10.3.2022
EN
Official Journal of the European Union
L 83/49
basis of that request CEN and Cenelec also revised harmonised standard EN 61010-2-061:2015 for laboratory atomic spectrometers with thermal atomization and ionization, reference of which is published by Commission Implementing Decision (EU) 2019/1956 (4).
This resulted in the adoption of the standard EN IEC 61010-2-061:2021 and its amendment EN IEC 61010-2-061:2021/A11:2021.
(5)
On the basis of the request M/511, CEN and Cenelec also amended and corrected the following harmonised standards, the references of which are published by Commission Communication (2016/C 249/03): EN 60598-2-13:2006 as amended by EN 60598-2-13:2006/A1:2012 and as corrected by EN 60598-2-13:2006/ AC:2006 for ground recessed luminaires; EN 61534-1:2011 as amended by EN 61534-1:2011/A1:2014 for powertrack systems; EN 61534-21:2014 for powertrack systems; EN 61534-22:2014 for powertrack systems; and EN 62135-1:2015 for resistance welding equipment.
This resulted in the adoption of the following amending harmonised standards and a correction: EN 60598-2-13:2006/A11:2021; EN 61534-1:2011/A11:2021; EN 61534-1:2011/A2:2021; EN 61534-21:2014/A11:2021; EN 61534-21:2014/A1:2021; EN 61534-22:2014/ A11:2021; EN 61534-22:2014/A1:2021; and EN 62135-1:2015/AC:2016.
(6)
The Commission, together with CEN and Cenelec, has assessed whether those harmonised standards and amendments and corrections thereto comply with the request M/511.
(7)
Harmonised standards EN IEC 61010-2-034:2021 as amended by EN IEC 61010-2-034:2021/A11:2021; EN 50520:2020 as amended by EN 50520:2020/A1:2021; EN 60898-2:2021; EN IEC 61010-2-051:2021 as amended by EN IEC 61010-2-051:2021/A11:2021; EN IEC 61010-2-061:2021 as amended by EN IEC 61010-2-061:2021/A11:2021; EN IEC 61010-2-030:2021 as amended by EN IEC 61010-2-030:2021/A11:2021; EN 60598-2-13:2006 as amended by EN 60598-2-13:2006/A1:2012 and EN 60598-2-13:2006/A11:2021 and as corrected by EN 60598-2-13:2006/AC:2006; EN 61534-1:2011 as amended by EN 61534-1:2011/A1:2014, EN 61534-1:2011/A11:2021 and EN 61534-1:2011/A2:2021; EN 61534-21:2014 as amended by EN 61534-21:2014/A11:2021 and EN 61534-21:2014/A1:2021; EN 61534-22:2014 as amended by EN 61534-22:2014/A11:2021 and EN 61534-22:2014/A1:2021; and EN 62135-1:2015 as corrected by EN 62135-1:2015/AC:2016 satisfy the safety objectives which they aim to cover and which are set out in Directive 2014/35/EU.
It is therefore appropriate to publish the references of those standards, and of the amendments and corrections thereto in the Official Journal of the European Union.
(8)
Implementing Decision (EU) 2019/1956 provides in its Annex I the references of harmonised standards conferring a presumption of conformity with Directive 2014/35/EU.
In order to ensure that the references of harmonised standards drafted in support of Directive 2014/35/EU are listed in one act, the references of those standards should be included in that Annex.
(9)
It is therefore necessary to withdraw the references of the following harmonised standards together with the references of any amending or correcting standards thereto published in the Official Journal of the European Union: EN 50520:2009; EN 60898-2:2006; EN 61010-2-051:2015; EN 61010-2-061:2015; EN 61010-2-030:2010; EN 60598-2-13:2006; EN 61534-1:2011; EN 61534-21:2014; EN 61534-22:2014 and EN 62135-1:2015.
(10)
Annex II to Implementing Decision (EU) 2019/1956 lists the references of harmonised standards drafted in support of Directive 2014/35/EU that are withdrawn from the C series of the Official Journal of the European Union.
It is therefore appropriate to include those references in that Annex.
However, given that reference of harmonised standard EN 61010-2-061:2015 is published in Annex IB to Implementing Decision (EU) 2019/1956, it is necessary to delete that reference from that Annex.
(11)
In order to give manufacturers sufficient time to prepare for application of harmonised standards EN 50520:2020 as amended by EN 50520:2020/A1:2021; EN 60898-2:2021; EN IEC 61010-2-051:2021 as amended by EN IEC 61010-2-051:2021/A11:2021; EN IEC 61010-2-061:2021 as amended by EN IEC 61010-2-061:2021/A11:2021; EN IEC 61010-2-030:2021 as amended by EN IEC 61010-2-030:2021/A11:2021; EN 60598-2-13:2006 as
(4) Commission Implementing Decision (EU) 2019/1956 of 26 November 2019 on the harmonised standards for electrical equipment designed for use within certain voltage limits and drafted in support of Directive 2014/35/EU of the European Parliament and of the Council (OJ L 306, 27.11.2019, p. 26).