Question: Why would sending the product back be a problem?

I've had it for about 2 weeks. It's made terribly. The hose broke free from the end piece on which attachments are placed. I of course had discarded the box by then, so sending it back would be a pain in the ass. Now I have to go out and buy some plastic weld and figure out how to fix it.Don't buy this junk. It just isn't worth it. I wanted a bagged vacuum so as to not have to deal with a dirty container, but I now use my Dyson instead and just clean the dust bin after each use. The difference is like driving a Rolls Royce vs. a Dodge Neon.

Answer: discarded the box

I've had it for about 2 weeks. It's made terribly. The hose broke free from the end piece on which attachments are placed. <hl> I of course had discarded the box by then, so sending it back would be a pain in the ass. <hl> Now I have to go out and buy some plastic weld and figure out how to fix it. Don't buy this junk. It just isn't worth it. I wanted a bagged vacuum so as to not have to deal with a dirty container, but I now use my Dyson instead and just clean the dust bin after each use. The difference is like driving a Rolls Royce vs. a Dodge Neon.

I've had it for about 2 weeks. It's made terribly. The hose broke free from the end piece on which attachments are placed. I of course had <hl> discarded the box <hl> by then, so sending it back would be a pain in the ass. Now I have to go out and buy some plastic weld and figure out how to fix it.Don't buy this junk. It just isn't worth it. I wanted a bagged vacuum so as to not have to deal with a dirty container, but I now use my Dyson instead and just clean the dust bin after each use. The difference is like driving a Rolls Royce vs. a Dodge Neon.


Question: What part of the vacuum might get gunked up with pet hair easily?

At my house we don't have a lot of carpet, but we DO have lots of linoleum and hard pergo, so we were looking for a vacuum we could use to sweep our extensive hard floors. We normally sweep our floors with a broom, but the vacuum is so much more efficient and is lightweight and easy to handle- particularly for seniors. I especially like how well it works in the bathroom. It maneuvers easily around the toilet, and bookcases in my studio and finds dirt, pet hair and dust with ease. I even used it to sweep off the seats of my car to get rid of my Chihuahua's hair.It really works.The only thing I don't like having to do is clean it. And you have to nearly after every job, because it's capacity small and if you have pets, the rollers can get gunked up with hair pretty easily.Overall, this is a big success in my house.

Answer: the rollers

At my house we don't have a lot of carpet, but we DO have lots of linoleum and hard pergo, so we were looking for a vacuum we could use to sweep our extensive hard floors. We normally sweep our floors with a broom, but the vacuum is so much more efficient and is lightweight and easy to handle- particularly for seniors. I especially like how well it works in the bathroom. It maneuvers easily around the toilet, and bookcases in my studio and finds dirt, pet hair and dust with ease. I even used it to sweep off the seats of my car to get rid of my Chihuahua's hair. It really works. The only thing I don't like having to do is clean it. <hl> And you have to nearly after every job, because it's capacity small and if you have pets, the rollers can get gunked up with hair pretty easily. <hl> Overall, this is a big success in my house.

At my house we don't have a lot of carpet, but we DO have lots of linoleum and hard pergo, so we were looking for a vacuum we could use to sweep our extensive hard floors. We normally sweep our floors with a broom, but the vacuum is so much more efficient and is lightweight and easy to handle- particularly for seniors. I especially like how well it works in the bathroom. It maneuvers easily around the toilet, and bookcases in my studio and finds dirt, pet hair and dust with ease. I even used it to sweep off the seats of my car to get rid of my Chihuahua's hair.It really works.The only thing I don't like having to do is clean it. And you have to nearly after every job, because it's capacity small and if you have pets, <hl> the rollers <hl> can get gunked up with hair pretty easily.Overall, this is a big success in my house.


Question: How long does it take to peel a dozen apples with this peeler?

My wife and I pick our own honey crisp apples in the fall and we usually end up with quite a large "reserve", so she'll make pies and apple crisps and other deserts. Rather than try to peel apples by hand like we did in the past, we wanted something to speed up the process. Apple peeling (even with two people) can get pretty tedious if you're not really good at it.This peeler does a great job of that (can go through a dozen Apples in 3 or 4 minutes once you find a setting that works for your most common apple size), but one complaint I have is that it tends to take a lot of the apple with the skin if you're not careful. My wife and I ended up eating a bunch of the ends as we went along because it would shave thick chunks off either end. Not a big deal if you're at home but if you want to use this for a bakery or something it might lead to a fair amount of apple waste if you have a lot of apples that are not "symmetrical" or mostly round.That said it's sturdily built, looks pretty cool (like it belongs in an old-fashioned kitchen), and got through the first 4 dozen or so apples we tested on it without any mechanical problems. We'll see how it stands up to next fall's test / if any of the thiner parts break, etc. Will update if it does. If no update you can assume it's working great a year later.(Note: we have not tried it on potatoes.)

Answer: 3 or 4 minutes

My wife and I pick our own honey crisp apples in the fall and we usually end up with quite a large "reserve", so she'll make pies and apple crisps and other deserts. Rather than try to peel apples by hand like we did in the past, we wanted something to speed up the process. Apple peeling (even with two people) can get pretty tedious if you're not really good at it. <hl> This peeler does a great job of that (can go through a dozen Apples in 3 or 4 minutes once you find a setting that works for your most common apple size), but one complaint I have is that it tends to take a lot of the apple with the skin if you're not careful. <hl> My wife and I ended up eating a bunch of the ends as we went along because it would shave thick chunks off either end. Not a big deal if you're at home but if you want to use this for a bakery or something it might lead to a fair amount of apple waste if you have a lot of apples that are not "symmetrical" or mostly round. That said it's sturdily built, looks pretty cool (like it belongs in an old-fashioned kitchen), and got through the first 4 dozen or so apples we tested on it without any mechanical problems. We'll see how it stands up to next fall's test / if any of the thiner parts break, etc. Will update if it does. If no update you can assume it's working great a year later.(Note: we have not tried it on potatoes.)

My wife and I pick our own honey crisp apples in the fall and we usually end up with quite a large "reserve", so she'll make pies and apple crisps and other deserts. Rather than try to peel apples by hand like we did in the past, we wanted something to speed up the process. Apple peeling (even with two people) can get pretty tedious if you're not really good at it.This peeler does a great job of that (can go through a dozen Apples in <hl> 3 or 4 minutes <hl> once you find a setting that works for your most common apple size), but one complaint I have is that it tends to take a lot of the apple with the skin if you're not careful. My wife and I ended up eating a bunch of the ends as we went along because it would shave thick chunks off either end. Not a big deal if you're at home but if you want to use this for a bakery or something it might lead to a fair amount of apple waste if you have a lot of apples that are not "symmetrical" or mostly round.That said it's sturdily built, looks pretty cool (like it belongs in an old-fashioned kitchen), and got through the first 4 dozen or so apples we tested on it without any mechanical problems. We'll see how it stands up to next fall's test / if any of the thiner parts break, etc. Will update if it does. If no update you can assume it's working great a year later.(Note: we have not tried it on potatoes.)


Question: How does this product differ from regular tongs?

If you've used the longer cooking chopsticks before these have a similar feel. They're metal with a heavy silicon coating. Multi-functional and agile, not clumsy like regular larger tongs. I tend to hold these with a more chopstick-like grip when working with delicate items as it provides more control and precision, such as stuffed mushrooms. These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts, though I have not done a test of this. I find myself using these often for things such as stir-frying, serving noodles, handling scallops, and even chicken nuggets. I recommend these to everyone looking for silicon tongs when precision is important, build and material quality are excellent.I will update when I have used these for heavier items.

Answer: Multi-functional and agile, not clumsy like regular larger tongs.

If you've used the longer cooking chopsticks before these have a similar feel. They're metal with a heavy silicon coating. <hl> Multi-functional and agile, not clumsy like regular larger tongs. I tend to hold these with a more chopstick-like grip when working with delicate items as it provides more control and precision, such as stuffed mushrooms. <hl> These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts, though I have not done a test of this. I find myself using these often for things such as stir-frying, serving noodles, handling scallops, and even chicken nuggets. I recommend these to everyone looking for silicon tongs when precision is important, build and material quality are excellent. I will update when I have used these for heavier items.

If you've used the longer cooking chopsticks before these have a similar feel. They're metal with a heavy silicon coating. <hl> Multi-functional and agile, not clumsy like regular larger tongs. <hl> I tend to hold these with a more chopstick-like grip when working with delicate items as it provides more control and precision, such as stuffed mushrooms. These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts, though I have not done a test of this. I find myself using these often for things such as stir-frying, serving noodles, handling scallops, and even chicken nuggets. I recommend these to everyone looking for silicon tongs when precision is important, build and material quality are excellent.I will update when I have used these for heavier items.


Question: Is the carafe used made of metal?

I drink several cups of coffee per day and have been using a 4 cup Mr. Coffee which performs satisfactorily. This new coffee maker makes a good cup of coffee. If you make a small quantity the coffee is not as hot as many people might prefer. I found that making a half pot or more results in hotter coffee. The coffee maker looks great and I appreciate the simple design that makes it easy to clean the tank, the filter holder and the glass carafe. The grey color looks nice and has a matte finish. Unlike my shiny black Mr. Coffee, this unit does not show finger prints and is easier to wipe clean. Other commentors have covered everything you can say. I have no problem with the carafe but I do remove the coffee filter unit before pouring. To me this is only logical.I paid $59.99 through [...] This site had the lowest price and delivered it in a week or so but were very poor in answering calls or emails. Compared to other small coffee makers this is expensive and has fewer features such as a clock or automatic "turn-on" at a set time. This does not bother me since it only takes about 4 minutes to brew and every other appliance seems to have a clock anyway. When I would set my Mr. Coffee to come on at 6AM it seems I didn't get up until 6:20 and the coffee was already burnt! I stopped using that feature. For me the biggest, though very minor, inconvenience is that you can't pour coffee until the brewing cycle is complete.

Answer: glass carafe

the glass carafe .

