If you like short reviews - stop here!
3889 Industrial_and_Scientific_5 POS 5.0 All Good !! AAA++++
7525 Industrial_and_Scientific_5 POS 5.0 GOOD
Among their standard glues this has a medium viscosity; it is around if not slightly thicker than water. While they say this is gap filling I've never had much luck spanning gaps. It does offer a little more time than their super-thin glue which can make all the difference in lining things up.
The unit I received didn't have a functioning lock for the right side cabinet door. The little bar that rotates to lock the door shut is missing. It's easy to acquire and install one, I'll do that someday.
4653 Industrial_and_Scientific_5 POS 5.0 YUP, got them, they look exactly like the one's at home-depot.
Jimmy Wong
3876 Industrial_and_Scientific_5 POS 5.0 WELDED MY RADIATOR ON A HONDA 1800 VTX A YEAR AGO AND IS STILL HOLDING. GREAT STUFF.
8773 Industrial_and_Scientific_5 POS 5.0 good value for the money
Before the NFA1000 the ME3851A/ME3951 were the models most used by professionals
Stickiness can make some applications difficult
3877 Industrial_and_Scientific_5 POS 5.0 I bought a new black granite sink. I put it in, which is a hassle and takes a bit of time. I then noticed that the sink had a very small hole in the back inside which did not go entirely through the sink. It was likely just a bubble in the granite mix that came to the surface and remained unseen until it got to me. The hole was about a quarter of an inch in size. I didn't want to take out the sink and replace it for two reasons: one it is a lot of work and two it seems like such a waste of materials in the environmental sense.
3693 Industrial_and_Scientific_5 POS 4.0 Good Product, good price...
Jam free and rarely brake apart.
6104 Industrial_and_Scientific_5 POS 5.0 I'm an electrical engineer and very particular about secure wiring and strain relief. These guys are perfect for routing LAN, 1/4 microphone/instrument and coaxial cables. I recommend drilling a small 1/2" depth pilot hole to prevent cracking and excessive screwing force (people have been commenting about stripped screws). Just wrap a piece of electrical tap around your drill bit to ensure precise depth. I would also recommend a nut driver over a Philips head, as it just works better. 100 of these guys for 7 bucks is a great deal! You can always use more anyway, *wink*
Shank Size Across flats: 1/4
5362 Industrial_and_Scientific_5 POS 5.0 Its a nice system but putting the parts in a kit would be better because this isn't all youll need. To install a door on a trolley system you need the track, hanger brackets & roller assembly for the key components and then likely the sliding bumper, stay roller, end cap and a handle. I originally purchased enough parts to have a door system that closed in the center of the doorway and when I made the doorway smaller I had some extra parts. I never thought Id use them again but I decided it was time to expand my 2-car size garage that only had a single wide overhead door so I could actually get my Ford Expedition in for the winter. I found a used single 8 high x 7 wide solid steel door that lifted up and over the vehicle. However, though I could barely get the vehicle in the garage I couldn't walk behind it to get out of the garage. Something had to give so I decided to take the door off the rail system, remove all the overhead hardware and install the door outside the garage rather than inside and that gave me 9 more of floor space: 6 for the wall thickness, 2 for the door thickness and about another 1 for the tracks holding the door a little more inside than needed. Since my opening was 8 wide I used two 8 sections of track you can use less by setting the rollers in farther 2 at each end of the door and setting the track back on the closing side but my door weighs about 250-pounds so I wanted the rollers close to the ends for a smoother roll. With 2-sections of track you need 3 hangers at the minimum one at each end of the track and one in the center that joins them together make sure the center one has 2-setscrews on it or it won't work for joining 2-rails. The instructions call for a hanger about every two-feet but thats overkill and theres no way the rail will bend unless you're using it to roll an auto engine across it. I had to go with a larger stay roller because the 44140 allows for a 2-1/4 max door and mine is 2 so it was too tight for an easy the slide. The tracks plus the door are a lot of weight so this has to go up with lag bolts into studs or with carriage bolts and large washers into the sheathing. Once you start rolling the door open theres a lot of momentum heading toward the end of the rail so I just drilled mine out and used a lag bolt with the end cap. The rollers are enclosed from the weather so they stay lubricated and you can hang a door almost flush with the exterior wall and I used some garage door rubber side seal screwed into the door for a draft free closing. If you don't use the bumper and stay roller the door will swing out at the bottom and I added a boxed end on the closure end to keep the weather out on one end and the rail does a pretty good job on the top. The cost adds up fast with all the parts but not having a door inside the garage gave me the added space, I now have ceiling hooks over the vehicle, I don't need a garage door opened and theres no chance a spring is going to snap but this industrial look may not be aesthetic enough for some but when the hardware is painted it looks pretty sharp. Lastly, the hangers added enough additional height so that I could mount the rails right over my overhead door next to it. I did buy some parts at the home centers and their pricing was pretty good but were hard to find because they were in the back of the store with the doors & windows in one and with in the fence aisle at the other. Since this is like a giant erector set its a pass/fail so it gets 5-stras and since you cant do it with just one part Im using the same review for all the parts. Also check all the hardware variations shown on Amazon because National and Stanley are both interchangeable.
452 Industrial_and_Scientific_5 POS 5.0 I used this tool to put eyes into a sheet of canvas to use as a sunshade. Works great, well made, no complaints. I thought the little square of hardwood they included would be redundant but actually it's really useful, I tried using pine instead as a backstop and it was way too soft.
348 Industrial_and_Scientific_5 POS 4.0 It boils down to this: this is an entirely featureless, overpriced piece of short plastic pipe. But it does exactly what it needs to do.
2378 Industrial_and_Scientific_5 POS 4.0 We keep two of these, one upstairs and one downstairs for quick clean-up jobs. It saves us the task of using our house vacuum proper which is the size of a small car engine but barely picks up bird seed, so here's a tip, if you want a vacuum to actually suck then get rid of all the filters, including Hepa and the like. On the Flair there are two filters, one each side of the main body, remove the plastic filter grills, unhook the foam filters, throw them away and replace the grills. Do this with all your vacuum's and they will then perform as anyone would expect. The Flair's don't last forever but for the money, ease of use and for having a power head, which is perfect for cleaning stair carpet, they are indispensable.
2083 Industrial_and_Scientific_5 POS 5.0 Good
You can finally put an end to the neighbor's pesky dog pooping in your yard.
Buy this duct tape. Have it on-hand for ... well, just about anything! It is AMAZING!
1. Sturdy / Heavy duty.
7461 Industrial_and_Scientific_5 POS 5.0 What do you expect?
795 Industrial_and_Scientific_5 POS 4.0 This was a good kit for the project I was working on and has all the parts you need. The fit and finish looked good and easy to use.
Outstanding quality and functionality at a great price. Highly recommend.
9897 Industrial_and_Scientific_5 POS 4.0 This tape is bluish in color. Really. How can you go wrong with BLUE duct tape!
5689 Industrial_and_Scientific_5 POS 4.0 Is used by a lot of companies to lube the chains of motorcycles.
236 Industrial_and_Scientific_5 POS 5.0 This bags are kind of expensive but they trap fine dust and particles so you don't end up breathing them in. I only use about 2 bags a year so they aren't a major expense in spite of their price.
Room for improvement:
6943 Industrial_and_Scientific_5 POS 4.0 hinge is great. screws to mount hinge are terrible, very easily stripped heads
I'd say it's worth spending the extra buck or two for safety!
7219 Industrial_and_Scientific_5 POS 5.0 I got this for an unusual purpose. I wear a hoop skirt when I volunteer in a historic state park. The connectors on the hoops kept coming off and I needed something I could slide over the metal that would hold the two ends together without poking me or tearing the fabric apart. This was perfect for that!
911 Industrial_and_Scientific_5 POS 4.0 Needed lond lasting casters for rarely moved shelf. Being metal this is the perfect one for my shelving. I recommend this if you like to be able to move shelves around on concrete flooring..
603 Industrial_and_Scientific_5 POS 5.0 Tape is nice. Very flexible. Time will tell how it holds up as most electrical tapes start to get melty over time.
Negatives:
5 star item based on quality, usefulness, and price. If I come across a need for hooks again, I will definitely be buying thse.
Having said that, these are about 1/2 the price of a Type II and are ideal for bulk storage of gas. If you are filling something that has the fill spot on top, then this works great. For me, it's about having gas available during winter - mainly storage - rather than pouring, so this fits my needs perfectly. Twice a season I change the gas out and I can put up with the funnel on my equipment.
9901 Industrial_and_Scientific_5 POS 5.0 This is just a nice big roll of plain old duct tape. It is as soft blue that reminds me of the 80's country blue decor. The tape tears easily while still being tough. The adhesive is great. What you stick will stay stuck. Even the edges don't come up.
It started to leak about 6 months later and the end had to be replaced.
Pros:
5283 Industrial_and_Scientific_5 POS 4.0 I use this mainly for repairing my fen boots. The surface needs to well roughened and clean for it to stick well. It shouldn't make a difference but the black version of this seems to have worked better than this clear version for me. It is thicker than Aquaseal so it doesn't go into as small crevices but it is cheaper and can be used when there is a wide gap between the surfaces, like for reattaching soles.
8468 Industrial_and_Scientific_5 POS 5.0 Finding large diameter shrink is difficult. In LA it is easy, but here it is nearly impossible. I found an 8" long 1" diameter at Home Depot, but this whole package was less than that one piece. You can cut any length you need, and still have lots to use elsewhere. And yes, with a heat gun it does shrink, just as advertised.
2314 Industrial_and_Scientific_5 POS 5.0 Great tubs, thick plastic, very durable.
5484 Industrial_and_Scientific_5 POS 4.0 It is definitely large. I had to add ceramic to continue doing some rocks, as I found out the hard way the mixing different hardness rocks is costly. Also, if I could afford it, I would only use this for the coarsest tumbling and then go to a vibratory setup. Because this tumbler holds so much stone, if you try to take it all the way to a polish the chances are that a chip or chips will break off and damage a lot of stone during the finer tumbling. I would also state that this tumbler lacks some of the touches that I would consider I high quality unit, but it seems durable for the price. I have been using this constantly for the last two months.
4085 Industrial_and_Scientific_5 POS 5.0 A++++
4946 Industrial_and_Scientific_5 POS 5.0 perfect quality and fit
4732 Industrial_and_Scientific_5 POS 5.0 I needed a reliable stethoscope for care of a stroke patient and my daughter, an ICU Nurse, highly recommended the 3M Littmann Classic II S.E. Stethoscope, Black Tube, 28 inch, 2201. After some research I learned the technical reasons why this unit is considered as the "standard" by most medical personnel. Aside from the high quality of components, it faithfully transmits key sound waves to the ears from the patient. While I am not skilled at descerning the differences in verious organ sounds, taking blood pressure is so much easier than with the "cheap" units I previouly used. It's well worth the price of investment in a quality piece of equipment.
9444 Industrial_and_Scientific_5 POS 5.0 An exceptional deal. If you are needing a general start to a peg board and are not looking for a particular item. This has most every hook you might need. High Quality.
8456 Industrial_and_Scientific_5 POS 5.0 This foil tape is extremely sticky and "malleable," unlike other tapes, because it is, after all, foil. It is used predominately in duct work (dryers, etc.), but I could see this foil tape having many other uses. If you have any potential use for this tape, you won't be disappointed. I will say, however, that if you want a larger quantity of this, it is also offered in 50 yard rolls for a fair price.
7897 Industrial_and_Scientific_5 POS 5.0 Got this for making AR-15 (A1 buffer tube) adapters for using M4 buffer & spring assemblies. Turned on lathe to proper diameter & cut to length; material cut smoothly. Quality stock material with no voids or flaws. Came cut to exact 12" length. Save me money & wasted material in long run buying through Amazon for short lentgths. Recommend iit for those who need such stock.
1469 Industrial_and_Scientific_5 NEG 2.0 I did not buy 2-P10 adhesive from/through Amazon. CA glues of any viscosity do not work well with wood as a means of making solid permanent joints. Oh, it sets up in a few seconds and faster when an accelerator is used, but the bond/joint is easily broken especially when a twisting or torsioning force is applied to the joint, much easier than a true wood glue joint. 2-P10 exhibits all the positive aspects of any CA glue - and the negatives, too.
If you have to have an RV hose go with the blue one.
770 Industrial_and_Scientific_5 POS 5.0 Great switch handles the air compressor nicely I have mounted in my bed.
3326 Industrial_and_Scientific_5 POS 5.0 Its small enough that i can use it in tight places to compress suspension components when needed to work on suspensions and i have found its even useful to jack up the riding lawn mower. Love it
7637 Industrial_and_Scientific_5 POS 5.0 My packaging was different, but this works well. I used it for file folder games. Only a couple of pieces have not stuck after initial application. Generally those have failed within a day or two of the cure time. I assume those are because there was oil from fingertips on the surface.
2693 Industrial_and_Scientific_5 POS 5.0 Took a long time to get here but was good for the price.
4236 Industrial_and_Scientific_5 POS 5.0 Great magnet. I mounted a mist coolant nozzle to it and it holds great (wish I could say that about the mist coolant unit)
7508 Industrial_and_Scientific_5 POS 4.0 Great quality at a great price.
3955 Industrial_and_Scientific_5 POS 5.0 Excellent Product
8022 Industrial_and_Scientific_5 POS 5.0 Just what I needed to manufacture a shroud around my oil cooler and fan set up for my sportster. It may not look completely professional, with molded curves, etc. but it will look good enough, and will be sturdy and well built, and will work better than any kit I've seen out there for mucho more dinero. If you're considering doing something like that, a B7B tru cool oil cooler, and the Protechnic Fans, 12 V, 92 x 92 x 32mm, 4800 RPM MGA9212XB-032 IP68 high output fans (water and dust proof) sold here on Amazon fit between the rails of this like a glove and with two of them will move approximately 180+ cfm of air through the cooler at stop lights on hot days. Recommend the derale inline temperature fan switch, sold here, as well. Plan on hanging it from the bottom front of frame, from the bolts used for my engine guard, but might side mount it out there toward the side of engine guard itself, with a couple clamps, will see.
5072 Industrial_and_Scientific_5 POS 5.0 The current product picture shows a Honeywell Q313A thermopile with the PG9 adaptor slid on; don't let this fool you into buying a more expensive/generic product. See my added pictures.
Accurate 3D readings of AC Electric fields is considered a tough task, hats off to the Gigahertz Solutions folks for upping the ante.
If you live in the boonies, only have a mom and pop shop, and really really really (did I say really?) need a replacement the same day, then take note that the universal White-Rodgers 3101 Millivolt Generator will work as a Q313A replacement. It IS also the same item that can be purchased under the Ace brand name (ACE 44411 or G01A-534) at a local Ace Hardware Store for $30. However, I do NOT recommend the White-Rodgers/Ace product. Due to needing an immediate replacement over very cold winter months, I have used that thrice on my Grandma's heater. One lasted all winter, the next winter needed replacing twice. The metal on the end of these expanded with heat and I have to take out the whole pilot assembly portion and cut the end of the thermopile off with my dremel to remove it from the pilot assembly. This makes what would of been a 10 minute job a (insert word for a nasty female dog); at least I removed rust at the same time and learned what to do the next time it would not pull out. For the same price, buy this Honeywell one; I have not seen any thermopile metal warping in any of our heaters with the Honeywell. Oh, these generic thermopiles do come with a push-in clip, PG9 adaptor and 7/16" nut -adaptor and nut are both brass.
This is one of those tools, I'd like to sprinkle around ... due to its constant usefulness. I'm trying to figure out a justification for acquiring another one.
When I asked my wife to wash my work cloths separate from our underwear today, she gave me the look.
3993 Industrial_and_Scientific_5 POS 5.0 I've used the product once to seal metal banding that had been bent into a circle and spot welded together. It had separated at the seam and had a slight gap. I applied the J-B Weld and then used plastic zip ties to push the gap together while the J-B Weld cured overnight. I left for two days before taking off the zip ties holding it together. The J-B Weld has held the connection ever since.
25.36 cents per yard and 17-mil thick.
3182 Industrial_and_Scientific_5 POS 5.0 For my "repair kit" while traveling.
4820 Industrial_and_Scientific_5 POS 5.0 i used these grommets to protect 5/16" ID (7/16" OD) beer lines as they pass through the walls of a cooler i've made into a jockey box. the openings on these grommets are just barely large enough to allow the beer line to slide through them, which is great because i wanted the external line length to be adjustable without changing the length of the beer line and affecting the line's resistance level. as the cooler walls are constructed of an inner and outer plastic shell with foam filling in between, i needed to use one grommet on the inside wall and another on the outside wall.
428 Industrial_and_Scientific_5 POS 5.0 Heavy duty! thanks.
> Long straw helps get into hard to reach voids
9203 Industrial_and_Scientific_5 POS 5.0 as ordered - no problems
A dust mask or respirator is also key, as the dust masonry cutting puts off is pretty impressive.
It has an offensive smell when wet, it can be a little difficult to mix, it dries to a very visible dark color, and it takes a long time to set relative to most other adhesives in the home (24 hours+...the 15 hrs is only for very small quantities). So why choose it? It's stronger than most riveting, it has the highest strength bond you will find on any home-use product, the bond can withstand prolonged heat as well as major fluctuations in temp (this last part puts a lot of strain on many bonding agents), and it is very, very durable. Application-wise, you can use JB Weld on most any surface that an epoxy will not damage, and if you prep the area correctly, it will work better than you can imagine. This product is appropriate for some of those so-called "mission critical" applications in which failure of a bonding agent could result in injury or financial loss...it's performance is excellent, as is its longevity and consistency. So it's uses are endless, and it takes over as a general repair tool when a standard glue or fast-set epoxy is not appropriate for whatever reason.
9505 Industrial_and_Scientific_5 NEG 2.0 Cheap, not well built. Tried using the ones with two hook in points that were bent a tiny bit. They broke at the brazed point. Probably would recommend trying to find someone that builds good ones
wanna get a 6 D and put rechargeable D's in there that weight alot get more light time and a nice lil weapon if someone
3941 Industrial_and_Scientific_5 POS 5.0 Useful in a variety of situations where "normal" epoxy would break down due to temperature.
3236 Industrial_and_Scientific_5 POS 5.0 a good product at a fair price,would recommend to a friend. David
2756 Industrial_and_Scientific_5 POS 4.0 I have been running the same cpu on my rendering PC for about 2 years now so I thought it was time to change the thermal compound. I was getting an idle temp of around 37 degrees before I put this stuff on. Now its down to an idle temp of around 24 degrees and doesn't reach over 48 when rendering videos for long periods.
1709 Industrial_and_Scientific_5 POS 4.0 Good price and delivery, but the base plate is a little small compared to the smaller casters on my machine that I will replace with these. I have to make larger base plates first, but I just haven't got around to it. Other than that , they look like very good casters, and I would buy them again.
8803 Industrial_and_Scientific_5 POS 5.0 As always, Small Parts offers good copper wire at a great price. If you're used to heavier wire, 24 gauge seems to mark the transition from sturdy wire to fine wire. Still, 24 gauge beats out thinner gauges for light wrappings over heavier wire. No matter the gauge, I haven't found a better way to buy copper wire than on these affordably priced, large-quantity spools for (shhh!) jewelry-making.
I am constantly using duct tape as extra hands to temporarily hold my project pieces in place for the initial gluing, nailing, stapling, screwing ... or more duct taping. The easy-to-tear and cheaper 5-mil tape is a blessing for this purpose.
2639 Industrial_and_Scientific_5 POS 4.0 Works well. I like the pneumatic tires and the ability to fold compact. That is why I bought it. It is built well.
1625 Industrial_and_Scientific_5 POS 5.0 Another well made product from Shop Fox. Use for light hobby use.
8574 Industrial_and_Scientific_5 POS 5.0 It is the black Cadillac of duct tape. Strong adhesive, strong tape, and the perfect color.
7050 Industrial_and_Scientific_5 POS 5.0 Amazing tubing, stay flexible and is food grade
5880 Industrial_and_Scientific_5 POS 5.0 Best tape for pretty much any job. Sticks to most anything and you can feel fairly confident your repair will hold.
4122 Industrial_and_Scientific_5 POS 4.0 I picked this up through the Amazon warehouse for just above a hundred bucks. It was discounted due to a small bump in the stainless steel surface, that was stated. It was packed well but it was missing a full bracket. Surface is what you would expect for stainless steel, it does collect finger prints. It comes with one shelf that is adjustable but needs to be put down close to floor to make the table stable. 6 inches up at least for food safety. it really could use that second shelf, as even putting the shelf on the legs firmly the table is a bit wobbly, I have it against a kitchen wall for now so its not that big a deal. I do plan on getting the second shelf and the wheel kit so that is going to add twenty five for the shelf and twenty for the wheels.
5958 Industrial_and_Scientific_5 POS 5.0 If this is what you want, this roll is fabulous. I use it to tape the soles of dress shoes to turn them into dance shoes. It works great. I also use it for a lot of projects that could use the superior adhesion power of this type of tape where you don't want a residue after removal. Otherwise, I would be more economical and use duct tape.
3242 Industrial_and_Scientific_5 POS 5.0 My Yamaha EF2400IS 2400 watt generator was having issues starting my 13,000 BTU air conditioner on my travel trailer. The generator is rated at 16.7 amps running, 20 amps maximum. Yamaha specifies this generator to start high efficiency 13,500 BTU air conditioners; my air conditioner is not high efficiency.
3554 Industrial_and_Scientific_5 POS 5.0 I Had no issues with this item.
113 Industrial_and_Scientific_5 POS 4.0 As advertised
761 Industrial_and_Scientific_5 POS 5.0 Like this product.
2888 Industrial_and_Scientific_5 POS 5.0 Very Nice
Never disappointed in any Red Devil* products.
5756 Industrial_and_Scientific_5 POS 5.0 gorilla tape is the strongest duct tape i've come across. i wish it wasn't quite as expensive as it is but it's well-worth the price compared to other brand's tape that don't work as well.
889 Industrial_and_Scientific_5 POS 4.0 Units are not heavy duty and wheels are plastic. That being said I bought these to move a work table around my shop that holds items while I work on things. Wheels are still intact as I have a hard floor. If you have a carpeted surface or one that has debris on it you will experience difficulty moving items around depending on weight load. Units work for what I purchased them for.
1" Curved Pegboard Hooks (count of 4)
8770 Industrial_and_Scientific_5 POS 5.0 Used this to remove my own staples. It worked and didn't hurt. Good value!
Highly recommended!
3549 Industrial_and_Scientific_5 POS 5.0 100%
4850 Industrial_and_Scientific_5 POS 5.0 works as expected.
1746 Industrial_and_Scientific_5 POS 4.0 Nice to have the thicker glue on hand.
3807 Industrial_and_Scientific_5 POS 5.0 Great !!
I have not had any problems with this unit. So far, it has not slipped. The device auto power-off feature works well. This unit also comes with an extra battery. I own four of them.
9351 Industrial_and_Scientific_5 POS 4.0 I would recomond this product to others. I plan on putting them on my stetheoscope at some point of time.
2039 Industrial_and_Scientific_5 POS 4.0 Good quality Fluke test leads. Second best, this is why I give 4 stars. But if you want the best one, then buy Fluke TL-175.
9415 Industrial_and_Scientific_5 POS 4.0 Good quality.
4304 Industrial_and_Scientific_5 POS 4.0 We are using this mirror to guide two cars into twin garage and not causing impact with mower, trash cans, or other car.
I'm going for the spray bottle next time.
7259 Industrial_and_Scientific_5 POS 4.0 I am using this as a printing surface for my 3D printer. I saw the name brand poly printing surfaces and did a bunch of reading and ended up here for $5 instead of there for $15. Overall I am very happy with it. I cut it using a metal straight edge and initially cutting with an XActo knife blad. Then I reversed the blade and scored over and over making sure to cut fairly deeply in the front and reverse sides before trying to bend and snap. I am holding it to my print bed using binder clips and it is working fine. I read where people said they could print PLA with no heated bed but I could not. I tried none, and then low bed temps and always got curling and failure to stick. I went back to the 55C bed temp that I had been using for blue painters tape and it sticks fine. I was worried that I would not be able to get the part off the bed when finished but so far it has been easier than painters tape by far. I haven't tried ABS yet but PLA works great. If you have trouble getting your part to stick just up your bed temp a little and make sure the nozzle is pressing the bead into the surface. if the bead is round the bed is too low. If the bead is flat then probably too high (you don't want the nozzle to hit this surface). If the bead is oval and flattish but not completely flat then it should stick just fine. If you still have issues just clean the surface lightly with alcohol and then dry completely.
4051 Industrial_and_Scientific_5 POS 5.0 I saw this on Amazon one day and I had to have it. The outside box does seem a bit scary so I still have not opened it up. Other than the picture on here I am really not sure what is inside...
7478 Industrial_and_Scientific_5 POS 4.0 handy
For this type of measurement the tool worked well for me. I found that in the case where the shaft was being measured some times the reflective tape provided insufficient contrast and I had to apply a piece of non-reflective tape to act as a background. This is a normal expected characteristic of these devices.
* It expands a *LOT*, use with caution or you might accidently glue your project to the table as it expands overnight! This happend to me :-)
4413 Industrial_and_Scientific_5 POS 4.0 Awesome product for a good price...Will order again!
8081 Industrial_and_Scientific_5 POS 5.0 The bar came in straight, sturdy and at the dimensions described. The shipping package was sturdy, although still a bit beat up. It's a hefty metal rod with pointy corners, so I don't know that there is a great way to package it.
8738 Industrial_and_Scientific_5 POS 5.0 I am glad I put the money down for these. They don't strip and feel very high quality.
If they could improve on one thing, it would be to make the reclaim tank about 20% larger. As-is, you'll fill up the reclaim before you're out of water every single time. That gets you out of sync because sometimes you'll empty it and not add more water. I have yet to find a machine that doesn't have this minor problem so I'm not inclined to complain too loudly.
1013 Industrial_and_Scientific_5 POS 5.0 Great product
Examples are endless. In addition to the examples below, I've used it to repair ceramic plant pots and shoes. I also use it to seal rust spots on my dishwasher rack. The Goop it also makes a "cushioned" surface that will prevent scratches to dishes. I use Goop to close small holes in window screens. I've used Goop to seal holes in air-mattresses.
2770 Industrial_and_Scientific_5 POS 5.0 Arctic Silver has been very nice to use since they started. Easy to dispense and it works. I'm not going to get into dramatic calculations of how this item works or how much to put on, read the directions.
My advice to anyone who may purchase this item or just did is to:
9792 Industrial_and_Scientific_5 POS 5.0 Exceeds my expectations!
5821 Industrial_and_Scientific_5 POS 5.0 Like nails... on a roll!
9086 Industrial_and_Scientific_5 POS 5.0 As advertised, received promptly. Very satisfied.
8921 Industrial_and_Scientific_5 NEG 2.0 The piece is well cut, square corners and undamaged, HOWEVER, it was NOT 12" x 24" : It was a bit smaller. Also, it was bowed. The bow was about 3/4" in the center of it's long axis. I will still use it, but THIS COMPANY NEEDS TO TELL THE TRUTH: if it's less than 12" x 24" SAY SO!
2' 15mG
6061 Industrial_and_Scientific_5 POS 4.0 What more is there to say, really? It's food grade tubing great for use in making beer or wine. Nothing more or less.
2189 Industrial_and_Scientific_5 POS 5.0 These hemos are good for many purposes. Tackle box, first aid kit, crafting and many others. Very well made and easy to handle.
2447 Industrial_and_Scientific_5 POS 5.0 Works as advertised and will lift almost anything I will ever want to move.
Friendly tip, apply using an expired credit card, or hotel key. Any kind of card works great for applying an even coating without taking much with it. Also works for scraping off the old before cleaning.
3786 Industrial_and_Scientific_5 POS 5.0 I can't remember why I got this but it's J-B Weld and the stuff works!
These came free of rust or dirt, and there were almost no machining marks on them. You should add a drop of lubricant on the hinge every six months or so; more if you use them frequently.
4941 Industrial_and_Scientific_5 POS 5.0 Suitable for my needs, I would purchase it again.
8910 Industrial_and_Scientific_5 POS 5.0 Good product. It can be cut with a table, jig or a circular saw for making jigs and slides.
8708 Industrial_and_Scientific_5 POS 5.0 Great stethoscope, and the totally black version looks very cool. It works for my purposes just as well as my Littman, and I don't have to worry about losing a lot of money if I ever have to replace it. One of the docs at work continually "forgets" a stethoscope (how does that happen?) and always asks to use mine over the cheap ones the hospital provides. I'm not really into communal use of anything, so I must always decline. I love it and use it daily!
8735 Industrial_and_Scientific_5 POS 5.0 These Spax fasteners work great! I have become a believer in these things for use in my woodwork. I won't use anything else.
1950 Industrial_and_Scientific_5 POS 5.0 I really like this tape for various uses. It really sticks good and stays too. Pretty tough as well. Like how it's reinforced with strands of nylon.
9549 Industrial_and_Scientific_5 POS 5.0 I work a lot with acrylics and other plastics and require a lot of different adhesives to keep my projects moving. Weld-On provides me with a lot of them but in industrial quantities. Up till now I have been ordering these from the West Coast and a couple of weeks later this package with HAZMAT warnings all over it would appear at my door. After all of this I'd be forking over $30.00 bucks or more.
You need to have the tool close to center for balance and your upper hand can balance the sheet.
8332 Industrial_and_Scientific_5 POS 5.0 This is exactly what I needed and the item was shipped quickly and packed very well. I would definitely recommend it.
These are not cheap for household users, but a package used strategically could last a very long time and help in cleaning surfaces that might otherwise represent a challenge in cleaning. I highly recommend this in cleaning those more difficult smudges you see on TVs, marble surfaces, glass, computer screens, and the like.
5495 Industrial_and_Scientific_5 POS 5.0 Very good
Capri Tools 6-Inch Digital Caliper with Fractional Display/MM/SAE & Extra Large LED Screen
4130 Industrial_and_Scientific_5 POS 5.0 First I assembled the cart--took 10 minutes. Super easy!! Then I placed my microwave on it and it is Wonderful. Very sturdy, rolls very easily (over saltillo tile floors. I wasn't really sold on the middle drawer but i love it. It slides out very easily and holds a lot. The cart is very sleek and nice looking and I really like the open shelves---hard to see the dust collecting on them. And you have the option of casters or just feet. And the height is great for a microwave on top. I am REALLY happy I purchased it.
5659 Industrial_and_Scientific_5 POS 5.0 Great white lithium grease! Very useful and the CRC brand makes a quality product. Some of the things I use it on are the garage door metal hinges and car hinges. Works great where there is metal to metal contact and has silenced annoying squeals.
bit. Also note, most step bits will require a little deburring of holes,
Pegboard Pliers Holder (count of 3)
2631 Industrial_and_Scientific_5 POS 5.0 this is a great multicart! Probably the best you can easily store it in a compact car's trunk and if you don't have anything else you could fit it in a vert one as well.
9181 Industrial_and_Scientific_5 POS 5.0 I discovered these little gems on a youtube video and knew I had to try them out for the garage wiring project I am doing. Sure enough they are so much easier to use than regular wire nuts. Lift the lever, insert the stripped wire, drop the lever and click is closed, done. It allowed me to have my wire shorter and way cleaner than I normally can do it. No cramped in a tiny box with too long of wires and then having to shove that all back into the box. Easy peasy!
1850 Industrial_and_Scientific_5 POS 4.0 Love my Kreg Jig system but I wish they offered a version in a star drive. The square drive has a tendency to slip more than the star drives, especially when working at odd angles.
8304 Industrial_and_Scientific_5 POS 4.0 Quality product from this seller. Precision cut exactly to measurements. Fast shipping and come safely packaged in a sturdy thick walled tube with sealed plastic caps. Highly recommend this seller.
6459 Industrial_and_Scientific_5 POS 5.0 Works great, highly recommend if you looking for a great tool for a great price
9838 Industrial_and_Scientific_5 POS 5.0 NIP & great delivwery
3447 Industrial_and_Scientific_5 POS 4.0 These are fun in a off-road machine.
One review claimed that these bits cut in two directions. To test this I tried making holes in hardwood by running my drill in reverse. It worked poorly, cutting action much slower and the quality of the hole was not as good as running the bit in a normal (clockwise) direction.
98 Industrial_and_Scientific_5 POS 5.0 Good price on a good blade.
38 Industrial_and_Scientific_5 POS 4.0 Works
7486 Industrial_and_Scientific_5 POS 5.0 Works good! You will have to start a pilot hole. I would not use this with anything heavier than sheet metal.
3487 Industrial_and_Scientific_5 POS 5.0 These bandage scissors are perfect for what I need them for, which is to use in my job as a treatment nurse. They are petite compared to many bandage scissors, and a bit lightweight, but very sharp. They cut through gauze easily. The colored handles are wonderful, because I always know where they are!
Will be buying again as my skills improve.
7614 Industrial_and_Scientific_5 POS 5.0 I can't believe how strong these are. A bit pricey but well worth it if you don't want to lose a load on the highway.
4684 Industrial_and_Scientific_5 POS 5.0 This is an excellent quality double pulley, weight limit 400 pounds. I used two of these for a 4:1 force reduction pulley system to hold a heavy bicycle on a garage ceiling hoist.
755 Industrial_and_Scientific_5 POS 5.0 Purchased this switch for a guitar tube amp I built, perfect.
5654 Industrial_and_Scientific_5 POS 4.0 This has been a very good stethoscope, it appears very well built, nice materials and of good design, also comfortable.
Fair price.
1751 Industrial_and_Scientific_5 POS 5.0 Works like a breeze. I have a one man shop, as a lot of us do. Like they say, one end clamp on your vacuum hose and the other end hooks on to your tool. Very simple and easy to use. Have not had any trouble with connector slipping off tool, like a few have stated.
5037 Industrial_and_Scientific_5 POS 4.0 It's brass and it fit. A win win when using gas. Because you don't want sparks or leaks.
2341 Industrial_and_Scientific_5 POS 5.0 For bulk reloading, this stuff is great.
3642 Industrial_and_Scientific_5 POS 5.0 This is a very clean hose with no bad taste or smell, which is easy to flex and contains a good sized washer. Because the female end is plastic and I wanted to make a positive seal without excessive torque, I decided to use Dow 111 Food Grade Oring Sealant.
Six months later and this is still my go-to machine for rugs and carpeting. It's still working perfectly with no issues at all. I have used it heavily the last 6 months (since I now have the geriatric dog) and it keeps my house from smelling like a kennel. I am completely spoiled with the ease of cleaning the machine after use.
4323 Industrial_and_Scientific_5 POS 4.0 This unit eats less power than our old one - and, delivers more power to the cavity.
4370 Industrial_and_Scientific_5 POS 4.0 good
9044 Industrial_and_Scientific_5 POS 5.0 They work
9582 Industrial_and_Scientific_5 POS 5.0 Great for getting into tight places or probing small points of contact. Easy to slip on and off of probe ends. Be careful when using these they are quite sharp and make very nice but small holes in fingers or hand.
5439 Industrial_and_Scientific_5 POS 5.0 Nice looking feels sturdy and works great
2837 Industrial_and_Scientific_5 POS 5.0 Because it is the best. And when what you are working on costs hundreds to possibly thousands of dollars, why try to save a couple of bucks? It is like trying to save a buck on dessert after doling out $100 for dinner at a restaurant. Well, not quite, but you get the idea.
835 Industrial_and_Scientific_5 POS 5.0 This a great value for the price, especially when compared to those with the flexible spout (Type II). If you need to fill side opening tanks (e.g.; cars and trucks), you may be better served by a Type II can (I love my Eagle Type II) because with this one you will typically have to put the funnel into the tank opening and then pour into the funnel. Type I cans, like this one, don't have a second opening so the thing is going to go glug-glug-glug and possibly splash a little unless you pour very carefully. Type II cans have a second opening (for filling) that is partly opened when you operate the valve, allowing for a smooth and fast flow through the spout.
1429 Industrial_and_Scientific_5 POS 5.0 Finally, the right size for our tape gun! It is so hard to figure out which tape is large enough.
Machinability 20% of free-cutting brass rod (C360)
4399 Industrial_and_Scientific_5 POS 5.0 After my son got stuck in his car, and realizing I could have pulled him out in less than a minute if I had a rope with my SUV (took us 1/2 hour with a shovel), I ordered this. It looks well made, has a nice case. If I'm lucky, I will never need it, now that I have it!
2985 Industrial_and_Scientific_5 POS 5.0 great
9896 Industrial_and_Scientific_5 POS 5.0 At first, this stuff seems just like regular duct tape. The finish, the thickness, the texture--all seem familiar. But it's subtly different, and the difference is everything.
9292 Industrial_and_Scientific_5 POS 5.0 as described = good assortment
Second thing you need to know. The box states the bike fits children between 25" and 38" tall. My daughter is two years + 3 months old and is tall for her age at 36". I had to put the seat at it shortest setting and she just reaches the pedals enough to pedal all the way around. The box also states, "Ages 3 and up". I haven't seen many 25" tall kids that were even two years old so be forewarned if your child is under 35" tall the "trike" will be way to big.
2445 Industrial_and_Scientific_5 POS 4.0 Works fine. A LOT shorter than I expected. If I would have read the dimensions I would have known better. But its a quality little jack.
VIP AUTO NYC
7948 Industrial_and_Scientific_5 POS 5.0 Aluminum rods at a reasonable price
I would like a longer version of this hook too. But these should hold quite a bit of weight and really just great hooks themselves all the way around. Very handy in garages and storage sheds if they have open beams made with two by fours. Just make sure your beams aren't so old that they predate the newer measurements. Or be prepared to hack out a few notches. The metal is too firm to try to rebend to fit anything but what it is. Also two together could hold a bike up or even one a wheel on a bike off the floor for winter storage. The width of the metal is solid and good to help prevent cutting into a hose or many items you might want to hang from them. But slip a section of hose over the hook end and that would help also if you are worried about that.
3865 Industrial_and_Scientific_5 POS 5.0 Legendary product works as advertised. Has saved the day many times.
3128 Industrial_and_Scientific_5 POS 5.0 Rebuilt a Volvo 850 5-Cyl engine using this stuff. It's a thick gel that almost seems like it has gone bad, LOL!
2139 Industrial_and_Scientific_5 NEG 2.0 I'm kind of surprised these got such high star ratings. For the utility, these are going to work for me just fine. The fit and finish is what has me struggling to even give these a 2 star rating. Some pits from rust, hammer marks, polish is very poor, teeth on self locking mechanism are uneven and jagged, hinge area is sloppily constructed, and it's not really straight either. The teeth at the end don't fit snugly together because of the uneven thickness of the metal so there about a 1mm gap in some areas of the teeth. These look as if a high school student made them in metalshop. Mine have a stamp on them saying Pakistan so I assume that's where they are made.
3855 Industrial_and_Scientific_5 POS 5.0 Fantastic product! Used this to reinforce diamond plate by using a stainless steel strap. In order to fill the voids between the strap and the diamond plate I used this. When it hardened it was solid. I then drilled it and bolted them together. It does a great job!
works well so far.
Recommended!
8558 Industrial_and_Scientific_5 POS 5.0 Smack a 2x4 into a couple studs and start hanging! The possibilities are endless with these, get creative! Hang: weed eaters, leaf blowers, molding, chairs, bikes, pole sanders, snow shovels, push brooms, step stools, extension cords!! Laugh that weight limit out of the building!
4380 Industrial_and_Scientific_5 POS 5.0 Used this to seal the seams of my shower. Has worked great. An excellent value for the price.
2295 Industrial_and_Scientific_5 POS 5.0 It is not the biggest size. It is a bit smaller than my other tubs like this one. We use them for mixing meat for sausage. This size fits in my refrigerator better.
6620 Industrial_and_Scientific_5 POS 5.0 This by far is my favorite oil for keeping my mill looking like new.
8283 Industrial_and_Scientific_5 POS 5.0 Its aluminum, its round, and it has the strength I need for an extension on my control stick for my gyroplane, I layered the 1" control stick with an inside and an outside tubing to get the strength and extra length needed on the control stick.
5572 Industrial_and_Scientific_5 POS 5.0 was as expected
5405 Industrial_and_Scientific_5 POS 5.0 I for one can't figure out how 52% give this product a rating of 5 and 30% give it a 1. Lots of possibilities come to mind, from user issues (as in following directions), and perhaps other things that we know happen in reviews. For whatever it might be worth, here is my experience. I am framing a large bathroom mirror, and it required that a 1/2" x 1 3/4" strip be attached to the back of a 2 1/2" trim piece. I'm using the pre-painted wood that you can get at Home Depot. I had to run a 5/8" x 5/8" piece of wood all around the mirror to have a place to attach the trim piece and to work around the clips that hold the mirror to the wall. The trim piece is too thin for attaching to the strip with nails or screws, so I opted for this product. I ran two small beads (about 1" apart) around the trim piece and held the two pieces together with strategically placed clamps. Out of curiosity, and despite the instructions that specify how long the glue takes to set and dry, after about 45 minutes, I removed one of the clamps at one end and (without going crazy), tried to lift or move the strip from the trim piece. Didn't budge! I let the pieces set over night before removing the clamps. With greater force, I attempted to separate two of the pieces. Impossible. So, in terms of wood to wood, using a very modest amount of the glue,and applying well-placed clamps, Liquid Nails LN700 works like a charm. And despite what some say, it does dry! Take the 1's with the proverbial grain of salt, read and follow the instructions, and assuming wood to wood, you will be delighted.
Stored it in a cool dark closet.
For example, you can use small quantities your teenager's shoes to detect when they try to sneak out at night. Just put a detector by the doors and windows and an audible beeper in your bedroom. End of problem!
860 Industrial_and_Scientific_5 POS 5.0 AWESOME..... I threw this in my die grinder and cleaned up rust with ease.
A winner.
9191 Industrial_and_Scientific_5 POS 5.0 I use these connectors all the time.
4042 Industrial_and_Scientific_5 POS 5.0 After installing this material on numerous coax joints it performs as advertised and I am sure will provide the protection it is designed to.
7983 Industrial_and_Scientific_5 POS 4.0 A solid choice, excellent depth, smooth finish. Hints of Manganese and Copper. I'd give it 98 points of Aluminum. Fully aged, ready to go today!
7086 Industrial_and_Scientific_5 POS 5.0 Very accurate rods.
9445 Industrial_and_Scientific_5 POS 5.0 First off, the fit for these on the 1/4" pegboard is ok, not great. The smaller hooks like to fall out when removing tools or whatever is hanging unless you use the black plastic straps to secure them. That being said, this is a great assortment if you're just trying to organize a bunch of stuff and don't have any set needs. For the price, you can't complain, and I'm sure this set works awesome on the 1/8" pegboard.
1583 Industrial_and_Scientific_5 POS 5.0 Good product that ships fast. Decent price. Not cheaper than my local hardware store, but worth the cost since it saved me an unnecessary trip.
2599 Industrial_and_Scientific_5 POS 5.0 This stuff is great, but the curing time is long.
685 Industrial_and_Scientific_5 POS 5.0 Excellent high-grade electrical tape.
WHO - World Health Organization International EMF Project
Bought it for a prototype of a n enema, so you get the idea.
4756 Industrial_and_Scientific_5 POS 4.0 works great
5403 Industrial_and_Scientific_5 POS 5.0 An excellent product. Seems to stick everything together well, and cures in a reasonable time.
509 Industrial_and_Scientific_5 POS 5.0 Always a handy drill to have around.
607 Industrial_and_Scientific_5 POS 5.0 Electrical tape is a must in active households. For example, after running over my vacuum's cord one time too many, I repaired the cord instead of paying $30-plus dollars for a replacement. With safety in mind, I know I can trust the 3M Scotch brand -- besides which, this electrical tape saves real money! Recommended.
1014 Industrial_and_Scientific_5 POS 5.0 Sturdy , non jamming and nice assortmant
- Easy to open battery compartment
2948 Industrial_and_Scientific_5 POS 5.0 i love this product so much , and i will be considering in the future to buy more of it
108 Industrial_and_Scientific_5 POS 4.0 Exactly what I needed. Well Packaged and as described.
5374 Industrial_and_Scientific_5 POS 4.0 Brass fitting, it is the size ordered.
1118 Industrial_and_Scientific_5 POS 5.0 Does what it is supposed to do
2642 Industrial_and_Scientific_5 POS 5.0 My favorite cart. No flat tires. Large wheels all around make it way easier to roll over thresholds. We load these with a lot of equipment and they take it just fine. I have 3 of these and will be getting more of this same model.
Edit: Absolutely PERFECT for doing the eye sockets on reborn vinyl doll molds. Super sharp # 11 blade with sturdy handle. One blade is still going strong- just have to be very careful when handling it.
Moving car:
4900 Industrial_and_Scientific_5 POS 5.0 Loctite Epoxy Repair Putty Stick is a must have in my workshop. This stuff is awesome. It's like steel when it dries. I've yet found its limitations.
2558 Industrial_and_Scientific_5 POS 5.0 An excellent epoxy. Extremely hard wearing.
9602 Industrial_and_Scientific_5 POS 5.0 This accessory facilitates measurements in difficult to access places. I recommend ...
6546 Industrial_and_Scientific_5 POS 5.0 I LIKE THE ACCURACY AFTER I CHECKED WITH PRECISION BLOCKS / I LIKE THE LARGE DISPLAY FOR EASY READING IN THE SHOP OR TIGHT SITUATIONS / IT HAD A NICE CASE FOR IMPACT IF DROPPED AND EVEN AN EXTRA BATTERY.
- U.S. AC Power natural harmonics = 120Hz, 180Hz, 240Hz, 300Hz, 360Hz.. up to 800Hz for most.
-None
105 Industrial_and_Scientific_5 POS 5.0 Rips easily (a good thing in my case) and lasts through the job. I used this to sand down some wooden bedroom furniture to prepare it for painting. I think it did a wonderful job
7826 Industrial_and_Scientific_5 POS 5.0 great rod for making brackets and easy to thread and bend and non magnetic for mounting a compass to on a phantom drone.
Try this test yourself if you have any doubts.
8505 Industrial_and_Scientific_5 POS 5.0 This is very good quality hosing. It is the same stuff you will find in Home Depot or Lowe's. I am very happy with the purchase. And I would recommend this to a friend.
2760 Industrial_and_Scientific_5 POS 5.0 What can I say, this thermal compound goes into every PC build I produce. I've used many different brands over the years, but I always come back to Arctic Silver. Highly recommended
9095 Industrial_and_Scientific_5 POS 5.0 WD40 has always been great, but I especially like the new sprayer design where you don't have to keep track of that damn red straw
3956 Industrial_and_Scientific_5 POS 4.0 bonds great I like this stuff
3795 Industrial_and_Scientific_5 POS 5.0 Weld bonds quickly and is very durable. Product takes a lot less time to dry than most other bonding agents out there.
6184 Industrial_and_Scientific_5 POS 5.0 What can I say, they worked extremely well for my car audio installation. Be sure to get a quality crimper, however, as it really makes a difference.
1814 Industrial_and_Scientific_5 POS 5.0 They are OEM screws, work very well. Not much more to add.
* You must read the directions!
The main reason I'm writing this review though is because of Amazon. I ordered a bottle and during transport the cap became loose/leaked and you can imagine the gooey mess...fortunately it was all contained in the box and this was the only item in there. A quick chat with the Amazon folks and had a new bottle straight away.
The 4 bits in this set are labelled Irwin Unibit 1, 2, 4 and 21. The three smaller bits are self starting, and the forth is for enlarging. All these bits can be purchased individually here on amazon.com.
843 Industrial_and_Scientific_5 POS 5.0 Great gas can. I just got it and it appears to be very well made. It has a heavy duty plastic handle to pull open the spigot. I've noticed others have complained about this... and I am quite surprised. The handle plastic doesn't flex at all when I open the spigot, it is a very thick plastic handle, sized correctly for the job it has to do.
7932 Industrial_and_Scientific_5 POS 5.0 This is quality thick-wall tubing. It was shipped promptly and packaged well. Not much else to say beyond that. It was made into a very effective mounting system for my solar system.
9656 Industrial_and_Scientific_5 POS 5.0 These work great for a disconnect for solar panel to grid tie.
9757 Industrial_and_Scientific_5 POS 5.0 Great
5453 Industrial_and_Scientific_5 POS 5.0 Great stuff. Don't spill. It will stain your items.
337 Industrial_and_Scientific_5 POS 5.0 This is an excellent accessory kit. I upgraded to the 2.5" hose and attachments because my small hose would get clogged every easily. Now with the bigger hose nothing gets clogged anymore. I'm surprised at the increased amount of suction I'm getting with the bigger hose. You have to be careful not to suck up your tools because they will easily fit down the hose. If you have a powerful shop vac that is still using the 1 1/4" hose, you are missing out on a lot of power.
2450 Industrial_and_Scientific_5 POS 5.0 I am restoring a 1977 Winnebago Minnie Winnie RV. It didn't have a jack, so I ordered this one. I have used it a couple of times as I have worked on the rig, and it is smooth and powerful. You don't get a lot of lifting range with a hydraulic jack, but they sure work well otherwise. Good product at a reasonable price.
Having said that, this is a great material to work with. It cuts very easy and fairly clean. The material does not melt when using a power saw. Holes drill very clean. If you will be screwing into this, make sure to pre-drill with the right sized drill bit.
Still, ya asked it to make hot water - and it does - just be aware that adding instant coffee, sugar, artificial sweetener, or creamer will probably cause a boil over.
2974 Industrial_and_Scientific_5 POS 5.0 Cant go wrong using a DeWalt branded finish nail. Use them in my DeWalt nailer and with the price being what it is I see no reason to go with a off brand even though they may be just as good. Why take the risk for little or no savings.
8375 Industrial_and_Scientific_5 POS 5.0 I do cut small brass gears for my model trains, its hard brass but very easy to machine, I do also cut mini washers from this stock, works perfect.
9947 Industrial_and_Scientific_5 POS 5.0 As described.
8548 Industrial_and_Scientific_5 POS 5.0 this tank is very well made and should hold up well. I'm using this for a spring watering trough. recommend to others
2384 Industrial_and_Scientific_5 POS 5.0 I bought this based on the average review from so many reviewers. I've used it only once, since I got it about an hour ago. I vacuumed two area rugs that I had been vacuuming for weeks with a hand vac. I couldn't believe how much cat fur and dust this vacuum picked up. It was just funny. I hope it keeps working. The rugs look so nice.
1788 Industrial_and_Scientific_5 POS 5.0 100%
8898 Industrial_and_Scientific_5 POS 4.0 I had to return the first one because of a major bow and it being far from flat. I received the second one which has a ever so slight bow but nothing I can't work with. Also, the second one is also much much smoother than the first. Go figure! I was a bit frustrated at wondering how the defective item could've been shipped in the first place not to mention I was concerned about what the condition of the second one would be. I must say the return policy is seamless. I want online, printed a return label and I received a new item the same day I shipped the old one back. The return couldn't have been any easier. Its because of the seamless return/exchange that I give it four stars.
Be careful when pressing the pump as it can release an ample amount of spray.
3461 Industrial_and_Scientific_5 POS 5.0 A must for any High-Lift jack owner.
8982 Industrial_and_Scientific_5 POS 4.0 Nails are well formed work well and don't jam gun if you need 2' 18 ga brad nails buy these nuff said
3057 Industrial_and_Scientific_5 POS 5.0 good product
376 Industrial_and_Scientific_5 POS 5.0 Work great
5699 Industrial_and_Scientific_5 POS 5.0 This a good deal and fast.
3171 Industrial_and_Scientific_5 POS 5.0 I've been using this Permatex 80050 silicone for many years now for obvious reasons. It's awesome stuff. It works on and adheres to anything you'll ever need it to. All the weather elements in Texas is no challenge to it. I can find nothing negative about this silicone. The longest I've ever stored a used tube is about a year and other than at the tip it's still good to go. Very happy with it and will continue to purchase.
~ There is a gap between the internal measuring jaws which makes all internal measurements inaccurate. Watch my Youtube video showing this gap visually.
In hardwoods, I found step drills to be a quick and effective way to remove the ragged edges and slivers on the back sides of freshly drilled holes. You do need a light touch, and a bit of practice to obtain consistent results.
1763 Industrial_and_Scientific_5 POS 5.0 Simply the best. Just watch your fingers.
2621 Industrial_and_Scientific_5 POS 5.0 Slip-slip bulk head works as advertised. I'm using this as a drain for an overflow and the smaller 2.5" flange diameter is perfect. For glass installation I would recommend a bulkhead with the wider 2.75" diameter.
6807 Industrial_and_Scientific_5 POS 4.0 I bought this assuming it was an RJ-11 / RJ-12 6P6C connector. This has an RJ-45 8C on both ends. Is the exact same footprint as the 8 wire fluke model, except it only has 6 copper contacts to connect your but set to. The just remove 2 contacts from this 6 wire model. I returned and upgraded to the 8 wire model. Just seems silly or a waste to have a 6 copper contact for an RJ-45 jack. I would have been happy with this one, if it came with an RJ-45 8C to RJ-12 6C K plug. But it comes with RJ45 K plug on both ends. Hope this helps someone.
158 Industrial_and_Scientific_5 POS 5.0 exactly what was needed
but now that its installed it works just fine
- It's not easy hammering in nails overhead, and I had to take several breaks. Maybe a staple gun would work better, although I'm not sure how well they would stand up to seasonal changes compared to the roofing nails that come with the garage door seal.
5004 Industrial_and_Scientific_5 POS 5.0 It worked for what I was doing...
2803 Industrial_and_Scientific_5 POS 5.0 Bought Arctic Silver 5 a few years ago. This new and improved version is in a much easier to use dispenser; doesn't drip and drag as much, and has definitely decreased average temp on 3 of my PC's. Would highly recommend!
380 Industrial_and_Scientific_5 POS 5.0 Well, this is aggressive. I thought I would take some UCoatIt epoxy off the floor, and not only did it do that, but it actually removed the concrete in BIG chunks.
1089 Industrial_and_Scientific_5 POS 4.0 As described...
time.
6182 Industrial_and_Scientific_5 POS 5.0 good any any made. would buy again. use lots because of the insulation
6265 Industrial_and_Scientific_5 POS 5.0 Bought this to have at home for when I need to make sure the power is really off. saved me a few times from getting a nice "tickle"
5242 Industrial_and_Scientific_5 POS 4.0 Makes a good seal but make sure that your pipes are clean and that your two ends line up correctly to get the best seal from this coupling. Fernco is great because they have just about *every* coupling for any application!
As for installation, this does take A LOT of work to do it right but it's well worth it. First have someone help!! Follow the directions, etch the concrete and take your time and keep that helper happy and close by, give them a brush or roller and make them help cut in the edges! Did I mention have someone help you? The pot life of the product sounds long enough but if your trying to do it right the pot life ends up shorter than you think and your gonna wish you had asked someone to help, so get some help!
This product worked great, easy applied, easy clean up.
3888 Industrial_and_Scientific_5 POS 5.0 Very strong steel reinforced epoxy
For the price, this seems like a very decent device, unless low resistance accuracy is important to you. I personally think I'm going to drill a hole in the faceplate and add another terminal, with a 0.77 ohm (or 1 ohm adjustable) resistor to an existing terminal or maybe just buy a 0.75 ohm resistor like CLAROSTAT RW70UR750F RESISTOR .75 OHM 1 WATT 1% TOL. (Per Piece) (or six 4.7 ohm in parallel=0.78 ohm) and connect it in series when I care about low range accuracy, and know 1 ohm is the minimum resistance. Normal DVM's can't accurately measure much below 1 ohm anyway, so perhaps owning a meter than can measure in this range influences my expectation that 1 ohm at 1% should measure in the range 0.99/1.01, and on this device it measure 1.23 ohms.
2. Different sizes.
5501 Industrial_and_Scientific_5 POS 5.0 Well made connector. Holds good on connector. Had originally ordered install bay brand but had to return because of loose fit.
Brass is strong enough for most home uses - obviously for automotive or aircraft use stainless steel is required.
2233 Industrial_and_Scientific_5 POS 5.0 Works.
The rod comes rough-cut at both ends. I simply touched it up with a Dremmel tool and it's ready to go. The other benefit of an aluminum rod is that it can be used to tap parts without marking them, if done carefully. This is a good all-purpose tool helper to keep around. It weighs almost nothing and can be kept in the range bag or tool box.
2. Will last for years.
Pros
Very high quality
3770 Industrial_and_Scientific_5 POS 5.0 These have been around for a long time. No batteries, no buzzers, no flashing lights. no high price. They just work, and they work quite well.
4619 Industrial_and_Scientific_5 POS 5.0 I am very pleased with the light output from this bright LED light even though it is somewhat expensive. Even with weak D cell batteries, the light output is far superior to the original incandescent lamp with new batteries. Installation was simple taking only a minute or two of time. And I still have the original lamp as backup. I especially like the white light compared to the yellowish original lamp light.
1847 Industrial_and_Scientific_5 POS 5.0 Good high quality screws that perform their purpose adequately. Not much else to say.
494 Industrial_and_Scientific_5 POS 5.0 great
2323 Industrial_and_Scientific_5 POS 5.0 good
Setting the voltage and current on the unit is easy and the display and settings are accurate and I show that in my video using a Fluke Multimeter. The displays on the power supply are bright and easy to read. The red numbers are for the current and the green numbers are for the voltage. Just remember that when you have the unit in the serial or parallel mode that the master channel controls the voltage and the current.
8282 Industrial_and_Scientific_5 POS 4.0 This is a fairly thin walled aluminum tubing - exactly as described. the 6061-T6 is a harder, stronger alloy of aluminum than pure aluminum . But it is still light weight and relatively easy to work.
