Question: What did the reviewer do after reading nearly every review on the product?

After reading nearly every review and what others liked and didn't like about this product, I tested it. Since I have lost so many eggs after putting them on the stove, walking away and forgetting about them until the burnt smell brought me running back, I thought an egg cooker would be the perfect answer. The automatic shut-off and the continuous loud ring were the plusses for me. The precise amount of water (with the measurement marked with a small piece of white tape because, yes, they are hard to read), 4 large eggs and 10 minutes later, I had a beautiful creamy center hard-boiled egg. Since I love h-b eggs, that was the point. If it didn't work the first time, this cooker would have gone back immediately.In the meantime, I also put 4 eggs into a pot of cool water on the stove. It took 10 minutes to boil and now I am timing 15 minutes for the cooking time, 25 minutes already. So this cooker is fine with me!Since I usually buy XL eggs, I am going to give them a try later. If the results are any different, I will add it to my review.2nd use - 5 beautifully fluffy XL hard-boiled eggs. NO buzzer!3rd use - 4 beautiful h-b eggs. NO buzzer!Returning this one. As this is the only one with automatic shut-off and continuous buzzer, I've ordered another one in the hopes that it will work for a good long time.

Answer: tested it

<hl> After reading nearly every review and what others liked and didn't like about this product, I tested it . <hl> Since I have lost so many eggs after putting them on the stove, walking away and forgetting about them until the burnt smell brought me running back, I thought an egg cooker would be the perfect answer. The automatic shut-off and the continuous loud ring were the plusses for me. The precise amount of water (with the measurement marked with a small piece of white tape because, yes, they are hard to read), 4 large eggs and 10 minutes later, I had a beautiful creamy center hard-boiled egg. Since I love h-b eggs, that was the point. If it didn't work the first time, this cooker would have gone back immediately. In the meantime, I also put 4 eggs into a pot of cool water on the stove. It took 10 minutes to boil and now I am timing 15 minutes for the cooking time, 25 minutes already. So this cooker is fine with me!Since I usually buy XL eggs, I am going to give them a try later. If the results are any different, I will add it to my review.2nd use - 5 beautifully fluffy XL hard-boiled eggs. NO buzzer!3rd use - 4 beautiful h-b eggs. NO buzzer!Returning this one. As this is the only one with automatic shut-off and continuous buzzer, I've ordered another one in the hopes that it will work for a good long time.

After reading nearly every review and what others liked and didn't like about this product, I <hl> tested it <hl>. Since I have lost so many eggs after putting them on the stove, walking away and forgetting about them until the burnt smell brought me running back, I thought an egg cooker would be the perfect answer. The automatic shut-off and the continuous loud ring were the plusses for me. The precise amount of water (with the measurement marked with a small piece of white tape because, yes, they are hard to read), 4 large eggs and 10 minutes later, I had a beautiful creamy center hard-boiled egg. Since I love h-b eggs, that was the point. If it didn't work the first time, this cooker would have gone back immediately.In the meantime, I also put 4 eggs into a pot of cool water on the stove. It took 10 minutes to boil and now I am timing 15 minutes for the cooking time, 25 minutes already. So this cooker is fine with me!Since I usually buy XL eggs, I am going to give them a try later. If the results are any different, I will add it to my review.2nd use - 5 beautifully fluffy XL hard-boiled eggs. NO buzzer!3rd use - 4 beautiful h-b eggs. NO buzzer!Returning this one. As this is the only one with automatic shut-off and continuous buzzer, I've ordered another one in the hopes that it will work for a good long time.

After reading nearly every review and what others liked and didn't like about this product, I <hl> tested it <hl> .


Question: Should I get a smaller model?

This programmable crock pot is a winner. Simple to use, does a great job and rather stylish. It is great to use when you have a crowd. The holidays are coming so here is the answer to making delicious food for the crowd without having to stand over a hot stove. You might want to get the new crock pot recipe book from the folks at Cooks Illustrated. It is the best crock pot recipe book available. With that book and this wonderful little kitchen helper, you are on your way to your guests smacking their lips and slapping you back. I can see you blushing already. If you want to cook for two or three you might want a smaller model because this baby only works good if it is at least a third full. A third full is a lot of food. Remember it is 6 1/2 quarts.

Answer: If you want to cook for two or three

This programmable crock pot is a winner. Simple to use, does a great job and rather stylish. It is great to use when you have a crowd. The holidays are coming so here is the answer to making delicious food for the crowd without having to stand over a hot stove. You might want to get the new crock pot recipe book from the folks at Cooks Illustrated. It is the best crock pot recipe book available. With that book and this wonderful little kitchen helper, you are on your way to your guests smacking their lips and slapping you back. I can see you blushing already. <hl> If you want to cook for two or three you might want a smaller model because this baby only works good if it is at least a third full. <hl> A third full is a lot of food. Remember it is 6 1/2 quarts.

This programmable crock pot is a winner. Simple to use, does a great job and rather stylish. It is great to use when you have a crowd. The holidays are coming so here is the answer to making delicious food for the crowd without having to stand over a hot stove. You might want to get the new crock pot recipe book from the folks at Cooks Illustrated. It is the best crock pot recipe book available. With that book and this wonderful little kitchen helper, you are on your way to your guests smacking their lips and slapping you back. I can see you blushing already. <hl> If you want to cook for two or three <hl> you might want a smaller model because this baby only works good if it is at least a third full. A third full is a lot of food. Remember it is 6 1/2 quarts.


Question: What kind of squeegee does the vacuum have?

I bought this vacuum to replace another small one that I have. This little baby really picks up stuff that my other one never did. It's light weight, perfect size for a one bedroom apartment with a mix of hardwood and carpeted floors, and easily glides from one surface to another. It has a anti scratch resistant squeegee blade that picks up the smallest dirt on hardwood floors and the rotary brush assembly does an excellent job on the carpet plus bristles for the corners that more expensive vacuums have. Since I've only had it for a week, the test will be how well it works (has a 1 year warranty) in the long run, but for the price I can't complain.

Answer: anti scratch resistant

I bought this vacuum to replace another small one that I have. This little baby really picks up stuff that my other one never did. It's light weight, perfect size for a one bedroom apartment with a mix of hardwood and carpeted floors, and easily glides from one surface to another. <hl> It has a anti scratch resistant squeegee blade that picks up the smallest dirt on hardwood floors and the rotary brush assembly does an excellent job on the carpet plus bristles for the corners that more expensive vacuums have. <hl> Since I've only had it for a week, the test will be how well it works (has a 1 year warranty) in the long run, but for the price I can't complain.

I bought this vacuum to replace another small one that I have. This little baby really picks up stuff that my other one never did. It's light weight, perfect size for a one bedroom apartment with a mix of hardwood and carpeted floors, and easily glides from one surface to another. It has a <hl> anti scratch resistant <hl> squeegee blade that picks up the smallest dirt on hardwood floors and the rotary brush assembly does an excellent job on the carpet plus bristles for the corners that more expensive vacuums have. Since I've only had it for a week, the test will be how well it works (has a 1 year warranty) in the long run, but for the price I can't complain.


Question: What was the problem with the product?

I have been watching this desk for months. I read all the reviews and when it went down in price with free shipping, I decided to take my chances.The desk arrived within days, to which I was very pleased. As said by other reviews, there was not adequate packing materials to protect the wood. I inspected the pieces of wood as I removed them from the box and noticed a split on the front piece to the left of the keyboard door. I thought if it had to be damaged, why not in a less visual area. I used some wood glue and fixed the problem. Assembly took less than an hour. I just needed a phillips screw driver for the screw behind the knob on the keyboard door. The legs came with their own tool for the nuts/bolts. The wood is beautiful and matches the honey pine furniture I have in the room where this desk is now located. I have a 22" flat screen monitor and an HP printer on it and have plenty of room to work. The actual PC is on the floor under the desk. There is room for it on the desk, but I don't like a cluttered look.Again, this is one of those items that you have to take your chances hoping it is not damaged with you receive it. I doubt the company would reimburse me a percentage off due to the damage. I decided to live with the damage as it would be too costly to return it and take my chances on a new one, which could be damaged even more.Less the damage, it is a great quality piece of furniture.

Answer: a split on the front piece

I have been watching this desk for months. I read all the reviews and when it went down in price with free shipping, I decided to take my chances. The desk arrived within days, to which I was very pleased. As said by other reviews, there was not adequate packing materials to protect the wood. <hl> I inspected the pieces of wood as I removed them from the box and noticed a split on the front piece to the left of the keyboard door. <hl> I thought if it had to be damaged, why not in a less visual area. I used some wood glue and fixed the problem. Assembly took less than an hour. I just needed a phillips screw driver for the screw behind the knob on the keyboard door. The legs came with their own tool for the nuts/bolts. The wood is beautiful and matches the honey pine furniture I have in the room where this desk is now located. I have a 22" flat screen monitor and an HP printer on it and have plenty of room to work. The actual PC is on the floor under the desk. There is room for it on the desk, but I don't like a cluttered look. Again, this is one of those items that you have to take your chances hoping it is not damaged with you receive it. I doubt the company would reimburse me a percentage off due to the damage. I decided to live with the damage as it would be too costly to return it and take my chances on a new one, which could be damaged even more. Less the damage, it is a great quality piece of furniture.

I have been watching this desk for months. I read all the reviews and when it went down in price with free shipping, I decided to take my chances.The desk arrived within days, to which I was very pleased. As said by other reviews, there was not adequate packing materials to protect the wood. I inspected the pieces of wood as I removed them from the box and noticed <hl> a split on the front piece <hl> to the left of the keyboard door. I thought if it had to be damaged, why not in a less visual area. I used some wood glue and fixed the problem. Assembly took less than an hour. I just needed a phillips screw driver for the screw behind the knob on the keyboard door. The legs came with their own tool for the nuts/bolts. The wood is beautiful and matches the honey pine furniture I have in the room where this desk is now located. I have a 22" flat screen monitor and an HP printer on it and have plenty of room to work. The actual PC is on the floor under the desk. There is room for it on the desk, but I don't like a cluttered look.Again, this is one of those items that you have to take your chances hoping it is not damaged with you receive it. I doubt the company would reimburse me a percentage off due to the damage. I decided to live with the damage as it would be too costly to return it and take my chances on a new one, which could be damaged even more.Less the damage, it is a great quality piece of furniture.