I drink several cups of coffee per day and have been using a 4 cup Mr. Coffee which performs satisfactorily. This new coffee maker makes a good cup of coffee. If you make a small quantity the coffee is not as hot as many people might prefer. I found that making a half pot or more results in hotter coffee. The coffee maker looks great and I appreciate the simple design that makes it easy to clean the tank, the filter holder and <hl> the glass carafe . <hl> The grey color looks nice and has a matte finish. Unlike my shiny black Mr. Coffee, this unit does not show finger prints and is easier to wipe clean. Other commentors have covered everything you can say. I have no problem with the carafe but I do remove the coffee filter unit before pouring. To me this is only logical. I paid $59.99 through [...] This site had the lowest price and delivered it in a week or so but were very poor in answering calls or emails. Compared to other small coffee makers this is expensive and has fewer features such as a clock or automatic "turn-on" at a set time. This does not bother me since it only takes about 4 minutes to brew and every other appliance seems to have a clock anyway. When I would set my Mr. Coffee to come on at 6AM it seems I didn't get up until 6:20 and the coffee was already burnt! I stopped using that feature. For me the biggest, though very minor, inconvenience is that you can't pour coffee until the brewing cycle is complete.

I drink several cups of coffee per day and have been using a 4 cup Mr. Coffee which performs satisfactorily. This new coffee maker makes a good cup of coffee. If you make a small quantity the coffee is not as hot as many people might prefer. I found that making a half pot or more results in hotter coffee. The coffee maker looks great and I appreciate the simple design that makes it easy to clean the tank, the filter holder and the <hl> glass carafe <hl>. The grey color looks nice and has a matte finish. Unlike my shiny black Mr. Coffee, this unit does not show finger prints and is easier to wipe clean. Other commentors have covered everything you can say. I have no problem with the carafe but I do remove the coffee filter unit before pouring. To me this is only logical.I paid $59.99 through [...] This site had the lowest price and delivered it in a week or so but were very poor in answering calls or emails. Compared to other small coffee makers this is expensive and has fewer features such as a clock or automatic "turn-on" at a set time. This does not bother me since it only takes about 4 minutes to brew and every other appliance seems to have a clock anyway. When I would set my Mr. Coffee to come on at 6AM it seems I didn't get up until 6:20 and the coffee was already burnt! I stopped using that feature. For me the biggest, though very minor, inconvenience is that you can't pour coffee until the brewing cycle is complete.


Question: Is it attractive?

I got one, and I am glad it was the green (it was the color I was rooting for) My husband became obsessed with black pepper after he met me (I used to coat everything in it) but he uses the crappy pepper that has zero flavor when we go out to eat. So I bought him this (and so I could secretly use it because stale pepper is a pet peeve of mine) Well it's cute, and it works, however it's very difficult to grind the peppercorns and really doesn't put much out. I pretty much have to grind for 5 minutes to get enough to speckle anything. Cute, but I think next time I will spring for the pricier one and hope it works better.

Answer: it's cute

I got one, and I am glad it was the green (it was the color I was rooting for) My husband became obsessed with black pepper after he met me (I used to coat everything in it) but he uses the crappy pepper that has zero flavor when we go out to eat. So I bought him this (and so I could secretly use it because stale pepper is a pet peeve of mine) <hl> Well it's cute , and it works, however it's very difficult to grind the peppercorns and really doesn't put much out. <hl> I pretty much have to grind for 5 minutes to get enough to speckle anything. Cute, but I think next time I will spring for the pricier one and hope it works better.

I got one, and I am glad it was the green (it was the color I was rooting for) My husband became obsessed with black pepper after he met me (I used to coat everything in it) but he uses the crappy pepper that has zero flavor when we go out to eat. So I bought him this (and so I could secretly use it because stale pepper is a pet peeve of mine) Well <hl> it's cute <hl>, and it works, however it's very difficult to grind the peppercorns and really doesn't put much out. I pretty much have to grind for 5 minutes to get enough to speckle anything. Cute, but I think next time I will spring for the pricier one and hope it works better.

Well <hl> it's cute <hl> , and it works, however it's very difficult to grind the peppercorns and really doesn't put much out.


Question: why does water get into the press?

The press itself is perfect for garlic. The only problem is that the handles become lose and water gets in. It has become a pain to clean being that I have to remember to take it apart when it goes in the dishwasher if I want a sanitary clean press to come out. And when I do forget I usually get water leaking as a I go to put it away, and it's not clean inside because it is lose enough for water to gather in while in the washer, and needs to be cleaned again. I did a lot of research before purchasing this press and given the ratings took the chance. You can't really predict something like this will happen and its more of a nuisance than anything. I really love OXO products and hope they can fix this problem.

Answer: the handles become lose

The press itself is perfect for garlic. <hl> The only problem is that the handles become lose and water gets in. <hl> It has become a pain to clean being that I have to remember to take it apart when it goes in the dishwasher if I want a sanitary clean press to come out. And when I do forget I usually get water leaking as a I go to put it away, and it's not clean inside because it is lose enough for water to gather in while in the washer, and needs to be cleaned again. I did a lot of research before purchasing this press and given the ratings took the chance. You can't really predict something like this will happen and its more of a nuisance than anything. I really love OXO products and hope they can fix this problem.

The press itself is perfect for garlic. The only problem is that <hl> the handles become lose <hl> and water gets in. It has become a pain to clean being that I have to remember to take it apart when it goes in the dishwasher if I want a sanitary clean press to come out. And when I do forget I usually get water leaking as a I go to put it away, and it's not clean inside because it is lose enough for water to gather in while in the washer, and needs to be cleaned again. I did a lot of research before purchasing this press and given the ratings took the chance. You can't really predict something like this will happen and its more of a nuisance than anything. I really love OXO products and hope they can fix this problem.


Question: The stream press made the shirts look like they came from where?

I hate ironing and experimented between this steam press and theDeLonghi steam generatorto find an iron that might actually make it easier, faster, or less tedious. Alas, I have not yet hit the lottery. While the steam press did leave my husband's shirts incredibly crisp and looking almost like they were done by the dry cleaner's (there was also a slight crease on one side of the collar, created when I rotated one pressed side of the shirt so that I could press the other side), it did not save me enough time to be worth the effort. It took so much time to perfectly arrange the shirts on the board and spray down any deep creases with a spritzing bottle (not to even mention the fact that I would burn my knuckles putting my hand in there to re-arrange the shirt), it ended up taking only slightly less time to iron the same number of dress shirts as if I were using a regular iron. It was pretty cool though, that the ironing part was a simple push of the press, a count to 3, and voila! Ironed clothes! This thing is also a dream for ironing linen napkins, tablecloths, and flat sheets.If you're a perfectionist about your dress shirts, but don't have the time, money or desire to take things to the dry cleaners, this might be the product for you. But if you need to press large amounts of items, if you need to iron a variety of different types of garments (i.e. women's clothing or items with intricate designs), then you might be better off getting a steam generator.If you found this review helpful, please let me know!

Answer: dry cleaner's

I hate ironing and experimented between this steam press and theDeLonghi steam generatorto find an iron that might actually make it easier, faster, or less tedious. Alas, I have not yet hit the lottery. <hl> While the steam press did leave my husband's shirts incredibly crisp and looking almost like they were done by the dry cleaner's (there was also a slight crease on one side of the collar, created when I rotated one pressed side of the shirt so that I could press the other side), it did not save me enough time to be worth the effort. <hl> It took so much time to perfectly arrange the shirts on the board and spray down any deep creases with a spritzing bottle (not to even mention the fact that I would burn my knuckles putting my hand in there to re-arrange the shirt), it ended up taking only slightly less time to iron the same number of dress shirts as if I were using a regular iron. It was pretty cool though, that the ironing part was a simple push of the press, a count to 3, and voila! Ironed clothes! This thing is also a dream for ironing linen napkins, tablecloths, and flat sheets. If you're a perfectionist about your dress shirts, but don't have the time, money or desire to take things to the dry cleaners, this might be the product for you. But if you need to press large amounts of items, if you need to iron a variety of different types of garments (i.e. women's clothing or items with intricate designs), then you might be better off getting a steam generator. If you found this review helpful, please let me know!

I hate ironing and experimented between this steam press and theDeLonghi steam generatorto find an iron that might actually make it easier, faster, or less tedious. Alas, I have not yet hit the lottery. While the steam press did leave my husband's shirts incredibly crisp and looking almost like they were done by the <hl> dry cleaner's <hl> (there was also a slight crease on one side of the collar, created when I rotated one pressed side of the shirt so that I could press the other side), it did not save me enough time to be worth the effort. It took so much time to perfectly arrange the shirts on the board and spray down any deep creases with a spritzing bottle (not to even mention the fact that I would burn my knuckles putting my hand in there to re-arrange the shirt), it ended up taking only slightly less time to iron the same number of dress shirts as if I were using a regular iron. It was pretty cool though, that the ironing part was a simple push of the press, a count to 3, and voila! Ironed clothes! This thing is also a dream for ironing linen napkins, tablecloths, and flat sheets.If you're a perfectionist about your dress shirts, but don't have the time, money or desire to take things to the dry cleaners, this might be the product for you. But if you need to press large amounts of items, if you need to iron a variety of different types of garments (i.e. women's clothing or items with intricate designs), then you might be better off getting a steam generator.If you found this review helpful, please let me know!


Question: What problem does the Bodum Bistro Large Electric Water Kettle have?

