13. A certificate of qualification in the certified trade is not required to be renewed. R.R.O. 1990, Reg. 1071, s. 13. SCHEDULE 1 Part I   PAINTER AND DECORATOR COMMERCIAL AND RESIDENTIAL IN-SCHOOL TRAINING  ITEM

COLUMN 1

COLUMN 2

COLUMN 3


 

Course

Subject

Instruction to be Given


1

Mathematics    (Trade Related)

 

Addition, subtraction, multiplication and division of whole numbers, fractions, decimals. Weights and measures. Ratio and proportion. Percentage, discounts and simple interest. Areas, volumes, linear and angular mensuration. Simple equations and formulae calculations. Metric system; conversion methods.


2

Communications

General

Reading comprehension. Trade terminology, usage. Sentence and paragraph structure. Letter, report writing. Work, material and parts orders. Interpretation, use of manufacturers’ manuals and instructions, job specifications. Oral communication.


3

Drafting

Basic Drafting and Interpretation

Architectural drafting techniques; scales, symbols, projections. Preparation of elementary trade related working drawings and dimensioned sketches. Reading and interpretation of construction plans, elevations; specifications for frame, masonry, concrete construction. Details, work schedules. Wall and ceiling surface areas for decorating estimates. Bills of material preparation.


4

Trade Tools and Procedures

Safety

Safety rules and safe operating procedures. The Occupational Health and Safety Act. The Workers’ Compensation Act. Protective clothing and equipment. First Aid. Fire prevention; use and maintenance of fire fighting equipment. Handling and storage of flammable and toxic materials and solvents. Ventilation. Dangers of spontaneous combustion. Lead poisoning, dermatitis and silica dust hazards. Correct use of lifting and hoisting equipment, electric power tools and equipment. Good housekeeping.


 

 

Hand Tools

Care and use of paint brushes (bristle, nylon), fitches. Paint rollers. Graining, marbling, blending, mottling, texturing, stippling tools and rollers. Stencil knives. Putty knives, scrapers, wire brushes. Paperhanging brushes, rollers, cutters, shears, chalklines.


 

 

Power Tools and Equipment

Types, use and maintenance of portable air and electric sanders, grinders, brushes. Abrasive materials; types, grits, grades. Paint burning torches, steam wallpaper stripping machines, air compressors, sandblasting equipment. Taping machines. Scaffolding, ladders, steps, trestles. Swingstages (manual and electric), bosun’s chairs and related equipment.


 

 

Layout and Measuring Devices

Care and use of rules, tapes, squares, straightedges, compasses and dividers, plumb bobs, chalk lines. Patterns, templates, stencils. Viscosity cups. Paint film gauges.


5

Trade Practices    Coating Materials

Properties and Characteristics

Chemical properties, uses, drying characteristics of organic and synthetic coating materials. Temperature and humidity effects. Paints, enamels (alkyds, phenolics), varnishes, lacquers, shellacs, calcimine primers, sealers, epoxy resins, silicones, vinyls, emulsion coatings, oils, waxes; wood stains, bleaches, preservatives. Adhesives.


 

 

Formulation

Types and purpose of pigments, vehicles or binders, extenders, driers, accelerators and retarders, thinners, solvents, catalysts.


 

 

Mixing

Material mixing, reduction, viscosity, straining for brush, roller or spray application. Material, thinner or solvent compatibility and intermixing. Tinting colours. Colour harmony; theory, styling, recognition. Colour cards. Matching and tinting to samples. Material covering and hiding properties. Paint and coating film failure; recognition, terminology and causes. Corrective procedures. Paint systems and specifications. Film thickness and adhesion tests.


6

Trade Practices    Brush Work

Brush and Roller Techniques

Brush types, sizes, purpose. Cleaning methods and materials. Brush manipulation for specific materials; flowing on, brushing out, cutting in, laying off. Avoiding runs and sags. Lining and striping procedures. Roller application techniques.


7

Trade Practices    Spray Painting

Spray Guns and Equipment

Conventional and airless (hydraulic) gun types. Operating principles, component parts. Syphon cups and pressure pots. Cleaning, adjustment and maintenance procedures. Types and construction of air and fluid hoses, couplings and adaptors. Pressure drop. Air transformer types, purpose and installation. Minimum pipe sizes. Moisture and oil problems and correction. Adjustment and maintenance.


