--- license: creativeml-openrail-m --- **civitai**:https://civitai.com/models/91609/unrealibrary-mix (更多预览在civitai/More preview in civitai) 所有的预览图没有使用embedding,lora 我的融合模型: **DreaMirror**:https://civitai.com/models/30294 / https://huggingface.co/Fre2C/DreaMirror-Mix **UnreaLibrary**:https://civitai.com/models/91609 / https://huggingface.co/Fre2C/UnreaLibrary-Mix **这个模型的方向是尽可能忠于提示词(在2D模型中这好像有点难),保留2D模型的创造性(所以我并没有融合3D/2.5D模型。~~所以大部分时间都在与手部进行搏斗~~),合适的明暗对比。** **你可以用它尝试任何东西！** **从以下地方学习了很多,十分感谢。** https://huggingface.co/WarriorMama777/OrangeMixs https://civitai.com/models/9409/or-anything-v5 https://economylife.net/u-net-marge-webui1111/ https://docs.qq.com/doc/DTkRodlJ1c1VzcFBr?u=e7c714671e694797a04f1d58aff5c8b0 https://docs.qq.com/doc/DQ1Vzd3VCTllFaXBv?_t=1685979317852&u=e7c714671e694797a04f1d58aff5c8b0 https://www.figma.com/file/1JYEljsTwm6qRwR665yI7w/Merging-lab%E3%80%8CHosioka-Fork%E3%80%8D?type=design&node-id=1-69 **使用建议:** 脸部出现崩坏的情况,以及想**提升面部质量**,使用**局部重绘** **重绘区域**使用**仅蒙版**(效果最好)获得**更好的面部**,或使用Hires. fix改善,使用**其他随机种**或者**工具**也是不错的办法。 **较高**的分辨率(比512 * 512高一点)再加上**Hires. fix**,图片质量**会更好**(如果显存不够你可以尝试**低倍率**的Hires. fix或者**其他放大方法**)。 **用于画面质量的正面提示词(像 best quality)是不必要的,会减少画面的可能性,还会使画面趋于一种风格。** **将你原本用在正面质量提示词上的权重,用在负面质量提示词上,那是更好的选择。** 如果觉得画面内容**不够丰富**,你可以尝试**细致地描述**,使画面更加**贴近你的想象**。 **提示词的权重以及顺序会影响它在画面里的重要程度。** **如果有无法作出反应的提示词,请按以下顺序排查问题:同义词(同一概念的不同描述),提示词冲突(正面和负面),模型问题(看其他模型能否对同样的提示词作出反应)**,embedding(我并没有使用它的习惯,但考虑到它的原理,我将它放上来作为参考)。 *如果你想用很少的提示词抽奖的话,最好把雨伞(umbrella)加进负面提示词(至少在V1是这样的)。* **我一般在效果不符合预期时使用clip2。** **随你喜好使用lora!** All preview images do not use embedding,lora. **The direction of this model is to be as faithful as possible to the prompt words(This seems a bit difficult in a 2D model), preserve the creativity of 2D models(So I did not merge the 3D/2.5D models. ~~So most of the time is fighting with the hands~~), appropriate light and dark contrast.** **You can try anything with it!** **I have learned a lot from the following places, thank you very much.** https://huggingface.co/WarriorMama777/OrangeMixs https://civitai.com/models/9409/or-anything-v5 https://economylife.net/u-net-marge-webui1111/ https://rentry.org/Merge_Block_Weight_-china-_v1_Beta#1-introduction(This is the translated version) https://docs.qq.com/doc/DQ1Vzd3VCTllFaXBv?_t=1685979317852&u=e7c714671e694797a04f1d58aff5c8b0 https://www.figma.com/file/1JYEljsTwm6qRwR665yI7w/Merging-lab%E3%80%8CHosioka-Fork%E3%80%8D?type=design&node-id=1-69 **Suggestions for use:** If the face appears to be falling apart, and you want to **improve the quality of the face**, use **Inpaint** and **Inpaint area** use **only Masked** (Best results) to get a **better face**, or use **Hires. fix** to improve, use **other seed** or **tools** is also a good way. **Higher** resolution (a little higher than 512 * 512) plus **Hires. fix**, picture quality will **be better** (if the gpu memory is not enough you can try a **Low magnification** of Hires. fix or **other upscale tools**). **Positive prompt for image quality (like best quality) are unnecessary and reduce the possibilities of the picture, also make the picture tend to be in a style.