ccm/cmu-engineering-publications huggingface dataset:
Phase Change NEMS Relay
Faculty: Maarten de Boer, Gianluca (Gian) Piazza
Department: Electrical & Computer Engineering, Mechanical Engineering
Published in: 2019 IEEE International Electron Devices Meeting (IEDM), 34.1. 1-34.1. 4, 2019
Year: 2019
Topic: microsystems & electronic materials; CMOS-MEMS integration
Evaluation of High Oxygen Permeability Ionomer (HOPI) Oxygen Permeability for Proton Exchange Membrane Fuel Cells (PEMFCs)
Faculty: Shawn Litster
Department: Mechanical Engineering
Published in: Electrochemical Society Meeting Abstracts 242, 1514-1514, 2022
Year: 2022
Topic: electrochemistry & surface science; fuel cells
A Semiempirical Model for Post‐Yield Stress Instability in the Stress–Strain Response of 3D Lattice Structures under Compressive Loads
Faculty: Rahul Panat
Department: Biomedical Engineering, Mechanical Engineering
Published in: Advanced Engineering Materials 25 (12), 2201428, 2023
Year: 2023
Topic: materials processing & mechanics; dislocation mechanics
Orientation and Phase Relationships between Titania Films and Polycrystalline BaTiO3 Substrates as Determined by Electron Backscatter Diffraction Mapping
Faculty: Gregory Rohrer, Paul Salvador
Department: Materials Science & Engineering
Published in: Journal of the American Ceramic Society 93 (9), 2530-2533, 2010
Year: 2010
Topic: magnetic & functional materials; functional oxide thin films
An 18 nW− 47/− 40 dBm sensitivity 3/100 kbps MEMS-assisted CMOS wake-up receiver
Faculty: Gianluca (Gian) Piazza
Department: Electrical & Computer Engineering
Published in: IEEE Transactions on Circuits and Systems I: Regular Papers 66 (11), 4439-4447, 2019
Year: 2019
Topic: robotics, resonators & photonics; MEMS resonators
Control of Protein Absorption and Cell Adhesion: Effect of Polymer Grafting Density
Faculty: Newell R. Washburn
Department: Biomedical Engineering
Published in: Ying Mei, Tao Wu, Chang Xu, K J. Langenbach, John T. Elliott, Kathryn L …, 2005
Year: 2005
Topic: nanomaterials, therapeutics & particle physics; drug delivery & wound healing
Strain Hardening at Large Strains AD Rollett, UF Kocks, JD Embury*, MG Stout and RD Doherty** Los Alamos National Laboratory, New Mexico 87545, USA* McMaster University …
Faculty: Anthony Rollett
Department: Materials Science & Engineering
Published in: Strength of Metals and Alloys (ICSMA 8): Proceedings of the 8th …, 1989
Year: 1989
Biophysical Theory and Modeling-Tetrameric Mouse Acetylcholinesterase: Continuum Diffusion Rate Calculations by Solving the Steady-State Smoluchowski Equation Using Finite …
Faculty: Jessica Zhang
Department: Mechanical Engineering
Published in: Biophysical Journal 88 (3), 1659-1665, 2005
Year: 2005
Topic: cellular & biomolecular engineering; microneedles & drug delivery
Kibaek Lee, Junjun Zhu, Judy Shum, Yongjie Zhang, Satish C. Muluk, Ankur Chandra, Mark K. Eskandari & Ender
Faculty: Jessica Zhang
Department: Mechanical Engineering
Published in: Ann Biomed Eng 41, 562-576, 2013
Year: 2013
Topic: microsystems & electronic materials; nonlinear wave & flow dynamics
Exploring the voltage stability of birnessitic Bi-MnO2 cathodes formed in situ in NaOH and KOH-based electrolytes
Faculty: Jay Whitacre
Department: Engineering & Public Policy, Materials Science & Engineering
Published in: Journal of The Electrochemical Society 171 (3), 030524, 2024
Year: 2024
Topic: electrochemistry & surface science; lithium-ion batteries
Biophysical Theory and Modeling-Continuum Diffusion Reaction Rate Calculations of Wild-Type and Mutant Mouse Acetylcholinesterase: Adaptive Finite Element Analysis.
