Agreement between the European Economic Community and the Kingdom of Norway - Protocol No 1 concerning the treatment applicable to certain products - Protocol No 2 concerning products subject to special arrangements to take account of differrences in the cost of agricultural products incorporated therein - Protocol No 3 concerning the definition of the concept of "originating products" and methods of administrative cooperation - Protocol No 4 concerning certain provisions relating to Ireland - Final Act - Declarations
Date: 1973-05-14
Institutions: European Economic Community, Norway
Subjects: GATT, Norway, agricultural product, customs duties, trade agreement (EU), trading operation




L_1973171EN.01000201.xml










27.6.1973   


EN


Official Journal of the European Communities


L 171/2





AGREEMENT
between the European Economic Community and the Kingdom of Norway
THE EUROPEAN ECONOMIC COMMUNITY,
of the one part, and
THE KINGDOM OF NORWAY,
of the other part,
DESIRING to consolidate and to extend, upon the enlargement of the European Economic Community, the economic relations existing between the Community and Norway and to ensure, with due regard for fair conditions of competition, the harmonious development of their commerce for the purpose of contributing to the work of constructing Europe,
RESOLVED to this end to eliminate progressively the obstacles to substantially all their trade, in accordance with the provisions of the General Agreement on Tariffs and Trade concerning the establishment of free trade areas,
DECLARING their readiness to examine, in the light of any relevant factor, and in particular of developments in the Community, the possibility of developing and deepening their relations where it would appear to be useful in the interests of their economies to extend them to fields not covered by this Agreement,
HAVE DECIDED, in pursuit of these objectives and considering that no provision of this Agreement may be interpreted as exempting the Contracting Parties from the obligations which are incumbent upon them under other international agreements,
TO CONCLUDE THIS AGREEMENT:
Article 1
The aim of this Agreement is:






(a)


to promote through the expansion of reciprocal trade the harmonious development of economic relations between the European Economic Community and the Kingdom of Norway and thus to foster in the Community and in Norway the advance of economic activity, the improvement of living and employment conditions, and increased productivity and financial stability,










(b)


to provide fair conditions of competition for trade between the Contracting Parties,










(c)


to contribute in this way, by the removal of barriers to trade, to the harmonious development and expansion of world trade.




Article 2
The Agreement shall apply to products originating in the Community or Norway:






(i)


which fall within Chapters 25 to 99 of the Brussels Nomenclature, excluding the products listed in the Annex;










(ii)


which are specified in Protocol No 2 with due regard to the arrangements provided for in that Protocol.




Article 3
1.   No new customs duty on imports shall be introduced in trade between the Community and Norway.
2.   Customs duties on imports shall be progressively abolished in accordance with the following timetable:






(a)


on the date of entry into force of the Agreement each duty shall be reduced to 80 % of the basic duty;










(b)


four further reductions of 20 % each shall be made on:






 


1 January 1974,










 


1 January 1975,










 


1 January 1976,










 


1 July 1977.








Article 4
1.   The provisions concerning the progressive abolition of customs duties on imports shall also apply to customs duties of a fiscal nature.
The Contracting Parties may replace a customs duty of a fiscal nature or the fiscal element of a customs duty by an internal tax.
2.   Denmark, Ireland and the United Kingdom may retain until 1 January 1976 a customs duty of a fiscal nature or the fiscal element of a customs duty in the event of implementation of Article 38 of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’.
3.   Norway may retain temporarily and not beyond 31 December 1975, while observing the conditions of Article 18, a customs duty of a fiscal nature or the fiscal element of any such duty.
Article 5
1.   The basic duty to which the successive reductions provided for in Article 3 and in Protocol No 1 are to be applied shall, for each product, be the duty actually applied on 1 January 1972.
2.   If, after 1 January 1972, any tariff reductions resulting from the tariff agreements concluded as a result of the Trade Conference held in Geneva from 1964 to 1967 become applicable, such reduced duties shall replace the basic duties referred to in paragraph 1.
3.   The reduced duties calculated in accordance with Article 3 and Protocols Nos 1 and 2 shall be applied rounded to the first decimal place.
Subject to the application by the Community of Article 39 (5) of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’ as regards the specific duties or the specific part of the mixed duties in the Irish Customs Tariff, Article 3 and Protocols Nos 1 and 2 shall be applied, with rounding to the fourth decimal place.
Article 6
1.   No new charge having an effect equivalent to a customs duty on imports shall be introduced in trade between the Community and Norway.
2.   Charges having an effect equivalent to customs duties on imports introduced on or after 1 January 1972 in trade between the Community and Norway shall be abolished upon the entry into force of the Agreement.
Any charge having an effect equivalent to a customs duty on imports, the rate of which on 31 December 1972 is higher than that actually applied on 1 January 1972, shall be reduced to the latter rate upon the entry into force of the Agreement.
3.   Charges having an effect equivalent to customs duties on imports shall be progressively abolished in accordance with the following timetable:






(a)


by 1 January 1974 at the latest each charge shall be reduced to 60 % of the rate applied on 1 January 1972;










(b)


three further reductions of 20 % each shall be made on:






 


1 January 1975,










 


1 January 1976,










 


1 July 1977.








Article 7
1.   No customs duty on exports or charge having equivalent effect shall be introduced in trade between the Community and Norway.
Customs duties on exports and charges having equivalent effect shall be abolished not later than 1 January 1974.
Article 8
Protocol No 1 lays down the tariff treatment and arrangements applicable to certain products.
Article 9
Protocol No 2 lays down the tariff treatment and arrangements applicable to certain goods obtained by processing agricultural products.
Article 10
1.   In the event of specific rules being established as a result of the implementation of its agricultural policy or of any alteration of the current rules, the Contracting Party in question may adapt the arrangements resulting from this Agreement in respect of the products which are the subject of those rules or alterations.
2.   In such cases the Contracting Party in question shall take due account of the interests of the other Contracting Party. To this end the Contracting Parties may consult each other within the Joint Committee provided for in Article 29.
Article 11
Protocol No 3 lays down the rules of origin.
Article 12
A Contracting Party which is considering the reduction of the effective level of its duties or charges having equivalent effect applicable to third countries benefiting from most-favoured-nation treatment, or which is considering the suspension of their application, shall, as far as may be practicable, notify the Joint Committee not less than thirty days before such reduction or suspension comes into effect. It shall take note of any representations by the other Contracting Party regarding any distortions which might result therefrom.
Article 13
1.   No new quantitative restriction on imports or measures having equivalent effect shall be introduced in trade between the Community and Norway.
2.   Quantitative restrictions on imports shall be abolished on the date of entry into force of the Agreement and any measures having an effect equivalent to quantitative restrictions on imports shall be abolished not later than 1 January 1975.
Article 14
1.   The Community reserves the right to modify the arrangements applicable to the petroleum products falling within headings Nos 27.10, 27.11, 27.12, ex 27.13 (paraffin wax, micro-crystalline wax, or bituminous shale and other mineral waxes) and 27.14 of the Brussels Nomenclature upon adoption of a common definition of origin for petroleum products, upon adoption of decisions under the common commercial policy for the products in question or upon establishment of a common energy policy.
In this event the Community shall take due account of the interests of Norway; to this end it shall inform the Joint Committee, which shall meet under the conditions set out in Article 31.
2.   Norway reserves the right to take similar action should it be faced with like situations.
3.   Subject to paragraphs 1 and 2, the Agreement shall not prejudice the non-tariff rules applied to imports of petroleum products.
Article 15
1.   The Contracting Parties declare their readiness to foster, so far as their agricultural policies allow, the harmonious development of trade in agricultural products to which the Agreement does not apply.
2.   The Contracting Parties shall apply their agricultural rules in veterinary, health and plant health matters in a non-discriminatory fashion and shall not introduce any new measures that have the effect of unduly obstructing trade.
3.   The Contracting Parties shall examine, under the conditions set out in Article 31, any difficulties that might arise in their trade in agricultural products and shall endeavour to seek appropriate solutions.
Article 16
From 1 July 1977 products originating in Norway may not enjoy more favourable treatment when imported into the Community than that applied by the Member States of the Community between themselves.
Article 17
The Agreement shall not preclude the maintenance or establishment of customs unions, free-trade areas or arrangements for frontier trade, except in so far as they alter the trade arrangements provided for in the Agreement, in particular the provisions concerning rules of origin.
Article 18
The Contracting Parties shall refrain from any measure or practice of an internal fiscal nature establishing, whether directly or indirectly, discrimination between the products of one Contracting Party and like products originating in the territory of the other Contracting Party.
Products exported to the territory of one of the Contracting Parties may not benefit from repayment of internal taxation in excess of the amount of direct or indirect taxation imposed on them.
Article 19
Payments relating to trade in goods and the transfer of such payments to the Member State of the Community in which the creditor is resident, or to Norway, shall be free from any restrictions.
The Contracting Parties shall refrain from any exchange or administrative restrictions on the grant, repayment or acceptance of short and medium-term credits covering commercial transactions in which a resident participates.
Article 20
The Agreement shall not preclude prohibitions or restrictions on imports, exports or goods in transit justified on grounds of public morality, law and order or public security, the protection of life and health of humans, animals or plants, the protection of national treasures of artistic, historic or archaeological value, the protection of industrial and commercial property, or rules relating to gold or silver. Such prohibitions or restrictions must not, however, constitute a means of arbitrary discrimination or a disguised restriction on trade between the Contracting Parties.
Article 21
Nothing in the Agreement shall prevent a Contracting Party from taking any measures:






(a)


which it considers necessary to prevent the disclosure of information contrary to its essential security interests;










(b)


which relate to trade in arms, munitions or war materials or to research, development or production indispensable for defence purposes, provided that such measures do not impair the conditions of competition in respect of products not intended for specifically military purposes;










(c)


which it considers essential to its own security in time of war or serious international tension.




Article 22
1.   The Contracting Parties shall refrain from any measure likely to jeopardize the fulfilment of the objectives of the Agreement.
2.   They shall take any general or specific measures required to fulfil their obligations under the Agreement.
If either Contracting Party considers that the other Contracting Party has failed to fulfil an obligation under the Agreement, it may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 23
1.   The following are incompatible with the proper functioning of the Agreement in so far as they may affect trade between the Community and Norway:






(i)


all agreements between undertakings, decisions by associations of undertakings and concerted practices between undertakings which have as their object or effect the prevention, restriction or distortion of competition as regards the production of or trade in goods;










(ii)


abuse by one or more undertakings of a dominant position in the territories of the Contracting Parties as a whole or in a substantial part thereof;










(iii)


any public aid which distorts or threatens to distort competition by favouring certain undertakings on the production of certain goods.




2.   Should a Contracting Party consider that a given practice is incompatible with this Article, it may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 24
Where an increase in imports of a given product is, or is likely, to be seriously detrimental to any production activity carried on in the territory of one of the Contracting Parties and where this increase is due to:






(i)


the partial or total reduction in the importing Contracting Party, as provided for in the Agreement, of customs duties and charges having equivalent effect levied on the product in question; and










(ii)


the fact that the duties or charges having equivalent effect levied by the exporting Contracting Party on imports of raw materials or intermediate products used in the manufacture of the product in question are significantly lower than the corresponding duties or charges levied by the importing Contracting Party;




the Contracting Party concerned may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 25
If one of the Contracting Parties finds that dumping is taking place in trade with the other Contracting Party, it may take appropriate measures against this practice in accordance with the Agreement on Implementation of Article VI of the General Agreement on Tariffs and Trade, under the conditions and in accordance with the procedures laid down in Article 27.
Article 26
If serious disturbances arise in any sector of the economy or if difficulties arise which could bring about serious deterioration in the economic situation of a region, the Contracting Party concerned may take appropriate measures under the conditions and in accordance with the procedures laid down in Article 27.
Article 27
1.   In the event of a Contracting Party subjecting imports of products liable to give rise to the difficulties referred to in Articles 24 and 26 to an administrative procedure, the purpose of which is to provide rapid information on the trend of trade flows, it shall inform the other Contracting Party.
2.   In the cases specified in Articles 22 to 26, before taking the measures provided for therein or, in cases to which paragraph 3 (d) applies, as soon as possible, the Contracting Party in question shall supply the Joint Committee with all relevant information required for a thorough examination of the situation with a view to seeking a solution acceptable to the Contracting Parties.
In the selection of measures, priority must be given to those which least disturb the functioning of the Agreement.
The safeguard measures shall be notified immediately to the Joint Committee and shall be the subject of periodical consultations within the Committee, particularly with a view to their abolition as soon as circumstances permit.
3.   For the implementation of paragraph 2, the following provisions shall apply:






(a)


As regards Article 23, either Contracting Party may refer the matter to the Joint Committee if it considers that a given practice is incompatible with the proper functioning of the Agreement within the meaning of Article 23 (1).
The Contracting Parties shall provide the Joint Committee with all relevant information and shall give it the assistance it requires in order to examine the case and, where appropriate, to eliminate the practice objected to.
If the Contracting Party in question fails to put an end to the practice objected to within the period fixed by the Joint Committee, or in the absence of agreement in the Joint Committee within three months of the matter being referred to it, the Contracting Party concerned may adopt any safeguard measures it considers necessary to deal with the serious difficulties resulting from the practices in question; in particular it may withdraw tariff concessions.










(b)


As regards Article 24, the difficulties arising from the situation referred to in that Article shall be referred for examination to the Joint Committee, which may take any decision needed to put an end to such difficulties.
If the Joint Committee or the exporting Contracting Party has not taken a decision putting an end to the difficulties within thirty days of the matter being referred, the importing Contracting Party is authorized to levy a compensatory charge on the product imported.
The compensatory charge shall be calculated according to the incidence on the value of the goods in question of the tariff disparities in respect of the raw materials or intermediate products incorporated therein.










(c)


As regards Article 25, consultation in the Joint Committee shall take place before the Contracting Party concerned takes the appropriate measures.










(d)


Where exceptional circumstances requiring immediate action make prior examination impossible, the Contracting Party concerned may, in the situations specified in Articles 24, 25 and 26 and also in the case of export aids having a direct and immediate incidence on trade, apply forthwith the precautionary measures strictly necessary to remedy the situation.




Article 28
Where one or more Member States of the Community or Norway is in difficulties or is seriously threatened with difficulties as regards its balance of payments, the Contracting Party concerned may take the necessary safeguard measures. It shall inform the other Contracting Party forthwith.
Article 29
1.   A Joint Committee is hereby established which shall be responsible for the administration of the Agreement and shall ensure its proper implementation. For this purpose, it shall make recommendations and take decisions in the cases provided for in the Agreement. These decisions shall be put into effect by the Contracting- Parties in accordance with their own rules.
2.   For the purpose of the proper implementation of the Agreement the Contracting Parties shall exchange information and, at the request of either Party, shall hold consultations within the Joint Committee.
3.   The Joint Committee shall adopt its own rules of procedure.
Article 30
1.   The Joint Committee shall consist of representatives of the Community, on the one hand, and of representatives of Norway, on the other.
2.   The Joint Committee shall act by mutual agreement.
Article 31
1.   Each Contracting Party shall preside in turn over the Joint Committee, in accordance with the arrangements to be laid down in its rules of procedure.
2.   The Chairman shall convene meetings of the Joint Committee at least once a year in order to review the general functioning of the Agreement.
The Joint Committee shall, in addition, meet whenever special circumstances so require, at the request of either Contracting Party, in accordance with the conditions to be laid down in its rules of procedure.
3.   The Joint Committee may decide to set up any working party that can assist it in carrying out its duties.
Article 32
1.   Where a Contracting Party considers that it would be useful in the common interest of both Contracting Parties to develop the relations established by the Agreement by extending them to fields not covered thereby, it shall submit a reasoned request to the other Contracting Party.
The Contracting Parties may instruct the Joint Committee to examine this request and, where appropriate, to make recommendations to them, particularly with a view to opening negotiations. These recommendations may, where appropriate, aim at the attainment of a concerted harmonization, provided that the autonomy of decision of the two Contracting Parties is not impaired.
2.   The agreements resulting from the negotiations referred to in paragraph 1 will be subject to ratification or approval by the Contracting Parties in accordance with their own procedures.
Article 33
The Annex and Protocols to the Agreement shall form an integral part thereof.
Article 34
Either Contracting Party may denounce the Agreement by notifying the other Contracting Party. The Agreement shall cease to be in force twelve months after the date of such notification.
Article 35
The Agreement shall apply, on the one hand, to the territories to which the Treaty establishing the European Economic Community applies upon the terms laid down in that Treaty and, on the other, to the territory of the Kingdom of Norway.
Article 36
This Agreement is drawn up in duplicate in the Danish, Dutch, English, French, German, Italian and Norwegian languages, each of these texts being equally authentic.
This Agreement will be approved by the Contracting Parties in accordance with their own procedures.
It shall enter into force on 1 July 1973, provided that the Contracting Parties have notified each other before that date that the procedures necessary to this end have been completed.
After that date this Agreement shall enter into force on the first day of the second month following such notification. The final date for such notification shall be 30 November 1973.

Udfærdiget i Bruxelles, den fjortende maj nitten hundrede og treoghalvfjerds.
Geschehen zu Brüssel am vierzehnten Mai neunzehnhundertdreiundsiebzig.
Done at Brussels on this fourteenth day of May in the year one thousand nine hundred and seventy-three.
Fait à Bruxelles, le quatorze mai mil neuf cent soixante-treize.
Fatto a Bruxelles, addì quattordici maggio millenovecentosettantatré.
Gedaan te Brussel, de veertiende mei negentienhonderddrieënzeventig.
Utferdiget i Brussel, fjortende mai nitten hundre og syttitre.

På Rådet for De europæiske Fællesskabers vegne
Im Namen des Rates der Europäischen Gemeinschaften
In the name of the Council of the European Communities
Au nom du Conseil des Communautés européennes
A nome del Consiglio delle Comunità europee
Namens de Raad van de Europese Gemeenschappen





For Kongeriket Norge







ANNEX
List of products referred to in Article 2 of the Agreement






Brussels Nomenclature heading No


Description




35.02


Albumins, albuminates and other albumin derivatives:






A.


Albumins:






II.


Other:






(a)


Ovalbumin and lactalbumin:






1.


Dried (for example, in sheets, scales, flakes, powder)










2.