Question: Which brand is talked about?

When I received this set, I was surprised to learn that the manufacturer does not recommend using them on ceramic or glass top stoves. The product description here lists ceramic as a suitable stove top, and doesn't specifically mention glass tops at all. But if you go on the Rachael Ray site and look for this product, you will see the following:"Special Features : Not Recommended for use on Ceramic/Glasstop Stoves"That's a "special feature"? ;) Too bad it isn't "special" enough to list on this product's description. I submitted a request that this information be added.From the looks of this product, I wouldn't be surprised if the coating scratched easily (even if you never put it in the dishwasher, which is always a big no-no with coated cookware like this). These skillets do not appear to be very good quality.

Answer: Rachael Ray

When I received this set, I was surprised to learn that the manufacturer does not recommend using them on ceramic or glass top stoves. The product description here lists ceramic as a suitable stove top, and doesn't specifically mention glass tops at all. <hl> But if you go on the Rachael Ray site and look for this product, you will see the following:"Special Features : Not Recommended for use on Ceramic/Glasstop Stoves"That's a "special feature"? <hl> ;) Too bad it isn't "special" enough to list on this product's description. I submitted a request that this information be added. From the looks of this product, I wouldn't be surprised if the coating scratched easily (even if you never put it in the dishwasher, which is always a big no-no with coated cookware like this). These skillets do not appear to be very good quality.

When I received this set, I was surprised to learn that the manufacturer does not recommend using them on ceramic or glass top stoves. The product description here lists ceramic as a suitable stove top, and doesn't specifically mention glass tops at all. But if you go on the <hl> Rachael Ray <hl> site and look for this product, you will see the following:"Special Features : Not Recommended for use on Ceramic/Glasstop Stoves"That's a "special feature"? ;) Too bad it isn't "special" enough to list on this product's description. I submitted a request that this information be added.From the looks of this product, I wouldn't be surprised if the coating scratched easily (even if you never put it in the dishwasher, which is always a big no-no with coated cookware like this). These skillets do not appear to be very good quality.


Question: How often do I cook?

I cook every night for a family of 5. I recently acquired the Lodge Double Dutch 5 qt. dutch oven and fell in love with cast iron. I ordered this skillet thinking the bigger size would be good to cook for my large family and I was right, but when I say it's big I mean it's MASSIVE (and heavy!). I wiped it down with some flax seed oil and put it into my heated oven and it fit with very little wiggle room. It certainly will not fit in my cabinets so it will have to live on my stove-top which is just fine by me.A lot of reviewers have complained about the "rough" finish on the inside of the skillet. To me, it doesn't seem that rough. There is a definite texture to it but nothing that will totally destroy the integrity of your food, in my opinion. Don't let a little texture steer you away from buying this bargain-priced skillet - you can always season, season, season to get that smooth patina cast iron is renowned for.One thing to note is that the product picture indicates that there are two pour spouts between each handle. My skillet does not have the pour spouts. That's slightly disappointing but this skillet is so heavy that I doubt I will be able to gracefully pour anything out of this thing, pour spouts or not. Amazon should update its picture of the product.All in all, I am thrilled with my beast of a skillet. The size is great for my large family but if you aren't cooking for a bunch of people I think this skillet may be overkill for you. Try a 12-in or even a 10.5 in. skillet.Edit: I just received the 12-in rooster pan as a gift and I am thrilled! The rooster design adds a homey touch to our otherwise contemporary kitchen. I use the 15 inch skillet every day but it takes up so much room on my stovetop that it is difficult to cook two things at a time. Now I can easily use my 12 inch and 10.5 inch skillets on the stovetop while the big boy 15 incher is baking in the oven. I cannot get enough of cast iron!

Answer: every night

I cook every night for a family of 5.

<hl> I cook every night for a family of 5. <hl> I recently acquired the Lodge Double Dutch 5 qt. dutch oven and fell in love with cast iron. I ordered this skillet thinking the bigger size would be good to cook for my large family and I was right, but when I say it's big I mean it's MASSIVE (and heavy!). I wiped it down with some flax seed oil and put it into my heated oven and it fit with very little wiggle room. It certainly will not fit in my cabinets so it will have to live on my stove-top which is just fine by me. A lot of reviewers have complained about the "rough" finish on the inside of the skillet. To me, it doesn't seem that rough. There is a definite texture to it but nothing that will totally destroy the integrity of your food, in my opinion. Don't let a little texture steer you away from buying this bargain-priced skillet - you can always season, season, season to get that smooth patina cast iron is renowned for. One thing to note is that the product picture indicates that there are two pour spouts between each handle. My skillet does not have the pour spouts. That's slightly disappointing but this skillet is so heavy that I doubt I will be able to gracefully pour anything out of this thing, pour spouts or not. Amazon should update its picture of the product. All in all, I am thrilled with my beast of a skillet. The size is great for my large family but if you aren't cooking for a bunch of people I think this skillet may be overkill for you. Try a 12-in or even a 10.5 in. skillet. Edit: I just received the 12-in rooster pan as a gift and I am thrilled! The rooster design adds a homey touch to our otherwise contemporary kitchen. I use the 15 inch skillet every day but it takes up so much room on my stovetop that it is difficult to cook two things at a time. Now I can easily use my 12 inch and 10.5 inch skillets on the stovetop while the big boy 15 incher is baking in the oven. I cannot get enough of cast iron!

I cook <hl> every night <hl> for a family of 5. I recently acquired the Lodge Double Dutch 5 qt. dutch oven and fell in love with cast iron. I ordered this skillet thinking the bigger size would be good to cook for my large family and I was right, but when I say it's big I mean it's MASSIVE (and heavy!). I wiped it down with some flax seed oil and put it into my heated oven and it fit with very little wiggle room. It certainly will not fit in my cabinets so it will have to live on my stove-top which is just fine by me.A lot of reviewers have complained about the "rough" finish on the inside of the skillet. To me, it doesn't seem that rough. There is a definite texture to it but nothing that will totally destroy the integrity of your food, in my opinion. Don't let a little texture steer you away from buying this bargain-priced skillet - you can always season, season, season to get that smooth patina cast iron is renowned for.One thing to note is that the product picture indicates that there are two pour spouts between each handle. My skillet does not have the pour spouts. That's slightly disappointing but this skillet is so heavy that I doubt I will be able to gracefully pour anything out of this thing, pour spouts or not. Amazon should update its picture of the product.All in all, I am thrilled with my beast of a skillet. The size is great for my large family but if you aren't cooking for a bunch of people I think this skillet may be overkill for you. Try a 12-in or even a 10.5 in. skillet.Edit: I just received the 12-in rooster pan as a gift and I am thrilled! The rooster design adds a homey touch to our otherwise contemporary kitchen. I use the 15 inch skillet every day but it takes up so much room on my stovetop that it is difficult to cook two things at a time. Now I can easily use my 12 inch and 10.5 inch skillets on the stovetop while the big boy 15 incher is baking in the oven. I cannot get enough of cast iron!


Question: What temperature did I use to bake?

I've been served individual mini-loaves of warm bread in restaurants and wanted to do the same at home. This loaf pan works precisely as advertised and produced twelve perfect sourdough rolls shaped like a tiny loaf of bread. The instructions warn that the dough may stick and advise you to grease it the first time you use it; I didn't and had no sticking problems whatsoever. Also, it's floppy so you will need to put it on top of a cookie sheet which will help brown the bottom of the bread.Here's the recipe I used. I usually bake my sourdough hotter than this, but the instructions say that 446 degrees is as hot as it should go so I baked at 450. It's a simple sweet-and-sour bread that would probably work fine without the starter, or you could try adding a bit of lemon juice or using buttermilk in place of some of the water.Honey Sourdough Rolls75 g (approximately 1/3 cup) stiff sourdough starter375 g (3/4 c minus 1/2 t) lukewarm water500 g all purpose flour (about 4 cups)2 T honey1 t salt t yeastMethod: Mix starter and water thoroughly; stir in flour; allow to rest (autolyse) 30-60 minutes. Evenly distribute honey, salt and yeast over the top of the dough and mix thoroughly with your hands or a spoon or dough scraper. Allow to proof at room temperature 2 hours; the mixture will rise somewhat and become more liquid and bubbly. Spoon equal portions into mini-loaf mold and rise 60 minutes. Meanwhile, preheat oven with a cookie sheet inside to 450 degrees. Place the mini-loaf mold on top of preheated cookie sheet and bake 25-35 minutes until tops are well browned. Serve warm.

Answer: 450 degrees

I've been served individual mini-loaves of warm bread in restaurants and wanted to do the same at home. This loaf pan works precisely as advertised and produced twelve perfect sourdough rolls shaped like a tiny loaf of bread. The instructions warn that the dough may stick and advise you to grease it the first time you use it; I didn't and had no sticking problems whatsoever. Also, it's floppy so you will need to put it on top of a cookie sheet which will help brown the bottom of the bread. Here's the recipe I used. I usually bake my sourdough hotter than this, but the instructions say that 446 degrees is as hot as it should go so I baked at 450. It's a simple sweet-and-sour bread that would probably work fine without the starter, or you could try adding a bit of lemon juice or using buttermilk in place of some of the water. Honey Sourdough Rolls75 g (approximately 1/3 cup) stiff sourdough starter375 g (3/4 c minus 1/2 t) lukewarm water500 g all purpose flour (about 4 cups)2 T honey1 t salt t yeastMethod: Mix starter and water thoroughly; stir in flour; allow to rest (autolyse) 30-60 minutes. Evenly distribute honey, salt and yeast over the top of the dough and mix thoroughly with your hands or a spoon or dough scraper. Allow to proof at room temperature 2 hours; the mixture will rise somewhat and become more liquid and bubbly. Spoon equal portions into mini-loaf mold and rise 60 minutes. <hl> Meanwhile, preheat oven with a cookie sheet inside to 450 degrees . <hl> Place the mini-loaf mold on top of preheated cookie sheet and bake 25-35 minutes until tops are well browned. Serve warm.