Faculty: Jessica Zhang
Department: Mechanical Engineering
Published in: Biophysical Journal 87 (3), 1558-1566, 2004
Year: 2004
Topic: cellular & biomolecular engineering; microneedles & drug delivery
Wound state monitoring by multiplexed, electrochemical, real-time, localized, inflammation-tracking nitric oxide sensor (MERLIN)
Faculty: Tzahi Cohen-Karni
Department: Biomedical Engineering, Materials Science & Engineering
Published in: bioRxiv, 2024.11. 12.623289, 2024
Year: 2024
Topic: cellular & biomolecular engineering; circulating tumor cells
A Combinatorial Study of LiyMnxNi2− x O 4 Cathode Materials Using Microfabricated Solid-State Electrochemical Cells
Faculty: Jay Whitacre
Department: Engineering & Public Policy, Materials Science & Engineering
Published in: Journal of The Electrochemical Society 150 (12), A1676, 2003
Year: 2003
Topic: electrochemistry & surface science; lithium-ion batteries
Reconfigurable 4-frequency CMOS oscillator based on AlN contour-mode MEMS resonators
Faculty: Gianluca (Gian) Piazza
Department: Electrical & Computer Engineering
Published in: 2010 IEEE International Ultrasonics Symposium, 1494-1497, 2010
Year: 2010
Topic: robotics, resonators & photonics; MEMS resonators
Stretchable Electronics: EGaIn‐Assisted Room‐Temperature Sintering of Silver Nanoparticles for Stretchable, Inkjet‐Printed, Thin‐Film Electronics (Adv. Mater. 29/2018)
Faculty: Carmel Majidi
Department: Mechanical Engineering
Published in: Advanced Materials 30 (29), 1870215, 2018
Year: 2018
Topic: microsystems & electronic materials; stretchable electronics
An ultra-compliant, scalable neural probe with molded biodissolvable delivery vehicle
Faculty: Gary Fedder, O. Burak Ozdoganlar, Douglas J. Weber
Department: Biomedical Engineering, Electrical & Computer Engineering, Mechanical Engineering
Published in: 2012 IEEE 25th international conference on micro electro mechanical systems …, 2012
Year: 2012
Topic: robotics, resonators & photonics; soft robotics
Structural and magnetic properties of Pr sub 3(Fe sub 1-x Co sub x) sub 27. 5 Ti sub 1. 5(x= 0. 0, 0. 1, 0. 2, 0. 3)
Faculty: Michael McHenry
Department: Materials Science & Engineering
Published in: Journal of Magnetism and Magnetic Materials(Netherlands) 190 (3), 233-239, 1998
Year: 1998
Topic: magnetic & functional materials; soft magnetic materials
Thin Film Synthesis of Copper-Based Perovskites Having Two-Dimensional Cation Order:(La0. 8Ba0. 2CuO2. 6±x)(AECuO2) n Superlattices
Faculty: Paul Salvador
Department: Materials Science & Engineering
Published in: MRS Online Proceedings Library (OPL) 547, 285, 1998
Year: 1998
Topic: magnetic & functional materials; pulsed-laser deposition
Coadsorption of sodium dodecyl sulfate with hydrophobically modified nonionic cellulose polymers. 2. Role of surface selectivity in adsorption hysteresis
Faculty: Robert D. Tilton
Department: Biomedical Engineering, Chemical Engineering
Published in: Langmuir 19 (7), 2714-2721, 2003
Year: 2003
Topic: soft materials & photonics; avalanche photodetectors
Understanding the Role of Interfaces in the Deformation of Lamellar Nanocomposites Fabricated via Severe Plastic Deformation Techniques
Faculty: Anthony Rollett
Department: Materials Science & Engineering
Published in: Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …, 2011
Year: 2011
Topic: soft materials & photonics; block copolymers
Impacts of pristine and transformed Ag and Cu engineered nanomaterials on surficial sediment microbial communities appear short-lived
Faculty: Kelvin Gregory, Gregory Lowry, Joe Moore
Department: Civil & Environmental Engineering
Published in: Environmental science & technology 50 (5), 2641-2651, 2016
Year: 2016
Topic: semiconductor & environmental nanomaterials; zero-valent iron nanoparticles
Demonstration of MOSFET-like on-current performance in arsenide/antimonide tunnel FETs with staggered hetero-junctions for 300mV logic applications
Faculty: Theresa Mayer
Department: Electrical & Computer Engineering, Materials Science & Engineering
Published in: 2011 International Electron Devices Meeting, 33.5. 1-33.5. 4, 2011
Year: 2011
Topic: semiconductor & environmental nanomaterials; silicon nanowires
Covalent Functionalization of Silicon with Plasma-Grown “Fuzzy” Graphene: Robust Aqueous Photoelectrodes for CO2 Reduction by Molecular Catalysts
Faculty: Tzahi Cohen-Karni
Department: Biomedical Engineering, Materials Science & Engineering
Published in: ACS Applied Materials & Interfaces 16 (29), 37885-37895, 2024
Year: 2024
Topic: magnetic & functional materials; magnetic & carbon thin films