 

 

Spraying Techniques

Use and servicing of organic vapor and dust type respirators and masks. Masking procedures after surface preparation. Use of masking tape and taping machine. Importance of correct gun type, fluid tip and air cap combination, fluid and spreader adjustment, regulated air and fluid pressures, viscosity for material used. Spray patterns and corrective adjustments. Gun position, distance, stroking, triggering, speed and overlap. Practice spraying of vertical and horizontal panels, inside and outside corners.


8

Painting

Preparation

Protection of floors, trim, furniture. Use of drop sheets, building paper, masking tape.


 

Interior Work

 

New plaster; drying time, use of moisture meter. Surface neutralizing requirements and materials.


 

(Plaster and Wallboard)

 

Hotspot treatment. Use of litmus paper. Stain causes, killing methods and materials.


 

 

 

Repairing cracks and holes; preparation and cutting out. Filling materials; mixing and application. Types of wallboards and joint cements. Joint taping and sanding methods.


 

 

 

Preparation of previously painted and papered plaster. Gas fume discolouration. Washing methods and materials. Old calcimine removal and stripping off wallpaper.


 

 

 

Surface sanding requirements. Sand paper types and grades. Hand and power sanding techniques.


 

 

Priming and Sealing

Surface porosity. Types and use of oil based, polyvinyl acetate, acrylic primers and sealers. Thinners, viscosity. Tinting methods. Brush and roller application.


 

 

Second Coat

Drying times between coats. Between coat sanding. Material types, tinting and thinning. Application.


 

 

Finish Coat

Finishing material types, hiding and covering qualities; enamels, flats. Tinting methods. Mixing, consistency. Application and laying off. Stippling techniques.


 

 

Latex Paints

No neutralizing required. Effects of zinc sulphate and sizing materials under latex paints. Tinting materials and methods. Mixing; overthinning effects. Application methods.


9

Painting

Preparation

Trade and architects’ specifications for finish and number of coats. Wood absorption qualities. Peeling, scaling and blistering causes.


 

Interior Work

 

Use of spatchling materials. Treatment of knots, sap and bleeding stains.


 

(New, Painted or Varnished Wood)

 

Paint removal techniques; burning, use of paint removers. Safety precautions. Neutralizing.


 

 

 

Preparation of varnished wood for enamel. Wax and polish removal, washing methods and materials. Special undercoats for varnished woodwork.


 

 

Priming Coat

Types and choice of primers, thinners and driers. Consistency. Brush and roller application and laying off.


 

 

Undercoats

Drying time before recoating. Types of undercoats. Sanding and dusting between coats. Consistency. Tinting colours. Use of putties and stopping. Undercoat application and laying off. Material quantities.


 

 

Finish Coats

Finishing materials; flats, semi-gloss, enamels. Number of coats. Matching colours. Brush, roller and spray application techniques. Temperature requirements. Enamel rubbing methods.


10

Painting    Interior Work

Preparation 

Trade finish specifications. Old and new surface preparation techniques. Mill scale, rust and corrosion treatment; types and use of corrosion inhibiting materials. Paint receiving qualities of metals. Pre-paint treatment of galvanized metal. Old paint removal methods.


 

(Metal)

Priming Coat

Metal primer types and correct usage. Heat resisting paints, heat effects on light colours, conductivity. Brush, roller and spray application.


 

 

Second and Finishing Coats

Paint and enamel types for metal finishing. Industrial colour code and piping code. Colour harmony; room finishes. Material costing. Brush, roller and spray application.


11

Painting    Interior Work

Preparation

Trade finish specifications. Absorptive qualities of concrete, brick, stone, concrete blocks. Moisture content, use of moisture meter. Use of acids and cleaning solutions. Neutralizing with zinc sulphate; litmus paper tests. Efflorescence treatment. Pointing and stopping materials and methods.


 

(Concrete and Masonry)

Priming Coat

Characteristics of polyvinyl acetate (P.V.A.), acrylic, oil and varnish sealers. Thinner types. Thinning and tinting primer coat. Application methods.


 

 

Second and Finish Coats

Determination of material quantities. Colour harmony. Concrete floor paints, thinner types and uses. P.V.A. and acrylic finishes. Multi-coloured paints and undercoats. Cement finishes. Correct brush, roller or spray application method for material used. Techniques for laying out and stripping concrete floors.


12

Painting    Exterior Work

Preparation

Woods to paint or stain; weathering effects, causes of peeling, scaling, blistering. Interior dampness or condensation effects; correction methods, testing with litmus paper and moisture meter.