3680 Industrial_and_Scientific_5 POS 4.0 I use this hose for the connection for my RV at home so I don't have to connect and disconnect it many times a year. I'm not sure how sturdy the connectors are so I decided to make it the home connection instead of the travel hose but it's a good quality hose and doesn't impart any taste to the water that I could tell.
- AC Power for home/business (much of Europe) = 50Hz
5918 Industrial_and_Scientific_5 POS 5.0 All good!! I'm happy with what I got..... Not exactly cedar but I think it's a new better product... They call it something else but still smells a bit like cedar.
6564 Industrial_and_Scientific_5 POS 5.0 This caliper works like a charm. It always returns to zero, the display is nice and large. Comes with extra battery and battery holder in the case.
6471 Industrial_and_Scientific_5 POS 5.0 Even comes with a case and an extra battery. Nice buy.
For what it's worth, it cuts fine on the table saw, on the router table, on the jointer, etc. Just don't let it burn (obviously) - other than that, it's a snap to machine into whatever you need it for around the shop.
This might prevent the loss of the pump in the presence of a mechanic that is unaware of the condition.
6361 Industrial_and_Scientific_5 POS 5.0 This is a really nice caliper. It's accurate and easy to use. It comes in a great case with an extra battery. I have no complaints at all.
5499 Industrial_and_Scientific_5 POS 4.0 Works as expected.
1789 Industrial_and_Scientific_5 POS 5.0 actually a very well made product, pricing is excellent
Oh, yes. If you need to hold something i place, you need this. You will not be disappointed. I will forever keep this in my bag of tricks.
211 Industrial_and_Scientific_5 POS 5.0 i give this 5 star .. about my self i need this part to use it in car or windows or sofa
6435 Industrial_and_Scientific_5 POS 5.0 Worth every penny.
230 Industrial_and_Scientific_5 POS 5.0 These work fantastic for sanding drywall!
4899 Industrial_and_Scientific_5 POS 5.0 good product
3618 Industrial_and_Scientific_5 POS 5.0 I used this to seal up bins with winter clothing/accessories, and put them in the garage. We had used duct tape last year, and within a couple of weeks, it had unsealed, and the bin lid popped off, allowing dirt into the bins. This has held over the last month, and looks as if it will continue to hold. The bins are the standard rubbermaid bin. I will update this review towards the middle of the summer as temperatures heat up.
6320 Industrial_and_Scientific_5 POS 5.0 It's much much much easier to read from my old one which I've had since 1970s. I actually bought the first digital one and it cost me $150.00 !!! and this one performs the same !!!
1247 Industrial_and_Scientific_5 POS 5.0 These B&C Eagle 2-3/8-Inch nails are decently made and worked perfectly with my porter cable FR350 framing nailer. I didn't have any issues with jams or hang ups in the nail chute. The nails are full round head and hot dipped galvanized and worked fine for a couple small outdoor projects I had. I didn't need a lot of this size nail, so the 500-count box was just the right amount for my needs.
8214 Industrial_and_Scientific_5 POS 5.0 Delivered as described, well packaged and good quality. Would buy it again as needed.
We purchased a number of these items based on the seemingly positive reviews it has. Unfortunately, they were constructed with poor quality materials and rather shoddily put together. I wish we had an option of not buying poorly made Chinese made products or products other countries who don't really have our interests in mind other than to sell thing to us. Unfortunately we'll be returning these items in search of a better quality product state side. Shame.
6239 Industrial_and_Scientific_5 POS 5.0 THE BEST VOLTAGE CHECKER
7588 Industrial_and_Scientific_5 POS 5.0 Heavy duty, the big dog!
5293 Industrial_and_Scientific_5 POS 5.0 Good product, as advertised...
8370 Industrial_and_Scientific_5 POS 5.0 Brass rod just like you would expect. It appears to be something like "half hard" meaning it's fairly stiff and a little springy. It comes with a smooth but not polished surface. It will take a good finish.
3694 Industrial_and_Scientific_5 POS 5.0 Nice freshwater hose. No complaints.
5462 Industrial_and_Scientific_5 POS 5.0 Excellent.
8470 Industrial_and_Scientific_5 POS 5.0 I used this after prepping earlier with Metal Blast. It went on nicely with a cheap paint brush and left a nice silver color. A body shop owner recommended it.
2847 Industrial_and_Scientific_5 POS 5.0 Functional, with accurate sizing. Simply made and strong.
7918 Industrial_and_Scientific_5 NEG 2.0 Inaccurate O.D. 1/32" to large. Had to return.
I highly recommend this product in whatever color you choose, it's just great stuff!
9064 Industrial_and_Scientific_5 POS 5.0 Works great.
3971 Industrial_and_Scientific_5 POS 5.0 Gotta love this stuff. You can fix pretty much anything with it. I had a standing cigar ashtray I got on a great sale (like 75% off) and saved over 100 bucks on.
Q313A 1188 / 35" / Nut or Clip & Spade Terminal / Push-In Clip, 1/2" Attaching Nut
2290 Industrial_and_Scientific_5 POS 4.0 Works ok, maybe a step down from the 2 part jb weld.
7174 Industrial_and_Scientific_5 POS 5.0 will not kink like thinner hose, holds up OK.
1' 3mG
The Aluminum rods were perfect for our project.
7234 Industrial_and_Scientific_5 POS 5.0 As described
758 Industrial_and_Scientific_5 POS 4.0 good
It's easy enough to figure out.
2291 Industrial_and_Scientific_5 POS 4.0 Pros:
2565 Industrial_and_Scientific_5 POS 5.0 I have used epoxy products for years. They are usually expensive and come in very small amounts. These bottles are large and should last me the rest of my life.
1/2" Curved Pegboard Hooks (count of 6)
3172 Industrial_and_Scientific_5 POS 5.0 This is nice stuff. It dries white to clear and stays flexible. It's a perfect sealer and adhesive.
4034 Industrial_and_Scientific_5 POS 5.0 This is my second one (for a travel kit). Awesome door stopper. Very versatile. Genius design. Light for packing. Search online for the three methods of use. Two of them work every time (under-door conventional jam, middle-of-the-door-hanging-over-the-center-hinge jam), however I'm skeptical of one (the over-the-door method).
5748 Industrial_and_Scientific_5 POS 5.0 Fits perfectly, my double car garage works smoothly again
2702 Industrial_and_Scientific_5 POS 5.0 Every new PC build should use this. This is the only thing that comes between my CPU and MOBO.
2557 Industrial_and_Scientific_5 POS 5.0 Nice epoxy.
206 Industrial_and_Scientific_5 POS 5.0 Works for me!
442 Industrial_and_Scientific_5 POS 5.0 We bought this kit to use on a replacement awning we made.
Wear safety goggles!
1138 Industrial_and_Scientific_5 NEG 2.0 I should have done more research before using this with my pellet stove flue pipe. This tape didn't seal my flue pipe worth anything. The only good thing about it is that it comes off very easily without leaving residue after you realize its doesn't work. I used high temperature silicone sealant instead.
Holes in car body panels etc: If you can cover at least one side of the hole with a piece of sheet metal (held in place by JB Weld) that is a good strategy---the combination of pop-rivets and JB Weld often works especially well, even if you ultimately sand the heads of the pop rivets away. TEKTON 6555 Rivet Gun with 40-pc. Rivets
9248 Industrial_and_Scientific_5 POS 5.0 What I was looking for.
9307 Industrial_and_Scientific_5 POS 5.0 Been needing these
4478 Industrial_and_Scientific_5 POS 4.0 nice tray. Didn't fit real well on the Wall Control units.
1) An opened tube thickens quickly. Store open tubes in a small glass jar with a tight metal lid. Old thick Goop does not work well for some uses (such as repairing shoes), but is perfect when you need a thick application--such as insulating an exposed electrical connection or to hold pressure in a leaking water line. It is best to start with a thin layer from a new tube to maximally bond to the surface
8610 Industrial_and_Scientific_5 POS 5.0 This type of connector are great, fully insulated for the spades and then heat shrink to seal to the cable.
8683 Industrial_and_Scientific_5 POS 5.0 I live in a metal home. Picture hanging, and hanging anything in general, was a nightmare. I bought several magnetic hooks in the weight they were designed for. They didn't come loose, but they would slide down the wall. Some of my framed pictures are rather heavy, and I need a way to secure them. I was able to do the job with this 100 lb. magnet. I intend to buy more, and thus, enjoy my artwork.
I was concerned about Amazon reviews of water leaking into the battery compartment. I've tested the brush since then, and found what the weakness is; not cleaning the battery compartment O ring seal after each battery replacement.
2972 Industrial_and_Scientific_5 POS 5.0 I use these in my Hitach NT-65 nailer. they work well.
4059 Industrial_and_Scientific_5 POS 4.0 I bought this for my cousin Aashir over in Pakistan, it was the only thing on his wish list, I guess someone else already got him a centrifuge, 6.8 kilograms of PETN, and a 42" x-ray shielded Halliburton briefcase. But unfortunately Amazon won't ship this product directly to the Middle East. Well this year I decided to go visit him in person for Christmas and give the gift to him. WORST MISTAKE EVER! At the airport, undergoing a Full Body Scan, they never told me why, but they called in a couple of men dressed in funny space-man suits that took me to their van. As I write this review one of my eyes is missing, my left arm has no feeling, and they won't let us swim on the beach in Guantanamo Bay, even though they shower us with water and dunk us in tanks with cloths in our mouths for baths every day! What's up with that?
5352 Industrial_and_Scientific_5 POS 5.0 well made
I like the color (harder to leave behind by accident), and the construction appears to be similar to all the other line splitters out there. For all I know, they all come out of the same factory or were based on the same design.
Best use yet was for stained glass crack repair - if bead is nicely applied, it looks just like the solder, and covers the crack!
2082 Industrial_and_Scientific_5 POS 5.0 Useful little buggers.
8886 Industrial_and_Scientific_5 POS 4.0 Works pretty good for our intended purpose of using it as a hole punch surface. Found we needed to clamp it down better to make it work best.
Of course this information is only current as of the posting date of my review, as prices can, and probably will change in time.
3404 Industrial_and_Scientific_5 POS 4.0 Small switch; works great
Examples are endless. In addition to the examples below, I've used it to repair ceramic plant pots and shoes. I also use it to seal rust spots on my dishwasher rack. The Goop it also makes a "cushioned" surface that will prevent scratches to dishes. I use Goop to close small holes in window screens. I've used Goop to seal holes in air-mattresses.
1052 Industrial_and_Scientific_5 POS 4.0 A little harder to find this "crown type" staple in our local area but nice to find a reasonable price on AMAZON.
3370 Industrial_and_Scientific_5 POS 4.0 Color is perfect, hope it stands up to UVB light for a few years.
3347 Industrial_and_Scientific_5 POS 5.0 This is a great shaped funnel and a must have for type 1 cans to keep it open while pouring.
7274 Industrial_and_Scientific_5 POS 4.0 I have used Small Parts for several projects over several years and this Polycarbonate (PC) Sheet, Transparent Clear, Standard Tolerance, ASTM D3935, 1/4" Thickness, 12" Width, 24" Length, just makes me happy I've discovered this fantastic source of these products. This polycarbonate sheet is just what I need to fab up a base and support for my kayak rudder, I am designing. Easy to cut or file and if needed even bend with heat. I have purchased SCIGRIP 16 10315 Acrylic Cement, Low-VOC, Medium bodied, 5 Ounce Tube, Clear to make my bonds an they are strong with proper preparation of the surfaces to be joined. I really like the product. Another feather in the hat for Small Parts!
6462 Industrial_and_Scientific_5 POS 5.0 Although the inch measurements are in fractions (1/10th and 1/100th of an inch), it's still a very nice caliper!
These probes are typically superior Fluke quality. The retractable shroud over the probe tips works very smoothly, and is excellent. It looks gimmicky until you handle it, and then you realize just how useful it is for avoiding shorting across adjacent terminals.
Step Height (i.e. max material thickness): 1/8
5223 Industrial_and_Scientific_5 POS 4.0 good price
4768 Industrial_and_Scientific_5 POS 5.0 For use with Kreg jig
6234 Industrial_and_Scientific_5 POS 5.0 GooooD. 25.07.2016
7863 Industrial_and_Scientific_5 POS 4.0 Nice quality rods, arrived straight and clean.
9164 Industrial_and_Scientific_5 POS 4.0 These things are great!!!! easy to use and grips wires nice and tight.
161 Industrial_and_Scientific_5 POS 5.0 I've had a pair of these and the cans to match about 8 years now. All are in great shape still. Like these best of 3 different types I've bought.
VIP AUTO NYC
4981 Industrial_and_Scientific_5 POS 5.0 good value
752 Industrial_and_Scientific_5 POS 5.0 I am using this on a solar generator I made using 12v dc. It doesn't say how much it is rated for dc, so I have it fused at 15 amps for safety. I've put between 10 and 15 amps through it with no issues. It's nice and strong and seems quite durable. I also added a dust boot to help with longevity and water resistance.
8012 Industrial_and_Scientific_5 POS 5.0 perfect
2168 Industrial_and_Scientific_5 POS 5.0 Ok
4491 Industrial_and_Scientific_5 POS 4.0 Good Value and worth the money. Has a wide variety of hooks to choose from. Would buy again.
3358 Industrial_and_Scientific_5 NEG 1.0 This stuff is terrible. Only seems to cure *IN* the dispense tube. Made a huge mess in many places where the yellow spewage only hardened on the surface - the space behind was just partially full of sticky goo that never cured. "Re-using" the can is a nightmare as the nozzle clogs hopelessly and repeatedly, even with cleaned with Acetone, pokers, and compressed air. This is basically a "one shot and and hope it works" kind of product. It does say "single use" on the can...and they are not kidding. This doesn't work like a can of spray paint.
If you enjoy using top quality tools then this set is worthy of your consideration.
It is a strong CA glue. The medium consistency is nice.
3856 Industrial_and_Scientific_5 POS 5.0 As advertised
1848 Industrial_and_Scientific_5 POS 5.0 great product, great price, fast delivery.
2414 Industrial_and_Scientific_5 POS 5.0 Used for recent move and helped us maneuver heavy loads in tight quarters
288 Industrial_and_Scientific_5 POS 5.0 Typical DeWalt high quality
There are some saying Arctic Silver 5 didn't lower their temperatures. That is almost certainly because they're using it incorrectly, which I can understand since the instructions provided are minimally useful. So for those of you who are not familiar with applying thermal paste, here is the process:
7751 Industrial_and_Scientific_5 POS 5.0 Great price and excellent product...
2892 Industrial_and_Scientific_5 POS 4.0 As advertised. No complaints.
210 Industrial_and_Scientific_5 POS 4.0 Fits and works well.
3409 Industrial_and_Scientific_5 POS 5.0 I bought this to replace the one the town gave me for recycling. The only problem is I had to get the lid from another company. Other than that, it's perfect.
7908 Industrial_and_Scientific_5 POS 5.0 Wonderful to be able to purchase this through Amazon with prime free delivery. Excellent quality product
544 Industrial_and_Scientific_5 POS 4.0 Carrying sheet goods solo is a fact of life for me, and getting them from the street up to wherever I happen to be working in the house can present a challenge.
9487 Industrial_and_Scientific_5 POS 5.0 I'm happy with this kit. The pegs aren't the large, commercial, heavy duty ones, but are still very sturdy. I have a 5 lb hammer hanging on two of them. There is a great assortment for all of your needs
Let me know if you found this review "Helpful"
2095 Industrial_and_Scientific_5 POS 4.0 good
4219 Industrial_and_Scientific_5 POS 5.0 Great disposable scalpels, these are for hobbyist use. They are quite sharp and very sturdy. The blades are secured quite well. I use them for cutting paper tubes etc so it's definitely "off label use." I've yet to have a blade come out on me. The handles are plastic so there is a limit to pressure one can apply. The blades are quality surgical steel and hold their edge.
Guess I am stuck. I don't see how this would make anything into a quick disconnect unless what it is attaching to is more than 4 inches in diameter.
For needle sharp tips, the TP88 pin probe adapters fit perfectly onto these probes. The only drawback to the TP88 adapters is that they are only rated for use to 60VDC.
8207 Industrial_and_Scientific_5 POS 5.0 Perfect fast.
First, this is large so be sure you measure; I only had 1/2" side to side clearance. Second it is high power so needs its own circuit; most kitchens have one, sometimes two dedicated circuits in addition to the stove and regular outlets. My only complaint is the darn plug. Why these vendors make a straight plug for an application where the outlet is typically behind the appliance makes absolutely no sense. The widow air conditioning people have learned to use a flat, right angle plug and the microwave and coffee pot people should learn their lesson. You may want to buy an outlet adapter so the cord doesn't stick out. (I chose an AssorRite Vertical Wall Tap - 3 Outlet - UL Listed from Amazon for $5)
Will be buying again as my skills improve.
1339 Industrial_and_Scientific_5 POS 5.0 This trash can dolly is built to handle heavy loads, the rubber covered plastic wheels give good grip keeping it where you want it to go rather than sliding all over on hard plastic wheels. The casters have ballbearings and move in the direction you want. This is designed for one or two Rubbermaid Commercial "Brute" Heavy Duty barrels, they twist lock at the base and stay in place until untwisted. One side folds up when using only one Barrel but still moves easy loaded or not.
2801 Industrial_and_Scientific_5 POS 5.0 Works great
3768 Industrial_and_Scientific_5 POS 4.0 This edge finder works well. The audible portion is neat, but you'll probably never hear it in any shop. Good price.
9042 Industrial_and_Scientific_5 POS 5.0 These work great in my light duty Bostich pneumatic nailer.
2319 Industrial_and_Scientific_5 POS 5.0 This dry lube is the way to go. I used to roll my rifle cases in a pad with the RCBS lube on it. What a mess that was.
6397 Industrial_and_Scientific_5 POS 5.0 Very nice unit; I like the different available units and easy to read LCD. I had an old analog one and it would take me too long to get readings specially with tiring eyesight.
I am slowly learning how to work with this tester, but I think I am more at home with a unit with a sensitivity control. While they can be a bit harder to use, I did have more confidence in my old Klein sniffer.
4173 Industrial_and_Scientific_5 POS 5.0 Easy to work once you get first blade fit , shipping was fast .
I liked the unit and I rated it at 5 stars. It is good for the electronics home enthusiasts and it is priced well.
6848 Industrial_and_Scientific_5 POS 5.0 Works great
4518 Industrial_and_Scientific_5 POS 5.0 great
(2) GIGAHERTZ SOLUTIONS meters
4450 Industrial_and_Scientific_5 POS 5.0 works great.
Highly recommended!
8624 Industrial_and_Scientific_5 POS 5.0 its slippery
2826 Industrial_and_Scientific_5 POS 5.0 I've used this for a few high performance PC builds and to fix other things (most recently an Adonit Jot stylus that lost conductivity).
Will be buying again as my skills improve.
Color Black
6045 Industrial_and_Scientific_5 POS 5.0 Arrived in good condition. I use it for racking and bottling beer. I works great for that purpose.
Both have good extraction, leaving the carpet with the same level of dampness.
485 Industrial_and_Scientific_5 POS 5.0 they last so much longer than the normal paper towel I realize they're normally only used with men but from a woman standpoint they're durable and reliable and seem to clean so much better and when cleaning they work perfectly
I know a whole lot can't be said in a review about nails, but for the small things that count (shipment packaging and quality of the nails), these nails are great.
7386 Industrial_and_Scientific_5 POS 5.0 This stuff works exactly as expected but the Amazon price isn't really any better than your local Home Depot, even including sales tax. Be sure to compare before buying online.
2' 4.5mG
8756 Industrial_and_Scientific_5 POS 5.0 Perfect tool for milling through metal.
7423 Industrial_and_Scientific_5 POS 5.0 I got this for my 2 year old to play doctor. It works...but not very well if you really wanted to use it as a real stethoscope. I tried it on myself and daughter and can faintly hear our heartbeats. Another reviewer mentioned that you can use either side of the head and one side may be higher in volume than the other. I didn't find that to be the case for the one I got.
8993 Industrial_and_Scientific_5 POS 5.0 Good
5042 Industrial_and_Scientific_5 POS 5.0 worked perfect
9161 Industrial_and_Scientific_5 POS 5.0 These connectors are far superior to the traditional domestic wire nuts. They allow easy addition or removal of Romex power lines from a junction box power system. I have made a habit of using the center of the three connectors as the 'feed' connection bringing power into the junction box and then the outer two connections serve as a means to distribute power out to various loads. With this consistent connection method, I can easily remove a 'load' wiring connection without constantly going back to the circuit breaker panel to shut off that circuit breaker branch. Another benefit is that each Romex wire is held and connected independently unlike wire nuts which can easily have one or more wires slip out during assembly. I will be using these in a speaker installation of a sound system for a church that is coming up soon. A great improvement of the old school method of wire nuts!
6033 Industrial_and_Scientific_5 POS 5.0 Met my needs perfectly
1942 Industrial_and_Scientific_5 POS 5.0 excellent
8035 Industrial_and_Scientific_5 POS 5.0 Very dirty, but very easy to clean up with a bit of polishing compound. shipped in a thick tube that looked like it could survive a nuclear blast. Arrived in great condition.
8174 Industrial_and_Scientific_5 POS 5.0 I thought I had gotten smaller rods but these did not disappoint. Going to use them in a side bending jig.
6962 Industrial_and_Scientific_5 POS 4.0 as described
4063 Industrial_and_Scientific_5 POS 5.0 The used stuff has a nasty aroma, and sometimes isn't all that hygienic. Well, it really depends on what you want to use it for I suppose...
3738 Industrial_and_Scientific_5 POS 5.0 Great
9266 Industrial_and_Scientific_5 POS 5.0 item is as described.
I like that the seller had a card in the packaging to contact them if there are any issues- I like that option in case a lid was missing or broken. I had another set I ordered from a different seller with one lid broken. Amazon wanted me to reorder the whole thing and return the other set which was a pain. I'd prefer to deal direct with the seller and just get the new lid.
996 Industrial_and_Scientific_5 POS 4.0 acceptable stuff
6139 Industrial_and_Scientific_5 POS 5.0 Great
1549 Industrial_and_Scientific_5 POS 5.0 As recommended I use this to secure things in my turtle take and to keep it water tight. This is the exact brand used by most aquarium builders.
9397 Industrial_and_Scientific_5 NEG 2.0 i ordered 1 to use on my 9 in south bend but sold the lathe before i had a chance to use it. when i got my new (30 yr old) lathe in broke it out to center a 3 inch piece i has turning to make a ball turner. after several minutes of use the dead center developed a wobble (about 30 thou) .I don't think it was a good buy at all.
Irwin Item #: 10221
I finally tried ABS. It sticks so well with 80C beds that it basically ruins the bed. I had extra so I cut a new one. Be careful and do tests starting at low bed temps if you do ABS cause I have not found a magic number that works yet. If you make a mistake and get the temp too high the bed piece is probably ruined. Still love it for PLA though.
1' 20mG
Pointed tip does indeed prevent the bit from wandering or skipping when starting a hole. No counterpunch or pre-drilling required to achieve accuracy.
9783 Industrial_and_Scientific_5 POS 5.0 I use this to turn my wax planner on and off while extracting honey. My hands are all sticky and I don't want to touch anything so this foot peddle is great.
9007 Industrial_and_Scientific_5 POS 5.0 This is a very well made 18 gauge brad nail set. The consistency is very good and penetrates well - I use this on moldings against dry wall. The convenience and price here is just excellent. Made in Mexico.
Couple of good uses I've found...
8194 Industrial_and_Scientific_5 POS 5.0 Nice material.
5717 Industrial_and_Scientific_5 POS 5.0 Great, fast, I like the product
2161 Industrial_and_Scientific_5 POS 5.0 as advertised. useful for weeding at bases of cactus.
6621 Industrial_and_Scientific_5 POS 5.0 This is the best production penetrating oil I have ever used.
4360 Industrial_and_Scientific_5 POS 4.0 good valu
This toothbrush also lacks the many different modes, like gum cleaning, quick cleaning, gentle cycle, etc. It does have a timer, which shuts off, but no quadrant beeps to tell us when to move on to another section.
JB-Weld is a very strong epoxy cement. JB-Weld is the cement/glue of choice when joining metal parts or filling holes in metals. Otherwise, ordinary epoxy cement or other types of cements/glues are usually better choices. Some other reviewers have complained that the descriptive name "weld" is inappropriate---to some extent that's true. JB Weld can do some jobs welding can't. Conversely some simple welding jobs like joining two thin metal rods at right angles are difficult with JB Weld.
1919 Industrial_and_Scientific_5 POS 5.0 q not totally transparent, but strong.
7930 Industrial_and_Scientific_5 POS 5.0 Good quality product. Would do business again. Highly recommend!
5871 Industrial_and_Scientific_5 POS 5.0 best tape i found
8614 Industrial_and_Scientific_5 NEG 1.0 HOLY FLYING NEEDLES, BATMAN!
505 Industrial_and_Scientific_5 POS 5.0 I love irwin step bits and this one wasn't an exception. Took out nice soft copper very easily. with no real signs of wear after going through about 1/4 of copper.
5356 Industrial_and_Scientific_5 POS 5.0 This foam backer rod works great to fill larger gaps prior to applying cocking sealant. The foam is very flexible and can be used to fill even smaller cracks if you use a took to firmly press the backer in place (I used a plastic scraper to press the backer into a small crack). I used this backer to fill a large gap around a door frame in the old house we are renting because the framework has apparently shifted over time. I then filled the crack with a brown wood cocking sealant and the crack is no longer noticeable.
3925 Industrial_and_Scientific_5 POS 5.0 That when I cracked the block on my Model T, JB Weld fixed it.
This is a simple, no frills machine. There are no attachments, although the owner's manual makes mention of an optional upholstery tool. (I have scoured Hoover's website and the internet but can find no upholstery attachment that is indicated for this machine so far.) This machine is designed to clean rugs and carpets quickly and thoroughly. There are 3 brush settings for spot cleaning, gentle cleaning and regular cleaning.
(9) Uncovered CFL Bulb
1400 Industrial_and_Scientific_5 POS 5.0 It's hard to beat this tape for performance. We've been using it for many years for packing boxes and never had a problem. You do have to press it down to make sure it's going to stick well if you're going to leave packages outdoors or in your garage for the postal service to pick up, but that's true with most of this type of tape. We've used other brands that were so frustrating to use because they were so thin and hard to manage. We always come back to this tape instead.
1382 Industrial_and_Scientific_5 POS 5.0 Hands down the best shipping tape, I have used many brands. Yes there is a difference in tape, 3M is always the best. You will always pay more for any 3M tape but you know it will last through its entire journey in the shipments it seals up.
9583 Industrial_and_Scientific_5 POS 5.0 Great, just what my boyfriend needed for work and he was thrilled with the price!
1195 Industrial_and_Scientific_5 POS 5.0 I like this stuff to seal gaps around a window air conditioner. It's big and fat, squishes down to form a good seal, has adhesive on one side -- ideal, good value. Buy several rolls!
7743 Industrial_and_Scientific_5 POS 5.0 Perfect!
3581 Industrial_and_Scientific_5 POS 5.0 tight seal and work well for my purpose.
1577 Industrial_and_Scientific_5 POS 5.0 EXCELLENT VALUE.
More recently, I boxed up a return shipment using some cheap packing tape laying around. Cheap = thin and not sticky. It was a chore getting the cheap stuff to feed into a dispenser. After continual tears, I gave up and pulled what I needed off the roll. Every time I cut it, it was aggravating trying to find the nearly invisible end and peel it off the roll.
2919 Industrial_and_Scientific_5 POS 5.0 I use these to jumper around switches and interlocks when debugging HVAC equipment & appliances. I do not leave them on as that would be dangerous to all involved, but these are incredibly handy when diagnosing problems with faulty safety switches and interlocks.
These are no bargain. Junk.
7800 Industrial_and_Scientific_5 POS 5.0 Shipping was fast, packaging was terrific: thick cardboard tube.
Only $50?! It does a better job than my $4oo plus vac but consider it almost "disposable" if you expect it to last over a year with heavy use. When you first turn it on, it grabs the floor immediatly with lots of suction. I want one for every room now! ha ha And I have a small house! Watch out for some of the negative reviews because many complain about how it falls or tips. The vac does not have to be propped on anything, it will stand on it's own if you lean the handle over the vaccum head. Not something you figure out right away I will admit.
1947 Industrial_and_Scientific_5 POS 4.0 I really like this tape. It is strong, which I need when i recycle cardboard boxes. If the cardboard comes untied or untaped, before the garbage pickup we can get a ticket from the sanitation dept. This keeps everything together.
2200 Industrial_and_Scientific_5 POS 5.0 I have a bunch of these things. I use them mostly for moisture protection for firearms, since I live in very humid South Georgia. I have found that these 40 gram units work very well. I check the indicators on them frequently, and find that in summer they will need "recharging" about every two months, in winter only about every four months. This refers to items kept inside an air conditioned house. The recharge is really just drying the silica gel, done in an oven set at 300 degrees for 2-3 hours. No odor, so your wife won't get mad..I stick mine on a cookie sheet and let them bake while I do other chores. Good product, recommended..beware of some on the market that LOOK almost the same as these, but contain less gel, or crummy gel. The knock-offs are usually much lower-priced than these, but are a total rip-off.
6429 Industrial_and_Scientific_5 POS 5.0 Product is solid. No issues.
4215 Industrial_and_Scientific_5 POS 5.0 quality products
3532 Industrial_and_Scientific_5 POS 5.0 Works great just a little tough getting out of tube.
1124 Industrial_and_Scientific_5 POS 5.0 not much you can say i used them for cleaning my stove verses drywall frankly they work great for that so when you get done walls clean you oven and grill and smoker great scrubber
ELECTRICAL
No two manufactures do their buttons the same way.
4719 Industrial_and_Scientific_5 POS 5.0 This is for PLUMBING applications! Not leather. Not sewing machines. (Seriously?) This solvent also didn't make me rich or cause hair to grow, but it doesn't claim to.
8340 Industrial_and_Scientific_5 POS 5.0 Fantastic stuff...maybe a little TOO fantastic, given that it took forever to modify it for my purposes, hah.
5128 Industrial_and_Scientific_5 POS 5.0 good deal on hard to find item
3067 Industrial_and_Scientific_5 POS 4.0 I use these screws in my furniture manufacturing. I use them everyday and never had a problem with them. I would highly recommend them to anyone. A+++
1556 Industrial_and_Scientific_5 POS 5.0 Works great
2751 Industrial_and_Scientific_5 POS 4.0 Works very well, but it's not necessarily "the best". If you want your stuff to last as long as possible, use a long-lasting thermal compound such as Arctic MX-4. Most thermal compounds last 2-3 years before breaking down.
2464 Industrial_and_Scientific_5 POS 5.0 As described and on time
The tubes cost more per ounce, but it's cheaper for me in the long run.
8358 Industrial_and_Scientific_5 POS 5.0 All is well, will do business again.
7911 Industrial_and_Scientific_5 POS 5.0 Aluminum 6061-T6 Rectangular Bar
9441 Industrial_and_Scientific_5 POS 5.0 Good kit
8883 Industrial_and_Scientific_5 POS 5.0 Depending on your particular application, this material deserves consideration. It's strong enough to thread screws into, non-conductive, and cuts with any decent saw. I used it to make the front for a switch panel, and it's just what the doctor ordered. Since it's translucent, you can even backlight it with a simple light bulb. Really cool...
818 Industrial_and_Scientific_5 POS 5.0 the design is perfect. i was able to hang a tarp where i wanted it and cut it, then install the grommets.
8776 Industrial_and_Scientific_5 POS 4.0 Used to have a drawer full of these... but here I am buying another one. They really should come with the stapler! What I like about these is the texture on the handle. Much less apt to slip.
9761 Industrial_and_Scientific_5 NEG 1.0 Glue is fine, but it is the most ridiculous packaging on the face of the earth. Enough of a reason not to buy it.
7176 Industrial_and_Scientific_5 POS 5.0 I used it to extend the return tubing on my Grainfather's recirculation pipe when mashing smaller grain bills. It's almost exactly the same size as their stock silicone tubing, and you can customize the length.
4082 Industrial_and_Scientific_5 POS 5.0 Shipped quickly and was just as described.
9449 Industrial_and_Scientific_5 POS 5.0 My husband and I purchased these to go along with a peg board for our brother-in-law. He is a mechanic and just opened a shop. We purchased the Wallpeg pegboard. The accessories made by wallpeg brand were cheap and horrible, so we ordered these to go along with the peg board. These are way better! I want to add that the little black things in the package are to anchor in the hooks and accesories. This kit seems to be univeral and fit the Wallpeg peg board great! Nice assortment and excellent price for the quality and durability !
8564 Industrial_and_Scientific_5 POS 5.0 seals well
* It keeps zero very well. some times i get dust in between the jaws and it reads wrong but that's not the products fault. easily fixed
2 Industrial_and_Scientific_5 POS 5.0 Worked great for my lapping bench. I would like it if the adhesive were backed with waxed paper for storage and keeping the grit out, but all but the first 6 inches or so still functioned when it arrived. I used rubber cement to remedy that.
2632 Industrial_and_Scientific_5 POS 4.0 There's mostly good here with a couple of caveats. The good first: Very well made. Easy to assemble. Relatively lightweight. Easy to pull and extremely flexible in terms of the configurations you can get it into. The only downside is that it's very narrow. I kept being afraid that my material would slip off. I think I'll be building an easy-to-install platform and that should do the trick. Other than that, I highly recommend. It's rock-solid.
7203 Industrial_and_Scientific_5 POS 5.0 Quality as expected.
- consult a lawyer if you intend to weaponize it or store it in a safe deposit box
On the other hand, if you like lots of extra information, then please by all means read-on
8853 Industrial_and_Scientific_5 POS 4.0 Good product at a good price.
5833 Industrial_and_Scientific_5 POS 5.0 A++++
1956 Industrial_and_Scientific_5 POS 5.0 Love this stuff. Finally SOME resistance against the weather. Easier to shape and form. Cool "I know my duct tape better than you do" appearance. Will order much more.
2366 Industrial_and_Scientific_5 POS 5.0 very nice small lift. I use it to raise my riding mower to work on it!
4000 Industrial_and_Scientific_5 POS 5.0 The package says that this product has 1001 uses. I was hoping that repairing the boiler in a 30 year old Gaggia Classic Espresso Machine was one of them. Or perhaps I stumbled upon use number 1002. My model is an older version that has not been made in so long that it's impossible to get parts. When the boiler became pitted and corroded on the edges, it became impossible for the gasket to seal it because there was no longer enough metal to cover it. The boiler is made of steel with an integrated heating element and welding to a cast surface along edges to fill pits was not something I was looking forward to.
4455 Industrial_and_Scientific_5 POS 5.0 This works well
This has bonded well and strongly with every material I ever applied it to.
7895 Industrial_and_Scientific_5 POS 5.0 good
Cheers!
904 Industrial_and_Scientific_5 POS 5.0 good quality
6392 Industrial_and_Scientific_5 POS 4.0 I'll be using this to set blade depth on my saw. The digital read-out is large and ease to read. I chose this one for the price. I don't need pro category tools.
511 Industrial_and_Scientific_5 POS 5.0 BUGGA IS CHERRY!!!
So, all in all it is a great machine, aside from bogus commercial claim.
2924 Industrial_and_Scientific_5 POS 5.0 Just got this thing yesterday and have been using it a lot since then. Don't know why I didn't get one of these sooner since they make all kinds of experimentation quicker and easier. Will probably end up adding another one in the future for quick voltage dividing on a breadboard.
7624 Industrial_and_Scientific_5 POS 5.0 Neat little packages that make cyano-acrylate ( CA) so convenient to use. The Krazy brand - from my experience - seems to be very good compared to other brands and they have not gotten the " make me rich fever" with a fair price- so far. I got some "no-Name brands too and I will try and keep track of how they compare to the Krazy brand. I tape the little nozzle into a duct tape fold ( tape around the end of the nozzle to seal the end from air- you need to be able to pull on the ends of the tape and the nozzle will come free for the next job.) and the glue seems to work well a month or 2 after it has been opened. You just yank open the tape fold and the container is read to go for the next job. I find that I don't need too much quantity but just want it for those many little jobs around the house and garage. If one is not careful you can pay too much for this stuff. There is an adhesive company that goes around buying up others( for a monopoly) and the prices that they command are almost criminal, hey it is the American dream, give you nothing and charge super high prices.
7044 Industrial_and_Scientific_5 POS 5.0 Very nice. Delivered on time and as expected. Would gladly buy again.....
It works great and good size rolls.
NTE also makes these kits with all red or all black tubing in assorted sizes.
9993 Industrial_and_Scientific_5 POS 5.0 I bought these cotter pins from Amazon after having to pay over a dollar for an individual pin. I thought the charges were ridiculous. I now have enough cotter pins for the rest of my life.
9339 Industrial_and_Scientific_5 POS 5.0 very good
ELECTRICAL
Better out there but at a much higher cost
8339 Industrial_and_Scientific_5 POS 5.0 Fills its purpose for sliding window and door security. Our house had windows and doors from the 80s with thin frames and shoddy locks (original and aftermarket type). I wanted something more significant that wasn't a wonky hack. I got some of these bars and cut them down to size to allow secure venting. I plasti-dipped them to stop the rust and put some 550 cord around them in loops to aid in lifting. I know it's overkill, but I find 2x4s tacky in this application and the metal bars fit snugly in the tracks, looking very sleek. Now I know that crooks would certainly have to break the windows or doors to gain entry. I'm sure if your project calls for sturdy, heavy dimensional steel bars, these should work for you too! These aren't stainless so prepare to deal with oxidation somehow.
Gave this item only 4 stars because the wheels don't really roll easily with 300lb on them.
8691 Industrial_and_Scientific_5 POS 5.0 Solid construction, felt firm and the latching mechanism feels sturdy. I expect this will last longer than I need it too.
9672 Industrial_and_Scientific_5 POS 4.0 Thanks, no problems
2046 Industrial_and_Scientific_5 POS 5.0 These exude high quality. The connectors, the cable, are a different class when compared to cheaper leads. I'm definitely a fan of the Fluke leads. Pomona also makes some great leads, and are available in even a larger variety than Fluke.
5479 Industrial_and_Scientific_5 POS 5.0 I use this to adjust the PH for watering the house plants . They accept nutrients very well when they have the recommended PH every time .
4097 Industrial_and_Scientific_5 POS 5.0 very reasonable, also reusable.
It is very easy to maneuver and has a great table top surface for parts, etc.
672 Industrial_and_Scientific_5 POS 5.0 works great!
2856 Industrial_and_Scientific_5 POS 5.0 Yes, this product really sucks! That's a good thing!
(.054) and it works PERFECTLY in my drill press. Does a very clean and
5203 Industrial_and_Scientific_5 POS 5.0 good product
6818 Industrial_and_Scientific_5 POS 5.0 it is what it says
8530 Industrial_and_Scientific_5 POS 5.0 I liked the good quality of the tubing. The stated size was accurate. I would buy it again, if needed.
Some did show signs of nicks on the threads but so far, they seem to be holding up well without any air leaks, (I keep the compressor set to 100psi). Of course, I wrap each threaded end with Teflon tape prior to assembly. I must admit most small brass fittings such as these, often do ship to hardware stores without thread protection.
7646 Industrial_and_Scientific_5 POS 5.0 I do a lot of remodeling, and I get into every kind of hazardous airborne particles you could imagine. There are times I have to use a respirator, but most of the time I just use a dust particle mask. I bought them by the cast and go through a half dozen or more a day. I thought they were the most feasible application, but over the years I noticed I had become a bit more sensitive to formaldehyde, fiberglass and the overall accumulation of unknown particles. I would put a foam strip on the nose piece to keep my breath from fogging up my goggles, and even an extra wrap to hold it on more snuggly. I have tried every type of mask on the market. They either just hung on my face like a cardboard box, clog up immediately or became saturated with moisture while breathing. Most were just way too expensive and over rated.
6217 Industrial_and_Scientific_5 POS 5.0 arrived as advertised
9382 Industrial_and_Scientific_5 POS 5.0 It turns smoothly and is nice and big like I needed it to be. Very pleased.
5394 Industrial_and_Scientific_5 POS 5.0 AAA
3001 Industrial_and_Scientific_5 POS 5.0 Does a great job in my Porter Cable finish nailer, no misfires or jambs.
2690 Industrial_and_Scientific_5 POS 5.0 EXELENTE
Millions of other uses for it as well. Just let your imagination do its job and you will complete that list.
9288 Industrial_and_Scientific_5 POS 5.0 nice assortment of snap rings
2264 Industrial_and_Scientific_5 POS 5.0 Product was received promptly and was what I expected (I have not used is yet, but anticipate it will perform consistent the the reputation that Gorilla glue has)
1843 Industrial_and_Scientific_5 POS 5.0 works great just like they should.
244 Industrial_and_Scientific_5 POS 5.0 AWESOME nails just like you buy it at your local stores.
5329 Industrial_and_Scientific_5 POS 5.0 I use these screws for general rough construction on 2x stock and around the shop for assembly of rough projects like shelving and pockethole assembly. Yes they work just fine.
1443 Industrial_and_Scientific_5 NEG 1.0 I read the negative reviews for this tape but since they were several months old, and the 3M company representative had responded to them, I took a leap of faith and hoped that Amazon's stock had been replaced and the problem resolved.
8452 Industrial_and_Scientific_5 POS 5.0 Works great.
Unibit #10234 aka #4: Hole Sizes 3/16" - 7/8"; # of Holes = 12; Maximum Material Thickness = 1/8;
Do note that the funnel can be difficult to remove when filling and my wife absolutely cannot re-install it after she removes it. She likes using the can once it is filled but does not like filling it. I do believe it is more difficult than necessary and that is the only reason I ding it one star.
9033 Industrial_and_Scientific_5 POS 5.0 cheap but does it's job
6159 Industrial_and_Scientific_5 NEG 1.0 Not the quality you can relied on! The crimp material is made of inadequate material SOFT ALUMINUM. After the crimp, in 2 places on each side, the wire is not held secure, I pulled it out with little effort. This goes for all of these items I am reviewing. When I was first hired after college, the guy I was assigned to sat me down with a pair of crimpers and 500 wires, for 18 gauge to 12 gauge, told me to put the proper crimp inline terminals on the end of the wire and call him when I was through. Needless to say, it took some time, strip, crimp and go to the next. Bob (his real name is Robert) came back sat down and proceeded to check each crimp using a pliers to pull on the crimp after wrapping the wire around a conduit pipe. None could be pulled loose by him. He looked at me and said: "You can work with me!" We were together as a team for 4 years. I understand crimps, these are not crimps, the internal metal crimp appears to be SOFT ALUMINUM. This means you cannot solder them in a pinch and then slide the insulator on to the crimp and tape for a temporary fix. NO I DO NOT RECCOMEND FOR ANY USE TO ANYONE for ANY JOB.
1" 15mG
3557 Industrial_and_Scientific_5 POS 5.0 Easy to put together with the tool and no leaks
The Neiko seems to get decent reviews, probably mainly because it is the cheapest one and soo many more people have bought it, but compared to all of the other calipers in the roundup it actually scored low across the entire data set. The build quality and accuracy is not all that great compared to the iGaging EZCAL. There is a gap between the internal measuring jaws which renders all internal measurements inaccurate.
7601 Industrial_and_Scientific_5 POS 5.0 Great light, however, it runs a bit dim -- I shone it in people's eyes with no problem (even though you're supposed to only shine it on the sides or briefly over their pupils). It's great for the price and what it does, but does feel a bit cheap.
496 Industrial_and_Scientific_5 POS 5.0 Oh these are great these are always great better than the regular paper towel and I hide mine so that I have them when I really need strength and absorbency
I was able to produce accurate, clean holes in 3/4 fir plywood with each of the 4 drill bits, as long as I drilled it to the maximum diameter of the bit. So if you live with 1/2, 7/8 or 1-3/8 holes, you are not really constrained as to thickness of your wood. The bits all cut quickly and cleanly through the material. Of course this is a very special case, but I thought it worth mentioning nonetheless.
8228 Industrial_and_Scientific_5 POS 5.0 perfect for my application
9135 Industrial_and_Scientific_5 POS 5.0 OEM fit. Easy repair.
4319 Industrial_and_Scientific_5 NEG 1.0 I had this microwave one time this modelI hated it it did not cook the food right.the food never was hot or warmI finally gave it to Goodwilland it was so heavy to I do not recommend this microwave it's a piece of junk buy a Sharp microwave instead they are the best.
5828 Industrial_and_Scientific_5 POS 5.0 A must-have for around the house. Useful for so many things. Strong and stickey.
296 Industrial_and_Scientific_5 POS 4.0 Very stiff, I thought it was flexible like a flapper. This cuts metal.
5052 Industrial_and_Scientific_5 POS 5.0 Great quality, would buy again.
2711 Industrial_and_Scientific_5 POS 5.0 Worked Very Well
But I would make the purchaser again.
2036 Industrial_and_Scientific_5 POS 4.0 This test leads are good only if you have special tips what plug in to them. I will NOT work as extension to existing leads. So I have to buy special tips to use them
6012 Industrial_and_Scientific_5 POS 5.0 As a physician for over 30 years, I have used many different stethoscopes. This is as good as any them at an incredibly low price. Sound quality is excellent. The tubing is soft and flexible, unlike the usual cheap scopes. I highly recommend, especially if you are prone to losing your stethoscope.
1104 Industrial_and_Scientific_5 POS 4.0 Good
Consider/test:
9227 Industrial_and_Scientific_5 POS 5.0 worked well for tapping my exhaust manifold for a Pyrometer
3836 Industrial_and_Scientific_5 POS 5.0 Good product
The second batch from "VetMed USA" are slightly different cups. They are still pretty good, were shipped promptly and so on, but not the same as the first batch, and significantly, not the same as the one in the listing photo. The photo shows a sharp upper lip to the cup, which is what I got in my first order. The second batch has a rolled-over upper lip.
894 Industrial_and_Scientific_5 POS 5.0 Not premium.... no ball bearings but solid and good for my purposes.
41 Industrial_and_Scientific_5 POS 5.0 This is the best way to repair an air mattress hole of any size! Cut a piece of any cloth and put glue on both sides and apply to hole. After about thirty minutes put any kind of paper over the cloth and press down to eliminate the bubbles. keep pressing out the bobbles till almost cured, or dry. About three hours. :)
My large ceramic nativity scene was on my narrow fireplace surround. It held everything, from the large manger to the tiny baby Jesus, without whimpering. Everything was solid and secure. When it was time to put it all away, I simply picked them up and easily removed the gel from underneath (and returned it to the jar to use again!).
I think the manufacturer and resellers should do a better job of explaining the difference, which is why I gave it only 4 stars.
5045 Industrial_and_Scientific_5 POS 5.0 Just what I needed , a good fitting an saved $.
Use this product on the rollers and hinges on my over-head garage door.
6903 Industrial_and_Scientific_5 POS 5.0 This is a great assortment if you just want to get some heat shrink for around the house electronics projects. I have used it on christmas lights spliced together and several low voltage projects. Good deal for price and variety that comes in the package.
8287 Industrial_and_Scientific_5 POS 5.0 This was just incredible. I use it to hang a windsock in the back yard. Does great.
6119 Industrial_and_Scientific_5 POS 5.0 Works great on standard pegboard.
I'll continue using my fluke meter and amp clamp, and if I break them I'd replace with another fluke. Their leads on the other hand, I'm giving up on.
8056 Industrial_and_Scientific_5 POS 5.0 exactly what i needed.
* Love the analog knobs (while not fine tuned) they do not wobble around
4212 Industrial_and_Scientific_5 POS 5.0 Great for epoxy; much cheaper than buying from a specialty retailer.
5135 Industrial_and_Scientific_5 POS 5.0 Work perfectly
8713 Industrial_and_Scientific_5 POS 5.0 Can't gainsay the negative reviews, as mine worked as advertised. We monitor cooling fan RPM, with them. It works best when held about 6" to 8" from the reflector tape and at right angles to the tape. We noticed that bright, ambient light reflected from a shiny fan blade will false-trigger the tachometer. Turn the lights down. Otherwise, the tachometer updates every couple of seconds, or so. Very nice, reliable unit, when used as described.
6971 Industrial_and_Scientific_5 POS 5.0 This silicone tubing is mighty hard to find locally, but surprisingly Amazon sells it! It is used as inlet and outlet hoses for my Katadyn Pocket Water Filter and this stuff works great and makes a long length so I don't have to be right on a river bank to get water. I'm going to purchase some more to use for other projects that I have going on too!
GOOD QUALITY
1425 Industrial_and_Scientific_5 POS 5.0 Excellent Shipping Tape, I used cheaper tape in the past but it wouldn't stick to itself or the box. This type seems to stick to everything. No more cheap stuff for me.
5338 Industrial_and_Scientific_5 POS 5.0 just as it should be
1346 Industrial_and_Scientific_5 POS 5.0 Great quality
Note: I can't imagine who might work so close to one, but keep CFL bulbs without specific UVB and UVC mitigation (think double-envelope eco bulbs, for example) more than 20cm/8" from people at the bare minimum. If you don't know the technology of your CFL bulb, might as well play defense.
5339 Industrial_and_Scientific_5 POS 5.0 good quality
I just can't recommend this for 4" OD ducting. The connector itself is made quite well and I have no complaints. I'm sure it is a perfect item for its intended application.
6861 Industrial_and_Scientific_5 POS 5.0 Great assortment of heat shrink if you are getting started as a hobby.
7833 Industrial_and_Scientific_5 POS 5.0 Arrived perfectly straight.
Only was able to drill one hole.
I knew that wasn't true so I bought is - yes, it's fine. But this saved me a lot of cash and it's easy to use.
7146 Industrial_and_Scientific_5 POS 5.0 If you have an older Insinkerator that used the wrong vinyl tubing, this is what you need to replace the cracked and leaking tubing. Tough to find high temperature tubing anywhere but a scientific supply or Amazon. Posted photo shows the Insinkerator repair. Fast delivery, all things considered, great value.
5254 Industrial_and_Scientific_5 POS 5.0 Laus Deo :-)
Any movement will turn it on, and this causes the battery to drain quickly.
5688 Industrial_and_Scientific_5 POS 5.0 I used these to oil some hinges on my windows and doors and now they operate smooth like butter. I highly recommend this.
1029 Industrial_and_Scientific_5 POS 5.0 So far holding up just fine, brads sliding thru the wood like a hot knife thru soft butter, no bending goes where you shoot it.
Highly recommended!
When I need more, I'll get more AS5 no question.
One more thing. If you are looking for an indicator to measure the runout of precision spindles, this is not the best one to choose. To measure runout accurately, you are better off with test indicator with a 0.0005" graduations.
4980 Industrial_and_Scientific_5 POS 5.0 Fits good
Just needed a big enough order to get them free shipping--lol
While Goop dries clear, over time it does tend to yellow. The other issue is that it tends to thicken in the tube after 6+ months so after a while it isn't as easy to work with.
Fluke makes very good electrical test equipment and I have two of these VoltAlert testers.
8656 Industrial_and_Scientific_5 POS 5.0 worked as promised
2326 Industrial_and_Scientific_5 POS 5.0 Good lube. Prevents casing damage in reloading.
The glue works but is messy and doesnt dry as quickly as other super glues.
2230 Industrial_and_Scientific_5 POS 5.0 Works good.
1589 Industrial_and_Scientific_5 POS 5.0 Good stuff
1999 Industrial_and_Scientific_5 POS 5.0 I picked this up so I could use my clamp meter to test items plugged into the wall safely without having to create my own "breakout" wires. Works great with Fluke A/C clamp meter attachment on my Flike 87V. Kinda big in size in the tool bag, but I don't know how it could be much smaller and still have the regular and 10x test areas along with the probe insert holes. Good product and a must have for a clamp A/C meter.
4942 Industrial_and_Scientific_5 POS 5.0 Well machined.
2188 Industrial_and_Scientific_5 POS 5.0 These are a nice set that are made in Pakistan. The tips are fairly straight and the locks are fairly well made as well. These are great for the price.
Very solid tape, nothing punctured.
9172 Industrial_and_Scientific_5 POS 5.0 As advertised.
5747 Industrial_and_Scientific_5 POS 5.0 I received the carriage I ordered in about a week which is when it was expected to arrive. The carriage I received was identical to the OEM carriage and fit on my garage door opener perfectly. It was a "piece of cake" to swap out the old carriage with the new one, it took about 15 minutes to do, a lot easier, and cheaper than changing out the entire garage door opener. I highly recommend this part if you have a Genie screw drive garage door opener.
794 Industrial_and_Scientific_5 POS 4.0 works well easy to use.
5209 Industrial_and_Scientific_5 POS 5.0 Pretty easy to use..
3871 Industrial_and_Scientific_5 POS 5.0 I like JB Weld products. I saw this as an add-on and the price is cheaper than on my local store. I actually have half a tube left on my old one so I just bought this as reserve. You can never run out of this stuff.
6453 Industrial_and_Scientific_5 NEG 1.0 i really hate when an item is listed as coming with a battery and a spare, only to find out it came with no batteries!!!! aghhhhhhhh!!!!""
3931 Industrial_and_Scientific_5 POS 5.0 Everything ok
As far as cleaning your hands, that is a tremendous surprise -- just soap and water works. You actually do not have to worry about getting it on your fingers while using it.
6548 Industrial_and_Scientific_5 POS 5.0 This feels to be much higher quality than expected from the price. I don't have gauges to check its accuracy but I feel comfortable using this when millimeters matter.
1213 Industrial_and_Scientific_5 POS 5.0 yeah I put the stuff under and around my window when I install the window AC unit each summer. It fills the gaps created by inconsistencies in my old 1948 windows without exception!
2) Until it dries, Goop flows, alot. Therefore a thickly-applied layer may dry to a very thin layer (because most of the glue has flowed somewhere else). So, it may be essential to apply several thin layers (at intervals of 4 hours or longer) rather than one thick layer. Alternatively, you can apply a thicker layer of old thick Goop over an initial layer of new Goop. If possible, arrange the pieces you are gluing to minimize flowing, i.e., usually horizontal. For several hours, depending on the temperature etc., the glue is "repositionable" after thickening a little, that is, you can push it back into place. Unfortunately, if you use too many layers or "reposition" the glue too much, the result is not as attractive.
8864 Industrial_and_Scientific_5 POS 5.0 I bought this for shim stock for use in construction between concrete and painted galvanized steel. Price with shipping was the best I found.
4824 Industrial_and_Scientific_5 POS 5.0 The negative reviews here are based on the way that they received the items from poor shipping and such. I have tried hundreds of dollars worth of glues and epoxies. This, Devcon 2-part epoxy is by far the best hold, with the least fumes, and the most beautiful crystal clear finish. It is pure perfection!
For a small project, there are also the much smaller rolls, good for a small project.
6240 Industrial_and_Scientific_5 POS 5.0 Good!
7181 Industrial_and_Scientific_5 POS 5.0 As it says.
-Nigel
1316 Industrial_and_Scientific_5 POS 5.0 As advertised, great product
2840 Industrial_and_Scientific_5 POS 5.0 Arctic Silver 5 is the best thermal compound on the market. There are other types that might be better for specific purposes (Arctic Cramique for example), but for cooling a CPU, this is the best. I've used it extensively for quite a few computer builds as well as a few 'special projects' like replacing the thermal compound on an Asus Formula X48 mother board's Northbridge and Southbridge heatsinks.
3543 Industrial_and_Scientific_5 POS 5.0 I bought this to put under my portable swamp cooler just in case of leaks. Perfect!
There needs to be a way to swivel the spout for different filler neck angles. They also need to reduce the spring pressure on the spout and maybe add a safety lock to hold it down instead of that 50# of spring.
3319 Industrial_and_Scientific_5 POS 5.0 Fresh spark plug hole with ease, works great, good quality
5905 Industrial_and_Scientific_5 POS 5.0 Very good item,Fast Ship,
This toothpaste is not for every one be cautious of GSE liquid concentrate..
I am thrilled that it worked. I was afraid would have to get a new deck box for the kids toys which I did not want to do at all.
Best regards
1162 Industrial_and_Scientific_5 POS 5.0 I have the corded senco tool. The screws are a no brainer. The senco system is a must have is u do drywall. hardie bord or plywood/ osb.
2019 Industrial_and_Scientific_5 POS 5.0 Make all your buddies jealous with these leads! I killed my last pair and replaced them with this set. LOVE the twist-down shields for delicate work and pull them up for more robust measuring. Highly recommended for versatile jobs
1117 Industrial_and_Scientific_5 POS 4.0 While not as rough as the medium grit version (9090NA) this sanding screen is still not what I would call 'Fine'. Use this with a very light touch and make several passes though, and you can get a finished surface out of it with a little practice (I "practiced" on a ceiling joint that used to separate two rooms before moving on the more visible wall joints). I still followed up with a 320 grit sanding sponge to soften things out, but that was more like a swipe here and there across the surface. Use the sanding screen with a vacuum of some sort and you have virtually no dust at all.
We are now paying a premium price to have our previous old reliable microwave brought back to life. It will certainly be worth it to get back to efficiency and reliability!
7711 Industrial_and_Scientific_5 POS 4.0 They look nice, are well priced and shipped quickly.
6853 Industrial_and_Scientific_5 POS 5.0 its heat shrink
Saliva pH and Cancer
I learned that lesson the hard way.
6390 Industrial_and_Scientific_5 POS 5.0 Great tool and a great price. Would buy another any time.
468 Industrial_and_Scientific_5 POS 4.0 I use these rags in the garage for clean-up and light cleaning as opposed to an old wash rag or towel. These absorb must better and then you throw away - simply. The costs is very low for the amount and number of uses you get from this box. Hope this helps.
2491 Industrial_and_Scientific_5 NEG 2.0 Review for: Extech 480823 EMF Meter
6531 Industrial_and_Scientific_5 POS 5.0 Good for woodworking
They hang tight driving into wood, sharp ends, clean shiny small but solid staples.
