AndreaBozzo/ceres-open-data-index huggingface dataset:
COVID 19 Case Data

A feature layer containing COVID-19 case data for Minnehaha County, South Dakota. Data was updated based on case information from the [South Dakota Department of Health] and ranges from March 8, 2020 to April 19 2023. Notes: - According to the State of SD Department of Health, on June 20 2020, in reviewing addresses a number of addresses were realigned from Minnehaha to Lincoln County, resulting in a negative daily case number for Minnehaha. - No records will exist on November 26, 2020 as the State of SD Department of Health did not post any new updates that day. Instead case data for November 27, 2020 includes records for the 26th and the 27th. - No records will exist on December 25, 2020 as the State of SD Department of Health did not post any new updates that day. Instead case data for December 26, 2020 includes records for the 25th and the 26th. - No records will exist on January 1, 2021 as the State of SD Department of Health did not post any new updates that day. Instead case data for January 2, 2021 includes records for the 1st and the 2nd.
Flood Restrictions in the City (FRIC)

Feature layer containing Flood Restrictions in the City (FRIC) for Sioux Falls, South Dakota. Flood Restrictions in the City (FRIC) layer is not intended to be used for Flood Insurance determination. FRIC layer to be used by City of Sioux Falls for floodplain ordinance compliance. Data may need updates over time as new data becomes available. Contains Floodplain Insurance Rate Maps (FIRM), Bases Level Engineering (BLE), and Conditional Letter of Map Revision (CLOMR) data for areas around the City of Sioux Falls as of 2023. BLE data has not yet been adopted by FEMA, adoptions is estimated to be in 2024/2025. BLE is defined as the area without a detailed study from the FIRM where flooding has been modeling using LiDAR data and flood models, removing out areas that are too small or contain too low a depth of flooding.
Sanitary Availability

Feature layer containing authoritative sanitary availability polygons for Sioux Falls, South Dakota. This layer includes the areas where sanitary sewer is expected to be extended by the City of Sioux Falls, phased in tiers 1-3. Tier 1 is 0-5 years from present, tier 2 is 6-15 years out, and tier 3 is 16-25 years out.
Traffic Counts (Model)

Feature layer containing authoritative traffic count points for the traffic model for Sioux Falls, South Dakota. The data in the traffic counts model feature layer is collected for traffic count modeling and transportation planning. This data is collected on a five-to-seven-year basis, with data from 2001, 2008, 2013, 2018, and 2023. The traffic counts are 24-hour, weekday, two-directional counts. Traffic counts are normally collected during the summer months, but may be taken any season, as weather permits. The traffic counts are factored by the day of the week as well as by the month of the year to become an Average Annual Daily Total (AADT). Traffic volumes (i.e., count data) can fluctuate depending on the month, week, day of collection, the weather, type of road surface, nearby construction, etc. All the historical data should be averaged to reflect the "normal" traffic count. More specific count data (time, date, hourly volume) can be obtained from the Sioux Falls Engineering Division at 605-367-8601.
Traffic Counts

Feature layer containing authoritative traffic count points for Sioux Falls, South Dakota. The traffic counts listed are 24-hour, weekday, two-directional counts. Traffic counts are normally collected during the summer months, but may be taken any season, as weather permits. The traffic counts are factored by the day of the week as well as by the month of the year to become an Average Annual Daily Total (AADT). Traffic volumes (i.e. count data) can fluctuate depending on the month, week, day of collection; the weather, type of road surface, nearby construction, etc. All of the historical data should be averaged to reflect the "normal" traffic count. More specific count data (time, date, hourly volume) can be obtained from the Sioux Falls Engineering Division at 367-8601.