I absolutely adored the Bodum Bistro Large Electric Water Kettle! It was the perfect addition to my classroom, especially with winter coming on. However, there is just a slight problem. If not watched closely, the pot tends to get overheated and smells like it is going to melt. Which in turn, makes it unsafe to use.The water boiled quickly and efficiently. My only problem was the fact that this product gets so hot that I am afraid of it melting or burning something down.The company in my opinion needs to safety test this product a bit more closely.Natalie S. for Amazon Vine

Answer: tends to get overheated and smells like it is going to melt

I absolutely adored the Bodum Bistro Large Electric Water Kettle! It was the perfect addition to my classroom, especially with winter coming on. However, there is just a slight problem. <hl> If not watched closely, the pot tends to get overheated and smells like it is going to melt . <hl> Which in turn, makes it unsafe to use. The water boiled quickly and efficiently. My only problem was the fact that this product gets so hot that I am afraid of it melting or burning something down. The company in my opinion needs to safety test this product a bit more closely. Natalie S. for Amazon Vine

I absolutely adored the Bodum Bistro Large Electric Water Kettle! It was the perfect addition to my classroom, especially with winter coming on. However, there is just a slight problem. If not watched closely, the pot <hl> tends to get overheated and smells like it is going to melt <hl>. Which in turn, makes it unsafe to use.The water boiled quickly and efficiently. My only problem was the fact that this product gets so hot that I am afraid of it melting or burning something down.The company in my opinion needs to safety test this product a bit more closely.Natalie S. for Amazon Vine

If not watched closely, the pot <hl> tends to get overheated and smells like it is going to melt <hl> .


Question: What kind of briquettes should you use?

with 3-4 folks camping, i struggled with 4qt vs 6qt. The 6qt 12in is pretty heavy but is perfect size for our campouts. The 4qt/10in would have been too small. The instruction book and recipe book were excellent in getting us started. The lid that holds charcoals is a must since most recipes call for coals to be on the top and the rim around the lid ensures easy placement. One thing they do to help you get consistent results is to use regular charcoal briquettes, this made our first few tries successful. Lodge Logic quality speaks for itself.

Answer: regular charcoal

with 3-4 folks camping, i struggled with 4qt vs 6qt. The 6qt 12in is pretty heavy but is perfect size for our campouts. The 4qt/10in would have been too small. The instruction book and recipe book were excellent in getting us started. The lid that holds charcoals is a must since most recipes call for coals to be on the top and the rim around the lid ensures easy placement. <hl> One thing they do to help you get consistent results is to use regular charcoal briquettes, this made our first few tries successful. <hl> Lodge Logic quality speaks for itself.

with 3-4 folks camping, i struggled with 4qt vs 6qt. The 6qt 12in is pretty heavy but is perfect size for our campouts. The 4qt/10in would have been too small. The instruction book and recipe book were excellent in getting us started. The lid that holds charcoals is a must since most recipes call for coals to be on the top and the rim around the lid ensures easy placement. One thing they do to help you get consistent results is to use <hl> regular charcoal <hl> briquettes, this made our first few tries successful. Lodge Logic quality speaks for itself.


Question: Which product is not sturdy and won't support much weight?

GOOD FEATURES:1. Looks niceBAD FEATURES:1. Not sturdy2. Poorer quality than the Tablemate I bought a few years back.The one I bought a few years back was called the same thing, but the metal legs were much stronger and of a heavier metal. I use that one all the time to eat, rest my elbows on when watching TV, or to sort things. It can support a lot of weight. The newer one is not sturdy at all and I wouldn't trust putting hardly any weight on it. Very inferior.

Answer: The newer one

GOOD FEATURES:1. Looks niceBAD FEATURES:1. Not sturdy2. Poorer quality than the Tablemate I bought a few years back. The one I bought a few years back was called the same thing, but the metal legs were much stronger and of a heavier metal. I use that one all the time to eat, rest my elbows on when watching TV, or to sort things. It can support a lot of weight. <hl> The newer one is not sturdy at all and I wouldn't trust putting hardly any weight on it. <hl> Very inferior.

GOOD FEATURES:1. Looks niceBAD FEATURES:1. Not sturdy2. Poorer quality than the Tablemate I bought a few years back.The one I bought a few years back was called the same thing, but the metal legs were much stronger and of a heavier metal. I use that one all the time to eat, rest my elbows on when watching TV, or to sort things. It can support a lot of weight. <hl> The newer one <hl> is not sturdy at all and I wouldn't trust putting hardly any weight on it. Very inferior.


Question: what is the noise level of the fan?

I called Honeywell to get clarification on their fans and was forwarded to the actual company who makes the fans. Nevertheless, the fan is rather loud and doesn't pack much punch. It's okay for a small room.

Answer: loud

I called Honeywell to get clarification on their fans and was forwarded to the actual company who makes the fans. <hl> Nevertheless, the fan is rather loud and doesn't pack much punch. <hl> It's okay for a small room.

I called Honeywell to get clarification on their fans and was forwarded to the actual company who makes the fans. Nevertheless, the fan is rather <hl> loud <hl> and doesn't pack much punch. It's okay for a small room.


Question: Where does the author suggest decoration is needed?

I have other Butterfly Meadow items (bowls of different sizes), and they seem to be thinner, more delicate and more elegant than this dish. I will keep this dish though it seems heavier because it's still nice, and I'm sure it will be useful -- but it is not as dainty as the bowls, and it's a disappointment.The other complaint I have is the same as I have with Butterfly Meadow plates (which is why I'm not buying them) -- the pretty pictures of flowers and butterflies are in the middle (in the bottom) so they get covered by food. It makes no sense. The designer wasn't thinking straight. For this dish to be truly beautiful, some ornamentation on the inside of the rim i s needed, so it would be visible when the dish is being used (there is some ornamentation on the outside of the rim, but you can hardly see it when the plate sits on the table).

Answer: inside of the rim

I have other Butterfly Meadow items (bowls of different sizes), and they seem to be thinner, more delicate and more elegant than this dish. I will keep this dish though it seems heavier because it's still nice, and I'm sure it will be useful -- but it is not as dainty as the bowls, and it's a disappointment. The other complaint I have is the same as I have with Butterfly Meadow plates (which is why I'm not buying them) -- the pretty pictures of flowers and butterflies are in the middle (in the bottom) so they get covered by food. It makes no sense. The designer wasn't thinking straight. <hl> For this dish to be truly beautiful, some ornamentation on the inside of the rim i s needed, so it would be visible when the dish is being used (there is some ornamentation on the outside of the rim, but you can hardly see it when the plate sits on the table). <hl>

I have other Butterfly Meadow items (bowls of different sizes), and they seem to be thinner, more delicate and more elegant than this dish. I will keep this dish though it seems heavier because it's still nice, and I'm sure it will be useful -- but it is not as dainty as the bowls, and it's a disappointment.The other complaint I have is the same as I have with Butterfly Meadow plates (which is why I'm not buying them) -- the pretty pictures of flowers and butterflies are in the middle (in the bottom) so they get covered by food. It makes no sense. The designer wasn't thinking straight. For this dish to be truly beautiful, some ornamentation on the <hl> inside of the rim <hl> i s needed, so it would be visible when the dish is being used (there is some ornamentation on the outside of the rim, but you can hardly see it when the plate sits on the table).


Question: What kind of moka pots did they once own?

I've owned two other bialetti moka pots in the past. I still have one actually, but it's a larger (stainless steel) variant. Making coffee in the office, many times I'll want to just make coffee for myself instead of the two cups that the larger model would produce. Sometimes a coworker would take the spare cup of coffee, but often it would go cold sitting there as not everyone can handle such an amazing cup of coffee.This thing is perfect for one american sized cup of coffee with creamer. I use this thing in conjunction with a hot plate in the office. Who needs K-cups?

Answer: bialetti

<hl> I've owned two other bialetti moka pots in the past. <hl> I still have one actually, but it's a larger (stainless steel) variant. Making coffee in the office, many times I'll want to just make coffee for myself instead of the two cups that the larger model would produce. Sometimes a coworker would take the spare cup of coffee, but often it would go cold sitting there as not everyone can handle such an amazing cup of coffee. This thing is perfect for one american sized cup of coffee with creamer. I use this thing in conjunction with a hot plate in the office. Who needs K-cups?

I've owned two other <hl> bialetti <hl> moka pots in the past. I still have one actually, but it's a larger (stainless steel) variant. Making coffee in the office, many times I'll want to just make coffee for myself instead of the two cups that the larger model would produce. Sometimes a coworker would take the spare cup of coffee, but often it would go cold sitting there as not everyone can handle such an amazing cup of coffee.This thing is perfect for one american sized cup of coffee with creamer. I use this thing in conjunction with a hot plate in the office. Who needs K-cups?


Question: Why does the writer love silicone pans for baking?

I have never baked with Silicone before, and was curious to see how well it does.I made cupcakes in my Freshware pan. When you place it in the oven you need to put it on a flat baking sheet or pan.My cupcakes cooked evenly and were super easy to pop out by using my fingers to push the bottom of each muffin cup. So much easier than trying to bang them out by turning the pan upside, which is what I have to do with my metal muffin pan.Clean up was super quick and easy. I am now going to start buying silicone pans for all of my baking. Much easier to use, and my baked goods will stay in one piece (no struggling to get them out of their pan)

Answer: Much easier to use, and my baked goods will stay in one piece

I have never baked with Silicone before, and was curious to see how well it does. I made cupcakes in my Freshware pan. When you place it in the oven you need to put it on a flat baking sheet or pan. My cupcakes cooked evenly and were super easy to pop out by using my fingers to push the bottom of each muffin cup. So much easier than trying to bang them out by turning the pan upside, which is what I have to do with my metal muffin pan. Clean up was super quick and easy. I am now going to start buying silicone pans for all of my baking. <hl> Much easier to use, and my baked goods will stay in one piece (no struggling to get them out of their pan) <hl>

I have never baked with Silicone before, and was curious to see how well it does.I made cupcakes in my Freshware pan. When you place it in the oven you need to put it on a flat baking sheet or pan.My cupcakes cooked evenly and were super easy to pop out by using my fingers to push the bottom of each muffin cup. So much easier than trying to bang them out by turning the pan upside, which is what I have to do with my metal muffin pan.Clean up was super quick and easy. I am now going to start buying silicone pans for all of my baking. <hl> Much easier to use, and my baked goods will stay in one piece <hl> (no struggling to get them out of their pan)


Question: is the whisk well made?

