EN
5.8.2022
Official Journal of the European Union
L 205/123
ANNEX IV
Annex Vb (Part-ML) to Commission Regulation (EU) No 1321/2014 is amended as follows: (1)
point (c) in point ML.A.302 is replaced by the following ‘(c) The AMP: (1) shall clearly identify the owner of the aircraft and the aircraft to which it relates, including any installed engine and propeller, as applicable; (2) shall include, alternatively: (a) the tasks or inspections contained in the applicable minimum inspection programme (MIP) referred to in point (d); (b) the instructions for continuing airworthiness (ICA) issued by the design approval holder (DAH); (c) the ICA issued by the declarant of a declaration of design compliance.’;
(2)
point ML.A.304 is replaced by the following: ‘ML.A.304 Data for modifications and repairs A person or organisation repairing an aircraft or a component shall assess any damage.
Modifications and repairs shall be carried out using the applicable data, that is, as appropriate: (a) approved by the Agency; (b) approved by a design organisation complying with Annex I (Part 21) to Regulation (EU) No 748/2012; (c) contained in the requirements referred to in point 21.A.90B or point 21.A.431B of Annex I (Part 21) to Regulation (EU) No 748/2012; (d) contained in the requirements referred to in point 21L.A.62, 21L.A.102, 21L.A.202 or 21L.A.222 of Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012; (e) declared by a declarant complying with Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012.’;
(3)
point (b) in point ML.A.401 is replaced by the following: ‘(b) For the purposes of this Annex, “applicable maintenance data” means any of the following: 1. any applicable requirement, procedure, standard or information issued by the competent authority or the Agency; 2. any applicable AD; 3. the applicable ICA and other maintenance instructions, issued by the type-certificate holder, supplemental type-certificate holder, declarant of a declaration of design compliance and any other organisation that publishes such data in accordance with Annex I (Part 21) or, as applicable, Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012; 4. for components approved for installation by the design approval holder or the declarant of a declaration of design compliance, the applicable maintenance instructions published by the component manufacturers and acceptable to the design approval holder or the declarant of a declaration of design compliance; 5. any applicable data issued in accordance with point 145.A.45(d).’;
(4)
point (a) in point ML.A.501 is replaced by the following: ‘(a) Unless otherwise specified in Subpart F of Annex I (Part-M), in Annex II (Part-145), in Annex Vd (Part-CAO) to this Regulation or in point 21.A.307 of Annex I (Part 21) or in point 21L.A.193 of Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012, a component may be fitted only if all of the following conditions are met: (i)
it is in a satisfactory condition;