Other




















45.01


Natural cork, unworked, crushed, granulated or ground; waste cork




54.01


Flax, raw or processed but not spun: flax tow and waste (including pulled or garnetted rags)




57.01


True hemp (‘Cannabis sativa’), raw or processed but not spun; tow and waste of true hemp (including pulled or garnetted rags or ropes)







PROTOCOL No 1
concerning the treatment applicable to certain products
SECTION A
TREATMENT APPLICABLE TO IMPORTS INTO THE COMMUNITY OF CERTAIN PRODUCTS ORIGINATING IN NORWAY
Article 1
1.   Customs duties on imports into the Community as originally constituted of products falling within Chapters 48 or 49 of the Common Customs Tariff excluding heading No 48.09 (building board of wood pulp or of vegetable fibre, whether or not bonded with natural or artificial resins or with similar binders) shall be progressively abolished in accordance with the following timetable:







Timetable


Products falling within headings or subheadings Nos 48.01 C II, 48.01 E, 48.07 B, 48.13 or 48.15 B
Rates of duty applicable (percentage)


Other products
Percentage of basic duties applicable




On the date of entry into force of the Agreement


11·5


95




1 January 1974


11


90




1 January 1975


10·5


85




1 January 1976


10


80




1 July 1977


8


65




1 January 1979


6


50




1 January 1980


6


50




1 January 1981


4


35




1 January 1982


4


35




1 January 1983


2


20




1 January 1984


0


0




2.   Customs duties on imports into Ireland of products specified in paragraph 1 shall be progressively abolished in accordance with the following timetable:






Timetable


Percentage of basic duties applicable




On the date of entry into force of the Agreement


85




1 January 1974


70




1 January 1975


55




1 January 1976


40




1 July 1977


20




1 January 1979


15




1 January 1980


15




1 January 1981


10




1 January 1982


10




1 January 1983


5




1 January 1984


0




3.   Notwithstanding Article 3 of the Agreement, Denmark and the United Kingdom shall apply the following customs duties to imports of products specified in paragraph 1 which originate in Norway:







Timetable


Products falling within headings or subheadings Nos 48.01 C II, 48.01 E, 48.07 B, 48.13 or 48.15 B
Rates of duty applicable (percentage)


Other products
Percentage of Common Customs Tariff duty applicable




On the date of entry into force of the Agreement


0


0




1 January 1974


3


25




1 January 1975


4·5


37·5




1 January 1976


6


50




1 July 1977


8


65




1 January 1979


6


50




1 January 1980


6


50




1 January 1981


4


35




1 January 1982


4


35




1 January 1983


2


20




1 January 1984


0


0




4.   During the period from 1 January 1974 to 31 December 1983, Denmark and the United Kingdom shall be entitled to open each year, for imports of products originating in Norway, zero-duty tariff quotas the amounts of which, shown in Annex A for 1974, shall be equal to the average amount of imports between 1968 and 1971 raised cumulatively by four increases of 5 %; after 1 January 1975 the amount of these tariff quotas shall be raised annually by 5 %.
5.   During the period from the date of entry into force of the Agreement to 31 December 1982 Ireland shall be entitled to open each year, for imports of products originating in Norway and falling within headings No 48.01 to 48.07, zero-duty tariff quotas until 31 December 1980, and 2 % duty tariff quotas subsequently, the basic amounts of which shall be equal to the average amount of imports between 1968 and 1971 raised annually by 5 % between 1974 and 1976.
The basic amounts of these tariff quotas are shown in Annex B. For 1973 these amounts shall be reduced pro rata according to the date of entry into force of the Agreement.
6.   The expression ‘the Community as originally constituted’ means the Kingdom of Belgium, the Federal Republic of Germany, the French Republic, the Italian Republic, the Grand Duchy of Luxembourg and the Kingdom of the Netherlands.
Article 2
1.   Customs duties on imports into the Community as originally constituted and into Ireland of the products specified in paragraph 2 shall be progressively reduced to the following levels in accordance with the following timetable:








Timetable


Percentage of basic duties applicable




On the date of entry into force of the Agreement


 


95


 




1 January 1974


 


90


 




1 January 1975


 


5


 




1 January 1976


 


75


 




1 January 1977


 


60


 




1 January 1978


 


40


with a maximum of 3 % ad valorem (except subheading No 79.01 A)




1 January 1979


 


30


for subheading No 28.56 A




20


for other products




1 January 1980


 


0


 




For tariff subheading No 79.01 A, listed in the table given in paragraph 2, the tariff reductions shall be made, as regards the Community as originally constituted and notwithstanding Article 5 (3) of the Agreement, rounded to the second decimal place.
2.   The products referred to in paragraph 1 are the following:






CCT heading No


Description




28.56


Carbides (for example, silicon carbide, boron carbide, metal carbides):






A.


Of silicon








56.01


Man-made fibres (discontinuous), not carded, combed or otherwise prepared for spinning:






B.


Regenerated textile fibres








56.02


Continuous filament for the manufacture of man-made fibres (discontinuous):






B.


Of regenerated textile fibres








ex 73.02


Ferro-alloys, excluding ferro-nickel and products covered by the ECSC Treaty




77.01


Unwrought magnesium: magnesium waste (excluding shavings of uniform size) and scrap:






A.


Unwrought








79.01


Unwrought zinc; zinc waste and scrap:






A.


Unwrought








Article 3
Customs duties on imports into the Community as originally constituted and into Ireland of the products falling within subheading No 76.01 A and of headings Nos 76.02 and 76.03 of the Common Customs Tariff shall be progressively reduced to the following levels in accordance with the following timetable:







Timetable


Rates of duty applicable percentage ad valorem





Headings Nos 76.02 and 76.03


Subheading No 76.01 A




On the date of entry into force of the Agreement


11·4


6·6




1 January 1974


10·8


6·3




1 January 1975


10·2


5·9




1 January 1976


9


5·6




1 January 1977


7·2


4·2




1 January 1978


3


3




1 January 1979


2·7


2·7




1 January 1980


0


0




Article 4
Imports to which the tariff treatment provided for in Articles 1, 2 and 3 applies shall be subjected to annual indicative ceilings above which the customs duties applicable in respect of third countries may be reintroduced in accordance with the following provisions:






(a)


Taking into account the Community's right to suspend application of ceilings for certain products, the basic amounts for fixing the ceilings for 1973 are shown in Annex C. The ceilings for 1973 are calculated by reducing the basic amounts pro rata according to the date of entry into force of the Agreement.
From 1974 on the level of the ceilings shall correspond to the basic amounts for 1973 increased annually by a compound rate of 5 %, with the exception that for subheading No 76.01 A· the annual rates of increase shall be the following:






1974


3 %




1975


3 %




1976


3 %




1977


5 %




1978


5 %




1979


10 %




1980


10 %




1981


10 %




For products covered by this Protocol but not included in that Annex, the Community reserves the right to introduce ceilings of which the level will be equal to the average amount of imports into the Community over the last four years for which statistics are available, increased by 5 %; for the following years, the levels of these ceilings shall be raised annually by 5 %.










(b)


Should, for two successive years, imports of a product subject to a ceiling be less than 90 % of the level fixed, the Community shall suspend the application of this ceiling.










(c)


In the event of short-term economic difficulties, the Community reserves the right, after consultation within the Joint Committee, to maintain for a year the level fixed for the preceding year.










(d)


On 1 December each year the Community shall notify the Joint Committee of the list of products subject to ceilings in the following year and of the levels of the ceilings.










(e)


Imports under the tariff quotas opened in accordance with Article 1 (4) and (5) shall also be set off against the ceiling levels fixed for the same products.










(f)


Notwithstanding Article 3 of the Agreement and Articles 1, 2 and 3 of this Protocol, when a ceiling fixed for imports of a product covered by this Protocol is reached, Common Customs Tariff duties on imports of the product in question may be reimposed until the end of the calendar year.
In this event, prior to 1 July 1977:






—


Denmark and the United Kingdom shall reimpose customs duties as follows:






Years


Percentage of Common Customs Tariff duties applicable




1974


40




1975


60




1976


80














—


Ireland shall reimpose customs duties applicable to third countries.




The customs duties specified in Articles 1,2 and 3 of this Protocol shall be reintroduced on 1 January of the following year.










(g)


After 1 July 1977 the Contracting Parties shall examine within the Joint Committee the possibility of revising the percentage by which the levels of ceilings are raised, having regard to the trend of consumption and imports in the Community and to experience gained in applying this Article.










(h)


The ceilings shall be abolished at the end of the tariff-dismantling periods provided for in Articles 1, 2 and 3 of this Protocol, with the exception that for subheading No 76.01 A the ceilings shall be abolished on 31 December 1981.




SECTION B
TREATMENT APPLICABLE TO IMPORTS INTO NORWAY OF CERTAIN PRODUCTS ORIGINATING IN THE COMMUNITY
Article 5
1.   Customs duties on imports into Norway from the Community as originally constituted and from Ireland of the products listed in Annex D shall be progressively reduced to the following levels in accordance with the following timetable:






Timetable


Percentage of basic duties applicable




On the date of entry into force of the Agreement


95




1 January 1974


90




1 January 1975


85




1 January 1976


80




1 July 1977


65




1 January 1979


50




1 January 1980


50




1 January 1981


35




1 January 1982


35




1 January 1983


20




1 January 1984


0




2.   Customs duties on imports into Norway from the Community as originally constituted and from Ireland of the products listed in Annex E shall be progressively reduced to the following levels in accordance with the following timetable:






Timetable


Percentage of basic duties applicable




On the date of entry into force of the Agreement


95




1 January 1974


90




1 January 1975


85




1 January 1976


75




1 January 1977


60




1 January 1978


40




1 January 1979


20




1 January 1980


0




Article 6
For products covered by section B of this Protocol, Norway reserves the right, in the event of it becoming absolutely necessary at a later stage and following consultations within the Joint Committee, to introduce indicative ceilings as defined in Section A of this Protocol, the methods applied to which will be the same as those mentioned therein. For imports exceeding the ceilings, customs duties not exceeding those applicable in respect of third countries may be reintroduced.

ANNEX A
List of tariff quotas for 1974
DENMARK, UNITED KINGDOM








CCT heading No


Description


Level (in metric tons)




Denmark


United Kingdom




Chapter 48


PAPER AND PAPERBOARD; ARTICLES OF PAPER PULP, OF PAPER OR OF PAPERBOARD


 


 




48.01


Paper and paperboard (including cellulose wadding), machine-made, in rolls or sheets:


 


 










C.


Kraft paper and kraft board:






 


 










II.


Other:






 


 










—


Kraft liner






303


7 669










—


Kraft paper for large bags






2 615


15 428










—


Other






2 391


15 138










ex E.


Other:






 


 










—


Bible paper (India paper), copying tissue; other printing paper and other writing paper, not containing mechanical wood pulp or in which mechanical wood pulp does not represent more than 5 %






7 484


15 419










—


Printing paper and writing paper, containing mechanical wood pulp, excluding copying tissue






8 460


27 192










—


Fluting paper for corrugated paperboard






558


21 108










—


Sulphite paper for wrapping purposes






1 208


12 582










—


Other, excluding cellulose wadding and tissues






4 855


—










—


Other paper






—


12 168










—


Other paperboard






—


10 903




48.03


Parchment or greaseproof paper and paperboard, and imitations thereof, and glazed transparent paper, in rolls or sheets


2 495


18 433




48.04


Composite paper or paperboard (made by sticking flat layers together with an adhesive), not surface-coated or impregnated, whether or not internally reinforced, in rolls or sheets


304


—




48.05


Paper and paperboard, corrugated (with or without flat surface sheets), creped, crinkled, embossed or perforated, in rolls or sheets:


 


 










B.


Other






573


—




48.07


Paper and paperboard, impregnated, coated, surface-coloured, surface-decorated or printed (not being merely ruled, lined or squared and not constituting printed matter within Chapter 49), in rolls or sheets:


 


 










B.


Other:






 


 










—


Coated printing or writing paper






1 694


5 988










—


Other






5 132




48.15


Other paper and paperboard, cut to size or shape:


 


 










B.


Other






1 218


—




48.16


Boxes, bags and other packing containers, of paper or paperboard


1 011


—




48.21


Other articles of paper pulp, paper, paperboard or cellulose wadding:


 


 










B.


Other






231


—




ex Chapter 48


Other products of Chapter 48, excluding products of subheading No 48.01 A and heading 48.09


1 000


7 399




ex Chapter 49


Printed books, newspapers, pictures and other products of the printing industry; manuscripts, typescripts and plans — subject to customs duties in the Common Customs Tariff (headings Nos 49.03, 49.05 A, 49.07 A, 49.07 C II, 49.08, 49.09, 49.10, 49.11 B)


175


45 396 (1)







(1)  In sterling.


ANNEX B
List of tariff quotas for 1973
IRELAND







CCT heading No


Description


Level (in metric tons)




48.01


Paper and paperboard (including cellulose wadding), machine-made, in rolls or sheets:


 










C.


Kraft paper and kraft board:






 










II.


Other:






 










—


Kraft paper for large bags






2 058










ex E.


Other:






 










—


Printing paper and writing paper containing mechanical wood pulp, excluding copying tissue






61










—


Sulphite paper for wrapping purposes






1·7










—


Other, excluding cellulose wadding and tissues






435·5










—


Other paper and paperboard of heading No 48.01, excluding subheading No 48.01 A and products subject to ceilings






398·4




48.05


Paper and paperboard, corrugated (with or without flat surface sheets), creped, crinkled, embossed or perforated, in rolls or sheets:


 










B.


Other






4 008




48.07


Paper and paperboard, impregnated, coated, surface-coloured, surface-decorated or printed (not being merely ruled, lined or squared and not constituting printed matter within Chapter 49), in rolls or sheets:


 










B.


Other:






 










—


Coated printing or writing paper






484










—


Other






965·5






ANNEX C
Basic amounts for 1973







CCT heading No


Description


Basic amount (in metric tons)




28.56


Carbides (for example, silicon carbide, boron carbide, metal carbides):


 










A.


Of silicon






34 500




48.01


Paper and paperboard (including cellulose wadding), machine-made, in rolls or sheets:


 










C.


Kraft paper and kraft board:






 










II.


Other:






 










—


Kraft liner






15 000










—


Kraft paper for large bags






28 500










—


Other






27 000










ex E.


Other:






 










—


Bible paper (India paper), copying tissue; other printing paper and other writing paper, not containing mechanical wood pulp or in which mechanical wood pulp does not represent more than 5 %






35 000










—


Printing paper and writing paper, containing mechanical wood pulp, excluding copying tissue






114 000










—


Fluting paper for corrugated paperboard






43 500










—


Sulphite paper for wrapping purposes






20 000










—


Other, excluding cellulose wadding and tissues






33 000




48.03


Parchment or greaseproof paper and paperboard, and imitations thereof, and glazed transparent paper, in rolls or sheets


21 000




48.07


Paper and paperboard, impregnated, coated, surface-coloured, surface-decorated or printed (not being merely ruled, lined or squared and not constituting printed matter within Chapter 49), in rolls or sheets:


 










ex B.


Other:






 










—


Other, excluding coated printing or writing paper






22 000




73.02


Ferro-alloys:


 










A.


Ferro-manganese:






135 000










II.


Other














D.


Ferro-silico-manganese














C.


Ferro-silicon






180 000










E.


Ferro-chromium and ferro-silico-chromium






23 000










ex G.


Other:






 










—


Ferro-vanadium






490










—


Other, excluding ferro-molybdenum






11 000




76.01


Unwrought aluminium; aluminium waste and scrap:


 










A.


Unwrought






190 000




76.02


Wrought bars, rods, angles, shapes and sections, of aluminium; aluminium wire


12 000




76.03


Wrought plates, sheets and strip, of aluminium


18 000






ANNEX D






Norwegian Customs Tariff heading No


Description




ex 51.04


Woven fabrics of man-made fibres (continuous), including woven fabrics of monofil or strip of heading No 51.01 or 51.02, excluding cord fabrics and those for use in the industry for production of clothing




53.10


Yarn of sheep's or lambs' wool, of horsehair or of other animal hair (fine or coarse) put up for retail sale




ex 53.11


Woven fabrics of sheep's or lambs' wool or of fine animal hair, excluding those for use in the industry for production of clothing




54.05


Woven fabrics of flax or ramie




55.06


Cotton yarn, put up for retail sale




55.08


Terry towelling and similar terry fabrics, of cotton




ex 55.09


Other woven fabrics of cotton, excluding those for use in the industry for production of clothing




56.06


Yarn of man-made fibres (discontinuous or waste), put up for retail sale




ex 56.07


Woven fabrics of man-made fibres (dicontinuous or waste), excluding those for use in the industry for production of clothing




ex 58.04


Woven pile fabrics and chenille fabrics (other than terry towelling or similar terry fabrics of cotton falling within heading No 55.08 and fabrics falling within heading No 58.05) excluding those for use in the industry for production of clothing:






A.


Containing continuous man-made textile fibres










B.


Other:






1.


Of wool












58.05


Narrow woven fabrics and narrow fabrics (bolduc) consisting of warp without weft assembled by means of an adhesive, other than goods falling within heading No 58.06:






A.


Containing silk or continuous man-made textile fibres










B.


Other:






2.


Other












58.06


Woven labels, badges and the like, not embroidered, in the piece, in strips or cut to shape or size




58.07


Chenille yarn (including flock chenille yarn), gimped yarn (other than metallized yarn of heading No 52.01 and gimped horsehair yarn); braids and ornamental trimmings in the piece; tassels, pompons and the like




58.09


Tulle and other net fabrics (but not including woven, knitted or crocheted fabrics), figured; hand or mechanically made lace, in the piece, in strips or in motifs




59.01


Wadding and articles of wadding; textile flock and dust and mill neps:






A.


Sanitary towels and pads










C.


Other








59.02


Felt and articles of felt, whether or not impregnated or coated:






B.


Other felt










C.


Articles of felt








59.03


Bonded fibre fabrics, similar bonded yarn fabrics, and articles of such fabrics, whether or not impregnated or coated




59.04


Twine, cordage, ropes and cables, plaited or not:






A.


Plaited










B.


Other:






1.


Containing continuous man-made textile fibres










2.


Other:






(a)


Of cotton or jute










(b)


Of other materials:






2.


Other




















ex 59.08


Textile fabrics impregnated, coated, covered or laminated with preparations of cellulose derivatives or of other artificial plastic materials excluding those for use in the industry for production of clothing:






B.


Other








59.13


Elastic fabrics and trimmings (other than knitted or crocheted goods) consisting of textile materials combined with rubber threads




59.15


Textile hosepiping and similar tubing, with or without lining, armour or accessories of other materials




ex 60.01


Knitted or crocheted fabrics, not elastic or rubberized, excluding those for use in the industry for production of clothing




60.03


Stockings, under stockings, socks, ankle-socks, sockettes and the like, knitted or crocheted, not elastic or rubberized




60.04


Under garments, knitted or crocheted, not elastic or rubberized




60.05


Outer garmets and other articles, knitted or crocheted, not elastic or rubberized




61.01


Men's and boys' outer garments:






B.


Trimmed with fur










C.


Garments of which the chief constituent material contains silk or continuous man-made textile fibres










D.


Other








61.02


Women's, girls' and infants' outer garments




61.03


Men's and boys' under garments, including collars, shirt fronts and cuffs




61.04


Women's, girls' and infants' under garments




61.07


Ties, bow ties and cravats




61.09


Corsets, corset-belts, suspender-belts, brassieres, braces, suspenders, garters and the like (including such articles of knitted or crocheted fabric), whether or not elastic




62.01


Travelling rugs and blankets




62.02


Bed linen, table linen, toilet linen and kitchen linen; curtains and other furnishing articles




64.01


Footwear with outer soles and uppers of rubber or artificial plastic material




ex 85.15


Receivers for colour television






ANNEX E






Norwegian Customs Tariff heading No


Description




33.06


Perfumery, cosmetics and toilet preparations




36.01


Propellent powders




36.02


Prepared explosives, other than propellent powders




36.03


Mining, blasting and safety fuses




39.01


Condensation, polycondensation and polyaddition products, whether or not monified or polymerized, and whether or not linear (for example, phenoplasts, aminoplasts, alkyds, polyallyl esters and other unsaturated polyesters, silicones):






C.


Other








39.02


Polymerization and copolymerization products (for example, polyethylene, polytetrahaloethylenes, polyisobutylene, polystyrene, polyvinyl chloride, polyvinyl acetate, polyvinyl chloroacetate and other polyvinyl derivatives and polymethacrylic derivatives, coumarone-indene resins):






A.


Polyethylene imported in the forms specified in Note 3 (a), (b) and (e) to this Chapter










ex B.


Paving tiles containing at least 60 % of mineral extenders, excluding polypropylene and polyacrylic










ex C.


Other floor coverings, excluding polypropylene and polyacrylic










ex E.


Artificial sausage casings, excluding polypropylene and polyacrylic










ex F.


Other, excluding polypropylene and polyacrylic








39.03


Regenerated cellulose; cellulose nitrate, cellulose acetate and other cellulose esters, cellulose ethers and other chemical derivatives of cellulose, plasticized or not (for example, collodions, celluloid); vulcanized fibre:






A.


Vulcanized fibre:






2.


Other














B.


Collodion cotton, gun cotton and collodion










C.


Other:






1.


Unworked:






(a)


Cellulose acetate moulding powders










(c)


Other














2.


Worked:






(b)


Sponges










(c)


Other
















39.04


Hardened proteins (for example, hardened casein and hardened gelatin):






A.


Artificial sausage casings








39.05


Natural resins modified by fusion (run gums); artificial resins obtained by esterification of natural resins or of resinic acids (ester gums); chemical derivatives of natural rubber (for example, chlorinated rubber, rubber hydrochloride, oxidized rubber, cyclized rubber)




39.06


Other high polymers, artificial resins and artificial plastic materials, including alginic acid, its salts and esters; linoxyn




39.07


Articles of materials of the kinds described in heading Nos 39.01 to 39.06:






B.


