EN
L 135/80
Official Journal of the European Union
23.5.2023
(h) in point 3.1., point (a) is replaced by the following: ‘(a) Objective: On completion of a theoretical training course the student shall be able to demonstrate, to the levels identified in the Appendix III syllabus, the detailed theoretical knowledge of the aircraft’s applicable systems, structure, operations, maintenance, repair, and troubleshooting in accordance with maintenance data.
The student shall be able to demonstrate the use of manuals and approved procedures, including the knowledge of relevant inspections and limitations.’; (i)
in point 3.1.(d), the fourth paragraph is replaced by the following: ‘In addition, the course must describe and justify the following: — The minimum physical and/or virtual classroom attendance required of the trainee, in order to meet the objectives of the course. — The maximum number of hours of physical and/or virtual classroom training per day, taking into account pedagogical and human factors principles.’;
(j)
point 3.1.(e) is amended as follows: (i) the following paragraph is added after the second paragraph: ‘If it exists, the minimum syllabus of the operational suitability data (OSD), established in accordance with Regulation (EU) No 748/2012, shall be included.’; (ii) the table is amended as follows: — in level ‘Airframe structures’, chapter ‘27A Flight Control Surfaces (All)’ is deleted; — in level ‘Airframe systems’, the following chapter 47 is inserted after chapter 46:
’47
Nitrogen generation system
3
1
3
1
—
—
—
—
2‘
— in level ‘Airframe systems’, the following chapter ‘55/57 Flight control surfaces (All)’ is added after chapter 50: ‘55/57 Flight control surfaces (All)
3
1
3
1
—
—
—
—
1‘
(k) point 3.1.(f) is deleted; (l)
point 3.2.(b) is amended as follows: (i) the following paragraph is inserted between the third and fourth paragraphs: ‘If it exists, the minimum list of practical tasks of the operational suitability data (OSD), established in accordance with Regulation (EU) No 748/2012, shall be part of the practical elements to be selected.’; (ii) the table is amended as follows: — in level ‘Airframe structures’, chapter ‘27A Flight Control Surfaces’ is deleted; — in level ‘Airframe systems’, the following chapter 47 is inserted after chapter 46:
’47
Nitrogen generation system
X/X
X
X
X
X
X
X
—
—
—
X‘
— in level ‘Airframe systems’, the following chapter ‘55/57 Flight control surfaces’ is added after chapter 50: ‘55/57 Flight control surfaces
X/—
—
—
—
—
X
—
—
—
—
—‘