Erection of Level 2 pedestrian crossover signs
 7. (1) The signs illustrated in paragraph 1 of subsection 6 (1) shall be erected as follows: 1. For each direction of travel, each sign shall be erected in two places on the same standard, mounted back to back, so that the signs face in opposite directions and one sign faces approaching traffic. 2. Each sign shall be at a point not more than 4 metres from the edge of the roadway, adjacent to the place where the pedestrian crossover described and illustrated in section 8 meets the edge of the roadway. 3. Where the highway is divided into two separate roadways, the sign illustrated as Figure 2 shall be erected on the left side of each roadway facing traffic at a point not more than 4 metres from the edge of the roadway. (2) The sign illustrated in paragraph 2 of subsection 6 (1) or in paragraph 2 of subsection 6 (2) shall be erected, (a) in the same manner as and immediately below the signs illustrated in paragraph 1 of subsection 6 (1); and (b) with the bottom of the sign not less than 1.5 metres from the ground. (3) Subsection (2) does not apply to the signs illustrated in paragraph 1 of subsection 6 (1) that are mounted overhead as set out in subsection (5) or (6). (4) The signs illustrated in paragraph 3 of subsection 6 (1) and in paragraph 3 of subsection 6 (2) shall be erected, (a) on the right side of the highway facing approaching traffic; (b) at a point not more than 4 metres from the edge of the roadway and 30 metres before the place where, from the perspective of approaching vehicular traffic, the pedestrian crossover illustrated in section 8 meets the edge of the roadway; and (c) such that the sign illustrated in paragraph 3 of subsection 6 (2) is below or beside the sign illustrated in paragraph 3 of subsection 6 (1). (5) Where the roadway has been divided into two clearly marked lanes for traffic, the sign illustrated as Figure 1 in paragraph 1 of subsection 6 (1) may also be erected above the pedestrian crossover facing vehicular traffic as nearly as practicable over the centre of each lane. (6) Where the roadway has been divided into more than two clearly marked lanes for traffic, (a) the sign illustrated as Figure 1 in paragraph 1 of subsection 6 (1) may also be erected above the pedestrian crossover on the right side facing vehicular traffic as nearly as practicable over each half of the roadway for each direction of travel; and (b) the sign illustrated as Figure 2 in paragraph 1 of subsection 6 (1) may also be erected above the pedestrian crossover on the left side facing vehicular traffic approaching on the right side of the roadway as nearly as practicable over each half of the roadway for each direction of travel. (7) A rapid rectangular pedestrian-activated flashing amber beacon may be erected directly above the signs illustrated in paragraph 1 of subsection 6 (1) as illustrated in section 8. (8) For each direction of travel where a rectangular beacon described in subsection (7) is erected, each indication shall be illuminated and flash alternately when activated by a push button or other device, and shall not otherwise be illuminated or flash. (9) The sign illustrated in paragraph 4 of subsection 6 (1) may be erected on the right side of the highway facing approaching traffic no more than 100 metres before the sign illustrated in paragraph 3 of that subsection.