5038 Industrial_and_Scientific_5 POS 5.0 Good product for price.
152 Industrial_and_Scientific_5 POS 5.0 Fits nicely on the 32 gallon Brute trash can.
Appliance motors now are required to include a thermal switch that will limit temperature one time or repeatable. Clothes dryers are almost always one time after 1975. The thought comes to me that an appropriate sized bar fuse might be included in strap down for this pump.
9197 Industrial_and_Scientific_5 POS 5.0 Anyone who has been around a lab or precision workshop is familiar with Kimwipes which are made from wood fiber and used to clean optics or precision mechanisms, whenever it's not acceptable to leave fibers behind as with ordinary paper towels.
4889 Industrial_and_Scientific_5 POS 5.0 A great product.
Gorilla 'wood glue' can only freeze/thaw 5 times before changing it's consistency.
Thanks for reading!
2438 Industrial_and_Scientific_5 POS 5.0 Works great, great price.
My fridge is textured too, and these hooks still do not slide. I ended up using the remaining hooks to hang 2 of my shorter, but bulkier utensils on because they seem make getting things in and out of the utensil caddy a hassle.
5328 Industrial_and_Scientific_5 POS 5.0 This Anderson stuff is well made
3392 Industrial_and_Scientific_5 POS 5.0 Good quality and price
Of course there are many other uses for this, but I can personally vouch for it's use with woods as above. It's a little more expensive than some other epoxies (look how little you get!) but I definitely trust it on a quality instrument like mine (a Fender custom shop telecaster) to last for years and years to come.
I figured a dab of JB Weld on top of the button would allow my finger to push it farther, besides making it easier to feel where the button was. If it flowed down around the sides of the button, it might never work again. I decided to risk it.
1644 Industrial_and_Scientific_5 POS 4.0 I used this item to level out the blades on my jointer. It'll do the job, but first make sure your base is level. I have a bench jointer and the outfeed base is not perfectly level. Both the infeed and outfeed bases are aluminum stock and there is enough flex in them to cause them to bow a bit between the four bolts that hold them down. No fault of this dial indicator. The jointer just has too-thin aluminum bases. However, I have to move the base of this dial indicator back and forth on the outfeed base to zero out the blades. Have to account for the base's unevenness. It gets four stars as there is no way to zero out the indicator itself. Instead, you use the fine adjustment screw on the arm to zero out. Kind of inconvenient and dumb.
2636 Industrial_and_Scientific_5 POS 5.0 These things are really sturdy, nice and compact, and easy to use
Among the the things I've used this for in recent months:
3015 Industrial_and_Scientific_5 POS 5.0 Works extremely well in my craftsman nail gun. No jambs and no misfires.
342 Industrial_and_Scientific_5 NEG 1.0 This is a turd in the salad bar. It does fit my Shop Vac straight extensions, but not my hose and not my tools.
8887 Industrial_and_Scientific_5 POS 5.0 Use this stuff to make re-useable tops to re-use my Kuerig coffee containers.
6840 Industrial_and_Scientific_5 POS 4.0 Recommended by the manufacturer, but not included with the tool purchase. Important to keep the tools lubed in order to keep them in working order.
613 Industrial_and_Scientific_5 POS 5.0 work well
Applause!
5982 Industrial_and_Scientific_5 POS 5.0 I live in a log home. It's new for me and last year there was a separation between two logs where I could actually see light through. I had it repaired on the outside by a log expert but the inside remained unrepaired so a couple of YouTube vids and I was an expert in Chinking. First item to get was Backer rod to fill the gap. I bought the 1/4 in but I think it was too small, so I went up to 1/2'.
5172 Industrial_and_Scientific_5 POS 5.0 Its a bolt - what more can I say, it worked well.
So far this mount keeps the Hi-Lift up and out of the way in the back of my bed. No damage at all to the mounts or the sidewall of the bed! There is a provision to run a lock through each screw that protrudes from this, but I have a camper shell, so I don't think anyone would know that the Hi-Lift is in there!
5919 Industrial_and_Scientific_5 POS 5.0 Another very useful tool. So simple and easy to use. Rather than spend much time trying to dig/pry/pull/work "T" bars out of the ground after cleaning out the garden, this thing worked great. Highly recommend.
9877 Industrial_and_Scientific_5 POS 5.0 for the fridge
2229 Industrial_and_Scientific_5 POS 5.0 came as described
2018 Industrial_and_Scientific_5 POS 5.0 Nice probes been a LONG time since I have NEW ones
Note that if your machine won't power on, it's likely that one or both of your tanks aren't seated perfectly. Re-seat them and try again. Also, you must lay the handle completely back to remove or replace the dirty water tank. There are two silver levers on either side of the dirty water tank that you flip out to release the tank for emptying and you flip back in to lock the clean tank in place.
1413 Industrial_and_Scientific_5 POS 5.0 Just great tape. Typical of Scotch...good quality and easy to use.
6295 Industrial_and_Scientific_5 POS 5.0 Excellent!!!!!
Well, this appliance has let us down. It has been steadily going down hill since we started using it and my wife finally asked me to send it back; sadly, 1 day after the 30 day return period expired. It seemed to take longer to reheat and warm things and pop popcorn the first week we used it, and now it is definitely running out of power. It now takes at least 3 times longer to pop popcorn than when it was new and NEVER pops without leaving a large amount of unpopped kernels (it doesn't even have the power to burn the popcorn, no matter how long you let it run). The wife complains that it can't even soften a stick of butter in a decent time. Reheating food in either plates or bowls is frustrating. What a disgusting letdown. Good old foreign and cost saving manufacturing at work!!!
Excellent project material and I will buy it again when needed.
1282 Industrial_and_Scientific_5 POS 4.0 I have owned several Hoover carpet cleaners over the years. All were very similar to this model. One had the Clean Surge option, which just floods more water out for tougher stains, and one had attachments for upholstery. As for power, suction and body build, they're all the same. This "commercial" unit is no different, sadly. The only difference with this model is the addition of a few stickers slapped on it that say "commercial," and an orange power cord instead of the black cord. Everything else is completely the same. So. I feel that this product is a bit misleading. Yes, it works very well and really gets the dirt out of the carpet and does not leave them soaking wet, BUT, so do the other non commercial models. So, if this model is higher price, do not fall for the gimmick.. buy the cheaper model. I do give this unit 4 stars because it does work very well and is actually good on hard floors, as well (so are the other models). The performance is great, it's just that it is no difference in power etc from the non commercial units.
3287 Industrial_and_Scientific_5 POS 5.0 Superb.
5452 Industrial_and_Scientific_5 POS 5.0 good product fair price
3217 Industrial_and_Scientific_5 POS 5.0 This stuff is great to have around the boat. I use this over Marine Tex as it is much much cheaper and easier to sand.
1440 Industrial_and_Scientific_5 POS 5.0 Works well, sticks well, and its very strong. We ship about a dozen packages every week and ALWAYS use the heavy-duty tape. We use it with a tape gun and have no problems and occasionally we use it straight from a plain roll.
143 Industrial_and_Scientific_5 POS 5.0 Just what we were looking for. We could not find new lids for our large, heavy duty trash cans as ours had gotten lost in a storm. We found them here and they fit perfect.
3) it was MUCH CHEAPER by far than the others
6163 Industrial_and_Scientific_5 POS 5.0 great product
8368 Industrial_and_Scientific_5 POS 5.0 Perfect for removing a bullet from a .38 caliber or larger barrel after a squib load.
1299 Industrial_and_Scientific_5 POS 5.0 Who doesn't need more VELCRO?! Not me, I now have enough for years and who knows how many projects. Got my toll device on my windshield, and my radar detector, too!
5567 Industrial_and_Scientific_5 POS 5.0 Will order more when needed. Good product fair price.
I had previously used an off-brand very inexpensive packaging tape and never had any problems with it not sticking. In fact the cheap tape was very sticky, so much so that if you pulled it off the package, it pulled the top layer of the cardboard with it. On the other hand, the expensive Scotch Super Strength tape pulls off any package with no problem. I am using 2-3 times as much tape (criss-crossing it) as I did with the cheap tape. So the Scotch ends up costing me 4-5 times as much. Overall a real reputation killer for Scotch brand products.
6011 Industrial_and_Scientific_5 POS 5.0 excellant
8623 Industrial_and_Scientific_5 POS 5.0 good grease for engine assembly,
6551 Industrial_and_Scientific_5 POS 5.0 Came with a good case to store in. I tested with known thickness items and seemed very accurate. Easy to read and easy to use. Very good unit at a reasonable price.
Packaging was good.
- Measures only AC magnetic field (mG/uT), NOT AC ELECTRIC FIELD (V/m,mW/cm2, etc.). Adding electric field measurement with decent accuracy would have added greatly to the cost.
8891 Industrial_and_Scientific_5 POS 5.0 Purchased this to make skid plates for the feet of some outdoor benches I made. Wanted something to withstand the wear and tear when dragging the bench on concrete. This works perfectly so far. It's only been a few months but a quick check before putting them away for the winter shows almost no wear. Easy to cut with a table saw and drills easily with conventional twist drills.
9269 Industrial_and_Scientific_5 POS 5.0 This was a good deal and shipped fast.
> Single use, unless you clean the straw very well. Would be nice if a second straw was included.
8080 Industrial_and_Scientific_5 POS 5.0 Fantastic stuff...maybe a little TOO fantastic, given that it took forever to modify it for my purposes, hah.
6724 Industrial_and_Scientific_5 POS 4.0 Good basic shears for the price.
Diameter is exact, which was critical to my use.
3253 Industrial_and_Scientific_5 POS 5.0 These are good little thermoters and came pre calibrated.
665 Industrial_and_Scientific_5 POS 5.0 5 stars. best tape around
Used with greywater plumbing from the washing machine.
4265 Industrial_and_Scientific_5 POS 5.0 I will not purchase any toothpaste with Whitener in it... Whitener softens the enamel of the teeth as the whitener is peroxide. So I purchase this Colgate Total without whitener, and it is now harder to find a toothpaste without whitener. Amazon is the ONLY place I can find my Colgate Total without any whitener. So... I will always purchase my toothpaste from Amazon. Thank you Amazon for having this toothpaste available. Please always keep it in your list inventory of toothpastes.
6708 Industrial_and_Scientific_5 POS 4.0 These come individually wrapped so each one is in its own sterile package. These are hard to find items esp. at this price. I highly recommend them.
30GHz-300GHz EHF
1396 Industrial_and_Scientific_5 POS 5.0 Used this tape for years. Will continue to do so. Quality, tough, stays on. Highly recommend.
Many people say ArcticSilver 5 is best. But what does "best" really mean? Some people change their compound every year or two. I'd rather have something slightly less efficient which lasts a long time. My MacBook Pro (from 2011) is a real pain to change the compound. But even on computers where the compound is "easy" to replace, I'd rather not have to bother.
8152 Industrial_and_Scientific_5 POS 5.0 High-quality material highly recommend.
4. Hard shell padded case.
- wait the time directed on the can before getting anything wet or pressurizing your system with air
If you ask for 90% power, you get 90% power - all the time.
Unfortunately, this microwave comes with a few annoying features. The hardware tolerances are a bit too coarse, and the door fit, and the body molding, tend to be mismatched in different places. The door latch makes a huge sound when opening and closing, and if the microwave is not bolted to the counter (mine is not) opening and closing the door always moves the microwave. The fan and the motor are very noisy. By contrast the finished beep is very low and timid, to the point that sometimes I do not hear the beep. I know that it has finished when the noise stops, particularly since the finished beep does not repeat, as most other microwaves do.
6164 Industrial_and_Scientific_5 POS 5.0 good product
For materials other than metal, particularly for rigid plastics, other epoxies are usually better than JB Weld. Some epoxies are clear, or white, or specialized for particular purposes. For example CLEARBOND H-3S Clear Strong Epoxy Adhesive Syringe - .85oz
8057 Industrial_and_Scientific_5 POS 5.0 As advertised
6000 Industrial_and_Scientific_5 POS 4.0 I bought this for nursing school and it worked great until I was in a room with a bunch of people talking. It looks and feels great and no body thought it was a cheapo. I ended up getting a digital one, it may not of been this stethoscopes fault, I'm a veteran and was exposed to some super loud stuff I may be hard hearing.
695 Industrial_and_Scientific_5 POS 5.0 When you want the best this is it!! It stretches nicely without breaking and holds well. It also does not come unraveled in a few weeks like the cheep import stuff does.
4496 Industrial_and_Scientific_5 POS 5.0 Excellent did the job Thanks
1737 Industrial_and_Scientific_5 POS 5.0 Really Strong glue. Worked well.
2734 Industrial_and_Scientific_5 NEG 1.0 it works took forever to get
189 Industrial_and_Scientific_5 POS 4.0 As advertised
1197 Industrial_and_Scientific_5 POS 5.0 The only thing I was worried about when I bought this product was whether or not the back side would be sticky enough for what I needed it for. It definitely proved to be very sticky, in fact its much better than expected. 5 stars!
Go with the Elite and be happy or buy these and you are likely to be sorry.
PREPARATION!
9709 Industrial_and_Scientific_5 POS 5.0 FAST SHIPPING, GREAT PRODUCT
931 Industrial_and_Scientific_5 POS 5.0 Built a large wood racing track and they worked prefectly
7668 Industrial_and_Scientific_5 POS 5.0 The only gripe I have about this lift is the handle to pump it is two peices. I'd love to have a single piece so I don't have them falling apart while I'm trying to lift something. Very very minor but that's the only gripe I have.
6468 Industrial_and_Scientific_5 POS 5.0 Accurate. Measures my bullet cases well for reloading. Much less expensive than reloading equipment branded ones. Good quality. Easy to zero.
3357 Industrial_and_Scientific_5 POS 5.0 this stuff is awesome, good value in this size too
3679 Industrial_and_Scientific_5 POS 5.0 Water goes in one end and out the other. Just like a hose should. it is fairly soft and easy to use.
5116 Industrial_and_Scientific_5 POS 5.0 got these for doing a conversion on an old outboard motor. they are good quality. works great. would recommend to others. would buy again.
3661 Industrial_and_Scientific_5 POS 5.0 Tough, reliable and pretty much just Excellent.
1454 Industrial_and_Scientific_5 POS 5.0 Whenever I try to save money with cheaper packaging tape, I come to regret it. This is the good stuff.
1 tear later: I discovered rotten wood outside of my garage. I first applied Wood Filler. Knowing I would not paint it soon I used this strong duct tape over the wood fill. I reside in southern Texas where the average humidity is 80%. We have decent rain and frequent large storms. This Scotch Tough Tape is still perfectly attached to the filler and wood. No ends coming up. No wrinkles. I am completely sold on this superior tape. You will not regret buying this Scotch tape.
Gorilla tape is just one of those items I always make sure I have on hand in case I need it. If you're curious about trying out a new kind of tape, you've found your best option.
7560 Industrial_and_Scientific_5 POS 5.0 The Neiko step drill is one of those tools that once you own it, myriad applications previously not considered magically appear. Like any step drill, it is a tremendous cost saver when compared to purchasing individual bits of equivalent diameters. Yet, it has a few advantages over conventional bits as it acts as a nice deburring tool in certain circumstances. It can also be a great time saver when installing electrical connectors and switches in electronic enclosures or automobile dashboards. You don't have to constantly switch bits.
This Sonicare model differs from other more expensive models in that it does not have a charging base. It uses AA batteries and we change them out when needed. I actually like this, because it takes up less space on my bathroom counter.
2759 Industrial_and_Scientific_5 POS 5.0 Works as described.
3131 Industrial_and_Scientific_5 POS 4.0 I used this to make a leak proof seal when I added a drain plug (Dorman 65241 AutoGrade Oil Drain Plug) to my transmission pan. I had read many stories of these drain plugs leaking after install, and saw a cure for this was to use Anaerobic Gasket maker.
541 Industrial_and_Scientific_5 POS 4.0 IT doesn't make stuff weight any less, but it does give you freakish gorilla like arm length with which to get a better grip. Plus no sharp edges/splinters into your fingers.
Shank Size Across flats: 7/16
1801 Industrial_and_Scientific_5 POS 5.0 Great holding power but it does expand beyond the fix so get ready to remove the excess later.
4203 Industrial_and_Scientific_5 POS 5.0 Works as needed.
8037 Industrial_and_Scientific_5 POS 5.0 Bar was to specification and it served my needs.
4551 Industrial_and_Scientific_5 POS 5.0 High quality and great price! Highly recommend!
.... ... ...... .... .... ... ... ..
4766 Industrial_and_Scientific_5 POS 4.0 A quality fastener, that will certainly work for all kinds of projects.
9670 Industrial_and_Scientific_5 POS 5.0 I suffer from chronic venous leg ulcers and my home care nurses began putting these on my legs several years ago. After I became stable and the nurses no longer came around I continued to buy and use this product with great success. I cut them to fit to just under my knee and then sew one end up to use them as compression socks because the open end would always ride up and choke my ankle. My Doctor was very impressed with how the Tubigrip "socks" kept the swelling down and with how they kept the ulcers in check. I buy two or three rolls a year. Way cheaper than Doctor visits. I highly recommend them.
I'm much smarter now and I never work on electrical wiring unless I have this Non-Contact Voltage Tester with me.
9254 Industrial_and_Scientific_5 POS 4.0 good variety
8336 Industrial_and_Scientific_5 POS 5.0 As described and sent to survive the carriers.
2298 Industrial_and_Scientific_5 POS 5.0 Fits the containers perfectly!
5730 Industrial_and_Scientific_5 POS 5.0 Excellent!
808 Industrial_and_Scientific_5 POS 5.0 Bought these for putting grommets in a climbing chalk bag I was making. They are much better than the cheap harbor freight ones I have used in the past. Make sure you really get them locked in, we had a couple come loose just because we didn't hit them hard enough.
Seriously, if you need this stuff you already know what it is and how highly recommended it is by many techs. It transfers heat from a chip to a heat sink. It happens to do this as well as or better than many competitors.
You can easily find a less expensive microwave - quality mileage will vary.
3350 Industrial_and_Scientific_5 POS 5.0 I needed to replace the bathroom caulks since the old ones were getting moldy. I have a caulk gun as well but I like this one more convenient (Easy to use and offers more precision). If you carefully remove all of the pre-existing caulk and let it dry for 24 hours before exposing it to water, then you are good to go. I have no previous caulking experience and I am a miserable DIY guy. If I can do this then every one can do. It has been over a month and I noticed no leak or cracking. Will update the review if it happens but (touch wood) so far so good.
7755 Industrial_and_Scientific_5 POS 5.0 good products
1461 Industrial_and_Scientific_5 POS 4.0 Adhesive works great. However, had a hard time with self life. Could not use more than half of it because it dried out in the bottles.
I hope Sashco does not change the formula...it is perfect as is!
9997 Industrial_and_Scientific_5 POS 4.0 They're cotter pins. A lot for cheap. Not the same strength and quality as let's say the one that would come with a tie rod that you buy. But I don't think these usually need to be super strong in most applications, just stay in place. If you need a super heavy duty one look elsewhere.
3313 Industrial_and_Scientific_5 POS 5.0 Gardner wire nuts are quality wire nuts at a very reasonable price. I like the color coded sizing. I would recommend.
8749 Industrial_and_Scientific_5 POS 5.0 As advertised
When is a standard metal drill bit better?
2125 Industrial_and_Scientific_5 POS 4.0 For use while picking up the wet stuff. If you leave a filter on the vac will not fit and you will get wet filter.
9923 Industrial_and_Scientific_5 POS 4.0 03/06/2015. Great spare cuff. Because these cuffs are factory sealed and you cannot identify when they fail (all such things do in time) it's prudent to have a spare unit to test and compare when BP readings begin to get erratic. I check my BP daily every morning and keep a running track with the "Lose It!" app on my iPhone 5s. My old OMRON BP machine (HEM-780RELN2) was becoming very erratic and I have replaced it with a OMRON BP791IT model that uses the same cuff. Testing the old model with the new cuff isolates the failures to the BP machine, not the cuff, so I am able to assure that replacing it was a prudent action. Plus now I have two spare cuffs for futures use, as needed.
4127 Industrial_and_Scientific_5 POS 4.0 Good table. The metal top is a little flimsy and dents easily.
It works great!
498 Industrial_and_Scientific_5 POS 4.0 Great shop towels. Marked down one start because the quantity was low considering the price.
-- wiredweird
5792 Industrial_and_Scientific_5 POS 5.0 This tape has saved my @$$ more times than I care to count. I work at outdoor farmers & artisan markets, and I am never without a roll of this. LIFESAVER.
8802 Industrial_and_Scientific_5 POS 5.0 Just love looking at it and imagining its possibilities! Very good quality! Great price!
480 Industrial_and_Scientific_5 POS 5.0 ok
1) The light weight is great for long shifts with it draped around your neck.
~ It is cheap?
9775 Industrial_and_Scientific_5 POS 5.0 as advertised
3695 Industrial_and_Scientific_5 POS 4.0 This hose was purchased to have a hose available with us for camping. I pull a horse trailer that does not have living quarters, but it does have a water tank in the tack room. It came with a green hose that I never liked. This looks and feels much clearer. The plastic on the female end has knurled edges that make it easy to tighten (and loosen). The only down side was that it is a 1/2 inch hose. That makes the water come out rather slow, but it has not been a problem.
6831 Industrial_and_Scientific_5 POS 5.0 I owned a Fluke voltage tester and loved the quality & reliability. Now when I needed a tone and probe product I knew I had to get the PRO3000. I have a Sperry (aka Gardner Bender) ET64220 that had no power to trace wires through drywall. It was good for small telephone wiring kinda stuff. Well why waste your time with the Sperry when the Fluke does it all. Believe me it does everything. I have no problem using the probe through 5/8" thick drywall to locate NM wires. The tone (either continuous or pulsating) is LOUD. Takes the guess work out. I've also used it's continuity function and that worked great too. The quality and reliability of this product has made me become a lifelong Fluke customer from now on. Don't waste your money experimenting with other products stick with Fluke and you'll be happy. Highly recommended!
7794 Industrial_and_Scientific_5 POS 5.0 As advertised.
would like to get more
923 Industrial_and_Scientific_5 POS 4.0 worked great for use in my greenhouse.
570 Industrial_and_Scientific_5 POS 5.0 Great product
7256 Industrial_and_Scientific_5 POS 5.0 I bought this for a custom cutout on my new computer case, and it was very easy to cut to size with a dremel. The plastic protectent sheeting on both sides ensures it is scratch free until you are ready to install it. This is not what I would normally expect to find at Amazon, but with prime shipping they were by far the best price on this part.
674 Industrial_and_Scientific_5 POS 5.0 Great tape, one of only tapes I would recommend for actual electrical projects. I buy the 10pks of cheap black "electrical tape" for other things, but this is the only tape I will use for actually wrapping wires. It stays stuck, and stretches to fit well, without "creeping" back or peeling over time. Works very well in range of temperatures
1262 Industrial_and_Scientific_5 POS 5.0 These support jacks are a great help to hold boards and sheeting to the ceiling while fastening.
If you like short reviews - stop here!
8555 Industrial_and_Scientific_5 POS 5.0 Sturdy. A little hard to open, but that's better than too easy to open.
9372 Industrial_and_Scientific_5 POS 5.0 Every turner will tell you a different story; all of them good; about how and what they use to make their stuff. I have three live tail stock centers and I use this one the most often. I can make really close cuts and parts as it allows me to move the tool to within 45deg of center. It is also great for centering stock that has been bored out, i.e. pepper mills.
Went on easily. Gave it time to cure and the bond is still rock solid despite weather changes and large amounts of vibration.
5291 Industrial_and_Scientific_5 POS 5.0 as described
8256 Industrial_and_Scientific_5 POS 5.0 Good item
8862 Industrial_and_Scientific_5 POS 5.0 Product as advertised
Original review: So I drive a 15 year old F-150 I lovingly refer to as Shaniqua. Dont ask. Well one of her running boards has been failing at the point where it attaches to the frame. I thought what the heck, for $7, whats the worst that can happen? It freaking works!! I am stunned ! Put my whole 211 lbs, shut up, it is so 211, if I say it is, on the thing and it holds! Damn. Now admittedly, in normal use you aren't putting all your weight on because you're stepping up, but if it holds until spring, Im happy. (breaking down and buying a new truck). This stuff is incredible. Highly recommend. Thanks for reading
4453 Industrial_and_Scientific_5 POS 4.0 I installed this valve and it's working well. I've got a Hydromatic pump in my sump pit and they're a good combination. The only negative about it is that it doesn't come apart to be serviceable with a new rubber flapper some day. It's a throw-away item when it doesn't really have to be. It's still nicer than anything sold at Lowes.
8427 Industrial_and_Scientific_5 POS 5.0 This take is fantastic. I got it to wrap the edges of a folding camping stove that had very sharp edges. It made the stove safer and stands up to the heat just fine.
8197 Industrial_and_Scientific_5 POS 5.0 Stout but still bendable, it worked perfectly for my use which was to build a VHF antenna (ham radio).
2205 Industrial_and_Scientific_5 POS 5.0 Just as advertised!
5914 Industrial_and_Scientific_5 POS 5.0 I didn't think I would like it as much as I do, but I love it. At $4.50 a post, you can't afford not to buy this. I gave it 5 stars simply because I already made my money back using it
6936 Industrial_and_Scientific_5 POS 5.0 Good quality parts. No garbage threads, no poorly machined flats, etc. Quality product for a fair price. Steel appears to be a high quality stainless.
8543 Industrial_and_Scientific_5 POS 5.0 Seem like a well made product.
842 Industrial_and_Scientific_5 POS 5.0 The last honest gas can. At least for California. Oddly enuf in California it is very hard to find a gas can that does not have one of those infernal safety nozzle things that are almost impossible to make work right. This can is basically a normal can with a removable funnel and a spring actuated cap. Easy to fill and open. If you can find one in California buy it, otherwise buy one here because all you will find are those damned plastic ones that you can't fill.
9561 Industrial_and_Scientific_5 POS 5.0 Good quality. Does exactly what its supposed to do. I have no complaints and would definitely recommend this product. The only thing I would change if I could - and this is NOT a complaint, its a personal preference - would to be to make it slightly narrower and slightly taller while retaining the 14 gal size.
2077 Industrial_and_Scientific_5 POS 5.0 This thing is fantastic for woodworking - It works as described. It provides the precision I need and I enjoy that it's marked in fractions. If you're looking for a reasonably priced dial caliper for woodworking, this is your ticket.
2266 Industrial_and_Scientific_5 POS 4.0 Excellent product to solve different problems. Product seal should be protected from environment (air)
2680 Industrial_and_Scientific_5 POS 4.0 Keeping my cpu 10 degrees cooler than before.
27 Industrial_and_Scientific_5 POS 5.0 Use this in my woodshop, works great for facing table saw jigs for grip traction of work pieces. Use it for shop made sanding blocks, will by more when I run out.
2846 Industrial_and_Scientific_5 POS 4.0 It works well and is at a good price. Looking to purchase a bigger stand.
234 Industrial_and_Scientific_5 POS 5.0 Any old bag will do, until a cheap one breaks apart as you're trying to change it. When it comes to vacuum bags, you usually get what you pay for. Although these are not the cheapest I could use in my Shop-Vac, they're durability makes them worth the extra couple bucks.
So.... it's a pretty good tape to pack with and have confidence that it will hold a box together.
3587 Industrial_and_Scientific_5 POS 5.0 We have used many rolls of the Duck brand packing tape.
2909 Industrial_and_Scientific_5 POS 5.0 Multi-colored test leads with alligator clips. Not real big or heavy duty, but did the job for me.
7093 Industrial_and_Scientific_5 POS 5.0 Perfect for removing a bullet from a .38 caliber or larger barrel after a squib load.
7703 Industrial_and_Scientific_5 POS 5.0 I like work good Thanks
269 Industrial_and_Scientific_5 POS 5.0 These are awesome!!!!!!! After scratching up my wood floors by using subpar stick on pads (that would just collect dog and cat hair and ultimate fall off).. These are very secure. Now.. If they wear out, how will it come out and will a new one go in without slipping out of the existing hole. I don't know. But I do know that they allow the furniture, dining room chairs and table to slide without complaint and WITHOUT SCRATCHING YAY!! :)
The only thing I could see that might be an issue in the long run is the wheel is just dry bare plastic riding on a dry bare metal shaft.. Might want to take the wheel off and pack it with grease, just to keep the friction down to make it last longer.
4072 Industrial_and_Scientific_5 POS 4.0 Thank you !
9728 Industrial_and_Scientific_5 POS 4.0 Not sure if good or bad, but this brand takes a bit longer to set. But once dry, it's as good as any other super adhesive in its category.
Ive posted a price-comparison chart in the photos accompanying this review.
8136 Industrial_and_Scientific_5 POS 5.0 Aluminum rods at a reasonable price
6188 Industrial_and_Scientific_5 POS 5.0 These work fine for my application. Price is MUCH better than other competing products.
5492 Industrial_and_Scientific_5 POS 5.0 Gardner Bender GSW-20 Electrical Toggle Switch...
3 Industrial_and_Scientific_5 POS 4.0 As advertised
2209 Industrial_and_Scientific_5 POS 5.0 This is a very good product. Holds very well.
57 Industrial_and_Scientific_5 POS 5.0 Works great on most everything. Glued some new shelf door holders in a fridegerator that was craked and kept falling off. Not anymore. love it
So I will be purchasing 3 more of these. I may even buy a 4th just because I like the safety aspects of this better than the old non-carb container I have.
1211 Industrial_and_Scientific_5 POS 5.0 Have a curb side mail box which is now over 10 years old and the tape around the interior of door was in terrible shape. Purchased this tape and it is exactly the size you need when replacing it. Super easy to use--just measure how much ya need and cut it. Remove the backing and apply. This is perfect for ease of use and not so thick you have trouble closing the door after applying the new tape.
2815 Industrial_and_Scientific_5 POS 5.0 This is the product many in the "know" recommend. It surpasses most factory applied products of it's nature. Live and learn.
Doesn't hold up in moderately high temperatures
3151 Industrial_and_Scientific_5 POS 5.0 The stuff works great. I used this to help make my kayak water tight where the screws and fasteners go into the hull. I highly recommend this to other kayakers to help make their rigs water tight.
5234 Industrial_and_Scientific_5 POS 4.0 Can purchase these for .75 cents at the local hardware store, so over priced, the Hilman Group makes a quality product from purchases in the past.
I use it for many different things. Because this is liquid, I put it on anything I want to protect. Works perfect on bare wires. I have used it as cushioning between two objects. I have even put it on sharp edges to protect from cuts. This takes a few layers but turns out nice. Once it dries, it is nearly impossible to get it off and forms, what feels like, a soft rubber film.
8036 Industrial_and_Scientific_5 POS 5.0 Good.
7804 Industrial_and_Scientific_5 POS 5.0 Delivered as advertised
8067 Industrial_and_Scientific_5 POS 5.0 Just what i needed, measurment was correct and welded up nice
-When my desktop telephone decided it needed to perpetually flash its "message waiting" LED (even when there were no more messages): a discretely placed piece of Gorilla Tape permanently and opaquely covered the annoying light.
5033 Industrial_and_Scientific_5 POS 5.0 These cut-off wheels are what you'd expect from Metabo. They cut well and fit the Metabo tool perfectly. I've punished them with 4" cast iron sewer pipe, and they performed beyond my expectations. The diameter wears down quickly with such a punishing application but at no faster rate than the much more expensive competing products. If you are cutting a lot of heavy gauge steel and need the full diameter wheel, then this bulk pack is the way to go.
4669 Industrial_and_Scientific_5 POS 5.0 Holds well, used 3M 4298 Adhesion Promoter prior to attachment.
8121 Industrial_and_Scientific_5 POS 5.0 This was just incredible. I use it to hang a windsock in the back yard. Does great.
The good:
5693 Industrial_and_Scientific_5 POS 5.0 Works very well in a horizontal configuration.
6344 Industrial_and_Scientific_5 POS 5.0 Good so far.
7796 Industrial_and_Scientific_5 POS 5.0 Just what I needed.
5408 Industrial_and_Scientific_5 POS 5.0 Quality product does the job well
This machine cleans very, very well. My son's apartment has old, cheap carpet. He also has a geriatric dog who occasionally has accidents. I took this machine there and cleaned the entire carpet. OMG, the dirt that came out of that carpet was scary but the result was astonishing. It looked fantastic - even in the high traffic areas in front of the door and near the kitchen. It looked as good as the carpet in the closets, which see almost no traffic or wear. There were a couple of old stains that I pre-treated with a spray stain remover and they came completely out.
The dirty water tank is what I'm most impressed with. The removable lid covers the entire top of the reservoir. That means when I remove the lid to empty and clean the tank, I can easily clean every area under the kitchen faucet. Believe me, the water is waaaay dirtier than one would ever expect and the tank can get very gunky. Being able to run water directly over every part of the tank makes this chore much, much faster. This is a big deal because most rug cleaners are not designed to be easy to clean and thus maintain. Hoover put a lot of thought into this machine with regard to ease of use and maintenance.
2239 Industrial_and_Scientific_5 POS 5.0 Real sticky stuff, brother. Used on my foam RC planes.
9297 Industrial_and_Scientific_5 POS 4.0 Box is worthless, but I remove the two dividers and glued them in place, sorted the clips and refilled the box. Ok now.
8825 Industrial_and_Scientific_5 POS 4.0 WORKS AS ADVERTIZED...WORKS AS EXPECTED
2551 Industrial_and_Scientific_5 POS 5.0 great for foam planes
5078 Industrial_and_Scientific_5 POS 5.0 worked great for our screen door frame. make sure you have the correct sized splining tool!
596 Industrial_and_Scientific_5 POS 5.0 best electrical tape I have ever used period
4628 Industrial_and_Scientific_5 POS 5.0 PERFECT
6585 Industrial_and_Scientific_5 POS 5.0 works good
7352 Industrial_and_Scientific_5 POS 5.0 very fine quality product, product exactly matched the description of the product, worked like a charm on my electrical connections. love it.
4365 Industrial_and_Scientific_5 NEG 2.0 I'll say that yeah, this tape does work but there are for sure much better tapes out there. This tape is not the clearest tape and is definitely thinner than average. It does come off the roll easily enough, but look out for static cling because this tape is so light it will double back on itself if you aren't careful. Also note that when using a tape gun, this tape will have a lot of extra small little pieces coming off from the teeth on the gun.
630 Industrial_and_Scientific_5 POS 5.0 This is the same tape they have made for the last 40 years I . I have used it for that long and it is great stuff for home or job it's strong and seals tight the other one is scotch 88 it's the heavy version of this and it's great to. This is not that crappy Chinese tape this is far stronger and won't rot in the sun we used it on boats in florida and it stays put .this is real electric tape not pvc .
9675 Industrial_and_Scientific_5 POS 5.0 EXCELLENT
This is very strong duct tape! As I mentioned above, it is difficult to tear and it seems to be more durable than the other brand I use.
These fit the project I was working on well and exactly as expected...
Are they worth the price, sure but look else where.
1027 Industrial_and_Scientific_5 POS 5.0 Does what they are supposed to do
So after receiving, trying and using this, I am VERY happy with this Scotch Super Strength Packaging Tape 3850-6. It is User Friendly! It is STRONG, It is Tenacious -- I affixed a 10 inch length of the tape from a roll of tape hanging onto a fixed object the other day and the roll did not drop down to the floor from its own weight -- the tape stuck and even the exposed part was just as sticky as ever a few days later. I left a used roll of tape un-tabbed for a few days in a warm kitchen - the cut end of the tape was retrievable without tearing and without my losing any portion of the tape when I pulled it open. Bravo!
7397 Industrial_and_Scientific_5 POS 5.0 works great, but wear rubber gloves can be a little messy
523 Industrial_and_Scientific_5 POS 5.0 I needed to make larger holes in steel sheet metal. Traditional drill bits bind up in the hole when you get close to fully drilling through the hole. Adjustable circle hole cutters and expanding bits can be dangerous if used free hand, and sometimes even used in the drill press. All of these types can twist your wrist badly if you are using them free hand.
6153 Industrial_and_Scientific_5 POS 5.0 Solid terminal, the wires crimp on solidly, and I have no worries they are going to slide off. They fit the terminals of items securely and snugly. For the price vs quantity, these can't be beat.
* Surface needs to be damp for the glue to work
9594 Industrial_and_Scientific_5 POS 5.0 excellent
1981 Industrial_and_Scientific_5 POS 4.0 Works fine with clamp on current meter.
It has a hanger attachment
6120 Industrial_and_Scientific_5 POS 5.0 they hang nice, although pointy compared to my ones with rubber tips
1219 Industrial_and_Scientific_5 POS 4.0 This unit is good. It would be great if 1) the hose never clogged and 2) adapters for mating the 1" hose to 1-1/4" and other sizes were readily available. Those cut to size adapters don't work - wasted $10 on one.
5409 Industrial_and_Scientific_5 POS 5.0 A good thing about this is that the tube has not gone bad even after opened several months ago so it makes it a more economical product then many of the other glues I have used
3425 Industrial_and_Scientific_5 POS 5.0 We used these for Giant Beer Pong. Painted the interior and rim white to look like big red solo cups. Good quality - very sturdy.
- RF Animal Identification = 125KHz(U.S.) and 134.2KHz(Intl) (penetrates mud, blood, water)
4150 Industrial_and_Scientific_5 POS 4.0 worked as promised
4874 Industrial_and_Scientific_5 POS 5.0 Worked great!
522 Industrial_and_Scientific_5 POS 5.0 This Irwin step-drill was reasonably priced and has lasted about the longest of any I've had in this size range. I keep a bit of this size in each of my drill storage cases and since this 1/8" to 1/2" size bit is also the one I tend to use most with my cordless drill, I keep one in the nail set holder of my tool pouch, so it's always ready to go. It is just the right size to make a hole in metal enclosures for the draw stud of my 1/2" Greenlee manual KO punch, which I will often use to make the hole for the draw stud of the larger KO punches, so it gets used quite a bit for that. With this size bit, over time I usually seem to end up snapping off the 1/8" tip then grinding it down to a new larger point so I can continue to use it. So far, this bit has managed to keep its tip, so not sure if it's just luck or if maybe there is something to the titanium nitride coating after all, but either way I'm happy with this step-drill and will buy again.
I will never use another thermal compound for my CPUs.
7586 Industrial_and_Scientific_5 POS 5.0 Use these with my Buchanan C24 crimper for all of my grounding in device boxes. Saves both on space in the box, and from adding pigtails. There may be other crimpers that are code-compliant to use on these, but I have yet to see one that comes anywhere close to making the quality crimp that the C24 does.
4283 Industrial_and_Scientific_5 POS 5.0 Vey functional.
2634 Industrial_and_Scientific_5 POS 5.0 Finally some help with carrying my groceries up to my apartment, whats cool is it doubles as a 2 wheeler
3143 Industrial_and_Scientific_5 POS 5.0 Works as advertised
I would get this again and recommend to anyone .
Bought it for a prototype of a n enema, so you get the idea.
5558 Industrial_and_Scientific_5 POS 5.0 Work great.
5857 Industrial_and_Scientific_5 POS 5.0 DOES THE JOB
If i was going to offer ANY criticism at all it would be that the drawers and door open a little TOO easily, which was a little bit of a pain during assembly. I wish it took a bit more tension to open them, but on the plus side the drawers and cabinet all lock so that's a bonus. It also steers and pushes very easily and has locking casters on the back wheels. You could easily move a couple HUNDRED pounds at a time with very little effort.
Be absolutely sure to install the kit with the fill valve as perfectly vertical as possible. If it is not vertical, the check valve will not work correctly and you will lose fuel, as much as 60 gallons if you don't notice the issue.
Silicon Glue: Silicon glue is best for glass, and when you want a truly flexible connection (for example, to absorb vibrations). It is a better choice for general household use on glass, plastic, and metal when you do not need the maximum possible strength. It is safer than Goop, and cleanup is easier. Like Goop, silicon glue takes days to reach reasonable strength, weeks to reach maximum strength. For example: GE Silicone II Household Glue, 2.8 oz
8902 Industrial_and_Scientific_5 POS 4.0 Everything you might expect: solid, strong sheet, smooth surface, uniform color, dimensions correct. Although packed reasonably well, the sheet I got is slightly warped - not enough to disqualify it for my application, but enough that I'll have to work around its not-quite-flat shape.
4320 Industrial_and_Scientific_5 POS 5.0 Great
5. Extra battery.
3051 Industrial_and_Scientific_5 POS 5.0 Great screws. They self-tap and hold very well.
6866 Industrial_and_Scientific_5 POS 5.0 coll
1) Use distilled water, especially if you have hard water. A build up of scale/mineral deposits will kill a steam cleaner very quickly.
Now, what are you planning on using this for? I bet I know. It is the only reason most individual consumers ever would buy it. I bet you have a bad PS3 or some other component you need to fix on the cheap. This isn't the time to save the money. It is the labor you will have to put into the job and the cost of the component that are important.
550 Industrial_and_Scientific_5 POS 5.0 LOVE IT !!!!
8269 Industrial_and_Scientific_5 POS 5.0 This was packaged well and just as expected.
5122 Industrial_and_Scientific_5 POS 5.0 Over that past year I have ordered and used many different Anderson fittings. This is one of them. Without exception, I have found Anderson fittings to be top quality. No fitting has ever failed me. The threads have all been excellently cut and are well within specification for NPT design. When wrapped with PTFE and tightened properly (not over-tight..) they never leak. The barbed shank is longer than some others and holds tightly to hose. Once again, when clamped properly there will never be a leak. The hex shape on the exterior is perfect for use with a typical open-end wrench. Nicely machined and finished.
590 Industrial_and_Scientific_5 POS 5.0 This is awesome electrical tape. Life is too short to save 50 cents on cheap tape.
We have this check valve on each of our sump pumps. Excellent product.
6314 Industrial_and_Scientific_5 POS 5.0 Great product, just as described
3245 Industrial_and_Scientific_5 POS 5.0 exactly as advertised. excellent quality.
7396 Industrial_and_Scientific_5 POS 5.0 Not much to say about this stuff...it works great. As others have mentioned the brush is too large for small applications...that will become obvious pretty quick I would think. I've improvised with cotton swabs, a twisted up paper towel, toothpick, tiny paintbrush, etc.
4140 Industrial_and_Scientific_5 NEG 2.0 If all you want to do is pick panels straight up off the floor then this is ok. But any deviation from vertical the gripper loses its grip and the panel comes crashing down.
7997 Industrial_and_Scientific_5 POS 5.0 Can't really get these wrong.
2457 Industrial_and_Scientific_5 POS 4.0 Worked well
Loctite Blue is the perfect product to make sure that there is a no slip connection between bolts and their receivers, and it is outstanding for use with firearms as the stuff withstands the beating and vibration without a second thought. A little goes a long way, so use sparingly.
9724 Industrial_and_Scientific_5 POS 5.0 Super glue, super cheap. And perfect portion sizes.
508 Industrial_and_Scientific_5 POS 5.0 Works like a charm on tougher metals than the TiN coated bit.
4672 Industrial_and_Scientific_5 POS 5.0 Great product...highly recommend
4" Straight Pegboard Hooks (count of 2)
The construction is much better - This one was almost separating at the edges and pink fluid was leeching out of the sides onto a paper towel once it was full
Or the rubber tips of my sunglasses that were going bad from excessive use. I dipped the tips in the liquid and let it air dry over night and voila!.
7462 Industrial_and_Scientific_5 POS 4.0 I bought this FML27 bulb for my Sharper Image "Bright as Day" lamp and it does work in that lamp. The lamp has a dimming feature, but the Eiko bulb doesn't do a good job with this - it will dim somewhat and then go out at lower settings. As I never used the dim feature, it did not matter to me. The light from the bulb is fine and matches that of the original that Sharper Image provided.
The quality workmanship of this product is obvious: sharp, finely machined, highly visible markings.
95 Industrial_and_Scientific_5 POS 5.0 These are good quality abrasive chop saw wheels that seems to outlast cheaper saw wheels from Harbor Freight and others. I will buy again.
AD2
I keep a supply of all sizes handy at all times.
I would like to have this store had the opportunity of international shipping and delivery cost is not for every instance of a One unit of weight
6929 Industrial_and_Scientific_5 POS 4.0 Good even finish - smooth threads - no slack on bolts when screwing on - no burrs noticed on over 30 used.
9285 Industrial_and_Scientific_5 POS 5.0 This was a good deal. I bought them for the shop and have needed them more than I thought I would. lot's of sizes and at a good price.
3213 Industrial_and_Scientific_5 POS 5.0 I LOVE PC PRODUCTS!! always my first choice!!
I disassembled and colored bottom slide of each with white now easy to see if a switch is turned on.
6997 Industrial_and_Scientific_5 POS 5.0 Works so far. Can't beat the price.
47 Industrial_and_Scientific_5 POS 5.0 Thanks this is just what I needed
3130 Industrial_and_Scientific_5 POS 5.0 Extremely versatile and easy to use. I have some aluminum interfaces I sealed 15 years ago that are still holding strong.
2962 Industrial_and_Scientific_5 NEG 2.0 Never will buy this again.
SOME ORGANIZATIONS REVIEWING
I actually used the Insta-Set in combination with this glue over a cut I had on my thumb, ( not sure it's "technically" recommended) and got really warm, then all of a sudden, the glue was hard. Stopped the cut from opening up and I could continue my day. AMAZING! I will never go without this glue or the Insta-Set.. It will always be in my tool kit. I can't wait until next time I need to use some super glue for something.
* You must read the directions!
8988 Industrial_and_Scientific_5 POS 5.0 Arrived on time works as expected.
8431 Industrial_and_Scientific_5 POS 5.0 I've been using this tape for about 2 months on various projects... it's easy to work with, peel off backing is easy to remove and the stickiness of the tape is very good - overall, performs as I had hoped. Good product if you need such a thing!
2761 Industrial_and_Scientific_5 POS 5.0 Very good product .. i like it .
6196 Industrial_and_Scientific_5 POS 5.0 Exactly as ordered and came in VERY fast...
2664 Industrial_and_Scientific_5 POS 5.0 This stuff stays crunchy, even in milk, but it is difficult to remove from between your teeth, even with floss.
Recommend Highly-get some practice..
6258 Industrial_and_Scientific_5 POS 5.0 Impressive!
9791 Industrial_and_Scientific_5 POS 5.0 Works great on my portable band saw that I built a platform for. My portable band saw is NEVER used freehand. It ALWAYS sits in the gadget I welded together to mimic a stationary vertical band saw.
7197 Industrial_and_Scientific_5 POS 5.0 This is SO much better than vinyl tubing. No kinks or permanent dents in the hose and far more flexible. Love it! Worth the extra cost.
131 Industrial_and_Scientific_5 POS 5.0 What's not to love? It fits and I did not have to purchase a complete new garbage pail.
5306 Industrial_and_Scientific_5 POS 4.0 OK, so these are made of plastic and if you man-handle these things they will break easily. Also if you do not install or remove these the proper way they will easily snap and break. They exceeded my expectations and the price was amazing. I couldn't find these in my area and I have installed them on all the hooks that allow it on my peg board. It solved my problem of the hooks coming off every time you retrieve an item off the the peg board.
4662 Industrial_and_Scientific_5 POS 5.0 work good
One other thing to consider. I cut a piece of carpet pad (rubber or anything you have laying around would work) to place under the base to cut down on the noise and vibration. Again, may not be necessary but it sure makes for a nice setup.
1123 Industrial_and_Scientific_5 POS 5.0 I purchased these to cut up and use as a replacement refills for my Sofn Feet pedicure tool. The tool actually comes with MEDIUM GRIT which also works well. It was just cheaper to buy and cut these than buy the actual refills the company and vendors offer.
8471 Industrial_and_Scientific_5 POS 5.0 Goes on easy, looks great. Wear gloves and use disposable brushes. Seal can well with plastic or can will seal right and paint will harden.
9817 Industrial_and_Scientific_5 POS 5.0 This is the second petal foot switch I have purchased. This fisrt one worked perfectly so I found the need for a second one. I'm very pleased with this product.
4970 Industrial_and_Scientific_5 POS 5.0 I needed some nylon lock nuts. They often cost a lot for even a small quantity at my local hardware store, so I bought there. They are working fine. This size is for 6-32 machine screws.
3568 Industrial_and_Scientific_5 POS 5.0 I always keep a bar on this stuff on hand. Just this last week I patched a corrosion pinhole in the water line on my pool heat pump. It was a copper pipe, filled with chlorinated water at 20 psi, so it wasn't a simple problem to fix. And it was on the bottom of a pipe inside a heat pump with limited bottom clearance, so I did the job standing on my head. But if you rough up the surface and make it super clean (with acetone if possible) and wrap it all the way around, it will patch the hole. Cure overnight for full strength and now I don't have to pay $5000 for another heat pump. I had the same problem on the input line 2 years ago and the first EP-400 patch I put on that side back then is STILL leak free.
7208 Industrial_and_Scientific_5 POS 4.0 Good material. Flexible and remains that way for hot or cold fluids. Thanks.
9605 Industrial_and_Scientific_5 POS 5.0 I just used these for the first time last night with my Fluke 87V meter to test output from a small solar panel. They were just the right length to get into the female connection after unplugging the output lead from the panel. The leads that came with the meter are great, but they are too short for this type of usage. Worked very well. I would recommend these if you need to get into an area that is inset or has other protected items around it.
3333 Industrial_and_Scientific_5 POS 5.0 Does the Job!
6089 Industrial_and_Scientific_5 POS 4.0 it works thanks it is just what i was looking for and im glad that i got it thank you
8757 Industrial_and_Scientific_5 POS 5.0 Nice cutting mill for the price. Been using it on high grade steels without much issue.
80 Industrial_and_Scientific_5 POS 5.0 tried this out on a stone i needed to grind down for a perimeter wall i am building around my garden. worked great.
8048 Industrial_and_Scientific_5 POS 5.0 Just what I needed.
724 Industrial_and_Scientific_5 POS 5.0 Extremely impressed with how heavy duty this little switch feels. Using it for a very low voltage application, but it has a very strong latching mechanism and a very solid and satisfying click when toggled.
216 Industrial_and_Scientific_5 POS 5.0 The usual high quality from Shop-Vac.
8650 Industrial_and_Scientific_5 POS 4.0 Perfect replacement for my broken original doorwall latch. As others have mentioned, its operation is a bit stiff. Was hoping it would become easier with time but we've been using it now for months & it's still hard to operate -but it was a quick install & it does the job.
2091 Industrial_and_Scientific_5 POS 5.0 I like the product. Good value, and fast service.
7479 Industrial_and_Scientific_5 POS 4.0 it gets the job done what more can i say it work like it should just take you time with it no rush
I'm extremely satisfied with it!
9261 Industrial_and_Scientific_5 POS 5.0 good price
8780 Industrial_and_Scientific_5 POS 5.0 Purchased for our emergency first aid supplies. Hope never to have to use it - but you never know what disaster might put you in need of this little gadget.
9313 Industrial_and_Scientific_5 POS 5.0 Good selection of snap rings
2406 Industrial_and_Scientific_5 POS 5.0 Must have if you're moving anything heavy from refrigerators to boulders with 2 people. Incredibly easy to use and move stuff
9690 Industrial_and_Scientific_5 POS 4.0 K
4821 Industrial_and_Scientific_5 POS 5.0 I used these for my Ford Crown Victoria P71 doors - the part where the door lock knobs comes up through was missing. These fit perfectly. I would guess they would work for most other cars too.
3044 Industrial_and_Scientific_5 POS 5.0 Great they are KREG screws, what else can you say.
6788 Industrial_and_Scientific_5 POS 5.0 good for playing doctor
My intended use was to tape down some circuit boards having surface mounted LEDs. I need to see those LEDs. This tape is almost perfect except for all the strings. Oh well. It's not like I have no other use for duct tape.
2. A stainless steel cup (It did not drill through the bottom of the cup*):
7691 Industrial_and_Scientific_5 POS 4.0 This is a must have for re-screening jobs. You must be sure as to just what size you need since this type does come in two different sizes. It would be much nicer if they would put it on a roll rather than package it as they do. Once it gets tangled up it is a chore to untangle.
FOUND IT ==> Buy the Locitite "Tite Foam" product (also on Amazon) instead. SOOOO much better. Worked beautifully on the first try, nozzle straw is bigger and transparent so you can actually see where it is clogged. The Great Stuff can has a tiny diameter, completely opaque straw that is super difficult to clean out if you want to try to make a second run.
7013 Industrial_and_Scientific_5 POS 5.0 As it says.
9464 Industrial_and_Scientific_5 POS 5.0 i need more walls, thats how well these worked and if i had more walls i would buy momre
654 Industrial_and_Scientific_5 POS 5.0 Great stuff
4367 Industrial_and_Scientific_5 POS 5.0 This is the best mail order packing tape I have ever purchased.
3159 Industrial_and_Scientific_5 POS 5.0 A decent putty alternative and ideal for using in higher pressure situations
6285 Industrial_and_Scientific_5 POS 5.0 This thing is amazing. A must have for any 3D printer
5649 Industrial_and_Scientific_5 POS 5.0 works if you bust a hose
Incidentally, for those who care, you can do almost the same thing with other products like this. What damages left over paint the most is a partially filled can. To stop it, just replace the lid very tightly and then turn the can upside down. the paint will then stay at the top, and all of the skin and crap will be at the bottom of the can. Same with other wood finishes like polyurethane or varnish or ...??? Just fill the can with marbles (if its a small can..) or tightly close the container and store upside down. It won't keep forever, but it will allow you to store it for awhile ... maybe until your next use.!!!!
2814 Industrial_and_Scientific_5 POS 5.0 This is kind of the classic heat grease. I got it because it has a very strong history of good performance. It's quite a bit thicker than other greases that I have seen and used. I haven't had any problems with application or subsequent performance, but then I don't really overclock much, so I don't really put it through the difficult tests.
The Gorilla Tape fabric is thicker and stronger.
There really isn't anything serious to complain about, so consider the following list to be nit-picking
WHEN TO USE QUICK-EPOXIES
6242 Industrial_and_Scientific_5 NEG 1.0 Stopped working after using it four times in a two month period. Replaced with a GB tester that had really crappy reviews, and it has worked for over 12 months now. Looks like its a coin toss as to which one will last.
SHORTCOMINGS
3) The ear tips are really comfortable. I had a $20.00 Sprague Rappaport style that had binaurals and ear tips initially designed for use during the Spanish Inquisition! Ouch! All the Littmann models are great to wear.
8330 Industrial_and_Scientific_5 POS 5.0 I purchased this rod to use as a squib rod, primarily. For those unfamiliar with that term, a squib is bullet that gets stuck in the barrel of a gun due to insufficient propellant (powder). At 0.3125" diameter, this rod will work perfectly in any 9mm, .38 Special, .357 magnum. It will also work fine in larger calibers like 40 S&W and .45 ACP. The 12" length is perfect to ensure that even super long handgun barrels (like some long revolvers) can benefit from its use.
The price of this durm is great and for another use it might be OK. I will spend another $50 and buy the ONEIDA AIR SYSTEMS 17-gallon Steel Drum For Super Dust Deputy which is already drilled for the dust deputy. I guess it's best to stick with a product that's engineered for that use.
6018 Industrial_and_Scientific_5 POS 5.0 good
Aluminum is easy to drill, cut with a hacksaw, sand, mill, polish, or tap for machine screws. See Customer Images for a sample project.
3007 Industrial_and_Scientific_5 POS 4.0 good
-----------
6955 Industrial_and_Scientific_5 POS 5.0 I bought these for a board game that my husband makes. this is what is called the murder ball). Typically we have used a glass shooter marble for this however I was looking for something different.
5018 Industrial_and_Scientific_5 POS 5.0 Strong, well made, with precision threads. A good choice if you need a good brass fitting.
282 Industrial_and_Scientific_5 POS 5.0 Good
745 Industrial_and_Scientific_5 POS 5.0 A quality switch that is built with safety - unlike some cheap imports than can cause a shock hazard when they fail.
bottles contents..
4803 Industrial_and_Scientific_5 POS 4.0 Does the job
4187 Industrial_and_Scientific_5 POS 5.0 Well-made operating scissors. Quality shows in the sharpness and alignment of the blades -- this should last decades or more.
better off with something like 3M of some other generic at the
5614 Industrial_and_Scientific_5 POS 5.0 Universal Carter Electric in-line fuel pump for carbuerated applications. Carter has been a big name in fuel systems for many years and they know what they are doing when it comes to building a fuel pump. This pump comes pre-assembled with a filter on the suction side, a band for mounting it to a frame rail or body panel, 2 electrical connectors, and 2 hose clamps. In other words pretty much everything you need to install it in your vehicle to eliminate vapor lock issues like the ones I was having. I also ened up purchasing a few more hose clamps and 3 ft of 5/16 fuel hose so that I could install it in a little cleaner fashion than I could have without it. You will still need to get a relay to power it if your car did not have an electric pump before, but those are cheap and easy to find.
Note that this glue forms rigid bonds; it's great for glass, metal, and most hard plastics, but will not work for flexible joints. Loctite 4902 or 4903 is a good choice if you need some flex (but expect to pay handsomely).
1877 Industrial_and_Scientific_5 POS 5.0 This set of two lashing strips are much longer than I needed for my purpose - however the price point was much better than smaller lashing strips. I use this to anchor a Epson video projector to an old tv mount (designed for CRT TVs). This is an easy way to add extra stability to the projector.
Here are my observations:
8038 Industrial_and_Scientific_5 POS 5.0 Good quality and fast shipping
If you enjoy using top quality tools then this set is worthy of your consideration.