I rarely use a whisk (mostly when I am preparing a béchamel sauce), but I invest in quality kitchen tools and this is just that.The construction is exceptional. This is not some cheap whisk that has a loop at the end holding the wires together - its floating wires are the key to whipping sauces, eggs and other related food preparation tasks.Wires are medium gauge: not too stiff nor too flexible. This feature is important to me because I use basic tools instead of specialized ones. Some friends have four or five different types of whisks - I make do with this one and it does everything I need from a whisk.The 10" size has worked for every food preparation task - large or small - for which I've used it. If you are going to own just one whisk this is a good size for multi-purpose use.What I most love is the handle. It is as though it was designed perfectly for my hand because the diameter reduces fatigue when you are using it briskly over a medium heat and cannot stop or risk ruining a sauce.Cleaning it is also easy because of the wire design. I place mine in a dish rack after cleaning and allow it to air dry after a few towel wipes.I view mine as an investment in both quality and function.

Answer: construction is exceptional

The construction is exceptional .

I rarely use a whisk (mostly when I am preparing a béchamel sauce), but I invest in quality kitchen tools and this is just that. <hl> The construction is exceptional . <hl> This is not some cheap whisk that has a loop at the end holding the wires together - its floating wires are the key to whipping sauces, eggs and other related food preparation tasks. Wires are medium gauge: not too stiff nor too flexible. This feature is important to me because I use basic tools instead of specialized ones. Some friends have four or five different types of whisks - I make do with this one and it does everything I need from a whisk. The 10" size has worked for every food preparation task - large or small - for which I've used it. If you are going to own just one whisk this is a good size for multi-purpose use. What I most love is the handle. It is as though it was designed perfectly for my hand because the diameter reduces fatigue when you are using it briskly over a medium heat and cannot stop or risk ruining a sauce. Cleaning it is also easy because of the wire design. I place mine in a dish rack after cleaning and allow it to air dry after a few towel wipes. I view mine as an investment in both quality and function.

I rarely use a whisk (mostly when I am preparing a béchamel sauce), but I invest in quality kitchen tools and this is just that.The <hl> construction is exceptional <hl>. This is not some cheap whisk that has a loop at the end holding the wires together - its floating wires are the key to whipping sauces, eggs and other related food preparation tasks.Wires are medium gauge: not too stiff nor too flexible. This feature is important to me because I use basic tools instead of specialized ones. Some friends have four or five different types of whisks - I make do with this one and it does everything I need from a whisk.The 10" size has worked for every food preparation task - large or small - for which I've used it. If you are going to own just one whisk this is a good size for multi-purpose use.What I most love is the handle. It is as though it was designed perfectly for my hand because the diameter reduces fatigue when you are using it briskly over a medium heat and cannot stop or risk ruining a sauce.Cleaning it is also easy because of the wire design. I place mine in a dish rack after cleaning and allow it to air dry after a few towel wipes.I view mine as an investment in both quality and function.

The <hl> construction is exceptional <hl> .


Question: How many moka pots did they own in the past?

Answer: two

<hl> I've owned two other bialetti moka pots in the past. <hl> I still have one actually, but it's a larger (stainless steel) variant. Making coffee in the office, many times I'll want to just make coffee for myself instead of the two cups that the larger model would produce. Sometimes a coworker would take the spare cup of coffee, but often it would go cold sitting there as not everyone can handle such an amazing cup of coffee. This thing is perfect for one american sized cup of coffee with creamer. I use this thing in conjunction with a hot plate in the office. Who needs K-cups?

I've owned <hl> two <hl> other bialetti moka pots in the past. I still have one actually, but it's a larger (stainless steel) variant. Making coffee in the office, many times I'll want to just make coffee for myself instead of the two cups that the larger model would produce. Sometimes a coworker would take the spare cup of coffee, but often it would go cold sitting there as not everyone can handle such an amazing cup of coffee.This thing is perfect for one american sized cup of coffee with creamer. I use this thing in conjunction with a hot plate in the office. Who needs K-cups?


Question: Is it a bad comforter?

When I first received this, I was very disappointed. It looked like water stains all over the spread. It did not look like a design.I could not figure out if this was suppose to look like this or not. So I contacted customer service and they didn't know either.They were gracious enough to reissue a new one and I sent the other back. I can now say that the new one is no better.It isn't a bad comforter for the price but know that when on the bed, it gives a faded, very used look. This is the style I now assume. It is made to look that way. So if you like the worn out in spots, faded look, this is the quilt for you, like a nice pair of worn out jeans. I think the first one was worse and I'm keeping this one. My living room is dark and it will work. But don't expect it to be a uniformed color like it shows in the picture. The backside is, but the front isn't.

Answer: It isn't a bad comforter for the price

When I first received this, I was very disappointed. It looked like water stains all over the spread. It did not look like a design. I could not figure out if this was suppose to look like this or not. So I contacted customer service and they didn't know either. They were gracious enough to reissue a new one and I sent the other back. I can now say that the new one is no better. <hl> It isn't a bad comforter for the price but know that when on the bed, it gives a faded, very used look. <hl> This is the style I now assume. It is made to look that way. So if you like the worn out in spots, faded look, this is the quilt for you, like a nice pair of worn out jeans. I think the first one was worse and I'm keeping this one. My living room is dark and it will work. But don't expect it to be a uniformed color like it shows in the picture. The backside is, but the front isn't.

When I first received this, I was very disappointed. It looked like water stains all over the spread. It did not look like a design.I could not figure out if this was suppose to look like this or not. So I contacted customer service and they didn't know either.They were gracious enough to reissue a new one and I sent the other back. I can now say that the new one is no better.<hl> It isn't a bad comforter for the price <hl> but know that when on the bed, it gives a faded, very used look. This is the style I now assume. It is made to look that way. So if you like the worn out in spots, faded look, this is the quilt for you, like a nice pair of worn out jeans. I think the first one was worse and I'm keeping this one. My living room is dark and it will work. But don't expect it to be a uniformed color like it shows in the picture. The backside is, but the front isn't.


Question: What kind of blend does reviewer use the product for?

Don't waste your money. Use recycled lids from store-bought mayo or salad dressing. They leak less than these and are free. If you want a water-tight seal, use a regular two-piece canning lid because these leak like a sieve; if the two-piece feature really bugs you, hot-glue the flat to the ring. I will grant that these are pretty and white and don't have a food name embossed on them. But they are for storing stuff, so who is really going to see it? I bought the box over a year ago and only two lids have been put into use - for jars of my special lotion blend. I use recycled lids or canning lids for everything else.

Answer: lotion

Don't waste your money. Use recycled lids from store-bought mayo or salad dressing. They leak less than these and are free. If you want a water-tight seal, use a regular two-piece canning lid because these leak like a sieve; if the two-piece feature really bugs you, hot-glue the flat to the ring. I will grant that these are pretty and white and don't have a food name embossed on them. But they are for storing stuff, so who is really going to see it? <hl> I bought the box over a year ago and only two lids have been put into use - for jars of my special lotion blend. <hl> I use recycled lids or canning lids for everything else.

Don't waste your money. Use recycled lids from store-bought mayo or salad dressing. They leak less than these and are free. If you want a water-tight seal, use a regular two-piece canning lid because these leak like a sieve; if the two-piece feature really bugs you, hot-glue the flat to the ring. I will grant that these are pretty and white and don't have a food name embossed on them. But they are for storing stuff, so who is really going to see it? I bought the box over a year ago and only two lids have been put into use - for jars of my special <hl> lotion <hl> blend. I use recycled lids or canning lids for everything else.


Question: where did the model the writer bought go after months of bickering?

My experience with Bissell's spot cleaners has been horrible. The model I bought six months ago just went out to the trash after months of "bickering with Bickell." I think it worked three times and Bickell's customer service people managed to talk me out of returning it until the return date had passed. I decided to check and see if there are similar products made by other carpet cleaning companies. Bissell is the only company that makes these, which makes me wonder why Eureka, Hoover, and other good companies don't have something even close to offer in the spot cleaning robot machine category. I have to think the technology has not been perfected enough for reputable companies to take a chance on it. I have a Dyson carpet cleaner I love, but was expensive. I wanted something simple to take care of spills. But don't waste your money on Bissell.

Answer: trash

My experience with Bissell's spot cleaners has been horrible. <hl> The model I bought six months ago just went out to the trash after months of "bickering with Bickell." I think it worked three times and Bickell's customer service people managed to talk me out of returning it until the return date had passed. <hl> I decided to check and see if there are similar products made by other carpet cleaning companies. Bissell is the only company that makes these, which makes me wonder why Eureka, Hoover, and other good companies don't have something even close to offer in the spot cleaning robot machine category. I have to think the technology has not been perfected enough for reputable companies to take a chance on it. I have a Dyson carpet cleaner I love, but was expensive. I wanted something simple to take care of spills. But don't waste your money on Bissell.

My experience with Bissell's spot cleaners has been horrible. The model I bought six months ago just went out to the <hl> trash <hl> after months of "bickering with Bickell." I think it worked three times and Bickell's customer service people managed to talk me out of returning it until the return date had passed. I decided to check and see if there are similar products made by other carpet cleaning companies. Bissell is the only company that makes these, which makes me wonder why Eureka, Hoover, and other good companies don't have something even close to offer in the spot cleaning robot machine category. I have to think the technology has not been perfected enough for reputable companies to take a chance on it. I have a Dyson carpet cleaner I love, but was expensive. I wanted something simple to take care of spills. But don't waste your money on Bissell.


Question: When did this person buy the product?

Got these 18 months ago for a kitchen remodel, loved the look and price. Long story short, they are not super supportive and don't feel very sturdy. If you're in the 190-200# range, they will not stay up at the selected height and will eventually sink down to the bottom position.I don't feel comfortable sitting in them and do not feel they support me well or safely. Too bad, they look nice, now they are just ornamentation for the kitchen bar. They may be cheap, but in this case you get what you pay for. Not recommended, unless you weigh less than 120# and don't mind no back support.