I've been served individual mini-loaves of warm bread in restaurants and wanted to do the same at home. This loaf pan works precisely as advertised and produced twelve perfect sourdough rolls shaped like a tiny loaf of bread. The instructions warn that the dough may stick and advise you to grease it the first time you use it; I didn't and had no sticking problems whatsoever. Also, it's floppy so you will need to put it on top of a cookie sheet which will help brown the bottom of the bread.Here's the recipe I used. I usually bake my sourdough hotter than this, but the instructions say that 446 degrees is as hot as it should go so I baked at 450. It's a simple sweet-and-sour bread that would probably work fine without the starter, or you could try adding a bit of lemon juice or using buttermilk in place of some of the water.Honey Sourdough Rolls75 g (approximately 1/3 cup) stiff sourdough starter375 g (3/4 c minus 1/2 t) lukewarm water500 g all purpose flour (about 4 cups)2 T honey1 t salt t yeastMethod: Mix starter and water thoroughly; stir in flour; allow to rest (autolyse) 30-60 minutes. Evenly distribute honey, salt and yeast over the top of the dough and mix thoroughly with your hands or a spoon or dough scraper. Allow to proof at room temperature 2 hours; the mixture will rise somewhat and become more liquid and bubbly. Spoon equal portions into mini-loaf mold and rise 60 minutes. Meanwhile, preheat oven with a cookie sheet inside to <hl> 450 degrees <hl>. Place the mini-loaf mold on top of preheated cookie sheet and bake 25-35 minutes until tops are well browned. Serve warm.

Meanwhile, preheat oven with a cookie sheet inside to <hl> 450 degrees <hl> .


Question: What is the only negative of the product?

This came in very handy during a recent move. I used the large bag to carry frozen meat. I travelled for two hours and had to wait in a hot car for about twenty minutes. When I removed the meat from the bag, it was still mostly frozen. Only one end was beginning to thaw. For an ordinary shopping trip, this bag would be ideal for groceries. The only negative is that the construction could be better. After only one use, the zipper has broken. I really like the bag that folds into a small package. This came in handy for transporting some clean laundry. It's small size and the clip make it very easy to keep handy.

Answer: the construction could be better

This came in very handy during a recent move. I used the large bag to carry frozen meat. I travelled for two hours and had to wait in a hot car for about twenty minutes. When I removed the meat from the bag, it was still mostly frozen. Only one end was beginning to thaw. For an ordinary shopping trip, this bag would be ideal for groceries. <hl> The only negative is that the construction could be better . <hl> After only one use, the zipper has broken. I really like the bag that folds into a small package. This came in handy for transporting some clean laundry. It's small size and the clip make it very easy to keep handy.

This came in very handy during a recent move. I used the large bag to carry frozen meat. I travelled for two hours and had to wait in a hot car for about twenty minutes. When I removed the meat from the bag, it was still mostly frozen. Only one end was beginning to thaw. For an ordinary shopping trip, this bag would be ideal for groceries. The only negative is that <hl> the construction could be better <hl>. After only one use, the zipper has broken. I really like the bag that folds into a small package. This came in handy for transporting some clean laundry. It's small size and the clip make it very easy to keep handy.

The only negative is that <hl> the construction could be better <hl> .


Question: What brand of trash cans is the person talking about?

Was looking for a lidded trashcan to hold a decent amount of baby diapers without being too large. I have the smaller (4.5 L) and larger (30L) Simple Human trash cans, an wanted something in between that would hold smells in well.Baby's not here yet to test with diapers, but we tried it out with food garbage. Unlike some of the other Simple Human trashcans meant for the kitchen, I think the heft of the metal lid on this one keep smells more well contained. Size is just right for our needs. Love that the lid closes slowly and quietly, so it won't wake up baby. Retro design is awesome, but a little bulky.Expensive, but a very good quality product.

Answer: Simple Human

Was looking for a lidded trashcan to hold a decent amount of baby diapers without being too large. <hl> I have the smaller (4.5 L) and larger (30L) Simple Human trash cans, an wanted something in between that would hold smells in well. <hl> Baby's not here yet to test with diapers, but we tried it out with food garbage. Unlike some of the other Simple Human trashcans meant for the kitchen, I think the heft of the metal lid on this one keep smells more well contained. Size is just right for our needs. Love that the lid closes slowly and quietly, so it won't wake up baby. Retro design is awesome, but a little bulky. Expensive, but a very good quality product.

Was looking for a lidded trashcan to hold a decent amount of baby diapers without being too large. I have the smaller (4.5 L) and larger (30L) <hl> Simple Human <hl> trash cans, an wanted something in between that would hold smells in well.Baby's not here yet to test with diapers, but we tried it out with food garbage. Unlike some of the other Simple Human trashcans meant for the kitchen, I think the heft of the metal lid on this one keep smells more well contained. Size is just right for our needs. Love that the lid closes slowly and quietly, so it won't wake up baby. Retro design is awesome, but a little bulky.Expensive, but a very good quality product.


Question: which model would the writer not buy again?

I purchased this ice cream maker in 2007 (winter) for $39.99 but did not use it until summer of 2008. This is my second krups. The first one, La Glaciere #358, was purchased in 2000 or so. There were problems with the older model after 5 years of use (and it is still going with problem noted). The bowl left in the freezer became warped and the top would not stay on completely when the ice cream was being made. That being said, it is still better than the most recent one. This one is definitely not worth $130.00. I made ice cream in both of them during Thanksgiving, side by side, and the older one, more heavy duty appear to "churn" to a better consistency. This newer one feels cheaper and the motor doesn't seem to be as powerful. I would not buy the GVS142 again.

Answer: GVS142

I would not buy the GVS142 again.

I purchased this ice cream maker in 2007 (winter) for $39.99 but did not use it until summer of 2008. This is my second krups. The first one, La Glaciere #358, was purchased in 2000 or so. There were problems with the older model after 5 years of use (and it is still going with problem noted). The bowl left in the freezer became warped and the top would not stay on completely when the ice cream was being made. That being said, it is still better than the most recent one. This one is definitely not worth $130.00. I made ice cream in both of them during Thanksgiving, side by side, and the older one, more heavy duty appear to "churn" to a better consistency. This newer one feels cheaper and the motor doesn't seem to be as powerful. <hl> I would not buy the GVS142 again. <hl>

I purchased this ice cream maker in 2007 (winter) for $39.99 but did not use it until summer of 2008. This is my second krups. The first one, La Glaciere #358, was purchased in 2000 or so. There were problems with the older model after 5 years of use (and it is still going with problem noted). The bowl left in the freezer became warped and the top would not stay on completely when the ice cream was being made. That being said, it is still better than the most recent one. This one is definitely not worth $130.00. I made ice cream in both of them during Thanksgiving, side by side, and the older one, more heavy duty appear to "churn" to a better consistency. This newer one feels cheaper and the motor doesn't seem to be as powerful. I would not buy the <hl> GVS142 <hl> again.


Question: How often do the filters need to be replaced?

These charcoal water filters are identical to the expensive ones I used to purchase from Cusinart. Not to mention, there were only a few retailers that even carried them. Now they will be replaced once a month like they would be. I was happy to find these in a large quantity at a great price.

Answer: once a month

These charcoal water filters are identical to the expensive ones I used to purchase from Cusinart. Not to mention, there were only a few retailers that even carried them. <hl> Now they will be replaced once a month like they would be. <hl> I was happy to find these in a large quantity at a great price.

These charcoal water filters are identical to the expensive ones I used to purchase from Cusinart. Not to mention, there were only a few retailers that even carried them. Now they will be replaced <hl> once a month <hl> like they would be. I was happy to find these in a large quantity at a great price.


Question: What kind of coffee maker have I always had?

I have always had an economical coffee maker like the Black and Decker DCM2500 but lately I have had to buy one after another, trying different brands each time. This one makes good coffee, just right temp, love the auto shut-off feature and is easy to fill. My problem is with the burner plate. It has been burning through and now rusting since we got it. The carafe has rust spots (I have a hard time removing)in the 2 places it sits over. The maker still works but I am worried it will catch fire or bust the glass carafe if not replaced. So I give it a 3 star rating. Not the worst I have ever had but not worth the money if I have to continually replace them. I am going with a new coffee maker that costs 3 times as much but maybe it will last at least 3 times longer.

Answer: an economical coffee maker

<hl> I have always had an economical coffee maker like the Black and Decker DCM2500 <hl> but lately I have had to buy one after another, trying different brands each time. This one makes good coffee, just right temp, love the auto shut-off feature and is easy to fill. My problem is with the burner plate. It has been burning through and now rusting since we got it. The carafe has rust spots (I have a hard time removing)in the 2 places it sits over. The maker still works but I am worried it will catch fire or bust the glass carafe if not replaced. So I give it a 3 star rating. Not the worst I have ever had but not worth the money if I have to continually replace them. I am going with a new coffee maker that costs 3 times as much but maybe it will last at least 3 times longer.

I have always had <hl> an economical coffee maker <hl> like the Black and Decker DCM2500 but lately I have had to buy one after another, trying different brands each time. This one makes good coffee, just right temp, love the auto shut-off feature and is easy to fill. My problem is with the burner plate. It has been burning through and now rusting since we got it. The carafe has rust spots (I have a hard time removing)in the 2 places it sits over. The maker still works but I am worried it will catch fire or bust the glass carafe if not replaced. So I give it a 3 star rating. Not the worst I have ever had but not worth the money if I have to continually replace them. I am going with a new coffee maker that costs 3 times as much but maybe it will last at least 3 times longer.


Question: what quality of this product does the reviewer like?

First of all, this is exactly what I was looking for as far as asthetics go. It looks naturally aged. But...I wish it were a better opener. It does open bottles but you have to really snug it up against the top of the opener. Sometimes more than once. I don't know what's so hard about recreating a bottle opener that has been a standard for so long.

Answer: asthetics

<hl> First of all, this is exactly what I was looking for as far as asthetics go. <hl> It looks naturally aged. But...I wish it were a better opener. It does open bottles but you have to really snug it up against the top of the opener. Sometimes more than once. I don't know what's so hard about recreating a bottle opener that has been a standard for so long.

