10.11.2022
EN
Official Journal of the European Union
L 290/439
3.2.4.6.
REESS charging and measuring the recharged electric energy
3.2.4.6.1.
The vehicle shall be connected to the mains within 120 minutes after the applicable WLTP test cycle n+1 in which the break-off criterion for the charge-depleting Type 1 test is reached for the first time.
The REESS is fully charged when the end-of-charge criterion, as defined in paragraph 2.2.3.2. of Appendix 4 to this annex, is reached.
3.2.4.6.2.
The electric energy measurement equipment, placed between the vehicle charger and the mains, shall measure the recharged electric energy EAC delivered from the mains, as well as its duration.
Electric energy measurement may be stopped when the end-of-charge criterion, as defined in paragraph 2.2.3.2. of Appendix 4 to this annex, is reached.
3.2.4.7.
Each individual applicable WLTP test cycle within the charge-depleting Type 1 test shall fulfil the applicable criteria emission limits according to paragraph 1.2. of Annex B6.
3.2.5.
Charge-sustaining Type 1 test with no subsequent charge-depleting Type 1 test (Option 2) The test sequence according to Option 2, as described in paragraphs 3.2.5.1. to 3.2.5.3.3. inclusive of this annex, as well as the corresponding REESS state of charge profile, are shown in Figure A8.App1/2 in Appendix 1 to this annex.
3.2.5.1.
Preconditioning and soaking The vehicle shall be prepared according to the procedures in paragraph 2.1. of Appendix 4 to this annex.
3.2.5.2.
Test conditions
3.2.5.2.1.
Tests shall be carried out with the vehicle operated in charge-sustaining operating condition as defined in paragraph 3.3.6. of this Regulation.
3.2.5.2.2.
Selection of a driver-selectable mode For vehicles equipped with a driver-selectable mode, the mode for the charge-sustaining Type 1 test shall be selected according to paragraph 3. of Appendix 6 to this annex.
3.2.5.3.
Type 1 test procedure
3.2.5.3.1.
Vehicles shall be tested according to the Type 1 test procedures described in Annex B6.
3.2.5.3.2.
If required, the CO2 emission shall be corrected according to Appendix 2 to this annex.
3.2.5.3.3.
The test according to paragraph 3.2.5.3.1. of this annex shall fulfil the applicable criteria emission limits according to paragraph 1.2. of Annex B6.
3.2.6.
Charge-depleting Type 1 test with a subsequent charge-sustaining Type 1 test (Option 3) The test sequence according to Option 3, as described in paragraphs 3.2.6.1. to 3.2.6.3. inclusive of this annex, as well as the corresponding REESS state of charge profile, are shown in Figure A8.App1/3 in Appendix 1 to this annex.
3.2.6.1.
For the charge-depleting Type 1 test, the procedure described in paragraphs 3.2.4.1. to 3.2.4.5. inclusive as well as paragraph 3.2.4.7. of this annex shall be followed.
3.2.6.2.
Subsequently, the procedure for the charge-sustaining Type 1 test described in paragraphs 3.2.5.1. to 3.2.5.3. inclusive of this annex shall be followed.
Paragraphs 2.1.1. and 2.1.2. of Appendix 4 to this annex shall not apply.
3.2.6.3.
REESS charging and measuring the recharged electric energy