Answer: 18 months ago

<hl> Got these 18 months ago for a kitchen remodel, loved the look and price. <hl> Long story short, they are not super supportive and don't feel very sturdy. If you're in the 190-200# range, they will not stay up at the selected height and will eventually sink down to the bottom position. I don't feel comfortable sitting in them and do not feel they support me well or safely. Too bad, they look nice, now they are just ornamentation for the kitchen bar. They may be cheap, but in this case you get what you pay for. Not recommended, unless you weigh less than 120# and don't mind no back support.

Got these <hl> 18 months ago <hl> for a kitchen remodel, loved the look and price. Long story short, they are not super supportive and don't feel very sturdy. If you're in the 190-200# range, they will not stay up at the selected height and will eventually sink down to the bottom position.I don't feel comfortable sitting in them and do not feel they support me well or safely. Too bad, they look nice, now they are just ornamentation for the kitchen bar. They may be cheap, but in this case you get what you pay for. Not recommended, unless you weigh less than 120# and don't mind no back support.


Question: Will the kettle be useable for many years?

I needed a one-person, smaller tea kettle but did not want a cheap metal kettle that would look dented or tacky within a month. Nor did I want to drink water boiled in aluminum. I also didn't want to spend $80 or more for a better quality kettle. Though I love both glass and ceramic, it's too easy to break with regular daily use.This little kettle is tiny, so it heats up to a boil at a rapid pace. You'll have a cup of hot tea in minutes. Perfect.No it's not thick, but it is stainless and it's easy to clean. Pop it into dishwasher and it looks new again.Yes, it does whistle, but in proportion to its size. It's NOT loud. That is my major caution.If you tend to wander away to the other side of the house and forget the kettle is on the stove, you likely won't hear this little fellow whistling and should buy a bigger, louder teakettle.If your needs are similar to mine, you'll think it's perfect. Will it last for ten years? Probably but the plastic parts might not. And the price is beyond reasonable.

Answer: Probably but the plastic parts might not.

I needed a one-person, smaller tea kettle but did not want a cheap metal kettle that would look dented or tacky within a month. Nor did I want to drink water boiled in aluminum. I also didn't want to spend $80 or more for a better quality kettle. Though I love both glass and ceramic, it's too easy to break with regular daily use. This little kettle is tiny, so it heats up to a boil at a rapid pace. You'll have a cup of hot tea in minutes. Perfect. No it's not thick, but it is stainless and it's easy to clean. Pop it into dishwasher and it looks new again. Yes, it does whistle, but in proportion to its size. It's NOT loud. That is my major caution. If you tend to wander away to the other side of the house and forget the kettle is on the stove, you likely won't hear this little fellow whistling and should buy a bigger, louder teakettle. If your needs are similar to mine, you'll think it's perfect. <hl> Will it last for ten years? Probably but the plastic parts might not. And the price is beyond reasonable. <hl>

I needed a one-person, smaller tea kettle but did not want a cheap metal kettle that would look dented or tacky within a month. Nor did I want to drink water boiled in aluminum. I also didn't want to spend $80 or more for a better quality kettle. Though I love both glass and ceramic, it's too easy to break with regular daily use.This little kettle is tiny, so it heats up to a boil at a rapid pace. You'll have a cup of hot tea in minutes. Perfect.No it's not thick, but it is stainless and it's easy to clean. Pop it into dishwasher and it looks new again.Yes, it does whistle, but in proportion to its size. It's NOT loud. That is my major caution.If you tend to wander away to the other side of the house and forget the kettle is on the stove, you likely won't hear this little fellow whistling and should buy a bigger, louder teakettle.If your needs are similar to mine, you'll think it's perfect. Will it last for ten years? <hl> Probably but the plastic parts might not. <hl> And the price is beyond reasonable.


Question: What does it need to be stored in?

I bought 2 CAI Tylose Powder a few months ago. I use it to harden fondant and gumpaste, it works great. For fondant i add a really small amount to the fondant i wish to use to make decorations. It will harden the fondant eventually. For gumpaste, a lot of it is needed, and it's actually added to the recipe. Once the gumpaste is made, it has to be stored in an air sealed bag. Otherwise it will harden really quick. This product is a bit pricy but it works. I recommend buying more than one at a time to save on shipping.

Answer: has to be stored in an air sealed bag

I bought 2 CAI Tylose Powder a few months ago. I use it to harden fondant and gumpaste, it works great. For fondant i add a really small amount to the fondant i wish to use to make decorations. It will harden the fondant eventually. For gumpaste, a lot of it is needed, and it's actually added to the recipe. <hl> Once the gumpaste is made, it has to be stored in an air sealed bag . <hl> Otherwise it will harden really quick. This product is a bit pricy but it works. I recommend buying more than one at a time to save on shipping.

I bought 2 CAI Tylose Powder a few months ago. I use it to harden fondant and gumpaste, it works great. For fondant i add a really small amount to the fondant i wish to use to make decorations. It will harden the fondant eventually. For gumpaste, a lot of it is needed, and it's actually added to the recipe. Once the gumpaste is made, it <hl> has to be stored in an air sealed bag <hl>. Otherwise it will harden really quick. This product is a bit pricy but it works. I recommend buying more than one at a time to save on shipping.

Once the gumpaste is made, it <hl> has to be stored in an air sealed bag <hl> .


Question: What is on the closet floor?

I ended up purchasing three of these (think 50ish shoes including winter boots, hiking boots, high heels, sandals, flip-flop, tennis shoes...the whole gamut) and I really like them. Generally pretty easy to put together, sometimes the shelves get a bit stuck but you can take off black liner and it will go in then. They are pretty sturdy and it is so nice to not have shoes all over my closet floor any more.

Answer: nice to not have shoes

I ended up purchasing three of these (think 50ish shoes including winter boots, hiking boots, high heels, sandals, flip-flop, tennis shoes...the whole gamut) and I really like them. Generally pretty easy to put together, sometimes the shelves get a bit stuck but you can take off black liner and it will go in then. <hl> They are pretty sturdy and it is so nice to not have shoes all over my closet floor any more. <hl>

I ended up purchasing three of these (think 50ish shoes including winter boots, hiking boots, high heels, sandals, flip-flop, tennis shoes...the whole gamut) and I really like them. Generally pretty easy to put together, sometimes the shelves get a bit stuck but you can take off black liner and it will go in then. They are pretty sturdy and it is so <hl> nice to not have shoes <hl> all over my closet floor any more.


Question: Who graduated recently?

My daughter recently graduated college, and for Christmas she asked for a set of mixing bowls. I looked at numerous sets in stores, as well as on line and decided to purchase these, as they looked to be both sturdy and functional.The bowls are made a a moderately heavy gauge of stainless steel and I believe they will hold up well in normal kitchen use. They are not designed for commercial use and would get damaged pretty quickly if used in that manner. They are wider than I anticipated, as well as shallower. This is a double edged coin. The shape makes them easier to hold in your hands to mix and stir, but it makes the bottom of the bowl smaller and more difficult to balance when placed flat on a surface.Overall, my daughter is pleased with the bowls and has had good luck using them. If they work well and stand up to moderately heavy use, then they are a wise purchase. I would buy them again!

Answer: daughter

<hl> My daughter recently graduated college, and for Christmas she asked for a set of mixing bowls. <hl> I looked at numerous sets in stores, as well as on line and decided to purchase these, as they looked to be both sturdy and functional. The bowls are made a a moderately heavy gauge of stainless steel and I believe they will hold up well in normal kitchen use. They are not designed for commercial use and would get damaged pretty quickly if used in that manner. They are wider than I anticipated, as well as shallower. This is a double edged coin. The shape makes them easier to hold in your hands to mix and stir, but it makes the bottom of the bowl smaller and more difficult to balance when placed flat on a surface. Overall, my daughter is pleased with the bowls and has had good luck using them. If they work well and stand up to moderately heavy use, then they are a wise purchase. I would buy them again!

My <hl> daughter <hl> recently graduated college, and for Christmas she asked for a set of mixing bowls. I looked at numerous sets in stores, as well as on line and decided to purchase these, as they looked to be both sturdy and functional.The bowls are made a a moderately heavy gauge of stainless steel and I believe they will hold up well in normal kitchen use. They are not designed for commercial use and would get damaged pretty quickly if used in that manner. They are wider than I anticipated, as well as shallower. This is a double edged coin. The shape makes them easier to hold in your hands to mix and stir, but it makes the bottom of the bowl smaller and more difficult to balance when placed flat on a surface.Overall, my daughter is pleased with the bowls and has had good luck using them. If they work well and stand up to moderately heavy use, then they are a wise purchase. I would buy them again!


Question: Was the author happy with the second use of the product?

I read everything about this in the reviews before I made this purchase, When it arrived all the instructions were followed and we put it together. The next weekend, It was great..worked wonderful and I put all the attachments on for the steps. After some painting was done there were some areas I hadn't cleaned the first time so I brought it out and started to clean and found it was not sucking up the water..the little door in the front keeps popping back up and loses the suction. I got it back in but if this is going to keep happening I am going to return it. I did write an e mail to Hoover about it but have not received any answers on how to permanently fix this one little issue. It is easier to use than the older one I had but I replaced it because of the same exact reason, it would not suck the water back up.So while I was very happy with the first use, not so much the second use and I will see now that I think I fixed the problem what happens the third time. I order on line because I cannot go pick up heavy items such as this nor take it to a shop to have it repaired..it shouldn't need any repairs for years in my opinion. I rely on products this large being Hassle free!

Answer: I was very happy with the first use, not so much the second use

I read everything about this in the reviews before I made this purchase, When it arrived all the instructions were followed and we put it together. The next weekend, It was great..worked wonderful and I put all the attachments on for the steps. After some painting was done there were some areas I hadn't cleaned the first time so I brought it out and started to clean and found it was not sucking up the water..the little door in the front keeps popping back up and loses the suction. I got it back in but if this is going to keep happening I am going to return it. I did write an e mail to Hoover about it but have not received any answers on how to permanently fix this one little issue. It is easier to use than the older one I had but I replaced it because of the same exact reason, it would not suck the water back up. <hl> So while I was very happy with the first use, not so much the second use and I will see now that I think I fixed the problem what happens the third time. <hl> I order on line because I cannot go pick up heavy items such as this nor take it to a shop to have it repaired..it shouldn't need any repairs for years in my opinion. I rely on products this large being Hassle free!