First of all, this is exactly what I was looking for as far as <hl> asthetics <hl> go. It looks naturally aged. But...I wish it were a better opener. It does open bottles but you have to really snug it up against the top of the opener. Sometimes more than once. I don't know what's so hard about recreating a bottle opener that has been a standard for so long.


Question: What did the author use to roll out?

I disagree that Wilton is easy to roll out - perhaps that was on an extremely hot day in a very humid house?! I can't tell you how crappy this fondant is to work with. it is so stiff. My husband and I tried it several times (thinking maybe at first we just got a bad box) we both sat with half the box each and worked it until our hands were sore to get it vaguely softened. Then I tried to roll it out, it was so stiff I was using my whole body weight to roll it. My husband rolled it out with difficulty. By the time you've managed to roll it thin enough (all that effort takes time) it has dried out and cracks as it folds over the cake. Terrible fondant. SATIN ICE is much much better, more pliable, easier to roll out and much nicer flavor. Wilton flavor is kinda ok, it's not discusting like some say but SATIN ICE is so much nicer and also comes in many different flavors like vanilla or buttercream - even chocolate! whereas Wilton comes in one fake flavor. Stay away from Wilton!!!!

Answer: whole body weight

I disagree that Wilton is easy to roll out - perhaps that was on an extremely hot day in a very humid house?! I can't tell you how crappy this fondant is to work with. it is so stiff. My husband and I tried it several times (thinking maybe at first we just got a bad box) we both sat with half the box each and worked it until our hands were sore to get it vaguely softened. <hl> Then I tried to roll it out, it was so stiff I was using my whole body weight to roll it. <hl> My husband rolled it out with difficulty. By the time you've managed to roll it thin enough (all that effort takes time) it has dried out and cracks as it folds over the cake. Terrible fondant. SATIN ICE is much much better, more pliable, easier to roll out and much nicer flavor. Wilton flavor is kinda ok, it's not discusting like some say but SATIN ICE is so much nicer and also comes in many different flavors like vanilla or buttercream - even chocolate! whereas Wilton comes in one fake flavor. Stay away from Wilton!!!!

I disagree that Wilton is easy to roll out - perhaps that was on an extremely hot day in a very humid house?! I can't tell you how crappy this fondant is to work with. it is so stiff. My husband and I tried it several times (thinking maybe at first we just got a bad box) we both sat with half the box each and worked it until our hands were sore to get it vaguely softened. Then I tried to roll it out, it was so stiff I was using my <hl> whole body weight <hl> to roll it. My husband rolled it out with difficulty. By the time you've managed to roll it thin enough (all that effort takes time) it has dried out and cracks as it folds over the cake. Terrible fondant. SATIN ICE is much much better, more pliable, easier to roll out and much nicer flavor. Wilton flavor is kinda ok, it's not discusting like some say but SATIN ICE is so much nicer and also comes in many different flavors like vanilla or buttercream - even chocolate! whereas Wilton comes in one fake flavor. Stay away from Wilton!!!!


Question: What does the strainer have two of?

This is an absolutely perfect size. It is not so big that you won't find a place to store it, but large enough to hold a bunch of angel hair pasta that would slip right out of the little holes in a traditional colander. It also fits over the sink so that I can pour the pasta (or whatever I'm draining) right into it, water and all, and have the water drain into the sink.It doesn't say in the description, but this is a double weave strainer. In other words, there are two layers of thin metal mesh to ensure even the smallest seeds and particles are caught in the net.It has a traditional soft black rubber Oxo handle, too. This is important when using it over the sink as it keeps it from slipping around when the water hits it.Nice!

Answer: layers of thin metal mesh

This is an absolutely perfect size. It is not so big that you won't find a place to store it, but large enough to hold a bunch of angel hair pasta that would slip right out of the little holes in a traditional colander. It also fits over the sink so that I can pour the pasta (or whatever I'm draining) right into it, water and all, and have the water drain into the sink. It doesn't say in the description, but this is a double weave strainer. <hl> In other words, there are two layers of thin metal mesh to ensure even the smallest seeds and particles are caught in the net. <hl> It has a traditional soft black rubber Oxo handle, too. This is important when using it over the sink as it keeps it from slipping around when the water hits it. Nice!

This is an absolutely perfect size. It is not so big that you won't find a place to store it, but large enough to hold a bunch of angel hair pasta that would slip right out of the little holes in a traditional colander. It also fits over the sink so that I can pour the pasta (or whatever I'm draining) right into it, water and all, and have the water drain into the sink.It doesn't say in the description, but this is a double weave strainer. In other words, there are two <hl> layers of thin metal mesh <hl> to ensure even the smallest seeds and particles are caught in the net.It has a traditional soft black rubber Oxo handle, too. This is important when using it over the sink as it keeps it from slipping around when the water hits it.Nice!


Question: What did these versions have?

This travel mug is great. We've gone through a lot of travel mugs in this house and my husband and I have never found one that we really liked until this one. We have one of the older versions without the easy clean lid and this version is much improved. Basically the inner part of the cup opens for easier cleaning. I still find it easiest to put some really hot water in it and leave it up side down for a while before washing it to make sure it's clean. Coffee stays really hot in this for a very long time. This fits well in standard cup holders and doesn't spill or leak.

Answer: easy clean lid

This travel mug is great. We've gone through a lot of travel mugs in this house and my husband and I have never found one that we really liked until this one. <hl> We have one of the older versions without the easy clean lid and this version is much improved. <hl> Basically the inner part of the cup opens for easier cleaning. I still find it easiest to put some really hot water in it and leave it up side down for a while before washing it to make sure it's clean. Coffee stays really hot in this for a very long time. This fits well in standard cup holders and doesn't spill or leak.

This travel mug is great. We've gone through a lot of travel mugs in this house and my husband and I have never found one that we really liked until this one. We have one of the older versions without the <hl> easy clean lid <hl> and this version is much improved. Basically the inner part of the cup opens for easier cleaning. I still find it easiest to put some really hot water in it and leave it up side down for a while before washing it to make sure it's clean. Coffee stays really hot in this for a very long time. This fits well in standard cup holders and doesn't spill or leak.


Question: What does ther reviewer use to cover the pool equipment?

My swimming pool equipment sits out in the open. On the rare occasions when the temperature gets below freezing, I cover the equipment with a couple of mover's pads and, up to now, put a contraption with four incandescent light bulbs on it under the cover. But, with the demise of incandescent bulbs, I came up with this idea. The heater is small, and it doesn't put out many BTU's, but I think it will be adequate for me needs, and it is small enough for me to put it under the equipment cover without it being a fire hazard.

Answer: a couple of mover's pads

My swimming pool equipment sits out in the open. <hl> On the rare occasions when the temperature gets below freezing, I cover the equipment with a couple of mover's pads and, up to now, put a contraption with four incandescent light bulbs on it under the cover. <hl> But, with the demise of incandescent bulbs, I came up with this idea. The heater is small, and it doesn't put out many BTU's, but I think it will be adequate for me needs, and it is small enough for me to put it under the equipment cover without it being a fire hazard.

My swimming pool equipment sits out in the open. On the rare occasions when the temperature gets below freezing, I cover the equipment with <hl> a couple of mover's pads <hl> and, up to now, put a contraption with four incandescent light bulbs on it under the cover. But, with the demise of incandescent bulbs, I came up with this idea. The heater is small, and it doesn't put out many BTU's, but I think it will be adequate for me needs, and it is small enough for me to put it under the equipment cover without it being a fire hazard.


Question: What product is being discussed?

I wish the description for it was better. I wouldn't have bought if I knew more about it.There is a disk inside it (with holes). I'm still not sure why (I'll explain in a second). It's attached to a metal wire which is what one would use to fish it out of the pot or cup. The tea ball itslf comes apart at the middle. So if you put some tea in the bottom half, then put it together, the only thing the disk could pissible do is agitate the contents of the tea ball becuase once you want it out of the cup or pot, you pull on the wire and the disk goes back to the top of the ball.As others have said, the instructions are worthless. If a manufacturer introduces something new, they really should document it better so people know what the intent was.I used it twice and put it in the dishwasher twice and it has permanent marks from the tea (tea leaf stains) on it. I put it in the trash can yesterday.My advice is get the infusers that fit on top of the cup or teapot: Nothing to take apart when you're done, most are dishwasher safe, and you can get them in finer mesh so little tea leaves can't escape.

Answer: tea ball

I wish the description for it was better. I wouldn't have bought if I knew more about it. There is a disk inside it (with holes). I'm still not sure why (I'll explain in a second). It's attached to a metal wire which is what one would use to fish it out of the pot or cup. <hl> The tea ball itslf comes apart at the middle. <hl> So if you put some tea in the bottom half, then put it together, the only thing the disk could pissible do is agitate the contents of the tea ball becuase once you want it out of the cup or pot, you pull on the wire and the disk goes back to the top of the ball. As others have said, the instructions are worthless. If a manufacturer introduces something new, they really should document it better so people know what the intent was. I used it twice and put it in the dishwasher twice and it has permanent marks from the tea (tea leaf stains) on it. I put it in the trash can yesterday. My advice is get the infusers that fit on top of the cup or teapot: Nothing to take apart when you're done, most are dishwasher safe, and you can get them in finer mesh so little tea leaves can't escape.

I wish the description for it was better. I wouldn't have bought if I knew more about it.There is a disk inside it (with holes). I'm still not sure why (I'll explain in a second). It's attached to a metal wire which is what one would use to fish it out of the pot or cup. The <hl> tea ball <hl> itslf comes apart at the middle. So if you put some tea in the bottom half, then put it together, the only thing the disk could pissible do is agitate the contents of the tea ball becuase once you want it out of the cup or pot, you pull on the wire and the disk goes back to the top of the ball.As others have said, the instructions are worthless. If a manufacturer introduces something new, they really should document it better so people know what the intent was.I used it twice and put it in the dishwasher twice and it has permanent marks from the tea (tea leaf stains) on it. I put it in the trash can yesterday.My advice is get the infusers that fit on top of the cup or teapot: Nothing to take apart when you're done, most are dishwasher safe, and you can get them in finer mesh so little tea leaves can't escape.


Question: How long does the device take to cool the entire room in question?