8205 Industrial_and_Scientific_5 POS 5.0 Arrived perfectly straight.
8785 Industrial_and_Scientific_5 POS 5.0 emergency medical response for first aid and to remove the steril staples that they would need to remove just in case.
323 Industrial_and_Scientific_5 POS 4.0 These are great for any demolition or cleanup work you need to do. Priced competetivley here on Amazon, they give you exactly what you ask of your tools. They go to work and don't let you down. Have used them for several projects and they hold up to a beating.
1241 Industrial_and_Scientific_5 POS 5.0 If you are working with treated lumber, these nails are the best. They worked flawlessly in my Porter Cable framing gun when we just replaced roofing trusses and cross bracing and are worth the extra dollars if the wood is exposed, or could be exposed to any elements. Will definitely buy more just to keep on hand.
Great heat withholding ability and is just so damn tough when set.
6521 Industrial_and_Scientific_5 POS 4.0 Very nice and at good price
I've seen complaints about the construction and it's true the soap and the recovery tanks are cheap thin plastic. The good news is they are also cheap replacement parts, so I suggest ordering an extra set if you're worried they'll not hold up. Most of the rest of the unit is pretty well made. I'm curious about the motor however, it seems powerful, but it says 12 Amps of power, then on the website the breakdown specs list a 7.96 Amp (8) motor, somebody made a mistake maybe. We might just be playing games again, motors have a surge rating and maybe that is 12 Amps, it's not unlike the promoters to embellish a little even if the explanation is lame. If they all do it, then it becomes folly not to list it that way. The unit glides well with the brushes running, I have no shag carpet so I can't speak to that, but the standard thick carpet and thin commercial types, and it works well on. The tank sizes allowed me to do a long hallway, the landing at the front door, and the upstairs laundry room and a bit more to empty the tanks. I have a mini Bissel, I used to use in the kitchen before I tiled it, and it took 3-4 fills just to do a 4 X 12 foot area. This is perfect for bedrooms and smaller living areas, but when I want the whole house, Ill still go to the RD.
CFH
How convenient to find these on Amazon.
9514 Industrial_and_Scientific_5 POS 4.0 Used this to move my pool table from one room to the other. Easily supported my 1100lb 9ft pool table.
1437 Industrial_and_Scientific_5 POS 5.0 When my wife and i moved from Florida to New York, we packed up all of our boxes using generic tape that we purchased at Staples. Although it was during the cool season in Florida, we discovered that every box we had packed, the tape was falling off. That's when I first started using Scotch Heavy Duty Shipping Packaging Tape. After reinforcing all of the cartons, we were delighted to see that the Scotch brand tape remained firmly on each box.
8004 Industrial_and_Scientific_5 POS 5.0 All is well, will do business again.
7777 Industrial_and_Scientific_5 POS 5.0 Just what I needed.
8157 Industrial_and_Scientific_5 POS 5.0 perfect for my application
4740 Industrial_and_Scientific_5 POS 5.0 .Works great
6009 Industrial_and_Scientific_5 POS 4.0 These could be more comfortable in my ears. Quite a bit of pressure and I would not want to wear it more than a minute or so. I have no idea if this is a professional quality device, but it works perfectly fine for taking blood pressure and that is all I will ever use it for. Good price.
3506 Industrial_and_Scientific_5 POS 5.0 I am a doctor who lives in Belarus. Bought this magazazine 8 varieties of surgical instruments, in an amount from 4 to 10. Total 49 pieces. I bought what was on sale and that weighed a little. Shipping cost is almost 3 times more expensive. To me this product came a month later, he was brought to me from the U.S.. I was pleased with it, good quality for this low price. Yes, I know better quality, but this quality is not two or three times more expensive, and at least ten times or more.
7893 Industrial_and_Scientific_5 POS 5.0 I needed a small 7/8" diameter 12" long piece. This was a great way for me to not have to purchase a full length piece locally that I would not of used most of. Fast shipping.
3296 Industrial_and_Scientific_5 POS 5.0 These things work well and don't fall apart or slip of the wires, like some super cheap products Ive seen.
3307 Industrial_and_Scientific_5 POS 5.0 A little nutty but a good balance of wiry and nutty overall.
6655 Industrial_and_Scientific_5 POS 5.0 I usually buy Littmann due to the quality and this particular one lives up to their name. Good sound quality, supple vinyl, head easy to use on adults and kids.
2062 Industrial_and_Scientific_5 POS 5.0 I have two sets of these. Simply put these are the best test leads on the market. First thing that you'll notice is right out of the box, remove the twist tie, and they fall free and straight! They have almost no memory what so ever! The high quality silicone rubber jacket is flexible even in cold temperatures. I've had mine in mid 30's temps. Never does it feel like it's stiffening! For me this is a huge plus as tangled leads, in cold temp leads to aggrivation. Add in the dangers of working on switch gear and you have a recipe for disater! Next thing you'll notice is the banana jacks. Full length shrouds and smooth but firm fit in any 4mm jack on any meter give you confidence. These aren't going anywhere. Next is the probes themselves. Long probes with a slight texture for extra grip. Healthy finger gaurds to keep your hand from sliding forward and contacting the tip. The tips themselves are the perfect length and SHARP! If you need sharp tips for electronics, take a good hard look at these. Finally the safety rating. They are 10A rated on current and 1000V CAT III / 600V CAT IV. Again, put simply, these are the best probes on the market for DMMs.
812 Industrial_and_Scientific_5 POS 4.0 Tool works like it's suppose to. Picture of wood block a bit misleading, it's very small and difficult to use as a result, so have something else to use for a hammering block.
891 Industrial_and_Scientific_5 NEG 2.0 The Wheels are too small to be useful on anything other than a perfectly flat surface. A crumb caused them to stop rolling.
5386 Industrial_and_Scientific_5 POS 5.0 Works well.
8946 Industrial_and_Scientific_5 POS 4.0 Nice HDPE, coulda been cut a little straighter though.
The two mate very well and there is no play after installing the alligator clips to the end of the threaded portions of these test leads. Very tight tolerances.
7811 Industrial_and_Scientific_5 POS 5.0 Excellent extrusion very high quality!
4733 Industrial_and_Scientific_5 POS 5.0 I am new into a nursing program and asked my professors and some other nurses what they would recommend. They suggested the classic Littmann as one of them has had their's for 6 years with no problems and another nurse has had her's for 17 years. I am very impressed. I hope to have years of use of this Stethoscope.
5269 Industrial_and_Scientific_5 POS 5.0 this stuff can pretty much fix any soft material, I have used it on dozens of shoes, RC lexan bodies, and a broken appliance cord strain relief sleeve. It has never failed me. AWESOME!
8503 Industrial_and_Scientific_5 POS 5.0 It was what I needed, and it was cheaper here than what I would have paid for it locally at Lowes.
9946 Industrial_and_Scientific_5 POS 4.0 Does what it's supposed to do.
9324 Industrial_and_Scientific_5 POS 5.0 Ok
7828 Industrial_and_Scientific_5 POS 5.0 great item at a great price
2572 Industrial_and_Scientific_5 POS 5.0 Place this on the back of your shoe for those blister inducing spots, works fantastically well!
5817 Industrial_and_Scientific_5 POS 5.0 WORTH THE PRICE- HOLDS TIGHT
The other option is to use a soft start made by Dometic. It's approximately $370.00 dollars but it will lower your inrush or starting current much lower than this capacitor will. A word of caution, don't try to run at 100% of capacity of your generator. From my research, its mixed results for the 2000 watt generator crowd.
The build quality is excellent.
6375 Industrial_and_Scientific_5 POS 4.0 works great
If you need to enlarge an existing hole, and want it well centered on the original hole. This can work nicely even in wood, when drilling with Forstner (flat bottomed) bits - the Unibit can cut a 1/8 starter hole which is just enough to keep the Forstner bit centered.
6322 Industrial_and_Scientific_5 POS 5.0 Great for hobbyist. Sometimes when going to closed after a measurement it is not at zero. Off by .001. Some people act like this is the end of the world, its not. Love the fact it does both standard and metric. The fractions are kinda weird but whatever
One thing that could be improved - a longer handle to jack up the car - the current handle is very short and Torin could provide an extra length or two so you don't have to reach under the car to jack it up.
It fixed a tear in camp chair, and a broken ice chest lid.
A single step drill bit might save one the hassle of carrying a set of standard drill bits, but of course only when all the material you are drilling is thin enough.
4249 Industrial_and_Scientific_5 POS 5.0 needed for around ranch for minor vet surgery
406 Industrial_and_Scientific_5 POS 5.0 Super sharp points and easy adjustment. Only purchased this divider to work with nautical maps for fishing, I can't complain about it!
8723 Industrial_and_Scientific_5 POS 4.0 I've used tachometers over my adult life for a variety of tasks, both contact and non-contact. This one was purchased for measuring the RPM of some machine tools including a drill press.
4156 Industrial_and_Scientific_5 POS 5.0 I love this tool. I'm no youngster and I frequently work alone doing cabinetry and home remodeling. The handle is well-padded and very comfortable. The Gorilla Gripper allows one person to move 4' x 8' panels of plywood and drywall around the shop or work site without bending awkwardly. This, in my opinion, significantly reduces the probability of a lower back strain and eases the load on arms and shoulders as well. While the sheet goods don't get any lighter, the unique grip action and lifting angle of this tool makes it possible to get a firm, properly balanced grip on full-sized sheet goods. By grasping the panel at the center of the long edge, you can easily carry a full size sheet by yourself. Moving the gripper a few inches to either side of center causes the panel to hang from the gripper at an angle suitable for going up or down stairs. The rubber padding and nice wide grip distributes the gripping pressure allowing you to carry 4' x 8' drywall panels without damaging or marking the panel. This is a well-made tool suitable for around the house/shop as well as commercial applications. This is worth the price and has already gotten rave reviews from my arms, shoulders and back. Recommended without reservation.
3981 Industrial_and_Scientific_5 POS 5.0 My first time using a product like this on metal jewelry and accessories that I make, and it has worked very well the several times I've needed to use it.
5886 Industrial_and_Scientific_5 POS 5.0 I was using Ducktape duck tape which stinks. This stuff however sticks and lasts. I used on a dust collection system and no leaks. Even used this as a joint coupler of two four inch pipes. Holding strong after about six months as of 2 March. Highly recommend.
The big surprise was how good this caliper ended up being - it is a very good buy. For those woodworkers on a budget, this may be all you need. It is well built, sturdy, accurate, and comes with a nice storage case that works well. It has all the locking mechanisms to hold a measurement, and the hold well. Basically, it has all the features of the 100$ Starrett caliper I own, but for $70 cheaper. I would like to say that the Starrett is more accurate and durable to justify why it costs so much more, but I am not 100% certain of that. This caliper is well made, and I don't see it breaking any time soon.
This unit is excellent for the price. Seems at least as accurate as my micrometers. Checked it on some standards, and it was repeatedly right on.
2352 Industrial_and_Scientific_5 POS 5.0 This stuff works Great! much better and more convenient than the other stuff out there.
-More flexible than super glue
3343 Industrial_and_Scientific_5 POS 5.0 Had a 5 gallon metal can but no funnel. Bought this and it fit perfect.
5751 Industrial_and_Scientific_5 POS 5.0 My door opener was growling and shuddering pretty often so I checked the carriage and it was seriously worn. This is an older door opener (ISD990) and uses magnetic switches. My other door opener, also a Genie (H4000A), is newer and uses the lever type switch, it has no magnet. Other than that they are interchangeable. So I took the H4000A carriage (without a magnet) and glued a small magnet to it. It worked perfectly on my ISD990 door opener with the magnetic switches. Since they are so inexpensive I bought 2 of these replacement carriages, #36179R, and put one on each of my doors. In a nutshell, this new carriage will work on both the magnetic switch openers or the lever switch openers. You may have to readjust the location of the switches but that's a snap. I could not determine any difference in the 36179R and the 36179R.S other than the '.S' is apparently a replacement for newer magnetic switch units, but, do your research first.
3137 Industrial_and_Scientific_5 POS 5.0 Awesome!
5236 Industrial_and_Scientific_5 POS 5.0 All good
1. Oily coating.
925 Industrial_and_Scientific_5 POS 5.0 Had small vapor barrier job. This size worked out fine.
483 Industrial_and_Scientific_5 POS 4.0 I bought these for my home garage and they seem to work just fine. They do tend to break down and leave a little bit of dust from the paper fibers after a bit of use, but they're still good enough for glass and Windex.
3050 Industrial_and_Scientific_5 POS 5.0 They are legit Kreg screws and Kreg screws are awesome. Amazon is tough to beat on price for these bad boys.
-When a battery retaining clip on my netbook computer snapped (trust me: *no* replacements for this are available), it was Gorilla Tape to the rescue to hold in the aftermarket 9-cell battery that probably overstressed the retainer in the first place. Gorilla Tape now overlaps the battery-netbook seam...and it's not going anyplace.
The Gorilla Glue Company makes many different glues, in different colors and container sizes. The one I am reviewing is the 2 oz. size of the original brown colored Gorilla Glue. This glue will dry out in the bottle, so I do not recommend buying larger bottle sizes, unless the glue will be used in the near future. For most of us, we use a little glue, and put the bottle away until needed the next time. This glue is interesting, in that you wet the surfaces, add a thin layer of glue, and clamp the surfaces together for 1-2 hours. In the meantime, the glue will expand and turn into a hard foam. After application, any exposed expanded glue may be peeled away or squashed back down a bit while it is drying, so that the repair is not so noticeable. This stuff will eventually dry as hard as a rock. Overall, I would give this glue an Amazon rating of four and a half stars, rounded off to five stars, as Amazon requires ratings to be in whole numbers.
2944 Industrial_and_Scientific_5 POS 4.0 Nice assortment of test leads long enough to accommodate much bench testing and under hood work; wish that some of the assortment was made of heavier guage wire and bigger grippers.
CQ200A-1004 / 35" / Nut or Clip & Spade Terminal / Push-In Clip, PG9 adaptor, 7/16" Attaching Nut
4407 Industrial_and_Scientific_5 POS 5.0 good condition, good price, and worked fine.
I used the sewn-on variety in Nam back in the sixties.
Other:
2176 Industrial_and_Scientific_5 POS 5.0 Very inexpensive and they have a good grip. I don't think I'll be able to use them for my intended purpose (putting rubber bands in my dog's hair) but that it a flaw in my thinking, not the product. I'm sure I'll find another use for them.
Smooth cutting step drills - like these Irwin bits - cut plastic sheet much better than regular bits, especially as hole sizes increase. I found it easy to produce clean edged, accurate holes with the Irwin step bits in my handheld drill. Trying to use standard bits often made a mess of things, unless the holes where small (say less than 1/4 diameter).
7928 Industrial_and_Scientific_5 POS 5.0 I used this as a seat post for an old Schwinn bicycle. It works very well! Quick delivery.
8796 Industrial_and_Scientific_5 POS 5.0 LOVED THIS WIRE, I USED IT ALL UP, THANKS!!
The Neiko draws only about 9 microamps. Left in, a cheap LR-44 might last 15 months, and an SR-44 might last 26 months.
1038 Industrial_and_Scientific_5 POS 5.0 Good quality nails. It's nice if you need a variety.
1624 Industrial_and_Scientific_5 POS 5.0 Greatly simplifies tool alignment, especially table and chop saws.
1223 Industrial_and_Scientific_5 POS 5.0 this is the greatest product ever. its a little expensive compared to other similar products but the results are amazing. I have ordered it twice now, will continue to use because this really does whiten teeth.
9999 Industrial_and_Scientific_5 POS 5.0 good product
5301 Industrial_and_Scientific_5 POS 5.0 simple peg board accesory don't know why I see so many shops where people don't use these.
5086 Industrial_and_Scientific_5 POS 5.0 Great product, great price.
5999 Industrial_and_Scientific_5 NEG 1.0 I order this black stethoscope but got a blue non related one instead I have uploaded pictures because words cant describe what I got...Not even the same manufacturer it looks like a toy...I am just like...wow
The Aluminum rods were perfect for our project.
1481 Industrial_and_Scientific_5 NEG 2.0 poor quality and they drip. I purchased three of these and they all leak. Spray pattern is okay.
9677 Industrial_and_Scientific_5 POS 5.0 Product arrived on time. Product is as advertised. Good stuff.
169 Industrial_and_Scientific_5 POS 5.0 good
1693 Industrial_and_Scientific_5 POS 4.0 The locking mechanism is kinda hit and miss if you don't hit it just right. Other than that, they are awesome.
6770 Industrial_and_Scientific_5 POS 4.0 Toddlers love it! I ordered one dark blue and black but I got both black though...
3486 Industrial_and_Scientific_5 POS 5.0 I just wanted a simple fine point gripping tool for placing electronic components - and that's what I got. 5.5 inches long with a curved tip point about 1.5 inches from the hinge. They could probably be ground to a sharper point if needed - but they are fine as is for my needs. the surface is polished to a high gloss, and they are rather crudely stamped "SS Pakistan 7M". minor surface irregularities make them look like they were hand finished. for the price they are a great value.
The embedded mesh lets you do face work even with withe 1/8" blade, so it's sort of a do-all, but for work where I want to bear down on it I bought the 1/4"
5653 Industrial_and_Scientific_5 POS 4.0 I'm not recommending this over a fetoscope for hearing fetal heart but it is good for the adult patient and excellent for a "to-go" bag for physical exam.
5774 Industrial_and_Scientific_5 POS 4.0 Seems to be plenty strong, but smells like rubber tires?
3391 Industrial_and_Scientific_5 POS 5.0 Worked as described,good price and fast service.
3441 Industrial_and_Scientific_5 POS 5.0 Good size. Easily visible from driver position. Oil filled glass attenuates some of the bouncing for a good average measurement. Tape seems to be aggressive and hold well.
1702 Industrial_and_Scientific_5 POS 5.0 Excellent quality but slow delivery. I assume they are not produced until the manufacture has the order in his hand. In any case I will order from this
The fluke was so bad even when it worked that you never knew if power was on or off. Must have just been a bad one. Others having good luck so give it a shot.
6357 Industrial_and_Scientific_5 POS 5.0 Excellent set of digital calipers. Everything you could want all in one set.
3960 Industrial_and_Scientific_5 POS 4.0 This is my favorite cyanoacrylate gap filling glue. The only problem is the tip gets clogged between each use and you run the risk of tearing the tip off when the black cap gets very stuck. This seems to be a common shortcoming of most cyanoacrylate glues. They stick so well there is no way to protect the opening.
know-nothings that heard a name so they get this. You are far
193 Industrial_and_Scientific_5 POS 5.0 good
1191 Industrial_and_Scientific_5 POS 4.0 Good to prevent some chilly air coming in.
228 Industrial_and_Scientific_5 POS 5.0 Great fit and they work very well.
WHEN IT ARRIVED IT WAS TINY. THERE WAS HARDLY ENOUGH GOO FOR ONE CPU.
5167 Industrial_and_Scientific_5 POS 4.0 These are nice nails and work well in a variety of nail guns. The downside is that they come packaged in a very flimsy box. The nails have some weight to them so it seems like invariably, the box ends up rupturing during shipping, so you end up with the nails scatted in the shipping box.
Smooth, sharp cutting edges allows one to produce clean accurate holes with ease in thin metal, plastic and wood.
3649 Industrial_and_Scientific_5 POS 5.0 Looking for an extension hose and this one satisfy my need.
4536 Industrial_and_Scientific_5 POS 4.0 Basically there are only 2 types of motorized toothbrushes that you should look at and they are the Sonicare and the Oral-B. I used the Sonicare for about 1.5 years and thought it was working well until my dentist told me that I was starting to have receding gums. While I cannot blame the Sonicare, in my opinion I think the Oral B is gentler on your gums. There is also a "mild" setting which is easier on your gums which is not an option on the Sonicare.
9740 Industrial_and_Scientific_5 POS 5.0 This was a very inexpensive way to buy Super Glue. At times I use quite a bit in my hobby shop, doing wood work tying flies and other such projects. The reclosable package has 12 regular size (2 gram) tubes of the original super glue (not gel),
8155 Industrial_and_Scientific_5 POS 5.0 This was a shot in the dark purchase. I was looking for a lightweight rod, and this is a little heavier than I expected, being aluminum. It weighs about 5 pounds, I was expecting around two or three pounds.
2805 Industrial_and_Scientific_5 POS 4.0 Probably good for most people for my needs it's only okay. Easy to apply but 200hrs to burn in supposedly, not sure about that. I only brought it for temporary uses. Good price/performance.
The set also includes plastic "anchors" for single support hook. The "anchors" are used to strap single support hooks to the board so they stay on the pegboard securely.
4022 Industrial_and_Scientific_5 POS 5.0 Good quality great price
7861 Industrial_and_Scientific_5 POS 5.0 Aluminum - just like you would expect. It's silvery colored and machines pretty well. Alloy 6061 is harder than pure aluminum but still machines fairly well. The surface is smooth but not polished. It can take a good finish.
2660 Industrial_and_Scientific_5 POS 5.0 I've used Arctic Silver for many years building computers and have never had a problem with these tubes. I love that they have it in a syringe style to make applying it to a CPU a breeze. Because a small dab with work, there is plenty left over for other applications and other computers that may need it.
2345 Industrial_and_Scientific_5 POS 5.0 great stuff. Put the brass into a plastic baggy, spray a little, seal the bag and tumble! All the cases get lubed and there is no mess. I've that procedure for at least 1500 brass cases and they flowed through the de-capping die with ease. I've re-ordered another can. Still using the same can after 1500 cases.
1351 Industrial_and_Scientific_5 POS 5.0 This belt is excellent. It's REALLY quiet! I'm going to order a couple of more as backups.
1765 Industrial_and_Scientific_5 NEG 1.0 Waste of money will never order any more plastic fittings, going to stick to metal ductwork and ground everything good.
6065 Industrial_and_Scientific_5 NEG 2.0 It is very tricky to perform the test. i could never find out how it really works. They need to find out a simpler method /equipment for this kind of test.
The new spray is great! when is fold down it work like a normal sprayer when you pull it up it work with the stick
3008 Industrial_and_Scientific_5 POS 5.0 bargin
1661 Industrial_and_Scientific_5 POS 4.0 My only complaint is that the adjustment requires a lot of effort. Once you figure it out though, you will find that you have a really good instrument. The magnetic base is especially useful.
7981 Industrial_and_Scientific_5 POS 5.0 This is exactly what I needed and the item was shipped quickly and packed very well. I would definitely recommend it.
3395 Industrial_and_Scientific_5 POS 5.0 Good Deal.
8422 Industrial_and_Scientific_5 POS 4.0 not as thick as I had hoped
3973 Industrial_and_Scientific_5 POS 5.0 Have only used it once so far, but it sure created a strong joint steel to plastic. Good high temperature performance as well. Coats a surface with its low surface tension.
6635 Industrial_and_Scientific_5 POS 5.0 I have been using Aerokroil for more years than I care to think about. The bottom line is, this stuff really works. There are a lot of penetrating oils out there that do "work", but if you want the best of the bunch, this is it.
5188 Industrial_and_Scientific_5 POS 5.0 I bought this along with the 1 gallon Eagle UI-10-S Red Galvanized Steel Type I Gas Safety Can. I filled them both with gasoline and placed them in my Florida Room (Den) for several days before storing them properly. The whole time I never detected even a hint of gasoline odor. I bought them when my lawnmower conked out on me and had to be serviced. With gasoline now containing varying amounts of ethanol, a form of alcohol that above levels of 10 % can cause major damage to engines because it attracts moisture (water), this purchase was an obvious choice. In some cases this new fuel type can even invalidate warranties for system repairs. I threw out my old plastic, vented gas containers for this reason. These galvanized steel containers have a perfect seal that drastically reduces exposure to moisture, meaning I don't have to make constant trips to the gas station to keep it fresh and I avoid engine repairs. I bought this one with the spout, but not on the 1 gallon. I suppose it's never too late to buy a spout for it. Anyway, great product!
3485 Industrial_and_Scientific_5 POS 5.0 Bought this for my granddaughter, who wants to be a vet.. I also got her other medical type things in "pink"... These appear to be the real thing, at a really great price! She'll have fun listening to her pets heart and "practicing" for her future career...
893 Industrial_and_Scientific_5 NEG 2.0 The picture is misleading. It shows a wheel that was machined. The actual wheel is made of sintered iron (looks like cast iron but it is easier to manufacture) and painted grey. It comes with all the pitfalls of chap casting, the major one being dimensional variability. There are more holes and smaller. The axle is bolt and nut - a plus because you can take it apart and add 10mm flat washers to stop the wheel moving from side to side. The bad part is that the wheel hole for the axle is not centered in the middle of the wheel and that the wheel hub side faces are not parallel to the wheel or to each other. So if you shim it with washers you will also have to clean the hub faces. Also the wheel hole for the axle is larger than the axle and even after shimming you will still get some side play. On the plus side is that the load is higher than the similar sized plastic wheels - the reason I bought them. You can also use more of them and mount them in a row to increase total load capacity while still maintaining maneuverability.
9744 Industrial_and_Scientific_5 POS 4.0 Product does what it was intended for and good quality.
2068 Industrial_and_Scientific_5 POS 5.0 After trying several pastes for mostly receding gum issues, this by far has been the best all around mouth care. The pastes were great, but even with one of them, my toothbrush was gummed (no pun intended) up, took forever to clean it and really did not target the gums specifically. Reading about aloe and other properties, I found this and this one has become my favorite paste. The gel is not loose, tastes a nice mint and leaves an extremely clean feel to my teeth and gums. I will continue to purchase this one and have passed on my used tubes to a friend a work who has other issues.
526 Industrial_and_Scientific_5 POS 5.0 These are great drill bits.
9915 Industrial_and_Scientific_5 POS 5.0 Very happy with the power supply. Two 0-30V outputs up to 5A each and one fixed 5V output. Very handy for working and testing micro controller based projects as you have 5V output dedicated to just uC only and two rails for, lets say, testing N-Channel mosfets in high switch modes/applications, which require, lets say 12V and, lets say, 10V above the rail to turn the mosfet on. Displays current as well. I have another single channel power supply of different brand, but I call it noise generator as it has huge amount of noise and ripple, when I attached it to my oscilloscope, but Dr. Meter is very smooth, which is a huge plus. I find this power supply very handy and would recommend to any electronics enthusiast or even professionals on budget.
2228 Industrial_and_Scientific_5 POS 5.0 Have glued many objects with this product. Very satisified.
4517 Industrial_and_Scientific_5 POS 5.0 good, high quality vice. I mount this on my bench press drill to hold things in place. WOrks wonderful.
Ships from and sold by Didi VIP Outlet.
6625 Industrial_and_Scientific_5 POS 5.0 I use this stuff primarily for rust removal and it works GREAT! It leave the metal's color and finish in tact, but after 5 minutes of sitting, I can just wipe the rust away. I've also used it to break a nut loose once. It wasn't heavily rusted, just stuck (maybe a bent thread). After 5 min, it worked, when other penetrating oil's wouldn't.
2257 Industrial_and_Scientific_5 POS 5.0 excellent product
3016 Industrial_and_Scientific_5 POS 5.0 Work great with the straight nail finisher.
4702 Industrial_and_Scientific_5 POS 5.0 I had a hard time finding this in stores and didn't have time to run to a craft store that I figured would have it, so I bought it as an add-on item on Amazon. I can't even remember what my original intent was in buying it, but I've found it quite handy for various small tasks around the house since I had some left over (e.g., gluing magnet bars to the bottom of my new shower curtain to weigh it down and help it snap/stick to the "lip" on the bottom of the shower floor, which just happens to be the right kind of metallic). The only downside I've found is that after repeated use, the tip of the bottle can get clogged with glue, but I've found that inserting a toothpick (or similar small disposable object) will work to clear it and make the bottle usable again.
1878 Industrial_and_Scientific_5 POS 5.0 They have turned out to be very useful.
If you have a need similar to what I described above, get this stuff -- you will not regret it. Highly recommended.
9721 Industrial_and_Scientific_5 POS 5.0 I'm stuck, don't know what to say. Product works good.
2907 Industrial_and_Scientific_5 NEG 1.0 To small!!
6616 Industrial_and_Scientific_5 POS 5.0 Kroil is the absolute best penetrating oil on the market.
8295 Industrial_and_Scientific_5 POS 5.0 Good product.
6259 Industrial_and_Scientific_5 POS 4.0 This tester works but is not 100% accurate. Any circuit being checked needs to be double (and triple) checked to be certain as to whether or not it is live. I would not recommend this to an inexperienced person.
If you live in earthquake country NOW you can put things where you want then and they will stay. Without realize it I had everything to the back of the shelf giving it rattle room and I still had things fall and break.
2772 Industrial_and_Scientific_5 POS 4.0 I used this to re-seat my i7 and it works exactly as advertised. I would recommend this to anyone who needed something like it. Only time will tell how well it holds up.
5585 Industrial_and_Scientific_5 POS 5.0 Great Product at a great price. Will purchase again when these start to run out.
2397 Industrial_and_Scientific_5 POS 5.0 they worked great for my last move
1310 Industrial_and_Scientific_5 POS 5.0 Love it and it work very well, I would recommend to anyone!
3107 Industrial_and_Scientific_5 POS 5.0 excellent
3464 Industrial_and_Scientific_5 POS 5.0 I live in the desert so this farm jack base is a life saver as most often the jack is used in sand. This base is much larger than expected which is good for better weight distribution.
(1) most of my hose connections have locking levers that latch into grooves on the attachment pieces to prevent them from pulling out. This coupling doesn't have any such grooves, so it's friction fit only, unless I want to come up with something quick and dirty to latch one hose end to the other (such as a wire loop).
Revision -- this stuff really IS great, but there are a couple of things I should have noted:
5487 Industrial_and_Scientific_5 POS 5.0 Love this tumbler. Using it in the lab for small scale milling. Gets the job done and has milled many lbs of medium so far without problems.
115 Industrial_and_Scientific_5 POS 5.0 Worked as expected
I go through 5-6 tubes a year.
8963 Industrial_and_Scientific_5 POS 5.0 If you do a lot of soldering, this item is a much needed item to keep the solder tip clean and to ensure a good solder job every time.
4286 Industrial_and_Scientific_5 POS 5.0 great it did the job
The Neiko 01407A comes in a handy hard plastic case to keep the caliper safe. The caliper itself is pre-installed with a battery, and comes with an extra battery, that is a great bonus in a time when so many items come batteries not included.
243 Industrial_and_Scientific_5 POS 5.0 Work great
Install was pretty simple too once you manage to get the AC unit open. Wire was easy and just need to find a place to hang it inside the unit.
neighboring components.
675 Industrial_and_Scientific_5 POS 5.0 The 3M Super 33+ electrical tape is the best vinyl tape in the market. I've tried others (even 3M's cheaper line) and most have the problem of the adhesive becoming gummy and oozy after it gets old. Not so with the Super 33+; it's the only electrical tape I'll buy.
7824 Industrial_and_Scientific_5 POS 5.0 Perfect fast.
6588 Industrial_and_Scientific_5 POS 4.0 Works well . I connect it between my receiver (IRC) and the coax tomming from the LNB.I would rather blow this surge protector than my receiver.
8597 Industrial_and_Scientific_5 POS 5.0 Excellent.
2301 Industrial_and_Scientific_5 POS 5.0 Sturdy enough for our need, and seems to be of good quality.
1940 Industrial_and_Scientific_5 POS 5.0 It works great and bought ti co compare to other brands.
This should be available in the local home supply store but it's not and I am increasingly relying on Amazon and the reviews to make these purchases. Thank-you Amazon.
I was pleased at how easy these tests were to run and feel confident (based on other tests) that the results are accurate.
3435 Industrial_and_Scientific_5 POS 5.0 I bought this Brute so that I would have an extra garbage can when my original one filled up, and it works great for that, but I also realized that it's quite useful for holding 33-gallon (or bigger if you don't care about the bag being a bit oversized) bags of yard debris and other bulky waste.
5721 Industrial_and_Scientific_5 NEG 2.0 I don't know if I received an older roll or what, but it did not stick well. I applied pressure to it and within hours, it fell down. I am not impressed and would not buy again.
4677 Industrial_and_Scientific_5 POS 5.0 exactly as pictured and described. great price better than in stores. overall a good win
Clipping is noticeable at about 3 Vpkpk when using a 9 V battery. Using a 12 Vdc supply fixed that right up.
-----------
The Good:
3303 Industrial_and_Scientific_5 POS 5.0 very good product
2936 Industrial_and_Scientific_5 POS 5.0 Exactly what I expected.
3872 Industrial_and_Scientific_5 POS 5.0 I have trusted and used this for years when I need a solid connection. It is rock solid in the applications I used it on. Just be sure you want the connection to be permanent as it does not come off easily and you will likely damage whatever you are working on before it let's go.
5520 Industrial_and_Scientific_5 POS 4.0 Decent quality, works as it should.
Gigahertz Solution's competitor to the Enertech Emdex II
5704 Industrial_and_Scientific_5 NEG 2.0 The idea is great, and it works great for installing new shocks but forget about it for removing old rusted shocks. You'll just strip and ruin the insert that sits on the flat of the shock. The metal just isn't hard enough..
4643 Industrial_and_Scientific_5 POS 4.0 Great bottles but people should get up into the future. These have rubber bulbs and essential oils melt them like they are some sort of drink mix in warm water after awhile. It should be acknowledged that for water based liquids or thick oils, these may be ok, but you are going to have to get monprene or some other polymer if you want something to withstand the dissolving power of some essential oils after time. Noting liek essential oils contaminated with bits of degenerating rubber and the scent of rubber dissolved in it.
8328 Industrial_and_Scientific_5 POS 5.0 I didn't need a lot, so this was perfect. And, it was a great price. I use it for instructional purposes, so the "unevenness" is great for learning.
Tip: To get a clean line, mask off an edge with tape, then peel away after applying.
It's made out of glass, and is filled with gas.
3399 Industrial_and_Scientific_5 POS 5.0 Quality screws work great!
9344 Industrial_and_Scientific_5 POS 4.0 The assortment of generous numbers of wingnuts is exactly what I needed and the range of sizes provided was appropriate.
Kirk Rogers Furniture Company
3163 Industrial_and_Scientific_5 POS 4.0 Stinks to the high heavens and is very gooey even when set. Way to pliable for my application.
precise job.
2745 Industrial_and_Scientific_5 POS 5.0 great
3924 Industrial_and_Scientific_5 POS 4.0 Product description is good, arrived on time. satisfied with product.
2047 Industrial_and_Scientific_5 POS 4.0 Just like everything else, it's a fluke, so little pricey for most things, but no worries. You get what you expect.
5755 Industrial_and_Scientific_5 POS 5.0 As the advertisements suggest, this tape will stick to brick and virtually any other surface. Be careful though, because it might just strip the paint upon removal. This was the painful lesson I learned when trying to temporarily hold some video cables to my wall and ceiling. Even when using a hair dryer to soften the adhesive, I was not able to prevent the paint from getting ripped off, no mater how gentle I was.
4867 Industrial_and_Scientific_5 POS 5.0 Works
201 Industrial_and_Scientific_5 POS 5.0 I dug 3k sqft of baseboard out from between a textured wall and travertine tile. this stuff enabled me to fill the crevace left behind and then seal the gaps when the baseboards were replaced. I love this stuff.
3Hz-30Hz ULF
Before you apply the compound clean all the surfaces and make sure they have no oil, finger prints, or dust on them. Make sure you have removed the old thermal compound from the surfaces. Some old compounds get rock hard and can be difficult to clean. I have used Goo Gone and it is by far the best cleaning solution I have ever used. Don't use too much and clean only the CPU and heat sink. Then wipe all surfaces dry and wipe again with an alcohol swab and a Q tip if necessary to clean up the old compound. Then give it a final wipe with of a coffee filter as they are fiber free paper and you should have a clean surface. These surfaces must be absolutely clean and even the oil from a fingerprint that you can't see can cause a problem.
5432 Industrial_and_Scientific_5 POS 4.0 It's okay. I had to hammer on it to get it to release the spent part of the rivet for every rivet it put in, which was a pain but it did do the job. I suspect it either needs an adjustment or else lubrication in the jaws that grip the rivet. I don't foresee it as a tool I'll use a lot, so since it did the job I bought it for, it's not too bad.
Not much mG at all
rated 4 stars due to the magnet being kinda shtty but you know 30$ for a dial indicator is better than paying 100$ for a snap on one
5256 Industrial_and_Scientific_5 POS 5.0 Worked great!
7356 Industrial_and_Scientific_5 POS 5.0 This is a must have for tight situations.
7007 Industrial_and_Scientific_5 POS 5.0 This tubing is great for our steam juicer, as it resists heat much better than any other product, especially better than tygon plastic tubing.
5855 Industrial_and_Scientific_5 POS 5.0 Greatest packaging tape for the price. Super strong, super adhesive, yet easy to peel and tear or cut to any length. Also, it's LONG. Don't know if I'll be able to use all of it before I'm gone. Buy it, you'll like it!
8139 Industrial_and_Scientific_5 POS 5.0 Product as advertised, shipped quickly, very happy!
5197 Industrial_and_Scientific_5 POS 5.0 bought two plastic 5 gal cans manufactured in china by two different manufactures, both were defective and had to be returned.
2283 Industrial_and_Scientific_5 POS 4.0 This glue has its place. I've used it for strong glue bonds of joints using two types of wood, and also for repairing broken book bindings. 5 star - very strong, 4 star - expands and requires some removal of excess before it hardens, and 3 star - what's left in the bottle won't last long.
7578 Industrial_and_Scientific_5 POS 5.0 Perfect, stable easy to set up, plenty of attachment points for bags
7244 Industrial_and_Scientific_5 POS 4.0 Good little hammer to check reflexes in a first aid kit. I got one to round out our home first aid kit - I suppose that as a former paramedic, I got a little carried away. This would be perfect for a child or medical student. It's a nice quality, low cost way to check reflexes. I don't anticipate having to check reflexes on a regular basis...but if I ever do need to do it, I'll have the percussion hammer. I guess I'd rather have it and never need it, than not have it and need it just once.
7114 Industrial_and_Scientific_5 POS 5.0 there ok
6799 Industrial_and_Scientific_5 POS 5.0 Great Stethoscope. She uses several of these at the place where she works so now she has her own to work with. It's perfect for her.
2875 Industrial_and_Scientific_5 POS 4.0 these have come in very handy. use them everyday. the one annoying thing is the very slippery plastic or rubber clip covers.. when you squeeze to open the clips, they either tend to rotate sideways from your fingers, or the clips themselves want to slip out of the covers , and they are a pain to put back.
1140 Industrial_and_Scientific_5 POS 5.0 Using this product to seal up connection joints on my furnace flue exhaust pipe. So far, no leaks and no escaping exhaust gases. I have used similar products in the past but this is more heavy duty and stronger. Wish they had a 25 or 50 roll available. Great product.
1428 Industrial_and_Scientific_5 POS 5.0 What a difference having thicker shipping tape makes. I recently had to ship something very heavy and was able to use this tape to ensure the box was well sealed. I've used the Scotch tape of less thickness and was frustrated how much additional tape I would need. This thicker tape really makes a distinct difference. It makes life better.
5836 Industrial_and_Scientific_5 POS 5.0 Great for patching tents, HUGE roll, bigger than I thought I was going to get. But I'm glad I got it. Can't never not have not enough gorrigla tojpsd gkjldfagjkdfaoidfoiherw dafhj jdf kjadfjk. 10/10 would buy it again.
7807 Industrial_and_Scientific_5 POS 5.0 Nice material, arrived as described and packaged in a sturdy cardboard tube, protected from the elements and accidental damage.
I will note that, after I ordered this, I saw an equivalent FML27 bulb at a local "big box" home improvement store.
8380 Industrial_and_Scientific_5 POS 4.0 Its a solid brass rod. Straight and sound. Rough where it was cut. You can sand it down with a sharpening stone and it will make a good squib rod..
The embedded mesh lets you do face work even with withe 1/8" blade, so it's sort of a do-all, but for work where I want to bear down on it I bought the 1/4"
8848 Industrial_and_Scientific_5 POS 5.0 There isn't a lot that can go wrong with PVC sheet so the one criteria I use to rate quality is the whiteness and the consistency of the color. After purchasing this same product many times, I have found that the white is consistently bright white. (not slightly yellowed like some other sources I've used)
Then she had the nerve to tell me that the error code displayed on My broken microwave is interpreted as an " electrical current issue on my end". And , that she Recommends that I Pay to have an electrician come to my home and instal a designated circut for just this microwave alone. Excuse me??? I explained again, that this was not my FIRST Microwave, and that I have NEVER heard of a "Non Specialty" microwave needing to have its own circut breaker and that My home was built less than 5 years ago, and that it was Ludicris to insinuate the failure was on my end!!
9144 Industrial_and_Scientific_5 POS 5.0 Works well.
7030 Industrial_and_Scientific_5 POS 5.0 Excellent
2328 Industrial_and_Scientific_5 POS 5.0 This stuff works great! Just follow the directions.
2503 Industrial_and_Scientific_5 POS 5.0 Bought this initially to lift my 4-wheeler when doing work or maintenance. Works real good so-far. I just tried it right out of the box to see how it performed. Worked as well as expected. Will probably use for vehicle work also since the rating is 12ton. Compact design so it will be easy to put in tighter areas and not have anything in the way. Time will tell more, but I like what it does so-far.
2420 Industrial_and_Scientific_5 POS 5.0 Works WAY harder than the claim-great product, but buy it elsewhere---
6666 Industrial_and_Scientific_5 POS 5.0 A very well made product. Exactly as described.
1531 Industrial_and_Scientific_5 POS 5.0 Nice high quality foam with good adhesive. Would buy again.
8832 Industrial_and_Scientific_5 POS 5.0 Great stuff. Perfectly clear, easy to work with a scroll saw.
2655 Industrial_and_Scientific_5 POS 5.0 Good product! Read a lot about thermal paste and this seemed to be what everyone recommended. I used this in my new build so I don't have a good A/B comparison with the paste that came on the cooler.
2141 Industrial_and_Scientific_5 POS 5.0 Thanks
ME3851A/ME3951 models have data outputs
9379 Industrial_and_Scientific_5 POS 5.0 working good .Thanks
6483 Industrial_and_Scientific_5 POS 5.0 The larger size is handy
4261 Industrial_and_Scientific_5 POS 4.0 good price and does what it is suppose to do.
4363 Industrial_and_Scientific_5 NEG 1.0 This is good tape, but the 1 star is because it is way overpriced at 8.88. As i recall it was only about 2.00 when i bought it here, and it is not much better than the 55yd wide tape i just bought for $1.00 at the local discount store (thank God for them), or the tartan tape at Ebay for $2.75 w. S+H. Just wanted to let others know.
Yes Houston we have a problem. The tiolet flange that holds it in place was rotten from some sneaky water leak somewhere not visible. This insidious leak had taken its toll and caused great damage under the bathroom tile.
7520 Industrial_and_Scientific_5 NEG 1.0 Lasted a whole hole. Get it, yeah, lame all around the board. Butter knife likely better.
5101 Industrial_and_Scientific_5 POS 4.0 Brass fitting, it is the size ordered.
2. It's small, light, and fits into our cramped closet with ease.
Thanks so much
3964 Industrial_and_Scientific_5 POS 5.0 I use this for just about everything but a broken heart
3208 Industrial_and_Scientific_5 POS 4.0 Haven't tried it yet. But my son, an expert metal fabricator, told me " the best Marine glue is by 3M" Don't remember which #!!
6870 Industrial_and_Scientific_5 POS 5.0 Loved them but few black colors.
5974 Industrial_and_Scientific_5 POS 5.0 works like it should
[...]
For everything other than stairs the Gorilla Gripper has been very satisfactory to use. It's still a lot of work moving 3/4" sheets around all by my lonesome, but at least it's now practical to do so without having to bring in help. No problem recommending this product.
573 Industrial_and_Scientific_5 POS 5.0 This is amazing electrical tape. Once you apply it is not going anywhere.
1022 Industrial_and_Scientific_5 POS 5.0 Work fine in my Senco brad nailer.
955 Industrial_and_Scientific_5 POS 5.0 FLAWLESS ITEM AND DELIVERY
* Enable/Disable Power (per channel or globally) would be really useful.
4528 Industrial_and_Scientific_5 POS 5.0 Great product prompt delivery
4379 Industrial_and_Scientific_5 POS 5.0 Great stuff. I used it to seal joint seams on my patio/deck rain roofing system. Also, used it around a concrete patio adjacent to the concrete wall foundation. The sealant goes on clear and dries sort of fast. I would suggest just laying a four foot bead down if you are planning to smooth it down like with your finger because it gets tacky soon. A little goes a long way.
6336 Industrial_and_Scientific_5 POS 5.0 So far so good. This reads well, slides easy. The buttons are easy to use. Make sure to zero our the reading before using every time. Nice case, and comes with a spare battery!
Markings are highly visible and easy to read.
2173 Industrial_and_Scientific_5 POS 4.0 good quality forceps. strong clips.
8549 Industrial_and_Scientific_5 POS 5.0 It's exactly as advertised. A replacement for the drain plug on your Rubbermaid stock tank. Fit perfect and easy to install.
In two hours, the JB Weld still on the paper had hardened enough that it wasn't sticky and didn't deform under my finger. With a jewelers screwdriver 1mm wide, I was able to remove the JB Weld from the well around the button as easily as modeling clay. I doubt that would have worked with another adhesive. The button still works flawlessly.
You can get 2 standard lengths of tubing out of 10ft of this.
552 Industrial_and_Scientific_5 POS 5.0 Excellent value, high efficiency cutter. Removes material very fast. I was looking for a cutter that would work on styrene models, and this was recommended, and it works very well. I bought a variety of this type of cutter, and so far they have all exceeded my expectations.
1920 Industrial_and_Scientific_5 POS 5.0 Amazing, buying another roll.
6404 Industrial_and_Scientific_5 POS 5.0 Great tool, nice not to have to measure something 10 times, kinda one of those set it and forget it moments!
9103 Industrial_and_Scientific_5 POS 5.0 got just what i wanted for a good price
5418 Industrial_and_Scientific_5 POS 4.0 Much better than the older model. Seem to work well having only used it a handful of times so far. Time wil tell, but you really can't go wrong with Stanley.
3301 Industrial_and_Scientific_5 POS 4.0 Works great well worth the money
4486 Industrial_and_Scientific_5 POS 4.0 the overal quality was nice and thick but it did not seem to sit right on the peg board system. I ended up taking it down and using another tray system.
3868 Industrial_and_Scientific_5 POS 5.0 Good product and good service.
9323 Industrial_and_Scientific_5 POS 5.0 Excellent product.
8424 Industrial_and_Scientific_5 POS 5.0 Really nice foil tape that can be used for many things but usually for metal things. It is very sticky and really holds. There is a trick to separate the backing from the tape. You have to gently rub the end edge till they separate. So try rubbing the end edge till you get the hang of it. Too bad they don't give instructions on how to separate it. It is easy if you know how.
6051 Industrial_and_Scientific_5 POS 5.0 Working vinyl tube. Easy to clean and seems to be holding up to lots of use.
2369 Industrial_and_Scientific_5 POS 4.0 Works fine. Got what I ordered. Could have been cheaper and stronger for the price.
9588 Industrial_and_Scientific_5 POS 5.0 Very good probes that I like to use on AC outlets.
1787 Industrial_and_Scientific_5 POS 5.0 This is one of the best cyanoacrylate-based glues I have ever used. Just like some other reviewers noted, if you need immediate bond, use a small amount. If you need to fill gaps, use more. In any case, this glue gets the job done.
8918 Industrial_and_Scientific_5 POS 5.0 Just as described. Thickness is dead on at .50". milled or produced perfectly smooth on both faces.
8964 Industrial_and_Scientific_5 POS 5.0 Works well as an all around Flux for soldering
4537 Industrial_and_Scientific_5 POS 5.0 Worked just fine no leaks, happy that I bought them.
We use them for our side by side rear curtain to keep the rain and snow off of us. These have help up just fine in rain & snow for over 2 years
8432 Industrial_and_Scientific_5 POS 5.0 great quality for a small job, worth the extra couple bucks to get 3m.
Creaky hinges, carts and other stuff aren't as creaky and cranky as I am.
They quickly became my main benchtop probes. I love them. And I love the precision they offer.
2739 Industrial_and_Scientific_5 POS 5.0 Does the job
9469 Industrial_and_Scientific_5 POS 5.0 Good quality for the price
3432 Industrial_and_Scientific_5 POS 4.0 Would work great with my yardwork outside, or in the garage/ small shop area, but we use it to hold the dog food for our four dogs and it serves that purpose really well !!
5866 Industrial_and_Scientific_5 POS 5.0 Gorilla tape is a household staple. Never fails.
one of the tricks to keeping the tape from melting and getting sticky, keep the plastic container. Now that I am retired I don't use as much and the plastic cover seems to help.
1008 Industrial_and_Scientific_5 POS 4.0 These Finish Nails worked fine in my Senco SNF1 gun. I've purchased other brands that stick in the loading track, shoot two nails at a time and twist when shot due to improper head size and inconsistent point angles. And the price was competitive with local suppliers. Delivered in a timely manner.
2029 Industrial_and_Scientific_5 POS 5.0 they love it
7652 Industrial_and_Scientific_5 POS 5.0 Living in Southern Oregon this summer has been rough, with multiple wildfires filling the valley I live in with hazardous levels of smoke. The 'N95' mask was the suggested one for those of us who have to go outside in these conditions, and while it doesn't filter out the scent of smoke, inhaled particulate levels are significantly reduced.
5316 Industrial_and_Scientific_5 POS 4.0 works as advertised.
First off, the instructions are not detailed enough. It seems like it should be simple, but they don't give any guidance on the recommended offset from the door to make the best seal. On the first attempt at lining it up and putting in the first nail, it seemed too tight so I pulled the nail and backed it off a little. That seemed better at first, but after a few nails, I had gaps in some areas, either at the garage door side or the trim side.
One review claimed that these bits cut in two directions. To test this I tried making holes in hardwood by running my drill in reverse. It worked poorly, cutting action much slower and the quality of the hole was not as good as running the bit in a normal (clockwise) direction.
Loctite Blue is the perfect product to make sure that there is a no slip connection between bolts and their receivers, and it is outstanding for use with firearms as the stuff withstands the beating and vibration without a second thought. A little goes a long way, so use sparingly.
1780 Industrial_and_Scientific_5 POS 5.0 For me this is the best way to buy this type of glue. Better than the small tubes due to it being a bit thicker making it fill gaps and much easier to apply without making a mess or sticking your fingers together.
Gorilla glue was particularly effective on repairing my Ikea chest of drawers that had multiple broken joints. Where these joints had failed around the metal fasteners, chips of particle board broke free. Most were too small to recover and reattach. The expansion of polyurethane filled the voids. In fact, I which I used Gorilla glue when I first assembled it as the breaks probably would have never occurred in the first place.
I HAVE USED IT FOR SO MANY PROJECTS
3106 Industrial_and_Scientific_5 POS 5.0 No problems
8454 Industrial_and_Scientific_5 POS 5.0 Good tape. Can't say much more than that. It's metallic, sticks well and is easy to use. Care must be taken with any self-adhesive material.
Unless you are an Orangutan your arms are not long enough to carry 4x8 sheets of material, do yourself a favor and get one, or two. I just ordered a second one to use when two people are lugging some heavy sheets it will be real easy with the added horsepower of a helper as we have to lug up steps and a steep slope. One can do it by himself with the Carry Handle but with a helper and a second handle it will be a walk in the park.
1098 Industrial_and_Scientific_5 POS 5.0 good value
944 Industrial_and_Scientific_5 POS 5.0 perfect size screws works great for dry wall and building some shelf's.
2222 Industrial_and_Scientific_5 POS 4.0 Works okay so far, but one must add water to the surface to bond to. I find that a bit odd or inconvenient. If I need adhesion that strong I'd just use JB Weld.
-Optional stationary leveling feet were included
802 Industrial_and_Scientific_5 POS 5.0 I finally got to use this, and it works like a charm.
You have got to be kidding me? Are you serious? What is this hardware we speak of? A 24 karat gold nugget? Made out of diamonds perhaps? Maybe platinum? No no no, it's a simple $1 BOLT AND WING NUT. That's right ladies and gentlemen, they were too cheap to supply a stupid little small bolt and wing nut to attach it to the stand!!!
9306 Industrial_and_Scientific_5 POS 5.0 works ok
255 Industrial_and_Scientific_5 POS 5.0 great item but the gun was a POS had to returned the nails
3125 Industrial_and_Scientific_5 POS 5.0 I live in Arizona, where the water is very hard and very nasty. When I moved into my new house, the first changes I made were to fix the water softener, and to install a Reverse Osmosis filter system for a tap at the kitchen sink and the refrigerator. I bought this meter to see how well the filtration was working. The tapwater is about 600ppm, and the water coming out of the RO unit is about 40ppm. Having the meter allows me to check periodically for any deterioration of the RO unit.
Single rolls and short rolls (2104 in 3M part language) are also possibilities depending on the size of the project.
6342 Industrial_and_Scientific_5 POS 5.0 Excellent
7726 Industrial_and_Scientific_5 POS 5.0 Proudly made in the U.S, and aside from that, the best quality duct tape Ive ever had. 1.89 by 180ft. 13mil thickness.
*edit* Aug 2016
5975 Industrial_and_Scientific_5 POS 4.0 Helped fill the gap for our adhesive and save some money on the high quality adhesive that you bought
8126 Industrial_and_Scientific_5 POS 5.0 Excellent extrusion very high quality!
7837 Industrial_and_Scientific_5 POS 5.0 great rod for making brackets and easy to thread and bend and non magnetic for mounting a compass to on a phantom drone.
222 Industrial_and_Scientific_5 POS 5.0 Works great at a good price
176 Industrial_and_Scientific_5 POS 5.0 It was a little frustrating to have to buy the lid to the trash can separately. It was quite pricey too. Really curious why they are not sold together.
My entertainment cabinet, wiring closet and guitar pedal board look so fantastic and clean!
1224 Industrial_and_Scientific_5 POS 5.0 I've tried a few whitening mouthwashes, all of them alcohol-free, and this Rembrandt is my favorite. I've been using it for a month, twice a day, and it makes my teeth glow (added bonus is the fluoride! so don't eat or drink for 30 minutes after using this). I drink 4 cups of tea a day but I have orthodontic braces and therefore can't use whitening strips, so the whitening mouthwash is the way to go for me. I don't think this stuff burns - only if I've recently burned my tongue on hot food, *then* this mouthwash kinda irritates the burned tongue. And it's the most pleasant tasting whitening mouthwash I've used (Optic White was the worst!). It foams up a LOT but that's the nature of the whitening mouthwash, they all do that.
2487 Industrial_and_Scientific_5 NEG 1.0 Not very good quality. Doesn't always work as well as it should.
6607 Industrial_and_Scientific_5 POS 5.0 The best penetrating oil available on this earth.if the nut or bolt is really really jammed or tight then Spray it one night before and give it a time to penetrate and spray once more before you start your project the next day.
It arrives almost completely assembled. All you have to do is attach the handle using a Philips head screwdriver.
6373 Industrial_and_Scientific_5 POS 5.0 I didn't think this would be very accurate or would have problems being as cheap as it is, but have had no problems and is accurate for what I needed.
4912 Industrial_and_Scientific_5 POS 5.0 Love this for outdoor use. Extinguishes & collects butts without muss & fuss. Efficent & looks good; like a Pawn piece from a Chess set. Only improvement I recommend would be to add weight inside base (rocks placed in base, but outside bucket works so far for me) to resist tipover in moderate to high winds. Sand would be far too messy & attracts ants, etc. in my experience. Love it!
5888 Industrial_and_Scientific_5 POS 5.0 The weather forecast here in the Atlanta area was for a single digit cold freeze. When I saw the forecast I headed to Lowe's to get some outside faucet covers. Too late. They were sold out as was every one else including Ace Hardware. One of the employees at Ace Hardware told me what he did to protect his outdoor faucets. He wrapped then in a towel, covered the towel with a plastic bag and taped it down securely. I planned to follow his suggestion but had run out of duct tape and had only some thin tape to use, which I did. I wanted to get replacement tape and decided to try this Gorilla tape. When it arrived I was doubly pleased to see that it was weather resistant. I replaced the tape on my three outdoor faucets with the Gorilla tape and now have a firm and secure installation.
For those who don't know, you should never use a vacuum bag with your Shop-Vac if you intend to suck up liquids. Moisture will turn any vacuum bag to pulp. Refer to the manual for instructions on how to configure your Shop-Vac for wet cleanups.
3406 Industrial_and_Scientific_5 NEG 1.0 hard to press and wear out easily.
5923 Industrial_and_Scientific_5 POS 5.0 They don't split like cedar does, strong, uniform cuts. Good value for the money when you're hanging a lot of doors or setting cabinets.
2277 Industrial_and_Scientific_5 NEG 2.0 I am a pretty experienced hobby woodworker. I personally don't care for this glue. It's messy, it foams up, isn't as strong as other PVA glues like Titebond in tests. Overall, if I want a waterproof glue I'll use Titebond 3.
Eagles Nest Outfitters Atlas Polyester Hammock Hanging Straps (FFP)
5916 Industrial_and_Scientific_5 POS 5.0 worked as advertised
3703 Industrial_and_Scientific_5 POS 4.0 It's a water hose, what else can you say
The yellow plastic funnel is very useful though if it were made of a material that was a little more movable it would be easier to fill equipment when the can was near empty.
5354 Industrial_and_Scientific_5 POS 5.0 Easy to use and reuse
7812 Industrial_and_Scientific_5 POS 5.0 Used as a led light poll on my can am commander.
2468 Industrial_and_Scientific_5 POS 5.0 Works great.
347-987-3872
6238 Industrial_and_Scientific_5 POS 5.0 Good item, good delivery
With J-B Weld, Liquid Nails, Acetone and fiberglass cloth, there are not too many things that can't be repaired.