I read everything about this in the reviews before I made this purchase, When it arrived all the instructions were followed and we put it together. The next weekend, It was great..worked wonderful and I put all the attachments on for the steps. After some painting was done there were some areas I hadn't cleaned the first time so I brought it out and started to clean and found it was not sucking up the water..the little door in the front keeps popping back up and loses the suction. I got it back in but if this is going to keep happening I am going to return it. I did write an e mail to Hoover about it but have not received any answers on how to permanently fix this one little issue. It is easier to use than the older one I had but I replaced it because of the same exact reason, it would not suck the water back up.So while <hl> I was very happy with the first use, not so much the second use <hl> and I will see now that I think I fixed the problem what happens the third time. I order on line because I cannot go pick up heavy items such as this nor take it to a shop to have it repaired..it shouldn't need any repairs for years in my opinion. I rely on products this large being Hassle free!


Question: What is the maximum amount of time the warming plate can stay on?

I have purchased and returned 3 coffee makers in the last 4 months before buying this one. All the ones before this lacked in different features that I think is vital for a good coffee maker. To name a few, water temperature, brew strength and quality construction. This coffee maker is great, it heats the water very well resulting in the brewed coffee @ 165-168 degrees F. It has a very good warming plate that can be adjusted to stay on from 10 to 120 min. and 3 temperature settings (low, medium and high). It has 2 brew strengths (regular and strong), that really work. It has a water filter so you can use water straight from the tap. It comes with a gold tone cone shape filter and it is programmable. I'm glad I purchased mine from Amazon.com when I did for $69.99 because it went up $10 a few days later. So far I am completely satisfied with this coffee maker.

Answer: 120 min

I have purchased and returned 3 coffee makers in the last 4 months before buying this one. All the ones before this lacked in different features that I think is vital for a good coffee maker. To name a few, water temperature, brew strength and quality construction. <hl> This coffee maker is great, it heats the water very well resulting in the brewed coffee @ 165-168 degrees F. It has a very good warming plate that can be adjusted to stay on from 10 to 120 min . <hl> and 3 temperature settings (low, medium and high). It has 2 brew strengths (regular and strong), that really work. It has a water filter so you can use water straight from the tap. It comes with a gold tone cone shape filter and it is programmable. I'm glad I purchased mine from Amazon.com when I did for $69.99 because it went up $10 a few days later. So far I am completely satisfied with this coffee maker.

I have purchased and returned 3 coffee makers in the last 4 months before buying this one. All the ones before this lacked in different features that I think is vital for a good coffee maker. To name a few, water temperature, brew strength and quality construction. This coffee maker is great, it heats the water very well resulting in the brewed coffee @ 165-168 degrees F. It has a very good warming plate that can be adjusted to stay on from 10 to <hl> 120 min <hl>. and 3 temperature settings (low, medium and high). It has 2 brew strengths (regular and strong), that really work. It has a water filter so you can use water straight from the tap. It comes with a gold tone cone shape filter and it is programmable. I'm glad I purchased mine from Amazon.com when I did for $69.99 because it went up $10 a few days later. So far I am completely satisfied with this coffee maker.

This coffee maker is great, it heats the water very well resulting in the brewed coffee @ 165-168 degrees F. It has a very good warming plate that can be adjusted to stay on from 10 to <hl> 120 min <hl> .


Question: Does the mold need to sit overnight?

I have purchased Fred Cool Products in the past to make ice. When I saw that they had a mold for Shot Glasses I knew I would give it a try. Ok making ice is pretty basic but these tips I have learned the hard way. First I start out using bottled water and I pour nice and slow so the mold is even. Make sure that you pour evenly and that you have a flat spot in the freezer so they freeze evenly. I than wait 6 hours. I get a plastic bag out and put the tray over it than I gently hit the tray with hammer to help the shooters come out and than I catch them in the bag (I had lots fall out and end up on the floor before i started catching them in a bag.The glasses are a hit for all my friends but remember these are for shots not sipping. Pour a drink and do the shot unless you are using a chilled beverage your glass will start melting instantly. Also, remind your guests to disgard the glasses into the sink once they are done or once again you will have a mess. I have done glasses with coke and poured rum in, I have also kool-aid and poured vodka in. I encourage people to lick the glass and than do the shot.These glasses solve the problem of what to do for big parties and limited shot glasses just start a week ahead you can have as many glasses as you need. Everyone will talk about it and it really adds a sense of fun to your parties.

Answer: 6 hours

I than wait 6 hours .

I have purchased Fred Cool Products in the past to make ice. When I saw that they had a mold for Shot Glasses I knew I would give it a try. Ok making ice is pretty basic but these tips I have learned the hard way. First I start out using bottled water and I pour nice and slow so the mold is even. Make sure that you pour evenly and that you have a flat spot in the freezer so they freeze evenly. <hl> I than wait 6 hours . <hl> I get a plastic bag out and put the tray over it than I gently hit the tray with hammer to help the shooters come out and than I catch them in the bag (I had lots fall out and end up on the floor before i started catching them in a bag. The glasses are a hit for all my friends but remember these are for shots not sipping. Pour a drink and do the shot unless you are using a chilled beverage your glass will start melting instantly. Also, remind your guests to disgard the glasses into the sink once they are done or once again you will have a mess. I have done glasses with coke and poured rum in, I have also kool-aid and poured vodka in. I encourage people to lick the glass and than do the shot. These glasses solve the problem of what to do for big parties and limited shot glasses just start a week ahead you can have as many glasses as you need. Everyone will talk about it and it really adds a sense of fun to your parties.

I have purchased Fred Cool Products in the past to make ice. When I saw that they had a mold for Shot Glasses I knew I would give it a try. Ok making ice is pretty basic but these tips I have learned the hard way. First I start out using bottled water and I pour nice and slow so the mold is even. Make sure that you pour evenly and that you have a flat spot in the freezer so they freeze evenly. I than wait <hl> 6 hours <hl>. I get a plastic bag out and put the tray over it than I gently hit the tray with hammer to help the shooters come out and than I catch them in the bag (I had lots fall out and end up on the floor before i started catching them in a bag.The glasses are a hit for all my friends but remember these are for shots not sipping. Pour a drink and do the shot unless you are using a chilled beverage your glass will start melting instantly. Also, remind your guests to disgard the glasses into the sink once they are done or once again you will have a mess. I have done glasses with coke and poured rum in, I have also kool-aid and poured vodka in. I encourage people to lick the glass and than do the shot.These glasses solve the problem of what to do for big parties and limited shot glasses just start a week ahead you can have as many glasses as you need. Everyone will talk about it and it really adds a sense of fun to your parties.


Question: What did they install afterwards?

These shelves are about average for this type of shelves. They may be just a bit harder than some to get the top leg halves installed. End of review (for the review police). What worked for me was to install the two bottom shelves, including the boards, being careful to seat the side and end rail rivets securely in the slots using a 12" 2x4 or mallet. Then install the mid-point shelf brackets in the top hole for each leg and go ahead and add the board. Then you can slip the top leg half in by tilting the top end inwards and sliding onto the top rivet then straightening. Makes it much easier.

Answer: top leg half

These shelves are about average for this type of shelves. They may be just a bit harder than some to get the top leg halves installed. End of review (for the review police). What worked for me was to install the two bottom shelves, including the boards, being careful to seat the side and end rail rivets securely in the slots using a 12" 2x4 or mallet. Then install the mid-point shelf brackets in the top hole for each leg and go ahead and add the board. <hl> Then you can slip the top leg half in by tilting the top end inwards and sliding onto the top rivet then straightening. <hl> Makes it much easier.

These shelves are about average for this type of shelves. They may be just a bit harder than some to get the top leg halves installed. End of review (for the review police). What worked for me was to install the two bottom shelves, including the boards, being careful to seat the side and end rail rivets securely in the slots using a 12" 2x4 or mallet. Then install the mid-point shelf brackets in the top hole for each leg and go ahead and add the board. Then you can slip the <hl> top leg half <hl> in by tilting the top end inwards and sliding onto the top rivet then straightening. Makes it much easier.


Question: What have you baked in the pan?

Visitors to my kitchen spot this pan and often ask what I use it to do. My answer: "Name it". Sautee some chopped onions before adding in fresh fish or poultry? Check. Scamble up an omelet with saugage on the side? Not a problem. Mix up a batch of cornbread dough, pour it into this pan then pop in the oven? Don't waste my time!It's just a terrific can-do pan that does everything I've dreamed up for it to do, cleans easily, and is ready for more. I've even started a few meat dishes in the pan before finishing them in the oven, that is browning on the stove top and slow roasting or baking in the oven to finish up. If you don't have one of these pans in your kitchen, you need to add it to your collection because you'll wonder, as I have, how you got along without it to this point.

Answer: cornbread

Visitors to my kitchen spot this pan and often ask what I use it to do. My answer: "Name it". Sautee some chopped onions before adding in fresh fish or poultry? Check. Scamble up an omelet with saugage on the side? Not a problem. <hl> Mix up a batch of cornbread dough, pour it into this pan then pop in the oven? <hl> Don't waste my time!It's just a terrific can-do pan that does everything I've dreamed up for it to do, cleans easily, and is ready for more. I've even started a few meat dishes in the pan before finishing them in the oven, that is browning on the stove top and slow roasting or baking in the oven to finish up. If you don't have one of these pans in your kitchen, you need to add it to your collection because you'll wonder, as I have, how you got along without it to this point.

