6. (1) If a thermal generation unit has a name plate capacity of more than 25 megawatts and the annual amount of sulphur dioxide emitted by the unit can reasonably be expected to exceed the reporting threshold set out for sulphur dioxide in Table 3 to the Guideline for Emission Calculation, Record Keeping and Reporting for Electricity Generation, the generator shall ensure that the unit has a continuous emission monitoring system for sulphur dioxide. O. Reg. 227/00, s. 6 (1). (2) If a thermal generation unit has a name plate capacity of more than 25 megawatts and the annual amount of oxides of nitrogen emitted by the unit can reasonably be expected to exceed the reporting threshold set out for oxides of nitrogen in Table 3 to the Guideline for Emission Calculation, Record Keeping and Reporting for Electricity Generation, the generator shall ensure that the unit has a continuous emission monitoring system for oxides of nitrogen.O. Reg. 227/00, s. 6 (2). (3) If all emissions of a contaminant from one or more generation units are emitted through a stack, a continuous emission monitoring system for the contaminant required by subsection (1) or (2) may be installed on the stack, instead of on the generation units. O. Reg. 227/00, s. 6 (3). (4) Subsection (1) or (2) does not require a generator to ensure that a generation unit has a continuous emission monitoring system for a contaminant if the Director is satisfied that the generator is taking reasonable steps to ensure that, within a reasonable period of time not exceeding two years, the annual amount of the contaminant emitted by the unit will not exceed the reporting threshold referred to for the contaminant in subsection (1) or (2). O. Reg. 227/00, s. 6 (4). (5) If subsection (1) or (2) requires a generator to ensure that a generation unit has a continuous emission monitoring system, the generator shall ensure that the system is designed, installed and operated in a manner that will provide measurements of emissions that the Director considers to be as accurate as the measurements that would be provided by a continuous emission monitoring system designed, installed and operated in accordance with the Environment Canada publication entitled “Protocols and Performance Specifications for Continuous Monitoring of Gaseous Emissions from Thermal Power Generation” and dated September 1993, as amended from time to time. O. Reg. 227/00, s. 6 (5). (6) If subsection (1) or (2) requires a generator to ensure that a generation unit has a continuous emission monitoring system, the generator shall ensure that all records required by the Guideline for Continuous Emission Monitoring (CEM) Systems Record Keeping and Reporting for Electricity Generation are made in accordance with the Guideline. O. Reg. 227/00, s. 6 (6). (7) Every generator that is required by subsection (1) or (2) to ensure that a generation unit has a continuous emission monitoring system for a contaminant shall, not later than 60 days after the end of each quarter, submit to the Director a report on the quarter that contains the following information: 1. The name and address of the generator. 2. The name and address of the person who prepared the report, if that person is not the generator. 3. The name, address and geographical location of the generation facility. 4. The name or number of the generation unit or stack to which the continuous emission monitoring system applies. 5. The type of generation unit. 6. The type or types of energy sources used by the generation unit to produce electricity. 7. The type of pollution control device or method used for emissions of the contaminant from the generation unit. 8. The average emission rate for emissions of the contaminant from the generation unit during the quarter. 9. The quantity of the contaminant emitted from the generation unit during the quarter. 10. If the quarter began after March 31 in a year, i. the average emission rate for emissions of the contaminant from the generation unit during the period from January 1 in the year to the end of the quarter, and ii. the quantity of the contaminant emitted from the generation unit during the period from January 1 in the year to the end of the quarter. 11. Such other information as is specified in the Guideline for Continuous Emission Monitoring (CEM) Systems Record Keeping and Reporting for Electricity Generation. O. Reg. 227/00, s. 6 (7). (8) The generator shall ensure that the report referred to in subsection (7) is prepared and submitted in accordance with the Guideline for Continuous Emission Monitoring (CEM) Systems Record Keeping and Reporting for Electricity Generation. O. Reg. 227/00, s. 6 (8). (9) The generator shall ensure that records are made, in an electronic format approved by the Director, of all calculations made in the preparation of the report referred to in subsection (7). O. Reg. 227/00, s. 6 (9). (10) The generator shall ensure that, for at least seven years after the report referred to in subsection (7) is submitted to the Director, it is made available, on request, for examination by any person during regular business hours at the generation facility. O. Reg. 227/00, s. 6 (10). (11) If, on April 30, 2000, a thermal generation unit does not have a continuous emission monitoring system for sulphur dioxide, subsection (1) does not apply to the unit until May 1, 2001. O. Reg. 227/00, s. 6 (11). (12) If, on April 30, 2000, a thermal generation unit does not have a continuous emission monitoring system for oxides of nitrogen, subsection (2) does not apply to the unit until May 1, 2001. O. Reg. 227/00, s. 6 (12).