 

(Wood)

 

Architects’ specifications for finish and number of coats. Old paint removal methods. Wire brushing, sanding, dusting. Spotting-in burned off areas. Knot and sap treatment. Caulking compound application.


 

 

Priming Coat

Exterior primers, purchased or painter prepared; function and consistency. Types of oil, thinners, driers and usage.


 

 

 

Absorption qualities of various woods. Reasons for brush application, not spray. Controlled penetration theory.


 

 

 

2-Coat system (Heavy priming coat). Back priming.


 

 

Second Coat

Puttying, sanding and caulking requirements. Exterior paints; brands, grades, fade resistant colours and usage.


 

 

 

Thinning and application methods.


 

 

Finish Coat

Use of ready mixed coloured paints. Self cleaning whites. White tinting bases. Pigment volume. Thinner types and usage. Avoiding oil use in finish coats.


 

 

 

Application methods. Material quantities.


13

Painting    Exterior Work    (Shingled Roofs)

Preparation

Cleaning off old roofs.
Fastening loose shingles.
Good roof paint and stain grades.
Materials and mixing methods.
Harmonizing colour combination with trim. Number of coats.


 

 

First and Finish Coats

Paint and stain application methods. Brush types. Covering butts. Material mixing for finish coat. Material quantities.


14

Painting    Exterior Work

Preparation

Specifications for finish type and number of coats. Cleaning and neutralizing. Efflorescence treatment. Crack repairs, pointing and stopping. Litmus paper and moisture meter tests.


 

(Concrete and Stucco)

Priming Coat

Use of P.V.A., acrylic, oil and varnish sealers, thinners. Consistency. Tinting colours. Brush, roller or spray application.


 

 

Finish Coat

Colour harmony. Application of P.V.A., acrylic, oil finishes, multi-coloured paints and their undercoats. Application methods and equipment for cement and stucco finishes. Material quantities.


15

Painting    Exterior Work

Preparation

Hand and power metal cleaning tools and techniques. Sandblasting methods. Rust and corrosion causes; chemical treatments, rust inhibiting materials. Galvanized metal treatment.


 

(Metal)

 

Paint removal; use of alkaline and emulsion cleaners, passivating treatment, pH testing. Steam cleaning.


 

 

Priming Coat

Material specifications for exposure and environment. Antifouling paints. Red lead (and additives) primers; advantages, usage. Primers for aluminum, bright metals. Wash primers. Wetting ability. Drying time. Heat resisting paints for smoke stacks. Epoxies. Thinners, solvents, catalysts. Mixing and thinning procedures. Brush, roller and spray application.


 

 

Second or Finish Coat

Recoating requirements. Water and salt water effects on metals and paints. Suitable types of paints, enamels, lacquers, epoxies. Graphite paints. Metallic dust mixtures. Material application methods. Metal roof painting techniques. Field touch-up painting.


16

Wood Finishing    Interior Work    (Natural, Satin, Bleach, Varnish and Lacquer Finishes)

Old Finish Removal     Preparation

Liquid remover types and usage. Block removers. Purpose of neutralizing. Cleaning methods. Fire hazards.    Specifications for job requirements. Sanding methods and materials. Wood types; characteristics, imperfections and corrective treatments.    Prepared coloured fillers. Filler colouring methods. Thinning solvents. Satin and filler application, excess removal techniques. Specially prepared stains. Wood texture variations; equalizing suction, appropriate finishes. Between coat drying time.


 

 

 

Bleaching procedures; materials and brush types.


 

 

 

Types of shellacs and solvents. Consistency and cuts. Temperature and humidity effects. Application methods. Between coat treatment.


 

 

 

Putty types, uses, mixing and colouring. Application and excess removal methods.


 

 

First and Second (Finish) Varnish Coats

Varnish types and grades. Reducing solvents. Application techniques; preventing runs, sags, imperfections. Between coat sanding. Rubbing down, cleaning and polishing materials and techniques. Material quantities.


 

 

Lacquer Coats

Lacquer sealers. Clear brushing and spraying lacquers. Lacquer thinners, use for reducing. Temperature and humidity effects, use of retarders. Brush and spray application techniques, preventing runs and sags. Sanding between coats. Cleaning and polishing materials and techniques.


17

Wood Finishing

Preparation

Finish specifications. Old varnish removal; hand and power wire brushing, sanding, dusting methods. Correct abrasive use.


 

Exterior Work

 

Stain mixing, filler colouring and application techniques. Drying time and excess removal. Use of prepared stains and tinted sealers. Equalizing suction.