Artificial sausage casings










C.


Bags and similar packaging articles of film falling within heading No 39.03; lamps and parts thereof










D.


Viscose sponges










E.


Transmission, conveyor and elevator belts and belting










F.


Other








40.09


Piping and tubing of unhardened vulcanized rubber:




40.10


Transmission, conveyor or elevator belts or belting, of vulcanized rubber




40.11








ex A.


Pneumatic tyres for motor vehicles, aircraft and cycles, excluding tyres for motor-cycles, motor-scooters and tractors; inner tubes for motor vehicles and tractors; flaps and solid tyres for motor vehicles










B.


Other








40.14


Other articles of unhardened vulcanized rubber:






B.


Other








48.21


Other articles of paper pulp, paper, paperboard or cellulose wadding:






A.


Lampshades; moulded sheets for packing eggs, of paper pulp










D.


Other








58.02


Other carpets, carpeting, rugs, mats and matting, and ‘Kelem’, ‘Schumacks’ and ‘Karamanie’ rugs and the like (made up or not)




59.10


Linoleum and materials prepared on a textile base in a similar manner to linoleum, whether or not cut to shape or of a kind used as floor coverings; floor coverings consisting of a coating applied on a textile base, cut to shape or not:






B.


Other








64.02


Footwear with outer soles of leather or composition leather; footwear (other than footwear falling within heading No 64.01) with outer soles of rubber or artificial plastic material




69.11


Tableware and other articles of a kind commonly used for domestic or toilet purposes, of porcelain or china (including biscuit porcelain and parian)




69.12


Tableware and other articles of a kind commonly used for domestic or toilet purposes, of other kinds of pottery




70.05


Unworked drawn or blown glass (including flashed glass), in rectangles




70.06


Cast, rolled, drawn or blown glass (including flashed or wired glass) in rectangles, surface-ground or polished, but not further worked




70.07


Cast, rolled, drawn or blown glass (including flashed or wired glass) cut to shape other than rectangular shape, or bent or otherwise worked (for example, edge worked or engraved), whether or not surface-ground or polished; multiple-walled insulating glass; leaded lights and the like




70.08


Safety glass consisting of toughened or laminated glass, shaped or not




70.09


Glass mirrors (including rear-view mirrors), unframed, framed or backed






B.


Other








ex 70.13


Glassware (other than articles falling within heading No 70.19) of a kind commonly used for table, kitchen, toilet or office purposes, for indoor decoration or for similar uses, excluding articles of crystal (of a content of minimum 24 % of lead oxides and of a density equal to or above 2-9), hand made or mechanically made, cut or not, decorated or not




70.14


Illuminating glassware, signalling glassware and optical elements of glass, not optically worked nor of optical glass




73.17


Tubes and pipes, of cast iron:






A.


Finned










B.


Soil pipes








73.18


Tubes and pipes and blanks therefor, of iron (other than of cast iron) or steel, excluding high-pressure hydro-electric conduits:






A.


With riveted or folded edges










B.


Other:






ex 1.


Of a wall thickness of more than 1·8 mm, excluding seamless tubes and pipes












73.20


Tube and pipe fittings (for example, joints elbows, unions and flanges), of iron or steel:






A.


Soil-pipe fittings








73.38


Articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of iron or steel:






A.


Articles of a kind commonly used for domestic purposes:






2.


Other














B.


Sanitary ware for indoor use:






2.


Other












76.02


Wrought bars, rods, angles, shapes and sections, of aluminium; aluminium wire:






B.


Other








76.03


Wrought plates, sheets and strip, of aluminium:






B.


Other








82.04


Hand tools, including glaziers' diamonds, not falling within any other heading of this Chapter; blow lamps, anvils, vices and clamps, other than accessories for, and parts of machine tools; portable forges; grinding wheels mounted on frameworks (hand or pedal operated)




82.07


Tool-tips and plates, sticks and the like for tool-tips, unmounted, of sintered metal carbides (for example, carbides of tungsten, molybdenum or vanadium)




82.09


Knives with cutting blades, serrated or not (including pruning knives), other than knives falling within heading No 82.06




82.14


Spoons, forks, fish-eaters, butter-knives, ladles, and similar kitchen or tableware




83.01


Locks and padlocks (key, combination or electrically operated), and parts thereof, of base metal; frames incorporating locks, for handbags, trunks or the like, and parts of such frames, of base metal; keys for any of the foregoing articles, finished or not, of base metal




83.02


Base metal fittings and mountings of a kind suitable for furniture, doors, staircases, windows, blinds, coachwork, saddlery, trunks, caskets and the like (including automatic door closers), base metal hat-racks, hat-pegs, brackets and the like




84.15


Refrigerators and refrigerating equipment (electrical and other):






ex A.


Combined refrigerators and freezers of a capacity of not more than 0·284 cubic metre










ex C.


Freezers and combined refrigerators and freezers








84.47


Machine-tools for working wood, cork, bone, ebonite (vulcanite), hard artificial plastic materials or other hard carving materials, other than machines falling within heading No 84.49:






B.


Multi-spindle boring and drilling machines










C.


Morticing and tenoning machines for working wood










D.


Other








84.61


Taps, cocks, valves and similar appliances, for pipes, boiler shells, tanks, vats and the like including pressure reducing valves and thermostatically controlled valves




85.04


Electric accumulators




85.12


Electric instantaneous or storage water heaters and immersion heaters; electric soil heating apparatus and electric space heating apparatus; electric hair dressing appliances (for example hair dryers, hair curlers, curling tong heaters) and electric smoothing irons; electrothermic domestic appliances; electric heating resistors, other than those of carbon:






B.


Other








85.23


Insulated (including enamelled or anodized) electric wire, cable, bars, strip and the like (including coaxial cable), whether or not fitted with connectors




85.25


Insulators of any material




85.26


Insulating fittings for electrical machines, appliances or equipment, being fittings wholly of insulating material apart from any minor components of metal incorporated during moulding solely for purposes of assembly, but not including insulators falling within heading No 85.25




87.05


Bodies (including cabs) for the motor vehicles falling within heading No 87.01, 87.02 or 87.03:






B.


For motor vehicles for the transport of persons, including motor buses










C.


Other








87.09


Motor-cycles, auto-cycles and cycles fitted with an auxiliary motor, with or without side-cars; side-cars of all kinds




87.10


Cycles (including delivery tricycles), not motorized




87.13


Baby carriages and invalid carriages (other than motorized or otherwise mechanically propelled) and parts thereof:






A.


Baby carriages and parts thereof








90.28


Electrical measuring, checking, analyzing or automatically controlling instruments and apparatus:






A.


Echo-sounding instruments and asdic apparatus








92.11


Gramophones, dictating machines and other sound recorders and reproducers, including record-players and tape decks, with or without sound-heads; television image and sound recorders and reproducers, magnetic




94.03


Other furniture and parts thereof:






A.


Of steel:






1.


Nickel- or chromium-plated












96.02


Other brooms and brushes (including brushes of a kind used as parts of machines); paint rollers; squeegees (other than roller squeegees) and mops




98.01


Buttons and button moulds, studs, cuff-links, and press-fasteners, including snap-fasteners and press-studs; blanks and parts of such articles




98.02


Slide fasteners and parts thereof








PROTOCOL No 2
concerning products subject to special arrangements to take account of differrences in the cost of agricultural products incorporated therein
Article 1
In order to take account of differneces in the cost of the agricultural products incorporated in the goods specified in the Tables annexed to this Protocol, the Agreement does not preclude:






(i)


the levying, upon import, of a variable component or fixed amount, or the application of internal price compensation measures;










(ii)


the application of measures adopted upon export.




Article 2
1.   For the products specified in the Tables annexed to this Protocol the basic duties shall be:






(a)


for the Community as originally constituted: the duties actually applied on 1 January 1972;










(b)


for Denmark, Ireland and the United Kingdom:






(i)


in respect of products covered by Regulation (EEC) No 1059/69:






—


for Ireland, on the one hand,










—


for Denmark and the United Kingdom on the other hand, in respect of products not covered by the Convention establishing the European Free Trade Association:




the customs duties resulting from Article 47 of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’; the Joint Committee shall be informed of these basic duties in good time and in any case before the first reduction provided for in paragraph 2;










(ii)


in respect of the other products: the duties actually applied on 1 January 1972;














(c)


for Norway: the duties shown in Table II annexed to this Protocol.




2.   The difference between the basic duties so defined and the duties applicable on 1 July 1977, which are shown in the Tables annexed to this Protocol, shall be progressively abolished by five reductions of 20 % each to be made on the following dates:
On the date of entry into force of the Agreement,






 


1 January 1974,










 


1 January 1975,










 


1 January 1976,










 


1 July 1977.




However, if the duty applicable on 1 July 1977 is greater than the basic duty, the difference between these duties shall be reduced by 40 % on 1 January 1974 and again reduced by 20 % on each of the following dates:






 


1 January 1975,










 


1 January 1976,










 


1 July 1977.




Notwithstanding Article 5 (3) of the Agreement and subject to the application by the Community of Article 39 (5) of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’, as regards the specific duties or the specific part of the mixed duties of the customs tariff of the United Kingdom, paragraphs 1 and 2 shall be applied with rounding to the fourth decimal place for the products listed below:






CCT heading No


Description




22.06


Vermouths, and other wines of fresh grapes flavoured with aromatic extracts




ex 22.09


Spirits (other than those of heading No 22.08); liqueurs and other spirituous beverages; compound alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages:






—


Spirits other than rum, arrack, tafia, gin, whisky, vodka with an ethyl alcohol content of 45·2o or less, and plum, pear or cherry brandy, containing eggs or egg yolk and/or sugar (sucrose or invert sugar).








Article 3
1.   This Protocol shall also apply to the alcoholic beverages of subheading No 22.09 C of the Common Customs Tariff not specified in Tables I and II annexed to this Protocol. The rules governing tariff reductions applicable to these products shall be decided by the Joint Committee.
When defining these rules or at a later date, the Joint Committee shall decide whether to include in this Protocol other products of Chapters 1 to 24 of the Brussels Nomenclature which are not subject to agricultural regulations in the territories of the Contracting Parties.
2.   On this occasion the Joint Committee shall supplement, if necessary, Annexes II and III to Protocol No 3.
TABLE I
EUROPEAN ECONOMIC COMMUNITY








CCT heading No


Description


Basic duties


Duty applicable on 1 July 1977




15.10


Fatty acids; acid oils from refining; fatty alcohols:


 


 










ex C.


Other fatty acids; acid oils from refining:






 


 










—


Products obtained from pinewood, with a fatty acid content of 90 % or more by weight






4·5 %


0




17.04


Sugar confectionery, not containing cocoa:


 


 










A.


Liquorice extract containing more than 10 % by weight of sucrose but not containing other added substances






21 %


12 %










B.


Chewing gum






8 % + vc with max. of 23 %


vc










C.


White chocolate






13 % + vc with max. of 27 % + ads


vc










D.


Other






13 % + vc with max. of 27 % + ads


vc




18.06


Chocolate and other food preparations containing cocoa:


 


 










A.


Cocoa powder, not otherwise sweetened than by the addition of sucrose






10 % + vc


vc










B.


Ice-cream (not including ice-cream powder)






12 % + vc with max. of 27 % + ads


vc










C.


Chocolate and chocolate goods, whether or not filled; sugar confectionery and substitutes therefor made from sugar substitution products, containing cocoa






12 % + vc with max. of 27 % + ads


vc










D.


Other:






 


 










I.


Containing no milkfats or containing less than 1·5 % by weight of such fats:






 


 










(a)


In immediate packings of a net capacity of 500 g or less






12 % + vc with max. of 27 % + ads


vc










(b)


Other:






 


 










—


In immediate packings of a net capacity of more than 500 g but of not more than 1 kg






19 % + vc


vc










—


Other






19 % + vc


6 % + vc










II.


Containing by weight of milkfats:






 


 










(a)


More than 1·5 % but less than 6·5 %






 


 










1.


In immediate packings of a net capacity of 500 g or less






12 % + vc with max. of 27 % + ads


vc










2.


Other:






 


 










—


In immediate packings of a net capacity of more than 500 g but of not more than 1 kg






19 % + vc


vc










—


Other






19 % + vc


6%+vc










(b)


More than 6·5 % but less than 26 %:






 


 










1.


In immediate packings of a net capacity of 500 g or less






12 % + vc


vc










2.


Other:






 


 










—


In immediate packings of a net capacity of more than 500 g but of not more than 1 kg






19 % + vc


vc










—


Other






19 % + vc


6 % + vc










(c)


26 % or more:






 


 










1.


In immediate packings of a net capacity of 500 g or less






12 % + vc


vc










2.


Other:






 


 










—


In immediate packings of a net capacity of more than 500 g but of not more than 1 kg






19 % + vc


vc










—


Other






19 % + vc


6 % + vc




19.01


Malt extract


8 % + vc


vc




19.02


Preparations of flour, meal, starch or malt extract, of a kind used as infant food or for dietetic or culinary purposes, containing less than 50 % by weight of cocoa


11 % + vc


vc




19.03


Macaroni, spaghetti and similar products


12 % + vc


vc




19.04


Tapioca and sago; tapioca and sago substitutes obtained from potato or other starches


10 % + vc


vc




19.05


Prepared foods obtained by the swelling or roasting of cereals or cereal products (puffed rice, cornflakes and similar products)


8 % + vc


vc




19.06


Communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products


7 % + vc


vc




19.07


Bread, ships' biscuits and other ordinary bakers' wares, not containing added sugar, honey, eggs, fats, cheese or fruit:


 


 










A.


Crispbread






9 % + vc with max. of 24 % + adf


vc










B.


Matzos






6 % + vc with max. of 20 % + adf


vc










C.


Gluten bread for diabetics






14 % + vc


vc










D.


Other






14 % + vc


vc




19.08


Pastry, biscuits, cakes and other fine bakers' wares, whether or not containing cocoa in any proportion:


 


 










A.


Gingerbread and the like






13 % + vc


vc










B.


Other






13 % + vc with max. of 30 % + adf or 35 % + ads


vc




21.01


Roasted chicory and other roasted coffee substitutes; extracts, essences and concentrates thereof:


 


 










A.


Roasted chicory and other roasted coffee substitutes:






 


 










II.


Other






8 % + vc


vc










B.


Extracts, essences and concentrates of the products described under subheading A:






 


 










II.


Other






14 % + vc


vc




21.04


Sauces; mixed condiments and mixed seasonings:


 


 










B.


Other






 


 










—


Containing tomatoes






18 %


10 %










—


Not specified






18 %


6 %




21.05


Soups and broths, in liquid, solid or powder form; homogenized composite food preparations:


 


 










A.


Soups and broths, in liquid, solid or powder form:






 


 










—


Containing tomatoes






18 %


10 %










—


Not specified






18 %


6 %




21.06


Natural yeasts (active or inactive); prepared baking powders:


 


 










A.


Active natural yeasts:






 


 










II.


Bakers' yeasts






15 % + vc


vc










B.


Inactive natural yeasts:






 


 










I.


In tablet, cube or similar form, or in immediate packings of a net capacity of 1 kg or less






13 %


4 %










II.


Other






8 %


4 %




21.07


Food preparations not elsewhere specified or included:


 


 










A.


Cereals in grain or ear form, pre-cooked or otherwise prepared






13 % + vc


vc










B.


Ravioli, macaroni, spaghetti and similar products, not stuffed, cooked; the foregoing preparations, stuffed






13 % + vc


vc










C.


Ice-cream (not including ice-cream powder) and other ices






13 % + vc


vc










D.


Prepared yoghourt; prepared milk, in powder form, for use as infants' food or for dietetic or culinary purposes






13 % + vc


vc










E.


Cheese fondues






13 % + vc with max. of 35 UA per 100 kg net weight


vc with max. of 25 UA per 100 kg net weight










F.


Other:






 


 










I.


Containing no milkfats or containing less than 1·5 % by weight of such fats:






 


 










(a)


Containing no sucrose or containing less than 5 % by weight of sucrose (including invert sugar expressed as sucrose):






 


 










ex 1.


Containing no starch or less than 5 % by weight of starch:






 


 










—


Hydrolysates of proteins; autolysates of yeast






20 %


6 %










2.


Containing by weight of starch 5 % or more






13 % + vc


vc










(b)


Containing 5 % or more but less than 15 % by Weight of sucrose (including invert sugar expressed as sucrose)






13 % + vc


vc










(c)


Containing 15 % or more but less than 30 % by weight of sucrose (including invert sugar expressed as sucrose)






13 % + vc


vc










(d)


Containing 30 % or more but less than 50 % by weight of sucrose (including invert sugar expressed as sucrose)






13 % + vc


vc










(e)


Containing 50 % or more but less than 85 % by weight of sucrose (including invert sugar expressed as sucrose)






13 % + vc


vc










(f)


Containing 85 % or more by weight of sucrose (including invert sugar expressed as sucrose)






13 % + vc


vc










II.


Containing 1·5 % or more but less than 6 % by weight of milkfats






13 % + vc


vc










III.


Containing 6 % or more but less than 12 % by weight of milkfats






13 % + vc


vc










IV.


Containing 12 % or more but less than 18 % by weight of milkfats






13 % + vc


vc










V.


Containing 18 % or more but less than 26 % by weight of milkfats






13 % + vc


vc










VI.


Containing 26 % or more but less than 45 % by weight of milkfats:






 


 










—


In immediate packings of a net capacity of 1 kg or less






13 % + vc


vc










—


Other






13 % + vc


6 % + vc










VII.


Containing 45 % or more but less than 65 % by weight of milkfats:






 


 










—


In immediate packings of a net capacity of 1 kg or less






13 % + vc


vc










—


Other






13 % + vc


6 % + vc










VIII.


Containing 65 % or more but less than 85 % by weight of milkfats:






 


 










—


In immediate packings of a net capacity of 1 kg or less






13 % + vc


vc










—


Other






13 % + vc


6 % + vc










IX.


Containing 85 % or more by weight of milkfats:






 


 










—


In immediate packings of a net capacity of 1 kg or less






13 % + vc


vc










—


Other






13 % + vc


6 % + vc




22.02


Lemonade, flavoured spa waters and flavoured aerated waters, and other non-alcoholic beverages, not including fruit and vegetable juices falling within heading No 20.07:


 


 










ex A.


Not containing milk or milkfats:






 


 










—


Containing sugar (sucrose or invert sugar)






15 %


0










B.


Other






8 % + vc


vc




22.03


Beer made from malt


24 %


10%




22.06


Vermouths, and other wines of fresh grapes flavoured with aromatic extracts:


 


 










A.


Of an actual alcoholic strength of 18o or less, in containers containing:






 


 










I.


2 litres or less






17 UA/hl


0










II.


More than 2 litres






14 UA/hl


0










B.


Of an actual alcoholic strength exceeding 18o but not exceeding 22o, in containers containing:






 


 










I.


2 litres or less






19 UA/hl


0










II.


More than 2 litres






16 UA/hl


0










C.


Of an actual alcoholic strength exceeding 22o, in containers containing:






 


 










I.


2 litres or less






1·60 UA/hl per degree of alcohol + 10 UA/hl


0










II.


More than 2 litres






1·60 UA/hl per degree of alcohol


0




22.09


Spirits (other than those of heading No 22.08); liqueurs and other spirituous beverages; compound alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages:


 


 










C.


Spirituous beverages:






 


 










ex V.


Other:






 


 










—


Containing eggs or egg yolks and/or sugar (sucrose or invert sugar), in containers containing:






 


 










(a)


2 litres or less






1·60 UA/hl per degree of alcohol + 10 UA/hl


1 UA/hl per degree of alcohol + 6 UA/hl










(b)


More than 2 litres






1·60 UA/hl per degree of alcohol


1 UA/hl per degree of alcohol




29.04


Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










C.


Polyhydric alcohols:






 


 










II.


Mannitol






12 % + vc


8 % + vc










III.


Sorbitol






 


 










(a)


In aqueous solutions:






 


 










1.


Containing 2 % or less by weight of mannitol, calculated on the sorbitol content






12 % + vc


6 % + vc










2.