** **It's better to Use the weight you would have used for positive quality prompt on negative quality prompt.** If you feel that the content of the picture is **not rich enough**, You can try to **describe in detail** to make the picture more **closely to your imagination.** *If you want to sweepstakes with few prompts, it is better to add umbrella to the negative prompt (at least in V1).* **The weight of the prompt word and the order in which it is used affects how important it is in the picture.** **If there are prompt words that you cannot respond to, please rank the problems in the following order: synonyms (different descriptions of the same concept), prompt word conflicts (positive and negative), model problems (see if other models can respond to the same prompt words),** embedding (I am not in the habit of using it, but considering its rationale, I put it up as a reference). **I usually use clip2 when the results don't meet expectations.** **Use lora as you like!** 我使用这两个VAE/I use these two VAEs: https://huggingface.co/hakurei/waifu-diffusion-v1-4/blob/main/vae/kl-f8-anime2.ckpt https://civitai.com/models/22354/clearvae **V1** ![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/3124573465.png) ![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/1876586030.png) ![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/1210285340.png) ![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/1450654027.png) ![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/3519324115.png) ![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/2842647251.png) **使用的模型/Models used** kawaiimixNijiV5Cute_v10【58f37f4736】 Counterfeit-V3.0_fp32【17277FBE68】 pikasNewGeneration_v20【6C509880A5】 breakdomainanime_A0440【1870FA10C3】 plagion_v10【0C42B21C09】 AnythingV5V3_v5PrtRE【7f96a1a9ca】 tComicV35_v35【25750140EA】 **配方/Recipe** **use:https://github.com/hako-mikan/sd-webui-supermerger/** kawaiimixNijiV5Cute_v10 x (1-alpha) + Counterfeit-V3.0_fp32 x alpha)x(1-beta)+ pikasNewGeneration_v20 x beta alpha:0.7,1.0,0.9,0.8,0.7,0.6,0.6,0.7,0.8,0.9,0.7,0.5,0.7,0.7,0.85,0.75,0.65,0.75,0.85,0.75,0.65,0.75,0.85,0.9,0.8,0.8 beta:0.75,0.35,0.45,0.55,0.65,0.75,0.85,0.75,0.85,0.75,0.6,0.6,0.6,0.5,0.35,0.45,0.55,0.6,0.65,0.55,0.6,0.5,0.35,0.4,0.5,0.4 **Named as step1** breakdomainanime_A0440 x (1-alpha) + plagion_v10 x alpha)x(1-beta)+ step1 x beta alpha:0.25,0.35,0.45,0.55,0.65,0.55,0.45,0.55,0.4,0.6,0.7,0.75,0.8,0.4,0.4,0.5,0.6,0.7,0.8,0.6,0.5,0.4,0.5,0.4,0.7,0.7 beta:0.7,0.85,0.75,0.65,0.55,0.7,0.6,0.5,0.4,0.5,0.6,0.5,0.4,0.6,0.8,0.7,0.6,0.8,0.7,0.6,0.5,0.4,0.5,0.6,0.5,0.4 **Named as step2** AnythingV5V3_v5PrtRE x (1-alpha) + tComicV35_v35 x alpha)x(1-beta)+ step2 x beta alpha:0.65,0.75,0.65,0.75,0.65,0.75,0.65,0.75,0.85,1.0,0.85,0.75,0.85,0.4,0.65,0.75,0.65,0.45,0.3,0.15,0.3,0.45,0.65,0.75,0.8,0.8 beta:0.75,0.25,0.35,0.45,0.55,0.75,0.85,0.75,0.85,0.75,0.85,1.0,1.0,0.7,0.35,0.45,0.55,0.75,0.65,0.75,0.65,0.55,0.45,0.35,0.75,0.85 **prune and get final fp16 version**