5995 Industrial_and_Scientific_5 POS 5.0 While low cost, this power supply was a good choice for powering 0-30V LED arrays of different configuations and assessing power draw, especially for higher voltage arrays such as 24 and 28V. Current and voltmeters agreed within 5% or so of the readouts on this unit and I observed less than 2-3% ripple on my oscilloscope. This appears to be a good choice for a basic power supply.
8049 Industrial_and_Scientific_5 POS 5.0 Just what I needed.
Cons:
2758 Industrial_and_Scientific_5 POS 5.0 It is the best thermal compound on the market.
3410 Industrial_and_Scientific_5 POS 5.0 Great and large
2488 Industrial_and_Scientific_5 POS 4.0 GOOD tool!! remember: turn off power to the line you're testiong: extraneous noise can confuse your interpretation..
8086 Industrial_and_Scientific_5 POS 5.0 Very good product .. i like it .
9697 Industrial_and_Scientific_5 POS 5.0 glus fine
I like working with brass because it machines beautifully and when polished gives your work a real stand-out look. It's stronger than aluminum (for a given size) but you can still cut it with non-ferrous metal cutting blades in a bandsaw or a miter saw.
5090 Industrial_and_Scientific_5 POS 4.0 This is a very well-made part, nice finish and heavy duty. i used this to modify the grease trap on my Blackstone griddle.
8741 Industrial_and_Scientific_5 POS 5.0 Very good deal and met my needs!!
-------------------------
3904 Industrial_and_Scientific_5 POS 5.0 IT LEAKED IN MY TOOL CHEST. DANK
9410 Industrial_and_Scientific_5 POS 5.0 Fast shipping, works great, Thanks
The duct tape part, well, it claims to last 6x as long as traditional duct tape (the package says "based on accelerated aging tests"). I don't verify the factor of six, but the tape does seem to hold up pretty well.
-Quick, responsive customer service from Seville (Amazon Warehouse Deals shipped it with a broken track for the middle basket)
BUT THE BAD: The first set of leads I ordered came with a perfect red lead, but the black lead was warped, slightly banana shaped. What the heck? These are supposed to be top quality. So I arranged to exchange them with Amazon, and Amazon had a new set here the very next morning. Kudos to Amazon! But when I opened them up, this time BOTH leads were warped. In opposite directions, so it's clearly not an intentional thing. And besides, I got ONE lead that was perfectly straight. See photo. Also, on one of the gray probes, the "grip ring" towards the front of the probe was sort of distorted/melted somewhat (not seen in photo.)
3858 Industrial_and_Scientific_5 POS 5.0 This stuff means business. I used to to join metal to metal after tearing apart a monitor for a raspberry pi magic mirror project. Follow the simple instructions and you will be good to go. I suggest not wearing clothing you don't want to damage if you tend to be sloppy. Once you mix the 1:1 solution, there is no going back. I used a popsicle stick to mix the two, then carefully used the popsicle stick to apply the mixed epoxy. Very happy with this product.
7759 Industrial_and_Scientific_5 POS 5.0 Let's face it, this is no master cardiology III or other high dollar scope. It does however do the job. This was puchased years ago and still serves as a back up for both myself and the wife. The tubing has lasted and hasn't hardened over the years. The ear pieces did have to be replaced. The bell housing is solid. Other consumables are still holding strong. Not bad for the price so we're happy w/ our backup.
588 Industrial_and_Scientific_5 POS 5.0 Great stuff.
9316 Industrial_and_Scientific_5 POS 4.0 I purchased a few of the different sets available from Neiko and am pleased. They are great for around the house or shop and much cheaper than buying parts individually. The organizer is just okay, don't expect much it had a small latch and so so fit but for the price that is fine.
6388 Industrial_and_Scientific_5 POS 5.0 Works well, nice to have additional 2 inches of measuring capability.
---
141 Industrial_and_Scientific_5 POS 4.0 the lid is much flatter than I expected! I would prefer a bit of a dome as shown!
9780 Industrial_and_Scientific_5 POS 5.0 Amazon Verified Purchase
6062 Industrial_and_Scientific_5 POS 4.0 This is the basic model hydrometer that comes with almost every homebrew starter kit. It is cheap and it works very well. The only major drawback is that it is incredibly fragile. One must be very careful when washing and sanitizing this because one slip or tap against the sink and this will crack or outright break into little pieces! That being said, it is plenty accurate enough for any skill level of homebrewing and cheap enough that replacing a broken one doesn't hurt too badly.
7717 Industrial_and_Scientific_5 POS 5.0 I mounted these wheels on my newly constructed welding table.
6969 Industrial_and_Scientific_5 POS 5.0 I used this tubing to protect the filament on my 3D printer. It is the perfect size for use with 1.75mm diameter filament and is way cheaper than the PTFE that most people use. The only difference between this and the PTFE is that this is less rigid which ultimately means it is more flexible and better for ninjaflex. However, most filaments (I primarily use PLA) are quite rigid and will hold up this tubing and prevent it from contorting.
Streamlight Polytac secured in offset mount by Loctite Blue - check!
2388 Industrial_and_Scientific_5 POS 5.0 Excellent tool
1964 Industrial_and_Scientific_5 POS 5.0 First the transparent part, it blends pretty well on most items I've used it on. So this is especially good for repairing stuff around the house. It's much more expensive than the regular duct tape, so I'd save it for cosmetic fixes. It's quite useful for small plastic trim pieces in older cars. Blends in pretty well and holds well.
I put it under my table decor on our windy deck to keep everything from blowing away. It held all summer without so much as a budge. When winter came, I simply lifted my decor and stored, saving the gel (again) to use later.
1767 Industrial_and_Scientific_5 POS 4.0 Woodstock dust control connectors, in all their various shapes and sizes, are good products in completing your dust control system for your woodshop. When I started, I didn't realize just how important dust control was. Now, after numerous allergic reactions to the dust, I am a believer.
I recently purchased more of these cans to bring my storage capacity to 25 gallons. These cans continue to deliver excellent service. I had an amusing incident at a gas station when pulling the can out. Here in NJ we are not allowed to pump our own gas (stupid I know). When the attendant saw the can he said FINALLY somebody is doing it right and has a real gas can. After filling the can he told me to not bother with the change for my gas.
42 Industrial_and_Scientific_5 POS 4.0 it's gorilla glue. read the directions, try not to make a mess, make things stick together incredibly effectively, like maybe epoxy level of effectiveness. note that the tip needs to be cut off, there's no weird trick to it, it just needs to be snipped off and then you can put the cap over it when you're done. additionally, when the directions say THIN LAYER, it's a thin layer, this stuff expands and you'll see some "great stuf" around the edges of your seal if you use too much.
5079 Industrial_and_Scientific_5 POS 5.0 If this is actually what you need, it's perfect. I like it much better than the rope style spline that I was replacing. If you don't know what size spline you need, then you probably don't need this. Check your size before ordering, people!
8448 Industrial_and_Scientific_5 POS 5.0 This is a good product that stands up to the elements as long as you don't expect it to stand up to mechanical type abuse.
for twenty years. After much use the insulation began to stiffen.
Regardless, arrived quick and worked great for the project I needed. Fairly easy to grind, drill and tap.
1987 Industrial_and_Scientific_5 POS 5.0 At a discount, this device is worth $10-12 delivered. All it does is split the hot and neutral line paths so you can clip a clamp meter into one of the legs and measure current draw. There is also a probe hole to check Vac with your DMM. The device is made of durable ABS plastic and feels tough, and should serve to make quick measurements of current draw from plug in appliances.
4938 Industrial_and_Scientific_5 POS 5.0 as described very satisfied
Also didn't dry in the 4 hours I had the door clamped closed gasket came right off when the door opened.
Incidentally... don't accidentally screw your garage door to the frame while installing weather proofing. This is why the teeth were stripped on the original part, not a fault of the door opener. Ha, ha.
2063 Industrial_and_Scientific_5 POS 5.0 I love Fluke products, just the cost of some of their items are too much! I previously had a set of Mueller test leads. One of the test leads failed and forced me to purchase a replacement.
2124 Industrial_and_Scientific_5 POS 4.0 Fit my small Shop-Vac perfectly.
6783 Industrial_and_Scientific_5 POS 5.0 Cheap stethescope, but works like a pro. It cane with multiple ear peices so that it would fit in your ears well. I was very happy with this purchase.
(7) High-End Modern Very Large Copy Machine
I have one in my kitchen and have two in my office that I use for a stand-up desk.
- Our floor is slightly slick when wet, this could have been prevented if we had kept mixing the final clear coat thus keeping the non-skid suspended in the epoxy. Much of it settled out.
5214 Industrial_and_Scientific_5 POS 4.0 Decent light weight rivets, adding some backing washers to the kit would be a nice touch.
3396 Industrial_and_Scientific_5 POS 5.0 I got these Deep Thread Pan Head Screws to add to my assorted screw divided container. I really like the quality. They don't cam out & start easily.
9154 Industrial_and_Scientific_5 POS 4.0 WORKS WELL
682 Industrial_and_Scientific_5 POS 5.0 Best electrical tape I have found
2443 Industrial_and_Scientific_5 POS 5.0 DON'T HAVE ANYTHING THAT WEIGHS 4 TON BUT I'M SURE IT WOULD WORK FINE.
7039 Industrial_and_Scientific_5 POS 5.0 Used in an under counter hot water dispensing application that does not place line pressure on the tubing... This product holds up to the near boiling temperature that caused polyethylene tubing to crack and leak after a few months.
Excellent drill bit for this price.
1721 Industrial_and_Scientific_5 POS 5.0 I usually end up gluing my fingers together and I still love this stuff. It takes a few moments to set, but is very strong. Mainly use it to glue 3D-printed (PLA) parts together, or to glue small neodymium magnets to things. Also works great with the accelerator spray of the same brand, but the accelerator certainly isn't required for a great glue-up experience.
* You must read the directions!
7856 Industrial_and_Scientific_5 POS 4.0 Quality product from this seller. Precision cut exactly to measurements. Fast shipping and come safely packaged in a sturdy thick walled tube with sealed plastic caps. Highly recommend this seller.
5973 Industrial_and_Scientific_5 POS 5.0 This is exactly what it says it is and takes up space like a champ. Easily cut with knife, or breaks cleanly if you pull it apart. I cut some lengthwise and used an extra half strip for an extra wide part of the gap, and it worked just fine.
975 Industrial_and_Scientific_5 NEG 1.0 Bad purchase!! Don't buy any nails not clearly marked with the angle on the box! SENCO does not mark them.
6321 Industrial_and_Scientific_5 POS 5.0 4 months later and they still zero out correctly and has been a great aid in making 3D models on my printer.
This is a good power supply for your test bench and it is easy to use and set up. I told the supplier that I no longer had my oscilloscope and I asked what test specs they used to test meters with. He sent me a 40 page document of the lab results for benchmarking the unit's design and it was a set of impressive tests and results. They went through all types of voltage and current fluctuation tests and well as hypot and static shock tests and surge and dip voltage tests and others.
1975 Industrial_and_Scientific_5 POS 5.0 Holds all of my spare test leads in one location.
4244 Industrial_and_Scientific_5 POS 5.0 one of the strongest little magnets i've ever seen, really handy for alot of things
4620 Industrial_and_Scientific_5 POS 5.0 Update: owned 2 of these going on 6 years and they are super bright and fit both 6 cell maglites perfect. Battery life has been greatly extended too. No more yellowish incandescent light. These produce bright White light.
1237 Industrial_and_Scientific_5 POS 5.0 I sided my front porch with these and found that worked as well as the guns brand.
4959 Industrial_and_Scientific_5 POS 5.0 Nothing better than 100% Silicone Sealer Don't bother with cheaper caulking compounds that have only a small amount of silicone. .Read the labels carefully
3460 Industrial_and_Scientific_5 POS 5.0 Great
7823 Industrial_and_Scientific_5 POS 5.0 Good product.
7235 Industrial_and_Scientific_5 POS 5.0 Perfect.
7988 Industrial_and_Scientific_5 POS 4.0 Using this as a door protector at a barn. The dogs clawed through the old door. They can't claw through this stuff.
9844 Industrial_and_Scientific_5 POS 4.0 These are well made with no burs on them from the tooling process. Fit snuggly. Would recommend these to anyone needing a hose fitting. I used for a repair to a propane line on a BBQ.
971 Industrial_and_Scientific_5 NEG 1.0 These nails are not NOT for DeWalt 51276! They are not the 34 degree angle that this finish nailer requires. Bought some and am sending 4 boxes back the angle is not marked on the Senco packaging at all. A302000 and A302509 WONT WORK WELL IN THIS NAILER. I noticed the angle was slightly off but the first 4 nails came out just fine and BAM #5&6 came out at the same time and bent over and left 1/2" folded over on the surface. This is UNACCEPTABLE IN FINISH WORK!!! Buy something else that is clearly marked 34 Degrees. SENCO does not mark theirs, don't buy them.
These were purchased in order to clean up the wiring in my 2 gang box in the bedroom. I had to tighten some connections and make it more stable and these fit and these did just what I wanted and needed.
8237 Industrial_and_Scientific_5 POS 5.0 I didn't need a lot, so this was perfect. And, it was a great price. I use it for instructional purposes, so the "unevenness" is great for learning.
159 Industrial_and_Scientific_5 POS 5.0 It works fine.
7121 Industrial_and_Scientific_5 POS 5.0 As in all items I've ordered from Small Parts, this was no different. As advertised. Just what I needed (great selection). And very quick service. The only place to get short run, smaller amounts of metal and other materials. Smithy.
4167 Industrial_and_Scientific_5 POS 5.0 OEM Box and contents. I go through a bag about every 3 months. Item was as described and shipment arrived quickly. You might find the equivalent for a bit less $ under the WINDSOR brand, which is the commercial equivalent of the SEBO brand. Many hotels use WINDSOR vacuums, but they are really SEBOs underneath. I love my X4 and these bags are perfect.
6308 Industrial_and_Scientific_5 POS 5.0 Be sure its off before putting it back in case, or the battery will run down......
3869 Industrial_and_Scientific_5 POS 4.0 Strongest epoxy there is, 5 stars on that, 3 stars because it dries dark gray ( black would have been 5 stars), 1 star because banner ad says 2 pack, it's only 1 pack; of course 2 tubes.
9209 Industrial_and_Scientific_5 POS 5.0 These are well made of solid brass. No burrs, no scratches, nor any other deformities. Just exactly what was ordered.
1723 Industrial_and_Scientific_5 POS 4.0 Takes a while to cure compared to the thinner stuff that sticks within a few seconds. Slowness can be a good thing for when you don't want it to accidentally stick in the wrong spot.
1493 Industrial_and_Scientific_5 NEG 1.0 The water that sprays through this smells like mold spores! Can't get rid of the smell. Had to throw them away.
8008 Industrial_and_Scientific_5 POS 5.0 It is a beautiful copper rod! Will braze it to stainless or similar for art.
701 Industrial_and_Scientific_5 POS 4.0 Great Quality Tape for electrical purpose.
5591 Industrial_and_Scientific_5 POS 5.0 It is easier to order these online than to travel to an Oreck store which is about 17 miles from us. The bags are exactly the right size.
1852 Industrial_and_Scientific_5 POS 5.0 Highly recommend, I am using these all the time, it is a common length and I have went through about 100 of these it a week. Went to big box store and got more to replenish my supply. I use the kreg pocket hole system a lot more than I thought I would.
------
5074 Industrial_and_Scientific_5 POS 5.0 Needed a thicker gauge than any of my local big box stores sold. Amazon came through with the perfect size at a good price and helped me fix my screens!
7521 Industrial_and_Scientific_5 NEG 2.0 it takes to much torque to cut ok for the first 3 sizes then it just stops and i have 1 hp drill press
9680 Industrial_and_Scientific_5 POS 5.0 super glue works very good.
Overall it is worth what I paid but not what I had hoped. I don't recommend the product I think there must be better lights without the issues I described maybe for a little more.
7589 Industrial_and_Scientific_5 NEG 1.0 The tap went in 5 turns into a brass fitting and it snapped. I was simply trying to clean threads and using much pressure at all. The only garbage in the threads was old pipe dope.
6937 Industrial_and_Scientific_5 POS 5.0 Lowes and Home Depot were both out of the propane rated Teflon tape so I ordered it from the old reliable Amazon Prime. Now I have two rolls on hand.
7305 Industrial_and_Scientific_5 POS 5.0 It works really well on flexible items like cords - doesn't really go on smoothly, but it solves the problem and I'm happy with that
8905 Industrial_and_Scientific_5 POS 5.0 It is what it is and performs as expected.
- It's impossible to keep it aligned perfectly straight while nailing, which then causes wrinkles/gaps
3226 Industrial_and_Scientific_5 NEG 1.0 My capacitor only lasted 1&1/2 nights. It was attached to Analog dial Frigidaire FFRA05L1R1 5000btu AC. It cooled a tear droptrailer no problem,but cycled often so maybe that was the issue. It probably cycled every 1/2 hour. I was using a 2200 Yamaha generator and it wouldn't work with the AC on high until I added this so it did work. I'm thinking I need a bigger capacitor or use the low setting after it cools down so it doesn't cycle as much. Any ideas?
4409 Industrial_and_Scientific_5 POS 5.0 Good price ... quickly delivered. You'll mostly use the Brown Tripoli and the Red Rouge. Good quality compound and the amount in each stick is good too.
8551 Industrial_and_Scientific_5 POS 5.0 Great little baggies. Just what I needed. Easy open and close. Perfect for earring backs,beads etc. Good price.
3. Buttons sometimes get a little "crunchy".
409 Industrial_and_Scientific_5 POS 5.0 The points are not exactly the same length but they are perfect for what I use them for and are very well built. I'm sure they will last me a long time.
3032 Industrial_and_Scientific_5 POS 5.0 Excellent belt. Very thick leather, and should hold up for a very long time. Much thicker than the one it is replacing, and the roller buckle makes it so much easier to put on. Probably my best purchase of the month.
When is a step drill better than a standard metal drill bit?
6646 Industrial_and_Scientific_5 POS 5.0 A very nice tool. Carotid sounds etc are clear. Should last for years.
4204 Industrial_and_Scientific_5 POS 5.0 I Bought these cups for mixing powder colorant in soap making. They are perfect! Less mess equals less stress on me and then I toss out in the garbage to be recycled.
The case exists, that's about all. It's a really basic blow-molded case. You'll have to take the base off to store it in the case, and everything rattles around because the molding is just a cavity, and not formed to fit.
It went nuts the day I got it. After a few minutes, it worked flawlessly. Apparently I'd gotten moisture and a bit of debris on the scale, affecting the capacitive coupling. It would probably drive any digital caliper nuts.
7785 Industrial_and_Scientific_5 POS 5.0 Aluminum rod. What is there to say.
Manual stethoscopes work off physical properties, so materials and workmanship are key. Unless equivalent parts can be tested to work as well and at lower cost, beware of copies or worse, counterfeit Littman parts or stethoscopes.
I'm using this to adapt a Festool sander to a Kobalt brand
8133 Industrial_and_Scientific_5 POS 5.0 Perfect fast.
The quality of the hose is just OK. Although it's fiber-reinforced (protecting against bursting), it is relatively thin and the ends are stamped steel, not solid brass. You can easily deform the ends, causing leaks. I found the hose lasts for about a year when left on a parked RV, then has to be replaced.
3490 Industrial_and_Scientific_5 POS 4.0 It is a great buy for the cost. Students love these for the color and it is perfect for practice in the classroom setting.
3641 Industrial_and_Scientific_5 POS 5.0 i love it
8254 Industrial_and_Scientific_5 POS 5.0 it is what it is
449 Industrial_and_Scientific_5 POS 5.0 Good product
3029 Industrial_and_Scientific_5 POS 5.0 Really easy to use, and really handy to have.
I confirmed this unit is UL listed.
up in your toolbox. They straighten up beautifully (although not perfectly) when called into action.
7042 Industrial_and_Scientific_5 POS 5.0 Excelente Product
2134 Industrial_and_Scientific_5 POS 5.0 great to hold things
7830 Industrial_and_Scientific_5 POS 5.0 Product as advertised, shipped quickly, very happy!
464 Industrial_and_Scientific_5 POS 5.0 I buy for bike repair and maintenance. Great, strong paper towels that are much stronger and longer lasting than regular kitchen paper towels. I almost want to wash, dry and reuse them.....
6815 Industrial_and_Scientific_5 POS 4.0 Great tone generator for identifying and troubleshooting phone and data lines. Constructed well and works great. Fluke makes high-quality electrical and signal test equipment. If you're going to need a good toner on a regular basis, it doesn't make sense to purchase an inferior tool. This one will stand up to rigorous, daily use.
6558 Industrial_and_Scientific_5 POS 4.0 I think this caliper is a dandy. It isn't as sturdy as the $125.00 digital calipers, but it doesn't cost $125.00 either.
2980 Industrial_and_Scientific_5 POS 5.0 Good nails.
2884 Industrial_and_Scientific_5 POS 4.0 Good.
6638 Industrial_and_Scientific_5 POS 5.0 This is the second stethoscope of this model that I've owned, you can hear bowel sounds when auscultating the heart.
5746 Industrial_and_Scientific_5 POS 5.0 This carriage was installed on a 10 year old non-magnetic limit switch opener. No issues with the fit or function. After installation the screw drive track was lightly greased (to avoid dripping old grease onto the garage door), and the opener is quiet again.
4592 Industrial_and_Scientific_5 POS 5.0 They are what they are- so they get the five star!
Ol' Dave said that!
7958 Industrial_and_Scientific_5 POS 5.0 Aluminum - just like you would expect. It's silvery colored and machines pretty well. Alloy 6061 is harder than pure aluminum but still machines fairly well. The surface is smooth but not polished. It can take a good finish.
As the advertisements suggest, this tape will stick to brick and virtually any other surface. Be careful though, because it might just strip the paint upon removal. This was the painful lesson I learned when trying to temporarily hold some video cables to my wall and ceiling. Even when using a hair dryer to soften the adhesive, I was not able to prevent the paint from getting ripped off, no mater how gentle I was.
Thanks for reading.
6809 Industrial_and_Scientific_5 POS 5.0 Bought for GF for her job to replace broken/missing unknown brand unit. Excellent Fluke quality.
The probe tips are standard 2mm with a semi-sharp tip and threaded base.
3030B 16Hz-2KHz ($175)
146 Industrial_and_Scientific_5 POS 5.0 If you purchase the can this lid is a must.
6303 Industrial_and_Scientific_5 POS 4.0 Works fine, screen could be brighter, and battery door could be more secure.
1053 Industrial_and_Scientific_5 POS 5.0 Perfect
8065 Industrial_and_Scientific_5 POS 5.0 best
7776 Industrial_and_Scientific_5 POS 5.0 Nice thing about aluminum stock, it is light for a metal, so shipping it doesn't seem so dumb. I liked these guys they shipped quickly and the price was good.
will cover the patch, & then it sticks well but is also ez to remove
555 Industrial_and_Scientific_5 POS 5.0 i first bought one of these back in the late 90s, on the advice of a friend who really knows how to shape wood. I was building a custom stock for a target air rifle using mainly rasps and scrapers, and my friend advised me that these bits easily carve through wood without excessive grabbing or tearing the surface. They cut very fast, too, using a light touch that doesn't load down the motor on your Dremel tool, and they last a long time. The price may seem high compared to, say, those little sanding drums that come with Dremel tools, but this bit will outlast dozens of the tiny drums and cut a lot better, too. Do your shaping with this bit, and save the little drums for finish wirk with fine grits.
6536 Industrial_and_Scientific_5 POS 5.0 I bought this caliper to aid in my 3D printing projects. The display window is large enough to read the numbers easy, and it can switch from mms to ins. with one button. Very satisfied with this purchase.
2350 Industrial_and_Scientific_5 POS 5.0 Not much to say, its just casing lube but it works great.... Spray it on, wait about 30 seconds or so and start pressing away...
6509 Industrial_and_Scientific_5 NEG 2.0 I gave this only 2 stars because it was working well but now it is not. I am not sure if something is caught in it or what, but it constantly stays on and the counter runs through random numbers. When it is working correctly, the digital display is very accurate down to the tenths, but I do not trust it anymore because of the issues I am having. It still works fine using it as a regular caliper and not using the digital display.
7995 Industrial_and_Scientific_5 POS 5.0 very nice for making bracelets. astm quality guarantees this is 99.9% pure copper. happy with this product. I have found the properties listed here
7468 Industrial_and_Scientific_5 POS 5.0 Great product good value.
4640 Industrial_and_Scientific_5 POS 5.0 Just what I expected! Perfect product at a great price.
I also replaced the banana jacks with better quality ones. If you really want to go all out, you can replace the resistors with better ones.
1748 Industrial_and_Scientific_5 POS 5.0 Perfect for my home shop.
6179 Industrial_and_Scientific_5 POS 5.0 awesome, buy some!
595 Industrial_and_Scientific_5 POS 5.0 good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good good
I've used Sonicare since before they were bought out by Philips. One thing I hated in over 15 years of owning them is the battery dying out, it lasts about 5 years, and I've gone through 3 versions already. While a new brush will hold a charge for over a week, after 3 years, it will give about 3 days sometimes not, so if you travel with the brush you'll also have to lug the charger, otherwise you'll have a useless brush with no power sometime in your trip. The brushes still use NiCD, so you get a memory effect and to revive it you have to recharge best when the brush is dead; to do so you have to endure the increasingly weak brush stroking and it dying sometime while you brush. You can't just leave it on, all Sonicare's have a 2 minute timer, Quad Pacer or not.
3077 Industrial_and_Scientific_5 POS 4.0 worked out of the package but no instructions on how to replace the batteries, I'll I know is that the opposite end is the battery cap but not sure how to remove it!
9276 Industrial_and_Scientific_5 POS 5.0 Exactly as advertised
8082 Industrial_and_Scientific_5 POS 5.0 Wonderful to be able to purchase this through Amazon with prime free delivery. Excellent quality product
2692 Industrial_and_Scientific_5 POS 5.0 Using it for years I feel its the best value in thermal paste. Unless its super exotic its all I use.
20 Industrial_and_Scientific_5 POS 5.0 As stated in another of my reviews, this just great!
734 Industrial_and_Scientific_5 POS 5.0 Nice quality medium duty switch for general use. I wouldn't use it for heavy or rough duty applications. But still a nice switch.
8165 Industrial_and_Scientific_5 NEG 1.0 Ordered 5/16" DIA but received 3/8" DIA. Item is in good condition, but unusable to me. Not worth having someone turn this to the diameter I need.
4116 Industrial_and_Scientific_5 POS 5.0 Excellent
6579 Industrial_and_Scientific_5 POS 5.0 Not one misfires at this time.
8284 Industrial_and_Scientific_5 POS 5.0 Used as a led light poll on my can am commander.
I also recommend that you allow 36 to 48 hours for the caulk to dry before you get it wet. The longer the drying period of time, the better off you will be. Clean-up was easy and the product wipes off with a damp sponge as long as you do it before it skins over.
#2. Since I rarely need it, this one use size is very convenient and less messy. I seldom need more for any application .
8015 Industrial_and_Scientific_5 POS 5.0 Exactly as described in listing. Received quickly!
5638 Industrial_and_Scientific_5 POS 5.0 This is a cut to fit roll. It will adhere tightly where most tape will fall off when wet or sweaty.
5602 Industrial_and_Scientific_5 POS 5.0 they fit exactly right - hold dirt and dust and then when it is time to replace them, they hold the junk inside rather than making a big mess as some cheap bags do, I've bought these a whole bunch of times and will continue to do so.
3821 Industrial_and_Scientific_5 POS 5.0 It's made for metal but works for many things (some slippery plastics can't be glued with anything). I have used JB weld for more than 25 years but for the last 12 years I switched to JB quick. It's not quite as strong (close though) but the original took 24 hours to harden.
People complain about lifting sheets onto the tool. Of course you have to slightly lift the sheet to get it underneath. I rest often rest them on my foot while I install the carry tool.
2128 Industrial_and_Scientific_5 POS 5.0 will work well
6093 Industrial_and_Scientific_5 POS 5.0 great quality - provides a very positive anchor
3150 Industrial_and_Scientific_5 POS 5.0 Works great.
8490 Industrial_and_Scientific_5 POS 5.0 Received on time. Works well.
5859 Industrial_and_Scientific_5 POS 5.0 This is very strong tape for when you need that. It's less useful a tape for duct work and anywhere that you want flexibility, but it's strength makes it very useful overall.
2611 Industrial_and_Scientific_5 POS 5.0 Awesome product, Awesome savings
1442 Industrial_and_Scientific_5 POS 5.0 Over the last month, we used this clear packing tape to send a number of crucial internet purchases to buyers across the U.S. It works as advertised. There's very little waste because it's thick enough to reduce mishandling, and sticks well enough to save from overlapping or doubling it up.
1536 Industrial_and_Scientific_5 POS 5.0 Arrived on time, as pictured, and works great.
2) This has a limited shelf life and you probably don't need as much as you think. PU glue foams up and you use a LOT less than other types of glue. 4 oz should be more than enough for most people, 8 oz is a BIG bottle - I can't even imagine buying the 16 oz bottle. PU Glues suck moisture out of the air so unless you plan on using it up within a year or two, a LOT is going to go to waste. Don't ask me how I know this.
8184 Industrial_and_Scientific_5 POS 5.0 This was packaged well and just as expected.
4734 Industrial_and_Scientific_5 POS 5.0 I'm always impressed with 3M's products as I live in the Midwest near where these products are made. I like to support the US economy so it only makes sense that I'd buy a quality American made product like this. It's not something that you buy at a chain store and it's cheaply made or doesn't work as it should, this is how it should be built. In fact, I bet you that your doctors and nurses use this exact model as it's the standard in the medical field. I sure noticed how many carry this exact model in various colors once I ordered one. It's well worth the price and I'd buy again.
177 Industrial_and_Scientific_5 POS 5.0 Trash cans deserve to have their contents concealed. This is the companion lid for the Rubbermaid Brute 32 Gallon commercial trash container.
8914 Industrial_and_Scientific_5 POS 5.0 Depending on your particular application, this material deserves consideration. It's strong enough to thread screws into, non-conductive, and cuts with any decent saw. I used it to make the front for a switch panel, and it's just what the doctor ordered. Since it's translucent, you can even backlight it with a simple light bulb. Really cool...
3714 Industrial_and_Scientific_5 POS 5.0 Great extender, just as expected.
9177 Industrial_and_Scientific_5 POS 5.0 Innovative product and easy to use.
Now I can see how thick of my shower arm is with out wondering the quality or guessing
1246 Industrial_and_Scientific_5 POS 5.0 I have bought nails at the big box store and the plastic strips ALWAYS are poor quality and I get misfeeds. These have never caused a problem.......about 5 boxes through my Hitachi so far a NO issues.......
2524 Industrial_and_Scientific_5 POS 4.0 Their good I guess. Nothing to compare it too. Their is the usual disclaimer.
514 Industrial_and_Scientific_5 POS 5.0 did the job
2573 Industrial_and_Scientific_5 POS 5.0 Worked PERFECTLY ! Highly recommend
5247 Industrial_and_Scientific_5 POS 5.0 caulking gun. This was so easy we should have done the bath sink over 10 yrs ago when we moved in. Prev. owner had set a new sink into cabinet - Never cleaning the crud from counter top and then sealing with a clear - may be able to locate a pic of that - will add pic of new -
For a company like 3M, which generally sells some of the best products, to have such a lapse in QC and allow this type of inferior product to hit the market is sad. I will not be purchasing this tape again, or any 3M brand packaging tapes for a while, in the hopes that they correct this problem.
Hz = Hertz (1/sec frequency)
I decided to try this step bit and see how they worked. It was fantastic! I drilled a large enough pilot hole with a twist bit, and then started feeding the step bit in the hole. It cut smoothly and did not bind up at all. The hole it made was perfectly round and no burs left on the front side. It did leave burs on the backside of the metal, but I simply did a very light drill with this step bit on the back just enough to knock off the burs. Presto...a clean wonderful hole was drilled quickly. I am now a true believer in step bits.
it flexes and it is way to easy to foul the tape.
5986 Industrial_and_Scientific_5 POS 5.0 Works great. One note: This is closed-cell foam, so it has air in it, so it floats in the sealant. Therefore cram it down into the crack so it's held by friction. If you just lay it in, it'll float up and show above the level of the sealant.
1916 Industrial_and_Scientific_5 POS 5.0 Works
2613 Industrial_and_Scientific_5 POS 5.0 restocking my depleted stock.... good quality as expected.
It has a heating unit that dries it out by plugging it into the wall vs baking in an oven for hours
4397 Industrial_and_Scientific_5 POS 5.0 These are very heavy duty pads for the commercial mop we purchased and I highly recommend them!
8665 Industrial_and_Scientific_5 POS 5.0 did the job.
1279 Industrial_and_Scientific_5 POS 4.0 I love clean carpets - but have dogs. Now my dog's don't have accidents in the house but they do shed and with all of the rain there has been a lot of mud. So out of the box this was easy to assemble by myself. There were only two screws that had to be put in (so you do need a screwdriver) and once that was done, getting this ready to run was easy. I already have a carpet cleaner - but courtesy of the aforementioned dogs, the plug was chewed off of it. This cleaner did just as good of a job as my old one, though it was a tad lighter. I do think that it is made of a cheaper plastic than my old one so I don't know how well it will hold up in the long run - but I also don't see anything concerning about it. On the whole I am very happy with the job this does.
2969 Industrial_and_Scientific_5 POS 4.0 nice product and i like it.
8688 Industrial_and_Scientific_5 POS 5.0 works great
This is the only type of tie-down I use, and this one is of very high quality. (I trust it to hold an $1,800 fishing kayak atop a car, traveling at 70 mph.)
1091 Industrial_and_Scientific_5 POS 5.0 Great L bracket, durable and has a nice finish.
6902 Industrial_and_Scientific_5 POS 5.0 They were of perfect quality for the price I payed. Much better than the cheap ones at Walmart or other auto stores.
does not include the nuts
1666 Industrial_and_Scientific_5 POS 5.0 I like the design - these units have a large load capacity and looked to me to be rugged enough to last (I'm using them on a custom designed stool that rolls around my shop). My only problem is the way the caster attaches - It uses a relatively short METRIC stud, and the hardware was not included. But I can't blame the caster for that - I should have bought the version with a mounting plate in stead of the stud.
5241 Industrial_and_Scientific_5 POS 4.0 package says it can caulk 2 bathtubs- I ran out after doing one tub and barely beginning the shower- this SUCKS when you have only one bathroom & it's a 72 hour cure time... Waiting for more to arrive & I will be "bird bathing" in my sink for an entire week :p GET EXTRA! That being said, was extremely easy to use & easy clean up but I would wear a respirator for organic vapors- the fumes are intense!
7600 Industrial_and_Scientific_5 POS 5.0 Used for cut off finger tip been working very well make healing fast getting more for other cuts
5505 Industrial_and_Scientific_5 POS 5.0 great product
5566 Industrial_and_Scientific_5 POS 4.0 they are made with a lighter material than the ones in the auto parts stores, but are still a good value.
3292 Industrial_and_Scientific_5 POS 5.0 wire nut
5753 Industrial_and_Scientific_5 POS 5.0 This is an easy part to replace. It took me about 10 minutes and a few minutes to get the tools out and clean up after. My old one started to go bad about a year ago and when it failed completely, I ordered this and it came in a couple of days. I didn't want a knock-off part, so getting it from Genie was important. Replacing the part yourself is a lot cheaper than hiring someone to do it.
3101 Industrial_and_Scientific_5 POS 5.0 Cheap and user friendly, what more can you ask for?
966 Industrial_and_Scientific_5 POS 5.0 This brush is great for what I'm using it for. Cleaning up the live edge on a slab of mango. If you have any uneven edge, this will get it cleaned up and along with the other grits will take you from rough to finish. The bristles are impregnated with an abrasive and are nylon so it won't leave those pesky metal wires all over. Made in America and a little expensive but it's worth it.
the kit could use alittle more medium wire sizes and less small ones, but a good kit in all
8034 Industrial_and_Scientific_5 POS 5.0 Unpolished but smooth - no rough spots, can be used as is. Great quality rods. Fast delivery too.
6233 Industrial_and_Scientific_5 POS 5.0 Received on time. Reliable and simple to use.
Bravo Shop-Vac. A great product. Thank you.
9587 Industrial_and_Scientific_5 POS 5.0 Nice item.
The inside diameter of the larger bell end is 3.977 inches. It tapers to 3.665 inches, which is the ID of the small end, which is straight walled as opposed to the tapered bell end.
9918 Industrial_and_Scientific_5 POS 5.0 This is a nicely designed bench top power supply that features dual output channels that are fully adjustable form 0 to 30 VDC and 0 to 5 amps. There is a third channel that is fixed at 5 VDC at 3 Amps. The dual channels can to set to independent or in parallel or in serial mode. In that manner you can get up to 10 amps or up to 60 VDC. The unit weighs 20.2 pounds and it has a massive multi-tap transformer to allow the relay matrix to select and use the right voltage output to send to the voltage regulators.
458 Industrial_and_Scientific_5 POS 5.0 Been using these for years, very tough.
3489 Industrial_and_Scientific_5 POS 5.0 I am giving this to my grand daughter for Christmas. She is wanting to grow up and be a vet, so I am getting her ready now. She is 7. I know she is going to love this.
1986 Industrial_and_Scientific_5 POS 5.0 good tool to have in your tool inventory
1377 Industrial_and_Scientific_5 POS 5.0 fine.
5542 Industrial_and_Scientific_5 POS 5.0 A very good price and the quality seems to be the same as the name brands. Prompt delivery and came in good shape.
FROM 3 XYZ AXES METER READINGS:
9102 Industrial_and_Scientific_5 POS 5.0 Great product and I use it all the time especially on the exterior of the grill. Don't waiste money on stainless grill cleaners. WD40 is perfect for that and easily cleans plus protects the entire exterior.
Get the Blue Camco hose ( the one I have is great),....or better yet, go get a 100' hose at Costco for $20 (appx) and run the water for a few minutes before installing.
2320 Industrial_and_Scientific_5 POS 5.0 Only my experience, but have used the plastic bag method for 223. With over 2000 cases reloaded, never had a problem. However I just stated with 30-06 and did not work, stuck case. Found that the bigger cases need a different product. Again just my experience.
4964 Industrial_and_Scientific_5 POS 5.0 Beats the price at the big box stores- hands down. I got my purchase fast and was able to use this to cut the top off of one of my kegs to make a keggle. I highly recommend this item.
Absolutely will buy this again if I need more. Excellent deal and excellent quality.
Master reflex hammer?
8814 Industrial_and_Scientific_5 POS 5.0 This is my go to choice for wire weaving. Love this copper wire. Beautiful and bright copper. I have ordered several different sizes.
5785 Industrial_and_Scientific_5 POS 4.0 Really good Tape Last longer and stronger that Gray
1822 Industrial_and_Scientific_5 POS 5.0 Kreg is the best
7031 Industrial_and_Scientific_5 POS 5.0 Copper plate. Some scratches but who cares. Enough said.
- HIGHLY INACCURATE for LOWER EMF readings .. a fixed +/- 8.3 milligauss (mG). Since most suggested defensive limits for extended exposure are 1mG-2mG or so, this greatly limits its utility. See paragraph above under "The Achilles Heal of this instrument.." for more detail.
1380 Industrial_and_Scientific_5 POS 5.0 It's clear, strong, and sticky what more do you need.
Anyone ever wonder who licked off all the ice cream to make all these ? lol
2852 Industrial_and_Scientific_5 POS 4.0 it's black plastic; it is the size listed and it does what it is supposed to do
853 Industrial_and_Scientific_5 POS 4.0 This Dewalt wire brush is decently made and works well in both my drill and die grinder. The bristles are stiff enough to remove light rust and paint scale without gouging metal beneath like a knotted brush can sometimes do. It seems to be retaining its bristles well and is holding up to my use, so would certainly buy again when needed.
5712 Industrial_and_Scientific_5 POS 5.0 I have always appreciated the 3M brand. there is little to say about this stuff other than it is sand paper, and it doesn't fall victim to clogging and such like cheaper brands do.
Once again I find myself recommending Anderson fittings. They are a respected U.S. company that manufactures a quality product at a decent price. You can't ask for more than that.
3602 Industrial_and_Scientific_5 POS 5.0 Let me start by saying the problem with this tape as it doesn't stick to itself. Not an issue at all if you are just taping up boxes and such. For that, I give it 5 stars. But I use it on RC planes and if you have to put one layer of tape over another, it won't stick. Didn't think about that part when I ordered.
7951 Industrial_and_Scientific_5 POS 5.0 Product as advertised, shipped quickly, very happy!
1750 Industrial_and_Scientific_5 POS 5.0 These are great for the ends of your hose. Clamp them to the end of your hoses and push the hose on where ever it goes. Machine output or vac input.
fit.
5818 Industrial_and_Scientific_5 NEG 2.0 Disappointed with the lack of adhesion. Was trying to cover a few wasp holes in the bare wood frame that I made for grape vines. Sure I could have used many different substitutes to fill/cover the holes, but I thought that this brand would at least keep the peskie yellow jackets out of the holes until I acquired something better. The wood frame is bare, dry and smooth and thought that it would be good enough to attach a few pieces of the tape over the offending holes. But within a few seconds the tape started to curl at the edges and although it did not fall off altogether, it simply made for an open door for the annoying intruders.
6129 Industrial_and_Scientific_5 POS 5.0 work fine
That tiny glue has exceeded my expectations. Recommended for tough works...
2111 Industrial_and_Scientific_5 POS 5.0 This worked real well, but the cap is now permanently attached to the body. Make certain you carefully clean them off before closing.
9080 Industrial_and_Scientific_5 POS 5.0 Awesome product
I like the square drive almost as well as torx. Either is better than Phillips or Straight Blade.
1973 Industrial_and_Scientific_5 POS 5.0 dang this stuff made my kitchen bomb proof
2202 Industrial_and_Scientific_5 POS 5.0 Is very strong. Seems to hold very heavy items in place very well. Also, holds small items as well. Needs a better delivery system as well.
3819 Industrial_and_Scientific_5 POS 5.0 JB quality!!
- do not be upset about the half-time situation, a billion years is a long time
1717 Industrial_and_Scientific_5 POS 5.0 I have a small woodshop so floor space is at a premium. Used these casters to put wheels on a table and band saw. They work well and the locks hold better than I expected. Getting new tools so will need to buy more. I like the locking mechanism, much easier to set and release than the rocker arm lock affixed to the axle of common casters. And, it locks the swivel too. I used two of the non-swivel casters on the back of my sliding miter saw and it stabilized the table very well while keeping it easy to move. No point to using four of the swivel type, which makes the table less stable.
6358 Industrial_and_Scientific_5 POS 5.0 Fairly accurate! I measure mostly filament and objects to be turned into a 3D print. Works great!
4007 Industrial_and_Scientific_5 POS 5.0 Perfect transaction and product as promised.
4222 Industrial_and_Scientific_5 POS 5.0 Came on time with no damage - small enough to haul around w/o back strain - powerful enough to pick up everything - assembly was not an issue [3 minutes] - use is simple big red ON switch - not as much problems with clogging or fitting the top to the canister when dumping crud - overall would recommend to anyone..
2780 Industrial_and_Scientific_5 POS 5.0 This worked perfectly for me. Still, with shipping it cost more than to buy it locally.
9869 Industrial_and_Scientific_5 POS 5.0 No need to buy anything else.
The Sonicare FlexCare is the latest incarnation of Sonicare's Power Toothbrush. If, however, you already own the Philips Sonicare Elite, you'll be happy to know that the Sonicare Elite works just as well as the Sonicare FlexCare. The differences are (i) The Sonicare FlexCare comes with a UV sanitizer for sanitizing the brush head. (ii) The diameter of the brush handle of the Sonicare FlexCare is smaller and provides a more confortable grip, especially if you have smaller hands.
5413 Industrial_and_Scientific_5 POS 4.0 As advertised.
1121 Industrial_and_Scientific_5 POS 5.0 Shipped quick and works great
3716 Industrial_and_Scientific_5 NEG 2.0 I bought this knowing it would probably be very stiff in cold weather since the chemicals used to keep vinyl hoses pliable are not allowed in drinking water hoses. But, even after stretching it out in the sun for a few days, it snaps into a tight coil, especially when it's cold out. It's usable but you do have to wrestle with it and getting it out to it's full length take some work. I do not know if there are more pliable potable water hoses.
293 Industrial_and_Scientific_5 POS 5.0 Works
5703 Industrial_and_Scientific_5 POS 5.0 Tool works great and was a needed accessory when changing my shocks...although I first used the wrong end of tool and broke off tip of shock and was able to break rod off to remove..after figuring out the correct fitting end to use it worked very well and cut my install time in half! Definitely recommended if your doing your own shocks..
2 1/2" Curved Pegboard Hooks (count of 6)
1390 Industrial_and_Scientific_5 POS 4.0 I have the large version of the hand-held tape machine, but it's hard to deal with; so I went to the BASICS and found this to be exactly what I needed. No fighting with this dispense.
I love the ability to drape my dishcloth on the hook to dry.
774 Industrial_and_Scientific_5 POS 5.0 handle the high current about 15 amps no problem with heat.
1504 Industrial_and_Scientific_5 POS 4.0 Not much to say about the spray bottles, except that they work perfectly fine and it was a good value being able to get all 3 for the price.
9101 Industrial_and_Scientific_5 POS 5.0 Got to have it
3479 Industrial_and_Scientific_5 POS 5.0 IT WORKS GREAT!!!
* it automatically turns on when you move the slider. (i kinda like that feature. i lock it in place when i turn it off though)
9041 Industrial_and_Scientific_5 POS 5.0 Good brads at a much better price than the big orange store.
Where this product shines is on uneven surfaces, say like the bottom of a printed circuit board, with this *Liquid Tape* I am able to cover the bottom of a PCB, then paint some on the mounting area and I was able to mount a circuit on a metal plate without using standoffs and there were no shorts. I also purchased the black version: Gardner Bender LTB-400 4-Ounce Black Liquid Electrical Tape. That makes for easy poloraity identification.
9681 Industrial_and_Scientific_5 POS 5.0 Not having to fool around and make sure that you get the cap back on straight as I had to do with my 1 and 2 oz. bottles of hobby glue, and not wasting but a small amount per application makes these well worth the money.
659 Industrial_and_Scientific_5 POS 5.0 Works as expected.
3578 Industrial_and_Scientific_5 NEG 1.0 I find this duct tape no better than the cheap duct tape you'll find on sale at The Home Depot or Lowe's.
7728 Industrial_and_Scientific_5 POS 5.0 The Nashua 357 series tapes are extremely strong and sticky - typically, if you let it stick to itself, you just throw it away. Too hard to separate! As with any duct tape, the surface must be clean and dry to properly adhere, and adhere it will. Have used this series in my HVAC business for years.
8280 Industrial_and_Scientific_5 POS 5.0 I have not yet used this but it looks good and is exactly as described.
1206 Industrial_and_Scientific_5 POS 4.0 soso
If the drill is spinning but isn't actually slicing through the metal, all you'll do is work-harden the steel and wear out the bit.
14 Industrial_and_Scientific_5 POS 5.0 Good product. I stick a length to my workbench where I carve and use my Dremel. Handy for the poor mans jointer trick too.
4177 Industrial_and_Scientific_5 POS 4.0 cant beat the price but I did have to use a little sandpaper to clean up the sides that receive the blade (they were a little rough and did allow the blades to slip on as they should only took about 30 seconds)
If you have arthritis in your thumbs like I do, the big rivets aren't too fun on that last squeeze, though. :) But it's the nature of the beast.
250 Industrial_and_Scientific_5 POS 5.0 I would reccomd these nails for anybody who owns a nial gun to use on thier next project, buy now.
8367 Industrial_and_Scientific_5 POS 5.0 Good product.
1134 Industrial_and_Scientific_5 POS 5.0 Good foil tape. Great for dealing dryer vent tubing to keep in place.
3" 35mG
We did, however, have a better experience with
7567 Industrial_and_Scientific_5 POS 5.0 Give it time, it'll bore through any light-weight material.
7767 Industrial_and_Scientific_5 POS 4.0 Terrific way to get solid stock metal. Just got a hobby lathe and this material was perfect for some test / learning cuts.
2964 Industrial_and_Scientific_5 POS 5.0 It took me about 4 hours to put this together, but I took my time in the construction process.
The toothbrush has held up, so it won't die because of leaking or bad battery. For $25, this unit is an ideal Sonicare. Now if only the brush heads were cheaper.
8587 Industrial_and_Scientific_5 POS 5.0 Strong, and beats the H==l out of duck tape. Long lasting, thicker and did I mention, it sticks to almost anything.
1358 Industrial_and_Scientific_5 POS 5.0 This belt is excellent. It's REALLY quiet! I'm going to order a couple of more as backups.
Super easy!!!
8242 Industrial_and_Scientific_5 POS 5.0 This material has good machining characteristics. Easily drilled, cut, milled or turned in a lathe. 6061 aluminum can be welded as well.
4594 Industrial_and_Scientific_5 POS 5.0 heavy duty
2765 Industrial_and_Scientific_5 POS 5.0 This is a great product and it is the only thermal compound that i use on my computer. I will definitely continue to buy the Arctic Silver brand in the future.
The Aluminum rods were perfect for our project.
4255 Industrial_and_Scientific_5 POS 4.0 Bought for my sister for she likes to make small craft items for her flee market sales . Very sharp and hod up .
4280 Industrial_and_Scientific_5 POS 5.0 One of the major problems with rolling toolboxes is that they are constructed of steel. Inevitably over time they get dinged, dented, and then start to rust, particularly if utilized in a damp environment. This product, on the other hand, is an extremely sturdy plastic; if it ends up sitting in a couple of inches of water when the garage or basement gets some water, it won't suffer as a result. There's no "give" to the plastic - I tried using the top surface as a ladder, standing on it (probably not recommended by the manufacturer) and there was no give at all. The drawers pull out smoothly and easily, even when weighted down. There are some intelligent design features here, such as the little indentation that will catch a rolling pencil before it rolls off the top, or the easily swiveling rubber-coated wheels. There is a minimum of construction necessary when the product arrives....attach the four wheels (a driver drill is a big help here), the handle, and the handy AC strip and you're ready to go. If you decide that the unit is going to be in a fixed position and will never be moved, you can leave off the handle and the wheels; the unit has an underside design that allows it to sit flat and firmly in position without the wheels.
4301 Industrial_and_Scientific_5 POS 5.0 Quality was Great. Pricing was great, delivery was quick.
4524 Industrial_and_Scientific_5 POS 4.0 This aneroid works very well. It's easy to use, the trigger for releasing pressure is smooth, and the bulb fills the cuff rapidly. I would have given it 5 stars if only it had a back-lit or glow-in-the-dark dial so it could be read in low-light conditions.
1884 Industrial_and_Scientific_5 POS 5.0 GREAT PRODUCT, I'VE BEEN USING FOR YEARS. NO COMPLAINTS, PRICED RIGHT !!!!
It's not often I put credence in "home remedies" but I do know there are some out there that really work. After finally working up the courage / desperation to try this... I find that yes, as the wives-tales tell it-- WD-40 REALLY DOES help arthritis, sore muscles and tenitis. I have no idea why it works, but it does work. I 've experienced no side effects and a whole lot better feeling elbow.
Lots of good information about safety and maintenance in it also.
4291 Industrial_and_Scientific_5 POS 4.0 ok
518 Industrial_and_Scientific_5 POS 5.0 fast ship works good
9765 Industrial_and_Scientific_5 POS 5.0 Good glue fior some thing.
Now I can get different lengths and shapes of steel, aluminum, etc. shipped for free (and quick!) with my Amazon Prime membership.
6702 Industrial_and_Scientific_5 POS 5.0 The first thing I was surprised by was that fact that my EMT instructors noticed my stethoscope and commented in front of class that I would have no problem with this brand of stethoscope. It sets you apart as professional when you use professional equipment. I found it much easier to here lung sounds with this stethoscope than with the standard cheap ones we have in class.
7528 Industrial_and_Scientific_5 POS 5.0 ok
WHEN TO USE JB-WELD
8093 Industrial_and_Scientific_5 POS 5.0 Shipped rust free and straight. While it didn't work for my intended use, it's an excellent product.
7171 Industrial_and_Scientific_5 POS 5.0 Arrived on time and as advertised
9620 Industrial_and_Scientific_5 POS 5.0 The Loctite brand name has been around a long time. Every mechanic, shade tree and otherwise, should have this on hand. Keeps all threaded items, particularly spark plugs from freezing up for later removal. Highly recommended, and a size you won't run out of anytime soon.
The flap valve allows for full flow with no bottleneck. It comes with four hose clamps that are of good quality. The housing is plastic, but thick enough that it is sturdy. Very easy to install.
9610 Industrial_and_Scientific_5 POS 5.0 I have this in my garage, I bought a bunch of single fold towels and needed a dispenser. Georgia-Pacific was great on here showing me exactly what I need. Love having this in my garage! Stainless is a good look there.
9182 Industrial_and_Scientific_5 POS 5.0 like it
670 Industrial_and_Scientific_5 POS 4.0 no issues
4401 Industrial_and_Scientific_5 POS 5.0 A while back I purchased this "Keeper 25' Tow Strap" when I was having some difficulty with my SUV, for insurance. However, never had to use it for that and, instead, it paid for itself when used helping my son with a stalled vehicle. Since then, though, I've used it with a come along to direct the fall of a tree. Purchased locally at a big box store and I, now, think of it as a necessity. Can't be misplaced because of it's loud color and It takes up very little room in the trunk. Great to have when the need arises and just recently purchased again, for my son. (Max. Vehicle weight 5K lbs.)
4877 Industrial_and_Scientific_5 POS 5.0 Ive ordered a number of different configurations of these threaded brass fittings and adapters for my small, 150lbs air compressor I use in my garage. Each one came with a well-machined thread but other than one item, (for which I ordered 3), all the other fittings came without thread protection.
1226 Industrial_and_Scientific_5 POS 4.0 The nails and carrier are of expected good quality. I do have a problem where consistently the last 3 nails in the carrier cause a nail gun jam. I am not sure if it is the fault of the nail gun or the nails. I am a new user of a framing nailer and have been through a box of these nails and every last strip fired great except for the last 3 nails on each strip. Being a new user this is my first framing nailer and first time using these nails. Love 'em until the last three :) but no idea if my issue is nail supply or nail gun related. I suppose I will try different nails next time to see if the same thing occurs and if so, then the nail gun is the issue.
2810 Industrial_and_Scientific_5 POS 5.0 This is clearly the best thermal paste out there!!! I put it on every cpu and gpu I have in the house!!! Highly recommended!!!
4473 Industrial_and_Scientific_5 POS 5.0 This is vaery good assorment of peg board hooks and accessories. I bought this assortment primarily for the retainging clips.
5955 Industrial_and_Scientific_5 POS 5.0 If you have never used gaffers tape, you should have. I seem to have another new use for it almost daily. Much better than regular cloth or duct tape as it can be removed w/o residue.
4180 Industrial_and_Scientific_5 POS 5.0 These arrived quickly and the price was great. I'm pleased. I expect to use these in hobby-crafts where I expect to be a regular cut-up
8897 Industrial_and_Scientific_5 POS 5.0 Used on a 60" drawers for a truck bed. Glides smooth as glass for the weight on them.
2616 Industrial_and_Scientific_5 POS 5.0 Exactly what I wanted. Works very well.
9489 Industrial_and_Scientific_5 POS 5.0 Great item. Worked perfectly for my pump. I pre-installed on my 1" pipe and got everything ready to go into the 4" pipe and when I got to the torque arrestor we realized what we guessed was 4" was actually much larger. My wife loosened the upper clamp until it would slide into the tube and then re-tightened the clamp. Worked like a charm. Would buy again if I needed to. Would recommend fully to anyone needing one of these. This item will also mount on a 1 1/4" pipe.
777 Industrial_and_Scientific_5 POS 5.0 as advertised
It is plastic but seems sturdy enough to last if you don't abuse it or run the truck over it. I like the idea another poster did adding sandpaper to create a non-slip grip on the panel as on an incline or stairs the sheets do tend to want to slip and that is a bit dangerous trying to capture an errant panel and not fall down the stairs yourself.
Well, when she took it to the Mercedes dealer she found out that replacing the little antenna would cost in the neighborhood of $500-600. Not only would the part have to be replaced, but the car interior would have to be removed in order to do so. Furthermore, the antenna wasn't used for anything in that my friend had neither a phone nor a GPS system as a part of her car accessories. The only benefit in replacing it would be cosmetic. The service manager suggested that the duct tape should work fine, except that we might use black duct tape since the antenna was black and it would be much less apparent. So, my friend went to Home Depot and asked for a real tough black duct tape. They gave her a 2"x12' roll of Gorilla Double-thick adhesive tape. I took the old tape off and applied the new Gorilla Tape.
6813 Industrial_and_Scientific_5 POS 5.0 If you are in the business of phone or computers, sooner or later you will need this tone. The price is reasonable and you cannot live without one in the networking field. Make sure you have an extra set of batteries handy, and there might be long periods between use.
I want to thank the seller
4880 Industrial_and_Scientific_5 POS 5.0 Another quality brass fitting - not leaky junk as some of the cheap products. Threads are good and there is very little air leakage even when Teflon tape is not used with the fitting. I do use Teflon tape but I test without it to test the quality of fittings.