Other






9 % + vc


6 % + vc










(b)


Other:






 


 










1.


Containing 2 % or less by weight of mannitol, calculated on the sorbitol content






12 % + vc


6 % + vc










2.


Other






9 % + vc


6 % + vc




29.10


Acetals and hemiacetals and single or complex oxygen-function acetals and hemiacetals, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










ex B.


Other:






 


 










—


Methyl glucosides






14·4 %


8%




29.14


Monocarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










ex A.


Saturated acyclic monocarboxylic acids:






 


 










—


Esters of mannitol and esters of sorbitol






from 8·8 % to 18·4 %


8%










ex B.


Unsaturated acyclic monocarboxylic acids:






 


 










—


Esters of mannitol and esters of sorbitol






from 12 % to 13·6 %


8%




29.15


Polycarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










A.


Acyclic polycarboxylic acids:






 


 










ex V.


Other:






 


 










—


Itaconic acid and its salts and esters






10·4 %


0




29.16


Carboxylic acids with alcohol, phenol, aldehyde or ketone function and other single or complex oxygen-function carboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










A.


Carboxylic acids with alcohol function:






 


 










I.


Lactic acid and its salts and esters






13·6 %


0










IV.


Citric acid and its salts and esters:






 


 










(a)


Citric acid






15·2 %


0










(b)


Crude calcium citrate






5·6 %


0










(c)


Other






16 %


0










ex VIII.


Other:






 


 










—


Glyceric, glycollic, saccharonic, isosaccharonic and heptasaccharic acids and their salts and esters






12 %


8 %




29.35


Heterocyclic compounds; nucleic acids:


 


 










ex Q.


Other:






 


 










—


Anhydrous mannitol and sorbitol compounds, excluding maltol and isomaltol






10·4 %


8 %




29.43


Sugars, chemically pure, other than sucrose, glucose and lactose; sugar ethers and sugar esters, and their salts, other than products of headings Nos 29.39, 29.41 and 29.42:


 


 










B.


Other






20 %


8 %




29.44


Antibiotics:


 


 










A.


Penicillins






16·8 %


0




35.01


Casein, caseinates and other casein derivatives; casein glues:


 


 










A.


Casein:






 


 










I.


For the manufacture of regenerated textile fibres (1)







2 %


0










II.


For industrial uses other than the manufacture of foodstuffs or fodder (1):






 


 










—


With a water content of 50 % or more by weight






5 %


0










—


Other






5 %


3 %










III.


Other






14 %


12 %










B.


Casein glues






13 %


11 %










C.


Other






10 %


8 %




35.05


Dextrins and dextrin glues; soluble or roasted starches; starch glues:


 


 










A.


Dextrins; soluble or roasted starches






14 % + vc


vc










B.


Glues made from dextrin or from starch






13 % + vc with max. of 18 %


vc




35.06


Prepared glues not elsewhere specified or included; products suitable for use as glues, put up for sale by retail as glues in packages not exceeding a net weight of 1 kg:


 


 










A.


Prepared glues not elsewhere specified or included:






 


 










ex II.


Other glues:






 


 










—


With a basis of sodium silicate emulsion






12·8 %


0










ex B.


Products suitable for use as glues, put up for sale by retail as glues in packages not exceeding a net weight of 1 kg:






 


 










—


With a basis of sodium silicate emulsion






15·2 %


0




38.12


Prepared glazings, prepared dressings and prepared mordants, of a kind used in the textile, paper, leather or like industries:


 


 










A.


Prepared glazings and prepared dressings:






 


 










I.


With a basis of amylaceous substances






13 % + vc with max. of 20 %


vc




38.19


Chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:


 


 










Q.


Foundry core binders based on synthetic resins






12·8 %


8 %










ex T.


Other:






 


 










—


Products of sorbitol cracking






14·4 %


8 %




39.02


Polymerization and copolymerization products (for example, polyethylene, polytetrahaloethylenes, polyisobutylene, polystyrene, polyvinyl chloride, polyvinyl acetate, polyvinyl chloroacetate and other polyvinyl derivatives, polyacrylic and polymethacrylic derivatives, coumarone-indene resins):


 


 










ex C.


Other:






 


 










—


Adhesives with a basis of resin emulsions






from 12 % to 18·4 %


0




39.06


Other high polymers, artificial resins and artificial plastic materials, including alginic acid, its salts and esters; linoxyn:


 


 










ex B.


Other:






 


 










—


Dextran






16 %


6 %










—


Not specified, excluding linoxyn






16 %


8 %










TABLE II

NORWAY









Norwegian Customs Tariff heading No


Description


Basic duties (N.Kr./kg)


Duty applicable on 1 July 1977




15.10


Fatty acids; acid oils from refining; fatty alcohols:


 


 










ex C.


Other:






 


 










—


Fatty acids obtained from pinewood, with a fatty acid content of 90 % or more by weight






0·16


0




17.04


Sugar confectionery, not containing cocoa:


 


 










A.


Liquorice






2·00


0 (2)











B.


Other






1·00


0 (2)





18.06


Chocolate and other food preparations containing cocoa:


 


 










A.


Chocolate; cocoa powder, sweetened; ice-cream; ice-cream powders and table cream powders:






 


 










—


Cocoa powder, sweetened






1·00


0










—


Chocolate; ice-cream powders and table cream powders






1·00


0 (2)











—


Ice-cream






15% with a minimum of N.Kr. 0·90 per kg


0·90










B.


Other






0·50


0 (2)





19.01


Malt extract


0·40


0




19.02


Preparations of flour, meal, starch or malt extract of a kind used as infant food or for dietetic or culinary purposes, containing less than 50 % by weight, of cocoa:


 


 










—


Cake mixtures in containers of a net capacity of less than 2 kg






0·80


0 (2)











—


Other






0·80


0·50 (2)





19.03


Macaroni, spaghetti and similar products


0·40


0·20 (2)





19.04


Tapioca and sago; tapioca and sago substitutes obtained from potato or other starches


0·60


0·20 (2)





19.05


Prepared foods obtained by the swelling or roasting of cereal products (puffed rice, cornflakes and similar products)


0·40


0




19.06


Communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper and similar products


1·60


0




19.07


Bread, ships' biscuits and other ordinary bakers' wares, not containing added sugar, honey, eggs, fats, cheese and fruit:


 


 










—


‘Knekkebrød’






20 %


10 % (2)











—


‘flatbrød’






 


 










—


Containing wheat






0·80


0










—


Other






0·20


0










—


Ships' biscuits, fine bread crumbs and rusks:






 


 










—


Containing wheat






0·80


0










—


Other






0·20


0










—


Other:






 


 










—


Containing wheat






0-80


0·50 (2)











—


Other






0·20


0




19.08


Pastry, biscuits, cakes and other fine bakers' wares, whether or not containing cocoa in any proportion


2·00


0 (2)





21.01


Roasted chicory and other roasted coffee substitutes; extracts, essences and concentrates thereof


Free


Free




21.04


Sauces; mixed condiments and mixed seasonings


18 % + vc with a maximum of N.Kr. 1·50 per kg


vc (2)





21.05


Soups and broths, in liquid, solid or powder form; homogenized composite food preparations:


 


 










B.


Soups and broths, in liquid, solid or powder form:






 


 










1.


In airtight containers:






 


 










(a)


Meat broth






8 % + vc with a maximum of N.Kr. 0·70 per kg


vc (2)











(b)


Vegetable soups and broths, containing neither meat or extract






8 % + vc with a maximum of N.Kr. 0·35 per kg


vc (2)











(c)


Other






8 % + vc


vc (2)











2.


In other containers:






 


 










(a)


Containing meat or meat extract






8 % + vc


vc (2)











(b)


Other






8 % + vc


vc (2)





21.06


Natural yeasts (active or inactive); prepared baking powders:


 


 










ex A.


Natural yeasts:






 


 










1.


Wine yeast






1·20


0










2.


Yeast for feeding animals






Free


Free










3.


Other, except pressed yeast






30 %


0




21.07


Food preparations not elsewhere specified or included:


 


 










A.


Semi-manufactures intended for the manufacture of products falling within heading No 19.05






0·20


0










B.


Sweets and chewing gum, not containing sugar






1·00


0 (2)











C. 1.


Non-alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages:






 


 










(a)


Concentrated extracts of juice from apples and blackcurrants






15 %


10 % (2)











(b)


Other






15 %


0










2.


Canned corn and other prepared maize






15 %


0










D.


Other






 


 










1.


Ice-cream, ice-cream powders and table cream powders:






 


 










(a)


Ice-cream containing fatty substances






30 % with a minimum of N.Kr. 1·70 per kg


N.Kr 1·70 per kg










(b)


Other






30 %


0 (2)











2.


Sweetfat; fatty emulsions and similar products of the kinds used by bakers and pastry cooks:






 


 










(a)


With a content of fatty substances of less than 10 % by weight






30 %


0 (2)











(b)


With a content of fatty substances of 10 % by weight or more






30 %


25 % (2)











3.


Yoghurt, flavoured or with added fruit






30 % with a minimum of N.Kr. 1·70 per kg


N.Kr. 1·70 per kg










4.


Minute rice and the like






30 %


0










5.


Coffee pastes; ravioli, macaroni, spaghetti and other similar pastes, cooked






30 %


0










6.


Other






30 %


0 (2)





22.02


Lemonade, flavoured spa waters and flavoured aerated waters, and other non-alcoholic beverages not including fruit and vegetable juices falling within heading No 20.07


1·00


0 (2)





22.03


Beer made from malt:


 


 










A.


In bottles or jars






N.Kr. 2·00 per litre


0










B.


In other containers






1·80


0




22.06


Vermouths and other wines of fresh grapes flavoured with aromatic extracts


Free


Free




ex 22.09


Ethyl alcohol, undenatured, of a strength of less than 80; liqueurs and other spirituous beverages; compound alcoholic preparations (known as ‘concentrated extracts’) for the manufacture of beverages:


 


 










—


Spirituous beverages containing eggs or egg yolks and/or sugar (sucrose or invert sugar)






Free


Free




29.04


Acyclic alcohols and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










ex C.


Other:






 


 










—


Mannitol and sorbitol






15 %


0




ex 29.10


Acetals and hemiacetals and single or complex oxygen-function acetals and hemiacetals, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










—


Methylglucosides






15 %


0




ex 29.14


Monocarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










—


Esters of mannitol and sorbitol






24 %


0




29.15


Polycarboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










ex A.


Itaconic acids and their salts






Free


Free










ex B.


Esters of itaconic acids






24 %


0




ex 29.16


Carboxylic acids with alcohol, phenol, aldehyde or ketone function and other single or complex oxygen-function carboxylic acids and their anhydrides, halides, peroxides and peracids, and their halogenated, sulphonated, nitrated or nitrosated derivatives:


 


 










(i)


Lactic acid, citric acid, glyseric acid, glycolic acid, saccharic acid, isosaccharic acid and heptasaccharic acid and their salts






Free


Free










(ii)


Esters of lactic acid, citric acid, glyseric acid, glycolic acid, saccharic acid, isosaccharic acid and heptasaccharic acid






15 %


0




ex 29.35


Heterocyclic compounds, nucleic acids:


 


 










—


Anhydrides of mannitol and sorbitol, except of maltol and isomaltol






15 %


0




ex 29.43


Sugars, chemically pure, other than sucrose, glucose and lactose; sugar ethers and sugar esters, and their salts, other than products of headings Nos 29.39, 29.41 and 29.42:


 


 










—


Other than rhamnose, raffinose and mannose






0·10


0




ex 29.44


Antibiotics:


 


 










—


Penicillins and their salts and other derivatives






Free


Free




35.01


Casein, caseinates and other casein derivatives; casein glues:


 


 










A.


Casein






1·50


0 (2)











B.


Casein glues






25 %


0 (2)











C.


Other






15 %


0 (2)





35.05


Dextrins and dextrin glues; soluble or roasted starches; starch glues:


 


 










A.


Soluble and roasted starches:






 


 










1.


Of potatoes:






 


 










(a)


For food processing industry and household use






0·51 + vc with maximum of N. Kr. 0·51 per kg


0·17 + vc (3)











(b)


Other






0·51


0










2.


Other






0·51


0










B.


Other






0·51


0




ex 35.06


Prepared glues not elsewhere specified or included; products suitable for use as glues put up for sale by retail as glues in packages not exceeding a net weight of 1 kg:


 


 










—


Based on emulsions of natriumsilicate






12·5 %


0




ex 38.12


Prepared glazings, prepared dressings and prepared mordants, of a kind used in the textile, paper, leather or like industries:


 


 










—


Starch based






0·51


0 (2)





ex 38.19


Chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included:


 


 










—


Foundry core binders based on artificial resins






0·10


0










—


Products of sorbitol cracking






15 %


0




ex 39.02


Polymerization and copolymerization products (for example, polyethylene, polytetrahaloethylenes, polyisobutylene, polystyrene, polyvinyl chloride, polyvinyl acetate, polyvinyl chloroacetate and other polyvinyl derivatives, polyacrylic and polymethacrylic derivatives, coumarone-indene resins):


 


 










—


Glues based on resin emulsions






10—20 %


0




ex 39.06


Other high polymers, artificial resins and artificial plastic materials, including alginic acid, its salts and esters; linoxyn:


 


 










—


Other high polymers, artificial resins and artificial plastic materials, their salts and esters, except alginic acid and its salts and esters






15 %


0









(1)  Entry under this subheading is subject to conditions to be determined by the competent authorities.

Note: The abbreviations vc, ads, adf appearing in this list mean ‘variable component’, ‘additional duty on sugar’‘additional duty on flour’.

(2)  Norway reserves the right to choose the system to be applied in order to take account of the differences in the prices of basic agricultural products.

(3)  As an exception to the provisions of Article 2 (1) and (2) of Protocol No 2, the Joint Committee shall decide how the reductions for this heading are to be implemented and the date of the first reduction.

Note: The Abbreviation vc appearing in this list means ‘variable component’.



PROTOCOL No 3
concerning the definition of the concept of ‘originating products’ and methods of administrative cooperation
TITLE I

Definition of the concept of ‘originating products’

Article 1
For the purpose of implementing the Agreement, and without prejudice to the provisions of Articles 2 and 3 of this Protocol, the following products shall be considered as:






1.


products originating in the Community:






(a)


products wholly obtained in the Community;










(b)


products obtained in the Community in the manufacture of which products other than those referred to in (a) are used, provided that the said products have undergone sufficient working or processing within the meaning of Article 5. This condition shall not apply, however, to products which, within the meaning of this Protocol, originate in Norway;














2.


products originating in Norway;






(a)


products wholly obtained in Norway;










(b)


products obtained in Norway in the manufacture of which products other than those referred to in (a) are used, provided that the said products have undergone sufficient working or processing within the meaning of Article 5. This condition shall not apply, however, to products which, within the meaning of this Protocol, originate in the Community.








The products in List C shall be temporarily excluded from the scope of this Protocol.
Article 2
1.   Inasmuch as trade between the Community and Austria, Finland, Iceland, Portugal, Sweden and Switzerland, and between Norway and the latter six countries, and also between each of those six countries themselves is governed by agreement containing rules identical to those in this Protocol, the following products shall also be considered as:






A.


products originating in the Community: those products referred to in Article 1 (1) which, after being exported from the Community, have undergone no working or processing in any of those six countries or have not undergone sufficient working or processing there to confer on them the status of products originating in any of those countries by virtue of provisions corresponding to those of Article 1 (1) (b) or (2) (b) of this Protocol contained in the agreements referred to above, provided that:






(a)


only products originating in any of those six countries or in the Community or in Norway have been used in the course of the working or processing;










(b)


where a percentage rule limits, in the Lists A or B referred to in Article 5, the proportion in value of non-originating products that can be incorporated under certain circumstances, the added value has been acquired in each of the countries in accordance with the percentage rules and with the other rules contained in the said lists without any possibility of cumulation from one country to another;














B.


products originating in Norway: those products referred to in Article 1 (2) which, after being exported from Norway have undergone no working or processing in any one of these six countries or have undergone working or processing insufficient to confer on them the status of products originating in any of those countries by virtue of provisions corresponding to those of Article 1 (1) (b) or (2) (b) of this Protocol contained in the agreements referred to above, provided that:






(a)


only products originating in any one of those six countries or in the Community or in Norway have been used in the course of the working or processing;










(b)


where a percentage rules limits, in the Lists A or B referred to in Article 5, the proportion in value of non-originating products that can be incorporated under certain circumstances, the added value has been acquired in each of the countries in accordance with the percentage rules and with the other rules contained in the said lists without any possibility of cumulation from one country to another.








2.   For the purpose of implementing paragraph 1 (A) (a) and (B) (a), the fact that products other than those referred to therein are used in a proportion not exceeding in total value 5 % of the value of the products obtained and imported into Norway or the Community does not affect the determination of origin of the latter products, provided that they would not have caused the products exported from the Community or Norway in the first place to lose their status of products originating in the Community or in Norway had they been incorporated there.
3.   In the cases referred to in paragraph 1 (A) (b) and (B) (b) and paragraph 2, no non-originating product may be incorporated if it only undergoes the working or processing provided for in Article 5 (3).
Article 3
Notwithstanding the provisions of Article 2 and provided that all the conditions laid down in that Article are nevertheless fulfilled, the products obtained shall not continue to be considered as products originating in the Community or in Norway respectively unless the value of the products worked or processed originating in the Community or in Norway represents the highest percentage of the value of the products obtained. If this is not so, the latter products are considered as originating in the country where the added value acquired represents the highest percentage of their value.
Article 4
The following shall be considered as wholly obtained either in the Community or in Norway within the meaning of Article 1 (1) (a) and (2) (a):






(a)


mineral products extracted from their soil or from their seabed;










(b)


vegetable products harvested there;










(c)


live animals born and raised there;










(d)


products from live animals raised there;










(e)


products obtained by hunting or fishing conducted there;










(f)


products of sea fishing and other products taken from the sea by their vessels;










(g)


products made aboard their factory ships exclusively from products referred to in subparagraph (f);










(h)


used articles collected there fit only for the recovery of raw materials;










(i)


waste and scrap resulting from manufacturing operations conducted there;










(j)


goods produced there exclusively from products specified in subparagraphs (a) to (i).




Article 5
1.   For the purpose of implementing Article 1 (1) (b) and (2) (b) the following shall be considered as sufficient working or processing:






(a)


working or processing as a result of which the goods obtained receive a classification under a tariff heading other than that covering each of the products worked or processed, except, however, working or processing specified in List A, where the special provisions of that list apply;










(b)


working or processing specified in List B.




‘Sections’, ‘Chapters’ and ‘tariff headings’ shall mean the Sections, Chapters and tariff headings in the Brussels Nomenclature for the Classification of Goods in Customs Tariffs.
2.   When, for a given product obtained, a percentage rule limits in List A and in List B the value of the materials and parts which can be used, the total value of these materials and parts, whether or not they have changed tariff heading in the course of the working, processing or assembly within the limits and under the conditions laid down in each of those two lists, may not exceed, in relation to the value of the product obtained, the value corresponding either to the common rate, if the rates are identical in both lists, or to the higher of the two if they are different.
3.   For the purpose of implementing Article 1 (1) (b) and (2) (b), the following shall still be considered as insufficient working or processing to confer the status of orginating product, whether or not there is a change of tariff heading:






(a)


operations to ensure the preservation of merchandise in good condition during transport and storage (ventilation, spreading out, drying, chilling, placing in salt, sulphur dioxide or other aqueous solutions, removal of damaged parts, and like operations);










(b)


simple operations consisting of removal of dust, sifting or screening, sorting, classifying, matching (including the making up of sets of articles), washing, painting, cutting up;










(c)








(i)


changes of packing and breaking up and assembly of consignments;










(ii)


simple placing in bottles, flasks, bags, cases, boxes, fixing on cards or boards, etc, and all other simple packing operations;














(d)


affixing marks, labels or other like distinguishing signs on products or their packaging;










(e)


simple mixing of products, whether or not of different kinds, where one or more components of the mixtures d6 not meet the conditions laid down in this Protocol to enable them to be considered as originating either in the Community or in Norway;










(f)


simple assembly of parts of articles to constitute a complete article;










(g)


a combination of two or more operations specified in subparagraphs (a) to (f);










(h)


slaughter of animals.