I hooked this thing up myself and I'm not terribly handy. I had a little trouble hooking the plastic pieces onto the hose but finally figured out they need to go counterclockwise. Doh!It works like a champ--gets my room cool in 20 minutes (about 300 sq ft). It's pretty heavy, which will be prohibitive to my moving it up and downstairs, but it's doable, if somewhat awkward.I love the automatic room temperature--the fan stays on and the air conditioner turns on only when needed. It has other automated settings I have yet to try but that look helpful.I love the remote! I can adjust it while still lying in bed. Sweet!

Answer: 20 minutes

I hooked this thing up myself and I'm not terribly handy. I had a little trouble hooking the plastic pieces onto the hose but finally figured out they need to go counterclockwise. <hl> Doh!It works like a champ--gets my room cool in 20 minutes (about 300 sq ft). <hl> It's pretty heavy, which will be prohibitive to my moving it up and downstairs, but it's doable, if somewhat awkward. I love the automatic room temperature--the fan stays on and the air conditioner turns on only when needed. It has other automated settings I have yet to try but that look helpful. I love the remote! I can adjust it while still lying in bed. Sweet!

I hooked this thing up myself and I'm not terribly handy. I had a little trouble hooking the plastic pieces onto the hose but finally figured out they need to go counterclockwise. Doh!It works like a champ--gets my room cool in <hl> 20 minutes <hl> (about 300 sq ft). It's pretty heavy, which will be prohibitive to my moving it up and downstairs, but it's doable, if somewhat awkward.I love the automatic room temperature--the fan stays on and the air conditioner turns on only when needed. It has other automated settings I have yet to try but that look helpful.I love the remote! I can adjust it while still lying in bed. Sweet!


Question: What did the reviewer try doing to fix the problems?

I wish I could leave this coffee maker 0 stars... The look of it is great but I was having problems with it within 2 months. The hot plate started going out so my coffee, when poured, wasn't hot. Then the water wouldn't seep in to the pot properly when making it so coffee started tasting horrible. I tried cleaning it numerous times to no avail.It has a lot of great features but whats the point to that unless it works.Steam from making coffee would also leak in to the clock of the coffee maker. I'm an avid coffee drinker and this is the worst one I have ever bought. I don't usually give bad reviews on Amazon, and I buy a lot of stuff here, but thought I had to make people aware of what they will be getting in to if ordering this particular Model. Their is plenty of other Black and Red nice looking coffee makers here on Amazon, or through Google, my advise is to buy one of them.

Answer: cleaning it

I wish I could leave this coffee maker 0 stars... The look of it is great but I was having problems with it within 2 months. The hot plate started going out so my coffee, when poured, wasn't hot. Then the water wouldn't seep in to the pot properly when making it so coffee started tasting horrible. <hl> I tried cleaning it numerous times to no avail. <hl> It has a lot of great features but whats the point to that unless it works. Steam from making coffee would also leak in to the clock of the coffee maker. I'm an avid coffee drinker and this is the worst one I have ever bought. I don't usually give bad reviews on Amazon, and I buy a lot of stuff here, but thought I had to make people aware of what they will be getting in to if ordering this particular Model. Their is plenty of other Black and Red nice looking coffee makers here on Amazon, or through Google, my advise is to buy one of them.

I wish I could leave this coffee maker 0 stars... The look of it is great but I was having problems with it within 2 months. The hot plate started going out so my coffee, when poured, wasn't hot. Then the water wouldn't seep in to the pot properly when making it so coffee started tasting horrible. I tried <hl> cleaning it <hl> numerous times to no avail.It has a lot of great features but whats the point to that unless it works.Steam from making coffee would also leak in to the clock of the coffee maker. I'm an avid coffee drinker and this is the worst one I have ever bought. I don't usually give bad reviews on Amazon, and I buy a lot of stuff here, but thought I had to make people aware of what they will be getting in to if ordering this particular Model. Their is plenty of other Black and Red nice looking coffee makers here on Amazon, or through Google, my advise is to buy one of them.


Question: what happened to the blades on the cutters?

I've used "safety" style can openers for many years and I love the concept. Regular electric can openers seem like an outdated concept to me and I've no idea why people (nor the industry) don't clamor for more of these! I love being able to wash out my cans for recycling without fear of cutting my hands in the process!My last one was a Krups that worked well and lasted a very long time, but all good things must come to an end so when it came time to replace it, I found my only option was a hand-held (which I also have as a back-up) and this Hamilton Beach model. I bought this Hamilton Beach and though I guess I'd have to say it served its purpose in the beginning, it never seemed to work as flawlessly as my old openers.Problems:Occasionally it wouldn't "bite" onto the can, which left me wrestling with the can and the opener to get it to seat properly.Within a matter of months, the cutters went dull (my diagnosis). I found myself having to push up and hold the bottom of the can and let the can spin multiple times while it was cutting, otherwise, the lid would not remove from the can. In the last couple of months, I've had to follow-up with the hand-crank can opener to finish the job.I've been putting up with that for quite awhile and now, it seems that it's given up the ghost for good. Now when it spins, little sharp slivers are left behind: on my counter, on the can opener, on the can, and into my hand (hurting like little splinters) and I suspect they would have gotten into the food too, but... (fortunately in this case) the can never was opened.I've barely had ONE-YEAR of use from this can opener (14-months to be exact). Maybe that's acceptable for some people these days, but not for me. I expect my purchases to last longer.

Answer: went dull

I've used "safety" style can openers for many years and I love the concept. Regular electric can openers seem like an outdated concept to me and I've no idea why people (nor the industry) don't clamor for more of these! I love being able to wash out my cans for recycling without fear of cutting my hands in the process!My last one was a Krups that worked well and lasted a very long time, but all good things must come to an end so when it came time to replace it, I found my only option was a hand-held (which I also have as a back-up) and this Hamilton Beach model. I bought this Hamilton Beach and though I guess I'd have to say it served its purpose in the beginning, it never seemed to work as flawlessly as my old openers. Problems:Occasionally it wouldn't "bite" onto the can, which left me wrestling with the can and the opener to get it to seat properly. <hl> Within a matter of months, the cutters went dull (my diagnosis). <hl> I found myself having to push up and hold the bottom of the can and let the can spin multiple times while it was cutting, otherwise, the lid would not remove from the can. In the last couple of months, I've had to follow-up with the hand-crank can opener to finish the job. I've been putting up with that for quite awhile and now, it seems that it's given up the ghost for good. Now when it spins, little sharp slivers are left behind: on my counter, on the can opener, on the can, and into my hand (hurting like little splinters) and I suspect they would have gotten into the food too, but... (fortunately in this case) the can never was opened. I've barely had ONE-YEAR of use from this can opener (14-months to be exact). Maybe that's acceptable for some people these days, but not for me. I expect my purchases to last longer.

I've used "safety" style can openers for many years and I love the concept. Regular electric can openers seem like an outdated concept to me and I've no idea why people (nor the industry) don't clamor for more of these! I love being able to wash out my cans for recycling without fear of cutting my hands in the process!My last one was a Krups that worked well and lasted a very long time, but all good things must come to an end so when it came time to replace it, I found my only option was a hand-held (which I also have as a back-up) and this Hamilton Beach model. I bought this Hamilton Beach and though I guess I'd have to say it served its purpose in the beginning, it never seemed to work as flawlessly as my old openers.Problems:Occasionally it wouldn't "bite" onto the can, which left me wrestling with the can and the opener to get it to seat properly.Within a matter of months, the cutters <hl> went dull <hl> (my diagnosis). I found myself having to push up and hold the bottom of the can and let the can spin multiple times while it was cutting, otherwise, the lid would not remove from the can. In the last couple of months, I've had to follow-up with the hand-crank can opener to finish the job.I've been putting up with that for quite awhile and now, it seems that it's given up the ghost for good. Now when it spins, little sharp slivers are left behind: on my counter, on the can opener, on the can, and into my hand (hurting like little splinters) and I suspect they would have gotten into the food too, but... (fortunately in this case) the can never was opened.I've barely had ONE-YEAR of use from this can opener (14-months to be exact). Maybe that's acceptable for some people these days, but not for me. I expect my purchases to last longer.


Question: How is the design described?

So far, this is my favorite of every iron I've ever had, and I've been ironing for more than half-a-century. If there's anything to not like about it, I haven't found it yet. I love the longer cord, which is perfect - long enough to make a real difference but not so long it gets in the way. Even though I set up my ironing board against a wall with an outlet, I've always felt like I was straining the cord when using other irons.Other pluses for this iron include how easy it is to fill the water reservoir spill-free, it heats up very quickly and produces lots of steam when I want steam and the heft is just right, not too heavy. I also like the design, which looks and feels well-balanced, and Ultraglide is a fitting name to describe its ease of use with the "slick" soleplate. But I love that cord, my favorite feature.I'm expecting to get a lot of use out of this iron.

Answer: well-balanced

So far, this is my favorite of every iron I've ever had, and I've been ironing for more than half-a-century. If there's anything to not like about it, I haven't found it yet. I love the longer cord, which is perfect - long enough to make a real difference but not so long it gets in the way. Even though I set up my ironing board against a wall with an outlet, I've always felt like I was straining the cord when using other irons. Other pluses for this iron include how easy it is to fill the water reservoir spill-free, it heats up very quickly and produces lots of steam when I want steam and the heft is just right, not too heavy. <hl> I also like the design, which looks and feels well-balanced , and Ultraglide is a fitting name to describe its ease of use with the "slick" soleplate. <hl> But I love that cord, my favorite feature. I'm expecting to get a lot of use out of this iron.

So far, this is my favorite of every iron I've ever had, and I've been ironing for more than half-a-century. If there's anything to not like about it, I haven't found it yet. I love the longer cord, which is perfect - long enough to make a real difference but not so long it gets in the way. Even though I set up my ironing board against a wall with an outlet, I've always felt like I was straining the cord when using other irons.Other pluses for this iron include how easy it is to fill the water reservoir spill-free, it heats up very quickly and produces lots of steam when I want steam and the heft is just right, not too heavy. I also like the design, which looks and feels <hl> well-balanced <hl>, and Ultraglide is a fitting name to describe its ease of use with the "slick" soleplate. But I love that cord, my favorite feature.I'm expecting to get a lot of use out of this iron.