 

(Natural, Stain, Varnish Finish)

 

Putty types; mixing, colouring, application and excess removal.


 

 

First and Second Varnish Coats

Use of correct varnish, reducing solvent, brush types. Application techniques; preventing runs, sags, imperfections. Temperature and humidity effects. Between coat treatment.


18

Interior Decorating    Wall Coverings  

Preparation

Repairing ceiling, wall cracks and imperfections. Treatment of old and new plaster and wallboard, calcimine and water base paints. Stripping and readying papered surfaces. Neutralizing methods.


 

(Paperhanging)

 

Size types, purpose; preparation and application methods.


 

 

Cutting and Pasting

Checking pattern, run and lot number. Starting procedure. Measuring, cutting lengths and removing curl. Pasting and folding short and long ends. Matching, plumbing and trimming. Starting and finishing conditions. Filling in. Butting seams and rolling. Hand tool types and usage. Turning corners and cutting around lights.


 

 

Hanging Paper and Border

Finishing and joining conditions. Hanging level. Matching sloping ceilings.
First strip application. Butting joints.


 

 

Hanging Panels

Laying out panels and block pattern. Panel to stile ratio. Chalk line use. Centering pattern. Hanging field, stiles and border.


 

 

Papering Stair Wells and Halls

Starting procedure. Correct top. Cutting paper to fit stair well rake.


19

Interior Decorating

Preparation

Surface repairs and treatment.


 

Wall Coverings    (Fabrics)

Grass Cloth, Wood Veneers

Special primer and adhesive types and application methods.
Material soaking, wet or dry trimming and application techniques. Eliminating springing and bubbles. Adherence to manufacturers’ instructions.


 

 

Vinyl Wall Covering

Tests for minimum allowable wall moisture content. Applying special colour matched primers and adhesives for vinyl fabric.
Hanging procedures. Overlapping and cutting edges. Joints 4I minimum from inside and outside corners. Removing excess adhesive from fabric. Adherence to manufacturers’ instructions for lot number and shading.


20

Interior Decorating    Special Finishes

Graining

Surface preparation. Filling and sanding.
Ground coats; correct colour, mixing and straining. Application of prepared coats and mixed coats.
Mixing glaze with colours.
Distemper colours and usage. Thinner types. Ground coat application, rubbing in, softening. Action of oils, turpentine, driers. Megilp types and usage. Wood grain characteristics. Graining processes and tools. Varnish types and application.


 

 

Blending

Colour harmony. Mixing colours. Retarding methods. Use of softener and cheese cloth pad.


 

 

Mottling

Application and starting techniques. Retarding and setting. Varnish types and usage. Causes of creeping, sissing and sagging.


 

 

Stippling

Surface preparation as required. First coat; material types, colour mixing and application methods. Sanding.
Second and finish coats; material types, tinting and application methods. Use of stippling tools and decorative rollers.


 

 

Glazing and Antiquing

Surface preparation as required. Undercoats; material and thinner types. Colour preparation.
Brushing techniques.
Types of glazes. Mixing glazing colours. Application tools and methods. Finishing.


 

 

Texturing

Surface preparation as required. Sealer types, purpose. Application over old and new surfaces.
Texture types available. Correct consistency. Application methods, tools and equipment.


 

 

Marbling

Surface preparation as required. Mixing of base colours. Marble types and characteristics.
Mixing and applying ground colour coat. Marking off techniques, drying time.
Mixing and applying glaze. Veining colours. Veining and softening tools and techniques. Part II   PAINTER AND DECORATOR INDUSTRIAL IN-SCHOOL TRAINING  ITEM

COLUMN 1

COLUMN 2

COLUMN 3


 

Course

Subject

Instruction to be Given


1

Mathematics   (Trade Related)

Mathematics

Addition, subtraction, multiplication and division of whole numbers, fractions, decimals. Weights and measures. Ratio and proportion. Percentage, discounts and simple interest. Areas, volumes, linear and angular mensuration. Simple equations and formulae calculations. Metric system; conversion methods.


2

Communications   (Trade Related)

General

Reading comprehension. Trade terminology, usage. Sentence and paragraph structure. Letter, report writing. Work, material and parts orders. Interpretation, use of manufacturers’ manuals and instructions, job specifications. Oral communication.


3

Blueprint Reading

General

Architectural drafting techniques; scales, symbols, projections. Reading and interpretation of construction plans, elevations, specifications for frame, masonry, concrete and structural steel construction. Details, work schedules. Surface areas for estimates. Bills of material preparation.