Article 6
1.   Where the Lists A and B referred to in Article 5 provide that goods obtained in the Community or in Norway shall be considered as originating therein only if the value of the products worked or processed does not exceed a given percentage of the value of the goods obtained, the values to be taken into consideration for determining such percentage shall be:






—


on the one hand,
as regards products whose importation can be proved: their customs value at the time of importation;
as regards products of undetermined origin: the earliest ascertainable price paid for such products in the territory of the Contracting Party where manufacture takes place;










—


and on the other hand,
the ex-works price of the goods obtained, less internal taxes refunded or refundable on exportation.




This Article also applies for the implementation of Articles 2 and 3.
2.   Where Articles 2 and 3 apply, ‘added value acquired’ shall be understood as meaning the difference between the ex-works price of the goods obtained, less internal taxes refunded or refundable on exportation from the country concerned or from the Community, and the customs value of all the products imported and worked or processed in that country or in the Community.
Article 7
Goods originating in Norway or in the Community and constituting one single shipment which is not split up may be transported through territory other than that of the Community, Norway, Austria, Finland, Iceland, Portugal, Sweden or Switzerland, with, should, the occasion arise, transhipment or temporary warehousing in such territory, provided that the crossing of the latter territory is justified for geographical reasons, that the goods have remained under the surveillance of the customs authorities in the country of transit or of warehousing, that they have not entered into the commerce of such countries or been delivered for home use there and have not undergone operations other than unloading, reloading or any operation designed to preserve them in good condition.
TITLE II

Arrangements for administrative cooperation

Article 8
1.   Originating products within the meaning of Article 1 of this Protocol shall, on import into the Community or into Norway, benefit from the provisions of the Agreement upon submission of an A.N.1 movement certificate, a specimen of which is given in Annex V to this Protocol, issued by the customs authorities of Norway or of the Member States of the Community.
2.   Where Article 2 and, where appropriate, Article 3 are applied, A.W.1 movement certificates, a specimen of which is given in Annex VI to this Protocol, shall be used. They shall be issued by the customs authorities of each of the countries concerned where the goods have either been held before their re-exportation in the same state or undergone the working or processing referred to in Article 2, upon presentation of the movement certificates issued previously.
3.   In order that the customs authorities may satisfy themselves as to the conditions in which the goods have been kept in the territory of each of the countries concerned in cases where they have not been placed in a bonded warehouse and are to be re-exported in the same state, the movement certificates issued earlier and presented on importation of the goods shall, at the request of the holder of the goods, be duly endorsed at the time of importation and thereafter every six months by the said authorities.
4.   The customs authorities of Norway and of the Member States of the Community shall be authorized to issue the movement certificates specified in the agreements referred to in Article 2 under the conditions laid down in those agreements provided that the goods covered by the certificates are in the territory of Norway or of the Community. A specimen of the certificate to be used is given in Annex VI to this Protocol.
5.   Where the term ‘movement certificate’ or ‘movement certificates’ is used in this Protocol and it is not specified whether the certificate or certificates concerned are of the type described in paragraph 1 or of the type described in paragraph 2, the relevant provisions shall apply equally to both types of certificate.
Article 9
A movement certificate shall be issued only on application having been made in writing by the exporter, on the form prescribed for this purpose.
Article 10
1.   A movement certificate shall be issued by the customs authorities of the exporting State when the goods to which it relates are exported. It shall be made available to the exporter as soon as actual exportation has been effected or ensured.
In exceptional circumstances a movement certificate may also be issued after exportation of the goods to which it relates if it was not issued at the time of exportation because of errors or involuntary omissions or special circumstances. In this case, the certificate shall bear a special reference to the conditions in which it was issued.
A movement certificate may be issued only where it can serve as the documentary evidence required for the purpose of implementing the preferential treatment provided for in the Agreement.
2.   A movement certificate issued under the conditions laid down in Article 8 (2) or (4) must bear references to the movement certificate or certificates issued earlier upon presentation of which it is issued.
3.   Applications for movement certificates and for certificates referred to in paragraph 2, upon presentation of which new certificates are issued, must be preserved for at least two years by the customs authorities of the exporting country.
Article 11
1.   A movement certificate must be submitted, within four months of the date of issue by the customs authorities of the exporting State, to the customs authorities of the importing State where the goods are entered.
2.   A movement certificate which is submitted to the customs authorities of the importing State after the final date for presentation specified in paragraph 1 may be accepted for the purpose of applying preferential treatment, where the failure to submit the certificate by the final date set is due to reasons of force majeure or exceptional circumstances.
In other cases of belated presentation, the customs authorities of the importing State may accept the certificates where the goods have been submitted to them before the said final date.
3.   Movement certificates, whether or not endorsed in the conditions laid down in Article 8 (3), shall be preserved by the customs authorities of the importing State in accordance with the rules in force in that State.
Article 12
Movement certificates shall be made out on the appropriate form, specimens of which are given in Annexes V and VI to this Protocol, in one of the languages in which the Agreement is drawn up, and in accordance with the provisions of the domestic law of the exporting State. If they are handwritten, they shall be completed in ink in print-script.
Each certificate shall measure 210 × 297 mm. The paper used must be white sized writing paper not containing mechanical pulp and weighing not less than 25 grammes per square metre. It shall have a printed green guilloche pattern background making any falsification by mechanical or chemical means apparent to the eye.
The Member States of the Community and Norway may reserve the right to print the certificates themselves or may have them printed by approved printers. In the latter case, each certificate must include a reference to such approval. Each certificate must bear the name and address of the printer or a mark by which the printer can be identified. It shall also bear a serial number by which it can be identified.
Article 13
Movement certificates shall be submitted to customs authorities in the importing State, in accordance with the procedures laid down by that State. The said authorities may require a translation of a certificate. They may also require the import declaration to be accompanied by a statement from the importer to the effect that the goods meet the conditions required for the implementation of the Agreement.
Article 14
1.   The Community and Norway shall admit goods sent as small packages to private persons or forming part of travellers' personal luggage as originating products benefiting from the Agreement without requiring the production of a movement certificate, provided that such goods are not imported by way of trade and have been declared as meeting the conditions required for the application of these provisions, and where there is no doubt as to the veracity of such declaration.
2.   Importations which are occasional and consist solely of goods for the personal use of the recipients or travellers or their families shall not be considered as importations by way of trade if it is evident from the nature and quantity of the goods that no commercial purpose is in view. Furthermore, the total value of these goods must not exceed 60 units of account in the case of small packages or 200 units of account in the case of the contents of travellers' personal luggage.
3.   The unit of account (UA) has a value of 0·88867088 grammes of fine gold. Should the unit of account be changed, the Contracting Parties shall make contact with each other at Joint Committee level to redefine the value in terms of gold.
Article 15
1.   Goods sent from the Community or from Norway for exhibition in a country other than those referred to in Article 2 and sold after the exhibition for importation into Norway or into the Community shall benefit on importation from the provisions of the Agreement on condition that the goods meet the requirements of this Protocol entitling them to be recognized as originating in the Community or in Norway and provided that it is shown to the satisfaction of the customs authorities that:






(a)


an exporter has consigned these goods from the Community or from Norway to the country in which the exhibition is held and has exhibited them there;










(b)


the goods have been sold or otherwise disposed of by that exporter to someone in Norway or in the Community;










(c)


the goods have been consigned during the exhibition or immediately thereafter to Norway or to the Community in the state in which they were sent for exhibition;










(d)


the goods have not, since they were consigned for exhibition, been used for any purpose other than demonstration at the exhibition.




2.   A movement certificate must be produced to the customs authorities in the normal manner. The name and address of the exhibition must be indicated thereon. Where necessary, additional documentary evidence of the nature of the goods and the conditions under which they have been exhibited may be required.
3.   Paragraph 1 shall apply to any trade, industrial, agricultural or crafts exhibition, fair or similar public show or display which is not organized for private purposes in shops or business premises with a view to the sale of foreign goods, and during which the goods remain under customs control.
Article 16
In order to ensure the proper application of the provisions of this Title, the Member States of the Community and Norway shall assist each other, through their respective customs administrations, in checking the authenticity and accuracy of movement certificates, including those issued under Article 8 (4).
The Joint Committee shall be authorized to take any decisions necessary for the methods of administrative cooperation to be applied at the due time in the Community and in Norway.
Article 17
Penalties shall be imposed on any person who draws up or causes to be drawn up a document which contains incorrect particulars for the purpose of obtaining a movement certificate enabling goods to be accepted as eligible for preferential treatment.
TITLE III

Final Provisions

Article 18
The Community and Norway shall take any measures necessary to enable movement certificates to be submitted, in accordance with Article 13 of this Protocol, as from the date of entry into force of the Agreement.
Article 19
The Community and Norway shall each take the steps necessary to implement this Protocol.
Article 20
The explanatory notes, Lists A, B and C, and the specimens of movement certificates shall form an integral part of this Protocol.
Article 21
Goods which conform to the provisions of Title I and which, on the date of entry into force of the Agreement, are either being transported or being held in the Community or Norway in temporary storage, in bonded warehouses or in free zones, may be allowed to benefit from the provisions of the Agreement, subject to the submission — within four months of that date — to the customs authorities of the importing State of a movement certificate, drawn up retroactively by the competent authorities of the exporting State, and of any documents that provide supporting evidence of the conditions of transport.
Article 22
The Contracting Parties undertake to introduce any measures necessary to ensure that the movement certificates which the customs authorities of the Member States of the Community and of Norway are authorized to issue in pursuance of the agreements referred to in Article 2 are issued under the conditions laid down by those agreements. They also undertake to provide the administrative cooperation necessary for this purpose, in particular to check on the itinerary of goods traded under the agreements referred to in Article 2 and the places in which they have been held.
Article 23
1.   Without prejudice to Article 1 of Protocol No 2, no drawback or remission of any kind may be granted from customs duties in the Community or in Norway in respect of products used in manufacture which do not originate in the Community, Norway or the countries specified in Article 2 of this Protocol, as from the date on which the duty applicable to originating products of the same kind has been reduced in the Community and in Norway to 40 % of the basic duty.
2.   Without prejudice to Article 1 of Protocol No 2, no drawback or remission of any kind may be granted from customs duties in Denmark or the United Kingdom in respect of products imported and used in the manufacture of goods for which a movement certificate is issued by the customs authorities of either of these two countries for the purpose of benefiting in Norway from the tariff provisions in force in Norway and covered by Article 3 (1) of the Agreement. This rule does not, however, apply where the products used are those referred to in Article 25 (1) (a) of this Protocol.
3.   Without prejudice to Article 1 of Protocol No 2, no drawback or remission of any kind may be granted from customs duties in Norway in respect of imported products used in the manufacture of goods for which a movement certificate is issued by the customs authorities of Norway for the purpose of benefiting in Denmark or the United Kingdom from the tariff provisions in force in these two countries and covered by Article 3 (1) of the Agreement. This rule does not, however, apply where the products used are those referred to in Article 25 (1) (a) of this Protocol.
4.   In this and the following articles, the term ‘customs duties’ also means charges having an effect equivalent to customs duties.
Article 24
1.   Movement certificates may, where appropriate, be required to indicate that the products to which they relate have acquired the status of originating products and have undergone any additional processing under the conditions set out in Article 25 (1) until the date from which the customs duties applicable to the said products are abolished between the Community as originally constituted and Ireland on the one hand, and Norway on the other hand.
2.   In other cases, they may, where appropriate, be required to indicate the added value acquired in each of the following territories:






—


the Community as originally constituted,










—


Ireland,










—


Denmark, the United Kingdom,










—


Norway,










—


each of the six countries specified in Article 2 of this Protocol.




Article 25
1.   The following products may benefit, on importation into Norway or into Denmark or the United Kingdom, from the tariff provisions in force in Norway or in the latter two countries covered by Article 3 (1) of the Agreement:






(a)


products which meet the conditions of this Protocol and for which a movement certificate has been issued indicating that they have acquired the status of originating products and have undergone any additional processing solely in Norway or in the two countries referred to above or in the other six countries specified in Article 2 of this Protocol;










(b)


products, other than products of Chapters 50 to 62, which meet the conditions of this Protocol and for which a movement certificate has been issued indicating:






1.


that they have been obtained by the processing of goods which, on exportation from the Community as originally constituted or from Ireland, had already acquired there the status of originating products;










2.


and that the added value acquired in Norway or in the two countries referred to above or in the other six countries specified in Article 2 of this Protocol represents 50 % or more of the value of those products;














(c)


products of Chapters 50 to 62 listed in Column 2 below which meet the conditions of this Protocol and for which a movement certificate has been issued indicating that they have been obtained by the processing of goods listed in Column 1 below which, on exportation from the Community as originally constituted or from Ireland, had already acquired there the status of originating products.










 


Column 1


Column 2




Products used


Products obtained




1.


50.03


Silk waste (including cocoons unsuitable 1 for reeling, silk noils and pulled or garnetted rags)


 


All products falling within Chapters 50 to 62




56.03


Waste (including yarn waste and pulled or garnetted rags) of man-made fibres (continuous or discontinuous), not carded, combed or otherwise prepared for spinning




2.


53.05


Sheep's or iambs' wool or other animal hair (fine or coarse), carded or combed


 


All products falling within Chapters 50 to 57




3.


ex 56.01


Synthetic textile fibres (discontinuous), not carded, combed or otherwise prepared for spinning


 


 








—


All products falling within Chapters 50 to 57, except heading No 56.04:
Man-made fibres and waste of man-made fibres (continuous or discontinuous), carded, combed or otherwise prepared for spinning














—


The following products of Chapters 58 to 62:








ex 59.01:


Sanitary towels














ex 56.02


Continuous filament tow for the manufacture of synthetic textile fibres (discontinuous)


ex 59.04:


Twine, cordage, ropes and cables, plaited or not, other than single yarn composed solely of continuous synthetic textile fibres




4.


ex 56.01
ex 56.02


Fibres and continuous filament tow of polypropylene, on condition that their value does not exceed 40 % of the value of the finished product


 


 


ex 59.02


Needleloom felt, whether or not impregnated or coated




5.


ex Chapters 50 to 57


Yarn


 


 


ex 50.09


Woven fabrics, dyed, containing 80 % or more by weight of silk or waste silk other than noil




ex 51.04


Woven fabrics of man-made fibres (continuous), flocked




ex 55.09


Other woven fabrics of cotton, flocked




ex 55.09


Organdies, bleached, mercerized and parchmentized




ex 56.07


Woven fabrics of man-made fibres (discontinuous or waste), flocked




58.01


Carpets, carpeting and rugs, knotted (made up or not)




ex 59.01


Sanitary towels




ex 59.15


Textile hosepiping and similar tubing in which the linen or hemp or the two materials together do not represent more than 50 % of the weight of the textile components




ex 59.17


Bolting cloth




ex 59.17


Textile articles other than the products defined in Note 5 (a) to Chapter 59




ex 60.03


Stockings, under stockings, socks, ankle-socks, sockettes and the like, complete and ready to wear




ex 60.06


Articles of the nature of those falling within headings Nos 60.02 to 60.05, knitted or crocheted and elastic or rubberized, complete and ready to wear or ready for use




6.


ex Chapters 50 to 59


Single yarn


 


 


59.05


Nets and netting made of twine, cordage or rope, and made up fishing nets of yarn, twine, cordage or rope:




59.06


Other articles made from yarn, twine, cordage, rope or cables, other than textile fabrics and articles made from such fabrics




7.


ex Chapters 55 and 56


Single yarn


 


 


ex 58.08


Knotted net fabrics having a uniform square or diamond-shaped mesh knotted at each corner, entirely made of cotton or synthetic textile fibres




8.


ex 51.01


Yarn of synthetic textile fibre (con- 1 tinuous), not put up for retail sale


 


 


ex 58.08


Knotted net fabrics having a uniform square or diamond-shaped mesh knotted at each corner, entirely made of cotton or of synthetic textile fibres




ex 51.02


Monofil, strip (artificial straw and the like) and imitation catgut, of synthetic textile materials


ex 59.04


Twine, cordage, ropes and cables, plaited or not other than single yarn composed solely of synthetic textile fibres




 


 


 


59.05


Nets and netting made of twine, cordage or rope, and made up fishing nets of yarn, twine, cordage or rope




 


 


 


59.06


Other articles made from yarn, twine, cordage, rope or cables, other than textile fabrics and articles made from such fabrics




9.


ex 51.01
ex 51.02
ex 56.05


Yarn, monofil, strip (artificial straw and the like) and imitation catgut, of cuprammonium fibres


 


 


58.06


Woven labels, badges and the like, not embroidered, in the piece, in strips or cut to shape or size




10.


ex 51.02


Monofil of polyesters


 


 


ex 59.17


Fabrics (other than felted fabrics of textile fibres), of a kind commonly used in machinery for making or finishing cellulosic pulp, paper or paperboard, including fabrics of tubular or endless kind




11.


ex Chapters 50 to 59


Fabric and other products except those falling within headings Nos 59.10 and 59.11


 


 


59.10


Linoleum and materials prepared on a textile base in a similar manner to linoleum, whether or not cut to shape or of a kind used as floor coverings; floor coverings consisting of a coating applied on a textile base, cut to shape or not




ex 59.11


Plates, sheets and strip, of expanded, foam or sponge rubber, combined with textile fabric




12.


ex Chapters 50 to 59


Fabric, provided that the value of the fabric (linings, trimmings and accessories not included) does not exceed 45 % of the value of the finished product


 


 


ex 61.01


Men's and boys' outer garments, complete and ready to wear




ex 61.02


Women's, girls' and infants' outer garments, complete and ready to wear, of the following kinds: frocks, skirts, jackets, trousers (other than trousers the fabric of which falls within heading No 55.08 or 55.09), costumes (composed of a jacket and skirt or a jacket and trousers) and coats




13.


ex Chapters 50 to 59


Fabric, provided that the value of the fabric does not exceed 40 % of the value of the finished product


 


 


ex 61.09


Brassieres, corsets, corset-belts, corselet-tes, girdle corsets, hip belts and other articles designed for wear as body-supporting garments, whether or not elastic, complete and ready to wear




The provisions of this paragraph shall apply only to products which by virtue of the provisions of this Agreement and of the annexed Protocols will benefit from the abolition of customs duties at the conclusion of the tariff dismantling period laid down for each product.
The above provisions shall no longer be applicable once the tariff dismantling period laid down for each product expires.
2.   In any cases other than those referred to in paragraph 1, Norway or the Community may adopt transitional provisions for the purpose of not levying the duties provided for in Article 3 (2) of the Agreement on the value corresponding to the value of the products oringinating in Norway or in the Community which have been worked or processed to obtain other products fulfilling the conditions laid down in this Protocol and which are subsequently imported into Norway or into the Community.
Article 26
The Contracting Parties shall take any measures necessary for the conclusion of arrangements with Austria, Finland, Iceland, Portugal, Sweden and Switzerland enabling this Protocol to be applied.
Article 27
1.   For the purpose of implementing Article 2 (1) (A) of this Protocol, any product originating in one of the six countries referred to in that Article shall be treated as a non-originating product during the period or periods in which Norway applies the rate of duty applicable to third countries or any corresponding safeguard measure to that product in respect of the said country under the provisions governing trade between Norway and the six countries referred to in the aforementioned Article 2.
2.   For the purpose of implementing Article 2 (1) (B) of this Protocol, any product originating in one of the six countries referred to in that Article shall be treated as a non-originating product during the period or periods in which the Community applies the rate of duty applicable to third countries to that product in respect of the said country under the Agreement concluded by the Community with that country.
Article 28
The Joint Committee may decide to amend the provisions of Title I, Article 5 (3), of Title II, of Title III, Articles 23, 24 and 25, and of Annexes I, II, III, V and VI to this Protocol. It shall, in particular, be authorized to take any measures necessary to adapt them to the particular requirements of specific goods or certain forms of transport.