I also like the design, which looks and feels <hl> well-balanced <hl> , and Ultraglide is a fitting name to describe its ease of use with the "slick" soleplate.


Question: Does it fit larger or smaller than the regular matress

The foam came rolled up tightly in a box and upon unrolling it and giving it time to air out (new smell dissipated within 24 hours) and return to its mattress form, it works great for our granddaughters bed. The pad gives her just enough softness. The cover comes in handy and fit just fine. It fits slightly smaller than the bed mattress but, as the instructions that came with the pad say, that allows for a better fit under mattress pads and sheets. Very happy with this product.

Answer: slightly smaller

The foam came rolled up tightly in a box and upon unrolling it and giving it time to air out (new smell dissipated within 24 hours) and return to its mattress form, it works great for our granddaughters bed. The pad gives her just enough softness. The cover comes in handy and fit just fine. <hl> It fits slightly smaller than the bed mattress <hl> but, as the instructions that came with the pad say, that allows for a better fit under mattress pads and sheets. Very happy with this product.

The foam came rolled up tightly in a box and upon unrolling it and giving it time to air out (new smell dissipated within 24 hours) and return to its mattress form, it works great for our granddaughters bed. The pad gives her just enough softness. The cover comes in handy and fit just fine. It fits <hl> slightly smaller <hl> than the bed mattress but, as the instructions that came with the pad say, that allows for a better fit under mattress pads and sheets. Very happy with this product.


Question: Was there a smell with this pillow?

I have been reluctant to try these pillows because other reviewers mention the "crunching" sound they make when you move. It's true they crunch a little when you adjust them, but it didn't take long to get used to it and it doesn't bother me. There was no smell with this pillow, but I did need to remove some of the buckwheat to make it softer and more pliable. It's a pretty firm pillow, but I like that I can adjust it and the shape holds when I build a support for my neck and an indentation for my head. I have tried quite a few pillows due to a very bad neck and back and this one works well for me. Anyone who suffers from neck and back pain knows that each person is different and what works for one person won't necessarily work for someone else, but this pillow is definitely worth a try. It works for me.

Answer: no

I have been reluctant to try these pillows because other reviewers mention the "crunching" sound they make when you move. It's true they crunch a little when you adjust them, but it didn't take long to get used to it and it doesn't bother me. <hl> There was no smell with this pillow, but I did need to remove some of the buckwheat to make it softer and more pliable. <hl> It's a pretty firm pillow, but I like that I can adjust it and the shape holds when I build a support for my neck and an indentation for my head. I have tried quite a few pillows due to a very bad neck and back and this one works well for me. Anyone who suffers from neck and back pain knows that each person is different and what works for one person won't necessarily work for someone else, but this pillow is definitely worth a try. It works for me.

I have been reluctant to try these pillows because other reviewers mention the "crunching" sound they make when you move. It's true they crunch a little when you adjust them, but it didn't take long to get used to it and it doesn't bother me. There was <hl> no <hl> smell with this pillow, but I did need to remove some of the buckwheat to make it softer and more pliable. It's a pretty firm pillow, but I like that I can adjust it and the shape holds when I build a support for my neck and an indentation for my head. I have tried quite a few pillows due to a very bad neck and back and this one works well for me. Anyone who suffers from neck and back pain knows that each person is different and what works for one person won't necessarily work for someone else, but this pillow is definitely worth a try. It works for me.


Question: Why did the consumer only give the chair a 4 star rating instead of a 5 star rating?

My previous desk chair had just about no padding left in the seat (thanks a lot, Skyrim and Red Dead Redemption) so I was excited to try out this mesh back chair.Assembly was very easy and only took about 5-6 minutes using the included allen wrench.After a few days of using the chair extensively I can report that it is extremely comfortable. The seat has great padding and the mesh back is contoured which really helps my lower back. My previous chair had a nearly-straight back and I guess I didn't even realize how uncomfortable it was.The height can be adjusted, from "holy cow, I'm towering over my computer desk" all the way down to "uh, I'm not sure I can get up from down here."I give it 4 stars instead of 5 because it just doesn't have as many options as you might expect to see in a chair in this price range. There is no way to recline, and there are no arms. Neither particularly bothers me, as I primarily use it for PC gaming, but there are a lot of high-quality chairs out there that offer a recline option and arms for around the same price.Overall, this chair is very comfortable and I'd recommended it as long as you understand its limitations.

Answer: it just doesn't have as many options as you might expect to see in a chair in this price range

My previous desk chair had just about no padding left in the seat (thanks a lot, Skyrim and Red Dead Redemption) so I was excited to try out this mesh back chair. Assembly was very easy and only took about 5-6 minutes using the included allen wrench. After a few days of using the chair extensively I can report that it is extremely comfortable. The seat has great padding and the mesh back is contoured which really helps my lower back. My previous chair had a nearly-straight back and I guess I didn't even realize how uncomfortable it was. The height can be adjusted, from "holy cow, I'm towering over my computer desk" all the way down to "uh, I'm not sure I can get up from down here. <hl> "I give it 4 stars instead of 5 because it just doesn't have as many options as you might expect to see in a chair in this price range . <hl> There is no way to recline, and there are no arms. Neither particularly bothers me, as I primarily use it for PC gaming, but there are a lot of high-quality chairs out there that offer a recline option and arms for around the same price. Overall, this chair is very comfortable and I'd recommended it as long as you understand its limitations.

My previous desk chair had just about no padding left in the seat (thanks a lot, Skyrim and Red Dead Redemption) so I was excited to try out this mesh back chair.Assembly was very easy and only took about 5-6 minutes using the included allen wrench.After a few days of using the chair extensively I can report that it is extremely comfortable. The seat has great padding and the mesh back is contoured which really helps my lower back. My previous chair had a nearly-straight back and I guess I didn't even realize how uncomfortable it was.The height can be adjusted, from "holy cow, I'm towering over my computer desk" all the way down to "uh, I'm not sure I can get up from down here."I give it 4 stars instead of 5 because <hl> it just doesn't have as many options as you might expect to see in a chair in this price range <hl>. There is no way to recline, and there are no arms. Neither particularly bothers me, as I primarily use it for PC gaming, but there are a lot of high-quality chairs out there that offer a recline option and arms for around the same price.Overall, this chair is very comfortable and I'd recommended it as long as you understand its limitations.

"I give it 4 stars instead of 5 because <hl> it just doesn't have as many options as you might expect to see in a chair in this price range <hl> .


Question: How often do you have espresso

I carefully read all other reviews on Amazon and everywhere else before purchase. I have had Krups products before and been happier with them than with most of the other brands. I am not in the market for those really expensive Espresso makers but do want my espresso daily. My husband wants his coffee and we are furnishing a small apartment. This looked like the perfect answer. I have only had it one month but so far I am very happy. It makes both good espresso and good coffee and the milk steamer works very well. I saw that many people complained about it but I think they did not read the directions well and practice using it first. It appears that the original steamer design was not good and now Krups has modified and replaced it with a design which does work well.I like cappuccino and I use it by steaming my milk in a large cup first and then making the espresso in another smaller cup and adding it to the cup of milk. This way the cup I drink from is pre-heated and my drink stays hot. If just making espresso then use a small cup and it makes a very nice crema. Enjoy.

Answer: daily

I carefully read all other reviews on Amazon and everywhere else before purchase. I have had Krups products before and been happier with them than with most of the other brands. <hl> I am not in the market for those really expensive Espresso makers but do want my espresso daily . <hl> My husband wants his coffee and we are furnishing a small apartment. This looked like the perfect answer. I have only had it one month but so far I am very happy. It makes both good espresso and good coffee and the milk steamer works very well. I saw that many people complained about it but I think they did not read the directions well and practice using it first. It appears that the original steamer design was not good and now Krups has modified and replaced it with a design which does work well. I like cappuccino and I use it by steaming my milk in a large cup first and then making the espresso in another smaller cup and adding it to the cup of milk. This way the cup I drink from is pre-heated and my drink stays hot. If just making espresso then use a small cup and it makes a very nice crema. Enjoy.

I carefully read all other reviews on Amazon and everywhere else before purchase. I have had Krups products before and been happier with them than with most of the other brands. I am not in the market for those really expensive Espresso makers but do want my espresso <hl> daily <hl>. My husband wants his coffee and we are furnishing a small apartment. This looked like the perfect answer. I have only had it one month but so far I am very happy. It makes both good espresso and good coffee and the milk steamer works very well. I saw that many people complained about it but I think they did not read the directions well and practice using it first. It appears that the original steamer design was not good and now Krups has modified and replaced it with a design which does work well.I like cappuccino and I use it by steaming my milk in a large cup first and then making the espresso in another smaller cup and adding it to the cup of milk. This way the cup I drink from is pre-heated and my drink stays hot. If just making espresso then use a small cup and it makes a very nice crema. Enjoy.

I am not in the market for those really expensive Espresso makers but do want my espresso <hl> daily <hl> .


Question: How long have they had the blender?

We have had this blender for over five years now and it is an absolute workhorse and hands down the best blender for crushing ice. The construction of the blender is quite solid and the motor is powerful enough to handle anything you are looking to blend. The best feature by far: ice crushing. Recommended by Cooks Illustrated for this feature, this blender is incredible at crushing ice to the right consistency for a crushed-ice margarita, which, let's face it, is one of the best reasons to have a blender. Not to mention the fact that it is gorgeous in orange. A best buy for my kitchen for sure.

Answer: powerful enough to handle anything you are looking to blend

We have had this blender for over five years now and it is an absolute workhorse and hands down the best blender for crushing ice. <hl> The construction of the blender is quite solid and the motor is powerful enough to handle anything you are looking to blend . <hl> The best feature by far: ice crushing. Recommended by Cooks Illustrated for this feature, this blender is incredible at crushing ice to the right consistency for a crushed-ice margarita, which, let's face it, is one of the best reasons to have a blender. Not to mention the fact that it is gorgeous in orange. A best buy for my kitchen for sure.

