11. Every operator shall keep at the operator’s principal place of business in Ontario, (a) the records and statements for a commercial motor vehicle required under section 10 until the earlier of two years after the records and statements are made and six months after the commercial motor vehicle ceases to be the operator’s responsibility; and (b) the inspection report for each commercial motor vehicle for which the operator is responsible for three months after the report is completed. R.R.O. 1990, Reg. 575, s. 11. SCHEDULE 1   OUTSIDE INSPECTION 1. All lights and reflectors (equipped and functioning as required under the Act and the regulations). 2. Wheels and fasteners (for wheel or rim cracks, defective lock rings, loose or missing fasteners). 3. Tires (for tread depth, flat or noticeable leak, any visible bumps or bulges, mixture of bias and radial tires on same axle, contact with any part of the vehicle or any other tire). 4. Fuel system (for a visible leak at any point, tank filler caps shall not be missing, fuel tank shall be securely mounted). 5. Exhaust system (for audible leaks, missing or loose components, secure mountings). 6. Fifth wheel (for loose, missing or ineffective fasteners, missing, broken or deformed parts in the locking mechanism, operating handle being in closed or locked position when in use). 7. Suspension, spring, air bags and controlling attachments (for any cracked, broken, loose or missing axle positioning or fastening parts, broken or missing spring leaves, broken coil springs, deflated air suspension due to system failure). 8. Towing and coupling devices as required under the Act and the regulations (for missing or unattached safety devices, or safety devices not capable of secure attachment, wear kinks or broken cable strands, improper repairs). 9. Load security (for compliance with the requirements of Regulation 614 of the Revised Regulations of Ontario, 1990). 10. Load covering (for compliance with the requirements of Regulation 577 of the Revised Regulations of Ontario, 1990). 11. Air brake adjustment and connections (for absence of braking action on each wheel, missing, broken or loose mechanical components where readily visible, audible air leaks and brake readjustment limits). 12. Hydraulic brake fluid (for visible leakage). 13. Mirrors as required under the Act and the regulations (for condition and adjustments). R.R.O. 1990, Reg. 575, Sched. 1. SCHEDULE 2   INSIDE INSPECTION 1. Steering wheel, excessive play, looseness. 2. Brake pedal reserve and fade. 3. Brake booster operation. 4. Brake failure warning light functions as intended. 5. Brake air pressure or vacuum gauge. 6. Warning signal, low pressure or low vacuum. 7. Windshield washer and wipers function as intended. 8. Windshield and windows are to afford the driver a clear view. 9. Mirrors, adjustment and condition. 10. Defroster and heaters function as intended. 11. Horn functions as intended. 12. Driver’s seat belt and seat security function as intended. 13. Parking brake adequate to hold vehicle. 14. Emergency equipment as required under any Act and the regulations made thereunder for that class of vehicle. R.R.O. 1990, Reg. 575, Sched. 2. SCHEDULES 3-5 Revoked: O. Reg. 275/99, s. 6.