Symmetric Poly(ethylene oxide-b-styrene-b-isoprene) Triblock Copolymers: Synthesis, Characterization, and Self-Assembly in Bulk and Thin Film
Faculty: Michael Bockstaller
Department: Materials Science & Engineering
Published in: Macromolecules 47 (18), 6373-6381, 2014
Year: 2014
Topic: nanomaterials, therapeutics & particle physics; carbon nanotubes
Transient thermometry and high-resolution analysis of filamentary resistive switches
Faculty: Jim Bain, Marek Skowronski
Department: Electrical & Computer Engineering, Materials Science & Engineering
Published in: Jonghan Kwon, Chao-Yang Chen, Abhishek Sharma, Andrea Fantini, Malgorzata …, 2016
Year: 2016
Topic: materials characterization & transport; microscopy & materials characterization
Substituent effects on stereoselectivity of dihalocarbene reactions with cyclohexadiene and on the reactivity of bis-dihalocyclopropanes in electrophilic nitrations en route to …
Faculty: Gabe Gomes
Department: Chemical Engineering
Published in: Organic & Biomolecular Chemistry 15 (44), 9433-9441, 2017
Year: 2017
Topic: process & materials engineering; chemical modeling & remediation
PMSE 495-Water and salt transport behavior through hydrophilic-hydrophobic copolymer membranes and their relations to reverse osmosis membrane performance
Faculty: Newell R. Washburn
Department: Biomedical Engineering
Published in: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY 232, 343-343, 2006
Year: 2006
Topic: soft materials & photonics; avalanche photodetectors
Adsorbed triblock copolymers deliver reactive iron nanoparticles to the oil/water interface
Faculty: Gregory Lowry, Robert D. Tilton
Department: Biomedical Engineering, Chemical Engineering, Civil & Environmental Engineering
Published in: Nano letters 5 (12), 2489-2494, 2005
Year: 2005
Topic: semiconductor & environmental nanomaterials; zero-valent iron nanoparticles
Graphene microelectrode arrays for electrical and optical measurements of human stem cell-derived cardiomyocytes
Faculty: Tzahi Cohen-Karni, Adam W. Feinberg
Department: Biomedical Engineering, Materials Science & Engineering
Published in: Cellular and Molecular Bioengineering 11 (5), 407-418, 2018
Year: 2018
Topic: cellular & biomolecular engineering; circulating tumor cells
12E-3 channel-select RF MEMS filters based on self-coupled AlN contour-mode piezoelectric resonators
Faculty: Gianluca (Gian) Piazza
Department: Electrical & Computer Engineering
Published in: 2007 IEEE Ultrasonics Symposium Proceedings, 1156-1159, 2007
Year: 2007
Topic: robotics, resonators & photonics; MEMS resonators
Evidence of Porphyrin-Like Structures in Natural Melanin Pigments Using Electrochemical Fingerprinting.
Faculty: Bettinger, Jay Whitacre
Department: Engineering & Public Policy, Materials Science & Engineering
Published in: Advanced Materials (Deerfield Beach, Fla.) 28 (16), 3173-3180, 2016
Year: 2016
Topic: cellular & biomolecular engineering; insulin-like growth factor
Nanowire-Mesh Templated Growth of Out-of-Plane Three-Dimensional Fuzzy Graphene
Faculty: Tzahi Cohen-Karni, Rahul Panat
Department: Biomedical Engineering, Mechanical Engineering, Materials Science & Engineering
Published in: US Patent App. 16/606,055, 2021
Year: 2021
Topic: semiconductor & environmental nanomaterials; silicon nanowires
Micrometer Scale X-ray CT-Informed Optimization of Heterogeneous Pore Distribution in Double Layered Thick LiNCM 811 Cathode
Faculty: Jay Whitacre
Department: Engineering & Public Policy, Materials Science & Engineering
Published in: Journal of The Electrochemical Society 171 (7), 070513, 2024
Year: 2024
Topic: electrochemistry & surface science; fuel cells
Microneedle Array-Mediated Intradermal Delivery of Tumor Necrosis Factor-Alpha-Inhibitors
Faculty: O. Burak Ozdoganlar, Newell R. Washburn
Department: Biomedical Engineering, Mechanical Engineering
Published in: TISSUE ENGINEERING PART A 20, S59-S59, 2014
Year: 2014
Topic: cellular & biomolecular engineering; microneedles & drug delivery
Polymer Coatings Affect Transport and Remobilization of Colloidal Activated Carbon in Saturated Sand Columns: Implications for In Situ Groundwater Remediation (Vol 58, pg 8531 …
Faculty: Gregory Lowry
Department: Civil & Environmental Engineering
Published in: ENVIRONMENTAL SCIENCE & TECHNOLOGY 58 (25), 11203-11203, 2024
Year: 2024
Topic: process & materials engineering; chemical modeling & remediation
Avaliação do potencial toxigênico de fungos filamentosos isolados de uvas e solo de vinhedos do vale do submédio São Francisco.