4

Trade Tools and Procedures

Safety

Safety rules and safe operating procedures. The Occupational Health and Safety Act. The Workers’ Compensation Act. Protective clothing and equipment. First aid. Fire prevention; use and maintenance of fire fighting equipment. Handling and storage of flammable and toxic materials and solvents. Ventilation. Dangers of spontaneous combustion. Lead poisoning, dermatitis and silica dust hazards.


 

 

 

Correct use of lifting and hoisting equipment, scaffolds, ladders, swing-stages; electric power tools and equipment, sandblasting equipment; conventional, air-less and electro-static spraying equipment. Working inside vessels; mandatory use of air-fed hoods, spark-proof tools and equipment, explosion-proof electrical devices. Good housekeeping.


 

 

Hand Tools

Care and use of paint brushes (bristle, nylon). Paint rollers. Scrapers, chipping hammer, wire brushes.


 

 

Power Tools and Equipment

Types, use and maintenance of portable air and electric sanders, grinders, chipping hammers, brushes. Abrasive materials; types, grits, grades. Air compressors, sandblasting equipment. Taping machines. Scaffolding, ladders, steps, trestles. Swing-stages (manual and electric), bosun’s-chairs and related equipment. Correct use of ropes and cables. Knot types, usage, tying.


 

 

Spray Guns and Equipment

Conventional and airless (hydraulic) gun types. Operating principles, component parts. Syphon cups and pressure pots. Cleaning, adjustment and maintenance procedures. Types and construction of air and fluid hoses, couplings and adaptors. Pressure drop. Air transformer types, purpose and installation. Minimum pipe sizes. Moisture and oil problems and correction. Adjustment and maintenance.


 

 

Layout and Measuring Devices

Care and use of rules, tapes, squares, straightedges, compasses and dividers, plumb bobs, chalk lines. Patterns, templates, stencils. Viscosity cups. Paint film gauges. Moisture meters.


5

Coating Materials

Properties and Characteristics

Chemical properties, uses, drying characteristics of organic and synthetic coating materials. Temperature and humidity effects. Paints, enamels (alkyds, phenolics), varnishes, lacquers, shellacs, sealers, silicones, vinyls, emulsion coatings, oils, waxes; wood stains, bleaches, preservatives. Adhesives. Protective coatings; vinyls, chlorinated rubber based, neoprene, epons, epoxy resins. Mastics and cements. Selection factors for environmental conditions: sunlight and water, stress, impact, abrasion, heat, water, salts, solvents, alkalis, acids, oxidation. Manufacturers’ technical data.


 

 

Formulation

Types and purpose of pigments, vehicles or binders, extenders, driers, accelerators and retarders, thinners, solvents, catalysts.


 

 

Mixing

Material mixing, reduction, viscosity, straining for brush, roller or spray application. Material, thinner or solvent compatibility and intermixing. Material covering and hiding properties. Paint and coating film failure; recognition, terminology and causes. Corrective procedures. Paint systems and mil thickness specifications. Film thickness and adhesion tests.


6

Surface Preparation

Cleaning (Hand Tools)

Job specifications for coatings to be applied, correct surface preparation method. Correct use of wire brush, paint scraper, chipping hammer.


 

 

(Power Tools)

Correct use of rotary brush, sanders, chipping hammers (electric or pneumatic).


 

 

(Sandblasting)

Cost advantages over other methods. Selection factors: silica sand grain size, type; dust or “fines”. Hose type, size, lengths, “deadman” shut-off controls. Nozzle size and type to ensure sufficient air pressure. Air supply: adequate pressure and volume for nozzle type. Moisture or contaminant separation (including air supply to airfed hoods). Continuous, intermittent and double outlet sandblast systems. Brush-off, commercial and white metal blast finishes.


 

 

(Solvent Use)

Use on old surfaces in good condition, not requiring mechanical preparation. Use on new but contaminated surfaces. Use between coats to prevent inter-coat contamination.


 

 

 

Selection of suitable solvents.


 

 

(Other Methods)

Water-wash pressure cleaning. Acid etches. Degreasing solutions. Flame cleaning.


7

Paint Application

Brush Techniques

Brush types, sizes, purpose. Cleaning methods and materials. Brush manipulation for specific materials; flowing on, brushing out, cutting in, laying off. Avoiding runs and sags. Lining and striping procedures.