3766 Industrial_and_Scientific_5 POS 4.0 I had to relocate two 30 gallon emergency water barrels and my two 25 ft. hoses didn't reach far enough to refill them. I had a choice of buying another 25 ft. hose and joining the three together of just going for a single 75 foot hose. I opted for the latter and I'm glad I did. The original hoses were flimsy ACE Hardware brand (white with a blue stripes) and the end connectors, although kept in the garage, were beginning to corrode. The Camco hose has a much thicker reinforced wall and only cost $14 more than another ACE 25 footer. This is a nice hose and my only complaint is that it was covered in some sticky residue that I had to clean off before using.
4013 Industrial_and_Scientific_5 POS 5.0 Works fine
simple idea, excellent result
2346 Industrial_and_Scientific_5 POS 5.0 great stuff, leaves no nasty oily film on case no need to clean case after use.
610 Industrial_and_Scientific_5 POS 4.0 Good quality electrical tape. Shipped quickly.
3040 Industrial_and_Scientific_5 POS 4.0 I had used up my box of 500 screws, so needed these to have around. They came packed in a plastic box that I found aggravating to open, even after the locking tabs were removed, so I dumped the screws into the old cardboard box that the previous batch came in. Wife wanted the new box for sewing odds and ends, or it would have gone in the recycle bin. If you're throwing the box around in back of a truck or trailer, the plastic might hold up better over time. But the screws are a good product.
3592 Industrial_and_Scientific_5 POS 5.0 This duck brand packing tape really is easy to use - better than most.
8951 Industrial_and_Scientific_5 POS 5.0 I searched and searched for HDPE and/or Teflon. Since HDPE is much cheaper, and has a very low friction coefficient, I choose this product. This is the best price I have found out there, even beat my local plastics supplier. I purchased this produce to line the inside of a project I'm working on where I need to very easily side an acrylic tray in and out. This product did the trick, I'm very pleased.
This is great quality stuff. It's firm, fills the gaps and stayed in place while I caulked over it (the staples helped). Okay, maybe I'm not really an expert after watching a couple of videos but I have to say, beginners luck wasn't so bad and this stuff helped
7472 Industrial_and_Scientific_5 POS 5.0 Us
The first batch came from "WelDun Solutions" the second batch came from "VetMed USA" a distinction that didn't even cross my mind until I opened my second shipment.
8722 Industrial_and_Scientific_5 POS 5.0 Lo adquirí por otra via ya que necesitaba ajustar el motor del EL GENERADOR ELECTRICO portátil a 3.600 RPM para obtener los 60 Hz de Frecuencia de 120 V. Lo recomiendo para hacer este tipos de ajustes segun El Fabricante y lograr el mejor Desempeño del Equipo.
2614 Industrial_and_Scientific_5 POS 4.0 As advertised.
4th, let the casing breath (I dump them on a paper towel or cardboard box) for about 10-20seconds, or just leave the top of the bag open.
2136 Industrial_and_Scientific_5 POS 5.0 I was looking for long forceps to use with feeding snakes and this 16" works like a charm, mine came with a few nicks and maybe a slight bend but for what I'm using it for 5 Stars.
887 Industrial_and_Scientific_5 POS 4.0 Good for what I needed them for. A little pricey for the quality.
9519 Industrial_and_Scientific_5 POS 5.0 Shipping was lightning fast, the product is perfect for what I wanted. There are three bushings that all fit inside one another, depending on what size arbor you have and what size wheel opening. I use this for a deburring wheel with a 1" opening on a grinder with a 5/8 arbor.
8948 Industrial_and_Scientific_5 POS 4.0 Works pretty good for our intended purpose of using it as a hole punch surface. Found we needed to clamp it down better to make it work best.
2836 Industrial_and_Scientific_5 POS 5.0 As many of you know, silver-based compounds are superior to silicone bases for CPU heat transfer. I can tell you that Arctic Silver 5 proves this to be the case. I read the customer reviews on Radio Shack's site and they all praised the RS silicone compound, but it does not work sufficiently for modern machines in my experience.
3660 Industrial_and_Scientific_5 POS 5.0 Exactly as advertised. Hope the plastic coupler holds up in the Florida UV.
8172 Industrial_and_Scientific_5 POS 4.0 A solid choice, excellent depth, smooth finish. Hints of Manganese and Copper. I'd give it 98 points of Aluminum. Fully aged, ready to go today!
7304 Industrial_and_Scientific_5 POS 5.0 Great quality product. Works !!!!
If you are considering these to have around , just buy them, I bough a few pairs just to have them as back ups as well. They work great for removing bandages SAFELY, I wish I had these when I was changing out a bandage on a wounded pet three times a day - they make it SO much easier. Going to put a pair or two out in the tack room as well for when we wrap the horses legs.
This copper rod was no exception.
2495 Industrial_and_Scientific_5 POS 4.0 Is it perfect? No it wobbles on low. Does it suck the crap out of the air. Oh hell yea it does! On high its hold your hat boys. Its suck the crap out and watch the dirt fly. We made a 2x6 extension to go around it and put a nice charcoal filter to go over it. It filters bad air when we use bad stuff and we use a regular filter when we want to suck out dust and cwap, Yes cwap. That way the fan itself will last longer. The wobble doesn't hurt a thing and you cant hear it. So no worries mate.! Geat purchase.
7750 Industrial_and_Scientific_5 POS 4.0 I am sure these are great anchors but I use them for snap caps in my .22 revolver where they fill the need I have for protecting the firing pin while dry-firing my double action revolver and working on trigger control. I have some aluminum ones that are relatively expensive and do not last as long as these plastic ones. I'd recommend them for either roll, snap cap or anchor.
9268 Industrial_and_Scientific_5 POS 5.0 Call me Mr. fix-it, but I have to have all kind of nuts, bolts and fittings, and these fit the bill for the occasions when I have to have an allen head set screw, which is more often than you might think. Good quality item.
Here are my observations:
2081 Industrial_and_Scientific_5 POS 4.0 Work good. It do not over tighten them I broke both of mine on gun barrel
3305 Industrial_and_Scientific_5 POS 4.0 They're wire nuts, what can you say? They hold the wires together
7888 Industrial_and_Scientific_5 POS 5.0 Got this for making AR-15 (A1 buffer tube) adapters for using M4 buffer & spring assemblies. Turned on lathe to proper diameter & cut to length; material cut smoothly. Quality stock material with no voids or flaws. Came cut to exact 12" length. Save me money & wasted material in long run buying through Amazon for short lentgths. Recommend iit for those who need such stock.
I relate this because it also seemed counter-intuitive when working with heavy-duty mega-glue. Don't be afraid to get your hands dirty -- even use your fingers as an application tool, if you want. You can become a sculpturer with this. Manipulate the maleable epoxy till it looks like it forms your strongest bond, otherwise you'll be like a batter who's afraid of the ball.
6654 Industrial_and_Scientific_5 POS 5.0 Probably the best on the market, this is replacing a littmann that was 16 years old. If your just doing blood pressure and lung sounds this is probably overkill but for heart sounds it is clear and concise and the go to stethoscope.
The quality is fantastic. Very sturdy, thick, fits the base perfectly. Only thing that sucks is the price -- almost $40 for this is ridiculous
3462 Industrial_and_Scientific_5 POS 5.0 This was a good deal and fast.
1662 Industrial_and_Scientific_5 POS 5.0 Somethings you just can't go digital and with a dial gauge I find that you can't get a feel for the movement with a digital clock gauge. This one is good value in a nice case.
5395 Industrial_and_Scientific_5 POS 5.0 Good fitting
7094 Industrial_and_Scientific_5 POS 5.0 great price
6199 Industrial_and_Scientific_5 POS 5.0 They were of perfect quality for the price I payed. Much better than the cheap ones at Walmart or other auto stores.
5250 Industrial_and_Scientific_5 POS 4.0 I didn't want to pay the high price from a local woodworking store for the perfect connector and was happy to find these at a more reasonable price. I bought these for dust collection and was disappointed that I didn't take the time to read the specs. Had I done that I'd have noticed that these are too large. As someone else answered: "Inside diameter is what the outside diameter of 4 inch pvc s 40 pipe is"
763 Industrial_and_Scientific_5 POS 5.0 Heavy duty, love screw terminals
My vacuum motor was fine but the hose became cracked and leaky. I applied this duct tape and saved the cost of a new vacuum.
8715 Industrial_and_Scientific_5 POS 4.0 Works fine.
7143 Industrial_and_Scientific_5 POS 5.0 SOOO Much cheaper than buying from an action-figure repair place.
1474 Industrial_and_Scientific_5 POS 4.0 Good product.
2942 Industrial_and_Scientific_5 POS 5.0 Great product! This is something that quality is a must and it was provided. Will buy again! Right price, fast service!
5737 Industrial_and_Scientific_5 POS 5.0 worked great
Recommended
7063 Industrial_and_Scientific_5 POS 5.0 Got this for brewing. It does a great job, doesn't kink easily and of course is flexible, I just wish silicone tubing in general wasn't so damn expensive!
7965 Industrial_and_Scientific_5 POS 5.0 This was a shot in the dark purchase. I was looking for a lightweight rod, and this is a little heavier than I expected, being aluminum. It weighs about 5 pounds, I was expecting around two or three pounds.
9393 Industrial_and_Scientific_5 POS 5.0 I needed a live tailstock large enough for heavy tubular stock(1.5" ID) to be turned with. This does the job nicely. So far it has run smooth and quiet.
2723 Industrial_and_Scientific_5 POS 5.0 My desktop computer's CPU has been running pretty hot for a long time. I finally took it apart and blew the dust out of the CPU cooler which helped improve the cooling efficiency, but then I took it apart again and put some of this goo on the heatsink and now it runs MUCH cooler and the fans run slower so the machine is nice and quiet.
8669 Industrial_and_Scientific_5 POS 5.0 This is super sticky stuff! I've got it under two small rugs that are in key entry points in my house. So far, they've stayed in place just fine - even with my neighbors dog running around now and then.
9312 Industrial_and_Scientific_5 POS 5.0 Excellent Product, I Recommended to Anyone, I use it in my shop, and the are the best...
2650 Industrial_and_Scientific_5 POS 5.0 best thermal paste I have used
8052 Industrial_and_Scientific_5 POS 5.0 I needed a "thick walled" piece of tubing to replace two leg rest bars on an exercise weight lifting machine. It needed tubing to be 3/4" OD but thick walled, as the OEM pieces that "bent" were 3/4" OD but thin / standard wall thickness. I looked at local big box hardware stores, but could not find any type of tubing or pipe that was 3/4" OD that was thick wall. Standard threaded pipe would have worked as I could have cut out the non threaded portion length I needed, but the OD on standard stocked sized galvanized or black pipe (which are thick wall) were either too large or too small. Steel conduit (for electrical wiring) was thin wall, as was metal tubing sold in another area of stores. I found what I needed on various metal supplier websites, but with shipping the total cost was pretty high. I ordered this : 3/4" OD, 0.53" ID, 0.109" Wall, 60" Length - and it appears to be exactly what I needed. Good buy for $20 including free shipping. It came within two days, and was very well packaged in a thick protective cardboard tube, with good plastic pieces inserted into ends so heavy metal tubing would not fall out - I have not yet cut this down to length, but am happy with product, price, and shipping.
7022 Industrial_and_Scientific_5 POS 5.0 There isn't really much to say about a square of copper, is there? Very smooth, very flat, shipped in a nice poly bag inside a box. My wife uses these for some of her jewelry making projects and loves 'em.
(Pump super hot and no longer humming)
9320 Industrial_and_Scientific_5 POS 5.0 Can't go wrong with this one . The headaches of finding one of these things can be a problem at times. Use just a couple of this set and it has more than paid for itself in headaches !
5709 Industrial_and_Scientific_5 POS 5.0 This holds circuit boards in place well while I solder or desolder components in place. Given that it uses a vaccuum seal to hold in place, I'd be loathe to reccomend it for large projects, but it's absolutely awesome for electronics.
4362 Industrial_and_Scientific_5 POS 5.0 The item suits the application for which I purchased it. I am happy with the item and I would order another if I had the need.
816 Industrial_and_Scientific_5 POS 5.0 Very nice kit. Good quality
The functions are still there.
Rod came packaged in a nice plastic tube to protect the threads from damage.
3268 Industrial_and_Scientific_5 NEG 1.0 I bought the O'Berry 3233 Squeeeek No More Floor Kit to use with these screws. I used as directed and had NO positive results. I did locate the joists properly and I know I positively hit each one. I must have used at least 125 screws in a 5' x 6' area with all the squeeks remaining.
8983 Industrial_and_Scientific_5 POS 5.0 First of all, kudos to Tool King (TK) for the way they shipped these nails to me; the nails were shipped in bubble mailers, which is normal, but what TK gets credit for here, is that they wrapped each pack of nails in packing tape so even if the package was ruptured somehow the nails wouldn't go everywhere. So thanks for that guys.
8845 Industrial_and_Scientific_5 POS 5.0 I modified my XBOX 360 and installed a see through panel in it. This Polycarbonate Sheet was easy to cut and fit. Fast shipping.
3808 Industrial_and_Scientific_5 POS 5.0 Works great and cures fast! Used this for upgrading the heated bed in my DaVinci 1.0 3D printer by JB-welding it to the pre-existing adjustable platform. =)
4940 Industrial_and_Scientific_5 POS 5.0 good quality
1228 Industrial_and_Scientific_5 POS 5.0 works fine
5921 Industrial_and_Scientific_5 POS 5.0 I use these for little projects around the house. Good price for a box full.
Our only complaint is that on occasion the door seems to "get stuck" in the closed position, but we just hold in the button latch for a few seconds and it pops open--not a major concern for us.
2927 Industrial_and_Scientific_5 POS 5.0 Great for testing/troubleshooting automotive gauges, such as coolant temperature gauges, oil pressure gauges, and the like.
3760 Industrial_and_Scientific_5 NEG 1.0 I bought this hose for our camper. We went camping this pass week and our neighbors our camping had the same problem. They said when they get home they are going to get rid of their too. Once you TRY to roll it up it has kinks in it and won't roll. So three of us will not be using this type of hose, the other people through theirs in the garbage. The hose is strong but the end was bent on ours in the first place. Thank God we had another hose to use.
3517 Industrial_and_Scientific_5 POS 5.0 My wife bought this to replace the one she had since graduate school 35 years ago. She was astonished at how well it worked and how inexpensive it was. About one-tenth the price of some brands.
7864 Industrial_and_Scientific_5 POS 5.0 High-quality material highly recommend.
Around most of it:
2748 Industrial_and_Scientific_5 POS 5.0 Great Thanks
53 Industrial_and_Scientific_5 POS 5.0 I have to say Gorilla Glue, has worked on everything
The other ones I tried (cheaper) that were NOT from this company were absolutely horrible, and then I had to pay a restocking fee to return them, as well as shipping.
2184 Industrial_and_Scientific_5 POS 5.0 Not sure if I'd want my doc operating on me with these, but for hobby or home applications they work fine.
5651 Industrial_and_Scientific_5 POS 5.0 Well made.
6389 Industrial_and_Scientific_5 POS 5.0 As advertised
5512 Industrial_and_Scientific_5 POS 5.0 Work like they should. Will buy again when needed.
4658 Industrial_and_Scientific_5 POS 5.0 Good quality
3886 Industrial_and_Scientific_5 POS 5.0 It's JB Weld, what else is there to say?
2821 Industrial_and_Scientific_5 POS 4.0 It's been awhile since hooking up a computer. The last time I had to use thermal compound that wasn't pre-applied is close to 7 years. Back then I was told to put it on and spread it out with a pieces of plastic. Well this method is quite messy and really wrong! The best way to apply thermal compound is to apply a little dollop in the center and let the heat sink spread it out. Anyway, I used way more than is necessary.
I try to find multiple uses for anything I buy so I want to mention another beauty use for these that I have discovered when using them to hold creams on my feet. These are wonderful for applying and sealing in moisture overnight for the ankles (and, yes, feet!). I realized this when using only a moisturizer (and not the RX creams). When I removed the bandage and tape in the morning, the areas of my skin not affected by eczema felt wonderfully soft. I used to always just use socks over my moisturized feet, but this is going to be a nice trick for softening dry heels this winter.
6181 Industrial_and_Scientific_5 POS 5.0 I have purchased just about all sizes and types of American Terminal connectors and they are all of good quality and crimp well without destroying the boot, as some lesser quality connectors do. I have a habit of keeping an eye on the seam of the barrel, as the crimper's point needs to crimp the opposite side.... they are all aligned on the same side as they should be. The barrel takes a beautiful, tight crimp.
5935 Industrial_and_Scientific_5 POS 5.0 This stuff is amazingly strong and abrasion resistant. It is indistinguishable from their Shoo Goo product, which I have been using for over 35 years. You can bond just about any two things together and make a permanent fix. Moisture resistant also.
Use them again and again.
6345 Industrial_and_Scientific_5 POS 5.0 It can handle fast movements without error. That is important to me because I use it so much that I am pretty quick with it. It is not calibrated and traceable via a certified lab but for quick work it is great and holds up to the the traceable calibrated ones at the shop.
116 Industrial_and_Scientific_5 POS 5.0 fit as advertised and work well too...
4910 Industrial_and_Scientific_5 POS 5.0 Great Product.
6537 Industrial_and_Scientific_5 POS 5.0 After having read some product reviews while waiting for the unit to arrive, I was a little nervous that I might have problems. Nothing could be further from the truth. The installed batter worked fine, I zeroed the unit once and used it to model an object for about four hours. Every time I picked it up, the measurements were consistent and it never required zeroing again. Well worth the money as far as I'm concerned.
2556 Industrial_and_Scientific_5 POS 5.0 I love this stuff. Have been using it for years for random repairs around the house. Things have held up in some cases for years! Once opened, I like to take the black and red plastic caps that are under the spreader, and keep them in after squeezing all the air out to help keep any oxidation to a minimum. I've used it for plastics, metal to plastic, car parts, vacuum parts, holding up undermount sinks, countless repairs that have saved me tons of money.
970 Industrial_and_Scientific_5 POS 5.0 Excellent-highly recommend seller A+
1691 Industrial_and_Scientific_5 POS 5.0 These work just great even on gravel. A bit of an odor, but they are in the tool shed. I would buy again if needed
963 Industrial_and_Scientific_5 POS 5.0 Great for medium agressive clean up. It can do some decent scrubbing of caked on dirt or things like that. Don't expect it to be clean like you sanded our powerwashed it though.
3D AC Magnetic and AC Electric Field reading, a time saver for professionals
8782 Industrial_and_Scientific_5 POS 4.0 Needed it for my first aid kit. It beats have to worry about a suture kit and is easy to use.
5969 Industrial_and_Scientific_5 POS 5.0 exactly what was needed
6469 Industrial_and_Scientific_5 POS 5.0 Just as accurate and well built as Mitutoyo measurement devices I've used in the past. I can't justify their price.
7816 Industrial_and_Scientific_5 POS 5.0 Nice material, arrived as described and packaged in a sturdy cardboard tube, protected from the elements and accidental damage.
8196 Industrial_and_Scientific_5 POS 5.0 Delivered as advertised
2615 Industrial_and_Scientific_5 POS 5.0 Excellent quality - Excellent service - I recommend this product.
9504 Industrial_and_Scientific_5 POS 4.0 I needed to re-organize the peg board above my workbench mostly because the variety of tools I needed their have changed. There are more than enough varieties of hooks to choose from and still had plenty left over. i would have given 5 star but they ae just a little loose for 1/4" holes, but a little electrical tape did the trick and found that careful lifting off of tools helped.
8463 Industrial_and_Scientific_5 POS 5.0 I was a little intimidated when I ordered this that it might be a little difficult to install. It wasn't. In fact it was rather simple. Just install the magnetic strip along the back of the sink. The problem here was getting all the "stuff" out from under the sink. But that may not be a problem for you. Then the hook "attaches" easily to the sink because the magnet is just on the other side.
9376 Industrial_and_Scientific_5 POS 5.0 Solid well-built live Center. I bought it for you so my wood lathe and it does the job.
6656 Industrial_and_Scientific_5 POS 5.0 Littmann scopes are basically the only ones you'll see in the hospital and are very well known. I just wanted to add my 2 cents to the discussion.
1792 Industrial_and_Scientific_5 POS 4.0 SImple and Nice
3651 Industrial_and_Scientific_5 POS 4.0 This is my third Camco hose. They last about two years +/-. I have had much, much worse. These are fairly easy to drain and coil.
2479 Industrial_and_Scientific_5 POS 5.0 I can always tell a worthwhile tool because it quickly disappears from my shop. This jack does the job and for the price I'm not too worried about durability. I just bought a second one to replace the one my crew swiped. For something to use every day I would buy a nice USA made jack, but this is perfect for the truck or to send out with the crew.
For the second measurement I took a trustworthy (+/- a couple of degrees over the range) kitchen thermometer, which correctly read 32F in ice water. I put them both in warm water. The trustworthy thermometer read 118, and this one read about 110.
880 Industrial_and_Scientific_5 POS 5.0 amazingly strong. Allows you to move any furniture with ease
9332 Industrial_and_Scientific_5 POS 5.0 Great collection of locking nuts, for a very good price. It's nice to have a collection for the occasional need for a locking nut. My only complaint is the box it comes in - the latch will not keep the box closed (it's the design, not this individual one) but I didn't subtract any stars because I put these into a larger parts cabinet so I don't need the container.
1264 Industrial_and_Scientific_5 POS 5.0 I just received my 3rdhand contractor pack that I had ordered on 05/17/04. It arrived on 07/17/04.after I cancelled my order through Amazon.com and reordered directly from TOOL CRIB using there 800-635-5140 number it only took 4 days to receive the order. I suggest that if you want a tool from Amazon.com, you order it direct from Tool Crib.
Pros:
9011 Industrial_and_Scientific_5 POS 5.0 Worked great in my Central Pneumatic from Harbor Freight. Nailed quarter round and molding without a miss!
Plus, unless you`ve memorized the menu structure, one tends to go a step too far.
4235 Industrial_and_Scientific_5 POS 5.0 Very good quality. Works well. As advertised. This is the original.
Goop is one of those "miracle" products with a thousands uses, which needs to be a permanent part of any household. Other such items include silicon grease Permatex 22058 Dielectric Tune-up Grease - 3 oz. painter's tape ScotchBlue Painter's Tape 2090-1E2, 1 Inch by 60 Yards, 1 Roll, and WD-40. WD-40 Spray Lubricant - 16-oz.
2342 Industrial_and_Scientific_5 POS 5.0 I bought a can of this dry film case lube mostly as an experiment, and am very happy that I did. It's so easy to put a thin film of lube over the case, and it doesn't leave the cases all slimy and sticky. Action in my resizing die is smooth, and the shells don't show signs of excess strain or friction. I should have thought about using dry film a long time ago, but that's why Hornady is a name hunters and sport shooters have come to rely on. Buy this! You won't regret it!
3670 Industrial_and_Scientific_5 POS 5.0 Perfect! Performs as advertised!
The bright red color is great when you need to find the jack in a pile of stuff in the trunk of your car!
2578 Industrial_and_Scientific_5 POS 5.0 I have an adobe style birdbath that wasn't cheap, and a huge desert monsoon wind tipped it over. I was so disappointed because the birds really liked using it. So I picked it all up and saved the pieces til I decided what to do. I saw this product while searching for crazy glue and thought I would try. YES it did the job! I am talking a 12" on 2 sides and 4 inches across the top piece plus a couple smaller shards that took almost 1/3 of the bird bath out - no small crack. Easy to use, no horrible smell, dried fast enough and it is keeping the water in the bird bath. It isn't peeling off yet and it's been a couple weeks.
6639 Industrial_and_Scientific_5 POS 5.0 Bought this to replace my stolen one (get a job and buy your own stuff people). This one works well and is a pretty color. Hopefully I won't be needing anymore of these but if I do, this will be my 1st choice.
It holds 100g of silica gel
(5) 2012 LED Television
233 Industrial_and_Scientific_5 POS 5.0 Bought the two pack for my Craftsman XSP 12 Gallon 5.5 Peak HP Wet/Dry Vac Model 12006. I'm using the standard white/red stripe filter.
2459 Industrial_and_Scientific_5 POS 5.0 For the carpentry application I am using it for, it is great. It is heavy, it takes a lot of pumping, but it gets a floor to move in half a heart beat. I would definitely purchase again.
6689 Industrial_and_Scientific_5 POS 5.0 Best stethoscope I've used
the slippers can actually be 'worn out' instead of throwing them away because the upper and sole have separated.
3687 Industrial_and_Scientific_5 POS 4.0 works great, no leaks for 6 rain-barrel system
1203 Industrial_and_Scientific_5 POS 5.0 I bought this to seal off my car's trunk speakers to the hood (6x9")!
4720 Industrial_and_Scientific_5 POS 5.0 So far I've only used this to patch a crack in the ABS end-caps of my Jeep's radiator.
2786 Industrial_and_Scientific_5 POS 5.0 works great
3906 Industrial_and_Scientific_5 POS 5.0 Ive been using JB Weld for a very long time. I can tell you that this will fix just about anything. I even fixed a cracked plastic resin tub with it and a Fiberglass tub and it held. Then painted it with white porcelain paint. Ive fixed auto parts, desks and power toools. Ive made bolts and pins with a reverse mold (form). This product is great for the things I cant get too or things I cant use my Mig Welder on. I like the original set JB weld with steel reinforced because it has the highest strength rating out of all the JB weld products. Ive used JB Quick and it worked ok too for the application I used it on..
8585 Industrial_and_Scientific_5 POS 4.0 Very satisfactory
6269 Industrial_and_Scientific_5 POS 4.0 This tester do not have audible signal, one star off. However, it feels good on your hands, very usable that don't need to press any on off sw.
9253 Industrial_and_Scientific_5 POS 4.0 This is a decent set. I wish the smaller set screws came in different sizes but it is what it is. They work and that's good. Just wish again, that there were less screws of any one size, and more sizes instead. 4 stars as a result.
8577 Industrial_and_Scientific_5 POS 5.0 THIS Golilla tape is top line. Have been using it sporadically for a couple of months and it holds (grips) better then any taper I have ever used and I've used a lot over the past 50 plus years.
4633 Industrial_and_Scientific_5 POS 5.0 Super fast shipping! Exactly as described!
8461 Industrial_and_Scientific_5 POS 5.0 I had wrapped our stainless sink which already had a sound dampening coating on it, with a couple of layers of Dyna-Mat. Dyna-mat is a car audio product designed to absorb vibrations and is commonly adhered to car doors, floors and the likes of which you would like to minimize rattles and noise. The double layer I had applied probably added 3/16" of thickness to the coating that was there. FYI - I really like the Dyna-mat on the outside of the sink as it really reduces the thin and hollow sound of a stainless sink. It makes it a dull thud when you bump dishes and pans into it now. It is so much better. Here's what I bough on Amazon if anyone is interested: Dynamat 10425 18" x 32" x 0.067" Thick Self-Adhesive Sound Deadener with Xtreme Wedge Pack I purchased 2 and cut them in half lengthwise. Be careful of the sharp foil edges.
(14) Dishwasher
4871 Industrial_and_Scientific_5 POS 5.0 This fitting is exactly what it says to be. I do not have too much to say other than it worked as I needed it to. Make sure you use Teflon tape or pipe dope on the threads to ensure a perfect seal.
So why only four stars? The buttons on the device are the cheap rubber buttons that can get wedged and stuck if you push them at an angle. Not a big deal, and easy to fix, but still annoying. Other than that, no complaints.
6055 Industrial_and_Scientific_5 POS 5.0 Used this for an autocsiphon. Durable, flexible and easy to clean/sanitize
And I lied about it staying crunchy in milk...
7774 Industrial_and_Scientific_5 POS 5.0 Outstanding rod, well made with fantastic ultra heavy duty cardboard tube shipping.
5844 Industrial_and_Scientific_5 POS 5.0 Great product.
8058 Industrial_and_Scientific_5 POS 5.0 The price of purchasing small pieces of tubing must be balanced with the cost of locating a supplier who will cut and travel time.
5277 Industrial_and_Scientific_5 POS 5.0 I've used Shoe GOO to repair cracks in rubber soles and to affix leather that had separated. I've also used it to put entire new soles on shoes. It works better than any other adhesive I've tried on shoes, plus it peals easily off the fingers.
5760 Industrial_and_Scientific_5 POS 5.0 So much better than the cheap stuff you see in most stores these days.
None
7321 Industrial_and_Scientific_5 POS 5.0 Stuff works great! Its durable and drys quickly.
DC ductwork is 4" OD.
8788 Industrial_and_Scientific_5 POS 4.0 Fortunately, I haven't had the need to use these yet, but tey did arrive promptly and in the condition as advertised. I know they work fine, becaused my veterinarian uses them on his patients. They seem sturdey and up to the job it is intended for.
6005 Industrial_and_Scientific_5 POS 5.0 Muy buen Producto
7237 Industrial_and_Scientific_5 POS 5.0 Leak free.
488 Industrial_and_Scientific_5 POS 5.0 My favorite disposable shop towels and I have tried many
7394 Industrial_and_Scientific_5 POS 5.0 This stuff is fantastic sued in places were its to small for shrink tube.
3909 Industrial_and_Scientific_5 POS 5.0 DOES THE JOB
5793 Industrial_and_Scientific_5 POS 5.0 Be good for multipurpose use.
2619 Industrial_and_Scientific_5 POS 5.0 This is the defacto standard for thread cutting on a lathe. I use it to set my tool and to check my TPI. Well made, has stood the test of time.
9859 Industrial_and_Scientific_5 POS 5.0 Hard to fine in the store with only these in the package. They work very well for 1/2" flat ground strap.
9615 Industrial_and_Scientific_5 POS 5.0 product as advertised and priced great. would recommend to anyone wanting or needing this. great buy.
1953 Industrial_and_Scientific_5 POS 5.0 I would give this a 5 Star but the roll arrived wrinkled all throughout the tape. It appeared to have been in extreme heat for some time. However, it is tough and sticky. This is what I needed for Houston's high humidity and wet winters. (we wrap our pipes for winter) it is also 100 times better than the "duct" tape which I consider a cheap imitation. If you want tape that will last, this is what you want.
6316 Industrial_and_Scientific_5 POS 5.0 This is just right for measuring the OD and ID for my projects.
As expected, which is not always the case the the risky world of mail-order, it is rectangular tube is 2" x 1" OUTSIDE diameter, of 1/16"-thick steel. I ordered the 12 incher, and it is actually 12 1/4" long.
Keep in mind that I'm a total noob when it comes to any of this. I've never drilled a hole in anything in my life, much less in stainless steel. My method was as such:
Adding it to my car's fuel tank gives me 137 MPG.
I have been using this product for sometime now and still have a good amount left, this is the quickest and cheapest way to accurately test your pH.
7523 Industrial_and_Scientific_5 POS 4.0 Worked well.
135 Industrial_and_Scientific_5 POS 5.0 These trash cans are really tough. They are industrial strength. This one will fit two tall kitchen trash bags if they aren't really stuffed. I only wish the lid came attached to the can. But then it would eventually break off like my lesser quality can. I recommend!
8705 Industrial_and_Scientific_5 POS 5.0 Very nice
5820 Industrial_and_Scientific_5 POS 5.0 works good.
2370 Industrial_and_Scientific_5 POS 5.0 Excellent
4139 Industrial_and_Scientific_5 POS 5.0 ok
1280 Industrial_and_Scientific_5 POS 4.0 A good medium duty carpet cleaner with some issues, but none that can't be inexpensively overcome. I have a lot of carpet in my home, front porch enclosed, back porch enclosed, living room, combined dining room, huge master bedroom, long hallways, the laundry and utility room part of the basement, and the upstairs laundry room. Over the years I've removed carpet from two bedrooms, the basement rec room area, the front bathroom, and the kitchen, so there used to be even more. My choice for cleaner was a full size Rug Doctor (RD), the "ones you rent". That said this Hoover cannot outperform the rug doctor. It is a decent performer however when I don't want to break out the very large and cumbersome RD.
We've found it works great for filling in hols in plastic lids, among other things.
2959 Industrial_and_Scientific_5 POS 5.0 I purchased 2 packs and I'm quite happy with these. I didn't measure the wire size but they are larger and heaver than a set I bought several years ago from another site.
870 Industrial_and_Scientific_5 POS 4.0 did the job for me
7302 Industrial_and_Scientific_5 POS 5.0 I have tried other brands of liquid electrical tape in the past and have not been happy with them. The Gardner Bender liquid tape actually works and so far it has not dried out inside the bottle even when sitting in my tool box for weeks on end at 80 and 90 degree outdoor temperatures.
4519 Industrial_and_Scientific_5 POS 4.0 It is not bad for a drill press vise. but just that. Not a watchmaker precision vise :).
Works well and looks good with the copper pipes.
4841 Industrial_and_Scientific_5 POS 5.0 EXCELLENT TAPE GLAD I PURCHASD IT AND THANKS AMAZON
798 Industrial_and_Scientific_5 POS 4.0 works pretty good doe's the job
A far better bottle design is instead oval in shape like this one: Professional Grade Cyanoacrylate (CA) "Super Glue" by Glue Masters - Thick Viscosity Adhesive for Plastic, Wood & DIY Crafts
2289 Industrial_and_Scientific_5 POS 4.0 "Gorilla Glue" has become one of the most used "tools" in our house. We have used it to repair wooden chairs, fix a wooden medicine chest, glue soles back on to sneekers, fill cracks in a wall, and at least half a dozen other fixes in the past month.
5902 Industrial_and_Scientific_5 POS 5.0 I don't think there is a perfect type of duct tape out there that will do every kind of task for which duct tape was designed for. Gorilla tape is for jobs that require a thicker duct tape; about twice as thick as the regular kind, and for those jobs that require the tape to have very little stretch. This tape is great for outdoor applications, where the tape will be exposed to the elements.
CA Dept. of Health Services - CA EMF Program
6254 Industrial_and_Scientific_5 POS 4.0 A reliable name in electronic testing equipment and a good product from them.
495 Industrial_and_Scientific_5 POS 5.0 Fits in my garage cabinet perfectly and is uber handy. Good quality rag alternative.
WARNING! WEAR FULL PROTECTIVE CLOTHING.
5474 Industrial_and_Scientific_5 POS 5.0 aaa+++
934 Industrial_and_Scientific_5 POS 5.0 I used it to clean around lettering's of a bronze headstone marker. At first, I was so careful and slow, but it was gentle enough not to scrape the bronze out but strong enough to remove all the hard water-spots and dirt.
Wires are thin leads and have a reduce tendency to bind up. Would not recommend these for current readings.
4347 Industrial_and_Scientific_5 NEG 1.0 Bought a Kenmore microwave in 2003 that served us well until the rotary motor stopped working. Saw good reviews on this one and it was just the right size so we ordered it from Amazon (Great price and super fast free delivery). So far, this thing has performed fabulously. It runs quietly (even the beeper isn't too loud), has great power and power distribution, and the door opener has, so far, operated smoothly and with ease (although we are holding our breath on this item in view of all the negative feedback we see on the door opener).
No one likes call backs, from the Contractor to the client. They cost money and time. Most of my painters use professional caulks that you will not find at big box stores, and for a reason. Most of the DIY caulks will shrink over time. I had some crown molding on a project we did a couple of years ago, develop cracks between the ceiling and crown. It took a full year for that to develop, but it was in a home that had insulating, heating/cooling and humidity issues. Later I found out that the caulk used was not a pro brand. It really looked bad seeing all those cracks and pulling away caulking in an otherwise highly detailed and otherwise flawless job. The old caulk had to be removed and new caulk and paint applied. I paid for that trim finishing three times. The first time, the second to remove, and the third to fix. Needless to say we went back with big stretch. *** It may be a little more expensive up front, but it may be much less expensive given time and circumstance.....***
7315 Industrial_and_Scientific_5 POS 5.0 Great stuff, many uses around the shop and outside.
We'll see how it stands up. I figure if it saves us even 5% on the utility bills we saw last year it will be well worth it.
9705 Industrial_and_Scientific_5 POS 5.0 Great deal on a lot of super glue.
------------------------
Anyways, this is a great product, I highly reccomend it.
Wrapping a cylinder is not an issue. This tape does an excellent job with cylindrical-shaped objects.
3494 Industrial_and_Scientific_5 POS 5.0 They are good quality and the right size to carry in my uniform pocket. Comfortable to use and sharp enough to cut bandage material.
6194 Industrial_and_Scientific_5 NEG 1.0 Hello fellow Amazonians:
1805 Industrial_and_Scientific_5 POS 4.0 Great glue.
8051 Industrial_and_Scientific_5 POS 5.0 Just what I needed.
9021 Industrial_and_Scientific_5 POS 5.0 great brads
9417 Industrial_and_Scientific_5 POS 5.0 Good Deal!!
3141 Industrial_and_Scientific_5 POS 4.0 nice. sticky, hasn't gone in the water yet...
7814 Industrial_and_Scientific_5 POS 5.0 Stout but still bendable, it worked perfectly for my use which was to build a VHF antenna (ham radio).
Space/shape: The shape is more 'square' than 'rectangle' which allows things like a large pizza box to rotate inside, rather than getting hung up. It probably has the most usable space inside, compared to its size outside, of any microwave I have seen
This tape is TOTALLY worth the money - if you are using it on something that you WANT it to stay onto. If you have a temporary project or a project that doesn't need 'super tape', then even I would use a lesser tape. But, when it comes to making sure that whatever I'm working on (like sealing up a framed picture back) then I use Gorilla Tape - not as big of a fan of their glues (I prefer Loctite products) - but the tape, sure is worth the money!
2899 Industrial_and_Scientific_5 POS 4.0 Your basic low voltage multi-color alligator-clip jumper wire set for troubleshooting low voltage items.
It comes fully put together and ready to use. If you want to use it only for garbage bins, that works as well.
1915 Industrial_and_Scientific_5 POS 5.0 wasnt as transparent as planed still worked but ended up changing out after a while
3" 3mG
I have always stored in the basement clean dry and in a box.
5502 Industrial_and_Scientific_5 POS 5.0 Well made connector. Holds good on connector. Had originally ordered install bay brand but had to return because of loose fit.
7056 Industrial_and_Scientific_5 POS 5.0 Excellent quality. Exactly as described. I wish it was slightly thicker walled, but the measurements are as described.
9876 Industrial_and_Scientific_5 POS 5.0 Powerful magnets.
1467 Industrial_and_Scientific_5 POS 5.0 Every time I use this set I congratulate myself for buying it. Instead of those piddly tubes you get at the hardware store, the ones whose caps get encrusted and whose tips jam up, I have a big selection in tubes having enough capacity for big jobs, and whose caps always work and whose tips never clog. Plus, the range of viscosities assures that I have the right type for whatever I'm doing. The only caveat I'd make is that these adhesives have a limited shelf life (2 years I think) and unless you're a heavy user, there's so much that you might end up throwing some out. I keep mine in the refrigerator to maximize its shelf life, but even if I don't get thru it all, I'll happily toss it and get another, because having it on hand is worth it to me. And it really isn't that expensive compared to the quantities you get in the piddly tubes.
8731 Industrial_and_Scientific_5 POS 4.0 self threading will not split wood even without predrilling even close to the edge of the board.
Silicone Sealant is the best sealant available for most applications. It is far more resistant to drying out and cracking than latex based sealants, is more waterproof, and is more permanent. I personally like it because it doesn't seem to attract dust and dirt as much as latex sealants. When you absolutely need a waterproof seal (boats, engine cooling systems, etc.) you use silicone.
1184 Industrial_and_Scientific_5 POS 4.0 On time and as advertised
Make sure you vacuum the carpets and rugs you wish to clean before hand. This cuts down on the hair and fiber that you will have to clean out of the brushes and the dirty water tank. To begin, depress the trigger in the handle while walking slowly forward. This releases hot cleaning solution onto the carpet. Now release the trigger and walk slowly backward. The machine will then suck up the dirty water from the carpet. You can clearly see the dirty water being vacuumed up on the top of the dirty water tank. I then walk back and forth over the same area again to make sure I suck up as much fluid as possible, which speeds drying time. Move over and repeat, slightly overlapping the area you just cleaned, until the entire carpet/rug is clean.
would buy again... but maybe not found about same price local.
As long as you know that, the tool does exactly what it is meant to do.
2371 Industrial_and_Scientific_5 POS 4.0 Works good for it's size
6526 Industrial_and_Scientific_5 POS 5.0 GOOD CALIPER
1988 Industrial_and_Scientific_5 POS 4.0 Good tool for the price. As a handyman, I don't need a splitter very often. The cost allows me to have a specialty tool in the box for the occasional use.
The old belt had rotted in at least three parts, which could attribute to the excessive noise. I can't remember if it was that loud when I first got the belt sander, but the only way to really find out is to either buy a new belt sander, fresh from the box, or get a standard non-grooved V-belt and try it out. I'll leave that test for someone who wants the challenge. As far as I can say, this belt may be a little more quieter than the old belt, but again, that may have been do to the cracks in the old belt, or the stiffness from heat cycles over the years. Nonetheless, the sound is not as SMOOTH as a standard V-belt. The grooves definitely give it a different sound profile, like off-road tires on the freeway sort of thing. The end result should not sound quality, although sound quality affects the overall work environment/atmosphere, but the real important factor is longevity. It seems like a solidly built belt, and I hope it lasts as long as it looks.
- It returns to zero accurately every time - at least mine does consistently.
Unfortunately I could not find the all red kit on Amazon at this time.
423 Industrial_and_Scientific_5 POS 5.0 I don't install grommets everyday, so justifying spending hundreds of dollars on a production press just wasn't in the budget. For those of us with smaller projects to do, this kit was perfect! It has everything you need to get the job done. The anvil portion, arguably the most important part of the kit, is very well made. I'd give it 5 stars. The wood block is just a piece of oak. The cutter works okay, I'd give it 4 stars. The grommets I'd say are not the best, so I'd probably give them 3 stars. But again, the most important part is the anvil and this kit delivers a top notch anvil that will pound hundreds and hundreds of grommets. I was using the cutter on some nylon webbing, so it didn't cut the best. I suspect it works far better on leather or cotton. Regardless, it did work, it just wasn't awesome. The grommets are pretty light weight. I've definitely used heavier grommets before. That said, they were free and come with the kit and they work fine and seem to hold tight. How they'll stand up over time I'm not sure, but I'll just have to see. So if you want super nice top notch grommets, you'll probably have to buy those separately. Overall I give this kit 5 stars because it delivers an excellent anvil and it's very affordable.
5115 Industrial_and_Scientific_5 POS 5.0 Holding up quite well.
1652 Industrial_and_Scientific_5 POS 5.0 OK as advertised
8658 Industrial_and_Scientific_5 POS 5.0 As advertised.
When using the product a little dab will do the trick. If you use too much it will squeeze out from under the heat sink and make a big mess. The proper amount is about 1 to 2 times the size of a grain of rice. If you look on the internet there are several guides on how to use the product including photos. Sometimes on a large CPU I spread the compound in a very thin and even layer with and old credit card like tool. On one rough heat sink assembly I had to work a drop of the compound into the surface with a credit card and this filled in the micro abrasions in the surface and improved the temperature drop by 4 degrees C. The key is that you want a thin and even layer of the compound on the entire top surface of the CPU so that all the micro flaws in the surfaces of the CPU and the heat sink are filled with the silver in the product to provide maximum thermal conductance of heat away from the CPU and into the heat sink assembly. Do not use to much compound, people tend to use too much or not enough and the science is to do it just right!
ME3951A Professional Electromagnetic Field Meter Low Frequencies Gauss Meter
6145 Industrial_and_Scientific_5 POS 5.0 Great product and great price!!
Fluke makes good products, but you pay more for the name than you do the quality. Power probe make some piercing probes that work great and do the same thing as these for less $$ And if you are auto tech like me, you are probably looking for quality stuff at bargain prices. That's why you are on Amazon looking at tools.
6966 Industrial_and_Scientific_5 POS 5.0 used it for a one man brake bleeding setup (just some tube and an old bottle) and this fit the bill perfectly. probably way too thick for what i needed but hey it was cheap and i know it will be durable as brake fluid is super corrosive. the only downside i have to say is that when the bottle was empty the tube was so heavy it was causing it to fall over but once it filled up a little bit there were no problems, however i cant really take off stars for heavy duty tube being too heavy for an empty bottle.
441 Industrial_and_Scientific_5 POS 4.0 Reviewed directions for use in the reviews and questions, but used for a thin shade material and the outside of the grommet cut the material. The cutter worked well for it's purpose, and only needed it for light duty. Sure it would be okay for medium duty applications, and thicker material.
8221 Industrial_and_Scientific_5 POS 5.0 Great source for buying uncommon diameters and lengths. Great idea for an online business and a convenience for the public.
4011 Industrial_and_Scientific_5 NEG 1.0 This epoxy leaked out of the bottom after first opening, ran out over the top of a cabinet and ruined it. Needs to be stored with the tip down, but you will only learn that the hard way. Lousy packaging of OK glue.
4133 Industrial_and_Scientific_5 POS 4.0 I have three of these tables and am about to purchase a fourth.
6584 Industrial_and_Scientific_5 POS 5.0 Great Product
The switches are a little hard to read so i painted the ON section with a silver sharpie.
APPLICATOR TIP
6002 Industrial_and_Scientific_5 POS 5.0 super light weight. have it in a jump bag as a back up.
553 Industrial_and_Scientific_5 POS 5.0 This tool performs as advertised. I used it to ream out a steel gate hinge cylinder and enlarge a lock strike. It did the jobs quickly and showed no signs of wear.
3445 Industrial_and_Scientific_5 POS 5.0 Item was as described and functions well - mounted on my Kubota tractor
9217 Industrial_and_Scientific_5 POS 5.0 always vermont good
4389 Industrial_and_Scientific_5 POS 5.0 Fits my mop nicely. Quality fabric.
8001 Industrial_and_Scientific_5 POS 5.0 Perfect
3327 Industrial_and_Scientific_5 NEG 1.0 I initiated a return immediately after getting it. It leaked oil and would not pump. Terrible paint job all over and the relief valve was painted into position. Obviously poor quality. Thank God for Amazon returns. It is all packed up and will mail it back tomorrow. Looked for a higher quality bottle jack by reading the reviews on the site, seems they are all badly made. So ordered a Craftsman, and will see. Why isn't there a quality bottle jack at a reasonable price?
to the slender tips which are less likely to accidentally touch
7894 Industrial_and_Scientific_5 POS 5.0 This is exactly what I needed and the item was shipped quickly and packed very well. I would definitely recommend it.
2638 Industrial_and_Scientific_5 POS 5.0 as a musician this cart is worth it's weight in gold ! just what I needed to haul PA speakers and monitors to the stage fro the parking lot !
3990 Industrial_and_Scientific_5 POS 5.0 I have used this glue for many different surfaces and it works very well. It stick to pvc plastic well if you scuff the surface before applying.
7606 Industrial_and_Scientific_5 POS 5.0 very handy and easy to use compared to ropes for securing our canoe on our roof rack. Love the lengths are embroidered right into the strap. Worth the cost.
58 Industrial_and_Scientific_5 POS 5.0 8oz Original Gorilla Glue. This is a good strong glue. I use the full line of Gorilla products. I can always count on the quality of their products.
4610 Industrial_and_Scientific_5 POS 5.0 works great
I have no idea why the window installers don't do this when the first put the windows in. There were seriously only 2 beads of calking holding my windows in place on each side of the window. No wonder it was leaky and felt cold! I just had them installed about 6 years ago too, so not that old. If you feel a draft near a window, I would think about having a DIY weekend.
Very durable. I got frustrated with my project and drilled out much more then I should have using this rather then a carbon steel still bit, but this took it like a champ.
9735 Industrial_and_Scientific_5 POS 5.0 It's super.
Gorilla glue, is easily wiped off with warm cloth, or glued piece filed for cleaner look.
5745 Industrial_and_Scientific_5 POS 5.0 Worked great on my Genie screw drive GDO..... the manufacture wanted 3x the price for the same part.
9035 Industrial_and_Scientific_5 POS 5.0 This is an excellent reflex hammer, especially for the price. I had bought a queen square but the end is so long, it's a hazard sticking out of a white coat pocket. This has just as nice a swing to it and is much more compact. It also seems like it will hold up very well even with daily use.
6142 Industrial_and_Scientific_5 NEG 1.0 funky threads and cancer warning label on product.
6671 Industrial_and_Scientific_5 POS 5.0 Expensive but great stethoscope. If you need the value, you can get the Cardiology one, although I found the Classic model of the 3M III to work just as well
85 Industrial_and_Scientific_5 POS 5.0 I bought two of them to build my house. They work beautifully and must if you are framing your house with only two people.
WHICH CALIPERS DID I REVIEW IN THIS VIDEO?
803 Industrial_and_Scientific_5 NEG 2.0 I ordered this to cut hole in fabric for 1/4" grommets. It doesn't work. Hole cutters for fabric need to be really, really sharp. This one isn't. If I hammered it 6 times it would only leave the impression of the ring. I used that impression for a guide to cut the fabric with precision scissors. These grommets spaces were too large to crimp around the fabric. Luckily I had some Dritz grommets in the sewing drawer. I used those instead. The one part of this package that did help was the grommet setters. That part I could use and the grommets fits nicely into the fabric. It would probably be good for tarps, plastics, etc. But it is not good for polyester fabrics.
4325 Industrial_and_Scientific_5 POS 4.0 Likes:
In fact, look closely at the side by side pictures below of the $100 Starrett caliper and the $30 Shop Fox caliper. We live in an era where there are times where products being sold under different brand names at different price points are really made in the same overseas factory. When you compare these two calipers side by side - it becomes clear that they are VERY similar in design / manufacture, all the way down to the screws. Sure the knurled knobs have different textures, the face has a different color / appearance, and other finishing touches that distinguish them products end up being. And the kicker - look at the weight of the two calipers - near identical. A one gram difference is negligible, and could be the difference of the type of knurled knobs used.
-----------
This was about a week ago. I then thought that, just as a trickle of water eventually can carve the Grand Canyon, so too would this drill bit eventually drill a 1 3/8" hole in the bottom of this cup. Therefore, every day I drill for about 90 minutes while I watch a movie. I am drilling by hand without a drill press, but I have attached ankle weights to my drill for a less-taxing downward force on the drill bit and steel.
It's not a lot you get, but the price is right. Just about long enough to seal off 2 cars with 4 to 6 car speakers each.
6332 Industrial_and_Scientific_5 NEG 1.0 I've the same exact type and the display fails often as though the battery is dead - but it's not. It also randomly begins to blink in a fault mode until it's turned off and reset.
Some reviewers have reported issues with the attached straw, but it worked perfectly for me.
9467 Industrial_and_Scientific_5 POS 5.0 Use the little back tabs to hold them fairly right. The black tabs go from left to right over the hook, not up and down. I also bought these and these fit a bit tighter, https://www.amazon.com/gp/product/B00HEQYDBK/ref=cm_cr_ryp_prd_ttl_sol_23
3202 Industrial_and_Scientific_5 POS 5.0 Arrvd on time & well pkd. I used it to hold my display items in a glass covered wall mounted shadow box. It has kept them in place & upright for a long time!
1236 Industrial_and_Scientific_5 POS 4.0 good product, but pricey.
It's not quiet.
1/8 fluid ounces;
I use the 2" brads to hold together small butt-jointed paint grade boxes. I could probably go shorter, say 1 5/8" or even 1 3/4"; but to be honest the 2" brads were the cheapest and work perfectly fine for my use with no blowouts, misfires or jams, which can occur with nails of lesser quality.
One thing I will mention, is that like many catalog pictures, the one in this item's description is a little misleading, as the blue background on the display in the stock photo somewhat hints that the display is backlit--which is not the case. Of course, nowhere is this promised, but it's still somewhat misleading.
9246 Industrial_and_Scientific_5 POS 5.0 Exactly as expected. Quality is good.
641 Industrial_and_Scientific_5 POS 5.0 Satisfied, Meeting our requirements.
7519 Industrial_and_Scientific_5 POS 4.0 On time and as advertised
3470 Industrial_and_Scientific_5 POS 4.0 work well, don't stick like some cheaper ones. we're using these for animal feeding (turtles and fish) and they do the job.
6543 Industrial_and_Scientific_5 POS 5.0 I ordered this for use in 3D printing, specifically for measuring filament diameter. This digital caliper is a treat after trying to do this with some old school calipers. It was super easy to use right out of the box. The case is nice quality plastic and this set came with a extra battery. Extremely pleased!
676 Industrial_and_Scientific_5 POS 5.0 good tape makes the difference, and if you plan ahead you can order this and not be stuck with walmart tape.
8566 Industrial_and_Scientific_5 POS 4.0 No problems with the gasket, just wish I'd gotten a smaller size
7329 Industrial_and_Scientific_5 POS 5.0 Works GREAT!!!
- dry fit everything before applying any primer and glue, but note that your fittings will slip on just a bit farther when they have glue to lubricate them; this means that you will get longer runs before you glue up your system, so account for that difference when estimating how everything looks and fits
1. Cost
8272 Industrial_and_Scientific_5 POS 5.0 Nice thing about aluminum stock, it is light for a metal, so shipping it doesn't seem so dumb. I liked these guys they shipped quickly and the price was good.
8837 Industrial_and_Scientific_5 POS 5.0 Looks good. No scratches or damages.
for anything else: maybe-maybe not. The most frustrating thing
1/2 tsp, and 1 dssp
4282 Industrial_and_Scientific_5 POS 5.0 I'm a weekend warrior to the extreme and have a lot of tools and projects. This is a super handy tool cart/work surface that I have fallen in love with.
3299 Industrial_and_Scientific_5 POS 5.0 These are great for doing small and fairly large jobs at terminating junctions. I got these in order to put in a couple Z-Wave switches to work with my Wink Hub.
7683 Industrial_and_Scientific_5 POS 5.0 Works as advertised. Dries quick. Easy to squeeze from the tube.
better choice. For joining metal "J&B Weld" epoxy is best. Most epoxies dry with little running or shrinkage, and so are good for filling gaps. Fiberglass epoxy is best for joining/filling hard plastic. Epoxies are safer than Goop, and cure much quicker. The major drawback to epoxies is that they consist of two parts (resin and hardener) which must be mixed in small batches, and then applied with your own applicator (e.g., a toothpick). Some are packaged in a dual-syringe---but that is not an adequate solution, because the components must still be manually mixed in order harden to maximum strength. Previously, a major drawback was that all epoxies were colored (usually white)---but now clear epoxies are available. For example: J-B Weld 8265-S Cold WeldCLEARBOND H-3S Clear Strong Epoxy Adhesive Syringe - .85oz
3257 Industrial_and_Scientific_5 POS 4.0 We're setting up a hobby darkroom, and I got this to use for preparing stock solutions at around 100F.
6921 Industrial_and_Scientific_5 POS 5.0 does a great job of cleaning my files, no complaints, good value
8907 Industrial_and_Scientific_5 POS 5.0 Used on a 60" drawers for a truck bed. Glides smooth as glass for the weight on them.
1559 Industrial_and_Scientific_5 POS 5.0 Provides an excellent "temporary" seal for a cast aluminum boat hatch. The seal is between the boat and the deck. I use a standard hatch seal for the opening part. I have used a similar arrangement before and found the seal lasted for more than nine years (under demanding conditions), and would have lasted longer if I had not removed the hatch for repainting. However, I would not use the 9/16 foam tape for a plastic hatch or port-light as there is a good chance of distorting the flanges when it is screwed down, thus causing them to crack.
3071 Industrial_and_Scientific_5 POS 5.0 Works well for my nailer.
1278 Industrial_and_Scientific_5 POS 5.0 I give this a 5*, with a few thoughts. It works well, cleans well, & I like how the dispenser trigger works. About 2 months ago I ordered a Hoover Steam Vac Spin Scrub. It works well, too. But, it's priced better even at Amazon. AND it's actual label states 12amps. I bought the Spin Scrub for the mother-in-law. That model has a hose and attachments for cleaning stairs, furniture, etc.. Now maybe more power is needed (12amps) when hoses and attachments are added. Maybe. This new C3820 Commercial states 12amps in the Hoover information, BUT it's actually only 7.9amps. The two seem to work equally well. They seem to be the same weight, but I didn't check that out. This C3820 has an orange and maybe longer commercial grade cord. Everything else seems the same, again, but this one lacks the hoses and attachment tools. I've had several Hoovers over the years and wish to point out something important. The Spin Scrub came with a plastic tool to clean out the take up shoot, the C3820 did not. In time the shoot needs cleaning. Also, Hoover now has a small clear plastic window to the right side on the front. Once in a while you need to snap that window off and clean the screen filter right behind it..Hoover got smart and makes it much more accessible. A dirty screen will very definately interfere with take up suction of your dirty water. These are very good machines, and I do endorse & recommended Hoover.
4693 Industrial_and_Scientific_5 POS 5.0 Exactly as described.
4905 Industrial_and_Scientific_5 POS 5.0 Easy to use, good adhesion, easily formable and inexpensive. Used some to fix a radiator leak, sculpture repair, and several other things beyond my immediate memory. Sticks to most materials except polyethylene and polypropylene. Anyone with creative urges can find the occasional creative use, often where nothing else will do the job.
9880 Industrial_and_Scientific_5 POS 5.0 Simple product... magnet holds tight to the side of a file cabinet,
6518 Industrial_and_Scientific_5 POS 5.0 I love it.
I find this particular configuration to be particularly convenient. Great for emergency repair in the vehicle and on the go or while traveling. I put one 4 pack in my first aid kit right next to the Steri strips. Another in my edc man purse/pack. For a couple bucks you really cant go wrong. I do it. Thanks for reading
1640 Industrial_and_Scientific_5 POS 5.0 good
8303 Industrial_and_Scientific_5 POS 5.0 Delivered as described, well packaged and good quality. Would buy it again as needed.
1166 Industrial_and_Scientific_5 POS 5.0 for my project this was ideal.
9225 Industrial_and_Scientific_5 POS 4.0 Have used this product with cold rolled steel. Use tapping fluid and go slowly, and you will not damage the tap.