Faculty: Leonardo da Silva Sousa
Department: CMU Silicon Valley, Electrical & Computer Engineering
Published in: In: ENCONTRO NACIONAL DE MICOTOXINAS, 16., 2019, Belo Horizonte. Anais …, 2019
Year: 2019
Topic: optimization & control; design optimization & risk perception
Location-Dependent Phase Transformation Kinetics During Laser Wire Deposition Additive Manufacturing of Ti–6Al–4V
Faculty: P. Chris Pistorius, Anthony Rollett, Bryan Webler
Department: Materials Science & Engineering
Published in: Metallurgical and Materials Transactions A 55 (11), 4676-4692, 2024
Year: 2024
Topic: materials processing & mechanics; powder-bed fusion
A 18mw, 3.3 db nf, 60ghz lna in 32nm soi cmos technology with autonomic nf calibration
Faculty: Vanessa Chen
Department: Electrical & Computer Engineering
Published in: 2015 IEEE Radio Frequency Integrated Circuits Symposium (RFIC), 319-322, 2015
Year: 2015
Topic: computational modeling & circuits; analog & RF circuits
Influence of Shock Prestraining and Texture on the Dynamic-Tensile- Extrusion of High-Purity Zirconium
Faculty: Victoria Webster-Wood
Department: Mechanical Engineering
Published in: Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …, 2010
Year: 2010
Topic: materials processing & mechanics; X-ray diffraction & texture
Biocompatibility studies of sorbitol-containing polyesters. I. Synthesis, surface analysis and cell response in vitro.
Faculty: Newell R. Washburn
Department: Biomedical Engineering
Published in: ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY 226, U408-U408, 2003
Year: 2003
Topic: nanomaterials, therapeutics & particle physics; drug delivery & wound healing
Cyclic functional electrical stimulation does not enhance gains in hand grasp function when used as an adjunct to onabotulinumtoxinA and task practice therapy: a single-blind …
Faculty: Douglas J. Weber
Department: Biomedical Engineering, Mechanical Engineering
Published in: Archives of physical medicine and rehabilitation 91 (5), 679-686, 2010
Year: 2010
Topic: neural engineering & imaging; spinal cord stimulation
Developing a functional poly (dimethylsiloxane)-based microbial nanoculture system using dimethylallylamine
Faculty: Tagbo Herman Roland Niepa
Department: Biomedical Engineering, Chemical Engineering
Published in: ACS Applied Materials & Interfaces 12 (45), 50581-50591, 2020
Year: 2020
Topic: cellular & biomolecular engineering; microneedles & drug delivery
Reconfigurable AlN resonator filter design based on extended statistical element selection
Faculty: Gary Fedder, Gianluca (Gian) Piazza, Larry Pileggi
Department: Electrical & Computer Engineering
Published in: 2017 19th International Conference on Solid-State Sensors, Actuators and …, 2017
Year: 2017
Topic: robotics, resonators & photonics; MEMS resonators
Evaluation of poly (3, 4-ethylenedioxythiophene)/carbon nanotube neural electrode coatings for stimulation in the dorsal root ganglion
Faculty: Douglas J. Weber
Department: Biomedical Engineering, Mechanical Engineering
Published in: Journal of neural engineering 12 (1), 016008, 2014
Year: 2014
Topic: robotics, resonators & photonics; soft robotics
Evaluation of a proposal for reliable low-cost grid power with 100% wind, water, and solar
Faculty: Paulina Jaramillo, M. Granger Morgan, Jay Whitacre
Department: Electrical & Computer Engineering, Engineering & Public Policy, Materials Science & Engineering
Published in: Proceedings of the National Academy of Sciences 114 (26), 6722-6727, 2017
Year: 2017
Topic: power, energy & mobility; electricity systems & policy
Block copolymer templating as a path to porous nanostructured carbons with highly accessible nitrogens for enhanced (electro) chemical performance
Faculty: Jay Whitacre
Department: Engineering & Public Policy, Materials Science & Engineering
Published in: Macromolecular Chemistry and Physics 213 (10‐11), 1078-1090, 2012
