The student turns on the button of the M_6 machine.
text: Round circle underneath the handlebar to the right
text: There you go, press that.
text: Should turn blue. there is a lever to the left of that button. Pop that open and raise it up the device.
text: Pull that pull the lever of the  , yeah up that one. Pull that pull the power switch
text: Then pull up on that
text: It should raise the head of the plataform
text: There you go.
text: Now hold  the minor towards you
text: And inside you want to clip the one that looks like a tripod of the loop behind that
text: Not that one the one below
text: There you go
text: Mistress Navvis
text: So the very bottom we are going to um we are not going to do any updates that would get us some  time so lets  start mapping.
text: On the top where it says give a description so a number sign and speaking, right now take that off. back back space
text: Backspace of the , third button.
text: So at the ver top you see an X one two of no?
text: Look on the section yeah, so you see the X to the left of that I am not sure if its that one
text: One and over the left
text: There you go thats perfect
text: Now title the test
text: And clear off the other side
text: So your test one 0 one  something in the far right ?
text: so thats set up there you go . now we are done we have to say next
text: Well next this is where just things leads the item stir so we are going to calibrate for it . so thats again
text: Ok
text: next so here is just calibrating  um  stillness
text: All good