Visitors to my kitchen spot this pan and often ask what I use it to do. My answer: "Name it". Sautee some chopped onions before adding in fresh fish or poultry? Check. Scamble up an omelet with saugage on the side? Not a problem. Mix up a batch of <hl> cornbread <hl> dough, pour it into this pan then pop in the oven? Don't waste my time!It's just a terrific can-do pan that does everything I've dreamed up for it to do, cleans easily, and is ready for more. I've even started a few meat dishes in the pan before finishing them in the oven, that is browning on the stove top and slow roasting or baking in the oven to finish up. If you don't have one of these pans in your kitchen, you need to add it to your collection because you'll wonder, as I have, how you got along without it to this point.


Question: Why does the product require a lot of ice?

If you are an iced tea addict too, then look no further.It does indeed require a fair amount of ice-- but let's think about why. TEA requires HOT WATER to brew. You want your tea to be iced. So you have two choices: you can brew it hot, stick it in the fridge, and wait about five days until it reaches the right temperature. OR, you can use ice.This machine proportions it all PERFECTLY. ''Weak tea'' only happens when you don't use enough teabags. I get the best results with 5 or 6 regular teabags. It takes 5-10 minutes to brew a full pitcher, which is then ready to drink right away, nice and chilled.The reason this only gets 4 stars out of 5 is because cleaning it takes a little effort. (Ridges in basked, as mentioned before.) But you don't have to do that too often.BTW, a surprisingly great tea is the decaf "Ambience" blend from... of all places... Smart & Final! This makes a PERFECT iced tea. We go through a pitcher or two a day in the summer.And for the price, it can't be beat! What else are you going to do-- use a coffeemaker? The stove? Forget it! Load up the Salton, push a button, and you're on your way.

Answer: TEA requires HOT WATER to brew

TEA requires HOT WATER to brew .

If you are an iced tea addict too, then look no further. It does indeed require a fair amount of ice-- but let's think about why. <hl> TEA requires HOT WATER to brew . <hl> You want your tea to be iced. So you have two choices: you can brew it hot, stick it in the fridge, and wait about five days until it reaches the right temperature. OR, you can use ice. This machine proportions it all PERFECTLY. '' Weak tea'' only happens when you don't use enough teabags. I get the best results with 5 or 6 regular teabags. It takes 5-10 minutes to brew a full pitcher, which is then ready to drink right away, nice and chilled. The reason this only gets 4 stars out of 5 is because cleaning it takes a little effort. (Ridges in basked, as mentioned before.) But you don't have to do that too often. BTW, a surprisingly great tea is the decaf "Ambience" blend from... of all places... Smart & Final! This makes a PERFECT iced tea. We go through a pitcher or two a day in the summer. And for the price, it can't be beat! What else are you going to do-- use a coffeemaker? The stove? Forget it! Load up the Salton, push a button, and you're on your way.

If you are an iced tea addict too, then look no further.It does indeed require a fair amount of ice-- but let's think about why. <hl> TEA requires HOT WATER to brew <hl>. You want your tea to be iced. So you have two choices: you can brew it hot, stick it in the fridge, and wait about five days until it reaches the right temperature. OR, you can use ice.This machine proportions it all PERFECTLY. ''Weak tea'' only happens when you don't use enough teabags. I get the best results with 5 or 6 regular teabags. It takes 5-10 minutes to brew a full pitcher, which is then ready to drink right away, nice and chilled.The reason this only gets 4 stars out of 5 is because cleaning it takes a little effort. (Ridges in basked, as mentioned before.) But you don't have to do that too often.BTW, a surprisingly great tea is the decaf "Ambience" blend from... of all places... Smart & Final! This makes a PERFECT iced tea. We go through a pitcher or two a day in the summer.And for the price, it can't be beat! What else are you going to do-- use a coffeemaker? The stove? Forget it! Load up the Salton, push a button, and you're on your way.

<hl> TEA requires HOT WATER to brew <hl> .


Question: How many cupcakes did the reviewer make?

I used the recipe (in the encluded book) for vanilla cupcakes but used lemon extract instead of vanilla. Makes enough batter for 3 batches of 7. Just perfect. I tried the final batch without paper cups and they work fine if you like a little more of a crispy outside. The tops didn't brown but they were totally cooked. No clean up to speak of. Didn't have to heat up an oven. Very nifty little gadget. BTW I bought one of the used/like new ones listed for a few $$ savings. Looks new to me but the box had been opened is all.

Answer: 3 batches of 7

I used the recipe (in the encluded book) for vanilla cupcakes but used lemon extract instead of vanilla. <hl> Makes enough batter for 3 batches of 7 . <hl> Just perfect. I tried the final batch without paper cups and they work fine if you like a little more of a crispy outside. The tops didn't brown but they were totally cooked. No clean up to speak of. Didn't have to heat up an oven. Very nifty little gadget. BTW I bought one of the used/like new ones listed for a few $$ savings. Looks new to me but the box had been opened is all.

I used the recipe (in the encluded book) for vanilla cupcakes but used lemon extract instead of vanilla. Makes enough batter for <hl> 3 batches of 7 <hl>. Just perfect. I tried the final batch without paper cups and they work fine if you like a little more of a crispy outside. The tops didn't brown but they were totally cooked. No clean up to speak of. Didn't have to heat up an oven. Very nifty little gadget. BTW I bought one of the used/like new ones listed for a few $$ savings. Looks new to me but the box had been opened is all.

Makes enough batter for <hl> 3 batches of 7 <hl> .


Question: Is the product well made?

Unbelievable quality! Extremely well made - padded; great zippers. bottom unsnaps to provide 3" gusset for bigger items... camera, glasses, even in a big case! Side pockets also padded and large! (I have Samsung Galaxy s4 and it fits great, with EASY access. Even my wallet fits in this thing. I know some reviews said there was no padding, which was one reason I order the grey...all those reviews looked good. But, I might take my chance on another color, just because I love this so much and might keep one packed esp. for travel.

Answer: Extremely

<hl> Unbelievable quality! Extremely well made - padded; great zippers. <hl> bottom unsnaps to provide 3" gusset for bigger items... camera, glasses, even in a big case! Side pockets also padded and large! (I have Samsung Galaxy s4 and it fits great, with EASY access. Even my wallet fits in this thing. I know some reviews said there was no padding, which was one reason I order the grey...all those reviews looked good. But, I might take my chance on another color, just because I love this so much and might keep one packed esp. for travel.

Unbelievable quality! <hl> Extremely <hl> well made - padded; great zippers. bottom unsnaps to provide 3" gusset for bigger items... camera, glasses, even in a big case! Side pockets also padded and large! (I have Samsung Galaxy s4 and it fits great, with EASY access. Even my wallet fits in this thing. I know some reviews said there was no padding, which was one reason I order the grey...all those reviews looked good. But, I might take my chance on another color, just because I love this so much and might keep one packed esp. for travel.


Question: What does the product have problems with?

If you've used the longer cooking chopsticks before these have a similar feel. They're metal with a heavy silicon coating. Multi-functional and agile, not clumsy like regular larger tongs. I tend to hold these with a more chopstick-like grip when working with delicate items as it provides more control and precision, such as stuffed mushrooms. These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts, though I have not done a test of this. I find myself using these often for things such as stir-frying, serving noodles, handling scallops, and even chicken nuggets. I recommend these to everyone looking for silicon tongs when precision is important, build and material quality are excellent.I will update when I have used these for heavier items.

Answer: These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts

If you've used the longer cooking chopsticks before these have a similar feel. They're metal with a heavy silicon coating. Multi-functional and agile, not clumsy like regular larger tongs. I tend to hold these with a more chopstick-like grip when working with delicate items as it provides more control and precision, such as stuffed mushrooms. <hl> These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts , though I have not done a test of this. <hl> I find myself using these often for things such as stir-frying, serving noodles, handling scallops, and even chicken nuggets. I recommend these to everyone looking for silicon tongs when precision is important, build and material quality are excellent. I will update when I have used these for heavier items.

If you've used the longer cooking chopsticks before these have a similar feel. They're metal with a heavy silicon coating. Multi-functional and agile, not clumsy like regular larger tongs. I tend to hold these with a more chopstick-like grip when working with delicate items as it provides more control and precision, such as stuffed mushrooms. <hl> These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts <hl>, though I have not done a test of this. I find myself using these often for things such as stir-frying, serving noodles, handling scallops, and even chicken nuggets. I recommend these to everyone looking for silicon tongs when precision is important, build and material quality are excellent.I will update when I have used these for heavier items.

<hl> These are grill worthy but seem like they might have trouble with heavier items like large chicken breasts <hl> , though I have not done a test of this.


Question: What does the baker love doing?

I love baking my own bread and needed something to help me cut the slices evenly. This item works for the most part, but the plastic end has warped which makes for an uneven cut. I would suggest making the end more sturdy and less susceptible to bend.

Answer: baking my own bread

<hl> I love baking my own bread and needed something to help me cut the slices evenly. <hl> This item works for the most part, but the plastic end has warped which makes for an uneven cut. I would suggest making the end more sturdy and less susceptible to bend.

I love <hl> baking my own bread <hl> and needed something to help me cut the slices evenly. This item works for the most part, but the plastic end has warped which makes for an uneven cut. I would suggest making the end more sturdy and less susceptible to bend.


Question: What is it?

We bought this cover for our mattresses at home. They work great. Our youngest has had many accidents on it and we just keep washing it. It has breathable sides which is really reassuring in case if any moisture is underneath for whatever reason we don't have to worry about puling the cover off and discovering a mildew.So that is why we bought this last bunch of covers for our ski house. When we are not using it, we are renting it out or lending it to friends / colleagues and we want the mattresses to last forever. Plus is it just more hygienic.

Answer: hygienic

Plus is it just more hygienic .

We bought this cover for our mattresses at home. They work great. Our youngest has had many accidents on it and we just keep washing it. It has breathable sides which is really reassuring in case if any moisture is underneath for whatever reason we don't have to worry about puling the cover off and discovering a mildew. So that is why we bought this last bunch of covers for our ski house. When we are not using it, we are renting it out or lending it to friends / colleagues and we want the mattresses to last forever. <hl> Plus is it just more hygienic . <hl>

We bought this cover for our mattresses at home. They work great. Our youngest has had many accidents on it and we just keep washing it. It has breathable sides which is really reassuring in case if any moisture is underneath for whatever reason we don't have to worry about puling the cover off and discovering a mildew.So that is why we bought this last bunch of covers for our ski house. When we are not using it, we are renting it out or lending it to friends / colleagues and we want the mattresses to last forever. Plus is it just more <hl> hygienic <hl>.