ANNEX I
EXPLANATORY NOTES

Note 1 — Article 1

The terms ‘the Community’ or ‘Norway’ shall also cover the territorial waters of the Member States of the Community or of Norway respectively.
Vessels operating on the high seas, including factory ships, on which the fish caught is worked or processed shall be considered as part of the territory of the State to which they belong provided that they satisfy the conditions set out in Explanatory Note 5.

Note 2 — Articles 1, 2 and 3

In order to determine whether goods originate in the Community or in Norway or in one of the countries specified in Article 2, it shall not be necessary to establish whether the power and fuel, plant and equipment, and machines and tools used to obtain such goods originate in third countries or not.

Note 3 — Articles 2 and 5

For the purpose of implementing Article 2 paragraph 1 (A) (b) and (B) (b), the percentage rule must be observed by referring, for the added value acquired, to the provisions contained in Lists A and B. Where the products obtained appear in List A, the percentage rule therefore constitutes a criterion additional to that of change of tariff heading for any non-originating product used. Likewise the provisions ruling out the possibility of cumulating the percentages shown in Lists A and B for any one product obtained are applicable in each country for the added value acquired.

Note 4 — Articles 1, 2 and 3

Packing shall be considered as forming a whole with the goods contained therein. This provision, however, shall not apply to packing which is not of the normal type for the article packed and which has intrinsic utilization value and is of a durable nature, apart from its function as packing.

Note 5 — Article 4 (f)

The term ‘their vessels’ shall apply only to vessels:






(a)


which are registered or recorded in a Member State of the Community or in Norway;










(b)


which sail under the flag of a Member State of the Community or of Norway;










(c)


which are at least 50 % owned by nationals of Member States of the Community or of Norway or by a company with its head office in one of those States, of which the manager or managers, chairman of the board of directors or of the supervisory board, and the majority of the members of such boards are nationals of the Member States of the Community or of Norway, and of which, in addition, in the case of partnerships or limited companies, at least half the capital belongs to those States or to public bodies or nationals of the said States;










(d)


of which the captain and officers are all nationals of the Member States of the Community or of Norway; and










(e)


of which at least 75 % of the crew are nationals of the Member States of the Community or of Norway.





Note 6 — Article 6

‘Ex-works price’ shall mean the price paid to the manufacturer in whose undertaking the last working or processing is carried out, provided the price includes the value of all the products used in manufacture.
‘Customs value’ shall be understood as meaning the customs value laid down in the Convention concerning the Valuation of Goods for Customs Purposes signed in Brussels on 15 December 1950.

Note 7 — Article 8

The customs authorities which endorse movement certificates in accordance with the conditions laid down in Article 8 (3) have the right to undertake verification of the goods in accordance with the laws and regulations in force in the State concerned.

Note 8 — Article 10

Where a movement certificate relates to goods originally imported from a Member State of the Community or from Norway, and re-exported in the same state, the new certificates issued by the re-exporting State must, without prejudice to the provisions of Article 24, show in which State the original movement certificate was issued. Where the goods have not been placed in a bonded warehouse, the certificates must also show that the endorsements provided for in Article 8 (3) have duly been made.

Note 9 — Articles 16 and 22

Where a movement certificate has been issued under the conditions laid down in Article 8 (2) or (4) and relates to goods re-exported in the same state, the customs authorities of the country of destination must be able to obtain, by means of administrative cooperation, true copies of the movement certificate or certificates issued previously relating to those goods.

Note 10 — Articles 23 and 25

‘Tariff provisions in force’ shall mean the duty applied on 1 January 1973 in Denmark, the United Kingdom or Norway to the products referred to in Article 25 (1) or the duty which, in accordance with the provisions of the Agreement, will be subsequently applied to the said products whenever this duty is lower than that applied to other products originating in the Community or in Norway.

Note 11 — Article 23

‘Drawback or remission of any kind granted from customs duties’ shall mean any arrangement for refund or remission, partial or complete, of customs duties applicable to products used in manufacture, provided that the said provision concedes, expressly or in effect, this repayment or non-charging or the non-imposition when goods obtained from the said products are exported but not when they are retained for home use.

Note 12 — Articles 24 and 25

Article 24 (1) and Article 25 (1) shall mean, in particular, that application has not been made:






(i)


either of the provisions of the last sentence of Article 1 (2) (b) for products of the Community as originally constituted and of Ireland that have been worked or processed in Norway;










(ii)


or of any provisions corresponding to this sentence contained in the agreements referred to in Article 2 for products of the Community as originally constituted and of Ireland that are worked or processed in any of the six countries.





Note 13 — Article 25

Where originating products not fulfilling the conditions laid down in Article 25 (1) are imported into Denmark or the United Kingdom, the duty which serves as a basis for the tariff reductions provided for in Article 3 (2) of the Agreement is that actually applied on 1 January 1972 by the importing country in respect of third countries.


ANNEX II

LIST A


List of working or processing operations which result in a change of tariff heading without conferring the status of ‘originating’ products on the products undergoing such operations, or conferring this status only subject to certain conditions









Products obtained


Working or processing that does not confer the status of originating products


Working or processing that confers the status of originating products when the following conditions are met




CCT heading No


Description




ex 17.04


Sugar confectionery, not containing cocoa, excluding liquorice extract containing more than 10 % by weight of sucrose but not containing other added substances


Manufacture from other products of Chapter 17 the value of which exceeds 30 % of the value of the finished product


 




ex 18.06


Chocolate and other food preparations containing cocoa, excluding products other than cocoa powder, not otherwise sweetened than by the addition of sucrose, ice-cream (not including ice-cream powder) and other ices, chocolate and chocolate goods, whether or not filled and sugar confectionery and substitutes therefor made from sugar substitution products, containing cocoa, in immediate packings of a net capacity of more than 500 g


Manufacture from products of Chapter 17 the value of which exceeds 30 % of the value of the finished product


 




19.01


Malt extract


Manufacture from products of heading No 11.07


 




19.02


Preparations of flour meal, starch or malt extract, of a kind used as infant food or for dietetic or culinary purposes, containing less than 50 % by weight of cocoa


Manufacture from cereals and derivatives thereof, meat and milk, or in which the value of products of Chapter 17 used exceeds 30 % of the value of the finished product


 




19.03


Macaroni, spaghetti and similar products


 


Manufacture from durum wheat




19.04


Tapioca and sago; tapioca and sago substitutes obtained from potato or other starches


Manufacture from potato starch


 




19.05


Prepared foods obtained by the swelling or roasting of cereals or cereal products (puffed rice, cornflakes and similar products)


Manufacture from any product other than of Chapter 17 (1) or in which the value of products of Chapter 17 used exceeds 30 % of the value of the finished product


 




19.06


Communion wafers, empty cachets of a kind suitable for pharmaceutical use, sealing wafers, rice paper, and similar products


Manufacture from products of Chapter 11


 




19.07


Bread, ships' biscuits and other ordinary bakers' wares, not containing added sugar, honey, eggs, fats, cheese or fruit


Manufacture from products of Chapter 11


 




19.08


Pastry, biscuits, cakes and other fine bakers' wares, whether or not containing cocoa in any proportion


Manufacture from products of Chapter 11


 




ex 21.05


Soups and broths, in liquid, solid or powder form


Manufacture from products of heading No 20.02


 




ex 22.02


Lemonade, flavoured spa waters and flavoured aerated waters, and other non-alcoholic beverages, not including fruit and vegetable juices falling within heading No 20.07, not containing milk or milkfats, containing sugar (sucrose or invert sugar); other


Manufacture from fruit juices (2) or in which the value of products of Chapter 17 used exceeds 30 % of the value of the finished product


 




22.06


Vermouths, and other wines of fresh grapes flavoured with aromatic extracts


Manufacture from products of heading No 08.04, 20.07, 22.04 or 22.05


 




ex 22.09


Spirits excluding rum, arrack, tafia, gin, whisky, vodka with an ethol alcohol content of 45·2o or less and plum, pear or cherry brandy, containing eggs or egg yolk and/or sugar (sucrose or invert sugar)


Manufacture from products of heading No 08.04, 20.07, 22.04 or 22.05


 




ex 28.13


Hydrobroric acid


Manufacture from products of heading No 28.01 (3)



 




ex 28.19


Zinc oxide


Manufacture from products of heading No 79.01


 




28.27


Lead oxides; red lead and orange lead


Manufacture from products of heading No 78.01


 




ex 28.28


Lithium hydroxide


Manufacture from products of heading No 28.42 (4)



 




ex 28.29


Lithium fluoride


Manufacture from products of heading No 28.28 or 28.42 (4)



 




ex 28.30


Lithium chloride


Manufacture from products of heading No 28.28 or 28.42 (4)



 




ex 28.33


Bromides


Manufacture from products of heading No 28.01 or 28.13 (4)



 




ex 28.38


Aluminium sulphate


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 28.42


Lithium carbonate


Manufacture from products of heading No 28.28 (4)



 




ex 29.02


Organic bromides


Manufacture from products of heading No 28.01 or 28.13 (4)



 




ex 29.02


Trichlorodi (chloro-phenyl) ethane


 


Transformation of ethanol into chloral and condensation of chloral with monochlorobenzene (4)





ex 29.35


Pyridine; alphapicoline; betapicoline; gammapicoline


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 29.35


Vinylpyridine


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 29.38


Nicotinic acid


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




30.03


Medicaments (including veterinary medicaments)


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




31.05


Orther fertilizers; goods of the present Chapter in tablets, lozenges and similar prepared forms or in packings of a gross weight not exceeding 10 kg


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




32.06


Colour lakes


Manufacture from materials of heading No 32.04 or 32.05 (4)



 




32.07


Other colouring matter; inorganic products of a kind used as luminophores


Mixing of oxides or salts of Chapter 28 with extenders such as barium sulphate, chalk barium carbonate and satin white (5)



 




33.02


Terpenic by-products of the deterpenation of essential oils


Manufacture from products of heading No 33.01 (5)



 




33.05


Aqueous distillates and aqueous solutions of essential oils, including such products suitable for medicinal uses


Manufacture from products of heading No 33.01 (5)



 




35.05


Dextrins and dextrin glues; soluble or roasted starches; starch glues


 


Manufacture from maize or potatoes




37.01


Photographic plates and film in the flat, sensitized, unexposed, of any material other than paper, paperboard or cloth


Manufacture from products of heading No 37.02 (5)



 




37.02


Film in rolls, sensitized, unexposed, perforated or not


Manufacture from products of heading No 37.01 (5)



 




37.04


Sensitized plates and film, exposed but not developed, negative or positive


Manufacture from products of heading No 37.01 or 37.02 (5)



 




38.11


Disinfectants, insecticides, fungicides, weed-killers, antisprouting products, rat poisons and similar products, put up in forms or packings for sale by retail or as preparations or as articles (for example, sulphur-treated bands, wicks and candles, fly-papers)


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




38.12


Prepared glazings, prepared dressings and prepared mordants, of a kind used in the textile, paper, leather or like industries


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




38.13


Pickling preparations for metal surfaces; fluxes and other auxiliary preparations for soldering, brazing or welding; soldering, brazing or welding powders and pastes consisting of metal and other materials; preparations of a kind used as cores or coatings for welding rods and electrodes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 38.14


Anti-knock preparations, oxidation inhibitors, gum inhibitors, viscosity improvers, anti-corrosive preparations and similar prepared additives for mineral oils, excluding prepared additives for lubricants


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




38.15


Prepared rubber accelerators


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




38.17


Preparations and charges for fire-extinguishers; charged fire-extinguishing grenades


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




38.18


Composite solvents and thinners for varnishes and similar products


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 38.19


Chemical products and preparations of the chemical or allied industries (including those consisting of mixtures of natural products), not elsewhere specified or included; residual products of the chemical or allied industries, not elsewhere specified or included, excluding:






—


Fusel oil and Dippel's oil;










—


Naphthenic acids and their non-water-soluble salts, esters of naphthenic acids;










—


Sulphonaphthenic acids and their non-water-soluble salts; esters of sulphonaphthenic acids;










—


Petroleum sulphonates, excluding petroleum sulphonates of alkali metals, of ammonium or of ethanolamines, thiophenated sulphonic acids of oils obtained from bituminous minerals, and their salts;










—


Mixed alkylbenzenes and mixed alkylnaphthalenes;










—


Ion exchangers;










—


Catalysts;










—


Getters for vacuum tubes;










—


Refractory cements or mortars and similar preparations;










—


Alkaline iron oxide for the purification of gas;










—


Carbon (excluding that in artificial graphite of heading No 38.01) of metallo-graphite or other compounds, in the form of small plates, bars or other semi-manufactures






 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 39.02


Polymerization products


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




39.07


Articles of materials of the kinds described in headings Nos 39.01 to 39.06


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




40.05


Plates, sheets and strip, of unvulcanized natural or synthetic rubber, other than smoked sheets and crepe sheets of heading No 40.01 or 40.02; granules of unvulcanized natural or synthetic rubber compounded ready for vulcanization; unvulcanized natural or synthetic rubber, compounded before or after coagulation either with carbon black (with or without the addition of mineral oil) or with silica (with or without the addition of mineral oil), in any form, of a kind known as masterbatch


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




41.08


Patent leather and imitation patent leather; metallized leather


 


Varnishing or metallizing of leather of headings Nos 41.02 to 41.07 (other than skin leather of crossed Indian sheep and of Indian goat or kid, not further prepared than vegetable tanned, or if otherwise prepared obviously unsuitable for immediate use in the manufacture of leather articles) in which the value of the skin leather used does not exceed 50 % of the value of the finished product




43.03


Articles of furskin


Making up from furskin in plates, crosses and similar forms (heading No ex 43.02) (6)



 




44.21


Complete wooden packing cases, boxes, crates, drums and similar packings


 


Manufacture from boards not cut to size




45.03


Articles of natural cork


 


Manufacture from products of heading No 45.01




48.06


Paper and paperboard, ruled, lined or squared, but not otherwise printed, in rolls or sheets


 


Manufacture from paper pulp




48.14


Writing blocks, envelopes, letter cards, plain postcards, correspondence cards; boxes, pouches, wallets and writing compendiums, of paper or paperboard, containing only an assortment of paper stationery


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




48.15


Other paper and paperboard, cut to size or shape


 


Manufacture from paper pulp




48.16


Boxes, bags and other packing containers, of paper or paper-board


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




49.09


Picture postcards, Christmas and other picture greeting cards, printed by any process, with or without trimmings


Manufacture from products of heading No 49.11


 




49.10


Calendars of any kind, of paper or paperboard, including calendar blocks


Manufacture from products of heading No 49.11


 




50.04 (7)



Silk yarn, other than yarn of noil or other waste silk, not put up for retail sale


 


Manufacture from products of heading No 50.01 or 50.02




50.05 (7)



Yarn spun from silk waste other than noil, not put up for retail sale


 


Manufacture from products of heading No 50.03, neither carded nor combed




50.06 (7)



Yarn spun from noil silk, not put up for retail sale


 


Manufacture from products of heading No 50.03, neither carded nor combed




50.07 (8)



Silk yarn and yarn spun from noil or other waste silk, put up for retail sale


 


Manufacture from products of heading No 50.01 or 50.02 or from products of heading No 50.03, neither carded nor combed




ex 50.08 (8)



Imitation catgut of silk


 


Manufacture from products of heading No 50.01 or from products of heading No 50.03, neither carded nor combed




50.09 (9)



Woven fabrics of silk or of waste silk other than noil


 


Manufacture from products of heading No 50.02 or 50.03




50.10 (9)



Woven fabrics of noil silk


 


Manufacture from products of heading No 50.02 or 50.03




51.01 (8)



Yarn of man-made fibres (continuous), not put up for retail sale


 


Manufacture from chemical products or textile pulp




51.02 (8)



Monofil, strip (artificial straw and the like) and imitation catgut, of man-made fibre materials


 


Manufacture from chemical products or textile pulp




51.03 (8)



Yarn of man-made fibres (continuous), put up for retail sale


 


Manufacture from chemical products or textile pulp




51.04 (9)



Woven fabrics of man-made fibres (continuous), including woven fabrics of monofil or strip of heading No 51.01 or 51.02


 


Manufacture from chemical products or textile pulp




52.01 (8)



Metallized yarn, being textile yarn spun with metal or covered with metal by any process


 


Manufacture from chemical products, from textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste, neither carded nor combed




52.02 (9)



Woven fabrics of metal thread or of metallized yarn, of a kind used in articles of apparel, as furnishing fabrics or the like


 


Manufacture from chemical products, from textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste




53.06 (10)



Yarn of carded sheep's or lambs' wool (woollen yarn), not put up for retail sale


 


Manufacture from products of heading No 53.01 or 53.03




53.07 (10)



Yarn of combed sheep's or lambs' wool (worsted yarn), not put up for retail sale


 


Manufacture from products of heading No 53.01 or 53.03




53.08 (10)



Yarn of fine animal hair (carded or combed), not put up for retail sale


 


Manufacture from raw fine animal hair of heading No 53.02




53.09 (10)



Yarn of horsehair or of other coarse animal hair, not put up for retail sale


 


Manufacture from raw coarse animal hair of heading No 53.02 or from raw horsehair of heading No 05.03




53.10 (10)



Yarn of sheep's or lambs' wool, of horsehair or of other animal hair (fine or coarse), put up for retail sale


 


Manufacture from materials of headings Nos 05.03 and 53.01 to 53.04




53.11 (11)



Woven fabrics of sheep's or lambs' wool or of fine animal hair


 


Manufacture from materials of headings Nos 53.01 to 53.05




53.12 (11)



Woven fabrics of coarse animal hair other than horsehair


 


Manufacture from products of headings Nos 53.02 to 53.05




53.13 (11)



Woven fabrics of horsehair


 


Manufacture from horsehair of heading No 05.03




54.03 (10)



Flax or ramie yarn, not put up for retail sale


 


Manufacture from products of heading No 54.01 or 54.02, neither carded nor combed




54.04 (10)



Flax or ramie yarn, put up for retail sale


 


Manufacture from materials of heading No 54.01 or 54.02




54.05 (11)



Woven fabrics of flax or of ramie


 


Manufacture from materials of heading No 54.01 or 54.02




55.05 (10)



Cotton yarn, not put up for retail sale


 


Manufacture from materials of heading No 55.01 or 55.03




55.06 (10)



Cotton yarn, put up for retail sale


 


Manufacture from materials of heading No 55.01 or 55.03




55.07 (11)



Cotton gauze


 


Manufacture from materials of heading No 55.01, 55.03 or 55.04




55.08 (11)



Terry towelling and similar terry fabrics, of cotton


 


Manufacture from materials of heading No 55.01, 55.03 or 55.04




55.09 (11)



Other woven fabrics of cotton


 


Manufacture from materials of heading No 55.01, 55.03 or 55.04




56.0.