Year: 2012
Topic: nanomaterials, therapeutics & particle physics; carbon nanotubes
Estimating attachment of nano-and submicrometer-particles coated with organic macromolecules in porous media: development of an empirical model
Faculty: Gregory Lowry, Robert D. Tilton
Department: Biomedical Engineering, Chemical Engineering, Civil & Environmental Engineering
Published in: Environmental science & technology 44 (12), 4531-4538, 2010
Year: 2010
Topic: semiconductor & environmental nanomaterials; zero-valent iron nanoparticles
A low-noise low-offset capacitive sensing amplifier for a 50-/spl mu/g//spl radic/Hz monolithic CMOS MEMS accelerometer
Faculty: Gary Fedder
Department: Electrical & Computer Engineering
Published in: IEEE Journal of Solid-State Circuits 39 (5), 722-730, 2004
Year: 2004
Topic: microsystems & electronic materials; CMOS-MEMS integration
Modeling Mesoscopic Plastic Flow Heterogeneities of 3 D Polycrystalline Microstructures Using Crystal-Plasticity FEM and FFT-Based Viscoplastic Model
Faculty: Anthony Rollett
Department: Materials Science & Engineering
Published in: Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box …, 2011
Year: 2011
Topic: materials processing & mechanics; dislocation mechanics
Micro-Patterning Directional Extracellular Matrix Cues in Hydrogel Scaffolds for Cardiac Tissue Engineering
Faculty: Adam W. Feinberg
Department: Biomedical Engineering, Materials Science & Engineering
Published in: TISSUE ENGINEERING PART A 21, S50-S51, 2015
Year: 2015
Topic: cellular & biomolecular engineering; extracellular matrix
A tunable notch filter using high-kt2 lithium niobate resonators toward integration in filter banks
Faculty: Gary Fedder, Gianluca (Gian) Piazza
Department: Electrical & Computer Engineering
Published in: 2015 IEEE MTT-S International Microwave Symposium, 1-4, 2015
Year: 2015
Topic: robotics, resonators & photonics; MEMS resonators
Hexahydro-1, 3, 5-trinitro-1, 3, 5-triazine transformation by biologically reduced ferrihydrite: evolution of Fe mineralogy, surface area, and reaction rates
Faculty: Kelvin Gregory
Department: Civil & Environmental Engineering
Published in: Environmental science & technology 39 (14), 5183-5189, 2005
Year: 2005
Topic: process & materials engineering; chemical modeling & remediation
Magnetic hysteresis and flux creep of YBa/sub 2/Cu/sub 3/O/sub x/grown by the melt-powder-melt-growth (MPMG) process
Faculty: Michael McHenry
Department: Materials Science & Engineering
Published in: IEEE transactions on applied superconductivity 3 (1), 1382-1385, 1993
Year: 1993
Topic: magnetic & functional materials; functional oxide thin films
Copolymer‐Derived N/B Co‐Doped Nanocarbons with Controlled Porosity and Highly Active Surface
Faculty: Jay Whitacre
Department: Engineering & Public Policy, Materials Science & Engineering
Published in: Journal of Polymer Science 58 (1), 225-232, 2020
Year: 2020
Topic: nanomaterials, therapeutics & particle physics; carbon nanotubes
In-Situ Structural Characterization of Ultra-Thin Epitaxial Metal Films and Multilayers Observed with Grazing Incidence X-Ray Scattering
Faculty: Jim Bain
Department: Electrical & Computer Engineering
Published in: Physics of X-Ray Multilayer Structures, WC. 1, 1994
Year: 1994
Topic: magnetic & functional materials; pulsed-laser deposition
Schottky barriers for Pt, Mo and Ti on 6H and 4H SiC (0001),(000-1),(1-100) and (1-210) faces measured by IV, CV and internal photoemission
Faculty: Lisa Porter
Department: Materials Science & Engineering
Published in: Materials Science Forum 433, 705-708, 2003
Year: 2003
Topic: semiconductor & environmental nanomaterials; silicon carbide materials
1.05-GHz CMOS oscillator based on lateral-field-excited piezoelectric AlN contour-mode MEMS resonators
Faculty: Gianluca (Gian) Piazza