We have had this blender for over five years now and it is an absolute workhorse and hands down the best blender for crushing ice. The construction of the blender is quite solid and the motor is <hl> powerful enough to handle anything you are looking to blend <hl>. The best feature by far: ice crushing. Recommended by Cooks Illustrated for this feature, this blender is incredible at crushing ice to the right consistency for a crushed-ice margarita, which, let's face it, is one of the best reasons to have a blender. Not to mention the fact that it is gorgeous in orange. A best buy for my kitchen for sure.

The construction of the blender is quite solid and the motor is <hl> powerful enough to handle anything you are looking to blend <hl> .


Question: What was synced to?

Bought this to compare to my roomba 560 that I have been using for 3 years. Sent the roomba on a cleaning mission then sent this bad boy out and managed to get stuff the roomba missed. The navigation works great, took about 3 minutes for the mint to sync with the north star navigation unit. Battery life is fantastic!!! It is a great addition to my automated cleaning army!!! Roomba 560-scooba-dirt dog & now the mint;) I can breathe easy in my residence..... No dust bunnies anywhere.You will be happy with your purchase!!!!

Answer: north star navigation unit

Bought this to compare to my roomba 560 that I have been using for 3 years. Sent the roomba on a cleaning mission then sent this bad boy out and managed to get stuff the roomba missed. <hl> The navigation works great, took about 3 minutes for the mint to sync with the north star navigation unit . <hl> Battery life is fantastic!!! It is a great addition to my automated cleaning army!!! Roomba 560-scooba-dirt dog & now the mint;) I can breathe easy in my residence..... No dust bunnies anywhere. You will be happy with your purchase!!!!

Bought this to compare to my roomba 560 that I have been using for 3 years. Sent the roomba on a cleaning mission then sent this bad boy out and managed to get stuff the roomba missed. The navigation works great, took about 3 minutes for the mint to sync with the <hl> north star navigation unit <hl>. Battery life is fantastic!!! It is a great addition to my automated cleaning army!!! Roomba 560-scooba-dirt dog & now the mint;) I can breathe easy in my residence..... No dust bunnies anywhere.You will be happy with your purchase!!!!

The navigation works great, took about 3 minutes for the mint to sync with the <hl> north star navigation unit <hl> .


Question: Is the AC quiet or loud?

Mine also gave me an AC 'tingle' electrical shock or sensation so I returned it after one use. No trouble with Amazon returns. It has a very long AC cord which was handy. Depending how dirty the inside of your PC is..you might want to consider cleaning it with this unit outside. It worked a treat BUT mine had a shock feeling on one of the screw heads when inadvertently touching it..I am sure a 1 in a million factory oversight ..SO I still gave it 5 stars because it is so powerful and did a great cleaning job. It is also so damn noisy I'm not sure if my cat will ever come home. It also gets pretty hot after 10 minutes which honestly is a long time. I would have kept it as I intended to do BUT with the shock tingle I returned it and am waiting for a 2nd one to arrive..I'll update here accordingly. This blower truly does beat cans of air..it blows them away!! <-- get it? Oh well...:)PS- my first desktop PC (years ago) was a Micron brand..I NEVER cleaned it..after 18 months it had a mat of dirt and cat hair on the power supply grill and inside the case like clothes dryer lint filters do...the power supply failed . Now I clean my desktop PC annually...live and learn.

Answer: noisy

Mine also gave me an AC 'tingle' electrical shock or sensation so I returned it after one use. No trouble with Amazon returns. It has a very long AC cord which was handy. Depending how dirty the inside of your PC is..you might want to consider cleaning it with this unit outside. It worked a treat BUT mine had a shock feeling on one of the screw heads when inadvertently touching it.. I am sure a 1 in a million factory oversight .. SO I still gave it 5 stars because it is so powerful and did a great cleaning job. <hl> It is also so damn noisy I'm not sure if my cat will ever come home. <hl> It also gets pretty hot after 10 minutes which honestly is a long time. I would have kept it as I intended to do BUT with the shock tingle I returned it and am waiting for a 2nd one to arrive..I'll update here accordingly. This blower truly does beat cans of air..it blows them away!! <-- get it? Oh well... :)PS- my first desktop PC (years ago) was a Micron brand.. I NEVER cleaned it..after 18 months it had a mat of dirt and cat hair on the power supply grill and inside the case like clothes dryer lint filters do...the power supply failed . Now I clean my desktop PC annually...live and learn.

Mine also gave me an AC 'tingle' electrical shock or sensation so I returned it after one use. No trouble with Amazon returns. It has a very long AC cord which was handy. Depending how dirty the inside of your PC is..you might want to consider cleaning it with this unit outside. It worked a treat BUT mine had a shock feeling on one of the screw heads when inadvertently touching it..I am sure a 1 in a million factory oversight ..SO I still gave it 5 stars because it is so powerful and did a great cleaning job. It is also so damn <hl> noisy <hl> I'm not sure if my cat will ever come home. It also gets pretty hot after 10 minutes which honestly is a long time. I would have kept it as I intended to do BUT with the shock tingle I returned it and am waiting for a 2nd one to arrive..I'll update here accordingly. This blower truly does beat cans of air..it blows them away!! <-- get it? Oh well...:)PS- my first desktop PC (years ago) was a Micron brand..I NEVER cleaned it..after 18 months it had a mat of dirt and cat hair on the power supply grill and inside the case like clothes dryer lint filters do...the power supply failed . Now I clean my desktop PC annually...live and learn.


Question: what material were the measuring cups made of that the writer bought?

I recently bought a plastic set of measuring cups and after taking them out of the dishwasher found that the marked measurements had washed off! The measurements on these cups are on the handle and made of raised plastic so they won't wash off.I love how sturdy they feel and they are just the right weight. Very comfortable to hold.One con is that they do not have any other measurement on them, so the one cup only measures one cup ( I do like cups that include smaller measurements inside)The cups come together on a plastic ring, but are easily detachable. A good buy!

Answer: plastic

<hl> I recently bought a plastic set of measuring cups and after taking them out of the dishwasher found that the marked measurements had washed off! <hl> The measurements on these cups are on the handle and made of raised plastic so they won't wash off. I love how sturdy they feel and they are just the right weight. Very comfortable to hold. One con is that they do not have any other measurement on them, so the one cup only measures one cup ( I do like cups that include smaller measurements inside)The cups come together on a plastic ring, but are easily detachable. A good buy!

I recently bought a <hl> plastic <hl> set of measuring cups and after taking them out of the dishwasher found that the marked measurements had washed off! The measurements on these cups are on the handle and made of raised plastic so they won't wash off.I love how sturdy they feel and they are just the right weight. Very comfortable to hold.One con is that they do not have any other measurement on them, so the one cup only measures one cup ( I do like cups that include smaller measurements inside)The cups come together on a plastic ring, but are easily detachable. A good buy!


Question: is the blender beater a single or double?

Absolutely love it. Researched a dozen mixers, biggest complaint was that slow speeds were too fast. This one is realllllly slooooow and always starts at the lowest speed. Beaters were a bit tricky to learn to insert properly, finally found the knack for it. Having the blender beater (single) means I can mix dough and beat egg whites or cream separately without cleaning anything in between. Feels like a quality piece of equipment, well made. Hoping I won't experience the failures described by others as I only use it once a week.

Answer: single

Absolutely love it. Researched a dozen mixers, biggest complaint was that slow speeds were too fast. This one is realllllly slooooow and always starts at the lowest speed. Beaters were a bit tricky to learn to insert properly, finally found the knack for it. <hl> Having the blender beater ( single ) means I can mix dough and beat egg whites or cream separately without cleaning anything in between. <hl> Feels like a quality piece of equipment, well made. Hoping I won't experience the failures described by others as I only use it once a week.

Absolutely love it. Researched a dozen mixers, biggest complaint was that slow speeds were too fast. This one is realllllly slooooow and always starts at the lowest speed. Beaters were a bit tricky to learn to insert properly, finally found the knack for it. Having the blender beater (<hl> single <hl>) means I can mix dough and beat egg whites or cream separately without cleaning anything in between. Feels like a quality piece of equipment, well made. Hoping I won't experience the failures described by others as I only use it once a week.

Having the blender beater ( <hl> single <hl> ) means I can mix dough and beat egg whites or cream separately without cleaning anything in between.


Question: Is the tea ball durable?

I have been given some loose tea and xlarge tea bags so I bought a tea ball.It worked great.I am sure it will last a long time and I will find other uses for it along with tea making. It locks closed and seems sturdy.

Answer: last a long time

I have been given some loose tea and xlarge tea bags so I bought a tea ball. It worked great. <hl> I am sure it will last a long time and I will find other uses for it along with tea making. <hl> It locks closed and seems sturdy.

I have been given some loose tea and xlarge tea bags so I bought a tea ball.It worked great.I am sure it will <hl> last a long time <hl> and I will find other uses for it along with tea making. It locks closed and seems sturdy.


Question: How many pounds of wheat dough can it hold?

Imagine kneading bread dough to perfection, in as little as 40 seconds! Its how I make FRENCH BREAD. I also make all my dinner rolls and sweet rolls in the Cuisinart (yum)!Easily mix cakes, quick breads, and piecrusts. Effortlessly chop, slice and shred food; you can even grind meat.Touch Pad: I love it's smooth, easy to clean and computerized touch pad.Buttons: (OFF, ON, Pulse and Dough) The dough button kneads bread to perfection in 30-40 seconds. Plus it features a powerful induction motor for HEAVY DOUGH. Note: Still ALWAYS only make 3 lbs. wheat dough (1 large loaf) even in this model. Wheat flour is twice as dense as white!Blades (4 total): This model uses two metal blades; with one for chopping, mixing, kneading dough (also for lighter dough recipes of 3 c or less white flour, particularly small wet sweet doughs). The other metal "dough" blade is for kneading the heavy dough recipes (anything over 4-6 cups of white flour or 3 cups wheat flour). There's also one 4mm slicing blade and a medium shredding blade (it's detachable stem fits either).Locking System: Here's where the PPP shines! :-) The improved lid and feed tube assembly (with it's safety locking system) is much easier to use (at least to figure out).Lid: Each Cuisinart includes a lid and 2 pushers (with a large feed and a smaller inner feed tube).If you want a "top of the line" food processor, for your smallest to larger needs, you won't be disappointed with this model! --Sharon AnneP.S. If you like these tips, you'll love my cooking info website: [...]