 

 

Roller Techniques

Types of rollers: dip, fountain and pressure; roller application methods; cleaning.


 

 

Spraying Techniques (Conventional)

Use and servicing of organic vapor and dust type respirators and masks. Masking procedures after surface preparation. Use of masking tape and taping machine. Importance of correct gun type, fluid tip and air cap combination, fluid and spreader adjustment, regulated air and fluid pressures, viscosity for material used. Spray patterns and corrective adjustments.


 

 

(Airless Spray)

Principles of airless spraying: equipment required and procedures for use; pressures, head types for materials used. Precautions.


 

 

(Electrostatic)

Principles of electrostatic spraying: equipment and procedures; precautions.


8

Painting    Interior Work

Preparation

Trade finish specifications. Old and new surface preparation. Mill scale, rust and corrosion treatment; types and use of corrosion inhibiting materials. Paint receiving qualities of metals. Pre-paint treatment of galvanized metal. Old paint removal methods.


 

(Metal)

Priming Coat

Metal primer types and correct usage. Heat resisting paints, heat effects on light colours, conductivity. Brush, roller and spray application.


 

 

Second and Finish Coats

Paint and enamel types for metal finishing. Industrial colour code and piping code. Colour harmony; room finishes. Material costing. Brush, roller and spray application.


9

Painting    Interior Work

Preparation

Trade finish specifications. Absorptive qualities of concrete, brick, stone, concrete blocks. Moisture content, use of moisture meter. Use of acids and cleaning solutions. Neutralizing with zinc sulphate; litmus paper tests. Efflorescence treatment. Pointing and stopping materials and methods.


 

(Concrete and Masonry)

Priming Coat

Characteristics of polyvinyl acetate (P.V.A.), acrylic, oil and varnish sealers. Thinner types. Thinning and tinting primer coat. Application methods.


 

 

Second and Finish Coats

Determination of material quantities. Colour harmony. Concrete floor paints, thinner types and uses. P.V.A. and acrylic finishes. Multi-coloured paints and undercoats. Cement finishes. Correct brush, roller or spray application method for material used. Techniques for laying out and stripping concrete floors.


 

(Wood)

Preparation and Finishing

Wood and paint defects and condition, corrective action, surface preparation. Trade finish specifications and materials. Brush, roller or spray application procedures as required.


10

Painting    Exterior Work

Preparation

Specifications for finish type and number of coats. Cleaning and neutralizing. Efflorescence treatment. Crack repairs, pointing and stopping. Litmus paper and moisture meter tests.


 

(Concrete and Stucco)

Priming Coat

Use of P.V.A., acrylic, oil and varnish sealers, thinners. Consistency. Tinting colours. Brush, roller or spray application.


 

 

Finish Coat

Colour harmony. Application of P.V.A., acrylic, oil finishes, multi-coloured paints and their undercoats. Application methods and equipment for cement and stucco finishes. Material quantities.


 

(Wood)

Preparation and Finishing

Woods to paint or stain; weathering effects, causes of peeling, scaling, blistering. Testing and correction methods. Wood and surface preparation. Trade finish specifications and materials. Brush, roller and spray application procedures as required.


11

Painting    Exterior Work

Preparation

Hand and power metal cleaning. Sandblasting. Critical priming of bare metal. Rust and corrosion causes; chemical treatments, rust inhibiting materials. Galvanized metal treatment. Paint removal; use of alkaline and emulsion cleaners, passivating treatment, pH testing. Steam cleaning.


 

(Metal)

Priming Coat

Material specifications for exposure and environment. Antifouling paints. Red lead (and additives) primers; advantages, usage. Primers for aluminum, bright metals. Wash primers. Wetting ability. Drying time. Heat resisting paints for smoke stacks. Epoxies. Thinners, solvents, catalysts. Mixing and thinning procedures. Brush, roller and spray application.


 

 

Second or Finish Coat

Recoating requirements. Water and salt water effects on metals and paints. Suitable types of paints, enamels, lacquers, epoxies. Graphite paints. Metallic dust mixtures. Material application methods. Metal roof painting techniques. Field touch-up painting.


