README.md

---
license: creativeml-openrail-m
---
所有的预览图没有使用embedding,lora

我的融合模型:

DreaMirror:https://civitai.com/models/30294 / https://huggingface.co/Fre2C/DreaMirror-Mix


**这个模型的方向是尽可能忠于提示词(在2D模型中这好像有点难),保留2D模型的创造性(所以我并没有融合3D/2.5D模型。所以大部分时间都在与手部进行搏斗),合适的明暗对比。**

**你可以用它尝试任何东西！如果你觉得这个模型不错,可以评价一下以及上传你的图片。**

**从以下地方学习了很多,十分感谢。**

https://huggingface.co/WarriorMama777/OrangeMixs

https://civitai.com/models/9409/or-anything-v5

https://economylife.net/u-net-marge-webui1111/

https://docs.qq.com/doc/DTkRodlJ1c1VzcFBr?u=e7c714671e694797a04f1d58aff5c8b0

https://docs.qq.com/doc/DQ1Vzd3VCTllFaXBv?_t=1685979317852&u=e7c714671e694797a04f1d58aff5c8b0

https://www.figma.com/file/1JYEljsTwm6qRwR665yI7w/Merging-lab%E3%80%8CHosioka-Fork%E3%80%8D?type=design&node-id=1-69

**使用建议:**

脸部出现崩坏的情况,以及想**提升面部质量**,使用**局部重绘** **重绘区域**使用**仅蒙版**(效果最好)获得**更好的面部**,或使用Hires. fix改善,使用**其他随机种**或者**工具**也是不错的办法。

**较高**的分辨率(比512 * 512高一点)再加上**Hires. fix**,图片质量**会更好**(如果显存不够你可以尝试**低倍率**的Hires. fix或者**其他放大方法**)。

**用于画面质量的正面提示词(像 best quality)是不必要的,会减少画面的可能性,还会使画面趋于一种风格。**

**将你原本用在正面质量提示词上的权重,用在负面质量提示词上,那是更好的选择。**

如果觉得画面内容**不够丰富**,你可以尝试**细致地描述**,使画面更加**贴近你的想象**。

*如果你想用很少的提示词抽奖的话,最好把雨伞(umbrella)加进负面提示词(至少在V1是这样的)。*

我一般在效果不符合预期时使用clip2。

**随你喜好使用lora!**

All preview images do not use embedding,lora.

**The direction of this model is to be as faithful as possible to the prompt words(This seems a bit difficult in a 2D model), preserve the creativity of 2D models(So I did not merge the 3D/2.5D models. So most of the time is fighting with the hands), appropriate light and dark contrast.**

**You can try anything with it!**

**I have learned a lot from the following places, thank you very much.**

https://huggingface.co/WarriorMama777/OrangeMixs

https://civitai.com/models/9409/or-anything-v5

https://economylife.net/u-net-marge-webui1111/

https://rentry.org/Merge_Block_Weight_-china-_v1_Beta#1-introduction(This is the translated version)

https://docs.qq.com/doc/DQ1Vzd3VCTllFaXBv?_t=1685979317852&u=e7c714671e694797a04f1d58aff5c8b0

https://www.figma.com/file/1JYEljsTwm6qRwR665yI7w/Merging-lab%E3%80%8CHosioka-Fork%E3%80%8D?type=design&node-id=1-69

**Suggestions for use:**

If the face appears to be falling apart, and you want to **improve the quality of the face**, use **Inpaint** and **Inpaint area** use **only Masked** (Best results) to get a **better face**, or use **Hires. fix** to improve, use **other seed** or **tools** is also a good way.

**Higher** resolution (a little higher than 512 * 512) plus **Hires. fix**, picture quality will **be better** (if the gpu memory is not enough you can try a **Low magnification** of Hires. fix or **other upscale tools**).

**Positive prompt for image quality (like best quality) are unnecessary and reduce the possibilities of the picture, also make the picture tend to be in a style.**

**It's better to Use the weight you would have used for positive quality prompt on negative quality prompt.**

If you feel that the content of the picture is **not rich enough**, You can try to **describe in detail** to make the picture more **closely to your imagination.**

*If you want to sweepstakes with few prompts, it is better to add umbrella to the negative prompt (at least in V1).*

I usually use clip2 when the results don't meet expectations.

**Use lora as you like!**

我使用这两个VAE/I use these two VAEs:
https://huggingface.co/hakurei/waifu-diffusion-v1-4/blob/main/vae/kl-f8-anime2.ckpt
https://civitai.com/models/22354/clearvae

**V1**
![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/3124573465.png)
![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/1876586030.png)
![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/1210285340.png)
![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/1450654027.png)
![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/3519324115.png)
![image](https://raw.githubusercontent.com/Fre2C/UnreaLibrary/master/Preview/V1/2842647251.png)

**使用的模型/Models used**

kawaiimixNijiV5Cute_v10【58f37f4736】

Counterfeit-V3.0_fp32【17277FBE68】

pikasNewGeneration_v20【6C509880A5】

breakdomainanime_A0440【1870FA10C3】

plagion_v10【0C42B21C09】

AnythingV5V3_v5PrtRE【7f96a1a9ca】

tComicV35_v35【25750140EA】

**配方/Recipe**

**use:https://github.com/hako-mikan/sd-webui-supermerger/**

kawaiimixNijiV5Cute_v10 x (1-alpha) + Counterfeit-V3.0_fp32 x alpha)x(1-beta)+  pikasNewGeneration_v20 x beta 
alpha:0.7,1.0,0.9,0.8,0.7,0.6,0.6,0.7,0.8,0.9,0.7,0.5,0.7,0.7,0.85,0.75,0.65,0.75,0.85,0.75,0.65,0.75,0.85,0.9,0.8,0.8
beta:0.75,0.35,0.45,0.55,0.65,0.75,0.85,0.75,0.85,0.75,0.6,0.6,0.6,0.5,0.35,0.45,0.55,0.6,0.65,0.55,0.6,0.5,0.35,0.4,0.5,0.4

**named as step1**

AnythingV5V3_v5PrtRE x (1-alpha) + tComicV35_v35 x alpha)x(1-beta)+  test step2 x beta
alpha:0.65,0.75,0.65,0.75,0.65,0.75,0.65,0.75,0.85,1.0,0.85,0.75,0.85,0.4,0.65,0.75,0.65,0.45,0.3,0.15,0.3,0.45,0.65,0.75,0.8,0.8
beta:0.75,0.25,0.35,0.45,0.55,0.75,0.85,0.75,0.85,0.75,0.85,1.0,1.0,0.7,0.35,0.45,0.55,0.75,0.65,0.75,0.65,0.55,0.45,0.35,0.75,0.85

**prune and get final fp16 version**