Not much to say calipers measure and this one does it well.
9852 Industrial_and_Scientific_5 POS 4.0 works fine.
8402 Industrial_and_Scientific_5 POS 5.0 Used to sharpen my Scott's reel mower blades and it works as expected.
2244 Industrial_and_Scientific_5 POS 5.0 As already expressed by other reviewers, this glue is not a good choice for plastics and it should ALWAYS be used sparingly since it REALLY DOES EXPAND in most instances. Also, DON'T let it set-up in the end of the application spout! Always clean out this area after use!
231 Industrial_and_Scientific_5 POS 5.0 Fit perfectly in my old Dayton Wet Vac.
2640 Industrial_and_Scientific_5 POS 5.0 This cart is amazing. I bought it to help me move my grooming equipment (I show dogs). It is very versatile, as described - easy to change configurations & does not take up much space in my van. Quality made and extremely durable, yet not too heavy. I know I will use it for many other purposes around my home, for example: moving wood, heavy bags of dog food, poultry grain, and other heavy bulky items. A real find! Highly recommended for anyone who owns their own business and needs to move equipment back and forth to various venues as it cuts way down on multiple loading and unloading trips. I can now move all my equipment in ONE trip!
2910 Industrial_and_Scientific_5 NEG 2.0 Very low quality,
6" 50mG
205 Industrial_and_Scientific_5 POS 5.0 This is half the price of the hardware store and does exactly the same thing. I needed one but I bought 5 because you will never see that price again!! Get it NOW!!
9982 Industrial_and_Scientific_5 POS 5.0 When repairing the coolant heater hose on a 94 GMC K1500 this aluminum fitting broke off inside the upper manifold. So I had to grind out what I could and then tap the threads back to normal with this. It worked flawlessly and easily. It never binded and I was never concerned on it breaking. The tap seems of high quality and very sharp. I was even able to put test threads in a block of wood to be sure I had the right fitting before using this tap and it gracefully threaded a 2x4 as well.
2250 Industrial_and_Scientific_5 POS 5.0 any work shop you gotta have it...works really good
920 Industrial_and_Scientific_5 NEG 2.0 Don't know how they measure these things, but this is TINY... I wanted to use it to move around some tall 1/4 barrel sanke kegs. Won't do it due to the small size. If you're looking to move something that will either fit on the tops, or in the recessed section, it should be ok. If you want to use it to move something else, look for something else. I'll probably end up getting a furniture dolly from HF at some point.
"RTV" stands for "Room Temperature Vulcanizing". People don't realize it, but all silicone adhesive/sealants that you purchase at hardware and auto parts stores are "RTV's", no matter if they say it on the label or not. (There are also specialized curing silicone's, such as the ones used in hobby and manufacturing mold making, but a two part mixable silicone is typically used rather than RTV.)
Naturally it is best to used up the entire cartridge/tube after opening, however, I was able to screw off the red cap and tightly cover over the tube opening with aluminum tape and cleaned out the red applicator tip and partially screwed the red cap back onto the tube. Hopefully, it will not dry out and can be used again for a small repair.
3074 Industrial_and_Scientific_5 POS 5.0 Seems good, I do not have a way to test the accuracy
7067 Industrial_and_Scientific_5 POS 5.0 This silicone tubing was exactly as described and just what I was hoping for. It's not floppy or stiff, it's medium.
445 Industrial_and_Scientific_5 POS 5.0 High Quality Merchandise & Fast Shipping
7954 Industrial_and_Scientific_5 POS 5.0 this rod was delivered on time and packaged well for shipment to me along with a rectangular bar, this rod will be used for a mounting mast on a tower for a amateur radio antenna I am building, this rod and bar well fits my needs. DALE
643 Industrial_and_Scientific_5 NEG 1.0 This is normally great tape, but I ordered direct from Amazon and the adhesive is all dried out.
1909 Industrial_and_Scientific_5 POS 4.0 Great adhesive and waterproof. The price was better than going to Lowes!
9716 Industrial_and_Scientific_5 POS 5.0 Good product, low price, shipped quickly.
8710 Industrial_and_Scientific_5 POS 5.0 I have worked in healthcare for 26 years, I can auscultate lung, heart and bowel sounds quite well. I read several reviews before purchasing this stethoscope and it is frequently compared to a littman. Lets look at them side by side the only difference I see is the MD is made in China. Therefore it is a littman knockoff in my view. With the quality I see with the MD it is well worth the money and it includes a lifetime warranty and parts. Hard to beat for $55.
6694 Industrial_and_Scientific_5 POS 5.0 High quality, light indeed, excellent sound. Great value for the price.
Heavy duty construction, should last a while
This model is a value sweet spot for non-professionals, offering most of everything one is looking for in accurately low frequency magnetic and electric fields.
7690 Industrial_and_Scientific_5 POS 4.0 My niece had some old screen frames and the spline was the old clay type and large. I was guessing the size I needed the best I could because no one at my local hardware stores had what I needed. I use this even though it was a bit wider but I had to cut it to make it a bit thinner which was a lot of work. SO it was a good product I just ordered the wrong diameter.
9112 Industrial_and_Scientific_5 POS 4.0 good
6283 Industrial_and_Scientific_5 POS 5.0 I've had this Fluke NC tester for several years really like it. It's by far the best of the non-contact voltage testers that I've tried. I use it all the time for simple go-no-go voltage checks on receptacles outlets. You have to be careful with it just as with any of these type of NC testers, because they can give erroneous results under some conditions, but sometimes there is just no way to gain access to physically connect test leads from a multimeter to the wiring, such as when several spliced NM cables located in a damp crawl space are enclosed in a metal junction box that has the cover fused in place and is completely encrusted with rust and corrosion, so using a non-contact voltage tester is really the only way to verify that the circuit is disconnected. In a situation like that, you really do trust your life to the NC tester and I have had to do it in more than once in the past. You would always want to verify that the voltage is off with an actual meter whenever possible, but in bad situation like I described, I know that I can rely on this Fluke NC tester until I can otherwise access and test the circuit. I've owned a couple of different model Greenlee NC testers previously, but didn't like how the batteries in them always seemed loose and would rattle around inside, so that is what initially made me switch. I now have two of these Fluke 1AC-A1-II testers and always carry one of them in my tool pouch with me at all times.
so this is probably not optimal for use with the saws.
Honeywell is very bad about having any info on their thermopiles, so I hope this review helpful.
2785 Industrial_and_Scientific_5 POS 5.0 It's works great if you use the right amount. Hard to find locally - thanks Amazon for the convenience..
5980 Industrial_and_Scientific_5 POS 5.0 tons of uses
1. A 29 gauge steel lid for a bucket (It drilled through without problems):
2' 0.5mG
7568 Industrial_and_Scientific_5 POS 5.0 This is a great product for drilling through stainless steel. It makes the job quick, easy and clean. Great price and very quick delivery. We looked at all sorts of videos. Got all kinds of tips and advice.....prepared for a long difficult task and were so pleasantly surprised that none of the preparation was necessary. This bit just took to the metal and with a little steady pressure in a very short time did its magic. I highly recommend it.
8576 Industrial_and_Scientific_5 POS 5.0 Excellent product
6811 Industrial_and_Scientific_5 POS 5.0 When you need to clamp you but phone onto an outlet. This works great.
732 Industrial_and_Scientific_5 POS 5.0 worked great!!
7489 Industrial_and_Scientific_5 POS 4.0 great step bit
9562 Industrial_and_Scientific_5 POS 5.0 This is premium industrial quality in all respects. Works exactly as advertised and my local fire inspectors were impressed.
While I haven't had an application where this tape has failed, most of my applications have not been that extreme. In one instance, I did tightly wrap this tape around a slightly fractured [stationary pedestal] shaft of a high-powered 12v Caframo fan and there have been no problems since. Other mundane applications include fixing and strengthening a cardboard retail box of a tool for which no hard plastic case was offered. With several areas covered with this tape, the retail box has become a permanent storage box.
- Sturdy construction, feels like quality materials
4479 Industrial_and_Scientific_5 POS 4.0 I gave this 4 of 5 only because I assumed from just looking at the picture not product dimensions that it was bigger than what I received. It is 16" wide and 2 3/4" tall. It is well made and I believe the hangers ant tabs on the bottom that push in will allow it to hold just about anything you could place in it. It is made of thick not flimsy material and will definitely last longer than the pegboard itself. Aside from not looking at the actual dimensions before purchase and thinking it was a bit bigger I'm very happy with this purchase and would buy again..
4848 Industrial_and_Scientific_5 POS 5.0 Excellent!
4192 Industrial_and_Scientific_5 POS 5.0 I bought these primarily for mixing equal parts of epoxy glue, but they are also very handy for measuring rose spray and weed killer for my flower garden. They are economical and handy to have around.
9512 Industrial_and_Scientific_5 POS 5.0 nice
9024 Industrial_and_Scientific_5 POS 5.0 These 18 ga nails work perfectly in my Dewalt DWFP12231 Brad Nailer. Perfect fit perfect function. You can't go wrong with these!
5692 Industrial_and_Scientific_5 POS 5.0 AWSOME!!!!
6627 Industrial_and_Scientific_5 POS 5.0 Worked as advertised
5646 Industrial_and_Scientific_5 POS 5.0 Tru-Flate is well known for it's air line fittings. I have use many of them over the years and this one is much the same as the others. Over the past year I have ordered and used many different brass fittings. This is one of them. No Tru-Flate fitting has ever failed me. The threads are well within specification for NPT design. When wrapped with PTFE and tightened properly (not over-tight..) they should not leak. The barbed shank is longer than most others and holds tightly to hose. Once again, when clamped properly there should never be a leak. The hex shape on the exterior is perfect for use with a typical open-end wrench. Nicely machined and finished.
5528 Industrial_and_Scientific_5 POS 4.0 Works as expected.
I've used the cheaper, $100-$150 steamers in the past and this definitely beats the socks off of them. The scrubbing is better and the brush head is much wider (which means fewer passes). If you're tempted by the cheaper ones and have more than a couple of rooms worth of carpet, I'd rethink and go with something like this. Overall, I'm very happy and I love how clean my carpet is now!
6458 Industrial_and_Scientific_5 POS 5.0 Awesome
1411 Industrial_and_Scientific_5 POS 5.0 When I purchase anything tape related, the only brand I will buy is Scotch. If there is one thing I can't stand, it's crummy quality tape. Bring on the HD shipping tape from Scotch! I routinely ship things from my small business that are heavy, so having a quality and strong shipping tape for the boxes are a must. There is no doubt in my mind that my packages arrive safely and securely when I'm using this tape. This tape also saves me time because I only need to use one strip of tape rather than 2 or 3 runs of tape with a lesser quality and thickness alternative. This package of 6 rolls is neatly packed in a shrink wrap and it makes it very easy to get a new roll. The tape is noticeably thicker than it's traditional counterpart but still cuts easy with scissors or a packing tape dispenser.
5195 Industrial_and_Scientific_5 POS 4.0 I bought six (I live on a farm with a lot of large machines.) of these from Woot. The quality, fit, finish, etc. is great. I agree with a lot of other reviewers that the valve handle/carrying handle/fill opening interaction is uncomfortable and cumbersome. Note, however,that the ess-shaped valve handle is configured for a purpose: when fully retracted, it lifts the fill lid a bit allowing the can to vent thus increasing the fuel flow. After some use, I expect most of these issues to disappear. In the meantime, no more messing with leaky, dangerous plastic gas can junk!
It comes with two fittings but check to make sure it fits your machine before ordering.
6116 Industrial_and_Scientific_5 POS 5.0 I used these for securing cable on a brick building, if you are doing the same make sure to purchase some anchor shields. I picked up some size #6-8 plastic anchor shields from Menards and they worked perfectly with these clips, much better than using the traditional clips with the nails.
1707 Industrial_and_Scientific_5 POS 4.0 I needed some larger diameter wheels, with greater capacity. I also was intrigued with the locking assembly and load capacity was more the double what I needed, and it fit my budget for the job.
4729 Industrial_and_Scientific_5 POS 5.0 This is my first order from Amazon for this cement. It is the kind I could not find for years down in S.E. KY. Finally tried Amazon and would't you know that it was being sold here! This allows me to repair ABS boxes and trunks on motorcycles and glue hand held radio battery cases and charger cases back together after repair.
6964 Industrial_and_Scientific_5 NEG 1.0 The ID is actually smaller than most other brands.
5210 Industrial_and_Scientific_5 POS 5.0 a must have for rv owners!
3867 Industrial_and_Scientific_5 POS 5.0 Works as expected. Works real well when bonding objects that will get warm or hot.
Very surprised with how good the quality is for the price, compared to what I shopped around. Carry case is pretty standard, includes a spot to keep spare batteries and such.
392 Industrial_and_Scientific_5 POS 5.0 It's hard to draw that fine line of where the ol' Black & Decker reputation ended and the quality of DeWalt begins. So far I've never been disappointed with anything I've purchased with the DeWalt name on it, including this product. I know that I pay more for schtuff with the DeWalt name on it, but in the long run it's usually money well spent when compared to other products.
You don't need much at all.
3553 Industrial_and_Scientific_5 NEG 2.0 This was a nice idea but it didn't work well. Not heavy enough to actually clean and the brushes stopped spinning almost instantly. I sent it back.
7218 Industrial_and_Scientific_5 POS 5.0 Works perfect and is excellent quality. I am pretty sure I will be able to use this forever, much better than vinyl.
9695 Industrial_and_Scientific_5 NEG 2.0 It must be working because it sticks my fingers together. But, the objects needed to be glued do not stay.
7941 Industrial_and_Scientific_5 POS 5.0 Excellent extrusion very high quality!
5671 Industrial_and_Scientific_5 NEG 1.0 sprays like theres a clog in it, shook it like crazy, still a bad uneven spray. they make a break cleaner thats great, the grease can needs some work, also the red nozzle to attach to it would hardly go on. I'll be going back to wd40 brand
6780 Industrial_and_Scientific_5 POS 5.0 Used this for an EMT course, and they worked well -- maybe not as well as some of the higher end models but great for sampling breathing sounds and heart beats. The build quality is great as they're powerful (tapping on it will blow your ears out so don't). Miss those pre-med days already reviewing this product! Cheap and efficient on Amazon you won't find it cheaper elsewhere, and trust me you won't want used ones on ebay as I've had friends buy them with ear gunk left on them.
4238 Industrial_and_Scientific_5 POS 5.0 Great Piece, Works Great!
The way I apply this onto a CPU is to clean it using a 2 part solution (both the CPU and the heat sink must be cleaned) Add a small dot to the center of the CPU and apply the heat sink over top. At this point you can be happy with the coverage or you could twist the heat sink slowly and spread the layer a bit better before locking it down to the motherboard. Depending on your tech level, this is a great thermal paste that has a lot of different uses to improve performance in many different electronic devices.
7684 Industrial_and_Scientific_5 POS 5.0 Didn't fit, but that was my mistake. For the right screen door this product should work great.
4639 Industrial_and_Scientific_5 POS 5.0 Nice Bottles, had an issues and the company fixed my issue by replacing a few drippers. A+
6" 160mG
6750 Industrial_and_Scientific_5 POS 5.0 SoniCare toothbrushes do a great job brushing the teeth, so much better than others I've tried as well as manual. I greatly prefer this battery operated model to the rechargeable SoniCare Essence, because there is less bathroom clutter, and replacing the AA batteries every 30 days is much simpler than dealing with all the recharging and cord placement. I'm currently using one that I bought for a trip in 2009, so it is looking old but continues to work fine. More recently I've been buying this model for relatives.
4926 Industrial_and_Scientific_5 POS 5.0 Works fine
3132 Industrial_and_Scientific_5 POS 5.0 Used this on a screw in plumbing valve seat that was constantly leaking internally. Cheap replacement seats, purchased at Home Depot are made in "China" and not concentric, due to a bad machining process, don't seat hermetically well at all. Placed "Gasket Maker" on the seat insert threads and seal area, works fine. No leaks so far.
3161 Industrial_and_Scientific_5 POS 5.0 Excellent clear adhesive Great for automotive leaks especially around cowl and windshields.
3655 Industrial_and_Scientific_5 POS 5.0 great hose for an rv.
7340 Industrial_and_Scientific_5 POS 4.0 This is a jar of an extremely volatile smelling black Goo. Is equipped for the brush in the And when you take the brush out gobs of this stuff will drip off the brush if you're not very careful. I applied it to a couple of wires that I had soldered together. It took at least a day to become dry and not tacky. The product seem to have run off of the few areas and I question the insulation that was left behind. All in all unless you have A reason for using a liquid insulator I think I'd stick with the old plastic caps or the black tape.
4979 Industrial_and_Scientific_5 POS 5.0 everything as always with amazon went perfect
3306 Industrial_and_Scientific_5 POS 4.0 They're wire nuts, what can you say? They hold the wires together
* It expands a *LOT*, use with caution or you might accidently glue your project to the table as it expands overnight! This happend to me :-)
It is a bit messy - so you want to operate on a surface which you can clean later. Leave 48-72 hours for it to completely dry
6845 Industrial_and_Scientific_5 POS 5.0 Perfect for a toddler learning to ride a tricycle. However, if your kid is a little shorter then they might have trouble with the pedals. My daughter did at first (was 2 and a half) and she runs average on height for her age. I really like the classic look of it. The tires are nice real rubber inflated tires that have a good grip. The seat looks comfy (too small to judge for me) but my daughter likes it. She loves ringing the bell, lol. I like that it sits closer to the ground, so there's less chance of her taking a serious tumble over the top of the handle bars. I wish it had some kind of little storage bag, basket or attachment point on the back so she can carry some of her baby dolls. I rigged up something with a backpack, but wish I could buy an accessory for a few of her toys to tag along.
Save yourself a lot of aggravartion, DO NOT BUY THIS PRODUCT!!!!!
6713 Industrial_and_Scientific_5 POS 5.0 The product is exactly what the description says.
6325 Industrial_and_Scientific_5 POS 5.0 Very useful tool. A must
2822 Industrial_and_Scientific_5 POS 4.0 This little tube is worth the extra couple of bucks. I noticed, immediately, a 4 degree (C) drop in temperature, after applying a fresh layer on a clean CPU.
8781 Industrial_and_Scientific_5 POS 5.0 Haven't used it yet but great price
2584 Industrial_and_Scientific_5 POS 5.0 Works great. The small size at a good price is what attracted me. I typically only need a small amount and the bigger tubes just go to waste.
2518 Industrial_and_Scientific_5 POS 5.0 Nice to know I have safe water coming out of my well. I will probably buy one of these every 2nd year to test. Lots of development going on in my area.
9987 Industrial_and_Scientific_5 POS 5.0 perfect
You can (almost) double the effective depth of cut of your step drill if you are able to drill in from both sides of a hole.
425 Industrial_and_Scientific_5 POS 5.0 I have a tarp with grommets that ripped out. I put new grommets into a webbing strap and my wife sewed the webbing onto the tarp. This worked very well. The Grommet maker is easy to use.
6" 1.5mG
3797 Industrial_and_Scientific_5 POS 5.0 fabulous as always for jb weld products
8950 Industrial_and_Scientific_5 POS 5.0 I used it, was just what I was looking for (the right price)
7382 Industrial_and_Scientific_5 POS 4.0 I'm not completely sold on liquid tape, but this brand is definitely better than others I have purchased here on Amazon.
3512 Industrial_and_Scientific_5 NEG 2.0 Spend more money and get a quality set! Don't waste your money here
895 Industrial_and_Scientific_5 POS 5.0 A good wheel. I'll probably get more sometime.
I purchased a cheap in-line electrical cut off time which allows me to select in one hour increments how long I want this to run. At the end of the time it cuts off the tumbler. At the time I thought that I would leave it running at night and let it shut itself off. However, I found that letting the brass sit in the water/soap/Lemi-Shine mixture for an extended period of time tends to dull the brass. MOST but not all of this dullness can be removed by tumbling some more but there is a slight color shift so I stopped doing this. However, the timer is still used to shut it off as a reminder to empty it.
9527 Industrial_and_Scientific_5 POS 5.0 Actually, I prefer these over the metal bushings. They seem to hold up better, and do not slip in the wheel. Recommend.
3' 1.2mG
7772 Industrial_and_Scientific_5 POS 5.0 This material has good machining characteristics. Easily drilled, cut, milled or turned in a lathe. 6061 aluminum can be welded as well.
7068 Industrial_and_Scientific_5 POS 5.0 If you have an older Insinkerator that used the wrong vinyl tubing, this is what you need to replace the cracked and leaking tubing. Tough to find high temperature tubing anywhere but a scientific supply or Amazon. Posted photo shows the Insinkerator repair. Fast delivery, all things considered, great value.
Cleans up well if you do make a mess.
9701 Industrial_and_Scientific_5 POS 5.0 ok
* You must read the directions!
5055 Industrial_and_Scientific_5 POS 5.0 Nice clean cut threads. Worked great on my project.
~ Some have had success hacking a data output cable onto these
I used to repair the seal around my garage door, and a
This set will not help you with things like refrigerators or odd shaped boxes or items like couches. The item has to be compact and easily seen over when carried at waist level.
4779 Industrial_and_Scientific_5 POS 5.0 These work great. I build a 2x4 table. And I'm sold on the whole kreg system. Get yours and as many acc you can afford you won't be unhappy I promise Thanks Pitbullma
5768 Industrial_and_Scientific_5 POS 5.0 Great product
3958 Industrial_and_Scientific_5 POS 5.0 It is what it is.
6946 Industrial_and_Scientific_5 POS 5.0 This product works pretty well if you spend the time to set it up right. I have used it on building my engine and seems to be very accurate!
8079 Industrial_and_Scientific_5 POS 5.0 Fills its purpose for sliding window and door security. Our house had windows and doors from the 80s with thin frames and shoddy locks (original and aftermarket type). I wanted something more significant that wasn't a wonky hack. I got some of these bars and cut them down to size to allow secure venting. I plasti-dipped them to stop the rust and put some 550 cord around them in loops to aid in lifting. I know it's overkill, but I find 2x4s tacky in this application and the metal bars fit snugly in the tracks, looking very sleek. Now I know that crooks would certainly have to break the windows or doors to gain entry. I'm sure if your project calls for sturdy, heavy dimensional steel bars, these should work for you too! These aren't stainless so prepare to deal with oxidation somehow.
8523 Industrial_and_Scientific_5 POS 5.0 It's tubing! It works! great general purpose stuff, I use it with inexpensive syringes & funnels for auto/bike fluids. great stuff.
Also, smear a gob of vaseline petroleum jelly into the inside of the cap so the glue doesn't sieze the cap after it's first use.
5534 Industrial_and_Scientific_5 POS 5.0 works great
3723 Industrial_and_Scientific_5 POS 5.0 good hose, good price
I took off one star because this machine is deafeningly LOUD. You need earplugs for sure, unless you have a very small area to clean. Otherwise, it's simple to use and lightweight, and gets the job done. We've had ours over a year with no mechanical issues and it's going strong with very regular (once a week or more) use.
2966 Industrial_and_Scientific_5 POS 5.0 Good instructions, easy to assemble (soldering). Tested against a 100MHz scope with good leads, decent waveforms within the range, but the upper and lower 5% have some rounding. A good starter to an economical test bench, no regrets.
Update 11/04/17: Last time I needed to replace one of these in any of our heaters was 2 years ago. All heaters turned on for this Autumn's cooler temps and are still working fine, which I am glad, seeing as the price has been hovering around forty bucks for the last six months (I have one under "saved for later" in my cart so see the price often lol). The past days of it being twenty five bucks appears to be gone :(
The machine came with several covers for cleaning and buffing, but we leave all those to the side and use the bare stiff brush heads on the tile. The spinning heads really get down into the grooves of the surface without any pressure needed from me. As long as the floor is wet enough (we use a cleaning liquid that doesn't foam up excessively), you can move pretty quickly across the floor and get great results. I can't comment on how well the cleaning pads or buffers might work, but for strictly cleaning a hard textured floor this thing is a lifesaver.
3779 Industrial_and_Scientific_5 POS 5.0 good item,good price
529 Industrial_and_Scientific_5 POS 5.0 This Irwin 10231 Unibit is a high quality set step drill, made in the USA. While it does cost more than competing off-shore bits it is also significantly superior in all respects.
2976 Industrial_and_Scientific_5 POS 5.0 They work well in my pneumatic-nailer. No jams yet - they hold well. I would buy again - highly recommended.
Drill Chuck Required to hold shank: 1/2
3745 Industrial_and_Scientific_5 POS 5.0 Great hose for the price. Good for weekend RVers.
9436 Industrial_and_Scientific_5 POS 5.0 Get your ruler out. This is the big boy hook and eye - way too big for a lot of applications. But for some there's nothing better. High quality.
These wire brushes are DANGEROUS. In Vietnam, we had a shell called the Beehive. It was fill with 8000 flechettes and fired from a 105 mm howitzer. Thats what these brushes remind me of sans the explosion. However, in this case, these wire bristles fire out continuously like rounds from a tiny M60 machine gun.
7715 Industrial_and_Scientific_5 POS 5.0 The only potential issue is that if you wanted to use bolts as big as the bolt holes allow you could run up against the protrusion in the stamping--you're not going to get an unmodified washer under that bolt head (or nut), and you're not going to turn the nut or bold head on the caster side, so think carefully before you plan to lag-screw it into wood.
These are better than wire-nuts or any other connector out there.
3397 Industrial_and_Scientific_5 POS 5.0 All have been great and if you need the look and a quality screw then get these. In the end who doesn't like a quality screw?
4112 Industrial_and_Scientific_5 POS 4.0 Product itself is quite an excellent value, and the only reasons I'm not giving it five stars are as follows:
2716 Industrial_and_Scientific_5 POS 5.0 For me, this small serving was MORE THAN ENOUGH to get the job done.
4664 Industrial_and_Scientific_5 NEG 1.0 Garbage! Doesn't stick well to surfaces
2808 Industrial_and_Scientific_5 POS 5.0 I've used this for years building machines. Easy to use, proven track record, and my i4770k temps are solid 35c idle oc'd to 3.9. It's still burning in, but I don't expect any change in the temps except a slight improvment as the paste sets.
1155 Industrial_and_Scientific_5 POS 5.0 These nail strips are simple to use. Nice tool accessory.
4752 Industrial_and_Scientific_5 POS 5.0 Love Kreg screws.
This liquid electrical tape solved the problem perfectly. Each layer you brush on is about the same thickness as a single layer of electrical tape. I brushed on three layers about an hour apart. The finish is smooth and rubbery and as thick as the plastic insulation around 14ga solid wire. This made a difficult problem easy.
Summary:
5246 Industrial_and_Scientific_5 NEG 1.0 Well it's white, it's silicone acrylic, and I used it around the bathtub. It's a simple cut the tube tip to a slant (larger or smaller) depending on the amount you will be need to squeeze out and VOILA really! It was a good price and pretty easy to use. Two weeks later, it's still there so I can't complain.
These are very strong and made with tempered steel which won't dull as you cut memory wire, and I've used them successfully on wire gauges up to size 8 copper wire without any apparent damage to the cutters. With memory wire or small gauge wires it makes a fairly clean cut. Sterling and softer metals might need some filing, but they do with any cutter. Thicker gauges will need filing.
1452 Industrial_and_Scientific_5 POS 5.0 I guess you do get what you pay for as the old saying goes. I use a lot of tape mailing packages out every day and sometimes I have to get the cheaper tape (Scotch is usually higher), but I always regret it later. The cheaper tape wrinkles up or you lose it on the roll and can't find where to start peeling again. It's so frustrating. Some rolls I have had to throw out completely because the tape splits down the middle or it has lost its stickiness. I have never had a problem with Scotch though, no matter how old it is and how long I have left it sitting around. These big rolls are great for my packages and make everything so much easier. No splitting, no wrinkling, very sticky. Love it!
1364 Industrial_and_Scientific_5 POS 5.0 great tape for rc airplanes
9111 Industrial_and_Scientific_5 POS 5.0 Always great
6806 Industrial_and_Scientific_5 POS 5.0 I don't have much experience with prolonged use of stethoscopes but having about five pairs infront of me, three cheap stethoscopes, a training stethoscope, and a littmann, I can say that this outperforms all except the littmann, which it is about on par with. Except the Littmann costs over $100 more, so I'm much less worried about damaging or loosing this one.
1543 Industrial_and_Scientific_5 POS 5.0 Works great. I used this to stop my tailgate from vibrating and i used some in different areas to stop various whistles and rattles on my truck
The solvent cleaning is for removing the LAST TRACES of oil from CLEAN surfaces. If the parts are oily, even multiple cleanings with solvent may not be enough---you may redeposit oil from your cleaning cloth or as the solvent evaporates on the surface. So, if you can detect any oil on any portion of the part, or if you have any doubt, clean it with a degreaser first. If you do not have a commercial degreaser handy, a paste of laundry detergent and a stiff brush may do the trick. Only when you are certain that there are no traces of oil is it time for the solvent cleaning(s).
Wrong. This is exactly 4 inches in diameter. Another fitting that is also 4 inches will not fit it.
4884 Industrial_and_Scientific_5 POS 5.0 I needed several of these to hook up 1/2" hoses with barbs to a 3/8" Ball Valve, worked perfectly. They are 1 1/4" long with very clean threads. Highly recommended to go from 3/8" to 1/2".
605 Industrial_and_Scientific_5 POS 5.0 very good tape
4696 Industrial_and_Scientific_5 POS 5.0 no issues
4837 Industrial_and_Scientific_5 POS 5.0 Honestly, I actually really like this tape. It's thin and sticky, but not so sticky it leaves gross residue everywhere if you peel it off. I've already used it in a bunch of DiY projects. I'm definitely getting this brand again when I run out.
2002 Industrial_and_Scientific_5 POS 5.0 Yes there are issues. The ground plug is not a 360 degree circular plug. You only get about 270 degrees of plug. Also the plugs are not polarized (as long as the ground is there it shouldn't matter).
7309 Industrial_and_Scientific_5 POS 5.0 great
623 Industrial_and_Scientific_5 POS 5.0 Once you go 3M, you never go back! Honestly, once you try them, all others will seem either too stiff, too soft, too wide, too narrow, too sticky or not sticky enough... Well, well, well, this is it then!
8384 Industrial_and_Scientific_5 POS 4.0 Good stuff, fairly thick but easily fits under a grill cover for a case fan, which is what I'm using it for. Only problem I had was that it showed up bent, not the manufacturer's fault. It's thicker than most perf aluminum that you see, heavier duty, very easy to shape. I domed it a little (made it convex) with a ball peen hammer, finished the circular edge with a piece of circular silver solder...viola, custom fan grate, any size I choose.
4124 Industrial_and_Scientific_5 POS 5.0 Seville equipment is superbly designed and fantastic value and this one is no exception. Hard to imagine one can by so much quality for so little money, especially on sale as we did. The only negative and is a slight one is that I had difficulty pushing the posts into the table top. Unusual as Seville products usually go together very smoothly. Had to put the top on carpet and pound the feet into it upside down.
9821 Industrial_and_Scientific_5 POS 5.0 I added this foot switch to my scroll saw and it works great. Lift your foot and it stops. I set my speed on the top and it is ready to run.
1905 Industrial_and_Scientific_5 POS 5.0 Good strong versatile tape serves many needs.
- Pliable
2215 Industrial_and_Scientific_5 POS 5.0 Best glue available for certain jobs.
4625 Industrial_and_Scientific_5 POS 5.0 Great experience
> Open working time 10 - 15 minutes
3234 Industrial_and_Scientific_5 POS 5.0 Saved what the A/C service technician said was the need for a new system.
-Glue is not clear but yellow. Very noticeable, not good if you really want a clean finish.
7173 Industrial_and_Scientific_5 POS 5.0 came on time and just as described
5936 Industrial_and_Scientific_5 POS 5.0 Great for sealing crack problems with this sealant., fasst shipping
CON:
To me, it was worth the purchase. I'd recommended to anyone with similar world views and outlooks on life.
I installed the switch in my project case and it functioned exactly as designed. The switch is a little on the "stiff" side in use...not at all like a wall switch. I like the stiffness of the action because it makes the effort to use the switch a definite one. You will never operate this switch accidently. The switch looks as good as it works. It is fashionably commercial looking, adding a bit of flair to a visible mechanical project.
2429 Industrial_and_Scientific_5 POS 5.0 I had a flat tire on my truck. That is a huge problem for a person with a crippled hand and no help !!! This little guy worked very well. The only issue was that I could not figure out how to tighten the handle. I was still able to use one hand and it was so easy for me to do. I am so happy I got it, and it had one day shipping as well. A++
1231 Industrial_and_Scientific_5 POS 5.0 I bought these for use in my Milwaukee air gun, worked perfectly. Will buy more when I need them for another project.
Two years ago, rust holes appeared in the deck of my walking mower. I wanted to keep the mower because it worked fine and the deck was strong. At the same time, I was afraid a hole in the deck could result in an eye injury. With EMT shears, I cut suitable pieces from a tin can. I stuck them over the holes with JB Weld. After two years, the repairs look fine.
2839 Industrial_and_Scientific_5 POS 5.0 Arctic Silver 5 is the best thermal compound on the market. There are other types that might be better for specific purposes (Arctic Cramique for example), but for cooling a CPU, this is the best. I've used it extensively for quite a few computer builds as well as a few 'special projects' like replacing the thermal compound on an Asus Formula X48 motherboard's Northbridge and Southbridge heatsinks.
JB
8579 Industrial_and_Scientific_5 POS 5.0 Great tape, strong tear strength and strong adhesive properties. I always have a roll of this around the house.
6007 Industrial_and_Scientific_5 POS 5.0 I love it. Its a quality stethoscope and it very light.
6117 Industrial_and_Scientific_5 POS 4.0 What can I say regarding these little clips? they work as intended and allow you to mount a cable in a situation, where plain grips with nails does not work (i.e. when you need to attach cable to a reinforced concrete wall, where nail simply won't go in). If it was a bit cheaper, i'd be a bit happier :)
nails so you get an even pattern. (75 nails are provided for installation). Be sure an nail to the smaller edge side and
4045 Industrial_and_Scientific_5 NEG 2.0 Ok
The bit fits standard 1/4 hex drivers, but the shank section before the groove is a bit shorter than normal (see photo). This is no problem whatsoever in magnetic drivers. In my non-magnetic Makita impact driver the bit had slightly more in-and-out play than usual, but it did not affect drilling performance. (I warned you I was nit-picking!).
4700 Industrial_and_Scientific_5 POS 5.0 Not much to say - it's Krazy glue and it works just as it always has. No complaints here and it seems as though the same formula is being used or maybe has been improved upon - either way its transparent to me if they have changed anything. It works just as it always has and I will continue to use it when the application requires it.
4567 Industrial_and_Scientific_5 POS 5.0 good items Thanks
9378 Industrial_and_Scientific_5 POS 4.0 Works great
6736 Industrial_and_Scientific_5 POS 4.0 These things are great. I've used these for over a decade, and was issued these in the Army. So of course, when I needed to get shears for my trauma kit, these were the obvious option. They are well worth the money, and their design makes them much stronger than they appear. I have personally cut through metal with these, and they will cut a penny in half easy. They will not glide like regular scissors though, so don't count on that.
9567 Industrial_and_Scientific_5 POS 5.0 Clear Vinyl Tubing, 3/8" ID x 1/2" OD x 100' Use this hose for my wine making. Would order again.
The Gorilla Glue Company makes many different glues, in different colors and container sizes. The one I am reviewing is the 2 oz. size of the original brown colored Gorilla Glue. This glue will dry out in the bottle, so I do not recommend buying larger bottle sizes, unless the glue will be used in the near future. For most of us, we use a little glue, and put the bottle away until needed the next time. This glue is interesting, in that you wet the surfaces, add a thin layer of glue, and clamp the surfaces together for 1-2 hours. In the meantime, the glue will expand and turn into a hard foam. After application, any exposed expanded glue may be peeled away or squashed back down a bit while it is drying, so that the repair is not so noticeable. This stuff will eventually dry as hard as a rock. Overall, I would give this glue an Amazon rating of four and a half stars, rounded off to five stars, as Amazon requires ratings to be in whole numbers.
4421 Industrial_and_Scientific_5 POS 5.0 Good quality lashing straps. Clean and quality stitching on the webbing.
manufacture again !!
If you need a small vacuum to clean out your cars, this is the ticket. I have a full size vacuum to clean up around the shop. Just because the name of this vacuum is "Shop-Vac" it surely does not imply this is a vacuum for a wood or machine shop. For that you need a larger hose and something more powerful.
917 Industrial_and_Scientific_5 NEG 2.0 Don't plan on using these much. They are much weaker than you would imagine. I have an empty vending machine that totaled all 4 of them. I'm not sure what else you'd use them on. Nothing over 100 pounds for sure.
Doesn't hold up in moderately high temperatures
8847 Industrial_and_Scientific_5 POS 5.0 I'm working on a project that needs some PVC (easy to assemble pieces with PVC cement) and searched for this product. The 3/4" thickness is important for the stress of the project, a perpendicular tube infused into a hole drilled into the PVC sheet.
9625 Industrial_and_Scientific_5 POS 5.0 Very tough and rigid bin. Like most folks here, I use it with an Oneida Super Dust Deputy hooked up to a 1.5hp collector. The bin will not collapse under pressure from a 1.5hp collector, even when the motor is mounted directly on top of the dust deputy. The lid is flexible but very strong, I've had the total weight of the motor and dust deputy sitting directly on top without any support (just me keeping it from tipping over) and it held it just fine.
9009 Industrial_and_Scientific_5 POS 5.0 Never had any issues with jams and I use these in a cheap off-brand brad gun.
5607 Industrial_and_Scientific_5 POS 4.0 These are great quality bags. Thick and sturdy. A little tricky putting them on but once you got the hang of it, it's just a snap. Hypo-allergenic until you remove the bag from the vac. Make sure you don't put it too close to your face.
Cons:
They are the usual excellent quality
It's by far the strongest tape I've found, much stronger then duct tape ~
699 Industrial_and_Scientific_5 POS 5.0 Arrived quickly and far cheaper than buying it at a store. If you can wait the few days, it is a good buy and I have never had issues with Scotch brand tape.
272 Industrial_and_Scientific_5 POS 4.0 These are great for any demolition or cleanup work you need to do. Priced competetivley here on Amazon, they give you exactly what you ask of your tools. They go to work and don't let you down. Have used them for several projects and they hold up to a beating.
6826 Industrial_and_Scientific_5 POS 5.0 I had to trace a number of curcuits behind drywall in a home renovation project, this tool made it possible.
6235 Industrial_and_Scientific_5 POS 5.0 Works great.
6213 Industrial_and_Scientific_5 POS 5.0 Great Product, People, Service!!!! Would definitely Recommend this product to anyone!!!!!!!
2065 Industrial_and_Scientific_5 NEG 2.0 i recently ordered this online thinking it would help me cure my gingivitis, well 4 days of using this 2 times a day i am now starting to think other wise...
4896 Industrial_and_Scientific_5 POS 5.0 good
4428 Industrial_and_Scientific_5 POS 5.0 Very well made and strong. Not sure how they would slip in the wet as they have a spring loaded mechanism which gets tighter the harder you pull. Unless you put the strap in backwards....
8396 Industrial_and_Scientific_5 POS 5.0 Arrived quickly and was 1/16th longer than advertised. Nice and thick, exactly as described, I am very pleased with this transaction.
50 Industrial_and_Scientific_5 POS 5.0 This is the best glue I have ever used...great holding and bonding power, on everything I have used it on, thus far.
7937 Industrial_and_Scientific_5 POS 5.0 Nice material, arrived as described and packaged in a sturdy cardboard tube, protected from the elements and accidental damage.
Some of the automated smart stuff bears watching.
8588 Industrial_and_Scientific_5 POS 5.0 Does its job
8281 Industrial_and_Scientific_5 POS 5.0 awesome material
6219 Industrial_and_Scientific_5 POS 5.0 Very good product in my opinion. Been using it several times. Just make sure you follow the instructions on its usage.
3027 Industrial_and_Scientific_5 POS 5.0 good adjustable straps for large items
9129 Industrial_and_Scientific_5 POS 5.0 WD-40 Is simply the best in class product you can use to clean up and loosen rusty parts.
2030 Industrial_and_Scientific_5 NEG 2.0 As a general rule, fluke makes top quality products. My fluke multimeter and amp clamp I can absolutely count on to verify a component as good or bad. This is why I willingly paid over 400 for my multimeter instead of getting a cheaper one.
144 Industrial_and_Scientific_5 POS 5.0 Snaps on very secure.
9992 Industrial_and_Scientific_5 POS 5.0 Excellent.
5575 Industrial_and_Scientific_5 POS 5.0 There is no reason to buy the more expensive connectors.
I happen to own some low cost import step drill bits (a Neiko 10193A set, in near new condition). It is immediately obvious that the Irwin bits are better quality than the Neikos in appearance and legibility of the step-size markings. Ill post a picture showing an Irwin and Neiko side by side. In use the Irwin bits cut sheet metal faster, producing smoother edges (less burrs) and more well rounded holes. For rough work on a tight budget the Neiko may be a good choice. Otherwise Id recommend the Irwin bits.
3018 Industrial_and_Scientific_5 POS 5.0 For people who like to do projects around the house this item is good to and wooden moldings to the walls
4427 Industrial_and_Scientific_5 POS 5.0 This seems to be holding very well to use - it is easy to install, easy to take off, the band has not frayed in a couple of months of moderate use. I like this a lot.
8467 Industrial_and_Scientific_5 NEG 1.0 I guess you really do what get what you pay for sometimes. This bundle sounded like exactly what I needed. What I got was a lot of very small tubing and only a few larger ones and all of them are the absolutely cheapest quality heat shrink wrap that you can possibly find. I used it once and then tossed the remainder because it is basically garbage. I can shrink wrap cabling better using a plastic garbage bag.
4079 Industrial_and_Scientific_5 POS 4.0 On time and as advertised.
4010 Industrial_and_Scientific_5 POS 4.0 Ok !
6017 Industrial_and_Scientific_5 POS 5.0 It's vinyl tubing, not really sure what else you can say about it. Will be using it to siphon batches of mead and I'm sure it will work as planned.
6284 Industrial_and_Scientific_5 POS 5.0 This is a very helpful tool that works perfectly. I wouldn't change a thing on it. I use this so frequently that my wife is getting tired of the beeping.
9468 Industrial_and_Scientific_5 POS 4.0 Hey pegboard hooks, they fit the pegboard and hold the items that are placed on them.
1059 Industrial_and_Scientific_5 POS 5.0 easy way to fasten cable to baseboard
I ordered up this pipe dope with PTFE, which I could not find at my big box hardware store locally. I applied the product per the label, fit everything back together and no leaks. Since then, I have used this on every plumbing project I've done and continue to have no issues. I wish I would have used this from day one, but live and learn. If you have to back the fitting off, no worries, just clean up the threads and re-apply when you put it back together. Very easy to use and work with, you can't go wrong!
583 Industrial_and_Scientific_5 POS 5.0 Best electrical tape I have used!
6087 Industrial_and_Scientific_5 POS 4.0 Your typical glass hydrometer. Comes with a two piece plastic storage container that nicely protects the hydrometer. Comes with a paper the lists three scales: Brix, % alcohol & specific gravity. I recommend "calibrating" the hydrometer just prior to use by measuring a sample of distilled water to find how far off it is at room temperature.
6530 Industrial_and_Scientific_5 POS 5.0 This replaces a cheap plastic caliper and have found it a real step up. I really like the easy to read dial. I'm sure there are better calipers out there, but for the price this one suits my needs. Bought this because of someone else's review that looked closely at the machining of the parts etc. His recommendation seems to be a good one. Pleased with the purchase.
5758 Industrial_and_Scientific_5 POS 4.0 definitely better than, regular duct tape.
9874 Industrial_and_Scientific_5 POS 5.0 I build short retaining walls using 4x4 posts and 2x12 planks (all treated wood). These fasteners make for an easier and faster job.
6306 Industrial_and_Scientific_5 POS 5.0 excellent quality, still works well with the original battery a year later
1205 Industrial_and_Scientific_5 POS 5.0 Used this to seal my apartment's front door and windows. Compresses super far so shutting the door wasn't difficult at all. Works great. =)
7718 Industrial_and_Scientific_5 POS 5.0 Worked as advertised.
6499 Industrial_and_Scientific_5 POS 4.0 good
3216 Industrial_and_Scientific_5 POS 5.0 This is good product
The caliper feels solid in the hands. A good weight, not cheap or flimsy, and the thumb-adjustment, while preferential to right-handed people, is very easy to use. I found in general use that there was little to no play in the slide between the time I took the measurement to the time I locked down the top pin.
When handling this type of organic solvent, I recommend using it in a well-ventilated area and wear cartridge-type mask/respirator.
2963 Industrial_and_Scientific_5 NEG 1.0 The instructions are outdated. It's a minor issue, but not one that'll stop a seasoned electronics vet, but a noobie might trip up on it. It has a few capacitors with higher voltage ratings than the instructions list. For me or anyone not new to electronics, you can use the power of deduction and some common sense to figure out where they go. No biggie. Could cast doubt for a complete noobie who's just getting into electronics. But like I said, minor issue.
5335 Industrial_and_Scientific_5 POS 5.0 great product
(3) It is very bulky as another reviewer mentioned, making it a poor choice for something to be picked up and truned over to be emptied repeatedly.
929 Industrial_and_Scientific_5 POS 5.0 My husband bought this for a small greenhouse he is building and loves the quality of the plastic. Very heavy duty.
5648 Industrial_and_Scientific_5 POS 5.0 great fitting for fuel line installation after I installed an under deck fuel tank in my boat with an outboard.
When is a step drill better than a standard metal drill bit?
2437 Industrial_and_Scientific_5 POS 5.0 They are as advertised, look well made
2135 Industrial_and_Scientific_5 POS 4.0 Good enough. While certainly not "surgical grade," it'll suffice for everyone else.
6539 Industrial_and_Scientific_5 POS 5.0 I've handled calipers for forty years. First verniers, then dials, then digitals. When digitals appeared they cost ten times what this one does, and didn't work any better. I like the large display on this one, as my eyes ain't what they once was.
3535 Industrial_and_Scientific_5 POS 5.0 Good product
5713 Industrial_and_Scientific_5 POS 4.0 There's not a lot to say about a product like this. I bought these for extra support under my outdoor spa. They do the job. The Amazon description leaves a lot to be desired but if you go to the Akron website you will get an accurate description of each model. I would suggest doing that to be sure you order the right size. The post does not attach in any way to the bottom flange, it just sits on it. If someone kicked the post hard enough it would slip out. That could be a concern in some situations. The vendor, BIC, was excellent. Product arrived on-time, well packed and they sent a personal follow-up email to see if I was satisfied. It's the first Amazon vendor who has ever done that.
5359 Industrial_and_Scientific_5 POS 5.0 good fitting and worked great
1607 Industrial_and_Scientific_5 POS 4.0 Owning a house I am constantly fixing something. I use a lot of this Dap Dynaflex 230 premium indoor/outdoor sealant. This product is nice to have around as it dries clear and so it goes with almost any repair on any color. It is even paintable. This product makes a flexible waterproof seal that is also crack-proof. It is good to seal out water or air leaks around doors or windows.
8352 Industrial_and_Scientific_5 POS 5.0 I use these to link pieces together in some of my carvings. I always have some sitting around. Have used these in knifemaking as well
5968 Industrial_and_Scientific_5 POS 5.0 worked great, did my whole driveway. Saves time and money because cracks take less sealant to fill
3355 Industrial_and_Scientific_5 POS 5.0 Black color is the best!
ME3830B - Standard Electromagnetic field meter for Low Frequency
Update:
3515 Industrial_and_Scientific_5 POS 5.0 ok
7511 Industrial_and_Scientific_5 POS 5.0 I had a very cheap version of this tool (not of this brand) many, many years ago and it was totally worthless, fit only for the garbage can. So when I ordered this step drill in an attempt to cut a 1 1/8" hole in mild steel, my expectations were not high. But I was absolutely wrong. This little beauty drilled four holes through 3/16" thick steel and looks as if it was still brand new and untouched!! I'm very impressed and would recommend it, especially for use in a drill press.
1912 Industrial_and_Scientific_5 POS 4.0 It is not transparent - it has a lot of white threads in it. The threads are arranged lengthwise and cross wise but otherwise not at an angle to the side of the tape. The backing material is clear, but it tape itself is not. Frankly, you won't be happy with this if you want completely clear tape.
I highly recommend this for 3D printing applications and will likely get more once I run out. The only downside is that it is slightly tacky and might not be good for long runs of filament. I use primarily 1ft sections and it works well for that.
4135 Industrial_and_Scientific_5 POS 5.0 It works well and is easier to use than running sandpaper along the edges of a piece of sheet metal to remove the burrs.
7798 Industrial_and_Scientific_5 POS 5.0 Perfect for the project that I had. The length was 1/2" longer than required. The dimensions were exacting. Will purchase again.
1240 Industrial_and_Scientific_5 POS 5.0 Needed these for a project on the farm. Worked perfectly in my Milwaukee gun. Will buy more when I use these up.
7414 Industrial_and_Scientific_5 POS 5.0 I love liquid electrical tape. This stuff works great. You wipe on with the self contained applicator brush and it dries quickly. The thinner the coat, the quicker it dries. After it dries, if you want a thicker coat, apply more and allow to dry. You can repeat this process until you reach your desired thickness. It is a little hard to maintain a consistent thickness throughout simply due to the nature of the compound and how quickly it dries (or starts to become tacky).
4806 Industrial_and_Scientific_5 POS 5.0 Great! Works just like it should. Good price and fast shipping.
With this super-sticky stuff, I can easily attach (and detach) those items without causing any damage to the walls. No other two-sided tape I've seen (even the 3M Command strips, which are great for posters) is this powerful. That mounted items can be so easily adjusted and removed on-the-fly is a huge plus. This is an extremely versatile, useful and inexpensive product.
3908 Industrial_and_Scientific_5 POS 5.0 Worked the same as the stuff you buy in the store.
5994 Industrial_and_Scientific_5 POS 4.0 Relatively good value. Accurate voltage readings. Not high quality but it is workable. I would buy it again. Nice paint job.
1733 Industrial_and_Scientific_5 POS 5.0 This glue is STRONG. Don't get it on your fingers.
4565 Industrial_and_Scientific_5 POS 5.0 Anything to do with this senco screw gun system is one of the best things that happened to the constitution/remodel industry in years from drywall to plywood to concrete board
764 Industrial_and_Scientific_5 POS 5.0 Good Switch does what its designed to do
They do seem to hold up better/longer and the texture is nice. I think they're worth it.
Spend $10 more and get the iGaging EZCal which was the best digital caliper in the $30 and under group.
It ships in an enormous box and is about 90% assembled. I'm not sure how it was delivered - it just showed up on my driveway. There is NO way a human being can lift this alone, as it weighs probably 200+ pounds.
3181 Industrial_and_Scientific_5 POS 4.0 It does exactly what I needed it to do, and will surely do many other things besides. I have a caddy hanging from my shower head in the tub, and it kept slipping down the pipe it is clamped to. For awhile I wound tape around it, and the "bump" held the shower caddy in place. But it was unsightly. Made a "bump" with the silicone adhesive, and the caddy stays in place just fine, it isn't unsightly, and the caddy can be easily removed to clean it.
148 Industrial_and_Scientific_5 POS 5.0 works great,exact replacement
7569 Industrial_and_Scientific_5 POS 5.0 I bought this bit for drilling tube socket holes in an aluminum chassis
1397 Industrial_and_Scientific_5 POS 4.0 Excellent packing tape but a overpriced.
9634 Industrial_and_Scientific_5 POS 5.0 Wow. I was not expecting how solidly this is made. I'm using this with an Oneida Dust Deputy for sawdust collection. The vacuum did not even begin to collapse this container. The top seals very well, yet removes very easy. For my application, I don't even need the metal sealing ring. I would buy this container again in a heartbeat and will look to Eagle containers if I need something larger.
332 Industrial_and_Scientific_5 POS 5.0 Works as expected. I don't have to move the vac as much now
5333 Industrial_and_Scientific_5 POS 5.0 I use this to seal all my accessories on my kayak. Works perfect. Take a little while to dry. Easy to use and remove from hands and skin.
4440 Industrial_and_Scientific_5 POS 5.0 Great product :}
8005 Industrial_and_Scientific_5 POS 5.0 Excellent
9160 Industrial_and_Scientific_5 POS 5.0 Great Product, People, Service!!!! Would definitely Recommend this product to anyone!!!!!!!
5555 Industrial_and_Scientific_5 POS 5.0 Great product
7243 Industrial_and_Scientific_5 POS 5.0 This percussion hammer works well and was constructed with sturdy materials. It can handle daily use.
These things are tough as nails and super-smooth. Brake mechanism works very well and overall quality of fit, finish and so on is quite good.
4660 Industrial_and_Scientific_5 POS 5.0 They are zinc washers. Not much to say really. Quality control in this brand seems to be very good. No bent washers or washer with clipped edges in the box like with some other brands. They suited my needs perfectly.
2057 Industrial_and_Scientific_5 POS 5.0 I do TV Repair and have purchased cheap probes up until now. Nothing compares with this probe set. Nothing. Amazon pricing is on the money.
7428 Industrial_and_Scientific_5 POS 4.0 Needed for use with roloc pads
1062 Industrial_and_Scientific_5 POS 5.0 Works as intended.
5742 Industrial_and_Scientific_5 POS 5.0 Fixed my garage door opener in 15 minutes. I'm so happy this was available. Make sure you keep it lubricated. I gets louder when it starts to run dry out. Needs to be lubed about once a year.
The heating is fairly fast with 16 Oz of water (*) and it's ready to operate in about 5 minutes.
2061 Industrial_and_Scientific_5 POS 5.0 As for this model TL71, they still make them like they used to. The thick rubber like material that is supple to the touch and so easy to handle (work with) and bought at a very competitive price. Much obliged with this offering.
2358 Industrial_and_Scientific_5 POS 4.0 Nothing much to say here - easy to use, accurate, and convenient. Pleased and will buy again.
I have a 20 ton shop press at home and when pressing bearings on and off, this air jack makes short work of doing so. Instead of repeatedly ratcheting the stroker, with compressed air, you just press a lever. It does make quite a bit of noise when operating, but that is totally understandable. The release is the same type as all other bottle jacks, twist of a valve to release the pressure.
2. The FOUR different size tips is awesome, can accommodate many size rivets.
101 Industrial_and_Scientific_5 POS 5.0 They work well
3. It worked fine for us, so we recommend it to others.
429 Industrial_and_Scientific_5 NEG 1.0 Tried it on aluminum and a steel hole I drilled and does not cut. Seems the blades were ground flat. Had to return.
-Tall enough to accommodate another shelf.
3809 Industrial_and_Scientific_5 POS 5.0 Perfect
2338 Industrial_and_Scientific_5 POS 5.0 Work very well. I used to use case lube that had to be wiped off. This lube goes a long way and only requires a paper towel for application and maybe clean up. I do not wipe it off so that the lube stays on. Never had a miss feed so I love it.
5). Not a huge fan of the plastic snap-collars that hold each component along the four poles--they kept sliding out if not slid down level.
Other details and observations:
5908 Industrial_and_Scientific_5 POS 5.0 This is the most amazing tool I have ever used and I'm 70, if you need to pull T posts this is the best tool you can buy just remember to get it a close to the post as possible it is a mule.
7687 Industrial_and_Scientific_5 POS 5.0 If this is actually what you need, it's perfect. I like it much better than the rope style spline that I was replacing. If you don't know what size spline you need, then you probably don't need this. Check your size before ordering, people!
208 Industrial_and_Scientific_5 POS 5.0 I was going to buy this brush vac at HD but I thought $9 was outrageous for something so simple and cheap to make. So, I bought two here and if the shipping is included you wind up paying about $3.50 per brush. Since they don't last for ever having an extra is good. I can't see any difference in quality with the one that came with my Shop Vac. I use them to suck up sanding dust before finishing furniture and wooden bowls-they work fine.
2509 Industrial_and_Scientific_5 POS 4.0 I bought each of my adult sons one of these Spinbrushes because they like the spinning brushes better than manual ones. I had previously purchased an electric toothbrush for myself but it made me dizzy - I have ear issues - and I gave it to my younger son. He didn't like it and went back to using these types of brushes.
9403 Industrial_and_Scientific_5 NEG 1.0 I tried to like this center. I really did. It's big, it feels substantial, and it's exactly what I'm looking for. The first one felt like it had positive stops every quater of a turn. I figure in any production line there will be duds, so I had Amazon send me another one (thank goodness for Amazon's easy return system). The second one is better, but I can still feel the bearings grind when I turn it. Hooked up to the lathe, at slow speeds, it feels and sounds like a pepper mill grinding pepper- not the smooth, quiet live center I was expecting. Still hopefull, I called PSI directly, figuring they would find me a good one and send it to me, I don't doubt all the other reviewer have good ones, I'm just seeing some poor QC up the chain. Anyway, I could hear the technician's superviser talking to him in the background, and he basically said that's how it's supposed to run. Maybe it will get better with time, he tells me. He said if I wanted a quiet, smoother center I should look into their more expensive package (~$80). I was pretty surprised since they advertise it as a "smooth running" center.
5478 Industrial_and_Scientific_5 POS 5.0 Simple and fail proof system. No worries about calibration or batteries to mess with.
