare minumum of effort.I do recommend aluminum foil to cover the grill and the food to speed pre-heating and to keep splatters down. I think I may get some disposable shallow metal foil trays that match the grill size, to use as lids, they look like they should work well.

Answer: T-Bone steak

I have the larger Sanyo electric grill and it is great, just a little too big for my kitchen counter. (it is out in my RV, working great) But this baby is just right for my kitchen. It has a little less wattage than the bigger model but actually seems to heat up a little faster. I like the design of the grilling surface better than the design of the bigger unit (deeper grooves, and a good lip around the edge). I like the water tray that is black instead of aluminum in color, and it is easier to remove and pour the little amount of water out (1/2 cup of water is used to keep the smoke down).My cooking routine is to set it up, pour a 1/2 cup water into the tray, spray a little canola oil on the grill, turn the control up to high to pre-heat for about 3 minutes, then slap the seasoned steak, burger, chicken, ribs, etc. on the grill. I sear in some good grill marks on each side, then turn the heat down to medium and finish cooking at a slower pace, depending upon thickness of the piece being cooked. <hl> My first try was a T-Bone steak , and it was great!After the food is done, I turn the heat control off. <hl> For cleanup, I place a couple of dripping wet paper towels on the grill surface, turn the heat control back to high for a minute or so. When the steam starts rising of the wet towels, I shut of the power, and just wipe down the grill with those same paper towels, then dry, it cleans very easily. Nothing is quite like the burning and flames of a good charcole fire, but indoors or out, this cooks very, very well, with bare minumum of effort. I do recommend aluminum foil to cover the grill and the food to speed pre-heating and to keep splatters down. I think I may get some disposable shallow metal foil trays that match the grill size, to use as lids, they look like they should work well.

I have the larger Sanyo electric grill and it is great, just a little too big for my kitchen counter. (it is out in my RV, working great) But this baby is just right for my kitchen.It has a little less wattage than the bigger model but actually seems to heat up a little faster. I like the design of the grilling surface better than the design of the bigger unit (deeper grooves, and a good lip around the edge). I like the water tray that is black instead of aluminum in color, and it is easier to remove and pour the little amount of water out (1/2 cup of water is used to keep the smoke down).My cooking routine is to set it up, pour a 1/2 cup water into the tray, spray a little canola oil on the grill, turn the control up to high to pre-heat for about 3 minutes, then slap the seasoned steak, burger, chicken, ribs, etc. on the grill. I sear in some good grill marks on each side, then turn the heat down to medium and finish cooking at a slower pace, depending upon thickness of the piece being cooked. My first try was a <hl> T-Bone steak <hl>, and it was great!After the food is done, I turn the heat control off. For cleanup, I place a couple of dripping wet paper towels on the grill surface, turn the heat control back to high for a minute or so. When the steam starts rising of the wet towels, I shut of the power, and just wipe down the grill with those same paper towels, then dry, it cleans very easily.Nothing is quite like the burning and flames of a good charcole fire, but indoors or out, this cooks very, very well, with bare minumum of effort.I do recommend aluminum foil to cover the grill and the food to speed pre-heating and to keep splatters down. I think I may get some disposable shallow metal foil trays that match the grill size, to use as lids, they look like they should work well.

My first try was a <hl> T-Bone steak <hl> , and it was great!After the food is done, I turn the heat control off.