L 165/62
1.7.5.
EN
Official Journal of the European Union
29.6.2023
Sales literature Sales literature describing the machinery or related product shall not contradict the instructions for use as regards health and safety aspects.
Sales literature describing the performance characteristics of the machinery or related product shall contain the same information on emissions as is contained in the instructions for use.
2.
SUPPLEMENTARY ESSENTIAL HEALTH AND SAFETY REQUIREMENTS FOR CERTAIN CATEGORIES OF MACHINERY AND RELATED PRODUCTS
Machinery and related products for foodstuffs, machinery and related products for cosmetics or phar­ maceutical products, portable hand-held or hand-guided machinery and related products, portable fixing and other impact machinery and related products, machinery and related products for working wood and material with similar physical characteristics and machinery and related products for plant protection products application shall meet all the essential health and safety requirements set out in this chapter (see General Principles, point 4).
2.1.
Machinery and related products for foodstuffs and machinery and related products for cosmetics or pharmaceutical products
2.1.1.
General Machinery or related products intended for use with foodstuffs or with cosmetics or pharmaceutical products shall be designed and constructed in such a way as to avoid any risk of infection, sickness or contagion.
The following requirements shall be observed: (a) materials in contact with, or intended to come into contact with, foodstuffs or water intended for human consumption or cosmetics or pharmaceutical products shall satisfy the conditions laid down in the relevant Union legal acts; the machinery or related product shall be designed and constructed in such a way that these materials can be cleaned before each use and where this is not possible, disposable parts shall be used; (b) all surfaces in contact with foodstuffs or water intended for human consumption or cosmetics or phar­ maceutical products, other than surfaces of disposable parts, shall: (i) be smooth and have neither ridges nor crevices, which could harbour organic materials, and the same applies to their joinings; (ii) be designed and constructed in such a way as to reduce the projections, edges and recesses of assemblies to a minimum; (iii) be easily cleaned and disinfected, where necessary after removing easily dismantled parts; the inside surfaces shall have curves with a radius sufficient to allow thorough cleaning; (c) it shall be possible for liquids, gases and aerosols deriving from foodstuffs, cosmetics or pharmaceutical products as well as from cleaning, disinfecting and rinsing fluids to be completely discharged from the machinery or related product (if possible, in a ‘cleaning’ position); (d) machinery or related products shall be designed and constructed in such a way as to prevent any substances or living creatures, in particular insects, from entering, or any organic matter from accumu­ lating in, areas that cannot be cleaned; (e) machinery or related products shall be designed and constructed in such a way that no ancillary substances hazardous to health, including the lubricants used, can come into contact with foodstuffs or water intended for human consumption, cosmetics or pharmaceutical products; where necessary, machinery or related products shall be designed and constructed in such a way that continuing compliance with this requirement can be checked.