Plus is it just more <hl> hygienic <hl> .


Question: What is a problem with the hand-held vacuums the customer previously ownded?

With two cats, little messes--litter, catnip, fur, food--are inevitable, but hauling out the big vac is more of a production than I can usually be bothered with. But my last hand-held vac was a total waste of time and money. It had very little suction and clogged up quickly (you'd think with so little suction that wouldn't happen, but anyway.) Granted, this was about 10 years ago. So it was with some trepidation I selected the Pet hair Eraser. As it turns out, I am reasonably satisfied with it. It has a decent amount of suction, although of course it doesn't do as good a job at the big vac. It picks up litter and cat food quite well, fur and catnip slightly less well. But for a quick tidy-up, it certainly serves its purpose well. I've used it for maybe 15 minutes now and haven't had to recharge it. I do have to empty it after every use (a good sign, really, that it's functioning well). The filter does clog up, but it washes easily.My one big complaint is about the "integrated crevice tool." It's not really a crevice tool so much as a narrow opening for the vac itself. It's not really narrow enough to be a crevice tool, and not really big enough for the vac itself. I wish they hadn't gone for the compromise here.

Answer: little suction and clogged up quickly

With two cats, little messes--litter, catnip, fur, food--are inevitable, but hauling out the big vac is more of a production than I can usually be bothered with. But my last hand-held vac was a total waste of time and money. <hl> It had very little suction and clogged up quickly (you'd think with so little suction that wouldn't happen, but anyway.) <hl> Granted, this was about 10 years ago. So it was with some trepidation I selected the Pet hair Eraser. As it turns out, I am reasonably satisfied with it. It has a decent amount of suction, although of course it doesn't do as good a job at the big vac. It picks up litter and cat food quite well, fur and catnip slightly less well. But for a quick tidy-up, it certainly serves its purpose well. I've used it for maybe 15 minutes now and haven't had to recharge it. I do have to empty it after every use (a good sign, really, that it's functioning well). The filter does clog up, but it washes easily. My one big complaint is about the "integrated crevice tool." It's not really a crevice tool so much as a narrow opening for the vac itself. It's not really narrow enough to be a crevice tool, and not really big enough for the vac itself. I wish they hadn't gone for the compromise here.

With two cats, little messes--litter, catnip, fur, food--are inevitable, but hauling out the big vac is more of a production than I can usually be bothered with. But my last hand-held vac was a total waste of time and money. It had very <hl> little suction and clogged up quickly <hl> (you'd think with so little suction that wouldn't happen, but anyway.) Granted, this was about 10 years ago. So it was with some trepidation I selected the Pet hair Eraser. As it turns out, I am reasonably satisfied with it. It has a decent amount of suction, although of course it doesn't do as good a job at the big vac. It picks up litter and cat food quite well, fur and catnip slightly less well. But for a quick tidy-up, it certainly serves its purpose well. I've used it for maybe 15 minutes now and haven't had to recharge it. I do have to empty it after every use (a good sign, really, that it's functioning well). The filter does clog up, but it washes easily.My one big complaint is about the "integrated crevice tool." It's not really a crevice tool so much as a narrow opening for the vac itself. It's not really narrow enough to be a crevice tool, and not really big enough for the vac itself. I wish they hadn't gone for the compromise here.


Question: how can the nit-picky problem the author describes be fixed

This napkin holder from OXO is a really interesting and cool design. I have to admit that I've never quite seen a napkin holder like it, and it's uniqueness really adds something to an otherwise boring dinner table. I definitely like the feel of it too - it's weighted and so it feels substantial, yer retains its sleek look. When the napkins start to get low in the holder, the weighted arm does make it mildly difficult to neatly pull out napkins - perhaps this is a mild nit-pick which can be easily remedied by just re-filling the napkins. But otherwise, I quite like this napkin holder.

Answer: re-filling the napkins

This napkin holder from OXO is a really interesting and cool design. I have to admit that I've never quite seen a napkin holder like it, and it's uniqueness really adds something to an otherwise boring dinner table. I definitely like the feel of it too - it's weighted and so it feels substantial, yer retains its sleek look. <hl> When the napkins start to get low in the holder, the weighted arm does make it mildly difficult to neatly pull out napkins - perhaps this is a mild nit-pick which can be easily remedied by just re-filling the napkins . <hl> But otherwise, I quite like this napkin holder.

This napkin holder from OXO is a really interesting and cool design. I have to admit that I've never quite seen a napkin holder like it, and it's uniqueness really adds something to an otherwise boring dinner table. I definitely like the feel of it too - it's weighted and so it feels substantial, yer retains its sleek look. When the napkins start to get low in the holder, the weighted arm does make it mildly difficult to neatly pull out napkins - perhaps this is a mild nit-pick which can be easily remedied by just <hl> re-filling the napkins <hl>. But otherwise, I quite like this napkin holder.

When the napkins start to get low in the holder, the weighted arm does make it mildly difficult to neatly pull out napkins - perhaps this is a mild nit-pick which can be easily remedied by just <hl> re-filling the napkins <hl> .


Question: What does the user heat in the microwave?

Great product! I have to say this lunch warmer heats food quite evenly, much better than a microwave. My husband and I keep stash of healthy leftovers in 2 cup round glass containers in the freezer to grab and go. These work beautifully with the lunch warmer. The night before, I choose lunch for the next day, put it in the frig to partially thaw and my lunch is ready to slide into the crock pot warmer once I get to work the next morning. No spills on the way to work as it is partially frozen, and the 2 cup amount is below the max fill line on the metal insert. I must say I am looking forward to our next road trip as I plan taking 2 crock pots, a cooler and an inverter to help minimize the monetary and weight gain expense of travel. I've read complaints about the cord length (3 ft), but any longer would make it awkward to wind and carry. Liked this product so much, I bought 7 of them as gifts, all greatly appreciated....even got a lunch text photo from my son, the engineer and a big thank you from my Marine! Enjoy

Answer: food

Great product! <hl> I have to say this lunch warmer heats food quite evenly, much better than a microwave. <hl> My husband and I keep stash of healthy leftovers in 2 cup round glass containers in the freezer to grab and go. These work beautifully with the lunch warmer. The night before, I choose lunch for the next day, put it in the frig to partially thaw and my lunch is ready to slide into the crock pot warmer once I get to work the next morning. No spills on the way to work as it is partially frozen, and the 2 cup amount is below the max fill line on the metal insert. I must say I am looking forward to our next road trip as I plan taking 2 crock pots, a cooler and an inverter to help minimize the monetary and weight gain expense of travel. I've read complaints about the cord length (3 ft), but any longer would make it awkward to wind and carry. Liked this product so much, I bought 7 of them as gifts, all greatly appreciated....even got a lunch text photo from my son, the engineer and a big thank you from my Marine! Enjoy

Great product! I have to say this lunch warmer heats <hl> food <hl> quite evenly, much better than a microwave. My husband and I keep stash of healthy leftovers in 2 cup round glass containers in the freezer to grab and go. These work beautifully with the lunch warmer. The night before, I choose lunch for the next day, put it in the frig to partially thaw and my lunch is ready to slide into the crock pot warmer once I get to work the next morning. No spills on the way to work as it is partially frozen, and the 2 cup amount is below the max fill line on the metal insert. I must say I am looking forward to our next road trip as I plan taking 2 crock pots, a cooler and an inverter to help minimize the monetary and weight gain expense of travel. I've read complaints about the cord length (3 ft), but any longer would make it awkward to wind and carry. Liked this product so much, I bought 7 of them as gifts, all greatly appreciated....even got a lunch text photo from my son, the engineer and a big thank you from my Marine! Enjoy


Question: how long did the writer have the older model before it developed problems?

I purchased this ice cream maker in 2007 (winter) for $39.99 but did not use it until summer of 2008. This is my second krups. The first one, La Glaciere #358, was purchased in 2000 or so. There were problems with the older model after 5 years of use (and it is still going with problem noted). The bowl left in the freezer became warped and the top would not stay on completely when the ice cream was being made. That being said, it is still better than the most recent one. This one is definitely not worth $130.00. I made ice cream in both of them during Thanksgiving, side by side, and the older one, more heavy duty appear to "churn" to a better consistency. This newer one feels cheaper and the motor doesn't seem to be as powerful. I would not buy the GVS142 again.

Answer: 5 years

I purchased this ice cream maker in 2007 (winter) for $39.99 but did not use it until summer of 2008. This is my second krups. The first one, La Glaciere #358, was purchased in 2000 or so. <hl> There were problems with the older model after 5 years of use (and it is still going with problem noted). <hl> The bowl left in the freezer became warped and the top would not stay on completely when the ice cream was being made. That being said, it is still better than the most recent one. This one is definitely not worth $130.00. I made ice cream in both of them during Thanksgiving, side by side, and the older one, more heavy duty appear to "churn" to a better consistency. This newer one feels cheaper and the motor doesn't seem to be as powerful. I would not buy the GVS142 again.

I purchased this ice cream maker in 2007 (winter) for $39.99 but did not use it until summer of 2008. This is my second krups. The first one, La Glaciere #358, was purchased in 2000 or so. There were problems with the older model after <hl> 5 years <hl> of use (and it is still going with problem noted). The bowl left in the freezer became warped and the top would not stay on completely when the ice cream was being made. That being said, it is still better than the most recent one. This one is definitely not worth $130.00. I made ice cream in both of them during Thanksgiving, side by side, and the older one, more heavy duty appear to "churn" to a better consistency. This newer one feels cheaper and the motor doesn't seem to be as powerful. I would not buy the GVS142 again.