4882 Industrial_and_Scientific_5 POS 4.0 Just what the product description said, nice clean threads, prompt delivery.
7084 Industrial_and_Scientific_5 POS 5.0 It came well packaged. dimensions meet advertised.
4846 Industrial_and_Scientific_5 POS 5.0 quality
993 Industrial_and_Scientific_5 POS 5.0 They go in fast and straight, what more can you ask for.
4699 Industrial_and_Scientific_5 POS 5.0 Krazy glue. Good price with free add-on shipping.
The switch works well, seems to be built well enough and can be screwed to my barn floor so it's always where I expect it to be.
7307 Industrial_and_Scientific_5 POS 5.0 Have used liquid tape for years on outdoor low voltage work. This is quality. Would recommend.
You can (almost) double the effective depth of cut of your step drill if you are able to drill in from both sides of a hole.
2014 Industrial_and_Scientific_5 POS 5.0 Fluke.
8273 Industrial_and_Scientific_5 POS 5.0 Just what I needed.
Summary:
6137 Industrial_and_Scientific_5 POS 5.0 My furnace condensate pump would cycle on and off as water from the drain hose that carries water upward to a sink would drip back into the pump. I spliced this into the drain hose and the frequent cycling which would reduce the life of the condensate pump has ceased. I did need some fittings from Home Depot to make this back flow preventer adaptable to 3/8 inch tubing. This item offers heavy duty brass construction so it should last forever.
VERY handy for lubing the gear set on the sheet winches.
2598 Industrial_and_Scientific_5 POS 5.0 This is a quality Loctite product. I used it to seal my tub/shower faucet and tub spigot. The clear color makes it almost invisible. The tapered dispenser tip makes it easy to drop a consistent size bead of material on your workspace. Enjoy!
7037 Industrial_and_Scientific_5 POS 5.0 This is SO much better than vinyl tubing. No kinks or permanent dents in the hose and far more flexible. Love it! Worth the extra cost.
Overall I am happy with the product and I would use it again. On new construction I believe it would be easier without the soap film issues.
6202 Industrial_and_Scientific_5 POS 5.0 Can't get these any cheaper.. especially with Prime.
1711 Industrial_and_Scientific_5 POS 5.0 These are really good strong casters. I added them to a Sears workbench and improved the versatility of my garage shop quite a bit.
3038 Industrial_and_Scientific_5 POS 5.0 good screws, I use them a lot.
It performs all nominal tasks, thru a slightly different user interface.
856 Industrial_and_Scientific_5 POS 5.0 Works great!!
9674 Industrial_and_Scientific_5 POS 5.0 Good Job
1545 Industrial_and_Scientific_5 POS 5.0 Great for gaps around and under doors and under floor molding to prevent drafts.
When did bottle design become rocket science? Shape is not arbitrary!
1016 Industrial_and_Scientific_5 POS 5.0 They work as they're intended.
1830 Industrial_and_Scientific_5 POS 5.0 For Kreg pocket holes, nothing works better than Kreg's own screws. Beefy head, and strong gripping threads. Great for plywood. Amazon had the best price I could find.
5273 Industrial_and_Scientific_5 POS 5.0 Have used this for years on all sorts of stuff, leather, shoes, even repair rips in nylon jackets. It can be washed and stays bonded and flexible. Just sealed an orange tape signal light repair on the unsecured edge
4718 Industrial_and_Scientific_5 NEG 1.0 made a sticky mess
6460 Industrial_and_Scientific_5 POS 5.0 Works very well!
861 Industrial_and_Scientific_5 POS 5.0 Works awesome in my air die grinder. They don't last long, but they work awesome. They just eat right through the rust like it was nothing. I'm never using the screw driver type brushes again.
4314 Industrial_and_Scientific_5 NEG 1.0 Defective door mechanism. This is a known problem with this unit. Buyer beware.
2714 Industrial_and_Scientific_5 POS 4.0 Always a great product...
5032 Industrial_and_Scientific_5 POS 4.0 good tooling. lasts and cuts great
314 Industrial_and_Scientific_5 POS 5.0 Worked great, nice having bigger vac attachments
The plastic feels a little thin but for the price, wasn't expecting more.
5571 Industrial_and_Scientific_5 POS 5.0 Cheap, do fine
454 Industrial_and_Scientific_5 POS 5.0 It took a bit before I did all the pieces right side up and not backwards, but once I did I was very happy with them/
2348 Industrial_and_Scientific_5 POS 5.0 Yes, it is as good as everyone says. I tried the Lee stuff, and making my own. This stuff is *much* better.
9991 Industrial_and_Scientific_5 POS 5.0 Excellent seller, and excellent product.
2195 Industrial_and_Scientific_5 POS 5.0 I use these for small hobby craft projects. The alignment of the tips and the locking mechanism are very good.
4892 Industrial_and_Scientific_5 POS 4.0 Works great for sealing holes where cables enter a building. My only complain is how sticky it leaves your fingers after working with it (bring a rag or paper towels up the ladder with you), but it does it's intended job very well.
88 Industrial_and_Scientific_5 POS 5.0 it work so well
7229 Industrial_and_Scientific_5 POS 5.0 Item is exactly as listed
7371 Industrial_and_Scientific_5 POS 5.0 for those hard to reach areas it is a must, don't use this stuff often but the last bottle i had which ive had for 5 years was running low so it was due.
3039 Industrial_and_Scientific_5 POS 5.0 Works great!
5595 Industrial_and_Scientific_5 POS 5.0 fits just fine into my old Oreck vacuum
3823 Industrial_and_Scientific_5 POS 5.0 I use JB Weld for metal and it worked so well I decided to try and fix my center console lid where the screws go into a plastic threaded nub. It has held up now for over 2 years saving me at least $100. I have used it for many other plastic mends and it has worked better then other types of epoxy.
Don't put it off...just GET ONE. Life's too short to work harder than you have to.
3385 Industrial_and_Scientific_5 POS 5.0 As advertised.
5467 Industrial_and_Scientific_5 POS 5.0 Excellent!
257 Industrial_and_Scientific_5 POS 5.0 Just make sure you have a lot more than you need.
7936 Industrial_and_Scientific_5 POS 5.0 This was just incredible. I use it to hang a windsock in the back yard. Does great.
2025 Industrial_and_Scientific_5 POS 5.0 They work with my Fluke 116. They do not however fit into the recesses on the back of the yellow "case" like the ones that came with the meter do.
8320 Industrial_and_Scientific_5 POS 5.0 Good piece of aluminum
1983 Industrial_and_Scientific_5 POS 5.0 works perfect.
1418 Industrial_and_Scientific_5 POS 4.0 Slightly warped on receipt. Tape doesn't flow off real easily.
8535 Industrial_and_Scientific_5 POS 5.0 smaller in size than I thought they would be, but they do their job.
4932 Industrial_and_Scientific_5 POS 5.0 product OK
5700 Industrial_and_Scientific_5 POS 5.0 Great product
4898 Industrial_and_Scientific_5 POS 4.0 Fast Shipping, great price, works great.
EDIT 9-8-2014:
1176 Industrial_and_Scientific_5 POS 5.0 so far so good, working well.
I can't stress this enough:
Update: I have had this almost a year (I use it in the woodshop for accurate measurements) and am happy with it. I still think a Starrett is much better, but for the price and the use I am very happy and would buy it again, but it still feels like new so I probably won't need to for a long time.
6502 Industrial_and_Scientific_5 POS 5.0 Works exactly as it should. Auto turn on when you move it. Comes with a case and spare battery. Reads in metric, ASE, and fractions. Piece of cake to use and read.
1313 Industrial_and_Scientific_5 POS 5.0 At first I was disappointed at first as the adhesive didn't stick at all on one side of the shade material I was sticking it to even after I had cleaned everything with rubbing alcohol.
5334 Industrial_and_Scientific_5 POS 5.0 Just the best sealant for anything outside. I use it seal all my electrical connections for auto and trailer. Never a problem.
8527 Industrial_and_Scientific_5 POS 5.0 Very durable and is holding up well. I like the flexibility of this for any project that requires it as well., The price and delivery was very good so would highly recommend.
4068 Industrial_and_Scientific_5 POS 4.0 "Gorilla Glue" has become one of the most used "tools" in our house. We have used it to repair wooden chairs, fix a wooden medicine chest, glue soles back on to sneekers, fill cracks in a wall, and at least half a dozen other fixes in the past month.
6605 Industrial_and_Scientific_5 POS 5.0 Best stuff i have found
662 Industrial_and_Scientific_5 POS 5.0 Cant go wrong with 3M product
9476 Industrial_and_Scientific_5 POS 4.0 Standard pegboard hooks but they have the secondary insert to keep them in place. Do not need the plastic keepers to keep them on the board.
6604 Industrial_and_Scientific_5 POS 5.0 It works great.
5134 Industrial_and_Scientific_5 POS 5.0 Ok
* It expands a *LOT*, use with caution or you might accidently glue your project to the table as it expands overnight! This happend to me :-)
2625 Industrial_and_Scientific_5 POS 5.0 This is light and folds to small enough size that will fit in our vehicles compared to other models. Can carry lots of items and rolls very smooth. We have use it in snow where others would get stuck. I'm sure if enough snow was around, it probably get stuck, but so far so good. Best investment we have made when we go to trade shows.
It is a standard silicone-clear, which is like a translucent clear.
7806 Industrial_and_Scientific_5 POS 5.0 This was just incredible. I use it to hang a windsock in the back yard. Does great.
The process. I lifted up one side of the toilet to inspect wood damage and condition. The rot was in the past and little moisture was present so the leak may have been partly condensation gone wild. Good news. Gorilla Glue activates with moisture. Didn't know that, so the conditions here are perfect. What the glue was now to do is to bond with the bad wood becoming super strong, water resistant, and hard as stone. it will make a bridge so to speak with the bad wood and the good wood, and Gorilla will bond with porcelain like grout does but stronger bond.
- be discrete
3444 Industrial_and_Scientific_5 POS 5.0 Works exactly as described.
2489 Industrial_and_Scientific_5 POS 5.0 Excellent. It has survived several drops so far. A bit complicated with all the memories (99 of them, come on) and various functions, but the basics do work great. Will buy more.
8980 Industrial_and_Scientific_5 POS 4.0 USED THESE TO MOUNT MY LED FOG LITZ TO REAR OF VEHICLE AS BACK UP LIGHTS. ALLOWS ME TO MOVE MY LIGHTS TO THE INTERIOR OF VEHICLE OR TO THE SIDE IF I NEED TO CHANGE A TIRE. VERY STRONG. I PUT PACKING TAPE OVER THE MAGNET TO PROTECT THE PAINT ON MY JEEP. THE ONLY HARD PART IS PUTTING A NUT AND BOLT THROUGH THE MAGNET. IT CAN BE DONE BUT IT WILL TRY YOUR PATIENCE.
1618 Industrial_and_Scientific_5 POS 4.0 Need instructions to fine tune the slide action. Very heavy duty and did the job I intended it for. Could not orient the vise to drill adequately. But not sure if it was my drill press, the vise of me that could not get the right position.
General Principles: Although JB WELD makes an excellent filler---and can even be used to cast small parts, it is not remotely as strong as real metal used this way. Whenever possible, use JB WELD as an adhesive---a very thin layer of JB WELD holding two pieces of metal together. Always reinforce with metal pieces when possible. For example, rather than building up a massive flange with JB Weld, you might be able to use scrap peice of metal to form most of the flange, held in place with JB Weld. The greater the relative surface area of contact, the strong the bond will be.
7793 Industrial_and_Scientific_5 POS 5.0 Outstanding rod, well made with fantastic ultra heavy duty cardboard tube shipping.
If you would like to see more images of bits, test cuts, and so on, please see my review of the Irwin 10225 Unibit set.
2376 Industrial_and_Scientific_5 POS 5.0 I have a German Shepherd who sheds enough hair to build her own dog every week. I had gotten used to having hair everywhere, all the time. Thought it was inescapable, until now! I got this vacuum and I can whip in out in seconds and have the downstairs ship shape in no time. It is powerful and lightweight, which I need. It's small enough to stick easily in a closet or corner without being in the way. The power cord wraps easily without any bending, which can cause me great pain. Emptying the cup is easy, too. I couldn't believe how much dirt it picked up!
FOllowed instructions, silicone lasted a few month before water was getting trapped underneath it and mold started popping up. Going a different route now that i have to redo it once again.
8500 Industrial_and_Scientific_5 POS 5.0 well made
1015 Industrial_and_Scientific_5 POS 5.0 great
6346 Industrial_and_Scientific_5 POS 5.0 It works great. I now own two of this model. The first one is still going strong. I measure to 1/1000 of an inch, and these give me an accurate readout. The only reason I would buy a different one would be if I could find one with a detachable screen. At times, it is hard for me to read the numbers when the calipers are applied. That's no fault of the calipers.
---------------------------------
5522 Industrial_and_Scientific_5 POS 5.0 I used this switch to repair my old floor lamp. The lamp has a large center light on a secondary switch and 3 smaller lights that look like candles cntrolled by this switch.
-One weld on a basket track was broken. Welds could be stronger. Too bad Amazon Warehouse Deals unloaded this on me with the broken part. Even Goodwill doesn't sell stuff that's unusable. I velcroed the legs tightly until Seville whipped out another track to me in two business days.
9356 Industrial_and_Scientific_5 POS 5.0 I always like having this on hand "just in case". I have used this for years.
6253 Industrial_and_Scientific_5 POS 5.0 I've been shocked a number of times from touching a wire or switch that I thought was not live. Not only is it painful it can be a deadly mistake.
6310 Industrial_and_Scientific_5 POS 5.0 Handy.
4299 Industrial_and_Scientific_5 POS 5.0 ORDERED THIS PRODUCT JUNE 7, 2010. ON MAY 13, 2010 I HAD ORDERED THE SAME PRODUCT, SAME MODEL NUMBER, FROM SAME VENDOR. THE MOUNTING ASSEMBLIES WERE TOTALLY DIFFERENT. THIS WAS NO BIG DEAL, I WAS TOTALLY SURPRISED AT THE DIFFERENCE 2 WEEKS MAKES. THE PRODUCT WAS IN PERFECT SHAPE IN BOTH SHIPMENTS. I HAVE NO COMPLAINT. JUST THOUGHT IT WAS INTERESTING.
4858 Industrial_and_Scientific_5 POS 5.0 good product quick delivery
2088 Industrial_and_Scientific_5 POS 5.0 Let's see...
1149 Industrial_and_Scientific_5 POS 5.0 This may not be any faster than rocker with years of experience using a hand full of screws and a regular gun, but for anyone else, it's a heck of a lot easier. True there a some areas that are hard to get into, like corners, but if you have a straight line you can really fly.
(13) Dryer (Clothes)
I always wear good eye protection when cutting with my grinder, as dust and bits of rock will really fly around!
7357 Industrial_and_Scientific_5 POS 4.0 Good stuff.
89 Industrial_and_Scientific_5 POS 5.0 They are staples...They work... Extra strong... Think staple size of a construction hammer tacker (not an exaggeration, actually that size)....
1567 Industrial_and_Scientific_5 POS 5.0 Really good product. Expensive. But works.
and bonds very well to most surfaces & sticks to itself really well.
4132 Industrial_and_Scientific_5 POS 5.0 No tools of any kind are required to assemble this bench. Nice quality! Mine was received in perfect shape. It is almost to pretty yo use as a shop bench. Very solid construction when it is assembled.
2143 Industrial_and_Scientific_5 POS 5.0 great for reaching into a reef tank to move things around. Keeps the hands out of the tank.
2153 Industrial_and_Scientific_5 POS 5.0 this is just what I needed, perfect
3kHz-30kHz VLF
6205 Industrial_and_Scientific_5 POS 5.0 Feels like a proper tool in the hand, and works brilliantly. You can tell which side of a piece of zip cord is live with this, and it passes the crowded box test. I bought a cheaper one a few years ago and it tried to kill me a few times. I threw that away and bought a RELIABLE tool in the Fluke.
4807 Industrial_and_Scientific_5 POS 5.0 Great screws at a great price. Thank you!
Better value than their upright models.
110 Industrial_and_Scientific_5 POS 5.0 as expected
7639 Industrial_and_Scientific_5 POS 5.0 Too many things I have used Velcro for to list here. But, lately I used to hang my panel drapes, hang thermometer in chicken coop and on cabinets doors to keep close when not in use.
775 Industrial_and_Scientific_5 POS 5.0 Made well may past experience using this product it's still working three years later under consist use that's the reason I purchased another one it's dependable a must buy
136 Industrial_and_Scientific_5 POS 5.0 Fits good, tough.
7199 Industrial_and_Scientific_5 POS 5.0 Used in an under counter hot water dispensing application that does not place line pressure on the tubing... This product holds up to the near boiling temperature that caused polyethylene tubing to crack and leak after a few months.
5581 Industrial_and_Scientific_5 POS 4.0 Great
Highly recommended!
2511 Industrial_and_Scientific_5 POS 5.0 Like them...this one will be a back-up.
So glad I got it! Awesome! Thanks, Hoover!
Smooth cutting step drills - like this Irwin bit - cuts plastic sheet much better than regular bits, especially as hole sizes increase. I found it easy to produce clean edged, accurate holes with the Irwin step bits in my handheld drill. Trying to use standard bits often made a mess of things, unless the holes where small (say less than 1/4 diameter).
2351 Industrial_and_Scientific_5 POS 5.0 I tried this on some pistol cartridges and it did make a difference in how they cycle through the press although, with the right dies I'm not sure it's worth the extra step. For rifle cartridges (which I don't reload) I think it's a lot more useful. Hornady makes good stuff. Some of it is a bit pricey but I've never been disappointed with any of their products. Don't expect one of those big jumbo cans if you buy this, it is a small can. I'm guess it's about 1.5" - 2" diameter and maybe 6" - 7" tall.
Taking care of your scope
1451 Industrial_and_Scientific_5 POS 5.0 I mail out alot of packages and use alot of packaging tape. And sometimes I have fights with the tape -- it is either too thin, it sticks to itself when I unroll it, it has a mind of its own and wrinkles just as I am about to tape up the package, and if I should forget to create a little "tape tab" so I can easily unwind it from the roll the next time, I engage in the "battle of the tape" where I pick at it until I find a starting point, only to unravel pieces of the tape in an endless spiral -- what a waste of tape and money, eh?
6893 Industrial_and_Scientific_5 POS 5.0 I do a lot of repairing wiring around the house. Using electrical tape is messy and tends to peel off, even if you cut it properly. These really come in handy and shrink in a snap. This box has many different sizes and colors. You can also cut them to size. A single box can last you a long time. Plus the price is right!
862 Industrial_and_Scientific_5 POS 5.0 Good quality wire wheel works excellent on my air operated angle die grinder for cleaning up metal surfaces whether it be gasket material or rusty metal I use it on many projects. I would buy this product again.
7385 Industrial_and_Scientific_5 POS 5.0 Bottle leaked a bit during shipping but the liquid tape seems to work as intended.
5 stars! There are other good scopes out there, but I think this will be serving me well for a long time to come.
6428 Industrial_and_Scientific_5 POS 5.0 Great price for a high quality product! Shipping was quick and this thing is solid. Glad I bought it, one of those tools I probably won't use much but is nice to have when you need it.
3168 Industrial_and_Scientific_5 POS 5.0 Worked great and with cap on tight can be reused. It took a long time to use it all up. It was super handy and I will get some more
5987 Industrial_and_Scientific_5 POS 5.0 I was a little concerned it wouldn't work, but ordered it anyway as it was just a few bucks. Using to fill saw cuts in my patio before I fill them with self leveling concrete filler. The cuts are only 1/8" and this squishes down in there just fine. Get it started with the fingers and finish it with a flat head screwdriver. (I hope no one takes that last sentence out off context)
2606 Industrial_and_Scientific_5 POS 5.0 For those of us who have no soldering experience and just can't seem to ever get those butt connectors crimped to hold, this is a fantastic alternative. Just place your two wires inside and squeeze down the metal clip which cut through the insulation making contact with both wires to complete the connection, then close cap. Available in three sizes.
I also like that it folds up into a reasonably small and easy-to-store form.
7425 Industrial_and_Scientific_5 NEG 2.0 Looks good for the costume but do not expect to hear anything through it. You can hear better if you put your ear up to the person's chest.
6980 Industrial_and_Scientific_5 POS 5.0 Used to pump hot water ( up to 180*F) for Sous Vide cooking. Wanted a strong heat resistant tube, this fits the bill. Went to 1/8" wall thickness fo avoid potential leaks. Case as 1-10' piece.
2860 Industrial_and_Scientific_5 NEG 1.0 What I received was NOT what is pictured, not even close. The product picture clearly shows a thumb wheel adjuster. There's no thumb wheel on what I got. As if that wasn't bad enough I cannot believe what I received is a Brown&Sharpe. Talk about being cheaply made. I have an older Brown and Sharpe and I bought this because sometimes I need to have two calipers on hand and wanted a quality instrument. well I guess I'll have to look elsewhere. I am sending this POS back! For those out there who are content with second/third rate calipers and enjoy name calling GOOD for you I am glad you are happy with an inferior product and receiving something you didn't order. I saw a thumb wheel in the pictured product description so I want what is shown not a cheaper substitute the seller decides to send instead. I also own an older pair of B&S calipers that are first rate. These newer ones are a mere shadow when compared with the older ones. In fact a pair of RCBS China made that I also own is a cut above. So go ahead and be a cheerleader for junk. Buy a hundred pairs of these new B&S. You will need them. What I said is 100% true, ignore my advice at your own risk!
4830 Industrial_and_Scientific_5 POS 5.0 Nice tape, sticks good
As is, I was pretty satisfied with these. I used a 1/4" hex socket adapter in my drill which made for easy driving, but they would work fine with a #2 Phillips bit too.
9631 Industrial_and_Scientific_5 POS 4.0 It's big and the latching lid mech, keeps dust in--that's the good, the bad is that is awkwardly big, I bought it to use as the debris collector for a Clear Vue mini cyclone, and it just to big--my bad for not checking the physical dimensions more carefully, also the 'handles' such as they are, catch a ton of dust etc since they are simply molded in recesses. It is made of super tough materials and works well though, just be sure you really need this size.
7166 Industrial_and_Scientific_5 POS 5.0 works well, connecting my hot liquor tank to my Mash lauter tun. I got this because I thought it would lose less heat while transferring the water. it does exactly as I expected. insulates itself better than thinner silicone and vinyl tubing.
4346 Industrial_and_Scientific_5 NEG 1.0 This oven worked very well for two years, until it failed, showing an H98 code on the screen. It no longer heats. Not sure if I'll ever purchase a microwave with the inverter technology again , since this one didn't last but two years. According to Panasonic, there are no parts available, even if I wanted to have it repaired. Sorry Panasonic, you just lost my business.
If you like the zoom aspect of your Maglite, and find it a valuable feature, I would skip this modification. If you want to increase the brightness and battery life this should do it.
3998 Industrial_and_Scientific_5 POS 5.0 I don't have the time to write down all of the uses that this product can handle. I know that it works for what I want it to do. The down side is that it take 24 hours to fully cure. Get some! You will love it. This price was cheaper than I could buy it locally at the Ace Hwr store
574 Industrial_and_Scientific_5 POS 5.0 Great
6198 Industrial_and_Scientific_5 POS 5.0 good for all small radio/ audio wire installation I will buy more and the future kit good quality and price
9412 Industrial_and_Scientific_5 POS 4.0 as described
7280 Industrial_and_Scientific_5 POS 5.0 As expected and delivered on time.
3945 Industrial_and_Scientific_5 POS 5.0 This is super glue. The price has come down of it since years ago but there is a way o buy it even cheaper. Find these deals like this on the two ounce bottle or larger and transfer it into smaller squeeze bottles (like I buy for cheap on ebay)
Pure Clean PCSHPT14 - Portable Handheld Travel...
Expansion can strengthen bonds by filling voids
9482 Industrial_and_Scientific_5 POS 4.0 These were OK. I wish they had more heavier guage parts int he kit but these will do for now.
1837 Industrial_and_Scientific_5 POS 5.0 Good product! Works as required. Arrived on time.
2514 Industrial_and_Scientific_5 POS 5.0 While I was out shopping in a local store, I spotted this Spinbrush with medium bristles. At the time, I did not realize that it was a medium bristle until I went home and opened the package. However, since I was coming from soft or very soft bristles, I decided to brush my teeth more gently and let this toothbrush do all of the work. It does have a rather large toothbrush head, yet this is good because it cleans all areas of all of my teeth, even those hard to reach places in the back!
6276 Industrial_and_Scientific_5 POS 4.0 This tester gives constant visual signal that device is working. This is a significant improvement. Four stars because I can't grade dependability at this time but I'm hopeful that Fluke will perform better than others.
4960 Industrial_and_Scientific_5 NEG 2.0 SO far so good. Dries fast and not sure if this is any different from other silicone.
6652 Industrial_and_Scientific_5 POS 5.0 Outstanding stethoscope. I have been an EMT-Intermediate for three years and this is the first "expensive" scope I have bought. Wish I would have bought this a long time ago. Very happy with the purchase.
6348 Industrial_and_Scientific_5 POS 4.0 My old Mitutoyo calipers were stolen a few years ago, and I wasn't going to drop another $150 for a new set. These Neiko are decent enough, seem to be accurate when measuring known sizes, and were well worth the price. They are a bit stiff out of the box, but were adjustable in tension, and they loosened up after a few days of use.
Because cell phones and microwaves are in a much higher frequency range, this product does not measure EMF (RF) at those frequencies. You would want a separate meter for that.
superb price
Before getting this caliper, I used to take measures with a plastic measuring tape, not I finally have precise measures :D
- For something described as "unpolished", the finish looks really nice to me! I was expecting that I'd need to work on the finish before using it in my project, but it looks great as-is! So, I'm quite happy with the item ;)
5094 Industrial_and_Scientific_5 POS 5.0 Used these on the front hubs for my 01 Excursion 4x4 vacuum system. They fit perfectly and allow the use of the stock size vacuum tubing.
Silicon Glue: Silicon glue is best for glass, and when you want a truly flexible connection (for example, to absorb vibrations). It is a better choice for general household use on glass, plastic, and metal when you do not need the maximum possible strength. It is safer than Goop, and cleanup is easier. Like Goop, silicon glue takes days to reach reasonable strength, weeks to reach maximum strength. For example: GE Silicone II Household Glue, 2.8 oz
8206 Industrial_and_Scientific_5 POS 5.0 Good product.
On review claimed that these bits cut in two directions. To test this I tried making holes in hardwood by running my drill in reverse. It worked poorly, cutting action much slower and the quality of the hole was not as good as running the bit in a normal (clockwise) direction.
5514 Industrial_and_Scientific_5 POS 5.0 Great terminals.
The stuff just works, obviously not for everything. You need to be reasonable with your expectations. Follow the instructions and you can get some pretty amazing results. I use it frequently. Of course I am a klutz. I break things all the time. lol
I live in a coastal region subject to storms and I store gas for a small generator to run refrigerators and such. These cans really stop the evaporation and keep gas as fresh as it can be. It is also very easy to use as the handle is made in a manner that you can use one hand to pull the spring-connected lid back with.
3083 Industrial_and_Scientific_5 POS 5.0 works just as well as my hanna does
6113 Industrial_and_Scientific_5 POS 5.0 I used a bunch of these (along with the double cable version of the same thing) on a recent install where I ran a bunch of coax and CAT 6 cabling and they worked out great.
8249 Industrial_and_Scientific_5 POS 5.0 OK
1954 Industrial_and_Scientific_5 POS 5.0 Nice high quality tape for all of our projects. I use it as well as my husband and would not hesitate to buy it again.
9328 Industrial_and_Scientific_5 NEG 2.0 there is only one type of 5/16. pretty much useless.
5839 Industrial_and_Scientific_5 POS 5.0 real strong duck tape. not the cheap stuff you find at the dollar store.
1613 Industrial_and_Scientific_5 POS 4.0 This vice as shipped is different than the one shown on the web site as the method of attaching the upper cross slide screw is changed. Not a big deal, but not what I was expecting. The vice itself is serviceable, with a fairly smooth action and not very much back lash. The base is not tall enough for the lower cross slide handle to clear, so it must be mounted up on another sub-base to function, which was easily done, but inconvenient. Still, it's a pretty good value considering the price.
576 Industrial_and_Scientific_5 POS 5.0 great stuff
What more could you want.
I just removed the old belt and installed the new. If anyone has the same application, the old belt is a standard non-grooved V-belt. Like all things imported, the belt was probably low quality to begin with, but it lasted about 3 years of every-day use. Yes, every-day use, maybe minus a weekend here and there. I just got this belt so it's hard to tell if this belt will last over 3 years... maybe 5 (?), or not. We'll have to see.
Will be buying again as my skills improve.
5131 Industrial_and_Scientific_5 POS 5.0 as advertised
9459 Industrial_and_Scientific_5 NEG 2.0 Junk, do not waste your money
3421 Industrial_and_Scientific_5 POS 5.0 Exceed expectations
5036 Industrial_and_Scientific_5 POS 5.0 I used this to connect the pump head of my air compressor to my air holding tank using nice 1/2" flare connections rather than the 1/4" rubber gasket/compression fitting travesty it came with from the factory. Has worked perfectly with no leaks for over a week now!
8187 Industrial_and_Scientific_5 POS 5.0 Nice thing about aluminum stock, it is light for a metal, so shipping it doesn't seem so dumb. I liked these guys they shipped quickly and the price was good.
949 Industrial_and_Scientific_5 POS 5.0 This can be used on a ton of projects!! Where has this been all my life? Great product
5059 Industrial_and_Scientific_5 POS 5.0 quality fitting.
6231 Industrial_and_Scientific_5 POS 5.0 nice
4652 Industrial_and_Scientific_5 POS 5.0 Quality washers and great price for quantity. All of the Hillman stainless washers purchased have high quality.
543 Industrial_and_Scientific_5 POS 4.0 Works well. Handle could be a bit longer.
7925 Industrial_and_Scientific_5 POS 5.0 Just what I needed.
Note that you need a different crimping tool for these than the one you'll use for copper-ring connectors. I ended up buying both crimping tools just so I'll always have them handy on jobs.
The Achilles Heal of this instrument is that the design is HIGHLY INACCURATE for LOWER EMF readings. The accuracy is not 4% of the displayed value (+ 3 digits) but rather THE ACCURACY IS % OF THE VALUE OF THE END OF THE MEASUREMENT RANGE (4%x200mG = +/-8mg (+ 3 digits). Since the vast majority of the consumer use of EMF checking is in the single and low teens mG, this is unfortunate.
8957 Industrial_and_Scientific_5 POS 5.0 it works better than expected
6743 Industrial_and_Scientific_5 POS 5.0 works great
7618 Industrial_and_Scientific_5 POS 5.0 pleased with service and product
I am happy to recommend this if you need copper rods for projects, crafting, or metal working.
The one question not answered in the manual is what happens if you place a casserole dish, for example, inside that's too large to rotate, what will happen? There's no obvious way to shut off the carousel.
5660 Industrial_and_Scientific_5 POS 5.0 no more squeaks
2398 Industrial_and_Scientific_5 POS 4.0 Once you get the hang of it this product can provide ease of transport for heavy objects
I put it on my dogs water dish.
5158 Industrial_and_Scientific_5 POS 5.0 See my review of the other size of staples. It is also true of these. They were satisfactory in completing the craft projects.
9518 Industrial_and_Scientific_5 POS 4.0 I ordered four of these 12-inch dollies to do the laminate flooring on my house with minimal work. I moved a 600 lbs weight-lifting machine over carpet, a king-size bed with a wrought iron frame, a huge dresser, and more. To get the furniture into the dollies I used a scissor jack, a 4' pry bar, and some wood blocks. I don't give 5 stars because of the huge stickers that the manufacturer pasted all over my four dollies -- it took me some patience with a heat gun and WD-40 to make the dollies look as in the picture.
2991 Industrial_and_Scientific_5 POS 5.0 works great on molding. both natural and mfg. wood products will stand no chance to these pushing through and holding strong. Great packing.
5015 Industrial_and_Scientific_5 POS 5.0 Fit and finish exactly what I needed.
2581 Industrial_and_Scientific_5 POS 5.0 Used to seal some connection to make it waterproof. Also usedon shoe. Great so far. Just read the curing time as it takes some time.
3758 Industrial_and_Scientific_5 POS 5.0 Ordered two one for home and one for traveling repair kit.
7161 Industrial_and_Scientific_5 POS 5.0 Good quality soft silicone tubing. Works great for hot beer transfer in my brewery application.
4006 Industrial_and_Scientific_5 POS 4.0 It's clear, and it stays clear, but when I used it on a gray plastic table, exposed under the sun, it turned "yellow". . I used the expozy to harden my fishing lures so they last longer, fishing lures are crank baits.
Those complaining about the quality of this tool are no doubt, greedy tightwads who expect STARRETT quality form something priced really low.
4313 Industrial_and_Scientific_5 POS 4.0 It's litmus paper. What can you say about it? I got it to test my well water. Works like it's supposed to.
6513 Industrial_and_Scientific_5 POS 5.0 very handy
580 Industrial_and_Scientific_5 POS 5.0 Love this tape. By far gets the best wrap around my connections. The only down side is it dries out after a few years of being on
4744 Industrial_and_Scientific_5 POS 5.0 More screwy screws to add to my screwing screw collection of screws to screw with
Yes, you can "get it to fit", but you really have to crank down on the clamp! You've 5/8" of a gap you have to close and that's a lot! In the first photo I've laid the connector onto the gate. You can see that gap. In the second photo you can see that I've cranked it down. My screw gun was not up to the task on the highest torque setting! I had to switch to screw mode and let me tell you ... this clamp is a blink of an eye away from failing.
6913 Industrial_and_Scientific_5 POS 4.0 I've used heat shrink for many years and this stuff works just as good as the other stuff I've used. This kit is so handy by having the sizes sorted out in a plastic box instead of just mixed-up by the assortment just being thrown into a plastic bag.
8333 Industrial_and_Scientific_5 POS 5.0 I purchased this Aluminum 6061-T6 Seamless Round Tubing, WW-T 700/6, 3/4" OD, 0.68" ID, 0.035" Wall, 36" Length as an Axyl surround for a Kayak Mobility Cart build I am working on. It is a great little 36" piece of Aluminum Pipe for this or other uses I may find for it. With a little effort, you can easily cut it to size or even glue it up with epoxy for use in many ways, that only you can come up with. If you need a good aluminum, about anything you may need, Small Parts or Online Metals can get it for you. I love it.
1856 Industrial_and_Scientific_5 POS 4.0 Good product, good price.
6415 Industrial_and_Scientific_5 POS 4.0 Great
8150 Industrial_and_Scientific_5 POS 5.0 good quality quick ship
1018 Industrial_and_Scientific_5 POS 5.0 [Sold by: Amazon.com LLC] Nice selection to use with my new Senco FinishPro 18MG. Tried out a couple different sizes and had no problems. No project in the works so I am unable to tell how reliable/repeatable they are.
3093 Industrial_and_Scientific_5 POS 5.0 So far seems to be working great. After some searching this seems to be one of the best for the price. A couple of concerns, the button can be activated accidentally if put in pocket or a case. A ridge around the button would be helpful.
i like the product and will be back for more
5231 Industrial_and_Scientific_5 POS 5.0 Fit perfect & cheaper then H.Depot
Step Height (i.e. max material thickness): 1/8
7079 Industrial_and_Scientific_5 POS 5.0 I bought this to creat either a sculpture that includes stained glass, or for jewelry. It is very sturdy, has a nice shine too. Overall it is a very good buy. I would recommend this to family and friends.
4670 Industrial_and_Scientific_5 POS 5.0 Good stuff. Used to mount a siren box under my dash panel. Has held up thus far through summer heat and winter cold.
7851 Industrial_and_Scientific_5 POS 5.0 Exactly what I needed! Product is high quality and all the dimensions are dead on and machines beautifully!
9850 Industrial_and_Scientific_5 POS 5.0 Works
I have had it shrink quite a bit and I deducted one star for that issue. It just makes me seal some larger areas more than once.
4769 Industrial_and_Scientific_5 POS 5.0 Love love love my kreg stuff!
3526 Industrial_and_Scientific_5 POS 4.0 I am a physical therapy student. This steth and cuff have served me well and are more than adequate for school. I hear much better with this steth than with the ones the school has. The earpieces are more comfortable too! The BP cuff is fine but the way you hold the bulb can be a bit finicky. Also the way the valve for the bulb on the cuff locks down makes for some resistance to be overcome so you have to be careful not to let out too much air as you open the valve. This is learnable and not a big deal but something to consider in your purchase.. I am still able to take accurate manual BP and HR measures while walking with a patient in a hallway, so it works just fine.
One thing I would note is that the sticky residue doesn't seem to be as bad as with duct tape.
3544 Industrial_and_Scientific_5 POS 5.0 these are water tight and work good. plus they stack on each other when using the proper lids. they nest inside each other when not using the lids
9463 Industrial_and_Scientific_5 POS 4.0 Great assortment for organizing my basement.
9981 Industrial_and_Scientific_5 POS 5.0 YES ITS AMERICAN MADE craftsmanship 5 stars fit and finish 5 star also sharp and heat treated properly. but you still need to use thread lubricant or it will not last as long as possible
5433 Industrial_and_Scientific_5 POS 5.0 Easy to use and reliable tool
6519 Industrial_and_Scientific_5 POS 5.0 price is good received on time.
Update
4471 Industrial_and_Scientific_5 POS 4.0 Did the job and has a variety of pieces to choose from.
1174 Industrial_and_Scientific_5 POS 5.0 easy to use
7766 Industrial_and_Scientific_5 POS 5.0 Diameter is right on size but when you remove rough surface it is undersized. Have to order 1/8" larger diameter to make the difference.
1749 Industrial_and_Scientific_5 NEG 1.0 First off, only one comes with this page, even though it says, "2-pack" with the little Amazon smile under it, so don't get your hopes up. I though I was getting a good deal and ended up paying twice as much as it's worth.
Here are some sample readings of LOW frequency AC MAGNETIC field EMF (Note: not electric field):
7286 Industrial_and_Scientific_5 NEG 1.0 Way to thick and useless for small connections viscosity to thick
Also note that pulsed EMF is usually not read accurately by EMF meters.
Use step bits to quickly measure the diameter of existing holes. Just insert the bit until its snug and read the diameter from the it. Of course the step drill needs to have high quality markings for this to be practical.
7643 Industrial_and_Scientific_5 POS 5.0 I had one of these a long time ago and lost it when I loaned it out to a buddy who never brought it back. Just bought a new to me used vehicle and have been working on it to repair some of the small faults that come with an older vehicle. I found myself needing to see where I could not see conventionally so I bought this. It has helped me three times already make repairs in tight places. Glad I bought it.
ABS is used abundantly for automotive interior cosmetics, as well as some exterior items such as bumpers.
8319 Industrial_and_Scientific_5 POS 5.0 Just as described. Fast shipping. Worked great.
9168 Industrial_and_Scientific_5 POS 5.0 These are great! No wrestling wires together!
8020 Industrial_and_Scientific_5 POS 5.0 The correct size arrived and it was a steel rod. Not much else to review.
SAMPLE EMF MEASUREMENTS:
6949 Industrial_and_Scientific_5 POS 4.0 good product
As a retired machinist, we would never consider shipping threaded brass without some form of protection but it would likely increase the cost of the item, Im sure.
Thank you.
Here are my observations:
With the good experience I have had, I can easily recommend these as a good buy!
7621 Industrial_and_Scientific_5 POS 5.0 Something you need for in your car, at work, and at home. Perfect size with cap making it reusable without drying out.
6448 Industrial_and_Scientific_5 POS 5.0 These are actually better than the calipers I am furnished on the job (which are "calibrated" by the quality department). They automatically turn on and off by themselves so its impossible to run the battery down, the screen is great quality and reads in 0.01 mm, 0.0005 inch, and up to 1/128 fractal inch
184 Industrial_and_Scientific_5 NEG 1.0 I have used this brand for years, but this time when I ordered two CLEAR, I recieved two WHITE, it says clear on the tube but they are very white. very disappointing, I am using it to glaze cabinet glass, white will not work.
130 Industrial_and_Scientific_5 POS 5.0 Useful
An 800-pound Gorilla can sit anywhere he wants to in my house.
1354 Industrial_and_Scientific_5 POS 5.0 This belt replaces one that was damaged when a zinc pot-metal motor sheave split and chewed it up in less than a minute of operation. With a new cast-iron sheave installed, this belt should last a long time.
930 Industrial_and_Scientific_5 POS 5.0 Perfect for securing 2 x 4's. Grip well.
- WiFi (802.11) = 2.45GHz or 5GHz
- Reading meter from 5 feet away.
SPECTRUM ANALYZERS. To measure EMF/RF field strengths AT DIFFERENT FREQUENCIES you will need a spectrum analyzer. Some consultants use these for higher-end analyses, however there is usually much more expense and skill involved clearly. Below is the maker of an affordable hand held spectrum analyzer solution you may wish to read up on..
5632 Industrial_and_Scientific_5 POS 5.0 This is the greatest tape-it lets the skin breath while holding a gauze bandage. As advertised, fast delivery, great product. It is easy to get the backing off so it can be conveniently used
6298 Industrial_and_Scientific_5 POS 5.0 Item arrived in a timely manner and was as described.
Thanks
I like the right-most one, which has long steps -- it helps get nice straight holes, even through a fairly thick piece of fiberglass. The only minor thing is that I wish that there was more variety in sizes. The bigger one is, if I recall correctly, 3/4" at the largest. If the set had a narrow, medium, large one, it would be slightly more versatile, than the current set which has 2 narrow ones, and a medium one.
1453 Industrial_and_Scientific_5 POS 5.0 This Scotch product is perfect for sealing packages. It is very strong and sticks very well. I have used it to seal packages for mailing and items I've boxed up at home. Being clear is a great advantage. I use it to waterproof address labels on packages by covering the label with the tape. Not only does this waterproof the label, but it guarantees the label will not fall off. Highly recommended product.
Watch the full video series to make an informed buying decision.
2922 Industrial_and_Scientific_5 POS 5.0 This box gives you a way to experiment and modify the resistor on your project to find the one you need to solder in place. The mini-grabbers are just icing on the cake.
4604 Industrial_and_Scientific_5 POS 5.0 GReat, very bright
7289 Industrial_and_Scientific_5 POS 5.0 works as advertised
307 Industrial_and_Scientific_5 POS 5.0 I've used no name cheap disks. The Dewalt disks last four times longer! although the May not cut as quickly.
Checked accuracy with another one and seems to be dead on. haven't been able to test with a master though
5853 Industrial_and_Scientific_5 POS 5.0 If you need the 200 mph tape they use on NASCAR AND INDIY CARS this is probably it.
5720 Industrial_and_Scientific_5 POS 5.0 This stuff is amazing. Got it installed to eliminate outdoor smoke getting into the air conditioned rooms and lingering forever. It not only did a great job of that but it also reduced the amount of outdoor noise that came through which made the bedrooms more sleep friendly. Also is a dead guarantee that no ants or tiny bugs can crawl through depending on the type of windows you have etc. It also peels back off after years of installation without taking the paint off the surface it was stuck too which is a big plus. good stuff I highly recommend it except for one small thing. The surfaces you are sticking it too must be totally free of dust or it will be a pain to install and it also may require you to use some sort of finger pressure or roller to squash it down and close the window before it re-expands fully. I was unable to fully close my windows all the way to the point that they needed to be to lock them before i figured out that technique.
7313 Industrial_and_Scientific_5 POS 4.0 Kinda messy but it does the job in certain cases
2501 Industrial_and_Scientific_5 POS 5.0 Great price and delivery
8239 Industrial_and_Scientific_5 POS 5.0 I purchased this rod to use as a squib rod, primarily. For those unfamiliar with that term, a squib is bullet that gets stuck in the barrel of a gun due to insufficient propellant (powder). At 0.3125" diameter, this rod will work perfectly in any 9mm, .38 Special, .357 magnum. It will also work fine in larger calibers like 40 S&W and .45 ACP. The 12" length is perfect to ensure that even super long handgun barrels (like some long revolvers) can benefit from its use.
7434 Industrial_and_Scientific_5 POS 5.0 Grex pin guns are the best, and so is the ammo. I order a lot of these in all sizes for our production woodworking shop. Never received any complaints except that they will not fire out of a couple of our older Omer pin guns. Amazon quickly fulfilled an order that was incomplete with no questions asked. That's good customer service. These are good pins. Will not work in older metric pin guns.
2911 Industrial_and_Scientific_5 NEG 2.0 wire is way too small a gauge to be really useful in my application.
I used it on the outdoor storage container that my kids use to store their balls in. It broke in half when it got hit by a basketball.
8516 Industrial_and_Scientific_5 POS 5.0 LOVE THE PRICE! TOO FLIMSY
5332 Industrial_and_Scientific_5 POS 5.0 Good price.
3708 Industrial_and_Scientific_5 POS 4.0 As described. They've been good hoses in the past.
9494 Industrial_and_Scientific_5 POS 5.0 Great product
4550 Industrial_and_Scientific_5 POS 5.0 So many people have written in with very poor experiences with bottles. I looked extra hard to find these for kitchen use with bulk liquid products. The first is a quart of Kitchen bouquet.
7509 Industrial_and_Scientific_5 POS 5.0 drills holes
9866 Industrial_and_Scientific_5 POS 5.0 A+
5099 Industrial_and_Scientific_5 POS 4.0 These are something I need to have in my box of parts. Right now they are a little small for what I generally use. But I think they will come in handy when the time come.
6629 Industrial_and_Scientific_5 POS 5.0 unbelievable stuff.........works really well for so many things
3154 Industrial_and_Scientific_5 POS 5.0 works!
6640 Industrial_and_Scientific_5 POS 4.0 It is a good stethoscope. It is a bit expensive in my opinion but it is better than non working stethoscope which is cheaper. Of course, I had those, too.
7531 Industrial_and_Scientific_5 POS 5.0 Good price and value. Average bit
Happy to say it cuts well with a hand saw and when pre-drilled it holds drywall screws very well.
8241 Industrial_and_Scientific_5 POS 5.0 This is exactly what I needed and the item was shipped quickly and packed very well. I would definitely recommend it.
7249 Industrial_and_Scientific_5 NEG 2.0 Stiff painful plastic. Not soft.
9002 Industrial_and_Scientific_5 POS 4.0 Good product
I also noticed, I don't go through these as quickly as other masks, whether less or even more expensive. Not much more I can ask for. I think I'll order these on a scheduled basis.
Wire length
Highly recommended.
8019 Industrial_and_Scientific_5 POS 5.0 Very solid. I have not yet been able to put it to use, but it appears to be very well made.
7725 Industrial_and_Scientific_5 POS 5.0 I wasn't crazy about the olive green color, but I didn't buy it for the color. I've used plenty of duct tape over the years, and this stuff is outstanding. It's really strong, but is easy enough to tear cleanly. Some cheaper varieties of tape are hard to tear without getting strings or strips, but not this. The adhesive sticks GREAT, but the odd bit is that when you have to remove a piece, it peels off cleanly. It reminds me of a post-it note, but with bigger 'teeth' to hold on. I carry it in my truck every day, and wouldn't be without it.
Thanks!
5460 Industrial_and_Scientific_5 POS 5.0 Much more accurate than litmus papers. Perfect for monitoring pH in your garden and house plants.
1529 Industrial_and_Scientific_5 POS 5.0 I have some porcelain pieces that did not want to attach to each other with standard glue or Gori*** glue. So I tried this and it worked wonders. The solution is very strong so take caution when using because if it gets on your skin your are in a world or hurt. There are methods to get it off though. The glue held up so far and I would definitely buy again.
2417 Industrial_and_Scientific_5 POS 4.0 This set is great for two people moving a large object like a washer or dryer. My boyfriend and I were able to rearrange my washer (to do some repairs) with relative ease (but not as easily as the ad would have you believe haha).
6403 Industrial_and_Scientific_5 NEG 1.0 I must have a defective unit, but this thing will not keep a reading. It jumps wildly over and over again, never stopping on a single measurement. Pretty disappointed after reading all the positive reviews. Will be returning.
4487 Industrial_and_Scientific_5 POS 4.0 This is a really great set of hooks and clips for your pegboard. I was very disappointed that the set I received had BLUE bins and BLUE jar tops and BLUE tipped pegs unlike the YELLOW theme in the picture. That really grinds my gears when companies do that. The yellow would have gone perfectly with my exhisting collection in my hobby room. The color yellow was the deciding factor in the decision to purchase.
1128 Industrial_and_Scientific_5 POS 5.0 Works as designed
Definitely a good way to get started with water quality testing.
7584 Industrial_and_Scientific_5 POS 5.0 Good basic tool for a beginner.
2813 Industrial_and_Scientific_5 POS 5.0 I use arctic silver every time I install a cpu or cooler. I also used it on a quad core i7 laptop that had a history of over heating and it dropped the temps drastically, and NEVER over heated. I recommend it to everyone. Do not try to save money when purchasing thermal compound, buy Arctic Silver 5!!!!
When you pull out your thermopile, if the metal is stamped with Q313A (ignore the next 4 numbers = production lot # or something that is not model # related) or was a generic one with a tag on the wire of White-Rodgers G01A-534, G01A-332, G01A-502, G01A-505 / Robertshaw 1950-001, 1950-532, 1950-536 / Jade PG-36 / General Controls 101934F32, then you are in luck with this product.
140 Industrial_and_Scientific_5 POS 5.0 What can you say about a trash can cover. It works, fits tight and is strong. And my aquarium water is safely covered.
2906 Industrial_and_Scientific_5 NEG 2.0 poor attachment of wires.
Here are my observations:
4094 Industrial_and_Scientific_5 POS 5.0 I love these gloves! Will buy again!!
2651 Industrial_and_Scientific_5 POS 5.0 Been working on computers for decades, this is the only thermal paste I use... period.
1955 Industrial_and_Scientific_5 NEG 1.0 Not even close to as tough as the regular duct tape I bought this for multi purpose tape but it doesn't serve its purpose I am a tape lover I like to have some laying around. this is not transparent so it defeats the point of buying theres no going around it its not clear. and doesn't stick to anything I was hoping to give it a nice review
If your in the market buy them.
10/23/15: This tape is easy to tear, and I used it to cover a wood cover for the crawlspace to my home. Very easy to apply and just ahead of our first major rain storm. It worked perfectly to sheet the rain from the plywood it is covering and looks good too. Very happy with this product and wouldn't hesitate to buy more if needed.
4364 Industrial_and_Scientific_5 POS 5.0 Good price and good tape, what's more to say?
1255 Industrial_and_Scientific_5 POS 4.0 I purchased a pair of these to allow me to install a grid of Unistrut type metal channels on the roof of my workshop by myself. Turns out I only needed but one for that task. I would lean the 3rd Hand against a ladder and then climb the ladder with the strut in one hand. I would place the center of the strut where it needed to be and hold it in place with one hand and then grab the 3rd Hand with the other and place it under the strut and then squeeze the lever to clamp it against the strut to hold it in place against the ceiling. I could then start installing fasteners to attach the strut to the ceiling. I also purchased the 3rd Hand laser attachment clamp and have projects where that combination will also come in very handy. The supports were easy to adjust and operate and were sufficiently sturdy to apply sufficient clamping force to hold steel struts in place against a ceiling. I never felt my head bone was in jeopardy as I proceeded with work on the ten foot long steel channels clamped against the ceiling.
2938 Industrial_and_Scientific_5 POS 5.0 Product exactly as described.
7255 Industrial_and_Scientific_5 POS 5.0 I modified my XBOX 360 and installed a see through panel in it. This Polycarbonate Sheet was easy to cut and fit. Fast shipping.
7059 Industrial_and_Scientific_5 POS 5.0 I got this for an unusual purpose. I wear a hoop skirt when I volunteer in a historic state park. The connectors on the hoops kept coming off and I needed something I could slide over the metal that would hold the two ends together without poking me or tearing the fabric apart. This was perfect for that!
225 Industrial_and_Scientific_5 POS 5.0 If you do any vacuuming this is the way to go. The bags aren't cheap but they hold a lot of dust preventing clogging of the cartridge filter. Prior to using these I'd have to clean the filter several times a day and get dust and grit all over myself. With the bags, do go several days of sanding and cleanup before the bag needs replacement and the cartridge filter is relatively clean. Don't get any dirt on you when you remove the bag.
* Drilled a 1/8" pilot hole (B00004RGVZ
1598 Industrial_and_Scientific_5 POS 5.0 Well, not everything I did was a mistake but there were more than Id like to admit. I do a lot of my own building and am making a lot of repairs to my current house and a log cabin I have. When I did a lot of roofing & siding work I assumed water would flow down and away so thats how I built everything. Along comes winter and the dreaded ice dams and now water flows uphill and under everything to then leak into the living spaces. I pulled some vinyl siding off to put on an addition and after only a few years enough water had gotten behind the siding and even the house wrap that it rotted away some large sections of OSB. I found the source of leaks to be where water ran down the sides of some window J-channels and where a sloped roof met an outside wall. I pulled off everything, made the repairs and then put all the trim back with healthy does of this sealant and the leaks are now gone and ice cant push up under it. I also use the clear around my wood stove pipes & roof flashing and it seals them tight so no water running down the pipe onto the stove when strong winds are pushing heavy rains. Im putting flashing over all the exposed wood fascia and this stuff ensures no water gets under it. if you vinyl siding you are likely getting water damage near the windows so don't assume that because you don't see it its not happening. Ive no gone through about a dozen tubes of this stuff over the past few years and never had a problem with it and have stuck a large nail in open tubes and since its flexible the nail comes out easily and the product is still usable. Its also a good adhesive so I can attach flashing with a minimum of exposed nail and/or screw heads. For exterior work its the best product Ive found at a reasonable price. Ive even had success with it on sealing gutter leaks in the connectors.
564 Industrial_and_Scientific_5 POS 5.0 Fits and works and also because it is not reversible it is quickly in need of replacement. The solution is to always run it at max speed and use a delicate touch. There is no substitute. If you need one of these this is the one to buy.
9535 Industrial_and_Scientific_5 POS 5.0 Works perfectly
8915 Industrial_and_Scientific_5 POS 5.0 Quality Product
5315 Industrial_and_Scientific_5 POS 5.0 Used to add a pressure gauge and relief valve to a 55 gal. drum.
Allen Camouflage Duct Tape is a good choice for outdoor work and will hold up well when properly applied. Make sure you have a sharp knife when working with it in the field, though.
6869 Industrial_and_Scientific_5 POS 5.0 I used it only once so far. Works well with a heat gun.
- It is made of stainless steel, and has a nice weight to it in use - the plastic ones don't "feel" accurate.
2023 Industrial_and_Scientific_5 POS 4.0 These came straight from China i'm not sure they are authentic. but they seem pretty good. they work great with my for sure authentic Fluke probes and clips.
I used this same as I do the RD, I spray for spots, and do a full hot water pass the first time then a cleaning fluid pass, then a final cold water or warm water finish. It seems like a lot of work but I have a white carpet in the larger areas and hallways so it's needed. I used this on the halls and the entryway landing as they had the most soil. I swept very through first with a good quality upright carpet sweeper. Then did the process, now this says it's a "SteamVac", but that is some kind of make name. It's usually food products that try to fool you with their name, there's no cheese in Cheese Whiz (except in Canada), and I'm surprised they would tag something like that to a product like this. This is not a steamer, you want steam, make the water in the soap tank hotter. It did a nice job on the halls, but I could see there was a little gray in the traffic area which I don't get with the RD, so it is not quite as good. I went over it a few times and that helped, but that doesn't make it as good.
2861 Industrial_and_Scientific_5 POS 5.0 I received this in the mail today and it is a "very" nice unit. Is is smooth but a bit seemd little stiff (not jerky) out of the box. It does not have a "thumb" wheel like the Starret which I also have in this size. I tried the Starret without using the thumb wheel and it was identical to the this unit in effort required. So a thumb wheel will reduce effort to move. I tried both the Starret and this unit on a known object and got exactlly the same readings as one would expect. The Silver numerals on the black back ground are as easy to read as the black on white numerals on the Starret even in dim light. This unit has a solid metal dial case (Starret has plastic) which I really like and seems to be a touch smaller in over all dimensions than the Starret. The unit comes in an attractive dark grey plastic case with a positive slide latch mechanism. The Starret comes in a red plastic box wih a simple "pop" type latch. Additionally this unit has space in the standard plastic case that is supplied for a T-Bar depth base. You must upgrade to the optional case if you want that for the Starret. All in all it is really hard to choose between the two as both are qulity instruments. Note if you get the T-Bar depth base you need to order part no. 5.60013. It is finished in silver and sized in mm and is approximatley 3 inches long and will fit in the supplied box. Do not order part 5.60086. It is finsihed in black. It will fit the caliper but is too big at 3.35" long to fit in the cuttout in the supplied case!
7635 Industrial_and_Scientific_5 POS 5.0 Of the millions of uses for Velcro this can fill most of them. The tape is very adhesive.
5261 Industrial_and_Scientific_5 POS 5.0 Good Product and the description is exactly correct
967 Industrial_and_Scientific_5 POS 5.0 good quality.
340 Industrial_and_Scientific_5 POS 4.0 A useful tool.
1487 Industrial_and_Scientific_5 NEG 1.0 clorox cleaner ate through plastic, fell apart, stopped spraying and started spitting out in all different directions, got bleach cleaner in my eye
3539 Industrial_and_Scientific_5 POS 5.0 Great
3274 Industrial_and_Scientific_5 POS 5.0 Very good little kit for the money. Recently, I had to repair a PVC line in the backyard and used this primer/cement combo to set everything.
2984 Industrial_and_Scientific_5 POS 5.0 Good for the price
1615 Industrial_and_Scientific_5 POS 5.0 very nice part.
-- Turn off the meter, then turn it back on before each reading. It IS a little more hassle, but it will help with accuracy. The instructions say the same thing, and there is a reason for that.
414 Industrial_and_Scientific_5 POS 4.0 Happy with this grommet set!