12

Special Coatings and Techniques

Epoxy and Urethane Compounds, Powdered Coatings (Inorganic Zinc)

Properties and characteristics of epoxyesters and “two-package” catalyzed epoxy finishes; urethane oils, moisture cured urethanes, “two-package” catalyzed urethanes; powdered coatings, special thinners required; various drying rates, pot-life. Mixing and application precautions. R.R.O. 1990, Reg. 1071, Sched. 1. SCHEDULE 2 Part I   PAINTER AND DECORATOR COMMERCIAL AND RESIDENTIAL WORK EXPERIENCE TRAINING  ITEM

COLUMN 1

COLUMN 2

COLUMN 3


 

Course

Subject

Work Experience Training


1

Trade Tools and Procedures    (As detailed in Schedule 1)

General

Safety rules and removal of all hazards. The Occupational Health and Safety Act. The Workers’ Compensation Act. Care and use of hand and power tools and equipment, including erection and use of ladders, scaffolds, swing stages, bosun’s chairs and related equipment, layout and measuring devices.


2

Trade Practices    (As detailed in Schedule 1)

Coating Materials

Familiarization with chemical properties, uses, drying characteristics of organic and synthetic coating materials. Paint failure causes and corrective action. Material formulation; mixing, colouring, reduction, straining and application techniques. Colour harmony; theory, styling and recognition. Matching and tinting. Paint systems.


 

 

Brush and Roller Work

Familiarization with brush types and purpose. Care and cleaning methods. Brushing techniques. Lining and striping. Roller application methods.


 

 

Spray Painting

Familiarization with conventional and airless (hydraulic) spray equipment; principles, components, uses, cleaning and maintenance. Spraying techniques; gun selection, pressures, material viscosity, spray patterns and adjustments. Mask use and servicing.


3

Interior Decorating    Painting, Varnishing, Lacquering

Preparation

Protection of floors, trim and furnishings. Trade finish specification. Repairing cracks and holes in wood, plaster, wallboard and concrete. Taping and filling wallboard joints. Neutralizing plaster, concrete and galvanized metal surfaces. Killing stains in wood and plaster. Knot treatment. Treating previously painted, papered or varnished surfaces. Use of paint and varnish removers; neutralizing operations. Sanding, scraping, stripping and sandblasting operations.


 

 

Sealing, Priming, Filling

Sizing new plaster. Sealer application. Priming wood, plaster, wallboard, concrete and metal. Use of oil, spirit and water stains and fillers. Bleaching agents. Application of concrete block fillers. Between coat sanding.


 

 

Undercoating and Finishing

Mixing, tinting, reduction and application of oil paints, enamels, varnishes, shellacs, lacquers, P.V.A. and acrylic finishes, multi-coloured paints, concrete floor paints, catalyzed finishes and cement finishes by brush, roller and spray methods.


4

Interior Decorating    Wall Coverings

Preparation and Application

Ceiling and wall preparation as required. Neutralizing and sizing. Cutting, fitting, pasting and hanging wallpaper. Fitting and finishing borders. Hanging panels, field, stiles and border.
Hanging decorator’s cotton, lining paper, fabrics, grass cloth, wood veneers and vinyls.


5

Interior Decorating    Special Finishes

Preparation and Application

Surface preparation as required. Wood graining operations. Blending, mottling, stippling, glazing and antiquing and texturing operations.
Marbling, veining and softening operations.


 

 

 

Marbling, veining and softening operations.


6

Exterior Work    Painting, Varnishing, Lacquering

Preparation

Trade finish specifications. Repairing cracks and holes in wood, stucco and concrete. Pointing and stopping. Treating previously painted or varnished surfaces; old finish removal by burning and chemical strippers.


 

 

 

Neutralizing and passivating treatments for wood, concrete and metal surfaces. Rust and corrosion treatment. Wire brushing, sanding, scraping and sandblasting operations. Wood preservative application. Knot treatment. Caulking. Fastening loose shingles.


 

 

Sealing, Priming, Filling

Priming wood, concrete, stucco and metal surfaces. Use of oil, spirit and water stains and fillers. Use of sealers and bleaching agents. Concrete block fillers. Between coat sanding.


 

 

Undercoating and Finishing

Mixing, tinting, reduction and application of oil paints, enamels, varnishes, lacquers, P.V.A. and acrylic finishes, heat resisting finishes, catalyzed materials, metallic dust mixtures, multi-coloured paints, cement finishes, by brush, roller and spray methods. Field touch-up painting.