Answer: 3 lbs

Note: Still ALWAYS only make 3 lbs .

Imagine kneading bread dough to perfection, in as little as 40 seconds! Its how I make FRENCH BREAD. I also make all my dinner rolls and sweet rolls in the Cuisinart (yum)!Easily mix cakes, quick breads, and piecrusts. Effortlessly chop, slice and shred food; you can even grind meat. Touch Pad: I love it's smooth, easy to clean and computerized touch pad. Buttons: (OFF, ON, Pulse and Dough) The dough button kneads bread to perfection in 30-40 seconds. Plus it features a powerful induction motor for HEAVY DOUGH. <hl> Note: Still ALWAYS only make 3 lbs . <hl> wheat dough (1 large loaf) even in this model. Wheat flour is twice as dense as white!Blades (4 total): This model uses two metal blades; with one for chopping, mixing, kneading dough (also for lighter dough recipes of 3 c or less white flour, particularly small wet sweet doughs). The other metal "dough" blade is for kneading the heavy dough recipes (anything over 4-6 cups of white flour or 3 cups wheat flour). There's also one 4mm slicing blade and a medium shredding blade (it's detachable stem fits either).Locking System: Here's where the PPP shines! :-) The improved lid and feed tube assembly (with it's safety locking system) is much easier to use (at least to figure out).Lid: Each Cuisinart includes a lid and 2 pushers (with a large feed and a smaller inner feed tube).If you want a "top of the line" food processor, for your smallest to larger needs, you won't be disappointed with this model! --Sharon AnneP.S. If you like these tips, you'll love my cooking info website: [...]

Imagine kneading bread dough to perfection, in as little as 40 seconds! Its how I make FRENCH BREAD. I also make all my dinner rolls and sweet rolls in the Cuisinart (yum)!Easily mix cakes, quick breads, and piecrusts. Effortlessly chop, slice and shred food; you can even grind meat.Touch Pad: I love it's smooth, easy to clean and computerized touch pad.Buttons: (OFF, ON, Pulse and Dough) The dough button kneads bread to perfection in 30-40 seconds. Plus it features a powerful induction motor for HEAVY DOUGH. Note: Still ALWAYS only make <hl> 3 lbs <hl>. wheat dough (1 large loaf) even in this model. Wheat flour is twice as dense as white!Blades (4 total): This model uses two metal blades; with one for chopping, mixing, kneading dough (also for lighter dough recipes of 3 c or less white flour, particularly small wet sweet doughs). The other metal "dough" blade is for kneading the heavy dough recipes (anything over 4-6 cups of white flour or 3 cups wheat flour). There's also one 4mm slicing blade and a medium shredding blade (it's detachable stem fits either).Locking System: Here's where the PPP shines! :-) The improved lid and feed tube assembly (with it's safety locking system) is much easier to use (at least to figure out).Lid: Each Cuisinart includes a lid and 2 pushers (with a large feed and a smaller inner feed tube).If you want a "top of the line" food processor, for your smallest to larger needs, you won't be disappointed with this model! --Sharon AnneP.S. If you like these tips, you'll love my cooking info website: [...]

Note: Still ALWAYS only make <hl> 3 lbs <hl> .


Question: How much does a 4 pack of bags cost on Amazon?

Owning a vacuum is like owning a printer -- it's not just the initial cost, it's also the ongoing "surcharge" for use. This Panasonic vacuum (which is excellent, by the way) came with two vacuum bags, but I thought from the quality materials and construction of the bags that it wasn't going to be cheap to keep the house vacuumed. I was pleasantly surprised at how long the bags lasted. Even though they aren't terribly big, they are very sturdy and expand to hold a great deal more dust and dirt that expected. Unlike most canister bags, they aren't made of paper, it is sort of a thick stretchy material. They are very easy to change and don't "leak" dirt and dust all over when you take them out of the canister. At $9.99 a four pack here at Amazon, they are a bargain and should last several months, at least, in the average house.

Answer: 9.99

Owning a vacuum is like owning a printer -- it's not just the initial cost, it's also the ongoing "surcharge" for use. This Panasonic vacuum (which is excellent, by the way) came with two vacuum bags, but I thought from the quality materials and construction of the bags that it wasn't going to be cheap to keep the house vacuumed. I was pleasantly surprised at how long the bags lasted. Even though they aren't terribly big, they are very sturdy and expand to hold a great deal more dust and dirt that expected. Unlike most canister bags, they aren't made of paper, it is sort of a thick stretchy material. They are very easy to change and don't "leak" dirt and dust all over when you take them out of the canister. <hl> At $ 9.99 a four pack here at Amazon, they are a bargain and should last several months, at least, in the average house. <hl>

Owning a vacuum is like owning a printer -- it's not just the initial cost, it's also the ongoing "surcharge" for use. This Panasonic vacuum (which is excellent, by the way) came with two vacuum bags, but I thought from the quality materials and construction of the bags that it wasn't going to be cheap to keep the house vacuumed. I was pleasantly surprised at how long the bags lasted. Even though they aren't terribly big, they are very sturdy and expand to hold a great deal more dust and dirt that expected. Unlike most canister bags, they aren't made of paper, it is sort of a thick stretchy material. They are very easy to change and don't "leak" dirt and dust all over when you take them out of the canister. At $<hl> 9.99 <hl> a four pack here at Amazon, they are a bargain and should last several months, at least, in the average house.

At $ <hl> 9.99 <hl> a four pack here at Amazon, they are a bargain and should last several months, at least, in the average house.


Question: Does the paper towel holder topple over?

If a paper towel holder can thrill a person, this paper towel holder is as exciting as any paper towel holder can be! It looks great and is nicely weighted on the bottom, so when grabbing a paper towel with one hand in the midst of cooking, it doesn't topple over and create a bigger kitchen mess. The bar on the side also assists with one handed paper towel grabbing, but also keeps the roll looking neat and tidy. Add this item to the list of smart looking and fabulously functional simple human tools.

Answer: it doesn't

If a paper towel holder can thrill a person, this paper towel holder is as exciting as any paper towel holder can be! <hl> It looks great and is nicely weighted on the bottom, so when grabbing a paper towel with one hand in the midst of cooking, it doesn't topple over and create a bigger kitchen mess. <hl> The bar on the side also assists with one handed paper towel grabbing, but also keeps the roll looking neat and tidy. Add this item to the list of smart looking and fabulously functional simple human tools.

If a paper towel holder can thrill a person, this paper towel holder is as exciting as any paper towel holder can be! It looks great and is nicely weighted on the bottom, so when grabbing a paper towel with one hand in the midst of cooking, <hl> it doesn't <hl> topple over and create a bigger kitchen mess. The bar on the side also assists with one handed paper towel grabbing, but also keeps the roll looking neat and tidy. Add this item to the list of smart looking and fabulously functional simple human tools.


Question: Who should buy the product according to the reviewer?

I still need a good iron for those last minute wrinkles in formal wear or for a fabric project.This t-fal seems to be sturdy with all the features I want as for adjusting the heat and steam and with the added protection of the nonstick bottom which lets the iron even at its hottest just glide over the fabric (you do need to use only low heat on many synthetics though).It is a good iron for the fabric worker and homemaker and others using materials/fabric, such as cotton, rayon, some silks on low etc. that may sometimes need some heat and pressure.

Answer: .It is a good iron for the fabric worker and homemaker and others using materials/fabric, such as cotton, rayon, some silks on low etc.

I still need a good iron for those last minute wrinkles in formal wear or for a fabric project. <hl> This t-fal seems to be sturdy with all the features I want as for adjusting the heat and steam and with the added protection of the nonstick bottom which lets the iron even at its hottest just glide over the fabric (you do need to use only low heat on many synthetics though) .It is a good iron for the fabric worker and homemaker and others using materials/fabric, such as cotton, rayon, some silks on low etc. that may sometimes need some heat and pressure. <hl>

I still need a good iron for those last minute wrinkles in formal wear or for a fabric project.This t-fal seems to be sturdy with all the features I want as for adjusting the heat and steam and with the added protection of the nonstick bottom which lets the iron even at its hottest just glide over the fabric (you do need to use only low heat on many synthetics though)<hl> .It is a good iron for the fabric worker and homemaker and others using materials/fabric, such as cotton, rayon, some silks on low etc. <hl> that may sometimes need some heat and pressure.

This t-fal seems to be sturdy with all the features I want as for adjusting the heat and steam and with the added protection of the nonstick bottom which lets the iron even at its hottest just glide over the fabric (you do need to use only low heat on many synthetics though) <hl> .It is a good iron for the fabric worker and homemaker and others using materials/fabric, such as cotton, rayon, some silks on low etc. <hl> that may sometimes need some heat and pressure.


Question: What is causing the author's issue?

After all the great reviews I am really disapointed. First, wow, beautiful machine. But, every latte was horribly weak - problem is the steam wand. No matter how long I heated it up, primed it whatever, the steam is just not that strong. When steaming into an empty cup, waited until just steam (no running water), and ended up with 1/4 cup water in the cup! I know $100.00 is not much for a good machine, but I still think that's alot of money and now also a big waste of my time. Returning the machine.

Answer: steam wand

After all the great reviews I am really disapointed. First, wow, beautiful machine. <hl> But, every latte was horribly weak - problem is the steam wand . <hl> No matter how long I heated it up, primed it whatever, the steam is just not that strong. When steaming into an empty cup, waited until just steam (no running water), and ended up with 1/4 cup water in the cup! I know $100.00 is not much for a good machine, but I still think that's alot of money and now also a big waste of my time. Returning the machine.

After all the great reviews I am really disapointed. First, wow, beautiful machine. But, every latte was horribly weak - problem is the <hl> steam wand <hl>. No matter how long I heated it up, primed it whatever, the steam is just not that strong. When steaming into an empty cup, waited until just steam (no running water), and ended up with 1/4 cup water in the cup! I know $100.00 is not much for a good machine, but I still think that's alot of money and now also a big waste of my time. Returning the machine.

But, every latte was horribly weak - problem is the <hl> steam wand <hl> .