Man-made fibres (discontinuous), not carded, combed or otherwise prepared for spinning


 


Manufacture from chemical products or textile pulp




56.02


Continuous filament tow for the manufacture of man-made fibres (discontinuous)


 


Manufacture from chemical products or textile pulp




56.03


Waste (including yarn waste and pulled or garnetted rags) of man-made fibres (continuous or discontinuous), not carded, combed or otherwise prepared for spinning


 


Manufacture from chemical products or textile pulp




56.04


Man-made fibres (discontinuous or waste), carded, combed or otherwise prepared for spinning


 


Manufacture from chemical products or textile pulp




56.05 (12)



Yarn of man-made fibres (discontinuous or waste), not put up for retail sale


 


Manufacture from chemical products or textile pulp




56.06 (12)



Yarn of man-made fibres (discontinuous or waste), put up for retail sale


 


Manufacture from chemical products or textile pulp




56.07 (13)



Woven fabrics of man-made fibres (discontinuous or waste)


 


Manufacture from products of headings Nos 56.01 to 56.03




57.05 (12)



Yarn of true hemp


 


Manufacture from raw true hemp




57.06 (12)



Yarn of jute or of other textile bast fibres of heading No 57.03


 


Manufacture from raw jute or from other raw textile bast fibres of heading No 57.03




57.07 (12)



Yarn of other vegetable textile fibres


 


Manufacture from raw vegetable textile fibres of heading No 57.02 or 57.04




57.08


Paper yarn


 


Manufacture from products of Chapter 47, from chemical products, textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste, neither carded nor combed




57.09 (13)



Woven fabrics of true hemp


 


Manufacture from products of heading No 57.01




57.10 (14)



Woven fabrics of jute or of other textile bast fabrics of heading No 57.03


 


Manufacture from raw jute or from other raw textile bast fibres of heading No 57.03




57.11 (14)



Woven fabrics of other vegetable textile fibres


 


Manufacture from materials of heading No 57.02 or 57.04 or from coir yarn of heading No 57.07




57.12


Woven fabrics of paper yarn


 


Manufacture from paper, from chemical products, textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste




58.01 (15)



Carpets, carpeting and rugs, knotted (made up or not)


 


Manufacture from materials of headings Nos 50.01 to 50.03, 51.01, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or 57.01 to 57.04




58.02 (15)



Other carpets, carpeting, rugs, mats and matting, and ‘Kelem’, ‘Schumacks’ and ‘Karamanie’ rugs and the like (made up or not)


 


Manufacture from materials of headings Nos 50.01 to 50.03, 51.01, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from coir yarn of heading No 57.07




58.04 (15)



Woven pile fabrics and chenille fabrics (other than terry towelling or similar terry fabrics of cotton of heading No 55.08 and fabrics of heading No 58.05)


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from chemical products or textile pulp




58.05 (15)



Narrow woven fabrics, and narrow fabrics (bolduc) consisting of warp without weft assembled by means of an adhesive, other than goods falling within heading No 58.06


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from chemical products or textile pulp




58.06 (15)



Woven labels, badges and the like, not embroidered, in the piece, in strips or cut to shape or size


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp




58.07 (16)



Chenille yarn (including flock chenille yarn), gimped yarn (other than metallized yarn of heading No 52.01 and gimped horsehair yarn); braids and ornamental trimmings in the piece; tassels, pompons and the like


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp




58.08 (16)



Tulle and other net fabrics (but not including woven, knitted or crocheted fabrics), plain


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp




58.09 (16)



Tulle and other net fabrics (but not including woven, knitted or crocheted fabrics), figured; hand or mechanically made lace, in the piece, in strips or in motifs


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03 or from chemical products or textile pulp




58.10


Embroidery, in the piece, in strips or in motifs


 


Manufacture in which the value of the product used does not exceed 50 % of the value of finished product




59.01 (16)



Wadding and articles of wadding; textile flock and dust and mill neps


 


Manufacture either from natural fibres or from chemical products or textile pulp




59.02 (16)



Felt and articles of felt, whether or not impregnated or coated


 


Manufacture either from natural fibres or from chemical products or textile pulp




59.03 (16)



Bonded fibre fabrics, similar bonded yarn fabrics, and articles of such fabrics, whether or not impregnated or coated


 


Manufacture either from natural fibres or from chemical products or textile pulp




59.04 (16)



Twine, cordage, ropes and cables, plaited or not


 


Manufacture either from natural fibres or from chemical products or textile pulp or from coir yarn of heading No 57.07




59.05 (16)



Nets and netting made of twine, cordage or rope, and made up fishing nets of yarn, twine, cordage or rope


 


Manufacture either from natural fibres or from chemical products or textile pulp or from coir yarn of heading No 57.07




59.06 (16)



Other articles made from yarn, twine, cordage, rope or cables, other than textile fabrics and articles made from such fabrics


 


Manufacture either from natural fibres or from chemical products or textile pulp or from coir yarn of heading No 57.07




59.07


Textile fabrics coated with gum or amylaceous substances of a kind used for the outer covers of books and the like; tracing cloth; prepared painting canvas; buckram and similar fabrics for hat foundations and similar uses


 


Manufacture from yarn




59.08


Textile fabrics impregnated, coated, covered or laminated with preparations of cellulose derivatives or of other artificial plastic materials


 


Manufacture from yarn




59.09


Textile fabrics coated or impregnated with oil or preparations with a basis of drying oil


 


Manufacture from yarn




59.10 (17)



Linoleum and materials prepared on a textile base in a similar manner to linoleum, whether or not cut to shape or of a kind used as floor coverings; floor coverings consisting of a coating applied on a textile base, cut to shape or not


 


Manufacture either from yarn or from textile fibres




59.11


Rubberized textile fabrics, other than rubberized knitted or crocheted goods


 


Manufacture from yarn




59.12


Textile fabrics otherwise impregnated or coated; painted canvas being theatrical scenery, studio backcloths or the like


 


Manufacture from yarn




59.13 (17)



Elastic fabrics and trimmings (other than knitted or crocheted goods) consisting of textile materials combined with rubber threads


 


Manufacture from single yarn




59.15 (17)



Textile hose-piping and similar tubing, with or without lining, armour or accessories of other materials


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from chemical products or textile pulp




59.16 (17)



Transmission, conveyor or elevator belts or belting, of textile material, whether or not strengthened with metal or other material


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from chemical products or textile pulp




59.17 (18)



Textile fabrics and textile articles, of a kind commonly used in machinery or plant


 


Manufacture from materials of headings Nos 50.01 to 50.03, 53.01 to 53.05, 54.01, 55.01 to 55.04, 56.01 to 56.03, 57.01 to 57.04 or from chemical products or textile pulp




ex Chapter 60


Knitted and crocheted goods, excluding knitted or crocheted goods obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)


 


Manufacture from natural fibres, carded or combed, from materials of headings Nos 56.01 to 56.03, from chemical products or textile pulp (18)





ex 60.02


Gloves, mittens and mitts, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)


 


Manufacture from yarn (19)





ex 60.03


Stockings, under-stockings, socks, anklesocks, sockettes and the like, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)


 


Manufacture from yarn (19)





ex 60.04


Under garments, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)


 


Manufacture from yarn (19)





ex 60.05


Outer garments and other articles, knitted or crocheted, not elastic or rubberized, obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)


 


Manufacture from yarn (19)





ex 60.06


Other articles, knitted or crocheted, elastic or rubberized (including elastic knee-caps and elastic stockings), obtained by sewing or by the assembly of pieces of knitted or crocheted goods (cut or obtained directly to shape)


 


Manufacture from yarn (19)





61.01


Men's and boys' outer garments


 


Manufacture from yarn (20)
 (21)





ex 61.02


Women's girls' and infants' outer garments, not embroidered


 


Manufacture from yarn (20)
 (21)





ex 61.02


Women's, girls' and infants' outer garments, embroidered


 


Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished product (20)





61.03


Men's and boys' under garments, including collars, shirt fronts and cuffs


 


Manufacture from yarn (20)
 (21)





61.04


Women's, girls' and infants' under garments


 


Manufacture from yarn (20)
 (21)





ex 61.05


Handkerchiefs, not embroidered


 


Manufacture from unbleached single yarn (20)
 (21)
 (22)





ex 61.05


Handkerchiefs, embroidered


 


Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished product (20)





ex 61.06


Shawls, scarves, mufflers, mantillas, veils and the like, not embroidered


 


Manufacture from unbleached single yarn of natural textile fibres or discontinuous man-made fibres or their waste, or from chemical products or textile pulp (20)
 (21)





ex 61.06


Shawls, scarves, mufflers, mantillas, veils and the like, embroidered


 


Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished product (20)





61.07


Ties, bow ties and cravats


 


Manufacture from yarn (20)
 (21)





ex 61.08


Collars, tuckers, fallals, bodice-fronts, jabots, cuffs, flounces, yokes and similar accessories and trimmings for women's and girls' garments, not embroidered


 


Manufacture from yarn (20)
 (21)





ex 61.08


Collars, tuckers, fallals, bodice-fronts, jabots, cuffs, flounces, yokes and similar accessories and trimmings for women's and girls' garments, embroidered


 


Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished product (20)





61.09


Corsets, corset-belts, suspender-belts, brassieres, braces, suspenders, garters and the like (including such articles of knitted or crocheted fabric), whether or not elastic


 


Manufacture from yarn (20)
 (21)





61.10


Gloves, mittens, mitts, stockings, socks and sockettes, not being knitted or crocheted goods


 


Manufacture from yarn (23)
 (24)





61.11


Made-up accessories for articles of apparel (for example, dress shields, shoulder and other pads, belts, muffs, sleeve protectors, pockets)


 


Manufacture from yarn (23)
 (24)





62.01


Travelling rugs and blankets


 


Manufacture from unbleached yarn of Chapters 50 to 56 (24)
 (25)





ex 62.02


Bed linen, table linen, toilet linen and kitchen linen; curtains and other furnishing articles; not embroidered


 


Manufacture from unbleached single yarn (24)
 (25)





ex 62.02


Bed linen, table linen, toilet linen and kitchen linen; curtains and other furnishing articles; embroidered


 


Manufacture from fabrics, not embroidered, the value of which does not exceed 40 % of the value of the finished product




62.03


Sacks and bags, of a kind used for the packing of goods


 


Manufacture from chemical products, textile pulp or from natural textile fibres, discontinuous man-made fibres or their waste (24)
 (25)





62.04


Tarpaulins, sails, awnings, sun-blinds, tents and camping goods


 


Manufacture from single unbleached yarn (24)
 (25)





62.05


Other made up textile articles (including dress patterns)


 


Manufacture in which the value of the products used does not exceed 40 % of the value of the finished product




64.01


Footwear with outer soles and uppers of rubber or artificial plastic material


Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal


 




64.02


Footwear with outer soles of leather or composition leather; footwear (other than footwear falling within heading No 64.01) with outer soles of rubber or artificial plastic material


Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal


 




64.03


Footwear with outer soles of wood or cork


Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal


 




64.04


Footwear with outer soles of other materials


Manufacture from assemblies of uppers affixed to inner soles or to other sole components, but without outer soles, of any material except metal


 




65.03


Felt hats and other felt headgear, being headgear made from the felt hoods and plateaux falling within heading No 65.01, whether or not lined or trimmed


 


Manufacture from textile fibres




65.05


Hats and other headgear (including hair-nets), knitted or crocheted, or made up from lace, felt or other textile fabric in the piece (but not from strips), whether or not lined or trimmed


 


Manufacture either from yarn or from textile fibres




66.01


Umbrellas and sunshades (including walking-stick umbrellas, umbrella tents, and garden and similar umbrellas)


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 70.07


Cast, rolled, drawn or blown glass (including flashed or wired glass) cut to shape other than rectangular shape, or bent or otherwise worked (for example, edge worked or engraved), whether or not surface ground or polished; multiple-walled insulating glass


Manufacture from drawn, cast or rolled glass of headings Nos 70.04 to 70.06


 




70.08


Safety glass consisting of toughened or laminated glass, shaped or not


Manufacture from drawn, cast or rolled glass of headings Nos 70.04 to 70.06


 




70.09


Glass mirrors (including rear-view mirrors), unframed, framed or backed


Manufacture from drawn, cast or rolled glass of headings Nos 70.04 to 70.06


 




71.15


Articles consisting of, or incorporating, pearls, precious or semi-precious stones (natural, synthetic or reconstructed)


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (26)





73.07


Blooms, billets, slabs and sheet-bars (including tinplate bars) of iron or steel; pieces roughly shaped by forging, of iron or steel


Manufacture from products of heading No 73.06


 




73.08


Iron or steel coils re-rolling


Manufacture from products of heading No 73.07


 




73.09


Universal plates of iron or steel


Manufacture from products of heading No 73.07 or 73.08


 




73.10


Bars and rods (including wire rod), of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished (including precision-made); hollow mining drill steel


Manufacture from products of heading No 73.07


 




73.11


Angles, shapes and sections, of iron or steel, hot-rolled, forged, extruded, cold-formed or cold-finished; sheet piling of iron or steel, whether or not drilled, punched or made from assembled elements


Manufacture from products of headings Nos 73.07 to 73.10, 73.12 or 73.13


 




73.12


Hoop and strip, of iron or steel, hot-rolled or cold-rolled


Manufacture from products of headings Nos 73.07 to 73.09 or 73.13


 




73.13


Sheets and plates, of iron or steel, hot-rolled or cold-rolled


Manufacture from products of headings Nos 73.07 to 73.09


 




73.14


Iron or steel wire, whether or not coated, but not insulated


Manufacture from products of heading No 73.10


 




73.16


Railway and tramway track construction material of iron or steel, the following: rails, check-rails, switch blades, crossings (or frogs), crossing pieces, point rods, rack rails, sleepers, fish-plates, chairs, chair wedges, sole plates (base plates), rail clips, bed plates, ties and other material specialized for joining or fixing rails


 


Manufacture from products of heading No 73.06




73.18


Tubes and pipes and blanks therefor, of iron (other than of cast iron) or steel, excluding high-pressure hydro-electric conduits


 


Manufacture from products of headings Nos 73.06 and 73.07 or heading No 73.15 in the forms specified in headings Nos 73.06 and 73.07




74.03


Wrought bars, rods, angles, shapes and sections, of copper; copper wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (27)





74.04


Wrought plates, sheets and strip, of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (27)





74.05


Copper foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0·15 mm


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (27)





74.06


Copper powder and flakes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (27)





74.07


Tubes and pipes and blanks therefor, of copper; hollow bars of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.08


Tube and pipe fittings (for example, joints, elbows, sockets and flanges), of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.09


Reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of copper, of a capacity exceeding 300 1, whether or not lined or heat-insulated, but not fitted with mechanical or thermal equipment


 


Manufacture in which the value of products used does not exceed 50 % of the value of the finished product (28)





74.10


Stranded wire, cables, cordage, ropes, plaited bands and the like, of copper wire, but excluding insulated electric wires and cables


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.11


Gauze, cloth, grill, netting, fencing, reinforcing fabric and similar materials (including endless bands), of copper wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.12


Expanded metal, of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.13


Chain and parts thereof, of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.14


Nails, tacks, staples, hook-nails, spiked cramps, studs, spikes and drawing pins, of copper, or of iron or steel with heads of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.15


Bolts and nuts (including bolt ends and screw studs), whether or not threaded or tapped, and screws (including screw hooks and screw rings), of copper; rivets, cotters, cotter-pins, washers and spring washers, of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (28)





74.16


Springs, of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





74.17


Cooking and heating apparatus of a kind used for domestic purposes, not electrically operated, and parts thereof, of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





74.18


Other articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





74.19


Other articles of copper


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





75.02


Wrought bars, rods, angles, shapes and sections, of nickel; nickel wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





75.03


Wrought plates, sheets and strip, of nickel; nickel foil; nickel powders and flakes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





75.04


Tubes and pipes and blanks therefor, of nickel; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets and flanges), of nickel


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





75.05


Electro-plating anodes, of nickel wrought or unwrought, including those produced by electrolysis


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





75.06


Other articles of nickel


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product (29)





76.02


Wrought bars, rods, angles, shapes and sections, of aluminium; aluminium wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.03


Wrought plates, sheets and strip, of aluminium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.04


Aluminium foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a thickness (excluding any backing) not exceeding 0·20 mm


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.05


Aluminium powders and flakes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.06


Tubes and pipes and blanks therefor, of aluminium; hollow bars of aluminium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.07


Tube and pipe fittings (for example, joints, elbows, sockets and flanges), of aluminium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.08


Structures, complete or incomplete, whether or not assembled, and parts of structures (for example, hangars and other buildings, bridges and bridge-sections, towers, lattice masts, roofs, roofing frameworks, door and window frames, balustrades, pillars and columns), of aluminium; plates, rods, angles, shapes, sections, tubes and the like, prepared for use in structures, of aluminium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.09


Reservoirs, tanks, vats and similar containers, for any material (other than compressed or liquefied gas), of aluminium, of a capacity exceeding 300 1, whether or not lined or heat insulated, but not fitted with mechanical or thermal equipment


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.10


Casks, drums, cans, boxes and similar containers (including rigid and collapsible tubular containers), of aluminium, of a description commonly used for the conveyance or packing of goods


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.11


Containers of aluminium for compressed or liquified gas


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.12


Stranded wire, cables, cordage, ropes, plaited bands and the like, of aluminium wire, but excluding insulated electric wires and cables


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.13


Gauze, cloth, grill, netting, reinforcing fabric and similar materials, of aluminium wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.14


Expanded metal, of aluminium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.15


Articles of a kind commonly used for domestic purposes, sanitary ware for indoor use, and parts of such articles and ware, of aluminium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




76.16


Other articles of aluminium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




77.02


Wrought bars, rods, angles, shapes and sections, of magnesium; magnesium wire; wrought plates, sheets and strip, of magnesium; magnesium foil; raspings and shavings of uniform size, powders and flakes, of magnesium; tubes and pipes and blanks therefor, of magnesium; hollow bars of magnesium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




77.03


Other articles of magnesium


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




78.02


Wrought bars, rods, angles, shapes and sections, of lead; lead wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




78.03


Wrought plates, sheets and strip, of lead


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




78.04


Lead foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a weight (excluding any backing) not exceeding 1700 kg/m2; lead powders and flakes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




78.05


Tubes and pipes and blanks therefor, of lead; hollow bars and tube and pipe fittings (for example, joints, elbows, sockets, flanges and S-bends)


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




78.06


Other articles of lead


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




79.02


Wrought bars, rods, angles, shapes and sections, of zinc; zinc wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




79.03


Wrought plates, sheets and strip, of zinc; zinc foil; zinc powders and flakes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




79.04


Tubes and pipes and blanks therefor, of zinc; hollow bars, and tube and pipe fittings (for example., joints, elbows, sockets and flanges), of zinc


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




79.05


Gutters, roof capping, skylight frames, and other fabricated building components, of zinc


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




79.06


Other articles of zinc


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




80.02


Wrought bars, rods, angles, shapes and sections, of tin; tin wire


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




80.03


Wrought plates, sheets and strip, of tin


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




80.04


Tin foil (whether or not embossed, cut to shape, perforated, coated, printed, or backed with paper or other reinforcing material), of a weight (excluding any backing) not exceeding 1 kg/m2; tin powders and flakes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




80.05


Tubes and pipes and blanks therefor, of tin; hollow bars, and tube and pipe fittings (for example, joints, elbows, sockets and flanges), of tin


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




82.05


Interchangeable tools for hand tools, for machine tools or for power-operated hand tools (for example, for pressing, stamping, drilling, tapping, threading, boring, broaching, milling, cutting, turning, dressing, morticing or screwdriving), including dies for wire drawing, extrusion dies for metal, and rock-drilling bits


 


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product (30)





82.06


Knives and cutting blades, for machines or for mechanical appliances


 


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product (30)





ex Chapter 84


Boilers, machinery and mechanical appliances and parts thereof, excluding refrigerators and refrigerating equipment (electrical and other) (No 84.15) and sewing machines, including furniture specially designed for sewing machines (ex No 84.41)


 


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product (31)





84.15


Refrigerators and refrigerating equipment (electrical and other)


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (32) used are originating products




ex 84.41


Sewing machines, including furniture for sewing machines


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:






(a)


at least 50 % in value of the materials and parts (32) used for the assembly of the head (motor excluded) are originating products, and










(b)


the thread tension, crochet and zigzag mechanisms are originating products








ex Chapter 85


Electrical machinery and equipment; parts thereof; excluding products of heading No 85.14 or 85.15


 


Working, processing or assembly in which the value of the non-originating material and parts used do not exceed 40 % of the value of the finished product




85.14


Microphones and stands therefor; loudspeakers; audio-frequency electric amplifiers


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:






(a)


at least 50 % in value of the materials and parts (32) used are originating products, and










(b)


the value of the non-originating transistors used does not exceed 3 % of the value of the finished product (33)









85.15


Radiotelegraphic and radiotelephonic transmission and reception apparatus; radio broadcasting and television transmission and reception apparatus (including receivers incorporating sound recorders or reproducers) and television cameras; radio navigational aid apparatus, radar apparatus and radio remote control apparatus


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:






(a)


at least 50 % in value of the materials and parts (34) used are originating products, and










(b)


the value of the non-originating transistors used does not exceed 3 % of the value of the finished product (35)









Chapter 86


Railway and tramway locomotives, rolling-stock and parts thereof; railway and tramway track fixtures and fittings; traffic signalling equipment of all kinds (not electrically powered)


 


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product




ex Chapter 87


Vehicles, other than railway or tramway rolling-stock, and parts thereof, excluding products of heading No 87.09


 


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product




87.09


Motor-cycles, auto-cycles and cycles fitted with an auxiliary motor, with or without side-cars; side-cars of all kinds


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the finished product, and provided that at least 50 % in value of the materials and parts (34) used are originating products




ex Chapter 90


Optical, photographic, cinematographic, measuring, checking, precision, medical and surgical instruments and apparatus and parts thereof, excluding products of heading No 90.05, 90.07, 90.08, 90.12 or 90.26


 


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product




90.05


Refracting telescopes (monocular and binocular), prismatic or not


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (34) used are originating products




90.07


Photographic cameras; photographic flashlight apparatus


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (36) used are originating products




90.08


Cinematographic cameras, projectors, sound recorders and sound reproducers; any combination of these articles


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (36) used are originating products




90.12


Compound optical microscopes, whether or not provided with means for photographing or projecting the image


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40% of the value of the finished product, and provided that at least 50 % in value of the materials and parts (36) used are originating products




90.26


Gas, liquid and electricity supply or production meters; calibrating meters therefor


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (36) used are originating products




ex Chapter 91


Clocks and watches and parts thereof, excluding products of heading No 91.04 or 91.08


 


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product




91.04


Other clocks


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (36) used are originating products




91.08


Clock movements, assembled


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that at least 50 % in value of the materials and parts (37) used are originating products




ex Chapter 92


Musical instruments; sound recorders and reproducers; television image and sound recorders and reproducers, magnetic; parts and accessories of such articles; excluding products of heading No 92.11


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product




92.11


Gramophones, dictating machines and other sound recorders and reproducers, including record players and tape decks, with or without sound-heads; television image and sound recorders and reproducers, magnetic


 


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:






(a)


at least 50 % in value of the materials and parts (37) used are originating products, and










(b)


the value of the non-originating transistors used does not exceed 3 % of the value of the finished product (38)









Chapter 93


Arms and ammunition; parts thereof


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




96.02


Other brooms and brushes (including brushes of a kind used as parts of machines); paint rollers; squeegees (other than roller squeegees) and mops


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




97.03


Other toys; working models of a kind used for recreational purposes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




98.01


Buttons and button moulds, studs, cuff-links and press-fasteners, including snap fasteners and press-studs; blanks and parts of such articles


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




98.08


Typewriter and similar ribbons, whether or not on spools; ink-pads, with or without boxes


 


Manufacture in which the value of the products used does not exceed 50 % of the value of the finished product




ex 98.15


Vacuum flasks and other vacuum vessels


 


Manufacture from products of heading No 70.12






(1)  This rule does not apply where the use of maize of the ‘zea indurata type is concerned.

