---
tags:
- stable diffusion
- animatediff
- motion lora
language:
- en
---
| Name                                           | Resolution (w/h) | Frames | Comments          |
| ---------------------------------------------- | ---------------- | ------ | ----------------- |
| 250_cseti_Drone-Rotating_3D_footage_fr16       | 384x384 (1:1)    | 16     | Drone 3d rotation |
| 400_cseti_9222750_drone-rot_w576_h384_fr32_r64 | 576x384 (3:2)    | 32     | Drone 3d rotation |
| 200_3723723_cseti_ballerina-spin_w512_h768_r64 | 512x768 (2:3)    | 16     | Ballerina spin    |
| 250_3723723_cseti_ballerina-spin_w512_h768_r64 | 512x768 (2:3)    | 16     | Ballerina spin    |

<b>General recommendations:</b>
- These are finetuned on v3 model. Does not work with v2 or animateLCM motion models propely
- Animatediff v3 adapter lora is recommended
- If you want more motion try incrasing the scale multival (e.g. to 1.2)

<b>Drone LORA:</b>

- This LORA is trained on 384x384 so use these resolutions for generating the animation then upscale
- For more motion, try incrasing the LORA strength or try adding the below trigger words to your prompt
- Try trigger words: dronearound, flying around

<b>Ballerina spin LORA:</b>

- These LORAs were trained on 512x768 (w x h) so use these resolutions for generating the animation then upscale
- Sometimes a white veil / skirt appears during rotation. Unfortunately, this is from the original video. In such cases, try a new generation or reduce the LORA strength.
- I recommend using LORA strength of 0.8-0.9