7

Special Coatings and Techniques

Epoxy and Urethane Compounds

Mixing, use and application of epoxyesters and “two-package” catalyzed epoxy finishes; urethane oils, moisture cured urethanes, on other than steel surfaces. Part II   PAINTER AND DECORATOR INDUSTRIAL WORK EXPERIENCE TRAINING  ITEM

COLUMN 1

COLUMN 2

COLUMN 3


 

Course

Subject

Work Experience Training


1

Trade Tools and Procedures    (As detailed in Schedule 1)

General

Safety rules and removal of all hazards. The Occupational Health and Safety Act. The Workers’ Compensation Act. Care and use of hand and power tools and equipment, including erection and use of ladders, scaffolds, swing stages, bosun’s chairs and related equipment, sandblasting and spraying equipment, layout and measuring devices.


2

Trade Practices    (As detailed in Schedule 1)

Coating Materials

Familiarization with chemical properties, uses, drying characteristics of organic and synthetic coating materials. Protective coatings and selection factors. Paint failure causes and corrective action. Material formulation; mixing, colouring, reduction, straining and application techniques. Colour harmony; theory, styling and recognition. Matching and tinting. Paint systems.


 

 

Brush and Roller Work

Familiarization with brush types and purpose. Care and cleaning methods. Brushing techniques. Lining and striping. Roller application methods.


 

 

Spray Painting

Familiarization with conventional, airless (hydraulic), and electrostatic spray equipment; principles, components, uses, cleaning and maintenance. Spraying techniques; gun selection, pressures, material viscosity, spray patterns and adjustments. Mask use and servicing. Masking tape use.


3

Painting    Interior Work

Preparation 

Trade finish specifications. Old and new surface preparation. Mill scale, rust and corrosion treatment. Pre-paint treatment of galvanized metal. Old paint removal.


 

(Metal)

Priming Coat

Use of metal primers and heat resisting paints. Brush, roller and spray application.


 

 

Second and Finish Coats

Use of paint and enamels for metal finishing. Industrial colour code and piping code. Material costing. Brush, roller and spray application.


4

Painting    Interior Work

Preparation

Trade finish specifications. Use of moisture meter. Use of acids and cleaning solutions. Neutralizing with zinc sulphate; litmus paper tests. Efflorescence treatment. Pointing and stopping.


 

(Concrete and Masonry)

Priming Coat

Use of polyvinyl acetate (P.V.A.), acrylic, oil and varnish sealers. Thinning and tinting primer coat. Application.


 

 

Second and Finish Coats

Determination of material quantities. Use of concrete floor paints, P.V.A. and acrylic finishes, multicoloured paints and undercoats, cement finishes. Brush, roller or spray application. Laying out and stripping concrete floors.


 

(Wood)

Preparation and Finishing

Trade finish specifications. Recognition and correction of wood and paint condition defects. Surface preparation. Determination of material quantities. Brush, roller and spray application and finishing as required.


5

Painting    Exterior Work

Preparation

Specifications for finish and coats. Cleaning and neutralizing. Efflorescence treatment. Crack repairs, pointing and stopping. Litmus paper and moisture meter tests.


 

(Concrete and Stucco)

Priming Coat

Use of P.V.A., acrylic, oil and varnish sealers, thinners. Tinting colours. Brush, roller or spray application.


 

 

Finish Coat

Application of P.V.A., acrylic, oil finishes, multicoloured paints and their undercoats, cement and stucco finishes. Estimating material quantities.


 

(Wood)

Preparation and Finishing

Trade finish specifications. Recognition, testing and correction of wood and paint condition defects. Surface preparation. Determination of material quantities. Brush, roller and spray application and finishing as required.


6

Painting    Exterior Work    (Metal)

Preparation 

Hand and power metal cleaning. Sandblasting: critical priming requirements. Use of chemical treatments, rust inhibiting materials. Galvanized metal treatment. Paint removal; use of alkaline and emulsion strippers, passivating treatment, pH testing. Steam cleaning.


 

 

 

Material specifications. Use of antifouling paints, red lead (and additives) primers; primers for aluminum, bright metals; wash primers. Heat resisting paints for smoke stacks. Epoxies. Mixing and thinning. Brush, roller and spray application.


 

 

Second or Finish Coat

Suitable types of paints, enamels, lacquers, epoxies. Graphite paints. Metallic dust mixtures. Material application. Metal roof painting. Field touch-up painting.


7

Special Coatings and Techniques

Epoxy and Urethane Compounds, Powdered Coatings (Inorganic Zinc)

Mixing, use and application of epoxyesters and “two-package” catalyzed epoxy finishes; urethane oils, moisture cured urethanes, “two-package” catalyzed urethanes; powdered coatings. R.R.O. 1990, Reg. 1071, Sched. 2.