(2)  This rule does not apply where fruit juices of pineapple, lime and grapefruit are concerned.

(3)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(4)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(5)  These provisions do nor apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(6)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(7)  For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated.

(8)  For yarn composed of two or more textile materials, the Conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated.

(9)  For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(10)  For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated.

(11)  For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(12)  For yarn composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which yarns of the other textile materials of which the mixed yarn is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated.

(13)  For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artifical plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(14)  For fabrics composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which fabric of the other textile materials of which the mixed fabric is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the material in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the material in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(15)  For products composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(16)  For products composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(17)  For products composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(18)  For products composed of two or more textile materials, the conditions shown in this list must also be met in respect of each of the headings under which products of the other textile materials of which the mixed product is composed would be classified. This rule, however, does not apply to any one or more mixed textile materials whose weight does not exceed 10 % of the total weight of textile materials incorporated. This percentage shall be increased:






(i)


to 20 % where the product in question is yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped, falling within headings Nos ex 51.01 and ex 58.07;










(ii)


to 30 % where the product in question is yarn of a width not exceeding 5 mm formed of a core consisting either of a thin strip of aluminium or of a film of artificial plastic material, whether or not covered with aluminium powder, this core having been inserted and glued by means of a transparent or coloured glue between two films of artificial plastic material.





(19)  Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

(20)  Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

(21)  These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B.

(22)  For products obtained from two or more textile materials, this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

(23)  Trimmings and accessories used (excluding linings and interlining) which change tariff heading do not remove the originating status of the product obtained if their weight does not exceed 10 % of the total weight of all the-textile materials incorporated.

(24)  These provisions do not apply where the products are obtained from printed fabric in accordance with the conditions shown in List B.

(25)  For products obtained from two or more textile materials, this rule does not apply to one or more of the mixed textile materials if its or their weight does not exceed 10 % of the total weight of all the textile materials incorporated.

(26)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(27)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(28)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(29)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(30)  These provisions do not apply where the products are obtained from products which have acquired the status of originating products in accordance with the conditions laid down in List B.

(31)  These provisions shall not apply to fuel elements of heading No 84.59 until 31 December 1977.

(32)  In determining the value of products, materials and parts, the following must be taken into account:






(a)


in respect of originating products, materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out;










(b)


in respect of other products, materials and parts, the provisions of Article 6 of this Protocol determining:






(i)


the value of imported products,










(ii)


the value of products of undetermined origin.









(33)  This percentage is not cumulative with the 40 %

(34)  In determining the value of products, materials and parts, the following must be taken into account:






(a)


in respect of originating products, materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out;










(b)


in respect of other products, materials and parts, the provisions of Article 6 of this Protocol determining:






(i)


the value of imported products,










(ii)


the value of products of undetermined origin.









(35)  This percentage is not cumulative with the 40 %.

(36)  In determining the value of products, materials and parts, the following must be taken into account:






(a)


in respect of originating products, materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out;










(b)


in respect of other products, materials and parts, the provisions of Article 6 of this Protocol determining:






(i)


the value of imported products,










(ii)


the value of products of undetermined origin.









(37)  In determining the value of products, materials and parts, the following must be taken into account:






(a)


in respect of originating products, materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out;










(b)


in respect of other products, materials and parts, the provisions of Article 6 of this Protocol determining:






(i)


the value of imported products,










(ii)


the value of products of undetermined origin.









(38)  This percentage is not cumulative with the 40 %.


ANNEX III

LIST B


List of working or processing operations which do not result in a change of tariff heading, but which do confer the status of ‘originating’ products on the products undergoing such operations








Finished products


Working or processing that confers the status of originating products




CCT heading No


Description




 


 


Incorporation of non-originating materials and parts in boilers, machinery, mechanical appliances etc. of Chapters 84 to 92 and in boilers and radiators of heading No 73.37 does not make such products lose their status of originating products, provided that the value of these products, parts and pieces does not exceed 5 % of the value of the finished product




ex 25.09


Earth colours, calcined or powdered


Crushing and calcination or powdering of earth colours




ex 25.15


Marble squared by sawing, of a thickness not exceeding 25 cm


Sawing into slabs or sections, polishing, grinding and cleaning of marble, including, marble not further worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm




ex 25.16


Granite, porphyry, basalt, sandstone and other monumental and building stone, squared by sawing, of a thickness not exceeding 25 cm


Sawing of granite, porphyry, basalt, sandstone and other building stone, including such stone not further worked than roughly split, roughly squared or squared by sawing, of a thickness exceeding 25 cm




ex 25.18


Calcined dolomite; agglomerated dolomite (including tarred dolomite)


Calcination of unworked dolomite




Chapters 28 to 37


Products of the chemical and allied industries


Working or processing in which the value of the non-originating products used does not exceed 20 % of the value of the finished product




ex Chapter 38


Miscellaneous chemical products with the exception of refined tall oil


Working or processing in which the value of the non-originating products used does not exceed 20 % of the value of the finished product




ex 38.05


Refined tall oil


Refining of crude tall oil




Chapter 39


Artificial resins and plastic materials, cellulose esters and ethers; articles thereof


Working or processing in which the value of the non-originating products used does not exceed 20 % of the value of the finished product




ex 40.01


Slabs of crepe rubber for soles


Lamination of crepe sheets of natural rubber




ex 40.07


Rubber thread and cord, textile-covered


Manufacture from rubber thread or cord




ex 41.01


Sheep- and lamb-skins without the wool


Removing wool from sheep- and lamb-skins in the wool




ex 41.02


Retanned bovine cattle leather (including buffalo leather) and equine leather, except leather of heading Nos 41.06 to 41.08


Retanning of bovine cattle leather (including buffalo leather) and equine leather, not further prepared than tanned




ex 41.03


Retanned sheep- and lambskikn leather, except leather of heading Nos 41.06 to 41.08


Retanning of sheep and lambskin leather, not further prepared than tanned




ex 41.04


Retanned goat- and kidskin leather, except leather of heading Nos 41.06 to 41.08


Retanning of goat and kidskin leather, not further prepared than tanned




ex 41.05


Other kinds of retanned leather, except leather of heading Nos 41.06 to 41.08


Retanning of other kinds of leather, not further prepared than tanned




ex 43.02


Assembled furskins


Bleaching, dyeing, dressing, cutting and assembling of tanned or dressed furskins




ex 50.09
ex 50.10
ex 51.04
ex 53.11
ex 53.12
ex 53.13
ex 54.05
ex 55.07
ex 55.08
ex 55.09
ex 56.07


Printed fabrics


Printing accompanied by finishing operations (bleaching, dressing, drying, steaming, burling, mending, impregnating, sanforizing, mercerizing) of fabrics the value of which does not exceed 47·5 % of the value of the finished product




ex 68.03


Articles of slate, including articles of agglomerated slate


Manufacture of articles of slate




ex 68.13


Articles of asbestos; articles of mixtures with a basis of asbestos or of mixtures with a basis of asbestos and magnesium carbonate


Manufacture of articles of asbestos or of mixtures with a basis of asbestos, or of mixtures with a basis of asbestos and magnesium carbonate




ex 68.15


Articles of mica, including bonded mica splittings on a support of paper or fabric


Manufacture of articles of mica




ex 70.10


Cut-glass bottles


Cutting of bottles the value of which does not exceed 50 % of the value of the finished product




ex 70.13


Cut glassware (other than articles of heading No 70.19) of a kind commonly used for table, kitchen, toilet or office purposes, for indoor decoration, or for similar uses


Cutting of glassware the value of which does not exceed 50 % of the value of the finished product




ex 70.20


Articles made from glass fibre


Manufacture from unworked glass fibre




ex 71.02


Precious and semi-precious stones, cut or otherwise worked, but not mounted, set or strung (except ungraded stones temporarily strung for convenience of transport)


Manufacture from unworked precious and semi-precious stones




ex 71.03


Synthetic or reconstructed precious or semi-precious stones, cut or otherwise worked, but not mounted, set or strung (except ungraded stones temporarily strung for convenience of transport)


Manufacture from unworked synthetic or reconstructed precious or semi-precious stones




ex 71.05


Silver and silver alloys, including silver gilt and platinum-plated silver, semi-manufactured


Rolling, drawing, beating or grinding of unwrought silver and silver alloys




ex 71.05


Silver, including silver gilt and platinum-plated silver, unwrought


Alloying or electrolytic separation of unwrought silver and silver alloys




ex 71.06


Rolled silver, semi-manufactured


Rolling, drawing, beating or grinding of unwrought rolled silver




ex 71.07


Gold, including platinum-plated gold, semi-manufactured


Rolling, drawing, beating or grinding of unwrought gold, including platinum-plated gold




ex 71.07


Gold, including platinum-plated gold, unwrought


Alloying or electrolytic separation of unwrought gold or gold alloys




ex 71.08


Rolled gold on base metal or silver, semi-manufactured


Rolling, drawing, beating or grinding of unwrought rolled gold on base metal or silver




ex 71.09


Platinum and other metals of the platinum group, semi-manufactured


Rolling, drawing, beating or grinding of unwrought platinum or other metals of the platinum group




ex 71.09


Platinum and other metals of the platinum group, unwrought


Alloying or electrolytic separation of unwrought platinum or other metals of the platinum group




ex 71.10


Rolled platinum or other platinum group metals, on base metal or precious metal, semi-manufactured


Rolling, drawing, beating or grinding of unwrought rolled platinum or other unwrought platinum group metals, on base metal or precious metal




ex 73.15


Alloy steel and high-carbon steel:


 










—


in the forms mentioned in heading Nos 73.07 to 73.13






Manufacture from products in the forms mentioned in heading No 73.06










—


in the forms mentioned in heading No 73.14






Manufacture from products in the forms mentioned in heading No 73.06 or 73.07




ex 74.01


Unrefined copper (blister copper and other)


Smelting of copper matte




ex 74.01


Refined copper


Fire-refining or electrolytic refining of unrefined copper (blister copper and other), copper waste or scrap




ex 74.01


Copper alloy


Fusion and thermal treatment of refined copper, copper waste or scrap




ex 75.01


Unwrought nickel (excluding electroplating anodes of heading No 75.05)


Refining by electrolysis, by fusion or chemically, of nickel mattes, nickel speiss and other intermediate products of nickel metallurgy




ex 77.04


Beryllium, wrought


Rolling, drawing or grinding of unwrought beryllium the value of which does not exceed 50 % of the value of the finished product




ex 81.01


Tungsten, wrought


Manufacture from unwrought tungsten the value of which does not exceed 50 % of the value of the finished product




ex 81.02


Molybdenum, wrought


Manufacture from unwrought molybdenum the value of which does not exceed 50 % of the value of the finished product




ex 81.03


Tantalum, wrought


Manufacture from unwrought tantalum the value of which does not exceed 50 % of the value of the finished product




ex 81.04


Other base metals, wrought


Manufacture from other base metals, unwrought, the value of which does not exceed 50 % of the value of the finished product




84.06


Internal combustion piston engines


Working, processing or assembly in which the value of the materials and parts used does not exceed 40 % of the value of the finished product




ex 84.08


Engines and motors, excluding reaction engines and gas turbines


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value or the finished product, and provided that at least 50 % in value of the materials and parts (1) used are originating products




84.16


Calendering and similar rolling machines (other than metal-working and metal-rolling machines and glass working machines) and cylinders therefor


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25 % of the value of the finished product




ex 84.17


Machinery, plant and similar laboratory equipment, whether or not electrically heated, for the treatment of materials by a process involving a change of temperature, for wood, paper pulp, paper and paperboard manufacturing industries


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25 % of the value of the finished product




84.31


Machinery for making or finishing cellulosic pulp, paper or paperboard


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25 % of the value of the finished product




84.33


Paper or paperboard cutting machines of all kinds; other machinery for making up paper pulp, paper or paperboard


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 25% of the value of the finished product




ex 84.41


Sewing machines, including furniture specially designed for sewing machines


Working, processing or assembly in which the value of the non-originating materials and parts used does not exceed 40 % of the value of the finished product, and provided that:






(a)


at least 50% of the materials and parts (1) used for assembly of the head (motor excluded) are originating products, and










(b)


the thread tension, crochet and zigzag mechanisms are originating products








87.06


Parts and accessories of the motor vehicles of heading Nos 87.01 to 87.03


Working, processing or assembly in which the value of the materials and parts used does not exceed 15 % of the value of the finished product




ex 95.01


Articles of tortoise-shell


Manufacture from worked tortoise-shell




ex 95.02


Articles of mother of pearl


Manufacture from worked mother of pearl




ex 95.03


Articles of ivory


Manufacture from worked ivory




ex 95.04


Articles of bone (excluding whalebone)


Manufacture from worked bone (excluding whalebone)




ex 95.05


Articles of horn, coral (natural or agglomerated) or of other animal carving material


Manufacture from worked horn, coral (natural or agglomerated) or other animal carving material




ex 95.06


Articles of vegetable carving material (for example, corozo)


Manufacture from worked vegetable carving material (for example, corozo)




ex 95.07


Articles of jet (and mineral substitutes for jet), amber, meerschaum, agglomerated amber and agglomerated meerschaum


Manufacture from worked jet (and mineral substitutes for jet), amber, meerschaum, agglomerated amber and agglomerated meerschaum




ex 98.11


Smoking pipes, pipe bowls, of wood, root or other materials


Manufacture from roughly shaped blocks






(1)  In determining the value of materials and parts, the following must be taken into account:






(a)


in respect of originating materials and parts, the first verifiable price paid, or the price which would be paid in case of sale, for the said products on the territory of the country where working, processing or assembly is carried out;










(b)


in respect of other materials and parts, the provisions of Article 6 of this Protocol determining:






(i)


the value of imported products,










(ii)


the value of products of undetermined origin.










ANNEX IV

LIST C


List of products excluded from the scope of this Protocol







CCT heading No


Description




ex 27.07


Assimilated aromatic oils as defined in Note 2 to Chapter 27, of which more than 65 % by volume distils at a temperature of up to 250oC (including mixtures of petroleum spirit and benzole), for use as power or heating fuels




27.09 to 27.16


Mineral oils and products of their distillation; bituminous substances; mineral waxes




ex 29.01


Hydrocarbons:






—


Acyclic










—


Cyclanes and cyclenes, excluding azulenes










—


Benzene, toluene, xylenes




for use as power or heating fuels




ex 34.03


Lubricating preparations containing petroleum oils or oils obtained from bituminous minerals, but not including preparations containing 70 % or more by weight of petroleum oils or of oils obtained from bituminous minerals




ex 34.04


Waxes with a basis of paraffin, of petroleum waxes, of waxes obtained from bituminous minerals, of slack wax or of scale wax




ex 38.14


Prepared additives for lubricants






ANNEX V














ANNEX VI
















PROTOCOL No 4
concerning certain provisions relating to Ireland
Notwithstanding Article 13 of the Agreement, the measures provided for in paragraphs 1 and 2 of Protocol No 6 and in Article 1 of Protocol No 7 of the ‘Act concerning the Conditions of Accession and the Adjustments to the Treaties’ on certain quantitative restrictions relating to Ireland and on imports of motor vehicles and the motor vehicle assembly industry in Ireland shall apply to Norway.



FINAL ACT
The representatives
OF THE EUROPEAN ECONOMIC COMMUNITY
and
OF THE KINGDOM OF NORWAY,
assembled at Brussels on this fourteenth day of May in the year one thousand nine hundred and seventy-three,
for the signature of the Agreement between the European Economic Community and the Kingdom of Norway,
at the time of signature of this Agreement,
have taken note of the declarations listed below and annexed to this Act:






1.


Declaration by the European Economic Community concerning Article 23 (1) of the Agreement,










2.


Declaration by the European Economic Community concerning the regional application of certain provisions of the Agreement.





Udfærdiget i Bruxelles, den fjortende maj nitten hundrede og treoghalvfjerds.
Geschehen zu Brüssel am vierzehnten Mai neunzehnhundertdreiundsiebzig.
Done at Brussels on this fourteenth day of May in the year one thousand nine hundred and seventy-three.
Fait à Bruxelles, le quatorze mai mil neuf cent soixante-treize.
Fatto a Bruxelles, addì quattordici maggio millenovecentosettantatré.
Gedaan te Brussel, de veertiende mei negentienhonderddrieënzeventig.
Utferdiget i Brussel, fjortende mai nitten hundre og syttitre.

På Rådet for De europæiske Fællesskabers vegne
Im Namen des Rates der Europäischen Gemeinschaften
In the name of the Council of the European Communities
Au nom du Conseil des Communautés européennes
A nome del Consiglio delle Comunità europee
Namens de Raad van de Europese Gemeenschappen





For Kongeriket Norge






DECLARATIONS
 

Declaration by the European Economic Community concerning Article 23 (1) of the Agreement
The European Economic Community declares that in the context of the autonomous implementation of Article 23 (1) of the Agreement which is incumbent on the Contracting Parties, it will assess any practices contrary to that Article on the basis of criteria arising from the application of the rules of Articles 85, 86, 90 and 92 of the Treaty establishing the European Economic Community.


Declaration by the European Economic Community concerning the regional application of certain provisions of the Agreement
The European Economic Community declares that the application of any measures it may take under Articles 23, 24, 25 or 26 of the Agreement, in accordance with the procedure and under the arrangements set out in Article 27, or under Article 28 may be limited to one of its regions by virtue of Community rules.