Department: Electrical & Computer Engineering
Published in: IEEE transactions on ultrasonics, ferroelectrics, and frequency control 57 …, 2009
Year: 2009
Topic: robotics, resonators & photonics; MEMS resonators
Veno-venous extracorporeal membrane oxygenation with interatrial shunting: a novel approach to lung transplantation for patients in right ventricular failure
Faculty: Keith E. Cook
Department: Biomedical Engineering
Published in: The Journal of Thoracic and Cardiovascular Surgery 141 (2), 537-542. e1, 2011
Year: 2011
Topic: biomedical devices & modeling; artificial lungs
Analysis of In Vitro Cytotoxicity of Carbohydrate-Based Materials Used for Dissolvable Microneedle Arrays
Faculty: Phil G. Campbell, O. Burak Ozdoganlar
Department: Biomedical Engineering, Mechanical Engineering
Published in: Pharmaceutical research 37, 1-18, 2020
Year: 2020
Topic: cellular & biomolecular engineering; microneedles & drug delivery
Mevalonate Diphosphate Decarboxylase MVD/Erg19 Is Required for Ergosterol Biosynthesis, Growth, Sporulation and Stress Tolerance in Aspergillus oryzae
Faculty: Bin He
Department: Biomedical Engineering
Published in: Frontiers in Microbiology 10, 1074, 2019
Year: 2019
Topic: cellular & biomolecular engineering; cellular protein engineering
Low motional resistance ring-shaped contour-mode aluminum nitride piezoelectric micromechanical resonators for UHF applications
Faculty: Gianluca (Gian) Piazza
Department: Electrical & Computer Engineering
Published in: 18th IEEE International Conference on Micro Electro Mechanical Systems, 2005 …, 2005
Year: 2005
Topic: robotics, resonators & photonics; MEMS resonators
A 3/5 GHz reconfigurable CMOS low-noise amplifier integrated with a four-terminal phase-change RF switch
Faculty: Jim Bain
Department: Electrical & Computer Engineering
Published in: 2015 IEEE International Electron Devices Meeting (IEDM), 25.3. 1-25.3. 4, 2015
Year: 2015
Topic: robotics, resonators & photonics; MEMS resonators
An Analytical, Non-Dimensional Representation of Chip Area for Corner-Radiused Tools Under Depth-of-Cut and Feed Variations
Faculty: O. Burak Ozdoganlar
Department: Biomedical Engineering, Mechanical Engineering
Published in: ASME International Mechanical Engineering Congress and Exposition 16066, 251-258, 1998
Year: 1998
Topic: microsystems & electronic materials; nonlinear wave & flow dynamics
High-Tc superconductivity in potassium-doped fullerene, KxC60, via coupled C60 (pπ) cluster molecular orbitals and dynamic Jahn-Teller coupling
Faculty: Michael McHenry
Department: Materials Science & Engineering
Published in: Physica C: Superconductivity 183 (4-6), 319-323, 1991
Year: 1991
Topic: magnetic & functional materials; functional oxide thin films
Keeping up with emerging characterization methods of crystalline materials: Fast Fourier Transform-based modelling for the determination of micromechanical fields in polycrystals
Faculty: Anthony Rollett
Department: Materials Science & Engineering
Published in: Lebensohn, Anthony D. Rollett and Pierre Suquet 3, 13-18, 2011
Year: 2011
Topic: microsystems & electronic materials; microsystems & mechanics
PART 2-Chapter 6-SiC Devices-6.3 Bipolar Devices-Microstructural Characterization of Recombination-Induced Stacking Faults in High-Voltage SiC Diodes
Faculty: Marek Skowronski
Department: Materials Science & Engineering
Published in: Materials Science Forum 389, 1281-1284, 2002
Year: 2002
Topic: semiconductor & environmental nanomaterials; silicon carbide materials
High-Throughput Screening of Cell Proliferation on Poly (L-lactic acid)/Poly (D, L-lactic acid) Blends
Faculty: Newell R. Washburn
Department: Biomedical Engineering
Published in: Carl Simon Jr., Naomi Eidelman, Scott B. Kennedy, Amit Sehgal, C A. Khatri …, 2005
Year: 2005
Topic: nanomaterials, therapeutics & particle physics; drug delivery & wound healing